X-Git-Url: https://git.libre-soc.org/?a=blobdiff_plain;f=util%2Frundiff;h=c34bb53a3fc1e9171b16bfae5630ff5549c321d4;hb=466c3873184a0112de3f656d4a99eb80372ea513;hp=064e7e136cdd51855cbae049cb7631a7e00ebac4;hpb=782f18218c3343aa828f67fe5440d5237968170d;p=gem5.git diff --git a/util/rundiff b/util/rundiff index 064e7e136..c34bb53a3 100755 --- a/util/rundiff +++ b/util/rundiff @@ -1,511 +1,313 @@ -#!/usr/bin/perl +#! /usr/bin/env perl -# Copyright (c) 2001 Nathan L. Binkert +# Copyright (c) 2003 The Regents of The University of Michigan # All rights reserved. # -# Permission to redistribute, use, copy, and modify this software -# without fee is hereby granted, provided that the following -# conditions are met: +# Redistribution and use in source and binary forms, with or without +# modification, are permitted provided that the following conditions are +# met: redistributions of source code must retain the above copyright +# notice, this list of conditions and the following disclaimer; +# redistributions in binary form must reproduce the above copyright +# notice, this list of conditions and the following disclaimer in the +# documentation and/or other materials provided with the distribution; +# neither the name of the copyright holders nor the names of its +# contributors may be used to endorse or promote products derived from +# this software without specific prior written permission. # -# 1. This entire notice is included in all source code copies of any -# software which is or includes a copy or modification of this -# software. -# 2. The name of the author may not be used to endorse or promote -# products derived from this software without specific prior -# written permission. +# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS +# "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT +# LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR +# A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT +# OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, +# SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT +# LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, +# DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY +# THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT +# (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE +# OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. # -# THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS -# OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED -# WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE -# ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY -# DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL -# DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE -# GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS -# INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, -# WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING -# NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS -# SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. -# - -use Algorithm::Diff qw(diff); -use vars qw ($opt_C $opt_c $opt_u $opt_U); - -$opt_u = ""; -$opt_c = undef; +# Authors: Nathan Binkert +# Steve Reinhardt -$diffsize = 2000; -# After we've read up to a certain point in each file, the number of items -# we've read from each file will differ by $FLD (could be 0) -my $File_Length_Difference = 0; -my $Context_Lines = 9; +# Diff two streams. +# +# Unlike regular diff, this script does not read in the entire input +# before doing a diff, so it can be used on lengthy outputs piped from +# other programs (e.g., M5 traces). The best way to do this is to +# take advantage of the power of Perl's open function, which will +# automatically fork a subprocess if the last character in the +# "filename" is a pipe (|). Thus to compare the instruction traces +# from two versions of m5 (m5a and m5b), you can do this: +# +# rundiff 'm5a --traceflags=InstExec |' 'm5b --traceflags=InstExec |' +# -$progname = $0; -if (scalar(@ARGV) != 2) { - usage(); -} +use strict; -my ($filename1, $filename2); -($filename1, $start1) = parse_filearg($ARGV[0]); -($filename2, $start2) = parse_filearg($ARGV[1]); +use Getopt::Std; -if ($filename1 eq "-" && $filename2 eq "-") { - die "Only one of the inputs may be standard in\n"; -} +# +# Options: +# -c : print n lines of context before & after changes +# -l : use n lines of lookahead +# -x : use "complex" diff from Algorithm::Diff (see below) +# +our ($opt_c, $opt_l, $opt_x); +getopts('c:l:x'); -my ($file1, $file2); -if ($filename1 eq "-") { - $file1 = STDIN; -} else { - open(FILE1, $filename1) || die "can't open $file1: $!