X-Git-Url: https://git.libre-soc.org/?a=blobdiff_plain;f=configure.in;h=c4d660dbb6f9aebdfae44161b086044b83120848;hb=6f32162af66395b5ae357d714d8d18fb6f666feb;hp=d9f2bb15c4a9924be18c7e67074c02a30b76bb78;hpb=3fa03ff9de734e397325865bcd1076b4f087f24a;p=gcc.git

diff --git a/configure.in b/configure.in
index d9f2bb15c4a..c4d660dbb6f 100644
--- a/configure.in
+++ b/configure.in
@@ -50,7 +50,7 @@ fi
 
 libstdcxx_version="target-libstdc++-v3"
 # Don't use libstdc++-v3's flags to configure/build itself.
-libstdcxx_flags='`case $$dir in libstdc++-v3) ;; *) cat $$r/$(TARGET_SUBDIR)/libstdc++-v3/src/libstdc++.INC 2>/dev/null || : ;; esac` -L$$r/$(TARGET_SUBDIR)/libstdc++-v3/src -L$$r/$(TARGET_SUBDIR)/libstdc++-v3/src/.libs'
+libstdcxx_flags='`case $$dir in libstdc++-v3) ;; *) test ! -f $$r/$(TARGET_SUBDIR)/libstdc++-v3/testsuite_flags || $(SHELL) $$r/$(TARGET_SUBDIR)/libstdc++-v3/testsuite_flags --build-includes;; esac` -L$$r/$(TARGET_SUBDIR)/libstdc++-v3/src -L$$r/$(TARGET_SUBDIR)/libstdc++-v3/src/.libs'
 
 # these tools are built for the host environment
 # Note, the powerpc-eabi build depends on sim occurring before gdb in order to
@@ -585,6 +585,22 @@ case "${host}" in
     ;;
 esac
 
+# Save it here so that, even in case of --enable-libgcj, if the Java
+# front-end isn't enabled, we still get libgcj disabled.
+libgcj_saved=$libgcj
+case $enable_libgcj in
+yes)
+  # If we reset it here, it won't get added to noconfigdirs in the
+  # target-specific build rules, so it will be forcibly enabled
+  # (unless the Java language itself isn't enabled).
+  libgcj=
+  ;;
+no)
+  # Make sure we get it printed in the list of not supported target libs.
+  noconfigdirs="$noconfigdirs ${libgcj}"
+  ;;
+esac
+
 case "${target}" in
   *-*-chorusos)
     noconfigdirs="$noconfigdirs target-newlib target-libgloss ${libgcj}"
@@ -617,6 +633,11 @@ case "${target}" in
     # newlib is not 64 bit ready
     noconfigdirs="$noconfigdirs target-newlib target-libgloss ${libgcj}"
     ;;
+  sh-*-linux*)
+    noconfigdirs="$noconfigdirs ${libgcj} target-newlib target-libgloss"
+    # linux has rx in libc
+    skipdirs="$skipdirs target-librx"
+    ;;    
   sh*-*-pe|mips*-*-pe|*arm-wince-pe)
     noconfigdirs="$noconfigdirs ${libgcj}"
     noconfigdirs="$noconfigdirs target-examples"
@@ -698,14 +719,17 @@ case "${target}" in
   arm-*-riscix*)
     noconfigdirs="$noconfigdirs ld target-libgloss ${libgcj}"
     ;;
+  cris-*-*)
+    noconfigdirs="$noconfigdirs ${libgcj}"
+    ;;
   d10v-*-*)
     noconfigdirs="$noconfigdirs target-librx ${libstdcxx_version} target-libgloss ${libgcj}"
     ;;
   d30v-*-*)
-    noconfigdirs="${libgcj}"
+    noconfigdirs="$noconfigdirs ${libgcj}"
     ;;
   fr30-*-elf*)
-    noconfigdirs="${libgcj}"
+    noconfigdirs="$noconfigdirs ${libgcj}"
     if [ x${is_cross_compiler} != xno ] ; then
 	   target_configdirs="${target_configdirs} target-bsp target-libstub target-cygmon"
     fi
@@ -724,7 +748,7 @@ case "${target}" in
   parisc*-*-linux* | hppa*-*-linux* | \
   hppa*-*-lites* | \
   hppa*64*-*-*)
-    noconfigdirs="${libgcj}"
+    noconfigdirs="$noconfigdirs ${libgcj}"
     # Do configure ld/binutils/gas for this case.
     ;;
   hppa*-*-*)
@@ -735,25 +759,28 @@ case "${target}" in
 	"" | cc*) noconfigdirs="$noconfigdirs emacs emacs19" ;;
         *) ;;
     esac
-    noconfigdirs="$noconfigdirs ld shellutils"
+    # According to Alexandre Oliva <aoliva@redhat.com>, libjava won't
+    # build on HP-UX 10.20.
+    noconfigdirs="$noconfigdirs ld shellutils ${libgcj}"
     ;;
   ia64*-*-elf*)
     # No gdb support yet.
     noconfigdirs="$noconfigdirs tix readline mmalloc libgui itcl gdb"
     ;;
   i[3456]86-*-coff | i[3456]86-*-elf)
-    noconfigdirs="${libgcj}"
+    noconfigdirs="$noconfigdirs ${libgcj}"
     if [ x${is_cross_compiler} != xno ] ; then
          target_configdirs="${target_configdirs} target-libstub target-cygmon"
     fi
     ;;
   *-*-linux*)
+    noconfigdirs="$noconfigdirs target-newlib target-libgloss"
     # linux has rx in libc
     skipdirs="$skipdirs target-librx"
     ;;
   i[3456]86-*-mingw32*)
     target_configdirs="$target_configdirs target-mingw"
-    noconfigdirs="$noconfigdirs expect target-libgloss"
+    noconfigdirs="$noconfigdirs expect target-libgloss ${libgcj}"
 
