X-Git-Url: https://git.libre-soc.org/?a=blobdiff_plain;f=gdb%2Fserial.h;h=9e669cbb2bb1fb0bf6f3f45df3e9fd060e278cee;hb=2fe3b329f69ca294a8ad3f1f655df7db33a6eb65;hp=1fbd488c8b69418f7ea7bfa93415f1bc0ed2ddd8;hpb=4febd10272e10062f09c8456dacd8cfe970579d8;p=binutils-gdb.git

diff --git a/gdb/serial.h b/gdb/serial.h
index 1fbd488c8b6..9e669cbb2bb 100644
--- a/gdb/serial.h
+++ b/gdb/serial.h
@@ -17,18 +17,25 @@ You should have received a copy of the GNU General Public License
 along with this program; if not, write to the Free Software
 Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.  */
 
+#ifndef SERIAL_H
+#define SERIAL_H
+
 /* Terminal state pointer.  This is specific to each type of interface. */
 
-typedef PTR ttystate;
+typedef PTR serial_ttystate;
 
 struct _serial_t
 {
-  int fd;
-  struct serial_ops *ops;
-  ttystate ttystate;
-  int bufcnt;
-  unsigned char *bufp;
-  unsigned char buf[BUFSIZ];
+  int fd;			/* File descriptor */
+  struct serial_ops *ops;	/* Function vector */
+  serial_ttystate ttystate;	/* Not used (yet) */
+  int bufcnt;			/* Amount of data in receive buffer */
+  unsigned char *bufp;		/* Current byte */
+  unsigned char buf[BUFSIZ];	/* Da buffer itself */
+  int current_timeout;		/* (termio{s} only), last value of VTIME */
+  /* ser-unix.c termio{,s} only, we still need to wait for this many more
+     seconds.  */
+  int timeout_remaining;
 };
 
 typedef struct _serial_t *serial_t;
@@ -40,8 +47,15 @@ struct serial_ops {
   void (*close) PARAMS ((serial_t));
   int (*readchar) PARAMS ((serial_t, int timeout));
   int (*write) PARAMS ((serial_t, const char *str, int len));
+  int (*flush_output) PARAMS ((serial_t));
+  int (*flush_input) PARAMS ((serial_t));
+  int (*send_break) PARAMS ((serial_t));
   void (*go_raw) PARAMS ((serial_t));
-  void (*restore) PARAMS ((serial_t));
+  serial_ttystate (*get_tty_state) PARAMS ((serial_t));
+  int (*set_tty_state) PARAMS ((serial_t, serial_ttystate));
+  void (*print_tty_state) PARAMS ((serial_t, serial_ttystate));
+  int (*noflush_set_tty_state)
+    PARAMS ((serial_t, serial_ttystate, serial_ttystate));
   int (*setbaudrate) PARAMS ((serial_t, int rate));
 };
 
@@ -51,6 +65,8 @@ void serial_add_interface PARAMS ((struct serial_ops *optable));
 
 serial_t serial_open PARAMS ((const char *name));
 
+serial_t serial_fdopen PARAMS ((const int fd));
+
 /* For most routines, if a failure is indicated, then errno should be
    examined.  */
 
@@ -59,13 +75,58 @@ serial_t serial_open PARAMS ((const char *name));
 
 #define SERIAL_OPEN(NAME) serial_open(NAME)
 
+/* Open a new serial stream using a file handle.  */
+
+#define SERIAL_FDOPEN(FD) serial_fdopen(FD)
+
+/* Flush pending output.  Might also flush input (if this system can't flush
+   only output).  */
+
+#define SERIAL_FLUSH_OUTPUT(SERIAL_T) \
+  ((SERIAL_T)->ops->flush_output((SERIAL_T)))
+
+/* Flush pending input.  Might also flush output (if this system can't flush
+   only input).  */
+
+#define SERIAL_FLUSH_INPUT(SERIAL_T)\
+  ((*(SERIAL_T)->ops->flush_input) ((SERIAL_T)))
+
+/* Send a break between 0.25 and 0.5 seconds long.  */
+
+#define SERIAL_SEND_BREAK(SERIAL_T) \
+  ((*(SERIAL_T)->ops->send_break) (SERIAL_T))
+
 /* Turn the port into raw mode. */
 
