X-Git-Url: https://git.libre-soc.org/?a=blobdiff_plain;f=configure.ac;h=797a624621e459f090028260fd22e664acfc7136;hb=e7954ef5e5ed90fb7d28c013518f4c2e6bcd20a1;hp=4bd869a63a9bc1557eb3960333e8581cccd239db;hpb=01027315f54048dbaf03ac37455c2528c72a6d9b;p=binutils-gdb.git

diff --git a/configure.ac b/configure.ac
index 4bd869a63a9..797a624621e 100644
--- a/configure.ac
+++ b/configure.ac
@@ -1,6 +1,6 @@
 #   Copyright (C) 1992, 1993, 1994, 1995, 1996, 1997, 1998, 1999, 2000,
 #   2001, 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012,
-#   2014, 2015, 2016, 2019 Free Software Foundation, Inc.
+#   2014, 2015, 2016, 2019, 2020 Free Software Foundation, Inc.
 #
 # This file is free software; you can redistribute it and/or modify it
 # under the terms of the GNU General Public License as published by
@@ -23,7 +23,7 @@ m4_include(config/acx.m4)
 m4_include(config/override.m4)
 m4_include(config/proginstall.m4)
 m4_include(config/elf.m4)
-m4_include(config/debuginfod.m4)
+m4_include(config/gcc-plugin.m4)
 m4_include([libtool.m4])
 m4_include([ltoptions.m4])
 m4_include([ltsugar.m4])
@@ -140,7 +140,7 @@ host_libs="intl libiberty opcodes bfd readline tcl tk itcl libgui zlib libbacktr
 # binutils, gas and ld appear in that order because it makes sense to run
 # "make check" in that particular order.
 # If --enable-gold is used, "gold" may replace "ld".
-host_tools="texinfo flex bison binutils gas ld fixincludes gcc cgen sid sim gdb gprof etc expect dejagnu m4 utils guile fastjar gnattools libcc1 gotools"
+host_tools="texinfo flex bison binutils gas ld fixincludes gcc cgen sid sim gdb gdbserver gprof etc expect dejagnu m4 utils guile fastjar gnattools libcc1 gotools"
 
 # these libraries are built for the target environment, and are built after
 # the host libraries and the host tools (which may be a cross compiler)
@@ -728,9 +728,6 @@ case "${target}" in
   arm-wince-pe)
     noconfigdirs="$noconfigdirs target-libffi"
     ;;
-  arm*-*-symbianelf*)
-    noconfigdirs="$noconfigdirs target-libffi"
-    ;;
   cris-*-* | crisv32-*-*)
     case "${target}" in
       *-*-linux*)
@@ -782,6 +779,22 @@ case "${target}" in
     ;;
 esac
 
+# Only allow gdbserver on some systems.
+if test -d ${srcdir}/gdbserver; then
+    if test x$enable_gdbserver = x; then
+	AC_MSG_CHECKING([for gdbserver support])
+	if (srcdir=${srcdir}/gdbserver; \
+		. ${srcdir}/configure.srv; \
+		test -n "$UNSUPPORTED")
+	then
+	    AC_MSG_RESULT([no])
+	    noconfigdirs="$noconfigdirs gdbserver"
+	else
+	    AC_MSG_RESULT([yes])
+	fi
+    fi
+fi
+
 # Disable libgo for some systems where it is known to not work.
 # For testing, you can easily override this with --enable-libgo.
 if test x$enable_libgo = x; then
@@ -1101,6 +1114,9 @@ case "${target}" in
     noconfigdirs="$noconfigdirs ld gas gdb gprof sim"
     noconfigdirs="$noconfigdirs $target_libraries"
     ;;
+  pdp11-*-*)
+    noconfigdirs="$noconfigdirs gdb gprof"
+    ;;
   powerpc-*-aix*)
     # copied from rs6000-*-* entry
     noconfigdirs="$noconfigdirs gprof"
@@ -1262,7 +1278,7 @@ else
   WINDMC_FOR_BUILD="\$(WINDMC)"
 fi
 
-AC_PROG_CC
+AC_PROG_CC_C99
 AC_PROG_CXX
 
 # We must set the default linker to the linker used by gcc for the correct
@@ -1356,6 +1372,65 @@ if test "$enable_bootstrap:$GXX" = "yes:yes"; then
   CXX="$CXX -std=gnu++98"
 fi
 