\n"; - $file1 = FILE1; -} +# +# For the highest-quality (minimal) diffs, we can use the +# Algorithm::Diff package. By default, a built-in, simple, and +# generally quite adequate algorithm will be used. If you have +# Algorithm::Diff installed on your system, and don't mind having the +# script go slower (like 3-4x slower, based on informal observation), +# then specify '-x' on the command line to use it. +my $use_complexdiff = defined($opt_x); + +if ($use_complexdiff) { + # Don't use 'use', as that's a compile-time option and will fail + # on systems that don't have Algorithm::Diff installed even if + # $use_complexdiff is false. 'require' is evaluated at runtime, + # so it's OK. + require Algorithm::Diff; + import Algorithm::Diff qw(traverse_sequences); +}; + +my $lookahead_lines = $opt_l || 200; + +# in theory you could have different amounts of context before and +# after a diff, but until someone needs that there's only one arg to +# set both. +my $precontext_lines = $opt_c || 3; +my $postcontext_lines = $precontext_lines; + +my $file1 = $ARGV[0]; +my $file2 = $ARGV[1]; + +die "Need two args." if (!(defined($file1) && defined($file2))); + +my ($fh1, $fh2); +open($fh1, $file1) or die "Can't open $file1"; +open($fh2, $file2) or die "Can't open $file2"; + +# print files to output so we know which is which +print "-$file1\n"; +print "+$file2\n"; + +# buffer of matching lines for pre-diff context +my @precontext = (); +# number of post-diff matching lines remaining to print +my $postcontext = 0; + +# lookahead buffers for $file1 and $file2 respectively +my @lines1 = (); +my @lines2 = (); + +# Next line number available to print from each file. Generally this +# corresponds to the oldest line in @precontext, or the oldest line in +# @lines1 and @lines2 if @precontext is empty. +my $lineno1 = 1; +my $lineno2 = 1; + +# Fill a lookahead buffer to $lookahead_lines lines (or until EOF). +sub fill +{ + my ($fh, $array) = @_; -if ($filename2 eq "-") { - $file2 = STDIN; -} else { - open(FILE2, $filename2) || die "can't open $file2: $!\n"; - $file2 = FILE2; + while (@$array < $lookahead_lines) { + my $line = <$fh>; + last if (!defined($line)); + push @$array, $line; + } } -my $file_offset1 = ffw($file1, $start1); -my $file_offset2 = ffw($file2, $start2); - -$skip_first = 0; -my (@buf1, @buf2, @printbuf1, @printbuf2); - -$Compare_Ahead = 0; - -while (!eof($file1) && !eof($file2)) { - my $line1 = <$file1>; chomp $line1; - my $line2 = <$file2>; chomp $line2; - my $printline1 = $line1; - my $printline2 = $line2; - - push @buf1, $line1; - push @buf2, $line2; - push @printbuf1, $printline1; - push @printbuf2, $printline2; - -# while ($Compare_Ahead < $Context_Lines) { -# $line1 = @buf1[$Compare_Ahead]; -# $line2 = @buf2[$Compare_Ahead]; -# $line2 =~ s/ *--.*$//; -# if ($line1 ne $line2) { last; } -# ++$Compare_Ahead; -# } - - $line1 = @buf1[$Compare_Ahead]; - $line2 = @buf2[$Compare_Ahead]; - $line2 =~ s/ *--.*$//; - - if ($line1 ne $line2) { - while (!eof($file1) && scalar(@buf1) < $diffsize) { - $line = <$file1>; chomp $line; - my $printline = $line; +# Print and delete n lines from front of given array with given prefix. +sub printlines +{ + my ($array, $n, $prefix) = @_; - push @printbuf1, $printline; - push @buf1, $line; - } - - while (!eof($file2) && scalar(@buf2) < $diffsize) { - $line = <$file2>; chomp $line; - my $printline = $line; -# $line =~ s/ *--.