X-Git-Url: https://git.libre-soc.org/?a=blobdiff_plain;f=techlibs%2Fgreenpak4%2Fcells_sim.v;h=221bee694fa5b0e9c0c3742036b9074e068f789c;hb=ce78717e3601012e95cf786b87b281e55a3a8391;hp=c4e5a9de13e9a72a9f873efea55e1c487da70c82;hpb=85ee88b0ee13eb49bb255d7e66a62fce823c028a;p=yosys.git

diff --git a/techlibs/greenpak4/cells_sim.v b/techlibs/greenpak4/cells_sim.v
index c4e5a9de1..221bee694 100644
--- a/techlibs/greenpak4/cells_sim.v
+++ b/techlibs/greenpak4/cells_sim.v
@@ -1,325 +1,5 @@
-`timescale 1ns/1ps;
+`timescale 1ns/1ps
 
-module GP_2LUT(input IN0, IN1, output OUT);
-	parameter [3:0] INIT = 0;
-	assign OUT = INIT[{IN1, IN0}];
-endmodule
-
-module GP_3LUT(input IN0, IN1, IN2, output OUT);
-	parameter [7:0] INIT = 0;
-	assign OUT = INIT[{IN2, IN1, IN0}];
-endmodule
-
-module GP_4LUT(input IN0, IN1, IN2, IN3, output OUT);
-	parameter [15:0] INIT = 0;
-	assign OUT = INIT[{IN3, IN2, IN1, IN0}];
-endmodule
-
-module GP_ABUF(input wire IN, output wire OUT);
-	
-	assign OUT = IN;
-	
-	//cannot simulate mixed signal IP
-	
-endmodule
-
-module GP_ACMP(input wire PWREN, input wire VIN, input wire VREF, output reg OUT);
-
-	parameter BANDWIDTH = "HIGH";
-	parameter VIN_ATTEN = 1;
-	parameter VIN_ISRC_EN = 0;
-	parameter HYSTERESIS = 0;
-	
-	initial OUT = 0;
-	
-	//cannot simulate mixed signal IP
-
-endmodule
-
-module GP_BANDGAP(output reg OK, output reg VOUT);
-	parameter AUTO_PWRDN = 1;
-	parameter CHOPPER_EN = 1;
-	parameter OUT_DELAY = 100;
-	
-	//cannot simulate mixed signal IP
-	
-endmodule
-
-module GP_COUNT8(input CLK, input wire RST, output reg OUT);
-
-	parameter RESET_MODE 	= "RISING";	
-	
-	parameter COUNT_TO		= 8'h1;
-	parameter CLKIN_DIVIDE	= 1;
-	
-	//more complex hard IP blocks are not supported for simulation yet
-	
-	reg[7:0] count = COUNT_TO;
-	
-	//Combinatorially output whenever we wrap low
-	always @(*) begin
-		OUT <= (count == 8'h0);
-	end
-	
-	//POR or SYSRST reset value is COUNT_TO. Datasheet is unclear but conversations w/ Silego confirm.
-	//Runtime reset value is clearly 0 except in count/FSM cells where it's configurable but we leave at 0 for now.
-	//Datasheet seems to indicate that reset is asynchronous, but for now we model as sync due to Yosys issues...
-	always @(posedge CLK) begin
-		
-		count		<= count - 1'd1;
-		
-		if(count == 0)
-			count	<= COUNT_TO;
-			
-		/*
-		if((RESET_MODE == "RISING") && RST)
-			count	<= 0;
-		if((RESET_MODE == "FALLING") && !RST)
-			count	<= 0;
-		if((RESET_MODE == "BOTH") && RST)
-			count	<= 0;
-		*/			
-	end
-
-endmodule
-
-module GP_COUNT14(input CLK, input wire RST, output reg OUT);
-
-	parameter RESET_MODE 	= "RISING";	
-	
-	parameter COUNT_TO		= 14'h1;
-	parameter CLKIN_DIVIDE	= 1;
-	
-	//more complex hard IP blocks are not supported for simulation yet
-
-endmodule
-
-module GP_DFF(input D, CLK, output reg Q);
-	parameter [0:0] INIT = 1'bx;
-	initial Q = INIT;
-	always @(posedge CLK) begin
-		Q <= D;
-	end
-endmodule
-
-module GP_DFFR(input D, CLK, nRST, output reg Q);
-	parameter [0:0] INIT = 1'bx;
-	initial Q = INIT;
-	always @(posedge CLK, negedge nRST) begin
-		if (!nRST)
-			Q <= 1'b0;
-		else
-			Q <= D;
-	end
-endmodule
-
-module GP_DFFS(input D, CLK, nSET, output reg Q);
-	parameter [0:0] INIT = 1'bx;
-	initial Q = INIT;
-	always @(posedge CLK, negedge nSET) begin
-		if (!nSET)
-			Q <= 1'b1;
-		else
-			Q <= D;
-	end
-endmodule
-
-module GP_DFFSR(input D, CLK, nSR, output reg Q);
-	parameter [0:0] INIT = 1'bx;
-	parameter [0:0] SRMODE = 1'bx;
-	initial Q = INIT;
-	always @(posedge CLK, negedge nSR) begin
-		if (!nSR)
-			Q <= SRMODE;
-		else
-			Q <= D;
-	end
-endmodule
-
-module GP_IBUF(input IN, output OUT);
-	assign OUT = IN;
-endmodule
-
