package/wolfssl: enable ARMv8 hardware acceleration

package/wolfssl: enable ARMv8 hardware acceleration

Enable hardware acceleration for ARMv8 targets.

When ARMv8 hardware acceleration is enabled on AArch64 without any
additional flags, the build fails with the following messages:

/tmp/cciv7Oei.s: Assembler messages:
/tmp/cciv7Oei.s:580: Error: invalid addressing mode at operand 2 -- `ld1 {v0.2d},[x0,256]'
/tmp/cciv7Oei.s:616: Error: invalid addressing mode at operand 2 -- `st1 {v0.2d},[x0,256]'
/tmp/cciv7Oei.s:629: Error: invalid addressing mode at operand 2 -- `ld1 {v0.2d},[x0,256]'
/tmp/cciv7Oei.s:669: Error: invalid addressing mode at operand 2 -- `st1 {v0.2d},[x0,256]'
/tmp/cciv7Oei.s:1211: Error: invalid addressing mode at operand 2 -- `ld1 {v16.2d},[x0,304]'
/tmp/cciv7Oei.s:1368: Error: invalid addressing mode at operand 2 -- `ld1 {v17.16b},[x19,304]'
/tmp/cciv7Oei.s:1554: Error: invalid addressing mode at operand 2 -- `ld1 {v16.2d},[x0,304]'
/tmp/cciv7Oei.s:1719: Error: invalid addressing mode at operand 2 -- `ld1 {v17.16b},[x19,304]'
/tmp/cciv7Oei.s:1870: Error: invalid addressing mode at operand 2 -- `ld1 {v16.2d},[x0,304]'
/tmp/cciv7Oei.s:2043: Error: invalid addressing mode at operand 2 -- `ld1 {v17.16b},[x19,304]'
make[3]: *** [Makefile:3801: wolfcrypt/src/port/arm/src_libwolfssl_la-armv8-aes.lo] Error 1

This is because of some inline assembly in parts of the AES structure
using the "m" constraint.

So lets use the flag -mstrict-align to prevent this error.

Signed-off-by: Sergio Prado <sergio.prado@e-labworks.com>
[Thomas: restrict the -mstrict-align workaround to AArch64, as ARMv8-A
can also be used in an AArch32 build, and in this case, gcc doesn't
support the -mstrict-align flag]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>