X-Git-Url: https://git.libre-soc.org/?a=blobdiff_plain;f=Makefile.tpl;h=0a79790a3f22474394a346fcfcd72e4d935d3bab;hb=123494c8792fe97abef23162b386a43c82380a87;hp=b634b357e465f55795234fdbcfdf14a46270af82;hpb=77f7441a3203c6b596717998024c0f60c1268994;p=binutils-gdb.git

diff --git a/Makefile.tpl b/Makefile.tpl
index b634b357e46..0a79790a3f2 100644
--- a/Makefile.tpl
+++ b/Makefile.tpl
@@ -475,7 +475,6 @@ RECURSE_FLAGS = \
 
 # Flags to pass down to most sub-makes, in which we're building with
 # the host environment.
-# If any variables are added here, they must be added to do-*, below.
 EXTRA_HOST_FLAGS = \
 	'AR=$(AR)' \
 	'AS=$(AS)' \
@@ -504,7 +503,6 @@ X11_FLAGS_TO_PASS = \
 # Flags to pass down to makes which are built with the target environment.
 # The double $ decreases the length of the command line; the variables
 # are set in BASE_FLAGS_TO_PASS, and the sub-make will expand them.
-# If any variables are added here, they must be added to do-*, below.
 EXTRA_TARGET_FLAGS = \
 	'AR=$$(AR_FOR_TARGET)' \
 	'AS=$$(AS_FOR_TARGET)' \
@@ -526,7 +524,7 @@ TARGET_FLAGS_TO_PASS = $(BASE_FLAGS_TO_PASS) $(EXTRA_TARGET_FLAGS)
 # unfortunately needs the native compiler and the target ar and
 # ranlib.
 # If any variables are added here, they must be added to do-*, below.
-# The HOST_* variables are a special case, which are used for the gcc
+# The BUILD_* variables are a special case, which are used for the gcc
 # cross-building scheme.
 EXTRA_GCC_FLAGS = \
 	'AR=$(AR)' \
@@ -554,95 +552,135 @@ EXTRA_GCC_FLAGS = \
 
 GCC_FLAGS_TO_PASS = $(BASE_FLAGS_TO_PASS) $(EXTRA_GCC_FLAGS)
 
-configure-host: @configure_host_modules@
-configure-target: @configure_target_modules@
-
-# This is a list of the targets for which we can do a clean-{target}.
-CLEAN_MODULES =[+
-    FOR host_modules +][+
-        IF (not (or (exist? "no_clean") (exist? "with_x"))) +] \
-	clean-[+module+][+
-        ENDIF no_clean +][+
-    ENDFOR host_modules +]
-
-# All of the target modules that can be cleaned
-CLEAN_TARGET_MODULES =[+
-    FOR target_modules +][+
-        IF (not (exist? "no_clean")) +] \
-	clean-target-[+module+][+
-        ENDIF no_clean +][+
-    ENDFOR target_modules +]
-
-# All of the x11 modules that can be cleaned
-CLEAN_X11_MODULES = [+ FOR host_modules +][+ IF with_x +]\
-	clean-[+module+] [+ ENDIF with_x +][+ ENDFOR host_modules +]
+.PHONY: configure-host
+configure-host: maybe-configure-gcc [+
+  FOR host_modules +] \
+    maybe-configure-[+module+][+
+  ENDFOR host_modules +]
+.PHONY: configure-target
+configure-target: [+
+  FOR target_modules +] \
+    maybe-configure-target-[+module+][+
+  ENDFOR target_modules +]
 
 # The target built for a native build.
-# This list only includes modules actually being configured and built.
 .PHONY: all.normal
-all.normal: @all_build_modules@ \
-	@all_host_modules@ \
-	@all_target_modules@
-
-all-host: @all_host_modules@
-all-target: @all_target_modules@
+all.normal: @all_build_modules@ all-host all-target
+
+.PHONY: all-host
+all-host: maybe-all-gcc [+
+  FOR host_modules +] \
+    maybe-all-[+module+][+
+  ENDFOR host_modules +]
+.PHONY: all-target
+all-target: [+
+  FOR target_modules +] \
+    maybe-all-target-[+module+][+
+  ENDFOR target_modules +]
 