*$//; - - push @printbuf2, $printline; - push @buf2, $line; + while ($n--) { + my $line = shift @$array; + last if (!defined($line)); + print $prefix, $line; } +} - my $diffs = diff(\@buf1, \@buf2); - - next unless @$diffs; - - my @hunklist; - my ($hunk,$oldhunk); - # Loop over hunks. If a hunk overlaps with the last hunk, join them. - # Otherwise, print out the old one. - foreach my $piece (@$diffs) { - $hunk = new Hunk ($piece, $Context_Lines, scalar(@buf1)); - next unless $oldhunk; - - if ($hunk->does_overlap($oldhunk)) { - $hunk->prepend_hunk($oldhunk); - } else { - push @hunklist, $oldhunk; - } - } continue { - $oldhunk = $hunk; - } - - my $change = 0; - while (scalar(@hunklist) && !$change) { - $hunk = pop @hunklist; - $change = $hunk->{"change"}; - } - push @hunklist, $hunk; - $last_start1 = $hunk->{"start1"}; - $last_start2 = $hunk->{"start2"}; - $last_end1 = $hunk->{"end1"}; - $last_end2 = $hunk->{"end2"}; - - while (scalar(@hunklist)) { - $hunk = shift @hunklist; -# $hunk->output_diff(\@buf1, \@buf2); - $hunk->output_diff(\@printbuf1, \@printbuf2); +# Print a difference region where n1 lines of file1 were replaced by +# n2 lines of file2 (where either n1 or n2 could be zero). +sub printdiff +{ + my ($n1, $n2)= @_; + + # If the precontext buffer is full or we're at the beginning of a + # file, then this is a new diff region, so we should print a + # header indicating the current line numbers. If we're past the + # beginning and the precontext buffer isn't full, then whatever + # we're about to print is contiguous with the end of the last + # region we printed, so we just concatenate them on the output. + if (@precontext == $precontext_lines || ($lineno1 == 0 && $lineno2 == 0)) { + print "@@ -$lineno1 +$lineno2 @@\n"; } - $last_end1 -= $Context_Lines - 1; - $last_end2 -= $Context_Lines - 1; - $file_offset1 += $last_end1; - $file_offset2 += $last_end2; - @printbuf1 = @printbuf1[$last_end1..$#printbuf1]; - @printbuf2 = @printbuf2[$last_end2..$#printbuf2]; - @buf1 = @buf1[$last_end1..$#buf1]; - @buf2 = @buf2[$last_end2..$#buf2]; - while (scalar(@buf1) > $Context_Lines && - scalar(@buf2) > $Context_Lines) { - $foo1 = @buf1[$Context_Lines]; - $foo2 = @buf2[$Context_Lines]; - if (scalar($foo1) != scalar($foo2) || $foo1 ne $foo2) { last; } - $foo1 = shift @printbuf1; - $foo2 = shift @printbuf2; - $foo1 = shift @buf1; - $foo2 = shift @buf2; - ++$file_offset1; - ++$file_offset2; + # Print and clear the precontext buffer. + if (@precontext) { + print ' ', join(' ', @precontext); + $lineno1 += scalar(@precontext); + $lineno2 += scalar(@precontext); + @precontext = (); } - } else { - ++$file_offset1; - ++$file_offset2; - $foo1 = shift @printbuf1; - $foo2 = shift @printbuf2; - $foo1 = shift @buf1; - $foo2 = shift @buf2; - } -} - -close $file1; -close $file2; -sub ffw() { - if (scalar(@_) != 2) { die "improper usage of ffw\n"; } + # Print the differing lines. + printlines(\@lines1, $n1, '-'); + printlines(\@lines2, $n2, '+'); + $lineno1 += $n1; + $lineno2 += $n2; - my $FILE = $_[0]; - my $start = $_[1]; - my $count = 0; - - while ($start-- > 0 && !eof($FILE)) { - <$FILE>; - $count++; - } - - if ($start > 0) {die "File too short for ffw amount\n"; } - return $count; + # Set $postcontext to print the next $postcontext_lines matching lines. + $postcontext = $postcontext_lines; } -sub parse_filearg() { - $start = 0; - split /:/, @_[0]; - if (scalar(@_) > 2) { usage(); } - - $file = $_[0]; - if (scalar(@_) > 1) { $start = $_[1]; } - - return ($file, $start); -} - -sub usage() { - printf "usage: $progname [:start] [:start]\n"; - exit 1; -} - - -# Package Hunk. A Hunk is a group of Blocks which overlap because of the -# context surrounding each block. (So if we're not using context, every -# hunk will contain one block.) -{ -package Hunk; -sub new { -# Arg1 is output from &LCS::diff (which corresponds to one Block) -# Arg2 is the number of items (lines, e.g.,) of context around each block -# -# This subroutine changes $File_Length_Difference +######################## # -# Fields in a Hunk: -# blocks - a list of Block objects -# start - index in file 1 where first block of the hunk starts -# end - index in file 1 where last block of the hunk ends +# Complex diff algorithm # -# Variables: -# before_diff - how much