+++ /dev/null
-diff -Nrup linux-2.6.24/arch/arm/mach-at91/at91sam9261_devices.c linux-avr32/arch/arm/mach-at91/at91sam9261_devices.c
---- linux-2.6.24/arch/arm/mach-at91/at91sam9261_devices.c 2008-01-24 17:58:37.000000000 -0500
-+++ linux-avr32/arch/arm/mach-at91/at91sam9261_devices.c 2008-02-01 14:51:35.000000000 -0500
-@@ -530,6 +530,20 @@ void __init at91_add_device_lcdc(struct
- at91_set_B_periph(AT91_PIN_PB27, 0); /* LCDD22 */
- at91_set_B_periph(AT91_PIN_PB28, 0); /* LCDD23 */
-
-+#ifdef CONFIG_FB_INTSRAM
-+ {
-+ void __iomem *fb;
-+ struct resource *fb_res = &lcdc_resources[2];
-+ size_t fb_len = fb_res->end - fb_res->start + 1;
-+
-+ fb = ioremap_writecombine(fb_res->start, fb_len);
-+ if (fb) {
-+ memset(fb, 0, fb_len);
-+ iounmap(fb, fb_len);
-+ }
-+ }
-+#endif
-+
- lcdc_data = *data;
- platform_device_register(&at91_lcdc_device);
- }
-diff -Nrup linux-2.6.24/arch/arm/mach-at91/at91sam9rl_devices.c linux-avr32/arch/arm/mach-at91/at91sam9rl_devices.c
---- linux-2.6.24/arch/arm/mach-at91/at91sam9rl_devices.c 2008-01-24 17:58:37.000000000 -0500
-+++ linux-avr32/arch/arm/mach-at91/at91sam9rl_devices.c 2008-02-01 14:51:35.000000000 -0500
-@@ -375,6 +375,20 @@ void __init at91_add_device_lcdc(struct
- at91_set_B_periph(AT91_PIN_PC24, 0); /* LCDD22 */
- at91_set_B_periph(AT91_PIN_PC25, 0); /* LCDD23 */
-
-+#ifdef CONFIG_FB_INTSRAM
-+ {
-+ void __iomem *fb;
-+ struct resource *fb_res = &lcdc_resources[2];
-+ size_t fb_len = fb_res->end - fb_res->start + 1;
-+
-+ fb = ioremap_writecombine(fb_res->start, fb_len);
-+ if (fb) {
-+ memset(fb, 0, fb_len);
-+ iounmap(fb, fb_len);
-+ }
-+ }
-+#endif
-+
- lcdc_data = *data;
- platform_device_register(&at91_lcdc_device);
- }
-diff -Nrup linux-2.6.24/arch/avr32/boards/atngw100/Kconfig linux-avr32/arch/avr32/boards/atngw100/Kconfig
---- linux-2.6.24/arch/avr32/boards/atngw100/Kconfig 1969-12-31 19:00:00.000000000 -0500
-+++ linux-avr32/arch/avr32/boards/atngw100/Kconfig 2008-02-01 14:51:35.000000000 -0500
-@@ -0,0 +1,12 @@
-+# NGW100 customization
-+
-+config BOARD_ATNGW100_I2C_GPIO
-+ bool "Use GPIO for i2c instead of built-in TWI module"
-+ help
-+ The driver for the built-in TWI module has been plagued by
-+ various problems, while the i2c-gpio driver is based on the
-+ trusty old i2c-algo-bit bitbanging engine, making it work
-+ on pretty much any setup.
-+
-+ Choose 'Y' here if you're having i2c-related problems and
-+ want to rule out the i2c bus driver.
-diff -Nrup linux-2.6.24/arch/avr32/boards/atngw100/setup.c linux-avr32/arch/avr32/boards/atngw100/setup.c
---- linux-2.6.24/arch/avr32/boards/atngw100/setup.c 2008-01-24 17:58:37.000000000 -0500
-+++ linux-avr32/arch/avr32/boards/atngw100/setup.c 2008-02-01 14:51:35.000000000 -0500
-@@ -20,7 +20,7 @@
- #include <asm/io.h>
- #include <asm/setup.h>
-
--#include <asm/arch/at32ap7000.h>
-+#include <asm/arch/at32ap700x.h>
- #include <asm/arch/board.h>
- #include <asm/arch/init.h>
- #include <asm/arch/portmux.h>
-@@ -42,6 +42,11 @@ static struct spi_board_info spi0_board_
- },
- };
-
-+static struct mci_platform_data __initdata mci0_data = {
-+ .detect_pin = GPIO_PIN_PC(25),
-+ .wp_pin = GPIO_PIN_PE(0),
-+};
-+
- /*
- * The next two functions should go away as the boot loader is
- * supposed to initialize the macb address registers with a valid
-@@ -124,6 +129,7 @@ static struct platform_device ngw_gpio_l
- }
- };
-
-+#ifdef CONFIG_BOARD_ATNGW100_I2C_GPIO
- static struct i2c_gpio_platform_data i2c_gpio_data = {
- .sda_pin = GPIO_PIN_PA(6),
- .scl_pin = GPIO_PIN_PA(7),
-@@ -139,6 +145,7 @@ static struct platform_device i2c_gpio_d
- .platform_data = &i2c_gpio_data,
- },
- };
-+#endif
-
- static int __init atngw100_init(void)
- {
-@@ -157,6 +164,7 @@ static int __init atngw100_init(void)
- set_hw_addr(at32_add_device_eth(1, ð_data[1]));
-
- at32_add_device_spi(0, spi0_board_info, ARRAY_SIZE(spi0_board_info));
-+ at32_add_device_mci(0, &mci0_data);
- at32_add_device_usba(0, NULL);
-
- for (i = 0; i < ARRAY_SIZE(ngw_leds); i++) {
-@@ -165,11 +173,15 @@ static int __init atngw100_init(void)
- }
- platform_device_register(&ngw_gpio_leds);
-
-+#ifdef CONFIG_BOARD_ATNGW100_I2C_GPIO
- at32_select_gpio(i2c_gpio_data.sda_pin,
- AT32_GPIOF_MULTIDRV | AT32_GPIOF_OUTPUT | AT32_GPIOF_HIGH);
- at32_select_gpio(i2c_gpio_data.scl_pin,
- AT32_GPIOF_MULTIDRV | AT32_GPIOF_OUTPUT | AT32_GPIOF_HIGH);
- platform_device_register(&i2c_gpio_device);
-+#else
-+ at32_add_device_twi(0);
-+#endif
-
- return 0;
- }
-diff -Nrup linux-2.6.24/arch/avr32/boards/atstk1000/atstk1000.h linux-avr32/arch/avr32/boards/atstk1000/atstk1000.h
---- linux-2.6.24/arch/avr32/boards/atstk1000/atstk1000.h 2008-01-24 17:58:37.000000000 -0500
-+++ linux-avr32/arch/avr32/boards/atstk1000/atstk1000.h 2008-02-01 14:51:35.000000000 -0500
-@@ -12,4 +12,6 @@
-
- extern struct atmel_lcdfb_info atstk1000_lcdc_data;
-
-+void atstk1000_setup_j2_leds(void);
-+
- #endif /* __ARCH_AVR32_BOARDS_ATSTK1000_ATSTK1000_H */
-diff -Nrup linux-2.6.24/arch/avr32/boards/atstk1000/atstk1002.c linux-avr32/arch/avr32/boards/atstk1000/atstk1002.c
---- linux-2.6.24/arch/avr32/boards/atstk1000/atstk1002.c 2008-01-24 17:58:37.000000000 -0500
-+++ linux-avr32/arch/avr32/boards/atstk1000/atstk1002.c 2008-02-01 14:51:35.000000000 -0500
-@@ -11,7 +11,6 @@
- #include <linux/etherdevice.h>
- #include <linux/init.h>
- #include <linux/kernel.h>
--#include <linux/leds.h>
- #include <linux/platform_device.h>
- #include <linux/string.h>
- #include <linux/types.h>
-@@ -22,7 +21,7 @@
-
- #include <asm/io.h>
- #include <asm/setup.h>
--#include <asm/arch/at32ap7000.h>
-+#include <asm/arch/at32ap700x.h>
- #include <asm/arch/board.h>
- #include <asm/arch/init.h>
- #include <asm/arch/portmux.h>
-@@ -49,18 +48,16 @@ static struct eth_platform_data __initda
- },
- };
-
--#ifndef CONFIG_BOARD_ATSTK1002_SW1_CUSTOM
--#ifndef CONFIG_BOARD_ATSTK1002_SW3_CUSTOM
-+#ifdef CONFIG_BOARD_ATSTK1000_EXTDAC
- static struct at73c213_board_info at73c213_data = {
- .ssc_id = 0,
- .shortname = "AVR32 STK1000 external DAC",
- };
- #endif
--#endif
-
--#ifndef CONFIG_BOARD_ATSTK1002_SW1_CUSTOM
-+#ifndef CONFIG_BOARD_ATSTK100X_SW1_CUSTOM
- static struct spi_board_info spi0_board_info[] __initdata = {
--#ifndef CONFIG_BOARD_ATSTK1002_SW3_CUSTOM
-+#ifdef CONFIG_BOARD_ATSTK1000_EXTDAC
- {
- /* AT73C213 */
- .modalias = "at73c213",
-@@ -80,12 +77,25 @@ static struct spi_board_info spi0_board_
- };
- #endif
-
--#ifdef CONFIG_BOARD_ATSTK1002_SPI1
-+#ifdef CONFIG_BOARD_ATSTK100X_SPI1
- static struct spi_board_info spi1_board_info[] __initdata = { {
- /* patch in custom entries here */
- } };
- #endif
-
-+static struct cf_platform_data __initdata cf0_data = {
-+#ifdef CONFIG_BOARD_ATSTK1000_CF_HACKS
-+ .detect_pin = CONFIG_BOARD_ATSTK1000_CF_DETECT_PIN,
-+ .reset_pin = CONFIG_BOARD_ATSTK1000_CF_RESET_PIN,
-+#else
-+ .detect_pin = GPIO_PIN_NONE,
-+ .reset_pin = GPIO_PIN_NONE,
-+#endif
-+ .vcc_pin = GPIO_PIN_NONE,
-+ .ready_pin = GPIO_PIN_PB(27),
-+ .cs = 4,
-+};
-+
- /*
- * The next two functions should go away as the boot loader is
- * supposed to initialize the macb address registers with a valid
-@@ -141,68 +151,8 @@ static void __init set_hw_addr(struct pl
- clk_put(pclk);
- }
-
--#ifdef CONFIG_BOARD_ATSTK1002_J2_LED
--
--static struct gpio_led stk_j2_led[] = {
--#ifdef CONFIG_BOARD_ATSTK1002_J2_LED8
--#define LEDSTRING "J2 jumpered to LED8"
-- { .name = "led0:amber", .gpio = GPIO_PIN_PB( 8), },
-- { .name = "led1:amber", .gpio = GPIO_PIN_PB( 9), },
-- { .name = "led2:amber", .gpio = GPIO_PIN_PB(10), },
-- { .name = "led3:amber", .gpio = GPIO_PIN_PB(13), },
-- { .name = "led4:amber", .gpio = GPIO_PIN_PB(14), },
-- { .name = "led5:amber", .gpio = GPIO_PIN_PB(15), },
-- { .name = "led6:amber", .gpio = GPIO_PIN_PB(16), },
-- { .name = "led7:amber", .gpio = GPIO_PIN_PB(30),
-- .default_trigger = "heartbeat", },
--#else /* RGB */
--#define LEDSTRING "J2 jumpered to RGB LEDs"
-- { .name = "r1:red", .gpio = GPIO_PIN_PB( 8), },
-- { .name = "g1:green", .gpio = GPIO_PIN_PB(10), },
-- { .name = "b1:blue", .gpio = GPIO_PIN_PB(14), },
--
-- { .name = "r2:red", .gpio = GPIO_PIN_PB( 9),
-- .default_trigger = "heartbeat", },
-- { .name = "g2:green", .gpio = GPIO_PIN_PB(13), },
-- { .name = "b2:blue", .gpio = GPIO_PIN_PB(15),
-- .default_trigger = "heartbeat", },
-- /* PB16, PB30 unused */
--#endif
--};
--
--static struct gpio_led_platform_data stk_j2_led_data = {
-- .num_leds = ARRAY_SIZE(stk_j2_led),
-- .leds = stk_j2_led,
--};
--
--static struct platform_device stk_j2_led_dev = {
-- .name = "leds-gpio",
-- .id = 2, /* gpio block J2 */
-- .dev = {
-- .platform_data = &stk_j2_led_data,
-- },
--};
--
--static void setup_j2_leds(void)
--{
-- unsigned i;
--
-- for (i = 0; i < ARRAY_SIZE(stk_j2_led); i++)
-- at32_select_gpio(stk_j2_led[i].gpio, AT32_GPIOF_OUTPUT);
--
-- printk("STK1002: " LEDSTRING "\n");
-- platform_device_register(&stk_j2_led_dev);
--}
--
--#else
--static void setup_j2_leds(void)
--{
--}
--#endif
--
--#ifndef CONFIG_BOARD_ATSTK1002_SW1_CUSTOM
--#ifndef CONFIG_BOARD_ATSTK1002_SW3_CUSTOM
--static void __init at73c213_set_clk(struct at73c213_board_info *info)
-+#ifdef CONFIG_BOARD_ATSTK1000_EXTDAC
-+static void __init atstk1002_setup_extdac(void)
- {
- struct clk *gclk;
- struct clk *pll;
-@@ -220,7 +170,7 @@ static void __init at73c213_set_clk(stru
- }
-
- at32_select_periph(GPIO_PIN_PA(30), GPIO_PERIPH_A, 0);
-- info->dac_clk = gclk;
-+ at73c213_data.dac_clk = gclk;
-
- err_set_clk:
- clk_put(pll);
-@@ -229,12 +179,16 @@ err_pll:
- err_gclk:
- return;
- }
--#endif
--#endif
-+#else
-+static void __init atstk1002_setup_extdac(void)
-+{
-+
-+}
-+#endif /* CONFIG_BOARD_ATSTK1000_EXTDAC */
-
- void __init setup_board(void)
- {
--#ifdef CONFIG_BOARD_ATSTK1002_SW2_CUSTOM
-+#ifdef CONFIG_BOARD_ATSTK100X_SW2_CUSTOM
- at32_map_usart(0, 1); /* USART 0/B: /dev/ttyS1, IRDA */
- #else
- at32_map_usart(1, 0); /* USART 1/A: /dev/ttyS0, DB9 */
-@@ -271,7 +225,7 @@ static int __init atstk1002_init(void)
-
- at32_add_system_devices();
-
--#ifdef CONFIG_BOARD_ATSTK1002_SW2_CUSTOM
-+#ifdef CONFIG_BOARD_ATSTK100X_SW2_CUSTOM
- at32_add_device_usart(1);
- #else
- at32_add_device_usart(0);
-@@ -281,12 +235,16 @@ static int __init atstk1002_init(void)
- #ifndef CONFIG_BOARD_ATSTK1002_SW6_CUSTOM
- set_hw_addr(at32_add_device_eth(0, ð_data[0]));
- #endif
--#ifndef CONFIG_BOARD_ATSTK1002_SW1_CUSTOM
-+#ifndef CONFIG_BOARD_ATSTK100X_SW1_CUSTOM
- at32_add_device_spi(0, spi0_board_info, ARRAY_SIZE(spi0_board_info));
- #endif
--#ifdef CONFIG_BOARD_ATSTK1002_SPI1
-+#ifdef CONFIG_BOARD_ATSTK100X_SPI1
- at32_add_device_spi(1, spi1_board_info, ARRAY_SIZE(spi1_board_info));
- #endif
-+ at32_add_device_twi(0);
-+#ifndef CONFIG_BOARD_ATSTK100X_SW2_CUSTOM
-+ at32_add_device_mci(0, NULL);
-+#endif
- #ifdef CONFIG_BOARD_ATSTK1002_SW5_CUSTOM
- set_hw_addr(at32_add_device_eth(1, ð_data[1]));
- #else
-@@ -294,17 +252,18 @@ static int __init atstk1002_init(void)
- fbmem_start, fbmem_size);
- #endif
- at32_add_device_usba(0, NULL);
--#ifndef CONFIG_BOARD_ATSTK1002_SW3_CUSTOM
-+#ifdef CONFIG_BOARD_ATSTK100X_ENABLE_AC97
-+ at32_add_device_ac97c(0);
-+#else
-+ at32_add_device_abdac(0);
-+#endif
-+#ifndef CONFIG_BOARD_ATSTK100X_SW3_CUSTOM
- at32_add_device_ssc(0, ATMEL_SSC_TX);
- #endif
-+ at32_add_device_cf(0, 2, &cf0_data);
-
-- setup_j2_leds();
--
--#ifndef CONFIG_BOARD_ATSTK1002_SW3_CUSTOM
--#ifndef CONFIG_BOARD_ATSTK1002_SW1_CUSTOM
-- at73c213_set_clk(&at73c213_data);
--#endif
--#endif
-+ atstk1000_setup_j2_leds();
-+ atstk1002_setup_extdac();
-
- return 0;
- }
-diff -Nrup linux-2.6.24/arch/avr32/boards/atstk1000/atstk1003.c linux-avr32/arch/avr32/boards/atstk1000/atstk1003.c
---- linux-2.6.24/arch/avr32/boards/atstk1000/atstk1003.c 1969-12-31 19:00:00.000000000 -0500
-+++ linux-avr32/arch/avr32/boards/atstk1000/atstk1003.c 2008-02-01 14:51:35.000000000 -0500
-@@ -0,0 +1,181 @@
-+/*
-+ * ATSTK1003 daughterboard-specific init code
-+ *
-+ * Copyright (C) 2007 Atmel Corporation
-+ *
-+ * This program is free software; you can redistribute it and/or modify
-+ * it under the terms of the GNU General Public License version 2 as
-+ * published by the Free Software Foundation.
-+ */
-+#include <linux/clk.h>
-+#include <linux/err.h>
-+#include <linux/init.h>
-+#include <linux/kernel.h>
-+#include <linux/platform_device.h>
-+#include <linux/string.h>
-+#include <linux/types.h>
-+
-+#include <linux/spi/at73c213.h>
-+#include <linux/spi/spi.h>
-+
-+#include <asm/setup.h>
-+
-+#include <asm/arch/at32ap700x.h>
-+#include <asm/arch/board.h>
-+#include <asm/arch/init.h>
-+#include <asm/arch/portmux.h>
-+
-+#include "atstk1000.h"
-+
-+#ifdef CONFIG_BOARD_ATSTK1000_EXTDAC
-+static struct at73c213_board_info at73c213_data = {
-+ .ssc_id = 0,
-+ .shortname = "AVR32 STK1000 external DAC",
-+};
-+#endif
-+
-+#ifndef CONFIG_BOARD_ATSTK100X_SW1_CUSTOM
-+static struct spi_board_info spi0_board_info[] __initdata = {
-+#ifdef CONFIG_BOARD_ATSTK1000_EXTDAC
-+ {
-+ /* AT73C213 */
-+ .modalias = "at73c213",
-+ .max_speed_hz = 200000,
-+ .chip_select = 0,
-+ .mode = SPI_MODE_1,
-+ .platform_data = &at73c213_data,
-+ },
-+#endif
-+ /*
-+ * We can control the LTV350QV LCD panel, but it isn't much
-+ * point since we don't have an LCD controller...
-+ */
-+};
-+#endif
-+
-+#ifdef CONFIG_BOARD_ATSTK100X_SPI1
-+static struct spi_board_info spi1_board_info[] __initdata = { {
-+ /* patch in custom entries here */
-+} };
-+#endif
-+
-+static struct cf_platform_data __initdata cf0_data = {
-+#ifdef CONFIG_BOARD_ATSTK1000_CF_HACKS
-+ .detect_pin = CONFIG_BOARD_ATSTK1000_CF_DETECT_PIN,
-+ .reset_pin = CONFIG_BOARD_ATSTK1000_CF_RESET_PIN,
-+#else
-+ .detect_pin = GPIO_PIN_NONE,
-+ .reset_pin = GPIO_PIN_NONE,
-+#endif
-+ .vcc_pin = GPIO_PIN_NONE,
-+ .ready_pin = GPIO_PIN_PB(27),
-+ .cs = 4,
-+};
-+
-+#ifdef CONFIG_BOARD_ATSTK1000_EXTDAC
-+static void __init atstk1003_setup_extdac(void)
-+{
-+ struct clk *gclk;
-+ struct clk *pll;
-+
-+ gclk = clk_get(NULL, "gclk0");
-+ if (IS_ERR(gclk))
-+ goto err_gclk;
-+ pll = clk_get(NULL, "pll0");
-+ if (IS_ERR(pll))
-+ goto err_pll;
-+
-+ if (clk_set_parent(gclk, pll)) {
-+ pr_debug("STK1000: failed to set pll0 as parent for DAC clock\n");
-+ goto err_set_clk;
-+ }
-+
-+ at32_select_periph(GPIO_PIN_PA(30), GPIO_PERIPH_A, 0);
-+ at73c213_data.dac_clk = gclk;
-+
-+err_set_clk:
-+ clk_put(pll);
-+err_pll:
-+ clk_put(gclk);
-+err_gclk:
-+ return;
-+}
-+#else
-+static void __init atstk1003_setup_extdac(void)
-+{
-+
-+}
-+#endif /* CONFIG_BOARD_ATSTK1000_EXTDAC */
-+
-+void __init setup_board(void)
-+{
-+#ifdef CONFIG_BOARD_ATSTK100X_SW2_CUSTOM
-+ at32_map_usart(0, 1); /* USART 0/B: /dev/ttyS1, IRDA */
-+#else
-+ at32_map_usart(1, 0); /* USART 1/A: /dev/ttyS0, DB9 */
-+#endif
-+ /* USART 2/unused: expansion connector */
-+ at32_map_usart(3, 2); /* USART 3/C: /dev/ttyS2, DB9 */
-+
-+ at32_setup_serial_console(0);
-+}
-+
-+static int __init atstk1003_init(void)
-+{
-+ /*
-+ * ATSTK1000 uses 32-bit SDRAM interface. Reserve the
-+ * SDRAM-specific pins so that nobody messes with them.
-+ */
-+ at32_reserve_pin(GPIO_PIN_PE(0)); /* DATA[16] */
-+ at32_reserve_pin(GPIO_PIN_PE(1)); /* DATA[17] */
-+ at32_reserve_pin(GPIO_PIN_PE(2)); /* DATA[18] */
-+ at32_reserve_pin(GPIO_PIN_PE(3)); /* DATA[19] */
-+ at32_reserve_pin(GPIO_PIN_PE(4)); /* DATA[20] */
-+ at32_reserve_pin(GPIO_PIN_PE(5)); /* DATA[21] */
-+ at32_reserve_pin(GPIO_PIN_PE(6)); /* DATA[22] */
-+ at32_reserve_pin(GPIO_PIN_PE(7)); /* DATA[23] */
-+ at32_reserve_pin(GPIO_PIN_PE(8)); /* DATA[24] */
-+ at32_reserve_pin(GPIO_PIN_PE(9)); /* DATA[25] */
-+ at32_reserve_pin(GPIO_PIN_PE(10)); /* DATA[26] */
-+ at32_reserve_pin(GPIO_PIN_PE(11)); /* DATA[27] */
-+ at32_reserve_pin(GPIO_PIN_PE(12)); /* DATA[28] */
-+ at32_reserve_pin(GPIO_PIN_PE(13)); /* DATA[29] */
-+ at32_reserve_pin(GPIO_PIN_PE(14)); /* DATA[30] */
-+ at32_reserve_pin(GPIO_PIN_PE(15)); /* DATA[31] */
-+ at32_reserve_pin(GPIO_PIN_PE(26)); /* SDCS */
-+
-+ at32_add_system_devices();
-+
-+#ifdef CONFIG_BOARD_ATSTK100X_SW2_CUSTOM
-+ at32_add_device_usart(1);
-+#else
-+ at32_add_device_usart(0);
-+#endif
-+ at32_add_device_usart(2);
-+
-+#ifndef CONFIG_BOARD_ATSTK100X_SW1_CUSTOM
-+ at32_add_device_spi(0, spi0_board_info, ARRAY_SIZE(spi0_board_info));
-+#endif
-+#ifdef CONFIG_BOARD_ATSTK100X_SPI1
-+ at32_add_device_spi(1, spi1_board_info, ARRAY_SIZE(spi1_board_info));
-+#endif
-+#ifndef CONFIG_BOARD_ATSTK100X_SW2_CUSTOM
-+ at32_add_device_mci(0, NULL);
-+#endif
-+ at32_add_device_usba(0, NULL);
-+#ifdef CONFIG_BOARD_ATSTK100X_ENABLE_AC97
-+ at32_add_device_ac97c(0);
-+#else
-+ at32_add_device_abdac(0);
-+#endif
-+#ifndef CONFIG_BOARD_ATSTK100X_SW3_CUSTOM
-+ at32_add_device_ssc(0, ATMEL_SSC_TX);
-+#endif
-+ at32_add_device_cf(0, 2, &cf0_data);
-+
-+ atstk1000_setup_j2_leds();
-+ atstk1003_setup_extdac();
-+
-+ return 0;
-+}
-+postcore_initcall(atstk1003_init);
-diff -Nrup linux-2.6.24/arch/avr32/boards/atstk1000/atstk1004.c linux-avr32/arch/avr32/boards/atstk1000/atstk1004.c
---- linux-2.6.24/arch/avr32/boards/atstk1000/atstk1004.c 1969-12-31 19:00:00.000000000 -0500
-+++ linux-avr32/arch/avr32/boards/atstk1000/atstk1004.c 2008-02-01 14:51:35.000000000 -0500
-@@ -0,0 +1,152 @@
-+/*
-+ * ATSTK1003 daughterboard-specific init code
-+ *
-+ * Copyright (C) 2007 Atmel Corporation
-+ *
-+ * This program is free software; you can redistribute it and/or modify
-+ * it under the terms of the GNU General Public License version 2 as
-+ * published by the Free Software Foundation.
-+ */
-+#include <linux/clk.h>
-+#include <linux/err.h>
-+#include <linux/init.h>
-+#include <linux/kernel.h>
-+#include <linux/platform_device.h>
-+#include <linux/string.h>
-+#include <linux/types.h>
-+
-+#include <linux/spi/at73c213.h>
-+#include <linux/spi/spi.h>
-+
-+#include <video/atmel_lcdc.h>
-+
-+#include <asm/setup.h>
-+
-+#include <asm/arch/at32ap700x.h>
-+#include <asm/arch/board.h>
-+#include <asm/arch/init.h>
-+#include <asm/arch/portmux.h>
-+
-+#include "atstk1000.h"
-+
-+#ifdef CONFIG_BOARD_ATSTK1000_EXTDAC
-+static struct at73c213_board_info at73c213_data = {
-+ .ssc_id = 0,
-+ .shortname = "AVR32 STK1000 external DAC",
-+};
-+#endif
-+
-+#ifndef CONFIG_BOARD_ATSTK100X_SW1_CUSTOM
-+static struct spi_board_info spi0_board_info[] __initdata = {
-+#ifdef CONFIG_BOARD_ATSTK1000_EXTDAC
-+ {
-+ /* AT73C213 */
-+ .modalias = "at73c213",
-+ .max_speed_hz = 200000,
-+ .chip_select = 0,
-+ .mode = SPI_MODE_1,
-+ .platform_data = &at73c213_data,
-+ },
-+#endif
-+ {
-+ /* QVGA display */
-+ .modalias = "ltv350qv",
-+ .max_speed_hz = 16000000,
-+ .chip_select = 1,
-+ .mode = SPI_MODE_3,
-+ },
-+};
-+#endif
-+
-+#ifdef CONFIG_BOARD_ATSTK100X_SPI1
-+static struct spi_board_info spi1_board_info[] __initdata = { {
-+ /* patch in custom entries here */
-+} };
-+#endif
-+
-+#ifdef CONFIG_BOARD_ATSTK1000_EXTDAC
-+static void __init atstk1004_setup_extdac(void)
-+{
-+ struct clk *gclk;
-+ struct clk *pll;
-+
-+ gclk = clk_get(NULL, "gclk0");
-+ if (IS_ERR(gclk))
-+ goto err_gclk;
-+ pll = clk_get(NULL, "pll0");
-+ if (IS_ERR(pll))
-+ goto err_pll;
-+
-+ if (clk_set_parent(gclk, pll)) {
-+ pr_debug("STK1000: failed to set pll0 as parent for DAC clock\n");
-+ goto err_set_clk;
-+ }
-+
-+ at32_select_periph(GPIO_PIN_PA(30), GPIO_PERIPH_A, 0);
-+ at73c213_data.dac_clk = gclk;
-+
-+err_set_clk:
-+ clk_put(pll);
-+err_pll:
-+ clk_put(gclk);
-+err_gclk:
-+ return;
-+}
-+#else
-+static void __init atstk1004_setup_extdac(void)
-+{
-+
-+}
-+#endif /* CONFIG_BOARD_ATSTK1000_EXTDAC */
-+
-+void __init setup_board(void)
-+{
-+#ifdef CONFIG_BOARD_ATSTK100X_SW2_CUSTOM
-+ at32_map_usart(0, 1); /* USART 0/B: /dev/ttyS1, IRDA */
-+#else
-+ at32_map_usart(1, 0); /* USART 1/A: /dev/ttyS0, DB9 */
-+#endif
-+ /* USART 2/unused: expansion connector */
-+ at32_map_usart(3, 2); /* USART 3/C: /dev/ttyS2, DB9 */
-+
-+ at32_setup_serial_console(0);
-+}
-+
-+static int __init atstk1004_init(void)
-+{
-+ at32_add_system_devices();
-+
-+#ifdef CONFIG_BOARD_ATSTK100X_SW2_CUSTOM
-+ at32_add_device_usart(1);
-+#else
-+ at32_add_device_usart(0);
-+#endif
-+ at32_add_device_usart(2);
-+
-+#ifndef CONFIG_BOARD_ATSTK100X_SW1_CUSTOM
-+ at32_add_device_spi(0, spi0_board_info, ARRAY_SIZE(spi0_board_info));
-+#endif
-+#ifdef CONFIG_BOARD_ATSTK100X_SPI1
-+ at32_add_device_spi(1, spi1_board_info, ARRAY_SIZE(spi1_board_info));
-+#endif
-+#ifndef CONFIG_BOARD_ATSTK100X_SW2_CUSTOM
-+ at32_add_device_mci(0, NULL);
-+#endif
-+ at32_add_device_lcdc(0, &atstk1000_lcdc_data,
-+ fbmem_start, fbmem_size);
-+ at32_add_device_usba(0, NULL);
-+#ifdef CONFIG_BOARD_ATSTK100X_ENABLE_AC97
-+ at32_add_device_ac97c(0);
-+#else
-+ at32_add_device_abdac(0);
-+#endif
-+#ifndef CONFIG_BOARD_ATSTK100X_SW3_CUSTOM
-+ at32_add_device_ssc(0, ATMEL_SSC_TX);
-+#endif
-+
-+ atstk1000_setup_j2_leds();
-+ atstk1004_setup_extdac();
-+
-+ return 0;
-+}
-+postcore_initcall(atstk1004_init);
-diff -Nrup linux-2.6.24/arch/avr32/boards/atstk1000/Kconfig linux-avr32/arch/avr32/boards/atstk1000/Kconfig
---- linux-2.6.24/arch/avr32/boards/atstk1000/Kconfig 2008-01-24 17:58:37.000000000 -0500
-+++ linux-avr32/arch/avr32/boards/atstk1000/Kconfig 2008-02-01 14:51:35.000000000 -0500
-@@ -1,34 +1,53 @@
- # STK1000 customization
-
--if BOARD_ATSTK1002
-+if BOARD_ATSTK1000
-
--config BOARD_ATSTK1002_CUSTOM
-- bool "Non-default STK-1002 jumper settings"
-+choice
-+ prompt "ATSTK1000 CPU daughterboard type"
-+ default BOARD_ATSTK1002
-+
-+config BOARD_ATSTK1002
-+ bool "ATSTK1002"
-+ select CPU_AT32AP7000
-+
-+config BOARD_ATSTK1003
-+ bool "ATSTK1003"
-+ select CPU_AT32AP7001
-+
-+config BOARD_ATSTK1004
-+ bool "ATSTK1004"
-+ select CPU_AT32AP7002
-+
-+endchoice
-+
-+
-+config BOARD_ATSTK100X_CUSTOM
-+ bool "Non-default STK1002/STK1003/STK1004 jumper settings"
- help
- You will normally leave the jumpers on the CPU card at their
- default settings. If you need to use certain peripherals,
- you will need to change some of those jumpers.
-
--if BOARD_ATSTK1002_CUSTOM
-+if BOARD_ATSTK100X_CUSTOM
-
--config BOARD_ATSTK1002_SW1_CUSTOM
-+config BOARD_ATSTK100X_SW1_CUSTOM
- bool "SW1: use SSC1 (not SPI0)"
- help
- This also prevents using the external DAC as an audio interface,
- and means you can't initialize the on-board QVGA display.
-
--config BOARD_ATSTK1002_SW2_CUSTOM
-+config BOARD_ATSTK100X_SW2_CUSTOM
- bool "SW2: use IRDA or TIMER0 (not UART-A, MMC/SD, and PS2-A)"
- help
- If you change this you'll want an updated boot loader putting
- the console on UART-C not UART-A.
-
--config BOARD_ATSTK1002_SW3_CUSTOM
-+config BOARD_ATSTK100X_SW3_CUSTOM
- bool "SW3: use TIMER1 (not SSC0 and GCLK)"
- help
- This also prevents using the external DAC as an audio interface.
-
--config BOARD_ATSTK1002_SW4_CUSTOM
-+config BOARD_ATSTK100X_SW4_CUSTOM
- bool "SW4: use ISI/Camera (not GPIOs, SPI1, and PS2-B)"
- help
- To use the camera interface you'll need a custom card (on the
-@@ -36,27 +55,29 @@ config BOARD_ATSTK1002_SW4_CUSTOM
-
- config BOARD_ATSTK1002_SW5_CUSTOM
- bool "SW5: use MACB1 (not LCDC)"
-+ depends on BOARD_ATSTK1002
-
- config BOARD_ATSTK1002_SW6_CUSTOM
- bool "SW6: more GPIOs (not MACB0)"
-+ depends on BOARD_ATSTK1002
-
- endif # custom
-
--config BOARD_ATSTK1002_SPI1
-+config BOARD_ATSTK100X_SPI1
- bool "Configure SPI1 controller"
-- depends on !BOARD_ATSTK1002_SW4_CUSTOM
-+ depends on !BOARD_ATSTK100X_SW4_CUSTOM
- help
- All the signals for the second SPI controller are available on
- GPIO lines and accessed through the J1 jumper block. Say "y"
- here to configure that SPI controller.
-
--config BOARD_ATSTK1002_J2_LED
-+config BOARD_ATSTK1000_J2_LED
- bool
-- default BOARD_ATSTK1002_J2_LED8 || BOARD_ATSTK1002_J2_RGB
-+ default BOARD_ATSTK1000_J2_LED8 || BOARD_ATSTK1000_J2_RGB
-
- choice
- prompt "LEDs connected to J2:"
-- depends on LEDS_GPIO && !BOARD_ATSTK1002_SW4_CUSTOM
-+ depends on LEDS_GPIO && !BOARD_ATSTK100X_SW4_CUSTOM
- optional
- help
- Select this if you have jumpered the J2 jumper block to the
-@@ -64,16 +85,64 @@ choice
- IDC cable. A default "heartbeat" trigger is provided, but
- you can of course override this.
-
--config BOARD_ATSTK1002_J2_LED8
-+config BOARD_ATSTK1000_J2_LED8
- bool "LED0..LED7"
- help
- Select this if J2 is jumpered to LED0..LED7 amber leds.
-
--config BOARD_ATSTK1002_J2_RGB
-+config BOARD_ATSTK1000_J2_RGB
- bool "RGB leds"
- help
- Select this if J2 is jumpered to the RGB leds.
-
- endchoice
-
--endif # stk 1002
-+config BOARD_ATSTK1000_EXTDAC
-+ bool
-+ depends on !BOARD_ATSTK100X_SW1_CUSTOM && !BOARD_ATSTK100X_SW3_CUSTOM
-+ default y
-+
-+config BOARD_ATSTK100X_ENABLE_AC97
-+ bool "Use AC97C instead of ABDAC"
-+ help
-+ Select this if you want to use the built-in AC97 controller
-+ instead of the built-in Audio Bitstream DAC. These share
-+ the same I/O pins on the AP7000, so both can't be enabled
-+ at the same time.
-+
-+ Note that the STK1000 kit doesn't ship with an AC97 codec on
-+ board, so say N unless you've got an expansion board with an
-+ AC97 codec on it that you want to use.
-+
-+config BOARD_ATSTK1000_CF_HACKS
-+ bool "ATSTK1000 CompactFlash hacks"
-+ depends on !BOARD_ATSTK100X_SW4_CUSTOM
-+ help
-+ Select this if you have re-routed the CompactFlash RESET and
-+ CD signals to GPIOs on your STK1000. This is necessary for
-+ reset and card detection to work properly, although some CF
-+ cards may be able to cope without reset.
-+
-+config BOARD_ATSTK1000_CF_RESET_PIN
-+ hex "CompactFlash RESET pin"
-+ default 0x30
-+ depends on BOARD_ATSTK1000_CF_HACKS
-+ help
-+ Select which GPIO pin to use for the CompactFlash RESET
-+ signal. This is specified as a hexadecimal number and should
-+ be defined as 0x20 * gpio_port + pin.
-+
-+ The default is 0x30, which is pin 16 on PIOB, aka GPIO14.
-+
-+config BOARD_ATSTK1000_CF_DETECT_PIN
-+ hex "CompactFlash DETECT pin"
-+ default 0x3e
-+ depends on BOARD_ATSTK1000_CF_HACKS
-+ help
-+ Select which GPIO pin to use for the CompactFlash CD
-+ signal. This is specified as a hexadecimal number and should
-+ be defined as 0x20 * gpio_port + pin.
-+
-+ The default is 0x3e, which is pin 30 on PIOB, aka GPIO15.
-+
-+endif # stk 1000
-diff -Nrup linux-2.6.24/arch/avr32/boards/atstk1000/Makefile linux-avr32/arch/avr32/boards/atstk1000/Makefile
---- linux-2.6.24/arch/avr32/boards/atstk1000/Makefile 2008-01-24 17:58:37.000000000 -0500
-+++ linux-avr32/arch/avr32/boards/atstk1000/Makefile 2008-02-01 14:51:35.000000000 -0500
-@@ -1,2 +1,4 @@
- obj-y += setup.o flash.o
- obj-$(CONFIG_BOARD_ATSTK1002) += atstk1002.o
-+obj-$(CONFIG_BOARD_ATSTK1003) += atstk1003.o
-+obj-$(CONFIG_BOARD_ATSTK1004) += atstk1004.o
-diff -Nrup linux-2.6.24/arch/avr32/boards/atstk1000/setup.c linux-avr32/arch/avr32/boards/atstk1000/setup.c
---- linux-2.6.24/arch/avr32/boards/atstk1000/setup.c 2008-01-24 17:58:37.000000000 -0500
-+++ linux-avr32/arch/avr32/boards/atstk1000/setup.c 2008-02-01 14:51:35.000000000 -0500
-@@ -10,13 +10,17 @@
- #include <linux/bootmem.h>
- #include <linux/fb.h>
- #include <linux/init.h>
-+#include <linux/platform_device.h>
- #include <linux/types.h>
- #include <linux/linkage.h>
-
- #include <video/atmel_lcdc.h>
-
- #include <asm/setup.h>
-+
-+#include <asm/arch/at32ap700x.h>
- #include <asm/arch/board.h>
-+#include <asm/arch/portmux.h>
-
- #include "atstk1000.h"
-
-@@ -61,3 +65,63 @@ struct atmel_lcdfb_info __initdata atstk
- .default_monspecs = &atstk1000_default_monspecs,
- .guard_time = 2,
- };
-+
-+#ifdef CONFIG_BOARD_ATSTK1000_J2_LED
-+#include <linux/leds.h>
-+
-+static struct gpio_led stk1000_j2_led[] = {
-+#ifdef CONFIG_BOARD_ATSTK1000_J2_LED8
-+#define LEDSTRING "J2 jumpered to LED8"
-+ { .name = "led0:amber", .gpio = GPIO_PIN_PB( 8), },
-+ { .name = "led1:amber", .gpio = GPIO_PIN_PB( 9), },
-+ { .name = "led2:amber", .gpio = GPIO_PIN_PB(10), },
-+ { .name = "led3:amber", .gpio = GPIO_PIN_PB(13), },
-+ { .name = "led4:amber", .gpio = GPIO_PIN_PB(14), },
-+ { .name = "led5:amber", .gpio = GPIO_PIN_PB(15), },
-+ { .name = "led6:amber", .gpio = GPIO_PIN_PB(16), },
-+ { .name = "led7:amber", .gpio = GPIO_PIN_PB(30),
-+ .default_trigger = "heartbeat", },
-+#else /* RGB */
-+#define LEDSTRING "J2 jumpered to RGB LEDs"
-+ { .name = "r1:red", .gpio = GPIO_PIN_PB( 8), },
-+ { .name = "g1:green", .gpio = GPIO_PIN_PB(10), },
-+ { .name = "b1:blue", .gpio = GPIO_PIN_PB(14), },
-+
-+ { .name = "r2:red", .gpio = GPIO_PIN_PB( 9),
-+ .default_trigger = "heartbeat", },
-+ { .name = "g2:green", .gpio = GPIO_PIN_PB(13), },
-+ { .name = "b2:blue", .gpio = GPIO_PIN_PB(15),
-+ .default_trigger = "heartbeat", },
-+ /* PB16, PB30 unused */
-+#endif
-+};
-+
-+static struct gpio_led_platform_data stk1000_j2_led_data = {
-+ .num_leds = ARRAY_SIZE(stk1000_j2_led),
-+ .leds = stk1000_j2_led,
-+};
-+
-+static struct platform_device stk1000_j2_led_dev = {
-+ .name = "leds-gpio",
-+ .id = 2, /* gpio block J2 */
-+ .dev = {
-+ .platform_data = &stk1000_j2_led_data,
-+ },
-+};
-+
-+void __init atstk1000_setup_j2_leds(void)
-+{
-+ unsigned i;
-+
-+ for (i = 0; i < ARRAY_SIZE(stk1000_j2_led); i++)
-+ at32_select_gpio(stk1000_j2_led[i].gpio, AT32_GPIOF_OUTPUT);
-+
-+ printk("STK1000: " LEDSTRING "\n");
-+ platform_device_register(&stk1000_j2_led_dev);
-+}
-+#else /* CONFIG_BOARD_ATSTK1000_J2_LED */
-+void __init atstk1000_setup_j2_leds(void)
-+{
-+
-+}
-+#endif /* CONFIG_BOARD_ATSTK1000_J2_LED */
-diff -Nrup linux-2.6.24/arch/avr32/configs/atngw100_defconfig linux-avr32/arch/avr32/configs/atngw100_defconfig
---- linux-2.6.24/arch/avr32/configs/atngw100_defconfig 2008-01-24 17:58:37.000000000 -0500
-+++ linux-avr32/arch/avr32/configs/atngw100_defconfig 2008-02-01 14:51:35.000000000 -0500
-@@ -1,46 +1,51 @@
- #
- # Automatically generated make config: don't edit
--# Linux kernel version: 2.6.22-rc5
--# Sat Jun 23 15:40:05 2007
-+# Linux kernel version: 2.6.24-rc7
-+# Wed Jan 9 23:20:41 2008
- #
- CONFIG_AVR32=y
- CONFIG_GENERIC_GPIO=y
- CONFIG_GENERIC_HARDIRQS=y
-+CONFIG_STACKTRACE_SUPPORT=y
-+CONFIG_LOCKDEP_SUPPORT=y
-+CONFIG_TRACE_IRQFLAGS_SUPPORT=y
- CONFIG_HARDIRQS_SW_RESEND=y
- CONFIG_GENERIC_IRQ_PROBE=y
- CONFIG_RWSEM_GENERIC_SPINLOCK=y
- CONFIG_GENERIC_TIME=y
-+# CONFIG_RWSEM_XCHGADD_ALGORITHM is not set
- # CONFIG_ARCH_HAS_ILOG2_U32 is not set
- # CONFIG_ARCH_HAS_ILOG2_U64 is not set
-+CONFIG_ARCH_SUPPORTS_OPROFILE=y
- CONFIG_GENERIC_HWEIGHT=y
- CONFIG_GENERIC_CALIBRATE_DELAY=y
- CONFIG_GENERIC_BUG=y
- CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
-
- #
--# Code maturity level options
-+# General setup
- #
- CONFIG_EXPERIMENTAL=y
- CONFIG_BROKEN_ON_SMP=y
- CONFIG_INIT_ENV_ARG_LIMIT=32
--
--#
--# General setup
--#
- CONFIG_LOCALVERSION=""
- # CONFIG_LOCALVERSION_AUTO is not set
- CONFIG_SWAP=y
- CONFIG_SYSVIPC=y
--# CONFIG_IPC_NS is not set
- CONFIG_SYSVIPC_SYSCTL=y
- CONFIG_POSIX_MQUEUE=y
- CONFIG_BSD_PROCESS_ACCT=y
- CONFIG_BSD_PROCESS_ACCT_V3=y
- # CONFIG_TASKSTATS is not set
--# CONFIG_UTS_NS is not set
-+# CONFIG_USER_NS is not set
-+# CONFIG_PID_NS is not set
- # CONFIG_AUDIT is not set
- # CONFIG_IKCONFIG is not set
- CONFIG_LOG_BUF_SHIFT=14
-+# CONFIG_CGROUPS is not set
-+CONFIG_FAIR_GROUP_SCHED=y
-+CONFIG_FAIR_USER_SCHED=y
-+# CONFIG_FAIR_CGROUP_SCHED is not set
- CONFIG_SYSFS_DEPRECATED=y
- # CONFIG_RELAY is not set
- CONFIG_BLK_DEV_INITRD=y
-@@ -61,35 +66,28 @@ CONFIG_FUTEX=y
- CONFIG_ANON_INODES=y
- CONFIG_EPOLL=y
- CONFIG_SIGNALFD=y
--CONFIG_TIMERFD=y
- CONFIG_EVENTFD=y
- CONFIG_SHMEM=y
- CONFIG_VM_EVENT_COUNTERS=y
--# CONFIG_SLUB_DEBUG is not set
-+CONFIG_SLUB_DEBUG=y
- # CONFIG_SLAB is not set
- CONFIG_SLUB=y
- # CONFIG_SLOB is not set
-+CONFIG_SLABINFO=y
- CONFIG_RT_MUTEXES=y
- # CONFIG_TINY_SHMEM is not set
- CONFIG_BASE_SMALL=1
--
--#
--# Loadable module support
--#
- CONFIG_MODULES=y
- CONFIG_MODULE_UNLOAD=y
- CONFIG_MODULE_FORCE_UNLOAD=y
- # CONFIG_MODVERSIONS is not set
- # CONFIG_MODULE_SRCVERSION_ALL is not set
- CONFIG_KMOD=y
--
--#
--# Block layer
--#
- CONFIG_BLOCK=y
- # CONFIG_LBD is not set
- # CONFIG_BLK_DEV_IO_TRACE is not set
- # CONFIG_LSF is not set
-+# CONFIG_BLK_DEV_BSG is not set
-
- #
- # IO Schedulers
-@@ -111,6 +109,7 @@ CONFIG_SUBARCH_AVR32B=y
- CONFIG_MMU=y
- CONFIG_PERFORMANCE_COUNTERS=y
- CONFIG_PLATFORM_AT32AP=y
-+CONFIG_CPU_AT32AP700X=y
- CONFIG_CPU_AT32AP7000=y
- # CONFIG_BOARD_ATSTK1000 is not set
- CONFIG_BOARD_ATNGW100=y
-@@ -119,9 +118,9 @@ CONFIG_LOADER_U_BOOT=y
- #
- # Atmel AVR32 AP options
- #
--# CONFIG_AP7000_32_BIT_SMC is not set
--CONFIG_AP7000_16_BIT_SMC=y
--# CONFIG_AP7000_8_BIT_SMC is not set
-+# CONFIG_AP700X_32_BIT_SMC is not set
-+CONFIG_AP700X_16_BIT_SMC=y
-+# CONFIG_AP700X_8_BIT_SMC is not set
- CONFIG_LOAD_ADDRESS=0x10000000
- CONFIG_ENTRY_ADDRESS=0x90000000
- CONFIG_PHYS_OFFSET=0x10000000
-@@ -141,9 +140,11 @@ CONFIG_FLATMEM_MANUAL=y
- CONFIG_FLATMEM=y
- CONFIG_FLAT_NODE_MEM_MAP=y
- # CONFIG_SPARSEMEM_STATIC is not set
-+# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
- CONFIG_SPLIT_PTLOCK_CPUS=4
- # CONFIG_RESOURCES_64BIT is not set
- CONFIG_ZONE_DMA_FLAG=0
-+CONFIG_VIRT_TO_BUS=y
- # CONFIG_OWNERSHIP_TRACE is not set
- # CONFIG_HZ_100 is not set
- CONFIG_HZ_250=y
-@@ -153,13 +154,31 @@ CONFIG_HZ=250
- CONFIG_CMDLINE=""
-
- #
--# Bus options
-+# Power management options
- #
--# CONFIG_ARCH_SUPPORTS_MSI is not set
-
- #
--# PCCARD (PCMCIA/CardBus) support
-+# CPU Frequency scaling
-+#
-+CONFIG_CPU_FREQ=y
-+CONFIG_CPU_FREQ_TABLE=y
-+# CONFIG_CPU_FREQ_DEBUG is not set
-+# CONFIG_CPU_FREQ_STAT is not set
-+CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE=y
-+# CONFIG_CPU_FREQ_DEFAULT_GOV_USERSPACE is not set
-+# CONFIG_CPU_FREQ_DEFAULT_GOV_ONDEMAND is not set
-+# CONFIG_CPU_FREQ_DEFAULT_GOV_CONSERVATIVE is not set
-+CONFIG_CPU_FREQ_GOV_PERFORMANCE=y
-+# CONFIG_CPU_FREQ_GOV_POWERSAVE is not set
-+CONFIG_CPU_FREQ_GOV_USERSPACE=y
-+CONFIG_CPU_FREQ_GOV_ONDEMAND=y
-+# CONFIG_CPU_FREQ_GOV_CONSERVATIVE is not set
-+CONFIG_CPU_FREQ_AT32AP=y
-+
-+#
-+# Bus options
- #
-+# CONFIG_ARCH_SUPPORTS_MSI is not set
- # CONFIG_PCCARD is not set
-
- #
-@@ -213,6 +232,7 @@ CONFIG_INET_TUNNEL=y
- CONFIG_INET_XFRM_MODE_TRANSPORT=y
- CONFIG_INET_XFRM_MODE_TUNNEL=y
- CONFIG_INET_XFRM_MODE_BEET=y
-+# CONFIG_INET_LRO is not set
- CONFIG_INET_DIAG=y
- CONFIG_INET_TCP_DIAG=y
- # CONFIG_TCP_CONG_ADVANCED is not set
-@@ -240,6 +260,7 @@ CONFIG_IPV6_SIT=y
- # CONFIG_NETWORK_SECMARK is not set
- CONFIG_NETFILTER=y
- # CONFIG_NETFILTER_DEBUG is not set
-+CONFIG_BRIDGE_NETFILTER=y
-
- #
- # Core Netfilter Configuration
-@@ -252,6 +273,7 @@ CONFIG_NF_CONNTRACK_MARK=y
- # CONFIG_NF_CONNTRACK_EVENTS is not set
- CONFIG_NF_CT_PROTO_GRE=m
- # CONFIG_NF_CT_PROTO_SCTP is not set
-+# CONFIG_NF_CT_PROTO_UDPLITE is not set
- CONFIG_NF_CONNTRACK_AMANDA=m
- CONFIG_NF_CONNTRACK_FTP=m
- CONFIG_NF_CONNTRACK_H323=m
-@@ -269,9 +291,11 @@ CONFIG_NETFILTER_XT_TARGET_MARK=m
- CONFIG_NETFILTER_XT_TARGET_NFQUEUE=m
- CONFIG_NETFILTER_XT_TARGET_NFLOG=m
- # CONFIG_NETFILTER_XT_TARGET_NOTRACK is not set
-+# CONFIG_NETFILTER_XT_TARGET_TRACE is not set
- CONFIG_NETFILTER_XT_TARGET_TCPMSS=m
- CONFIG_NETFILTER_XT_MATCH_COMMENT=m
- CONFIG_NETFILTER_XT_MATCH_CONNBYTES=m
-+# CONFIG_NETFILTER_XT_MATCH_CONNLIMIT is not set
- CONFIG_NETFILTER_XT_MATCH_CONNMARK=m
- CONFIG_NETFILTER_XT_MATCH_CONNTRACK=m
- # CONFIG_NETFILTER_XT_MATCH_DCCP is not set
-@@ -284,6 +308,7 @@ CONFIG_NETFILTER_XT_MATCH_MAC=m
- CONFIG_NETFILTER_XT_MATCH_MARK=m
- CONFIG_NETFILTER_XT_MATCH_POLICY=m
- CONFIG_NETFILTER_XT_MATCH_MULTIPORT=m
-+# CONFIG_NETFILTER_XT_MATCH_PHYSDEV is not set
- CONFIG_NETFILTER_XT_MATCH_PKTTYPE=m
- CONFIG_NETFILTER_XT_MATCH_QUOTA=m
- CONFIG_NETFILTER_XT_MATCH_REALM=m
-@@ -292,6 +317,8 @@ CONFIG_NETFILTER_XT_MATCH_STATE=m
- CONFIG_NETFILTER_XT_MATCH_STATISTIC=m
- CONFIG_NETFILTER_XT_MATCH_STRING=m
- CONFIG_NETFILTER_XT_MATCH_TCPMSS=m
-+# CONFIG_NETFILTER_XT_MATCH_TIME is not set
-+# CONFIG_NETFILTER_XT_MATCH_U32 is not set
- CONFIG_NETFILTER_XT_MATCH_HASHLIMIT=m
-
- #
-@@ -359,13 +386,19 @@ CONFIG_IP6_NF_TARGET_REJECT=m
- CONFIG_IP6_NF_MANGLE=m
- CONFIG_IP6_NF_TARGET_HL=m
- CONFIG_IP6_NF_RAW=m
-+
-+#
-+# Bridge: Netfilter Configuration
-+#
-+# CONFIG_BRIDGE_NF_EBTABLES is not set
- # CONFIG_IP_DCCP is not set
- # CONFIG_IP_SCTP is not set
- # CONFIG_TIPC is not set
- # CONFIG_ATM is not set
--# CONFIG_BRIDGE is not set
-+CONFIG_BRIDGE=m
- CONFIG_VLAN_8021Q=m
- # CONFIG_DECNET is not set
-+CONFIG_LLC=m
- # CONFIG_LLC2 is not set
- # CONFIG_IPX is not set
- # CONFIG_ATALK is not set
-@@ -373,10 +406,6 @@ CONFIG_VLAN_8021Q=m
- # CONFIG_LAPB is not set
- # CONFIG_ECONET is not set
- # CONFIG_WAN_ROUTER is not set
--
--#
--# QoS and/or fair queueing
--#
- # CONFIG_NET_SCHED is not set
- CONFIG_NET_CLS_ROUTE=y
-
-@@ -384,6 +413,7 @@ CONFIG_NET_CLS_ROUTE=y
- # Network testing
- #
- # CONFIG_NET_PKTGEN is not set
-+# CONFIG_NET_TCPPROBE is not set
- # CONFIG_HAMRADIO is not set
- # CONFIG_IRDA is not set
- # CONFIG_BT is not set
-@@ -397,6 +427,7 @@ CONFIG_NET_CLS_ROUTE=y
- # CONFIG_MAC80211 is not set
- # CONFIG_IEEE80211 is not set
- # CONFIG_RFKILL is not set
-+# CONFIG_NET_9P is not set
-
- #
- # Device Drivers
-@@ -405,16 +436,13 @@ CONFIG_NET_CLS_ROUTE=y
- #
- # Generic Driver Options
- #
-+CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
- CONFIG_STANDALONE=y
- # CONFIG_PREVENT_FIRMWARE_BUILD is not set
- # CONFIG_FW_LOADER is not set
- # CONFIG_DEBUG_DRIVER is not set
- # CONFIG_DEBUG_DEVRES is not set
- # CONFIG_SYS_HYPERVISOR is not set
--
--#
--# Connector - unified userspace <-> kernelspace linker
--#
- # CONFIG_CONNECTOR is not set
- CONFIG_MTD=y
- # CONFIG_MTD_DEBUG is not set
-@@ -434,6 +462,7 @@ CONFIG_MTD_BLOCK=y
- # CONFIG_INFTL is not set
- # CONFIG_RFD_FTL is not set
- # CONFIG_SSFDC is not set
-+# CONFIG_MTD_OOPS is not set
-
- #
- # RAM/ROM/Flash chip drivers
-@@ -493,20 +522,8 @@ CONFIG_MTD_DATAFLASH=y
- # UBI - Unsorted block images
- #
- # CONFIG_MTD_UBI is not set
--
--#
--# Parallel port support
--#
- # CONFIG_PARPORT is not set
--
--#
--# Plug and Play support
--#
--# CONFIG_PNPACPI is not set
--
--#
--# Block devices
--#
-+CONFIG_BLK_DEV=y
- # CONFIG_BLK_DEV_COW_COMMON is not set
- CONFIG_BLK_DEV_LOOP=m
- # CONFIG_BLK_DEV_CRYPTOLOOP is not set
-@@ -517,11 +534,7 @@ CONFIG_BLK_DEV_RAM_SIZE=4096
- CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024
- # CONFIG_CDROM_PKTCDVD is not set
- # CONFIG_ATA_OVER_ETH is not set
--
--#
--# Misc devices
--#
--# CONFIG_BLINK is not set
-+# CONFIG_MISC_DEVICES is not set
- # CONFIG_IDE is not set
-
- #
-@@ -529,30 +542,42 @@ CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024
- #
- # CONFIG_RAID_ATTRS is not set
- # CONFIG_SCSI is not set
-+# CONFIG_SCSI_DMA is not set
- # CONFIG_SCSI_NETLINK is not set
- # CONFIG_ATA is not set
--
--#
--# Multi-device support (RAID and LVM)
--#
- # CONFIG_MD is not set
--
--#
--# Network device support
--#
- CONFIG_NETDEVICES=y
-+# CONFIG_NETDEVICES_MULTIQUEUE is not set
- # CONFIG_DUMMY is not set
- # CONFIG_BONDING is not set
-+# CONFIG_MACVLAN is not set
- # CONFIG_EQUALIZER is not set
- CONFIG_TUN=m
--# CONFIG_PHYLIB is not set
-+# CONFIG_VETH is not set
-+CONFIG_PHYLIB=y
-
- #
--# Ethernet (10 or 100Mbit)
-+# MII PHY device drivers
- #
-+# CONFIG_MARVELL_PHY is not set
-+# CONFIG_DAVICOM_PHY is not set
-+# CONFIG_QSEMI_PHY is not set
-+# CONFIG_LXT_PHY is not set
-+# CONFIG_CICADA_PHY is not set
-+# CONFIG_VITESSE_PHY is not set
-+# CONFIG_SMSC_PHY is not set
-+# CONFIG_BROADCOM_PHY is not set
-+# CONFIG_ICPLUS_PHY is not set
-+# CONFIG_FIXED_PHY is not set
-+# CONFIG_MDIO_BITBANG is not set
- CONFIG_NET_ETHERNET=y
--CONFIG_MII=y
-+# CONFIG_MII is not set
- CONFIG_MACB=y
-+# CONFIG_IBM_NEW_EMAC_ZMII is not set
-+# CONFIG_IBM_NEW_EMAC_RGMII is not set
-+# CONFIG_IBM_NEW_EMAC_TAH is not set
-+# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
-+# CONFIG_B44 is not set
- # CONFIG_NETDEV_1000 is not set
- # CONFIG_NETDEV_10000 is not set
-
-@@ -571,21 +596,14 @@ CONFIG_PPP_DEFLATE=m
- CONFIG_PPP_BSDCOMP=m
- CONFIG_PPP_MPPE=m
- CONFIG_PPPOE=m
-+# CONFIG_PPPOL2TP is not set
- # CONFIG_SLIP is not set
- CONFIG_SLHC=m
- # CONFIG_SHAPER is not set
- # CONFIG_NETCONSOLE is not set
- # CONFIG_NETPOLL is not set
- # CONFIG_NET_POLL_CONTROLLER is not set
--
--#
--# ISDN subsystem
--#
- # CONFIG_ISDN is not set
--
--#
--# Telephony Support
--#
- # CONFIG_PHONE is not set
-
- #
-@@ -620,23 +638,50 @@ CONFIG_SERIAL_CORE=y
- CONFIG_SERIAL_CORE_CONSOLE=y
- CONFIG_UNIX98_PTYS=y
- # CONFIG_LEGACY_PTYS is not set
--
--#
--# IPMI
--#
- # CONFIG_IPMI_HANDLER is not set
--# CONFIG_WATCHDOG is not set
- # CONFIG_HW_RANDOM is not set
- # CONFIG_RTC is not set
- # CONFIG_GEN_RTC is not set
- # CONFIG_R3964 is not set
- # CONFIG_RAW_DRIVER is not set
--
--#
--# TPM devices
--#
- # CONFIG_TCG_TPM is not set
--# CONFIG_I2C is not set
-+CONFIG_I2C=m
-+CONFIG_I2C_BOARDINFO=y
-+CONFIG_I2C_CHARDEV=m
-+
-+#
-+# I2C Algorithms
-+#
-+CONFIG_I2C_ALGOBIT=m
-+# CONFIG_I2C_ALGOPCF is not set
-+# CONFIG_I2C_ALGOPCA is not set
-+
-+#
-+# I2C Hardware Bus support
-+#
-+CONFIG_I2C_GPIO=m
-+# CONFIG_I2C_OCORES is not set
-+# CONFIG_I2C_PARPORT_LIGHT is not set
-+# CONFIG_I2C_SIMTEC is not set
-+# CONFIG_I2C_TAOS_EVM is not set
-+# CONFIG_I2C_STUB is not set
-+
-+#
-+# Miscellaneous I2C Chip support
-+#
-+# CONFIG_SENSORS_DS1337 is not set
-+# CONFIG_SENSORS_DS1374 is not set
-+# CONFIG_DS1682 is not set
-+# CONFIG_SENSORS_EEPROM is not set
-+# CONFIG_SENSORS_PCF8574 is not set
-+# CONFIG_SENSORS_PCA9539 is not set
-+# CONFIG_SENSORS_PCF8591 is not set
-+# CONFIG_SENSORS_MAX6875 is not set
-+# CONFIG_SENSORS_TSL2550 is not set
-+# CONFIG_I2C_DEBUG_CORE is not set
-+# CONFIG_I2C_DEBUG_ALGO is not set
-+# CONFIG_I2C_DEBUG_BUS is not set
-+# CONFIG_I2C_DEBUG_CHIP is not set
-
- #
- # SPI support
-@@ -655,13 +700,25 @@ CONFIG_SPI_ATMEL=y
- # SPI Protocol Masters
- #
- # CONFIG_SPI_AT25 is not set
--# CONFIG_SPI_SPIDEV is not set
-+CONFIG_SPI_SPIDEV=m
-+# CONFIG_SPI_TLE62X0 is not set
-+# CONFIG_W1 is not set
-+# CONFIG_POWER_SUPPLY is not set
-+# CONFIG_HWMON is not set
-+CONFIG_WATCHDOG=y
-+# CONFIG_WATCHDOG_NOWAYOUT is not set
-
- #
--# Dallas's 1-wire bus
-+# Watchdog Device Drivers
- #
--# CONFIG_W1 is not set
--# CONFIG_HWMON is not set
-+# CONFIG_SOFT_WATCHDOG is not set
-+CONFIG_AT32AP700X_WDT=y
-+
-+#
-+# Sonics Silicon Backplane
-+#
-+CONFIG_SSB_POSSIBLE=y
-+# CONFIG_SSB is not set
-
- #
- # Multifunction device drivers
-@@ -678,23 +735,21 @@ CONFIG_SPI_ATMEL=y
- #
- # Graphics support
- #
-+# CONFIG_VGASTATE is not set
-+# CONFIG_VIDEO_OUTPUT_CONTROL is not set
-+# CONFIG_FB is not set
- # CONFIG_BACKLIGHT_LCD_SUPPORT is not set
-
- #
- # Display device support
- #
- # CONFIG_DISPLAY_SUPPORT is not set
--# CONFIG_VGASTATE is not set
--# CONFIG_FB is not set
-
- #
- # Sound
- #
- # CONFIG_SOUND is not set
--
--#
--# USB support
--#
-+CONFIG_USB_SUPPORT=y
- # CONFIG_USB_ARCH_HAS_HCD is not set
- # CONFIG_USB_ARCH_HAS_OHCI is not set
- # CONFIG_USB_ARCH_HAS_EHCI is not set
-@@ -706,12 +761,47 @@ CONFIG_SPI_ATMEL=y
- #
- # USB Gadget Support
- #
--# CONFIG_USB_GADGET is not set
--# CONFIG_MMC is not set
-+CONFIG_USB_GADGET=y
-+# CONFIG_USB_GADGET_DEBUG is not set
-+# CONFIG_USB_GADGET_DEBUG_FILES is not set
-+CONFIG_USB_GADGET_SELECTED=y
-+# CONFIG_USB_GADGET_AMD5536UDC is not set
-+CONFIG_USB_GADGET_ATMEL_USBA=y
-+CONFIG_USB_ATMEL_USBA=y
-+# CONFIG_USB_GADGET_FSL_USB2 is not set
-+# CONFIG_USB_GADGET_NET2280 is not set
-+# CONFIG_USB_GADGET_PXA2XX is not set
-+# CONFIG_USB_GADGET_M66592 is not set
-+# CONFIG_USB_GADGET_GOKU is not set
-+# CONFIG_USB_GADGET_LH7A40X is not set
-+# CONFIG_USB_GADGET_OMAP is not set
-+# CONFIG_USB_GADGET_S3C2410 is not set
-+# CONFIG_USB_GADGET_AT91 is not set
-+# CONFIG_USB_GADGET_DUMMY_HCD is not set
-+CONFIG_USB_GADGET_DUALSPEED=y
-+CONFIG_USB_ZERO=m
-+CONFIG_USB_ETH=m
-+CONFIG_USB_ETH_RNDIS=y
-+CONFIG_USB_GADGETFS=m
-+CONFIG_USB_FILE_STORAGE=m
-+# CONFIG_USB_FILE_STORAGE_TEST is not set
-+CONFIG_USB_G_SERIAL=m
-+# CONFIG_USB_MIDI_GADGET is not set
-+CONFIG_MMC=m
-+# CONFIG_MMC_DEBUG is not set
-+# CONFIG_MMC_UNSAFE_RESUME is not set
-+
-+#
-+# MMC/SD Card Drivers
-+#
-+CONFIG_MMC_BLOCK=m
-+CONFIG_MMC_BLOCK_BOUNCE=y
-+# CONFIG_SDIO_UART is not set
-
- #
--# LED devices
-+# MMC/SD Host Controller Drivers
- #
-+CONFIG_MMC_SPI=m
- CONFIG_NEW_LEDS=y
- CONFIG_LEDS_CLASS=y
-
-@@ -726,53 +816,71 @@ CONFIG_LEDS_GPIO=y
- CONFIG_LEDS_TRIGGERS=y
- CONFIG_LEDS_TRIGGER_TIMER=y
- CONFIG_LEDS_TRIGGER_HEARTBEAT=y
--
-+CONFIG_RTC_LIB=y
-+CONFIG_RTC_CLASS=y
-+CONFIG_RTC_HCTOSYS=y
-+CONFIG_RTC_HCTOSYS_DEVICE="rtc0"
-+# CONFIG_RTC_DEBUG is not set
-
- #
--# LED drivers
--#
--
--#
--# LED Triggers
--#
--
--#
--# InfiniBand support
-+# RTC interfaces
- #
-+CONFIG_RTC_INTF_SYSFS=y
-+CONFIG_RTC_INTF_PROC=y
-+CONFIG_RTC_INTF_DEV=y
-+# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
-+# CONFIG_RTC_DRV_TEST is not set
-
- #
--# EDAC - error detection and reporting (RAS) (EXPERIMENTAL)
-+# I2C RTC drivers
- #
-+# CONFIG_RTC_DRV_DS1307 is not set
-+# CONFIG_RTC_DRV_DS1374 is not set
-+# CONFIG_RTC_DRV_DS1672 is not set
-+# CONFIG_RTC_DRV_MAX6900 is not set
-+# CONFIG_RTC_DRV_RS5C372 is not set
-+# CONFIG_RTC_DRV_ISL1208 is not set
-+# CONFIG_RTC_DRV_X1205 is not set
-+# CONFIG_RTC_DRV_PCF8563 is not set
-+# CONFIG_RTC_DRV_PCF8583 is not set
-+# CONFIG_RTC_DRV_M41T80 is not set
-
- #
--# Real Time Clock
-+# SPI RTC drivers
- #
--# CONFIG_RTC_CLASS is not set
-+# CONFIG_RTC_DRV_RS5C348 is not set
-+# CONFIG_RTC_DRV_MAX6902 is not set
-
- #
--# DMA Engine support
-+# Platform RTC drivers
- #
--# CONFIG_DMA_ENGINE is not set
-+# CONFIG_RTC_DRV_DS1553 is not set
-+# CONFIG_RTC_DRV_STK17TA8 is not set
-+# CONFIG_RTC_DRV_DS1742 is not set
-+# CONFIG_RTC_DRV_M48T86 is not set
-+# CONFIG_RTC_DRV_M48T59 is not set
-+# CONFIG_RTC_DRV_V3020 is not set
-
- #
--# DMA Clients
-+# on-CPU RTC drivers
- #
-+CONFIG_RTC_DRV_AT32AP700X=y
-
- #
--# DMA Devices
-+# Userspace I/O
- #
-+# CONFIG_UIO is not set
-
- #
- # File systems
- #
--CONFIG_EXT2_FS=y
-+CONFIG_EXT2_FS=m
- # CONFIG_EXT2_FS_XATTR is not set
- # CONFIG_EXT2_FS_XIP is not set
--CONFIG_EXT3_FS=y
-+CONFIG_EXT3_FS=m
- # CONFIG_EXT3_FS_XATTR is not set
- # CONFIG_EXT4DEV_FS is not set
--CONFIG_JBD=y
--# CONFIG_JBD_DEBUG is not set
-+CONFIG_JBD=m
- # CONFIG_REISERFS_FS is not set
- # CONFIG_JFS_FS is not set
- # CONFIG_FS_POSIX_ACL is not set
-@@ -781,7 +889,8 @@ CONFIG_JBD=y
- # CONFIG_OCFS2_FS is not set
- # CONFIG_MINIX_FS is not set
- # CONFIG_ROMFS_FS is not set
--# CONFIG_INOTIFY is not set
-+CONFIG_INOTIFY=y
-+CONFIG_INOTIFY_USER=y
- # CONFIG_QUOTA is not set
- # CONFIG_DNOTIFY is not set
- # CONFIG_AUTOFS_FS is not set
-@@ -814,8 +923,7 @@ CONFIG_SYSFS=y
- CONFIG_TMPFS=y
- # CONFIG_TMPFS_POSIX_ACL is not set
- # CONFIG_HUGETLB_PAGE is not set
--CONFIG_RAMFS=y
--CONFIG_CONFIGFS_FS=y
-+CONFIG_CONFIGFS_FS=m
-
- #
- # Miscellaneous filesystems
-@@ -830,10 +938,12 @@ CONFIG_CONFIGFS_FS=y
- CONFIG_JFFS2_FS=y
- CONFIG_JFFS2_FS_DEBUG=0
- CONFIG_JFFS2_FS_WRITEBUFFER=y
-+# CONFIG_JFFS2_FS_WBUF_VERIFY is not set
- # CONFIG_JFFS2_SUMMARY is not set
- # CONFIG_JFFS2_FS_XATTR is not set
- # CONFIG_JFFS2_COMPRESSION_OPTIONS is not set
- CONFIG_JFFS2_ZLIB=y
-+# CONFIG_JFFS2_LZO is not set
- CONFIG_JFFS2_RTIME=y
- # CONFIG_JFFS2_RUBIN is not set
- # CONFIG_CRAMFS is not set
-@@ -842,19 +952,21 @@ CONFIG_JFFS2_RTIME=y
- # CONFIG_QNX4FS_FS is not set
- # CONFIG_SYSV_FS is not set
- # CONFIG_UFS_FS is not set
--
--#
--# Network File Systems
--#
-+CONFIG_NETWORK_FILESYSTEMS=y
- CONFIG_NFS_FS=y
- CONFIG_NFS_V3=y
- # CONFIG_NFS_V3_ACL is not set
- # CONFIG_NFS_V4 is not set
- # CONFIG_NFS_DIRECTIO is not set
--# CONFIG_NFSD is not set
-+CONFIG_NFSD=m
-+CONFIG_NFSD_V3=y
-+# CONFIG_NFSD_V3_ACL is not set
-+# CONFIG_NFSD_V4 is not set
-+CONFIG_NFSD_TCP=y
- CONFIG_ROOT_NFS=y
- CONFIG_LOCKD=y
- CONFIG_LOCKD_V4=y
-+CONFIG_EXPORTFS=m
- CONFIG_NFS_COMMON=y
- CONFIG_SUNRPC=y
- # CONFIG_SUNRPC_BIND34 is not set
-@@ -871,23 +983,18 @@ CONFIG_CIFS=m
- # CONFIG_NCP_FS is not set
- # CONFIG_CODA_FS is not set
- # CONFIG_AFS_FS is not set
--# CONFIG_9P_FS is not set
-
- #
- # Partition Types
- #
- # CONFIG_PARTITION_ADVANCED is not set
- CONFIG_MSDOS_PARTITION=y
--
--#
--# Native Language Support
--#
--CONFIG_NLS=y
-+CONFIG_NLS=m
- CONFIG_NLS_DEFAULT="iso8859-1"
--# CONFIG_NLS_CODEPAGE_437 is not set
-+CONFIG_NLS_CODEPAGE_437=m
- # CONFIG_NLS_CODEPAGE_737 is not set
- # CONFIG_NLS_CODEPAGE_775 is not set
--CONFIG_NLS_CODEPAGE_850=y
-+CONFIG_NLS_CODEPAGE_850=m
- # CONFIG_NLS_CODEPAGE_852 is not set
- # CONFIG_NLS_CODEPAGE_855 is not set
- # CONFIG_NLS_CODEPAGE_857 is not set
-@@ -908,7 +1015,7 @@ CONFIG_NLS_CODEPAGE_850=y
- # CONFIG_NLS_CODEPAGE_1250 is not set
- # CONFIG_NLS_CODEPAGE_1251 is not set
- # CONFIG_NLS_ASCII is not set
--CONFIG_NLS_ISO8859_1=y
-+CONFIG_NLS_ISO8859_1=m
- # CONFIG_NLS_ISO8859_2 is not set
- # CONFIG_NLS_ISO8859_3 is not set
- # CONFIG_NLS_ISO8859_4 is not set
-@@ -921,18 +1028,19 @@ CONFIG_NLS_ISO8859_1=y
- # CONFIG_NLS_ISO8859_15 is not set
- # CONFIG_NLS_KOI8_R is not set
- # CONFIG_NLS_KOI8_U is not set
--CONFIG_NLS_UTF8=y
--
--#
--# Distributed Lock Manager
--#
-+CONFIG_NLS_UTF8=m
- # CONFIG_DLM is not set
-+CONFIG_INSTRUMENTATION=y
-+CONFIG_PROFILING=y
-+CONFIG_OPROFILE=m
-+CONFIG_KPROBES=y
-+# CONFIG_MARKERS is not set
-
- #
- # Kernel hacking
- #
--CONFIG_TRACE_IRQFLAGS_SUPPORT=y
- # CONFIG_PRINTK_TIME is not set
-+CONFIG_ENABLE_WARN_DEPRECATED=y
- CONFIG_ENABLE_MUST_CHECK=y
- CONFIG_MAGIC_SYSRQ=y
- # CONFIG_UNUSED_SYMBOLS is not set
-@@ -941,12 +1049,17 @@ CONFIG_MAGIC_SYSRQ=y
- CONFIG_DEBUG_KERNEL=y
- # CONFIG_DEBUG_SHIRQ is not set
- CONFIG_DETECT_SOFTLOCKUP=y
-+CONFIG_SCHED_DEBUG=y
- # CONFIG_SCHEDSTATS is not set
- # CONFIG_TIMER_STATS is not set
-+# CONFIG_SLUB_DEBUG_ON is not set
- # CONFIG_DEBUG_RT_MUTEXES is not set
- # CONFIG_RT_MUTEX_TESTER is not set
- # CONFIG_DEBUG_SPINLOCK is not set
- # CONFIG_DEBUG_MUTEXES is not set
-+# CONFIG_DEBUG_LOCK_ALLOC is not set
-+# CONFIG_PROVE_LOCKING is not set
-+# CONFIG_LOCK_STAT is not set
- # CONFIG_DEBUG_SPINLOCK_SLEEP is not set
- # CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
- # CONFIG_DEBUG_KOBJECT is not set
-@@ -954,21 +1067,21 @@ CONFIG_DEBUG_BUGVERBOSE=y
- # CONFIG_DEBUG_INFO is not set
- # CONFIG_DEBUG_VM is not set
- # CONFIG_DEBUG_LIST is not set
-+# CONFIG_DEBUG_SG is not set
- CONFIG_FRAME_POINTER=y
- # CONFIG_FORCED_INLINING is not set
-+# CONFIG_BOOT_PRINTK_DELAY is not set
- # CONFIG_RCU_TORTURE_TEST is not set
-+# CONFIG_LKDTM is not set
- # CONFIG_FAULT_INJECTION is not set
--# CONFIG_KPROBES is not set
-+# CONFIG_SAMPLES is not set
-
- #
- # Security options
- #
- # CONFIG_KEYS is not set
- # CONFIG_SECURITY is not set
--
--#
--# Cryptographic options
--#
-+# CONFIG_SECURITY_FILE_CAPABILITIES is not set
- CONFIG_CRYPTO=y
- CONFIG_CRYPTO_ALGAPI=y
- CONFIG_CRYPTO_BLKCIPHER=y
-@@ -989,6 +1102,7 @@ CONFIG_CRYPTO_ECB=m
- CONFIG_CRYPTO_CBC=y
- CONFIG_CRYPTO_PCBC=m
- # CONFIG_CRYPTO_LRW is not set
-+# CONFIG_CRYPTO_XTS is not set
- # CONFIG_CRYPTO_CRYPTD is not set
- CONFIG_CRYPTO_DES=y
- # CONFIG_CRYPTO_FCRYPT is not set
-@@ -1002,15 +1116,14 @@ CONFIG_CRYPTO_DES=y
- CONFIG_CRYPTO_ARC4=m
- # CONFIG_CRYPTO_KHAZAD is not set
- # CONFIG_CRYPTO_ANUBIS is not set
-+# CONFIG_CRYPTO_SEED is not set
- CONFIG_CRYPTO_DEFLATE=y
- # CONFIG_CRYPTO_MICHAEL_MIC is not set
- # CONFIG_CRYPTO_CRC32C is not set
- # CONFIG_CRYPTO_CAMELLIA is not set
- # CONFIG_CRYPTO_TEST is not set
--
--#
--# Hardware crypto devices
--#
-+# CONFIG_CRYPTO_AUTHENC is not set
-+CONFIG_CRYPTO_HW=y
-
- #
- # Library routines
-@@ -1018,8 +1131,9 @@ CONFIG_CRYPTO_DEFLATE=y
- CONFIG_BITREVERSE=y
- CONFIG_CRC_CCITT=m
- # CONFIG_CRC16 is not set
--# CONFIG_CRC_ITU_T is not set
-+CONFIG_CRC_ITU_T=m
- CONFIG_CRC32=y
-+CONFIG_CRC7=m
- # CONFIG_LIBCRC32C is not set
- CONFIG_ZLIB_INFLATE=y
- CONFIG_ZLIB_DEFLATE=y
-diff -Nrup linux-2.6.24/arch/avr32/configs/atstk1002_defconfig linux-avr32/arch/avr32/configs/atstk1002_defconfig
---- linux-2.6.24/arch/avr32/configs/atstk1002_defconfig 2008-01-24 17:58:37.000000000 -0500
-+++ linux-avr32/arch/avr32/configs/atstk1002_defconfig 2008-02-01 14:51:35.000000000 -0500
-@@ -1,48 +1,48 @@
- #
- # Automatically generated make config: don't edit
--# Linux kernel version: 2.6.22-rc5