 # Do a target for all the subdirectories.  A ``make do-X'' will do a
 # ``make X'' in all subdirectories (because, in general, there is a
 # dependency (below) of X upon do-X, a ``make X'' will also do this,
 # but it may do additional work as well).
-# This target ensures that $(BASE_FLAGS_TO_PASS) appears only once,
-# because it is so large that it can easily overflow the command line
-# length limit on some systems.
 [+ FOR recursive_targets +]
-.PHONY: do-[+target+]
-do-[+target+]:
-	@r=`${PWD}`; export r; \
+.PHONY: do-[+make_target+]
+do-[+make_target+]: [+make_target+]-host [+make_target+]-target
+
+.PHONY: [+make_target+]-host
+[+make_target+]-host: maybe-[+make_target+]-gcc [+
+  FOR host_modules +] \
+    maybe-[+make_target+]-[+module+][+
+  ENDFOR host_modules +]
+
+.PHONY: [+make_target+]-target
+[+make_target+]-target: [+
+  FOR target_modules +] \
+    maybe-[+make_target+]-target-[+module+][+
+  ENDFOR target_modules +]
+
+# GCC, the eternal special case
+.PHONY: maybe-[+make_target+]-gcc [+make_target+]-gcc
+maybe-[+make_target+]-gcc:
+[+make_target+]-gcc: [+
+  FOR depend +]\
+    [+depend+]-gcc [+
+  ENDFOR depend +]
+	@[ -f ./gcc/Makefile ] || exit 0; \
+	r=`${PWD}`; export r; \
 	s=`cd $(srcdir); ${PWD}`; export s; \
 	$(SET_LIB_PATH) \
-	for i in $(SUBDIRS) -dummy-; do \
-	  if [ -f ./$$i/Makefile ]; then \
-	    case $$i in \
-	    gcc) \
-	      for flag in $(EXTRA_GCC_FLAGS); do \
-		eval `echo "$$flag" | sed -e "s|^\([^=]*\)=\(.*\)|\1='\2'; export \1|"`; \
-	      done; \
-	      ;; \
-	    *) \
-	      for flag in $(EXTRA_HOST_FLAGS); do \
-		eval `echo "$$flag" | sed -e "s|^\([^=]*\)=\(.*\)|\1='\2'; export \1|"`; \
-	      done; \
-	      ;; \
-	    esac ; \
-	    (cd ./$$i && \
-	        $(MAKE) $(BASE_FLAGS_TO_PASS) "AR=$${AR}" "AS=$${AS}" \
-			"CC=$${CC}" "CXX=$${CXX}" "LD=$${LD}" "NM=$${NM}" \
-	                "RANLIB=$${RANLIB}" \
-			"DLLTOOL=$${DLLTOOL}" "WINDRES=$${WINDRES}" \
-			[+target+]) \
-	    || exit 1; \
-	  else true; fi; \
-	done
-	# Break into two pieces
+	for flag in $(EXTRA_GCC_FLAGS); do \
+	  eval `echo "$$flag" | sed -e "s|^\([^=]*\)=\(.*\)|\1='\2'; export \1|"`; \
+	done; \
+	echo "Doing [+make_target+] in gcc" ; \
+	(cd gcc && \
+	  $(MAKE) $(BASE_FLAGS_TO_PASS) "AR=$${AR}" "AS=$${AS}" \
+	          "CC=$${CC}" "CXX=$${CXX}" "LD=$${LD}" "NM=$${NM}" \
+	          "RANLIB=$${RANLIB}" \
+	          "DLLTOOL=$${DLLTOOL}" "WINDRES=$${WINDRES}" \
+	          [+make_target+]) \
+	  || exit 1
+
+# Host modules.
+[+ FOR host_modules +]
+.PHONY: maybe-[+make_target+]-[+module+] [+make_target+]-[+module+]
+maybe-[+make_target+]-[+module+]:
+[+ IF (match-value? = "missing" (get "make_target") ) +]
+# [+module+] doesn't support [+make_target+].
+[+make_target+]-[+module+]:
+[+ ELSE +]
+[+make_target+]-[+module+]: [+
+  FOR depend +]\
+    [+depend+]-[+module+] [+
+  ENDFOR depend +]
+	@[ -f ./[+module+]/Makefile ] || exit 0; \
 	r=`${PWD}`; export r; \
 	s=`cd $(srcdir); ${PWD}`; export s; \
 	$(SET_LIB_PATH) \
-	for i in $(TARGET_CONFIGDIRS) -dummy-; do \
-	  if [ -f $(TARGET_SUBDIR)/$$i/Makefile ]; then \
-	    for flag in $(EXTRA_TARGET_FLAGS); do \
-		eval `echo "$$flag" | sed -e "s|^\([^=]*\)=\(.*\)|\1='\2'; export \1|"`; \
-	    done; \
-	    (cd $(TARGET_SUBDIR)/$$i && \
-	        $(MAKE) $(BASE_FLAGS_TO_PASS) "AR=$${AR}" "AS=$${AS}" \
-			"CC=$${CC}" "CXX=$${CXX}" "LD=$${LD}" "NM=$${NM}" \
-	                "RANLIB=$${RANLIB}" \
-			"DLLTOOL=$${DLLTOOL}" "WINDRES=$${WINDRES}" \
-			[+target+]) \
-	    || exit 1; \
-	  else true; fi; \
-	done
-[+ ENDFOR recursive_targets +]
+	for flag in $(EXTRA_HOST_FLAGS); do \
+	  eval `echo "$$flag" | sed -e "s|^\([^=]*\)=\(.*\)|\1='\2'; export \1|"`; \
+	done; \
+	echo "Doing [+make_target+] in [+module+]" ; \
+	(cd [+module+] && \
+	  $(MAKE) $(BASE_FLAGS_TO_PASS) "AR=$${AR}" "AS=$${AS}" \
+	          "CC=$${CC}" "CXX=$${CXX}" "LD=$${LD}" "NM=$${NM}" \
+	          "RANLIB=$${RANLIB}" \
+	          "DLLTOOL=$${DLLTOOL}" "WINDRES=$${WINDRES}" \
+	          [+make_target+]) \
+	  || exit 1
+[+ ENDIF +]
+[+ ENDFOR host_modules +]
 
