Add defconfig for MIPS Creator ci40

Signed-off-by: Abhimanyu Vishwakarma <Abhimanyu.V@gmail.com>
Acked-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Tested-by: Rahul Bedarkar <rahulbedarkar89@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

diff --git a/board/ci40/genimage.cfg b/board/ci40/genimage.cfg
new file mode 100644 (file)
index 0000000..0ffc91c
--- /dev/null
+++ b/board/ci40/genimage.cfg
@@ -0,0 +1,12 @@
+# Minimal SD card image
+#
+
+image sdcard.img {
+  hdimage {
+  }
+
+  partition rootfs {
+    partition-type = 0x83
+    image = "rootfs.ext4"
+  }
+}

diff --git a/board/ci40/post-build.sh b/board/ci40/post-build.sh
new file mode 100755 (executable)
index 0000000..9af74c7
--- /dev/null
+++ b/board/ci40/post-build.sh
@@ -0,0 +1,4 @@
+#!/bin/sh
+
+# Copy to target
+cp ${BINARIES_DIR}/vmlinux.gz.itb ${TARGET_DIR}/fitImage

diff --git a/board/ci40/readme.txt b/board/ci40/readme.txt
new file mode 100644 (file)
index 0000000..ba1eb93
--- /dev/null
+++ b/board/ci40/readme.txt
@@ -0,0 +1,65 @@
+*********************
+* MIPS Creator CI40 *
+*********************
+
+This document details how to build and run a Buildroot system on the
+MIPS Creator CI40 platform. For more details about the CI40, see
+https://creatordev.io/ci40-iot-hub.html.
+
+How to build
+------------
+
+$ make ci40_defconfig
+$ make
+
+Prepare USB/MMC for boot
+------------------------
+
+On successful build, "sdcard.img" file will be created in 'output/images'
+folder.
+
+Use following command to write image to bootable device
+
+$ sudo dd if=./output/images/sdcard.img of=/dev/<your-microsd-or-usb-device>
+
+Booting from USB/MMC
+--------------------
+
+The boot loader is already present in NOR flash. To boot your newly generated
+Linux and root filesystem, you need to interrupt U-Boot autoboot. Current
+U-Boot is configured with 2 seconds of boot-delay, after expiry of this
+boot-delay timeout U-Boot starts booting the default image. To interrupt
+autoboot, press any key before the boot-delay time expires, U-Boot will
+stop the autoboot process and give a U-Boot prompt. You can now boot to
+your preferred boot method as describe below:
+
+From USB
+  pistachio # run usbboot
+
+From SD-Card
+  pistachio # run mmcboot
+
+Persistent boot command
+-----------------------
+
+To boot automatically to your preferred boot method, use following command to
+make it persistent, for example to automatically boot to usb:
+
+  pistachio # setenv bootcmd run usbboot
+  pistachio # saveenv
+
+Flash new bootloader
+--------------------
+
+The bootloader image will be available in the 'output/images' folder. To flash
+the new bootloader, copy it to the device and use the following command on the
+device:
+
+# flashcp -v u-boot-pistachio_marduk-<version>.img /dev/mtd0
+
+Online docs
+-----------
+
+Mostly for OpenWRT but it is applicable to Buildroot
+https://docs.creatordev.io/ci40/guides/openwrt-platform/#overview
+

diff --git a/configs/ci40_defconfig b/configs/ci40_defconfig
new file mode 100644 (file)
index 0000000..2ea3afe
--- /dev/null
+++ b/configs/ci40_defconfig
@@ -0,0 +1,48 @@
+# architecture
+BR2_mipsel=y
+BR2_mips_32r2=y
+
+# linux header same as custom kernel ie 4.4.x
+BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_4_4=y
+
+# kernel
+BR2_LINUX_KERNEL=y
+BR2_LINUX_KERNEL_CUSTOM_TARBALL=y
+BR2_LINUX_KERNEL_CUSTOM_TARBALL_LOCATION="$(call github,CreatorDev,linux,openwrt-4.4.14)/linux-openwrt-4.4.14.tar.gz"
+BR2_LINUX_KERNEL_DEFCONFIG="pistachio"
+BR2_LINUX_KERNEL_IMAGE_TARGET_CUSTOM=y
+# vmlinux.gz.itb image includes img/pistachio_marduk device tree
+BR2_LINUX_KERNEL_IMAGE_TARGET_NAME="vmlinux.gz.itb"
+
+# bootloader flash support
+BR2_PACKAGE_MTD=y
+
+# wireless firmware
+BR2_PACKAGE_UCCP420WLAN=y
+
+# wireless package
+BR2_PACKAGE_WIRELESS_TOOLS=y
+BR2_PACKAGE_WPA_SUPPLICANT=y
+BR2_PACKAGE_WPA_SUPPLICANT_PASSPHRASE=y
+
+# bootloader
+BR2_TARGET_UBOOT=y
+BR2_TARGET_UBOOT_BUILD_SYSTEM_KCONFIG=y
+BR2_TARGET_UBOOT_BOARD_DEFCONFIG="pistachio_marduk"
+BR2_TARGET_UBOOT_CUSTOM_TARBALL=y
+BR2_TARGET_UBOOT_CUSTOM_TARBALL_LOCATION="$(call github,CreatorDev,u-boot,v1.0.5)/u-boot-CreatorDev-v1.0.5.tar.gz"
+BR2_TARGET_UBOOT_FORMAT_CUSTOM=y
+BR2_TARGET_UBOOT_FORMAT_CUSTOM_NAME="u-boot-pistachio_marduk-2015.10-v1.0.5.img"
+
+# fitimage / image generation
+BR2_PACKAGE_HOST_UBOOT_TOOLS=y
+BR2_PACKAGE_HOST_UBOOT_TOOLS_FIT_SUPPORT=y
+BR2_PACKAGE_HOST_UBOOT_TOOLS_FIT_SIGNATURE_SUPPORT=y
+BR2_ROOTFS_POST_BUILD_SCRIPT="board/ci40/post-build.sh"
+
+# image generation
+BR2_TARGET_ROOTFS_EXT2=y
+BR2_TARGET_ROOTFS_EXT2_4=y
+BR2_PACKAGE_HOST_GENIMAGE=y
+BR2_ROOTFS_POST_IMAGE_SCRIPT="support/scripts/genimage.sh"
+BR2_ROOTFS_POST_SCRIPT_ARGS="-c board/ci40/genimage.cfg"