     # Can't build gdb for mingw32 if not native.
     case "${host}" in
@@ -764,7 +791,7 @@ case "${target}" in
     ;;    
   *-*-cygwin*)
     target_configdirs="$target_configdirs target-libtermcap target-winsup"
-    noconfigdirs="$noconfigdirs target-gperf target-libgloss"
+    noconfigdirs="$noconfigdirs target-gperf target-libgloss ${libgcj}"
     # always build newlib.
     skipdirs=`echo " ${skipdirs} " | sed -e 's/ target-newlib / /'`
 
@@ -799,16 +826,19 @@ case "${target}" in
     noconfigdirs="$noconfigdirs emacs emacs19 target-libgloss ${libgcj}"
     ;;
   i[3456]86-*-beos*)
-     noconfigdirs="$noconfigdirs gdb target-newlib target-libgloss"
+     noconfigdirs="$noconfigdirs gdb target-newlib target-libgloss ${libgcj}"
      ;;
+  m68hc11-*-*|m6811-*-*|m68hc12-*-*|m6812-*-*)
+    noconfigdirs="$noconfigdirs target-libiberty ${libstdcxx_version} ${libgcj}"
+    ;;
   m68k-*-elf*)
-    noconfigdirs="${libgcj}"
+    noconfigdirs="$noconfigdirs ${libgcj}"
     if [ x${is_cross_compiler} != xno ] ; then
 	   target_configdirs="${target_configdirs} target-bsp target-cygmon"
     fi
     ;;
   m68k-*-coff*)
-    noconfigdirs="${libgcj}"
+    noconfigdirs="$noconfigdirs ${libgcj}"
     if [ x${is_cross_compiler} != xno ] ; then
 	   target_configdirs="${target_configdirs} target-bsp target-cygmon"
     fi
@@ -848,7 +878,7 @@ case "${target}" in
     noconfigdirs="$noconfigdirs gdb target-newlib target-libgloss ${libgcj}"
     ;;
   powerpc-*-eabi)
-    noconfigdirs="${libgcj}"
+    noconfigdirs="$noconfigdirs ${libgcj}"
     if [ x${is_cross_compiler} != xno ] ; then
 	   target_configdirs="${target_configdirs} target-bsp target-libstub target-cygmon"
     fi
@@ -879,7 +909,11 @@ case "${target}" in
   mips*-*-irix6*)
     # The GNU assembler does not support IRIX 6.
     # emacs is emacs 18, which does not work on Irix 5 (emacs19 does work)
-    noconfigdirs="$noconfigdirs gas gprof emacs target-libgloss"
+    # Linking libjava exceeds command-line length limits on at least
+    # IRIX 6.2, but not on IRIX 6.5.
+    # Also, boehm-gc won't build on IRIX 6.5, according to Jeffrey Oldham
+    # <oldham@codesourcery.com>
+    noconfigdirs="$noconfigdirs gas gprof emacs target-libgloss ${libgcj}"
     ;;
   mips*-dec-bsd*)
     noconfigdirs="$noconfigdirs gprof target-libgloss ${libgcj}"
@@ -920,10 +954,10 @@ case "${target}" in
     if [ x${is_cross_compiler} != xno ] ; then
 	   target_configdirs="${target_configdirs} target-bsp target-libstub target-cygmon"
     fi
-    noconfigdirs="${libgcj}"
+    noconfigdirs="$noconfigdirs ${libgcj}"
     ;;
   sparc-*-sunos4*)
-    noconfigdirs="${libgcj}"
+    noconfigdirs="$noconfigdirs ${libgcj}"
     if [ x${is_cross_compiler} != xno ] ; then
            noconfigdirs="$noconfigdirs gdb gdbtest target-newlib target-libgloss"
     else
@@ -931,6 +965,15 @@ case "${target}" in
     fi
     ;;
   sparc-*-solaris*)
+    case "${host}" in
+    sparc-*-solaris2.8)
+      # According to Gerald Pfeifer <pfeifer@dbai.tuwien.ac.at>, libjava
+      # won't build correctly on Solaris 8 if there's a
+      # previously-installed version of GCC in the configured prefix.
+      # This problem does not show up on earlier versions of Solaris.
+      noconfigdirs="$noconfigdirs ${libgcj}"
+      ;;
+    esac
     ;;
   v810-*-*)
     noconfigdirs="$noconfigdirs bfd binutils gas gcc gdb ld ${libstdcxx_version} opcodes target-libgloss ${libgcj}"
@@ -957,10 +1000,10 @@ case "${target}" in
   *-*-mpw*)
     # Macs want a resource compiler.
     configdirs="$configdirs grez"
-    noconfigdirs="${libgcj}"
+    noconfigdirs="$noconfigdirs ${libgcj}"
     ;;    
   *-*-*)
-    noconfigdirs="${libgcj}"
+    noconfigdirs="$noconfigdirs ${libgcj}"
     ;;
 esac
 
@@ -1256,7 +1299,7 @@ rm -f conftest*
 case "${host}" in
   sparc-sun-solaris2*)
       CCBASE="`echo ${CC-cc} | sed 's/ .*$//'`"
-      if [ "`/usr/bin/which $CCBASE`" = "/usr/ucb/cc" ] ; then
+      if [ "`type $CCBASE | sed 's/^[^/]*//'`" = "/usr/ucb/cc" ] ; then
           could_use=
           [ -d /opt/SUNWspro/bin ] && could_use="/opt/SUNWspro/bin"
           if [ -d /opt/cygnus/bin ] ; then