X-Git-Url: https://git.libre-soc.org/?a=blobdiff_plain;f=src%2Fgallium%2Fwinsys%2Fdrm%2Fvmware%2Fcore%2Fvmwgfx_drm.h;h=89bbf17ce99ce9a0466ac4358f6ffb98be0e3c47;hb=b605f4ff11c894500f2d0273c5d4653ff413448d;hp=6705dd42897500ccb693895a83d6a5abd232f896;hpb=650e02003fbb5511ec758d993b7ec0a302ee2235;p=mesa.git

diff --git a/src/gallium/winsys/drm/vmware/core/vmwgfx_drm.h b/src/gallium/winsys/drm/vmware/core/vmwgfx_drm.h
index 6705dd42897..89bbf17ce99 100644
--- a/src/gallium/winsys/drm/vmware/core/vmwgfx_drm.h
+++ b/src/gallium/winsys/drm/vmware/core/vmwgfx_drm.h
@@ -45,20 +45,23 @@
 #define DRM_VMW_UNREF_DMABUF         10
 #define DRM_VMW_FIFO_DEBUG           11
 #define DRM_VMW_FENCE_WAIT           12
-
+#define DRM_VMW_OVERLAY              13
+#define DRM_VMW_CURSOR_BYPASS        14
 
 /*************************************************************************/
 /**
  * DRM_VMW_GET_PARAM - get device information.
  *
- * Currently we support only one parameter:
- *
  * DRM_VMW_PARAM_FIFO_OFFSET:
  * Offset to use to map the first page of the FIFO read-only.
  * The fifo is mapped using the mmap() system call on the drm device.
+ *
+ * DRM_VMW_PARAM_OVERLAY_IOCTL:
+ * Does the driver support the overlay ioctl.
  */
 
 #define DRM_VMW_PARAM_FIFO_OFFSET    0
+#define DRM_VMW_PARAM_OVERLAY_IOCTL  1
 
 /**
  * struct drm_vmw_getparam_arg
@@ -439,4 +442,99 @@ struct drm_vmw_fence_wait_arg {
 	int32_t pad64;
 };
 
+/*************************************************************************/
+/**
+ * DRM_VMW_OVERLAY - Control overlays.
+ *
+ * This IOCTL controls the overlay units of the svga device.
+ * The SVGA overlay units does not work like regular hardware units in
+ * that they do not automaticaly read back the contents of the given dma
+ * buffer. But instead only read back for each call to this ioctl, and
+ * at any point between this call being made and a following call that
+ * either changes the buffer or disables the stream.
+ */
+
+/**
+ * struct drm_vmw_rect
+ *
+ * Defines a rectangle. Used in the overlay ioctl to define
+ * source and destination rectangle.
+ */
+
+struct drm_vmw_rect {
+	int32_t x;
+	int32_t y;
+	uint32_t w;
+	uint32_t h;
+};
+
+/**
+ * struct drm_vmw_overlay_arg
+ *
+ * @stream_id: Stearm to control
+ * @enabled: If false all following arguments are ignored.
+ * @handle: Handle to buffer for getting data from.
+ * @format: Format of the overlay as understood by the host.
+ * @width: Width of the overlay.
+ * @height: Height of the overlay.
+ * @size: Size of the overlay in bytes.
+ * @pitch: Array of pitches, the two last are only used for YUV12 formats.
+ * @offset: Offset from start of dma buffer to overlay.
+ * @src: Source rect, must be within the defined area above.
+ * @dst: Destination rect, x and y may be negative.
+ *
+ * Argument to the DRM_VMW_OVERLAY Ioctl.
+ */
+
+struct drm_vmw_overlay_arg {
+	uint32_t stream_id;
+	uint32_t enabled;
+
+	uint32_t flags;
+	uint32_t color_key;
+
+	uint32_t handle;
+	uint32_t offset;
+	int32_t format;
+	uint32_t size;
+	uint32_t width;
+	uint32_t height;
+	uint32_t pitch[3];
+
+	uint32_t pad64;
+	struct drm_vmw_rect src;
+	struct drm_vmw_rect dst;
+};
+
+/*************************************************************************/
+/**
+ * DRM_VMW_CURSOR_BYPASS - Give extra information about cursor bypass.
+ *
+ */
+
+#define DRM_VMW_CURSOR_BYPASS_ALL    (1 << 0)
+#define DRM_VMW_CURSOR_BYPASS_FLAGS       (1)
+
+/**
+ * struct drm_vmw_cursor_bypass_arg
+ *
+ * @flags: Flags.
+ * @crtc_id: Crtc id, only used if DMR_CURSOR_BYPASS_ALL isn't passed.
+ * @xpos: X position of cursor.
+ * @ypos: Y position of cursor.
+ * @xhot: X hotspot.
+ * @yhot: Y hotspot.
+ *
+ * Argument to the DRM_VMW_CURSOR_BYPASS Ioctl.
+ */
+
+struct drm_vmw_cursor_bypass_arg {
+	uint32_t flags;
+	uint32_t crtc_id;
+	int32_t xpos;
+	int32_t ypos;
+	int32_t xhot;
+	int32_t yhot;
+};
+
 #endif