sim_ticks 2332810264000 # Number of ticks simulated
final_tick 2332810264000 # Number of ticks from beginning of simulation (restored from checkpoints and never reset)
sim_freq 1000000000000 # Frequency of simulated ticks
-host_inst_rate 1522133 # Simulator instruction rate (inst/s)
-host_op_rate 1957369 # Simulator op (including micro ops) rate (op/s)
-host_tick_rate 58780416325 # Simulator tick rate (ticks/s)
-host_mem_usage 396116 # Number of bytes of host memory used
-host_seconds 39.70 # Real time elapsed on the host
+host_inst_rate 1754227 # Simulator instruction rate (inst/s)
+host_op_rate 2255827 # Simulator op (including micro ops) rate (op/s)
+host_tick_rate 67743178392 # Simulator tick rate (ticks/s)
+host_mem_usage 394608 # Number of bytes of host memory used
+host_seconds 34.44 # Real time elapsed on the host
sim_insts 60408639 # Number of instructions simulated
sim_ops 77681819 # Number of ops (including micro ops) simulated
system.physmem.bytes_read::realview.clcd 111673344 # Number of bytes read from this memory
system.physmem.bw_total::cpu.inst 302262 # Total bandwidth to/from this memory (bytes/s)
system.physmem.bw_total::cpu.data 5181496 # Total bandwidth to/from this memory (bytes/s)
system.physmem.bw_total::total 54942169 # Total bandwidth to/from this memory (bytes/s)
-system.physmem.readReqs 0 # Total number of read requests accepted by DRAM controller
-system.physmem.writeReqs 0 # Total number of write requests accepted by DRAM controller
-system.physmem.readBursts 0 # Total number of DRAM read bursts. Each DRAM read request translates to either one or multiple DRAM read bursts
-system.physmem.writeBursts 0 # Total number of DRAM write bursts. Each DRAM write request translates to either one or multiple DRAM write bursts
-system.physmem.bytesRead 0 # Total number of bytes read from memory
-system.physmem.bytesWritten 0 # Total number of bytes written to memory
-system.physmem.bytesConsumedRd 0 # bytesRead derated as per pkt->getSize()
-system.physmem.bytesConsumedWr 0 # bytesWritten derated as per pkt->getSize()
-system.physmem.servicedByWrQ 0 # Number of DRAM read bursts serviced by write Q
-system.physmem.neitherReadNorWrite 0 # Reqs where no action is needed
-system.physmem.perBankRdReqs::0 0 # Track reads on a per bank basis
-system.physmem.perBankRdReqs::1 0 # Track reads on a per bank basis
-system.physmem.perBankRdReqs::2 0 # Track reads on a per bank basis
-system.physmem.perBankRdReqs::3 0 # Track reads on a per bank basis
-system.physmem.perBankRdReqs::4 0 # Track reads on a per bank basis
-system.physmem.perBankRdReqs::5 0 # Track reads on a per bank basis
-system.physmem.perBankRdReqs::6 0 # Track reads on a per bank basis
-system.physmem.perBankRdReqs::7 0 # Track reads on a per bank basis
-system.physmem.perBankRdReqs::8 0 # Track reads on a per bank basis
-system.physmem.perBankRdReqs::9 0 # Track reads on a per bank basis
-system.physmem.perBankRdReqs::10 0 # Track reads on a per bank basis
-system.physmem.perBankRdReqs::11 0 # Track reads on a per bank basis
-system.physmem.perBankRdReqs::12 0 # Track reads on a per bank basis
-system.physmem.perBankRdReqs::13 0 # Track reads on a per bank basis
-system.physmem.perBankRdReqs::14 0 # Track reads on a per bank basis
-system.physmem.perBankRdReqs::15 0 # Track reads on a per bank basis
-system.physmem.perBankWrReqs::0 0 # Track writes on a per bank basis
-system.physmem.perBankWrReqs::1 0 # Track writes on a per bank basis
-system.physmem.perBankWrReqs::2 0 # Track writes on a per bank basis
-system.physmem.perBankWrReqs::3 0 # Track writes on a per bank basis
-system.physmem.perBankWrReqs::4 0 # Track writes on a per bank basis
-system.physmem.perBankWrReqs::5 0 # Track writes on a per bank basis
-system.physmem.perBankWrReqs::6 0 # Track writes on a per bank basis
-system.physmem.perBankWrReqs::7 0 # Track writes on a per bank basis
-system.physmem.perBankWrReqs::8 0 # Track writes on a per bank basis
-system.physmem.perBankWrReqs::9 0 # Track writes on a per bank basis
-system.physmem.perBankWrReqs::10 0 # Track writes on a per bank basis
-system.physmem.perBankWrReqs::11 0 # Track writes on a per bank basis
-system.physmem.perBankWrReqs::12 0 # Track writes on a per bank basis