--# Sat Jun 23 15:32:08 2007
-+# Linux kernel version: 2.6.24-rc7
-+# Wed Jan 9 23:07:43 2008
- #
- CONFIG_AVR32=y
- CONFIG_GENERIC_GPIO=y
- CONFIG_GENERIC_HARDIRQS=y
-+CONFIG_STACKTRACE_SUPPORT=y
-+CONFIG_LOCKDEP_SUPPORT=y
-+CONFIG_TRACE_IRQFLAGS_SUPPORT=y
- CONFIG_HARDIRQS_SW_RESEND=y
- CONFIG_GENERIC_IRQ_PROBE=y
- CONFIG_RWSEM_GENERIC_SPINLOCK=y
- CONFIG_GENERIC_TIME=y
-+# CONFIG_RWSEM_XCHGADD_ALGORITHM is not set
- # CONFIG_ARCH_HAS_ILOG2_U32 is not set
- # CONFIG_ARCH_HAS_ILOG2_U64 is not set
-+CONFIG_ARCH_SUPPORTS_OPROFILE=y
- CONFIG_GENERIC_HWEIGHT=y
- CONFIG_GENERIC_CALIBRATE_DELAY=y
- CONFIG_GENERIC_BUG=y
- CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
-
- #
--# Code maturity level options
-+# General setup
- #
- CONFIG_EXPERIMENTAL=y
- CONFIG_BROKEN_ON_SMP=y
- CONFIG_INIT_ENV_ARG_LIMIT=32
--
--#
--# General setup
--#
- CONFIG_LOCALVERSION=""
- # CONFIG_LOCALVERSION_AUTO is not set
- CONFIG_SWAP=y
- CONFIG_SYSVIPC=y
--# CONFIG_IPC_NS is not set
- CONFIG_SYSVIPC_SYSCTL=y
- CONFIG_POSIX_MQUEUE=y
--CONFIG_BSD_PROCESS_ACCT=y
--CONFIG_BSD_PROCESS_ACCT_V3=y
--CONFIG_TASKSTATS=y
--CONFIG_TASK_DELAY_ACCT=y
--# CONFIG_TASK_XACCT is not set
--# CONFIG_UTS_NS is not set
--CONFIG_AUDIT=y
-+# CONFIG_BSD_PROCESS_ACCT is not set
-+# CONFIG_TASKSTATS is not set
-+# CONFIG_USER_NS is not set
-+# CONFIG_PID_NS is not set
-+# CONFIG_AUDIT is not set
- # CONFIG_IKCONFIG is not set
- CONFIG_LOG_BUF_SHIFT=14
-+# CONFIG_CGROUPS is not set
-+# CONFIG_FAIR_GROUP_SCHED is not set
- CONFIG_SYSFS_DEPRECATED=y
- CONFIG_RELAY=y
- CONFIG_BLK_DEV_INITRD=y
-@@ -63,35 +63,28 @@ CONFIG_FUTEX=y
- CONFIG_ANON_INODES=y
- CONFIG_EPOLL=y
- CONFIG_SIGNALFD=y
--CONFIG_TIMERFD=y
- CONFIG_EVENTFD=y
- CONFIG_SHMEM=y
- CONFIG_VM_EVENT_COUNTERS=y
--# CONFIG_SLUB_DEBUG is not set
-+CONFIG_SLUB_DEBUG=y
- # CONFIG_SLAB is not set
- CONFIG_SLUB=y
- # CONFIG_SLOB is not set
-+CONFIG_SLABINFO=y
- CONFIG_RT_MUTEXES=y
- # CONFIG_TINY_SHMEM is not set
- CONFIG_BASE_SMALL=1
--
--#
--# Loadable module support
--#
- CONFIG_MODULES=y
- CONFIG_MODULE_UNLOAD=y
- # CONFIG_MODULE_FORCE_UNLOAD is not set
- # CONFIG_MODVERSIONS is not set
- # CONFIG_MODULE_SRCVERSION_ALL is not set
- # CONFIG_KMOD is not set
--
--#
--# Block layer
--#
- CONFIG_BLOCK=y
- # CONFIG_LBD is not set
- # CONFIG_BLK_DEV_IO_TRACE is not set
- # CONFIG_LSF is not set
-+# CONFIG_BLK_DEV_BSG is not set
-
- #
- # IO Schedulers
-@@ -99,12 +92,12 @@ CONFIG_BLOCK=y
- CONFIG_IOSCHED_NOOP=y
- # CONFIG_IOSCHED_AS is not set
- # CONFIG_IOSCHED_DEADLINE is not set
--# CONFIG_IOSCHED_CFQ is not set
-+CONFIG_IOSCHED_CFQ=y
- # CONFIG_DEFAULT_AS is not set
- # CONFIG_DEFAULT_DEADLINE is not set
--# CONFIG_DEFAULT_CFQ is not set
--CONFIG_DEFAULT_NOOP=y
--CONFIG_DEFAULT_IOSCHED="noop"
-+CONFIG_DEFAULT_CFQ=y
-+# CONFIG_DEFAULT_NOOP is not set
-+CONFIG_DEFAULT_IOSCHED="cfq"
-
- #
- # System Type and features
-@@ -113,18 +106,27 @@ CONFIG_SUBARCH_AVR32B=y
- CONFIG_MMU=y
- CONFIG_PERFORMANCE_COUNTERS=y
- CONFIG_PLATFORM_AT32AP=y
-+CONFIG_CPU_AT32AP700X=y
- CONFIG_CPU_AT32AP7000=y
--CONFIG_BOARD_ATSTK1002=y
- CONFIG_BOARD_ATSTK1000=y
- # CONFIG_BOARD_ATNGW100 is not set
-+CONFIG_BOARD_ATSTK1002=y
-+# CONFIG_BOARD_ATSTK1003 is not set
-+# CONFIG_BOARD_ATSTK1004 is not set
-+# CONFIG_BOARD_ATSTK100X_CUSTOM is not set
-+# CONFIG_BOARD_ATSTK100X_SPI1 is not set
-+# CONFIG_BOARD_ATSTK1000_J2_LED is not set
-+# CONFIG_BOARD_ATSTK1000_J2_LED8 is not set
-+# CONFIG_BOARD_ATSTK1000_J2_RGB is not set
-+CONFIG_BOARD_ATSTK1000_EXTDAC=y
- CONFIG_LOADER_U_BOOT=y
-
- #
- # Atmel AVR32 AP options
- #
--# CONFIG_AP7000_32_BIT_SMC is not set
--CONFIG_AP7000_16_BIT_SMC=y
--# CONFIG_AP7000_8_BIT_SMC is not set
-+# CONFIG_AP700X_32_BIT_SMC is not set
-+CONFIG_AP700X_16_BIT_SMC=y
-+# CONFIG_AP700X_8_BIT_SMC is not set
- CONFIG_LOAD_ADDRESS=0x10000000
- CONFIG_ENTRY_ADDRESS=0x90000000
- CONFIG_PHYS_OFFSET=0x10000000
-@@ -144,9 +146,11 @@ CONFIG_FLATMEM_MANUAL=y
- CONFIG_FLATMEM=y
- CONFIG_FLAT_NODE_MEM_MAP=y
- # CONFIG_SPARSEMEM_STATIC is not set
-+# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
- CONFIG_SPLIT_PTLOCK_CPUS=4
- # CONFIG_RESOURCES_64BIT is not set
- CONFIG_ZONE_DMA_FLAG=0
-+CONFIG_VIRT_TO_BUS=y
- # CONFIG_OWNERSHIP_TRACE is not set
- # CONFIG_HZ_100 is not set
- CONFIG_HZ_250=y
-@@ -156,13 +160,31 @@ CONFIG_HZ=250
- CONFIG_CMDLINE=""
-
- #
--# Bus options
-+# Power management options
- #
--# CONFIG_ARCH_SUPPORTS_MSI is not set
-
- #
--# PCCARD (PCMCIA/CardBus) support
-+# CPU Frequency scaling
-+#
-+CONFIG_CPU_FREQ=y
-+CONFIG_CPU_FREQ_TABLE=y
-+# CONFIG_CPU_FREQ_DEBUG is not set
-+# CONFIG_CPU_FREQ_STAT is not set
-+CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE=y
-+# CONFIG_CPU_FREQ_DEFAULT_GOV_USERSPACE is not set
-+# CONFIG_CPU_FREQ_DEFAULT_GOV_ONDEMAND is not set
-+# CONFIG_CPU_FREQ_DEFAULT_GOV_CONSERVATIVE is not set
-+CONFIG_CPU_FREQ_GOV_PERFORMANCE=y
-+# CONFIG_CPU_FREQ_GOV_POWERSAVE is not set
-+CONFIG_CPU_FREQ_GOV_USERSPACE=y
-+CONFIG_CPU_FREQ_GOV_ONDEMAND=y
-+# CONFIG_CPU_FREQ_GOV_CONSERVATIVE is not set
-+CONFIG_CPU_FREQ_AT32AP=y
-+
-+#
-+# Bus options
- #
-+# CONFIG_ARCH_SUPPORTS_MSI is not set
- # CONFIG_PCCARD is not set
-
- #
-@@ -182,7 +204,12 @@ CONFIG_NET=y
- CONFIG_PACKET=y
- CONFIG_PACKET_MMAP=y
- CONFIG_UNIX=y
--# CONFIG_NET_KEY is not set
-+CONFIG_XFRM=y
-+CONFIG_XFRM_USER=m
-+# CONFIG_XFRM_SUB_POLICY is not set
-+# CONFIG_XFRM_MIGRATE is not set
-+CONFIG_NET_KEY=m
-+# CONFIG_NET_KEY_MIGRATE is not set
- CONFIG_INET=y
- # CONFIG_IP_MULTICAST is not set
- # CONFIG_IP_ADVANCED_ROUTER is not set
-@@ -191,36 +218,52 @@ CONFIG_IP_PNP=y
- CONFIG_IP_PNP_DHCP=y
- # CONFIG_IP_PNP_BOOTP is not set
- # CONFIG_IP_PNP_RARP is not set
--# CONFIG_NET_IPIP is not set
--# CONFIG_NET_IPGRE is not set
-+CONFIG_NET_IPIP=m
-+CONFIG_NET_IPGRE=m
- # CONFIG_ARPD is not set
- # CONFIG_SYN_COOKIES is not set
--# CONFIG_INET_AH is not set
--# CONFIG_INET_ESP is not set
-+CONFIG_INET_AH=m
-+CONFIG_INET_ESP=m
- # CONFIG_INET_IPCOMP is not set
- # CONFIG_INET_XFRM_TUNNEL is not set
--# CONFIG_INET_TUNNEL is not set
--# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
--# CONFIG_INET_XFRM_MODE_TUNNEL is not set
--# CONFIG_INET_XFRM_MODE_BEET is not set
-+CONFIG_INET_TUNNEL=m
-+CONFIG_INET_XFRM_MODE_TRANSPORT=m
-+CONFIG_INET_XFRM_MODE_TUNNEL=m
-+CONFIG_INET_XFRM_MODE_BEET=m
-+# CONFIG_INET_LRO is not set
- CONFIG_INET_DIAG=y
- CONFIG_INET_TCP_DIAG=y
- # CONFIG_TCP_CONG_ADVANCED is not set
- CONFIG_TCP_CONG_CUBIC=y
- CONFIG_DEFAULT_TCP_CONG="cubic"
- # CONFIG_TCP_MD5SIG is not set
--# CONFIG_IPV6 is not set
--# CONFIG_INET6_XFRM_TUNNEL is not set
--# CONFIG_INET6_TUNNEL is not set
-+CONFIG_IPV6=m
-+# CONFIG_IPV6_PRIVACY is not set
-+# CONFIG_IPV6_ROUTER_PREF is not set
-+# CONFIG_IPV6_OPTIMISTIC_DAD is not set
-+CONFIG_INET6_AH=m
-+CONFIG_INET6_ESP=m
-+CONFIG_INET6_IPCOMP=m
-+# CONFIG_IPV6_MIP6 is not set
-+CONFIG_INET6_XFRM_TUNNEL=m
-+CONFIG_INET6_TUNNEL=m
-+CONFIG_INET6_XFRM_MODE_TRANSPORT=m
-+CONFIG_INET6_XFRM_MODE_TUNNEL=m
-+CONFIG_INET6_XFRM_MODE_BEET=m
-+# CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION is not set
-+CONFIG_IPV6_SIT=m
-+CONFIG_IPV6_TUNNEL=m
-+# CONFIG_IPV6_MULTIPLE_TABLES is not set
- # CONFIG_NETWORK_SECMARK is not set
- # CONFIG_NETFILTER is not set
- # CONFIG_IP_DCCP is not set
- # CONFIG_IP_SCTP is not set
- # CONFIG_TIPC is not set
- # CONFIG_ATM is not set
--# CONFIG_BRIDGE is not set
-+CONFIG_BRIDGE=m
- # CONFIG_VLAN_8021Q is not set
- # CONFIG_DECNET is not set
-+CONFIG_LLC=m
- # CONFIG_LLC2 is not set
- # CONFIG_IPX is not set
- # CONFIG_ATALK is not set
-@@ -228,16 +271,13 @@ CONFIG_DEFAULT_TCP_CONG="cubic"
- # CONFIG_LAPB is not set
- # CONFIG_ECONET is not set
- # CONFIG_WAN_ROUTER is not set
--
--#
--# QoS and/or fair queueing
--#
- # CONFIG_NET_SCHED is not set
-
- #
- # Network testing
- #
- # CONFIG_NET_PKTGEN is not set
-+# CONFIG_NET_TCPPROBE is not set
- # CONFIG_HAMRADIO is not set
- # CONFIG_IRDA is not set
- # CONFIG_BT is not set
-@@ -251,6 +291,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic"
- # CONFIG_MAC80211 is not set
- # CONFIG_IEEE80211 is not set
- # CONFIG_RFKILL is not set
-+# CONFIG_NET_9P is not set
-
- #
- # Device Drivers
-@@ -259,16 +300,13 @@ CONFIG_DEFAULT_TCP_CONG="cubic"
- #
- # Generic Driver Options
- #
-+CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
- CONFIG_STANDALONE=y
- # CONFIG_PREVENT_FIRMWARE_BUILD is not set
- # CONFIG_FW_LOADER is not set
- # CONFIG_DEBUG_DRIVER is not set
- # CONFIG_DEBUG_DEVRES is not set
- # CONFIG_SYS_HYPERVISOR is not set
--
--#
--# Connector - unified userspace <-> kernelspace linker
--#
- # CONFIG_CONNECTOR is not set
- CONFIG_MTD=y
- # CONFIG_MTD_DEBUG is not set
-@@ -288,6 +326,7 @@ CONFIG_MTD_BLOCK=y
- # CONFIG_INFTL is not set
- # CONFIG_RFD_FTL is not set
- # CONFIG_SSFDC is not set
-+# CONFIG_MTD_OOPS is not set
-
- #
- # RAM/ROM/Flash chip drivers
-@@ -327,6 +366,8 @@ CONFIG_MTD_PHYSMAP_BANKWIDTH=2
- #
- # Self-contained MTD device drivers
- #
-+CONFIG_MTD_DATAFLASH=m
-+CONFIG_MTD_M25P80=m
- # CONFIG_MTD_SLRAM is not set
- # CONFIG_MTD_PHRAM is not set
- # CONFIG_MTD_MTDRAM is not set
-@@ -345,20 +386,8 @@ CONFIG_MTD_PHYSMAP_BANKWIDTH=2
- # UBI - Unsorted block images
- #
- # CONFIG_MTD_UBI is not set
--
--#
--# Parallel port support
--#
- # CONFIG_PARPORT is not set
--
--#
--# Plug and Play support
--#
--# CONFIG_PNPACPI is not set
--
--#
--# Block devices
--#
-+CONFIG_BLK_DEV=y
- # CONFIG_BLK_DEV_COW_COMMON is not set
- CONFIG_BLK_DEV_LOOP=m
- # CONFIG_BLK_DEV_CRYPTOLOOP is not set
-@@ -369,42 +398,87 @@ CONFIG_BLK_DEV_RAM_SIZE=4096
- CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024
- # CONFIG_CDROM_PKTCDVD is not set
- # CONFIG_ATA_OVER_ETH is not set
--
--#
--# Misc devices
--#
--# CONFIG_BLINK is not set
-+CONFIG_MISC_DEVICES=y
-+# CONFIG_EEPROM_93CX6 is not set
-+CONFIG_ATMEL_SSC=m
- # CONFIG_IDE is not set
-
- #
- # SCSI device support
- #
- # CONFIG_RAID_ATTRS is not set
--# CONFIG_SCSI is not set
-+CONFIG_SCSI=m
-+CONFIG_SCSI_DMA=y
-+# CONFIG_SCSI_TGT is not set
- # CONFIG_SCSI_NETLINK is not set
--# CONFIG_ATA is not set
-+# CONFIG_SCSI_PROC_FS is not set
-
- #
--# Multi-device support (RAID and LVM)
-+# SCSI support type (disk, tape, CD-ROM)
- #
--# CONFIG_MD is not set
-+CONFIG_BLK_DEV_SD=m
-+# CONFIG_CHR_DEV_ST is not set
-+# CONFIG_CHR_DEV_OSST is not set
-+CONFIG_BLK_DEV_SR=m
-+# CONFIG_BLK_DEV_SR_VENDOR is not set
-+# CONFIG_CHR_DEV_SG is not set
-+# CONFIG_CHR_DEV_SCH is not set
-+
-+#
-+# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
-+#
-+# CONFIG_SCSI_MULTI_LUN is not set
-+# CONFIG_SCSI_CONSTANTS is not set
-+# CONFIG_SCSI_LOGGING is not set
-+# CONFIG_SCSI_SCAN_ASYNC is not set
-+CONFIG_SCSI_WAIT_SCAN=m
-
- #
--# Network device support
-+# SCSI Transports
- #
-+# CONFIG_SCSI_SPI_ATTRS is not set
-+# CONFIG_SCSI_FC_ATTRS is not set
-+# CONFIG_SCSI_ISCSI_ATTRS is not set
-+# CONFIG_SCSI_SAS_LIBSAS is not set
-+# CONFIG_SCSI_SRP_ATTRS is not set
-+# CONFIG_SCSI_LOWLEVEL is not set
-+CONFIG_ATA=m
-+# CONFIG_ATA_NONSTANDARD is not set
-+CONFIG_PATA_AT32=m
-+# CONFIG_PATA_PLATFORM is not set
-+# CONFIG_MD is not set
- CONFIG_NETDEVICES=y
--CONFIG_DUMMY=y
-+# CONFIG_NETDEVICES_MULTIQUEUE is not set
-+# CONFIG_DUMMY is not set
- # CONFIG_BONDING is not set
-+# CONFIG_MACVLAN is not set
- # CONFIG_EQUALIZER is not set
- CONFIG_TUN=m
--# CONFIG_PHYLIB is not set
-+# CONFIG_VETH is not set
-+CONFIG_PHYLIB=y
-
- #
--# Ethernet (10 or 100Mbit)
-+# MII PHY device drivers
- #
-+# CONFIG_MARVELL_PHY is not set
-+# CONFIG_DAVICOM_PHY is not set
-+# CONFIG_QSEMI_PHY is not set
-+# CONFIG_LXT_PHY is not set
-+# CONFIG_CICADA_PHY is not set
-+# CONFIG_VITESSE_PHY is not set
-+# CONFIG_SMSC_PHY is not set
-+# CONFIG_BROADCOM_PHY is not set
-+# CONFIG_ICPLUS_PHY is not set
-+# CONFIG_FIXED_PHY is not set
-+# CONFIG_MDIO_BITBANG is not set
- CONFIG_NET_ETHERNET=y
--CONFIG_MII=y
-+# CONFIG_MII is not set
- CONFIG_MACB=y
-+# CONFIG_IBM_NEW_EMAC_ZMII is not set
-+# CONFIG_IBM_NEW_EMAC_RGMII is not set
-+# CONFIG_IBM_NEW_EMAC_TAH is not set
-+# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
-+# CONFIG_B44 is not set
- # CONFIG_NETDEV_1000 is not set
- # CONFIG_NETDEV_10000 is not set
-
-@@ -423,27 +497,54 @@ CONFIG_PPP_DEFLATE=m
- CONFIG_PPP_BSDCOMP=m
- # CONFIG_PPP_MPPE is not set
- # CONFIG_PPPOE is not set
-+# CONFIG_PPPOL2TP is not set
- # CONFIG_SLIP is not set
- CONFIG_SLHC=m
- # CONFIG_SHAPER is not set
- # CONFIG_NETCONSOLE is not set
- # CONFIG_NETPOLL is not set
- # CONFIG_NET_POLL_CONTROLLER is not set
--
--#
--# ISDN subsystem
--#
- # CONFIG_ISDN is not set
--
--#
--# Telephony Support
--#
- # CONFIG_PHONE is not set
-
- #
- # Input device support
- #
--# CONFIG_INPUT is not set
-+CONFIG_INPUT=m
-+# CONFIG_INPUT_FF_MEMLESS is not set
-+CONFIG_INPUT_POLLDEV=m
-+
-+#
-+# Userland interfaces
-+#
-+CONFIG_INPUT_MOUSEDEV=m
-+CONFIG_INPUT_MOUSEDEV_PSAUX=y
-+CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
-+CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
-+# CONFIG_INPUT_JOYDEV is not set
-+CONFIG_INPUT_EVDEV=m
-+# CONFIG_INPUT_EVBUG is not set
-+
-+#
-+# Input Device Drivers
-+#
-+CONFIG_INPUT_KEYBOARD=y
-+# CONFIG_KEYBOARD_ATKBD is not set
-+# CONFIG_KEYBOARD_SUNKBD is not set
-+# CONFIG_KEYBOARD_LKKBD is not set
-+# CONFIG_KEYBOARD_XTKBD is not set
-+# CONFIG_KEYBOARD_NEWTON is not set
-+# CONFIG_KEYBOARD_STOWAWAY is not set
-+CONFIG_KEYBOARD_GPIO=m
-+CONFIG_INPUT_MOUSE=y
-+# CONFIG_MOUSE_PS2 is not set
-+# CONFIG_MOUSE_SERIAL is not set
-+# CONFIG_MOUSE_VSXXXAA is not set
-+CONFIG_MOUSE_GPIO=m
-+# CONFIG_INPUT_JOYSTICK is not set
-+# CONFIG_INPUT_TABLET is not set
-+# CONFIG_INPUT_TOUCHSCREEN is not set
-+# CONFIG_INPUT_MISC is not set
-
- #
- # Hardware I/O ports
-@@ -472,35 +573,87 @@ CONFIG_SERIAL_CORE=y
- CONFIG_SERIAL_CORE_CONSOLE=y
- CONFIG_UNIX98_PTYS=y
- # CONFIG_LEGACY_PTYS is not set
--
--#
--# IPMI
--#
- # CONFIG_IPMI_HANDLER is not set
--# CONFIG_WATCHDOG is not set
- # CONFIG_HW_RANDOM is not set
- # CONFIG_RTC is not set
- # CONFIG_GEN_RTC is not set
- # CONFIG_R3964 is not set
- # CONFIG_RAW_DRIVER is not set
-+# CONFIG_TCG_TPM is not set
-+CONFIG_I2C=m
-+CONFIG_I2C_BOARDINFO=y
-+CONFIG_I2C_CHARDEV=m
-+
-+#
-+# I2C Algorithms
-+#
-+CONFIG_I2C_ALGOBIT=m
-+# CONFIG_I2C_ALGOPCF is not set
-+# CONFIG_I2C_ALGOPCA is not set
-+
-+#
-+# I2C Hardware Bus support
-+#
-+CONFIG_I2C_GPIO=m
-+# CONFIG_I2C_OCORES is not set
-+# CONFIG_I2C_PARPORT_LIGHT is not set
-+# CONFIG_I2C_SIMTEC is not set
-+# CONFIG_I2C_TAOS_EVM is not set
-+# CONFIG_I2C_STUB is not set
-+
-+#
-+# Miscellaneous I2C Chip support
-+#
-+# CONFIG_SENSORS_DS1337 is not set
-+# CONFIG_SENSORS_DS1374 is not set
-+# CONFIG_DS1682 is not set
-+# CONFIG_SENSORS_EEPROM is not set
-+# CONFIG_SENSORS_PCF8574 is not set
-+# CONFIG_SENSORS_PCA9539 is not set
-+# CONFIG_SENSORS_PCF8591 is not set
-+# CONFIG_SENSORS_MAX6875 is not set
-+# CONFIG_SENSORS_TSL2550 is not set
-+# CONFIG_I2C_DEBUG_CORE is not set
-+# CONFIG_I2C_DEBUG_ALGO is not set
-+# CONFIG_I2C_DEBUG_BUS is not set
-+# CONFIG_I2C_DEBUG_CHIP is not set
-
- #
--# TPM devices
-+# SPI support
- #
--# CONFIG_TCG_TPM is not set
--# CONFIG_I2C is not set
-+CONFIG_SPI=y
-+# CONFIG_SPI_DEBUG is not set
-+CONFIG_SPI_MASTER=y
-
- #
--# SPI support
-+# SPI Master Controller Drivers
- #
--# CONFIG_SPI is not set
--# CONFIG_SPI_MASTER is not set
-+CONFIG_SPI_ATMEL=y
-+# CONFIG_SPI_BITBANG is not set
-
- #
--# Dallas's 1-wire bus
-+# SPI Protocol Masters
- #
-+# CONFIG_SPI_AT25 is not set
-+CONFIG_SPI_SPIDEV=m
-+# CONFIG_SPI_TLE62X0 is not set
- # CONFIG_W1 is not set
-+# CONFIG_POWER_SUPPLY is not set
- # CONFIG_HWMON is not set
-+CONFIG_WATCHDOG=y
-+# CONFIG_WATCHDOG_NOWAYOUT is not set
-+
-+#
-+# Watchdog Device Drivers
-+#
-+# CONFIG_SOFT_WATCHDOG is not set
-+CONFIG_AT32AP700X_WDT=y
-+
-+#
-+# Sonics Silicon Backplane
-+#
-+CONFIG_SSB_POSSIBLE=y
-+# CONFIG_SSB is not set
-
- #
- # Multifunction device drivers
-@@ -517,23 +670,94 @@ CONFIG_UNIX98_PTYS=y
- #
- # Graphics support
- #
--# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
-+# CONFIG_VGASTATE is not set
-+# CONFIG_VIDEO_OUTPUT_CONTROL is not set
-+CONFIG_FB=y
-+# CONFIG_FIRMWARE_EDID is not set
-+# CONFIG_FB_DDC is not set
-+CONFIG_FB_CFB_FILLRECT=y
-+CONFIG_FB_CFB_COPYAREA=y
-+CONFIG_FB_CFB_IMAGEBLIT=y
-+# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set
-+# CONFIG_FB_SYS_FILLRECT is not set
-+# CONFIG_FB_SYS_COPYAREA is not set
-+# CONFIG_FB_SYS_IMAGEBLIT is not set
-+# CONFIG_FB_SYS_FOPS is not set
-+CONFIG_FB_DEFERRED_IO=y
-+# CONFIG_FB_SVGALIB is not set
-+# CONFIG_FB_MACMODES is not set
-+# CONFIG_FB_BACKLIGHT is not set
-+# CONFIG_FB_MODE_HELPERS is not set
-+# CONFIG_FB_TILEBLITTING is not set
-+
-+#
-+# Frame buffer hardware drivers
-+#
-+# CONFIG_FB_S1D13XXX is not set
-+CONFIG_FB_ATMEL=y
-+# CONFIG_FB_VIRTUAL is not set
-+CONFIG_BACKLIGHT_LCD_SUPPORT=y
-+CONFIG_LCD_CLASS_DEVICE=y
-+CONFIG_LCD_LTV350QV=y
-+# CONFIG_BACKLIGHT_CLASS_DEVICE is not set
-
- #
- # Display device support
- #
- # CONFIG_DISPLAY_SUPPORT is not set
--# CONFIG_VGASTATE is not set
--# CONFIG_FB is not set
-+# CONFIG_LOGO is not set
-
- #
- # Sound
- #
--# CONFIG_SOUND is not set
-+CONFIG_SOUND=m
-+
-+#
-+# Advanced Linux Sound Architecture
-+#
-+CONFIG_SND=m
-+CONFIG_SND_TIMER=m
-+CONFIG_SND_PCM=m
-+# CONFIG_SND_SEQUENCER is not set
-+CONFIG_SND_OSSEMUL=y
-+CONFIG_SND_MIXER_OSS=m
-+CONFIG_SND_PCM_OSS=m
-+CONFIG_SND_PCM_OSS_PLUGINS=y
-+# CONFIG_SND_DYNAMIC_MINORS is not set
-+# CONFIG_SND_SUPPORT_OLD_API is not set
-+# CONFIG_SND_VERBOSE_PROCFS is not set
-+# CONFIG_SND_VERBOSE_PRINTK is not set
-+# CONFIG_SND_DEBUG is not set
-+
-+#
-+# Generic devices
-+#
-+# CONFIG_SND_DUMMY is not set
-+# CONFIG_SND_MTPAV is not set
-+# CONFIG_SND_SERIAL_U16550 is not set
-+# CONFIG_SND_MPU401 is not set
-+
-+#
-+# SPI devices
-+#
-+CONFIG_SND_AT73C213=m
-+CONFIG_SND_AT73C213_TARGET_BITRATE=48000
-+
-+#
-+# System on Chip audio support
-+#
-+# CONFIG_SND_SOC is not set
-+
-+#
-+# SoC Audio support for SuperH
-+#
-
- #
--# USB support
-+# Open Sound System
- #
-+# CONFIG_SOUND_PRIME is not set
-+# CONFIG_HID_SUPPORT is not set
-+CONFIG_USB_SUPPORT=y
- # CONFIG_USB_ARCH_HAS_HCD is not set
- # CONFIG_USB_ARCH_HAS_OHCI is not set
- # CONFIG_USB_ARCH_HAS_EHCI is not set
-@@ -545,47 +769,116 @@ CONFIG_UNIX98_PTYS=y
- #
- # USB Gadget Support
- #
--# CONFIG_USB_GADGET is not set
--# CONFIG_MMC is not set
--
--#
--# LED devices
--#
--# CONFIG_NEW_LEDS is not set
-+CONFIG_USB_GADGET=y
-+# CONFIG_USB_GADGET_DEBUG is not set
-+# CONFIG_USB_GADGET_DEBUG_FILES is not set
-+# CONFIG_USB_GADGET_DEBUG_FS is not set
-+CONFIG_USB_GADGET_SELECTED=y
-+# CONFIG_USB_GADGET_AMD5536UDC is not set
-+CONFIG_USB_GADGET_ATMEL_USBA=y
-+CONFIG_USB_ATMEL_USBA=y
-+# CONFIG_USB_GADGET_FSL_USB2 is not set
-+# CONFIG_USB_GADGET_NET2280 is not set
-+# CONFIG_USB_GADGET_PXA2XX is not set
-+# CONFIG_USB_GADGET_M66592 is not set
-+# CONFIG_USB_GADGET_GOKU is not set
-+# CONFIG_USB_GADGET_LH7A40X is not set
-+# CONFIG_USB_GADGET_OMAP is not set
-+# CONFIG_USB_GADGET_S3C2410 is not set
-+# CONFIG_USB_GADGET_AT91 is not set
-+# CONFIG_USB_GADGET_DUMMY_HCD is not set
-+CONFIG_USB_GADGET_DUALSPEED=y
-+CONFIG_USB_ZERO=m
-+CONFIG_USB_ETH=m
-+CONFIG_USB_ETH_RNDIS=y
-+CONFIG_USB_GADGETFS=m
-+CONFIG_USB_FILE_STORAGE=m
-+# CONFIG_USB_FILE_STORAGE_TEST is not set
-+CONFIG_USB_G_SERIAL=m
-+# CONFIG_USB_MIDI_GADGET is not set
-+CONFIG_MMC=m
-+# CONFIG_MMC_DEBUG is not set
-+# CONFIG_MMC_UNSAFE_RESUME is not set
-+
-+#
-+# MMC/SD Card Drivers
-+#
-+CONFIG_MMC_BLOCK=m
-+CONFIG_MMC_BLOCK_BOUNCE=y
-+# CONFIG_SDIO_UART is not set
-+
-+#
-+# MMC/SD Host Controller Drivers
-+#
-+CONFIG_MMC_SPI=m
-+CONFIG_NEW_LEDS=y
-+CONFIG_LEDS_CLASS=m
-
- #
- # LED drivers
- #
-+CONFIG_LEDS_GPIO=m
-
- #
- # LED Triggers
- #
-+CONFIG_LEDS_TRIGGERS=y
-+CONFIG_LEDS_TRIGGER_TIMER=m
-+CONFIG_LEDS_TRIGGER_HEARTBEAT=m
-+CONFIG_RTC_LIB=y
-+CONFIG_RTC_CLASS=y
-+CONFIG_RTC_HCTOSYS=y
-+CONFIG_RTC_HCTOSYS_DEVICE="rtc0"
-+# CONFIG_RTC_DEBUG is not set
-
- #
--# InfiniBand support
-+# RTC interfaces
- #
-+CONFIG_RTC_INTF_SYSFS=y
-+CONFIG_RTC_INTF_PROC=y
-+CONFIG_RTC_INTF_DEV=y
-+# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
-+# CONFIG_RTC_DRV_TEST is not set
-
- #
--# EDAC - error detection and reporting (RAS) (EXPERIMENTAL)
-+# I2C RTC drivers
- #
-+# CONFIG_RTC_DRV_DS1307 is not set
-+# CONFIG_RTC_DRV_DS1374 is not set
-+# CONFIG_RTC_DRV_DS1672 is not set
-+# CONFIG_RTC_DRV_MAX6900 is not set
-+# CONFIG_RTC_DRV_RS5C372 is not set
-+# CONFIG_RTC_DRV_ISL1208 is not set
-+# CONFIG_RTC_DRV_X1205 is not set
-+# CONFIG_RTC_DRV_PCF8563 is not set
-+# CONFIG_RTC_DRV_PCF8583 is not set
-+# CONFIG_RTC_DRV_M41T80 is not set
-
- #
--# Real Time Clock
-+# SPI RTC drivers
- #
--# CONFIG_RTC_CLASS is not set
-+# CONFIG_RTC_DRV_RS5C348 is not set
-+# CONFIG_RTC_DRV_MAX6902 is not set
-
- #
--# DMA Engine support
-+# Platform RTC drivers
- #
--# CONFIG_DMA_ENGINE is not set
-+# CONFIG_RTC_DRV_DS1553 is not set
-+# CONFIG_RTC_DRV_STK17TA8 is not set
-+# CONFIG_RTC_DRV_DS1742 is not set
-+# CONFIG_RTC_DRV_M48T86 is not set
-+# CONFIG_RTC_DRV_M48T59 is not set
-+# CONFIG_RTC_DRV_V3020 is not set
-
- #
--# DMA Clients
-+# on-CPU RTC drivers
- #
-+CONFIG_RTC_DRV_AT32AP700X=y
-
- #
--# DMA Devices
-+# Userspace I/O
- #
-+# CONFIG_UIO is not set
-
- #
- # File systems
-@@ -593,8 +886,11 @@ CONFIG_UNIX98_PTYS=y
- CONFIG_EXT2_FS=m
- # CONFIG_EXT2_FS_XATTR is not set
- # CONFIG_EXT2_FS_XIP is not set
--# CONFIG_EXT3_FS is not set
-+CONFIG_EXT3_FS=m
-+# CONFIG_EXT3_FS_XATTR is not set
- # CONFIG_EXT4DEV_FS is not set
-+CONFIG_JBD=m
-+# CONFIG_JBD_DEBUG is not set
- # CONFIG_REISERFS_FS is not set
- # CONFIG_JFS_FS is not set
- # CONFIG_FS_POSIX_ACL is not set
-@@ -609,7 +905,7 @@ CONFIG_INOTIFY_USER=y
- # CONFIG_DNOTIFY is not set
- # CONFIG_AUTOFS_FS is not set
- # CONFIG_AUTOFS4_FS is not set
--# CONFIG_FUSE_FS is not set
-+CONFIG_FUSE_FS=m
-
- #
- # CD-ROM/DVD Filesystems
-@@ -637,8 +933,7 @@ CONFIG_SYSFS=y
- CONFIG_TMPFS=y
- # CONFIG_TMPFS_POSIX_ACL is not set
- # CONFIG_HUGETLB_PAGE is not set
--CONFIG_RAMFS=y
--CONFIG_CONFIGFS_FS=m
-+# CONFIG_CONFIGFS_FS is not set
-
- #
- # Miscellaneous filesystems
-@@ -652,11 +947,12 @@ CONFIG_CONFIGFS_FS=m
- # CONFIG_EFS_FS is not set
- CONFIG_JFFS2_FS=y
- CONFIG_JFFS2_FS_DEBUG=0
--CONFIG_JFFS2_FS_WRITEBUFFER=y
-+# CONFIG_JFFS2_FS_WRITEBUFFER is not set
- # CONFIG_JFFS2_SUMMARY is not set
- # CONFIG_JFFS2_FS_XATTR is not set
- # CONFIG_JFFS2_COMPRESSION_OPTIONS is not set
- CONFIG_JFFS2_ZLIB=y
-+# CONFIG_JFFS2_LZO is not set
- CONFIG_JFFS2_RTIME=y
- # CONFIG_JFFS2_RUBIN is not set
- # CONFIG_CRAMFS is not set
-@@ -665,10 +961,7 @@ CONFIG_JFFS2_RTIME=y
- # CONFIG_QNX4FS_FS is not set
- # CONFIG_SYSV_FS is not set
- # CONFIG_UFS_FS is not set
--
--#
--# Network File Systems
--#
-+CONFIG_NETWORK_FILESYSTEMS=y
- CONFIG_NFS_FS=y
- CONFIG_NFS_V3=y
- # CONFIG_NFS_V3_ACL is not set
-@@ -688,17 +981,12 @@ CONFIG_SUNRPC=y
- # CONFIG_NCP_FS is not set
- # CONFIG_CODA_FS is not set
- # CONFIG_AFS_FS is not set
--# CONFIG_9P_FS is not set
-
- #
- # Partition Types
- #
- # CONFIG_PARTITION_ADVANCED is not set
- CONFIG_MSDOS_PARTITION=y
--
--#
--# Native Language Support
--#
- CONFIG_NLS=m
- CONFIG_NLS_DEFAULT="iso8859-1"
- CONFIG_NLS_CODEPAGE_437=m
-@@ -739,17 +1027,18 @@ CONFIG_NLS_ISO8859_1=m
- # CONFIG_NLS_KOI8_R is not set
- # CONFIG_NLS_KOI8_U is not set
- CONFIG_NLS_UTF8=m
--
--#
--# Distributed Lock Manager
--#
- # CONFIG_DLM is not set
-+CONFIG_INSTRUMENTATION=y
-+CONFIG_PROFILING=y
-+CONFIG_OPROFILE=m
-+CONFIG_KPROBES=y
-+# CONFIG_MARKERS is not set
-
- #
- # Kernel hacking
- #
--CONFIG_TRACE_IRQFLAGS_SUPPORT=y
- # CONFIG_PRINTK_TIME is not set
-+CONFIG_ENABLE_WARN_DEPRECATED=y
- CONFIG_ENABLE_MUST_CHECK=y
- CONFIG_MAGIC_SYSRQ=y
- # CONFIG_UNUSED_SYMBOLS is not set
-@@ -758,12 +1047,17 @@ CONFIG_DEBUG_FS=y
- CONFIG_DEBUG_KERNEL=y
- # CONFIG_DEBUG_SHIRQ is not set
- CONFIG_DETECT_SOFTLOCKUP=y
-+CONFIG_SCHED_DEBUG=y
- # CONFIG_SCHEDSTATS is not set
- # CONFIG_TIMER_STATS is not set
-+# CONFIG_SLUB_DEBUG_ON is not set
- # CONFIG_DEBUG_RT_MUTEXES is not set
- # CONFIG_RT_MUTEX_TESTER is not set
- # CONFIG_DEBUG_SPINLOCK is not set
- # CONFIG_DEBUG_MUTEXES is not set
-+# CONFIG_DEBUG_LOCK_ALLOC is not set
-+# CONFIG_PROVE_LOCKING is not set
-+# CONFIG_LOCK_STAT is not set
- # CONFIG_DEBUG_SPINLOCK_SLEEP is not set
- # CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
- # CONFIG_DEBUG_KOBJECT is not set
-@@ -771,22 +1065,63 @@ CONFIG_DEBUG_BUGVERBOSE=y
- # CONFIG_DEBUG_INFO is not set
- # CONFIG_DEBUG_VM is not set
- # CONFIG_DEBUG_LIST is not set
-+# CONFIG_DEBUG_SG is not set
- CONFIG_FRAME_POINTER=y
- CONFIG_FORCED_INLINING=y
-+# CONFIG_BOOT_PRINTK_DELAY is not set
- # CONFIG_RCU_TORTURE_TEST is not set
-+# CONFIG_LKDTM is not set
- # CONFIG_FAULT_INJECTION is not set
--# CONFIG_KPROBES is not set
-+# CONFIG_SAMPLES is not set
-
- #
- # Security options
- #
- # CONFIG_KEYS is not set
- # CONFIG_SECURITY is not set
--
--#
--# Cryptographic options
--#
--# CONFIG_CRYPTO is not set
-+# CONFIG_SECURITY_FILE_CAPABILITIES is not set
-+CONFIG_CRYPTO=y
-+CONFIG_CRYPTO_ALGAPI=m
-+CONFIG_CRYPTO_BLKCIPHER=m
-+CONFIG_CRYPTO_HASH=m
-+CONFIG_CRYPTO_MANAGER=m
-+CONFIG_CRYPTO_HMAC=m
-+# CONFIG_CRYPTO_XCBC is not set
-+# CONFIG_CRYPTO_NULL is not set
-+# CONFIG_CRYPTO_MD4 is not set
-+CONFIG_CRYPTO_MD5=m
-+CONFIG_CRYPTO_SHA1=m
-+# CONFIG_CRYPTO_SHA256 is not set
-+# CONFIG_CRYPTO_SHA512 is not set
-+# CONFIG_CRYPTO_WP512 is not set
-+# CONFIG_CRYPTO_TGR192 is not set
-+# CONFIG_CRYPTO_GF128MUL is not set
-+# CONFIG_CRYPTO_ECB is not set
-+CONFIG_CRYPTO_CBC=m
-+# CONFIG_CRYPTO_PCBC is not set
-+# CONFIG_CRYPTO_LRW is not set
-+# CONFIG_CRYPTO_XTS is not set
-+# CONFIG_CRYPTO_CRYPTD is not set
-+CONFIG_CRYPTO_DES=m
-+# CONFIG_CRYPTO_FCRYPT is not set
-+# CONFIG_CRYPTO_BLOWFISH is not set
-+# CONFIG_CRYPTO_TWOFISH is not set
-+# CONFIG_CRYPTO_SERPENT is not set
-+# CONFIG_CRYPTO_AES is not set
-+# CONFIG_CRYPTO_CAST5 is not set
-+# CONFIG_CRYPTO_CAST6 is not set
-+# CONFIG_CRYPTO_TEA is not set
-+# CONFIG_CRYPTO_ARC4 is not set
-+# CONFIG_CRYPTO_KHAZAD is not set
-+# CONFIG_CRYPTO_ANUBIS is not set
-+# CONFIG_CRYPTO_SEED is not set
-+CONFIG_CRYPTO_DEFLATE=m
-+# CONFIG_CRYPTO_MICHAEL_MIC is not set
-+# CONFIG_CRYPTO_CRC32C is not set
-+# CONFIG_CRYPTO_CAMELLIA is not set
-+# CONFIG_CRYPTO_TEST is not set
-+# CONFIG_CRYPTO_AUTHENC is not set
-+# CONFIG_CRYPTO_HW is not set
-
- #
- # Library routines
-@@ -794,10 +1129,10 @@ CONFIG_FORCED_INLINING=y
- CONFIG_BITREVERSE=y
- CONFIG_CRC_CCITT=m
- # CONFIG_CRC16 is not set
--# CONFIG_CRC_ITU_T is not set
-+CONFIG_CRC_ITU_T=m
- CONFIG_CRC32=y
-+CONFIG_CRC7=m
- # CONFIG_LIBCRC32C is not set
--CONFIG_AUDIT_GENERIC=y
- CONFIG_ZLIB_INFLATE=y
- CONFIG_ZLIB_DEFLATE=y
- CONFIG_PLIST=y
-diff -Nrup linux-2.6.24/arch/avr32/configs/atstk1003_defconfig linux-avr32/arch/avr32/configs/atstk1003_defconfig
---- linux-2.6.24/arch/avr32/configs/atstk1003_defconfig 1969-12-31 19:00:00.000000000 -0500
-+++ linux-avr32/arch/avr32/configs/atstk1003_defconfig 2008-02-01 14:51:35.000000000 -0500
-@@ -0,0 +1,1015 @@
-+#
-+# Automatically generated make config: don't edit
-+# Linux kernel version: 2.6.24-rc7
-+# Wed Jan 9 22:54:34 2008
-+#
-+CONFIG_AVR32=y
-+CONFIG_GENERIC_GPIO=y
-+CONFIG_GENERIC_HARDIRQS=y
-+CONFIG_STACKTRACE_SUPPORT=y
-+CONFIG_LOCKDEP_SUPPORT=y
-+CONFIG_TRACE_IRQFLAGS_SUPPORT=y
-+CONFIG_HARDIRQS_SW_RESEND=y
-+CONFIG_GENERIC_IRQ_PROBE=y
-+CONFIG_RWSEM_GENERIC_SPINLOCK=y
-+CONFIG_GENERIC_TIME=y
-+# CONFIG_RWSEM_XCHGADD_ALGORITHM is not set
-+# CONFIG_ARCH_HAS_ILOG2_U32 is not set
-+# CONFIG_ARCH_HAS_ILOG2_U64 is not set
-+CONFIG_ARCH_SUPPORTS_OPROFILE=y
-+CONFIG_GENERIC_HWEIGHT=y
-+CONFIG_GENERIC_CALIBRATE_DELAY=y
-+CONFIG_GENERIC_BUG=y
-+CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
-+
-+#
-+# General setup
-+#
-+CONFIG_EXPERIMENTAL=y
-+CONFIG_BROKEN_ON_SMP=y
-+CONFIG_INIT_ENV_ARG_LIMIT=32
-+CONFIG_LOCALVERSION=""
-+# CONFIG_LOCALVERSION_AUTO is not set
-+CONFIG_SWAP=y
-+CONFIG_SYSVIPC=y
-+CONFIG_SYSVIPC_SYSCTL=y
-+CONFIG_POSIX_MQUEUE=y
-+CONFIG_BSD_PROCESS_ACCT=y
-+CONFIG_BSD_PROCESS_ACCT_V3=y
-+CONFIG_TASKSTATS=y
-+CONFIG_TASK_DELAY_ACCT=y
-+# CONFIG_TASK_XACCT is not set
-+# CONFIG_USER_NS is not set
-+# CONFIG_PID_NS is not set
-+CONFIG_AUDIT=y
-+# CONFIG_IKCONFIG is not set
-+CONFIG_LOG_BUF_SHIFT=14
-+# CONFIG_CGROUPS is not set
-+CONFIG_FAIR_GROUP_SCHED=y
-+CONFIG_FAIR_USER_SCHED=y
-+# CONFIG_FAIR_CGROUP_SCHED is not set
-+CONFIG_SYSFS_DEPRECATED=y
-+CONFIG_RELAY=y
-+CONFIG_BLK_DEV_INITRD=y
-+CONFIG_INITRAMFS_SOURCE=""
-+CONFIG_CC_OPTIMIZE_FOR_SIZE=y
-+CONFIG_SYSCTL=y
-+CONFIG_EMBEDDED=y
-+# CONFIG_SYSCTL_SYSCALL is not set
-+CONFIG_KALLSYMS=y
-+# CONFIG_KALLSYMS_ALL is not set
-+# CONFIG_KALLSYMS_EXTRA_PASS is not set
-+CONFIG_HOTPLUG=y
-+CONFIG_PRINTK=y
-+CONFIG_BUG=y
-+CONFIG_ELF_CORE=y
-+# CONFIG_BASE_FULL is not set
-+CONFIG_FUTEX=y
-+CONFIG_ANON_INODES=y
-+CONFIG_EPOLL=y
-+CONFIG_SIGNALFD=y
-+CONFIG_EVENTFD=y
-+CONFIG_SHMEM=y
-+CONFIG_VM_EVENT_COUNTERS=y
-+# CONFIG_SLUB_DEBUG is not set
-+# CONFIG_SLAB is not set
-+CONFIG_SLUB=y
-+# CONFIG_SLOB is not set
-+CONFIG_SLABINFO=y
-+CONFIG_RT_MUTEXES=y
-+# CONFIG_TINY_SHMEM is not set
-+CONFIG_BASE_SMALL=1
-+CONFIG_MODULES=y
-+CONFIG_MODULE_UNLOAD=y
-+# CONFIG_MODULE_FORCE_UNLOAD is not set
-+# CONFIG_MODVERSIONS is not set
-+# CONFIG_MODULE_SRCVERSION_ALL is not set
-+# CONFIG_KMOD is not set
-+CONFIG_BLOCK=y
-+# CONFIG_LBD is not set
-+# CONFIG_BLK_DEV_IO_TRACE is not set
-+# CONFIG_LSF is not set
-+# CONFIG_BLK_DEV_BSG is not set
-+
-+#
-+# IO Schedulers
-+#
-+CONFIG_IOSCHED_NOOP=y
-+# CONFIG_IOSCHED_AS is not set
-+# CONFIG_IOSCHED_DEADLINE is not set
-+CONFIG_IOSCHED_CFQ=y
-+# CONFIG_DEFAULT_AS is not set
-+# CONFIG_DEFAULT_DEADLINE is not set
-+CONFIG_DEFAULT_CFQ=y
-+# CONFIG_DEFAULT_NOOP is not set
-+CONFIG_DEFAULT_IOSCHED="cfq"
-+
-+#
-+# System Type and features
-+#
-+CONFIG_SUBARCH_AVR32B=y
-+CONFIG_MMU=y
-+CONFIG_PERFORMANCE_COUNTERS=y
-+CONFIG_PLATFORM_AT32AP=y
-+CONFIG_CPU_AT32AP700X=y
-+CONFIG_CPU_AT32AP7001=y
-+CONFIG_BOARD_ATSTK1000=y
-+# CONFIG_BOARD_ATNGW100 is not set
-+# CONFIG_BOARD_ATSTK1002 is not set
-+CONFIG_BOARD_ATSTK1003=y
-+# CONFIG_BOARD_ATSTK1004 is not set
-+# CONFIG_BOARD_ATSTK100X_CUSTOM is not set
-+# CONFIG_BOARD_ATSTK100X_SPI1 is not set
-+# CONFIG_BOARD_ATSTK1000_J2_LED is not set
-+# CONFIG_BOARD_ATSTK1000_J2_LED8 is not set
-+# CONFIG_BOARD_ATSTK1000_J2_RGB is not set
-+CONFIG_BOARD_ATSTK1000_EXTDAC=y
-+CONFIG_LOADER_U_BOOT=y
-+
-+#
-+# Atmel AVR32 AP options
-+#
-+# CONFIG_AP700X_32_BIT_SMC is not set
-+CONFIG_AP700X_16_BIT_SMC=y
-+# CONFIG_AP700X_8_BIT_SMC is not set
-+CONFIG_LOAD_ADDRESS=0x10000000
-+CONFIG_ENTRY_ADDRESS=0x90000000
-+CONFIG_PHYS_OFFSET=0x10000000
-+CONFIG_PREEMPT_NONE=y
-+# CONFIG_PREEMPT_VOLUNTARY is not set
-+# CONFIG_PREEMPT is not set
-+# CONFIG_HAVE_ARCH_BOOTMEM_NODE is not set
-+# CONFIG_ARCH_HAVE_MEMORY_PRESENT is not set
-+# CONFIG_NEED_NODE_MEMMAP_SIZE is not set
-+CONFIG_ARCH_FLATMEM_ENABLE=y
-+# CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set
-+# CONFIG_ARCH_SPARSEMEM_ENABLE is not set
-+CONFIG_SELECT_MEMORY_MODEL=y
-+CONFIG_FLATMEM_MANUAL=y
-+# CONFIG_DISCONTIGMEM_MANUAL is not set
-+# CONFIG_SPARSEMEM_MANUAL is not set
-+CONFIG_FLATMEM=y
-+CONFIG_FLAT_NODE_MEM_MAP=y
-+# CONFIG_SPARSEMEM_STATIC is not set
-+# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
-+CONFIG_SPLIT_PTLOCK_CPUS=4
-+# CONFIG_RESOURCES_64BIT is not set
-+CONFIG_ZONE_DMA_FLAG=0
-+CONFIG_VIRT_TO_BUS=y
-+# CONFIG_OWNERSHIP_TRACE is not set
-+# CONFIG_HZ_100 is not set
-+CONFIG_HZ_250=y
-+# CONFIG_HZ_300 is not set
-+# CONFIG_HZ_1000 is not set
-+CONFIG_HZ=250
-+CONFIG_CMDLINE=""
-+
-+#
-+# Power management options
-+#
-+
-+#
-+# CPU Frequency scaling
-+#
-+CONFIG_CPU_FREQ=y
-+CONFIG_CPU_FREQ_TABLE=y
-+# CONFIG_CPU_FREQ_DEBUG is not set
-+# CONFIG_CPU_FREQ_STAT is not set
-+CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE=y
-+# CONFIG_CPU_FREQ_DEFAULT_GOV_USERSPACE is not set
-+# CONFIG_CPU_FREQ_DEFAULT_GOV_ONDEMAND is not set
-+# CONFIG_CPU_FREQ_DEFAULT_GOV_CONSERVATIVE is not set
-+CONFIG_CPU_FREQ_GOV_PERFORMANCE=y
-+# CONFIG_CPU_FREQ_GOV_POWERSAVE is not set
-+CONFIG_CPU_FREQ_GOV_USERSPACE=y
-+CONFIG_CPU_FREQ_GOV_ONDEMAND=y
-+# CONFIG_CPU_FREQ_GOV_CONSERVATIVE is not set
-+CONFIG_CPU_FREQ_AT32AP=y
-+
-+#
-+# Bus options
-+#
-+# CONFIG_ARCH_SUPPORTS_MSI is not set
-+# CONFIG_PCCARD is not set
-+
-+#
-+# Executable file formats
-+#
-+CONFIG_BINFMT_ELF=y
-+# CONFIG_BINFMT_MISC is not set
-+
-+#
-+# Networking
-+#
-+CONFIG_NET=y
-+
-+#
-+# Networking options
-+#
-+CONFIG_PACKET=y
-+CONFIG_PACKET_MMAP=y
-+CONFIG_UNIX=y
-+# CONFIG_NET_KEY is not set
-+CONFIG_INET=y
-+# CONFIG_IP_MULTICAST is not set
-+# CONFIG_IP_ADVANCED_ROUTER is not set
-+CONFIG_IP_FIB_HASH=y
-+# CONFIG_IP_PNP is not set
-+# CONFIG_NET_IPIP is not set
-+# CONFIG_NET_IPGRE is not set
-+# CONFIG_ARPD is not set
-+# CONFIG_SYN_COOKIES is not set
-+# CONFIG_INET_AH is not set
-+# CONFIG_INET_ESP is not set
-+# CONFIG_INET_IPCOMP is not set
-+# CONFIG_INET_XFRM_TUNNEL is not set
-+# CONFIG_INET_TUNNEL is not set
-+# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
-+# CONFIG_INET_XFRM_MODE_TUNNEL is not set
-+# CONFIG_INET_XFRM_MODE_BEET is not set
-+# CONFIG_INET_LRO is not set
-+# CONFIG_INET_DIAG is not set
-+# CONFIG_TCP_CONG_ADVANCED is not set
-+CONFIG_TCP_CONG_CUBIC=y
-+CONFIG_DEFAULT_TCP_CONG="cubic"
-+# CONFIG_TCP_MD5SIG is not set
-+# CONFIG_IPV6 is not set
-+# CONFIG_INET6_XFRM_TUNNEL is not set
-+# CONFIG_INET6_TUNNEL is not set
-+# CONFIG_NETWORK_SECMARK is not set
-+# CONFIG_NETFILTER is not set
-+# CONFIG_IP_DCCP is not set
-+# CONFIG_IP_SCTP is not set
-+# CONFIG_TIPC is not set
-+# CONFIG_ATM is not set
-+# CONFIG_BRIDGE is not set
-+# CONFIG_VLAN_8021Q is not set
-+# CONFIG_DECNET is not set
-+# CONFIG_LLC2 is not set
-+# CONFIG_IPX is not set
-+# CONFIG_ATALK is not set
-+# CONFIG_X25 is not set
-+# CONFIG_LAPB is not set
-+# CONFIG_ECONET is not set
-+# CONFIG_WAN_ROUTER is not set
-+# CONFIG_NET_SCHED is not set
-+
-+#
-+# Network testing
-+#
-+# CONFIG_NET_PKTGEN is not set
-+# CONFIG_NET_TCPPROBE is not set
-+# CONFIG_HAMRADIO is not set
-+# CONFIG_IRDA is not set
-+# CONFIG_BT is not set
-+# CONFIG_AF_RXRPC is not set
-+
-+#
-+# Wireless
-+#
-+# CONFIG_CFG80211 is not set
-+# CONFIG_WIRELESS_EXT is not set
-+# CONFIG_MAC80211 is not set
-+# CONFIG_IEEE80211 is not set
-+# CONFIG_RFKILL is not set
-+# CONFIG_NET_9P is not set
-+
-+#
-+# Device Drivers
-+#
-+
-+#
-+# Generic Driver Options
-+#
-+CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
-+CONFIG_STANDALONE=y
-+# CONFIG_PREVENT_FIRMWARE_BUILD is not set
-+# CONFIG_FW_LOADER is not set
-+# CONFIG_DEBUG_DRIVER is not set
-+# CONFIG_DEBUG_DEVRES is not set
-+# CONFIG_SYS_HYPERVISOR is not set
-+# CONFIG_CONNECTOR is not set
-+CONFIG_MTD=y
-+# CONFIG_MTD_DEBUG is not set
-+# CONFIG_MTD_CONCAT is not set
-+CONFIG_MTD_PARTITIONS=y
-+# CONFIG_MTD_REDBOOT_PARTS is not set
-+CONFIG_MTD_CMDLINE_PARTS=y
-+
-+#
-+# User Modules And Translation Layers
-+#
-+CONFIG_MTD_CHAR=y
-+CONFIG_MTD_BLKDEVS=y
-+CONFIG_MTD_BLOCK=y
-+# CONFIG_FTL is not set
-+# CONFIG_NFTL is not set
-+# CONFIG_INFTL is not set
-+# CONFIG_RFD_FTL is not set
-+# CONFIG_SSFDC is not set
-+# CONFIG_MTD_OOPS is not set
-+
-+#
-+# RAM/ROM/Flash chip drivers
-+#
-+CONFIG_MTD_CFI=y
-+# CONFIG_MTD_JEDECPROBE is not set
-+CONFIG_MTD_GEN_PROBE=y
-+# CONFIG_MTD_CFI_ADV_OPTIONS is not set
-+CONFIG_MTD_MAP_BANK_WIDTH_1=y
-+CONFIG_MTD_MAP_BANK_WIDTH_2=y
-+CONFIG_MTD_MAP_BANK_WIDTH_4=y
-+# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
-+# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
-+# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
-+CONFIG_MTD_CFI_I1=y
-+CONFIG_MTD_CFI_I2=y
-+# CONFIG_MTD_CFI_I4 is not set
-+# CONFIG_MTD_CFI_I8 is not set
-+# CONFIG_MTD_CFI_INTELEXT is not set
-+CONFIG_MTD_CFI_AMDSTD=y
-+# CONFIG_MTD_CFI_STAA is not set
-+CONFIG_MTD_CFI_UTIL=y
-+# CONFIG_MTD_RAM is not set
-+# CONFIG_MTD_ROM is not set
-+# CONFIG_MTD_ABSENT is not set
-+
-+#
-+# Mapping drivers for chip access
-+#
-+# CONFIG_MTD_COMPLEX_MAPPINGS is not set
-+CONFIG_MTD_PHYSMAP=y
-+CONFIG_MTD_PHYSMAP_START=0x8000000
-+CONFIG_MTD_PHYSMAP_LEN=0x0
-+CONFIG_MTD_PHYSMAP_BANKWIDTH=2
-+# CONFIG_MTD_PLATRAM is not set
-+
-+#
-+# Self-contained MTD device drivers
-+#
-+CONFIG_MTD_DATAFLASH=m
-+CONFIG_MTD_M25P80=m
-+# CONFIG_MTD_SLRAM is not set
-+# CONFIG_MTD_PHRAM is not set
-+# CONFIG_MTD_MTDRAM is not set
-+# CONFIG_MTD_BLOCK2MTD is not set
-+
-+#
-+# Disk-On-Chip Device Drivers
-+#
-+# CONFIG_MTD_DOC2000 is not set
-+# CONFIG_MTD_DOC2001 is not set
-+# CONFIG_MTD_DOC2001PLUS is not set
-+# CONFIG_MTD_NAND is not set
-+# CONFIG_MTD_ONENAND is not set
-+
-+#
-+# UBI - Unsorted block images
-+#
-+# CONFIG_MTD_UBI is not set
-+# CONFIG_PARPORT is not set
-+CONFIG_BLK_DEV=y
-+# CONFIG_BLK_DEV_COW_COMMON is not set
-+CONFIG_BLK_DEV_LOOP=m
-+# CONFIG_BLK_DEV_CRYPTOLOOP is not set
-+CONFIG_BLK_DEV_NBD=m
-+CONFIG_BLK_DEV_RAM=m
-+CONFIG_BLK_DEV_RAM_COUNT=16
-+CONFIG_BLK_DEV_RAM_SIZE=4096
-+CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024
-+# CONFIG_CDROM_PKTCDVD is not set
-+# CONFIG_ATA_OVER_ETH is not set
-+CONFIG_MISC_DEVICES=y
-+# CONFIG_EEPROM_93CX6 is not set
-+CONFIG_ATMEL_SSC=m
-+# CONFIG_IDE is not set
-+
-+#
-+# SCSI device support
-+#
-+# CONFIG_RAID_ATTRS is not set
-+CONFIG_SCSI=m
-+CONFIG_SCSI_DMA=y
-+# CONFIG_SCSI_TGT is not set
-+# CONFIG_SCSI_NETLINK is not set
-+# CONFIG_SCSI_PROC_FS is not set
-+
-+#
-+# SCSI support type (disk, tape, CD-ROM)
-+#
-+CONFIG_BLK_DEV_SD=m
-+# CONFIG_CHR_DEV_ST is not set
-+# CONFIG_CHR_DEV_OSST is not set
-+CONFIG_BLK_DEV_SR=m
-+# CONFIG_BLK_DEV_SR_VENDOR is not set
-+# CONFIG_CHR_DEV_SG is not set
-+# CONFIG_CHR_DEV_SCH is not set
-+
-+#
-+# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
-+#
-+# CONFIG_SCSI_MULTI_LUN is not set
-+# CONFIG_SCSI_CONSTANTS is not set
-+# CONFIG_SCSI_LOGGING is not set
-+# CONFIG_SCSI_SCAN_ASYNC is not set
-+CONFIG_SCSI_WAIT_SCAN=m
-+
-+#
-+# SCSI Transports
-+#
-+# CONFIG_SCSI_SPI_ATTRS is not set
-+# CONFIG_SCSI_FC_ATTRS is not set
-+# CONFIG_SCSI_ISCSI_ATTRS is not set
-+# CONFIG_SCSI_SAS_LIBSAS is not set
-+# CONFIG_SCSI_SRP_ATTRS is not set
-+CONFIG_SCSI_LOWLEVEL=y
-+# CONFIG_ISCSI_TCP is not set
-+# CONFIG_SCSI_DEBUG is not set
-+CONFIG_ATA=m
-+# CONFIG_ATA_NONSTANDARD is not set
-+CONFIG_PATA_AT32=m
-+# CONFIG_PATA_PLATFORM is not set
-+# CONFIG_MD is not set
-+CONFIG_NETDEVICES=y
-+# CONFIG_NETDEVICES_MULTIQUEUE is not set
-+# CONFIG_DUMMY is not set
-+# CONFIG_BONDING is not set
-+# CONFIG_MACVLAN is not set
-+# CONFIG_EQUALIZER is not set
-+# CONFIG_TUN is not set
-+# CONFIG_VETH is not set
-+# CONFIG_NET_ETHERNET is not set
-+# CONFIG_NETDEV_1000 is not set
-+# CONFIG_NETDEV_10000 is not set
-+
-+#
-+# Wireless LAN
-+#
-+# CONFIG_WLAN_PRE80211 is not set
-+# CONFIG_WLAN_80211 is not set
-+# CONFIG_WAN is not set
-+CONFIG_PPP=m
-+# CONFIG_PPP_MULTILINK is not set
-+# CONFIG_PPP_FILTER is not set
-+CONFIG_PPP_ASYNC=m
-+# CONFIG_PPP_SYNC_TTY is not set
-+CONFIG_PPP_DEFLATE=m
-+CONFIG_PPP_BSDCOMP=m
-+# CONFIG_PPP_MPPE is not set
-+# CONFIG_PPPOE is not set
-+# CONFIG_PPPOL2TP is not set
-+# CONFIG_SLIP is not set
-+CONFIG_SLHC=m
-+# CONFIG_SHAPER is not set
-+# CONFIG_NETCONSOLE is not set
-+# CONFIG_NETPOLL is not set
-+# CONFIG_NET_POLL_CONTROLLER is not set
-+# CONFIG_ISDN is not set
-+# CONFIG_PHONE is not set
-+
-+#
-+# Input device support
-+#
-+CONFIG_INPUT=m
-+# CONFIG_INPUT_FF_MEMLESS is not set
-+CONFIG_INPUT_POLLDEV=m
-+
-+#
-+# Userland interfaces
-+#
-+CONFIG_INPUT_MOUSEDEV=m
-+CONFIG_INPUT_MOUSEDEV_PSAUX=y
-+CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
-+CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
-+# CONFIG_INPUT_JOYDEV is not set
-+# CONFIG_INPUT_EVDEV is not set
-+# CONFIG_INPUT_EVBUG is not set
-+
-+#
-+# Input Device Drivers
-+#
-+CONFIG_INPUT_KEYBOARD=y
-+# CONFIG_KEYBOARD_ATKBD is not set
-+# CONFIG_KEYBOARD_SUNKBD is not set
-+# CONFIG_KEYBOARD_LKKBD is not set
-+# CONFIG_KEYBOARD_XTKBD is not set
-+# CONFIG_KEYBOARD_NEWTON is not set
-+# CONFIG_KEYBOARD_STOWAWAY is not set
-+CONFIG_KEYBOARD_GPIO=m
-+CONFIG_INPUT_MOUSE=y
-+# CONFIG_MOUSE_PS2 is not set
-+# CONFIG_MOUSE_SERIAL is not set
-+# CONFIG_MOUSE_VSXXXAA is not set
-+CONFIG_MOUSE_GPIO=m
-+# CONFIG_INPUT_JOYSTICK is not set
-+# CONFIG_INPUT_TABLET is not set
-+# CONFIG_INPUT_TOUCHSCREEN is not set
-+# CONFIG_INPUT_MISC is not set
-+
-+#
-+# Hardware I/O ports
-+#
-+# CONFIG_SERIO is not set
-+# CONFIG_GAMEPORT is not set
-+
-+#
-+# Character devices
-+#
-+# CONFIG_VT is not set
-+# CONFIG_SERIAL_NONSTANDARD is not set
-+
-+#
-+# Serial drivers
-+#
-+# CONFIG_SERIAL_8250 is not set
-+
-+#
-+# Non-8250 serial port support
-+#
-+CONFIG_SERIAL_ATMEL=y
-+CONFIG_SERIAL_ATMEL_CONSOLE=y
-+# CONFIG_SERIAL_ATMEL_TTYAT is not set
-+CONFIG_SERIAL_CORE=y
-+CONFIG_SERIAL_CORE_CONSOLE=y
-+CONFIG_UNIX98_PTYS=y
-+# CONFIG_LEGACY_PTYS is not set
-+# CONFIG_IPMI_HANDLER is not set
-+# CONFIG_HW_RANDOM is not set
-+# CONFIG_RTC is not set
-+# CONFIG_GEN_RTC is not set
-+# CONFIG_R3964 is not set
-+# CONFIG_RAW_DRIVER is not set
-+# CONFIG_TCG_TPM is not set
-+CONFIG_I2C=m
-+CONFIG_I2C_BOARDINFO=y
-+CONFIG_I2C_CHARDEV=m
-+
-+#
-+# I2C Algorithms
-+#
-+CONFIG_I2C_ALGOBIT=m
-+# CONFIG_I2C_ALGOPCF is not set
-+# CONFIG_I2C_ALGOPCA is not set
-+
-+#
-+# I2C Hardware Bus support
-+#
-+CONFIG_I2C_GPIO=m
-+# CONFIG_I2C_OCORES is not set
-+# CONFIG_I2C_PARPORT_LIGHT is not set
-+# CONFIG_I2C_SIMTEC is not set
-+# CONFIG_I2C_TAOS_EVM is not set
-+# CONFIG_I2C_STUB is not set
-+
-+#
-+# Miscellaneous I2C Chip support
-+#
-+# CONFIG_SENSORS_DS1337 is not set
-+# CONFIG_SENSORS_DS1374 is not set
-+# CONFIG_DS1682 is not set
-+# CONFIG_SENSORS_EEPROM is not set
-+# CONFIG_SENSORS_PCF8574 is not set
-+# CONFIG_SENSORS_PCA9539 is not set
-+# CONFIG_SENSORS_PCF8591 is not set
-+# CONFIG_SENSORS_MAX6875 is not set
-+# CONFIG_SENSORS_TSL2550 is not set
-+# CONFIG_I2C_DEBUG_CORE is not set
-+# CONFIG_I2C_DEBUG_ALGO is not set
-+# CONFIG_I2C_DEBUG_BUS is not set
-+# CONFIG_I2C_DEBUG_CHIP is not set
-+
-+#
-+# SPI support
-+#
-+CONFIG_SPI=y
-+# CONFIG_SPI_DEBUG is not set
-+CONFIG_SPI_MASTER=y
-+
-+#
-+# SPI Master Controller Drivers
-+#
-+CONFIG_SPI_ATMEL=y
-+# CONFIG_SPI_BITBANG is not set
-+
-+#
-+# SPI Protocol Masters
-+#
-+# CONFIG_SPI_AT25 is not set
-+CONFIG_SPI_SPIDEV=m
-+# CONFIG_SPI_TLE62X0 is not set
-+# CONFIG_W1 is not set
-+# CONFIG_POWER_SUPPLY is not set
-+# CONFIG_HWMON is not set
-+CONFIG_WATCHDOG=y
-+# CONFIG_WATCHDOG_NOWAYOUT is not set
-+
-+#
-+# Watchdog Device Drivers
-+#
-+# CONFIG_SOFT_WATCHDOG is not set
-+CONFIG_AT32AP700X_WDT=y
-+
-+#
-+# Sonics Silicon Backplane
-+#
-+CONFIG_SSB_POSSIBLE=y
-+# CONFIG_SSB is not set
-+
-+#
-+# Multifunction device drivers
-+#
-+# CONFIG_MFD_SM501 is not set
-+
-+#
-+# Multimedia devices
-+#
-+# CONFIG_VIDEO_DEV is not set
-+# CONFIG_DVB_CORE is not set
-+# CONFIG_DAB is not set
-+
-+#
-+# Graphics support
-+#
-+# CONFIG_VGASTATE is not set
-+# CONFIG_VIDEO_OUTPUT_CONTROL is not set
-+# CONFIG_FB is not set
-+# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
-+
-+#
-+# Display device support
-+#
-+# CONFIG_DISPLAY_SUPPORT is not set
-+
-+#
-+# Sound
-+#
-+CONFIG_SOUND=m
-+
-+#
-+# Advanced Linux Sound Architecture
-+#
-+CONFIG_SND=m
-+CONFIG_SND_TIMER=m
-+CONFIG_SND_PCM=m
-+# CONFIG_SND_SEQUENCER is not set
-+CONFIG_SND_OSSEMUL=y
-+CONFIG_SND_MIXER_OSS=m
-+CONFIG_SND_PCM_OSS=m
-+CONFIG_SND_PCM_OSS_PLUGINS=y
-+# CONFIG_SND_DYNAMIC_MINORS is not set
-+CONFIG_SND_SUPPORT_OLD_API=y
-+CONFIG_SND_VERBOSE_PROCFS=y
-+# CONFIG_SND_VERBOSE_PRINTK is not set
-+# CONFIG_SND_DEBUG is not set
-+
-+#
-+# Generic devices
-+#
-+# CONFIG_SND_DUMMY is not set
-+# CONFIG_SND_MTPAV is not set
-+# CONFIG_SND_SERIAL_U16550 is not set
-+# CONFIG_SND_MPU401 is not set
-+
-+#
-+# SPI devices
-+#
-+CONFIG_SND_AT73C213=m
-+CONFIG_SND_AT73C213_TARGET_BITRATE=48000
-+
-+#
-+# System on Chip audio support
-+#
-+# CONFIG_SND_SOC is not set
-+
-+#
-+# SoC Audio support for SuperH
-+#
-+
-+#
-+# Open Sound System
-+#
-+# CONFIG_SOUND_PRIME is not set
-+# CONFIG_HID_SUPPORT is not set
-+CONFIG_USB_SUPPORT=y
-+# CONFIG_USB_ARCH_HAS_HCD is not set
-+# CONFIG_USB_ARCH_HAS_OHCI is not set
-+# CONFIG_USB_ARCH_HAS_EHCI is not set
-+
-+#
-+# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
-+#
-+
-+#
-+# USB Gadget Support
-+#
-+CONFIG_USB_GADGET=y
-+# CONFIG_USB_GADGET_DEBUG is not set
-+# CONFIG_USB_GADGET_DEBUG_FILES is not set
-+CONFIG_USB_GADGET_DEBUG_FS=y
-+CONFIG_USB_GADGET_SELECTED=y
-+# CONFIG_USB_GADGET_AMD5536UDC is not set
-+CONFIG_USB_GADGET_ATMEL_USBA=y
-+CONFIG_USB_ATMEL_USBA=y
-+# CONFIG_USB_GADGET_FSL_USB2 is not set
-+# CONFIG_USB_GADGET_NET2280 is not set
-+# CONFIG_USB_GADGET_PXA2XX is not set
-+# CONFIG_USB_GADGET_M66592 is not set
-+# CONFIG_USB_GADGET_GOKU is not set
-+# CONFIG_USB_GADGET_LH7A40X is not set
-+# CONFIG_USB_GADGET_OMAP is not set
-+# CONFIG_USB_GADGET_S3C2410 is not set
-+# CONFIG_USB_GADGET_AT91 is not set
-+# CONFIG_USB_GADGET_DUMMY_HCD is not set
-+CONFIG_USB_GADGET_DUALSPEED=y
-+CONFIG_USB_ZERO=m
-+CONFIG_USB_ETH=m
-+CONFIG_USB_ETH_RNDIS=y
-+CONFIG_USB_GADGETFS=m
-+CONFIG_USB_FILE_STORAGE=m
-+# CONFIG_USB_FILE_STORAGE_TEST is not set
-+CONFIG_USB_G_SERIAL=m
-+# CONFIG_USB_MIDI_GADGET is not set
-+CONFIG_MMC=m
-+# CONFIG_MMC_DEBUG is not set
-+# CONFIG_MMC_UNSAFE_RESUME is not set
-+
-+#
-+# MMC/SD Card Drivers
-+#
-+CONFIG_MMC_BLOCK=m
-+# CONFIG_MMC_BLOCK_BOUNCE is not set
-+# CONFIG_SDIO_UART is not set
-+
-+#
-+# MMC/SD Host Controller Drivers
-+#
-+CONFIG_MMC_SPI=m
-+CONFIG_NEW_LEDS=y
-+CONFIG_LEDS_CLASS=y
-+
-+#
-+# LED drivers
-+#
-+CONFIG_LEDS_GPIO=y
-+
-+#
-+# LED Triggers
-+#
-+CONFIG_LEDS_TRIGGERS=y
-+CONFIG_LEDS_TRIGGER_TIMER=y
-+CONFIG_LEDS_TRIGGER_HEARTBEAT=y
-+CONFIG_RTC_LIB=y
-+CONFIG_RTC_CLASS=y
-+CONFIG_RTC_HCTOSYS=y
-+CONFIG_RTC_HCTOSYS_DEVICE="rtc0"
-+# CONFIG_RTC_DEBUG is not set
-+
-+#
-+# RTC interfaces
-+#
-+CONFIG_RTC_INTF_SYSFS=y
-+CONFIG_RTC_INTF_PROC=y
-+CONFIG_RTC_INTF_DEV=y
-+# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
-+# CONFIG_RTC_DRV_TEST is not set
-+
-+#
-+# I2C RTC drivers
-+#
-+# CONFIG_RTC_DRV_DS1307 is not set
-+# CONFIG_RTC_DRV_DS1374 is not set
-+# CONFIG_RTC_DRV_DS1672 is not set
-+# CONFIG_RTC_DRV_MAX6900 is not set
-+# CONFIG_RTC_DRV_RS5C372 is not set
-+# CONFIG_RTC_DRV_ISL1208 is not set
-+# CONFIG_RTC_DRV_X1205 is not set
-+# CONFIG_RTC_DRV_PCF8563 is not set
-+# CONFIG_RTC_DRV_PCF8583 is not set
-+# CONFIG_RTC_DRV_M41T80 is not set
-+
-+#
-+# SPI RTC drivers
-+#
-+# CONFIG_RTC_DRV_RS5C348 is not set
-+# CONFIG_RTC_DRV_MAX6902 is not set
-+
-+#
-+# Platform RTC drivers
-+#
-+# CONFIG_RTC_DRV_DS1553 is not set
-+# CONFIG_RTC_DRV_STK17TA8 is not set
-+# CONFIG_RTC_DRV_DS1742 is not set
-+# CONFIG_RTC_DRV_M48T86 is not set
-+# CONFIG_RTC_DRV_M48T59 is not set
-+# CONFIG_RTC_DRV_V3020 is not set
-+
-+#
-+# on-CPU RTC drivers
-+#
-+CONFIG_RTC_DRV_AT32AP700X=y
-+
-+#
-+# Userspace I/O
-+#
-+CONFIG_UIO=m
-+
-+#
-+# File systems
-+#
-+CONFIG_EXT2_FS=m
-+# CONFIG_EXT2_FS_XATTR is not set
-+# CONFIG_EXT2_FS_XIP is not set
-+CONFIG_EXT3_FS=m
-+# CONFIG_EXT3_FS_XATTR is not set
-+# CONFIG_EXT4DEV_FS is not set
-+CONFIG_JBD=m
-+# CONFIG_JBD_DEBUG is not set
-+# CONFIG_REISERFS_FS is not set
-+# CONFIG_JFS_FS is not set
-+# CONFIG_FS_POSIX_ACL is not set
-+# CONFIG_XFS_FS is not set
-+# CONFIG_GFS2_FS is not set
-+# CONFIG_OCFS2_FS is not set
-+# CONFIG_MINIX_FS is not set
-+# CONFIG_ROMFS_FS is not set
-+CONFIG_INOTIFY=y
-+CONFIG_INOTIFY_USER=y
-+# CONFIG_QUOTA is not set
-+# CONFIG_DNOTIFY is not set
-+# CONFIG_AUTOFS_FS is not set
-+# CONFIG_AUTOFS4_FS is not set
-+CONFIG_FUSE_FS=m
-+
-+#
-+# CD-ROM/DVD Filesystems
-+#
-+# CONFIG_ISO9660_FS is not set
-+# CONFIG_UDF_FS is not set
-+
-+#
-+# DOS/FAT/NT Filesystems
-+#
-+CONFIG_FAT_FS=m
-+CONFIG_MSDOS_FS=m
-+CONFIG_VFAT_FS=m
-+CONFIG_FAT_DEFAULT_CODEPAGE=437
-+CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
-+# CONFIG_NTFS_FS is not set
-+
-+#
-+# Pseudo filesystems
-+#
-+CONFIG_PROC_FS=y
-+CONFIG_PROC_KCORE=y
-+CONFIG_PROC_SYSCTL=y
-+CONFIG_SYSFS=y
-+CONFIG_TMPFS=y
-+# CONFIG_TMPFS_POSIX_ACL is not set
-+# CONFIG_HUGETLB_PAGE is not set
-+CONFIG_CONFIGFS_FS=m
-+
-+#
-+# Miscellaneous filesystems
-+#
-+# CONFIG_ADFS_FS is not set
-+# CONFIG_AFFS_FS is not set
-+# CONFIG_HFS_FS is not set
-+# CONFIG_HFSPLUS_FS is not set
-+# CONFIG_BEFS_FS is not set
-+# CONFIG_BFS_FS is not set
-+# CONFIG_EFS_FS is not set
-+CONFIG_JFFS2_FS=y
-+CONFIG_JFFS2_FS_DEBUG=0
-+CONFIG_JFFS2_FS_WRITEBUFFER=y
-+# CONFIG_JFFS2_FS_WBUF_VERIFY is not set
-+# CONFIG_JFFS2_SUMMARY is not set
-+# CONFIG_JFFS2_FS_XATTR is not set
-+# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set
-+CONFIG_JFFS2_ZLIB=y
-+# CONFIG_JFFS2_LZO is not set
-+CONFIG_JFFS2_RTIME=y
-+# CONFIG_JFFS2_RUBIN is not set
-+# CONFIG_CRAMFS is not set
-+# CONFIG_VXFS_FS is not set
-+# CONFIG_HPFS_FS is not set
-+# CONFIG_QNX4FS_FS is not set
-+# CONFIG_SYSV_FS is not set
-+# CONFIG_UFS_FS is not set
-+# CONFIG_NETWORK_FILESYSTEMS is not set
-+
-+#
-+# Partition Types
-+#
-+# CONFIG_PARTITION_ADVANCED is not set
-+CONFIG_MSDOS_PARTITION=y
-+CONFIG_NLS=m
-+CONFIG_NLS_DEFAULT="iso8859-1"
-+CONFIG_NLS_CODEPAGE_437=m
-+# CONFIG_NLS_CODEPAGE_737 is not set
-+# CONFIG_NLS_CODEPAGE_775 is not set
-+# CONFIG_NLS_CODEPAGE_850 is not set
-+# CONFIG_NLS_CODEPAGE_852 is not set
-+# CONFIG_NLS_CODEPAGE_855 is not set
-+# CONFIG_NLS_CODEPAGE_857 is not set
-+# CONFIG_NLS_CODEPAGE_860 is not set
-+# CONFIG_NLS_CODEPAGE_861 is not set
-+# CONFIG_NLS_CODEPAGE_862 is not set
-+# CONFIG_NLS_CODEPAGE_863 is not set
-+# CONFIG_NLS_CODEPAGE_864 is not set
-+# CONFIG_NLS_CODEPAGE_865 is not set
-+# CONFIG_NLS_CODEPAGE_866 is not set
-+# CONFIG_NLS_CODEPAGE_869 is not set
-+# CONFIG_NLS_CODEPAGE_936 is not set
-+# CONFIG_NLS_CODEPAGE_950 is not set
-+# CONFIG_NLS_CODEPAGE_932 is not set
-+# CONFIG_NLS_CODEPAGE_949 is not set
-+# CONFIG_NLS_CODEPAGE_874 is not set
-+# CONFIG_NLS_ISO8859_8 is not set
-+# CONFIG_NLS_CODEPAGE_1250 is not set
-+# CONFIG_NLS_CODEPAGE_1251 is not set
-+# CONFIG_NLS_ASCII is not set
-+CONFIG_NLS_ISO8859_1=m
-+# CONFIG_NLS_ISO8859_2 is not set
-+# CONFIG_NLS_ISO8859_3 is not set
-+# CONFIG_NLS_ISO8859_4 is not set
-+# CONFIG_NLS_ISO8859_5 is not set
-+# CONFIG_NLS_ISO8859_6 is not set
-+# CONFIG_NLS_ISO8859_7 is not set
-+# CONFIG_NLS_ISO8859_9 is not set
-+# CONFIG_NLS_ISO8859_13 is not set
-+# CONFIG_NLS_ISO8859_14 is not set
-+# CONFIG_NLS_ISO8859_15 is not set
-+# CONFIG_NLS_KOI8_R is not set
-+# CONFIG_NLS_KOI8_U is not set
-+CONFIG_NLS_UTF8=m
-+# CONFIG_DLM is not set
-+CONFIG_INSTRUMENTATION=y
-+CONFIG_PROFILING=y
-+CONFIG_OPROFILE=m
-+CONFIG_KPROBES=y
-+# CONFIG_MARKERS is not set
-+
-+#
-+# Kernel hacking
-+#
-+# CONFIG_PRINTK_TIME is not set
-+CONFIG_ENABLE_WARN_DEPRECATED=y
-+CONFIG_ENABLE_MUST_CHECK=y
-+CONFIG_MAGIC_SYSRQ=y
-+# CONFIG_UNUSED_SYMBOLS is not set
-+CONFIG_DEBUG_FS=y
-+# CONFIG_HEADERS_CHECK is not set
-+CONFIG_DEBUG_KERNEL=y
-+# CONFIG_DEBUG_SHIRQ is not set
-+CONFIG_DETECT_SOFTLOCKUP=y
-+CONFIG_SCHED_DEBUG=y
-+# CONFIG_SCHEDSTATS is not set
-+# CONFIG_TIMER_STATS is not set
-+# CONFIG_DEBUG_RT_MUTEXES is not set
-+# CONFIG_RT_MUTEX_TESTER is not set
-+# CONFIG_DEBUG_SPINLOCK is not set
-+# CONFIG_DEBUG_MUTEXES is not set
-+# CONFIG_DEBUG_LOCK_ALLOC is not set
-+# CONFIG_PROVE_LOCKING is not set
-+# CONFIG_LOCK_STAT is not set
-+# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
-+# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
-+# CONFIG_DEBUG_KOBJECT is not set
-+CONFIG_DEBUG_BUGVERBOSE=y
-+# CONFIG_DEBUG_INFO is not set
-+# CONFIG_DEBUG_VM is not set
-+# CONFIG_DEBUG_LIST is not set
-+# CONFIG_DEBUG_SG is not set
-+CONFIG_FRAME_POINTER=y
-+CONFIG_FORCED_INLINING=y
-+# CONFIG_BOOT_PRINTK_DELAY is not set
-+# CONFIG_RCU_TORTURE_TEST is not set
-+# CONFIG_LKDTM is not set
-+# CONFIG_FAULT_INJECTION is not set
