X-Git-Url: https://git.libre-soc.org/?a=blobdiff_plain;f=simple_v_extension%2Fvblock_format_table.mdwn;h=b3b6a6586f283b360dc67386472b5cf5bc26eb31;hb=b396dccfff47a5f94457f4b43c16c16da77fcc25;hp=d381ede9fd57053164d3c1a9fdc44800bf01f508;hpb=2f9512656c35e7df4e4b161ec265cc3d68520de2;p=libreriscv.git

diff --git a/simple_v_extension/vblock_format_table.mdwn b/simple_v_extension/vblock_format_table.mdwn
index d381ede9f..b3b6a6586 100644
--- a/simple_v_extension/vblock_format_table.mdwn
+++ b/simple_v_extension/vblock_format_table.mdwn
@@ -7,17 +7,55 @@ A suitable prefix, which fits the Expanded Instruction-Length encoding
 for "(80 + 16 times instruction-length)", as defined in Section 1.5
 of the RISC-V ISA, is as follows:
 
-| 15    | 14:12 | 11:10 | 9:8   | 7    | 6:0     |
-| -     | ----- | ----- | ----- | ---  | ------- |
-| vlset | 16xil | pplen | rplen | mode | 1111111 |
+| 15    | 14:12 | 11:10 | 9     | 8     | 7    | 6:0     |
+| -     | ----- | ----- | ----- | ----  | ---  | ------- |
+| vlset | 16xil | rplen | pplen | pmode | rmode | 1111111 |
 
-The VL/MAXVL/SubVL Block format:
+The VL/MAXVL/SubVL Block format, when 16xil != 0b111, is:
 
 [[!table  data="""
-31:30 | 29:28 | 27:22  | 21:19    | 18:16    | comment              |
-0b00  | SubVL | VLdest | imm[5:0]           || VL set from imm      |
-0b01  | SubVL | MVLimm | rs1[2:0] | rd[2:0]  | RVC reg format       |
-0b10  | SubVL | VLdest | imm[5:0]           || VL & MVL set from imm|
-0b11  | rsvd  | rsvd   | rsvd     | rsvd     | reserved, all 0s     |
+31:30 | 29:28 | 27:22    | 21 | 20:19   | 18:16    | comment.................. |
+0b00  | SubVL | imm[5:0] |rsvd| rd[4:0]           || sv.setvl rd, x0, imm      |
+0b01  | SubVL | imm[5:0] | rs1[2:0]    || rd[2:0]  | sv.setvl rd, rs1, imm (1) |
+0b10  | SubVL | imm[5:0] |rsvd|  rs1[4:0]         || sv.setvl x0, rs1, imm     |
+0b11  | rsvd  | rsvd     |rsvd| rsvd              || reserved, all 0s          |
 """]]
 
+Note (1) - Registers are in RVC format (x8-x15)
+
+Note (2) - [[specification/sv.setvl]] behaviour is expected, as if an sv.setvl
+instruction had actually been called.
+
+When 16xil is 0b111, this is the "Extended" Format, using the >= 192-bit
+RISC-V ISA format.  Note that the length is 96+16\*nnnnn, not 192+
+
+| base+5 ... base+3         | base+1  | base             | no. of bits   |
+| ------ -----------------  |         | ---------------- | ------------- |
+| ..xxxx  xxxxxxxxxxxxxxxx  |         | x111xxxxx1111111 | 96+16\*nnnnn |
+| {ops}{Pred}{Reg}{VL Block}| VBLOCK2 | VBLOCK Prefix    |               |
+
+VBLOCK2 extends the VBLOCK fields:
+
+| 15   | 14:12 | 11:10  | 9:8    | 7:5   | 4:0  |
+| ---- | ----- | -----  | ----   | ---   | ---- |
+| rsvd | mapsz | rplen2 | pplen2 | swlen | ilen |
+
+* ilen is the instruction length (number of 16-bit blocks)
+* swlen specifies the number of "swizzle" blocks
+* rplen2 extends rplen by 2 bits
+* pplen2 extends pplen by 2 bits
+* mapsz indicates the size of the "remap" area.  See table below for size
+* 1 bit is reserved for extensions
+
+Mapsz to Remap size is in number of 16-bit blocks:
+
+| mapsz | remap size |
+| ----- | ---------- |
+| 0     | 0          |
+| 1     | 6          |
+| 2     | 7          |
+| 3     | 8          |
+| 4     | 10         |
+| 5     | 12         |
+| 6     | 14         |
+| 7     | 16         |