 #define SERIAL_RAW(SERIAL_T) (SERIAL_T)->ops->go_raw((SERIAL_T))
 
-/* Read one char from the serial device with TIMEOUT seconds timeout.
-   Returns char if ok, else one of the following codes.  Note that all
-   error codes are guaranteed to be < 0.  */
+/* Return a pointer to a newly malloc'd ttystate containing the state
+   of the tty.  */
+#define SERIAL_GET_TTY_STATE(SERIAL_T) (SERIAL_T)->ops->get_tty_state((SERIAL_T))
+
+/* Set the state of the tty to TTYSTATE.  The change is immediate.
+   When changing to or from raw mode, input might be discarded.
+   Returns 0 for success, negative value for error (in which case errno
+   contains the error).  */
+#define SERIAL_SET_TTY_STATE(SERIAL_T, TTYSTATE) (SERIAL_T)->ops->set_tty_state((SERIAL_T), (TTYSTATE))
+
+/* printf_filtered a user-comprehensible description of ttystate.  */
+#define SERIAL_PRINT_TTY_STATE(SERIAL_T, TTYSTATE) \
+  ((*((SERIAL_T)->ops->print_tty_state)) ((SERIAL_T), (TTYSTATE)))
+
+/* Set the tty state to NEW_TTYSTATE, where OLD_TTYSTATE is the
+   current state (generally obtained from a recent call to
+   SERIAL_GET_TTY_STATE), but be careful not to discard any input.
+   This means that we never switch in or out of raw mode, even
+   if NEW_TTYSTATE specifies a switch.  */
+#define SERIAL_NOFLUSH_SET_TTY_STATE(SERIAL_T, NEW_TTYSTATE, OLD_TTYSTATE) \
+  ((*((SERIAL_T)->ops->noflush_set_tty_state)) \
+    ((SERIAL_T), (NEW_TTYSTATE), (OLD_TTYSTATE)))
+
+/* Read one char from the serial device with TIMEOUT seconds to wait
+   or -1 to wait forever.  Use timeout of 0 to effect a poll. Returns
+   char if ok, else one of the following codes.  Note that all error
+   codes are guaranteed to be < 0.  */
 
 #define SERIAL_ERROR -1		/* General error, see errno for details */
 #define SERIAL_TIMEOUT -2
@@ -78,8 +139,8 @@ serial_t serial_open PARAMS ((const char *name));
 
 #define SERIAL_SETBAUDRATE(SERIAL_T, RATE) ((SERIAL_T)->ops->setbaudrate((SERIAL_T), RATE))
 
-/* Write LEN chars from STRING to the port SERIAL_T.  Returns 0 for success,
-   -1 for failure.  */
+/* Write LEN chars from STRING to the port SERIAL_T.  Returns 0 for
+   success, non-zero for failure.  */
 
 #define SERIAL_WRITE(SERIAL_T, STRING, LEN) ((SERIAL_T)->ops->write((SERIAL_T), STRING, LEN))
 
@@ -89,7 +150,9 @@ void serial_close PARAMS ((serial_t));
 
 #define SERIAL_CLOSE(SERIAL_T) serial_close(SERIAL_T)
 
-/* Restore the serial port to the state saved in oldstate.  XXX - currently
-   unused! */
+/* Destroy SERIAL_T without doing the rest of the stuff that SERIAL_CLOSE
+   does.  */
+
+#define SERIAL_UN_FDOPEN(SERIAL_T) (free (SERIAL_T))
 
-#define SERIAL_RESTORE(SERIAL_T) (SERIAL_T)->ops->restore((SERIAL_T))
+#endif /* SERIAL_H */