-module GP_IOBUF(input IN, input OE, output OUT, inout IO);
-	assign OUT = IO;
-	assign IO = OE ? IN : 1'bz;
-endmodule
-
-module GP_INV(input IN, output OUT);
-	assign OUT = ~IN;
-endmodule
-
-module GP_LFOSC(input PWRDN, output reg CLKOUT);
-	
-	parameter PWRDN_EN = 0;
-	parameter AUTO_PWRDN = 0;
-	parameter OUT_DIV = 1;
-	
-	initial CLKOUT = 0;
-	
-	//auto powerdown not implemented for simulation
-	//output dividers not implemented for simulation
-	
-	always begin
-		if(PWRDN)
-			CLKOUT = 0;
-		else begin
-			//half period of 1730 Hz
-			#289017;
-			CLKOUT = ~CLKOUT;
-		end
-	end
-	
-endmodule
-
-module GP_OBUF(input IN, output OUT);
-	assign OUT = IN;
-endmodule
-
-module GP_OBUFT(input IN, input OE, output OUT);
-	assign OUT = OE ? IN : 1'bz;
-endmodule
-
-module GP_PGA(input wire VIN_P, input wire VIN_N, input wire VIN_SEL, output reg VOUT);
-
-	parameter GAIN = 1;
-	parameter INPUT_MODE = "SINGLE";
-
-	initial VOUT = 0;
-
-	//cannot simulate mixed signal IP
-
-endmodule
-
-module GP_POR(output reg RST_DONE);
-	parameter POR_TIME = 500;
-	
-	initial begin
-		RST_DONE = 0;
-		
-		if(POR_TIME == 4)
-			#4000;
-		else if(POR_TIME == 500)
-			#500000;
-		else begin
-			$display("ERROR: bad POR_TIME for GP_POR cell");
-			$finish;
-		end
-		
-		RST_DONE = 1;
-		
-	end
-	
-endmodule
-
-module GP_RCOSC(input PWRDN, output reg CLKOUT_PREDIV, output reg CLKOUT_FABRIC);
-	
-	parameter PWRDN_EN = 0;
-	parameter AUTO_PWRDN = 0;
-	parameter PRE_DIV = 1;
-	parameter FABRIC_DIV = 1;
-	parameter OSC_FREQ = "25k";
-	
-	initial CLKOUT_PREDIV = 0;
-	initial CLKOUT_FABRIC = 0;
-	
-	//output dividers not implemented for simulation
-	//auto powerdown not implemented for simulation
-	
-	always begin
-		if(PWRDN) begin
-			CLKOUT_PREDIV = 0;
-			CLKOUT_FABRIC = 0;
-		end
-		else begin
-		
-			if(OSC_FREQ == "25k") begin
-				//half period of 25 kHz
-				#20000;
-			end
-			
-			else begin
-				//half period of 2 MHz
-				#250;
-			end
-			
-			CLKOUT_PREDIV = ~CLKOUT_PREDIV;
-			CLKOUT_FABRIC = ~CLKOUT_FABRIC;
-		end
-	end
-	
-endmodule
-
-module GP_RINGOSC(input PWRDN, output reg CLKOUT_PREDIV, output reg CLKOUT_FABRIC);
-	
-	parameter PWRDN_EN = 0;
-	parameter AUTO_PWRDN = 0;
-	parameter PRE_DIV = 1;
-	parameter FABRIC_DIV = 1;
-	
-	initial CLKOUT_PREDIV = 0;
-	initial CLKOUT_FABRIC = 0;
-	
-	//output dividers not implemented for simulation
-	//auto powerdown not implemented for simulation
-	
-	always begin
-		if(PWRDN) begin
-			CLKOUT_PREDIV = 0;
-			CLKOUT_FABRIC = 0;
-		end
-		else begin
-			//half period of 27 MHz
-			#18.518;
-			CLKOUT_PREDIV = ~CLKOUT_PREDIV;
-			CLKOUT_FABRIC = ~CLKOUT_FABRIC;
-		end
-	end
-	
-endmodule
-
-module GP_SHREG(input nRST, input CLK, input IN, output OUTA, output OUTB);
-
-	parameter OUTA_TAP = 1;
-	parameter OUTA_INVERT = 0;
-	parameter OUTB_TAP = 1;
-	
-	reg[15:0] shreg = 0;
-	
-	always @(posedge clk, negedge nRST) begin
-		
-		if(!nRST)
-			shreg = 0;
-		
-		else
-			shreg <= {shreg[14:0], IN};
-		
-	end
-	
-	assign OUTA = (OUTA_INVERT) ? ~shreg[OUTA_TAP - 1] : shreg[OUTA_TAP - 1];
-	assign OUTB = shreg[OUTB_TAP - 1];
-
-endmodule
-
-//keep constraint needed to prevent optimization since we have no outputs
-(* keep *)
-module GP_SYSRESET(input RST);
-	parameter RESET_MODE = "RISING";
-	
-	//cannot simulate whole system reset
-	
-endmodule
-
-module GP_VDD(output OUT);
-       assign OUT = 1;
-endmodule
-
-module GP_VREF(input VIN, output reg VOUT);
-	parameter VIN_DIV = 1;
-	parameter VREF = 0;
-	//cannot simulate mixed signal IP
-endmodule
-
-module GP_VSS(output OUT);
-       assign OUT = 0;
-endmodule
+`include "cells_sim_ams.v"
+`include "cells_sim_digital.v"
+`include "cells_sim_wip.v"