-+# CONFIG_SAMPLES is not set
-+
-+#
-+# Security options
-+#
-+# CONFIG_KEYS is not set
-+# CONFIG_SECURITY is not set
-+# CONFIG_SECURITY_FILE_CAPABILITIES is not set
-+# CONFIG_CRYPTO is not set
-+
-+#
-+# Library routines
-+#
-+CONFIG_BITREVERSE=y
-+CONFIG_CRC_CCITT=m
-+# CONFIG_CRC16 is not set
-+CONFIG_CRC_ITU_T=m
-+CONFIG_CRC32=y
-+CONFIG_CRC7=m
-+# CONFIG_LIBCRC32C is not set
-+CONFIG_AUDIT_GENERIC=y
-+CONFIG_ZLIB_INFLATE=y
-+CONFIG_ZLIB_DEFLATE=y
-+CONFIG_PLIST=y
-+CONFIG_HAS_IOMEM=y
-+CONFIG_HAS_IOPORT=y
-+CONFIG_HAS_DMA=y
-diff -Nrup linux-2.6.24/arch/avr32/configs/atstk1004_defconfig linux-avr32/arch/avr32/configs/atstk1004_defconfig
---- linux-2.6.24/arch/avr32/configs/atstk1004_defconfig 1969-12-31 19:00:00.000000000 -0500
-+++ linux-avr32/arch/avr32/configs/atstk1004_defconfig 2008-02-01 14:51:35.000000000 -0500
-@@ -0,0 +1,621 @@
-+#
-+# Automatically generated make config: don't edit
-+# Linux kernel version: 2.6.24-rc7
-+# Wed Jan 9 23:04:20 2008
-+#
-+CONFIG_AVR32=y
-+CONFIG_GENERIC_GPIO=y
-+CONFIG_GENERIC_HARDIRQS=y
-+CONFIG_STACKTRACE_SUPPORT=y
-+CONFIG_LOCKDEP_SUPPORT=y
-+CONFIG_TRACE_IRQFLAGS_SUPPORT=y
-+CONFIG_HARDIRQS_SW_RESEND=y
-+CONFIG_GENERIC_IRQ_PROBE=y
-+CONFIG_RWSEM_GENERIC_SPINLOCK=y
-+CONFIG_GENERIC_TIME=y
-+# CONFIG_RWSEM_XCHGADD_ALGORITHM is not set
-+# CONFIG_ARCH_HAS_ILOG2_U32 is not set
-+# CONFIG_ARCH_HAS_ILOG2_U64 is not set
-+CONFIG_ARCH_SUPPORTS_OPROFILE=y
-+CONFIG_GENERIC_HWEIGHT=y
-+CONFIG_GENERIC_CALIBRATE_DELAY=y
-+CONFIG_GENERIC_BUG=y
-+CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
-+
-+#
-+# General setup
-+#
-+CONFIG_EXPERIMENTAL=y
-+CONFIG_BROKEN_ON_SMP=y
-+CONFIG_INIT_ENV_ARG_LIMIT=32
-+CONFIG_LOCALVERSION=""
-+# CONFIG_LOCALVERSION_AUTO is not set
-+# CONFIG_SYSVIPC is not set
-+# CONFIG_POSIX_MQUEUE is not set
-+# CONFIG_BSD_PROCESS_ACCT is not set
-+# CONFIG_TASKSTATS is not set
-+# CONFIG_USER_NS is not set
-+# CONFIG_PID_NS is not set
-+# CONFIG_AUDIT is not set
-+# CONFIG_IKCONFIG is not set
-+CONFIG_LOG_BUF_SHIFT=14
-+# CONFIG_CGROUPS is not set
-+# CONFIG_FAIR_GROUP_SCHED is not set
-+CONFIG_SYSFS_DEPRECATED=y
-+# CONFIG_RELAY is not set
-+# CONFIG_BLK_DEV_INITRD is not set
-+CONFIG_CC_OPTIMIZE_FOR_SIZE=y
-+CONFIG_SYSCTL=y
-+CONFIG_EMBEDDED=y
-+# CONFIG_SYSCTL_SYSCALL is not set
-+CONFIG_KALLSYMS=y
-+# CONFIG_KALLSYMS_EXTRA_PASS is not set
-+CONFIG_HOTPLUG=y
-+CONFIG_PRINTK=y
-+CONFIG_BUG=y
-+CONFIG_ELF_CORE=y
-+# CONFIG_BASE_FULL is not set
-+# CONFIG_FUTEX is not set
-+# CONFIG_EPOLL is not set
-+# CONFIG_SIGNALFD is not set
-+# CONFIG_EVENTFD is not set
-+CONFIG_SHMEM=y
-+CONFIG_VM_EVENT_COUNTERS=y
-+# CONFIG_SLAB is not set
-+# CONFIG_SLUB is not set
-+CONFIG_SLOB=y
-+# CONFIG_TINY_SHMEM is not set
-+CONFIG_BASE_SMALL=1
-+# CONFIG_MODULES is not set
-+# CONFIG_BLOCK is not set
-+
-+#
-+# System Type and features
-+#
-+CONFIG_SUBARCH_AVR32B=y
-+CONFIG_MMU=y
-+CONFIG_PERFORMANCE_COUNTERS=y
-+CONFIG_PLATFORM_AT32AP=y
-+CONFIG_CPU_AT32AP700X=y
-+CONFIG_CPU_AT32AP7002=y
-+CONFIG_BOARD_ATSTK1000=y
-+# CONFIG_BOARD_ATNGW100 is not set
-+# CONFIG_BOARD_ATSTK1002 is not set
-+# CONFIG_BOARD_ATSTK1003 is not set
-+CONFIG_BOARD_ATSTK1004=y
-+# CONFIG_BOARD_ATSTK100X_CUSTOM is not set
-+# CONFIG_BOARD_ATSTK100X_SPI1 is not set
-+# CONFIG_BOARD_ATSTK1000_J2_LED is not set
-+CONFIG_BOARD_ATSTK1000_EXTDAC=y
-+CONFIG_LOADER_U_BOOT=y
-+
-+#
-+# Atmel AVR32 AP options
-+#
-+# CONFIG_AP700X_32_BIT_SMC is not set
-+CONFIG_AP700X_16_BIT_SMC=y
-+# CONFIG_AP700X_8_BIT_SMC is not set
-+CONFIG_LOAD_ADDRESS=0x10000000
-+CONFIG_ENTRY_ADDRESS=0x90000000
-+CONFIG_PHYS_OFFSET=0x10000000
-+CONFIG_PREEMPT_NONE=y
-+# CONFIG_PREEMPT_VOLUNTARY is not set
-+# CONFIG_PREEMPT is not set
-+# CONFIG_HAVE_ARCH_BOOTMEM_NODE is not set
-+# CONFIG_ARCH_HAVE_MEMORY_PRESENT is not set
-+# CONFIG_NEED_NODE_MEMMAP_SIZE is not set
-+CONFIG_ARCH_FLATMEM_ENABLE=y
-+# CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set
-+# CONFIG_ARCH_SPARSEMEM_ENABLE is not set
-+CONFIG_SELECT_MEMORY_MODEL=y
-+CONFIG_FLATMEM_MANUAL=y
-+# CONFIG_DISCONTIGMEM_MANUAL is not set
-+# CONFIG_SPARSEMEM_MANUAL is not set
-+CONFIG_FLATMEM=y
-+CONFIG_FLAT_NODE_MEM_MAP=y
-+# CONFIG_SPARSEMEM_STATIC is not set
-+# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
-+CONFIG_SPLIT_PTLOCK_CPUS=4
-+# CONFIG_RESOURCES_64BIT is not set
-+CONFIG_ZONE_DMA_FLAG=0
-+CONFIG_VIRT_TO_BUS=y
-+# CONFIG_OWNERSHIP_TRACE is not set
-+# CONFIG_HZ_100 is not set
-+CONFIG_HZ_250=y
-+# CONFIG_HZ_300 is not set
-+# CONFIG_HZ_1000 is not set
-+CONFIG_HZ=250
-+CONFIG_CMDLINE=""
-+
-+#
-+# Power management options
-+#
-+
-+#
-+# CPU Frequency scaling
-+#
-+CONFIG_CPU_FREQ=y
-+CONFIG_CPU_FREQ_TABLE=y
-+# CONFIG_CPU_FREQ_DEBUG is not set
-+# CONFIG_CPU_FREQ_STAT is not set
-+CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE=y
-+# CONFIG_CPU_FREQ_DEFAULT_GOV_USERSPACE is not set
-+# CONFIG_CPU_FREQ_DEFAULT_GOV_ONDEMAND is not set
-+# CONFIG_CPU_FREQ_DEFAULT_GOV_CONSERVATIVE is not set
-+CONFIG_CPU_FREQ_GOV_PERFORMANCE=y
-+# CONFIG_CPU_FREQ_GOV_POWERSAVE is not set
-+CONFIG_CPU_FREQ_GOV_USERSPACE=y
-+CONFIG_CPU_FREQ_GOV_ONDEMAND=y
-+# CONFIG_CPU_FREQ_GOV_CONSERVATIVE is not set
-+CONFIG_CPU_FREQ_AT32AP=y
-+
-+#
-+# Bus options
-+#
-+# CONFIG_ARCH_SUPPORTS_MSI is not set
-+# CONFIG_PCCARD is not set
-+
-+#
-+# Executable file formats
-+#
-+CONFIG_BINFMT_ELF=y
-+# CONFIG_BINFMT_MISC is not set
-+
-+#
-+# Networking
-+#
-+CONFIG_NET=y
-+
-+#
-+# Networking options
-+#
-+CONFIG_PACKET=y
-+CONFIG_PACKET_MMAP=y
-+CONFIG_UNIX=y
-+# CONFIG_NET_KEY is not set
-+CONFIG_INET=y
-+# CONFIG_IP_MULTICAST is not set
-+# CONFIG_IP_ADVANCED_ROUTER is not set
-+CONFIG_IP_FIB_HASH=y
-+# CONFIG_IP_PNP is not set
-+# CONFIG_NET_IPIP is not set
-+# CONFIG_NET_IPGRE is not set
-+# CONFIG_ARPD is not set
-+# CONFIG_SYN_COOKIES is not set
-+# CONFIG_INET_AH is not set
-+# CONFIG_INET_ESP is not set
-+# CONFIG_INET_IPCOMP is not set
-+# CONFIG_INET_XFRM_TUNNEL is not set
-+# CONFIG_INET_TUNNEL is not set
-+# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
-+# CONFIG_INET_XFRM_MODE_TUNNEL is not set
-+# CONFIG_INET_XFRM_MODE_BEET is not set
-+# CONFIG_INET_LRO is not set
-+# CONFIG_INET_DIAG is not set
-+# CONFIG_TCP_CONG_ADVANCED is not set
-+CONFIG_TCP_CONG_CUBIC=y
-+CONFIG_DEFAULT_TCP_CONG="cubic"
-+# CONFIG_TCP_MD5SIG is not set
-+# CONFIG_IPV6 is not set
-+# CONFIG_INET6_XFRM_TUNNEL is not set
-+# CONFIG_INET6_TUNNEL is not set
-+# CONFIG_NETWORK_SECMARK is not set
-+# CONFIG_NETFILTER is not set
-+# CONFIG_IP_DCCP is not set
-+# CONFIG_IP_SCTP is not set
-+# CONFIG_TIPC is not set
-+# CONFIG_ATM is not set
-+# CONFIG_BRIDGE is not set
-+# CONFIG_VLAN_8021Q is not set
-+# CONFIG_DECNET is not set
-+# CONFIG_LLC2 is not set
-+# CONFIG_IPX is not set
-+# CONFIG_ATALK is not set
-+# CONFIG_X25 is not set
-+# CONFIG_LAPB is not set
-+# CONFIG_ECONET is not set
-+# CONFIG_WAN_ROUTER is not set
-+# CONFIG_NET_SCHED is not set
-+
-+#
-+# Network testing
-+#
-+# CONFIG_NET_PKTGEN is not set
-+# CONFIG_HAMRADIO is not set
-+# CONFIG_IRDA is not set
-+# CONFIG_BT is not set
-+# CONFIG_AF_RXRPC is not set
-+
-+#
-+# Wireless
-+#
-+# CONFIG_CFG80211 is not set
-+# CONFIG_WIRELESS_EXT is not set
-+# CONFIG_MAC80211 is not set
-+# CONFIG_IEEE80211 is not set
-+# CONFIG_RFKILL is not set
-+# CONFIG_NET_9P is not set
-+
-+#
-+# Device Drivers
-+#
-+
-+#
-+# Generic Driver Options
-+#
-+CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
-+CONFIG_STANDALONE=y
-+# CONFIG_PREVENT_FIRMWARE_BUILD is not set
-+# CONFIG_FW_LOADER is not set
-+# CONFIG_SYS_HYPERVISOR is not set
-+# CONFIG_CONNECTOR is not set
-+CONFIG_MTD=y
-+# CONFIG_MTD_DEBUG is not set
-+# CONFIG_MTD_CONCAT is not set
-+CONFIG_MTD_PARTITIONS=y
-+# CONFIG_MTD_REDBOOT_PARTS is not set
-+CONFIG_MTD_CMDLINE_PARTS=y
-+
-+#
-+# User Modules And Translation Layers
-+#
-+CONFIG_MTD_CHAR=y
-+# CONFIG_MTD_OOPS is not set
-+
-+#
-+# RAM/ROM/Flash chip drivers
-+#
-+CONFIG_MTD_CFI=y
-+# CONFIG_MTD_JEDECPROBE is not set
-+CONFIG_MTD_GEN_PROBE=y
-+# CONFIG_MTD_CFI_ADV_OPTIONS is not set
-+CONFIG_MTD_MAP_BANK_WIDTH_1=y
-+CONFIG_MTD_MAP_BANK_WIDTH_2=y
-+CONFIG_MTD_MAP_BANK_WIDTH_4=y
-+# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
-+# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
-+# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
-+CONFIG_MTD_CFI_I1=y
-+CONFIG_MTD_CFI_I2=y
-+# CONFIG_MTD_CFI_I4 is not set
-+# CONFIG_MTD_CFI_I8 is not set
-+# CONFIG_MTD_CFI_INTELEXT is not set
-+CONFIG_MTD_CFI_AMDSTD=y
-+# CONFIG_MTD_CFI_STAA is not set
-+CONFIG_MTD_CFI_UTIL=y
-+# CONFIG_MTD_RAM is not set
-+# CONFIG_MTD_ROM is not set
-+# CONFIG_MTD_ABSENT is not set
-+
-+#
-+# Mapping drivers for chip access
-+#
-+# CONFIG_MTD_COMPLEX_MAPPINGS is not set
-+CONFIG_MTD_PHYSMAP=y
-+CONFIG_MTD_PHYSMAP_START=0x8000000
-+CONFIG_MTD_PHYSMAP_LEN=0x0
-+CONFIG_MTD_PHYSMAP_BANKWIDTH=2
-+# CONFIG_MTD_PLATRAM is not set
-+
-+#
-+# Self-contained MTD device drivers
-+#
-+# CONFIG_MTD_DATAFLASH is not set
-+# CONFIG_MTD_M25P80 is not set
-+# CONFIG_MTD_SLRAM is not set
-+# CONFIG_MTD_PHRAM is not set
-+# CONFIG_MTD_MTDRAM is not set
-+
-+#
-+# Disk-On-Chip Device Drivers
-+#
-+# CONFIG_MTD_DOC2000 is not set
-+# CONFIG_MTD_DOC2001 is not set
-+# CONFIG_MTD_DOC2001PLUS is not set
-+# CONFIG_MTD_NAND is not set
-+# CONFIG_MTD_ONENAND is not set
-+
-+#
-+# UBI - Unsorted block images
-+#
-+# CONFIG_MTD_UBI is not set
-+# CONFIG_PARPORT is not set
-+# CONFIG_MISC_DEVICES is not set
-+
-+#
-+# SCSI device support
-+#
-+# CONFIG_SCSI_DMA is not set
-+# CONFIG_SCSI_NETLINK is not set
-+# CONFIG_NETDEVICES is not set
-+# CONFIG_ISDN is not set
-+# CONFIG_PHONE is not set
-+
-+#
-+# Input device support
-+#
-+# CONFIG_INPUT is not set
-+
-+#
-+# Hardware I/O ports
-+#
-+# CONFIG_SERIO is not set
-+# CONFIG_GAMEPORT is not set
-+
-+#
-+# Character devices
-+#
-+# CONFIG_VT is not set
-+# CONFIG_SERIAL_NONSTANDARD is not set
-+
-+#
-+# Serial drivers
-+#
-+# CONFIG_SERIAL_8250 is not set
-+
-+#
-+# Non-8250 serial port support
-+#
-+CONFIG_SERIAL_ATMEL=y
-+CONFIG_SERIAL_ATMEL_CONSOLE=y
-+# CONFIG_SERIAL_ATMEL_TTYAT is not set
-+CONFIG_SERIAL_CORE=y
-+CONFIG_SERIAL_CORE_CONSOLE=y
-+CONFIG_UNIX98_PTYS=y
-+# CONFIG_LEGACY_PTYS is not set
-+# CONFIG_IPMI_HANDLER is not set
-+# CONFIG_HW_RANDOM is not set
-+# CONFIG_RTC is not set
-+# CONFIG_GEN_RTC is not set
-+# CONFIG_R3964 is not set
-+# CONFIG_TCG_TPM is not set
-+# CONFIG_I2C is not set
-+
-+#
-+# SPI support
-+#
-+CONFIG_SPI=y
-+CONFIG_SPI_MASTER=y
-+
-+#
-+# SPI Master Controller Drivers
-+#
-+CONFIG_SPI_ATMEL=y
-+# CONFIG_SPI_BITBANG is not set
-+
-+#
-+# SPI Protocol Masters
-+#
-+# CONFIG_SPI_AT25 is not set
-+# CONFIG_SPI_SPIDEV is not set
-+# CONFIG_SPI_TLE62X0 is not set
-+# CONFIG_W1 is not set
-+# CONFIG_POWER_SUPPLY is not set
-+# CONFIG_HWMON is not set
-+CONFIG_WATCHDOG=y
-+# CONFIG_WATCHDOG_NOWAYOUT is not set
-+
-+#
-+# Watchdog Device Drivers
-+#
-+# CONFIG_SOFT_WATCHDOG is not set
-+CONFIG_AT32AP700X_WDT=y
-+
-+#
-+# Sonics Silicon Backplane
-+#
-+CONFIG_SSB_POSSIBLE=y
-+# CONFIG_SSB is not set
-+
-+#
-+# Multifunction device drivers
-+#
-+# CONFIG_MFD_SM501 is not set
-+
-+#
-+# Multimedia devices
-+#
-+# CONFIG_VIDEO_DEV is not set
-+# CONFIG_DVB_CORE is not set
-+# CONFIG_DAB is not set
-+
-+#
-+# Graphics support
-+#
-+# CONFIG_VGASTATE is not set
-+# CONFIG_VIDEO_OUTPUT_CONTROL is not set
-+CONFIG_FB=y
-+# CONFIG_FIRMWARE_EDID is not set
-+# CONFIG_FB_DDC is not set
-+CONFIG_FB_CFB_FILLRECT=y
-+CONFIG_FB_CFB_COPYAREA=y
-+CONFIG_FB_CFB_IMAGEBLIT=y
-+# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set
-+# CONFIG_FB_SYS_FILLRECT is not set
-+# CONFIG_FB_SYS_COPYAREA is not set
-+# CONFIG_FB_SYS_IMAGEBLIT is not set
-+# CONFIG_FB_SYS_FOPS is not set
-+CONFIG_FB_DEFERRED_IO=y
-+# CONFIG_FB_SVGALIB is not set
-+# CONFIG_FB_MACMODES is not set
-+# CONFIG_FB_BACKLIGHT is not set
-+# CONFIG_FB_MODE_HELPERS is not set
-+# CONFIG_FB_TILEBLITTING is not set
-+
-+#
-+# Frame buffer hardware drivers
-+#
-+# CONFIG_FB_S1D13XXX is not set
-+CONFIG_FB_ATMEL=y
-+# CONFIG_FB_VIRTUAL is not set
-+CONFIG_BACKLIGHT_LCD_SUPPORT=y
-+CONFIG_LCD_CLASS_DEVICE=y
-+CONFIG_LCD_LTV350QV=y
-+# CONFIG_BACKLIGHT_CLASS_DEVICE is not set
-+
-+#
-+# Display device support
-+#
-+# CONFIG_DISPLAY_SUPPORT is not set
-+# CONFIG_LOGO is not set
-+
-+#
-+# Sound
-+#
-+# CONFIG_SOUND is not set
-+CONFIG_USB_SUPPORT=y
-+# CONFIG_USB_ARCH_HAS_HCD is not set
-+# CONFIG_USB_ARCH_HAS_OHCI is not set
-+# CONFIG_USB_ARCH_HAS_EHCI is not set
-+
-+#
-+# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
-+#
-+
-+#
-+# USB Gadget Support
-+#
-+CONFIG_USB_GADGET=y
-+# CONFIG_USB_GADGET_DEBUG_FILES is not set
-+CONFIG_USB_GADGET_SELECTED=y
-+# CONFIG_USB_GADGET_AMD5536UDC is not set
-+CONFIG_USB_GADGET_ATMEL_USBA=y
-+CONFIG_USB_ATMEL_USBA=y
-+# CONFIG_USB_GADGET_FSL_USB2 is not set
-+# CONFIG_USB_GADGET_NET2280 is not set
-+# CONFIG_USB_GADGET_PXA2XX is not set
-+# CONFIG_USB_GADGET_M66592 is not set
-+# CONFIG_USB_GADGET_GOKU is not set
-+# CONFIG_USB_GADGET_LH7A40X is not set
-+# CONFIG_USB_GADGET_OMAP is not set
-+# CONFIG_USB_GADGET_S3C2410 is not set
-+# CONFIG_USB_GADGET_AT91 is not set
-+# CONFIG_USB_GADGET_DUMMY_HCD is not set
-+CONFIG_USB_GADGET_DUALSPEED=y
-+# CONFIG_USB_ZERO is not set
-+CONFIG_USB_ETH=y
-+# CONFIG_USB_ETH_RNDIS is not set
-+# CONFIG_USB_GADGETFS is not set
-+# CONFIG_USB_FILE_STORAGE is not set
-+# CONFIG_USB_G_SERIAL is not set
-+# CONFIG_USB_MIDI_GADGET is not set
-+# CONFIG_MMC is not set
-+# CONFIG_NEW_LEDS is not set
-+CONFIG_RTC_LIB=y
-+CONFIG_RTC_CLASS=y
-+CONFIG_RTC_HCTOSYS=y
-+CONFIG_RTC_HCTOSYS_DEVICE="rtc0"
-+# CONFIG_RTC_DEBUG is not set
-+
-+#
-+# RTC interfaces
-+#
-+CONFIG_RTC_INTF_SYSFS=y
-+# CONFIG_RTC_INTF_PROC is not set
-+CONFIG_RTC_INTF_DEV=y
-+# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
-+# CONFIG_RTC_DRV_TEST is not set
-+
-+#
-+# SPI RTC drivers
-+#
-+# CONFIG_RTC_DRV_RS5C348 is not set
-+# CONFIG_RTC_DRV_MAX6902 is not set
-+
-+#
-+# Platform RTC drivers
-+#
-+# CONFIG_RTC_DRV_DS1553 is not set
-+# CONFIG_RTC_DRV_STK17TA8 is not set
-+# CONFIG_RTC_DRV_DS1742 is not set
-+# CONFIG_RTC_DRV_M48T86 is not set
-+# CONFIG_RTC_DRV_M48T59 is not set
-+# CONFIG_RTC_DRV_V3020 is not set
-+
-+#
-+# on-CPU RTC drivers
-+#
-+CONFIG_RTC_DRV_AT32AP700X=y
-+
-+#
-+# Userspace I/O
-+#
-+# CONFIG_UIO is not set
-+
-+#
-+# File systems
-+#
-+# CONFIG_INOTIFY is not set
-+# CONFIG_QUOTA is not set
-+# CONFIG_DNOTIFY is not set
-+# CONFIG_AUTOFS_FS is not set
-+# CONFIG_AUTOFS4_FS is not set
-+# CONFIG_FUSE_FS is not set
-+
-+#
-+# Pseudo filesystems
-+#
-+CONFIG_PROC_FS=y
-+CONFIG_PROC_KCORE=y
-+CONFIG_PROC_SYSCTL=y
-+CONFIG_SYSFS=y
-+CONFIG_TMPFS=y
-+# CONFIG_TMPFS_POSIX_ACL is not set
-+# CONFIG_HUGETLB_PAGE is not set
-+# CONFIG_CONFIGFS_FS is not set
-+
-+#
-+# Miscellaneous filesystems
-+#
-+CONFIG_JFFS2_FS=y
-+CONFIG_JFFS2_FS_DEBUG=0
-+# CONFIG_JFFS2_FS_WRITEBUFFER is not set
-+# CONFIG_JFFS2_SUMMARY is not set
-+# CONFIG_JFFS2_FS_XATTR is not set
-+# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set
-+CONFIG_JFFS2_ZLIB=y
-+# CONFIG_JFFS2_LZO is not set
-+CONFIG_JFFS2_RTIME=y
-+# CONFIG_JFFS2_RUBIN is not set
-+# CONFIG_NETWORK_FILESYSTEMS is not set
-+# CONFIG_NLS is not set
-+# CONFIG_DLM is not set
-+# CONFIG_INSTRUMENTATION is not set
-+
-+#
-+# Kernel hacking
-+#
-+# CONFIG_PRINTK_TIME is not set
-+CONFIG_ENABLE_WARN_DEPRECATED=y
-+CONFIG_ENABLE_MUST_CHECK=y
-+CONFIG_MAGIC_SYSRQ=y
-+# CONFIG_UNUSED_SYMBOLS is not set
-+# CONFIG_DEBUG_FS is not set
-+# CONFIG_HEADERS_CHECK is not set
-+# CONFIG_DEBUG_KERNEL is not set
-+# CONFIG_DEBUG_BUGVERBOSE is not set
-+# CONFIG_SAMPLES is not set
-+
-+#
-+# Security options
-+#
-+# CONFIG_KEYS is not set
-+# CONFIG_SECURITY is not set
-+# CONFIG_SECURITY_FILE_CAPABILITIES is not set
-+# CONFIG_CRYPTO is not set
-+
-+#
-+# Library routines
-+#
-+CONFIG_BITREVERSE=y
-+# CONFIG_CRC_CCITT is not set
-+# CONFIG_CRC16 is not set
-+# CONFIG_CRC_ITU_T is not set
-+CONFIG_CRC32=y
-+# CONFIG_CRC7 is not set
-+# CONFIG_LIBCRC32C is not set
-+CONFIG_ZLIB_INFLATE=y
-+CONFIG_ZLIB_DEFLATE=y
-+CONFIG_HAS_IOMEM=y
-+CONFIG_HAS_IOPORT=y
-+CONFIG_HAS_DMA=y
-diff -Nrup linux-2.6.24/arch/avr32/drivers/dw-dmac.c linux-avr32/arch/avr32/drivers/dw-dmac.c
---- linux-2.6.24/arch/avr32/drivers/dw-dmac.c 1969-12-31 19:00:00.000000000 -0500
-+++ linux-avr32/arch/avr32/drivers/dw-dmac.c 2008-02-01 14:51:35.000000000 -0500
-@@ -0,0 +1,761 @@
-+/*
-+ * Driver for the Synopsys DesignWare DMA Controller
-+ *
-+ * Copyright (C) 2005-2006 Atmel Corporation
-+ *
-+ * This program is free software; you can redistribute it and/or modify
-+ * it under the terms of the GNU General Public License version 2 as
-+ * published by the Free Software Foundation.
-+ */
-+#include <linux/clk.h>
-+#include <linux/device.h>
-+#include <linux/dma-mapping.h>
-+#include <linux/dmapool.h>
-+#include <linux/init.h>
-+#include <linux/interrupt.h>
-+#include <linux/module.h>
-+#include <linux/platform_device.h>
-+
-+#include <asm/dma-controller.h>
-+#include <asm/io.h>
-+
-+#include "dw-dmac.h"
-+
-+#define DMAC_NR_CHANNELS 3
-+#define DMAC_MAX_BLOCKSIZE 4095
-+
-+enum {
-+ CH_STATE_FREE = 0,
-+ CH_STATE_ALLOCATED,
-+ CH_STATE_BUSY,
-+};
-+
-+struct dw_dma_lli {
-+ dma_addr_t sar;
-+ dma_addr_t dar;
-+ dma_addr_t llp;
-+ u32 ctllo;
-+ u32 ctlhi;
-+ u32 sstat;
-+ u32 dstat;
-+};
-+
-+struct dw_dma_block {
-+ struct dw_dma_lli *lli_vaddr;
-+ dma_addr_t lli_dma_addr;
-+};
-+
-+struct dw_dma_channel {
-+ unsigned int state;
-+ int is_cyclic;
-+ struct dma_request_sg *req_sg;
-+ struct dma_request_cyclic *req_cyclic;
-+ unsigned int nr_blocks;
-+ int direction;
-+ struct dw_dma_block *block;
-+};
-+
-+struct dw_dma_controller {
-+ spinlock_t lock;
-+ void * __iomem regs;
-+ struct dma_pool *lli_pool;
-+ struct clk *hclk;
-+ struct dma_controller dma;
-+ struct dw_dma_channel channel[DMAC_NR_CHANNELS];
-+};
-+#define to_dw_dmac(dmac) container_of(dmac, struct dw_dma_controller, dma)
-+
-+#define dmac_writel_hi(dmac, reg, value) \
-+ __raw_writel((value), (dmac)->regs + DW_DMAC_##reg + 4)
-+#define dmac_readl_hi(dmac, reg) \
-+ __raw_readl((dmac)->regs + DW_DMAC_##reg + 4)
-+#define dmac_writel_lo(dmac, reg, value) \
-+ __raw_writel((value), (dmac)->regs + DW_DMAC_##reg)
-+#define dmac_readl_lo(dmac, reg) \
-+ __raw_readl((dmac)->regs + DW_DMAC_##reg)
-+#define dmac_chan_writel_hi(dmac, chan, reg, value) \
-+ __raw_writel((value), ((dmac)->regs + 0x58 * (chan) \
-+ + DW_DMAC_CHAN_##reg + 4))
-+#define dmac_chan_readl_hi(dmac, chan, reg) \
-+ __raw_readl((dmac)->regs + 0x58 * (chan) + DW_DMAC_CHAN_##reg + 4)
-+#define dmac_chan_writel_lo(dmac, chan, reg, value) \
-+ __raw_writel((value), (dmac)->regs + 0x58 * (chan) + DW_DMAC_CHAN_##reg)
-+#define dmac_chan_readl_lo(dmac, chan, reg) \
-+ __raw_readl((dmac)->regs + 0x58 * (chan) + DW_DMAC_CHAN_##reg)
-+#define set_channel_bit(dmac, reg, chan) \
-+ dmac_writel_lo(dmac, reg, (1 << (chan)) | (1 << ((chan) + 8)))
-+#define clear_channel_bit(dmac, reg, chan) \
-+ dmac_writel_lo(dmac, reg, (0 << (chan)) | (1 << ((chan) + 8)))
-+
-+static int dmac_alloc_channel(struct dma_controller *_dmac)
-+{
-+ struct dw_dma_controller *dmac = to_dw_dmac(_dmac);
-+ struct dw_dma_channel *chan;
-+ unsigned long flags;
-+ int i;
-+
-+ spin_lock_irqsave(&dmac->lock, flags);
-+ for (i = 0; i < DMAC_NR_CHANNELS; i++)
-+ if (dmac->channel[i].state == CH_STATE_FREE)
-+ break;
-+
-+ if (i < DMAC_NR_CHANNELS) {
-+ chan = &dmac->channel[i];
-+ chan->state = CH_STATE_ALLOCATED;
-+ } else {
-+ i = -EBUSY;
-+ }
-+
-+ spin_unlock_irqrestore(&dmac->lock, flags);
-+
-+ return i;
-+}
-+
-+static void dmac_release_channel(struct dma_controller *_dmac, int channel)
-+{
-+ struct dw_dma_controller *dmac = to_dw_dmac(_dmac);
-+
-+ BUG_ON(channel >= DMAC_NR_CHANNELS
-+ || dmac->channel[channel].state != CH_STATE_ALLOCATED);
-+
-+ dmac->channel[channel].state = CH_STATE_FREE;
-+}
-+
-+static struct dw_dma_block *allocate_blocks(struct dw_dma_controller *dmac,
-+ unsigned int nr_blocks)
-+{
-+ struct dw_dma_block *block;
-+ void *p;
-+ unsigned int i;
-+
-+ block = kmalloc(nr_blocks * sizeof(*block),
-+ GFP_KERNEL);
-+ if (unlikely(!block))
-+ return NULL;
-+
-+ for (i = 0; i < nr_blocks; i++) {
-+ p = dma_pool_alloc(dmac->lli_pool, GFP_KERNEL,
-+ &block[i].lli_dma_addr);
-+ block[i].lli_vaddr = p;
-+ if (unlikely(!p))
-+ goto fail;
-+ }
-+
-+ return block;
-+
-+fail:
-+ for (i = 0; i < nr_blocks; i++) {
-+ if (!block[i].lli_vaddr)
-+ break;
-+ dma_pool_free(dmac->lli_pool, block[i].lli_vaddr,
-+ block[i].lli_dma_addr);
-+ }
-+ kfree(block);
-+ return NULL;
-+}
-+
-+static void cleanup_channel(struct dw_dma_controller *dmac,
-+ struct dw_dma_channel *chan)
-+{
-+ unsigned int i;
-+
-+ if (chan->nr_blocks > 1) {
-+ for (i = 0; i < chan->nr_blocks; i++)
-+ dma_pool_free(dmac->lli_pool, chan->block[i].lli_vaddr,
-+ chan->block[i].lli_dma_addr);
-+ kfree(chan->block);
-+ }
-+
-+ chan->state = CH_STATE_ALLOCATED;
-+}
-+
-+static int dmac_prepare_request_sg(struct dma_controller *_dmac,
-+ struct dma_request_sg *req)
-+{
-+ struct dw_dma_controller *dmac = to_dw_dmac(_dmac);
-+ struct dw_dma_channel *chan;
-+ unsigned long ctlhi, ctllo, cfghi, cfglo;
-+ unsigned long block_size;
-+ unsigned int nr_blocks;
-+ int ret, i, direction;
-+ unsigned long flags;
-+
-+ spin_lock_irqsave(&dmac->lock, flags);
-+
-+ ret = -EINVAL;
-+ if (req->req.channel >= DMAC_NR_CHANNELS
-+ || dmac->channel[req->req.channel].state != CH_STATE_ALLOCATED
-+ || req->block_size > DMAC_MAX_BLOCKSIZE) {
-+ spin_unlock_irqrestore(&dmac->lock, flags);
-+ return -EINVAL;
-+ }
-+
-+ chan = &dmac->channel[req->req.channel];
-+ chan->state = CH_STATE_BUSY;
-+ chan->req_sg = req;
-+ chan->is_cyclic = 0;
-+
-+ /*
-+ * We have marked the channel as busy, so no need to keep the
-+ * lock as long as we only touch the channel-specific
-+ * registers
-+ */
-+ spin_unlock_irqrestore(&dmac->lock, flags);
-+
-+ /*
-+ * There may be limitations in the driver and/or the DMA
-+ * controller that prevents us from sending a whole
-+ * scatterlist item in one go. Taking this into account,
-+ * calculate the number of block transfers we need to set up.
-+ *
-+ * FIXME: Let the peripheral driver know about the maximum
-+ * block size we support. We really don't want to use a
-+ * different block size than what was suggested by the
-+ * peripheral.
-+ *
-+ * Each block will get its own Linked List Item (LLI) below.
-+ */
-+ block_size = req->block_size;
-+ nr_blocks = req->nr_blocks;
-+ pr_debug("block_size %lu, nr_blocks %u nr_sg = %u\n",
-+ block_size, nr_blocks, req->nr_sg);
-+
-+ BUG_ON(nr_blocks == 0);
-+ chan->nr_blocks = nr_blocks;
-+
-+ ret = -EINVAL;
-+ cfglo = cfghi = 0;
-+ switch (req->direction) {
-+ case DMA_DIR_MEM_TO_PERIPH:
-+ direction = DMA_TO_DEVICE;
-+ cfghi = req->periph_id << (43 - 32);
-+ break;
-+
-+ case DMA_DIR_PERIPH_TO_MEM:
-+ direction = DMA_FROM_DEVICE;
-+ cfghi = req->periph_id << (39 - 32);
-+ break;
-+ default:
-+ goto out_unclaim_channel;
-+ }
-+
-+ chan->direction = direction;
-+
-+ dmac_chan_writel_hi(dmac, req->req.channel, CFG, cfghi);
-+ dmac_chan_writel_lo(dmac, req->req.channel, CFG, cfglo);
-+
-+ ctlhi = block_size >> req->width;
-+ ctllo = ((req->direction << 20)
-+ // | (1 << 14) | (1 << 11) // source/dest burst trans len
-+ | (req->width << 4) | (req->width << 1)
-+ | (1 << 0)); // interrupt enable
-+
-+ if (nr_blocks == 1) {
-+ /* Only one block: No need to use block chaining */
-+ if (direction == DMA_TO_DEVICE) {
-+ dmac_chan_writel_lo(dmac, req->req.channel, SAR,
-+ req->sg->dma_address);
-+ dmac_chan_writel_lo(dmac, req->req.channel, DAR,
-+ req->data_reg);
-+ ctllo |= 2 << 7; // no dst increment
-+ } else {
-+ dmac_chan_writel_lo(dmac, req->req.channel, SAR,
-+ req->data_reg);
-+ dmac_chan_writel_lo(dmac, req->req.channel, DAR,
-+ req->sg->dma_address);
-+ ctllo |= 2 << 9; // no src increment
-+ }
-+ dmac_chan_writel_lo(dmac, req->req.channel, CTL, ctllo);
-+ dmac_chan_writel_hi(dmac, req->req.channel, CTL, ctlhi);
-+ pr_debug("ctl hi:lo 0x%lx:%lx\n", ctlhi, ctllo);
-+ } else {
-+ struct dw_dma_lli *lli, *lli_prev = NULL;
-+ int j = 0, offset = 0;
-+
-+ ret = -ENOMEM;
-+ chan->block = allocate_blocks(dmac, nr_blocks);
-+ if (!chan->block)
-+ goto out_unclaim_channel;
-+
-+ if (direction == DMA_TO_DEVICE)
-+ ctllo |= 1 << 28 | 1 << 27 | 2 << 7;
-+ else
-+ ctllo |= 1 << 28 | 1 << 27 | 2 << 9;
-+
-+ /*
-+ * Map scatterlist items to blocks. One scatterlist
-+ * item may need more than one block for the reasons
-+ * mentioned above.
-+ */
-+ for (i = 0; i < nr_blocks; i++) {
-+ lli = chan->block[i].lli_vaddr;
-+ if (lli_prev) {
-+ lli_prev->llp = chan->block[i].lli_dma_addr;
-+ pr_debug("lli[%d] (0x%p/0x%x): 0x%x 0x%x 0x%x 0x%x 0x%x\n",
-+ i - 1, chan->block[i - 1].lli_vaddr,
-+ chan->block[i - 1].lli_dma_addr,
-+ lli_prev->sar, lli_prev->dar, lli_prev->llp,
-+ lli_prev->ctllo, lli_prev->ctlhi);
-+ }
-+ lli->llp = 0;
-+ lli->ctllo = ctllo;
-+ lli->ctlhi = ctlhi;
-+ if (direction == DMA_TO_DEVICE) {
-+ lli->sar = req->sg[j].dma_address + offset;
-+ lli->dar = req->data_reg;
-+ } else {
-+ lli->sar = req->data_reg;
-+ lli->dar = req->sg[j].dma_address + offset;
-+ }
-+ lli_prev = lli;
-+
-+ offset += block_size;
-+ if (offset > req->sg[j].length) {
-+ j++;
-+ offset = 0;
-+ }
-+ }
-+
-+ pr_debug("lli[%d] (0x%p/0x%x): 0x%x 0x%x 0x%x 0x%x 0x%x\n",
-+ i - 1, chan->block[i - 1].lli_vaddr,
-+ chan->block[i - 1].lli_dma_addr, lli_prev->sar,
-+ lli_prev->dar, lli_prev->llp,
-+ lli_prev->ctllo, lli_prev->ctlhi);
-+
-+ /*
-+ * SAR, DAR and CTL are initialized from the LLI. We
-+ * only have to enable the LLI bits in CTL.
-+ */
-+ dmac_chan_writel_hi(dmac, req->req.channel, CTL, 0);
-+ dmac_chan_writel_lo(dmac, req->req.channel, LLP,
-+ chan->block[0].lli_dma_addr);
-+ dmac_chan_writel_lo(dmac, req->req.channel, CTL, 1 << 28 | 1 << 27);
-+ }
-+
-+ set_channel_bit(dmac, MASK_XFER, req->req.channel);
-+ set_channel_bit(dmac, MASK_ERROR, req->req.channel);
-+ if (req->req.block_complete)
-+ set_channel_bit(dmac, MASK_BLOCK, req->req.channel);
-+ else
-+ clear_channel_bit(dmac, MASK_BLOCK, req->req.channel);
-+
-+ return 0;
-+
-+out_unclaim_channel:
-+ chan->state = CH_STATE_ALLOCATED;
-+ return ret;
-+}
-+
-+static int dmac_prepare_request_cyclic(struct dma_controller *_dmac,
-+ struct dma_request_cyclic *req)
-+{
-+ struct dw_dma_controller *dmac = to_dw_dmac(_dmac);
-+ struct dw_dma_channel *chan;
-+ unsigned long ctlhi, ctllo, cfghi, cfglo;
-+ unsigned long block_size;
-+ int ret, i, direction;
-+ unsigned long flags;
-+
-+ spin_lock_irqsave(&dmac->lock, flags);
-+
-+ block_size = (req->buffer_size/req->periods) >> req->width;
-+
-+ ret = -EINVAL;
-+ if (req->req.channel >= DMAC_NR_CHANNELS
-+ || dmac->channel[req->req.channel].state != CH_STATE_ALLOCATED
-+ || (req->periods == 0)
-+ || block_size > DMAC_MAX_BLOCKSIZE) {
-+ spin_unlock_irqrestore(&dmac->lock, flags);
-+ return -EINVAL;
-+ }
-+
-+ chan = &dmac->channel[req->req.channel];
-+ chan->state = CH_STATE_BUSY;
-+ chan->is_cyclic = 1;
-+ chan->req_cyclic = req;
-+
-+ /*
-+ * We have marked the channel as busy, so no need to keep the
-+ * lock as long as we only touch the channel-specific
-+ * registers
-+ */
-+ spin_unlock_irqrestore(&dmac->lock, flags);
-+
-+ /*
-+ Setup
-+ */
-+ BUG_ON(req->buffer_size % req->periods);
-+ /* printk(KERN_INFO "block_size = %lu, periods = %u\n", block_size, req->periods); */
-+
-+ chan->nr_blocks = req->periods;
-+
-+ ret = -EINVAL;
-+ cfglo = cfghi = 0;
-+ switch (req->direction) {
-+ case DMA_DIR_MEM_TO_PERIPH:
-+ direction = DMA_TO_DEVICE;
-+ cfghi = req->periph_id << (43 - 32);
-+ break;
-+
-+ case DMA_DIR_PERIPH_TO_MEM:
-+ direction = DMA_FROM_DEVICE;
-+ cfghi = req->periph_id << (39 - 32);
-+ break;
-+ default:
-+ goto out_unclaim_channel;
-+ }
-+
-+ chan->direction = direction;
-+
-+ dmac_chan_writel_hi(dmac, req->req.channel, CFG, cfghi);
-+ dmac_chan_writel_lo(dmac, req->req.channel, CFG, cfglo);
-+
-+ ctlhi = block_size;
-+ ctllo = ((req->direction << 20)
-+ | (req->width << 4) | (req->width << 1)
-+ | (1 << 0)); // interrupt enable
-+
-+ {
-+ struct dw_dma_lli *lli = NULL, *lli_prev = NULL;
-+
-+ ret = -ENOMEM;
-+ chan->block = allocate_blocks(dmac, req->periods);
-+ if (!chan->block)
-+ goto out_unclaim_channel;
-+
-+ if (direction == DMA_TO_DEVICE)
-+ ctllo |= 1 << 28 | 1 << 27 | 2 << 7;
-+ else
-+ ctllo |= 1 << 28 | 1 << 27 | 2 << 9;
-+
-+ /*
-+ * Set up a linked list items where each period gets
-+ * an item. The linked list item for the last period
-+ * points back to the star of the buffer making a
-+ * cyclic buffer.
-+ */
-+ for (i = 0; i < req->periods; i++) {
-+ lli = chan->block[i].lli_vaddr;
-+ if (lli_prev) {
-+ lli_prev->llp = chan->block[i].lli_dma_addr;
-+ /* printk(KERN_INFO "lli[%d] (0x%p/0x%x): 0x%x 0x%x 0x%x 0x%x 0x%x\n",
-+ i - 1, chan->block[i - 1].lli_vaddr,
-+ chan->block[i - 1].lli_dma_addr,
-+ lli_prev->sar, lli_prev->dar, lli_prev->llp,
-+ lli_prev->ctllo, lli_prev->ctlhi);*/
-+ }
-+ lli->llp = 0;
-+ lli->ctllo = ctllo;
-+ lli->ctlhi = ctlhi;
-+ if (direction == DMA_TO_DEVICE) {
-+ lli->sar = req->buffer_start + i*(block_size << req->width);
-+ lli->dar = req->data_reg;
-+ } else {
-+ lli->sar = req->data_reg;
-+ lli->dar = req->buffer_start + i*(block_size << req->width);
-+ }
-+ lli_prev = lli;
-+ }
-+ lli->llp = chan->block[0].lli_dma_addr;
-+
-+ /*printk(KERN_INFO "lli[%d] (0x%p/0x%x): 0x%x 0x%x 0x%x 0x%x 0x%x\n",
-+ i - 1, chan->block[i - 1].lli_vaddr,
-+ chan->block[i - 1].lli_dma_addr, lli_prev->sar,
-+ lli_prev->dar, lli_prev->llp,
-+ lli_prev->ctllo, lli_prev->ctlhi); */
-+
-+ /*
-+ * SAR, DAR and CTL are initialized from the LLI. We
-+ * only have to enable the LLI bits in CTL.
-+ */
-+ dmac_chan_writel_lo(dmac, req->req.channel, LLP,
-+ chan->block[0].lli_dma_addr);
-+ dmac_chan_writel_lo(dmac, req->req.channel, CTL, 1 << 28 | 1 << 27);
-+ }
-+
-+ clear_channel_bit(dmac, MASK_XFER, req->req.channel);
-+ set_channel_bit(dmac, MASK_ERROR, req->req.channel);
-+ if (req->req.block_complete)
-+ set_channel_bit(dmac, MASK_BLOCK, req->req.channel);
-+ else
-+ clear_channel_bit(dmac, MASK_BLOCK, req->req.channel);
-+
-+ return 0;
-+
-+out_unclaim_channel:
-+ chan->state = CH_STATE_ALLOCATED;
-+ return ret;
-+}
-+
-+static int dmac_start_request(struct dma_controller *_dmac,
-+ unsigned int channel)
-+{
-+ struct dw_dma_controller *dmac = to_dw_dmac(_dmac);
-+
-+ BUG_ON(channel >= DMAC_NR_CHANNELS);
-+
-+ set_channel_bit(dmac, CH_EN, channel);
-+
-+ return 0;
-+}
-+
-+static dma_addr_t dmac_get_current_pos(struct dma_controller *_dmac,
-+ unsigned int channel)
-+{
-+ struct dw_dma_controller *dmac = to_dw_dmac(_dmac);
-+ struct dw_dma_channel *chan;
-+ dma_addr_t current_pos;
-+
-+ BUG_ON(channel >= DMAC_NR_CHANNELS);
-+
-+ chan = &dmac->channel[channel];
-+
-+ switch (chan->direction) {
-+ case DMA_TO_DEVICE:
-+ current_pos = dmac_chan_readl_lo(dmac, channel, SAR);
-+ break;
-+ case DMA_FROM_DEVICE:
-+ current_pos = dmac_chan_readl_lo(dmac, channel, DAR);
-+ break;
-+ default:
-+ return 0;
-+ }
-+
-+
-+ if (!current_pos) {
-+ if (chan->is_cyclic) {
-+ current_pos = chan->req_cyclic->buffer_start;
-+ } else {
-+ current_pos = chan->req_sg->sg->dma_address;
-+ }
-+ }
-+
-+ return current_pos;
-+}
-+
-+
-+static int dmac_stop_request(struct dma_controller *_dmac,
-+ unsigned int channel)
-+{
-+ struct dw_dma_controller *dmac = to_dw_dmac(_dmac);
-+ struct dw_dma_channel *chan;
-+
-+ BUG_ON(channel >= DMAC_NR_CHANNELS);
-+
-+ chan = &dmac->channel[channel];
-+ pr_debug("stop: st%u s%08x d%08x l%08x ctl0x%08x:0x%08x\n",
-+ chan->state, dmac_chan_readl_lo(dmac, channel, SAR),
-+ dmac_chan_readl_lo(dmac, channel, DAR),
-+ dmac_chan_readl_lo(dmac, channel, LLP),
-+ dmac_chan_readl_hi(dmac, channel, CTL),
-+ dmac_chan_readl_lo(dmac, channel, CTL));
-+
-+ if (chan->state == CH_STATE_BUSY) {
-+ clear_channel_bit(dmac, CH_EN, channel);
-+ cleanup_channel(dmac, &dmac->channel[channel]);
-+ }
-+
-+ return 0;
-+}
-+
-+
-+static void dmac_block_complete(struct dw_dma_controller *dmac)
-+{
-+ struct dw_dma_channel *chan;
-+ unsigned long status, chanid;
-+
-+ status = dmac_readl_lo(dmac, STATUS_BLOCK);
-+
-+ while (status) {
-+ struct dma_request *req;
-+ chanid = __ffs(status);
-+ chan = &dmac->channel[chanid];
-+
-+ if (chan->is_cyclic) {
-+ BUG_ON(!chan->req_cyclic
-+ || !chan->req_cyclic->req.block_complete);
-+ req = &chan->req_cyclic->req;
-+ } else {
-+ BUG_ON(!chan->req_sg || !chan->req_sg->req.block_complete);
-+ req = &chan->req_sg->req;
-+ }
-+ dmac_writel_lo(dmac, CLEAR_BLOCK, 1 << chanid);
-+ req->block_complete(req);
-+ status = dmac_readl_lo(dmac, STATUS_BLOCK);
-+ }
-+}
-+
-+static void dmac_xfer_complete(struct dw_dma_controller *dmac)
-+{
-+ struct dw_dma_channel *chan;
-+ struct dma_request *req;
-+ unsigned long status, chanid;
-+
-+ status = dmac_readl_lo(dmac, STATUS_XFER);
-+
-+ while (status) {
-+ chanid = __ffs(status);
-+ chan = &dmac->channel[chanid];
-+
-+ dmac_writel_lo(dmac, CLEAR_XFER, 1 << chanid);
-+
-+ req = &chan->req_sg->req;
-+ BUG_ON(!req);
-+ cleanup_channel(dmac, chan);
-+ if (req->xfer_complete)
-+ req->xfer_complete(req);
-+
-+ status = dmac_readl_lo(dmac, STATUS_XFER);
-+ }
-+}
-+
-+static void dmac_error(struct dw_dma_controller *dmac)
-+{
-+ struct dw_dma_channel *chan;
-+ unsigned long status, chanid;
-+
-+ status = dmac_readl_lo(dmac, STATUS_ERROR);
-+
-+ while (status) {
-+ struct dma_request *req;
-+
-+ chanid = __ffs(status);
-+ chan = &dmac->channel[chanid];
-+
-+ dmac_writel_lo(dmac, CLEAR_ERROR, 1 << chanid);
-+ clear_channel_bit(dmac, CH_EN, chanid);
-+
-+ if (chan->is_cyclic) {
-+ BUG_ON(!chan->req_cyclic);
-+ req = &chan->req_cyclic->req;
-+ } else {
-+ BUG_ON(!chan->req_sg);
-+ req = &chan->req_sg->req;
-+ }
-+
-+ cleanup_channel(dmac, chan);
-+ if (req->error)
-+ req->error(req);
-+
-+ status = dmac_readl_lo(dmac, STATUS_XFER);
-+ }
-+}
-+
-+static irqreturn_t dmac_interrupt(int irq, void *dev_id)
-+{
-+ struct dw_dma_controller *dmac = dev_id;
-+ unsigned long status;
-+ int ret = IRQ_NONE;
-+
-+ spin_lock(&dmac->lock);
-+
-+ status = dmac_readl_lo(dmac, STATUS_INT);
-+
-+ while (status) {
-+ ret = IRQ_HANDLED;
-+ if (status & 0x10)
-+ dmac_error(dmac);
-+ if (status & 0x02)
-+ dmac_block_complete(dmac);
-+ if (status & 0x01)
-+ dmac_xfer_complete(dmac);
-+
-+ status = dmac_readl_lo(dmac, STATUS_INT);
-+ }
-+
-+ spin_unlock(&dmac->lock);
-+ return ret;
-+}
-+
-+static int __devinit dmac_probe(struct platform_device *pdev)
-+{
-+ struct dw_dma_controller *dmac;
-+ struct resource *regs;
-+ int ret;
-+
-+ regs = platform_get_resource(pdev, IORESOURCE_MEM, 0);
-+ if (!regs)
-+ return -ENXIO;
-+
-+ dmac = kmalloc(sizeof(*dmac), GFP_KERNEL);
-+ if (!dmac)
-+ return -ENOMEM;
-+ memset(dmac, 0, sizeof(*dmac));
-+
-+ dmac->hclk = clk_get(&pdev->dev, "hclk");
-+ if (IS_ERR(dmac->hclk)) {
-+ ret = PTR_ERR(dmac->hclk);
-+ goto out_free_dmac;
-+ }
-+ clk_enable(dmac->hclk);
-+
-+ ret = -ENOMEM;
-+ dmac->lli_pool = dma_pool_create("dmac", &pdev->dev,
-+ sizeof(struct dw_dma_lli), 4, 0);
-+ if (!dmac->lli_pool)
-+ goto out_disable_clk;
-+
-+ spin_lock_init(&dmac->lock);
-+ dmac->dma.dev = &pdev->dev;
-+ dmac->dma.alloc_channel = dmac_alloc_channel;
-+ dmac->dma.release_channel = dmac_release_channel;
-+ dmac->dma.prepare_request_sg = dmac_prepare_request_sg;
-+ dmac->dma.prepare_request_cyclic = dmac_prepare_request_cyclic;
-+ dmac->dma.start_request = dmac_start_request;
-+ dmac->dma.stop_request = dmac_stop_request;
-+ dmac->dma.get_current_pos = dmac_get_current_pos;
-+
-+ dmac->regs = ioremap(regs->start, regs->end - regs->start + 1);
-+ if (!dmac->regs)
-+ goto out_free_pool;
-+
-+ ret = request_irq(platform_get_irq(pdev, 0), dmac_interrupt,
-+ IRQF_SAMPLE_RANDOM, pdev->name, dmac);
-+ if (ret)
-+ goto out_unmap_regs;
-+
-+ /* Enable the DMA controller */
-+ dmac_writel_lo(dmac, CFG, 1);
-+
-+ register_dma_controller(&dmac->dma);
-+
-+ printk(KERN_INFO
-+ "dmac%d: DesignWare DMA controller at 0x%p irq %d\n",
-+ dmac->dma.id, dmac->regs, platform_get_irq(pdev, 0));
-+
-+ return 0;
-+
-+out_unmap_regs:
-+ iounmap(dmac->regs);
-+out_free_pool:
-+ dma_pool_destroy(dmac->lli_pool);
-+out_disable_clk:
-+ clk_disable(dmac->hclk);
-+ clk_put(dmac->hclk);
-+out_free_dmac:
-+ kfree(dmac);
-+ return ret;
-+}
-+
-+static struct platform_driver dmac_driver = {
-+ .probe = dmac_probe,
-+ .driver = {
-+ .name = "dmaca",
-+ },
-+};
-+
-+static int __init dmac_init(void)
-+{
-+ return platform_driver_register(&dmac_driver);
-+}
-+subsys_initcall(dmac_init);
-+
-+static void __exit dmac_exit(void)
-+{
-+ platform_driver_unregister(&dmac_driver);
-+}
-+module_exit(dmac_exit);
-+
-+MODULE_DESCRIPTION("Synopsys DesignWare DMA Controller driver");
-+MODULE_AUTHOR("Haavard Skinnemoen <hskinnemoen@atmel.com>");
-+MODULE_LICENSE("GPL");
-diff -Nrup linux-2.6.24/arch/avr32/drivers/dw-dmac.h linux-avr32/arch/avr32/drivers/dw-dmac.h
---- linux-2.6.24/arch/avr32/drivers/dw-dmac.h 1969-12-31 19:00:00.000000000 -0500
-+++ linux-avr32/arch/avr32/drivers/dw-dmac.h 2008-02-01 14:51:35.000000000 -0500
-@@ -0,0 +1,42 @@
-+/*
-+ * Driver for the Synopsys DesignWare DMA Controller
-+ *
-+ * Copyright (C) 2005-2006 Atmel Corporation
-+ *
-+ * This program is free software; you can redistribute it and/or modify
-+ * it under the terms of the GNU General Public License version 2 as
-+ * published by the Free Software Foundation.
-+ */
-+#ifndef __AVR32_DW_DMAC_H__
-+#define __AVR32_DW_DMAC_H__
-+
-+#define DW_DMAC_CFG 0x398
-+#define DW_DMAC_CH_EN 0x3a0
-+
-+#define DW_DMAC_STATUS_XFER 0x2e8
-+#define DW_DMAC_STATUS_BLOCK 0x2f0
-+#define DW_DMAC_STATUS_ERROR 0x308
-+
-+#define DW_DMAC_MASK_XFER 0x310
-+#define DW_DMAC_MASK_BLOCK 0x318
-+#define DW_DMAC_MASK_ERROR 0x330
-+
-+#define DW_DMAC_CLEAR_XFER 0x338
-+#define DW_DMAC_CLEAR_BLOCK 0x340
-+#define DW_DMAC_CLEAR_ERROR 0x358
-+
-+#define DW_DMAC_STATUS_INT 0x360
-+
-+#define DW_DMAC_CHAN_SAR 0x000
-+#define DW_DMAC_CHAN_DAR 0x008
-+#define DW_DMAC_CHAN_LLP 0x010
-+#define DW_DMAC_CHAN_CTL 0x018
-+#define DW_DMAC_CHAN_SSTAT 0x020
-+#define DW_DMAC_CHAN_DSTAT 0x028
-+#define DW_DMAC_CHAN_SSTATAR 0x030
-+#define DW_DMAC_CHAN_DSTATAR 0x038
-+#define DW_DMAC_CHAN_CFG 0x040
-+#define DW_DMAC_CHAN_SGR 0x048
-+#define DW_DMAC_CHAN_DSR 0x050
-+
-+#endif /* __AVR32_DW_DMAC_H__ */
-diff -Nrup linux-2.6.24/arch/avr32/drivers/Makefile linux-avr32/arch/avr32/drivers/Makefile
---- linux-2.6.24/arch/avr32/drivers/Makefile 1969-12-31 19:00:00.000000000 -0500
-+++ linux-avr32/arch/avr32/drivers/Makefile 2008-02-01 14:51:35.000000000 -0500
-@@ -0,0 +1 @@
-+obj-$(CONFIG_DW_DMAC) += dw-dmac.o
-diff -Nrup linux-2.6.24/arch/avr32/Kconfig linux-avr32/arch/avr32/Kconfig
---- linux-2.6.24/arch/avr32/Kconfig 2008-01-24 17:58:37.000000000 -0500
-+++ linux-avr32/arch/avr32/Kconfig 2008-02-01 14:51:35.000000000 -0500
-@@ -54,6 +54,9 @@ config ARCH_HAS_ILOG2_U32
- config ARCH_HAS_ILOG2_U64
- def_bool n
-
-+config ARCH_SUPPORTS_OPROFILE
-+ def_bool y
-+
- config GENERIC_HWEIGHT
- def_bool y
-
-@@ -81,19 +84,23 @@ config PLATFORM_AT32AP
- select MMU
- select PERFORMANCE_COUNTERS
-
--choice
-- prompt "AVR32 CPU type"
-- default CPU_AT32AP7000
-+#
-+# CPU types
-+#
-
--config CPU_AT32AP7000
-- bool "AT32AP7000"
-+# AP7000 derivatives
-+config CPU_AT32AP700X
-+ bool
- select PLATFORM_AT32AP
--endchoice
--
--#
--# CPU Daughterboards for ATSTK1000
--config BOARD_ATSTK1002
-+config CPU_AT32AP7000
-+ bool
-+ select CPU_AT32AP700X
-+config CPU_AT32AP7001
- bool
-+ select CPU_AT32AP700X
-+config CPU_AT32AP7002
-+ bool
-+ select CPU_AT32AP700X
-
- choice
- prompt "AVR32 board type"
-@@ -101,15 +108,18 @@ choice
-
- config BOARD_ATSTK1000
- bool "ATSTK1000 evaluation board"
-- select BOARD_ATSTK1002 if CPU_AT32AP7000
-
- config BOARD_ATNGW100
- bool "ATNGW100 Network Gateway"
-+ select CPU_AT32AP7000
- endchoice
-
- if BOARD_ATSTK1000
- source "arch/avr32/boards/atstk1000/Kconfig"
- endif
-+if BOARD_ATNGW100
-+source "arch/avr32/boards/atngw100/Kconfig"
-+endif
-
- choice
- prompt "Boot loader type"
-@@ -123,15 +133,15 @@ source "arch/avr32/mach-at32ap/Kconfig"
-
- config LOAD_ADDRESS
- hex
-- default 0x10000000 if LOADER_U_BOOT=y && CPU_AT32AP7000=y
-+ default 0x10000000 if LOADER_U_BOOT=y && CPU_AT32AP700X=y
-
- config ENTRY_ADDRESS
- hex
-- default 0x90000000 if LOADER_U_BOOT=y && CPU_AT32AP7000=y
-+ default 0x90000000 if LOADER_U_BOOT=y && CPU_AT32AP700X=y
-
- config PHYS_OFFSET
- hex
-- default 0x10000000 if CPU_AT32AP7000=y
-+ default 0x10000000 if CPU_AT32AP700X=y
-
- source "kernel/Kconfig.preempt"
-
-@@ -163,6 +173,20 @@ config OWNERSHIP_TRACE
- enabling Nexus-compliant debuggers to keep track of the PID of the
- currently executing task.
-
-+config NMI_DEBUGGING
-+ bool "NMI Debugging"
-+ default n
-+ help
-+ Say Y here and pass the nmi_debug command-line parameter to
-+ the kernel to turn on NMI debugging. Depending on the value
-+ of the nmi_debug option, various pieces of information will
-+ be dumped to the console when a Non-Maskable Interrupt
-+ happens.
-+
-+config DW_DMAC
-+ tristate "Synopsys DesignWare DMA Controller support"
-+ default y if CPU_AT32AP7000
-+
- # FPU emulation goes here
-
- source "kernel/Kconfig.hz"
-@@ -219,6 +243,8 @@ source "drivers/Kconfig"
-
- source "fs/Kconfig"
-
-+source "kernel/Kconfig.instrumentation"
-+
- source "arch/avr32/Kconfig.debug"
-
- source "security/Kconfig"
-diff -Nrup linux-2.6.24/arch/avr32/Kconfig.debug linux-avr32/arch/avr32/Kconfig.debug
---- linux-2.6.24/arch/avr32/Kconfig.debug 2008-01-24 17:58:37.000000000 -0500
-+++ linux-avr32/arch/avr32/Kconfig.debug 2008-02-01 14:51:35.000000000 -0500
-@@ -6,14 +6,4 @@ config TRACE_IRQFLAGS_SUPPORT
-
- source "lib/Kconfig.debug"
-
--config KPROBES
-- bool "Kprobes"
-- depends on DEBUG_KERNEL
-- help
-- Kprobes allows you to trap at almost any kernel address and
-- execute a callback function. register_kprobe() establishes
-- a probepoint and specifies the callback. Kprobes is useful
-- for kernel debugging, non-intrusive instrumentation and testing.
-- If in doubt, say "N".
--
- endmenu
-diff -Nrup linux-2.6.24/arch/avr32/kernel/cpu.c linux-avr32/arch/avr32/kernel/cpu.c
---- linux-2.6.24/arch/avr32/kernel/cpu.c 2008-01-24 17:58:37.000000000 -0500
-+++ linux-avr32/arch/avr32/kernel/cpu.c 2008-02-01 14:51:35.000000000 -0500
-@@ -13,6 +13,7 @@
- #include <linux/percpu.h>
- #include <linux/param.h>
- #include <linux/errno.h>
-+#include <linux/clk.h>
-
- #include <asm/setup.h>
- #include <asm/sysreg.h>
-@@ -187,9 +188,20 @@ static int __init topology_init(void)
-
- subsys_initcall(topology_init);
-
-+struct chip_id_map {
-+ u16 mid;
-+ u16 pn;
-+ const char *name;
-+};
-+
-+static const struct chip_id_map chip_names[] = {
-+ { .mid = 0x1f, .pn = 0x1e82, .name = "AT32AP700x" },
-+};
-+#define NR_CHIP_NAMES ARRAY_SIZE(chip_names)
-+
- static const char *cpu_names[] = {
- "Morgan",
-- "AP7000",
-+ "AP7",
- };
- #define NR_CPU_NAMES ARRAY_SIZE(cpu_names)
-
-@@ -206,12 +218,32 @@ static const char *mmu_types[] = {
- "MPU"
- };
-
-+static const char *cpu_feature_flags[] = {
-+ "rmw", "dsp", "simd", "ocd", "perfctr", "java", "fpu",
-+};
-+
-+static const char *get_chip_name(struct avr32_cpuinfo *cpu)
-+{
-+ unsigned int i;
-+ unsigned int mid = avr32_get_manufacturer_id(cpu);
-+ unsigned int pn = avr32_get_product_number(cpu);
-+
-+ for (i = 0; i < NR_CHIP_NAMES; i++) {
-+ if (chip_names[i].mid == mid && chip_names[i].pn == pn)
-+ return chip_names[i].name;
-+ }
-+
-+ return "(unknown)";
-+}
-+
- void __init setup_processor(void)
- {
- unsigned long config0, config1;
- unsigned long features;
- unsigned cpu_id, cpu_rev, arch_id, arch_rev, mmu_type;
-+ unsigned device_id;
- unsigned tmp;
-+ unsigned i;
-
- config0 = sysreg_read(CONFIG0);
- config1 = sysreg_read(CONFIG1);
-@@ -221,11 +253,14 @@ void __init setup_processor(void)
- arch_rev = SYSREG_BFEXT(AR, config0);
- mmu_type = SYSREG_BFEXT(MMUT, config0);
-
-+ device_id = ocd_read(DID);
-+
- boot_cpu_data.arch_type = arch_id;
- boot_cpu_data.cpu_type = cpu_id;
- boot_cpu_data.arch_revision = arch_rev;
- boot_cpu_data.cpu_revision = cpu_rev;
- boot_cpu_data.tlb_config = mmu_type;
-+ boot_cpu_data.device_id = device_id;
-
- tmp = SYSREG_BFEXT(ILSZ, config1);
- if (tmp) {
-@@ -247,41 +282,34 @@ void __init setup_processor(void)
- return;
- }
-
-- printk ("CPU: %s [%02x] revision %d (%s revision %d)\n",
-+ printk ("CPU: %s chip revision %c\n", get_chip_name(&boot_cpu_data),
-+ avr32_get_chip_revision(&boot_cpu_data) + 'A');
-+ printk ("CPU: %s [%02x] core revision %d (%s arch revision %d)\n",
- cpu_names[cpu_id], cpu_id, cpu_rev,
- arch_names[arch_id], arch_rev);
- printk ("CPU: MMU configuration: %s\n", mmu_types[mmu_type]);
-
- printk ("CPU: features:");
- features = 0;
-- if (config0 & SYSREG_BIT(CONFIG0_R)) {
-+ if (config0 & SYSREG_BIT(CONFIG0_R))
- features |= AVR32_FEATURE_RMW;
-- printk(" rmw");
-- }
-- if (config0 & SYSREG_BIT(CONFIG0_D)) {
-+ if (config0 & SYSREG_BIT(CONFIG0_D))
- features |= AVR32_FEATURE_DSP;
-- printk(" dsp");
-- }
-- if (config0 & SYSREG_BIT(CONFIG0_S)) {
-+ if (config0 & SYSREG_BIT(CONFIG0_S))
- features |= AVR32_FEATURE_SIMD;
-- printk(" simd");
-- }
-- if (config0 & SYSREG_BIT(CONFIG0_O)) {
-+ if (config0 & SYSREG_BIT(CONFIG0_O))
- features |= AVR32_FEATURE_OCD;
-- printk(" ocd");
-- }
-- if (config0 & SYSREG_BIT(CONFIG0_P)) {
-+ if (config0 & SYSREG_BIT(CONFIG0_P))
- features |= AVR32_FEATURE_PCTR;
-- printk(" perfctr");
-- }
-- if (config0 & SYSREG_BIT(CONFIG0_J)) {
-+ if (config0 & SYSREG_BIT(CONFIG0_J))
- features |= AVR32_FEATURE_JAVA;
-- printk(" java");
-- }
-- if (config0 & SYSREG_BIT(CONFIG0_F)) {
-+ if (config0 & SYSREG_BIT(CONFIG0_F))
- features |= AVR32_FEATURE_FPU;
-- printk(" fpu");
-- }
-+
-+ for (i = 0; i < ARRAY_SIZE(cpu_feature_flags); i++)
-+ if (features & (1 << i))
-+ printk(" %s", cpu_feature_flags[i]);
-+
- printk("\n");
- boot_cpu_data.features = features;
- }
-@@ -291,6 +319,8 @@ static int c_show(struct seq_file *m, vo
- {
- unsigned int icache_size, dcache_size;
- unsigned int cpu = smp_processor_id();
-+ unsigned int freq;
-+ unsigned int i;
-
- icache_size = boot_cpu_data.icache.ways *
- boot_cpu_data.icache.sets *
-@@ -301,15 +331,21 @@ static int c_show(struct seq_file *m, vo
-
- seq_printf(m, "processor\t: %d\n", cpu);
-
-+ seq_printf(m, "chip type\t: %s revision %c\n",
-+ get_chip_name(&boot_cpu_data),
-+ avr32_get_chip_revision(&boot_cpu_data) + 'A');
- if (boot_cpu_data.arch_type < NR_ARCH_NAMES)
-- seq_printf(m, "cpu family\t: %s revision %d\n",
-+ seq_printf(m, "cpu arch\t: %s revision %d\n",
- arch_names[boot_cpu_data.arch_type],
- boot_cpu_data.arch_revision);
- if (boot_cpu_data.cpu_type < NR_CPU_NAMES)
-- seq_printf(m, "cpu type\t: %s revision %d\n",
-+ seq_printf(m, "cpu core\t: %s revision %d\n",
- cpu_names[boot_cpu_data.cpu_type],
- boot_cpu_data.cpu_revision);
-
-+ freq = (clk_get_rate(boot_cpu_data.clk) + 500) / 1000;
-+ seq_printf(m, "cpu MHz\t\t: %u.%03u\n", freq / 1000, freq % 1000);
-+
- seq_printf(m, "i-cache\t\t: %dK (%u ways x %u sets x %u)\n",
- icache_size >> 10,
- boot_cpu_data.icache.ways,
-@@ -320,7 +356,13 @@ static int c_show(struct seq_file *m, vo
- boot_cpu_data.dcache.ways,
- boot_cpu_data.dcache.sets,
- boot_cpu_data.dcache.linesz);
-- seq_printf(m, "bogomips\t: %lu.%02lu\n",
-+
-+ seq_printf(m, "features\t:");
-+ for (i = 0; i < ARRAY_SIZE(cpu_feature_flags); i++)
-+ if (boot_cpu_data.features & (1 << i))
-+ seq_printf(m, " %s", cpu_feature_flags[i]);
-+
-+ seq_printf(m, "\nbogomips\t: %lu.%02lu\n",
- boot_cpu_data.loops_per_jiffy / (500000/HZ),
- (boot_cpu_data.loops_per_jiffy / (5000/HZ)) % 100);
-
-@@ -343,7 +385,7 @@ static void c_stop(struct seq_file *m, v
-
- }
-
--struct seq_operations cpuinfo_op = {
-+const struct seq_operations cpuinfo_op = {
- .start = c_start,
- .next = c_next,
- .stop = c_stop,
-diff -Nrup linux-2.6.24/arch/avr32/kernel/dma-controller.c linux-avr32/arch/avr32/kernel/dma-controller.c
---- linux-2.6.24/arch/avr32/kernel/dma-controller.c 1969-12-31 19:00:00.000000000 -0500
-+++ linux-avr32/arch/avr32/kernel/dma-controller.c 2008-02-01 14:51:35.000000000 -0500
-@@ -0,0 +1,34 @@
-+/*
-+ * Preliminary DMA controller framework for AVR32
-+ *
-+ * Copyright (C) 2005-2006 Atmel Corporation
-+ *
-+ * This program is free software; you can redistribute it and/or modify
-+ * it under the terms of the GNU General Public License version 2 as
-+ * published by the Free Software Foundation.
-+ */
-+#include <asm/dma-controller.h>
-+
-+static LIST_HEAD(controllers);
-+
-+int register_dma_controller(struct dma_controller *dmac)
-+{
-+ static int next_id;
-+
-+ dmac->id = next_id++;
-+ list_add_tail(&dmac->list, &controllers);
-+
-+ return 0;
-+}
-+EXPORT_SYMBOL(register_dma_controller);
-+
-+struct dma_controller *find_dma_controller(int id)
-+{
-+ struct dma_controller *dmac;
-+
-+ list_for_each_entry(dmac, &controllers, list)
-+ if (dmac->id == id)
-+ return dmac;
-+ return NULL;
-+}
-+EXPORT_SYMBOL(find_dma_controller);
-diff -Nrup linux-2.6.24/arch/avr32/kernel/irq.c linux-avr32/arch/avr32/kernel/irq.c
---- linux-2.6.24/arch/avr32/kernel/irq.c 2008-01-24 17:58:37.000000000 -0500
-+++ linux-avr32/arch/avr32/kernel/irq.c 2008-02-01 14:51:35.000000000 -0500
-@@ -25,6 +25,17 @@ void ack_bad_irq(unsigned int irq)
- printk("unexpected IRQ %u\n", irq);
- }
-
-+/* May be overridden by platform code */
-+int __weak nmi_enable(void)
-+{
-+ return -ENOSYS;
-+}
-+
-+void __weak nmi_disable(void)
-+{
-+
-+}
-+
- #ifdef CONFIG_PROC_FS
- int show_interrupts(struct seq_file *p, void *v)
- {
-diff -Nrup linux-2.6.24/arch/avr32/kernel/kprobes.c linux-avr32/arch/avr32/kernel/kprobes.c
---- linux-2.6.24/arch/avr32/kernel/kprobes.c 2008-01-24 17:58:37.000000000 -0500
-+++ linux-avr32/arch/avr32/kernel/kprobes.c 2008-02-01 14:51:35.000000000 -0500
-@@ -48,6 +48,7 @@ int __kprobes arch_prepare_kprobe(struct
- void __kprobes arch_arm_kprobe(struct kprobe *p)
- {
- pr_debug("arming kprobe at %p\n", p->addr);
-+ ocd_enable(NULL);
- *p->addr = BREAKPOINT_INSTRUCTION;
- flush_icache_range((unsigned long)p->addr,
- (unsigned long)p->addr + sizeof(kprobe_opcode_t));
-@@ -56,6 +57,7 @@ void __kprobes arch_arm_kprobe(struct kp
- void __kprobes arch_disarm_kprobe(struct kprobe *p)
- {
- pr_debug("disarming kprobe at %p\n", p->addr);
-+ ocd_disable(NULL);
- *p->addr = p->opcode;
- flush_icache_range((unsigned long)p->addr,
- (unsigned long)p->addr + sizeof(kprobe_opcode_t));
-@@ -260,9 +262,6 @@ int __kprobes longjmp_break_handler(stru
-
- int __init arch_init_kprobes(void)
- {
-- printk("KPROBES: Enabling monitor mode (MM|DBE)...\n");
-- ocd_write(DC, (1 << OCD_DC_MM_BIT) | (1 << OCD_DC_DBE_BIT));
--
- /* TODO: Register kretprobe trampoline */
- return 0;
- }
-diff -Nrup linux-2.6.24/arch/avr32/kernel/Makefile linux-avr32/arch/avr32/kernel/Makefile
---- linux-2.6.24/arch/avr32/kernel/Makefile 2008-01-24 17:58:37.000000000 -0500
-+++ linux-avr32/arch/avr32/kernel/Makefile 2008-02-01 14:51:35.000000000 -0500
-@@ -6,9 +6,11 @@ extra-y := head.o vmlinux.lds
-
- obj-$(CONFIG_SUBARCH_AVR32B) += entry-avr32b.o
- obj-y += syscall_table.o syscall-stubs.o irq.o
--obj-y += setup.o traps.o semaphore.o ptrace.o
-+obj-y += setup.o traps.o semaphore.o ocd.o ptrace.o
- obj-y += signal.o sys_avr32.o process.o time.o
- obj-y += init_task.o switch_to.o cpu.o
-+obj-y += dma-controller.o
- obj-$(CONFIG_MODULES) += module.o avr32_ksyms.o
- obj-$(CONFIG_KPROBES) += kprobes.o
- obj-$(CONFIG_STACKTRACE) += stacktrace.o
-+obj-$(CONFIG_NMI_DEBUGGING) += nmi_debug.o
-diff -Nrup linux-2.6.24/arch/avr32/kernel/nmi_debug.c linux-avr32/arch/avr32/kernel/nmi_debug.c
---- linux-2.6.24/arch/avr32/kernel/nmi_debug.c 1969-12-31 19:00:00.000000000 -0500
-+++ linux-avr32/arch/avr32/kernel/nmi_debug.c 2008-02-01 14:51:35.000000000 -0500
-@@ -0,0 +1,82 @@
-+/*
-+ * Copyright (C) 2007 Atmel Corporation
-+ *
-+ * This program is free software; you can redistribute it and/or modify
-+ * it under the terms of the GNU General Public License version 2 as
-+ * published by the Free Software Foundation.
