X-Git-Url: https://git.libre-soc.org/?a=blobdiff_plain;f=gdb%2Fbreakpoint.h;h=bd097137e6ffa1ddbb4cd34bd6f0e69b348733b3;hb=8fbca658f0643a6c3d5b61840351ae70e5bf2db6;hp=6f5d050d4ab00b7bf983664d5c5cb0e636995709;hpb=0fb4aa4bfcc2aa61c27132f94cf1656dca137dc9;p=binutils-gdb.git diff --git a/gdb/breakpoint.h b/gdb/breakpoint.h index 6f5d050d4ab..bd097137e6f 100644 --- a/gdb/breakpoint.h +++ b/gdb/breakpoint.h @@ -1,6 +1,7 @@ /* Data structures associated with breakpoints in GDB. Copyright (C) 1992, 1993, 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, - 2002, 2003, 2004, 2007, 2008, 2009, 2010 Free Software Foundation, Inc. + 2002, 2003, 2004, 2007, 2008, 2009, 2010, 2011 + Free Software Foundation, Inc. This file is part of GDB. @@ -26,25 +27,28 @@ struct value; struct block; +struct breakpoint_object; +struct get_number_or_range_state; -/* This is the maximum number of bytes a breakpoint instruction can take. - Feel free to increase it. It's just used in a few places to size - arrays that should be independent of the target architecture. */ +/* This is the maximum number of bytes a breakpoint instruction can + take. Feel free to increase it. It's just used in a few places to + size arrays that should be independent of the target + architecture. */ #define BREAKPOINT_MAX 16 /* Type of breakpoint. */ -/* FIXME In the future, we should fold all other breakpoint-like things into - here. This includes: +/* FIXME In the future, we should fold all other breakpoint-like + things into here. This includes: - * single-step (for machines where we have to simulate single stepping) - (probably, though perhaps it is better for it to look as much as - possible like a single-step to wait_for_inferior). */ + * single-step (for machines where we have to simulate single + stepping) (probably, though perhaps it is better for it to look as + much as possible like a single-step to wait_for_inferior). */ enum bptype { - bp_none = 0, /* Eventpoint has been deleted. */ + bp_none = 0, /* Eventpoint has been deleted */ bp_breakpoint, /* Normal breakpoint */ bp_hardware_breakpoint, /* Hardware assisted breakpoint */ bp_until, /* used by until command */ @@ -56,8 +60,16 @@ enum bptype bp_longjmp, /* secret breakpoint to find longjmp() */ bp_longjmp_resume, /* secret breakpoint to escape longjmp() */ - /* Used by wait_for_inferior for stepping over subroutine calls, for - stepping over signal handlers, and for skipping prologues. */ + /* An internal breakpoint that is installed on the unwinder's + debug hook. */ + bp_exception, + /* An internal breakpoint that is set at the point where an + exception will land. */ + bp_exception_resume, + + /* Used by wait_for_inferior for stepping over subroutine calls, + for stepping over signal handlers, and for skipping + prologues. */ bp_step_resume, /* Used to detect when a watchpoint expression has gone out of @@ -75,12 +87,13 @@ enum bptype bp_watchpoint_scope, /* The breakpoint at the end of a call dummy. */ - /* FIXME: What if the function we are calling longjmp()s out of the - call, or the user gets out with the "return" command? We currently - have no way of cleaning up the breakpoint in these (obscure) situations. - (Probably can solve this by noticing longjmp, "return", etc., it's - similar to noticing when a watchpoint on a local variable goes out - of scope (with hardware support for watchpoints)). */ + /* FIXME: What if the function we are calling longjmp()s out of + the call, or the user gets out with the "return" command? We + currently have no way of cleaning up the breakpoint in these + (obscure) situations. (Probably can solve this by noticing + longjmp, "return", etc., it's similar to noticing when a + watchpoint on a local variable goes out of scope (with hardware + support for watchpoints)). */ bp_call_dummy, /* A breakpoint set on std::terminate, that is used to catch @@ -125,6 +138,9 @@ enum bptype /* Master copies of std::terminate breakpoints. */ bp_std_terminate_master, + /* Like bp_longjmp_master, but for exceptions. */ + bp_exception_master, + bp_catchpoint, bp_tracepoint, @@ -135,39 +151,46 @@ enum bptype bp_jit_event, }; -/* States of enablement of breakpoint. */ +/* States of enablement of breakpoint. */ enum enable_state { - bp_disabled, /* The eventpoint is inactive, and cannot trigger. */ - bp_enabled, /* The eventpoint is active, and can trigger. */ - bp_call_disabled, /* The eventpoint has been