+# Target modules.
+[+ FOR target_modules +]
+.PHONY: maybe-[+make_target+]-target-[+module+] [+make_target+]-target-[+module+]
+maybe-[+make_target+]-target-[+module+]:
+[+ IF (match-value? = "missing" (get "make_target") ) +]
+# [+module+] doesn't support [+make_target+].
+[+make_target+]-target-[+module+]:
+[+ ELSE +]
+[+make_target+]-target-[+module+]: [+
+  FOR depend +]\
+    [+depend+]-target-[+module+] [+
+  ENDFOR depend +]
+	@[ -f $(TARGET_SUBDIR)/[+module+]/Makefile ] || exit 0 ; \
+	r=`${PWD}`; export r; \
+	s=`cd $(srcdir); ${PWD}`; export s; \
+	$(SET_LIB_PATH) \
+	echo "Doing [+make_target+] in $(TARGET_SUBDIR)/[+module+]" ; \
+	for flag in $(EXTRA_TARGET_FLAGS); do \
+	  eval `echo "$$flag" | sed -e "s|^\([^=]*\)=\(.*\)|\1='\2'; export \1|"`; \
+	done; \
+	(cd $(TARGET_SUBDIR)/[+module+] && \
+	  $(MAKE) $(BASE_FLAGS_TO_PASS) "AR=$${AR}" "AS=$${AS}" \
+	          "CC=$${CC}" "CXX=$${CXX}" "LD=$${LD}" "NM=$${NM}" \
+	          "RANLIB=$${RANLIB}" \
+	          "DLLTOOL=$${DLLTOOL}" "WINDRES=$${WINDRES}" \
+	          [+make_target+]) \
+	  || exit 1
+[+ ENDIF +]
+[+ ENDFOR target_modules +]
+[+ ENDFOR recursive_targets +]
 
 # Here are the targets which correspond to the do-X targets.
 
@@ -690,33 +728,8 @@ maintainer-clean: local-maintainer-clean do-maintainer-clean local-clean
 maintainer-clean: local-distclean
 realclean: maintainer-clean
 
