X-Git-Url: https://git.libre-soc.org/?a=blobdiff_plain;f=src%2Fgallium%2Fdrivers%2Fllvmpipe%2Flp_setup_tri.c;h=d24a4b4afe74a88a26930357cd9e499224db8e6a;hb=ee4f1bc187536d32c30f4505247750754e27f6e4;hp=26d35debdaf3f74e7fdeb9fb00e5a9e2208e2021;hpb=11aa82cc0bda6bd9162f76553a3f68e28978edae;p=mesa.git diff --git a/src/gallium/drivers/llvmpipe/lp_setup_tri.c b/src/gallium/drivers/llvmpipe/lp_setup_tri.c index 26d35debdaf..d24a4b4afe7 100644 --- a/src/gallium/drivers/llvmpipe/lp_setup_tri.c +++ b/src/gallium/drivers/llvmpipe/lp_setup_tri.c @@ -1,6 +1,6 @@ /************************************************************************** * - * Copyright 2007 Tungsten Graphics, Inc., Cedar Park, Texas. + * Copyright 2007 VMware, Inc. * All Rights Reserved. * * Permission is hereby granted, free of charge, to any person obtaining a @@ -18,7 +18,7 @@ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS * OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT. - * IN NO EVENT SHALL TUNGSTEN GRAPHICS AND/OR ITS SUPPLIERS BE LIABLE FOR + * IN NO EVENT SHALL VMWARE AND/OR ITS SUPPLIERS BE LIABLE FOR * ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, * TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN CONNECTION WITH THE * SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE. @@ -38,29 +38,39 @@ #include "lp_rast.h" #include "lp_state_fs.h" #include "lp_state_setup.h" +#include "lp_context.h" + +#include #define NUM_CHANNELS 4 #if defined(PIPE_ARCH_SSE) #include +#elif defined(_ARCH_PWR8) && UTIL_ARCH_LITTLE_ENDIAN +#include +#include "util/u_pwr8.h" #endif - -static INLINE int + +#if !defined(PIPE_ARCH_SSE) + +static inline int subpixel_snap(float a) { return util_iround(FIXED_ONE * a); } -static INLINE float -fixed_to_float(int a) -{ - return a * (1.0 / FIXED_ONE); -} - - - - +#endif +/* Position and area in fixed point coordinates */ +struct fixed_position { + int32_t x[4]; + int32_t y[4]; + int32_t dx01; + int32_t dy01; + int32_t dx20; + int32_t dy20; + int64_t area; +}; /** @@ -81,12 +91,14 @@ lp_setup_alloc_triangle(struct lp_scene *scene, unsigned plane_sz = nr_planes * sizeof(struct lp_rast_plane); struct lp_rast_triangle *tri; + STATIC_ASSERT(sizeof(struct lp_rast_plane) % 8 == 0); + *tri_size = (sizeof(struct lp_rast_triangle) + 3 * input_array_sz + plane_sz); tri = lp_scene_alloc_aligned( scene, *tri_size, 16 ); - if (tri == NULL) + if (!tri) return NULL; tri->inputs.stride = input_array_sz; @@ -179,6 +191,19 @@ lp_rast_tri_tab[MAX_PLANES+1] = { LP_RAST_OP_TRIANGLE_8 }; +static unsigned +lp_rast_32_tri_tab[MAX_PLANES+1] = { + 0, /* should be impossible */ + LP_RAST_OP_TRIANGLE_32_1, + LP_RAST_OP_TRIANGLE_32_2, + LP_RAST_OP_TRIANGLE_32_3, + LP_RAST_OP_TRIANGLE_32_4, + LP_RAST_OP_TRIANGLE_32_5, + LP_RAST_OP_TRIANGLE_32_6, + LP_RAST_OP_TRIANGLE_32_7, + LP_RAST_OP_TRIANGLE_32_8 +}; + /** @@ -197,7 +222,19 @@ lp_setup_whole_tile(struct lp_setup_context *setup, /* if variant is opaque and scissor doesn't effect the tile */ if (inputs->opaque) { - if (!scene->fb.zsbuf) { + /* Several things prevent this optimization from working: + * - For layered rendering we can't determine if this covers the same layer + * as previous rendering (or in case of clears those actually always cover + * all layers so optimization is impossible). Need to use fb_max_layer and + * not setup->layer_slot to determine this since even if there's currently + * no slot assigned previous rendering could have used one. + * - If there were any Begin/End query commands in the scene then those + * would get removed which would be very wrong. Furthermore, if queries + * were just active we also can't do the optimization since to get + * accurate query results we unfortunately need to execute the rendering + * commands. + */ + if (!scene->fb.zsbuf && scene->fb_max_layer == 0 && !scene->had_queries) { /* * All previous rendering will be overwritten so reset the bin. */ @@ -226,41 +263,45 @@ lp_setup_whole_tile(struct lp_setup_context *setup, */ static boolean do_triangle_ccw(struct lp_setup_context *setup, - const float (*v0)[4], - const float (*v1)[4], - const float (*v2)[4], - boolean frontfacing ) + struct fixed_position* position, + const float (*v0)[4], + const float (*v1)[4], + const float (*v2)[4], + boolean frontfacing ) { struct lp_scene *scene = setup->scene; const struct lp_setup_variant_key *key = &setup->setup.variant->key; struct lp_rast_triangle *tri; struct lp_rast_plane *plane; - int x[4]; - int y[4]; - struct u_rect bbox; + const struct u_rect *scissor; + struct u_rect bbox, bboxpos; + boolean s_planes[4]; unsigned tri_bytes; int nr_planes = 3; + unsigned viewport_index = 0; + unsigned layer = 0; + const float (*pv)[4]; + + /* Area should always be positive here */ + assert(position->area > 0); if (0) lp_setup_print_triangle(setup, v0, v1, v2); - if (setup->scissor_test) { - nr_planes = 7; + if (setup->flatshade_first) { + pv = v0; } else { - nr_planes = 3; + pv = v2; + } + if (setup->viewport_index_slot > 0) { + unsigned *udata = (unsigned*)pv[setup->viewport_index_slot]; + viewport_index = lp_clamp_viewport_idx(*udata); + } + if (setup->layer_slot > 0) { + layer = *(unsigned*)pv[setup->layer_slot]; + layer = MIN2(layer, scene->fb_max_layer); } - - /* x/y positions in fixed point */ - x[0] = subpixel_snap(v0[0][0] - setup->pixel_offset); - x[1] = subpixel_snap(v1[0][0] - setup->pixel_offset); - x[2] = subpixel_snap(v2[0][0] - setup->pixel_offset); - x[3] = 0; - y[0] = subpixel_snap(v0[0][1] - setup->pixel_offset); - y[1] = subpixel_snap(v1[0][1] - setup->pixel_offset); - y[2] = subpixel_snap(v2[0][1] - setup->pixel_offset); - y[3] = 0; - /* Bounding rectangle (in pixels) */ { @@ -269,15 +310,15 @@ do_triangle_ccw(struct lp_setup_context *setup, * up needing a bottom-left fill convention, which requires * slightly different rounding. */ - int adj = (setup->pixel_offset != 0) ? 1 : 0; + int adj = (setup->bottom_edge_rule != 0) ? 1 : 0; /* Inclusive x0, exclusive x1 */ - bbox.x0 = MIN3(x[0], x[1], x[2]) >> FIXED_ORDER; - bbox.x1 = (MAX3(x[0], x[1], x[2]) - 1) >> FIXED_ORDER; + bbox.x0 = MIN3(position->x[0], position->x[1], position->x[2]) >> FIXED_ORDER; + bbox.x1 = (MAX3(position->x[0], position->x[1], position->x[2]) - 1) >> FIXED_ORDER; /* Inclusive / exclusive depending upon adj (bottom-left or top-right) */ - bbox.y0 = (MIN3(y[0], y[1], y[2]) + adj) >> FIXED_ORDER; - bbox.y1 = (MAX3(y[0], y[1], y[2]) - 1 + adj) >> FIXED_ORDER; + bbox.y0 = (MIN3(position->y[0], position->y[1], position->y[2]) + adj) >> FIXED_ORDER; + bbox.y1 = (MAX3(position->y[0], position->y[1], position->y[2]) - 1 + adj) >> FIXED_ORDER; } if (bbox.x1 < bbox.x0 || @@ -287,18 +328,32 @@ do_triangle_ccw(struct lp_setup_context *setup, return TRUE; } - if (!u_rect_test_intersection(&setup->draw_region, &bbox)) { + if (!u_rect_test_intersection(&setup->draw_regions[viewport_index], &bbox)) { if (0) debug_printf("offscreen\n"); LP_COUNT(nr_culled_tris); return TRUE; } + bboxpos = bbox; + /* Can safely discard negative regions, but need to keep hold of * information about when the triangle extends past screen * boundaries. See trimmed_box in lp_setup_bin_triangle(). */ - bbox.x0 = MAX2(bbox.x0, 0); - bbox.y0 = MAX2(bbox.y0, 0); + bboxpos.x0 = MAX2(bboxpos.x0, 0); + bboxpos.y0 = MAX2(bboxpos.y0, 0); + + nr_planes = 3; + /* + * Determine how many scissor planes we need, that is drop scissor + * edges if the bounding box of the tri is fully inside that edge. + */ + if (setup->scissor_test) { + /* why not just use draw_regions */ + scissor = &setup->scissors[viewport_index]; + scissor_planes_needed(s_planes, &bboxpos, scissor); + nr_planes += s_planes[0] + s_planes[1] + s_planes[2] + s_planes[3]; + } tri = lp_setup_alloc_triangle(scene, key->num_inputs, @@ -307,7 +362,7 @@ do_triangle_ccw(struct lp_setup_context *setup, if (!tri) return FALSE; -#if 0 +#ifdef DEBUG tri->v[0][0] = v0[0][0]; tri->v[1][0] = v1[0][0]; tri->v[2][0] = v2[0][0]; @@ -320,42 +375,42 @@ do_triangle_ccw(struct lp_setup_context *setup, /* Setup parameter interpolants: */ - setup->setup.variant->jit_function( v0, - v1, - v2, - frontfacing, - GET_A0(&tri->inputs), - GET_DADX(&tri->inputs), - GET_DADY(&tri->inputs) ); + setup->setup.variant->jit_function(v0, v1, v2, + frontfacing, + GET_A0(&tri->inputs), + GET_DADX(&tri->inputs), + GET_DADY(&tri->inputs)); tri->inputs.frontfacing = frontfacing; tri->inputs.disable = FALSE; tri->inputs.opaque = setup->fs.current.variant->opaque; + tri->inputs.layer = layer; + tri->inputs.viewport_index = viewport_index; if (0) lp_dump_setup_coef(&setup->setup.variant->key, - (const float (*)[4])GET_A0(&tri->inputs), - (const float (*)[4])GET_DADX(&tri->inputs), - (const float (*)[4])GET_DADY(&tri->inputs)); + (const float (*)[4])GET_A0(&tri->inputs), + (const float (*)[4])GET_DADX(&tri->inputs), + (const float (*)[4])GET_DADY(&tri->inputs)); plane = GET_PLANES(tri); #if defined(PIPE_ARCH_SSE) - { + if (1) { __m128i vertx, verty; __m128i shufx, shufy; - __m128i dcdx, dcdy, c; - __m128i unused; + __m128i dcdx, dcdy; + __m128i cdx02, cdx13, cdy02, cdy13, c02, c13; + __m128i c01, c23, unused; __m128i dcdx_neg_mask; __m128i dcdy_neg_mask; __m128i dcdx_zero_mask; - __m128i top_left_flag; - __m128i c_inc_mask, c_inc; + __m128i top_left_flag, c_dec; __m128i eo, p0, p1, p2; __m128i zero = _mm_setzero_si128(); - vertx = _mm_loadu_si128((__m128i *)x); /* vertex x coords */ - verty = _mm_loadu_si128((__m128i *)y); /* vertex y coords */ + vertx = _mm_load_si128((__m128i *)position->x); /* vertex x coords */ + verty = _mm_load_si128((__m128i *)position->y); /* vertex y coords */ shufx = _mm_shuffle_epi32(vertx, _MM_SHUFFLE(3,0,2,1)); shufy = _mm_shuffle_epi32(verty, _MM_SHUFFLE(3,0,2,1)); @@ -367,77 +422,195 @@ do_triangle_ccw(struct lp_setup_context *setup, dcdx_zero_mask = _mm_cmpeq_epi32(dcdx, zero); dcdy_neg_mask = _mm_srai_epi32(dcdy, 31); - top_left_flag = _mm_set1_epi32((setup->pixel_offset == 0) ? ~0 : 0); + top_left_flag = _mm_set1_epi32((setup->bottom_edge_rule == 0) ? ~0 : 0); - c_inc_mask = _mm_or_si128(dcdx_neg_mask, - _mm_and_si128(dcdx_zero_mask, - _mm_xor_si128(dcdy_neg_mask, - top_left_flag))); - - c_inc = _mm_srli_epi32(c_inc_mask, 31); + c_dec = _mm_or_si128(dcdx_neg_mask, + _mm_and_si128(dcdx_zero_mask, + _mm_xor_si128(dcdy_neg_mask, + top_left_flag))); - c = _mm_sub_epi32(mm_mullo_epi32(dcdx, vertx), - mm_mullo_epi32(dcdy, verty)); - - c = _mm_add_epi32(c, c_inc); + /* + * 64 bit arithmetic. + * Note we need _signed_ mul (_mm_mul_epi32) which we emulate. + */ + cdx02 = mm_mullohi_epi32(dcdx, vertx, &cdx13); + cdy02 = mm_mullohi_epi32(dcdy, verty, &cdy13); + c02 = _mm_sub_epi64(cdx02, cdy02); + c13 = _mm_sub_epi64(cdx13, cdy13); + c02 = _mm_sub_epi64(c02, _mm_shuffle_epi32(c_dec, + _MM_SHUFFLE(2,2,0,0))); + c13 = _mm_sub_epi64(c13, _mm_shuffle_epi32(c_dec, + _MM_SHUFFLE(3,3,1,1))); + + /* + * Useful for very small fbs/tris (or fewer subpixel bits) only: + * c = _mm_sub_epi32(mm_mullo_epi32(dcdx, vertx), + * mm_mullo_epi32(dcdy, verty)); + * + * c = _mm_sub_epi32(c, c_dec); + */ /* Scale up to match c: */ dcdx = _mm_slli_epi32(dcdx, FIXED_ORDER); dcdy = _mm_slli_epi32(dcdy, FIXED_ORDER); - /* Calculate trivial reject values: + /* + * Calculate trivial reject values: + * Note eo cannot overflow even if dcdx/dcdy would already have + * 31 bits (which they shouldn't have). This is because eo + * is never negative (albeit if we rely on that need to be careful...) */ eo = _mm_sub_epi32(_mm_andnot_si128(dcdy_neg_mask, dcdy), _mm_and_si128(dcdx_neg_mask, dcdx)); /* ei = _mm_sub_epi32(_mm_sub_epi32(dcdy, dcdx), eo); */ + /* + * Pointless transpose which gets undone immediately in + * rasterization. + * It is actually difficult to do away with it - would essentially + * need GET_PLANES_DX, GET_PLANES_DY etc., but the calculations + * for this then would need to depend on the number of planes. + * The transpose is quite special here due to c being 64bit... + * The store has to be unaligned (unless we'd make the plane size + * a multiple of 128), and of course storing eo separately... + */ + c01 = _mm_unpacklo_epi64(c02, c13); + c23 = _mm_unpackhi_epi64(c02, c13); + transpose2_64_2_32(&c01, &c23, &dcdx, &dcdy, + &p0, &p1, &p2, &unused); + _mm_storeu_si128((__m128i *)&plane[0], p0); + plane[0].eo = (uint32_t)_mm_cvtsi128_si32(eo); + _mm_storeu_si128((__m128i *)&plane[1], p1); + eo = _mm_shuffle_epi32(eo, _MM_SHUFFLE(3,2,0,1)); + plane[1].eo = (uint32_t)_mm_cvtsi128_si32(eo); + _mm_storeu_si128((__m128i *)&plane[2], p2); + eo = _mm_shuffle_epi32(eo, _MM_SHUFFLE(0,0,0,2)); + plane[2].eo = (uint32_t)_mm_cvtsi128_si32(eo); + } else +#elif defined(_ARCH_PWR8) && UTIL_ARCH_LITTLE_ENDIAN + /* + * XXX this code is effectively disabled for all practical purposes, + * as the allowed fb size is tiny if FIXED_ORDER is 8. + */ + if (setup->fb.width <= MAX_FIXED_LENGTH32 && + setup->fb.height <= MAX_FIXED_LENGTH32 && + (bbox.x1 - bbox.x0) <= MAX_FIXED_LENGTH32 && + (bbox.y1 - bbox.y0) <= MAX_FIXED_LENGTH32) { + unsigned int bottom_edge; + __m128i vertx, verty; + __m128i shufx, shufy; + __m128i dcdx, dcdy, c; + __m128i unused; + __m128i dcdx_neg_mask; + __m128i dcdy_neg_mask; + __m128i dcdx_zero_mask; + __m128i top_left_flag; + __m128i c_inc_mask, c_inc; + __m128i eo, p0, p1, p2; + __m128i_union vshuf_mask; + __m128i zero = vec_splats((unsigned char) 0); + PIPE_ALIGN_VAR(16) int32_t temp_vec[4]; + +#if UTIL_ARCH_LITTLE_ENDIAN + vshuf_mask.i[0] = 0x07060504; + vshuf_mask.i[1] = 0x0B0A0908; + vshuf_mask.i[2] = 0x03020100; + vshuf_mask.i[3] = 0x0F0E0D0C; +#else + vshuf_mask.i[0] = 0x00010203; + vshuf_mask.i[1] = 0x0C0D0E0F; + vshuf_mask.i[2] = 0x04050607; + vshuf_mask.i[3] = 0x08090A0B; +#endif + + /* vertex x coords */ + vertx = vec_load_si128((const uint32_t *) position->x); + /* vertex y coords */ + verty = vec_load_si128((const uint32_t *) position->y); + + shufx = vec_perm (vertx, vertx, vshuf_mask.m128i); + shufy = vec_perm (verty, verty, vshuf_mask.m128i); + + dcdx = vec_sub_epi32(verty, shufy); + dcdy = vec_sub_epi32(vertx, shufx); + + dcdx_neg_mask = vec_srai_epi32(dcdx, 31); + dcdx_zero_mask = vec_cmpeq_epi32(dcdx, zero); + dcdy_neg_mask = vec_srai_epi32(dcdy, 31); + + bottom_edge = (setup->bottom_edge_rule == 0) ? ~0 : 0; + top_left_flag = (__m128i) vec_splats(bottom_edge); + + c_inc_mask = vec_or(dcdx_neg_mask, + vec_and(dcdx_zero_mask, + vec_xor(dcdy_neg_mask, + top_left_flag))); + + c_inc = vec_srli_epi32(c_inc_mask, 31); + + c = vec_sub_epi32(vec_mullo_epi32(dcdx, vertx), + vec_mullo_epi32(dcdy, verty)); + + c = vec_add_epi32(c, c_inc); + + /* Scale up to match c: + */ + dcdx = vec_slli_epi32(dcdx, FIXED_ORDER); + dcdy = vec_slli_epi32(dcdy, FIXED_ORDER); + + /* Calculate trivial reject values: + */ + eo = vec_sub_epi32(vec_andnot_si128(dcdy_neg_mask, dcdy), + vec_and(dcdx_neg_mask, dcdx)); + + /* ei = _mm_sub_epi32(_mm_sub_epi32(dcdy, dcdx), eo); */ + /* Pointless transpose which gets undone immediately in * rasterization: */ transpose4_epi32(&c, &dcdx, &dcdy, &eo, &p0, &p1, &p2, &unused); - _mm_store_si128((__m128i *)&plane[0], p0); - _mm_store_si128((__m128i *)&plane[1], p1); - _mm_store_si128((__m128i *)&plane[2], p2); - } -#else +#define STORE_PLANE(plane, vec) do { \ + vec_store_si128((uint32_t *)&temp_vec, vec); \ + plane.c = (int64_t)temp_vec[0]; \ + plane.dcdx = temp_vec[1]; \ + plane.dcdy = temp_vec[2]; \ + plane.eo = temp_vec[3]; \ + } while(0) + + STORE_PLANE(plane[0], p0); + STORE_PLANE(plane[1], p1); + STORE_PLANE(plane[2], p2); +#undef STORE_PLANE + } else +#endif { int i; - plane[0].dcdy = x[0] - x[1]; - plane[1].dcdy = x[1] - x[2]; - plane[2].dcdy = x[2] - x[0]; - plane[0].dcdx = y[0] - y[1]; - plane[1].dcdx = y[1] - y[2]; - plane[2].dcdx = y[2] - y[0]; + plane[0].dcdy = position->dx01; + plane[1].dcdy = position->x[1] - position->x[2]; + plane[2].dcdy = position->dx20; + plane[0].dcdx = position->dy01; + plane[1].dcdx = position->y[1] - position->y[2]; + plane[2].dcdx = position->dy20; for (i = 0; i < 3; i++) { - /* half-edge constants, will be interated over the whole render + /* half-edge constants, will be iterated over the whole render * target. */ - plane[i].c = plane[i].dcdx * x[i] - plane[i].dcdy * y[i]; - - /* correct for top-left vs. bottom-left fill convention. - * - * note that we're overloading gl_rasterization_rules to mean - * both (0.5,0.5) pixel centers *and* bottom-left filling - * convention. - * - * GL actually has a top-left filling convention, but GL's - * notion of "top" differs from gallium's... - * - * Also, sometimes (in FBO cases) GL will