+AC_ARG_ENABLE([pgo-build],
+[AS_HELP_STRING([--enable-pgo-build[[=lto]]],
+		[enable the PGO build])],
+[enable_pgo_build=$enableval],
+[enable_pgo_build=no])
+
+# Issue errors and warnings for invalid/strange PGO build combinations.
+case "$have_compiler:$host:$target:$enable_pgo_build" in
+  *:*:*:no) ;;
+
+  # Allow the PGO build only if we aren't building a compiler and
+  # we are in a native configuration.
+  no:$build:$build:yes | no:$build:$build:lto) ;;
+
+  # Disallow the PGO bootstrap if we are building a compiler.
+  yes:*:*:yes | yes:*:*:lto)
+    AC_MSG_ERROR([cannot perform the PGO bootstrap when building a compiler]) ;;
+
+  *)
+    AC_MSG_ERROR([invalid option for --enable-pgo-build])
+    ;;
+esac
+
+if test "$enable_pgo_build" != "no"; then
+  AC_MSG_CHECKING([whether the compiler supports -fprofile-generate])
+  old_CFLAGS="$CFLAGS"
+  PGO_BUILD_GEN_CFLAGS="-fprofile-generate"
+  CFLAGS="$CFLAGS $PGO_BUILD_CFLAGS"
+  AC_COMPILE_IFELSE([AC_LANG_SOURCE([int foo;])],,
+		    [PGO_BUILD_GEN_CFLAGS=])
+  CFLAGS="$old_CFLAGS"
+  if test -n "$PGO_BUILD_GEN_CFLAGS"; then
+    AC_MSG_RESULT([yes])
+    PGO_BUILD_USE_CFLAGS="-fprofile-use"
+  else
+    AC_MSG_RESULT([no])
+    AC_MSG_ERROR([cannot perform the PGO build without -fprofile-generate])
+  fi
+
+  if test "$enable_pgo_build" = "lto"; then
+    AC_MSG_CHECKING([whether the compiler supports -flto=jobserver -ffat-lto-objects])
+    old_CFLAGS="$CFLAGS"
+    PGO_BUILD_LTO_CFLAGS="-flto=jobserver -ffat-lto-objects"
+    CFLAGS="$CFLAGS $PGO_BUILD_LTO_CFLAGS"
+    AC_COMPILE_IFELSE([AC_LANG_SOURCE([int foo;])],,
+		      [PGO_BUILD_LTO_CFLAGS=])
+    CFLAGS="$old_CFLAGS"
+    if test -n "$PGO_BUILD_LTO_CFLAGS"; then
+      AC_MSG_RESULT([yes])
+    else
+      AC_MSG_RESULT([no])
+      AC_MSG_WARN([LTO is disabled for the PGO build])
+    fi
+  fi
+fi
+AC_SUBST(PGO_BUILD_GEN_CFLAGS)
+AC_SUBST(PGO_BUILD_USE_CFLAGS)
+AC_SUBST(PGO_BUILD_LTO_CFLAGS)
+
 # Used for setting $lt_cv_objdir
 _LT_CHECK_OBJDIR
 
@@ -1364,9 +1439,6 @@ gmplibs="-lmpc -lmpfr -lgmp"
 gmpinc=
 have_gmp=no
 
-# Check for debuginfod
-AC_DEBUGINFOD
-
 # Specify a location for mpc
 # check for this first so it ends up on the link line before mpfr.
 AC_ARG_WITH(mpc,
@@ -2730,13 +2802,20 @@ esac
 CONFIGURE_GDB_TK=`echo ${GDB_TK} | sed s/-all-/-configure-/g`
 INSTALL_GDB_TK=`echo ${GDB_TK} | sed s/-all-/-install-/g`
 
-# gdb depends on gnulib and gdbsupport, but as nothing else does, only
-# include them if gdb is built.
-if echo " ${configdirs} " | grep " gdb " > /dev/null 2>&1 ; then
-  # The Makefile provides the ordering, so it's enough here to add to
-  # the list.
-  configdirs="${configdirs} gnulib gdbsupport"
-fi
+# gdb and gdbserver depend on gnulib and gdbsupport, but as nothing
+# else does, only include them if one of these is built.  The Makefile
+# provides the ordering, so it's enough here to add to the list.
+case " ${configdirs} " in
+  *\ gdb\ *)
+    configdirs="${configdirs} gnulib gdbsupport"
+    ;;
+  *\ gdbserver\ *)
+    configdirs="${configdirs} gnulib gdbsupport"
+    ;;
+  *\ sim\ *)
+    configdirs="${configdirs} gnulib"
+    ;;
+esac
 
 # Strip out unwanted targets.
 
@@ -2827,6 +2906,12 @@ extrasub_target="$extrasub_target
 /^@unless /d
 /^@endunless /d"
 
+if test "$enable_pgo_build" != "no"; then
+  extrasub_build="$extrasub_build
+/^@if pgo-build\$/d
+/^@endif pgo-build\$/d"
+fi
+
 # Create the serialization dependencies.  This uses a temporary file.
 
 AC_ARG_ENABLE([serial-configure],
@@ -3357,6 +3442,24 @@ AC_SUBST(CXX)
 AC_SUBST(CFLAGS)
 AC_SUBST(CXXFLAGS)
 
+GCC_PLUGIN_OPTION(PLUGIN_OPTION)
+AR_PLUGIN_OPTION=
+RANLIB_PLUGIN_OPTION=
+if test -n "$PLUGIN_OPTION"; then
+  if $AR --help 2>&1 | grep -q "\--plugin"; then
+    AR_PLUGIN_OPTION="$PLUGIN_OPTION"
+  fi
+  if $RANLIB --help 2>&1 | grep -q "\--plugin"; then
+    RANLIB_PLUGIN_OPTION="$PLUGIN_OPTION"
+  fi
+else
+  if test "$enable_pgo_build" != "no"; then
+    AC_MSG_ERROR([AR with --plugin and rc is required for LTO build])
+  fi
+fi
+AC_SUBST(AR_PLUGIN_OPTION)
+AC_SUBST(RANLIB_PLUGIN_OPTION)
+
 # Target tools.
 AC_ARG_WITH([build-time-tools], 
   [AS_HELP_STRING([--with-build-time-tools=PATH],