-system.physmem.perBankWrReqs::13 0 # Track writes on a per bank basis
-system.physmem.perBankWrReqs::14 0 # Track writes on a per bank basis
-system.physmem.perBankWrReqs::15 0 # Track writes on a per bank basis
-system.physmem.numRdRetry 0 # Number of times rd buffer was full causing retry
-system.physmem.numWrRetry 0 # Number of times wr buffer was full causing retry
-system.physmem.totGap 0 # Total gap between requests
-system.physmem.readPktSize::0 0 # Categorize read packet sizes
-system.physmem.readPktSize::1 0 # Categorize read packet sizes
-system.physmem.readPktSize::2 0 # Categorize read packet sizes
-system.physmem.readPktSize::3 0 # Categorize read packet sizes
-system.physmem.readPktSize::4 0 # Categorize read packet sizes
-system.physmem.readPktSize::5 0 # Categorize read packet sizes
-system.physmem.readPktSize::6 0 # Categorize read packet sizes
-system.physmem.writePktSize::0 0 # Categorize write packet sizes
-system.physmem.writePktSize::1 0 # Categorize write packet sizes
-system.physmem.writePktSize::2 0 # Categorize write packet sizes
-system.physmem.writePktSize::3 0 # Categorize write packet sizes
-system.physmem.writePktSize::4 0 # Categorize write packet sizes
-system.physmem.writePktSize::5 0 # Categorize write packet sizes
-system.physmem.writePktSize::6 0 # Categorize write packet sizes
-system.physmem.rdQLenPdf::0 0 # What read queue length does an incoming req see
-system.physmem.rdQLenPdf::1 0 # What read queue length does an incoming req see
-system.physmem.rdQLenPdf::2 0 # What read queue length does an incoming req see
-system.physmem.rdQLenPdf::3 0 # What read queue length does an incoming req see
-system.physmem.rdQLenPdf::4 0 # What read queue length does an incoming req see
-system.physmem.rdQLenPdf::5 0 # What read queue length does an incoming req see
-system.physmem.rdQLenPdf::6 0 # What read queue length does an incoming req see
-system.physmem.rdQLenPdf::7 0 # What read queue length does an incoming req see
-system.physmem.rdQLenPdf::8 0 # What read queue length does an incoming req see
-system.physmem.rdQLenPdf::9 0 # What read queue length does an incoming req see
-system.physmem.rdQLenPdf::10 0 # What read queue length does an incoming req see
-system.physmem.rdQLenPdf::11 0 # What read queue length does an incoming req see
-system.physmem.rdQLenPdf::12 0 # What read queue length does an incoming req see
-system.physmem.rdQLenPdf::13 0 # What read queue length does an incoming req see
-system.physmem.rdQLenPdf::14 0 # What read queue length does an incoming req see
-system.physmem.rdQLenPdf::15 0 # What read queue length does an incoming req see
-system.physmem.rdQLenPdf::16 0 # What read queue length does an incoming req see
-system.physmem.rdQLenPdf::17 0 # What read queue length does an incoming req see
-system.physmem.rdQLenPdf::18 0 # What read queue length does an incoming req see
-system.physmem.rdQLenPdf::19 0 # What read queue length does an incoming req see
-system.physmem.rdQLenPdf::20 0 # What read queue length does an incoming req see
-system.physmem.rdQLenPdf::21 0 # What read queue length does an incoming req see
-system.physmem.rdQLenPdf::22 0 # What read queue length does an incoming req see
-system.physmem.rdQLenPdf::23 0 # What read queue length does an incoming req see
-system.physmem.rdQLenPdf::24 0 # What read queue length does an incoming req see
-system.physmem.rdQLenPdf::25 0 # What read queue length does an incoming req see
-system.physmem.rdQLenPdf::26 0 # What read queue length does an incoming req see
-system.physmem.rdQLenPdf::27 0 # What read queue length does an incoming req see
-system.physmem.rdQLenPdf::28 0 # What read queue length does an incoming req see
-system.physmem.rdQLenPdf::29 0 # What read queue length does an incoming req see
-system.physmem.rdQLenPdf::30 0 # What read queue length does an incoming req see
-system.physmem.rdQLenPdf::31 0 # What read queue length does an incoming req see
-system.physmem.wrQLenPdf::0 0 # What write queue length does an incoming req see
-system.physmem.wrQLenPdf::1 0 # What write queue length does an incoming req see
-system.physmem.wrQLenPdf::2 0 # What write queue length does an incoming req see
-system.physmem.wrQLenPdf::3 0 # What write queue length does an incoming req see