disabled while a call - into the inferior is "in flight", because some - eventpoints interfere with the implementation of - a call on some targets. The eventpoint will be - automatically enabled and reset when the call - "lands" (either completes, or stops at another - eventpoint). */ - bp_startup_disabled,/* The eventpoint has been disabled during inferior - startup. This is necessary on some targets where - the main executable will get relocated during - startup, making breakpoint addresses invalid. - The eventpoint will be automatically enabled and - reset once inferior startup is complete. */ - bp_permanent /* There is a breakpoint instruction hard-wired into - the target's code. Don't try to write another - breakpoint instruction on top of it, or restore - its value. Step over it using the architecture's - SKIP_INSN macro. */ + bp_disabled, /* The eventpoint is inactive, and cannot + trigger. */ + bp_enabled, /* The eventpoint is active, and can + trigger. */ + bp_call_disabled, /* The eventpoint has been disabled while a + call into the inferior is "in flight", + because some eventpoints interfere with + the implementation of a call on some + targets. The eventpoint will be + automatically enabled and reset when the + call "lands" (either completes, or stops + at another eventpoint). */ + bp_startup_disabled, /* The eventpoint has been disabled during + inferior startup. This is necessary on + some targets where the main executable + will get relocated during startup, making + breakpoint addresses invalid. The + eventpoint will be automatically enabled + and reset once inferior startup is + complete. */ + bp_permanent /* There is a breakpoint instruction + hard-wired into the target's code. Don't + try to write another breakpoint + instruction on top of it, or restore its + value. Step over it using the + architecture's SKIP_INSN macro. */ }; -/* Disposition of breakpoint. Ie: what to do after hitting it. */ +/* Disposition of breakpoint. Ie: what to do after hitting it. */ enum bpdisp { disp_del, /* Delete it */ - disp_del_at_next_stop, /* Delete at next stop, whether hit or not */ + disp_del_at_next_stop, /* Delete at next stop, + whether hit or not */ disp_disable, /* Disable it */ disp_donttouch /* Leave it alone */ }; @@ -205,11 +228,11 @@ struct bp_target_info int shadow_len; /* The size of the placed breakpoint, according to - gdbarch_breakpoint_from_pc, when the breakpoint was inserted. This is - generally the same as SHADOW_LEN, unless we did not need + gdbarch_breakpoint_from_pc, when the breakpoint was inserted. + This is generally the same as SHADOW_LEN, unless we did not need to read from the target to implement the memory breakpoint - (e.g. if a remote stub handled the details). We may still - need the size to remove the breakpoint safely. */ + (e.g. if a remote stub handled the details). We may still need + the size to remove the breakpoint safely. */ int placed_size; }; @@ -240,13 +263,18 @@ struct bp_location the same parent breakpoint. */ struct bp_location *next; + /* The reference count. */ + int refc; + /* Type of this breakpoint location. */ enum bp_loc_type loc_type; /* Each breakpoint location must belong to exactly one higher-level - breakpoint. This and the DUPLICATE flag are more straightforward - than reference counting. This pointer is NULL iff this bp_location is in - (and therefore only in) moribund_locations. */ + breakpoint. This pointer is NULL iff this bp_location is no + longer attached to a breakpoint. For example, when a breakpoint + is deleted, its locations may still be found in the + moribund_locations list, or if we had stopped for it, in + bpstats. */ struct breakpoint *owner; /* Conditional. Break only if this expression's value is nonzero. @@ -297,14 +325,16 @@ struct bp_location bp_loc_other. */ CORE_ADDR address; - /* For hardware watchpoints, the size of data ad ADDRESS being watches. */ + /* For hardware watchpoints, the size of the memory region being + watched. */ int length; - /* Type of hardware watchpoint. */ + /* Type of hardware watchpoint. */ enum target_hw_bp_type watchpoint_type; /* For any breakpoint type with an address, this is the section - associated with the address. Used primarily for overlay debugging. */ + associated with the address. Used primarily for overlay + debugging. */ struct obj_section *section; /* Address at which breakpoint was requested, either by the user or @@ -339,30 +369,38 @@ struct bp_location will be called instead of the performing the default action for this bptype. */ -struct breakpoint_ops +struct breakpoint_ops { - /* Insert the breakpoint or activate the catchpoint. Should raise - an exception if the operation failed. */ - void (*insert) (struct breakpoint *); + /* Insert the breakpoint or watchpoint or activate the catchpoint. + Return 0 for success, 1 if the breakpoint, watchpoint or catchpoint + type is not supported, -1 for failure. */ + int (*insert_location) (struct bp_location *); /* Remove the breakpoint/catchpoint that was previously inserted - with the "insert" method above. Return non-zero if the operation - succeeded. */ - int (*remove) (struct breakpoint *); + with the "insert" method above. Return 0 for success, 1 if the + breakpoint, watchpoint or catchpoint type is not supported, + -1 for failure. */ + int (*remove_location) (struct bp_location *); /* Return non-zero if the debugger should tell the user that this breakpoint was hit. */ int (*breakpoint_hit) (struct breakpoint *); + /* Tell how many hardware resources (debug registers) are needed + for this breakpoint. If this function is not provided, then + the breakpoint or watchpoint needs one debug register. */ + int (*resources_needed) (const struct bp_location *); + /* The normal print routine for this breakpoint, called when we hit it. */ enum print_stop_action (*print_it) (struct breakpoint *); - /* Display information about this breakpoint, for "info breakpoints". */ + /* Display information about this breakpoint, for "info + breakpoints". */ void (*print_one) (struct breakpoint *, struct bp_location **); - /* Display information about this breakpoint after setting it (roughly - speaking; this is called from "mention"). */ + /* Display information about this breakpoint after setting it + (roughly speaking; this is called from "mention"). */ void (*print_mention) (struct breakpoint *); /* Print to FP the CLI command that recreates this breakpoint. */ @@ -393,6 +431,13 @@ DEF_VEC_P(bp_location_p); detail to the breakpoints module. */ struct counted_command_line; +/* Some targets (e.g., embedded PowerPC) need two debug registers to set + a watchpoint over a memory region. If this flag is true, GDB will use + only one register per watchpoint, thus assuming that all acesses that + modify a memory location happen at its starting address. */ + +extern int target_exact_watchpoints; + /* Note that the ->silent field is not currently used by any commands (though the code is in there if it was to be, and set_raw_breakpoint does set it to 0). I implemented it because I thought it would be @@ -404,11 +449,11 @@ struct counted_command_line; struct breakpoint { struct breakpoint *next; - /* Type of breakpoint. */ + /* Type of breakpoint. */ enum bptype type; /* Zero means disabled; remember the info but don't break here. */ enum enable_state enable_state; - /* What to do with this breakpoint after we hit it. */ + /* What to do with this breakpoint after we hit it. */ enum bpdisp disposition; /* Number assigned to distinguish breakpoints. */ int number; @@ -425,12 +470,13 @@ struct breakpoint char *source_file; /* Non-zero means a silent breakpoint (don't print frame info - if we stop here). */ + if we stop here). */ unsigned char silent; /* Number of stops at this breakpoint that should be continued automatically before really stopping. */ int ignore_count; - /* Chain of command lines to execute when this breakpoint is hit. */ + /* Chain of command lines to execute when this breakpoint is + hit. */ struct counted_command_line *commands; /* Stack depth (address of frame). If nonzero, break only if fp equals this. */ @@ -447,11 +493,14 @@ struct breakpoint enum language language; /* Input radix we used to set the breakpoint. */ int input_radix; - /* String form of the breakpoint condition (malloc'd), or NULL if there - is no condition. */ + /* String form of the breakpoint condition (malloc'd), or NULL if + there is no condition. */ char *cond_string; - /* String form of exp (malloc'd), or NULL if none. */ + /* String form of exp to use for displaying to the user + (malloc'd), or NULL if none. */ char *exp_string; + /* String form to use for reparsing of EXP (malloc'd) or NULL. */ + char *exp_string_reparse; /* The expression we are watching, or NULL if not a watchpoint. */ struct expression *exp; @@ -472,9 +521,10 @@ struct