-+ */
-+#include <linux/delay.h>
-+#include <linux/kdebug.h>
-+#include <linux/notifier.h>
-+#include <linux/sched.h>
-+
-+#include <asm/irq.h>
-+
-+enum nmi_action {
-+ NMI_SHOW_STATE = 1 << 0,
-+ NMI_SHOW_REGS = 1 << 1,
-+ NMI_DIE = 1 << 2,
-+ NMI_DEBOUNCE = 1 << 3,
-+};
-+
-+static unsigned long nmi_actions;
-+
-+static int nmi_debug_notify(struct notifier_block *self,
-+ unsigned long val, void *data)
-+{
-+ struct die_args *args = data;
-+
-+ if (likely(val != DIE_NMI))
-+ return NOTIFY_DONE;
-+
-+ if (nmi_actions & NMI_SHOW_STATE)
-+ show_state();
-+ if (nmi_actions & NMI_SHOW_REGS)
-+ show_regs(args->regs);
-+ if (nmi_actions & NMI_DEBOUNCE)
-+ mdelay(10);
-+ if (nmi_actions & NMI_DIE)
-+ return NOTIFY_BAD;
-+
-+ return NOTIFY_OK;
-+}
-+
-+static struct notifier_block nmi_debug_nb = {
-+ .notifier_call = nmi_debug_notify,
-+};
-+
-+static int __init nmi_debug_setup(char *str)
-+{
-+ char *p, *sep;
-+
-+ register_die_notifier(&nmi_debug_nb);
-+ if (nmi_enable()) {
-+ printk(KERN_WARNING "Unable to enable NMI.\n");
-+ return 0;
-+ }
-+
-+ if (*str != '=')
-+ return 0;
-+
-+ for (p = str + 1; *p; p = sep + 1) {
-+ sep = strchr(p, ',');
-+ if (sep)
-+ *sep = 0;
-+ if (strcmp(p, "state") == 0)
-+ nmi_actions |= NMI_SHOW_STATE;
-+ else if (strcmp(p, "regs") == 0)
-+ nmi_actions |= NMI_SHOW_REGS;
-+ else if (strcmp(p, "debounce") == 0)
-+ nmi_actions |= NMI_DEBOUNCE;
-+ else if (strcmp(p, "die") == 0)
-+ nmi_actions |= NMI_DIE;
-+ else
-+ printk(KERN_WARNING "NMI: Unrecognized action `%s'\n",
-+ p);
-+ if (!sep)
-+ break;
-+ }
-+
-+ return 0;
-+}
-+__setup("nmi_debug", nmi_debug_setup);
-diff -Nrup linux-2.6.24/arch/avr32/kernel/ocd.c linux-avr32/arch/avr32/kernel/ocd.c
---- linux-2.6.24/arch/avr32/kernel/ocd.c 1969-12-31 19:00:00.000000000 -0500
-+++ linux-avr32/arch/avr32/kernel/ocd.c 2008-02-01 14:51:35.000000000 -0500
-@@ -0,0 +1,163 @@
-+/*
-+ * Copyright (C) 2007 Atmel Corporation
-+ *
-+ * This program is free software; you can redistribute it and/or modify
-+ * it under the terms of the GNU General Public License version 2 as
-+ * published by the Free Software Foundation.
-+ */
-+#include <linux/init.h>
-+#include <linux/sched.h>
-+#include <linux/spinlock.h>
-+
-+#include <asm/ocd.h>
-+
-+static long ocd_count;
-+static spinlock_t ocd_lock;
-+
-+/**
-+ * ocd_enable - enable on-chip debugging
-+ * @child: task to be debugged
-+ *
-+ * If @child is non-NULL, ocd_enable() first checks if debugging has
-+ * already been enabled for @child, and if it has, does nothing.
-+ *
-+ * If @child is NULL (e.g. when debugging the kernel), or debugging
-+ * has not already been enabled for it, ocd_enable() increments the
-+ * reference count and enables the debugging hardware.
-+ */
-+void ocd_enable(struct task_struct *child)
-+{
-+ u32 dc;
-+
-+ if (child)
-+ pr_debug("ocd_enable: child=%s [%u]\n",
-+ child->comm, child->pid);
-+ else
-+ pr_debug("ocd_enable (no child)\n");
-+
-+ if (!child || !test_and_set_tsk_thread_flag(child, TIF_DEBUG)) {
-+ spin_lock(&ocd_lock);
-+ ocd_count++;
-+ dc = ocd_read(DC);
-+ dc |= (1 << OCD_DC_MM_BIT) | (1 << OCD_DC_DBE_BIT);
-+ ocd_write(DC, dc);
-+ spin_unlock(&ocd_lock);
-+ }
-+}
-+
-+/**
-+ * ocd_disable - disable on-chip debugging
-+ * @child: task that was being debugged, but isn't anymore
-+ *
-+ * If @child is non-NULL, ocd_disable() checks if debugging is enabled
-+ * for @child, and if it isn't, does nothing.
-+ *
-+ * If @child is NULL (e.g. when debugging the kernel), or debugging is
-+ * enabled, ocd_disable() decrements the reference count, and if it
-+ * reaches zero, disables the debugging hardware.
-+ */
-+void ocd_disable(struct task_struct *child)
-+{
-+ u32 dc;
-+
-+ if (!child)
-+ pr_debug("ocd_disable (no child)\n");
-+ else if (test_tsk_thread_flag(child, TIF_DEBUG))
-+ pr_debug("ocd_disable: child=%s [%u]\n",
-+ child->comm, child->pid);
-+
-+ if (!child || test_and_clear_tsk_thread_flag(child, TIF_DEBUG)) {
-+ spin_lock(&ocd_lock);
-+ ocd_count--;
-+
-+ WARN_ON(ocd_count < 0);
-+
-+ if (ocd_count <= 0) {
-+ dc = ocd_read(DC);
-+ dc &= ~((1 << OCD_DC_MM_BIT) | (1 << OCD_DC_DBE_BIT));
-+ ocd_write(DC, dc);
-+ }
-+ spin_unlock(&ocd_lock);
-+ }
-+}
-+
-+#ifdef CONFIG_DEBUG_FS
-+#include <linux/debugfs.h>
-+#include <linux/module.h>
-+
-+static struct dentry *ocd_debugfs_root;
-+static struct dentry *ocd_debugfs_DC;
-+static struct dentry *ocd_debugfs_DS;
-+static struct dentry *ocd_debugfs_count;
-+
-+static u64 ocd_DC_get(void *data)
-+{
-+ return ocd_read(DC);
-+}
-+static void ocd_DC_set(void *data, u64 val)
-+{
-+ ocd_write(DC, val);
-+}
-+DEFINE_SIMPLE_ATTRIBUTE(fops_DC, ocd_DC_get, ocd_DC_set, "0x%08llx\n");
-+
-+static u64 ocd_DS_get(void *data)
-+{
-+ return ocd_read(DS);
-+}
-+DEFINE_SIMPLE_ATTRIBUTE(fops_DS, ocd_DS_get, NULL, "0x%08llx\n");
-+
-+static u64 ocd_count_get(void *data)
-+{
-+ return ocd_count;
-+}
-+DEFINE_SIMPLE_ATTRIBUTE(fops_count, ocd_count_get, NULL, "%lld\n");
-+
-+static void ocd_debugfs_init(void)
-+{
-+ struct dentry *root;
-+
-+ root = debugfs_create_dir("ocd", NULL);
-+ if (IS_ERR(root) || !root)
-+ goto err_root;
-+ ocd_debugfs_root = root;
-+
-+ ocd_debugfs_DC = debugfs_create_file("DC", S_IRUSR | S_IWUSR,
-+ root, NULL, &fops_DC);
-+ if (!ocd_debugfs_DC)
-+ goto err_DC;
-+
-+ ocd_debugfs_DS = debugfs_create_file("DS", S_IRUSR, root,
-+ NULL, &fops_DS);
-+ if (!ocd_debugfs_DS)
-+ goto err_DS;
-+
-+ ocd_debugfs_count = debugfs_create_file("count", S_IRUSR, root,
-+ NULL, &fops_count);
-+ if (!ocd_debugfs_count)
-+ goto err_count;
-+
-+ return;
-+
-+err_count:
-+ debugfs_remove(ocd_debugfs_DS);
-+err_DS:
-+ debugfs_remove(ocd_debugfs_DC);
-+err_DC:
-+ debugfs_remove(ocd_debugfs_root);
-+err_root:
-+ printk(KERN_WARNING "OCD: Failed to create debugfs entries\n");
-+}
-+#else
-+static inline void ocd_debugfs_init(void)
-+{
-+
-+}
-+#endif
-+
-+static int __init ocd_init(void)
-+{
-+ spin_lock_init(&ocd_lock);
-+ ocd_debugfs_init();
-+ return 0;
-+}
-+arch_initcall(ocd_init);
-diff -Nrup linux-2.6.24/arch/avr32/kernel/process.c linux-avr32/arch/avr32/kernel/process.c
---- linux-2.6.24/arch/avr32/kernel/process.c 2008-01-24 17:58:37.000000000 -0500
-+++ linux-avr32/arch/avr32/kernel/process.c 2008-02-01 14:51:35.000000000 -0500
-@@ -103,7 +103,7 @@ EXPORT_SYMBOL(kernel_thread);
- */
- void exit_thread(void)
- {
-- /* nothing to do */
-+ ocd_disable(current);
- }
-
- void flush_thread(void)
-@@ -345,6 +345,9 @@ int copy_thread(int nr, unsigned long cl
- p->thread.cpu_context.ksp = (unsigned long)childregs;
- p->thread.cpu_context.pc = (unsigned long)ret_from_fork;
-
-+ if ((clone_flags & CLONE_PTRACE) && test_thread_flag(TIF_DEBUG))
-+ ocd_enable(p);
-+
- return 0;
- }
-
-diff -Nrup linux-2.6.24/arch/avr32/kernel/ptrace.c linux-avr32/arch/avr32/kernel/ptrace.c
---- linux-2.6.24/arch/avr32/kernel/ptrace.c 2008-01-24 17:58:37.000000000 -0500
-+++ linux-avr32/arch/avr32/kernel/ptrace.c 2008-02-01 14:51:35.000000000 -0500
-@@ -58,6 +58,7 @@ void ptrace_disable(struct task_struct *
- {
- clear_tsk_thread_flag(child, TIF_SINGLE_STEP);
- clear_tsk_thread_flag(child, TIF_BREAKPOINT);
-+ ocd_disable(child);
- }
-
- /*
-@@ -144,10 +145,6 @@ long arch_ptrace(struct task_struct *chi
- {
- int ret;
-
-- pr_debug("ptrace: Enabling monitor mode...\n");
-- ocd_write(DC, ocd_read(DC) | (1 << OCD_DC_MM_BIT)
-- | (1 << OCD_DC_DBE_BIT));
--
- switch (request) {
- /* Read the word at location addr in the child process */
- case PTRACE_PEEKTEXT:
-diff -Nrup linux-2.6.24/arch/avr32/kernel/setup.c linux-avr32/arch/avr32/kernel/setup.c
---- linux-2.6.24/arch/avr32/kernel/setup.c 2008-01-24 17:58:37.000000000 -0500
-+++ linux-avr32/arch/avr32/kernel/setup.c 2008-02-01 14:51:35.000000000 -0500
-@@ -273,6 +273,8 @@ static int __init early_parse_fbmem(char
- printk(KERN_WARNING
- "Failed to allocate framebuffer memory\n");
- fbmem_size = 0;
-+ } else {
-+ memset(__va(fbmem_start), 0, fbmem_size);
- }
- }
-
-diff -Nrup linux-2.6.24/arch/avr32/kernel/signal.c linux-avr32/arch/avr32/kernel/signal.c
---- linux-2.6.24/arch/avr32/kernel/signal.c 2008-01-24 17:58:37.000000000 -0500
-+++ linux-avr32/arch/avr32/kernel/signal.c 2008-02-01 14:51:35.000000000 -0500
-@@ -270,19 +270,12 @@ int do_signal(struct pt_regs *regs, sigs
- if (!user_mode(regs))
- return 0;
-
-- if (try_to_freeze()) {
-- signr = 0;
-- if (!signal_pending(current))
-- goto no_signal;
-- }
--
- if (test_thread_flag(TIF_RESTORE_SIGMASK))
- oldset = ¤t->saved_sigmask;
- else if (!oldset)
- oldset = ¤t->blocked;
-
- signr = get_signal_to_deliver(&info, &ka, regs, NULL);
--no_signal:
- if (syscall) {
- switch (regs->r12) {
- case -ERESTART_RESTARTBLOCK:
-diff -Nrup linux-2.6.24/arch/avr32/kernel/traps.c linux-avr32/arch/avr32/kernel/traps.c
---- linux-2.6.24/arch/avr32/kernel/traps.c 2008-01-24 17:58:37.000000000 -0500
-+++ linux-avr32/arch/avr32/kernel/traps.c 2008-02-01 14:51:35.000000000 -0500
-@@ -9,6 +9,7 @@
- #include <linux/bug.h>
- #include <linux/init.h>
- #include <linux/kallsyms.h>
-+#include <linux/kdebug.h>
- #include <linux/module.h>
- #include <linux/notifier.h>
- #include <linux/sched.h>
-@@ -107,9 +108,23 @@ void _exception(long signr, struct pt_re
-
- asmlinkage void do_nmi(unsigned long ecr, struct pt_regs *regs)
- {
-- printk(KERN_ALERT "Got Non-Maskable Interrupt, dumping regs\n");
-- show_regs_log_lvl(regs, KERN_ALERT);
-- show_stack_log_lvl(current, regs->sp, regs, KERN_ALERT);
-+ int ret;
-+
-+ nmi_enter();
-+
-+ ret = notify_die(DIE_NMI, "NMI", regs, 0, ecr, SIGINT);
-+ switch (ret) {
-+ case NOTIFY_OK:
-+ case NOTIFY_STOP:
-+ return;
-+ case NOTIFY_BAD:
-+ die("Fatal Non-Maskable Interrupt", regs, SIGINT);
-+ default:
-+ break;
-+ }
-+
-+ printk(KERN_ALERT "Got NMI, but nobody cared. Disabling...\n");
-+ nmi_disable();
- }
-
- asmlinkage void do_critical_exception(unsigned long ecr, struct pt_regs *regs)
-diff -Nrup linux-2.6.24/arch/avr32/mach-at32ap/at32ap7000.c linux-avr32/arch/avr32/mach-at32ap/at32ap7000.c
---- linux-2.6.24/arch/avr32/mach-at32ap/at32ap7000.c 2008-01-24 17:58:37.000000000 -0500
-+++ linux-avr32/arch/avr32/mach-at32ap/at32ap7000.c 1969-12-31 19:00:00.000000000 -0500
-@@ -1,1730 +0,0 @@
--/*
-- * Copyright (C) 2005-2006 Atmel Corporation
-- *
-- * This program is free software; you can redistribute it and/or modify
-- * it under the terms of the GNU General Public License version 2 as
-- * published by the Free Software Foundation.
-- */
--#include <linux/clk.h>
--#include <linux/fb.h>
--#include <linux/init.h>
--#include <linux/platform_device.h>
--#include <linux/dma-mapping.h>
--#include <linux/spi/spi.h>
--
--#include <asm/io.h>
--
--#include <asm/arch/at32ap7000.h>
--#include <asm/arch/board.h>
--#include <asm/arch/portmux.h>
--
--#include <video/atmel_lcdc.h>
--
--#include "clock.h"
--#include "hmatrix.h"
--#include "pio.h"
--#include "pm.h"
--
--
--#define PBMEM(base) \
-- { \
-- .start = base, \
-- .end = base + 0x3ff, \
-- .flags = IORESOURCE_MEM, \
-- }
--#define IRQ(num) \
-- { \
-- .start = num, \
-- .end = num, \
-- .flags = IORESOURCE_IRQ, \
-- }
--#define NAMED_IRQ(num, _name) \
-- { \
-- .start = num, \
-- .end = num, \
-- .name = _name, \
-- .flags = IORESOURCE_IRQ, \
-- }
--
--/* REVISIT these assume *every* device supports DMA, but several
-- * don't ... tc, smc, pio, rtc, watchdog, pwm, ps2, and more.
-- */
--#define DEFINE_DEV(_name, _id) \
--static u64 _name##_id##_dma_mask = DMA_32BIT_MASK; \
--static struct platform_device _name##_id##_device = { \
-- .name = #_name, \
-- .id = _id, \
-- .dev = { \
-- .dma_mask = &_name##_id##_dma_mask, \
-- .coherent_dma_mask = DMA_32BIT_MASK, \
-- }, \
-- .resource = _name##_id##_resource, \
-- .num_resources = ARRAY_SIZE(_name##_id##_resource), \
--}
--#define DEFINE_DEV_DATA(_name, _id) \
--static u64 _name##_id##_dma_mask = DMA_32BIT_MASK; \
--static struct platform_device _name##_id##_device = { \
-- .name = #_name, \
-- .id = _id, \
-- .dev = { \
-- .dma_mask = &_name##_id##_dma_mask, \
-- .platform_data = &_name##_id##_data, \
-- .coherent_dma_mask = DMA_32BIT_MASK, \
-- }, \
-- .resource = _name##_id##_resource, \
-- .num_resources = ARRAY_SIZE(_name##_id##_resource), \
--}
--
--#define select_peripheral(pin, periph, flags) \
-- at32_select_periph(GPIO_PIN_##pin, GPIO_##periph, flags)
--
--#define DEV_CLK(_name, devname, bus, _index) \
--static struct clk devname##_##_name = { \
-- .name = #_name, \
-- .dev = &devname##_device.dev, \
-- .parent = &bus##_clk, \
-- .mode = bus##_clk_mode, \
-- .get_rate = bus##_clk_get_rate, \
-- .index = _index, \
--}
--
--static DEFINE_SPINLOCK(pm_lock);
--
--unsigned long at32ap7000_osc_rates[3] = {
-- [0] = 32768,
-- /* FIXME: these are ATSTK1002-specific */
-- [1] = 20000000,
-- [2] = 12000000,
--};
--
--static unsigned long osc_get_rate(struct clk *clk)
--{
-- return at32ap7000_osc_rates[clk->index];
--}
--
--static unsigned long pll_get_rate(struct clk *clk, unsigned long control)
--{
-- unsigned long div, mul, rate;
--
-- if (!(control & PM_BIT(PLLEN)))
-- return 0;
--
-- div = PM_BFEXT(PLLDIV, control) + 1;
-- mul = PM_BFEXT(PLLMUL, control) + 1;
--
-- rate = clk->parent->get_rate(clk->parent);
-- rate = (rate + div / 2) / div;
-- rate *= mul;
--
-- return rate;
--}
--
--static unsigned long pll0_get_rate(struct clk *clk)
--{
-- u32 control;
--
-- control = pm_readl(PLL0);
--
-- return pll_get_rate(clk, control);
--}
--
--static unsigned long pll1_get_rate(struct clk *clk)
--{
-- u32 control;
--
-- control = pm_readl(PLL1);
--
-- return pll_get_rate(clk, control);
--}
--
--/*
-- * The AT32AP7000 has five primary clock sources: One 32kHz
-- * oscillator, two crystal oscillators and two PLLs.
-- */
--static struct clk osc32k = {
-- .name = "osc32k",
-- .get_rate = osc_get_rate,
-- .users = 1,
-- .index = 0,
--};
--static struct clk osc0 = {
-- .name = "osc0",
-- .get_rate = osc_get_rate,
-- .users = 1,
-- .index = 1,
--};
--static struct clk osc1 = {
-- .name = "osc1",
-- .get_rate = osc_get_rate,
-- .index = 2,
--};
--static struct clk pll0 = {
-- .name = "pll0",
-- .get_rate = pll0_get_rate,
-- .parent = &osc0,
--};
--static struct clk pll1 = {
-- .name = "pll1",
-- .get_rate = pll1_get_rate,
-- .parent = &osc0,
--};
--
--/*
-- * The main clock can be either osc0 or pll0. The boot loader may
-- * have chosen one for us, so we don't really know which one until we
-- * have a look at the SM.
-- */
--static struct clk *main_clock;
--
--/*
-- * Synchronous clocks are generated from the main clock. The clocks
-- * must satisfy the constraint
-- * fCPU >= fHSB >= fPB
-- * i.e. each clock must not be faster than its parent.
-- */
--static unsigned long bus_clk_get_rate(struct clk *clk, unsigned int shift)
--{
-- return main_clock->get_rate(main_clock) >> shift;
--};
--
--static void cpu_clk_mode(struct clk *clk, int enabled)
--{
-- unsigned long flags;
-- u32 mask;
--
-- spin_lock_irqsave(&pm_lock, flags);
-- mask = pm_readl(CPU_MASK);
-- if (enabled)
-- mask |= 1 << clk->index;
-- else
-- mask &= ~(1 << clk->index);
-- pm_writel(CPU_MASK, mask);
-- spin_unlock_irqrestore(&pm_lock, flags);
--}
--
--static unsigned long cpu_clk_get_rate(struct clk *clk)
--{
-- unsigned long cksel, shift = 0;
--
-- cksel = pm_readl(CKSEL);
-- if (cksel & PM_BIT(CPUDIV))
-- shift = PM_BFEXT(CPUSEL, cksel) + 1;
--
-- return bus_clk_get_rate(clk, shift);
--}
--
--static long cpu_clk_set_rate(struct clk *clk, unsigned long rate, int apply)
--{
-- u32 control;
-- unsigned long parent_rate, child_div, actual_rate, div;
--
-- parent_rate = clk->parent->get_rate(clk->parent);
-- control = pm_readl(CKSEL);
--
-- if (control & PM_BIT(HSBDIV))
-- child_div = 1 << (PM_BFEXT(HSBSEL, control) + 1);
-- else
-- child_div = 1;
--
-- if (rate > 3 * (parent_rate / 4) || child_div == 1) {
-- actual_rate = parent_rate;
-- control &= ~PM_BIT(CPUDIV);
-- } else {
-- unsigned int cpusel;
-- div = (parent_rate + rate / 2) / rate;
-- if (div > child_div)
-- div = child_div;
-- cpusel = (div > 1) ? (fls(div) - 2) : 0;
-- control = PM_BIT(CPUDIV) | PM_BFINS(CPUSEL, cpusel, control);
-- actual_rate = parent_rate / (1 << (cpusel + 1));
-- }
--
-- pr_debug("clk %s: new rate %lu (actual rate %lu)\n",
-- clk->name, rate, actual_rate);
--
-- if (apply)
-- pm_writel(CKSEL, control);
--
-- return actual_rate;
--}
--
--static void hsb_clk_mode(struct clk *clk, int enabled)
--{
-- unsigned long flags;
-- u32 mask;
--
-- spin_lock_irqsave(&pm_lock, flags);
-- mask = pm_readl(HSB_MASK);
-- if (enabled)
-- mask |= 1 << clk->index;
-- else
-- mask &= ~(1 << clk->index);
-- pm_writel(HSB_MASK, mask);
-- spin_unlock_irqrestore(&pm_lock, flags);
--}
--
--static unsigned long hsb_clk_get_rate(struct clk *clk)
--{
-- unsigned long cksel, shift = 0;
--
-- cksel = pm_readl(CKSEL);
-- if (cksel & PM_BIT(HSBDIV))
-- shift = PM_BFEXT(HSBSEL, cksel) + 1;
--
-- return bus_clk_get_rate(clk, shift);
--}
--
--static void pba_clk_mode(struct clk *clk, int enabled)
--{
-- unsigned long flags;
-- u32 mask;
--
-- spin_lock_irqsave(&pm_lock, flags);
-- mask = pm_readl(PBA_MASK);
-- if (enabled)
-- mask |= 1 << clk->index;
-- else
-- mask &= ~(1 << clk->index);
-- pm_writel(PBA_MASK, mask);
-- spin_unlock_irqrestore(&pm_lock, flags);
--}
--
--static unsigned long pba_clk_get_rate(struct clk *clk)
--{
-- unsigned long cksel, shift = 0;
--
-- cksel = pm_readl(CKSEL);
-- if (cksel & PM_BIT(PBADIV))
-- shift = PM_BFEXT(PBASEL, cksel) + 1;
--
-- return bus_clk_get_rate(clk, shift);
--}
--
--static void pbb_clk_mode(struct clk *clk, int enabled)
--{
-- unsigned long flags;
-- u32 mask;
--
-- spin_lock_irqsave(&pm_lock, flags);
-- mask = pm_readl(PBB_MASK);
-- if (enabled)
-- mask |= 1 << clk->index;
-- else
-- mask &= ~(1 << clk->index);
-- pm_writel(PBB_MASK, mask);
-- spin_unlock_irqrestore(&pm_lock, flags);
--}
--
--static unsigned long pbb_clk_get_rate(struct clk *clk)
--{
-- unsigned long cksel, shift = 0;
--
-- cksel = pm_readl(CKSEL);
-- if (cksel & PM_BIT(PBBDIV))
-- shift = PM_BFEXT(PBBSEL, cksel) + 1;
--
-- return bus_clk_get_rate(clk, shift);
--}
--
--static struct clk cpu_clk = {
-- .name = "cpu",
-- .get_rate = cpu_clk_get_rate,
-- .set_rate = cpu_clk_set_rate,
-- .users = 1,
--};
--static struct clk hsb_clk = {
-- .name = "hsb",
-- .parent = &cpu_clk,
-- .get_rate = hsb_clk_get_rate,
--};
--static struct clk pba_clk = {
-- .name = "pba",
-- .parent = &hsb_clk,
-- .mode = hsb_clk_mode,
-- .get_rate = pba_clk_get_rate,
-- .index = 1,
--};
--static struct clk pbb_clk = {
-- .name = "pbb",
-- .parent = &hsb_clk,
-- .mode = hsb_clk_mode,
-- .get_rate = pbb_clk_get_rate,
-- .users = 1,
-- .index = 2,
--};
--
--/* --------------------------------------------------------------------
-- * Generic Clock operations
-- * -------------------------------------------------------------------- */
--
--static void genclk_mode(struct clk *clk, int enabled)
--{
-- u32 control;
--
-- control = pm_readl(GCCTRL(clk->index));
-- if (enabled)
-- control |= PM_BIT(CEN);
-- else
-- control &= ~PM_BIT(CEN);
-- pm_writel(GCCTRL(clk->index), control);
--}
--
--static unsigned long genclk_get_rate(struct clk *clk)
--{
-- u32 control;
-- unsigned long div = 1;
--
-- control = pm_readl(GCCTRL(clk->index));
-- if (control & PM_BIT(DIVEN))
-- div = 2 * (PM_BFEXT(DIV, control) + 1);
--
-- return clk->parent->get_rate(clk->parent) / div;
--}
--
--static long genclk_set_rate(struct clk *clk, unsigned long rate, int apply)
--{
-- u32 control;
-- unsigned long parent_rate, actual_rate, div;
--
-- parent_rate = clk->parent->get_rate(clk->parent);
-- control = pm_readl(GCCTRL(clk->index));
--
-- if (rate > 3 * parent_rate / 4) {
-- actual_rate = parent_rate;
-- control &= ~PM_BIT(DIVEN);
-- } else {
-- div = (parent_rate + rate) / (2 * rate) - 1;
-- control = PM_BFINS(DIV, div, control) | PM_BIT(DIVEN);
-- actual_rate = parent_rate / (2 * (div + 1));
-- }
--
-- dev_dbg(clk->dev, "clk %s: new rate %lu (actual rate %lu)\n",
-- clk->name, rate, actual_rate);
--
-- if (apply)
-- pm_writel(GCCTRL(clk->index), control);
--
-- return actual_rate;
--}
--
--int genclk_set_parent(struct clk *clk, struct clk *parent)
--{
-- u32 control;
--
-- dev_dbg(clk->dev, "clk %s: new parent %s (was %s)\n",
-- clk->name, parent->name, clk->parent->name);
--
-- control = pm_readl(GCCTRL(clk->index));
--
-- if (parent == &osc1 || parent == &pll1)
-- control |= PM_BIT(OSCSEL);
-- else if (parent == &osc0 || parent == &pll0)
-- control &= ~PM_BIT(OSCSEL);
-- else
-- return -EINVAL;
--
-- if (parent == &pll0 || parent == &pll1)
-- control |= PM_BIT(PLLSEL);
-- else
-- control &= ~PM_BIT(PLLSEL);
--
-- pm_writel(GCCTRL(clk->index), control);
-- clk->parent = parent;
--
-- return 0;
--}
--
--static void __init genclk_init_parent(struct clk *clk)
--{
-- u32 control;
-- struct clk *parent;
--
-- BUG_ON(clk->index > 7);
--
-- control = pm_readl(GCCTRL(clk->index));
-- if (control & PM_BIT(OSCSEL))
-- parent = (control & PM_BIT(PLLSEL)) ? &pll1 : &osc1;
-- else
-- parent = (control & PM_BIT(PLLSEL)) ? &pll0 : &osc0;
--
-- clk->parent = parent;
--}
--
--/* --------------------------------------------------------------------
-- * System peripherals
-- * -------------------------------------------------------------------- */
--static struct resource at32_pm0_resource[] = {
-- {
-- .start = 0xfff00000,
-- .end = 0xfff0007f,
-- .flags = IORESOURCE_MEM,
-- },
-- IRQ(20),
--};
--
--static struct resource at32ap700x_rtc0_resource[] = {
-- {
-- .start = 0xfff00080,
-- .end = 0xfff000af,
-- .flags = IORESOURCE_MEM,
-- },
-- IRQ(21),
--};
--
--static struct resource at32_wdt0_resource[] = {
-- {
-- .start = 0xfff000b0,
-- .end = 0xfff000cf,
-- .flags = IORESOURCE_MEM,
-- },
--};
--
--static struct resource at32_eic0_resource[] = {
-- {
-- .start = 0xfff00100,
-- .end = 0xfff0013f,
-- .flags = IORESOURCE_MEM,
-- },
-- IRQ(19),
--};
--
--DEFINE_DEV(at32_pm, 0);
--DEFINE_DEV(at32ap700x_rtc, 0);
--DEFINE_DEV(at32_wdt, 0);
--DEFINE_DEV(at32_eic, 0);
--
--/*
-- * Peripheral clock for PM, RTC, WDT and EIC. PM will ensure that this
-- * is always running.
-- */
--static struct clk at32_pm_pclk = {
-- .name = "pclk",
-- .dev = &at32_pm0_device.dev,
-- .parent = &pbb_clk,
-- .mode = pbb_clk_mode,
-- .get_rate = pbb_clk_get_rate,
-- .users = 1,
-- .index = 0,
--};
--
--static struct resource intc0_resource[] = {
-- PBMEM(0xfff00400),
--};
--struct platform_device at32_intc0_device = {
-- .name = "intc",
-- .id = 0,
-- .resource = intc0_resource,
-- .num_resources = ARRAY_SIZE(intc0_resource),
--};
--DEV_CLK(pclk, at32_intc0, pbb, 1);
--
--static struct clk ebi_clk = {
-- .name = "ebi",
-- .parent = &hsb_clk,
-- .mode = hsb_clk_mode,
-- .get_rate = hsb_clk_get_rate,
-- .users = 1,
--};
--static struct clk hramc_clk = {
-- .name = "hramc",
-- .parent = &hsb_clk,
-- .mode = hsb_clk_mode,
-- .get_rate = hsb_clk_get_rate,
-- .users = 1,
-- .index = 3,
--};
--
--static struct resource smc0_resource[] = {
-- PBMEM(0xfff03400),
--};
--DEFINE_DEV(smc, 0);
--DEV_CLK(pclk, smc0, pbb, 13);
--DEV_CLK(mck, smc0, hsb, 0);
--
--static struct platform_device pdc_device = {
-- .name = "pdc",
-- .id = 0,
--};
--DEV_CLK(hclk, pdc, hsb, 4);
--DEV_CLK(pclk, pdc, pba, 16);
--
--static struct clk pico_clk = {
-- .name = "pico",
-- .parent = &cpu_clk,
-- .mode = cpu_clk_mode,
-- .get_rate = cpu_clk_get_rate,
-- .users = 1,
--};
--
--static struct resource dmaca0_resource[] = {
-- {
-- .start = 0xff200000,
-- .end = 0xff20ffff,
-- .flags = IORESOURCE_MEM,
-- },
-- IRQ(2),
--};
--DEFINE_DEV(dmaca, 0);
--DEV_CLK(hclk, dmaca0, hsb, 10);
--
--/* --------------------------------------------------------------------
-- * HMATRIX
-- * -------------------------------------------------------------------- */
--
--static struct clk hmatrix_clk = {
-- .name = "hmatrix_clk",
-- .parent = &pbb_clk,
-- .mode = pbb_clk_mode,
-- .get_rate = pbb_clk_get_rate,
-- .index = 2,
-- .users = 1,
--};
--#define HMATRIX_BASE ((void __iomem *)0xfff00800)
--
--#define hmatrix_readl(reg) \
-- __raw_readl((HMATRIX_BASE) + HMATRIX_##reg)
--#define hmatrix_writel(reg,value) \
-- __raw_writel((value), (HMATRIX_BASE) + HMATRIX_##reg)
--
--/*
-- * Set bits in the HMATRIX Special Function Register (SFR) used by the
-- * External Bus Interface (EBI). This can be used to enable special
-- * features like CompactFlash support, NAND Flash support, etc. on
-- * certain chipselects.
-- */
--static inline void set_ebi_sfr_bits(u32 mask)
--{
-- u32 sfr;
--
-- clk_enable(&hmatrix_clk);
-- sfr = hmatrix_readl(SFR4);
-- sfr |= mask;
-- hmatrix_writel(SFR4, sfr);
-- clk_disable(&hmatrix_clk);
--}
--
--/* --------------------------------------------------------------------
-- * System Timer/Counter (TC)
-- * -------------------------------------------------------------------- */
--static struct resource at32_systc0_resource[] = {
-- PBMEM(0xfff00c00),
-- IRQ(22),
--};
--struct platform_device at32_systc0_device = {
-- .name = "systc",
-- .id = 0,
-- .resource = at32_systc0_resource,
-- .num_resources = ARRAY_SIZE(at32_systc0_resource),
--};
--DEV_CLK(pclk, at32_systc0, pbb, 3);
--
--/* --------------------------------------------------------------------
-- * PIO
-- * -------------------------------------------------------------------- */
--
--static struct resource pio0_resource[] = {
-- PBMEM(0xffe02800),
-- IRQ(13),
--};
--DEFINE_DEV(pio, 0);
--DEV_CLK(mck, pio0, pba, 10);
--
--static struct resource pio1_resource[] = {
-- PBMEM(0xffe02c00),
-- IRQ(14),
--};
--DEFINE_DEV(pio, 1);
--DEV_CLK(mck, pio1, pba, 11);
--
--static struct resource pio2_resource[] = {
-- PBMEM(0xffe03000),
-- IRQ(15),
--};
--DEFINE_DEV(pio, 2);
--DEV_CLK(mck, pio2, pba, 12);
--
--static struct resource pio3_resource[] = {
-- PBMEM(0xffe03400),
-- IRQ(16),
--};
--DEFINE_DEV(pio, 3);
--DEV_CLK(mck, pio3, pba, 13);
--
--static struct resource pio4_resource[] = {
-- PBMEM(0xffe03800),
-- IRQ(17),
--};
--DEFINE_DEV(pio, 4);
--DEV_CLK(mck, pio4, pba, 14);
--
--void __init at32_add_system_devices(void)
--{
-- platform_device_register(&at32_pm0_device);
-- platform_device_register(&at32_intc0_device);
-- platform_device_register(&at32ap700x_rtc0_device);
-- platform_device_register(&at32_wdt0_device);
-- platform_device_register(&at32_eic0_device);
-- platform_device_register(&smc0_device);
-- platform_device_register(&pdc_device);
-- platform_device_register(&dmaca0_device);
--
-- platform_device_register(&at32_systc0_device);
--
-- platform_device_register(&pio0_device);
-- platform_device_register(&pio1_device);
-- platform_device_register(&pio2_device);
-- platform_device_register(&pio3_device);
-- platform_device_register(&pio4_device);
--}
--
--/* --------------------------------------------------------------------
-- * USART
-- * -------------------------------------------------------------------- */
--
--static struct atmel_uart_data atmel_usart0_data = {
-- .use_dma_tx = 1,
-- .use_dma_rx = 1,
--};
--static struct resource atmel_usart0_resource[] = {
-- PBMEM(0xffe00c00),
-- IRQ(6),
--};
--DEFINE_DEV_DATA(atmel_usart, 0);
--DEV_CLK(usart, atmel_usart0, pba, 3);
--
--static struct atmel_uart_data atmel_usart1_data = {
-- .use_dma_tx = 1,
-- .use_dma_rx = 1,
--};
--static struct resource atmel_usart1_resource[] = {
-- PBMEM(0xffe01000),
-- IRQ(7),
--};
--DEFINE_DEV_DATA(atmel_usart, 1);
--DEV_CLK(usart, atmel_usart1, pba, 4);
--
--static struct atmel_uart_data atmel_usart2_data = {
-- .use_dma_tx = 1,
-- .use_dma_rx = 1,
--};
--static struct resource atmel_usart2_resource[] = {
-- PBMEM(0xffe01400),
-- IRQ(8),
--};
--DEFINE_DEV_DATA(atmel_usart, 2);
--DEV_CLK(usart, atmel_usart2, pba, 5);
--
--static struct atmel_uart_data atmel_usart3_data = {
-- .use_dma_tx = 1,
-- .use_dma_rx = 1,
--};
--static struct resource atmel_usart3_resource[] = {
-- PBMEM(0xffe01800),
-- IRQ(9),
--};
--DEFINE_DEV_DATA(atmel_usart, 3);
--DEV_CLK(usart, atmel_usart3, pba, 6);
--
--static inline void configure_usart0_pins(void)
--{
-- select_peripheral(PA(8), PERIPH_B, 0); /* RXD */
-- select_peripheral(PA(9), PERIPH_B, 0); /* TXD */
--}
--
--static inline void configure_usart1_pins(void)
--{
-- select_peripheral(PA(17), PERIPH_A, 0); /* RXD */
-- select_peripheral(PA(18), PERIPH_A, 0); /* TXD */
--}
--
--static inline void configure_usart2_pins(void)
--{
-- select_peripheral(PB(26), PERIPH_B, 0); /* RXD */
-- select_peripheral(PB(27), PERIPH_B, 0); /* TXD */
--}
--
--static inline void configure_usart3_pins(void)
--{
-- select_peripheral(PB(18), PERIPH_B, 0); /* RXD */
-- select_peripheral(PB(17), PERIPH_B, 0); /* TXD */
--}
--
--static struct platform_device *__initdata at32_usarts[4];
--
--void __init at32_map_usart(unsigned int hw_id, unsigned int line)
--{
-- struct platform_device *pdev;
--
-- switch (hw_id) {
-- case 0:
-- pdev = &atmel_usart0_device;
-- configure_usart0_pins();
-- break;
-- case 1:
-- pdev = &atmel_usart1_device;
-- configure_usart1_pins();
-- break;
-- case 2:
-- pdev = &atmel_usart2_device;
-- configure_usart2_pins();
-- break;
-- case 3:
-- pdev = &atmel_usart3_device;
-- configure_usart3_pins();
-- break;
-- default:
-- return;
-- }
--
-- if (PXSEG(pdev->resource[0].start) == P4SEG) {
-- /* Addresses in the P4 segment are permanently mapped 1:1 */
-- struct atmel_uart_data *data = pdev->dev.platform_data;
-- data->regs = (void __iomem *)pdev->resource[0].start;
-- }
--
-- pdev->id = line;
-- at32_usarts[line] = pdev;
--}
--
--struct platform_device *__init at32_add_device_usart(unsigned int id)
--{
-- platform_device_register(at32_usarts[id]);
-- return at32_usarts[id];
--}
--
--struct platform_device *atmel_default_console_device;
--
--void __init at32_setup_serial_console(unsigned int usart_id)
--{
-- atmel_default_console_device = at32_usarts[usart_id];
--}
--
--/* --------------------------------------------------------------------
-- * Ethernet
-- * -------------------------------------------------------------------- */
--
--static struct eth_platform_data macb0_data;
--static struct resource macb0_resource[] = {
-- PBMEM(0xfff01800),
-- IRQ(25),
--};
--DEFINE_DEV_DATA(macb, 0);
--DEV_CLK(hclk, macb0, hsb, 8);
--DEV_CLK(pclk, macb0, pbb, 6);
--
--static struct eth_platform_data macb1_data;
--static struct resource macb1_resource[] = {
-- PBMEM(0xfff01c00),
-- IRQ(26),
--};
--DEFINE_DEV_DATA(macb, 1);
--DEV_CLK(hclk, macb1, hsb, 9);
--DEV_CLK(pclk, macb1, pbb, 7);
--
--struct platform_device *__init
--at32_add_device_eth(unsigned int id, struct eth_platform_data *data)
--{
-- struct platform_device *pdev;
--
-- switch (id) {
-- case 0:
-- pdev = &macb0_device;
--
-- select_peripheral(PC(3), PERIPH_A, 0); /* TXD0 */
-- select_peripheral(PC(4), PERIPH_A, 0); /* TXD1 */
-- select_peripheral(PC(7), PERIPH_A, 0); /* TXEN */
-- select_peripheral(PC(8), PERIPH_A, 0); /* TXCK */
-- select_peripheral(PC(9), PERIPH_A, 0); /* RXD0 */
-- select_peripheral(PC(10), PERIPH_A, 0); /* RXD1 */
-- select_peripheral(PC(13), PERIPH_A, 0); /* RXER */
-- select_peripheral(PC(15), PERIPH_A, 0); /* RXDV */
-- select_peripheral(PC(16), PERIPH_A, 0); /* MDC */
-- select_peripheral(PC(17), PERIPH_A, 0); /* MDIO */
--
-- if (!data->is_rmii) {
-- select_peripheral(PC(0), PERIPH_A, 0); /* COL */
-- select_peripheral(PC(1), PERIPH_A, 0); /* CRS */
-- select_peripheral(PC(2), PERIPH_A, 0); /* TXER */
-- select_peripheral(PC(5), PERIPH_A, 0); /* TXD2 */
-- select_peripheral(PC(6), PERIPH_A, 0); /* TXD3 */
-- select_peripheral(PC(11), PERIPH_A, 0); /* RXD2 */
-- select_peripheral(PC(12), PERIPH_A, 0); /* RXD3 */
-- select_peripheral(PC(14), PERIPH_A, 0); /* RXCK */
-- select_peripheral(PC(18), PERIPH_A, 0); /* SPD */
-- }
-- break;
--
-- case 1:
-- pdev = &macb1_device;
--
-- select_peripheral(PD(13), PERIPH_B, 0); /* TXD0 */
-- select_peripheral(PD(14), PERIPH_B, 0); /* TXD1 */
-- select_peripheral(PD(11), PERIPH_B, 0); /* TXEN */
-- select_peripheral(PD(12), PERIPH_B, 0); /* TXCK */
-- select_peripheral(PD(10), PERIPH_B, 0); /* RXD0 */
-- select_peripheral(PD(6), PERIPH_B, 0); /* RXD1 */
-- select_peripheral(PD(5), PERIPH_B, 0); /* RXER */
-- select_peripheral(PD(4), PERIPH_B, 0); /* RXDV */
-- select_peripheral(PD(3), PERIPH_B, 0); /* MDC */
-- select_peripheral(PD(2), PERIPH_B, 0); /* MDIO */
--
-- if (!data->is_rmii) {
-- select_peripheral(PC(19), PERIPH_B, 0); /* COL */
-- select_peripheral(PC(23), PERIPH_B, 0); /* CRS */
-- select_peripheral(PC(26), PERIPH_B, 0); /* TXER */
-- select_peripheral(PC(27), PERIPH_B, 0); /* TXD2 */
-- select_peripheral(PC(28), PERIPH_B, 0); /* TXD3 */
-- select_peripheral(PC(29), PERIPH_B, 0); /* RXD2 */
-- select_peripheral(PC(30), PERIPH_B, 0); /* RXD3 */
-- select_peripheral(PC(24), PERIPH_B, 0); /* RXCK */
-- select_peripheral(PD(15), PERIPH_B, 0); /* SPD */
-- }
-- break;
--
-- default:
-- return NULL;
-- }
--
-- memcpy(pdev->dev.platform_data, data, sizeof(struct eth_platform_data));
-- platform_device_register(pdev);
--
-- return pdev;
--}
--
--/* --------------------------------------------------------------------
-- * SPI
-- * -------------------------------------------------------------------- */
--static struct resource atmel_spi0_resource[] = {
-- PBMEM(0xffe00000),
-- IRQ(3),
--};
--DEFINE_DEV(atmel_spi, 0);
--DEV_CLK(spi_clk, atmel_spi0, pba, 0);
--
--static struct resource atmel_spi1_resource[] = {
-- PBMEM(0xffe00400),
-- IRQ(4),
--};
--DEFINE_DEV(atmel_spi, 1);
--DEV_CLK(spi_clk, atmel_spi1, pba, 1);
--
--static void __init
--at32_spi_setup_slaves(unsigned int bus_num, struct spi_board_info *b,
-- unsigned int n, const u8 *pins)
--{
-- unsigned int pin, mode;
--
-- for (; n; n--, b++) {
-- b->bus_num = bus_num;
-- if (b->chip_select >= 4)
-- continue;
-- pin = (unsigned)b->controller_data;
-- if (!pin) {
-- pin = pins[b->chip_select];
-- b->controller_data = (void *)pin;
-- }
-- mode = AT32_GPIOF_OUTPUT;
-- if (!(b->mode & SPI_CS_HIGH))
-- mode |= AT32_GPIOF_HIGH;
-- at32_select_gpio(pin, mode);
-- }
--}
--
--struct platform_device *__init
--at32_add_device_spi(unsigned int id, struct spi_board_info *b, unsigned int n)
--{
-- /*
-- * Manage the chipselects as GPIOs, normally using the same pins
-- * the SPI controller expects; but boards can use other pins.
-- */
-- static u8 __initdata spi0_pins[] =
-- { GPIO_PIN_PA(3), GPIO_PIN_PA(4),
-- GPIO_PIN_PA(5), GPIO_PIN_PA(20), };
-- static u8 __initdata spi1_pins[] =
-- { GPIO_PIN_PB(2), GPIO_PIN_PB(3),
-- GPIO_PIN_PB(4), GPIO_PIN_PA(27), };
-- struct platform_device *pdev;
--
-- switch (id) {
-- case 0:
-- pdev = &atmel_spi0_device;
-- select_peripheral(PA(0), PERIPH_A, 0); /* MISO */
-- select_peripheral(PA(1), PERIPH_A, 0); /* MOSI */
-- select_peripheral(PA(2), PERIPH_A, 0); /* SCK */
-- at32_spi_setup_slaves(0, b, n, spi0_pins);
-- break;
--
-- case 1:
-- pdev = &atmel_spi1_device;
-- select_peripheral(PB(0), PERIPH_B, 0); /* MISO */
-- select_peripheral(PB(1), PERIPH_B, 0); /* MOSI */
-- select_peripheral(PB(5), PERIPH_B, 0); /* SCK */
-- at32_spi_setup_slaves(1, b, n, spi1_pins);
-- break;
--
-- default:
-- return NULL;
-- }
--
-- spi_register_board_info(b, n);
-- platform_device_register(pdev);
-- return pdev;
--}
--
--/* --------------------------------------------------------------------
-- * TWI
-- * -------------------------------------------------------------------- */
--static struct resource atmel_twi0_resource[] __initdata = {
-- PBMEM(0xffe00800),
-- IRQ(5),
--};
--static struct clk atmel_twi0_pclk = {
-- .name = "twi_pclk",
-- .parent = &pba_clk,
-- .mode = pba_clk_mode,
-- .get_rate = pba_clk_get_rate,
-- .index = 2,
--};
--
--struct platform_device *__init at32_add_device_twi(unsigned int id)
--{
-- struct platform_device *pdev;
--
-- if (id != 0)
-- return NULL;
--
-- pdev = platform_device_alloc("atmel_twi", id);
-- if (!pdev)
-- return NULL;
--
-- if (platform_device_add_resources(pdev, atmel_twi0_resource,
-- ARRAY_SIZE(atmel_twi0_resource)))
-- goto err_add_resources;
--
-- select_peripheral(PA(6), PERIPH_A, 0); /* SDA */
-- select_peripheral(PA(7), PERIPH_A, 0); /* SDL */
--
-- atmel_twi0_pclk.dev = &pdev->dev;
--
-- platform_device_add(pdev);
-- return pdev;
--
--err_add_resources:
-- platform_device_put(pdev);
-- return NULL;
--}
--
--/* --------------------------------------------------------------------
-- * MMC
-- * -------------------------------------------------------------------- */
--static struct resource atmel_mci0_resource[] __initdata = {
-- PBMEM(0xfff02400),
-- IRQ(28),
--};
--static struct clk atmel_mci0_pclk = {
-- .name = "mci_clk",
-- .parent = &pbb_clk,
-- .mode = pbb_clk_mode,
-- .get_rate = pbb_clk_get_rate,
-- .index = 9,
--};
--
--struct platform_device *__init at32_add_device_mci(unsigned int id)
--{
-- struct platform_device *pdev;
--
-- if (id != 0)
-- return NULL;
--
-- pdev = platform_device_alloc("atmel_mci", id);
-- if (!pdev)
-- return NULL;
--
-- if (platform_device_add_resources(pdev, atmel_mci0_resource,
-- ARRAY_SIZE(atmel_mci0_resource)))
-- goto err_add_resources;
--
-- select_peripheral(PA(10), PERIPH_A, 0); /* CLK */
-- select_peripheral(PA(11), PERIPH_A, 0); /* CMD */
-- select_peripheral(PA(12), PERIPH_A, 0); /* DATA0 */
-- select_peripheral(PA(13), PERIPH_A, 0); /* DATA1 */
-- select_peripheral(PA(14), PERIPH_A, 0); /* DATA2 */
-- select_peripheral(PA(15), PERIPH_A, 0); /* DATA3 */
--
-- atmel_mci0_pclk.dev = &pdev->dev;
--
-- platform_device_add(pdev);
-- return pdev;
--
--err_add_resources:
-- platform_device_put(pdev);
-- return NULL;
--}
--
--/* --------------------------------------------------------------------
-- * LCDC
-- * -------------------------------------------------------------------- */
--static struct atmel_lcdfb_info atmel_lcdfb0_data;
--static struct resource atmel_lcdfb0_resource[] = {
-- {
-- .start = 0xff000000,
-- .end = 0xff000fff,
-- .flags = IORESOURCE_MEM,
-- },
-- IRQ(1),
-- {
-- /* Placeholder for pre-allocated fb memory */
-- .start = 0x00000000,
-- .end = 0x00000000,
-- .flags = 0,
-- },
--};
--DEFINE_DEV_DATA(atmel_lcdfb, 0);
--DEV_CLK(hck1, atmel_lcdfb0, hsb, 7);
--static struct clk atmel_lcdfb0_pixclk = {
-- .name = "lcdc_clk",
-- .dev = &atmel_lcdfb0_device.dev,
-- .mode = genclk_mode,
-- .get_rate = genclk_get_rate,
-- .set_rate = genclk_set_rate,
-- .set_parent = genclk_set_parent,
-- .index = 7,
--};
--
--struct platform_device *__init
--at32_add_device_lcdc(unsigned int id, struct atmel_lcdfb_info *data,
-- unsigned long fbmem_start, unsigned long fbmem_len)
--{
-- struct platform_device *pdev;
-- struct atmel_lcdfb_info *info;
-- struct fb_monspecs *monspecs;
-- struct fb_videomode *modedb;
-- unsigned int modedb_size;
--
-- /*
-- * Do a deep copy of the fb data, monspecs and modedb. Make
-- * sure all allocations are done before setting up the
-- * portmux.
-- */
-- monspecs = kmemdup(data->default_monspecs,
-- sizeof(struct fb_monspecs), GFP_KERNEL);
-- if (!monspecs)
-- return NULL;
--
-- modedb_size = sizeof(struct fb_videomode) * monspecs->modedb_len;
-- modedb = kmemdup(monspecs->modedb, modedb_size, GFP_KERNEL);
-- if (!modedb)
-- goto err_dup_modedb;
-- monspecs->modedb = modedb;
--
-- switch (id) {
-- case 0:
-- pdev = &atmel_lcdfb0_device;
-- select_peripheral(PC(19), PERIPH_A, 0); /* CC */
-- select_peripheral(PC(20), PERIPH_A, 0); /* HSYNC */
-- select_peripheral(PC(21), PERIPH_A, 0); /* PCLK */
-- select_peripheral(PC(22), PERIPH_A, 0); /* VSYNC */
-- select_peripheral(PC(23), PERIPH_A, 0); /* DVAL */
-- select_peripheral(PC(24), PERIPH_A, 0); /* MODE */
-- select_peripheral(PC(25), PERIPH_A, 0); /* PWR */
-- select_peripheral(PC(26), PERIPH_A, 0); /* DATA0 */
-- select_peripheral(PC(27), PERIPH_A, 0); /* DATA1 */
-- select_peripheral(PC(28), PERIPH_A, 0); /* DATA2 */
-- select_peripheral(PC(29), PERIPH_A, 0); /* DATA3 */
-- select_peripheral(PC(30), PERIPH_A, 0); /* DATA4 */
-- select_peripheral(PC(31), PERIPH_A, 0); /* DATA5 */
-- select_peripheral(PD(0), PERIPH_A, 0); /* DATA6 */
-- select_peripheral(PD(1), PERIPH_A, 0); /* DATA7 */
-- select_peripheral(PD(2), PERIPH_A, 0); /* DATA8 */
-- select_peripheral(PD(3), PERIPH_A, 0); /* DATA9 */
-- select_peripheral(PD(4), PERIPH_A, 0); /* DATA10 */
-- select_peripheral(PD(5), PERIPH_A, 0); /* DATA11 */
-- select_peripheral(PD(6), PERIPH_A, 0); /* DATA12 */
-- select_peripheral(PD(7), PERIPH_A, 0); /* DATA13 */
-- select_peripheral(PD(8), PERIPH_A, 0); /* DATA14 */
-- select_peripheral(PD(9), PERIPH_A, 0); /* DATA15 */
-- select_peripheral(PD(10), PERIPH_A, 0); /* DATA16 */
-- select_peripheral(PD(11), PERIPH_A, 0); /* DATA17 */
-- select_peripheral(PD(12), PERIPH_A, 0); /* DATA18 */
-- select_peripheral(PD(13), PERIPH_A, 0); /* DATA19 */
-- select_peripheral(PD(14), PERIPH_A, 0); /* DATA20 */
-- select_peripheral(PD(15), PERIPH_A, 0); /* DATA21 */
-- select_peripheral(PD(16), PERIPH_A, 0); /* DATA22 */
-- select_peripheral(PD(17), PERIPH_A, 0); /* DATA23 */
--
-- clk_set_parent(&atmel_lcdfb0_pixclk, &pll0);
-- clk_set_rate(&atmel_lcdfb0_pixclk, clk_get_rate(&pll0));
-- break;
--
-- default:
-- goto err_invalid_id;
-- }
--
-- if (fbmem_len) {
-- pdev->resource[2].start = fbmem_start;
-- pdev->resource[2].end = fbmem_start + fbmem_len - 1;
-- pdev->resource[2].flags = IORESOURCE_MEM;
-- }
--
-- info = pdev->dev.platform_data;
-- memcpy(info, data, sizeof(struct atmel_lcdfb_info));
-- info->default_monspecs = monspecs;
--
-- platform_device_register(pdev);
-- return pdev;
--
--err_invalid_id:
-- kfree(modedb);
--err_dup_modedb:
-- kfree(monspecs);
-- return NULL;
--}
--
--/* --------------------------------------------------------------------
-- * SSC
-- * -------------------------------------------------------------------- */
--static struct resource ssc0_resource[] = {
-- PBMEM(0xffe01c00),
-- IRQ(10),
--};
--DEFINE_DEV(ssc, 0);
--DEV_CLK(pclk, ssc0, pba, 7);
--
--static struct resource ssc1_resource[] = {
-- PBMEM(0xffe02000),
-- IRQ(11),
--};
--DEFINE_DEV(ssc, 1);
--DEV_CLK(pclk, ssc1, pba, 8);
--
--static struct resource ssc2_resource[] = {
-- PBMEM(0xffe02400),
-- IRQ(12),
--};
--DEFINE_DEV(ssc, 2);
--DEV_CLK(pclk, ssc2, pba, 9);
--
--struct platform_device *__init
--at32_add_device_ssc(unsigned int id, unsigned int flags)
--{
-- struct platform_device *pdev;
--
-- switch (id) {
-- case 0:
-- pdev = &ssc0_device;
-- if (flags & ATMEL_SSC_RF)
-- select_peripheral(PA(21), PERIPH_A, 0); /* RF */
-- if (flags & ATMEL_SSC_RK)
-- select_peripheral(PA(22), PERIPH_A, 0); /* RK */
-- if (flags & ATMEL_SSC_TK)
-- select_peripheral(PA(23), PERIPH_A, 0); /* TK */
-- if (flags & ATMEL_SSC_TF)
-- select_peripheral(PA(24), PERIPH_A, 0); /* TF */
-- if (flags & ATMEL_SSC_TD)
-- select_peripheral(PA(25), PERIPH_A, 0); /* TD */
-- if (flags & ATMEL_SSC_RD)
-- select_peripheral(PA(26), PERIPH_A, 0); /* RD */
-- break;
-- case 1:
-- pdev = &ssc1_device;
-- if (flags & ATMEL_SSC_RF)
-- select_peripheral(PA(0), PERIPH_B, 0); /* RF */
-- if (flags & ATMEL_SSC_RK)
-- select_peripheral(PA(1), PERIPH_B, 0); /* RK */
-- if (flags & ATMEL_SSC_TK)
-- select_peripheral(PA(2), PERIPH_B, 0); /* TK */
-- if (flags & ATMEL_SSC_TF)
-- select_peripheral(PA(3), PERIPH_B, 0); /* TF */
-- if (flags & ATMEL_SSC_TD)
-- select_peripheral(PA(4), PERIPH_B, 0); /* TD */
-- if (flags & ATMEL_SSC_RD)
-- select_peripheral(PA(5), PERIPH_B, 0); /* RD */
-- break;
-- case 2:
-- pdev = &ssc2_device;
-- if (flags & ATMEL_SSC_TD)
-- select_peripheral(PB(13), PERIPH_A, 0); /* TD */
-- if (flags & ATMEL_SSC_RD)
-- select_peripheral(PB(14), PERIPH_A, 0); /* RD */
-- if (flags & ATMEL_SSC_TK)
-- select_peripheral(PB(15), PERIPH_A, 0); /* TK */
-- if (flags & ATMEL_SSC_TF)
-- select_peripheral(PB(16), PERIPH_A, 0); /* TF */
-- if (flags & ATMEL_SSC_RF)
-- select_peripheral(PB(17), PERIPH_A, 0); /* RF */
-- if (flags & ATMEL_SSC_RK)
-- select_peripheral(PB(18), PERIPH_A, 0); /* RK */
-- break;
-- default:
-- return NULL;
-- }
--
-- platform_device_register(pdev);
-- return pdev;
--}
--
--/* --------------------------------------------------------------------
-- * USB Device Controller
-- * -------------------------------------------------------------------- */
--static struct resource usba0_resource[] __initdata = {
-- {
-- .start = 0xff300000,
-- .end = 0xff3fffff,
-- .flags = IORESOURCE_MEM,
-- }, {
-- .start = 0xfff03000,
-- .end = 0xfff033ff,
-- .flags = IORESOURCE_MEM,
-- },
-- IRQ(31),
--};
--static struct clk usba0_pclk = {
-- .name = "pclk",
-- .parent = &pbb_clk,
-- .mode = pbb_clk_mode,
-- .get_rate = pbb_clk_get_rate,
-- .index = 12,
--};
--static struct clk usba0_hclk = {
-- .name = "hclk",
-- .parent = &hsb_clk,
-- .mode = hsb_clk_mode,
-- .get_rate = hsb_clk_get_rate,
-- .index = 6,
--};
--
--struct platform_device *__init
--at32_add_device_usba(unsigned int id, struct usba_platform_data *data)
--{
-- struct platform_device *pdev;
--
-- if (id != 0)
-- return NULL;
--
-- pdev = platform_device_alloc("atmel_usba_udc", 0);
-- if (!pdev)
-- return NULL;
--
-- if (platform_device_add_resources(pdev, usba0_resource,
-- ARRAY_SIZE(usba0_resource)))
-- goto out_free_pdev;
--
-- if (data) {
-- if (platform_device_add_data(pdev, data, sizeof(*data)))
-- goto out_free_pdev;
--
-- if (data->vbus_pin != GPIO_PIN_NONE)
-- at32_select_gpio(data->vbus_pin, 0);
-- }
--
-- usba0_pclk.dev = &pdev->dev;
-- usba0_hclk.dev = &pdev->dev;
--
-- platform_device_add(pdev);
--
-- return pdev;
--
--out_free_pdev:
-- platform_device_put(pdev);
-- return NULL;
--}
--
--/* --------------------------------------------------------------------
-- * IDE / CompactFlash
-- * -------------------------------------------------------------------- */
--static struct resource at32_smc_cs4_resource[] __initdata = {
-- {
-- .start = 0x04000000,
-- .end = 0x07ffffff,
-- .flags = IORESOURCE_MEM,
-- },
-- IRQ(~0UL), /* Magic IRQ will be overridden */
--};
--static struct resource at32_smc_cs5_resource[] __initdata = {
-- {
-- .start = 0x20000000,
-- .end = 0x23ffffff,
-- .flags = IORESOURCE_MEM,
-- },
-- IRQ(~0UL), /* Magic IRQ will be overridden */
--};
--
--static int __init at32_init_ide_or_cf(struct platform_device *pdev,
-- unsigned int cs, unsigned int extint)
--{
-- static unsigned int extint_pin_map[4] __initdata = {
-- GPIO_PIN_PB(25),
-- GPIO_PIN_PB(26),
-- GPIO_PIN_PB(27),
-- GPIO_PIN_PB(28),
-- };
-- static bool common_pins_initialized __initdata = false;
-- unsigned int extint_pin;
-- int ret;
--
-- if (extint >= ARRAY_SIZE(extint_pin_map))
-- return -EINVAL;
-- extint_pin = extint_pin_map[extint];
--
-- switch (cs) {
-- case 4:
-- ret = platform_device_add_resources(pdev,
-- at32_smc_cs4_resource,
-- ARRAY_SIZE(at32_smc_cs4_resource));
-- if (ret)
-- return ret;
--
-- select_peripheral(PE(21), PERIPH_A, 0); /* NCS4 -> OE_N */
-- set_ebi_sfr_bits(HMATRIX_BIT(CS4A));
-- break;
-- case 5:
-- ret = platform_device_add_resources(pdev,
-- at32_smc_cs5_resource,
-- ARRAY_SIZE(at32_smc_cs5_resource));
-- if (ret)
-- return ret;
--
-- select_peripheral(PE(22), PERIPH_A, 0); /* NCS5 -> OE_N */
-- set_ebi_sfr_bits(HMATRIX_BIT(CS5A));
-- break;
-- default:
-- return -EINVAL;
-- }
--
-- if (!common_pins_initialized) {
-- select_peripheral(PE(19), PERIPH_A, 0); /* CFCE1 -> CS0_N */
-- select_peripheral(PE(20), PERIPH_A, 0); /* CFCE2 -> CS1_N */
-- select_peripheral(PE(23), PERIPH_A, 0); /* CFRNW -> DIR */
-- select_peripheral(PE(24), PERIPH_A, 0); /* NWAIT <- IORDY */
-- common_pins_initialized = true;
-- }
--
-- at32_select_periph(extint_pin, GPIO_PERIPH_A, AT32_GPIOF_DEGLITCH);
--
-- pdev->resource[1].start = EIM_IRQ_BASE + extint;
-- pdev->resource[1].end = pdev->resource[1].start;
--
-- return 0;
--}
--
--struct platform_device *__init
--at32_add_device_ide(unsigned int id, unsigned int extint,
-- struct ide_platform_data *data)
--{
-- struct platform_device *pdev;
--
-- pdev = platform_device_alloc("at32_ide", id);
-- if (!pdev)
-- goto fail;
--
-- if (platform_device_add_data(pdev, data,
-- sizeof(struct ide_platform_data)))
-- goto fail;
--
-- if (at32_init_ide_or_cf(pdev, data->cs, extint))
-- goto fail;
--
-- platform_device_add(pdev);
-- return pdev;
--
--fail:
-- platform_device_put(pdev);
-- return NULL;
--}
--
--struct platform_device *__init
--at32_add_device_cf(unsigned int id, unsigned int extint,
-- struct cf_platform_data *data)
--{
-- struct platform_device *pdev;
--
-- pdev = platform_device_alloc("at32_cf", id);
-- if (!pdev)
-- goto fail;
--
-- if (platform_device_add_data(pdev, data,
-- sizeof(struct cf_platform_data)))
-- goto fail;
--
-- if (at32_init_ide_or_cf(pdev, data->cs, extint))
-- goto fail;
--
-- if (data->detect_pin != GPIO_PIN_NONE)
-- at32_select_gpio(data->detect_pin, AT32_GPIOF_DEGLITCH);
-- if (data->reset_pin != GPIO_PIN_NONE)
-- at32_select_gpio(data->reset_pin, 0);
-- if (data->vcc_pin != GPIO_PIN_NONE)
-- at32_select_gpio(data->vcc_pin, 0);
-- /* READY is used as extint, so we can't select it as gpio */
--
-- platform_device_add(pdev);
-- return pdev;
--
--fail:
-- platform_device_put(pdev);
-- return NULL;
--}
--
--/* --------------------------------------------------------------------
-- * AC97C
-- * -------------------------------------------------------------------- */
--static struct resource atmel_ac97c0_resource[] __initdata = {
-- PBMEM(0xfff02800),
-- IRQ(29),
--};
--static struct clk atmel_ac97c0_pclk = {
-- .name = "pclk",
-- .parent = &pbb_clk,
-- .mode = pbb_clk_mode,
-- .get_rate = pbb_clk_get_rate,
-- .index = 10,
--};
--
--struct platform_device *__init at32_add_device_ac97c(unsigned int id)
--{
-- struct platform_device *pdev;
--
-- if (id != 0)
-- return NULL;
--
-- pdev = platform_device_alloc("atmel_ac97c", id);
-- if (!pdev)
-- return NULL;
--
-- if (platform_device_add_resources(pdev, atmel_ac97c0_resource,
-- ARRAY_SIZE(atmel_ac97c0_resource)))
-- goto err_add_resources;
--
-- select_peripheral(PB(20), PERIPH_B, 0); /* SYNC */
-- select_peripheral(PB(21), PERIPH_B, 0); /* SDO */
-- select_peripheral(PB(22), PERIPH_B, 0); /* SDI */
-- select_peripheral(PB(23), PERIPH_B, 0); /* SCLK */
--
-- atmel_ac97c0_pclk.dev = &pdev->dev;
--
-- platform_device_add(pdev);
-- return pdev;
--
--err_add_resources:
-- platform_device_put(pdev);
-- return NULL;
--}
--
--/* --------------------------------------------------------------------
-- * ABDAC
-- * -------------------------------------------------------------------- */
--static struct resource abdac0_resource[] __initdata = {
-- PBMEM(0xfff02000),
-- IRQ(27),
--};
--static struct clk abdac0_pclk = {
-- .name = "pclk",
-- .parent = &pbb_clk,
-- .mode = pbb_clk_mode,
-- .get_rate = pbb_clk_get_rate,
-- .index = 8,
--};
--static struct clk abdac0_sample_clk = {
-- .name = "sample_clk",
-- .mode = genclk_mode,
-- .get_rate = genclk_get_rate,
-- .set_rate = genclk_set_rate,
-- .set_parent = genclk_set_parent,
-- .index = 6,
--};
--
--struct platform_device *__init at32_add_device_abdac(unsigned int id)
--{
-- struct platform_device *pdev;
--
-- if (id != 0)
-- return NULL;
--
-- pdev = platform_device_alloc("abdac", id);
-- if (!pdev)
-- return NULL;
--
-- if (platform_device_add_resources(pdev, abdac0_resource,
-- ARRAY_SIZE(abdac0_resource)))
-- goto err_add_resources;
--
-- select_peripheral(PB(20), PERIPH_A, 0); /* DATA1 */
-- select_peripheral(PB(21), PERIPH_A, 0); /* DATA0 */
-- select_peripheral(PB(22), PERIPH_A, 0); /* DATAN1 */
-- select_peripheral(PB(23), PERIPH_A, 0); /* DATAN0 */
--
-- abdac0_pclk.dev = &pdev->dev;
-- abdac0_sample_clk.dev = &pdev->dev;
--
-- platform_device_add(pdev);
-- return pdev;
--
--err_add_resources:
-- platform_device_put(pdev);
-- return NULL;
--}
--
--/* --------------------------------------------------------------------
-- * GCLK
-- * -------------------------------------------------------------------- */
--static struct clk gclk0 = {
-- .name = "gclk0",
-- .mode = genclk_mode,
-- .get_rate = genclk_get_rate,
-- .set_rate = genclk_set_rate,
-- .set_parent = genclk_set_parent,
-- .index = 0,
--};
--static struct clk gclk1 = {
-- .name = "gclk1",
-- .mode = genclk_mode,
-- .get_rate = genclk_get_rate,
-- .set_rate = genclk_set_rate,
-- .set_parent = genclk_set_parent,
-- .index = 1,
--};
--static struct clk gclk2 = {
-- .name = "gclk2",
-- .mode = genclk_mode,
-- .get_rate = genclk_get_rate,
-- .set_rate = genclk_set_rate,
-- .set_parent = genclk_set_parent,
-- .index = 2,
--};
--static struct clk gclk3 = {
-- .name = "gclk3",
-- .mode = genclk_mode,
-- .get_rate = genclk_get_rate,
-- .set_rate = genclk_set_rate,
-- .set_parent = genclk_set_parent,
-- .index = 3,
--};
--static struct clk gclk4 = {
-- .name = "gclk4",
-- .mode = genclk_mode,
-- .get_rate = genclk_get_rate,
-- .set_rate = genclk_set_rate,
-- .set_parent = genclk_set_parent,
-- .index = 4,
--};
--
--struct clk *at32_clock_list[] = {
-- &osc32k,
-- &osc0,
-- &osc1,
-- &pll0,
-- &pll1,
-- &cpu_clk,
-- &hsb_clk,
-- &pba_clk,
-- &pbb_clk,
-- &at32_pm_pclk,
-- &at32_intc0_pclk,
-- &hmatrix_clk,
-- &ebi_clk,
-- &hramc_clk,
-- &smc0_pclk,
-- &smc0_mck,
-- &pdc_hclk,
-- &pdc_pclk,
-- &dmaca0_hclk,
-- &pico_clk,
-- &pio0_mck,
-- &pio1_mck,
-- &pio2_mck,
-- &pio3_mck,
-- &pio4_mck,
-- &at32_systc0_pclk,
-- &atmel_usart0_usart,
-- &atmel_usart1_usart,
-- &atmel_usart2_usart,
-- &atmel_usart3_usart,
-- &macb0_hclk,
-- &macb0_pclk,
-- &macb1_hclk,
-- &macb1_pclk,
-- &atmel_spi0_spi_clk,
-- &atmel_spi1_spi_clk,
-- &atmel_twi0_pclk,
-- &atmel_mci0_pclk,
-- &atmel_lcdfb0_hck1,
-- &atmel_lcdfb0_pixclk,
-- &ssc0_pclk,
-- &ssc1_pclk,
-- &ssc2_pclk,
-- &usba0_hclk,
-- &usba0_pclk,
-- &atmel_ac97c0_pclk,
-- &abdac0_pclk,
-- &abdac0_sample_clk,
-- &gclk0,
-- &gclk1,
-- &gclk2,
-- &gclk3,
-- &gclk4,
--};
--unsigned int at32_nr_clocks = ARRAY_SIZE(at32_clock_list);
--
--void __init at32_portmux_init(void)
--{
-- at32_init_pio(&pio0_device);
-- at32_init_pio(&pio1_device);
-- at32_init_pio(&pio2_device);
-- at32_init_pio(&pio3_device);
-- at32_init_pio(&pio4_device);
--}
--
--void __init at32_clock_init(void)
--{
-- u32 cpu_mask = 0, hsb_mask = 0, pba_mask = 0, pbb_mask = 0;
-- int i;
--
-- if (pm_readl(MCCTRL) & PM_BIT(PLLSEL)) {
-- main_clock = &pll0;
-- cpu_clk.parent = &pll0;
-- } else {
-- main_clock = &osc0;
-- cpu_clk.parent = &osc0;
-- }
--
-- if (pm_readl(PLL0) & PM_BIT(PLLOSC))
-- pll0.parent = &osc1;
-- if (pm_readl(PLL1) & PM_BIT(PLLOSC))
-- pll1.parent = &osc1;
--
-- genclk_init_parent(&gclk0);
-- genclk_init_parent(&gclk1);
-- genclk_init_parent(&gclk2);
-- genclk_init_parent(&gclk3);
-- genclk_init_parent(&gclk4);
-- genclk_init_parent(&atmel_lcdfb0_pixclk);
-- genclk_init_parent(&abdac0_sample_clk);
--
-- /*
-- * Turn on all clocks that have at least one user already, and
-- * turn off everything else. We only do this for module
-- * clocks, and even though it isn't particularly pretty to
-- * check the address of the mode function, it should do the
-- * trick...
-- */
-- for (i = 0; i < ARRAY_SIZE(at32_clock_list); i++) {
-- struct clk *clk = at32_clock_list[i];
--
-- if (clk->users == 0)
-- continue;
--
-- if (clk->mode == &cpu_clk_mode)
-- cpu_mask |= 1 << clk->index;
-- else if (clk->mode == &hsb_clk_mode)
-- hsb_mask |= 1 << clk->index;
-- else if (clk->mode == &pba_clk_mode)
-- pba_mask |= 1 << clk->index;
-- else if (clk->mode == &pbb_clk_mode)
-- pbb_mask |= 1 << clk->index;
-- }
--
-- pm_writel(CPU_MASK, cpu_mask);
-- pm_writel(HSB_MASK, hsb_mask);
-- pm_writel(PBA_MASK, pba_mask);
-- pm_writel(PBB_MASK, pbb_mask);
--}
-diff -Nrup linux-2.6.24/arch/avr32/mach-at32ap/at32ap700x.c linux-avr32/arch/avr32/mach-at32ap/at32ap700x.c
---- linux-2.6.24/arch/avr32/mach-at32ap/at32ap700x.c 1969-12-31 19:00:00.000000000 -0500
-+++ linux-avr32/arch/avr32/mach-at32ap/at32ap700x.c 2008-02-01 14:51:35.000000000 -0500
-@@ -0,0 +1,1809 @@
-+/*
-+ * Copyright (C) 2005-2006 Atmel Corporation
-+ *
-+ * This program is free software; you can redistribute it and/or modify
-+ * it under the terms of the GNU General Public License version 2 as
-+ * published by the Free Software Foundation.
-+ */
-+#include <linux/clk.h>
-+#include <linux/fb.h>
-+#include <linux/init.h>
-+#include <linux/platform_device.h>
-+#include <linux/dma-mapping.h>
-+#include <linux/spi/spi.h>
-+
-+#include <asm/io.h>
-+#include <asm/irq.h>
-+
-+#include <asm/arch/at32ap700x.h>
-+#include <asm/arch/board.h>
-+#include <asm/arch/portmux.h>
-+
-+#include <video/atmel_lcdc.h>
-+
-+#include "clock.h"
-+#include "hmatrix.h"
-+#include "pio.h"
-+#include "pm.h"
-+
-+
-+#define PBMEM(base) \
-+ { \
-+ .start = base, \
-+ .end = base + 0x3ff, \
-+ .flags = IORESOURCE_MEM, \
-+ }
-+#define IRQ(num) \
-+ { \
-+ .start = num, \
-+ .end = num, \
-+ .flags = IORESOURCE_IRQ, \
-+ }
-+#define NAMED_IRQ(num, _name) \
-+ { \
-+ .start = num, \
-+ .end = num, \
-+ .name = _name, \
-+ .flags = IORESOURCE_IRQ, \
-+ }
-+
-+/* REVISIT these assume *every* device supports DMA, but several
-+ * don't ... tc, smc, pio, rtc, watchdog, pwm, ps2, and more.
-+ */
-+#define DEFINE_DEV(_name, _id) \
-+static u64 _name##_id##_dma_mask = DMA_32BIT_MASK; \
-+static struct platform_device _name##_id##_device = { \
-+ .name = #_name, \
-+ .id = _id, \
-+ .dev = { \
-+ .dma_mask = &_name##_id##_dma_mask, \
-+ .coherent_dma_mask = DMA_32BIT_MASK, \
-+ }, \
-+ .resource = _name##_id##_resource, \
-+ .num_resources = ARRAY_SIZE(_name##_id##_resource), \
-+}
-+#define DEFINE_DEV_DATA(_name, _id) \
-+static u64 _name##_id##_dma_mask = DMA_32BIT_MASK; \
-+static struct platform_device _name##_id##_device = { \
-+ .name = #_name, \
-+ .id = _id, \
-+ .dev = { \
-+ .dma_mask = &_name##_id##_dma_mask, \
-+ .platform_data = &_name##_id##_data, \
-+ .coherent_dma_mask = DMA_32BIT_MASK, \
-+ }, \
-+ .resource = _name##_id##_resource, \
-+ .num_resources = ARRAY_SIZE(_name##_id##_resource), \
-+}
-+
-+#define select_peripheral(pin, periph, flags) \
-+ at32_select_periph(GPIO_PIN_##pin, GPIO_##periph, flags)
-+
-+#define DEV_CLK(_name, devname, bus, _index) \
-+static struct clk devname##_##_name = { \
-+ .name = #_name, \
-+ .dev = &devname##_device.dev, \
-+ .parent = &bus##_clk, \
-+ .mode = bus##_clk_mode, \
-+ .get_rate = bus##_clk_get_rate, \
-+ .index = _index, \
-+}
-+
-+static DEFINE_SPINLOCK(pm_lock);
-+
-+unsigned long at32ap7000_osc_rates[3] = {
-+ [0] = 32768,
-+ /* FIXME: these are ATSTK1002-specific */
-+ [1] = 20000000,
-+ [2] = 12000000,
-+};
-+
-+static unsigned long osc_get_rate(struct clk *clk)
-+{
-+ return at32ap7000_osc_rates[clk->index];
-+}
-+
-+static unsigned long pll_get_rate(struct clk *clk, unsigned long control)
-+{
-+ unsigned long div, mul, rate;
-+
-+ if (!(control & PM_BIT(PLLEN)))
-+ return 0;
-+
-+ div = PM_BFEXT(PLLDIV, control) + 1;
-+ mul = PM_BFEXT(PLLMUL, control) + 1;
-+
-+ rate = clk->parent->get_rate(clk->parent);
-+ rate = (rate + div / 2) / div;
-+ rate *= mul;
-+
-+ return rate;
-+}
-+
-+static unsigned long pll0_get_rate(struct clk *clk)
-+{
-+ u32 control;
-+
-+ control = pm_readl(PLL0);
-+
-+ return pll_get_rate(clk, control);
-+}
-+
-+static unsigned long pll1_get_rate(struct clk *clk)
-+{
-+ u32 control;
-+
-+ control = pm_readl(PLL1);
-+
-+ return pll_get_rate(clk, control);
-+}
-+
-+/*
-+ * The AT32AP7000 has five primary clock sources: One 32kHz
-+ * oscillator, two crystal oscillators and two PLLs.
-+ */
-+static struct clk osc32k = {
-+ .name = "osc32k",
-+ .get_rate = osc_get_rate,
-+ .users = 1,
-+ .index = 0,
-+};
-+static struct clk osc0 = {
-+ .name = "osc0",
-+ .get_rate = osc_get_rate,
-+ .users = 1,
-+ .index = 1,
-+};
-+static struct clk osc1 = {
-+ .name = "osc1",
-+ .get_rate = osc_get_rate,
-+ .index = 2,
-+};
-+static struct clk pll0 = {
-+ .name = "pll0",
-+ .get_rate = pll0_get_rate,
-+ .parent = &osc0,
-+};
-+static struct clk pll1 = {
-+ .name = "pll1",
-+ .get_rate = pll1_get_rate,
-+ .parent = &osc0,
-+};
-+
-+/*
-+ * The main clock can be either osc0 or pll0. The boot loader may
-+ * have chosen one for us, so we don't really know which one until we
-+ * have a look at the SM.
-+ */
-+static struct clk *main_clock;
-+
-+/*
-+ * Synchronous clocks are generated from the main clock. The clocks
-+ * must satisfy the constraint
-+ * fCPU >= fHSB >= fPB
-+ * i.e. each clock must not be faster than its parent.