longer file 2 is than file 1 due to all hunks -# until but NOT including this one -# after_diff - difference due to all hunks including this one - my ($class, $piece, $context_items, $maxlen) = @_; - - my $block = new Block ($piece); # this modifies $FLD! - - my $before_diff = $File_Length_Difference; # BEFORE this hunk - my $after_diff = $before_diff + $block->{"length_diff"}; - $File_Length_Difference += $block->{"length_diff"}; - - # @remove_array and @insert_array hold the items to insert and remove - # Save the start & beginning of each array. If the array doesn't exist - # though (e.g., we're only adding items in this block), then figure - # out the line number based on the line number of the other file and - # the current difference in file lenghts - my @remove_array = $block->remove; - my @insert_array = $block->insert; - my ($a1, $a2, $b1, $b2, $start1, $start2, $end1, $end2, $change); - $a1 = @remove_array ? $remove_array[0 ]->{"item_no"} : -1; - $a2 = @remove_array ? $remove_array[-1]->{"item_no"} : -1; - $b1 = @insert_array ? $insert_array[0 ]->{"item_no"} : -1; - $b2 = @insert_array ? $insert_array[-1]->{"item_no"} : -1; - - $start1 = $a1 == -1 ? $b1 - $before_diff : $a1; - $end1 = $a2 == -1 ? $b2 - $after_diff : $a2; - $start2 = $b1 == -1 ? $a1 + $before_diff : $b1; - $end2 = $b2 == -1 ? $a2 + $after_diff : $b2; - $change = scalar(@remove_array) && scalar(@insert_array); - - # At first, a hunk will have just one Block in it - my $hunk = { - "start1" => $start1, - "start2" => $start2, - "end1" => $end1, - "end2" => $end2, - "maxlen" => $maxlen, - "change" => $change, - "blocks" => [$block], - }; - bless $hunk, $class; - - $hunk->flag_context($context_items); - - return $hunk; -} +######################## -# Change the "start" and "end" fields to note that context should be added -# to this hunk -sub flag_context { - my ($hunk, $context_items) = @_; - return unless $context_items; # no context - - # add context before - my $start1 = $hunk->{"start1"}; - my $num_added = $context_items > $start1 ? $start1 : $context_items; - $hunk->{"start1"} -= $num_added; - $hunk->{"start2"} -= $num_added; - - # context after - my $end1 = $hunk->{"end1"}; - $num_added = ($end1+$context_items > $hunk->{"maxlen"}) ? - $hunk->{"maxlen"} - $end1 : - $context_items; - $hunk->{"end1"} += $num_added; - $hunk->{"end2"} += $num_added; -} +{ + my $match_found; + my $discard_lines1; + my $discard_lines2; + + sub match { $match_found = 1; } + sub discard1 { $discard_lines1++ unless $match_found; } + sub discard2 { $discard_lines2++ unless $match_found; } + + sub complex_diff + { + $match_found = 0; + $discard_lines1 = 0; + $discard_lines2 = 0; + + # See Diff.pm. Note that even though this call generates a + # complete diff of both lookahead buffers, all we use it for + # is to figure out how many lines to discard off the front of + # each buffer to resync the streams. + traverse_sequences( \@lines1, \@lines2, + { MATCH => \&match, + DISCARD_A => \&discard1, + DISCARD_B => \&discard2 }); + + if (!$match_found) { + printdiff(scalar(@lines1), scalar(@lines2)); + die "Lost sync!"; + } -# Is there an overlap between hunk arg0 and old hunk arg1? -# Note: if end of old hunk is one less than beginning of second, they overlap -sub does_overlap { - my ($hunk, $oldhunk) = @_; - return "" unless $oldhunk; # first time through, $oldhunk is empty + # Since we shouldn't get here unless the first lines of the + # buffers are different, then we must discard some lines off + # at least one of the buffers. + die if ($discard_lines1 == 0 && $discard_lines2 == 0); - # Do I actually need to test both? - return ($hunk->{"start1"} - $oldhunk->{"end1"} <= 1 || - $hunk->{"start2"} - $oldhunk->{"end2"} <= 1); + printdiff($discard_lines1, $discard_lines2); + } } -# Prepend hunk arg1 to hunk arg0 -# Note that arg1 isn't updated! Only arg0 is. -sub prepend_hunk { - my ($hunk, $oldhunk) = @_; - - $hunk->{"start1"} = $oldhunk->{"start1"}; - $hunk->{"start2"} = $oldhunk->{"start2"}; - - unshift (@{$hunk->{"blocks"}}, @{$oldhunk->{"blocks"}}); -} +####################### +# +# Simple