breakpoint int val_valid; /* Holds the address of the related watchpoint_scope breakpoint - when using watchpoints on local variables (might the concept - of a related breakpoint be useful elsewhere, if not just call - it the watchpoint_scope breakpoint or something like that. FIXME). */ + when using watchpoints on local variables (might the concept of + a related breakpoint be useful elsewhere, if not just call it + the watchpoint_scope breakpoint or something like that. + FIXME). */ struct breakpoint *related_breakpoint; /* Holds the frame address which identifies the frame this @@ -491,10 +541,12 @@ struct breakpoint hardware. */ enum watchpoint_triggered watchpoint_triggered; - /* Thread number for thread-specific breakpoint, or -1 if don't care. */ + /* Thread number for thread-specific breakpoint, + or -1 if don't care. */ int thread; - /* Ada task number for task-specific breakpoint, or 0 if don't care. */ + /* Ada task number for task-specific breakpoint, + or 0 if don't care. */ int task; /* Count of the number of times this breakpoint was taken, dumped @@ -513,10 +565,10 @@ struct breakpoint triggered. */ char *exec_pathname; - /* Syscall numbers used for the 'catch syscall' feature. - If no syscall has been specified for filtering, its value is NULL. - Otherwise, it holds a list of all syscalls to be caught. - The list elements are allocated with xmalloc. */ + /* Syscall numbers used for the 'catch syscall' feature. If no + syscall has been specified for filtering, its value is NULL. + Otherwise, it holds a list of all syscalls to be caught. The + list elements are allocated with xmalloc. */ VEC(int) *syscalls_to_be_caught; /* Methods associated with this breakpoint. */ @@ -549,6 +601,16 @@ struct breakpoint breakpoints, we will use this index to try to find the same marker again. */ int static_trace_marker_id_idx; + + /* With a Python scripting enabled GDB, store a reference to the + Python object that has been associated with this breakpoint. + This is always NULL for a GDB that is not script enabled. It + can sometimes be NULL for enabled GDBs as not all breakpoint + types are tracked by the Python scripting API. */ + struct breakpoint_object *py_bp_object; + + /* Whether this watchpoint is exact (see target_exact_watchpoints). */ + int exact; }; typedef struct breakpoint *breakpoint_p; @@ -560,10 +622,6 @@ DEF_VEC_P(breakpoint_p); typedef struct bpstats *bpstat; -/* Frees any storage that is part of a bpstat. - Does not walk the 'next' chain. */ -extern void bpstat_free (bpstat); - /* Clears a chain of bpstat, freeing storage of each. */ extern void bpstat_clear (bpstat *); @@ -599,15 +657,16 @@ enum bpstat_what_main_action BPSTAT_WHAT_KEEP_CHECKING, /* Remove breakpoints, single step once, then put them back in and - go back to what we were doing. It's possible that this should be - removed from the main_action and put into a separate field, to more - cleanly handle BPSTAT_WHAT_CLEAR_LONGJMP_RESUME_SINGLE. */ + go back to what we were doing. It's possible that this should + be removed from the main_action and put into a separate field, + to more cleanly handle + BPSTAT_WHAT_CLEAR_LONGJMP_RESUME_SINGLE. */ BPSTAT_WHAT_SINGLE, /* Set longjmp_resume breakpoint, remove all other breakpoints, - and continue. The "remove all other breakpoints" part is required - if we are also stepping over another breakpoint as well as doing - the longjmp handling. */ + and continue. The "remove all other breakpoints" part is + required if we are also stepping over another breakpoint as + well as doing the longjmp handling. */ BPSTAT_WHAT_SET_LONGJMP_RESUME, /* Clear longjmp_resume breakpoint, then handle as @@ -617,8 +676,8 @@ enum bpstat_what_main_action /* Rather than distinguish between noisy and silent stops here, it might be cleaner to have bpstat_print make that decision (also taking into account stop_print_frame and source_only). But the - implications are a bit scary (interaction with auto-displays, etc.), - so I won't try it. */ + implications are a bit scary (interaction with auto-displays, + etc.), so I won't try it. */ /* Stop silently. */ BPSTAT_WHAT_STOP_SILENT, @@ -648,15 +707,20 @@ struct bpstat_what { enum bpstat_what_main_action main_action; - /* Did we hit a call dummy breakpoint? This only goes with a main_action - of BPSTAT_WHAT_STOP_SILENT or BPSTAT_WHAT_STOP_NOISY (the concept of - continuing from a call dummy without