-+ */
-+static unsigned long bus_clk_get_rate(struct clk *clk, unsigned int shift)
-+{
-+ return main_clock->get_rate(main_clock) >> shift;
-+};
-+
-+static void cpu_clk_mode(struct clk *clk, int enabled)
-+{
-+ unsigned long flags;
-+ u32 mask;
-+
-+ spin_lock_irqsave(&pm_lock, flags);
-+ mask = pm_readl(CPU_MASK);
-+ if (enabled)
-+ mask |= 1 << clk->index;
-+ else
-+ mask &= ~(1 << clk->index);
-+ pm_writel(CPU_MASK, mask);
-+ spin_unlock_irqrestore(&pm_lock, flags);
-+}
-+
-+static unsigned long cpu_clk_get_rate(struct clk *clk)
-+{
-+ unsigned long cksel, shift = 0;
-+
-+ cksel = pm_readl(CKSEL);
-+ if (cksel & PM_BIT(CPUDIV))
-+ shift = PM_BFEXT(CPUSEL, cksel) + 1;
-+
-+ return bus_clk_get_rate(clk, shift);
-+}
-+
-+static long cpu_clk_set_rate(struct clk *clk, unsigned long rate, int apply)
-+{
-+ u32 control;
-+ unsigned long parent_rate, child_div, actual_rate, div;
-+
-+ parent_rate = clk->parent->get_rate(clk->parent);
-+ control = pm_readl(CKSEL);
-+
-+ if (control & PM_BIT(HSBDIV))
-+ child_div = 1 << (PM_BFEXT(HSBSEL, control) + 1);
-+ else
-+ child_div = 1;
-+
-+ if (rate > 3 * (parent_rate / 4) || child_div == 1) {
-+ actual_rate = parent_rate;
-+ control &= ~PM_BIT(CPUDIV);
-+ } else {
-+ unsigned int cpusel;
-+ div = (parent_rate + rate / 2) / rate;
-+ if (div > child_div)
-+ div = child_div;
-+ cpusel = (div > 1) ? (fls(div) - 2) : 0;
-+ control = PM_BIT(CPUDIV) | PM_BFINS(CPUSEL, cpusel, control);
-+ actual_rate = parent_rate / (1 << (cpusel + 1));
-+ }
-+
-+ pr_debug("clk %s: new rate %lu (actual rate %lu)\n",
-+ clk->name, rate, actual_rate);
-+
-+ if (apply)
-+ pm_writel(CKSEL, control);
-+
-+ return actual_rate;
-+}
-+
-+static void hsb_clk_mode(struct clk *clk, int enabled)
-+{
-+ unsigned long flags;
-+ u32 mask;
-+
-+ spin_lock_irqsave(&pm_lock, flags);
-+ mask = pm_readl(HSB_MASK);
-+ if (enabled)
-+ mask |= 1 << clk->index;
-+ else
-+ mask &= ~(1 << clk->index);
-+ pm_writel(HSB_MASK, mask);
-+ spin_unlock_irqrestore(&pm_lock, flags);
-+}
-+
-+static unsigned long hsb_clk_get_rate(struct clk *clk)
-+{
-+ unsigned long cksel, shift = 0;
-+
-+ cksel = pm_readl(CKSEL);
-+ if (cksel & PM_BIT(HSBDIV))
-+ shift = PM_BFEXT(HSBSEL, cksel) + 1;
-+
-+ return bus_clk_get_rate(clk, shift);
-+}
-+
-+static void pba_clk_mode(struct clk *clk, int enabled)
-+{
-+ unsigned long flags;
-+ u32 mask;
-+
-+ spin_lock_irqsave(&pm_lock, flags);
-+ mask = pm_readl(PBA_MASK);
-+ if (enabled)
-+ mask |= 1 << clk->index;
-+ else
-+ mask &= ~(1 << clk->index);
-+ pm_writel(PBA_MASK, mask);
-+ spin_unlock_irqrestore(&pm_lock, flags);
-+}
-+
-+static unsigned long pba_clk_get_rate(struct clk *clk)
-+{
-+ unsigned long cksel, shift = 0;
-+
-+ cksel = pm_readl(CKSEL);
-+ if (cksel & PM_BIT(PBADIV))
-+ shift = PM_BFEXT(PBASEL, cksel) + 1;
-+
-+ return bus_clk_get_rate(clk, shift);
-+}
-+
-+static void pbb_clk_mode(struct clk *clk, int enabled)
-+{
-+ unsigned long flags;
-+ u32 mask;
-+
-+ spin_lock_irqsave(&pm_lock, flags);
-+ mask = pm_readl(PBB_MASK);
-+ if (enabled)
-+ mask |= 1 << clk->index;
-+ else
-+ mask &= ~(1 << clk->index);
-+ pm_writel(PBB_MASK, mask);
-+ spin_unlock_irqrestore(&pm_lock, flags);
-+}
-+
-+static unsigned long pbb_clk_get_rate(struct clk *clk)
-+{
-+ unsigned long cksel, shift = 0;
-+
-+ cksel = pm_readl(CKSEL);
-+ if (cksel & PM_BIT(PBBDIV))
-+ shift = PM_BFEXT(PBBSEL, cksel) + 1;
-+
-+ return bus_clk_get_rate(clk, shift);
-+}
-+
-+static struct clk cpu_clk = {
-+ .name = "cpu",
-+ .get_rate = cpu_clk_get_rate,
-+ .set_rate = cpu_clk_set_rate,
-+ .users = 1,
-+};
-+static struct clk hsb_clk = {
-+ .name = "hsb",
-+ .parent = &cpu_clk,
-+ .get_rate = hsb_clk_get_rate,
-+};
-+static struct clk pba_clk = {
-+ .name = "pba",
-+ .parent = &hsb_clk,
-+ .mode = hsb_clk_mode,
-+ .get_rate = pba_clk_get_rate,
-+ .index = 1,
-+};
-+static struct clk pbb_clk = {
-+ .name = "pbb",
-+ .parent = &hsb_clk,
-+ .mode = hsb_clk_mode,
-+ .get_rate = pbb_clk_get_rate,
-+ .users = 1,
-+ .index = 2,
-+};
-+
-+/* --------------------------------------------------------------------
-+ * Generic Clock operations
-+ * -------------------------------------------------------------------- */
-+
-+static void genclk_mode(struct clk *clk, int enabled)
-+{
-+ u32 control;
-+
-+ control = pm_readl(GCCTRL(clk->index));
-+ if (enabled)
-+ control |= PM_BIT(CEN);
-+ else
-+ control &= ~PM_BIT(CEN);
-+ pm_writel(GCCTRL(clk->index), control);
-+}
-+
-+static unsigned long genclk_get_rate(struct clk *clk)
-+{
-+ u32 control;
-+ unsigned long div = 1;
-+
-+ control = pm_readl(GCCTRL(clk->index));
-+ if (control & PM_BIT(DIVEN))
-+ div = 2 * (PM_BFEXT(DIV, control) + 1);
-+
-+ return clk->parent->get_rate(clk->parent) / div;
-+}
-+
-+static long genclk_set_rate(struct clk *clk, unsigned long rate, int apply)
-+{
-+ u32 control;
-+ unsigned long parent_rate, actual_rate, div;
-+
-+ parent_rate = clk->parent->get_rate(clk->parent);
-+ control = pm_readl(GCCTRL(clk->index));
-+
-+ if (rate > 3 * parent_rate / 4) {
-+ actual_rate = parent_rate;
-+ control &= ~PM_BIT(DIVEN);
-+ } else {
-+ div = (parent_rate + rate) / (2 * rate) - 1;
-+ control = PM_BFINS(DIV, div, control) | PM_BIT(DIVEN);
-+ actual_rate = parent_rate / (2 * (div + 1));
-+ }
-+
-+ dev_dbg(clk->dev, "clk %s: new rate %lu (actual rate %lu)\n",
-+ clk->name, rate, actual_rate);
-+
-+ if (apply)
-+ pm_writel(GCCTRL(clk->index), control);
-+
-+ return actual_rate;
-+}
-+
-+int genclk_set_parent(struct clk *clk, struct clk *parent)
-+{
-+ u32 control;
-+
-+ dev_dbg(clk->dev, "clk %s: new parent %s (was %s)\n",
-+ clk->name, parent->name, clk->parent->name);
-+
-+ control = pm_readl(GCCTRL(clk->index));
-+
-+ if (parent == &osc1 || parent == &pll1)
-+ control |= PM_BIT(OSCSEL);
-+ else if (parent == &osc0 || parent == &pll0)
-+ control &= ~PM_BIT(OSCSEL);
-+ else
-+ return -EINVAL;
-+
-+ if (parent == &pll0 || parent == &pll1)
-+ control |= PM_BIT(PLLSEL);
-+ else
-+ control &= ~PM_BIT(PLLSEL);
-+
-+ pm_writel(GCCTRL(clk->index), control);
-+ clk->parent = parent;
-+
-+ return 0;
-+}
-+
-+static void __init genclk_init_parent(struct clk *clk)
-+{
-+ u32 control;
-+ struct clk *parent;
-+
-+ BUG_ON(clk->index > 7);
-+
-+ control = pm_readl(GCCTRL(clk->index));
-+ if (control & PM_BIT(OSCSEL))
-+ parent = (control & PM_BIT(PLLSEL)) ? &pll1 : &osc1;
-+ else
-+ parent = (control & PM_BIT(PLLSEL)) ? &pll0 : &osc0;
-+
-+ clk->parent = parent;
-+}
-+
-+/* --------------------------------------------------------------------
-+ * System peripherals
-+ * -------------------------------------------------------------------- */
-+static struct resource at32_pm0_resource[] = {
-+ {
-+ .start = 0xfff00000,
-+ .end = 0xfff0007f,
-+ .flags = IORESOURCE_MEM,
-+ },
-+ IRQ(20),
-+};
-+
-+static struct resource at32ap700x_rtc0_resource[] = {
-+ {
-+ .start = 0xfff00080,
-+ .end = 0xfff000af,
-+ .flags = IORESOURCE_MEM,
-+ },
-+ IRQ(21),
-+};
-+
-+static struct resource at32_wdt0_resource[] = {
-+ {
-+ .start = 0xfff000b0,
-+ .end = 0xfff000cf,
-+ .flags = IORESOURCE_MEM,
-+ },
-+};
-+
-+static struct resource at32_eic0_resource[] = {
-+ {
-+ .start = 0xfff00100,
-+ .end = 0xfff0013f,
-+ .flags = IORESOURCE_MEM,
-+ },
-+ IRQ(19),
-+};
-+
-+DEFINE_DEV(at32_pm, 0);
-+DEFINE_DEV(at32ap700x_rtc, 0);
-+DEFINE_DEV(at32_wdt, 0);
-+DEFINE_DEV(at32_eic, 0);
-+
-+/*
-+ * Peripheral clock for PM, RTC, WDT and EIC. PM will ensure that this
-+ * is always running.
-+ */
-+static struct clk at32_pm_pclk = {
-+ .name = "pclk",
-+ .dev = &at32_pm0_device.dev,
-+ .parent = &pbb_clk,
-+ .mode = pbb_clk_mode,
-+ .get_rate = pbb_clk_get_rate,
-+ .users = 1,
-+ .index = 0,
-+};
-+
-+static struct resource intc0_resource[] = {
-+ PBMEM(0xfff00400),
-+};
-+struct platform_device at32_intc0_device = {
-+ .name = "intc",
-+ .id = 0,
-+ .resource = intc0_resource,
-+ .num_resources = ARRAY_SIZE(intc0_resource),
-+};
-+DEV_CLK(pclk, at32_intc0, pbb, 1);
-+
-+static struct clk ebi_clk = {
-+ .name = "ebi",
-+ .parent = &hsb_clk,
-+ .mode = hsb_clk_mode,
-+ .get_rate = hsb_clk_get_rate,
-+ .users = 1,
-+};
-+static struct clk hramc_clk = {
-+ .name = "hramc",
-+ .parent = &hsb_clk,
-+ .mode = hsb_clk_mode,
-+ .get_rate = hsb_clk_get_rate,
-+ .users = 1,
-+ .index = 3,
-+};
-+
-+static struct resource smc0_resource[] = {
-+ PBMEM(0xfff03400),
-+};
-+DEFINE_DEV(smc, 0);
-+DEV_CLK(pclk, smc0, pbb, 13);
-+DEV_CLK(mck, smc0, hsb, 0);
-+
-+static struct platform_device pdc_device = {
-+ .name = "pdc",
-+ .id = 0,
-+};
-+DEV_CLK(hclk, pdc, hsb, 4);
-+DEV_CLK(pclk, pdc, pba, 16);
-+
-+static struct clk pico_clk = {
-+ .name = "pico",
-+ .parent = &cpu_clk,
-+ .mode = cpu_clk_mode,
-+ .get_rate = cpu_clk_get_rate,
-+ .users = 1,
-+};
-+
-+static struct resource dmaca0_resource[] = {
-+ {
-+ .start = 0xff200000,
-+ .end = 0xff20ffff,
-+ .flags = IORESOURCE_MEM,
-+ },
-+ IRQ(2),
-+};
-+DEFINE_DEV(dmaca, 0);
-+DEV_CLK(hclk, dmaca0, hsb, 10);
-+
-+/* --------------------------------------------------------------------
-+ * HMATRIX
-+ * -------------------------------------------------------------------- */
-+
-+static struct clk hmatrix_clk = {
-+ .name = "hmatrix_clk",
-+ .parent = &pbb_clk,
-+ .mode = pbb_clk_mode,
-+ .get_rate = pbb_clk_get_rate,
-+ .index = 2,
-+ .users = 1,
-+};
-+#define HMATRIX_BASE ((void __iomem *)0xfff00800)
-+
-+#define hmatrix_readl(reg) \
-+ __raw_readl((HMATRIX_BASE) + HMATRIX_##reg)
-+#define hmatrix_writel(reg,value) \
-+ __raw_writel((value), (HMATRIX_BASE) + HMATRIX_##reg)
-+
-+/*
-+ * Set bits in the HMATRIX Special Function Register (SFR) used by the
-+ * External Bus Interface (EBI). This can be used to enable special
-+ * features like CompactFlash support, NAND Flash support, etc. on
-+ * certain chipselects.
-+ */
-+static inline void set_ebi_sfr_bits(u32 mask)
-+{
-+ u32 sfr;
-+
-+ clk_enable(&hmatrix_clk);
-+ sfr = hmatrix_readl(SFR4);
-+ sfr |= mask;
-+ hmatrix_writel(SFR4, sfr);
-+ clk_disable(&hmatrix_clk);
-+}
-+
-+/* --------------------------------------------------------------------
-+ * System Timer/Counter (TC)
-+ * -------------------------------------------------------------------- */
-+static struct resource at32_systc0_resource[] = {
-+ PBMEM(0xfff00c00),
-+ IRQ(22),
-+};
-+struct platform_device at32_systc0_device = {
-+ .name = "systc",
-+ .id = 0,
-+ .resource = at32_systc0_resource,
-+ .num_resources = ARRAY_SIZE(at32_systc0_resource),
-+};
-+DEV_CLK(pclk, at32_systc0, pbb, 3);
-+
-+/* --------------------------------------------------------------------
-+ * PIO
-+ * -------------------------------------------------------------------- */
-+
-+static struct resource pio0_resource[] = {
-+ PBMEM(0xffe02800),
-+ IRQ(13),
-+};
-+DEFINE_DEV(pio, 0);
-+DEV_CLK(mck, pio0, pba, 10);
-+
-+static struct resource pio1_resource[] = {
-+ PBMEM(0xffe02c00),
-+ IRQ(14),
-+};
-+DEFINE_DEV(pio, 1);
-+DEV_CLK(mck, pio1, pba, 11);
-+
-+static struct resource pio2_resource[] = {
-+ PBMEM(0xffe03000),
-+ IRQ(15),
-+};
-+DEFINE_DEV(pio, 2);
-+DEV_CLK(mck, pio2, pba, 12);
-+
-+static struct resource pio3_resource[] = {
-+ PBMEM(0xffe03400),
-+ IRQ(16),
-+};
-+DEFINE_DEV(pio, 3);
-+DEV_CLK(mck, pio3, pba, 13);
-+
-+static struct resource pio4_resource[] = {
-+ PBMEM(0xffe03800),
-+ IRQ(17),
-+};
-+DEFINE_DEV(pio, 4);
-+DEV_CLK(mck, pio4, pba, 14);
-+
-+void __init at32_add_system_devices(void)
-+{
-+ platform_device_register(&at32_pm0_device);
-+ platform_device_register(&at32_intc0_device);
-+ platform_device_register(&at32ap700x_rtc0_device);
-+ platform_device_register(&at32_wdt0_device);
-+ platform_device_register(&at32_eic0_device);
-+ platform_device_register(&smc0_device);
-+ platform_device_register(&pdc_device);
-+ platform_device_register(&dmaca0_device);
-+
-+ platform_device_register(&at32_systc0_device);
-+
-+ platform_device_register(&pio0_device);
-+ platform_device_register(&pio1_device);
-+ platform_device_register(&pio2_device);
-+ platform_device_register(&pio3_device);
-+ platform_device_register(&pio4_device);
-+}
-+
-+/* --------------------------------------------------------------------
-+ * USART
-+ * -------------------------------------------------------------------- */
-+
-+static struct atmel_uart_data atmel_usart0_data = {
-+ .use_dma_tx = 1,
-+ .use_dma_rx = 1,
-+};
-+static struct resource atmel_usart0_resource[] = {
-+ PBMEM(0xffe00c00),
-+ IRQ(6),
-+};
-+DEFINE_DEV_DATA(atmel_usart, 0);
-+DEV_CLK(usart, atmel_usart0, pba, 3);
-+
-+static struct atmel_uart_data atmel_usart1_data = {
-+ .use_dma_tx = 1,
-+ .use_dma_rx = 1,
-+};
-+static struct resource atmel_usart1_resource[] = {
-+ PBMEM(0xffe01000),
-+ IRQ(7),
-+};
-+DEFINE_DEV_DATA(atmel_usart, 1);
-+DEV_CLK(usart, atmel_usart1, pba, 4);
-+
-+static struct atmel_uart_data atmel_usart2_data = {
-+ .use_dma_tx = 1,
-+ .use_dma_rx = 1,
-+};
-+static struct resource atmel_usart2_resource[] = {
-+ PBMEM(0xffe01400),
-+ IRQ(8),
-+};
-+DEFINE_DEV_DATA(atmel_usart, 2);
-+DEV_CLK(usart, atmel_usart2, pba, 5);
-+
-+static struct atmel_uart_data atmel_usart3_data = {
-+ .use_dma_tx = 1,
-+ .use_dma_rx = 1,
-+};
-+static struct resource atmel_usart3_resource[] = {
-+ PBMEM(0xffe01800),
-+ IRQ(9),
-+};
-+DEFINE_DEV_DATA(atmel_usart, 3);
-+DEV_CLK(usart, atmel_usart3, pba, 6);
-+
-+static inline void configure_usart0_pins(void)
-+{
-+ select_peripheral(PA(8), PERIPH_B, 0); /* RXD */
-+ select_peripheral(PA(9), PERIPH_B, 0); /* TXD */
-+}
-+
-+static inline void configure_usart1_pins(void)
-+{
-+ select_peripheral(PA(17), PERIPH_A, 0); /* RXD */
-+ select_peripheral(PA(18), PERIPH_A, 0); /* TXD */
-+}
-+
-+static inline void configure_usart2_pins(void)
-+{
-+ select_peripheral(PB(26), PERIPH_B, 0); /* RXD */
-+ select_peripheral(PB(27), PERIPH_B, 0); /* TXD */
-+}
-+
-+static inline void configure_usart3_pins(void)
-+{
-+ select_peripheral(PB(18), PERIPH_B, 0); /* RXD */
-+ select_peripheral(PB(17), PERIPH_B, 0); /* TXD */
-+}
-+
-+static struct platform_device *__initdata at32_usarts[4];
-+
-+void __init at32_map_usart(unsigned int hw_id, unsigned int line)
-+{
-+ struct platform_device *pdev;
-+
-+ switch (hw_id) {
-+ case 0:
-+ pdev = &atmel_usart0_device;
-+ configure_usart0_pins();
-+ break;
-+ case 1:
-+ pdev = &atmel_usart1_device;
-+ configure_usart1_pins();
-+ break;
-+ case 2:
-+ pdev = &atmel_usart2_device;
-+ configure_usart2_pins();
-+ break;
-+ case 3:
-+ pdev = &atmel_usart3_device;
-+ configure_usart3_pins();
-+ break;
-+ default:
-+ return;
-+ }
-+
-+ if (PXSEG(pdev->resource[0].start) == P4SEG) {
-+ /* Addresses in the P4 segment are permanently mapped 1:1 */
-+ struct atmel_uart_data *data = pdev->dev.platform_data;
-+ data->regs = (void __iomem *)pdev->resource[0].start;
-+ }
-+
-+ pdev->id = line;
-+ at32_usarts[line] = pdev;
-+}
-+
-+struct platform_device *__init at32_add_device_usart(unsigned int id)
-+{
-+ platform_device_register(at32_usarts[id]);
-+ return at32_usarts[id];
-+}
-+
-+struct platform_device *atmel_default_console_device;
-+
-+void __init at32_setup_serial_console(unsigned int usart_id)
-+{
-+ atmel_default_console_device = at32_usarts[usart_id];
-+}
-+
-+/* --------------------------------------------------------------------
-+ * Ethernet
-+ * -------------------------------------------------------------------- */
-+
-+#ifdef CONFIG_CPU_AT32AP7000
-+static struct eth_platform_data macb0_data;
-+static struct resource macb0_resource[] = {
-+ PBMEM(0xfff01800),
-+ IRQ(25),
-+};
-+DEFINE_DEV_DATA(macb, 0);
-+DEV_CLK(hclk, macb0, hsb, 8);
-+DEV_CLK(pclk, macb0, pbb, 6);
-+
-+static struct eth_platform_data macb1_data;
-+static struct resource macb1_resource[] = {
-+ PBMEM(0xfff01c00),
-+ IRQ(26),
-+};
-+DEFINE_DEV_DATA(macb, 1);
-+DEV_CLK(hclk, macb1, hsb, 9);
-+DEV_CLK(pclk, macb1, pbb, 7);
-+
-+struct platform_device *__init
-+at32_add_device_eth(unsigned int id, struct eth_platform_data *data)
-+{
-+ struct platform_device *pdev;
-+
-+ switch (id) {
-+ case 0:
-+ pdev = &macb0_device;
-+
-+ select_peripheral(PC(3), PERIPH_A, 0); /* TXD0 */
-+ select_peripheral(PC(4), PERIPH_A, 0); /* TXD1 */
-+ select_peripheral(PC(7), PERIPH_A, 0); /* TXEN */
-+ select_peripheral(PC(8), PERIPH_A, 0); /* TXCK */
-+ select_peripheral(PC(9), PERIPH_A, 0); /* RXD0 */
-+ select_peripheral(PC(10), PERIPH_A, 0); /* RXD1 */
-+ select_peripheral(PC(13), PERIPH_A, 0); /* RXER */
-+ select_peripheral(PC(15), PERIPH_A, 0); /* RXDV */
-+ select_peripheral(PC(16), PERIPH_A, 0); /* MDC */
-+ select_peripheral(PC(17), PERIPH_A, 0); /* MDIO */
-+
-+ if (!data->is_rmii) {
-+ select_peripheral(PC(0), PERIPH_A, 0); /* COL */
-+ select_peripheral(PC(1), PERIPH_A, 0); /* CRS */
-+ select_peripheral(PC(2), PERIPH_A, 0); /* TXER */
-+ select_peripheral(PC(5), PERIPH_A, 0); /* TXD2 */
-+ select_peripheral(PC(6), PERIPH_A, 0); /* TXD3 */
-+ select_peripheral(PC(11), PERIPH_A, 0); /* RXD2 */
-+ select_peripheral(PC(12), PERIPH_A, 0); /* RXD3 */
-+ select_peripheral(PC(14), PERIPH_A, 0); /* RXCK */
-+ select_peripheral(PC(18), PERIPH_A, 0); /* SPD */
-+ }
-+ break;
-+
-+ case 1:
-+ pdev = &macb1_device;
-+
-+ select_peripheral(PD(13), PERIPH_B, 0); /* TXD0 */
-+ select_peripheral(PD(14), PERIPH_B, 0); /* TXD1 */
-+ select_peripheral(PD(11), PERIPH_B, 0); /* TXEN */
-+ select_peripheral(PD(12), PERIPH_B, 0); /* TXCK */
-+ select_peripheral(PD(10), PERIPH_B, 0); /* RXD0 */
-+ select_peripheral(PD(6), PERIPH_B, 0); /* RXD1 */
-+ select_peripheral(PD(5), PERIPH_B, 0); /* RXER */
-+ select_peripheral(PD(4), PERIPH_B, 0); /* RXDV */
-+ select_peripheral(PD(3), PERIPH_B, 0); /* MDC */
-+ select_peripheral(PD(2), PERIPH_B, 0); /* MDIO */
-+
-+ if (!data->is_rmii) {
-+ select_peripheral(PC(19), PERIPH_B, 0); /* COL */
-+ select_peripheral(PC(23), PERIPH_B, 0); /* CRS */
-+ select_peripheral(PC(26), PERIPH_B, 0); /* TXER */
-+ select_peripheral(PC(27), PERIPH_B, 0); /* TXD2 */
-+ select_peripheral(PC(28), PERIPH_B, 0); /* TXD3 */
-+ select_peripheral(PC(29), PERIPH_B, 0); /* RXD2 */
-+ select_peripheral(PC(30), PERIPH_B, 0); /* RXD3 */
-+ select_peripheral(PC(24), PERIPH_B, 0); /* RXCK */
-+ select_peripheral(PD(15), PERIPH_B, 0); /* SPD */
-+ }
-+ break;
-+
-+ default:
-+ return NULL;
-+ }
-+
-+ memcpy(pdev->dev.platform_data, data, sizeof(struct eth_platform_data));
-+ platform_device_register(pdev);
-+
-+ return pdev;
-+}
-+#endif
-+
-+/* --------------------------------------------------------------------
-+ * SPI
-+ * -------------------------------------------------------------------- */
-+static struct resource atmel_spi0_resource[] = {
-+ PBMEM(0xffe00000),
-+ IRQ(3),
-+};
-+DEFINE_DEV(atmel_spi, 0);
-+DEV_CLK(spi_clk, atmel_spi0, pba, 0);
-+
-+static struct resource atmel_spi1_resource[] = {
-+ PBMEM(0xffe00400),
-+ IRQ(4),
-+};
-+DEFINE_DEV(atmel_spi, 1);
-+DEV_CLK(spi_clk, atmel_spi1, pba, 1);
-+
-+static void __init
-+at32_spi_setup_slaves(unsigned int bus_num, struct spi_board_info *b,
-+ unsigned int n, const u8 *pins)
-+{
-+ unsigned int pin, mode;
-+
-+ for (; n; n--, b++) {
-+ b->bus_num = bus_num;
-+ if (b->chip_select >= 4)
-+ continue;
-+ pin = (unsigned)b->controller_data;
-+ if (!pin) {
-+ pin = pins[b->chip_select];
-+ b->controller_data = (void *)pin;
-+ }
-+ mode = AT32_GPIOF_OUTPUT;
-+ if (!(b->mode & SPI_CS_HIGH))
-+ mode |= AT32_GPIOF_HIGH;
-+ at32_select_gpio(pin, mode);
-+ }
-+}
-+
-+struct platform_device *__init
-+at32_add_device_spi(unsigned int id, struct spi_board_info *b, unsigned int n)
-+{
-+ /*
-+ * Manage the chipselects as GPIOs, normally using the same pins
-+ * the SPI controller expects; but boards can use other pins.
-+ */
-+ static u8 __initdata spi0_pins[] =
-+ { GPIO_PIN_PA(3), GPIO_PIN_PA(4),
-+ GPIO_PIN_PA(5), GPIO_PIN_PA(20), };
-+ static u8 __initdata spi1_pins[] =
-+ { GPIO_PIN_PB(2), GPIO_PIN_PB(3),
-+ GPIO_PIN_PB(4), GPIO_PIN_PA(27), };
-+ struct platform_device *pdev;
-+
-+ switch (id) {
-+ case 0:
-+ pdev = &atmel_spi0_device;
-+ select_peripheral(PA(0), PERIPH_A, 0); /* MISO */
-+ select_peripheral(PA(1), PERIPH_A, 0); /* MOSI */
-+ select_peripheral(PA(2), PERIPH_A, 0); /* SCK */
-+ at32_spi_setup_slaves(0, b, n, spi0_pins);
-+ break;
-+
-+ case 1:
-+ pdev = &atmel_spi1_device;
-+ select_peripheral(PB(0), PERIPH_B, 0); /* MISO */
-+ select_peripheral(PB(1), PERIPH_B, 0); /* MOSI */
-+ select_peripheral(PB(5), PERIPH_B, 0); /* SCK */
-+ at32_spi_setup_slaves(1, b, n, spi1_pins);
-+ break;
-+
-+ default:
-+ return NULL;
-+ }
-+
-+ spi_register_board_info(b, n);
-+ platform_device_register(pdev);
-+ return pdev;
-+}
-+
-+/* --------------------------------------------------------------------
-+ * TWI
-+ * -------------------------------------------------------------------- */
-+static struct resource atmel_twi0_resource[] __initdata = {
-+ PBMEM(0xffe00800),
-+ IRQ(5),
-+};
-+static struct clk atmel_twi0_pclk = {
-+ .name = "twi_pclk",
-+ .parent = &pba_clk,
-+ .mode = pba_clk_mode,
-+ .get_rate = pba_clk_get_rate,
-+ .index = 2,
-+};
-+
-+struct platform_device *__init at32_add_device_twi(unsigned int id)
-+{
-+ struct platform_device *pdev;
-+
-+ if (id != 0)
-+ return NULL;
-+
-+ pdev = platform_device_alloc("atmel_twi", id);
-+ if (!pdev)
-+ return NULL;
-+
-+ if (platform_device_add_resources(pdev, atmel_twi0_resource,
-+ ARRAY_SIZE(atmel_twi0_resource)))
-+ goto err_add_resources;
-+
-+ select_peripheral(PA(6), PERIPH_A, 0); /* SDA */
-+ select_peripheral(PA(7), PERIPH_A, 0); /* SDL */
-+
-+ atmel_twi0_pclk.dev = &pdev->dev;
-+
-+ platform_device_add(pdev);
-+ return pdev;
-+
-+err_add_resources:
-+ platform_device_put(pdev);
-+ return NULL;
-+}
-+
-+/* --------------------------------------------------------------------
-+ * MMC
-+ * -------------------------------------------------------------------- */
-+static struct resource atmel_mci0_resource[] __initdata = {
-+ PBMEM(0xfff02400),
-+ IRQ(28),
-+};
-+static struct clk atmel_mci0_pclk = {
-+ .name = "mci_clk",
-+ .parent = &pbb_clk,
-+ .mode = pbb_clk_mode,
-+ .get_rate = pbb_clk_get_rate,
-+ .index = 9,
-+};
-+
-+struct platform_device *__init
-+at32_add_device_mci(unsigned int id, struct mci_platform_data *data)
-+{
-+ struct platform_device *pdev;
-+
-+ if (id != 0)
-+ return NULL;
-+
-+ pdev = platform_device_alloc("atmel_mci", id);
-+ if (!pdev)
-+ goto fail;
-+
-+ if (platform_device_add_resources(pdev, atmel_mci0_resource,
-+ ARRAY_SIZE(atmel_mci0_resource)))
-+ goto fail;
-+
-+ if (data && platform_device_add_data(pdev, data,
-+ sizeof(struct mci_platform_data)))
-+ goto fail;
-+
-+ select_peripheral(PA(10), PERIPH_A, 0); /* CLK */
-+ select_peripheral(PA(11), PERIPH_A, 0); /* CMD */
-+ select_peripheral(PA(12), PERIPH_A, 0); /* DATA0 */
-+ select_peripheral(PA(13), PERIPH_A, 0); /* DATA1 */
-+ select_peripheral(PA(14), PERIPH_A, 0); /* DATA2 */
-+ select_peripheral(PA(15), PERIPH_A, 0); /* DATA3 */
-+
-+ if (data) {
-+ if (data->detect_pin != GPIO_PIN_NONE)
-+ at32_select_gpio(data->detect_pin, 0);
-+ if (data->wp_pin != GPIO_PIN_NONE)
-+ at32_select_gpio(data->wp_pin, 0);
-+ }
-+
-+ atmel_mci0_pclk.dev = &pdev->dev;
-+
-+ platform_device_add(pdev);
-+ return pdev;
-+
-+fail:
-+ platform_device_put(pdev);
-+ return NULL;
-+}
-+
-+/* --------------------------------------------------------------------
-+ * LCDC
-+ * -------------------------------------------------------------------- */
-+#if defined(CONFIG_CPU_AT32AP7000) || defined(CONFIG_CPU_AT32AP7002)
-+static struct atmel_lcdfb_info atmel_lcdfb0_data;
-+static struct resource atmel_lcdfb0_resource[] = {
-+ {
-+ .start = 0xff000000,
-+ .end = 0xff000fff,
-+ .flags = IORESOURCE_MEM,
-+ },
-+ IRQ(1),
-+ {
-+ /* Placeholder for pre-allocated fb memory */
-+ .start = 0x00000000,
-+ .end = 0x00000000,
-+ .flags = 0,
-+ },
-+};
-+DEFINE_DEV_DATA(atmel_lcdfb, 0);
-+DEV_CLK(hck1, atmel_lcdfb0, hsb, 7);
-+static struct clk atmel_lcdfb0_pixclk = {
-+ .name = "lcdc_clk",
-+ .dev = &atmel_lcdfb0_device.dev,
-+ .mode = genclk_mode,
-+ .get_rate = genclk_get_rate,
-+ .set_rate = genclk_set_rate,
-+ .set_parent = genclk_set_parent,
-+ .index = 7,
-+};
-+
-+struct platform_device *__init
-+at32_add_device_lcdc(unsigned int id, struct atmel_lcdfb_info *data,
-+ unsigned long fbmem_start, unsigned long fbmem_len)
-+{
-+ struct platform_device *pdev;
-+ struct atmel_lcdfb_info *info;
-+ struct fb_monspecs *monspecs;
-+ struct fb_videomode *modedb;
-+ unsigned int modedb_size;
-+
-+ /*
-+ * Do a deep copy of the fb data, monspecs and modedb. Make
-+ * sure all allocations are done before setting up the
-+ * portmux.
-+ */
-+ monspecs = kmemdup(data->default_monspecs,
-+ sizeof(struct fb_monspecs), GFP_KERNEL);
-+ if (!monspecs)
-+ return NULL;
-+
-+ modedb_size = sizeof(struct fb_videomode) * monspecs->modedb_len;
-+ modedb = kmemdup(monspecs->modedb, modedb_size, GFP_KERNEL);
-+ if (!modedb)
-+ goto err_dup_modedb;
-+ monspecs->modedb = modedb;
-+
-+ switch (id) {
-+ case 0:
-+ pdev = &atmel_lcdfb0_device;
-+ select_peripheral(PC(19), PERIPH_A, 0); /* CC */
-+ select_peripheral(PC(20), PERIPH_A, 0); /* HSYNC */
-+ select_peripheral(PC(21), PERIPH_A, 0); /* PCLK */
-+ select_peripheral(PC(22), PERIPH_A, 0); /* VSYNC */
-+ select_peripheral(PC(23), PERIPH_A, 0); /* DVAL */
-+ select_peripheral(PC(24), PERIPH_A, 0); /* MODE */
-+ select_peripheral(PC(25), PERIPH_A, 0); /* PWR */
-+ select_peripheral(PC(26), PERIPH_A, 0); /* DATA0 */
-+ select_peripheral(PC(27), PERIPH_A, 0); /* DATA1 */
-+ select_peripheral(PC(28), PERIPH_A, 0); /* DATA2 */
-+ select_peripheral(PC(29), PERIPH_A, 0); /* DATA3 */
-+ select_peripheral(PC(30), PERIPH_A, 0); /* DATA4 */
-+ select_peripheral(PC(31), PERIPH_A, 0); /* DATA5 */
-+ select_peripheral(PD(0), PERIPH_A, 0); /* DATA6 */
-+ select_peripheral(PD(1), PERIPH_A, 0); /* DATA7 */
-+ select_peripheral(PD(2), PERIPH_A, 0); /* DATA8 */
-+ select_peripheral(PD(3), PERIPH_A, 0); /* DATA9 */
-+ select_peripheral(PD(4), PERIPH_A, 0); /* DATA10 */
-+ select_peripheral(PD(5), PERIPH_A, 0); /* DATA11 */
-+ select_peripheral(PD(6), PERIPH_A, 0); /* DATA12 */
-+ select_peripheral(PD(7), PERIPH_A, 0); /* DATA13 */
-+ select_peripheral(PD(8), PERIPH_A, 0); /* DATA14 */
-+ select_peripheral(PD(9), PERIPH_A, 0); /* DATA15 */
-+ select_peripheral(PD(10), PERIPH_A, 0); /* DATA16 */
-+ select_peripheral(PD(11), PERIPH_A, 0); /* DATA17 */
-+ select_peripheral(PD(12), PERIPH_A, 0); /* DATA18 */
-+ select_peripheral(PD(13), PERIPH_A, 0); /* DATA19 */
-+ select_peripheral(PD(14), PERIPH_A, 0); /* DATA20 */
-+ select_peripheral(PD(15), PERIPH_A, 0); /* DATA21 */
-+ select_peripheral(PD(16), PERIPH_A, 0); /* DATA22 */
-+ select_peripheral(PD(17), PERIPH_A, 0); /* DATA23 */
-+
-+ clk_set_parent(&atmel_lcdfb0_pixclk, &pll0);
-+ clk_set_rate(&atmel_lcdfb0_pixclk, clk_get_rate(&pll0));
-+ break;
-+
-+ default:
-+ goto err_invalid_id;
-+ }
-+
-+ if (fbmem_len) {
-+ pdev->resource[2].start = fbmem_start;
-+ pdev->resource[2].end = fbmem_start + fbmem_len - 1;
-+ pdev->resource[2].flags = IORESOURCE_MEM;
-+ }
-+
-+ info = pdev->dev.platform_data;
-+ memcpy(info, data, sizeof(struct atmel_lcdfb_info));
-+ info->default_monspecs = monspecs;
-+
-+ platform_device_register(pdev);
-+ return pdev;
-+
-+err_invalid_id:
-+ kfree(modedb);
-+err_dup_modedb:
-+ kfree(monspecs);
-+ return NULL;
-+}
-+#endif
-+
-+/* --------------------------------------------------------------------
-+ * PWM
-+ * -------------------------------------------------------------------- */
-+static struct resource atmel_pwm0_resource[] __initdata = {
-+ PBMEM(0xfff01400),
-+ IRQ(24),
-+};
-+static struct clk atmel_pwm0_mck = {
-+ .name = "mck",
-+ .parent = &pbb_clk,
-+ .mode = pbb_clk_mode,
-+ .get_rate = pbb_clk_get_rate,
-+ .index = 5,
-+};
-+
-+struct platform_device *__init at32_add_device_pwm(u32 mask)
-+{
-+ struct platform_device *pdev;
-+
-+ if (!mask)
-+ return NULL;
-+
-+ pdev = platform_device_alloc("atmel_pwm", 0);
-+ if (!pdev)
-+ return NULL;
-+
-+ if (platform_device_add_resources(pdev, atmel_pwm0_resource,
-+ ARRAY_SIZE(atmel_pwm0_resource)))
-+ goto out_free_pdev;
-+
-+ if (platform_device_add_data(pdev, &mask, sizeof(mask)))
-+ goto out_free_pdev;
-+
-+ if (mask & (1 << 0))
-+ select_peripheral(PA(28), PERIPH_A, 0);
-+ if (mask & (1 << 1))
-+ select_peripheral(PA(29), PERIPH_A, 0);
-+ if (mask & (1 << 2))
-+ select_peripheral(PA(21), PERIPH_B, 0);
-+ if (mask & (1 << 3))
-+ select_peripheral(PA(22), PERIPH_B, 0);
-+
-+ atmel_pwm0_mck.dev = &pdev->dev;
-+
-+ platform_device_add(pdev);
-+
-+ return pdev;
-+
-+out_free_pdev:
-+ platform_device_put(pdev);
-+ return NULL;
-+}
-+
-+/* --------------------------------------------------------------------
-+ * SSC
-+ * -------------------------------------------------------------------- */
-+static struct resource ssc0_resource[] = {
-+ PBMEM(0xffe01c00),
-+ IRQ(10),
-+};
-+DEFINE_DEV(ssc, 0);
-+DEV_CLK(pclk, ssc0, pba, 7);
-+
-+static struct resource ssc1_resource[] = {
-+ PBMEM(0xffe02000),
-+ IRQ(11),
-+};
-+DEFINE_DEV(ssc, 1);
-+DEV_CLK(pclk, ssc1, pba, 8);
-+
-+static struct resource ssc2_resource[] = {
-+ PBMEM(0xffe02400),
-+ IRQ(12),
-+};
-+DEFINE_DEV(ssc, 2);
-+DEV_CLK(pclk, ssc2, pba, 9);
-+
-+struct platform_device *__init
-+at32_add_device_ssc(unsigned int id, unsigned int flags)
-+{
-+ struct platform_device *pdev;
-+
-+ switch (id) {
-+ case 0:
-+ pdev = &ssc0_device;
-+ if (flags & ATMEL_SSC_RF)
-+ select_peripheral(PA(21), PERIPH_A, 0); /* RF */
-+ if (flags & ATMEL_SSC_RK)
-+ select_peripheral(PA(22), PERIPH_A, 0); /* RK */
-+ if (flags & ATMEL_SSC_TK)
-+ select_peripheral(PA(23), PERIPH_A, 0); /* TK */
-+ if (flags & ATMEL_SSC_TF)
-+ select_peripheral(PA(24), PERIPH_A, 0); /* TF */
-+ if (flags & ATMEL_SSC_TD)
-+ select_peripheral(PA(25), PERIPH_A, 0); /* TD */
-+ if (flags & ATMEL_SSC_RD)
-+ select_peripheral(PA(26), PERIPH_A, 0); /* RD */
-+ break;
-+ case 1:
-+ pdev = &ssc1_device;
-+ if (flags & ATMEL_SSC_RF)
-+ select_peripheral(PA(0), PERIPH_B, 0); /* RF */
-+ if (flags & ATMEL_SSC_RK)
-+ select_peripheral(PA(1), PERIPH_B, 0); /* RK */
-+ if (flags & ATMEL_SSC_TK)
-+ select_peripheral(PA(2), PERIPH_B, 0); /* TK */
-+ if (flags & ATMEL_SSC_TF)
-+ select_peripheral(PA(3), PERIPH_B, 0); /* TF */
-+ if (flags & ATMEL_SSC_TD)
-+ select_peripheral(PA(4), PERIPH_B, 0); /* TD */
-+ if (flags & ATMEL_SSC_RD)
-+ select_peripheral(PA(5), PERIPH_B, 0); /* RD */
-+ break;
-+ case 2:
-+ pdev = &ssc2_device;
-+ if (flags & ATMEL_SSC_TD)
-+ select_peripheral(PB(13), PERIPH_A, 0); /* TD */
-+ if (flags & ATMEL_SSC_RD)
-+ select_peripheral(PB(14), PERIPH_A, 0); /* RD */
-+ if (flags & ATMEL_SSC_TK)
-+ select_peripheral(PB(15), PERIPH_A, 0); /* TK */
-+ if (flags & ATMEL_SSC_TF)
-+ select_peripheral(PB(16), PERIPH_A, 0); /* TF */
-+ if (flags & ATMEL_SSC_RF)
-+ select_peripheral(PB(17), PERIPH_A, 0); /* RF */
-+ if (flags & ATMEL_SSC_RK)
-+ select_peripheral(PB(18), PERIPH_A, 0); /* RK */
-+ break;
-+ default:
-+ return NULL;
-+ }
-+
-+ platform_device_register(pdev);
-+ return pdev;
-+}
-+
-+/* --------------------------------------------------------------------
-+ * USB Device Controller
-+ * -------------------------------------------------------------------- */
-+static struct resource usba0_resource[] __initdata = {
-+ {
-+ .start = 0xff300000,
-+ .end = 0xff3fffff,
-+ .flags = IORESOURCE_MEM,
-+ }, {
-+ .start = 0xfff03000,
-+ .end = 0xfff033ff,
-+ .flags = IORESOURCE_MEM,
-+ },
-+ IRQ(31),
-+};
-+static struct clk usba0_pclk = {
-+ .name = "pclk",
-+ .parent = &pbb_clk,
-+ .mode = pbb_clk_mode,
-+ .get_rate = pbb_clk_get_rate,
-+ .index = 12,
-+};
-+static struct clk usba0_hclk = {
-+ .name = "hclk",
-+ .parent = &hsb_clk,
-+ .mode = hsb_clk_mode,
-+ .get_rate = hsb_clk_get_rate,
-+ .index = 6,
-+};
-+
-+struct platform_device *__init
-+at32_add_device_usba(unsigned int id, struct usba_platform_data *data)
-+{
-+ struct platform_device *pdev;
-+
-+ if (id != 0)
-+ return NULL;
-+
-+ pdev = platform_device_alloc("atmel_usba_udc", 0);
-+ if (!pdev)
-+ return NULL;
-+
-+ if (platform_device_add_resources(pdev, usba0_resource,
-+ ARRAY_SIZE(usba0_resource)))
-+ goto out_free_pdev;
-+
-+ if (data) {
-+ if (platform_device_add_data(pdev, data, sizeof(*data)))
-+ goto out_free_pdev;
-+
-+ if (data->vbus_pin != GPIO_PIN_NONE)
-+ at32_select_gpio(data->vbus_pin, 0);
-+ }
-+
-+ usba0_pclk.dev = &pdev->dev;
-+ usba0_hclk.dev = &pdev->dev;
-+
-+ platform_device_add(pdev);
-+
-+ return pdev;
-+
-+out_free_pdev:
-+ platform_device_put(pdev);
-+ return NULL;
-+}
-+
-+/* --------------------------------------------------------------------
-+ * IDE / CompactFlash
-+ * -------------------------------------------------------------------- */
-+#if defined(CONFIG_CPU_AT32AP7000) || defined(CONFIG_CPU_AT32AP7001)
-+static struct resource at32_smc_cs4_resource[] __initdata = {
-+ {
-+ .start = 0x04000000,
-+ .end = 0x07ffffff,
-+ .flags = IORESOURCE_MEM,
-+ },
-+ IRQ(~0UL), /* Magic IRQ will be overridden */
-+};
-+static struct resource at32_smc_cs5_resource[] __initdata = {
-+ {
-+ .start = 0x20000000,
-+ .end = 0x23ffffff,
-+ .flags = IORESOURCE_MEM,
-+ },
-+ IRQ(~0UL), /* Magic IRQ will be overridden */
-+};
-+
-+static int __init at32_init_ide_or_cf(struct platform_device *pdev,
-+ unsigned int cs, unsigned int extint)
-+{
-+ static unsigned int extint_pin_map[4] __initdata = {
-+ GPIO_PIN_PB(25),
-+ GPIO_PIN_PB(26),
-+ GPIO_PIN_PB(27),
-+ GPIO_PIN_PB(28),
-+ };
-+ static bool common_pins_initialized __initdata = false;
-+ unsigned int extint_pin;
-+ int ret;
-+
-+ if (extint >= ARRAY_SIZE(extint_pin_map))
-+ return -EINVAL;
-+ extint_pin = extint_pin_map[extint];
-+
-+ switch (cs) {
-+ case 4:
-+ ret = platform_device_add_resources(pdev,
-+ at32_smc_cs4_resource,
-+ ARRAY_SIZE(at32_smc_cs4_resource));
-+ if (ret)
-+ return ret;
-+
-+ select_peripheral(PE(21), PERIPH_A, 0); /* NCS4 -> OE_N */
-+ set_ebi_sfr_bits(HMATRIX_BIT(CS4A));
-+ break;
-+ case 5:
-+ ret = platform_device_add_resources(pdev,
-+ at32_smc_cs5_resource,
-+ ARRAY_SIZE(at32_smc_cs5_resource));
-+ if (ret)
-+ return ret;
-+
-+ select_peripheral(PE(22), PERIPH_A, 0); /* NCS5 -> OE_N */
-+ set_ebi_sfr_bits(HMATRIX_BIT(CS5A));
-+ break;
-+ default:
-+ return -EINVAL;
-+ }
-+
-+ if (!common_pins_initialized) {
-+ select_peripheral(PE(19), PERIPH_A, 0); /* CFCE1 -> CS0_N */
-+ select_peripheral(PE(20), PERIPH_A, 0); /* CFCE2 -> CS1_N */
-+ select_peripheral(PE(23), PERIPH_A, 0); /* CFRNW -> DIR */
-+ select_peripheral(PE(24), PERIPH_A, 0); /* NWAIT <- IORDY */
-+ common_pins_initialized = true;
-+ }
-+
-+ at32_select_periph(extint_pin, GPIO_PERIPH_A, AT32_GPIOF_DEGLITCH);
-+
-+ pdev->resource[1].start = EIM_IRQ_BASE + extint;
-+ pdev->resource[1].end = pdev->resource[1].start;
-+
-+ return 0;
-+}
-+
-+struct platform_device *__init
-+at32_add_device_ide(unsigned int id, unsigned int extint,
-+ struct ide_platform_data *data)
-+{
-+ struct platform_device *pdev;
-+
-+ pdev = platform_device_alloc("at32_ide", id);
-+ if (!pdev)
-+ goto fail;
-+
-+ if (platform_device_add_data(pdev, data,
-+ sizeof(struct ide_platform_data)))
-+ goto fail;
-+
-+ if (at32_init_ide_or_cf(pdev, data->cs, extint))
-+ goto fail;
-+
-+ platform_device_add(pdev);
-+ return pdev;
-+
-+fail:
-+ platform_device_put(pdev);
-+ return NULL;
-+}
-+
-+struct platform_device *__init
-+at32_add_device_cf(unsigned int id, unsigned int extint,
-+ struct cf_platform_data *data)
-+{
-+ struct platform_device *pdev;
-+
-+ pdev = platform_device_alloc("at32_cf", id);
-+ if (!pdev)
-+ goto fail;
-+
-+ if (platform_device_add_data(pdev, data,
-+ sizeof(struct cf_platform_data)))
-+ goto fail;
-+
-+ if (at32_init_ide_or_cf(pdev, data->cs, extint))
-+ goto fail;
-+
-+ if (data->detect_pin != GPIO_PIN_NONE)
-+ at32_select_gpio(data->detect_pin, AT32_GPIOF_DEGLITCH);
-+ if (data->reset_pin != GPIO_PIN_NONE)
-+ at32_select_gpio(data->reset_pin, 0);
-+ if (data->vcc_pin != GPIO_PIN_NONE)
-+ at32_select_gpio(data->vcc_pin, 0);
-+ /* READY is used as extint, so we can't select it as gpio */
-+
-+ platform_device_add(pdev);
-+ return pdev;
-+
-+fail:
-+ platform_device_put(pdev);
-+ return NULL;
-+}
-+#endif
-+
-+/* --------------------------------------------------------------------
-+ * AC97C
-+ * -------------------------------------------------------------------- */
-+static struct resource atmel_ac97c0_resource[] __initdata = {
-+ PBMEM(0xfff02800),
-+ IRQ(29),
-+};
-+static struct clk atmel_ac97c0_pclk = {
-+ .name = "pclk",
-+ .parent = &pbb_clk,
-+ .mode = pbb_clk_mode,
-+ .get_rate = pbb_clk_get_rate,
-+ .index = 10,
-+};
-+
-+struct platform_device *__init at32_add_device_ac97c(unsigned int id)
-+{
-+ struct platform_device *pdev;
-+
-+ if (id != 0)
-+ return NULL;
-+
-+ pdev = platform_device_alloc("atmel_ac97c", id);
-+ if (!pdev)
-+ return NULL;
-+
-+ if (platform_device_add_resources(pdev, atmel_ac97c0_resource,
-+ ARRAY_SIZE(atmel_ac97c0_resource)))
-+ goto err_add_resources;
-+
-+ select_peripheral(PB(20), PERIPH_B, 0); /* SYNC */
-+ select_peripheral(PB(21), PERIPH_B, 0); /* SDO */
-+ select_peripheral(PB(22), PERIPH_B, 0); /* SDI */
-+ select_peripheral(PB(23), PERIPH_B, 0); /* SCLK */
-+
-+ atmel_ac97c0_pclk.dev = &pdev->dev;
-+
-+ platform_device_add(pdev);
-+ return pdev;
-+
-+err_add_resources:
-+ platform_device_put(pdev);
-+ return NULL;
-+}
-+
-+/* --------------------------------------------------------------------
-+ * ABDAC
-+ * -------------------------------------------------------------------- */
-+static struct resource abdac0_resource[] __initdata = {
-+ PBMEM(0xfff02000),
-+ IRQ(27),
-+};
-+static struct clk abdac0_pclk = {
-+ .name = "pclk",
-+ .parent = &pbb_clk,
-+ .mode = pbb_clk_mode,
-+ .get_rate = pbb_clk_get_rate,
-+ .index = 8,
-+};
-+static struct clk abdac0_sample_clk = {
-+ .name = "sample_clk",
-+ .mode = genclk_mode,
-+ .get_rate = genclk_get_rate,
-+ .set_rate = genclk_set_rate,
-+ .set_parent = genclk_set_parent,
-+ .index = 6,
-+};
-+
-+struct platform_device *__init at32_add_device_abdac(unsigned int id)
-+{
-+ struct platform_device *pdev;
-+
-+ if (id != 0)
-+ return NULL;
-+
-+ pdev = platform_device_alloc("abdac", id);
-+ if (!pdev)
-+ return NULL;
-+
-+ if (platform_device_add_resources(pdev, abdac0_resource,
-+ ARRAY_SIZE(abdac0_resource)))
-+ goto err_add_resources;
-+
-+ select_peripheral(PB(20), PERIPH_A, 0); /* DATA1 */
-+ select_peripheral(PB(21), PERIPH_A, 0); /* DATA0 */
-+ select_peripheral(PB(22), PERIPH_A, 0); /* DATAN1 */
-+ select_peripheral(PB(23), PERIPH_A, 0); /* DATAN0 */
-+
-+ abdac0_pclk.dev = &pdev->dev;
-+ abdac0_sample_clk.dev = &pdev->dev;
-+
-+ platform_device_add(pdev);
-+ return pdev;
-+
-+err_add_resources:
-+ platform_device_put(pdev);
-+ return NULL;
-+}
-+
-+/* --------------------------------------------------------------------
-+ * GCLK
-+ * -------------------------------------------------------------------- */
-+static struct clk gclk0 = {
-+ .name = "gclk0",
-+ .mode = genclk_mode,
-+ .get_rate = genclk_get_rate,
-+ .set_rate = genclk_set_rate,
-+ .set_parent = genclk_set_parent,
-+ .index = 0,
-+};
-+static struct clk gclk1 = {
-+ .name = "gclk1",
-+ .mode = genclk_mode,
-+ .get_rate = genclk_get_rate,
-+ .set_rate = genclk_set_rate,
-+ .set_parent = genclk_set_parent,
-+ .index = 1,
-+};
-+static struct clk gclk2 = {
-+ .name = "gclk2",
-+ .mode = genclk_mode,
-+ .get_rate = genclk_get_rate,
-+ .set_rate = genclk_set_rate,
-+ .set_parent = genclk_set_parent,
-+ .index = 2,
-+};
-+static struct clk gclk3 = {
-+ .name = "gclk3",
-+ .mode = genclk_mode,
-+ .get_rate = genclk_get_rate,
-+ .set_rate = genclk_set_rate,
-+ .set_parent = genclk_set_parent,
-+ .index = 3,
-+};
-+static struct clk gclk4 = {
-+ .name = "gclk4",
-+ .mode = genclk_mode,
-+ .get_rate = genclk_get_rate,
-+ .set_rate = genclk_set_rate,
-+ .set_parent = genclk_set_parent,
-+ .index = 4,
-+};
-+
-+struct clk *at32_clock_list[] = {
-+ &osc32k,
-+ &osc0,
-+ &osc1,
-+ &pll0,
-+ &pll1,
-+ &cpu_clk,
-+ &hsb_clk,
-+ &pba_clk,
-+ &pbb_clk,
-+ &at32_pm_pclk,
-+ &at32_intc0_pclk,
-+ &hmatrix_clk,
-+ &ebi_clk,
-+ &hramc_clk,
-+ &smc0_pclk,
-+ &smc0_mck,
-+ &pdc_hclk,
-+ &pdc_pclk,
-+ &dmaca0_hclk,
-+ &pico_clk,
-+ &pio0_mck,
-+ &pio1_mck,
-+ &pio2_mck,
-+ &pio3_mck,
-+ &pio4_mck,
-+ &at32_systc0_pclk,
-+ &atmel_usart0_usart,
-+ &atmel_usart1_usart,
-+ &atmel_usart2_usart,
-+ &atmel_usart3_usart,
-+ &atmel_pwm0_mck,
-+#if defined(CONFIG_CPU_AT32AP7000)
-+ &macb0_hclk,
-+ &macb0_pclk,
-+ &macb1_hclk,
-+ &macb1_pclk,
-+#endif
-+ &atmel_spi0_spi_clk,
-+ &atmel_spi1_spi_clk,
-+ &atmel_twi0_pclk,
-+ &atmel_mci0_pclk,
-+#if defined(CONFIG_CPU_AT32AP7000) || defined(CONFIG_CPU_AT32AP7002)
-+ &atmel_lcdfb0_hck1,
-+ &atmel_lcdfb0_pixclk,
-+#endif
-+ &ssc0_pclk,
-+ &ssc1_pclk,
-+ &ssc2_pclk,
-+ &usba0_hclk,
-+ &usba0_pclk,
-+ &atmel_ac97c0_pclk,
-+ &abdac0_pclk,
-+ &abdac0_sample_clk,
-+ &gclk0,
-+ &gclk1,
-+ &gclk2,
-+ &gclk3,
-+ &gclk4,
-+};
-+unsigned int at32_nr_clocks = ARRAY_SIZE(at32_clock_list);
-+
-+void __init at32_portmux_init(void)
-+{
-+ at32_init_pio(&pio0_device);
-+ at32_init_pio(&pio1_device);
-+ at32_init_pio(&pio2_device);
-+ at32_init_pio(&pio3_device);
-+ at32_init_pio(&pio4_device);
-+}
-+
-+void __init at32_clock_init(void)
-+{
-+ u32 cpu_mask = 0, hsb_mask = 0, pba_mask = 0, pbb_mask = 0;
-+ int i;
-+
-+ if (pm_readl(MCCTRL) & PM_BIT(PLLSEL)) {
-+ main_clock = &pll0;
-+ cpu_clk.parent = &pll0;
-+ } else {
-+ main_clock = &osc0;
-+ cpu_clk.parent = &osc0;
-+ }
-+
-+ if (pm_readl(PLL0) & PM_BIT(PLLOSC))
-+ pll0.parent = &osc1;
-+ if (pm_readl(PLL1) & PM_BIT(PLLOSC))
-+ pll1.parent = &osc1;
-+
-+ genclk_init_parent(&gclk0);
-+ genclk_init_parent(&gclk1);
-+ genclk_init_parent(&gclk2);
-+ genclk_init_parent(&gclk3);
-+ genclk_init_parent(&gclk4);
-+#if defined(CONFIG_CPU_AT32AP7000) || defined(CONFIG_CPU_AT32AP7002)
-+ genclk_init_parent(&atmel_lcdfb0_pixclk);
-+#endif
-+ genclk_init_parent(&abdac0_sample_clk);
-+
-+ /*
-+ * Turn on all clocks that have at least one user already, and
-+ * turn off everything else. We only do this for module
-+ * clocks, and even though it isn't particularly pretty to
-+ * check the address of the mode function, it should do the
-+ * trick...
-+ */
-+ for (i = 0; i < ARRAY_SIZE(at32_clock_list); i++) {
-+ struct clk *clk = at32_clock_list[i];
-+
-+ if (clk->users == 0)
-+ continue;
-+
-+ if (clk->mode == &cpu_clk_mode)
-+ cpu_mask |= 1 << clk->index;
-+ else if (clk->mode == &hsb_clk_mode)
-+ hsb_mask |= 1 << clk->index;
-+ else if (clk->mode == &pba_clk_mode)
-+ pba_mask |= 1 << clk->index;
-+ else if (clk->mode == &pbb_clk_mode)
-+ pbb_mask |= 1 << clk->index;
-+ }
-+
-+ pm_writel(CPU_MASK, cpu_mask);
-+ pm_writel(HSB_MASK, hsb_mask);
-+ pm_writel(PBA_MASK, pba_mask);
-+ pm_writel(PBB_MASK, pbb_mask);
-+}
-diff -Nrup linux-2.6.24/arch/avr32/mach-at32ap/extint.c linux-avr32/arch/avr32/mach-at32ap/extint.c
---- linux-2.6.24/arch/avr32/mach-at32ap/extint.c 2008-01-24 17:58:37.000000000 -0500
-+++ linux-avr32/arch/avr32/mach-at32ap/extint.c 2008-02-01 14:51:35.000000000 -0500
-@@ -26,16 +26,10 @@
- #define EIC_MODE 0x0014
- #define EIC_EDGE 0x0018
- #define EIC_LEVEL 0x001c
--#define EIC_TEST 0x0020
- #define EIC_NMIC 0x0024
-
--/* Bitfields in TEST */
--#define EIC_TESTEN_OFFSET 31
--#define EIC_TESTEN_SIZE 1
--
- /* Bitfields in NMIC */
--#define EIC_EN_OFFSET 0
--#define EIC_EN_SIZE 1
-+#define EIC_NMIC_ENABLE (1 << 0)
-
- /* Bit manipulation macros */
- #define EIC_BIT(name) \
-@@ -63,6 +57,9 @@ struct eic {
- unsigned int first_irq;
- };
-
-+static struct eic *nmi_eic;
-+static bool nmi_enabled;
-+
- static void eic_ack_irq(unsigned int irq)
- {
- struct eic *eic = get_irq_chip_data(irq);
-@@ -133,8 +130,11 @@ static int eic_set_irq_type(unsigned int
- eic_writel(eic, EDGE, edge);
- eic_writel(eic, LEVEL, level);
-
-- if (flow_type & (IRQ_TYPE_LEVEL_LOW | IRQ_TYPE_LEVEL_HIGH))
-+ if (flow_type & (IRQ_TYPE_LEVEL_LOW | IRQ_TYPE_LEVEL_HIGH)) {
- flow_type |= IRQ_LEVEL;
-+ __set_irq_handler_unlocked(irq, handle_level_irq);
-+ } else
-+ __set_irq_handler_unlocked(irq, handle_edge_irq);
- desc->status &= ~(IRQ_TYPE_SENSE_MASK | IRQ_LEVEL);
- desc->status |= flow_type;
- }
-@@ -154,9 +154,8 @@ static struct irq_chip eic_chip = {
- static void demux_eic_irq(unsigned int irq, struct irq_desc *desc)
- {
- struct eic *eic = desc->handler_data;
-- struct irq_desc *ext_desc;
- unsigned long status, pending;
-- unsigned int i, ext_irq;
-+ unsigned int i;
-
- status = eic_readl(eic, ISR);
- pending = status & eic_readl(eic, IMR);
-@@ -165,15 +164,28 @@ static void demux_eic_irq(unsigned int i
- i = fls(pending) - 1;
- pending &= ~(1 << i);
-
-- ext_irq = i + eic->first_irq;
-- ext_desc = irq_desc + ext_irq;
-- if (ext_desc->status & IRQ_LEVEL)
-- handle_level_irq(ext_irq, ext_desc);
-- else
-- handle_edge_irq(ext_irq, ext_desc);
-+ generic_handle_irq(i + eic->first_irq);
- }
- }
-
-+int nmi_enable(void)
-+{
-+ nmi_enabled = true;
-+
-+ if (nmi_eic)
-+ eic_writel(nmi_eic, NMIC, EIC_NMIC_ENABLE);
-+
-+ return 0;
-+}
-+
-+void nmi_disable(void)
-+{
-+ if (nmi_eic)
-+ eic_writel(nmi_eic, NMIC, 0);
-+
-+ nmi_enabled = false;
-+}
-+
- static int __init eic_probe(struct platform_device *pdev)
- {
- struct eic *eic;
-@@ -214,14 +226,13 @@ static int __init eic_probe(struct platf
- pattern = eic_readl(eic, MODE);
- nr_irqs = fls(pattern);
-
-- /* Trigger on falling edge unless overridden by driver */
-- eic_writel(eic, MODE, 0UL);
-+ /* Trigger on low level unless overridden by driver */
- eic_writel(eic, EDGE, 0UL);
-+ eic_writel(eic, LEVEL, 0UL);
-
- eic->chip = &eic_chip;
-
- for (i = 0; i < nr_irqs; i++) {
-- /* NOTE the handler we set here is ignored by the demux */
- set_irq_chip_and_handler(eic->first_irq + i, &eic_chip,
- handle_level_irq);
- set_irq_chip_data(eic->first_irq + i, eic);
-@@ -230,6 +241,16 @@ static int __init eic_probe(struct platf
- set_irq_chained_handler(int_irq, demux_eic_irq);
- set_irq_data(int_irq, eic);
-
-+ if (pdev->id == 0) {
-+ nmi_eic = eic;
-+ if (nmi_enabled)
-+ /*
-+ * Someone tried to enable NMI before we were
-+ * ready. Do it now.
-+ */
-+ nmi_enable();
-+ }
-+
- dev_info(&pdev->dev,
- "External Interrupt Controller at 0x%p, IRQ %u\n",
- eic->regs, int_irq);
-diff -Nrup linux-2.6.24/arch/avr32/mach-at32ap/gpio-dev.c linux-avr32/arch/avr32/mach-at32ap/gpio-dev.c
---- linux-2.6.24/arch/avr32/mach-at32ap/gpio-dev.c 1969-12-31 19:00:00.000000000 -0500
-+++ linux-avr32/arch/avr32/mach-at32ap/gpio-dev.c 2008-02-01 14:51:35.000000000 -0500
-@@ -0,0 +1,573 @@
-+/*
-+ * GPIO /dev and configfs interface
-+ *
-+ * Copyright (C) 2006-2007 Atmel Corporation
-+ *
-+ * This program is free software; you can redistribute it and/or modify
-+ * it under the terms of the GNU General Public License version 2 as
-+ * published by the Free Software Foundation.
-+ */
-+#include <linux/kernel.h>
-+#include <linux/configfs.h>
-+#include <linux/cdev.h>
-+#include <linux/device.h>
-+#include <linux/fs.h>
-+#include <linux/interrupt.h>
-+#include <linux/module.h>
-+#include <linux/poll.h>
-+#include <linux/uaccess.h>
-+#include <linux/wait.h>
-+
-+#include <asm/gpio.h>
-+#include <asm/arch/portmux.h>
-+
-+#define GPIO_DEV_MAX 8
-+
-+static struct class *gpio_dev_class;
-+static dev_t gpio_devt;
-+
-+struct gpio_item {
-+ spinlock_t lock;
-+
-+ int enabled;
-+ int initialized;
-+ int port;
-+ u32 pin_mask;
-+ u32 oe_mask;
-+
-+ /* Pin state last time we read it (for blocking reads) */
-+ u32 pin_state;
-+ int changed;
-+
-+ wait_queue_head_t change_wq;
-+ struct fasync_struct *async_queue;
-+
-+ int id;
-+ struct class_device *gpio_dev;
-+ struct cdev char_dev;
-+ struct config_item item;
-+};
-+
-+struct gpio_attribute {
-+ struct configfs_attribute attr;
-+ ssize_t (*show)(struct gpio_item *, char *);
-+ ssize_t (*store)(struct gpio_item *, const char *, size_t);
-+};
-+
-+static irqreturn_t gpio_dev_interrupt(int irq, void *dev_id)
-+{
-+ struct gpio_item *gpio = dev_id;
-+ u32 old_state, new_state;
-+
-+ old_state = gpio->pin_state;
-+ new_state = at32_gpio_get_value_multiple(gpio->port, gpio->pin_mask);
-+ gpio->pin_state = new_state;
-+
-+ if (new_state != old_state) {
-+ gpio->changed = 1;
-+ wake_up_interruptible(&gpio->change_wq);
-+
-+ if (gpio->async_queue)
-+ kill_fasync(&gpio->async_queue, SIGIO, POLL_IN);
-+ }
-+
-+ return IRQ_HANDLED;
-+}
-+
-+static int gpio_dev_open(struct inode *inode, struct file *file)
-+{
-+ struct gpio_item *gpio = container_of(inode->i_cdev,
-+ struct gpio_item,
-+ char_dev);
-+ unsigned int irq;
-+ unsigned int i;
-+ int ret;
-+
-+ nonseekable_open(inode, file);
-+ config_item_get(&gpio->item);
-+ file->private_data = gpio;
-+
-+ gpio->pin_state = at32_gpio_get_value_multiple(gpio->port,
-+ gpio->pin_mask);
-+ gpio->changed = 1;
-+
-+ for (i = 0; i < 32; i++) {
-+ if (gpio->pin_mask & (1 << i)) {
-+ irq = gpio_to_irq(32 * gpio->port + i);
-+ ret = request_irq(irq, gpio_dev_interrupt, 0,
-+ "gpio-dev", gpio);
-+ if (ret)
-+ goto err_irq;
-+ }
-+ }
-+
-+ return 0;
-+
-+err_irq:
-+ while (i--) {
-+ if (gpio->pin_mask & (1 << i)) {
-+ irq = gpio_to_irq(32 * gpio->port + i);
-+ free_irq(irq, gpio);
-+ }
-+ }
-+
-+ config_item_put(&gpio->item);
-+
-+ return ret;
-+}
-+
-+static int gpio_dev_fasync(int fd, struct file *file, int mode)
-+{
-+ struct gpio_item *gpio = file->private_data;
-+
-+ return fasync_helper(fd, file, mode, &gpio->async_queue);
-+}
-+
-+static int gpio_dev_release(struct inode *inode, struct file *file)
-+{
-+ struct gpio_item *gpio = file->private_data;
-+ unsigned int irq;
-+ unsigned int i;
-+
-+ gpio_dev_fasync(-1, file, 0);
-+
-+ for (i = 0; i < 32; i++) {
-+ if (gpio->pin_mask & (1 << i)) {
-+ irq = gpio_to_irq(32 * gpio->port + i);
-+ free_irq(irq, gpio);
-+ }
-+ }
-+
-+ config_item_put(&gpio->item);
-+
-+ return 0;
-+}
-+
-+static unsigned int gpio_dev_poll(struct file *file, poll_table *wait)
-+{
-+ struct gpio_item *gpio = file->private_data;
-+ unsigned int mask = 0;
-+
-+ poll_wait(file, &gpio->change_wq, wait);
-+ if (gpio->changed)
-+ mask |= POLLIN | POLLRDNORM;
-+
-+ return mask;
-+}
-+
-+static ssize_t gpio_dev_read(struct file *file, char __user *buf,
-+ size_t count, loff_t *offset)
-+{
-+ struct gpio_item *gpio = file->private_data;
-+ u32 value;
-+
-+ spin_lock_irq(&gpio->lock);
-+ while (!gpio->changed) {
-+ spin_unlock_irq(&gpio->lock);
-+
-+ if (file->f_flags & O_NONBLOCK)
-+ return -EAGAIN;
-+
-+ if (wait_event_interruptible(gpio->change_wq, gpio->changed))
-+ return -ERESTARTSYS;
-+
-+ spin_lock_irq(&gpio->lock);
-+ }
-+
-+ gpio->changed = 0;
-+ value = at32_gpio_get_value_multiple(gpio->port, gpio->pin_mask);
-+
-+ spin_unlock_irq(&gpio->lock);
-+
-+ count = min(count, (size_t)4);
-+ if (copy_to_user(buf, &value, count))
-+ return -EFAULT;
-+
-+ return count;
-+}
-+
-+static ssize_t gpio_dev_write(struct file *file, const char __user *buf,
-+ size_t count, loff_t *offset)
-+{
-+ struct gpio_item *gpio = file->private_data;
-+ u32 value = 0;
-+ u32 mask = ~0UL;
-+
-+ count = min(count, (size_t)4);
-+ if (copy_from_user(&value, buf, count))
-+ return -EFAULT;
-+
-+ /* Assuming big endian */
-+ mask <<= (4 - count) * 8;
-+ mask &= gpio->pin_mask;
-+
-+ at32_gpio_set_value_multiple(gpio->port, value, mask);
-+
-+ return count;
-+}
-+
-+static struct file_operations gpio_dev_fops = {
-+ .owner = THIS_MODULE,
-+ .llseek = no_llseek,
-+ .open = gpio_dev_open,
-+ .release = gpio_dev_release,
-+ .fasync = gpio_dev_fasync,
-+ .poll = gpio_dev_poll,
-+ .read = gpio_dev_read,
-+ .write = gpio_dev_write,
-+};
-+
-+static struct gpio_item *to_gpio_item(struct config_item *item)
-+{
-+ return item ? container_of(item, struct gpio_item, item) : NULL;
-+}
-+
-+static ssize_t gpio_show_gpio_id(struct gpio_item *gpio, char *page)
-+{
-+ return sprintf(page, "%d\n", gpio->port);
-+}
-+
-+static ssize_t gpio_store_gpio_id(struct gpio_item *gpio,
-+ const char *page, size_t count)
-+{
-+ unsigned long id;
-+ char *p = (char *)page;
-+ ssize_t ret = -EINVAL;
-+
-+ id = simple_strtoul(p, &p, 0);
-+ if (!p || (*p && (*p != '\n')))
-+ return -EINVAL;
-+
-+ /* Switching PIO is not allowed when live... */
-+ spin_lock(&gpio->lock);
-+ if (!gpio->enabled) {
-+ ret = -ENXIO;
-+ if (at32_gpio_port_is_valid(id)) {
-+ gpio->port = id;
-+ ret = count;
-+ }
-+ }
-+ spin_unlock(&gpio->lock);
-+
-+ return ret;
-+}
-+
-+static ssize_t gpio_show_pin_mask(struct gpio_item *gpio, char *page)
-+{
-+ return sprintf(page, "0x%08x\n", gpio->pin_mask);
-+}
-+
-+static ssize_t gpio_store_pin_mask(struct gpio_item *gpio,
-+ const char *page, size_t count)
-+{
-+ u32 new_mask;
-+ char *p = (char *)page;
-+ ssize_t ret = -EINVAL;
-+
-+ new_mask = simple_strtoul(p, &p, 0);
-+ if (!p || (*p && (*p != '\n')))
-+ return -EINVAL;
-+
-+ /* Can't update the pin mask while live. */
-+ spin_lock(&gpio->lock);
-+ if (!gpio->enabled) {
-+ gpio->oe_mask &= new_mask;
-+ gpio->pin_mask = new_mask;
-+ ret = count;
-+ }
-+ spin_unlock(&gpio->lock);
-+
-+ return ret;
-+}
-+
-+static ssize_t gpio_show_oe_mask(struct gpio_item *gpio, char *page)
-+{
-+ return sprintf(page, "0x%08x\n", gpio->oe_mask);
-+}
-+
-+static ssize_t gpio_store_oe_mask(struct gpio_item *gpio,
-+ const char *page, size_t count)
-+{
-+ u32 mask;
-+ char *p = (char *)page;
-+ ssize_t ret = -EINVAL;
-+
-+ mask = simple_strtoul(p, &p, 0);
-+ if (!p || (*p && (*p != '\n')))
-+ return -EINVAL;
-+
-+ spin_lock(&gpio->lock);
-+ if (!gpio->enabled) {
-+ gpio->oe_mask = mask & gpio->pin_mask;
-+ ret = count;
-+ }
-+ spin_unlock(&gpio->lock);
-+
-+ return ret;
-+}
-+
-+static ssize_t gpio_show_enabled(struct gpio_item *gpio, char *page)
-+{
-+ return sprintf(page, "%d\n", gpio->enabled);
-+}
-+
-+static ssize_t gpio_store_enabled(struct gpio_item *gpio,
-+ const char *page, size_t count)
-+{
-+ char *p = (char *)page;
-+ int enabled;
-+ int ret;
-+
-+ enabled = simple_strtoul(p, &p, 0);
-+ if (!p || (*p && (*p != '\n')))
-+ return -EINVAL;
-+
-+ /* make it a boolean value */
-+ enabled = !!enabled;
-+
-+ if (gpio->enabled == enabled)
-+ /* No change; do nothing. */
-+ return count;
-+
-+ BUG_ON(gpio->id >= GPIO_DEV_MAX);
-+
-+ if (!enabled) {
-+ class_device_unregister(gpio->gpio_dev);
-+ cdev_del(&gpio->char_dev);
-+ at32_deselect_pins(gpio->port, gpio->pin_mask);
-+ gpio->initialized = 0;
-+ } else {
-+ if (gpio->port < 0 || !gpio->pin_mask)
-+ return -ENODEV;
-+ }
-+
-+ /* Disallow any updates to gpio_id or pin_mask */
-+ spin_lock(&gpio->lock);
-+ gpio->enabled = enabled;
-+ spin_unlock(&gpio->lock);
-+
-+ if (!enabled)
-+ return count;
-+
-+ /* Now, try to allocate the pins */
-+ ret = at32_select_gpio_pins(gpio->port, gpio->pin_mask, gpio->oe_mask);
-+ if (ret)
-+ goto err_alloc_pins;
-+
-+ gpio->initialized = 1;
-+
-+ cdev_init(&gpio->char_dev, &gpio_dev_fops);
-+ gpio->char_dev.owner = THIS_MODULE;
-+ ret = cdev_add(&gpio->char_dev, MKDEV(MAJOR(gpio_devt), gpio->id), 1);
-+ if (ret < 0)
-+ goto err_cdev_add;
-+ gpio->gpio_dev = class_device_create(gpio_dev_class, NULL,
-+ MKDEV(MAJOR(gpio_devt), gpio->id),
-+ NULL,
-+ "gpio%d", gpio->id);
-+ if (IS_ERR(gpio->gpio_dev)) {
-+ printk(KERN_ERR "failed to create gpio%d\n", gpio->id);
-+ ret = PTR_ERR(gpio->gpio_dev);
-+ goto err_class_dev;
-+ }
-+
-+ printk(KERN_INFO "created gpio%d (port%d/0x%08x) as (%d:%d)\n",
-+ gpio->id, gpio->port, gpio->pin_mask,
-+ MAJOR(gpio->gpio_dev->devt), MINOR(gpio->gpio_dev->devt));
-+
-+ return 0;
-+
-+err_class_dev:
-+ cdev_del(&gpio->char_dev);
-+err_cdev_add:
-+ at32_deselect_pins(gpio->port, gpio->pin_mask);
-+ gpio->initialized = 0;
-+err_alloc_pins:
-+ spin_lock(&gpio->lock);
-+ gpio->enabled = 0;
-+ spin_unlock(&gpio->lock);
-+
-+ return ret;
-+}
-+
-+static struct gpio_attribute gpio_item_attr_gpio_id = {
-+ .attr = {
-+ .ca_owner = THIS_MODULE,
-+ .ca_name = "gpio_id",
-+ .ca_mode = S_IRUGO | S_IWUSR,
-+ },
-+ .show = gpio_show_gpio_id,
-+ .store = gpio_store_gpio_id,
-+};
-+static struct gpio_attribute gpio_item_attr_pin_mask = {
-+ .attr = {
-+ .ca_owner = THIS_MODULE,
-+ .ca_name = "pin_mask",
-+ .ca_mode = S_IRUGO | S_IWUSR,
-+ },
-+ .show = gpio_show_pin_mask,
-+ .store = gpio_store_pin_mask,
-+};
-+static struct gpio_attribute gpio_item_attr_oe_mask = {
-+ .attr = {
-+ .ca_owner = THIS_MODULE,
-+ .ca_name = "oe_mask",
-+ .ca_mode = S_IRUGO | S_IWUSR,
-+ },
-+ .show = gpio_show_oe_mask,
-+ .store = gpio_store_oe_mask,
-+};
-+static struct gpio_attribute gpio_item_attr_enabled = {
-+ .attr = {
-+ .ca_owner = THIS_MODULE,
-+ .ca_name = "enabled",
-+ .ca_mode = S_IRUGO | S_IWUSR,
-+ },
-+ .show = gpio_show_enabled,
-+ .store = gpio_store_enabled,
-+};
-+
-+static struct configfs_attribute *gpio_item_attrs[] = {
-+ &gpio_item_attr_gpio_id.attr,
-+ &gpio_item_attr_pin_mask.attr,
-+ &gpio_item_attr_oe_mask.attr,
-+ &gpio_item_attr_enabled.attr,
-+ NULL,
-+};
-+
-+static ssize_t gpio_show_attr(struct config_item *item,
-+ struct configfs_attribute *attr,
-+ char *page)
-+{
-+ struct gpio_item *gpio_item = to_gpio_item(item);
-+ struct gpio_attribute *gpio_attr
-+ = container_of(attr, struct gpio_attribute, attr);
-+ ssize_t ret = 0;
-+
-+ if (gpio_attr->show)
-+ ret = gpio_attr->show(gpio_item, page);
-+ return ret;
-+}
-+
-+static ssize_t gpio_store_attr(struct config_item *item,
-+ struct configfs_attribute *attr,
-+ const char *page, size_t count)
-+{
-+ struct gpio_item *gpio_item = to_gpio_item(item);
-+ struct gpio_attribute *gpio_attr
-+ = container_of(attr, struct gpio_attribute, attr);
-+ ssize_t ret = -EINVAL;
-+
-+ if (gpio_attr->store)
-+ ret = gpio_attr->store(gpio_item, page, count);
-+ return ret;
-+}
-+
-+static void gpio_release(struct config_item *item)
-+{
-+ kfree(to_gpio_item(item));
-+}
-+
-+static struct configfs_item_operations gpio_item_ops = {
-+ .release = gpio_release,
-+ .show_attribute = gpio_show_attr,
-+ .store_attribute = gpio_store_attr,
-+};
-+
-+static struct config_item_type gpio_item_type = {
-+ .ct_item_ops = &gpio_item_ops,
-+ .ct_attrs = gpio_item_attrs,
-+ .ct_owner = THIS_MODULE,
-+};
-+
-+static struct config_item *gpio_make_item(struct config_group *group,
-+ const char *name)
-+{
-+ static int next_id;
-+ struct gpio_item *gpio;
-+
-+ if (next_id >= GPIO_DEV_MAX)
-+ return NULL;
-+
-+ gpio = kzalloc(sizeof(struct gpio_item), GFP_KERNEL);
-+ if (!gpio)
-+ return NULL;
-+
-+ gpio->id = next_id++;
-+ config_item_init_type_name(&gpio->item, name, &gpio_item_type);
-+ spin_lock_init(&gpio->lock);
-+ init_waitqueue_head(&gpio->change_wq);
-+
-+ return &gpio->item;
-+}
-+
-+static void gpio_drop_item(struct config_group *group,
-+ struct config_item *item)
-+{
-+ struct gpio_item *gpio = to_gpio_item(item);
-+
-+ spin_lock(&gpio->lock);
-+ if (gpio->enabled) {
-+ class_device_unregister(gpio->gpio_dev);
-+ cdev_del(&gpio->char_dev);
-+ }
-+
-+ if (gpio->initialized) {
-+ at32_deselect_pins(gpio->port, gpio->pin_mask);
-+ gpio->initialized = 0;
-+ gpio->enabled = 0;
-+ }
-+ spin_unlock(&gpio->lock);
-+}
-+
-+static struct configfs_group_operations gpio_group_ops = {
-+ .make_item = gpio_make_item,
-+ .drop_item = gpio_drop_item,
-+};
-+
-+static struct config_item_type gpio_group_type = {
-+ .ct_group_ops = &gpio_group_ops,
-+ .ct_owner = THIS_MODULE,
-+};
-+
-+static struct configfs_subsystem gpio_subsys = {
-+ .su_group = {
-+ .cg_item = {
-+ .ci_namebuf = "gpio",
-+ .ci_type = &gpio_group_type,
-+ },
-+ },
-+};
-+
-+static int __init gpio_dev_init(void)
-+{
-+ int err;
-+
-+ gpio_dev_class = class_create(THIS_MODULE, "gpio-dev");
-+ if (IS_ERR(gpio_dev_class)) {
-+ err = PTR_ERR(gpio_dev_class);
-+ goto err_class_create;
-+ }
-+
-+ err = alloc_chrdev_region(&gpio_devt, 0, GPIO_DEV_MAX, "gpio");
-+ if (err < 0)
-+ goto err_alloc_chrdev;
-+
-+ /* Configfs initialization */
-+ config_group_init(&gpio_subsys.su_group);
-+ mutex_init(&gpio_subsys.su_mutex);
-+ err = configfs_register_subsystem(&gpio_subsys);
-+ if (err)
-+ goto err_register_subsys;
-+
-+ return 0;
-+
-+err_register_subsys:
-+ unregister_chrdev_region(gpio_devt, GPIO_DEV_MAX);
-+err_alloc_chrdev:
-+ class_destroy(gpio_dev_class);
-+err_class_create:
-+ printk(KERN_WARNING "Failed to initialize gpio /dev interface\n");
-+ return err;
-+}
-+late_initcall(gpio_dev_init);
-diff -Nrup linux-2.6.24/arch/avr32/mach-at32ap/Kconfig linux-avr32/arch/avr32/mach-at32ap/Kconfig
---- linux-2.6.24/arch/avr32/mach-at32ap/Kconfig 2008-01-24 17:58:37.000000000 -0500
-+++ linux-avr32/arch/avr32/mach-at32ap/Kconfig 2008-02-01 14:51:35.000000000 -0500
-@@ -3,9 +3,9 @@ if PLATFORM_AT32AP
- menu "Atmel AVR32 AP options"
-
- choice
-- prompt "AT32AP7000 static memory bus width"
-- depends on CPU_AT32AP7000
-- default AP7000_16_BIT_SMC
-+ prompt "AT32AP700x static memory bus width"
-+ depends on CPU_AT32AP700X
-+ default AP700X_16_BIT_SMC
- help
- Define the width of the AP7000 external static memory interface.
