{
SynthIce40Pass() : ScriptPass("synth_ice40", "synthesis for iCE40 FPGAs") { }
- virtual void help() YS_OVERRIDE
+ void help() YS_OVERRIDE
{
// |---v---|---v---|---v---|---v---|---v---|---v---|---v---|---v---|---v---|---v---|
log("\n");
log("This command runs synthesis for iCE40 FPGAs.\n");
log("\n");
log(" -top <module>\n");
- log(" use the specified module as top module (default='top')\n");
+ log(" use the specified module as top module\n");
log("\n");
log(" -blif <file>\n");
log(" write the design to the specified BLIF file. writing of an output file\n");
log(" is omitted if this parameter is not specified.\n");
log("\n");
log(" -edif <file>\n");
- log(" write the design to the specified edif file. writing of an output file\n");
+ log(" write the design to the specified EDIF file. writing of an output file\n");
+ log(" is omitted if this parameter is not specified.\n");
+ log("\n");
+ log(" -json <file>\n");
+ log(" write the design to the specified JSON file. writing of an output file\n");
log(" is omitted if this parameter is not specified.\n");
log("\n");
log(" -run <from_label>:<to_label>\n");
log(" -retime\n");
log(" run 'abc' with -dff option\n");
log("\n");
+ log(" -relut\n");
+ log(" combine LUTs after synthesis\n");
+ log("\n");
log(" -nocarry\n");
log(" do not use SB_CARRY cells in output netlist\n");
log("\n");
+ log(" -nodffe\n");
+ log(" do not use SB_DFFE* cells in output netlist\n");
+ log("\n");
+ log(" -dffe_min_ce_use <min_ce_use>\n");
+ log(" do not use SB_DFFE* cells if the resulting CE line would go to less\n");
+ log(" than min_ce_use SB_DFFE*in output netlist\n");
+ log("\n");
log(" -nobram\n");
log(" do not use SB_RAM40_4K* cells in output netlist\n");
log("\n");
+ log(" -dsp\n");
+ log(" use iCE40 UltraPlus DSP cells for large arithmetic\n");
+ log("\n");
+ log(" -noabc\n");
+ log(" use built-in Yosys LUT techmapping instead of abc\n");
+ log("\n");
log(" -abc2\n");
log(" run two passes of 'abc' for slightly improved logic density\n");
log("\n");
+ log(" -vpr\n");
+ log(" generate an output netlist (and BLIF file) suitable for VPR\n");
+ log(" (this feature is experimental and incomplete)\n");
+ log("\n");
log("\n");
log("The following commands are executed by this synthesis command:\n");
help_script();
log("\n");
}
- string top_opt, blif_file, edif_file;
- bool nocarry, nobram, flatten, retime, abc2;
+ string top_opt, blif_file, edif_file, json_file;
+ bool nocarry, nodffe, nobram, dsp, flatten, retime, relut, noabc, abc2, vpr;
+ int min_ce_use;
- virtual void clear_flags() YS_OVERRIDE
+ void clear_flags() YS_OVERRIDE
{
top_opt = "-auto-top";
blif_file = "";
edif_file = "";
+ json_file = "";
nocarry = false;
+ nodffe = false;
+ min_ce_use = -1;
nobram = false;
+ dsp = false;
flatten = true;
retime = false;
+ relut = false;
+ noabc = false;
abc2 = false;
+ vpr = false;
}
- virtual void execute(std::vector<std::string> args, RTLIL::Design *design) YS_OVERRIDE
+ void execute(std::vector<std::string> args, RTLIL::Design *design) YS_OVERRIDE
{
string run_from, run_to;
clear_flags();
edif_file = args[++argidx];
continue;
}
+ if (args[argidx] == "-json" && argidx+1 < args.size()) {
+ json_file = args[++argidx];
+ continue;
+ }
if (args[argidx] == "-run" && argidx+1 < args.size()) {
size_t pos = args[argidx+1].find(':');
if (pos == std::string::npos)
retime = true;
continue;
}
+ if (args[argidx] == "-relut") {
+ relut = true;
+ continue;
+ }
if (args[argidx] == "-nocarry") {
nocarry = true;
continue;
}
+ if (args[argidx] == "-nodffe") {
+ nodffe = true;
+ continue;
+ }
+ if (args[argidx] == "-dffe_min_ce_use" && argidx+1 < args.size()) {
+ min_ce_use = std::stoi(args[++argidx]);
+ continue;
+ }
if (args[argidx] == "-nobram") {
nobram = true;
continue;
}
+ if (args[argidx] == "-dsp") {