popping the frame is not a - useful one). */ + /* Did we hit a call dummy breakpoint? This only goes with a + main_action of BPSTAT_WHAT_STOP_SILENT or + BPSTAT_WHAT_STOP_NOISY (the concept of continuing from a call + dummy without popping the frame is not a useful one). */ enum stop_stack_kind call_dummy; + + /* Used for BPSTAT_WHAT_SET_LONGJMP_RESUME and + BPSTAT_WHAT_CLEAR_LONGJMP_RESUME. True if we are handling a + longjmp, false if we are handling an exception. */ + int is_longjmp; }; /* The possible return values for print_bpstat, print_it_normal, - print_it_done, print_it_noop. */ + print_it_done, print_it_noop. */ enum print_stop_action { PRINT_UNKNOWN = -1, @@ -668,7 +732,7 @@ enum print_stop_action /* Tell what to do about this bpstat. */ struct bpstat_what bpstat_what (bpstat); -/* Find the bpstat associated with a breakpoint. NULL otherwise. */ +/* Find the bpstat associated with a breakpoint. NULL otherwise. */ bpstat bpstat_find_breakpoint (bpstat, struct breakpoint *); /* Nonzero if a signal that we got in wait() was due to circumstances @@ -690,10 +754,11 @@ extern int bpstat_should_step (void); return means print the frame as well as the source line). */ extern enum print_stop_action bpstat_print (bpstat); -/* Put in *NUM the breakpoint number of the first breakpoint we are stopped - at. *BSP upon return is a bpstat which points to the remaining - breakpoints stopped at (but which is not guaranteed to be good for - anything but further calls to bpstat_num). +/* Put in *NUM the breakpoint number of the first breakpoint we are + stopped at. *BSP upon return is a bpstat which points to the + remaining breakpoints stopped at (but which is not guaranteed to be + good for anything but further calls to bpstat_num). + Return 0 if passed a bpstat which does not indicate any breakpoints. Return -1 if stopped at a breakpoint that has been deleted since we set it. @@ -711,15 +776,17 @@ extern void bpstat_clear_actions (bpstat); /* Implementation: */ -/* Values used to tell the printing routine how to behave for this bpstat. */ +/* Values used to tell the printing routine how to behave for this + bpstat. */ enum bp_print_how { /* This is used when we want to do a normal printing of the reason - for stopping. The output will depend on the type of eventpoint - we are dealing with. This is the default value, most commonly - used. */ + for stopping. The output will depend on the type of eventpoint + we are dealing with. This is the default value, most commonly + used. */ print_it_normal, - /* This is used when nothing should be printed for this bpstat entry. */ + /* This is used when nothing should be printed for this bpstat + entry. */ print_it_noop, /* This is used when everything which needs to be printed has already been printed. But we still want to print the frame. */ @@ -728,16 +795,41 @@ enum bp_print_how struct bpstats { - /* Linked list because there can be two breakpoints at the same - place, and a bpstat reflects the fact that both have been hit. */ + /* Linked list because there can be more than one breakpoint at + the same place, and a bpstat reflects the fact that all have + been hit. */ bpstat next; - /* Breakpoint that we are at. */ - const struct bp_location *breakpoint_at; + + /* Location that caused the stop. Locations are refcounted, so + this will never be NULL. Note that this location may end up + detached from a breakpoint, but that does not necessary mean + that the struct breakpoint is gone. E.g., consider a + watchpoint with a condition that involves an inferior function + call. Watchpoint locations are recreated often (on resumes, + hence on infcalls too). Between creating the bpstat and after + evaluating the watchpoint condition, this location may hence + end up detached from its original owner watchpoint, even though + the watchpoint is still listed. If it's condition evaluates as + true, we still want this location to cause a stop, and we will + still need to know which watchpoint it was originally attached. + What this means is that we should not (in most cases) follow + the `bpstat->bp_location->owner' link, but instead use the + `breakpoint_at' field below. */ + struct bp_location *bp_location_at; + + /* Breakpoint that caused the stop. This is nullified if the + breakpoint ends up being deleted. See comments on + `bp_location_at' above for why do we need this field instead of + following the location's owner. */ + struct breakpoint *breakpoint_at; + /* The associated command list. */ struct counted_command_line *commands; + /* Commands left to be done. This points somewhere in base_command. */ struct command_line *commands_left; + /* Old value associated with a watchpoint. */ struct value *old_val; @@ -772,15 +864,18 @@ enum breakpoint_here /* Prototypes for breakpoint-related functions. */ -extern enum breakpoint_here breakpoint_here_p (struct address_space *, CORE_ADDR); +extern enum breakpoint_here breakpoint_here_p (struct address_space *, + CORE_ADDR); extern int moribund_breakpoint_here_p (struct address_space *, CORE_ADDR); extern int breakpoint_inserted_here_p (struct address_space *, CORE_ADDR); -extern int regular_breakpoint_inserted_here_p (struct address_space *, CORE_ADDR); +extern int regular_breakpoint_inserted_here_p (struct address_space *, + CORE_ADDR); -extern int software_breakpoint_inserted_here_p (struct address_space *, CORE_ADDR); +extern int software_breakpoint_inserted_here_p (struct address_space *, + CORE_ADDR); /* Returns true if there's a hardware watchpoint or access watchpoint inserted in the range defined by ADDR and LEN. */ @@ -788,7 +883,8 @@ extern int hardware_watchpoint_inserted_in_range (struct address_space *, CORE_ADDR addr, ULONGEST len); -extern int breakpoint_thread_match (struct address_space *, CORE_ADDR, ptid_t); +extern int breakpoint_thread_match (struct address_space *, + CORE_ADDR, ptid_t); extern void until_break_command (char *, int, int); @@ -826,9 +922,9 @@ extern void break_command (char *, int); extern void hbreak_command_wrapper (char *, int); extern void thbreak_command_wrapper (char *, int); extern void rbreak_command_wrapper (char *, int); -extern void watch_command_wrapper (char *, int); -extern void awatch_command_wrapper (char *, int); -extern void rwatch_command_wrapper (char *, int); +extern void watch_command_wrapper (char *, int, int); +extern void awatch_command_wrapper (char *, int, int); +extern void rwatch_command_wrapper (char *, int, int); extern void tbreak_command (char *, int); extern int create_breakpoint (struct gdbarch *gdbarch, char *arg, @@ -839,7 +935,8 @@ extern int create_breakpoint (struct gdbarch *gdbarch, char *arg, enum auto_boolean pending_break_support, struct breakpoint_ops *ops, int from_tty, - int enabled); + int enabled, + int internal); extern void insert_breakpoints (void); @@ -849,9 +946,9 @@ extern int remove_breakpoints_pid (int pid); /* This function can be used to physically insert eventpoints from the specified traced inferior process, without modifying the breakpoint - package's state. This can be useful for those targets which support - following the processes of a fork() or vfork() system call, when both - of the resulting two processes are to be followed. */ + package's state. This can be useful for those targets which + support following the processes of a fork() or vfork() system call, + when both of the resulting two processes are to be followed. */ extern int reattach_breakpoints (int); /* This function can be used to update the breakpoint package's state @@ -868,7 +965,7 @@ extern int reattach_breakpoints (int); - A step-resume breakpoint, if any, is explicitly removed from the breakpoint list. - All eventpoints without a symbolic address are removed from the - breakpoint list. */ + breakpoint list. */ extern void update_breakpoints_after_exec (void); /* This function can be used to physically remove hardware breakpoints @@ -887,7 +984,8 @@ extern int detach_breakpoints (int); this PSPACE anymore. */ extern void breakpoint_program_space_exit (struct program_space *pspace); -extern void set_longjmp_breakpoint (int thread); +extern void set_longjmp_breakpoint (struct thread_info *tp, + struct frame_id frame); extern void delete_longjmp_breakpoint (int thread); extern void enable_overlay_breakpoints (void); @@ -935,20 +1033,17 @@ extern void disable_breakpoints_before_startup (void); extern void enable_breakpoints_after_startup (void); /* For script interpreters that need to define breakpoint commands - after they've already read the commands into a struct command_line. */ + after they've already read the commands into a struct + command_line. */ extern enum command_control_type commands_from_control_command (char *arg, struct command_line *cmd); extern void clear_breakpoint_hit_counts (void); -extern int get_number (char **); - -extern