render upside down - * to its usual method, in which case it will probably want - * to use the opposite, top-left convention. - */ + plane[i].c = IMUL64(plane[i].dcdx, position->x[i]) - + IMUL64(plane[i].dcdy, position->y[i]); + + /* correct for top-left vs. bottom-left fill convention. + */ if (plane[i].dcdx < 0) { /* both fill conventions want this - adjust for left edges */ - plane[i].c++; + plane[i].c++; } else if (plane[i].dcdx == 0) { - if (setup->pixel_offset == 0) { + if (setup->bottom_edge_rule == 0){ /* correct for top-left fill convention: */ if (plane[i].dcdy > 0) plane[i].c++; @@ -449,8 +622,12 @@ do_triangle_ccw(struct lp_setup_context *setup, } } - plane[i].dcdx *= FIXED_ONE; - plane[i].dcdy *= FIXED_ONE; + /* Scale up to match c: + */ + assert((plane[i].dcdx << FIXED_ORDER) >> FIXED_ORDER == plane[i].dcdx); + assert((plane[i].dcdy << FIXED_ORDER) >> FIXED_ORDER == plane[i].dcdy); + plane[i].dcdx <<= FIXED_ORDER; + plane[i].dcdy <<= FIXED_ORDER; /* find trivial reject offsets for each edge for a single-pixel * sized block. These will be scaled up at each recursive level to @@ -462,22 +639,21 @@ do_triangle_ccw(struct lp_setup_context *setup, if (plane[i].dcdy > 0) plane[i].eo += plane[i].dcdy; } } -#endif if (0) { - debug_printf("p0: %08x/%08x/%08x/%08x\n", + debug_printf("p0: %"PRIx64"/%08x/%08x/%08x\n", plane[0].c, plane[0].dcdx, plane[0].dcdy, plane[0].eo); - - debug_printf("p1: %08x/%08x/%08x/%08x\n", + + debug_printf("p1: %"PRIx64"/%08x/%08x/%08x\n", plane[1].c, plane[1].dcdx, plane[1].dcdy, plane[1].eo); - - debug_printf("p0: %08x/%08x/%08x/%08x\n", + + debug_printf("p2: %"PRIx64"/%08x/%08x/%08x\n", plane[2].c, plane[2].dcdx, plane[2].dcdy, @@ -502,32 +678,46 @@ do_triangle_ccw(struct lp_setup_context *setup, * Note that otherwise, the scissor planes only vary in 'C' value, * and even then only on state-changes. Could alternatively store * these planes elsewhere. + * (Or only store the c value together with a bit indicating which + * scissor edge this is, so rasterization would treat them differently + * (easier to evaluate) to ordinary planes.) */ - if (nr_planes == 7) { - const struct u_rect *scissor = &setup->scissor; - - plane[3].dcdx = -1; - plane[3].dcdy = 0; - plane[3].c = 1-scissor->x0; - plane[3].eo = 1; - - plane[4].dcdx = 1; - plane[4].dcdy = 0; - plane[4].c = scissor->x1+1; - plane[4].eo = 0; - - plane[5].dcdx = 0; - plane[5].dcdy = 1; - plane[5].c = 1-scissor->y0; - plane[5].eo = 1; - - plane[6].dcdx = 0; - plane[6].dcdy = -1; - plane[6].c = scissor->y1+1; - plane[6].eo = 0; + if (nr_planes > 3) { + /* why not just use draw_regions */ + struct lp_rast_plane *plane_s = &plane[3]; + + if (s_planes[0]) { + plane_s->dcdx = ~0U << 8; + plane_s->dcdy = 0; + plane_s->c = (1-scissor->x0) << 8; + plane_s->eo = 1 << 8; + plane_s++; + } + if (s_planes[1]) { + plane_s->dcdx = 1 << 8; + plane_s->dcdy = 0; + plane_s->c = (scissor->x1+1) << 8; + plane_s->eo = 0 << 8; + plane_s++; + } + if (s_planes[2]) { + plane_s->dcdx = 0; + plane_s->dcdy = 1 << 8; + plane_s->c = (1-scissor->y0) << 8; + plane_s->eo = 1 << 8; + plane_s++; + } + if (s_planes[3]) { + plane_s->dcdx = 0; + plane_s->dcdy = ~0U << 8; + plane_s->c = (scissor->y1+1) << 8; + plane_s->eo = 0; + plane_s++; + } + assert(plane_s == &plane[nr_planes]); } - return lp_setup_bin_triangle( setup, tri, &bbox, nr_planes ); + return lp_setup_bin_triangle(setup, tri, &bbox, &bboxpos, nr_planes, viewport_index); } /* @@ -535,16 +725,17 @@ do_triangle_ccw(struct lp_setup_context *setup, * * Undefined if no bit set exists, so code should check against 0 first. */ -static INLINE uint32_t +static inline uint32_t floor_pot(uint32_t n) { -#if defined(PIPE_CC_GCC) && defined(PIPE_ARCH_X86) +#if defined(PIPE_CC_GCC) && (defined(PIPE_ARCH_X86) || defined(PIPE_ARCH_X86_64)) if (n == 0) return 0; __asm__("bsr %1,%0" : "=r" (n) - : "rm" (n)); + : "rm" (n) + : "cc"); return 1 << n; #else n |= (n >> 1); @@ -558,15 +749,16 @@ floor_pot(uint32_t n) boolean -lp_setup_bin_triangle( struct lp_setup_context *setup, - struct lp_rast_triangle *tri, - const struct u_rect *bbox, - int nr_planes ) +lp_setup_bin_triangle(struct