-# This rule is used to clean specific modules.
-.PHONY: $(CLEAN_MODULES) $(CLEAN_X11_MODULES) clean-gcc
-$(CLEAN_MODULES) $(CLEAN_X11_MODULES) clean-gcc:
-	@dir=`echo $@ | sed -e 's/clean-//'`; \
-	if [ -f ./$${dir}/Makefile ] ; then \
-	  r=`${PWD}`; export r; \
-	  s=`cd $(srcdir); ${PWD}`; export s; \
-	  $(SET_LIB_PATH) \
-	  (cd $${dir} && $(MAKE) $(FLAGS_TO_PASS) clean); \
-	else \
-	  true; \
-	fi
-
-.PHONY: $(CLEAN_TARGET_MODULES)
-$(CLEAN_TARGET_MODULES):
-	@dir=`echo $@ | sed -e 's/clean-target-//'`; \
-	rm -f $(TARGET_SUBDIR)/$${dir}/multilib.out $(TARGET_SUBDIR)/$${dir}/tmpmulti.out; \
-	if [ -f $(TARGET_SUBDIR)/$${dir}/Makefile ] ; then \
-	  r=`${PWD}`; export r; \
-	  s=`cd $(srcdir); ${PWD}`; export s; \
-	  $(SET_LIB_PATH) \
-	  (cd $(TARGET_SUBDIR)/$${dir} && $(MAKE) $(TARGET_FLAGS_TO_PASS) clean); \
-	else \
-	  true; \
-	fi
-
-clean-target: $(CLEAN_TARGET_MODULES) clean-target-libgcc
+# Extra dependency for clean-target, owing to the mixed nature of gcc
+clean-target: clean-target-libgcc
 clean-target-libgcc:
 	test ! -d gcc/libgcc || \
 	(cd gcc/libgcc && find . -type d -print) | \
@@ -730,8 +743,13 @@ check:
 	$(MAKE) do-check NOTPARALLEL=parallel-ok
 
 # Only include modules actually being configured and built.
-do-check: @check_host_modules@ \
-	@check_target_modules@
+do-check: maybe-check-gcc [+
+  FOR host_modules +] \
+    maybe-check-[+module+][+
+  ENDFOR host_modules +][+
+  FOR target_modules +] \
+    maybe-check-target-[+module+][+
+  ENDFOR target_modules +]
 
 # Automated reporting of test results.
 
@@ -757,9 +775,25 @@ mail-report-with-warnings.log: warning.log
 # Installation targets.
 
 .PHONY: install uninstall
-install: installdirs @install_host_modules@ @install_target_modules@
-
-install-target: @install_target_modules@
+install: installdirs install-host install-target
+
+.PHONY: install-host-nogcc
+install-host-nogcc: [+
+  FOR host_modules +] \
+    maybe-install-[+module+][+
+  ENDFOR host_modules +]
+
+.PHONY: install-host
+install-host: maybe-install-gcc [+
+  FOR host_modules +] \
+    maybe-install-[+module+][+
+  ENDFOR host_modules +]
+
+.PHONY: install-target
+install-target: [+
+  FOR target_modules +] \
+    maybe-install-target-[+module+][+
+  ENDFOR target_modules +]
 
 uninstall:
 	@echo "the uninstall target is not supported in this tree"
@@ -778,8 +812,8 @@ install.all: install-no-fixedincludes
 # install-no-fixedincludes is used because Cygnus can not distribute
 # the fixed header files.
 .PHONY: install-no-fixedincludes
-install-no-fixedincludes: installdirs @install_host_modules_nogcc@ \
-	@install_target_modules@ gcc-no-fixedincludes
+install-no-fixedincludes: installdirs install-host-nogcc \
+	install-target gcc-no-fixedincludes
 
 ### other supporting targets
 
@@ -900,18 +934,16 @@ configure-[+module+]:
 	CFLAGS="$(CFLAGS)"; export CFLAGS; \
 	CXX="$(CXX)"; export CXX; \
 	CXXFLAGS="$(CXXFLAGS)"; export CXXFLAGS; \
-	if [ z$(build_canonical) !=  z$(host_canoncial) ] ; then \
-	  AR="$(AR)"; export AR; \
-	  AS="$(AS)"; export AS; \
-	  CC_FOR_BUILD="$(CC_FOR_BUILD)"; export CC_FOR_BUILD; \
-	  DLLTOOL="$(DLLTOOL)"; export DLLTOOL; \
-	  LD="$(LD)"; export LD; \
-	  NM="$(NM)"; export NM; \
-	  RANLIB="$(RANLIB)"; export RANLIB; \
-	  WINDRES="$(WINDRES)"; export WINDRES; \
-	  OBJCOPY="$(OBJCOPY)"; export OBJCOPY; \
-	  OBJDUMP="$(OBJDUMP)"; export OBJDUMP; \
-	fi; \
+	AR="$(AR)"; export AR; \
+	AS="$(AS)"; export AS; \
+	CC_FOR_BUILD="$(CC_FOR_BUILD)"; export CC_FOR_BUILD; \
+	DLLTOOL="$(DLLTOOL)"; export DLLTOOL; \
+	LD="$(LD)"; export LD; \
+	NM="$(NM)"; export NM; \
+	RANLIB="$(RANLIB)"; export RANLIB; \
+	WINDRES="$(WINDRES)"; export WINDRES; \
+	OBJCOPY="$(OBJCOPY)"; export OBJCOPY; \
+	OBJDUMP="$(OBJDUMP)"; export OBJDUMP; \
 	echo Configuring in [+module+]; \
 	cd [+module+] || exit 1; \
 	case $(srcdir) in \
@@ -940,11 +972,11 @@ all-[+module+]: configure-[+module+]
 	    +] $(X11_FLAGS_TO_PASS)[+ 
 	  ENDIF with_x +] all)
 
