X-Git-Url: https://git.libre-soc.org/?a=blobdiff_plain;f=configure.ac;h=854f71a34e5e01c5e0e9894aa3b2e108ea61f2f8;hb=aa2f9bcf23a00fc7e9d7350757b8938c36106c42;hp=28155a0e593841be057cba149faece8996fab2a5;hpb=db67d458959d211835f78d8f2aebb5ae84eb42e7;p=binutils-gdb.git

diff --git a/configure.ac b/configure.ac
index 28155a0e593..854f71a34e5 100644
--- a/configure.ac
+++ b/configure.ac
@@ -1,6 +1,6 @@
 #   Copyright (C) 1992, 1993, 1994, 1995, 1996, 1997, 1998, 1999, 2000,
 #   2001, 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012,
-#   2014, 2015, 2016 Free Software Foundation, Inc.
+#   2014, 2015, 2016, 2019 Free Software Foundation, Inc.
 #
 # This file is free software; you can redistribute it and/or modify it
 # under the terms of the GNU General Public License as published by
@@ -31,7 +31,6 @@ m4_include([lt~obsolete.m4])
 m4_include([config/isl.m4])
 
 AC_INIT(move-if-change)
-AC_PREREQ(2.64)
 AC_DISABLE_OPTION_CHECKING
 
 progname=$0
@@ -132,7 +131,7 @@ build_tools="build-texinfo build-flex build-bison build-m4 build-fixincludes"
 
 # these libraries are used by various programs built for the host environment
 #f
-host_libs="intl libiberty opcodes bfd readline tcl tk itcl libgui zlib libbacktrace libcpp libdecnumber gmp mpfr mpc isl libelf libiconv"
+host_libs="intl libiberty opcodes bfd readline tcl tk itcl libgui zlib libbacktrace libcpp libdecnumber gmp mpfr mpc isl libelf libiconv libctf"
 
 # these tools are built for the host environment
 # Note, the powerpc-eabi build depends on sim occurring before gdb in order to
@@ -246,6 +245,12 @@ if test x$with_system_zlib = xyes ; then
   noconfigdirs="$noconfigdirs zlib"
 fi
 
+# Don't compile the bundled readline/libreadline.a if --with-system-readline
+# is provided.
+if test x$with_system_readline = xyes ; then
+  noconfigdirs="$noconfigdirs readline"
+fi
+
 # some tools are so dependent upon X11 that if we're not building with X, 
 # it's not even worth trying to configure, much less build, that tool.
 
@@ -1286,11 +1291,11 @@ if test "$GCC" = yes; then
   LDFLAGS="$LDFLAGS -static-libstdc++ -static-libgcc"
   AC_MSG_CHECKING([whether g++ accepts -static-libstdc++ -static-libgcc])
   AC_LANG_PUSH(C++)
-  AC_LINK_IFELSE([
+  AC_LINK_IFELSE([AC_LANG_SOURCE([
 #if (__GNUC__ < 4) || (__GNUC__ == 4 && __GNUC_MINOR__ < 5)
 #error -static-libstdc++ not implemented
 #endif
-int main() {}],
+int main() {}])],
     [AC_MSG_RESULT([yes]); have_static_libs=yes],
     [AC_MSG_RESULT([no])])
   AC_LANG_POP(C++)
@@ -2707,6 +2712,14 @@ esac
 CONFIGURE_GDB_TK=`echo ${GDB_TK} | sed s/-all-/-configure-/g`
 INSTALL_GDB_TK=`echo ${GDB_TK} | sed s/-all-/-install-/g`
 
+# gdb depends on gnulib, but as nothing else does, only include it if
+# gdb is built.
+if echo " ${configdirs} " | grep " gdb " > /dev/null 2>&1 ; then
+  # The Makefile provides the ordering, so it's enough here to add
+  # gnulib to the list.
+  configdirs="${configdirs} gnulib"
+fi
+
 # Strip out unwanted targets.
 
 # While at that, we remove Makefiles if we were started for recursive
@@ -2719,7 +2732,9 @@ INSTALL_GDB_TK=`echo ${GDB_TK} | sed s/-all-/-install-/g`
 # extrasub-{build,host,target} not because there is any reason to split
 # the substitutions up that way, but only to remain below the limit of
 # 99 commands in a script, for HP-UX sed.
-# Do not nest @if/@endif pairs, because configure will not warn you at all.
+
+# Do not nest @if/@endif or @unless/@endunless pairs, because
+# configure will not warn you at all.
 
 case "$enable_bootstrap:$ENABLE_GOLD: $configdirs :,$stage1_languages," in
   yes:yes:*\ gold\ *:*,c++,*) ;;
@@ -2738,8 +2753,10 @@ for module in ${build_configdirs} ; do
   extrasub_build="$extrasub_build
 /^@if build-$module\$/d
 /^@endif build-$module\$/d
+/^@unless build-$module\$/,/^@endunless build-$module\$/d
 /^@if build-$module-$bootstrap_suffix\$/d
-/^@endif build-$module-$bootstrap_suffix\$/d"
+/^@endif build-$module-$bootstrap_suffix\$/d
+/^@unless build-$module-$bootstrap_suffix\$/,/^@endunless build-$module-$bootstrap_suffix\$/d"
 done
 extrasub_host=
 for module in ${configdirs} ; do
@@ -2758,8 +2775,10 @@ for module in ${configdirs} ; do
   extrasub_host="$extrasub_host
 /^@if $module\$/d
 /^@endif $module\$/d
+/^@unless $module\$/,/^@endunless $module\$/d
 /^@if $module-$host_bootstrap_suffix\$/d
-/^@endif $module-$host_bootstrap_suffix\$/d"
+/^@endif $module-$host_bootstrap_suffix\$/d
+/^@unless $module-$host_bootstrap_suffix\$/,/^@endunless $module-$host_bootstrap_suffix\$/d"
 done
 extrasub_target=
 for module in ${target_configdirs} ; do
@@ -2778,13 +2797,17 @@ for module in ${target_configdirs} ; do
   extrasub_target="$extrasub_target
 /^@if target-$module\$/d
 /^@endif target-$module\$/d
+/^@unless target-$module\$/,/^@endunless target-$module\$/d
 /^@if target-$module-$target_bootstrap_suffix\$/d
-/^@endif target-$module-$target_bootstrap_suffix\$/d"
+/^@endif target-$module-$target_bootstrap_suffix\$/d
+/^@unless target-$module-$target_bootstrap_suffix\$/,/^@endunless target-$module-$target_bootstrap_suffix\$/d"
 done
 
 # Do the final fixup along with target modules.
 extrasub_target="$extrasub_target
-/^@if /,/^@endif /d"
+/^@if /,/^@endif /d
+/^@unless /d
+/^@endunless /d"
 
 # Create the serialization dependencies.  This uses a temporary file.