- This is used to determine how to mangle the address and/or data
-@@ -15,17 +15,24 @@ choice
- width for all chip selects, excluding the flash (which is using
- raw access and is thus not affected by any of this.)
-
--config AP7000_32_BIT_SMC
-+config AP700X_32_BIT_SMC
- bool "32 bit"
-
--config AP7000_16_BIT_SMC
-+config AP700X_16_BIT_SMC
- bool "16 bit"
-
--config AP7000_8_BIT_SMC
-+config AP700X_8_BIT_SMC
- bool "8 bit"
-
- endchoice
-
-+config GPIO_DEV
-+ bool "GPIO /dev interface"
-+ select CONFIGFS_FS
-+ default n
-+ help
-+ Say `Y' to enable a /dev interface to the GPIO pins.
-+
- endmenu
-
- endif # PLATFORM_AT32AP
-diff -Nrup linux-2.6.24/arch/avr32/mach-at32ap/Makefile linux-avr32/arch/avr32/mach-at32ap/Makefile
---- linux-2.6.24/arch/avr32/mach-at32ap/Makefile 2008-01-24 17:58:37.000000000 -0500
-+++ linux-avr32/arch/avr32/mach-at32ap/Makefile 2008-02-01 14:51:35.000000000 -0500
-@@ -1,4 +1,5 @@
- obj-y += at32ap.o clock.o intc.o extint.o pio.o hsmc.o
--obj-$(CONFIG_CPU_AT32AP7000) += at32ap7000.o
--obj-$(CONFIG_CPU_AT32AP7000) += time-tc.o
-+obj-$(CONFIG_CPU_AT32AP700X) += at32ap700x.o
-+obj-$(CONFIG_CPU_AT32AP700X) += time-tc.o
- obj-$(CONFIG_CPU_FREQ_AT32AP) += cpufreq.o
-+obj-$(CONFIG_GPIO_DEV) += gpio-dev.o
-diff -Nrup linux-2.6.24/arch/avr32/mach-at32ap/pio.c linux-avr32/arch/avr32/mach-at32ap/pio.c
---- linux-2.6.24/arch/avr32/mach-at32ap/pio.c 2008-01-24 17:58:37.000000000 -0500
-+++ linux-avr32/arch/avr32/mach-at32ap/pio.c 2008-02-01 14:51:35.000000000 -0500
-@@ -162,6 +162,82 @@ fail:
- dump_stack();
- }
-
-+#ifdef CONFIG_GPIO_DEV
-+
-+/* Gang allocators and accessors; used by the GPIO /dev driver */
-+int at32_gpio_port_is_valid(unsigned int port)
-+{
-+ return port < MAX_NR_PIO_DEVICES && pio_dev[port].regs != NULL;
-+}
-+
-+int at32_select_gpio_pins(unsigned int port, u32 pins, u32 oe_mask)
-+{
-+ struct pio_device *pio;
-+ u32 old, new;
-+
-+ pio = &pio_dev[port];
-+ BUG_ON(port > ARRAY_SIZE(pio_dev) || !pio->regs || (oe_mask & ~pins));
-+
-+ /* Try to allocate the pins */
-+ do {
-+ old = pio->pinmux_mask;
-+ if (old & pins)
-+ return -EBUSY;
-+
-+ new = old | pins;
-+ } while (cmpxchg(&pio->pinmux_mask, old, new) != old);
-+
-+ /* That went well, now configure the port */
-+ pio_writel(pio, OER, oe_mask);
-+ pio_writel(pio, PER, pins);
-+
-+ return 0;
-+}
-+
-+void at32_deselect_pins(unsigned int port, u32 pins)
-+{
-+ struct pio_device *pio;
-+ u32 old, new;
-+
-+ pio = &pio_dev[port];
-+ BUG_ON(port > ARRAY_SIZE(pio_dev) || !pio->regs);
-+
-+ /* Return to a "safe" mux configuration */
-+ pio_writel(pio, PUER, pins);
-+ pio_writel(pio, ODR, pins);
-+
-+ /* Deallocate the pins */
-+ do {
-+ old = pio->pinmux_mask;
-+ new = old & ~pins;
-+ } while (cmpxchg(&pio->pinmux_mask, old, new) != old);
-+}
-+
-+u32 at32_gpio_get_value_multiple(unsigned int port, u32 pins)
-+{
-+ struct pio_device *pio;
-+
-+ pio = &pio_dev[port];
-+ BUG_ON(port > ARRAY_SIZE(pio_dev) || !pio->regs);
-+
-+ return pio_readl(pio, PDSR) & pins;
-+}
-+
-+void at32_gpio_set_value_multiple(unsigned int port, u32 value, u32 mask)
-+{
-+ struct pio_device *pio;
-+
-+ pio = &pio_dev[port];
-+ BUG_ON(port > ARRAY_SIZE(pio_dev) || !pio->regs);
-+
-+ /* No atomic updates for now... */
-+ pio_writel(pio, CODR, ~value & mask);
-+ pio_writel(pio, SODR, value & mask);
-+}
-+
-+#endif /* CONFIG_GPIO_DEV */
-+
-+
- /*--------------------------------------------------------------------------*/
-
- /* GPIO API */
-diff -Nrup linux-2.6.24/arch/avr32/Makefile linux-avr32/arch/avr32/Makefile
---- linux-2.6.24/arch/avr32/Makefile 2008-01-24 17:58:37.000000000 -0500
-+++ linux-avr32/arch/avr32/Makefile 2008-02-01 14:51:35.000000000 -0500
-@@ -16,7 +16,7 @@ KBUILD_AFLAGS += -mrelax -mno-pic
- CFLAGS_MODULE += -mno-relax
- LDFLAGS_vmlinux += --relax
-
--cpuflags-$(CONFIG_CPU_AT32AP7000) += -mcpu=ap7000
-+cpuflags-$(CONFIG_PLATFORM_AT32AP) += -march=ap
-
- KBUILD_CFLAGS += $(cpuflags-y)
- KBUILD_AFLAGS += $(cpuflags-y)
-@@ -31,6 +31,8 @@ core-$(CONFIG_BOARD_ATNGW100) += arch/a
- core-$(CONFIG_LOADER_U_BOOT) += arch/avr32/boot/u-boot/
- core-y += arch/avr32/kernel/
- core-y += arch/avr32/mm/
-+drivers-$(CONFIG_OPROFILE) += arch/avr32/oprofile/
-+drivers-y += arch/avr32/drivers/
- libs-y += arch/avr32/lib/
-
- archincdir-$(CONFIG_PLATFORM_AT32AP) := arch-at32ap
-diff -Nrup linux-2.6.24/arch/avr32/mm/dma-coherent.c linux-avr32/arch/avr32/mm/dma-coherent.c
---- linux-2.6.24/arch/avr32/mm/dma-coherent.c 2008-01-24 17:58:37.000000000 -0500
-+++ linux-avr32/arch/avr32/mm/dma-coherent.c 2008-02-01 14:51:35.000000000 -0500
-@@ -41,6 +41,13 @@ static struct page *__dma_alloc(struct d
- struct page *page, *free, *end;
- int order;
-
-+ /* Following is a work-around (a.k.a. hack) to prevent pages
-+ * with __GFP_COMP being passed to split_page() which cannot
-+ * handle them. The real problem is that this flag probably
-+ * should be 0 on AVR32 as it is not supported on this
-+ * platform--see CONFIG_HUGETLB_PAGE. */
-+ gfp &= ~(__GFP_COMP);
-+
- size = PAGE_ALIGN(size);
- order = get_order(size);
-
-diff -Nrup linux-2.6.24/arch/avr32/mm/tlb.c linux-avr32/arch/avr32/mm/tlb.c
---- linux-2.6.24/arch/avr32/mm/tlb.c 2008-01-24 17:58:37.000000000 -0500
-+++ linux-avr32/arch/avr32/mm/tlb.c 2008-02-01 14:51:35.000000000 -0500
-@@ -348,7 +348,7 @@ static int tlb_show(struct seq_file *tlb
- return 0;
- }
-
--static struct seq_operations tlb_ops = {
-+static const struct seq_operations tlb_ops = {
- .start = tlb_start,
- .next = tlb_next,
- .stop = tlb_stop,
-diff -Nrup linux-2.6.24/arch/avr32/oprofile/Makefile linux-avr32/arch/avr32/oprofile/Makefile
---- linux-2.6.24/arch/avr32/oprofile/Makefile 1969-12-31 19:00:00.000000000 -0500
-+++ linux-avr32/arch/avr32/oprofile/Makefile 2008-02-01 14:51:35.000000000 -0500
-@@ -0,0 +1,8 @@
-+obj-$(CONFIG_OPROFILE) += oprofile.o
-+
-+oprofile-y := $(addprefix ../../../drivers/oprofile/, \
-+ oprof.o cpu_buffer.o buffer_sync.o \
-+ event_buffer.o oprofile_files.o \
-+ oprofilefs.o oprofile_stats.o \
-+ timer_int.o)
-+oprofile-y += op_model_avr32.o
-diff -Nrup linux-2.6.24/arch/avr32/oprofile/op_model_avr32.c linux-avr32/arch/avr32/oprofile/op_model_avr32.c
---- linux-2.6.24/arch/avr32/oprofile/op_model_avr32.c 1969-12-31 19:00:00.000000000 -0500
-+++ linux-avr32/arch/avr32/oprofile/op_model_avr32.c 2008-02-01 14:51:35.000000000 -0500
-@@ -0,0 +1,235 @@
-+/*
-+ * AVR32 Performance Counter Driver
-+ *
-+ * Copyright (C) 2005-2007 Atmel Corporation
-+ *
-+ * This program is free software; you can redistribute it and/or modify
-+ * it under the terms of the GNU General Public License version 2 as
-+ * published by the Free Software Foundation.
-+ *
-+ * Author: Ronny Pedersen
-+ */
-+#include <linux/errno.h>
-+#include <linux/interrupt.h>
-+#include <linux/irq.h>
-+#include <linux/oprofile.h>
-+#include <linux/sched.h>
-+#include <linux/types.h>
-+
-+#include <asm/intc.h>
-+#include <asm/sysreg.h>
-+#include <asm/system.h>
-+
-+#define AVR32_PERFCTR_IRQ_GROUP 0
-+#define AVR32_PERFCTR_IRQ_LINE 1
-+
-+enum { PCCNT, PCNT0, PCNT1, NR_counter };
-+
-+struct avr32_perf_counter {
-+ unsigned long enabled;
-+ unsigned long event;
-+ unsigned long count;
-+ unsigned long unit_mask;
-+ unsigned long kernel;
-+ unsigned long user;
-+
-+ u32 ie_mask;
-+ u32 flag_mask;
-+};
-+
-+static struct avr32_perf_counter counter[NR_counter] = {
-+ {
-+ .ie_mask = SYSREG_BIT(IEC),
-+ .flag_mask = SYSREG_BIT(FC),
-+ }, {
-+ .ie_mask = SYSREG_BIT(IE0),
-+ .flag_mask = SYSREG_BIT(F0),
-+ }, {
-+ .ie_mask = SYSREG_BIT(IE1),
-+ .flag_mask = SYSREG_BIT(F1),
-+ },
-+};
-+
-+static void avr32_perf_counter_reset(void)
-+{
-+ /* Reset all counter and disable/clear all interrupts */
-+ sysreg_write(PCCR, (SYSREG_BIT(PCCR_R)
-+ | SYSREG_BIT(PCCR_C)
-+ | SYSREG_BIT(FC)
-+ | SYSREG_BIT(F0)
-+ | SYSREG_BIT(F1)));
-+}
-+
-+static irqreturn_t avr32_perf_counter_interrupt(int irq, void *dev_id)
-+{
-+ struct avr32_perf_counter *ctr = dev_id;
-+ struct pt_regs *regs;
-+ u32 pccr;
-+
-+ if (likely(!(intc_get_pending(AVR32_PERFCTR_IRQ_GROUP)
-+ & (1 << AVR32_PERFCTR_IRQ_LINE))))
-+ return IRQ_NONE;
-+
-+ regs = get_irq_regs();
-+ pccr = sysreg_read(PCCR);
-+
-+ /* Clear the interrupt flags we're about to handle */
-+ sysreg_write(PCCR, pccr);
-+
-+ /* PCCNT */
-+ if (ctr->enabled && (pccr & ctr->flag_mask)) {
-+ sysreg_write(PCCNT, -ctr->count);
-+ oprofile_add_sample(regs, PCCNT);
-+ }
-+ ctr++;
-+ /* PCNT0 */
-+ if (ctr->enabled && (pccr & ctr->flag_mask)) {
-+ sysreg_write(PCNT0, -ctr->count);
-+ oprofile_add_sample(regs, PCNT0);
-+ }
-+ ctr++;
-+ /* PCNT1 */
-+ if (ctr->enabled && (pccr & ctr->flag_mask)) {
-+ sysreg_write(PCNT1, -ctr->count);
-+ oprofile_add_sample(regs, PCNT1);
-+ }
-+
-+ return IRQ_HANDLED;
-+}
-+
-+static int avr32_perf_counter_create_files(struct super_block *sb,
-+ struct dentry *root)
-+{
-+ struct dentry *dir;
-+ unsigned int i;
-+ char filename[4];
-+
-+ for (i = 0; i < NR_counter; i++) {
-+ snprintf(filename, sizeof(filename), "%u", i);
-+ dir = oprofilefs_mkdir(sb, root, filename);
-+
-+ oprofilefs_create_ulong(sb, dir, "enabled",
-+ &counter[i].enabled);
-+ oprofilefs_create_ulong(sb, dir, "event",
-+ &counter[i].event);
-+ oprofilefs_create_ulong(sb, dir, "count",
-+ &counter[i].count);
-+
-+ /* Dummy entries */
-+ oprofilefs_create_ulong(sb, dir, "kernel",
-+ &counter[i].kernel);
-+ oprofilefs_create_ulong(sb, dir, "user",
-+ &counter[i].user);
-+ oprofilefs_create_ulong(sb, dir, "unit_mask",
-+ &counter[i].unit_mask);
-+ }
-+
-+ return 0;
-+}
-+
-+static int avr32_perf_counter_setup(void)
-+{
-+ struct avr32_perf_counter *ctr;
-+ u32 pccr;
-+ int ret;
-+ int i;
-+
-+ pr_debug("avr32_perf_counter_setup\n");
-+
-+ if (sysreg_read(PCCR) & SYSREG_BIT(PCCR_E)) {
-+ printk(KERN_ERR
-+ "oprofile: setup: perf counter already enabled\n");
-+ return -EBUSY;
-+ }
-+
-+ ret = request_irq(AVR32_PERFCTR_IRQ_GROUP,
-+ avr32_perf_counter_interrupt, IRQF_SHARED,
-+ "oprofile", counter);
-+ if (ret)
-+ return ret;
-+
-+ avr32_perf_counter_reset();
-+
-+ pccr = 0;
-+ for (i = PCCNT; i < NR_counter; i++) {
-+ ctr = &counter[i];
-+ if (!ctr->enabled)
-+ continue;
-+
-+ pr_debug("enabling counter %d...\n", i);
-+
-+ pccr |= ctr->ie_mask;
-+
-+ switch (i) {
-+ case PCCNT:
-+ /* PCCNT always counts cycles, so no events */
-+ sysreg_write(PCCNT, -ctr->count);
-+ break;
-+ case PCNT0:
-+ pccr |= SYSREG_BF(CONF0, ctr->event);
-+ sysreg_write(PCNT0, -ctr->count);
-+ break;
-+ case PCNT1:
-+ pccr |= SYSREG_BF(CONF1, ctr->event);
-+ sysreg_write(PCNT1, -ctr->count);
-+ break;
-+ }
-+ }
-+
-+ pr_debug("oprofile: writing 0x%x to PCCR...\n", pccr);
-+
-+ sysreg_write(PCCR, pccr);
-+
-+ return 0;
-+}
-+
-+static void avr32_perf_counter_shutdown(void)
-+{
-+ pr_debug("avr32_perf_counter_shutdown\n");
-+
-+ avr32_perf_counter_reset();
-+ free_irq(AVR32_PERFCTR_IRQ_GROUP, counter);
-+}
-+
-+static int avr32_perf_counter_start(void)
-+{
-+ pr_debug("avr32_perf_counter_start\n");
-+
-+ sysreg_write(PCCR, sysreg_read(PCCR) | SYSREG_BIT(PCCR_E));
-+
-+ return 0;
-+}
-+
-+static void avr32_perf_counter_stop(void)
-+{
-+ pr_debug("avr32_perf_counter_stop\n");
-+
-+ sysreg_write(PCCR, sysreg_read(PCCR) & ~SYSREG_BIT(PCCR_E));
-+}
-+
-+static struct oprofile_operations avr32_perf_counter_ops __initdata = {
-+ .create_files = avr32_perf_counter_create_files,
-+ .setup = avr32_perf_counter_setup,
-+ .shutdown = avr32_perf_counter_shutdown,
-+ .start = avr32_perf_counter_start,
-+ .stop = avr32_perf_counter_stop,
-+ .cpu_type = "avr32",
-+};
-+
-+int __init oprofile_arch_init(struct oprofile_operations *ops)
-+{
-+ if (!(current_cpu_data.features & AVR32_FEATURE_PCTR))
-+ return -ENODEV;
-+
-+ memcpy(ops, &avr32_perf_counter_ops,
-+ sizeof(struct oprofile_operations));
-+
-+ printk(KERN_INFO "oprofile: using AVR32 performance monitoring.\n");
-+
-+ return 0;
-+}
-+
-+void oprofile_arch_exit(void)
-+{
-+
-+}
-diff -Nrup linux-2.6.24/Documentation/kernel-parameters.txt linux-avr32/Documentation/kernel-parameters.txt
---- linux-2.6.24/Documentation/kernel-parameters.txt 2008-01-24 17:58:37.000000000 -0500
-+++ linux-avr32/Documentation/kernel-parameters.txt 2008-02-01 14:51:34.000000000 -0500
-@@ -34,6 +34,7 @@ parameter is applicable:
- ALSA ALSA sound support is enabled.
- APIC APIC support is enabled.
- APM Advanced Power Management support is enabled.
-+ AVR32 AVR32 architecture is enabled.
- AX25 Appropriate AX.25 support is enabled.
- BLACKFIN Blackfin architecture is enabled.
- DRM Direct Rendering Management support is enabled.
-@@ -1123,6 +1124,10 @@ and is between 256 and 4096 characters.
- of returning the full 64-bit number.
- The default is to return 64-bit inode numbers.
-
-+ nmi_debug= [KNL,AVR32] Specify one or more actions to take
-+ when a NMI is triggered.
-+ Format: [state][,regs][,debounce][,die]
-+
- nmi_watchdog= [KNL,BUGS=X86-32] Debugging features for SMP kernels
-
- no387 [BUGS=X86-32] Tells the kernel to use the 387 maths
-diff -Nrup linux-2.6.24/drivers/i2c/busses/i2c-atmeltwi.c linux-avr32/drivers/i2c/busses/i2c-atmeltwi.c
---- linux-2.6.24/drivers/i2c/busses/i2c-atmeltwi.c 1969-12-31 19:00:00.000000000 -0500
-+++ linux-avr32/drivers/i2c/busses/i2c-atmeltwi.c 2008-02-01 14:51:37.000000000 -0500
-@@ -0,0 +1,436 @@
-+/*
-+ * i2c Support for Atmel's Two-Wire Interface (TWI)
-+ *
-+ * Based on the work of Copyright (C) 2004 Rick Bronson
-+ * Converted to 2.6 by Andrew Victor <andrew at sanpeople.com>
-+ * Ported to AVR32 and heavily modified by Espen Krangnes
-+ * <ekrangnes at atmel.com>
-+ *
-+ * Copyright (C) 2006 Atmel Corporation
-+ *
-+ * Borrowed heavily from the original work by:
-+ * Copyright (C) 2000 Philip Edelbrock <phil at stimpy.netroedge.com>
-+ *
-+ * Partialy rewriten by Karel Hojdar <cmkaho at seznam.cz>
-+ * bugs removed, interrupt routine markedly rewritten
-+ *
-+ * This program is free software; you can redistribute it and/or modify
-+ * it under the terms of the GNU General Public License as published by
-+ * the Free Software Foundation; either version 2 of the License, or
-+ * (at your option) any later version.
-+ */
-+#undef VERBOSE_DEBUG
-+
-+#include <linux/module.h>
-+#include <linux/slab.h>
-+#include <linux/i2c.h>
-+#include <linux/init.h>
-+#include <linux/clk.h>
-+#include <linux/err.h>
-+#include <linux/interrupt.h>
-+#include <linux/platform_device.h>
-+#include <linux/completion.h>
-+#include <linux/io.h>
-+
-+#include "i2c-atmeltwi.h"
-+
-+static unsigned int baudrate = 100 * 1000;
-+module_param(baudrate, uint, S_IRUGO);
-+MODULE_PARM_DESC(baudrate, "The TWI baudrate");
-+
-+
-+struct atmel_twi {
-+ void __iomem *regs;
-+ struct i2c_adapter adapter;
-+ struct clk *pclk;
-+ struct completion comp;
-+ u32 mask;
-+ u8 *buf;
-+ u16 len;
-+ u16 acks_left;
-+ int status;
-+ unsigned int irq;
-+
-+};
-+#define to_atmel_twi(adap) container_of(adap, struct atmel_twi, adapter)
-+
-+/*
-+ * (Re)Initialize the TWI hardware registers.
-+ */
-+static int twi_hwinit(struct atmel_twi *twi)
-+{
-+ unsigned long cdiv, ckdiv = 0;
-+
-+ /* REVISIT: wait till SCL is high before resetting; otherwise,
-+ * some versions will wedge forever.
-+ */
-+
-+ twi_writel(twi, IDR, ~0UL);
-+ twi_writel(twi, CR, TWI_BIT(SWRST)); /*Reset peripheral*/
-+ twi_readl(twi, SR);
-+
-+ cdiv = (clk_get_rate(twi->pclk) / (2 * baudrate)) - 4;
-+
-+ while (cdiv > 255) {
-+ ckdiv++;
-+ cdiv = cdiv >> 1;
-+ }
-+
-+ /* REVISIT: there are various errata to consider re CDIV and CHDIV
-+ * here, at least on at91 parts.
-+ */
-+
-+ if (ckdiv > 7)
-+ return -EINVAL;
-+ else
-+ twi_writel(twi, CWGR, TWI_BF(CKDIV, ckdiv)
-+ | TWI_BF(CHDIV, cdiv)
-+ | TWI_BF(CLDIV, cdiv));
-+ return 0;
-+}
-+
-+/*
-+ * Waits for the i2c status register to set the specified bitmask
-+ * Returns 0 if timed out ... ~100ms is much longer than the SMBus
-+ * limit, but I2C has no limit at all.
-+ */
-+static int twi_complete(struct atmel_twi *twi, u32 mask)
-+{
-+ int timeout = msecs_to_jiffies(100);
-+
-+ mask |= TWI_BIT(TXCOMP);
-+ twi->mask = mask | TWI_BIT(NACK) | TWI_BIT(OVRE);
-+ init_completion(&twi->comp);
-+
-+ twi_writel(twi, IER, mask);
-+
-+ if (!wait_for_completion_timeout(&twi->comp, timeout)) {
-+ /* RESET TWI interface */
-+ twi_writel(twi, CR, TWI_BIT(SWRST));
-+
-+ /* Reinitialize TWI */
-+ twi_hwinit(twi);
-+
-+ return -ETIMEDOUT;
-+ }
-+ return 0;
-+}
-+
-+/*
-+ * Generic i2c master transfer entrypoint.
-+ */
-+static int twi_xfer(struct i2c_adapter *adap, struct i2c_msg *pmsg, int num)
-+{
-+ struct atmel_twi *twi = to_atmel_twi(adap);
-+ int i;
-+
-+ dev_dbg(&adap->dev, "twi_xfer: processing %d messages:\n", num);
-+
-+ twi->status = 0;
-+ for (i = 0; i < num; i++, pmsg++) {
-+ twi->len = pmsg->len;
-+ twi->buf = pmsg->buf;
-+ twi->acks_left = pmsg->len;
-+ twi_writel(twi, MMR, TWI_BF(DADR, pmsg->addr) |
-+ (pmsg->flags & I2C_M_RD ? TWI_BIT(MREAD) : 0));
-+ twi_writel(twi, IADR, TWI_BF(IADR, pmsg->addr));
-+
-+ dev_dbg(&adap->dev,
-+ "#%d: %s %d byte%s %s dev 0x%02x\n",
-+ i,
-+ pmsg->flags & I2C_M_RD ? "reading" : "writing",
-+ pmsg->len,
-+ pmsg->len > 1 ? "s" : "",
-+ pmsg->flags & I2C_M_RD ? "from" : "to", pmsg->addr);
-+
-+ /* enable */
-+ twi_writel(twi, CR, TWI_BIT(MSEN));
-+
-+ if (pmsg->flags & I2C_M_RD) {
-+ /* cleanup after previous RX overruns */
-+ while (twi_readl(twi, SR) & TWI_BIT(RXRDY))
-+ twi_readl(twi, RHR);
-+
-+ if (twi->len == 1)
-+ twi_writel(twi, CR,
-+ TWI_BIT(START) | TWI_BIT(STOP));
-+ else
-+ twi_writel(twi, CR, TWI_BIT(START));
-+
-+ if (twi_complete(twi, TWI_BIT(RXRDY)) == -ETIMEDOUT) {
-+ dev_dbg(&adap->dev, "RX[%d] timeout. "
-+ "Stopped with %d bytes left\n",
-+ i, twi->acks_left);
-+ return -ETIMEDOUT;
-+ }
-+ } else {
-+ twi_writel(twi, THR, twi->buf[0]);
-+ twi->acks_left--;
-+ /* REVISIT: some chips don't start automagically:
-+ * twi_writel(twi, CR, TWI_BIT(START));
-+ */
-+ if (twi_complete(twi, TWI_BIT(TXRDY)) == -ETIMEDOUT) {
-+ dev_dbg(&adap->dev, "TX[%d] timeout. "
-+ "Stopped with %d bytes left\n",
-+ i, twi->acks_left);
-+ return -ETIMEDOUT;
-+ }
-+ /* REVISIT: an erratum workaround may be needed here;
-+ * see sam9261 "STOP not generated" (START either).
-+ */
-+ }
-+
-+ /* Disable TWI interface */
-+ twi_writel(twi, CR, TWI_BIT(MSDIS));
-+
-+ if (twi->status)
-+ return twi->status;
-+
-+ /* WARNING: This driver lies about properly supporting
-+ * repeated start, or it would *ALWAYS* return here. It
-+ * has issued a STOP. Continuing is a false claim -- that
-+ * a second (or third, etc.) message is part of the same
-+ * "combined" (no STOPs between parts) message.
-+ */
-+
-+ } /* end cur msg */
-+
-+ return i;
-+}
-+
-+
-+static irqreturn_t twi_interrupt(int irq, void *dev_id)
-+{
-+ struct atmel_twi *twi = dev_id;
-+ int status = twi_readl(twi, SR);
-+
-+ /* Save state for later debug prints */
-+ int old_status = status;
-+
-+ if (twi->mask & status) {
-+
-+ status &= twi->mask;
-+
-+ if (status & TWI_BIT(RXRDY)) {
-+ if ((status & TWI_BIT(OVRE)) && twi->acks_left) {
-+ /* Note weakness in fault reporting model:
-+ * we can't say "the first N of these data
-+ * bytes are valid".
-+ */
-+ dev_err(&twi->adapter.dev,
-+ "OVERRUN RX! %04x, lost %d\n",
-+ old_status, twi->acks_left);
-+ twi->acks_left = 0;
-+ twi_writel(twi, CR, TWI_BIT(STOP));
-+ twi->status = -EOVERFLOW;
-+ } else if (twi->acks_left > 0) {
-+ twi->buf[twi->len - twi->acks_left] =
-+ twi_readl(twi, RHR);
-+ twi->acks_left--;
-+ }
-+ if (status & TWI_BIT(TXCOMP))
-+ goto done;
-+ if (twi->acks_left == 1)
-+ twi_writel(twi, CR, TWI_BIT(STOP));
-+
-+ } else if (status & (TWI_BIT(NACK) | TWI_BIT(TXCOMP))) {
-+ goto done;
-+
-+ } else if (status & TWI_BIT(TXRDY)) {
-+ if (twi->acks_left > 0) {
-+ twi->acks_left--;
-+ twi_writel(twi, THR,
-+ twi->buf[twi->len - twi->acks_left]);
-+ } else
-+ twi_writel(twi, CR, TWI_BIT(STOP));
-+ }
-+
-+ if (twi->acks_left == 0)
-+ twi_writel(twi, IDR, ~TWI_BIT(TXCOMP));
-+ }
-+
-+ /* enabling this message helps trigger overruns/underruns ... */
-+ dev_vdbg(&twi->adapter.dev,
-+ "ISR: SR 0x%04X, mask 0x%04X, acks %i\n",
-+ old_status,
-+ twi->acks_left ? twi->mask : TWI_BIT(TXCOMP),
-+ twi->acks_left);
-+
-+ return IRQ_HANDLED;
-+
-+done:
-+ /* Note weak fault reporting model: we can't report how many
-+ * bytes we sent before the NAK, or let upper layers choose
-+ * whether to continue. The I2C stack doesn't allow that...
-+ */
-+ if (status & TWI_BIT(NACK)) {
-+ dev_dbg(&twi->adapter.dev, "NACK received! %d to go\n",
-+ twi->acks_left);
-+ twi->status = -EPIPE;
-+
-+ /* TX underrun morphs automagically into a premature STOP;
-+ * we'll probably observe UVRE even when it's not documented.
-+ */
-+ } else if (twi->acks_left && (twi->mask & TWI_BIT(TXRDY))) {
-+ dev_err(&twi->adapter.dev, "UNDERRUN TX! %04x, %d to go\n",
-+ old_status, twi->acks_left);
-+ twi->status = -ENOSR;
-+ }
-+
-+ twi_writel(twi, IDR, ~0UL);
-+ complete(&twi->comp);
-+
-+ dev_dbg(&twi->adapter.dev, "ISR: SR 0x%04X, acks %i --> %d\n",
-+ old_status, twi->acks_left, twi->status);
-+
-+ return IRQ_HANDLED;
-+}
-+
-+
-+/*
-+ * Return list of supported functionality.
-+ *
-+ * NOTE: see warning above about repeated starts; this driver is falsely
-+ * claiming to support "combined" transfers. The mid-message STOPs mean
-+ * some slaves will never work with this driver. (Use i2c-gpio...)
-+ */
-+static u32 twi_func(struct i2c_adapter *adapter)
-+{
-+ return (I2C_FUNC_I2C | I2C_FUNC_SMBUS_EMUL)
-+ & ~I2C_FUNC_SMBUS_QUICK;
-+}
-+
-+static struct i2c_algorithm twi_algorithm = {
-+ .master_xfer = twi_xfer,
-+ .functionality = twi_func,
-+};
-+
-+/*
-+ * Main initialization routine.
-+ */
-+static int __init twi_probe(struct platform_device *pdev)
-+{
-+ struct atmel_twi *twi;
-+ struct resource *regs;
-+ struct clk *pclk;
-+ struct i2c_adapter *adapter;
-+ int rc, irq;
-+
-+ regs = platform_get_resource(pdev, IORESOURCE_MEM, 0);
-+ if (!regs)
-+ return -ENXIO;
-+
-+ pclk = clk_get(&pdev->dev, "twi_pclk");
-+ if (IS_ERR(pclk))
-+ return PTR_ERR(pclk);
-+ clk_enable(pclk);
-+
-+ rc = -ENOMEM;
-+ twi = kzalloc(sizeof(struct atmel_twi), GFP_KERNEL);
-+ if (!twi) {
-+ dev_dbg(&pdev->dev, "can't allocate interface!\n");
-+ goto err_alloc_twi;
-+ }
-+
-+ twi->pclk = pclk;
-+ twi->regs = ioremap(regs->start, regs->end - regs->start + 1);
-+ if (!twi->regs)
-+ goto err_ioremap;
-+
-+ irq = platform_get_irq(pdev, 0);
-+ rc = request_irq(irq, twi_interrupt, 0, "twi", twi);
-+ if (rc) {
-+ dev_dbg(&pdev->dev, "can't bind irq!\n");
-+ goto err_irq;
-+ }
-+ twi->irq = irq;
-+
-+ rc = twi_hwinit(twi);
-+ if (rc) {
-+ dev_err(&pdev->dev, "Unable to set baudrate\n");
-+ goto err_hw_init;
-+ }
-+
-+ adapter = &twi->adapter;
-+ sprintf(adapter->name, "TWI");
-+ adapter->algo = &twi_algorithm;
-+ adapter->class = I2C_CLASS_ALL;
-+ adapter->nr = pdev->id;
-+ adapter->dev.parent = &pdev->dev;
-+
-+ platform_set_drvdata(pdev, twi);
-+
-+ rc = i2c_add_numbered_adapter(adapter);
-+ if (rc) {
-+ dev_dbg(&pdev->dev, "Adapter %s registration failed\n",
-+ adapter->name);
-+ goto err_register;
-+ }
-+
-+ dev_info(&pdev->dev,
-+ "Atmel TWI/I2C adapter (baudrate %dk) at 0x%08lx.\n",
-+ baudrate/1000, (unsigned long)regs->start);
-+
-+ return 0;
-+
-+
-+err_register:
-+ platform_set_drvdata(pdev, NULL);
-+
-+err_hw_init:
-+ free_irq(irq, twi);
-+
-+err_irq:
-+ iounmap(twi->regs);
-+
-+err_ioremap:
-+ kfree(twi);
-+
-+err_alloc_twi:
-+ clk_disable(pclk);
-+ clk_put(pclk);
-+
-+ return rc;
-+}
-+
-+static int __exit twi_remove(struct platform_device *pdev)
-+{
-+ struct atmel_twi *twi = platform_get_drvdata(pdev);
-+ int res;
-+
-+ platform_set_drvdata(pdev, NULL);
-+ res = i2c_del_adapter(&twi->adapter);
-+ twi_writel(twi, CR, TWI_BIT(MSDIS));
-+ iounmap(twi->regs);
-+ clk_disable(twi->pclk);
-+ clk_put(twi->pclk);
-+ free_irq(twi->irq, twi);
-+ kfree(twi);
-+
-+ return res;
-+}
-+
-+static struct platform_driver twi_driver = {
-+ .remove = __exit_p(twi_remove),
-+ .driver = {
-+ .name = "atmel_twi",
-+ .owner = THIS_MODULE,
-+ },
-+};
-+
-+static int __init atmel_twi_init(void)
-+{
-+ return platform_driver_probe(&twi_driver, twi_probe);
-+}
-+
-+static void __exit atmel_twi_exit(void)
-+{
-+ platform_driver_unregister(&twi_driver);
-+}
-+
-+module_init(atmel_twi_init);
-+module_exit(atmel_twi_exit);
-+
-+MODULE_AUTHOR("Espen Krangnes");
-+MODULE_DESCRIPTION("I2C driver for Atmel TWI");
-+MODULE_LICENSE("GPL");
-diff -Nrup linux-2.6.24/drivers/i2c/busses/i2c-atmeltwi.h linux-avr32/drivers/i2c/busses/i2c-atmeltwi.h
---- linux-2.6.24/drivers/i2c/busses/i2c-atmeltwi.h 1969-12-31 19:00:00.000000000 -0500
-+++ linux-avr32/drivers/i2c/busses/i2c-atmeltwi.h 2008-02-01 14:51:37.000000000 -0500
-@@ -0,0 +1,117 @@
-+/*
-+ * Register definitions for the Atmel Two-Wire Interface
-+ */
-+
-+#ifndef __ATMELTWI_H__
-+#define __ATMELTWI_H__
-+
-+/* TWI register offsets */
-+#define TWI_CR 0x0000
-+#define TWI_MMR 0x0004
-+#define TWI_SMR 0x0008
-+#define TWI_IADR 0x000c
-+#define TWI_CWGR 0x0010
-+#define TWI_SR 0x0020
-+#define TWI_IER 0x0024
-+#define TWI_IDR 0x0028
-+#define TWI_IMR 0x002c
-+#define TWI_RHR 0x0030
-+#define TWI_THR 0x0034
-+
-+/* Bitfields in CR */
-+#define TWI_START_OFFSET 0
-+#define TWI_START_SIZE 1
-+#define TWI_STOP_OFFSET 1
-+#define TWI_STOP_SIZE 1
-+#define TWI_MSEN_OFFSET 2
-+#define TWI_MSEN_SIZE 1
-+#define TWI_MSDIS_OFFSET 3
-+#define TWI_MSDIS_SIZE 1
-+#define TWI_SVEN_OFFSET 4
-+#define TWI_SVEN_SIZE 1
-+#define TWI_SVDIS_OFFSET 5
-+#define TWI_SVDIS_SIZE 1
-+#define TWI_SWRST_OFFSET 7
-+#define TWI_SWRST_SIZE 1
-+
-+/* Bitfields in MMR */
-+#define TWI_IADRSZ_OFFSET 8
-+#define TWI_IADRSZ_SIZE 2
-+#define TWI_MREAD_OFFSET 12
-+#define TWI_MREAD_SIZE 1
-+#define TWI_DADR_OFFSET 16
-+#define TWI_DADR_SIZE 7
-+
-+/* Bitfields in SMR */
-+#define TWI_SADR_OFFSET 16
-+#define TWI_SADR_SIZE 7
-+
-+/* Bitfields in IADR */
-+#define TWI_IADR_OFFSET 0
-+#define TWI_IADR_SIZE 24
-+
-+/* Bitfields in CWGR */
-+#define TWI_CLDIV_OFFSET 0
-+#define TWI_CLDIV_SIZE 8
-+#define TWI_CHDIV_OFFSET 8
-+#define TWI_CHDIV_SIZE 8
-+#define TWI_CKDIV_OFFSET 16
-+#define TWI_CKDIV_SIZE 3
-+
-+/* Bitfields in SR */
-+#define TWI_TXCOMP_OFFSET 0
-+#define TWI_TXCOMP_SIZE 1
-+#define TWI_RXRDY_OFFSET 1
-+#define TWI_RXRDY_SIZE 1
-+#define TWI_TXRDY_OFFSET 2
-+#define TWI_TXRDY_SIZE 1
-+#define TWI_SVDIR_OFFSET 3
-+#define TWI_SVDIR_SIZE 1
-+#define TWI_SVACC_OFFSET 4
-+#define TWI_SVACC_SIZE 1
-+#define TWI_GCACC_OFFSET 5
-+#define TWI_GCACC_SIZE 1
-+#define TWI_OVRE_OFFSET 6
-+#define TWI_OVRE_SIZE 1
-+#define TWI_UNRE_OFFSET 7
-+#define TWI_UNRE_SIZE 1
-+#define TWI_NACK_OFFSET 8
-+#define TWI_NACK_SIZE 1
-+#define TWI_ARBLST_OFFSET 9
-+#define TWI_ARBLST_SIZE 1
-+
-+/* Bitfields in RHR */
-+#define TWI_RXDATA_OFFSET 0
-+#define TWI_RXDATA_SIZE 8
-+
-+/* Bitfields in THR */
-+#define TWI_TXDATA_OFFSET 0
-+#define TWI_TXDATA_SIZE 8
-+
-+/* Constants for IADRSZ */
-+#define TWI_IADRSZ_NO_ADDR 0
-+#define TWI_IADRSZ_ONE_BYTE 1
-+#define TWI_IADRSZ_TWO_BYTES 2
-+#define TWI_IADRSZ_THREE_BYTES 3
-+
-+/* Bit manipulation macros */
-+#define TWI_BIT(name) \
-+ (1 << TWI_##name##_OFFSET)
-+#define TWI_BF(name, value) \
-+ (((value) & ((1 << TWI_##name##_SIZE) - 1)) \
-+ << TWI_##name##_OFFSET)
-+#define TWI_BFEXT(name, value) \
-+ (((value) >> TWI_##name##_OFFSET) \
-+ & ((1 << TWI_##name##_SIZE) - 1))
-+#define TWI_BFINS(name, value, old) \
-+ (((old) & ~(((1 << TWI_##name##_SIZE) - 1) \
-+ << TWI_##name##_OFFSET)) \
-+ | TWI_BF(name, (value)))
-+
-+/* Register access macros */
-+#define twi_readl(port, reg) \
-+ __raw_readl((port)->regs + TWI_##reg)
-+#define twi_writel(port, reg, value) \
-+ __raw_writel((value), (port)->regs + TWI_##reg)
-+
-+#endif /* __ATMELTWI_H__ */
-diff -Nrup linux-2.6.24/drivers/i2c/busses/Kconfig linux-avr32/drivers/i2c/busses/Kconfig
---- linux-2.6.24/drivers/i2c/busses/Kconfig 2008-01-24 17:58:37.000000000 -0500
-+++ linux-avr32/drivers/i2c/busses/Kconfig 2008-02-01 14:51:37.000000000 -0500
-@@ -88,6 +88,14 @@ config I2C_AT91
- to support combined I2C messages. Use the i2c-gpio driver
- unless your system can cope with those limitations.
-
-+config I2C_ATMELTWI
-+ tristate "Atmel Two-Wire Interface (TWI)"
-+ depends on I2C && (ARCH_AT91 || PLATFORM_AT32AP)
-+ help
-+ Atmel on-chip TWI controller. Say Y if you have an AT32 or
-+ AT91-based device and want to use its built-in TWI
-+ functionality.
-+
- config I2C_AU1550
- tristate "Au1550/Au1200 SMBus interface"
- depends on SOC_AU1550 || SOC_AU1200
-diff -Nrup linux-2.6.24/drivers/i2c/busses/Makefile linux-avr32/drivers/i2c/busses/Makefile
---- linux-2.6.24/drivers/i2c/busses/Makefile 2008-01-24 17:58:37.000000000 -0500
-+++ linux-avr32/drivers/i2c/busses/Makefile 2008-02-01 14:51:37.000000000 -0500
-@@ -53,6 +53,7 @@ obj-$(CONFIG_I2C_VIAPRO) += i2c-viapro.o
- obj-$(CONFIG_I2C_VOODOO3) += i2c-voodoo3.o
- obj-$(CONFIG_SCx200_ACB) += scx200_acb.o
- obj-$(CONFIG_SCx200_I2C) += scx200_i2c.o
-+obj-$(CONFIG_I2C_ATMELTWI) += i2c-atmeltwi.o
-
- ifeq ($(CONFIG_I2C_DEBUG_BUS),y)
- EXTRA_CFLAGS += -DDEBUG
-diff -Nrup linux-2.6.24/drivers/leds/Kconfig linux-avr32/drivers/leds/Kconfig
---- linux-2.6.24/drivers/leds/Kconfig 2008-01-24 17:58:37.000000000 -0500
-+++ linux-avr32/drivers/leds/Kconfig 2008-02-01 14:51:38.000000000 -0500
-@@ -18,6 +18,13 @@ config LEDS_CLASS
-
- comment "LED drivers"
-
-+config LEDS_ATMEL_PWM
-+ tristate "LED Support using Atmel PWM outputs"
-+ depends on LEDS_CLASS && ATMEL_PWM
-+ help
-+ This option enables support for LEDs driven using outputs
-+ of the dedicated PWM controller found on newer Atmel SOCs.
-+
- config LEDS_CORGI
- tristate "LED Support for the Sharp SL-C7x0 series"
- depends on LEDS_CLASS && PXA_SHARP_C7xx
-diff -Nrup linux-2.6.24/drivers/leds/leds-atmel-pwm.c linux-avr32/drivers/leds/leds-atmel-pwm.c
---- linux-2.6.24/drivers/leds/leds-atmel-pwm.c 1969-12-31 19:00:00.000000000 -0500
-+++ linux-avr32/drivers/leds/leds-atmel-pwm.c 2008-02-01 14:51:38.000000000 -0500
-@@ -0,0 +1,157 @@
-+#include <linux/kernel.h>
-+#include <linux/platform_device.h>
-+#include <linux/leds.h>
-+#include <linux/io.h>
-+#include <linux/atmel_pwm.h>
-+
-+
-+struct pwmled {
-+ struct led_classdev cdev;
-+ struct pwm_channel pwmc;
-+ struct gpio_led *desc;
-+ u32 mult;
-+ u8 active_low;
-+};
-+
-+
-+/*
-+ * For simplicity, we use "brightness" as if it were a linear function
-+ * of PWM duty cycle. However, a logarithmic function of duty cycle is
-+ * probably a better match for perceived brightness: two is half as bright
-+ * as four, four is half as bright as eight, etc
-+ */
-+static void pwmled_brightness(struct led_classdev *cdev, enum led_brightness b)
-+{
-+ struct pwmled *led;
-+
-+ /* update the duty cycle for the *next* period */
-+ led = container_of(cdev, struct pwmled, cdev);
-+ pwm_channel_writel(&led->pwmc, PWM_CUPD, led->mult * (unsigned) b);
-+}
-+
-+/*
-+ * NOTE: we reuse the platform_data structure of GPIO leds,
-+ * but repurpose its "gpio" number as a PWM channel number.
-+ */
-+static int __init pwmled_probe(struct platform_device *pdev)
-+{
-+ const struct gpio_led_platform_data *pdata;
-+ struct pwmled *leds;
-+ unsigned i;
-+ int status;
-+
-+ pdata = pdev->dev.platform_data;
-+ if (!pdata || pdata->num_leds < 1)
-+ return -ENODEV;
-+
-+ leds = kcalloc(pdata->num_leds, sizeof(*leds), GFP_KERNEL);
-+ if (!leds)
-+ return -ENOMEM;
-+
-+ for (i = 0; i < pdata->num_leds; i++) {
-+ struct pwmled *led = leds + i;
-+ const struct gpio_led *dat = pdata->leds + i;
-+ u32 tmp;
-+
-+ led->cdev.name = dat->name;
-+ led->cdev.brightness = LED_OFF;
-+ led->cdev.brightness_set = pwmled_brightness;
-+ led->cdev.default_trigger = dat->default_trigger;
-+
-+ led->active_low = dat->active_low;
-+
-+ status = pwm_channel_alloc(dat->gpio, &led->pwmc);
-+ if (status < 0)
-+ goto err;
-+
-+ /*
-+ * Prescale clock by 2^x, so PWM counts in low MHz.
-+ * Start each cycle with the LED active, so increasing
-+ * the duty cycle gives us more time on (== brighter).
-+ */
-+ tmp = 5;
-+ if (!led->active_low)
-+ tmp |= PWM_CPR_CPOL;
-+ pwm_channel_writel(&led->pwmc, PWM_CMR, tmp);
-+
-+ /*
-+ * Pick a period so PWM cycles at 100+ Hz; and a multiplier
-+ * for scaling duty cycle: brightness * mult.
-+ */
-+ tmp = (led->pwmc.mck / (1 << 5)) / 100;
-+ tmp /= 255;
-+ led->mult = tmp;
-+ pwm_channel_writel(&led->pwmc, PWM_CDTY,
-+ led->cdev.brightness * 255);
-+ pwm_channel_writel(&led->pwmc, PWM_CPRD,
-+ LED_FULL * tmp);
-+
-+ pwm_channel_enable(&led->pwmc);
-+
-+ /* Hand it over to the LED framework */
-+ status = led_classdev_register(&pdev->dev, &led->cdev);
-+ if (status < 0) {
-+ pwm_channel_free(&led->pwmc);
-+ goto err;
-+ }
-+ }
-+
-+ platform_set_drvdata(pdev, leds);
-+ return 0;
-+
-+err:
-+ if (i > 0) {
-+ for (i = i - 1; i >= 0; i--) {
-+ led_classdev_unregister(&leds[i].cdev);
-+ pwm_channel_free(&leds[i].pwmc);
-+ }
-+ }
-+ kfree(leds);
-+
-+ return status;
-+}
-+
-+static int __exit pwmled_remove(struct platform_device *pdev)
-+{
-+ const struct gpio_led_platform_data *pdata;
-+ struct pwmled *leds;
-+ unsigned i;
-+
-+ pdata = pdev->dev.platform_data;
-+ leds = platform_get_drvdata(pdev);
-+
-+ for (i = 0; i < pdata->num_leds; i++) {
-+ struct pwmled *led = leds + i;
-+
-+ led_classdev_unregister(&led->cdev);
-+ pwm_channel_free(&led->pwmc);
-+ }
-+
-+ kfree(leds);
-+ platform_set_drvdata(pdev, NULL);
-+ return 0;
-+}
-+
-+static struct platform_driver pwmled_driver = {
-+ .driver = {
-+ .name = "leds-atmel-pwm",
-+ .owner = THIS_MODULE,
-+ },
-+ /* REVISIT add suspend() and resume() methods */
-+ .remove = __exit_p(pwmled_remove),
-+};
-+
-+static int __init modinit(void)
-+{
-+ return platform_driver_probe(&pwmled_driver, pwmled_probe);
-+}
-+module_init(modinit);
-+
-+static void __exit modexit(void)
-+{
-+ platform_driver_unregister(&pwmled_driver);
-+}
-+module_exit(modexit);
-+
-+MODULE_DESCRIPTION("Driver for LEDs with PWM-controlled brightness");
-+MODULE_LICENSE("GPL");
-diff -Nrup linux-2.6.24/drivers/leds/Makefile linux-avr32/drivers/leds/Makefile
---- linux-2.6.24/drivers/leds/Makefile 2008-01-24 17:58:37.000000000 -0500
-+++ linux-avr32/drivers/leds/Makefile 2008-02-01 14:51:38.000000000 -0500
-@@ -5,6 +5,7 @@ obj-$(CONFIG_LEDS_CLASS) += led-class.o
- obj-$(CONFIG_LEDS_TRIGGERS) += led-triggers.o
-
- # LED Platform Drivers
-+obj-$(CONFIG_LEDS_ATMEL_PWM) += leds-atmel-pwm.o
- obj-$(CONFIG_LEDS_CORGI) += leds-corgi.o
- obj-$(CONFIG_LEDS_LOCOMO) += leds-locomo.o
- obj-$(CONFIG_LEDS_SPITZ) += leds-spitz.o
-diff -Nrup linux-2.6.24/drivers/misc/atmel_pwm.c linux-avr32/drivers/misc/atmel_pwm.c
---- linux-2.6.24/drivers/misc/atmel_pwm.c 1969-12-31 19:00:00.000000000 -0500
-+++ linux-avr32/drivers/misc/atmel_pwm.c 2008-02-01 14:51:39.000000000 -0500
-@@ -0,0 +1,409 @@
-+#include <linux/module.h>
-+#include <linux/clk.h>
-+#include <linux/err.h>
-+#include <linux/io.h>
-+#include <linux/interrupt.h>
-+#include <linux/platform_device.h>
-+#include <linux/atmel_pwm.h>
-+
-+
-+/*
-+ * This is a simple driver for the PWM controller found in various newer
-+ * Atmel SOCs, including the AVR32 series and the AT91sam9263.
-+ *
-+ * Chips with current Linux ports have only 4 PWM channels, out of max 32.
-+ * AT32UC3A and AT32UC3B chips have 7 channels (but currently no Linux).
-+ * Docs are inconsistent about the width of the channel counter registers;
-+ * it's at least 16 bits, but several places say 20 bits.
-+ */
-+#define PWM_NCHAN 4 /* max 32 */
-+
-+struct pwm {
-+ spinlock_t lock;
-+ struct platform_device *pdev;
-+ u32 mask;
-+ int irq;
-+ void __iomem *base;
-+ struct clk *clk;
-+ struct pwm_channel *channel[PWM_NCHAN];
-+ void (*handler[PWM_NCHAN])(struct pwm_channel *);
-+};
-+
-+
-+/* global PWM controller registers */
-+#define PWM_MR 0x00
-+#define PWM_ENA 0x04
-+#define PWM_DIS 0x08
-+#define PWM_SR 0x0c
-+#define PWM_IER 0x10
-+#define PWM_IDR 0x14
-+#define PWM_IMR 0x18
-+#define PWM_ISR 0x1c
-+
-+static inline void pwm_writel(const struct pwm *p, unsigned offset, u32 val)
-+{
-+ __raw_writel(val, p->base + offset);
-+}
-+
-+static inline u32 pwm_readl(const struct pwm *p, unsigned offset)
-+{
-+ return __raw_readl(p->base + offset);
-+}
-+
-+static inline void __iomem *pwmc_regs(const struct pwm *p, int index)
-+{
-+ return p->base + 0x200 + index * 0x20;
-+}
-+
-+static struct pwm *pwm;
-+
-+static void pwm_dumpregs(struct pwm_channel *ch, char *tag)
-+{
-+ struct device *dev = &pwm->pdev->dev;
-+
-+ dev_dbg(dev, "%s: mr %08x, sr %08x, imr %08x\n",
-+ tag,
-+ pwm_readl(pwm, PWM_MR),
-+ pwm_readl(pwm, PWM_SR),
-+ pwm_readl(pwm, PWM_IMR));
-+ dev_dbg(dev,
-+ "pwm ch%d - mr %08x, dty %u, prd %u, cnt %u\n",
-+ ch->index,
-+ pwm_channel_readl(ch, PWM_CMR),
-+ pwm_channel_readl(ch, PWM_CDTY),
-+ pwm_channel_readl(ch, PWM_CPRD),
-+ pwm_channel_readl(ch, PWM_CCNT));
-+}
-+
-+
-+/**
-+ * pwm_channel_alloc - allocate an unused PWM channel
-+ * @index: identifies the channel
-+ * @ch: structure to be initialized
-+ *
-+ * Drivers allocate PWM channels according to the board's wiring, and
-+ * matching board-specific setup code. Returns zero or negative errno.
-+ */
-+int pwm_channel_alloc(int index, struct pwm_channel *ch)
-+{
-+ unsigned long flags;
-+ int status = 0;
-+
-+ /* insist on PWM init, with this signal pinned out */
-+ if (!pwm || !(pwm->mask & 1 << index))
-+ return -ENODEV;
-+
-+ if (index < 0 || index >= PWM_NCHAN || !ch)
-+ return -EINVAL;
-+ memset(ch, 0, sizeof *ch);
-+
-+ spin_lock_irqsave(&pwm->lock, flags);
-+ if (pwm->channel[index])
-+ status = -EBUSY;
-+ else {
-+ clk_enable(pwm->clk);
-+
-+ ch->regs = pwmc_regs(pwm, index);
-+ ch->index = index;
-+
-+ /* REVISIT: ap7000 seems to go 2x as fast as we expect!! */
-+ ch->mck = clk_get_rate(pwm->clk);
-+
-+ pwm->channel[index] = ch;
-+ pwm->handler[index] = NULL;
-+
-+ /* channel and irq are always disabled when we return */
-+ pwm_writel(pwm, PWM_DIS, 1 << index);
-+ pwm_writel(pwm, PWM_IDR, 1 << index);
-+ }
-+ spin_unlock_irqrestore(&pwm->lock, flags);
-+ return status;
-+}
-+EXPORT_SYMBOL(pwm_channel_alloc);
-+
-+static int pwmcheck(struct pwm_channel *ch)
-+{
-+ int index;
-+
-+ if (!pwm)
-+ return -ENODEV;
-+ if (!ch)
-+ return -EINVAL;
-+ index = ch->index;
-+ if (index < 0 || index >= PWM_NCHAN || pwm->channel[index] != ch)
-+ return -EINVAL;
-+
-+ return index;
-+}
-+
-+/**
-+ * pwm_channel_free - release a previously allocated channel
-+ * @ch: the channel being released
-+ *
-+ * The channel is completely shut down (counter and IRQ disabled),
-+ * and made available for re-use. Returns zero, or negative errno.
-+ */
-+int pwm_channel_free(struct pwm_channel *ch)
-+{
-+ unsigned long flags;
-+ int t;
-+
-+ spin_lock_irqsave(&pwm->lock, flags);
-+ t = pwmcheck(ch);
-+ if (t >= 0) {
-+ pwm->channel[t] = NULL;
-+ pwm->handler[t] = NULL;
-+
-+ /* channel and irq are always disabled when we return */
-+ pwm_writel(pwm, PWM_DIS, 1 << t);
-+ pwm_writel(pwm, PWM_IDR, 1 << t);
-+
-+ clk_disable(pwm->clk);
-+ t = 0;
-+ }
-+ spin_unlock_irqrestore(&pwm->lock, flags);
-+ return t;
-+}
-+EXPORT_SYMBOL(pwm_channel_free);
-+
-+int __pwm_channel_onoff(struct pwm_channel *ch, int enabled)
-+{
-+ unsigned long flags;
-+ int t;
-+
-+ /* OMITTED FUNCTIONALITY: starting several channels in synch */
-+
-+ spin_lock_irqsave(&pwm->lock, flags);
-+ t = pwmcheck(ch);
-+ if (t >= 0) {
-+ pwm_writel(pwm, enabled ? PWM_ENA : PWM_DIS, 1 << t);
-+ t = 0;
-+ pwm_dumpregs(ch, enabled ? "enable" : "disable");
-+ }
-+ spin_unlock_irqrestore(&pwm->lock, flags);
-+
-+ return t;
-+}
-+EXPORT_SYMBOL(__pwm_channel_onoff);
-+
-+/**
-+ * pwm_clk_alloc - allocate and configure CLKA or CLKB
-+ * @prescale: from 0..10, the power of two used to divide MCK
-+ * @div: from 1..255, the linear divisor to use
-+ *
-+ * Returns PWM_CPR_CLKA, PWM_CPR_CLKB, or negative errno. The allocated
-+ * clock will run with a period of (2^prescale * div) / MCK, or twice as
-+ * long if center aligned PWM output is used. The clock must later be
-+ * deconfigured using pwm_clk_free().
-+ */
-+int pwm_clk_alloc(unsigned prescale, unsigned div)
-+{
-+ unsigned long flags;
-+ u32 mr;
-+ u32 val = (prescale << 8) | div;
-+ int ret = -EBUSY;
-+
-+ if (prescale >= 10 || div == 0 || div > 255)
-+ return -EINVAL;
-+
-+ spin_lock_irqsave(&pwm->lock, flags);
-+ mr = pwm_readl(pwm, PWM_MR);
-+ if ((mr & 0xffff) == 0) {
-+ mr |= val;
-+ ret = PWM_CPR_CLKA;
-+ }
-+ if ((mr & (0xffff << 16)) == 0) {
-+ mr |= val << 16;
-+ ret = PWM_CPR_CLKB;
-+ }
-+ if (ret > 0)
-+ pwm_writel(pwm, PWM_MR, mr);
-+ spin_unlock_irqrestore(&pwm->lock, flags);
-+ return ret;
-+}
-+EXPORT_SYMBOL(pwm_clk_alloc);
-+
-+/**
-+ * pwm_clk_free - deconfigure and release CLKA or CLKB
-+ *
-+ * Reverses the effect of pwm_clk_alloc().
-+ */
-+void pwm_clk_free(unsigned clk)
-+{
-+ unsigned long flags;
-+ u32 mr;
-+
-+ spin_lock_irqsave(&pwm->lock, flags);
-+ mr = pwm_readl(pwm, PWM_MR);
-+ if (clk == PWM_CPR_CLKA)
-+ pwm_writel(pwm, PWM_MR, mr & ~(0xffff << 0));
-+ if (clk == PWM_CPR_CLKB)
-+ pwm_writel(pwm, PWM_MR, mr & ~(0xffff << 16));
-+ spin_unlock_irqrestore(&pwm->lock, flags);
-+}
-+EXPORT_SYMBOL(pwm_clk_free);
-+
-+/**
-+ * pwm_channel_handler - manage channel's IRQ handler
-+ * @ch: the channel
-+ * @handler: the handler to use, possibly NULL
-+ *
-+ * If the handler is non-null, the handler will be called after every
-+ * period of this PWM channel. If the handler is null, this channel
-+ * won't generate an IRQ.
-+ */
-+int pwm_channel_handler(struct pwm_channel *ch,
-+ void (*handler)(struct pwm_channel *ch))
-+{
-+ unsigned long flags;
-+ int t;
-+
-+ spin_lock_irqsave(&pwm->lock, flags);
-+ t = pwmcheck(ch);
-+ if (t >= 0) {
-+ pwm->handler[t] = handler;
-+ pwm_writel(pwm, handler ? PWM_IER : PWM_IDR, 1 << t);
-+ t = 0;
-+ }
-+ spin_unlock_irqrestore(&pwm->lock, flags);
-+
-+ return t;
-+}
-+EXPORT_SYMBOL(pwm_channel_handler);
-+
-+static irqreturn_t pwm_irq(int id, void *_pwm)
-+{
-+ struct pwm *p = _pwm;
-+ irqreturn_t handled = IRQ_NONE;
-+ u32 irqstat;
-+ int index;
-+
-+ spin_lock(&p->lock);
-+
-+ /* ack irqs, then handle them */
-+ irqstat = pwm_readl(pwm, PWM_ISR);
-+
-+ while (irqstat) {
-+ struct pwm_channel *ch;
-+ void (*handler)(struct pwm_channel *ch);
-+
-+ index = ffs(irqstat) - 1;
-+ irqstat &= ~(1 << index);
-+ ch = pwm->channel[index];
-+ handler = pwm->handler[index];
-+ if (handler && ch) {
-+ spin_unlock(&p->lock);
-+ handler(ch);
-+ spin_lock(&p->lock);
-+ handled = IRQ_HANDLED;
-+ }
-+ }
-+
-+ spin_unlock(&p->lock);
-+ return handled;
-+}
-+
-+static int __init pwm_probe(struct platform_device *pdev)
-+{
-+ struct resource *r = platform_get_resource(pdev, IORESOURCE_MEM, 0);
-+ int irq = platform_get_irq(pdev, 0);
-+ u32 *mp = pdev->dev.platform_data;
-+ struct pwm *p;
-+ int status = -EIO;
-+
-+ if (pwm)
-+ return -EBUSY;
-+ if (!r || irq < 0 || !mp || !*mp)
-+ return -ENODEV;
-+ if (*mp & ~((1<<PWM_NCHAN)-1)) {
-+ dev_warn(&pdev->dev, "mask 0x%x ... more than %d channels\n",
-+ *mp, PWM_NCHAN);
-+ return -EINVAL;
-+ }
-+
-+ p = kzalloc(sizeof(*p), GFP_KERNEL);
-+ if (!p)
-+ return -ENOMEM;
-+
-+ spin_lock_init(&p->lock);
-+ p->pdev = pdev;
-+ p->mask = *mp;
-+ p->irq = irq;
-+ p->base = ioremap(r->start, r->end - r->start + 1);
-+ if (!p->base)
-+ goto fail;
-+ p->clk = clk_get(&pdev->dev, "mck");
-+ if (IS_ERR(p->clk)) {
-+ status = PTR_ERR(p->clk);
-+ p->clk = NULL;
-+ goto fail;
-+ }
-+
-+ status = request_irq(irq, pwm_irq, 0, pdev->name, p);
-+ if (status < 0)
-+ goto fail;
-+
-+ pwm = p;
-+ platform_set_drvdata(pdev, p);
-+
-+ return 0;
-+
-+fail:
-+ if (p->clk)
-+ clk_put(p->clk);
-+ if (p->base)
-+ iounmap(p->base);
-+
-+ kfree(p);
-+ return status;
-+}
-+
-+static int __exit pwm_remove(struct platform_device *pdev)
-+{
-+ struct pwm *p = platform_get_drvdata(pdev);
-+
-+ if (p != pwm)
-+ return -EINVAL;
-+
-+ clk_enable(pwm->clk);
-+ pwm_writel(pwm, PWM_DIS, (1 << PWM_NCHAN) - 1);
-+ pwm_writel(pwm, PWM_IDR, (1 << PWM_NCHAN) - 1);
-+ clk_disable(pwm->clk);
-+
-+ pwm = NULL;
-+
-+ free_irq(p->irq, p);
-+ clk_put(p->clk);
-+ iounmap(p->base);
-+ kfree(p);
-+
-+ return 0;
-+}
-+
-+static struct platform_driver atmel_pwm_driver = {
-+ .driver = {
-+ .name = "atmel_pwm",
-+ .owner = THIS_MODULE,
-+ },
-+ .remove = __exit_p(pwm_remove),
-+
-+ /* NOTE: PWM can keep running in AVR32 "idle" and "frozen" states;
-+ * and all AT91sam9263 states, albeit at reduced clock rate if
-+ * MCK becomes the slow clock (i.e. what Linux labels STR).
-+ */
-+};
-+
-+static int __init pwm_init(void)
-+{
-+ return platform_driver_probe(&atmel_pwm_driver, pwm_probe);
-+}
-+module_init(pwm_init);
-+
-+static void __exit pwm_exit(void)
-+{
-+ platform_driver_unregister(&atmel_pwm_driver);
-+}
-+module_exit(pwm_exit);
-+
-+MODULE_DESCRIPTION("Driver for AT32/AT91 PWM module");
-+MODULE_LICENSE("GPL");
-diff -Nrup linux-2.6.24/drivers/misc/Kconfig linux-avr32/drivers/misc/Kconfig
---- linux-2.6.24/drivers/misc/Kconfig 2008-01-24 17:58:37.000000000 -0500
-+++ linux-avr32/drivers/misc/Kconfig 2008-02-01 14:51:39.000000000 -0500
-@@ -13,6 +13,15 @@ menuconfig MISC_DEVICES
-
- if MISC_DEVICES
-
-+config ATMEL_PWM
-+ tristate "Atmel AT32/AT91 PWM support"
-+ depends on (AVR32 || AT91) && EXPERIMENTAL
-+ help
-+ This option enables device driver support for the PWM channels
-+ on certain Atmel prcoessors. Pulse Width Modulation is used for
-+ purposes including software controlled power-efficent backlights
-+ on LCD displays, motor control, and waveform generation.
-+
- config IBM_ASM
- tristate "Device driver for IBM RSA service processor"
- depends on X86 && PCI && INPUT && EXPERIMENTAL
-diff -Nrup linux-2.6.24/drivers/misc/Makefile linux-avr32/drivers/misc/Makefile
---- linux-2.6.24/drivers/misc/Makefile 2008-01-24 17:58:37.000000000 -0500
-+++ linux-avr32/drivers/misc/Makefile 2008-02-01 14:51:39.000000000 -0500
-@@ -7,6 +7,7 @@ obj-$(CONFIG_IBM_ASM) += ibmasm/
- obj-$(CONFIG_HDPU_FEATURES) += hdpuftrs/
- obj-$(CONFIG_MSI_LAPTOP) += msi-laptop.o
- obj-$(CONFIG_ASUS_LAPTOP) += asus-laptop.o
-+obj-$(CONFIG_ATMEL_PWM) += atmel_pwm.o
- obj-$(CONFIG_ATMEL_SSC) += atmel-ssc.o
- obj-$(CONFIG_LKDTM) += lkdtm.o
- obj-$(CONFIG_TIFM_CORE) += tifm_core.o
-diff -Nrup linux-2.6.24/drivers/mmc/host/atmel-mci.c linux-avr32/drivers/mmc/host/atmel-mci.c
---- linux-2.6.24/drivers/mmc/host/atmel-mci.c 1969-12-31 19:00:00.000000000 -0500
-+++ linux-avr32/drivers/mmc/host/atmel-mci.c 2008-02-01 14:51:39.000000000 -0500
-@@ -0,0 +1,1176 @@
-+/*
-+ * Atmel MultiMedia Card Interface driver
-+ *
-+ * Copyright (C) 2004-2006 Atmel Corporation
-+ *
-+ * This program is free software; you can redistribute it and/or modify
-+ * it under the terms of the GNU General Public License version 2 as
-+ * published by the Free Software Foundation.
-+ */
-+#include <linux/blkdev.h>
-+#include <linux/clk.h>
-+#include <linux/device.h>
-+#include <linux/dma-mapping.h>
-+#include <linux/init.h>
-+#include <linux/interrupt.h>
-+#include <linux/ioport.h>
-+#include <linux/module.h>
-+#include <linux/platform_device.h>
-+
-+#include <linux/mmc/host.h>
-+
-+#include <asm/dma-controller.h>
-+#include <asm/io.h>
-+#include <asm/arch/board.h>
-+#include <asm/arch/gpio.h>
-+
-+#include "atmel-mci.h"
-+
-+#define DRIVER_NAME "atmel_mci"
-+
-+#define MCI_DATA_ERROR_FLAGS (MCI_BIT(DCRCE) | MCI_BIT(DTOE) | \
-+ MCI_BIT(OVRE) | MCI_BIT(UNRE))
-+
-+enum {
-+ EVENT_CMD_COMPLETE = 0,
-+ EVENT_DATA_COMPLETE,
-+ EVENT_DATA_ERROR,
-+ EVENT_STOP_SENT,
-+ EVENT_STOP_COMPLETE,
-+ EVENT_DMA_COMPLETE,
-+ EVENT_DMA_ERROR,
-+ EVENT_CARD_DETECT,
-+};
-+
-+struct atmel_mci_dma {
-+ struct dma_request_sg req;
-+ unsigned short rx_periph_id;
-+ unsigned short tx_periph_id;
-+};
-+
-+struct atmel_mci {
-+ struct mmc_host *mmc;
-+ void __iomem *regs;
-+ struct atmel_mci_dma dma;
-+
-+ struct mmc_request *mrq;
-+ struct mmc_command *cmd;
-+ struct mmc_data *data;
-+
-+ u32 cmd_status;
-+ u32 data_status;
-+ u32 stop_status;
-+ u32 stop_cmdr;
-+
-+ struct tasklet_struct tasklet;
-+ unsigned long pending_events;
-+ unsigned long completed_events;
-+
-+ int present;
-+ int detect_pin;
-+ int wp_pin;
-+
-+ unsigned long bus_hz;
-+ unsigned long mapbase;
-+ struct clk *mck;
-+ struct platform_device *pdev;
-+
-+#ifdef CONFIG_DEBUG_FS
-+ struct dentry *debugfs_root;
-+ struct dentry *debugfs_regs;
-+ struct dentry *debugfs_req;
-+ struct dentry *debugfs_pending_events;
-+ struct dentry *debugfs_completed_events;
-+#endif
-+};
-+
-+/* Those printks take an awful lot of time... */
-+#ifndef DEBUG
-+static unsigned int fmax = 15000000U;
-+#else
-+static unsigned int fmax = 1000000U;
-+#endif
-+module_param(fmax, uint, 0444);
-+MODULE_PARM_DESC(fmax, "Max frequency in Hz of the MMC bus clock");
-+
-+/* Test bit macros for completed events */
-+#define mci_cmd_is_complete(host) \
-+ test_bit(EVENT_CMD_COMPLETE, &host->completed_events)
-+#define mci_data_is_complete(host) \
-+ test_bit(EVENT_DATA_COMPLETE, &host->completed_events)
-+#define mci_data_error_is_complete(host) \
-+ test_bit(EVENT_DATA_ERROR, &host->completed_events)
-+#define mci_stop_sent_is_complete(host) \
-+ test_bit(EVENT_STOP_SENT, &host->completed_events)
-+#define mci_stop_is_complete(host) \
-+ test_bit(EVENT_STOP_COMPLETE, &host->completed_events)
-+#define mci_dma_is_complete(host) \
-+ test_bit(EVENT_DMA_COMPLETE, &host->completed_events)
-+#define mci_dma_error_is_complete(host) \
-+ test_bit(EVENT_DMA_ERROR, &host->completed_events)
-+#define mci_card_detect_is_complete(host) \
-+ test_bit(EVENT_CARD_DETECT, &host->completed_events)
-+
-+/* Test and clear bit macros for pending events */
-+#define mci_clear_cmd_is_pending(host) \
-+ test_and_clear_bit(EVENT_CMD_COMPLETE, &host->pending_events)
-+#define mci_clear_data_is_pending(host) \
-+ test_and_clear_bit(EVENT_DATA_COMPLETE, &host->pending_events)
-+#define mci_clear_data_error_is_pending(host) \
-+ test_and_clear_bit(EVENT_DATA_ERROR, &host->pending_events)
-+#define mci_clear_stop_sent_is_pending(host) \
-+ test_and_clear_bit(EVENT_STOP_SENT, &host->pending_events)
-+#define mci_clear_stop_is_pending(host) \
-+ test_and_clear_bit(EVENT_STOP_COMPLETE, &host->pending_events)
-+#define mci_clear_dma_error_is_pending(host) \
-+ test_and_clear_bit(EVENT_DMA_ERROR, &host->pending_events)
-+#define mci_clear_card_detect_is_pending(host) \
-+ test_and_clear_bit(EVENT_CARD_DETECT, &host->pending_events)
-+
-+/* Test and set bit macros for completed events */
-+#define mci_set_cmd_is_completed(host) \
-+ test_and_set_bit(EVENT_CMD_COMPLETE, &host->completed_events)
-+#define mci_set_data_is_completed(host) \
-+ test_and_set_bit(EVENT_DATA_COMPLETE, &host->completed_events)
-+#define mci_set_data_error_is_completed(host) \
-+ test_and_set_bit(EVENT_DATA_ERROR, &host->completed_events)
-+#define mci_set_stop_sent_is_completed(host) \
-+ test_and_set_bit(EVENT_STOP_SENT, &host->completed_events)
-+#define mci_set_stop_is_completed(host) \
-+ test_and_set_bit(EVENT_STOP_COMPLETE, &host->completed_events)
-+#define mci_set_dma_error_is_completed(host) \
-+ test_and_set_bit(EVENT_DMA_ERROR, &host->completed_events)
-+#define mci_set_card_detect_is_completed(host) \
-+ test_and_set_bit(EVENT_CARD_DETECT, &host->completed_events)
-+
-+/* Set bit macros for completed events */
-+#define mci_set_cmd_complete(host) \
-+ set_bit(EVENT_CMD_COMPLETE, &host->completed_events)
-+#define mci_set_data_complete(host) \
-+ set_bit(EVENT_DATA_COMPLETE, &host->completed_events)
-+#define mci_set_data_error_complete(host) \
-+ set_bit(EVENT_DATA_ERROR, &host->completed_events)
-+#define mci_set_stop_sent_complete(host) \
-+ set_bit(EVENT_STOP_SENT, &host->completed_events)
-+#define mci_set_stop_complete(host) \
-+ set_bit(EVENT_STOP_COMPLETE, &host->completed_events)
-+#define mci_set_dma_complete(host) \
-+ set_bit(EVENT_DMA_COMPLETE, &host->completed_events)
-+#define mci_set_dma_error_complete(host) \
-+ set_bit(EVENT_DMA_ERROR, &host->completed_events)
-+#define mci_set_card_detect_complete(host) \
-+ set_bit(EVENT_CARD_DETECT, &host->completed_events)
-+
-+/* Set bit macros for pending events */
-+#define mci_set_cmd_pending(host) \
-+ set_bit(EVENT_CMD_COMPLETE, &host->pending_events)
-+#define mci_set_data_pending(host) \
-+ set_bit(EVENT_DATA_COMPLETE, &host->pending_events)
-+#define mci_set_data_error_pending(host) \
-+ set_bit(EVENT_DATA_ERROR, &host->pending_events)
-+#define mci_set_stop_sent_pending(host) \
-+ set_bit(EVENT_STOP_SENT, &host->pending_events)
-+#define mci_set_stop_pending(host) \
-+ set_bit(EVENT_STOP_COMPLETE, &host->pending_events)
-+#define mci_set_dma_error_pending(host) \
-+ set_bit(EVENT_DMA_ERROR, &host->pending_events)
-+#define mci_set_card_detect_pending(host) \
-+ set_bit(EVENT_CARD_DETECT, &host->pending_events)
-+
-+/* Clear bit macros for pending events */
-+#define mci_clear_cmd_pending(host) \
-+ clear_bit(EVENT_CMD_COMPLETE, &host->pending_events)
-+#define mci_clear_data_pending(host) \
-+ clear_bit(EVENT_DATA_COMPLETE, &host->pending_events)
-+#define mci_clear_data_error_pending(host) \
-+ clear_bit(EVENT_DATA_ERROR, &host->pending_events)
-+#define mci_clear_stop_sent_pending(host) \
-+ clear_bit(EVENT_STOP_SENT, &host->pending_events)
-+#define mci_clear_stop_pending(host) \
-+ clear_bit(EVENT_STOP_COMPLETE, &host->pending_events)
-+#define mci_clear_dma_error_pending(host) \
-+ clear_bit(EVENT_DMA_ERROR, &host->pending_events)
-+#define mci_clear_card_detect_pending(host) \
-+ clear_bit(EVENT_CARD_DETECT, &host->pending_events)
-+
-+
-+#ifdef CONFIG_DEBUG_FS
-+#include <linux/debugfs.h>
-+
-+#define DBG_REQ_BUF_SIZE (4096 - sizeof(unsigned int))
-+
-+struct req_dbg_data {
-+ unsigned int nbytes;
-+ char str[DBG_REQ_BUF_SIZE];
-+};
-+
-+static int req_dbg_open(struct inode *inode, struct file *file)
-+{
-+ struct atmel_mci *host;
-+ struct mmc_request *mrq;
-+ struct mmc_command *cmd, *stop;
-+ struct mmc_data *data;
-+ struct req_dbg_data *priv;
-+ char *str;
-+ unsigned long n = 0;
-+
-+ priv = kzalloc(DBG_REQ_BUF_SIZE, GFP_KERNEL);
-+ if (!priv)
-+ return -ENOMEM;
-+ str = priv->str;
-+
-+ mutex_lock(&inode->i_mutex);
-+ host = inode->i_private;
-+
-+ spin_lock_irq(&host->mmc->lock);
-+ mrq = host->mrq;
-+ if (mrq) {
-+ cmd = mrq->cmd;
-+ data = mrq->data;
-+ stop = mrq->stop;
-+ n = snprintf(str, DBG_REQ_BUF_SIZE,
-+ "CMD%u(0x%x) %x %x %x %x %x (err %u)\n",
-+ cmd->opcode, cmd->arg, cmd->flags,
-+ cmd->resp[0], cmd->resp[1], cmd->resp[2],
-+ cmd->resp[3], cmd->error);
-+ if (n < DBG_REQ_BUF_SIZE && data)
-+ n += snprintf(str + n, DBG_REQ_BUF_SIZE - n,
-+ "DATA %u * %u (%u) %x (err %u)\n",
-+ data->blocks, data->blksz,
-+ data->bytes_xfered, data->flags,
-+ data->error);
-+ if (n < DBG_REQ_BUF_SIZE && stop)
-+ n += snprintf(str + n, DBG_REQ_BUF_SIZE - n,
-+ "CMD%u(0x%x) %x %x %x %x %x (err %u)\n",
-+ stop->opcode, stop->arg, stop->flags,
-+ stop->resp[0], stop->resp[1],
-+ stop->resp[2], stop->resp[3],
-+ stop->error);
-+ }
-+ spin_unlock_irq(&host->mmc->lock);
-+ mutex_unlock(&inode->i_mutex);
-+
-+ priv->nbytes = min(n, DBG_REQ_BUF_SIZE);
-+ file->private_data = priv;
-+
-+ return 0;
-+}
-+
-+static ssize_t req_dbg_read(struct file *file, char __user *buf,
-+ size_t nbytes, loff_t *ppos)
-+{
-+ struct req_dbg_data *priv = file->private_data;
-+
-+ return simple_read_from_buffer(buf, nbytes, ppos,
-+ priv->str, priv->nbytes);
-+}
-+
-+static int req_dbg_release(struct inode *inode, struct file *file)
-+{
-+ kfree(file->private_data);
-+ return 0;
-+}
-+
-+static const struct file_operations req_dbg_fops = {
-+ .owner = THIS_MODULE,
-+ .open = req_dbg_open,
-+ .llseek = no_llseek,
-+ .read = req_dbg_read,
-+ .release = req_dbg_release,
-+};
-+
-+static int regs_dbg_open(struct inode *inode, struct file *file)
-+{
-+ struct atmel_mci *host;
-+ unsigned int i;
-+ u32 *data;
-+ int ret = -ENOMEM;
-+
-+ mutex_lock(&inode->i_mutex);
-+ host = inode->i_private;
-+ data = kmalloc(inode->i_size, GFP_KERNEL);
-+ if (!data)
-+ goto out;
-+
-+ spin_lock_irq(&host->mmc->lock);
-+ for (i = 0; i < inode->i_size / 4; i++)
-+ data[i] = __raw_readl(host->regs + i * 4);
-+ spin_unlock_irq(&host->mmc->lock);
-+
-+ file->private_data = data;
-+ ret = 0;
-+
-+out:
-+ mutex_unlock(&inode->i_mutex);
-+
-+ return ret;
-+}
-+
-+static ssize_t regs_dbg_read(struct file *file, char __user *buf,
-+ size_t nbytes, loff_t *ppos)
-+{
-+ struct inode *inode = file->f_dentry->d_inode;
-+ int ret;
-+
-+ mutex_lock(&inode->i_mutex);
-+ ret = simple_read_from_buffer(buf, nbytes, ppos,
-+ file->private_data,
-+ file->f_dentry->d_inode->i_size);
-+ mutex_unlock(&inode->i_mutex);
-+
-+ return ret;
-+}
-+
-+static int regs_dbg_release(struct inode *inode, struct file *file)
-+{
-+ kfree(file->private_data);
-+ return 0;
-+}
-+
-+static const struct file_operations regs_dbg_fops = {
-+ .owner = THIS_MODULE,
-+ .open = regs_dbg_open,
-+ .llseek = generic_file_llseek,
-+ .read = regs_dbg_read,
-+ .release = regs_dbg_release,
-+};
-+
-+static void atmci_init_debugfs(struct atmel_mci *host)
-+{
-+ struct mmc_host *mmc;
-+ struct dentry *root, *regs;
-+ struct resource *res;
-+
-+ mmc = host->mmc;
-+ root = debugfs_create_dir(mmc_hostname(mmc), NULL);
-+ if (IS_ERR(root) || !root)
-+ goto err_root;
-+ host->debugfs_root = root;
-+
-+ regs = debugfs_create_file("regs", 0400, root, host, ®s_dbg_fops);
-+ if (!regs)
-+ goto err_regs;
-+
-+ res = platform_get_resource(host->pdev, IORESOURCE_MEM, 0);
-+ regs->d_inode->i_size = res->end - res->start + 1;
-+ host->debugfs_regs = regs;
-+
-+ host->debugfs_req = debugfs_create_file("req", 0400, root,
-+ host, &req_dbg_fops);
-+ if (!host->debugfs_req)
-+ goto err_req;
-+
-+ host->debugfs_pending_events
-+ = debugfs_create_u32("pending_events", 0400, root,
-+ (u32 *)&host->pending_events);
-+ if (!host->debugfs_pending_events)
-+ goto err_pending_events;
-+
-+ host->debugfs_completed_events
-+ = debugfs_create_u32("completed_events", 0400, root,
-+ (u32 *)&host->completed_events);
-+ if (!host->debugfs_completed_events)
-+ goto err_completed_events;
-+
-+ return;
-+
-+err_completed_events:
-+ debugfs_remove(host->debugfs_pending_events);
-+err_pending_events:
-+ debugfs_remove(host->debugfs_req);
-+err_req:
-+ debugfs_remove(host->debugfs_regs);
-+err_regs:
-+ debugfs_remove(host->debugfs_root);
-+err_root:
-+ host->debugfs_root = NULL;
-+ dev_err(&host->pdev->dev,
-+ "failed to initialize debugfs for %s\n",
-+ mmc_hostname(mmc));
-+}
-+
-+static void atmci_cleanup_debugfs(struct atmel_mci *host)
-+{
-+ if (host->debugfs_root) {
-+ debugfs_remove(host->debugfs_completed_events);
-+ debugfs_remove(host->debugfs_pending_events);
-+ debugfs_remove(host->debugfs_req);
-+ debugfs_remove(host->debugfs_regs);
-+ debugfs_remove(host->debugfs_root);
-+ host->debugfs_root = NULL;
-+ }
-+}
-+#else
-+static inline void atmci_init_debugfs(struct atmel_mci *host)
-+{
-+
-+}
-+
-+static inline void atmci_cleanup_debugfs(struct atmel_mci *host)
-+{
-+
-+}
-+#endif /* CONFIG_DEBUG_FS */
-+
-+static inline unsigned int ns_to_clocks(struct atmel_mci *host,
-+ unsigned int ns)
-+{
-+ return (ns * (host->bus_hz / 1000000) + 999) / 1000;
-+}
-+
-+static void atmci_set_timeout(struct atmel_mci *host,
-+ struct mmc_data *data)
-+{
-+ static unsigned dtomul_to_shift[] = {
-+ 0, 4, 7, 8, 10, 12, 16, 20
-+ };
-+ unsigned timeout;
-+ unsigned dtocyc, dtomul;
-+
-+ timeout = ns_to_clocks(host, data->timeout_ns) + data->timeout_clks;
-+
-+ for (dtomul = 0; dtomul < 8; dtomul++) {
-+ unsigned shift = dtomul_to_shift[dtomul];
-+ dtocyc = (timeout + (1 << shift) - 1) >> shift;
-+ if (dtocyc < 15)
-+ break;
-+ }
-+
-+ if (dtomul >= 8) {
-+ dtomul = 7;
-+ dtocyc = 15;
-+ }
-+
-+ dev_dbg(&host->mmc->class_dev, "setting timeout to %u cycles\n",
-+ dtocyc << dtomul_to_shift[dtomul]);
-+ mci_writel(host, DTOR, (MCI_BF(DTOMUL, dtomul)
-+ | MCI_BF(DTOCYC, dtocyc)));
-+}
-+
-+/*
-+ * Return mask with command flags to be enabled for this command.