lp_setup_context *setup, + struct lp_rast_triangle *tri, + const struct u_rect *bboxorig, + const struct u_rect *bbox, + int nr_planes, + unsigned viewport_index) { struct lp_scene *scene = setup->scene; struct u_rect trimmed_box = *bbox; int i; - /* What is the largest power-of-two boundary this triangle crosses: */ int dx = floor_pot((bbox->x0 ^ bbox->x1) | @@ -575,15 +767,27 @@ lp_setup_bin_triangle( struct lp_setup_context *setup, /* The largest dimension of the rasterized area of the triangle * (aligned to a 4x4 grid), rounded down to the nearest power of two: */ - int sz = floor_pot((bbox->x1 - (bbox->x0 & ~3)) | - (bbox->y1 - (bbox->y0 & ~3))); + int max_sz = ((bbox->x1 - (bbox->x0 & ~3)) | + (bbox->y1 - (bbox->y0 & ~3))); + int sz = floor_pot(max_sz); + + /* + * NOTE: It is important to use the original bounding box + * which might contain negative values here, because if the + * plane math may overflow or not with the 32bit rasterization + * functions depends on the original extent of the triangle. + */ + int max_szorig = ((bboxorig->x1 - (bboxorig->x0 & ~3)) | + (bboxorig->y1 - (bboxorig->y0 & ~3))); + boolean use_32bits = max_szorig <= MAX_FIXED_LENGTH32; /* Now apply scissor, etc to the bounding box. Could do this * earlier, but it confuses the logic for tri-16 and would force * the rasterizer to also respect scissor, etc, just for the rare * cases where a small triangle extends beyond the scissor. */ - u_rect_find_intersection(&setup->draw_region, &trimmed_box); + u_rect_find_intersection(&setup->draw_regions[viewport_index], + &trimmed_box); /* Determine which tile(s) intersect the triangle's bounding box */ @@ -606,6 +810,8 @@ lp_setup_bin_triangle( struct lp_setup_context *setup, assert(py + 4 <= TILE_SIZE); return lp_scene_bin_cmd_with_state( scene, ix0, iy0, setup->fs.stored, + use_32bits ? + LP_RAST_OP_TRIANGLE_32_3_4 : LP_RAST_OP_TRIANGLE_3_4, lp_rast_arg_triangle_contained(tri, px, py) ); } @@ -628,6 +834,8 @@ lp_setup_bin_triangle( struct lp_setup_context *setup, return lp_scene_bin_cmd_with_state( scene, ix0, iy0, setup->fs.stored, + use_32bits ? + LP_RAST_OP_TRIANGLE_32_3_16 : LP_RAST_OP_TRIANGLE_3_16, lp_rast_arg_triangle_contained(tri, px, py) ); } @@ -642,6 +850,8 @@ lp_setup_bin_triangle( struct lp_setup_context *setup, return lp_scene_bin_cmd_with_state(scene, ix0, iy0, setup->fs.stored, + use_32bits ? + LP_RAST_OP_TRIANGLE_32_4_16 : LP_RAST_OP_TRIANGLE_4_16, lp_rast_arg_triangle_contained(tri, px, py)); } @@ -649,19 +859,20 @@ lp_setup_bin_triangle( struct lp_setup_context *setup, /* Triangle is contained in a single tile: */ - return lp_scene_bin_cmd_with_state( scene, ix0, iy0, setup->fs.stored, - lp_rast_tri_tab[nr_planes], - lp_rast_arg_triangle(tri, (1<fs.stored, + use_32bits ? lp_rast_32_tri_tab[nr_planes] : lp_rast_tri_tab[nr_planes], + lp_rast_arg_triangle(tri, (1<> 31); - partial |= (planepartial >> 31) & (1<> 63); + partial |= ((int) (planepartial >> 63)) & (1<fs.stored, - lp_rast_tri_tab[count], + use_32bits ? + lp_rast_32_tri_tab[count] : + lp_rast_tri_tab[count], lp_rast_arg_triangle(tri, partial) )) goto fail; @@ -739,14 +952,12 @@ lp_setup_bin_triangle( struct lp_setup_context *setup, goto fail; } - /* Iterate cx values across the region: - */ + /* Iterate cx values across the region: */ for (i = 0; i < nr_planes; i++) cx[i] += xstep[i]; - } - - /* Iterate c values down the region: - */ + } + + /* Iterate c values down the region: */ for (i = 0; i < nr_planes; i++) c[i] += ystep[i]; } @@ -768,69 +979,209 @@ fail: * Try to draw the triangle, restart the scene on failure. */ static void retry_triangle_ccw( struct lp_setup_context *setup, + struct fixed_position* position, const float (*v0)[4], const float (*v1)[4], const float (*v2)[4], boolean front) { - if (!do_triangle_ccw( setup, v0, v1, v2, front )) + if (!do_triangle_ccw( setup, position, v0, v1, v2, front )) { if (!lp_setup_flush_and_restart(setup)) return; - if (!do_triangle_ccw( setup, v0, v1, v2, front )) + if (!do_triangle_ccw( setup, position, v0, v1, v2, front )) return; } } -static INLINE float -calc_area(const float (*v0)[4], - const float (*v1)[4], - const float (*v2)[4]) +/** + * Calculate fixed position data for a triangle + * It is unfortunate we need to do that here (as we need area + * calculated in fixed point), as there's quite some code duplication + * to what is done in the jit setup prog. + */ +static inline void +calc_fixed_position(struct lp_setup_context *setup, + struct fixed_position* position, + const float (*v0)[4], + const float (*v1)[4], + const float (*v2)[4]) { - float dx01 = v0[0][0] - v1[0][0]; - float dy01 = v0[0][1] - v1[0][1]; - float dx20 = v2[0][0] - v0[0][0]; - float dy20 = v2[0][1] - v0[0][1]; - return dx01 * dy20 - dx20 * dy01; + /* + * The rounding may not be quite the same with PIPE_ARCH_SSE + * (util_iround right now only does nearest/even on x87, + * otherwise nearest/away-from-zero). + * Both should be acceptable, I think. + */ +#if defined(PIPE_ARCH_SSE) + __m128 v0r, v1r; + __m128 vxy0xy2, vxy1xy0; + __m128i vxy0xy2i, vxy1xy0i; + __m128i dxdy0120, x0x2y0y2, x1x0y1y0, x0120, y0120; + __m128 pix_offset = _mm_set1_ps(setup->pixel_offset); + __m128 fixed_one = _mm_set1_ps((float)FIXED_ONE); + v0r = _mm_castpd_ps(_mm_load_sd((double *)v0[0])); + vxy0xy2 = _mm_loadh_pi(v0r, (__m64 *)v2[0]); + v1r = _mm_castpd_ps(_mm_load_sd((double *)v1[0])); + vxy1xy0 = _mm_movelh_ps(v1r, vxy0xy2); + vxy0xy2 = _mm_sub_ps(vxy0xy2, pix_offset); + vxy1xy0 = _mm_sub_ps(vxy1xy0, pix_offset); + vxy0xy2 = _mm_mul_ps(vxy0xy2, fixed_one); + vxy1xy0 = _mm_mul_ps(vxy1xy0, fixed_one); + vxy0xy2i = _mm_cvtps_epi32(vxy0xy2); + vxy1xy0i = _mm_cvtps_epi32(vxy1xy0); + dxdy0120 = _mm_sub_epi32(vxy0xy2i, vxy1xy0i); + _mm_store_si128((__m128i *)&position->dx01, dxdy0120); + /* + * For the mul, would need some more shuffles, plus emulation + * for the signed mul (without sse41), so don't bother. + */ + x0x2y0y2 = _mm_shuffle_epi32(vxy0xy2i, _MM_SHUFFLE(3,1,2,0)); + x1x0y1y0 = _mm_shuffle_epi32(vxy1xy0i, _MM_SHUFFLE(3,1,2,0)); + x0120 = _mm_unpacklo_epi32(x0x2y0y2, x1x0y1y0); + y0120 = _mm_unpackhi_epi32(x0x2y0y2, x1x0y1y0); + _mm_store_si128((__m128i *)&position->x[0], x0120); + _mm_store_si128((__m128i *)&position->y[0], y0120); + +#else + position->x[0] = subpixel_snap(v0[0][0] - setup->pixel_offset); + position->x[1] = subpixel_snap(v1[0][0] - setup->pixel_offset); + position->x[2] = subpixel_snap(v2[0][0] - setup->pixel_offset); + position->x[3] = 0; // should be unused + + position->y[0] = subpixel_snap(v0[0][1] - setup->pixel_offset); + position->y[1] = subpixel_snap(v1[0][1] - setup->pixel_offset); + position->y[2] = subpixel_snap(v2[0][1] - setup->pixel_offset); + position->y[3] = 0; // should be unused + + position->dx01 = position->x[0] - position->x[1]; + position->dy01 = position->y[0] - position->y[1]; + + position->dx20 = position->x[2] - position->x[0]; + position->dy20 = position->y[2] - position->y[0]; +#endif + + position->area = IMUL64(position->dx01, position->dy20) - + IMUL64(position->dx20, position->dy01); +} + + +/** + * Rotate a triangle, flipping its clockwise direction, + * Swaps values for xy[0] and xy[1] + */ +static inline void +rotate_fixed_position_01( struct fixed_position* position ) +{ + int x, y; + + x = position->x[1]; + y = position->y[1]; + position->x[1] = position->x[0]; + position->y[1] = position->y[0]; + position->x[0] = x; + position->y[0] = y; + + position->dx01 = -position->dx01; + position->dy01 = -position->dy01; + position->dx20 = position->x[2] - position->x[0]; + position->dy20 = position->y[2] - position->y[0]; + + position->area = -position->area; +} + + +/** + * Rotate a triangle, flipping its clockwise direction, + * Swaps values for xy[1] and xy[2] + */ +static inline void +rotate_fixed_position_12( struct fixed_position* position ) +{ + int x, y; + + x = position->x[2]; + y = position->y[2]; + position->x[2] = position->x[1]; + position->y[2] = position->y[1]; + position->x[1] = x; + position->y[1] = y; + + x = position->dx01; + y = position->dy01; + position->dx01 = -position->dx20; + position->dy01 = -position->dy20; + position->dx20 = -x; + position->dy20 = -y; + + position->area = -position->area; } /** * Draw triangle if it's CW, cull