+.PHONY: check-[+module+] maybe-check-[+module+]
+maybe-check-[+module+]:
 [+ IF no_check +]
-.PHONY: check-[+module+]
 check-[+module+]:
 [+ ELIF no_check_cross +]
-.PHONY: check-[+module+]
 # This module is only tested in a native toolchain.
 check-[+module+]:
 	@if [ '$(host_canonical)' = '$(target_canonical)' ] ; then \
@@ -957,7 +989,6 @@ check-[+module+]:
 	    ENDIF with_x +] check); \
 	fi
 [+ ELSE check +]
-.PHONY: check-[+module+]
 check-[+module+]:
 	@r=`${PWD}`; export r; \
 	s=`cd $(srcdir); ${PWD}`; export s; \
@@ -968,13 +999,11 @@ check-[+module+]:
 	  ENDIF with_x +] check)
 [+ ENDIF no_check +]
 
-[+ IF no_install +]
 .PHONY: install-[+module+] maybe-install-[+module+]
 maybe-install-[+module+]:
+[+ IF no_install +]
 install-[+module+]:
 [+ ELSE install +]
-.PHONY: install-[+module+] maybe-install-[+module+]
-maybe-install-[+module+]:
 install-[+module+]: installdirs
 	@r=`${PWD}`; export r; \
 	s=`cd $(srcdir); ${PWD}`; export s; \
@@ -1079,12 +1108,13 @@ all-target-[+module+]: configure-target-[+module+]
 	  +] 'CXX=$$(RAW_CXX_FOR_TARGET)' 'CXX_FOR_TARGET=$$(RAW_CXX_FOR_TARGET)' [+ 
 	    ENDIF raw_cxx 
 	  +] all)
+
+.PHONY: check-target-[+module+] maybe-check-target-[+module+]
+maybe-check-target-[+module+]:
 [+ IF no_check +]
 # Dummy target for uncheckable module.
-.PHONY: check-target-[+module+]
 check-target-[+module+]:
 [+ ELSE check +]
-.PHONY: check-target-[+module+]
 check-target-[+module+]:
 	@r=`${PWD}`; export r; \
 	s=`cd $(srcdir); ${PWD}`; export s; \
@@ -1096,14 +1126,13 @@ check-target-[+module+]:
 	    ENDIF raw_cxx 
 	  +] check)
 [+ ENDIF no_check +]
-[+ IF no_install +]
+
 .PHONY: install-target-[+module+] maybe-install-target-[+module+]
 maybe-install-target-[+module+]:
+[+ IF no_install +]
 # Dummy target for uninstallable.
 install-target-[+module+]:
 [+ ELSE install +]
-.PHONY: install-target-[+module+] maybe-install-target-[+module+]
-maybe-install-target-[+module+]:
 install-target-[+module+]: installdirs
 	@r=`${PWD}`; export r; \
 	s=`cd $(srcdir); ${PWD}`; export s; \
@@ -1134,18 +1163,16 @@ configure-gcc:
 	CXX="$(CXX)"; export CXX; \
 	CXXFLAGS="$(CXXFLAGS)"; export CXXFLAGS; \
 	TOPLEVEL_CONFIGURE_ARGUMENTS="$(TOPLEVEL_CONFIGURE_ARGUMENTS)"; export TOPLEVEL_CONFIGURE_ARGUMENTS; \
-	if [ z$(build_canonical) !=  z$(host_canoncial) ] ; then \
-	  AR="$(AR)"; export AR; \
-	  AS="$(AS)"; export AS; \
-	  CC_FOR_BUILD="$(CC_FOR_BUILD)"; export CC_FOR_BUILD; \
-	  DLLTOOL="$(DLLTOOL)"; export DLLTOOL; \
-	  LD="$(LD)"; export LD; \
-	  NM="$(NM)"; export NM; \
-	  RANLIB="$(RANLIB)"; export RANLIB; \
-	  WINDRES="$(WINDRES)"; export WINDRES; \
-	  OBJCOPY="$(OBJCOPY)"; export OBJCOPY; \
-	  OBJDUMP="$(OBJDUMP)"; export OBJDUMP; \
-	fi; \
+	AR="$(AR)"; export AR; \
+	AS="$(AS)"; export AS; \
+	CC_FOR_BUILD="$(CC_FOR_BUILD)"; export CC_FOR_BUILD; \
+	DLLTOOL="$(DLLTOOL)"; export DLLTOOL; \
+	LD="$(LD)"; export LD; \
+	NM="$(NM)"; export NM; \
+	RANLIB="$(RANLIB)"; export RANLIB; \
+	WINDRES="$(WINDRES)"; export WINDRES; \
+	OBJCOPY="$(OBJCOPY)"; export OBJCOPY; \
+	OBJDUMP="$(OBJDUMP)"; export OBJDUMP; \
 	echo Configuring in gcc; \
 	cd gcc || exit 1; \
 	case $(srcdir) in \
@@ -1224,6 +1251,23 @@ $(GCC_STRAP_TARGETS): all-bootstrap configure-gcc
 	echo "Building runtime libraries"; \
 	$(MAKE) $(BASE_FLAGS_TO_PASS) $(RECURSE_FLAGS) all
 