int get_number_or_range (char **); - extern struct breakpoint *get_breakpoint (int num); -/* The following are for displays, which aren't really breakpoints, but - here is as good a place as any for them. */ +/* The following are for displays, which aren't really breakpoints, + but here is as good a place as any for them. */ extern void disable_current_display (void); @@ -965,6 +1060,12 @@ extern void enable_breakpoint (struct breakpoint *); extern void breakpoint_set_commands (struct breakpoint *b, struct command_line *commands); +extern void breakpoint_set_silent (struct breakpoint *b, int silent); + +extern void breakpoint_set_thread (struct breakpoint *b, int thread); + +extern void breakpoint_set_task (struct breakpoint *b, int task); + /* Clear the "inserted" flag in all breakpoints. */ extern void mark_breakpoints_out (void); @@ -979,27 +1080,31 @@ extern struct breakpoint *create_solib_event_breakpoint (struct gdbarch *, extern struct breakpoint *create_thread_event_breakpoint (struct gdbarch *, CORE_ADDR); +extern void remove_jit_event_breakpoints (void); + extern void remove_solib_event_breakpoints (void); extern void remove_thread_event_breakpoints (void); extern void disable_breakpoints_in_shlibs (void); -/* This function returns TRUE if ep is a catchpoint. */ +/* This function returns TRUE if ep is a catchpoint. */ extern int ep_is_catchpoint (struct breakpoint *); /* Enable breakpoints and delete when hit. Called with ARG == NULL - deletes all breakpoints. */ + deletes all breakpoints. */ extern void delete_command (char *arg, int from_tty); -/* Pull all H/W watchpoints from the target. Return non-zero if the - remove fails. */ +/* Pull all H/W watchpoints from the target. Return non-zero if the + remove fails. */ extern int remove_hw_watchpoints (void); -/* Manage a software single step breakpoint (or two). Insert may be called - twice before remove is called. */ +/* Manage a software single step breakpoint (or two). Insert may be + called twice before remove is called. */ extern void insert_single_step_breakpoint (struct gdbarch *, - struct address_space *, CORE_ADDR); + struct address_space *, + CORE_ADDR); +extern int single_step_breakpoints_inserted (void); extern void remove_single_step_breakpoints (void); extern void cancel_single_step_breakpoints (void); @@ -1007,7 +1112,8 @@ extern void cancel_single_step_breakpoints (void); breakpoints. These functions are used in murky target-specific ways. Please do not add more uses! */ extern void *deprecated_insert_raw_breakpoint (struct gdbarch *, - struct address_space *, CORE_ADDR); + struct address_space *, + CORE_ADDR); extern int deprecated_remove_raw_breakpoint (struct gdbarch *, void *); /* Check if any hardware watchpoints have triggered, according to the @@ -1039,17 +1145,16 @@ extern int catch_syscall_enabled (void); Returns 0 if not, greater than 0 if we are. */ extern int catching_syscall_number (int syscall_number); -/* Tell a breakpoint to be quiet. */ -extern void make_breakpoint_silent (struct breakpoint *); - /* Return a tracepoint with the given number if found. */ extern struct breakpoint *get_tracepoint (int num); extern struct breakpoint *get_tracepoint_by_number_on_target (int num); /* Find a tracepoint by parsing a number in the supplied string. */ -extern struct breakpoint *get_tracepoint_by_number (char **arg, int multi_p, - int optional_p); +extern struct breakpoint * + get_tracepoint_by_number (char **arg, + struct get_number_or_range_state *state, + int optional_p); /* Return a vector of all tracepoints currently defined. The vector is newly allocated; the caller should free when done with it. */ @@ -1071,4 +1176,17 @@ extern void check_tracepoint_command (char *line, void *closure); extern void start_rbreak_breakpoints (void); extern void end_rbreak_breakpoints (void); +/* Breakpoint iterator function. + + Calls a callback function once for each breakpoint, so long as the + callback function returns false. If the callback function returns + true, the iteration will end and the current breakpoint will be + returned. This can be useful for implementing a search for a + breakpoint with arbitrary attributes, or for applying an operation + to every breakpoint. */ +extern struct breakpoint *iterate_over_breakpoints (int (*) (struct breakpoint *, + void *), void *); + +extern int user_breakpoint_p (struct breakpoint *); + #endif /* !defined (BREAKPOINT_H) */