-+ */
-+static u32 atmci_prepare_command(struct mmc_host *mmc,
-+ struct mmc_command *cmd)
-+{
-+ u32 cmdr;
-+
-+ cmd->error = 0;
-+
-+ cmdr = MCI_BF(CMDNB, cmd->opcode);
-+
-+ if (cmd->flags & MMC_RSP_PRESENT) {
-+ if (cmd->flags & MMC_RSP_136)
-+ cmdr |= MCI_BF(RSPTYP, MCI_RSPTYP_136_BIT);
-+ else
-+ cmdr |= MCI_BF(RSPTYP, MCI_RSPTYP_48_BIT);
-+ }
-+
-+ /*
-+ * This should really be MAXLAT_5 for CMD2 and ACMD41, but
-+ * it's too difficult to determine whether this is an ACMD or
-+ * not. Better make it 64.
-+ */
-+ cmdr |= MCI_BIT(MAXLAT);
-+
-+ if (mmc->ios.bus_mode == MMC_BUSMODE_OPENDRAIN)
-+ cmdr |= MCI_BIT(OPDCMD);
-+
-+ dev_dbg(&mmc->class_dev,
-+ "cmd: op %02x arg %08x flags %08x, cmdflags %08lx\n",
-+ cmd->opcode, cmd->arg, cmd->flags, (unsigned long)cmdr);
-+
-+ return cmdr;
-+}
-+
-+static void atmci_start_command(struct atmel_mci *host,
-+ struct mmc_command *cmd,
-+ u32 cmd_flags)
-+{
-+ WARN_ON(host->cmd);
-+ host->cmd = cmd;
-+
-+ mci_writel(host, ARGR, cmd->arg);
-+ mci_writel(host, CMDR, cmd_flags);
-+
-+ if (cmd->data)
-+ dma_start_request(host->dma.req.req.dmac,
-+ host->dma.req.req.channel);
-+}
-+
-+/*
-+ * Returns a mask of flags to be set in the command register when the
-+ * command to start the transfer is to be sent.
-+ */
-+static u32 atmci_prepare_data(struct mmc_host *mmc, struct mmc_data *data)
-+{
-+ struct atmel_mci *host = mmc_priv(mmc);
-+ u32 cmd_flags;
-+
-+ WARN_ON(host->data);
-+ host->data = data;
-+
-+ atmci_set_timeout(host, data);
-+ mci_writel(host, BLKR, (MCI_BF(BCNT, data->blocks)
-+ | MCI_BF(BLKLEN, data->blksz)));
-+ host->dma.req.block_size = data->blksz;
-+ host->dma.req.nr_blocks = data->blocks;
-+
-+ cmd_flags = MCI_BF(TRCMD, MCI_TRCMD_START_TRANS);
-+ if (data->flags & MMC_DATA_STREAM)
-+ cmd_flags |= MCI_BF(TRTYP, MCI_TRTYP_STREAM);
-+ else if (data->blocks > 1)
-+ cmd_flags |= MCI_BF(TRTYP, MCI_TRTYP_MULTI_BLOCK);
-+ else
-+ cmd_flags |= MCI_BF(TRTYP, MCI_TRTYP_BLOCK);
-+
-+ if (data->flags & MMC_DATA_READ) {
-+ cmd_flags |= MCI_BIT(TRDIR);
-+ host->dma.req.nr_sg
-+ = dma_map_sg(&host->pdev->dev, data->sg,
-+ data->sg_len, DMA_FROM_DEVICE);
-+ host->dma.req.periph_id = host->dma.rx_periph_id;
-+ host->dma.req.direction = DMA_DIR_PERIPH_TO_MEM;
-+ host->dma.req.data_reg = host->mapbase + MCI_RDR;
-+ } else {
-+ host->dma.req.nr_sg
-+ = dma_map_sg(&host->pdev->dev, data->sg,
-+ data->sg_len, DMA_TO_DEVICE);
-+ host->dma.req.periph_id = host->dma.tx_periph_id;
-+ host->dma.req.direction = DMA_DIR_MEM_TO_PERIPH;
-+ host->dma.req.data_reg = host->mapbase + MCI_TDR;
-+ }
-+ host->dma.req.sg = data->sg;
-+
-+ dma_prepare_request_sg(host->dma.req.req.dmac, &host->dma.req);
-+
-+ return cmd_flags;
-+}
-+
-+static void atmci_request(struct mmc_host *mmc, struct mmc_request *mrq)
-+{
-+ struct atmel_mci *host = mmc_priv(mmc);
-+ struct mmc_data *data = mrq->data;
-+ u32 iflags;
-+ u32 cmdflags = 0;
-+
-+ iflags = mci_readl(host, IMR);
-+ if (iflags)
-+ dev_warn(&mmc->class_dev, "WARNING: IMR=0x%08x\n",
-+ mci_readl(host, IMR));
-+
-+ WARN_ON(host->mrq != NULL);
-+ host->mrq = mrq;
-+ host->pending_events = 0;
-+ host->completed_events = 0;
-+
-+ iflags = MCI_BIT(CMDRDY);
-+ cmdflags = atmci_prepare_command(mmc, mrq->cmd);
-+
-+ if (mrq->stop) {
-+ WARN_ON(!data);
-+
-+ host->stop_cmdr = atmci_prepare_command(mmc, mrq->stop);
-+ host->stop_cmdr |= MCI_BF(TRCMD, MCI_TRCMD_STOP_TRANS);
-+ if (!(data->flags & MMC_DATA_WRITE))
-+ host->stop_cmdr |= MCI_BIT(TRDIR);
-+ if (data->flags & MMC_DATA_STREAM)
-+ host->stop_cmdr |= MCI_BF(TRTYP, MCI_TRTYP_STREAM);
-+ else
-+ host->stop_cmdr |= MCI_BF(TRTYP, MCI_TRTYP_MULTI_BLOCK);
-+ }
-+ if (data) {
-+ cmdflags |= atmci_prepare_data(mmc, data);
-+ iflags |= MCI_DATA_ERROR_FLAGS;
-+ }
-+
-+ atmci_start_command(host, mrq->cmd, cmdflags);
-+ mci_writel(host, IER, iflags);
-+}
-+
-+static void atmci_set_ios(struct mmc_host *mmc, struct mmc_ios *ios)
-+{
-+ struct atmel_mci *host = mmc_priv(mmc);
-+ u32 mr;
-+
-+ if (ios->clock) {
-+ u32 clkdiv;
-+
-+ /* Set clock rate */
-+ clkdiv = host->bus_hz / (2 * ios->clock) - 1;
-+ if (clkdiv > 255) {
-+ dev_warn(&mmc->class_dev,
-+ "clock %u too slow; using %lu\n",
-+ ios->clock, host->bus_hz / (2 * 256));
-+ clkdiv = 255;
-+ }
-+
-+ mr = mci_readl(host, MR);
-+ mr = MCI_BFINS(CLKDIV, clkdiv, mr)
-+ | MCI_BIT(WRPROOF) | MCI_BIT(RDPROOF);
-+ mci_writel(host, MR, mr);
-+
-+ /* Enable the MCI controller */
-+ mci_writel(host, CR, MCI_BIT(MCIEN));
-+ } else {
-+ /* Disable the MCI controller */
-+ mci_writel(host, CR, MCI_BIT(MCIDIS));
-+ }
-+
-+ switch (ios->bus_width) {
-+ case MMC_BUS_WIDTH_1:
-+ mci_writel(host, SDCR, 0);
-+ break;
-+ case MMC_BUS_WIDTH_4:
-+ mci_writel(host, SDCR, MCI_BIT(SDCBUS));
-+ break;
-+ }
-+
-+ switch (ios->power_mode) {
-+ case MMC_POWER_ON:
-+ /* Send init sequence (74 clock cycles) */
-+ mci_writel(host, IDR, ~0UL);
-+ mci_writel(host, CMDR, MCI_BF(SPCMD, MCI_SPCMD_INIT_CMD));
-+ while (!(mci_readl(host, SR) & MCI_BIT(CMDRDY)))
-+ cpu_relax();
-+ break;
-+ default:
-+ /*
-+ * TODO: None of the currently available AVR32-based
-+ * boards allow MMC power to be turned off. Implement
-+ * power control when this can be tested properly.
-+ */
-+ break;
-+ }
-+}
-+
-+static int atmci_get_ro(struct mmc_host *mmc)
-+{
-+ int read_only = 0;
-+ struct atmel_mci *host = mmc_priv(mmc);
-+
-+ if (host->wp_pin >= 0) {
-+ read_only = gpio_get_value(host->wp_pin);
-+ dev_dbg(&mmc->class_dev, "card is %s\n",
-+ read_only ? "read-only" : "read-write");
-+ } else {
-+ dev_dbg(&mmc->class_dev,
-+ "no pin for checking read-only switch."
-+ " Assuming write-enable.\n");
-+ }
-+
-+ return read_only;
-+}
-+
-+static struct mmc_host_ops atmci_ops = {
-+ .request = atmci_request,
-+ .set_ios = atmci_set_ios,
-+ .get_ro = atmci_get_ro,
-+};
-+
-+static void atmci_request_end(struct mmc_host *mmc, struct mmc_request *mrq)
-+{
-+ struct atmel_mci *host = mmc_priv(mmc);
-+
-+ WARN_ON(host->cmd || host->data);
-+ host->mrq = NULL;
-+
-+ mmc_request_done(mmc, mrq);
-+}
-+
-+static void send_stop_cmd(struct mmc_host *mmc, struct mmc_data *data,
-+ u32 flags)
-+{
-+ struct atmel_mci *host = mmc_priv(mmc);
-+
-+ atmci_start_command(host, data->stop, host->stop_cmdr | flags);
-+ mci_writel(host, IER, MCI_BIT(CMDRDY));
-+}
-+
-+static void atmci_data_complete(struct atmel_mci *host, struct mmc_data *data)
-+{
-+ host->data = NULL;
-+ dma_unmap_sg(&host->pdev->dev, data->sg, host->dma.req.nr_sg,
-+ ((data->flags & MMC_DATA_WRITE)
-+ ? DMA_TO_DEVICE : DMA_FROM_DEVICE));
-+
-+ /*
-+ * Data might complete before command for very short transfers
-+ * (like READ_SCR)
-+ */
-+ if (mci_cmd_is_complete(host)
-+ && (!data->stop || mci_stop_is_complete(host)))
-+ atmci_request_end(host->mmc, data->mrq);
-+}
-+
-+static void atmci_command_complete(struct atmel_mci *host,
-+ struct mmc_command *cmd, u32 status)
-+{
-+ if (status & MCI_BIT(RTOE))
-+ cmd->error = -ETIMEDOUT;
-+ else if ((cmd->flags & MMC_RSP_CRC)
-+ && (status & MCI_BIT(RCRCE)))
-+ cmd->error = -EILSEQ;
-+ else if (status & (MCI_BIT(RINDE) | MCI_BIT(RDIRE) | MCI_BIT(RENDE)))
-+ cmd->error = -EIO;
-+
-+ if (cmd->error) {
-+ dev_dbg(&host->mmc->class_dev,
-+ "command error: op=0x%x status=0x%08x\n",
-+ cmd->opcode, status);
-+
-+ if (cmd->data) {
-+ dma_stop_request(host->dma.req.req.dmac,
-+ host->dma.req.req.channel);
-+ mci_writel(host, IDR, MCI_BIT(NOTBUSY)
-+ | MCI_DATA_ERROR_FLAGS);
-+ host->data = NULL;
-+ }
-+ }
-+}
-+
-+static void atmci_tasklet_func(unsigned long priv)
-+{
-+ struct mmc_host *mmc = (struct mmc_host *)priv;
-+ struct atmel_mci *host = mmc_priv(mmc);
-+ struct mmc_request *mrq = host->mrq;
-+ struct mmc_data *data = host->data;
-+
-+ dev_vdbg(&mmc->class_dev,
-+ "tasklet: pending/completed/mask %lx/%lx/%x\n",
-+ host->pending_events, host->completed_events,
-+ mci_readl(host, IMR));
-+
-+ if (mci_clear_cmd_is_pending(host)) {
-+ mci_set_cmd_complete(host);
-+ atmci_command_complete(host, mrq->cmd, host->cmd_status);
-+ if (!host->data || mci_data_is_complete(host)
-+ || mci_data_error_is_complete(host))
-+ atmci_request_end(mmc, mrq);
-+ }
-+ if (mci_clear_stop_is_pending(host)) {
-+ mci_set_stop_complete(host);
-+ atmci_command_complete(host, mrq->stop, host->stop_status);
-+ if (mci_data_is_complete(host)
-+ || mci_data_error_is_complete(host))
-+ atmci_request_end(mmc, mrq);
-+ }
-+ if (mci_clear_dma_error_is_pending(host)) {
-+ mci_set_dma_error_complete(host);
-+ mci_clear_data_pending(host);
-+
-+ /* DMA controller got bus error => invalid address */
-+ data->error = -EIO;
-+
-+ dev_dbg(&mmc->class_dev, "dma error after %u bytes xfered\n",
-+ host->data->bytes_xfered);
-+
-+ if (data->stop
-+ && !mci_set_stop_sent_is_completed(host))
-+ /* TODO: Check if card is still present */
-+ send_stop_cmd(host->mmc, data, 0);
-+
-+ atmci_data_complete(host, data);
-+ }
-+ if (mci_clear_data_error_is_pending(host)) {
-+ u32 status = host->data_status;
-+
-+ mci_set_data_error_complete(host);
-+ mci_clear_data_pending(host);
-+
-+ dma_stop_request(host->dma.req.req.dmac,
-+ host->dma.req.req.channel);
-+
-+ if (status & MCI_BIT(DCRCE)) {
-+ dev_dbg(&mmc->class_dev, "data CRC error\n");
-+ data->error = -EILSEQ;
-+ } else if (status & MCI_BIT(DTOE)) {
-+ dev_dbg(&mmc->class_dev, "data timeout error\n");
-+ data->error = -ETIMEDOUT;
-+ } else {
-+ dev_dbg(&mmc->class_dev, "data FIFO error\n");
-+ data->error = -EIO;
-+ }
-+ dev_dbg(&mmc->class_dev, "bytes xfered: %u\n",
-+ data->bytes_xfered);
-+
-+ if (data->stop
-+ && !mci_set_stop_sent_is_completed(host))
-+ /* TODO: Check if card is still present */
-+ send_stop_cmd(host->mmc, data, 0);
-+
-+ atmci_data_complete(host, data);
-+ }
-+ if (mci_clear_data_is_pending(host)) {
-+ mci_set_data_complete(host);
-+ data->bytes_xfered = data->blocks * data->blksz;
-+ atmci_data_complete(host, data);
-+ }
-+ if (mci_clear_card_detect_is_pending(host)) {
-+ /* Reset controller if card is gone */
-+ if (!host->present) {
-+ mci_writel(host, CR, MCI_BIT(SWRST));
-+ mci_writel(host, IDR, ~0UL);
-+ mci_writel(host, CR, MCI_BIT(MCIEN));
-+ }
-+
-+ /* Clean up queue if present */
-+ if (mrq) {
-+ if (!mci_cmd_is_complete(host))
-+ mrq->cmd->error = -ETIMEDOUT;
-+ if (mrq->data && !mci_data_is_complete(host)
-+ && !mci_data_error_is_complete(host)) {
-+ dma_stop_request(host->dma.req.req.dmac,
-+ host->dma.req.req.channel);
-+ host->data->error = -ETIMEDOUT;
-+ atmci_data_complete(host, data);
-+ }
-+ if (mrq->stop && !mci_stop_is_complete(host))
-+ mrq->stop->error = -ETIMEDOUT;
-+
-+ host->cmd = NULL;
-+ atmci_request_end(mmc, mrq);
-+ }
-+ mmc_detect_change(host->mmc, msecs_to_jiffies(100));
-+ }
-+}
-+
-+static void atmci_cmd_interrupt(struct mmc_host *mmc, u32 status)
-+{
-+ struct atmel_mci *host = mmc_priv(mmc);
-+ struct mmc_command *cmd = host->cmd;
-+
-+ /*
-+ * Read the response now so that we're free to send a new
-+ * command immediately.
-+ */
-+ cmd->resp[0] = mci_readl(host, RSPR);
-+ cmd->resp[1] = mci_readl(host, RSPR);
-+ cmd->resp[2] = mci_readl(host, RSPR);
-+ cmd->resp[3] = mci_readl(host, RSPR);
-+
-+ mci_writel(host, IDR, MCI_BIT(CMDRDY));
-+ host->cmd = NULL;
-+
-+ if (mci_stop_sent_is_complete(host)) {
-+ host->stop_status = status;
-+ mci_set_stop_pending(host);
-+ } else {
-+ if (host->mrq->stop && mci_dma_is_complete(host)
-+ && !mci_set_stop_sent_is_completed(host))
-+ send_stop_cmd(host->mmc, host->data, 0);
-+ host->cmd_status = status;
-+ mci_set_cmd_pending(host);
-+ }
-+
-+ tasklet_schedule(&host->tasklet);
-+}
-+
-+static void atmci_xfer_complete(struct dma_request *_req)
-+{
-+ struct dma_request_sg *req = to_dma_request_sg(_req);
-+ struct atmel_mci_dma *dma;
-+ struct atmel_mci *host;
-+ struct mmc_data *data;
-+
-+ dma = container_of(req, struct atmel_mci_dma, req);
-+ host = container_of(dma, struct atmel_mci, dma);
-+ data = host->data;
-+
-+ /*
-+ * This callback may be called before we see the CMDRDY
-+ * interrupt under heavy irq load (possibly caused by other
-+ * drivers) or when interrupts are disabled for a long time.
-+ */
-+ mci_set_dma_complete(host);
-+ if (data->stop && mci_cmd_is_complete(host)
-+ && !mci_set_stop_sent_is_completed(host))
-+ send_stop_cmd(host->mmc, data, 0);
-+
-+ /*
-+ * Regardless of what the documentation says, we have to wait
-+ * for NOTBUSY even after block read operations.
-+ *
-+ * When the DMA transfer is complete, the controller may still
-+ * be reading the CRC from the card, i.e. the data transfer is
-+ * still in progress and we haven't seen all the potential
-+ * error bits yet.
-+ */
-+ mci_writel(host, IER, MCI_BIT(NOTBUSY));
-+}
-+
-+static void atmci_dma_error(struct dma_request *_req)
-+{
-+ struct dma_request_sg *req = to_dma_request_sg(_req);
-+ struct atmel_mci_dma *dma;
-+ struct atmel_mci *host;
-+
-+ dma = container_of(req, struct atmel_mci_dma, req);
-+ host = container_of(dma, struct atmel_mci, dma);
-+
-+ mci_writel(host, IDR, (MCI_BIT(NOTBUSY)
-+ | MCI_DATA_ERROR_FLAGS));
-+
-+ mci_set_dma_error_pending(host);
-+ tasklet_schedule(&host->tasklet);
-+}
-+
-+static irqreturn_t atmci_interrupt(int irq, void *dev_id)
-+{
-+ struct mmc_host *mmc = dev_id;
-+ struct atmel_mci *host = mmc_priv(mmc);
-+ u32 status, mask, pending;
-+
-+ spin_lock(&mmc->lock);
-+
-+ status = mci_readl(host, SR);
-+ mask = mci_readl(host, IMR);
-+ pending = status & mask;
-+
-+ do {
-+ if (pending & MCI_DATA_ERROR_FLAGS) {
-+ mci_writel(host, IDR, (MCI_BIT(NOTBUSY)
-+ | MCI_DATA_ERROR_FLAGS));
-+ host->data_status = status;
-+ mci_set_data_error_pending(host);
-+ tasklet_schedule(&host->tasklet);
-+ break;
-+ }
-+ if (pending & MCI_BIT(CMDRDY))
-+ atmci_cmd_interrupt(mmc, status);
-+ if (pending & MCI_BIT(NOTBUSY)) {
-+ mci_writel(host, IDR, (MCI_BIT(NOTBUSY)
-+ | MCI_DATA_ERROR_FLAGS));
-+ mci_set_data_pending(host);
-+ tasklet_schedule(&host->tasklet);
-+ }
-+
-+ status = mci_readl(host, SR);
-+ mask = mci_readl(host, IMR);
-+ pending = status & mask;
-+ } while (pending);
-+
-+ spin_unlock(&mmc->lock);
-+
-+ return IRQ_HANDLED;
-+}
-+
-+static irqreturn_t atmci_detect_change(int irq, void *dev_id)
-+{
-+ struct mmc_host *mmc = dev_id;
-+ struct atmel_mci *host = mmc_priv(mmc);
-+
-+ int present = !gpio_get_value(irq_to_gpio(irq));
-+
-+ if (present != host->present) {
-+ dev_dbg(&mmc->class_dev, "card %s\n",
-+ present ? "inserted" : "removed");
-+ host->present = present;
-+ mci_set_card_detect_pending(host);
-+ tasklet_schedule(&host->tasklet);
-+ }
-+ return IRQ_HANDLED;
-+}
-+
-+static int __devinit atmci_probe(struct platform_device *pdev)
-+{
-+ struct mci_platform_data *board;
-+ struct atmel_mci *host;
-+ struct mmc_host *mmc;
-+ struct resource *regs;
-+ int irq;
-+ int ret;
-+
-+ regs = platform_get_resource(pdev, IORESOURCE_MEM, 0);
-+ if (!regs)
-+ return -ENXIO;
-+ irq = platform_get_irq(pdev, 0);
-+ if (irq < 0)
-+ return irq;
-+
-+ board = pdev->dev.platform_data;
-+
-+ mmc = mmc_alloc_host(sizeof(struct atmel_mci), &pdev->dev);
-+ if (!mmc)
-+ return -ENOMEM;
-+
-+ host = mmc_priv(mmc);
-+ host->pdev = pdev;
-+ host->mmc = mmc;
-+ if (board) {
-+ host->detect_pin = board->detect_pin;
-+ host->wp_pin = board->wp_pin;
-+ } else {
-+ host->detect_pin = -1;
-+ host->detect_pin = -1;
-+ }
-+
-+ host->mck = clk_get(&pdev->dev, "mci_clk");
-+ if (IS_ERR(host->mck)) {
-+ ret = PTR_ERR(host->mck);
-+ goto out_free_host;
-+ }
-+ clk_enable(host->mck);
-+
-+ ret = -ENOMEM;
-+ host->regs = ioremap(regs->start, regs->end - regs->start + 1);
-+ if (!host->regs)
-+ goto out_disable_clk;
-+
-+ host->bus_hz = clk_get_rate(host->mck);
-+ host->mapbase = regs->start;
-+
-+ mmc->ops = &atmci_ops;
-+ mmc->f_min = (host->bus_hz + 511) / 512;
-+ mmc->f_max = min((unsigned int)(host->bus_hz / 2), fmax);
-+ mmc->ocr_avail = MMC_VDD_32_33 | MMC_VDD_33_34;
-+ mmc->caps |= MMC_CAP_4_BIT_DATA;
-+
-+ tasklet_init(&host->tasklet, atmci_tasklet_func, (unsigned long)mmc);
-+
-+ ret = request_irq(irq, atmci_interrupt, 0, "mmci", mmc);
-+ if (ret)
-+ goto out_unmap;
-+
-+ /* Assume card is present if we don't have a detect pin */
-+ host->present = 1;
-+ if (host->detect_pin >= 0) {
-+ if (gpio_request(host->detect_pin, "mmc_detect")) {
-+ dev_dbg(&mmc->class_dev, "no detect pin available\n");
-+ host->detect_pin = -1;
-+ } else {
-+ host->present = !gpio_get_value(host->detect_pin);
-+ }
-+ }
-+ if (host->wp_pin >= 0) {
-+ if (gpio_request(host->wp_pin, "mmc_wp")) {
-+ dev_dbg(&mmc->class_dev, "no WP pin available\n");
-+ host->wp_pin = -1;
-+ }
-+ }
-+
-+ /* TODO: Get this information from platform data */
-+ ret = -ENOMEM;
-+ host->dma.req.req.dmac = find_dma_controller(0);
-+ if (!host->dma.req.req.dmac) {
-+ dev_dbg(&mmc->class_dev, "no DMA controller available\n");
-+ goto out_free_irq;
-+ }
-+ ret = dma_alloc_channel(host->dma.req.req.dmac);
-+ if (ret < 0) {
-+ dev_dbg(&mmc->class_dev, "unable to allocate DMA channel\n");
-+ goto out_free_irq;
-+ }
-+ host->dma.req.req.channel = ret;
-+ host->dma.req.width = DMA_WIDTH_32BIT;
-+ host->dma.req.req.xfer_complete = atmci_xfer_complete;
-+ host->dma.req.req.block_complete = NULL; // atmci_block_complete;
-+ host->dma.req.req.error = atmci_dma_error;
-+ host->dma.rx_periph_id = 0;
-+ host->dma.tx_periph_id = 1;
-+
-+ mci_writel(host, CR, MCI_BIT(SWRST));
-+ mci_writel(host, IDR, ~0UL);
-+
-+ platform_set_drvdata(pdev, host);
-+
-+ mmc_add_host(mmc);
-+
-+ if (host->detect_pin >= 0) {
-+ ret = request_irq(gpio_to_irq(host->detect_pin),
-+ atmci_detect_change,
-+ IRQF_TRIGGER_FALLING | IRQF_TRIGGER_RISING,
-+ DRIVER_NAME, mmc);
-+ if (ret) {
-+ dev_dbg(&mmc->class_dev,
-+ "could not request IRQ %d for detect pin\n",
-+ gpio_to_irq(host->detect_pin));
-+ gpio_free(host->detect_pin);
-+ host->detect_pin = -1;
-+ }
-+ }
-+
-+ dev_info(&mmc->class_dev, "Atmel MCI controller at 0x%08lx irq %d\n",
-+ host->mapbase, irq);
-+
-+ atmci_init_debugfs(host);
-+
-+ return 0;
-+
-+out_free_irq:
-+ if (host->detect_pin >= 0)
-+ gpio_free(host->detect_pin);
-+ if (host->wp_pin >= 0)
-+ gpio_free(host->wp_pin);
-+ free_irq(irq, mmc);
-+out_unmap:
-+ iounmap(host->regs);
-+out_disable_clk:
-+ clk_disable(host->mck);
-+ clk_put(host->mck);
-+out_free_host:
-+ mmc_free_host(mmc);
-+ return ret;
-+}
-+
-+static int __devexit atmci_remove(struct platform_device *pdev)
-+{
-+ struct atmel_mci *host = platform_get_drvdata(pdev);
-+
-+ platform_set_drvdata(pdev, NULL);
-+
-+ if (host) {
-+ atmci_cleanup_debugfs(host);
-+
-+ if (host->detect_pin >= 0) {
-+ free_irq(gpio_to_irq(host->detect_pin), host->mmc);
-+ cancel_delayed_work(&host->mmc->detect);
-+ gpio_free(host->detect_pin);
-+ }
-+
-+ mmc_remove_host(host->mmc);
-+
-+ mci_writel(host, IDR, ~0UL);
-+ mci_writel(host, CR, MCI_BIT(MCIDIS));
-+ mci_readl(host, SR);
-+
-+ dma_release_channel(host->dma.req.req.dmac,
-+ host->dma.req.req.channel);
-+
-+ if (host->wp_pin >= 0)
-+ gpio_free(host->wp_pin);
-+
-+ free_irq(platform_get_irq(pdev, 0), host->mmc);
-+ iounmap(host->regs);
-+
-+ clk_disable(host->mck);
-+ clk_put(host->mck);
-+
-+ mmc_free_host(host->mmc);
-+ }
-+ return 0;
-+}
-+
-+static struct platform_driver atmci_driver = {
-+ .probe = atmci_probe,
-+ .remove = __devexit_p(atmci_remove),
-+ .driver = {
-+ .name = DRIVER_NAME,
-+ },
-+};
-+
-+static int __init atmci_init(void)
-+{
-+ return platform_driver_register(&atmci_driver);
-+}
-+
-+static void __exit atmci_exit(void)
-+{
-+ platform_driver_unregister(&atmci_driver);
-+}
-+
-+module_init(atmci_init);
-+module_exit(atmci_exit);
-+
-+MODULE_DESCRIPTION("Atmel Multimedia Card Interface driver");
-+MODULE_LICENSE("GPL");
-diff -Nrup linux-2.6.24/drivers/mmc/host/atmel-mci.h linux-avr32/drivers/mmc/host/atmel-mci.h
---- linux-2.6.24/drivers/mmc/host/atmel-mci.h 1969-12-31 19:00:00.000000000 -0500
-+++ linux-avr32/drivers/mmc/host/atmel-mci.h 2008-02-01 14:51:39.000000000 -0500
-@@ -0,0 +1,192 @@
-+/*
-+ * Atmel MultiMedia Card Interface driver
-+ *
-+ * Copyright (C) 2004-2006 Atmel Corporation
-+ *
-+ * This program is free software; you can redistribute it and/or modify
-+ * it under the terms of the GNU General Public License version 2 as
-+ * published by the Free Software Foundation.
-+ */
-+#ifndef __DRIVERS_MMC_ATMEL_MCI_H__
-+#define __DRIVERS_MMC_ATMEL_MCI_H__
-+
-+/* MCI register offsets */
-+#define MCI_CR 0x0000
-+#define MCI_MR 0x0004
-+#define MCI_DTOR 0x0008
-+#define MCI_SDCR 0x000c
-+#define MCI_ARGR 0x0010
-+#define MCI_CMDR 0x0014
-+#define MCI_BLKR 0x0018
-+#define MCI_RSPR 0x0020
-+#define MCI_RSPR1 0x0024
-+#define MCI_RSPR2 0x0028
-+#define MCI_RSPR3 0x002c
-+#define MCI_RDR 0x0030
-+#define MCI_TDR 0x0034
-+#define MCI_SR 0x0040
-+#define MCI_IER 0x0044
-+#define MCI_IDR 0x0048
-+#define MCI_IMR 0x004c
-+
-+/* Bitfields in CR */
-+#define MCI_MCIEN_OFFSET 0
-+#define MCI_MCIEN_SIZE 1
-+#define MCI_MCIDIS_OFFSET 1
-+#define MCI_MCIDIS_SIZE 1
-+#define MCI_PWSEN_OFFSET 2
-+#define MCI_PWSEN_SIZE 1
-+#define MCI_PWSDIS_OFFSET 3
-+#define MCI_PWSDIS_SIZE 1
-+#define MCI_SWRST_OFFSET 7
-+#define MCI_SWRST_SIZE 1
-+
-+/* Bitfields in MR */
-+#define MCI_CLKDIV_OFFSET 0
-+#define MCI_CLKDIV_SIZE 8
-+#define MCI_PWSDIV_OFFSET 8
-+#define MCI_PWSDIV_SIZE 3
-+#define MCI_RDPROOF_OFFSET 11
-+#define MCI_RDPROOF_SIZE 1
-+#define MCI_WRPROOF_OFFSET 12
-+#define MCI_WRPROOF_SIZE 1
-+#define MCI_DMAPADV_OFFSET 14
-+#define MCI_DMAPADV_SIZE 1
-+#define MCI_BLKLEN_OFFSET 16
-+#define MCI_BLKLEN_SIZE 16
-+
-+/* Bitfields in DTOR */
-+#define MCI_DTOCYC_OFFSET 0
-+#define MCI_DTOCYC_SIZE 4
-+#define MCI_DTOMUL_OFFSET 4
-+#define MCI_DTOMUL_SIZE 3
-+
-+/* Bitfields in SDCR */
-+#define MCI_SDCSEL_OFFSET 0
-+#define MCI_SDCSEL_SIZE 4
-+#define MCI_SDCBUS_OFFSET 7
-+#define MCI_SDCBUS_SIZE 1
-+
-+/* Bitfields in ARGR */
-+#define MCI_ARG_OFFSET 0
-+#define MCI_ARG_SIZE 32
-+
-+/* Bitfields in CMDR */
-+#define MCI_CMDNB_OFFSET 0
-+#define MCI_CMDNB_SIZE 6
-+#define MCI_RSPTYP_OFFSET 6
-+#define MCI_RSPTYP_SIZE 2
-+#define MCI_SPCMD_OFFSET 8
-+#define MCI_SPCMD_SIZE 3
-+#define MCI_OPDCMD_OFFSET 11
-+#define MCI_OPDCMD_SIZE 1
-+#define MCI_MAXLAT_OFFSET 12
-+#define MCI_MAXLAT_SIZE 1
-+#define MCI_TRCMD_OFFSET 16
-+#define MCI_TRCMD_SIZE 2
-+#define MCI_TRDIR_OFFSET 18
-+#define MCI_TRDIR_SIZE 1
-+#define MCI_TRTYP_OFFSET 19
-+#define MCI_TRTYP_SIZE 2
-+
-+/* Bitfields in BLKR */
-+#define MCI_BCNT_OFFSET 0
-+#define MCI_BCNT_SIZE 16
-+
-+/* Bitfields in RSPRn */
-+#define MCI_RSP_OFFSET 0
-+#define MCI_RSP_SIZE 32
-+
-+/* Bitfields in SR/IER/IDR/IMR */
-+#define MCI_CMDRDY_OFFSET 0
-+#define MCI_CMDRDY_SIZE 1
-+#define MCI_RXRDY_OFFSET 1
-+#define MCI_RXRDY_SIZE 1
-+#define MCI_TXRDY_OFFSET 2
-+#define MCI_TXRDY_SIZE 1
-+#define MCI_BLKE_OFFSET 3
-+#define MCI_BLKE_SIZE 1
-+#define MCI_DTIP_OFFSET 4
-+#define MCI_DTIP_SIZE 1
-+#define MCI_NOTBUSY_OFFSET 5
-+#define MCI_NOTBUSY_SIZE 1
-+#define MCI_ENDRX_OFFSET 6
-+#define MCI_ENDRX_SIZE 1
-+#define MCI_ENDTX_OFFSET 7
-+#define MCI_ENDTX_SIZE 1
-+#define MCI_RXBUFF_OFFSET 14
-+#define MCI_RXBUFF_SIZE 1
-+#define MCI_TXBUFE_OFFSET 15
-+#define MCI_TXBUFE_SIZE 1
-+#define MCI_RINDE_OFFSET 16
-+#define MCI_RINDE_SIZE 1
-+#define MCI_RDIRE_OFFSET 17
-+#define MCI_RDIRE_SIZE 1
-+#define MCI_RCRCE_OFFSET 18
-+#define MCI_RCRCE_SIZE 1
-+#define MCI_RENDE_OFFSET 19
-+#define MCI_RENDE_SIZE 1
-+#define MCI_RTOE_OFFSET 20
-+#define MCI_RTOE_SIZE 1
-+#define MCI_DCRCE_OFFSET 21
-+#define MCI_DCRCE_SIZE 1
-+#define MCI_DTOE_OFFSET 22
-+#define MCI_DTOE_SIZE 1
-+#define MCI_OVRE_OFFSET 30
-+#define MCI_OVRE_SIZE 1
-+#define MCI_UNRE_OFFSET 31
-+#define MCI_UNRE_SIZE 1
-+
-+/* Constants for DTOMUL */
-+#define MCI_DTOMUL_1_CYCLE 0
-+#define MCI_DTOMUL_16_CYCLES 1
-+#define MCI_DTOMUL_128_CYCLES 2
-+#define MCI_DTOMUL_256_CYCLES 3
-+#define MCI_DTOMUL_1024_CYCLES 4
-+#define MCI_DTOMUL_4096_CYCLES 5
-+#define MCI_DTOMUL_65536_CYCLES 6
-+#define MCI_DTOMUL_1048576_CYCLES 7
-+
-+/* Constants for RSPTYP */
-+#define MCI_RSPTYP_NO_RESP 0
-+#define MCI_RSPTYP_48_BIT 1
-+#define MCI_RSPTYP_136_BIT 2
-+
-+/* Constants for SPCMD */
-+#define MCI_SPCMD_NO_SPEC_CMD 0
-+#define MCI_SPCMD_INIT_CMD 1
-+#define MCI_SPCMD_SYNC_CMD 2
-+#define MCI_SPCMD_INT_CMD 4
-+#define MCI_SPCMD_INT_RESP 5
-+
-+/* Constants for TRCMD */
-+#define MCI_TRCMD_NO_TRANS 0
-+#define MCI_TRCMD_START_TRANS 1
-+#define MCI_TRCMD_STOP_TRANS 2
-+
-+/* Constants for TRTYP */
-+#define MCI_TRTYP_BLOCK 0
-+#define MCI_TRTYP_MULTI_BLOCK 1
-+#define MCI_TRTYP_STREAM 2
-+
-+/* Bit manipulation macros */
-+#define MCI_BIT(name) \
-+ (1 << MCI_##name##_OFFSET)
-+#define MCI_BF(name,value) \
-+ (((value) & ((1 << MCI_##name##_SIZE) - 1)) \
-+ << MCI_##name##_OFFSET)
-+#define MCI_BFEXT(name,value) \
-+ (((value) >> MCI_##name##_OFFSET) \
-+ & ((1 << MCI_##name##_SIZE) - 1))
-+#define MCI_BFINS(name,value,old) \
-+ (((old) & ~(((1 << MCI_##name##_SIZE) - 1) \
-+ << MCI_##name##_OFFSET)) \
-+ | MCI_BF(name,value))
-+
-+/* Register access macros */
-+#define mci_readl(port,reg) \
-+ __raw_readl((port)->regs + MCI_##reg)
-+#define mci_writel(port,reg,value) \
-+ __raw_writel((value), (port)->regs + MCI_##reg)
-+
-+#endif /* __DRIVERS_MMC_ATMEL_MCI_H__ */
-diff -Nrup linux-2.6.24/drivers/mmc/host/Kconfig linux-avr32/drivers/mmc/host/Kconfig
---- linux-2.6.24/drivers/mmc/host/Kconfig 2008-01-24 17:58:37.000000000 -0500
-+++ linux-avr32/drivers/mmc/host/Kconfig 2008-02-01 14:51:39.000000000 -0500
-@@ -91,6 +91,16 @@ config MMC_AT91
-
- If unsure, say N.
-
-+config MMC_ATMELMCI
-+ tristate "Atmel Multimedia Card Interface support"
-+ depends on AVR32 && MMC
-+ help
-+ This selects the Atmel Multimedia Card Interface. If you have
-+ a AT91 (ARM) or AT32 (AVR32) platform with a Multimedia Card
-+ slot, say Y or M here.
-+
-+ If unsure, say N.
-+
- config MMC_IMX
- tristate "Motorola i.MX Multimedia Card Interface support"
- depends on ARCH_IMX
-diff -Nrup linux-2.6.24/drivers/mmc/host/Makefile linux-avr32/drivers/mmc/host/Makefile
---- linux-2.6.24/drivers/mmc/host/Makefile 2008-01-24 17:58:37.000000000 -0500
-+++ linux-avr32/drivers/mmc/host/Makefile 2008-02-01 14:51:39.000000000 -0500
-@@ -15,6 +15,7 @@ obj-$(CONFIG_MMC_WBSD) += wbsd.o
- obj-$(CONFIG_MMC_AU1X) += au1xmmc.o
- obj-$(CONFIG_MMC_OMAP) += omap.o
- obj-$(CONFIG_MMC_AT91) += at91_mci.o
-+obj-$(CONFIG_MMC_ATMELMCI) += atmel-mci.o
- obj-$(CONFIG_MMC_TIFM_SD) += tifm_sd.o
- obj-$(CONFIG_MMC_SPI) += mmc_spi.o
-
-diff -Nrup linux-2.6.24/drivers/mtd/chips/cfi_cmdset_0001.c linux-avr32/drivers/mtd/chips/cfi_cmdset_0001.c
---- linux-2.6.24/drivers/mtd/chips/cfi_cmdset_0001.c 2008-01-24 17:58:37.000000000 -0500
-+++ linux-avr32/drivers/mtd/chips/cfi_cmdset_0001.c 2008-02-01 14:51:39.000000000 -0500
-@@ -50,6 +50,7 @@
- #define I82802AC 0x00ac
- #define MANUFACTURER_ST 0x0020
- #define M50LPW080 0x002F
-+#define AT49BV640D 0x02de
-
- static int cfi_intelext_read (struct mtd_info *, loff_t, size_t, size_t *, u_char *);
- static int cfi_intelext_write_words(struct mtd_info *, loff_t, size_t, size_t *, const u_char *);
-@@ -157,6 +158,47 @@ static void cfi_tell_features(struct cfi
- }
- #endif
-
-+/* Atmel chips don't use the same PRI format as Intel chips */
-+static void fixup_convert_atmel_pri(struct mtd_info *mtd, void *param)
-+{
-+ struct map_info *map = mtd->priv;
-+ struct cfi_private *cfi = map->fldrv_priv;
-+ struct cfi_pri_intelext *extp = cfi->cmdset_priv;
-+ struct cfi_pri_atmel atmel_pri;
-+ uint32_t features = 0;
-+
-+ /* Reverse byteswapping */
-+ extp->FeatureSupport = cpu_to_le32(extp->FeatureSupport);
-+ extp->BlkStatusRegMask = cpu_to_le16(extp->BlkStatusRegMask);
-+ extp->ProtRegAddr = cpu_to_le16(extp->ProtRegAddr);
-+
-+ memcpy(&atmel_pri, extp, sizeof(atmel_pri));
-+ memset((char *)extp + 5, 0, sizeof(*extp) - 5);
-+
-+ printk(KERN_ERR "atmel Features: %02x\n", atmel_pri.Features);
-+
-+ if (atmel_pri.Features & 0x01) /* chip erase supported */
-+ features |= (1<<0);
-+ if (atmel_pri.Features & 0x02) /* erase suspend supported */
-+ features |= (1<<1);
-+ if (atmel_pri.Features & 0x04) /* program suspend supported */
-+ features |= (1<<2);
-+ if (atmel_pri.Features & 0x08) /* simultaneous operations supported */
-+ features |= (1<<9);
-+ if (atmel_pri.Features & 0x20) /* page mode read supported */
-+ features |= (1<<7);
-+ if (atmel_pri.Features & 0x40) /* queued erase supported */
-+ features |= (1<<4);
-+ if (atmel_pri.Features & 0x80) /* Protection bits supported */
-+ features |= (1<<6);
-+
-+ extp->FeatureSupport = features;
-+
-+ /* burst write mode not supported */
-+ cfi->cfiq->BufWriteTimeoutTyp = 0;
-+ cfi->cfiq->BufWriteTimeoutMax = 0;
-+}
-+
- #ifdef CMDSET0001_DISABLE_ERASE_SUSPEND_ON_WRITE
- /* Some Intel Strata Flash prior to FPO revision C has bugs in this area */
- static void fixup_intel_strataflash(struct mtd_info *mtd, void* param)
-@@ -234,6 +276,7 @@ static void fixup_use_powerup_lock(struc
- }
-
- static struct cfi_fixup cfi_fixup_table[] = {
-+ { CFI_MFR_ATMEL, CFI_ID_ANY, fixup_convert_atmel_pri, NULL },
- #ifdef CMDSET0001_DISABLE_ERASE_SUSPEND_ON_WRITE
- { CFI_MFR_ANY, CFI_ID_ANY, fixup_intel_strataflash, NULL },
- #endif
-diff -Nrup linux-2.6.24/drivers/mtd/chips/cfi_cmdset_0002.c linux-avr32/drivers/mtd/chips/cfi_cmdset_0002.c
---- linux-2.6.24/drivers/mtd/chips/cfi_cmdset_0002.c 2008-01-24 17:58:37.000000000 -0500
-+++ linux-avr32/drivers/mtd/chips/cfi_cmdset_0002.c 2008-02-01 14:51:39.000000000 -0500
-@@ -185,6 +185,10 @@ static void fixup_convert_atmel_pri(stru
- extp->TopBottom = 2;
- else
- extp->TopBottom = 3;
-+
-+ /* burst write mode not supported */
-+ cfi->cfiq->BufWriteTimeoutTyp = 0;
-+ cfi->cfiq->BufWriteTimeoutMax = 0;
- }
-
- static void fixup_use_secsi(struct mtd_info *mtd, void *param)
-@@ -217,6 +221,7 @@ static void fixup_use_atmel_lock(struct
- }
-
- static struct cfi_fixup cfi_fixup_table[] = {
-+ { CFI_MFR_ATMEL, CFI_ID_ANY, fixup_convert_atmel_pri, NULL },
- #ifdef AMD_BOOTLOC_BUG
- { CFI_MFR_AMD, CFI_ID_ANY, fixup_amd_bootblock, NULL },
- #endif
-@@ -229,7 +234,6 @@ static struct cfi_fixup cfi_fixup_table[
- #if !FORCE_WORD_WRITE
- { CFI_MFR_ANY, CFI_ID_ANY, fixup_use_write_buffers, NULL, },
- #endif
-- { CFI_MFR_ATMEL, CFI_ID_ANY, fixup_convert_atmel_pri, NULL },
- { 0, 0, NULL, NULL }
- };
- static struct cfi_fixup jedec_fixup_table[] = {
-diff -Nrup linux-2.6.24/drivers/pcmcia/at32_cf.c linux-avr32/drivers/pcmcia/at32_cf.c
---- linux-2.6.24/drivers/pcmcia/at32_cf.c 1969-12-31 19:00:00.000000000 -0500
-+++ linux-avr32/drivers/pcmcia/at32_cf.c 2008-02-01 14:51:42.000000000 -0500
-@@ -0,0 +1,533 @@
-+/*
-+ * Driver for AVR32 Static Memory Controller: CompactFlash support
-+ *
-+ * Copyright (C) 2006 Atmel Norway
-+ *
-+ * This program is free software; you can redistribute it and/or
-+ * modify it under the terms of the GNU General Public License as
-+ * published by the Free Software Foundation; either version 2 of the
-+ * License, or (at your option) any later version.
-+ *
-+ * This program is distributed in the hope that it will be useful, but
-+ * WITHOUT ANY WARRANTY; without even the implied warranty of
-+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
-+ * General Public License for more details.
-+ *
-+ * You should have received a copy of the GNU General Public License
-+ * along with this program; if not, write to the Free Software
-+ * Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA
-+ * 02111-1307, USA.
-+ *
-+ * The full GNU General Public License is included in this
-+ * distribution in the file called COPYING.
-+ */
-+#include <linux/module.h>
-+#include <linux/kernel.h>
-+#include <linux/platform_device.h>
-+#include <linux/init.h>
-+#include <linux/device.h>
-+#include <linux/delay.h>
-+#include <linux/interrupt.h>
-+#include <linux/err.h>
-+#include <linux/clk.h>
-+#include <linux/dma-mapping.h>
-+
-+#include <pcmcia/ss.h>
-+
-+#include <asm/gpio.h>
-+#include <asm/io.h>
-+#include <asm/arch/board.h>
-+
-+#include <asm/arch/smc.h>
-+
-+struct at32_cf_socket {
-+ struct pcmcia_socket socket;
-+ int detect_pin;
-+ int reset_pin;
-+ int vcc_pin;
-+ int ready_pin;
-+ struct resource res_attr;
-+ struct resource res_mem;
-+ struct resource res_io;
-+ struct smc_config smc;
-+ unsigned int irq;
-+ unsigned int cf_cs;
-+ socket_state_t state;
-+ unsigned present:1;
-+};
-+#define to_at32_cf(sock) container_of(sock, struct at32_cf_socket, socket)
-+
-+/*
-+ * We have the following memory layout relative to the base address:
-+ *
-+ * Alt IDE Mode: 00e0 0000 -> 00ff ffff
-+ * True IDE Mode: 00c0 0000 -> 00df ffff
-+ * I/O memory: 0080 0000 -> 00bf ffff
-+ * Common memory: 0040 0000 -> 007f ffff
-+ * Attribute memory: 0000 0000 -> 003f ffff
-+ */
-+#define CF_ATTR_OFFSET 0x00000000
-+#define CF_MEM_OFFSET 0x00400000
-+#define CF_IO_OFFSET 0x00800000
-+#define CF_RES_SIZE 4096
-+
-+#ifdef DEBUG
-+
-+static int pc_debug;
-+module_param(pc_debug, int, 0644);
-+
-+static void at32_cf_debug(struct at32_cf_socket *cf, const char *func,
-+ int level, const char *fmt, ...)
-+{
-+ va_list args;
-+
-+ if (pc_debug > level) {
-+ printk(KERN_DEBUG "at32_cf/%u: %s: ", cf->cf_cs, func);
-+ va_start(args, fmt);
-+ vprintk(fmt, args);
-+ va_end(args);
-+ }
-+}
-+
-+#define debug(cf, lvl, fmt, arg...) \
-+ at32_cf_debug(cf, __func__, lvl, fmt, ##arg)
-+
-+#else
-+#define debug(cf, lvl, fmt, arg...) do { } while (0)
-+#endif
-+
-+static inline int at32_cf_present(struct at32_cf_socket *cf)
-+{
-+ int present = 1;
-+
-+ /* If we don't have a detect pin, assume the card is present */
-+ if (cf->detect_pin >= 0)
-+ present = !gpio_get_value(cf->detect_pin);
-+
-+ return present;
-+}
-+
-+static irqreturn_t at32_cf_irq(int irq, void *dev_id)
-+{
-+ struct at32_cf_socket *cf = dev_id;
-+ unsigned int present;
-+
-+ present = at32_cf_present(cf);
-+ if (present != cf->present) {
-+ cf->present = present;
-+ debug(cf, 3, "card %s\n", present ? "present" : "gone");
-+ pcmcia_parse_events(&cf->socket, SS_DETECT);
-+ }
-+
-+ return IRQ_HANDLED;
-+}
-+
-+static int at32_cf_get_status(struct pcmcia_socket *sock, u_int *value)
-+{
-+ struct at32_cf_socket *cf;
-+ u_int status = 0;
-+
-+ cf = container_of(sock, struct at32_cf_socket, socket);
-+
-+ if (at32_cf_present(cf)) {
-+ /* NOTE: gpio on AP7xxx is 3.3V */
-+ status = SS_DETECT | SS_3VCARD;
-+ if (cf->ready_pin < 0 || gpio_get_value(cf->ready_pin))
-+ status |= SS_READY;
-+ if (cf->vcc_pin < 0 || gpio_get_value(cf->vcc_pin))
-+ status |= SS_POWERON;
-+ }
-+
-+ *value = status;
-+ return 0;
-+}
-+
-+static int at32_cf_set_socket(struct pcmcia_socket *sock, socket_state_t *state)
-+{
-+ struct at32_cf_socket *cf = container_of(sock, struct at32_cf_socket, socket);
-+
-+ debug(cf, 2, "mask: %s%s%s%s%s%sflags: %s%s%s%s%s%sVcc %d Vpp %d irq %d\n",
-+ (state->csc_mask==0)?"<NONE> ":"",
-+ (state->csc_mask&SS_DETECT)?"DETECT ":"",
-+ (state->csc_mask&SS_READY)?"READY ":"",
-+ (state->csc_mask&SS_BATDEAD)?"BATDEAD ":"",
-+ (state->csc_mask&SS_BATWARN)?"BATWARN ":"",
-+ (state->csc_mask&SS_STSCHG)?"STSCHG ":"",
-+ (state->flags==0)?"<NONE> ":"",
-+ (state->flags&SS_PWR_AUTO)?"PWR_AUTO ":"",
-+ (state->flags&SS_IOCARD)?"IOCARD ":"",
-+ (state->flags&SS_RESET)?"RESET ":"",
-+ (state->flags&SS_SPKR_ENA)?"SPKR_ENA ":"",
-+ (state->flags&SS_OUTPUT_ENA)?"OUTPUT_ENA ":"",
-+ state->Vcc, state->Vpp, state->io_irq);
-+
-+ /*
-+ * TODO: Allow boards to override this in case they have level
-+ * converters.
-+ */
-+ switch (state->Vcc) {
-+ case 0:
-+ if (cf->vcc_pin >= 0)
-+ gpio_set_value(cf->vcc_pin, 0);
-+ break;
-+ case 33:
-+ if (cf->vcc_pin >= 0)
-+ gpio_set_value(cf->vcc_pin, 1);
-+ break;
-+ default:
-+ return -EINVAL;
-+ }
-+
-+ if (cf->reset_pin >= 0)
-+ gpio_set_value(cf->reset_pin, state->flags & SS_RESET);
-+
-+ cf->state = *state;
-+
-+ return 0;
-+}
-+
-+static int at32_cf_socket_init(struct pcmcia_socket *sock)
-+{
-+ debug(to_at32_cf(sock), 2, "called\n");
-+
-+ return 0;
-+}
-+
-+static int at32_cf_suspend(struct pcmcia_socket *sock)
-+{
-+ debug(to_at32_cf(sock), 2, "called\n");
-+
-+ at32_cf_set_socket(sock, &dead_socket);
-+
-+ return 0;
-+}
-+
-+static int at32_cf_set_io_map(struct pcmcia_socket *sock,
-+ struct pccard_io_map *map)
-+{
-+ struct at32_cf_socket *cf = container_of(sock, struct at32_cf_socket, socket);
-+ int retval;
-+
-+ debug(cf, 2, "map %u speed %u start 0x%08x stop 0x%08x\n",
-+ map->map, map->speed, map->start, map->stop);
-+ debug(cf, 2, "flags: %s%s%s%s%s%s%s%s\n",
-+ (map->flags == 0) ? "<NONE>":"",
-+ (map->flags & MAP_ACTIVE) ? "ACTIVE " : "",
-+ (map->flags & MAP_16BIT) ? "16BIT " : "",
-+ (map->flags & MAP_AUTOSZ) ? "AUTOSZ " : "",
-+ (map->flags & MAP_0WS) ? "0WS " : "",
-+ (map->flags & MAP_WRPROT) ? "WRPROT " : "",
-+ (map->flags & MAP_USE_WAIT) ? "USE_WAIT " : "",
-+ (map->flags & MAP_PREFETCH) ? "PREFETCH " : "");
-+
-+ map->flags &= MAP_ACTIVE | MAP_16BIT | MAP_USE_WAIT;
-+
-+ if (map->flags & MAP_16BIT)
-+ cf->smc.bus_width = 2;
-+ else
-+ cf->smc.bus_width = 1;
-+
-+ if (map->flags & MAP_USE_WAIT)
-+ cf->smc.nwait_mode = 3;
-+ else
-+ cf->smc.nwait_mode = 0;
-+
-+ retval = smc_set_configuration(cf->cf_cs, &cf->smc);
-+ if (retval) {
-+ printk(KERN_ERR "at32_cf: could not set up SMC for I/O\n");
-+ return retval;
-+ }
-+
-+ map->start = cf->socket.io_offset;
-+ map->stop = map->start + CF_RES_SIZE - 1;
-+
-+ return 0;
-+}
-+
-+static int
-+at32_cf_set_mem_map(struct pcmcia_socket *sock, struct pccard_mem_map *map)
-+{
-+ struct at32_cf_socket *cf;
-+ struct resource *res;
-+ int retval;
-+
-+ cf = container_of(sock, struct at32_cf_socket, socket);
-+
-+ debug(cf, 2, "map %u speed %u card_start %08x\n",
-+ map->map, map->speed, map->card_start);
-+ debug(cf, 2, "flags: %s%s%s%s%s%s%s%s\n",
-+ (map->flags==0)?"<NONE>":"",
-+ (map->flags&MAP_ACTIVE)?"ACTIVE ":"",
-+ (map->flags&MAP_16BIT)?"16BIT ":"",
-+ (map->flags&MAP_AUTOSZ)?"AUTOSZ ":"",
-+ (map->flags&MAP_0WS)?"0WS ":"",
-+ (map->flags&MAP_WRPROT)?"WRPROT ":"",
-+ (map->flags&MAP_ATTRIB)?"ATTRIB ":"",
-+ (map->flags&MAP_USE_WAIT)?"USE_WAIT ":"");
-+
-+ if (map->card_start)
-+ return -EINVAL;
-+
-+ map->flags &= MAP_ACTIVE | MAP_ATTRIB | MAP_16BIT | MAP_USE_WAIT;
-+
-+ if (map->flags & MAP_ATTRIB) {
-+ res = &cf->res_attr;
-+
-+ /* Linksys WCF12 seems to use WAIT when reading CIS */
-+ map->flags |= MAP_USE_WAIT;
-+ } else {
-+ res = &cf->res_mem;
-+ }
-+
-+ if (map->flags & MAP_USE_WAIT)
-+ cf->smc.nwait_mode = 3;
-+ else
-+ cf->smc.nwait_mode = 0;
-+
-+ retval = smc_set_configuration(cf->cf_cs, &cf->smc);
-+ if (retval) {
-+ printk(KERN_ERR "at32_cf: could not set up SMC for mem\n");
-+ return retval;
-+ }
-+
-+ map->static_start = res->start;
-+
-+ return 0;
-+}
-+
-+static struct pccard_operations at32_cf_ops = {
-+ .init = at32_cf_socket_init,
-+ .suspend = at32_cf_suspend,
-+ .get_status = at32_cf_get_status,
-+ .set_socket = at32_cf_set_socket,
-+ .set_io_map = at32_cf_set_io_map,
-+ .set_mem_map = at32_cf_set_mem_map,
-+};
-+
-+static int __init request_pin(struct platform_device *pdev,
-+ unsigned int pin, const char *name)
-+{
-+ if (gpio_request(pin, name)) {
-+ dev_warn(&pdev->dev, "failed to request %s pin\n", name);
-+ return -1;
-+ }
-+
-+ return pin;
-+}
-+
-+static struct smc_timing at32_cf_timing __initdata = {
-+ .ncs_read_setup = 30,
-+ .nrd_setup = 100,
-+ .ncs_write_setup = 30,
-+ .nwe_setup = 100,
-+
-+ .ncs_read_pulse = 360,
-+ .nrd_pulse = 290,
-+ .ncs_write_pulse = 360,
-+ .nwe_pulse = 290,
-+
-+ .read_cycle = 420,
-+ .write_cycle = 420,
-+};
-+
-+static int __init at32_cf_probe(struct platform_device *pdev)
-+{
-+ struct at32_cf_socket *cf;
-+ struct cf_platform_data *board = pdev->dev.platform_data;
-+ struct resource *res_skt;
-+ int irq;
-+ int ret;
-+
-+ dev_dbg(&pdev->dev, "probe");
-+
-+ if (!board)
-+ return -ENXIO;
-+
-+ res_skt = platform_get_resource(pdev, IORESOURCE_MEM, 0);
-+ if (!res_skt)
-+ return -ENXIO;
-+
-+ irq = platform_get_irq(pdev, 0);
-+ if (irq < 0)
-+ return irq;
-+
-+ cf = kzalloc(sizeof(struct at32_cf_socket), GFP_KERNEL);
-+ if (!cf)
-+ return -ENOMEM;
-+
-+ cf->detect_pin = -1;
-+ cf->reset_pin = -1;
-+ cf->vcc_pin = -1;
-+ cf->ready_pin = -1;
-+ cf->cf_cs = board->cs;
-+
-+ if (board->detect_pin != GPIO_PIN_NONE)
-+ cf->detect_pin = request_pin(pdev, board->detect_pin,
-+ "cf_detect");
-+ if (board->reset_pin != GPIO_PIN_NONE)
-+ cf->reset_pin = request_pin(pdev, board->reset_pin,
-+ "cf_reset");
-+ if (board->vcc_pin != GPIO_PIN_NONE)
-+ cf->vcc_pin = request_pin(pdev, board->vcc_pin,
-+ "cf_vcc");
-+ if (board->ready_pin != GPIO_PIN_NONE)
-+ /* READY is also used for irq through EIM */
-+ cf->ready_pin = board->ready_pin;
-+
-+ debug(cf, 2, "pins: detect=%d reset=%d vcc=%d\n",
-+ cf->detect_pin, cf->reset_pin, cf->vcc_pin);
-+
-+ cf->socket.pci_irq = irq;
-+ cf->socket.ops = &at32_cf_ops;
-+ cf->socket.resource_ops = &pccard_static_ops;
-+ cf->socket.dev.parent = &pdev->dev;
-+ cf->socket.owner = THIS_MODULE;
-+ cf->socket.features =
-+ SS_CAP_MEM_ALIGN | SS_CAP_STATIC_MAP | SS_CAP_PCCARD;
-+ cf->socket.map_size = CF_RES_SIZE;
-+
-+ cf->res_attr.start = res_skt->start + CF_ATTR_OFFSET;
-+ cf->res_attr.end = cf->res_attr.start + CF_RES_SIZE - 1;
-+ cf->res_attr.name = "attribute";
-+ cf->res_attr.flags = IORESOURCE_MEM;
-+ ret = request_resource(res_skt, &cf->res_attr);
-+ if (ret)
-+ goto err_request_res_attr;
-+
-+ cf->res_mem.start = res_skt->start + CF_MEM_OFFSET;
-+ cf->res_mem.end = cf->res_mem.start + CF_RES_SIZE - 1;
-+ cf->res_mem.name = "memory";
-+ cf->res_mem.flags = IORESOURCE_MEM;
-+ ret = request_resource(res_skt, &cf->res_mem);
-+ if (ret)
-+ goto err_request_res_mem;
-+
-+ cf->res_io.start = res_skt->start + CF_IO_OFFSET;
-+ cf->res_io.end = cf->res_io.start + CF_RES_SIZE - 1;
-+ cf->res_io.name = "io";
-+ cf->res_io.flags = IORESOURCE_MEM;
-+ ret = request_resource(res_skt, &cf->res_io);
-+ if (ret)
-+ goto err_request_res_io;
-+
-+ cf->socket.io_offset = cf->res_io.start;
-+
-+ if (cf->detect_pin >= 0) {
-+ ret = request_irq(gpio_to_irq(cf->detect_pin), at32_cf_irq,
-+ IRQF_SHARED, "cf_detect", cf);
-+ if (ret) {
-+ debug(cf, 1,
-+ "failed to request cf_detect interrupt\n");
-+ goto err_detect_irq;
-+ }
-+ }
-+
-+ cf->present = at32_cf_present(cf);
-+
-+ /* Setup SMC timings */
-+ smc_set_timing(&cf->smc, &at32_cf_timing);
-+
-+ cf->smc.bus_width = 2;
-+ cf->smc.nrd_controlled = 1;
-+ cf->smc.nwe_controlled = 1;
-+ cf->smc.nwait_mode = 0;
-+ cf->smc.byte_write = 0;
-+ cf->smc.tdf_cycles = 8;
-+ cf->smc.tdf_mode = 0;
-+
-+ ret = smc_set_configuration(cf->cf_cs, &cf->smc);
-+ if (ret) {
-+ debug(cf, 1, "failed to configure SMC\n", ret);
-+ goto err_smc;
-+ }
-+
-+ ret = pcmcia_register_socket(&cf->socket);
-+ if (ret) {
-+ debug(cf, 1, "failed to register socket: %d\n", ret);
-+ goto err_register_socket;
-+ }
-+
-+ if (cf->reset_pin >= 0)
-+ gpio_direction_output(cf->reset_pin, 0);
-+
-+ platform_set_drvdata(pdev, cf);
-+
-+ dev_info(&pdev->dev, "Atmel SMC CF interface at 0x%08lx\n",
-+ (unsigned long)res_skt->start);
-+
-+ return 0;
-+
-+err_register_socket:
-+err_smc:
-+ if (cf->detect_pin >= 0)
-+ free_irq(gpio_to_irq(cf->detect_pin), cf);
-+err_detect_irq:
-+ release_resource(&cf->res_io);
-+err_request_res_io:
-+ release_resource(&cf->res_mem);
-+err_request_res_mem:
-+ release_resource(&cf->res_attr);
-+err_request_res_attr:
-+ if (cf->vcc_pin >= 0)
-+ gpio_free(cf->vcc_pin);
-+ if (cf->reset_pin >= 0)
-+ gpio_free(cf->reset_pin);
-+ if (cf->detect_pin >= 0)
-+ gpio_free(cf->detect_pin);
-+ kfree(cf);
-+
-+ return ret;
-+}
-+
-+static int __exit at32_cf_remove(struct platform_device *pdev)
-+{
-+ struct at32_cf_socket *cf = platform_get_drvdata(pdev);
-+
-+ pcmcia_unregister_socket(&cf->socket);
-+ if (cf->detect_pin >= 0) {
-+ free_irq(gpio_to_irq(cf->detect_pin), cf);
-+ gpio_free(cf->detect_pin);
-+ }
-+ if (cf->vcc_pin >= 0)
-+ gpio_free(cf->vcc_pin);
-+ if (cf->reset_pin >= 0)
-+ gpio_free(cf->reset_pin);
-+
-+ release_resource(&cf->res_io);
-+ release_resource(&cf->res_mem);
-+ release_resource(&cf->res_attr);
-+ kfree(cf);
-+ platform_set_drvdata(pdev, NULL);
-+
-+ return 0;
-+}
-+
-+static struct platform_driver at32_cf_driver = {
-+ .remove = __exit_p(at32_cf_remove),
-+ .driver = {
-+ .name = "at32_cf",
-+ .owner = THIS_MODULE,
-+ },
-+};
-+
-+static int __init at32_cf_init(void)
-+{
-+ int ret;
-+
-+ ret = platform_driver_probe(&at32_cf_driver, at32_cf_probe);
-+ if (ret)
-+ printk(KERN_ERR "at32_cf: probe failed: %d\n", ret);
-+ return ret;
-+}
-+
-+static void __exit at32_cf_exit(void)
-+{
-+ platform_driver_unregister(&at32_cf_driver);
-+}
-+
-+module_init(at32_cf_init);
-+module_exit(at32_cf_exit);
-+
-+MODULE_LICENSE("GPL");
-+MODULE_DESCRIPTION("Driver for SMC PCMCIA interface");
-+MODULE_AUTHOR("Hans-Christian Egtvedt <hcegtvedt@atmel.com>");
-diff -Nrup linux-2.6.24/drivers/pcmcia/Kconfig linux-avr32/drivers/pcmcia/Kconfig
---- linux-2.6.24/drivers/pcmcia/Kconfig 2008-01-24 17:58:37.000000000 -0500
-+++ linux-avr32/drivers/pcmcia/Kconfig 2008-02-01 14:51:42.000000000 -0500
-@@ -276,6 +276,13 @@ config ELECTRA_CF
- Say Y here to support the CompactFlash controller on the
- PA Semi Electra eval board.
-
-+config AT32_CF
-+ tristate "AT32AP CompactFlash Controller"
-+ depends on PCMCIA && AVR32 && PLATFORM_AT32AP
-+ help
-+ Say Y here to support the CompactFlash controller on AT32 chips.
-+ Or choose M to compile the driver as a module named "at32_cf".
-+
- config PCCARD_NONSTATIC
- tristate
-
-diff -Nrup linux-2.6.24/drivers/pcmcia/Makefile linux-avr32/drivers/pcmcia/Makefile
---- linux-2.6.24/drivers/pcmcia/Makefile 2008-01-24 17:58:37.000000000 -0500
-+++ linux-avr32/drivers/pcmcia/Makefile 2008-02-01 14:51:42.000000000 -0500
-@@ -38,6 +38,7 @@ obj-$(CONFIG_PCMCIA_VRC4173) += vrc417
- obj-$(CONFIG_OMAP_CF) += omap_cf.o
- obj-$(CONFIG_AT91_CF) += at91_cf.o
- obj-$(CONFIG_ELECTRA_CF) += electra_cf.o
-+obj-$(CONFIG_AT32_CF) += at32_cf.o
-
- sa11xx_core-y += soc_common.o sa11xx_base.o
- pxa2xx_core-y += soc_common.o pxa2xx_base.o
-diff -Nrup linux-2.6.24/drivers/spi/atmel_spi.c linux-avr32/drivers/spi/atmel_spi.c
---- linux-2.6.24/drivers/spi/atmel_spi.c 2008-01-24 17:58:37.000000000 -0500
-+++ linux-avr32/drivers/spi/atmel_spi.c 2008-02-01 14:51:43.000000000 -0500
-@@ -51,7 +51,9 @@ struct atmel_spi {
- u8 stopping;
- struct list_head queue;
- struct spi_transfer *current_transfer;
-- unsigned long remaining_bytes;
-+ unsigned long current_remaining_bytes;
-+ struct spi_transfer *next_transfer;
-+ unsigned long next_remaining_bytes;
-
- void *buffer;
- dma_addr_t buffer_dma;
-@@ -121,6 +123,48 @@ static void cs_deactivate(struct atmel_s
- gpio_set_value(gpio, !active);
- }
-
-+static inline int atmel_spi_xfer_is_last(struct spi_message *msg,
-+ struct spi_transfer *xfer)
-+{
-+ return msg->transfers.prev == &xfer->transfer_list;
-+}
-+
-+static inline int atmel_spi_xfer_can_be_chained(struct spi_transfer *xfer)
-+{
-+ return xfer->delay_usecs == 0 && !xfer->cs_change;
-+}
-+
-+static void atmel_spi_next_xfer_data(struct spi_master *master,
-+ struct spi_transfer *xfer,
-+ dma_addr_t *tx_dma,
-+ dma_addr_t *rx_dma,
-+ u32 *plen)
-+{
-+ struct atmel_spi *as = spi_master_get_devdata(master);
-+ u32 len = *plen;
-+
-+ /* use scratch buffer only when rx or tx data is unspecified */
-+ if (xfer->rx_buf)
-+ *rx_dma = xfer->rx_dma + xfer->len - len;
-+ else {
-+ *rx_dma = as->buffer_dma;
-+ if (len > BUFFER_SIZE)
-+ len = BUFFER_SIZE;
-+ }
-+ if (xfer->tx_buf)
-+ *tx_dma = xfer->tx_dma + xfer->len - len;
-+ else {
-+ *tx_dma = as->buffer_dma;
-+ if (len > BUFFER_SIZE)
-+ len = BUFFER_SIZE;
-+ memset(as->buffer, 0, len);
-+ dma_sync_single_for_device(&as->pdev->dev,
-+ as->buffer_dma, len, DMA_TO_DEVICE);
-+ }
-+
-+ *plen = len;
-+}
-+
- /*
- * Submit next transfer for DMA.
- * lock is held, spi irq is blocked
-@@ -130,53 +174,78 @@ static void atmel_spi_next_xfer(struct s
- {
- struct atmel_spi *as = spi_master_get_devdata(master);
- struct spi_transfer *xfer;
-- u32 len;
-+ u32 len, remaining, total;
- dma_addr_t tx_dma, rx_dma;
-
-- xfer = as->current_transfer;
-- if (!xfer || as->remaining_bytes == 0) {
-- if (xfer)
-- xfer = list_entry(xfer->transfer_list.next,
-- struct spi_transfer, transfer_list);
-- else
-- xfer = list_entry(msg->transfers.next,
-- struct spi_transfer, transfer_list);
-- as->remaining_bytes = xfer->len;
-- as->current_transfer = xfer;
-+ if (!as->current_transfer)
-+ xfer = list_entry(msg->transfers.next,
-+ struct spi_transfer, transfer_list);
-+ else if (!as->next_transfer)
-+ xfer = list_entry(as->current_transfer->transfer_list.next,
-+ struct spi_transfer, transfer_list);
-+ else
-+ xfer = NULL;
-+
-+ if (xfer) {
-+ len = xfer->len;
-+ atmel_spi_next_xfer_data(master, xfer, &tx_dma, &rx_dma, &len);
-+ remaining = xfer->len - len;
-+
-+ spi_writel(as, RPR, rx_dma);
-+ spi_writel(as, TPR, tx_dma);
-+
-+ if (msg->spi->bits_per_word > 8)
-+ len >>= 1;
-+ spi_writel(as, RCR, len);
-+ spi_writel(as, TCR, len);
-+
-+ dev_dbg(&msg->spi->dev,
-+ " start xfer %p: len %u tx %p/%08x rx %p/%08x\n",
-+ xfer, xfer->len, xfer->tx_buf, xfer->tx_dma,
-+ xfer->rx_buf, xfer->rx_dma);
-+ } else {
-+ xfer = as->next_transfer;
-+ remaining = as->next_remaining_bytes;
- }
-
-- len = as->remaining_bytes;
-+ as->current_transfer = xfer;
-+ as->current_remaining_bytes = remaining;
-
-- tx_dma = xfer->tx_dma + xfer->len - len;
-- rx_dma = xfer->rx_dma + xfer->len - len;
-+ if (remaining > 0)
-+ len = remaining;
-+ else if (!atmel_spi_xfer_is_last(msg, xfer)
-+ && atmel_spi_xfer_can_be_chained(xfer)) {
-+ xfer = list_entry(xfer->transfer_list.next,
-+ struct spi_transfer, transfer_list);
-+ len = xfer->len;
-+ } else
-+ xfer = NULL;
-
-- /* use scratch buffer only when rx or tx data is unspecified */
-- if (!xfer->rx_buf) {
-- rx_dma = as->buffer_dma;
-- if (len > BUFFER_SIZE)
-- len = BUFFER_SIZE;
-- }
-- if (!xfer->tx_buf) {
-- tx_dma = as->buffer_dma;
-- if (len > BUFFER_SIZE)
-- len = BUFFER_SIZE;
-- memset(as->buffer, 0, len);
-- dma_sync_single_for_device(&as->pdev->dev,
-- as->buffer_dma, len, DMA_TO_DEVICE);
-- }
-+ as->next_transfer = xfer;
-
-- spi_writel(as, RPR, rx_dma);
-- spi_writel(as, TPR, tx_dma);
-+ if (xfer) {
-+ total = len;
-+ atmel_spi_next_xfer_data(master, xfer, &tx_dma, &rx_dma, &len);
-+ as->next_remaining_bytes = total - len;
-+
-+ spi_writel(as, RNPR, rx_dma);
-+ spi_writel(as, TNPR, tx_dma);
-+
-+ if (msg->spi->bits_per_word > 8)
-+ len >>= 1;
-+ spi_writel(as, RNCR, len);
-+ spi_writel(as, TNCR, len);
-+
-+ dev_dbg(&msg->spi->dev,
-+ " next xfer %p: len %u tx %p/%08x rx %p/%08x\n",
-+ xfer, xfer->len, xfer->tx_buf, xfer->tx_dma,
-+ xfer->rx_buf, xfer->rx_dma);
-+ } else {
-+ spi_writel(as, RNCR, 0);
-+ spi_writel(as, TNCR, 0);
-+ }
-
-- as->remaining_bytes -= len;
-- if (msg->spi->bits_per_word > 8)
-- len >>= 1;
--
-- /* REVISIT: when xfer->delay_usecs == 0, the PDC "next transfer"
-- * mechanism might help avoid the IRQ latency between transfers
-- * (and improve the nCS0 errata handling on at91rm9200 chips)
-- *
-- * We're also waiting for ENDRX before we start the next
-+ /* REVISIT: We're waiting for ENDRX before we start the next
- * transfer because we need to handle some difficult timing
- * issues otherwise. If we wait for ENDTX in one transfer and
- * then starts waiting for ENDRX in the next, it's difficult
-@@ -186,17 +255,7 @@ static void atmel_spi_next_xfer(struct s
- *
- * It should be doable, though. Just not now...
- */
-- spi_writel(as, TNCR, 0);
-- spi_writel(as, RNCR, 0);
- spi_writel(as, IER, SPI_BIT(ENDRX) | SPI_BIT(OVRES));
--
-- dev_dbg(&msg->spi->dev,
-- " start xfer %p: len %u tx %p/%08x rx %p/%08x imr %03x\n",
-- xfer, xfer->len, xfer->tx_buf, xfer->tx_dma,
-- xfer->rx_buf, xfer->rx_dma, spi_readl(as, IMR));
--
-- spi_writel(as, RCR, len);
-- spi_writel(as, TCR, len);
- spi_writel(as, PTCR, SPI_BIT(TXTEN) | SPI_BIT(RXTEN));
- }
-
-@@ -294,6 +353,7 @@ atmel_spi_msg_done(struct spi_master *ma
- spin_lock(&as->lock);
-
- as->current_transfer = NULL;
-+ as->next_transfer = NULL;
-
- /* continue if needed */
- if (list_empty(&as->queue) || as->stopping)
-@@ -377,7 +437,7 @@ atmel_spi_interrupt(int irq, void *dev_i
-
- spi_writel(as, IDR, pending);
-
-- if (as->remaining_bytes == 0) {
-+ if (as->current_remaining_bytes == 0) {
- msg->actual_length += xfer->len;
-
- if (!msg->is_dma_mapped)
-@@ -387,7 +447,7 @@ atmel_spi_interrupt(int irq, void *dev_i
- if (xfer->delay_usecs)
- udelay(xfer->delay_usecs);
-
-- if (msg->transfers.prev == &xfer->transfer_list) {
-+ if (atmel_spi_xfer_is_last(msg, xfer)) {
- /* report completed message */
- atmel_spi_msg_done(master, as, msg, 0,
- xfer->cs_change);
-@@ -490,9 +550,14 @@ static int atmel_spi_setup(struct spi_de
- if (!(spi->mode & SPI_CPHA))
- csr |= SPI_BIT(NCPHA);
-
-- /* TODO: DLYBS and DLYBCT */
-- csr |= SPI_BF(DLYBS, 10);
-- csr |= SPI_BF(DLYBCT, 10);
-+ /* DLYBS is mostly irrelevant since we manage chipselect using GPIOs.
-+ *
-+ * DLYBCT would add delays between words, slowing down transfers.
-+ * It could potentially be useful to cope with DMA bottlenecks, but
-+ * in those cases it's probably best to just use a lower bitrate.