+ dsp = true;
+ continue;
+ }
+ if (args[argidx] == "-noabc") {
+ noabc = true;
+ continue;
+ }
if (args[argidx] == "-abc2") {
abc2 = true;
continue;
}
+ if (args[argidx] == "-vpr") {
+ vpr = true;
+ continue;
+ }
break;
}
extra_args(args, argidx, design);
if (!design->full_selection())
- log_cmd_error("This comannd only operates on fully selected designs!\n");
+ log_cmd_error("This command only operates on fully selected designs!\n");
log_header(design, "Executing SYNTH_ICE40 pass.\n");
log_push();
log_pop();
}
- virtual void script() YS_OVERRIDE
+ void script() YS_OVERRIDE
{
if (check_label("begin"))
{
run("read_verilog -lib +/ice40/cells_sim.v");
run(stringf("hierarchy -check %s", help_mode ? "-top <top>" : top_opt.c_str()));
+ run("proc");
}
if (flatten && check_label("flatten", "(unless -noflatten)"))
{
- run("proc");
run("flatten");
run("tribuf -logic");
run("deminout");
if (check_label("coarse"))
{
- run("synth -run coarse");
+ run("opt_expr");
+ run("opt_clean");
+ run("check");
+ run("opt");
+ run("wreduce");
+ run("peepopt");
+ run("opt_clean");
+ run("share");
+ run("techmap -map +/cmp2lut.v -D LUT_WIDTH=4");
+ run("opt_expr");
+ run("opt_clean");
+ if (help_mode || dsp)
+ run("ice40_dsp", "(if -dsp)");
+ run("alumacc");
+ run("opt");
+ run("fsm");
+ run("opt -fast");
+ run("memory -nomap");
+ run("opt_clean");
}
if (!nobram && check_label("bram", "(skip if -nobram)"))
{
run("memory_bram -rules +/ice40/brams.txt");
run("techmap -map +/ice40/brams_map.v");
+ run("ice40_braminit");
}
- if (check_label("fine"))
+ if (check_label("map"))
{
run("opt -fast -mux_undef -undriven -fine");
run("memory_map");
run("opt -undriven -fine");
+ }
+
+ if (check_label("map_gates"))
+ {
if (nocarry)
run("techmap");
else
if (check_label("map_ffs"))
{
run("dffsr2dff");
- run("dff2dffe -direct-match $_DFF_*");
- run("techmap -map +/ice40/cells_map.v");
+ if (!nodffe)
+ run("dff2dffe -direct-match $_DFF_*");
+ if (min_ce_use >= 0) {
+ run("opt_merge");
+ run(stringf("dff2dffe -unmap-mince %d", min_ce_use));
+ }
+ run("techmap -D NO_LUT -map +/ice40/cells_map.v");
run("opt_expr -mux_undef");
run("simplemap");
run("ice40_ffinit");
run("ice40_opt", "(only if -abc2)");
}
run("techmap -map +/ice40/latches_map.v");
- run("abc -lut 4");
+ if (noabc || help_mode) {
+ run("simplemap", " (only if -noabc)");
+ run("techmap -map +/gate2lut.v -D LUT_WIDTH=4", "(only if -noabc)");
+ }
+ if (!noabc) {
+ run("abc -dress -lut 4", "(skip if -noabc)");
+ }
run("clean");
+ if (relut || help_mode) {
+ run("ice40_unlut", " (only if -relut)");
+ run("opt_lut -dlogic SB_CARRY:I0=1:I1=2:CI=3", "(only if -relut)");
+ }
}
if (check_label("map_cells"))
{
- run("techmap -map +/ice40/cells_map.v");
+ if (vpr)
+ run("techmap -D NO_LUT -map +/ice40/cells_map.v");
+ else
+ run("techmap -map +/ice40/cells_map.v", "(with -D NO_LUT in vpr mode)");
+
run("clean");
}
if (check_label("blif"))
{
- if (!blif_file.empty() || help_mode)
- run(stringf("write_blif -gates -attr -param %s", help_mode ? "<file-name>" : blif_file.c_str()));
+ if (!blif_file.empty() || help_mode) {
+ if (vpr || help_mode) {
+ run(stringf("opt_clean -purge"),
+ " (vpr mode)");
+ run(stringf("write_blif -attr -cname -conn -param %s",
+ help_mode ? "<file-name>" : blif_file.c_str()),
+ " (vpr mode)");
+ }
+ if (!vpr)
+ run(stringf("write_blif -gates -attr -param %s",
+ help_mode ? "<file-name>" : blif_file.c_str()),
+ " (non-vpr mode)");
+ }
}
if (check_label("edif"))
if (!edif_file.empty() || help_mode)
run(stringf("write_edif %s", help_mode ? "<file-name>" : edif_file.c_str()));
}
+
+ if (check_label("json"))
+ {
+ if (!json_file.empty() || help_mode)
+ run(stringf("write_json %s", help_mode ? "<file-name>" : json_file.c_str()));
+ }
}
} SynthIce40Pass;
projects / yosys.git / blobdiff