+profiledbootstrap: all-bootstrap configure-gcc
+	@r=`${PWD}`; export r; \
+	s=`cd $(srcdir); ${PWD}`; export s; \
+	$(SET_LIB_PATH) \
+	echo "Bootstrapping the compiler"; \
+	cd gcc && $(MAKE) $(GCC_FLAGS_TO_PASS) stageprofile_build
+	@r=`${PWD}`; export r; \
+	s=`cd $(srcdir); ${PWD}` ; export s; \
+	$(SET_LIB_PATH) \
+	echo "Building runtime libraries and training compiler"; \
+	$(MAKE) $(BASE_FLAGS_TO_PASS) $(RECURSE_FLAGS) all
+	@r=`${PWD}`; export r; \
+	s=`cd $(srcdir); ${PWD}`; export s; \
+	$(SET_LIB_PATH) \
+	echo "Building feedback based compiler"; \
+	cd gcc && $(MAKE) $(GCC_FLAGS_TO_PASS) stagefeedback_build
+
 .PHONY: cross
 cross: all-texinfo all-bison all-byacc all-binutils all-gas all-ld
 	@r=`${PWD}`; export r; \
@@ -1238,7 +1282,8 @@ cross: all-texinfo all-bison all-byacc all-binutils all-gas all-ld
 	$(MAKE) $(BASE_FLAGS_TO_PASS) $(RECURSE_FLAGS) \
 	  LANGUAGES="c c++" all
 
-.PHONY: check-gcc
+.PHONY: check-gcc maybe-check-gcc
+maybe-check-gcc:
 check-gcc:
 	@if [ -f ./gcc/Makefile ] ; then \
 	  r=`${PWD}`; export r; \
@@ -1334,6 +1379,8 @@ all-binutils: maybe-all-libiberty maybe-all-opcodes maybe-all-bfd maybe-all-flex
 # binutils might be on PATH, and they might need the shared opcodes
 # library.
 install-binutils: maybe-install-opcodes
+# libopcodes depends on libbfd
+install-opcodes: maybe-install-bfd
 all-gas: maybe-all-libiberty maybe-all-opcodes maybe-all-bfd maybe-all-intl
 all-gprof: maybe-all-libiberty maybe-all-bfd maybe-all-opcodes maybe-all-intl
 all-ld: maybe-all-libiberty maybe-all-bfd maybe-all-opcodes maybe-all-bison maybe-all-byacc maybe-all-flex maybe-all-intl
@@ -1400,7 +1447,7 @@ configure-target-zlib: $(ALL_GCC_C)
 configure-target-examples: $(ALL_GCC_C)
 configure-target-libgloss: $(ALL_GCC)
 all-target-libgloss: maybe-configure-target-newlib
-configure-target-libiberty: $(ALL_GCC_C)
+configure-target-libiberty: $(ALL_GCC)
 configure-target-libtermcap: $(ALL_GCC_C)
 configure-target-newlib: $(ALL_GCC)
 configure-target-rda: $(ALL_GCC_C)