otherwise. */ -static void triangle_cw( struct lp_setup_context *setup, - const float (*v0)[4], - const float (*v1)[4], - const float (*v2)[4] ) +static void triangle_cw(struct lp_setup_context *setup, + const float (*v0)[4], + const float (*v1)[4], + const float (*v2)[4]) { - float area = calc_area(v0, v1, v2); + PIPE_ALIGN_VAR(16) struct fixed_position position; + struct llvmpipe_context *lp_context = (struct llvmpipe_context *)setup->pipe; - if (area < 0.0f) - retry_triangle_ccw(setup, v0, v2, v1, !setup->ccw_is_frontface); + if (lp_context->active_statistics_queries) { + lp_context->pipeline_statistics.c_primitives++; + } + + calc_fixed_position(setup, &position, v0, v1, v2); + + if (position.area < 0) { + if (setup->flatshade_first) { + rotate_fixed_position_12(&position); + retry_triangle_ccw(setup, &position, v0, v2, v1, !setup->ccw_is_frontface); + } else { + rotate_fixed_position_01(&position); + retry_triangle_ccw(setup, &position, v1, v0, v2, !setup->ccw_is_frontface); + } + } } -static void triangle_ccw( struct lp_setup_context *setup, - const float (*v0)[4], - const float (*v1)[4], - const float (*v2)[4]) +static void triangle_ccw(struct lp_setup_context *setup, + const float (*v0)[4], + const float (*v1)[4], + const float (*v2)[4]) { - float area = calc_area(v0, v1, v2); + PIPE_ALIGN_VAR(16) struct fixed_position position; + struct llvmpipe_context *lp_context = (struct llvmpipe_context *)setup->pipe; + + if (lp_context->active_statistics_queries) { + lp_context->pipeline_statistics.c_primitives++; + } - if (area > 0.0f) - retry_triangle_ccw(setup, v0, v1, v2, setup->ccw_is_frontface); + calc_fixed_position(setup, &position, v0, v1, v2); + + if (position.area > 0) + retry_triangle_ccw(setup, &position, v0, v1, v2, setup->ccw_is_frontface); } /** * Draw triangle whether it's CW or CCW. */ -static void triangle_both( struct lp_setup_context *setup, - const float (*v0)[4], - const float (*v1)[4], - const float (*v2)[4] ) +static void triangle_both(struct lp_setup_context *setup, + const float (*v0)[4], + const float (*v1)[4], + const float (*v2)[4]) { - float area = calc_area(v0, v1, v2); + PIPE_ALIGN_VAR(16) struct fixed_position position; + struct llvmpipe_context *lp_context = (struct llvmpipe_context *)setup->pipe; + + if (lp_context->active_statistics_queries) { + lp_context->pipeline_statistics.c_primitives++; + } + + calc_fixed_position(setup, &position, v0, v1, v2); if (0) { assert(!util_is_inf_or_nan(v0[0][0])); @@ -839,27 +1190,37 @@ static void triangle_both( struct lp_setup_context *setup, assert(!util_is_inf_or_nan(v1[0][1])); assert(!util_is_inf_or_nan(v2[0][0])); assert(!util_is_inf_or_nan(v2[0][1])); - assert(!util_is_inf_or_nan(area)); } - if (area > 0.0f) - retry_triangle_ccw( setup, v0, v1, v2, setup->ccw_is_frontface ); - else if (area < 0.0f) - retry_triangle_ccw( setup, v0, v2, v1, !setup->ccw_is_frontface ); + if (position.area > 0) + retry_triangle_ccw( setup, &position, v0, v1, v2, setup->ccw_is_frontface ); + else if (position.area < 0) { + if (setup->flatshade_first) { + rotate_fixed_position_12( &position ); + retry_triangle_ccw( setup, &position, v0, v2, v1, !setup->ccw_is_frontface ); + } else { + rotate_fixed_position_01( &position ); + retry_triangle_ccw( setup, &position, v1, v0, v2, !setup->ccw_is_frontface ); + } + } } -static void triangle_nop( struct lp_setup_context *setup, - const float (*v0)[4], - const float (*v1)[4], - const float (*v2)[4] ) +static void triangle_noop(struct lp_setup_context *setup, + const float (*v0)[4], + const float (*v1)[4], + const float (*v2)[4]) { } void -lp_setup_choose_triangle( struct lp_setup_context *setup ) +lp_setup_choose_triangle(struct lp_setup_context *setup) { + if (setup->rasterizer_discard) { + setup->triangle = triangle_noop; + return; + } switch (setup->cullmode) { case PIPE_FACE_NONE: setup->triangle = triangle_both; @@ -871,7 +1232,7 @@ lp_setup_choose_triangle( struct lp_setup_context *setup ) setup->triangle = setup->ccw_is_frontface ? triangle_cw : triangle_ccw; break; default: - setup->triangle = triangle_nop; + setup->triangle = triangle_noop; break; } }