diff algorithm +# +####################### +# Check for a pair of matching lines; if found, generate appropriate +# diff output. +sub checkmatch +{ + my ($n1, $n2) = @_; + + # Check if two adjacent lines match, to reduce false resyncs + # (particularly on unrelated blank lines). This generates + # larger-than-necessary diffs when a single line really should be + # treated as common; if that bugs you, use Algorithm::Diff. + if ($lines1[$n1] eq $lines2[$n2] && $lines1[$n1+1] eq $lines2[$n2+1]) { + printdiff($n1, $n2); + return 1; + } -# DIFF OUTPUT ROUTINES. THESE ROUTINES CONTAIN DIFF FORMATTING INFO... -sub output_diff { - if (defined $main::opt_u) {&output_unified_diff(@_)} - elsif (defined $main::opt_c) {&output_context_diff(@_)} - else {die "unknown diff"} + return 0; } -sub output_unified_diff { - my ($hunk, $fileref1, $fileref2) = @_; - my @blocklist; - - # Calculate item number range. - my $range1 = $hunk->unified_range(1, $file_offset1); - my $range2 = $hunk->unified_range(2, $file_offset2); - print "@@ -$range1 +$range2 @@\n"; - - # Outlist starts containing the hunk of file 1. - # Removing an item just means putting a '-' in front of it. - # Inserting an item requires getting it from file2 and splicing it in. - # We splice in $num_added items. Remove blocks use $num_added because - # splicing changed the length of outlist. - # We remove $num_removed items. Insert blocks use $num_removed because - # their item numbers---corresponding to positions in file *2*--- don't take - # removed items into account. - my $low = $hunk->{"start1"}; - my $hi = $hunk->{"end1"}; - my ($num_added, $num_removed) = (0,0); - my @outlist = @$fileref1[$low..$hi]; - map {s/^/ /} @outlist; # assume it's just context - - foreach my $block (@{$hunk->{"blocks"}}) { - foreach my $item ($block->remove) { - my $op = $item->{"sign"}; # - - my $offset = $item->{"item_no"} - $low + $num_added; - $outlist[$offset] =~ s/^ /$op/; - $num_removed++; - } - foreach my $item ($block->insert) { - my $op = $item->{"sign"}; # + - my $i = $item->{"item_no"}; - my $offset = $i - $hunk->{"start2"} + $num_removed; - splice(@outlist,$offset,0,"$op$$fileref2[$i]"); - $num_added++; +sub simple_diff +{ + # Look for differences of $cnt lines to resync, + # increasing $cnt from 1 to $lookahead_lines until we find + # something. + for (my $cnt = 1; $cnt < $lookahead_lines-1; ++$cnt) { + # Check for n lines in one file being replaced by + # n lines in the other. + return if checkmatch($cnt, $cnt); + # Find differences where n lines in one file were + # replaced by m lines in the other. We let m = $cnt + # and iterate for n = 0 to $cnt-1. + for (my $n = 0; $n < $cnt; ++$n) { + return if checkmatch($n, $cnt); + return if checkmatch($cnt, $n); } } - map {s/$/\n/} @outlist; # add \n's - print @outlist; - + printdiff(scalar(@lines1), scalar(@lines2)); + die "Lost sync!"; } -sub output_context_diff { - my ($hunk, $fileref1, $fileref2) = @_; - my @blocklist; - - print "***************\n"; - # Calculate item number range. - my $range1 = $hunk->context_range(1, $file_offset1); - my $range2 = $hunk->context_range(2, $file_offset2); - - # Print out file 1 part for each block in context diff format if there are - # any blocks that remove items - print "*** $range1 ****\n"; - my $low = $hunk->{"start1"}; - my $hi = $hunk->{"end1"}; - if (@blocklist = grep {$_->remove} @{$hunk->{"blocks"}}) { - my @outlist = @$fileref1[$low..$hi]; - map {s/^/ /} @outlist; # assume it's just context - foreach my $block (@blocklist) { - my $op = $block->op; # - or ! - foreach my $item ($block->remove) { - $outlist[$item->{"item_no"} - $low] =~ s/^ /$op/; - } - } - map {s/$/\n/} @outlist; # add \n's - print @outlist; +# Set the pointer to the appropriate diff function. +# +# Note that in either case the function determines how many lines to +# discard from the front of each lookahead buffer to resync the +# streams, then prints the appropriate diff output and discards them. +# After the function returns, it should always be the case that +# $lines1[0] eq $lines2[0]. +my $find_diff = $use_complexdiff ? \&complex_diff : \&simple_diff; + +# The main loop. +while (1) { + # keep lookahead buffers topped up + fill($fh1, \@lines1); + fill($fh2, \@lines2); + + # peek at first line in each buffer + my $l1 = $lines1[0]; + my $l2 = $lines2[0]; + + if (!defined($l1) && !defined($l2)) { + # reached EOF on both streams: exit + exit(1); } - print "--- $range2 ----\n"; - $low = $hunk->{"start2"}; - $hi = $hunk->{"end2"}; - if (@blocklist = grep {$_->insert} @{$hunk->{"blocks"}}) { - my @outlist = @$fileref2[$low..