-system.physmem.wrQLenPdf::4 0 # What write queue length does an incoming req see
-system.physmem.wrQLenPdf::5 0 # What write queue length does an incoming req see
-system.physmem.wrQLenPdf::6 0 # What write queue length does an incoming req see
-system.physmem.wrQLenPdf::7 0 # What write queue length does an incoming req see
-system.physmem.wrQLenPdf::8 0 # What write queue length does an incoming req see
-system.physmem.wrQLenPdf::9 0 # What write queue length does an incoming req see
-system.physmem.wrQLenPdf::10 0 # What write queue length does an incoming req see
-system.physmem.wrQLenPdf::11 0 # What write queue length does an incoming req see
-system.physmem.wrQLenPdf::12 0 # What write queue length does an incoming req see
-system.physmem.wrQLenPdf::13 0 # What write queue length does an incoming req see
-system.physmem.wrQLenPdf::14 0 # What write queue length does an incoming req see
-system.physmem.wrQLenPdf::15 0 # What write queue length does an incoming req see
-system.physmem.wrQLenPdf::16 0 # What write queue length does an incoming req see
-system.physmem.wrQLenPdf::17 0 # What write queue length does an incoming req see
-system.physmem.wrQLenPdf::18 0 # What write queue length does an incoming req see
-system.physmem.wrQLenPdf::19 0 # What write queue length does an incoming req see
-system.physmem.wrQLenPdf::20 0 # What write queue length does an incoming req see
-system.physmem.wrQLenPdf::21 0 # What write queue length does an incoming req see
-system.physmem.wrQLenPdf::22 0 # What write queue length does an incoming req see
-system.physmem.wrQLenPdf::23 0 # What write queue length does an incoming req see
-system.physmem.wrQLenPdf::24 0 # What write queue length does an incoming req see
-system.physmem.wrQLenPdf::25 0 # What write queue length does an incoming req see
-system.physmem.wrQLenPdf::26 0 # What write queue length does an incoming req see
-system.physmem.wrQLenPdf::27 0 # What write queue length does an incoming req see
-system.physmem.wrQLenPdf::28 0 # What write queue length does an incoming req see
-system.physmem.wrQLenPdf::29 0 # What write queue length does an incoming req see
-system.physmem.wrQLenPdf::30 0 # What write queue length does an incoming req see
-system.physmem.wrQLenPdf::31 0 # What write queue length does an incoming req see
-system.physmem.bytesPerActivate::mean nan # Bytes accessed per row activation
-system.physmem.bytesPerActivate::gmean nan # Bytes accessed per row activation
-system.physmem.bytesPerActivate::stdev nan # Bytes accessed per row activation
-system.physmem.totQLat 0 # Total cycles spent in queuing delays
-system.physmem.totMemAccLat 0 # Sum of mem lat for all requests
-system.physmem.totBusLat 0 # Total cycles spent in databus access
-system.physmem.totBankLat 0 # Total cycles spent in bank access
-system.physmem.avgQLat nan # Average queueing delay per request
-system.physmem.avgBankLat nan # Average bank access latency per request
-system.physmem.avgBusLat nan # Average bus latency per request
-system.physmem.avgMemAccLat nan # Average memory access latency
-system.physmem.avgRdBW 0.00 # Average achieved read bandwidth in MB/s
-system.physmem.avgWrBW 0.00 # Average achieved write bandwidth in MB/s
-system.physmem.avgConsumedRdBW 0.00 # Average consumed read bandwidth in MB/s
-system.physmem.avgConsumedWrBW 0.00 # Average consumed write bandwidth in MB/s
-system.physmem.peakBW 12800.00 # Theoretical peak bandwidth in MB/s
-system.physmem.busUtil 0.00 # Data bus utilization in percentage
-system.physmem.avgRdQLen 0.00 # Average read queue length over time
-system.physmem.avgWrQLen 0.00 # Average write queue length over time
-system.physmem.readRowHits 0 # Number of row buffer hits during reads
-system.physmem.writeRowHits 0 # Number of row buffer hits during writes
-system.physmem.readRowHitRate nan # Row buffer hit rate for reads
-system.physmem.writeRowHitRate nan # Row buffer hit rate for writes
-system.physmem.avgGap nan # Average gap between requests
system.realview.nvmem.bytes_read::cpu.inst 20 # Number of bytes read from this memory
system.realview.nvmem.bytes_read::total 20 # Number of bytes read from this memory
system.realview.nvmem.bytes_inst_read::cpu.inst 20 # Number of instructions bytes read from this memory
projects / gem5.git / blobdiff