$hi]; - map {s/^/ /} @outlist; # assume it's just context - foreach my $block (@blocklist) { - my $op = $block->op; # + or ! - foreach my $item ($block->insert) { - $outlist[$item->{"item_no"} - $low] =~ s/^ /$op/; + if ($l1 eq $l2) { + # matching lines: delete from lookahead buffer + shift @lines1; + shift @lines2; + # figure out what to do with this line + if ($postcontext > 0) { + # we're in the post-context of a diff: print it + $postcontext--; + print ' ', $l1; + $lineno1++; + $lineno2++; + } + else { + # we're in the middle of a matching region... save this + # line for precontext in case we run into a difference. + push @precontext, $l1; + # don't let precontext buffer get bigger than needed + while (@precontext > $precontext_lines) { + shift @precontext; + $lineno1++; + $lineno2++; } } - map {s/$/\n/} @outlist; # add \n's - print @outlist; } -} - -sub context_range { -# Generate a range of item numbers to print. Only print 1 number if the range -# has only one item in it. Otherwise, it's 'start,end' - my ($hunk, $flag, $offset) = @_; - my ($start, $end) = ($hunk->{"start$flag"},$hunk->{"end$flag"}); - - # index from 1, not zero - $start += $offset + 1; - $end += $offset + 1; - my $range = ($start < $end) ? "$start,$end" : $end; - return $range; -} - -sub unified_range { -# Generate a range of item numbers to print for unified diff -# Print number where block starts, followed by number of lines in the block -# (don't print number of lines if it's 1) - my ($hunk, $flag, $offset) = @_; - my ($start, $end) = ($hunk->{"start$flag"},$hunk->{"end$flag"}); - - # index from 1, not zero - $start += $offset + 1; - $end += $offset + 1; - my $length = $end - $start + 1; - my $first = $length < 2 ? $end : $start; # strange, but correct... - my $range = $length== 1 ? $first : "$first,$length"; - return $range; -} -} # end Package Hunk - -# Package Block. A block is an operation removing, adding, or changing -# a group of items. Basically, this is just a list of changes, where each -# change adds or deletes a single item. -# (Change could be a separate class, but it didn't seem worth it) -{ -package Block; -sub new { -# Input is a chunk from &Algorithm::LCS::diff -# Fields in a block: -# length_diff - how much longer file 2 is than file 1 due to this block -# Each change has: -# sign - '+' for insert, '-' for remove -# item_no - number of the item in the file (e.g., line number) -# We don't bother storing the text of the item -# - my ($class,$chunk) = @_; - my @changes = (); - -# This just turns each change into a hash. - foreach my $item (@$chunk) { - my ($sign, $item_no, $text) = @$item; - my $hashref = {"sign" => $sign, "item_no" => $item_no}; - push @changes, $hashref; + else { + # Mismatch. Deal with it. + &$find_diff(); } - - my $block = { "changes" => \@changes }; - bless $block, $class; - - $block->{"length_diff"} = $block->insert - $block->remove; - return $block; } - - -# LOW LEVEL FUNCTIONS -sub op { -# what kind of block is this? - my $block = shift; - my $insert = $block->insert; - my $remove = $block->remove; - - $remove && $insert and return '!'; - $remove and return '-'; - $insert and return '+'; - warn "unknown block type"; - return '^'; # context block -} - -# Returns a list of the changes in this block that remove items -# (or the number of removals if called in scalar context) -sub remove { return grep {$_->{"sign"} eq '-'} @{shift->{"changes"}}; } - -# Returns a list of the changes in this block that insert items -sub insert { return grep {$_->{"sign"} eq '+'} @{shift->{"changes"}}; } - -} # end of package Block