-+ */
-+ csr |= SPI_BF(DLYBS, 0);
-+ csr |= SPI_BF(DLYBCT, 0);
-
- /* chipselect must have been muxed as GPIO (e.g. in board setup) */
- npcs_pin = (unsigned int)spi->controller_data;
-diff -Nrup linux-2.6.24/drivers/video/atmel_lcdfb.c linux-avr32/drivers/video/atmel_lcdfb.c
---- linux-2.6.24/drivers/video/atmel_lcdfb.c 2008-01-24 17:58:37.000000000 -0500
-+++ linux-avr32/drivers/video/atmel_lcdfb.c 2008-02-01 14:51:44.000000000 -0500
-@@ -37,7 +37,9 @@
- #endif
-
- #if defined(CONFIG_ARCH_AT91)
--#define ATMEL_LCDFB_FBINFO_DEFAULT FBINFO_DEFAULT
-+#define ATMEL_LCDFB_FBINFO_DEFAULT (FBINFO_DEFAULT \
-+ | FBINFO_PARTIAL_PAN_OK \
-+ | FBINFO_HWACCEL_YPAN)
-
- static inline void atmel_lcdfb_update_dma2d(struct atmel_lcdfb_info *sinfo,
- struct fb_var_screeninfo *var)
-@@ -74,7 +76,7 @@ static struct fb_fix_screeninfo atmel_lc
- .type = FB_TYPE_PACKED_PIXELS,
- .visual = FB_VISUAL_TRUECOLOR,
- .xpanstep = 0,
-- .ypanstep = 0,
-+ .ypanstep = 1,
- .ywrapstep = 0,
- .accel = FB_ACCEL_NONE,
- };
-@@ -148,6 +150,8 @@ static int atmel_lcdfb_alloc_video_memor
- return -ENOMEM;
- }
-
-+ memset(info->screen_base, 0, info->fix.smem_len);
-+
- return 0;
- }
-
-@@ -203,6 +207,26 @@ static int atmel_lcdfb_check_var(struct
- var->transp.offset = var->transp.length = 0;
- var->xoffset = var->yoffset = 0;
-
-+ /* Saturate vertical and horizontal timings at maximum values */
-+ var->vsync_len = min_t(u32, var->vsync_len,
-+ (ATMEL_LCDC_VPW >> ATMEL_LCDC_VPW_OFFSET) + 1);
-+ var->upper_margin = min_t(u32, var->upper_margin,
-+ ATMEL_LCDC_VBP >> ATMEL_LCDC_VBP_OFFSET);
-+ var->lower_margin = min_t(u32, var->lower_margin,
-+ ATMEL_LCDC_VFP);
-+ var->right_margin = min_t(u32, var->right_margin,
-+ (ATMEL_LCDC_HFP >> ATMEL_LCDC_HFP_OFFSET) + 1);
-+ var->hsync_len = min_t(u32, var->hsync_len,
-+ (ATMEL_LCDC_HPW >> ATMEL_LCDC_HPW_OFFSET) + 1);
-+ var->left_margin = min_t(u32, var->left_margin,
-+ ATMEL_LCDC_HBP + 1);
-+
-+ /* Some parameters can't be zero */
-+ var->vsync_len = max_t(u32, var->vsync_len, 1);
-+ var->right_margin = max_t(u32, var->right_margin, 1);
-+ var->hsync_len = max_t(u32, var->hsync_len, 1);
-+ var->left_margin = max_t(u32, var->left_margin, 1);
-+
- switch (var->bits_per_pixel) {
- case 1:
- case 2:
-@@ -516,7 +540,6 @@ static int __init atmel_lcdfb_init_fbinf
- struct fb_info *info = sinfo->info;
- int ret = 0;
-
-- memset_io(info->screen_base, 0, info->fix.smem_len);
- info->var.activate |= FB_ACTIVATE_FORCE | FB_ACTIVATE_NOW;
-
- dev_info(info->device,
-@@ -645,6 +668,11 @@ static int __init atmel_lcdfb_probe(stru
- info->screen_base = ioremap(info->fix.smem_start, info->fix.smem_len);
- if (!info->screen_base)
- goto release_intmem;
-+
-+ /*
-+ * Don't clear the framebuffer -- someone may have set
-+ * up a splash image.
-+ */
- } else {
- /* alocate memory buffer */
- ret = atmel_lcdfb_alloc_video_memory(sinfo);
-diff -Nrup linux-2.6.24/drivers/video/console/Kconfig linux-avr32/drivers/video/console/Kconfig
---- linux-2.6.24/drivers/video/console/Kconfig 2008-01-24 17:58:37.000000000 -0500
-+++ linux-avr32/drivers/video/console/Kconfig 2008-02-01 14:51:44.000000000 -0500
-@@ -6,7 +6,7 @@ menu "Console display driver support"
-
- config VGA_CONSOLE
- bool "VGA text console" if EMBEDDED || !X86
-- depends on !ARCH_ACORN && !ARCH_EBSA110 && !4xx && !8xx && !SPARC && !M68K && !PARISC && !FRV && !ARCH_VERSATILE && !SUPERH && !BLACKFIN
-+ depends on !ARCH_ACORN && !ARCH_EBSA110 && !4xx && !8xx && !SPARC && !M68K && !PARISC && !FRV && !ARCH_VERSATILE && !SUPERH && !BLACKFIN && !AVR32
- default y
- help
- Saying Y here will allow you to use Linux in text mode through a
-diff -Nrup linux-2.6.24/drivers/watchdog/Kconfig linux-avr32/drivers/watchdog/Kconfig
---- linux-2.6.24/drivers/watchdog/Kconfig 2008-01-24 17:58:37.000000000 -0500
-+++ linux-avr32/drivers/watchdog/Kconfig 2008-02-01 14:51:44.000000000 -0500
-@@ -223,7 +223,7 @@ config DAVINCI_WATCHDOG
-
- config AT32AP700X_WDT
- tristate "AT32AP700x watchdog"
-- depends on CPU_AT32AP7000
-+ depends on CPU_AT32AP700X
- help
- Watchdog timer embedded into AT32AP700x devices. This will reboot
- your system when the timeout is reached.
-diff -Nrup linux-2.6.24/include/asm-avr32/arch-at32ap/at32ap7000.h linux-avr32/include/asm-avr32/arch-at32ap/at32ap7000.h
---- linux-2.6.24/include/asm-avr32/arch-at32ap/at32ap7000.h 2008-01-24 17:58:37.000000000 -0500
-+++ linux-avr32/include/asm-avr32/arch-at32ap/at32ap7000.h 1969-12-31 19:00:00.000000000 -0500
-@@ -1,35 +0,0 @@
--/*
-- * Pin definitions for AT32AP7000.
-- *
-- * Copyright (C) 2006 Atmel Corporation
-- *
-- * This program is free software; you can redistribute it and/or modify
-- * it under the terms of the GNU General Public License version 2 as
-- * published by the Free Software Foundation.
-- */
--#ifndef __ASM_ARCH_AT32AP7000_H__
--#define __ASM_ARCH_AT32AP7000_H__
--
--#define GPIO_PERIPH_A 0
--#define GPIO_PERIPH_B 1
--
--#define NR_GPIO_CONTROLLERS 4
--
--/*
-- * Pin numbers identifying specific GPIO pins on the chip. They can
-- * also be converted to IRQ numbers by passing them through
-- * gpio_to_irq().
-- */
--#define GPIO_PIOA_BASE (0)
--#define GPIO_PIOB_BASE (GPIO_PIOA_BASE + 32)
--#define GPIO_PIOC_BASE (GPIO_PIOB_BASE + 32)
--#define GPIO_PIOD_BASE (GPIO_PIOC_BASE + 32)
--#define GPIO_PIOE_BASE (GPIO_PIOD_BASE + 32)
--
--#define GPIO_PIN_PA(N) (GPIO_PIOA_BASE + (N))
--#define GPIO_PIN_PB(N) (GPIO_PIOB_BASE + (N))
--#define GPIO_PIN_PC(N) (GPIO_PIOC_BASE + (N))
--#define GPIO_PIN_PD(N) (GPIO_PIOD_BASE + (N))
--#define GPIO_PIN_PE(N) (GPIO_PIOE_BASE + (N))
--
--#endif /* __ASM_ARCH_AT32AP7000_H__ */
-diff -Nrup linux-2.6.24/include/asm-avr32/arch-at32ap/at32ap700x.h linux-avr32/include/asm-avr32/arch-at32ap/at32ap700x.h
---- linux-2.6.24/include/asm-avr32/arch-at32ap/at32ap700x.h 1969-12-31 19:00:00.000000000 -0500
-+++ linux-avr32/include/asm-avr32/arch-at32ap/at32ap700x.h 2008-02-01 14:51:45.000000000 -0500
-@@ -0,0 +1,35 @@
-+/*
-+ * Pin definitions for AT32AP7000.
-+ *
-+ * Copyright (C) 2006 Atmel Corporation
-+ *
-+ * This program is free software; you can redistribute it and/or modify
-+ * it under the terms of the GNU General Public License version 2 as
-+ * published by the Free Software Foundation.
-+ */
-+#ifndef __ASM_ARCH_AT32AP700X_H__
-+#define __ASM_ARCH_AT32AP700X_H__
-+
-+#define GPIO_PERIPH_A 0
-+#define GPIO_PERIPH_B 1
-+
-+#define NR_GPIO_CONTROLLERS 4
-+
-+/*
-+ * Pin numbers identifying specific GPIO pins on the chip. They can
-+ * also be converted to IRQ numbers by passing them through
-+ * gpio_to_irq().
-+ */
-+#define GPIO_PIOA_BASE (0)
-+#define GPIO_PIOB_BASE (GPIO_PIOA_BASE + 32)
-+#define GPIO_PIOC_BASE (GPIO_PIOB_BASE + 32)
-+#define GPIO_PIOD_BASE (GPIO_PIOC_BASE + 32)
-+#define GPIO_PIOE_BASE (GPIO_PIOD_BASE + 32)
-+
-+#define GPIO_PIN_PA(N) (GPIO_PIOA_BASE + (N))
-+#define GPIO_PIN_PB(N) (GPIO_PIOB_BASE + (N))
-+#define GPIO_PIN_PC(N) (GPIO_PIOC_BASE + (N))
-+#define GPIO_PIN_PD(N) (GPIO_PIOD_BASE + (N))
-+#define GPIO_PIN_PE(N) (GPIO_PIOE_BASE + (N))
-+
-+#endif /* __ASM_ARCH_AT32AP700X_H__ */
-diff -Nrup linux-2.6.24/include/asm-avr32/arch-at32ap/board.h linux-avr32/include/asm-avr32/arch-at32ap/board.h
---- linux-2.6.24/include/asm-avr32/arch-at32ap/board.h 2008-01-24 17:58:37.000000000 -0500
-+++ linux-avr32/include/asm-avr32/arch-at32ap/board.h 2008-02-01 14:51:45.000000000 -0500
-@@ -51,6 +51,9 @@ struct platform_device *
- at32_add_device_ide(unsigned int id, unsigned int extint,
- struct ide_platform_data *data);
-
-+/* mask says which PWM channels to mux */
-+struct platform_device *at32_add_device_pwm(u32 mask);
-+
- /* depending on what's hooked up, not all SSC pins will be used */
- #define ATMEL_SSC_TK 0x01
- #define ATMEL_SSC_TF 0x02
-@@ -66,7 +69,13 @@ struct platform_device *
- at32_add_device_ssc(unsigned int id, unsigned int flags);
-
- struct platform_device *at32_add_device_twi(unsigned int id);
--struct platform_device *at32_add_device_mci(unsigned int id);
-+
-+struct mci_platform_data {
-+ int detect_pin;
-+ int wp_pin;
-+};
-+struct platform_device *
-+at32_add_device_mci(unsigned int id, struct mci_platform_data *data);
- struct platform_device *at32_add_device_ac97c(unsigned int id);
- struct platform_device *at32_add_device_abdac(unsigned int id);
-
-diff -Nrup linux-2.6.24/include/asm-avr32/arch-at32ap/cpu.h linux-avr32/include/asm-avr32/arch-at32ap/cpu.h
---- linux-2.6.24/include/asm-avr32/arch-at32ap/cpu.h 2008-01-24 17:58:37.000000000 -0500
-+++ linux-avr32/include/asm-avr32/arch-at32ap/cpu.h 2008-02-01 14:51:45.000000000 -0500
-@@ -14,7 +14,7 @@
- * Only AT32AP7000 is defined for now. We can identify the specific
- * chip at runtime, but I'm not sure if it's really worth it.
- */
--#ifdef CONFIG_CPU_AT32AP7000
-+#ifdef CONFIG_CPU_AT32AP700X
- # define cpu_is_at32ap7000() (1)
- #else
- # define cpu_is_at32ap7000() (0)
-diff -Nrup linux-2.6.24/include/asm-avr32/arch-at32ap/io.h linux-avr32/include/asm-avr32/arch-at32ap/io.h
---- linux-2.6.24/include/asm-avr32/arch-at32ap/io.h 2008-01-24 17:58:37.000000000 -0500
-+++ linux-avr32/include/asm-avr32/arch-at32ap/io.h 2008-02-01 14:51:45.000000000 -0500
-@@ -4,7 +4,7 @@
- /* For "bizarre" halfword swapping */
- #include <linux/byteorder/swabb.h>
-
--#if defined(CONFIG_AP7000_32_BIT_SMC)
-+#if defined(CONFIG_AP700X_32_BIT_SMC)
- # define __swizzle_addr_b(addr) (addr ^ 3UL)
- # define __swizzle_addr_w(addr) (addr ^ 2UL)
- # define __swizzle_addr_l(addr) (addr)
-@@ -14,7 +14,7 @@
- # define __mem_ioswabb(a, x) (x)
- # define __mem_ioswabw(a, x) swab16(x)
- # define __mem_ioswabl(a, x) swab32(x)
--#elif defined(CONFIG_AP7000_16_BIT_SMC)
-+#elif defined(CONFIG_AP700X_16_BIT_SMC)
- # define __swizzle_addr_b(addr) (addr ^ 1UL)
- # define __swizzle_addr_w(addr) (addr)
- # define __swizzle_addr_l(addr) (addr)
-diff -Nrup linux-2.6.24/include/asm-avr32/arch-at32ap/portmux.h linux-avr32/include/asm-avr32/arch-at32ap/portmux.h
---- linux-2.6.24/include/asm-avr32/arch-at32ap/portmux.h 2008-01-24 17:58:37.000000000 -0500
-+++ linux-avr32/include/asm-avr32/arch-at32ap/portmux.h 2008-02-01 14:51:45.000000000 -0500
-@@ -26,4 +26,16 @@ void at32_select_periph(unsigned int pin
- void at32_select_gpio(unsigned int pin, unsigned long flags);
- void at32_reserve_pin(unsigned int pin);
-
-+#ifdef CONFIG_GPIO_DEV
-+
-+/* Gang allocators and accessors; used by the GPIO /dev driver */
-+int at32_gpio_port_is_valid(unsigned int port);
-+int at32_select_gpio_pins(unsigned int port, u32 pins, u32 oe_mask);
-+void at32_deselect_pins(unsigned int port, u32 pins);
-+
-+u32 at32_gpio_get_value_multiple(unsigned int port, u32 pins);
-+void at32_gpio_set_value_multiple(unsigned int port, u32 value, u32 mask);
-+
-+#endif /* CONFIG_GPIO_DEV */
-+
- #endif /* __ASM_ARCH_PORTMUX_H__ */
-diff -Nrup linux-2.6.24/include/asm-avr32/dma-controller.h linux-avr32/include/asm-avr32/dma-controller.h
---- linux-2.6.24/include/asm-avr32/dma-controller.h 1969-12-31 19:00:00.000000000 -0500
-+++ linux-avr32/include/asm-avr32/dma-controller.h 2008-02-01 14:51:45.000000000 -0500
-@@ -0,0 +1,166 @@
-+/*
-+ * Copyright (C) 2005-2006 Atmel Corporation
-+ *
-+ * This program is free software; you can redistribute it and/or modify
-+ * it under the terms of the GNU General Public License version 2 as
-+ * published by the Free Software Foundation.
-+ */
-+#ifndef __ASM_AVR32_DMA_CONTROLLER_H
-+#define __ASM_AVR32_DMA_CONTROLLER_H
-+
-+#include <linux/device.h>
-+
-+#define DMA_DIR_MEM_TO_MEM 0x0000
-+#define DMA_DIR_MEM_TO_PERIPH 0x0001
-+#define DMA_DIR_PERIPH_TO_MEM 0x0002
-+#define DMA_DIR_PERIPH_TO_PERIPH 0x0003
-+
-+#define DMA_WIDTH_8BIT 0
-+#define DMA_WIDTH_16BIT 1
-+#define DMA_WIDTH_32BIT 2
-+
-+struct dma_request {
-+ struct dma_controller *dmac;
-+ struct list_head list;
-+
-+ unsigned short channel;
-+
-+ void (*xfer_complete)(struct dma_request *req);
-+ void (*block_complete)(struct dma_request *req);
-+ void (*error)(struct dma_request *req);
-+};
-+
-+struct dma_request_sg {
-+ struct dma_request req;
-+
-+ int nr_sg;
-+ struct scatterlist *sg;
-+ unsigned long block_size;
-+ unsigned int nr_blocks;
-+
-+ dma_addr_t data_reg;
-+ unsigned short periph_id;
-+
-+ unsigned char direction;
-+ unsigned char width;
-+};
-+#define to_dma_request_sg(_req) \
-+ container_of(_req, struct dma_request_sg, req)
-+
-+struct dma_request_cyclic {
-+ struct dma_request req;
-+
-+ int periods;
-+ unsigned long buffer_size;
-+
-+ dma_addr_t buffer_start;
-+ dma_addr_t data_reg;
-+
-+ unsigned short periph_id;
-+ unsigned char direction;
-+ unsigned char width;
-+
-+ void *dev_id;
-+};
-+#define to_dma_request_cyclic(_req) \
-+ container_of(_req, struct dma_request_cyclic, req)
-+
-+struct dma_request_memcpy {
-+ struct dma_request req;
-+
-+ dma_addr_t src_addr;
-+ unsigned int src_width;
-+ unsigned int src_stride;
-+
-+ dma_addr_t dst_addr;
-+ unsigned int dst_width;
-+ unsigned int dst_stride;
-+
-+ size_t length;
-+
-+ unsigned short src_reverse:1;
-+ unsigned short dst_reverse:1;
-+};
-+#define to_dma_request_memcpy(_req) \
-+ container_of(_req, struct dma_request_memcpy, req)
-+
-+struct dma_controller {
-+ struct list_head list;
-+ int id;
-+ struct device *dev;
-+
-+ int (*alloc_channel)(struct dma_controller *dmac);
-+ void (*release_channel)(struct dma_controller *dmac,
-+ int channel);
-+ int (*prepare_request_sg)(struct dma_controller *dmac,
-+ struct dma_request_sg *req);
-+ int (*prepare_request_cyclic)(struct dma_controller *dmac,
-+ struct dma_request_cyclic *req);
-+ int (*prepare_request_memcpy)(struct dma_controller *dmac,
-+ struct dma_request_memcpy *req);
-+ int (*start_request)(struct dma_controller *dmac,
-+ unsigned int channel);
-+ int (*stop_request)(struct dma_controller *dmac,
-+ unsigned int channel);
-+ dma_addr_t (*get_current_pos)(struct dma_controller *dmac,
-+ unsigned int channel);
-+};
-+
-+static inline int
-+dma_alloc_channel(struct dma_controller *dmac)
-+{
-+ return dmac->alloc_channel(dmac);
-+}
-+
-+static inline void
-+dma_release_channel(struct dma_controller *dmac, int chan)
-+{
-+ dmac->release_channel(dmac, chan);
-+}
-+
-+static inline int
-+dma_prepare_request_sg(struct dma_controller *dmac,
-+ struct dma_request_sg *req)
-+{
-+ return dmac->prepare_request_sg(dmac, req);
-+}
-+
-+static inline int
-+dma_prepare_request_cyclic(struct dma_controller *dmac,
-+ struct dma_request_cyclic *req)
-+{
-+ return dmac->prepare_request_cyclic(dmac, req);
-+}
-+
-+static inline int
-+dma_prepare_request_memcpy(struct dma_controller *dmac,
-+ struct dma_request_memcpy *req)
-+{
-+ return dmac->prepare_request_memcpy(dmac, req);
-+}
-+
-+static inline int
-+dma_start_request(struct dma_controller *dmac,
-+ unsigned int channel)
-+{
-+ return dmac->start_request(dmac, channel);
-+}
-+
-+static inline int
-+dma_stop_request(struct dma_controller *dmac,
-+ unsigned int channel)
-+{
-+ return dmac->stop_request(dmac, channel);
-+}
-+
-+static inline dma_addr_t
-+dma_get_current_pos(struct dma_controller *dmac,
-+ unsigned int channel)
-+{
-+ return dmac->get_current_pos(dmac, channel);
-+}
-+
-+extern int register_dma_controller(struct dma_controller *dmac);
-+extern struct dma_controller *find_dma_controller(int id);
-+
-+#endif /* __ASM_AVR32_DMA_CONTROLLER_H */
-diff -Nrup linux-2.6.24/include/asm-avr32/irq.h linux-avr32/include/asm-avr32/irq.h
---- linux-2.6.24/include/asm-avr32/irq.h 2008-01-24 17:58:37.000000000 -0500
-+++ linux-avr32/include/asm-avr32/irq.h 2008-02-01 14:51:45.000000000 -0500
-@@ -11,4 +11,9 @@
-
- #define irq_canonicalize(i) (i)
-
-+#ifndef __ASSEMBLER__
-+int nmi_enable(void);
-+void nmi_disable(void);
-+#endif
-+
- #endif /* __ASM_AVR32_IOCTLS_H */
-diff -Nrup linux-2.6.24/include/asm-avr32/kdebug.h linux-avr32/include/asm-avr32/kdebug.h
---- linux-2.6.24/include/asm-avr32/kdebug.h 2008-01-24 17:58:37.000000000 -0500
-+++ linux-avr32/include/asm-avr32/kdebug.h 2008-02-01 14:51:45.000000000 -0500
-@@ -5,6 +5,7 @@
- enum die_val {
- DIE_BREAKPOINT,
- DIE_SSTEP,
-+ DIE_NMI,
- };
-
- #endif /* __ASM_AVR32_KDEBUG_H */
-diff -Nrup linux-2.6.24/include/asm-avr32/ocd.h linux-avr32/include/asm-avr32/ocd.h
---- linux-2.6.24/include/asm-avr32/ocd.h 2008-01-24 17:58:37.000000000 -0500
-+++ linux-avr32/include/asm-avr32/ocd.h 2008-02-01 14:51:45.000000000 -0500
-@@ -533,6 +533,11 @@ static inline void __ocd_write(unsigned
- #define ocd_read(reg) __ocd_read(OCD_##reg)
- #define ocd_write(reg, value) __ocd_write(OCD_##reg, value)
-
-+struct task_struct;
-+
-+void ocd_enable(struct task_struct *child);
-+void ocd_disable(struct task_struct *child);
-+
- #endif /* !__ASSEMBLER__ */
-
- #endif /* __ASM_AVR32_OCD_H */
-diff -Nrup linux-2.6.24/include/asm-avr32/processor.h linux-avr32/include/asm-avr32/processor.h
---- linux-2.6.24/include/asm-avr32/processor.h 2008-01-24 17:58:37.000000000 -0500
-+++ linux-avr32/include/asm-avr32/processor.h 2008-02-01 14:51:45.000000000 -0500
-@@ -57,11 +57,25 @@ struct avr32_cpuinfo {
- unsigned short cpu_revision;
- enum tlb_config tlb_config;
- unsigned long features;
-+ u32 device_id;
-
- struct cache_info icache;
- struct cache_info dcache;
- };
-
-+static inline unsigned int avr32_get_manufacturer_id(struct avr32_cpuinfo *cpu)
-+{
-+ return (cpu->device_id >> 1) & 0x7f;
-+}
-+static inline unsigned int avr32_get_product_number(struct avr32_cpuinfo *cpu)
-+{
-+ return (cpu->device_id >> 12) & 0xffff;
-+}
-+static inline unsigned int avr32_get_chip_revision(struct avr32_cpuinfo *cpu)
-+{
-+ return (cpu->device_id >> 28) & 0x0f;
-+}
-+
- extern struct avr32_cpuinfo boot_cpu_data;
-
- #ifdef CONFIG_SMP
-diff -Nrup linux-2.6.24/include/asm-avr32/ptrace.h linux-avr32/include/asm-avr32/ptrace.h
---- linux-2.6.24/include/asm-avr32/ptrace.h 2008-01-24 17:58:37.000000000 -0500
-+++ linux-avr32/include/asm-avr32/ptrace.h 2008-02-01 14:51:45.000000000 -0500
-@@ -121,7 +121,15 @@ struct pt_regs {
- };
-
- #ifdef __KERNEL__
--# define user_mode(regs) (((regs)->sr & MODE_MASK) == MODE_USER)
-+
-+#include <asm/ocd.h>
-+
-+#define arch_ptrace_attach(child) ocd_enable(child)
-+
-+#define user_mode(regs) (((regs)->sr & MODE_MASK) == MODE_USER)
-+#define instruction_pointer(regs) ((regs)->pc)
-+#define profile_pc(regs) instruction_pointer(regs)
-+
- extern void show_regs (struct pt_regs *);
-
- static __inline__ int valid_user_regs(struct pt_regs *regs)
-@@ -141,9 +149,6 @@ static __inline__ int valid_user_regs(st
- return 0;
- }
-
--#define instruction_pointer(regs) ((regs)->pc)
--
--#define profile_pc(regs) instruction_pointer(regs)
-
- #endif /* __KERNEL__ */
-
-diff -Nrup linux-2.6.24/include/asm-avr32/thread_info.h linux-avr32/include/asm-avr32/thread_info.h
---- linux-2.6.24/include/asm-avr32/thread_info.h 2008-01-24 17:58:37.000000000 -0500
-+++ linux-avr32/include/asm-avr32/thread_info.h 2008-02-01 14:51:45.000000000 -0500
-@@ -88,6 +88,7 @@ static inline struct thread_info *curren
- #define TIF_MEMDIE 6
- #define TIF_RESTORE_SIGMASK 7 /* restore signal mask in do_signal */
- #define TIF_CPU_GOING_TO_SLEEP 8 /* CPU is entering sleep 0 mode */
-+#define TIF_DEBUG 30 /* debugging enabled */
- #define TIF_USERSPACE 31 /* true if FS sets userspace */
-
- #define _TIF_SYSCALL_TRACE (1 << TIF_SYSCALL_TRACE)
-diff -Nrup linux-2.6.24/include/linux/atmel_pwm.h linux-avr32/include/linux/atmel_pwm.h
---- linux-2.6.24/include/linux/atmel_pwm.h 1969-12-31 19:00:00.000000000 -0500
-+++ linux-avr32/include/linux/atmel_pwm.h 2008-02-01 14:51:47.000000000 -0500
-@@ -0,0 +1,70 @@
-+#ifndef __LINUX_ATMEL_PWM_H
-+#define __LINUX_ATMEL_PWM_H
-+
-+/**
-+ * struct pwm_channel - driver handle to a PWM channel
-+ * @regs: base of this channel's registers
-+ * @index: number of this channel (0..31)
-+ * @mck: base clock rate, which can be prescaled and maybe subdivided
-+ *
-+ * Drivers initialize a pwm_channel structure using pwm_channel_alloc().
-+ * Then they configure its clock rate (derived from MCK), alignment,
-+ * polarity, and duty cycle by writing directly to the channel registers,
-+ * before enabling the channel by calling pwm_channel_enable().
-+ *
-+ * After emitting a PWM signal for the desired length of time, drivers
-+ * may then pwm_channel_disable() or pwm_channel_free(). Both of these
-+ * disable the channel, but when it's freed the IRQ is deconfigured and
-+ * the channel must later be re-allocated and reconfigured.
-+ *
-+ * Note that if the period or duty cycle need to be changed while the
-+ * PWM channel is operating, drivers must use the PWM_CUPD double buffer
-+ * mechanism, either polling until they change or getting implicitly
-+ * notified through a once-per-period interrupt handler.
-+ */
-+struct pwm_channel {
-+ void __iomem *regs;
-+ unsigned index;
-+ unsigned long mck;
-+};
-+
-+extern int pwm_channel_alloc(int index, struct pwm_channel *ch);
-+extern int pwm_channel_free(struct pwm_channel *ch);
-+
-+extern int pwm_clk_alloc(unsigned prescale, unsigned div);
-+extern void pwm_clk_free(unsigned clk);
-+
-+extern int __pwm_channel_onoff(struct pwm_channel *ch, int enabled);
-+
-+#define pwm_channel_enable(ch) __pwm_channel_onoff((ch), 1)
-+#define pwm_channel_disable(ch) __pwm_channel_onoff((ch), 0)
-+
-+/* periodic interrupts, mostly for CUPD changes to period or cycle */
-+extern int pwm_channel_handler(struct pwm_channel *ch,
-+ void (*handler)(struct pwm_channel *ch));
-+
-+/* per-channel registers (banked at pwm_channel->regs) */
-+#define PWM_CMR 0x00 /* mode register */
-+#define PWM_CPR_CPD (1 << 10) /* set: CUPD modifies period */
-+#define PWM_CPR_CPOL (1 << 9) /* set: idle high */
-+#define PWM_CPR_CALG (1 << 8) /* set: center align */
-+#define PWM_CPR_CPRE (0xf << 0) /* mask: rate is mck/(2^pre) */
-+#define PWM_CPR_CLKA (0xb << 0) /* rate CLKA */
-+#define PWM_CPR_CLKB (0xc << 0) /* rate CLKB */
-+#define PWM_CDTY 0x04 /* duty cycle (max of CPRD) */
-+#define PWM_CPRD 0x08 /* period (count up from zero) */
-+#define PWM_CCNT 0x0c /* counter (20 bits?) */
-+#define PWM_CUPD 0x10 /* update CPRD (or CDTY) next period */
-+
-+static inline void
-+pwm_channel_writel(struct pwm_channel *pwmc, unsigned offset, u32 val)
-+{
-+ __raw_writel(val, pwmc->regs + offset);
-+}
-+
-+static inline u32 pwm_channel_readl(struct pwm_channel *pwmc, unsigned offset)
-+{
-+ return __raw_readl(pwmc->regs + offset);
-+}
-+
-+#endif /* __LINUX_ATMEL_PWM_H */
-diff -Nrup linux-2.6.24/include/video/atmel_lcdc.h linux-avr32/include/video/atmel_lcdc.h
---- linux-2.6.24/include/video/atmel_lcdc.h 2008-01-24 17:58:37.000000000 -0500
-+++ linux-avr32/include/video/atmel_lcdc.h 2008-02-01 14:51:47.000000000 -0500
-@@ -115,20 +115,20 @@ struct atmel_lcdfb_info {
- #define ATMEL_LCDC_MEMOR_LITTLE (1 << 31)
-
- #define ATMEL_LCDC_TIM1 0x0808
--#define ATMEL_LCDC_VFP (0xff << 0)
-+#define ATMEL_LCDC_VFP (0xffU << 0)
- #define ATMEL_LCDC_VBP_OFFSET 8
--#define ATMEL_LCDC_VBP (0xff << ATMEL_LCDC_VBP_OFFSET)
-+#define ATMEL_LCDC_VBP (0xffU << ATMEL_LCDC_VBP_OFFSET)
- #define ATMEL_LCDC_VPW_OFFSET 16
--#define ATMEL_LCDC_VPW (0x3f << ATMEL_LCDC_VPW_OFFSET)
-+#define ATMEL_LCDC_VPW (0x3fU << ATMEL_LCDC_VPW_OFFSET)
- #define ATMEL_LCDC_VHDLY_OFFSET 24
--#define ATMEL_LCDC_VHDLY (0xf << ATMEL_LCDC_VHDLY_OFFSET)
-+#define ATMEL_LCDC_VHDLY (0xfU << ATMEL_LCDC_VHDLY_OFFSET)
-
- #define ATMEL_LCDC_TIM2 0x080c
--#define ATMEL_LCDC_HBP (0xff << 0)
-+#define ATMEL_LCDC_HBP (0xffU << 0)
- #define ATMEL_LCDC_HPW_OFFSET 8
--#define ATMEL_LCDC_HPW (0x3f << ATMEL_LCDC_HPW_OFFSET)
-+#define ATMEL_LCDC_HPW (0x3fU << ATMEL_LCDC_HPW_OFFSET)
- #define ATMEL_LCDC_HFP_OFFSET 21
--#define ATMEL_LCDC_HFP (0x7ff << ATMEL_LCDC_HFP_OFFSET)
-+#define ATMEL_LCDC_HFP (0x7ffU << ATMEL_LCDC_HFP_OFFSET)
-
- #define ATMEL_LCDC_LCDFRMCFG 0x0810
- #define ATMEL_LCDC_LINEVAL (0x7ff << 0)
-diff -Nrup linux-2.6.24/kernel/ptrace.c linux-avr32/kernel/ptrace.c
---- linux-2.6.24/kernel/ptrace.c 2008-01-24 17:58:37.000000000 -0500
-+++ linux-avr32/kernel/ptrace.c 2008-02-01 14:51:47.000000000 -0500
-@@ -470,6 +470,8 @@ asmlinkage long sys_ptrace(long request,
- lock_kernel();
- if (request == PTRACE_TRACEME) {
- ret = ptrace_traceme();
-+ if (!ret)
-+ arch_ptrace_attach(current);
- goto out;
- }
-
-diff -Nrup linux-2.6.24/sound/avr32/ac97c.c linux-avr32/sound/avr32/ac97c.c
---- linux-2.6.24/sound/avr32/ac97c.c 1969-12-31 19:00:00.000000000 -0500
-+++ linux-avr32/sound/avr32/ac97c.c 2008-02-01 14:51:48.000000000 -0500
-@@ -0,0 +1,914 @@
-+/*
-+ * Driver for the Atmel AC97 controller
-+ *
-+ * Copyright (C) 2005-2007 Atmel Corporation
-+ *
-+ * This program is free software; you can redistribute it and/or modify it
-+ * under the terms of the GNU General Public License version 2 as published by
-+ * the Free Software Foundation.
-+ */
-+#include <linux/clk.h>
-+#include <linux/delay.h>
-+#include <linux/dma-mapping.h>
-+#include <linux/init.h>
-+#include <linux/interrupt.h>
-+#include <linux/module.h>
-+#include <linux/platform_device.h>
-+#include <linux/mutex.h>
-+#include <linux/io.h>
-+
-+#include <sound/driver.h>
-+#include <sound/core.h>
-+#include <sound/initval.h>
-+#include <sound/pcm.h>
-+#include <sound/pcm_params.h>
-+#include <sound/ac97_codec.h>
-+#include <sound/memalloc.h>
-+
-+#include <asm/dma-controller.h>
-+
-+#include "ac97c.h"
-+
-+/* Serialize access to opened */
-+static DEFINE_MUTEX(opened_mutex);
-+
-+struct atmel_ac97_dma_info {
-+ struct dma_request_cyclic req_tx;
-+ struct dma_request_cyclic req_rx;
-+ unsigned short rx_periph_id;
-+ unsigned short tx_periph_id;
-+};
-+
-+struct atmel_ac97 {
-+ /* Serialize access to opened */
-+ spinlock_t lock;
-+ void __iomem *regs;
-+ struct snd_pcm_substream *playback_substream;
-+ struct snd_pcm_substream *capture_substream;
-+ struct snd_card *card;
-+ struct snd_pcm *pcm;
-+ struct snd_ac97 *ac97;
-+ struct snd_ac97_bus *ac97_bus;
-+ int opened;
-+ int period;
-+ u64 cur_format;
-+ unsigned int cur_rate;
-+ struct clk *mck;
-+ struct platform_device *pdev;
-+ struct atmel_ac97_dma_info dma;
-+};
-+
-+#define get_chip(card) ((struct atmel_ac97 *)(card)->private_data)
-+
-+#define ac97c_writel(chip, reg, val) \
-+ __raw_writel((val), (chip)->regs + AC97C_##reg)
-+#define ac97c_readl(chip, reg) \
-+ __raw_readl((chip)->regs + AC97C_##reg)
-+
-+/*
-+ * PCM part
-+ */
-+static struct snd_pcm_hardware snd_atmel_ac97_playback_hw = {
-+ .info = (SNDRV_PCM_INFO_INTERLEAVED
-+ | SNDRV_PCM_INFO_MMAP
-+ | SNDRV_PCM_INFO_MMAP_VALID
-+ | SNDRV_PCM_INFO_BLOCK_TRANSFER
-+ | SNDRV_PCM_INFO_JOINT_DUPLEX),
-+ .formats = (SNDRV_PCM_FMTBIT_S16_BE
-+ | SNDRV_PCM_FMTBIT_S16_LE),
-+ .rates = (SNDRV_PCM_RATE_CONTINUOUS),
-+ .rate_min = 4000,
-+ .rate_max = 48000,
-+ .channels_min = 1,
-+ .channels_max = 6,
-+ .buffer_bytes_max = 64*1024,
-+ .period_bytes_min = 512,
-+ .period_bytes_max = 4095,
-+ .periods_min = 8,
-+ .periods_max = 1024,
-+};
-+
-+static struct snd_pcm_hardware snd_atmel_ac97_capture_hw = {
-+ .info = (SNDRV_PCM_INFO_INTERLEAVED
-+ | SNDRV_PCM_INFO_MMAP
-+ | SNDRV_PCM_INFO_MMAP_VALID
-+ | SNDRV_PCM_INFO_BLOCK_TRANSFER
-+ | SNDRV_PCM_INFO_JOINT_DUPLEX),
-+ .formats = (SNDRV_PCM_FMTBIT_S16_BE
-+ | SNDRV_PCM_FMTBIT_S16_LE),
-+ .rates = (SNDRV_PCM_RATE_CONTINUOUS),
-+ .rate_min = 4000,
-+ .rate_max = 48000,
-+ .channels_min = 1,
-+ .channels_max = 2,
-+ .buffer_bytes_max = 64*1024,
-+ .period_bytes_min = 512,
-+ .period_bytes_max = 4095,
-+ .periods_min = 8,
-+ .periods_max = 1024,
-+};
-+
-+/*
-+ * PCM functions
-+ */
-+static int
-+snd_atmel_ac97_playback_open(struct snd_pcm_substream *substream)
-+{
-+ struct atmel_ac97 *chip = snd_pcm_substream_chip(substream);
-+ struct snd_pcm_runtime *runtime = substream->runtime;
-+
-+ mutex_lock(&opened_mutex);
-+ chip->opened++;
-+ runtime->hw = snd_atmel_ac97_playback_hw;
-+ if (chip->cur_rate) {
-+ runtime->hw.rate_min = chip->cur_rate;
-+ runtime->hw.rate_max = chip->cur_rate;
-+ }
-+ if (chip->cur_format)
-+ runtime->hw.formats = (1ULL << chip->cur_format);
-+ mutex_unlock(&opened_mutex);
-+ chip->playback_substream = substream;
-+ chip->period = 0;
-+ return 0;
-+}
-+
-+static int
-+snd_atmel_ac97_capture_open(struct snd_pcm_substream *substream)
-+{
-+ struct atmel_ac97 *chip = snd_pcm_substream_chip(substream);
-+ struct snd_pcm_runtime *runtime = substream->runtime;
-+
-+ mutex_lock(&opened_mutex);
-+ chip->opened++;
-+ runtime->hw = snd_atmel_ac97_capture_hw;
-+ if (chip->cur_rate) {
-+ runtime->hw.rate_min = chip->cur_rate;
-+ runtime->hw.rate_max = chip->cur_rate;
-+ }
-+ if (chip->cur_format)
-+ runtime->hw.formats = (1ULL << chip->cur_format);
-+ mutex_unlock(&opened_mutex);
-+ chip->capture_substream = substream;
-+ chip->period = 0;
-+ return 0;
-+}
-+
-+static int snd_atmel_ac97_playback_close(struct snd_pcm_substream *substream)
-+{
-+ struct atmel_ac97 *chip = snd_pcm_substream_chip(substream);
-+ mutex_lock(&opened_mutex);
-+ chip->opened--;
-+ if (!chip->opened) {
-+ chip->cur_rate = 0;
-+ chip->cur_format = 0;
-+ }
-+ mutex_unlock(&opened_mutex);
-+ return 0;
-+}
-+
-+static int snd_atmel_ac97_capture_close(struct snd_pcm_substream *substream)
-+{
-+ struct atmel_ac97 *chip = snd_pcm_substream_chip(substream);
-+ mutex_lock(&opened_mutex);
-+ chip->opened--;
-+ if (!chip->opened) {
-+ chip->cur_rate = 0;
-+ chip->cur_format = 0;
-+ }
-+ mutex_unlock(&opened_mutex);
-+ return 0;
-+}
-+
-+static int
-+snd_atmel_ac97_playback_hw_params(struct snd_pcm_substream *substream,
-+ struct snd_pcm_hw_params *hw_params)
-+{
-+ struct atmel_ac97 *chip = snd_pcm_substream_chip(substream);
-+ int err;
-+
-+ err = snd_pcm_lib_malloc_pages(substream,
-+ params_buffer_bytes(hw_params));
-+ if (err < 0)
-+ return err;
-+
-+ /* Set restrictions to params */
-+ mutex_lock(&opened_mutex);
-+ chip->cur_rate = params_rate(hw_params);
-+ chip->cur_format = params_format(hw_params);
-+ mutex_unlock(&opened_mutex);
-+
-+ return 0;
-+}
-+
-+static int
-+snd_atmel_ac97_capture_hw_params(struct snd_pcm_substream *substream,
-+ struct snd_pcm_hw_params *hw_params)
-+{
-+ struct atmel_ac97 *chip = snd_pcm_substream_chip(substream);
-+ int err;
-+
-+ err = snd_pcm_lib_malloc_pages(substream,
-+ params_buffer_bytes(hw_params));
-+ if (err < 0)
-+ return err;
-+
-+ /* Set restrictions to params */
-+ mutex_lock(&opened_mutex);
-+ chip->cur_rate = params_rate(hw_params);
-+ chip->cur_format = params_format(hw_params);
-+ mutex_unlock(&opened_mutex);
-+
-+ return 0;
-+}
-+
-+static int snd_atmel_ac97_playback_hw_free(struct snd_pcm_substream *substream)
-+{
-+ return snd_pcm_lib_free_pages(substream);
-+}
-+
-+static int snd_atmel_ac97_capture_hw_free(struct snd_pcm_substream *substream)
-+{
-+
-+ return snd_pcm_lib_free_pages(substream);
-+}
-+
-+static int snd_atmel_ac97_playback_prepare(struct snd_pcm_substream *substream)
-+{
-+ struct atmel_ac97 *chip = snd_pcm_substream_chip(substream);
-+ struct platform_device *pdev = chip->pdev;
-+ struct snd_pcm_runtime *runtime = substream->runtime;
-+ int block_size = frames_to_bytes(runtime, runtime->period_size);
-+ unsigned long word = 0;
-+ unsigned long buffer_size = 0;
-+
-+ dma_sync_single_for_device(&pdev->dev, runtime->dma_addr,
-+ block_size * 2, DMA_TO_DEVICE);
-+
-+ /* Assign slots to channels */
-+ switch (substream->runtime->channels) {
-+ case 1:
-+ word |= AC97C_CH_ASSIGN(PCM_LEFT, A);
-+ break;
-+ case 2:
-+ /* Assign Left and Right slot to Channel A */
-+ word |= AC97C_CH_ASSIGN(PCM_LEFT, A)
-+ | AC97C_CH_ASSIGN(PCM_RIGHT, A);
-+ break;
-+ default:
-+ /* TODO: support more than two channels */
-+ return -EINVAL;
-+ break;
-+ }
-+ ac97c_writel(chip, OCA, word);
-+
-+ /* Configure sample format and size */
-+ word = AC97C_CMR_PDCEN | AC97C_CMR_SIZE_16;
-+
-+ switch (runtime->format) {
-+ case SNDRV_PCM_FORMAT_S16_LE:
-+ word |= AC97C_CMR_CEM_LITTLE;
-+ break;
-+ case SNDRV_PCM_FORMAT_S16_BE: /* fall through */
-+ default:
-+ word &= ~AC97C_CMR_CEM_LITTLE;
-+ break;
-+ }
-+
-+ ac97c_writel(chip, CAMR, word);
-+
-+ /* Set variable rate if needed */
-+ if (runtime->rate != 48000) {
-+ word = ac97c_readl(chip, MR);
-+ word |= AC97C_MR_VRA;
-+ ac97c_writel(chip, MR, word);
-+ } else {
-+ /* Clear Variable Rate Bit */
-+ word = ac97c_readl(chip, MR);
-+ word &= ~AC97C_MR_VRA;
-+ ac97c_writel(chip, MR, word);
-+ }
-+
-+ /* Set rate */
-+ snd_ac97_set_rate(chip->ac97, AC97_PCM_FRONT_DAC_RATE, runtime->rate);
-+
-+ buffer_size = frames_to_bytes(runtime, runtime->period_size) *
-+ runtime->periods;
-+
-+ chip->dma.req_tx.buffer_size = buffer_size;
-+ chip->dma.req_tx.periods = runtime->periods;
-+
-+ BUG_ON(chip->dma.req_tx.buffer_size !=
-+ (chip->dma.req_tx.periods *
-+ frames_to_bytes(runtime, runtime->period_size)));
-+
-+ chip->dma.req_tx.buffer_start = runtime->dma_addr;
-+ chip->dma.req_tx.data_reg = (dma_addr_t)(chip->regs + AC97C_CATHR + 2);
-+ chip->dma.req_tx.periph_id = chip->dma.tx_periph_id;
-+ chip->dma.req_tx.direction = DMA_DIR_MEM_TO_PERIPH;
-+ chip->dma.req_tx.width = DMA_WIDTH_16BIT;
-+ chip->dma.req_tx.dev_id = chip;
-+
-+ return 0;
-+}
-+
-+static int snd_atmel_ac97_capture_prepare(struct snd_pcm_substream *substream)
-+{
-+ struct atmel_ac97 *chip = snd_pcm_substream_chip(substream);
-+ struct platform_device *pdev = chip->pdev;
-+ struct snd_pcm_runtime *runtime = substream->runtime;
-+ int block_size = frames_to_bytes(runtime, runtime->period_size);
-+ unsigned long word = 0;
-+ unsigned long buffer_size = 0;
-+
-+ dma_sync_single_for_device(&pdev->dev, runtime->dma_addr,
-+ block_size * 2, DMA_FROM_DEVICE);
-+
-+ /* Assign slots to channels */
-+ switch (substream->runtime->channels) {
-+ case 1:
-+ word |= AC97C_CH_ASSIGN(PCM_LEFT, A);
-+ break;
-+ case 2:
-+ /* Assign Left and Right slot to Channel A */
-+ word |= AC97C_CH_ASSIGN(PCM_LEFT, A)
-+ | AC97C_CH_ASSIGN(PCM_RIGHT, A);
-+ break;
-+ default:
-+ /* TODO: support more than two channels */
-+ return -EINVAL;
-+ break;
-+ }
-+ ac97c_writel(chip, ICA, word);
-+
-+ /* Configure sample format and size */
-+ word = AC97C_CMR_PDCEN | AC97C_CMR_SIZE_16;
-+
-+ switch (runtime->format) {
-+ case SNDRV_PCM_FORMAT_S16_LE:
-+ word |= AC97C_CMR_CEM_LITTLE;
-+ break;
-+ case SNDRV_PCM_FORMAT_S16_BE:
-+ default:
-+ word &= ~(AC97C_CMR_CEM_LITTLE);
-+ break;
-+ }
-+
-+ ac97c_writel(chip, CAMR, word);
-+
-+ /* Set variable rate if needed */
-+ if (runtime->rate != 48000) {
-+ word = ac97c_readl(chip, MR);
-+ word |= AC97C_MR_VRA;
-+ ac97c_writel(chip, MR, word);
-+ } else {
-+ /* Clear Variable Rate Bit */
-+ word = ac97c_readl(chip, MR);
-+ word &= ~(AC97C_MR_VRA);
-+ ac97c_writel(chip, MR, word);
-+ }
-+
-+ /* Set rate */
-+ snd_ac97_set_rate(chip->ac97, AC97_PCM_LR_ADC_RATE, runtime->rate);
-+
-+ buffer_size = frames_to_bytes(runtime, runtime->period_size) *
-+ runtime->periods;
-+
-+ chip->dma.req_rx.buffer_size = buffer_size;
-+ chip->dma.req_rx.periods = runtime->periods;
-+
-+ BUG_ON(chip->dma.req_rx.buffer_size !=
-+ (chip->dma.req_rx.periods *
-+ frames_to_bytes(runtime, runtime->period_size)));
-+
-+ chip->dma.req_rx.buffer_start = runtime->dma_addr;
-+ chip->dma.req_rx.data_reg = (dma_addr_t)(chip->regs + AC97C_CARHR + 2);
-+ chip->dma.req_rx.periph_id = chip->dma.rx_periph_id;
-+ chip->dma.req_rx.direction = DMA_DIR_PERIPH_TO_MEM;
-+ chip->dma.req_rx.width = DMA_WIDTH_16BIT;
-+ chip->dma.req_rx.dev_id = chip;
-+
-+ return 0;
-+}
-+
-+ static int
-+snd_atmel_ac97_playback_trigger(struct snd_pcm_substream *substream, int cmd)
-+{
-+ struct atmel_ac97 *chip = snd_pcm_substream_chip(substream);
-+ unsigned long camr;
-+ int flags, err = 0;
-+
-+ spin_lock_irqsave(&chip->lock, flags);
-+ camr = ac97c_readl(chip, CAMR);
-+
-+ switch (cmd) {
-+ case SNDRV_PCM_TRIGGER_START:
-+ err = dma_prepare_request_cyclic(chip->dma.req_tx.req.dmac,
-+ &chip->dma.req_tx);
-+ dma_start_request(chip->dma.req_tx.req.dmac,
-+ chip->dma.req_tx.req.channel);
-+ camr |= AC97C_CMR_CENA;
-+ break;
-+ case SNDRV_PCM_TRIGGER_STOP:
-+ err = dma_stop_request(chip->dma.req_tx.req.dmac,
-+ chip->dma.req_tx.req.channel);
-+ if (chip->opened <= 1)
-+ camr &= ~AC97C_CMR_CENA;
-+ break;
-+ default:
-+ err = -EINVAL;
-+ break;
-+ }
-+
-+ ac97c_writel(chip, CAMR, camr);
-+
-+ spin_unlock_irqrestore(&chip->lock, flags);
-+ return err;
-+}
-+
-+ static int
-+snd_atmel_ac97_capture_trigger(struct snd_pcm_substream *substream, int cmd)
-+{
-+ struct atmel_ac97 *chip = snd_pcm_substream_chip(substream);
-+ unsigned long camr;
-+ int flags, err = 0;
-+
-+ spin_lock_irqsave(&chip->lock, flags);
-+ camr = ac97c_readl(chip, CAMR);
-+
-+ switch (cmd) {
-+ case SNDRV_PCM_TRIGGER_START:
-+ err = dma_prepare_request_cyclic(chip->dma.req_rx.req.dmac,
-+ &chip->dma.req_rx);
-+ dma_start_request(chip->dma.req_rx.req.dmac,
-+ chip->dma.req_rx.req.channel);
-+ camr |= AC97C_CMR_CENA;
-+ break;
-+ case SNDRV_PCM_TRIGGER_STOP:
-+ err = dma_stop_request(chip->dma.req_rx.req.dmac,
-+ chip->dma.req_rx.req.channel);
-+ mutex_lock(&opened_mutex);
-+ if (chip->opened <= 1)
-+ camr &= ~AC97C_CMR_CENA;
-+ mutex_unlock(&opened_mutex);
-+ break;
-+ default:
-+ err = -EINVAL;
-+ break;
-+ }
-+
-+ ac97c_writel(chip, CAMR, camr);
-+
-+ spin_unlock_irqrestore(&chip->lock, flags);
-+ return err;
-+}
-+
-+ static snd_pcm_uframes_t
-+snd_atmel_ac97_playback_pointer(struct snd_pcm_substream *substream)
-+{
-+ struct atmel_ac97 *chip = snd_pcm_substream_chip(substream);
-+ struct snd_pcm_runtime *runtime = substream->runtime;
-+ snd_pcm_uframes_t pos;
-+ unsigned long bytes;
-+
-+ bytes = (dma_get_current_pos
-+ (chip->dma.req_tx.req.dmac,
-+ chip->dma.req_tx.req.channel) - runtime->dma_addr);
-+ pos = bytes_to_frames(runtime, bytes);
-+ if (pos >= runtime->buffer_size)
-+ pos -= runtime->buffer_size;
-+
-+ return pos;
-+}
-+
-+ static snd_pcm_uframes_t
-+snd_atmel_ac97_capture_pointer(struct snd_pcm_substream *substream)
-+{
-+ struct atmel_ac97 *chip = snd_pcm_substream_chip(substream);
-+ struct snd_pcm_runtime *runtime = substream->runtime;
-+ snd_pcm_uframes_t pos;
-+ unsigned long bytes;
-+
-+ bytes = (dma_get_current_pos
-+ (chip->dma.req_rx.req.dmac,
-+ chip->dma.req_rx.req.channel)
-+ - runtime->dma_addr);
-+ pos = bytes_to_frames(runtime, bytes);
-+ if (pos >= runtime->buffer_size)
-+ pos -= runtime->buffer_size;
-+
-+
-+ return pos;
-+}
-+
-+static struct snd_pcm_ops atmel_ac97_playback_ops = {
-+ .open = snd_atmel_ac97_playback_open,
-+ .close = snd_atmel_ac97_playback_close,
-+ .ioctl = snd_pcm_lib_ioctl,
-+ .hw_params = snd_atmel_ac97_playback_hw_params,
-+ .hw_free = snd_atmel_ac97_playback_hw_free,
-+ .prepare = snd_atmel_ac97_playback_prepare,
-+ .trigger = snd_atmel_ac97_playback_trigger,
-+ .pointer = snd_atmel_ac97_playback_pointer,
-+};
-+
-+static struct snd_pcm_ops atmel_ac97_capture_ops = {
-+ .open = snd_atmel_ac97_capture_open,
-+ .close = snd_atmel_ac97_capture_close,
-+ .ioctl = snd_pcm_lib_ioctl,
-+ .hw_params = snd_atmel_ac97_capture_hw_params,
-+ .hw_free = snd_atmel_ac97_capture_hw_free,
-+ .prepare = snd_atmel_ac97_capture_prepare,
-+ .trigger = snd_atmel_ac97_capture_trigger,
-+ .pointer = snd_atmel_ac97_capture_pointer,
-+};
-+
-+static struct ac97_pcm atmel_ac97_pcm_defs[] __devinitdata = {
-+ /* Playback */
-+ {
-+ .exclusive = 1,
-+ .r = { {
-+ .slots = ((1 << AC97_SLOT_PCM_LEFT)
-+ | (1 << AC97_SLOT_PCM_RIGHT)
-+ | (1 << AC97_SLOT_PCM_CENTER)
-+ | (1 << AC97_SLOT_PCM_SLEFT)
-+ | (1 << AC97_SLOT_PCM_SRIGHT)
-+ | (1 << AC97_SLOT_LFE)),
-+ } }
-+ },
-+ /* PCM in */
-+ {
-+ .stream = 1,
-+ .exclusive = 1,
-+ .r = { {
-+ .slots = ((1 << AC97_SLOT_PCM_LEFT)
-+ | (1 << AC97_SLOT_PCM_RIGHT)),
-+ } }
-+ },
-+ /* Mic in */
-+ {
-+ .stream = 1,
-+ .exclusive = 1,
-+ .r = { {
-+ .slots = (1<<AC97_SLOT_MIC),
-+ } }
-+ },
-+};
-+
-+static int __devinit snd_atmel_ac97_pcm_new(struct atmel_ac97 *chip)
-+{
-+ struct snd_pcm *pcm;
-+ int err;
-+
-+ err = snd_ac97_pcm_assign(chip->ac97_bus,
-+ ARRAY_SIZE(atmel_ac97_pcm_defs),
-+ atmel_ac97_pcm_defs);
-+ if (err)
-+ return err;
-+
-+ err = snd_pcm_new(chip->card, "Atmel-AC97", 0, 1, 1, &pcm);
-+ if (err)
-+ return err;
-+
-+ snd_pcm_set_ops(pcm, SNDRV_PCM_STREAM_PLAYBACK,
-+ &atmel_ac97_playback_ops);
-+
-+ snd_pcm_set_ops(pcm, SNDRV_PCM_STREAM_CAPTURE,
-+ &atmel_ac97_capture_ops);
-+
-+ snd_pcm_lib_preallocate_pages_for_all(pcm, SNDRV_DMA_TYPE_DEV,
-+ &chip->pdev->dev,
-+ 128 * 1024, 128 * 1024);
-+
-+ pcm->private_data = chip;
-+ pcm->info_flags = 0;
-+ strcpy(pcm->name, "Atmel-AC97");
-+ chip->pcm = pcm;
-+
-+ return 0;
-+}
-+
-+/*
-+ * Mixer part.
-+ */
-+static int snd_atmel_ac97_mixer_new(struct atmel_ac97 *chip)
-+{
-+ int err;
-+ struct snd_ac97_template template;
-+
-+ memset(&template, 0, sizeof(template));
-+ template.private_data = chip;
-+ err = snd_ac97_mixer(chip->ac97_bus, &template, &chip->ac97);
-+
-+ return err;
-+}
-+
-+static void atmel_ac97_error(struct dma_request *_req)
-+{
-+ struct dma_request_cyclic *req = to_dma_request_cyclic(_req);
-+ struct atmel_ac97 *chip = req->dev_id;
-+
-+ dev_dbg(&chip->pdev->dev, "DMA Controller error, channel %d\n",
-+ req->req.channel);
-+}
-+
-+static void atmel_ac97_block_complete(struct dma_request *_req)
-+{
-+ struct dma_request_cyclic *req = to_dma_request_cyclic(_req);
-+ struct atmel_ac97 *chip = req->dev_id;
-+ if (req->periph_id == chip->dma.tx_periph_id)
-+ snd_pcm_period_elapsed(chip->playback_substream);
-+ else
-+ snd_pcm_period_elapsed(chip->capture_substream);
-+}
-+
-+/*
-+ * Codec part.
-+ */
-+static void snd_atmel_ac97_write(struct snd_ac97 *ac97, unsigned short reg,
-+ unsigned short val)
-+{
-+ struct atmel_ac97 *chip = get_chip(ac97);
-+ unsigned long word;
-+ int timeout = 40;
-+
-+ word = (reg & 0x7f) << 16 | val;
-+
-+ do {
-+ if (ac97c_readl(chip, COSR) & AC97C_CSR_TXRDY) {
-+ ac97c_writel(chip, COTHR, word);
-+ return;
-+ }
-+ udelay(1);
-+ } while (--timeout);
-+
-+ dev_dbg(&chip->pdev->dev, "codec write timeout\n");
-+}
-+
-+static unsigned short snd_atmel_ac97_read(struct snd_ac97 *ac97,
-+ unsigned short reg)
-+{
-+ struct atmel_ac97 *chip = get_chip(ac97);
-+ unsigned long word;
-+ int timeout = 40;
-+ int write = 10;
-+
-+ word = (0x80 | (reg & 0x7f)) << 16;
-+
-+ if ((ac97c_readl(chip, COSR) & AC97C_CSR_RXRDY) != 0)
-+ ac97c_readl(chip, CORHR);
-+
-+retry_write:
-+ timeout = 40;
-+
-+ do {
-+ if ((ac97c_readl(chip, COSR) & AC97C_CSR_TXRDY) != 0) {
-+ ac97c_writel(chip, COTHR, word);
-+ goto read_reg;
-+ }
-+ mdelay(10);
-+ } while (--timeout);
-+
-+ if (!--write)
-+ goto timed_out;
-+ goto retry_write;
-+
-+read_reg:
-+ do {
-+ if ((ac97c_readl(chip, COSR) & AC97C_CSR_RXRDY) != 0) {
-+ unsigned short val = ac97c_readl(chip, CORHR);
-+ return val;
-+ }
-+ mdelay(10);
-+ } while (--timeout);
-+
-+ if (!--write)
-+ goto timed_out;
-+ goto retry_write;
-+
-+timed_out:
-+ dev_dbg(&chip->pdev->dev, "codec read timeout\n");
-+ return 0xffff;
-+}
-+
-+static void snd_atmel_ac97_reset(struct atmel_ac97 *chip)
-+{
-+ ac97c_writel(chip, MR, AC97C_MR_WRST);
-+ mdelay(1);
-+ ac97c_writel(chip, MR, AC97C_MR_ENA);
-+}
-+
-+static void snd_atmel_ac97_destroy(struct snd_card *card)
-+{
-+ struct atmel_ac97 *chip = get_chip(card);
-+
-+ if (chip->regs)
-+ iounmap(chip->regs);
-+
-+ if (chip->mck) {
-+ clk_disable(chip->mck);
-+ clk_put(chip->mck);
-+ }
-+
-+ if (chip->dma.req_tx.req.dmac) {
-+ dma_release_channel(chip->dma.req_tx.req.dmac,
-+ chip->dma.req_tx.req.channel);
-+ }
-+ if (chip->dma.req_rx.req.dmac) {
-+ dma_release_channel(chip->dma.req_rx.req.dmac,
-+ chip->dma.req_rx.req.channel);
-+ }
-+}
-+
-+static int __devinit snd_atmel_ac97_create(struct snd_card *card,
-+ struct platform_device *pdev)
-+{
-+ static struct snd_ac97_bus_ops ops = {
-+ .write = snd_atmel_ac97_write,
-+ .read = snd_atmel_ac97_read,
-+ };
-+ struct atmel_ac97 *chip = get_chip(card);
-+ struct resource *regs;
-+ struct clk *mck;
-+ int err;
-+
-+ regs = platform_get_resource(pdev, IORESOURCE_MEM, 0);
-+ if (!regs)
-+ return -ENXIO;
-+
-+ mck = clk_get(&pdev->dev, "pclk");
-+ if (IS_ERR(mck))
-+ return PTR_ERR(mck);
-+ clk_enable(mck);
-+ chip->mck = mck;
-+
-+ card->private_free = snd_atmel_ac97_destroy;
-+
-+ spin_lock_init(&chip->lock);
-+ chip->card = card;
-+ chip->pdev = pdev;
-+
-+ chip->regs = ioremap(regs->start, regs->end - regs->start + 1);
-+ if (!chip->regs)
-+ return -ENOMEM;
-+
-+ snd_card_set_dev(card, &pdev->dev);
-+
-+ err = snd_ac97_bus(card, 0, &ops, chip, &chip->ac97_bus);
-+
-+ return err;
-+}
-+
-+static int __devinit snd_atmel_ac97_probe(struct platform_device *pdev)
-+{
-+ static int dev;
-+ struct snd_card *card;
-+ struct atmel_ac97 *chip;
-+ int err;
-+ int ch;
-+
-+ mutex_init(&opened_mutex);
-+
-+ err = -ENOMEM;
-+ card = snd_card_new(SNDRV_DEFAULT_IDX1, SNDRV_DEFAULT_STR1,
-+ THIS_MODULE, sizeof(struct atmel_ac97));
-+ if (!card)
-+ goto out;
-+ chip = get_chip(card);
-+
-+ err = snd_atmel_ac97_create(card, pdev);
-+ if (err)
-+ goto out_free_card;
-+
-+ snd_atmel_ac97_reset(chip);
-+
-+ err = snd_atmel_ac97_mixer_new(chip);
-+ if (err)
-+ goto out_free_card;
-+
-+ err = snd_atmel_ac97_pcm_new(chip);
-+ if (err)
-+ goto out_free_card;
-+
-+ /* TODO: Get this information from the platform device */
-+ chip->dma.req_tx.req.dmac = find_dma_controller(0);
-+ if (!chip->dma.req_tx.req.dmac) {
-+ dev_dbg(&chip->pdev->dev, "DMA controller for TX missing\n");
-+ err = -ENODEV;
-+ goto out_free_card;
-+ }
-+ chip->dma.req_rx.req.dmac = find_dma_controller(0);
-+ if (!chip->dma.req_rx.req.dmac) {
-+ dev_dbg(&chip->pdev->dev, "DMA controller for RX missing\n");
-+ err = -ENODEV;
-+ goto out_free_card;
-+ }
-+
-+ chip->dma.rx_periph_id = 3;
-+ chip->dma.tx_periph_id = 4;
-+
-+ ch = dma_alloc_channel(chip->dma.req_tx.req.dmac);
-+ if (ch < 0) {
-+ dev_dbg(&chip->pdev->dev,
-+ "could not allocate TX DMA channel\n");
-+ err = ch;
-+ goto out_free_card;
-+ }
-+ chip->dma.req_tx.req.channel = ch;
-+ chip->dma.req_tx.width = DMA_WIDTH_16BIT;
-+ chip->dma.req_tx.req.block_complete = atmel_ac97_block_complete;
-+ chip->dma.req_tx.req.error = atmel_ac97_error;
-+
-+ ch = dma_alloc_channel(chip->dma.req_rx.req.dmac);
-+ if (ch < 0) {
-+ dev_dbg(&chip->pdev->dev,
-+ "could not allocate RX DMA channel\n");
-+ err = ch;
-+ goto out_free_card;
-+ }
-+ chip->dma.req_rx.req.channel = ch;
-+ chip->dma.req_rx.width = DMA_WIDTH_16BIT;
-+ chip->dma.req_rx.req.block_complete = atmel_ac97_block_complete;
-+ chip->dma.req_rx.req.error = atmel_ac97_error;
-+
-+ strcpy(card->driver, "atmel_ac97c");
-+ strcpy(card->shortname, "atmel_ac97c");
-+ sprintf(card->longname, "Atmel AVR32 AC97 controller");
-+
-+ err = snd_card_register(card);
-+ if (err)
-+ goto out_free_card;
-+
-+ platform_set_drvdata(pdev, card);
-+ dev++;
-+
-+ dev_info(&pdev->dev, "Atmel AVR32 AC97 controller at 0x%p\n",
-+ chip->regs);
-+
-+ return 0;
-+
-+out_free_card:
-+ snd_card_free(card);
-+out:
-+ return err;
-+}
-+
-+#ifdef CONFIG_PM
-+ static int
-+snd_atmel_ac97_suspend(struct platform_device *pdev, pm_message_t msg)
-+{
-+ struct snd_card *card = platform_get_drvdata(pdev);
-+ struct atmel_ac97 *chip = card->private_data;
-+
-+ clk_disable(chip->mck);
-+
-+ return 0;
-+}
-+
-+static int snd_atmel_ac97_resume(struct platform_device *pdev)
-+{
-+ struct snd_card *card = dev_get_drvdata(pdev);
-+ struct atmel_ac97 *chip = card->private_data;
-+
-+ clk_enable(chip->mck);
-+
-+ return 0;
-+}
-+#else
-+#define snd_atmel_ac97_suspend NULL
-+#define snd_atmel_ac97_resume NULL
-+#endif
-+
-+static int __devexit snd_atmel_ac97_remove(struct platform_device *pdev)
-+{
-+ struct snd_card *card = platform_get_drvdata(pdev);
-+
-+ snd_card_free(card);
-+ platform_set_drvdata(pdev, NULL);
-+ return 0;
-+}
-+
-+static struct platform_driver atmel_ac97_driver = {
-+ .remove = __devexit_p(snd_atmel_ac97_remove),
-+ .driver = {
-+ .name = "atmel_ac97c",
-+ },
-+ .suspend = snd_atmel_ac97_suspend,
-+ .resume = snd_atmel_ac97_resume,
-+};
-+
-+static int __init atmel_ac97_init(void)
-+{
-+ return platform_driver_probe(&atmel_ac97_driver,
-+ snd_atmel_ac97_probe);
-+}
-+module_init(atmel_ac97_init);
-+
-+static void __exit atmel_ac97_exit(void)
-+{
-+ platform_driver_unregister(&atmel_ac97_driver);
-+}
-+module_exit(atmel_ac97_exit);
-+
-+MODULE_LICENSE("GPL");
-+MODULE_DESCRIPTION("Driver for Atmel AC97 Controller");
-+MODULE_AUTHOR("Haavard Skinnemoen <hskinnemoen@atmel.com>");
-diff -Nrup linux-2.6.24/sound/avr32/ac97c.h linux-avr32/sound/avr32/ac97c.h
---- linux-2.6.24/sound/avr32/ac97c.h 1969-12-31 19:00:00.000000000 -0500
-+++ linux-avr32/sound/avr32/ac97c.h 2008-02-01 14:51:48.000000000 -0500
-@@ -0,0 +1,71 @@
-+/*
-+ * Register definitions for the Atmel AC97 Controller.
-+ *
-+ * Copyright (C) 2005-2006 Atmel Corporation
-+ *
-+ * This program is free software; you can redistribute it and/or modify
-+ * it under the terms of the GNU General Public License version 2 as
-+ * published by the Free Software Foundation.
-+ */
-+#ifndef __SOUND_AVR32_AC97C_H
-+#define __SOUND_AVR32_AC97C_H
-+
-+#define AC97C_MR 0x08
-+#define AC97C_ICA 0x10
-+#define AC97C_OCA 0x14
-+#define AC97C_CARHR 0x20
-+#define AC97C_CATHR 0x24
-+#define AC97C_CASR 0x28
-+#define AC97C_CAMR 0x2c
-+#define AC97C_CBRHR 0x30
-+#define AC97C_CBTHR 0x34
-+#define AC97C_CBSR 0x38
-+#define AC97C_CBMR 0x3c
-+#define AC97C_CORHR 0x40
-+#define AC97C_COTHR 0x44
-+#define AC97C_COSR 0x48
-+#define AC97C_COMR 0x4c
-+#define AC97C_SR 0x50
-+#define AC97C_IER 0x54
-+#define AC97C_IDR 0x58
-+#define AC97C_IMR 0x5c
-+#define AC97C_VERSION 0xfc
-+
-+#define AC97C_CATPR PDC_TPR
-+#define AC97C_CATCR PDC_TCR
-+#define AC97C_CATNPR PDC_TNPR
-+#define AC97C_CATNCR PDC_TNCR
-+#define AC97C_CARPR PDC_RPR
-+#define AC97C_CARCR PDC_RCR
-+#define AC97C_CARNPR PDC_RNPR
-+#define AC97C_CARNCR PDC_RNCR
-+#define AC97C_PTCR PDC_PTCR
-+
-+#define AC97C_MR_ENA (1 << 0)
-+#define AC97C_MR_WRST (1 << 1)
-+#define AC97C_MR_VRA (1 << 2)
-+
-+#define AC97C_CSR_TXRDY (1 << 0)
-+#define AC97C_CSR_UNRUN (1 << 2)
-+#define AC97C_CSR_RXRDY (1 << 4)
-+#define AC97C_CSR_ENDTX (1 << 10)
-+#define AC97C_CSR_ENDRX (1 << 14)
-+
-+#define AC97C_CMR_SIZE_20 (0 << 16)
-+#define AC97C_CMR_SIZE_18 (1 << 16)
-+#define AC97C_CMR_SIZE_16 (2 << 16)
-+#define AC97C_CMR_SIZE_10 (3 << 16)
-+#define AC97C_CMR_CEM_LITTLE (1 << 18)
-+#define AC97C_CMR_CEM_BIG (0 << 18)
-+#define AC97C_CMR_CENA (1 << 21)
-+#define AC97C_CMR_PDCEN (1 << 22)
-+
-+#define AC97C_SR_CAEVT (1 << 3)
-+
-+#define AC97C_CH_ASSIGN(slot, channel) \
-+ (AC97C_CHANNEL_##channel << (3 * (AC97_SLOT_##slot - 3)))
-+#define AC97C_CHANNEL_NONE 0x0
-+#define AC97C_CHANNEL_A 0x1
-+#define AC97C_CHANNEL_B 0x2
-+
-+#endif /* __SOUND_AVR32_AC97C_H */
-diff -Nrup linux-2.6.24/sound/avr32/Kconfig linux-avr32/sound/avr32/Kconfig
---- linux-2.6.24/sound/avr32/Kconfig 1969-12-31 19:00:00.000000000 -0500
-+++ linux-avr32/sound/avr32/Kconfig 2008-02-01 14:51:48.000000000 -0500
-@@ -0,0 +1,11 @@
-+menu "AVR32 devices"
-+ depends on SND != n && AVR32
-+
-+config SND_ATMEL_AC97
-+ tristate "Atmel AC97 Controller Driver"
-+ select SND_PCM
-+ select SND_AC97_CODEC
-+ help
-+ ALSA sound driver for the Atmel AC97 controller.
-+
-+endmenu
-diff -Nrup linux-2.6.24/sound/avr32/Makefile linux-avr32/sound/avr32/Makefile
---- linux-2.6.24/sound/avr32/Makefile 1969-12-31 19:00:00.000000000 -0500
-+++ linux-avr32/sound/avr32/Makefile 2008-02-01 14:51:48.000000000 -0500
-@@ -0,0 +1,3 @@
-+snd-atmel-ac97-objs := ac97c.o
-+
-+obj-$(CONFIG_SND_ATMEL_AC97) += snd-atmel-ac97.o
-diff -Nrup linux-2.6.24/sound/Kconfig linux-avr32/sound/Kconfig
---- linux-2.6.24/sound/Kconfig 2008-01-24 17:58:37.000000000 -0500
-+++ linux-avr32/sound/Kconfig 2008-02-01 14:51:48.000000000 -0500
-@@ -63,6 +63,8 @@ source "sound/aoa/Kconfig"
-
- source "sound/arm/Kconfig"
-
-+source "sound/avr32/Kconfig"
-+
- if SPI
- source "sound/spi/Kconfig"
- endif
-diff -Nrup linux-2.6.24/sound/Makefile linux-avr32/sound/Makefile
---- linux-2.6.24/sound/Makefile 2008-01-24 17:58:37.000000000 -0500
-+++ linux-avr32/sound/Makefile 2008-02-01 14:51:48.000000000 -0500
-@@ -6,7 +6,7 @@ obj-$(CONFIG_SOUND_PRIME) += sound_firmw
- obj-$(CONFIG_SOUND_PRIME) += oss/
- obj-$(CONFIG_DMASOUND) += oss/
- obj-$(CONFIG_SND) += core/ i2c/ drivers/ isa/ pci/ ppc/ arm/ sh/ synth/ usb/ \
-- sparc/ spi/ parisc/ pcmcia/ mips/ soc/
-+ sparc/ spi/ parisc/ pcmcia/ mips/ soc/ avr32/
- obj-$(CONFIG_SND_AOA) += aoa/
-
- # This one must be compilable even if sound is configured out
-diff -Nrup linux-2.6.24/sound/oss/at32_abdac.c linux-avr32/sound/oss/at32_abdac.c
---- linux-2.6.24/sound/oss/at32_abdac.c 1969-12-31 19:00:00.000000000 -0500
-+++ linux-avr32/sound/oss/at32_abdac.c 2008-02-01 14:51:49.000000000 -0500
-@@ -0,0 +1,722 @@
-+/*
-+ * OSS Sound Driver for the Atmel AT32 on-chip DAC.
-+ *
-+ * Copyright (C) 2006 Atmel Corporation
-+ *
-+ * This program is free software; you can redistribute it and/or modify
-+ * it under the terms of the GNU General Public License version 2 as
-+ * published by the Free Software Foundation.
-+ */
-+#include <linux/clk.h>
-+#include <linux/dma-mapping.h>
-+#include <linux/fs.h>
-+#include <linux/init.h>
-+#include <linux/interrupt.h>
-+#include <linux/kernel.h>
-+#include <linux/module.h>
-+#include <linux/platform_device.h>
-+#include <linux/sound.h>
-+#include <linux/soundcard.h>
-+
-+#include <asm/byteorder.h>
-+#include <asm/dma-controller.h>
-+#include <asm/io.h>
-+#include <asm/uaccess.h>
-+
-+/* We want to use the "bizarre" swap-bytes-in-each-halfword macro */
-+#include <linux/byteorder/swabb.h>
-+
-+#include "at32_abdac.h"
-+
-+#define DMA_BUFFER_SIZE 32768
-+#define DMA_PERIOD_SHIFT 10
-+#define DMA_PERIOD_SIZE (1 << DMA_PERIOD_SHIFT)
-+#define DMA_WRITE_THRESHOLD DMA_PERIOD_SIZE
-+
-+struct sound_settings {
-+ unsigned int format;
-+ unsigned int channels;
-+ unsigned int sample_rate;
-+ /* log2(bytes per sample) */
-+ unsigned int input_order;
-+};
-+
-+struct at32_dac {
-+ spinlock_t lock;
-+ void __iomem *regs;
-+
-+ /* head and tail refer to number of words */
-+ struct {
-+ u32 *buf;
-+ int head;
-+ int tail;
-+ } dma;
-+
-+ struct semaphore sem;
-+ wait_queue_head_t write_wait;
-+
-+ /*
-+ * Read at most ucount bytes from ubuf, translate to 2-channel
-+ * signed 16-bit big endian format and write to the DMA buffer
-+ * as long as there is room left. Return the number of bytes
-+ * successfully copied from ubuf, or -EFAULT if the first
-+ * sample from ubuf couldn't be read. This function is not
-+ * called unless there is room for at least one sample (4
-+ * bytes) in the DMA buffer.
-+ */
-+ ssize_t (*trans)(struct at32_dac *dac, const char __user *ubuf,
-+ size_t ucount);
-+
-+ struct sound_settings dsp_settings;
-+ struct dma_request_cyclic req;
-+
-+ struct clk *mck;
-+ struct clk *sample_clk;
-+ struct platform_device *pdev;
-+ int busy;
-+ int playing;
-+ int dev_dsp;
-+};
-+static struct at32_dac *the_dac;
-+
-+static inline unsigned int abdac_get_head(struct at32_dac *dac)
-+{
-+ return dac->dma.head & ((DMA_BUFFER_SIZE / 4) - 1);
-+}
-+
-+static inline unsigned int abdac_get_tail(struct at32_dac *dac)
-+{
-+ return dac->dma.tail & ((DMA_BUFFER_SIZE / 4) - 1);
-+}
-+
-+static inline unsigned int abdac_dma_space(struct at32_dac *dac)
-+{
-+ unsigned int space;
-+
-+ space = ((dac->dma.tail - dac->dma.head - 1)
-+ & ((DMA_BUFFER_SIZE / 4) - 1));
-+ return space;
-+}
-+
-+static void abdac_update_dma_tail(struct at32_dac *dac)
-+{
-+ dma_addr_t dma_addr;
-+ unsigned int new_tail;
-+
-+ if (dac->playing) {
-+ dma_addr = dma_get_current_pos(dac->req.req.dmac,
-+ dac->req.req.channel);
-+ new_tail = (dma_addr - dac->req.buffer_start) / 4;
-+ if (new_tail >= dac->dma.head
-+ && (dac->dma.tail < dac->dma.head
-+ || dac->dma.tail > new_tail))
-+ dev_notice(&dac->pdev->dev, "DMA underrun detected!\n");
-+ dac->dma.tail = new_tail;
-+ dev_dbg(&dac->pdev->dev, "update tail: 0x%x - 0x%x = %u\n",
-+ dma_addr, dac->req.buffer_start, dac->dma.tail);
-+ }
-+}
-+
-+static int abdac_start(struct at32_dac *dac)
-+{
-+ int ret;
-+
-+ if (dac->playing)
-+ return 0;
-+
-+ memset(dac->dma.buf, 0, DMA_BUFFER_SIZE);
-+
-+ clk_enable(dac->sample_clk);
-+
-+ ret = dma_prepare_request_cyclic(dac->req.req.dmac, &dac->req);
-+ if (ret)
-+ goto out_stop_clock;
-+
-+ dev_dbg(&dac->pdev->dev, "starting DMA...\n");
-+ ret = dma_start_request(dac->req.req.dmac, dac->req.req.channel);
-+ if (ret)
-+ goto out_stop_request;
-+
-+ dac_writel(dac, CTRL, DAC_BIT(EN));
-+ dac->playing = 1;
-+
-+ return 0;
-+
-+out_stop_request:
-+ dma_stop_request(dac->req.req.dmac,
-+ dac->req.req.channel);
-+out_stop_clock:
-+ clk_disable(dac->sample_clk);
-+ return ret;
-+}
-+
-+static int abdac_stop(struct at32_dac *dac)
-+{
-+ if (dac->playing) {
-+ dma_stop_request(dac->req.req.dmac, dac->req.req.channel);
-+ dac_writel(dac, DATA, 0);
-+ dac_writel(dac, CTRL, 0);
-+ dac->playing = 0;
-+ clk_disable(dac->sample_clk);
-+ }
-+
-+ return 0;
-+}
-+
-+static int abdac_dma_prepare(struct at32_dac *dac)
-+{
-+ dac->dma.buf = dma_alloc_coherent(&dac->pdev->dev, DMA_BUFFER_SIZE,
-+ &dac->req.buffer_start, GFP_KERNEL);
-+ if (!dac->dma.buf)
-+ return -ENOMEM;
-+
-+ dac->dma.head = dac->dma.tail = 0;
-+ dac->req.periods = DMA_BUFFER_SIZE / DMA_PERIOD_SIZE;
-+ dac->req.buffer_size = DMA_BUFFER_SIZE;
-+
-+ return 0;
-+}
-+
-+static void abdac_dma_cleanup(struct at32_dac *dac)
-+{
-+ if (dac->dma.buf)
-+ dma_free_coherent(&dac->pdev->dev, DMA_BUFFER_SIZE,
-+ dac->dma.buf, dac->req.buffer_start);
-+ dac->dma.buf = NULL;
-+}
-+
-+static void abdac_dma_block_complete(struct dma_request *req)
-+{
-+ struct dma_request_cyclic *creq = to_dma_request_cyclic(req);
-+ struct at32_dac *dac = container_of(creq, struct at32_dac, req);
-+
-+ wake_up(&dac->write_wait);
-+}
-+
-+static void abdac_dma_error(struct dma_request *req)
-+{
-+ struct dma_request_cyclic *creq = to_dma_request_cyclic(req);
-+ struct at32_dac *dac = container_of(creq, struct at32_dac, req);
-+
-+ dev_err(&dac->pdev->dev, "DMA error\n");
-+}
-+
-+static irqreturn_t abdac_interrupt(int irq, void *dev_id)
-+{
-+ struct at32_dac *dac = dev_id;
-+ u32 status;
-+
-+ status = dac_readl(dac, INT_STATUS);
-+ if (status & DAC_BIT(UNDERRUN)) {
-+ dev_err(&dac->pdev->dev, "Underrun detected!\n");
-+ dac_writel(dac, INT_CLR, DAC_BIT(UNDERRUN));
-+ } else {
-+ dev_err(&dac->pdev->dev, "Spurious interrupt (status=0x%x)\n",
-+ status);
-+ dac_writel(dac, INT_CLR, status);
-+ }
-+
-+ return IRQ_HANDLED;
-+}
-+
-+static ssize_t trans_s16be(struct at32_dac *dac, const char __user *ubuf,
-+ size_t ucount)
-+{
-+ ssize_t ret;
-+
-+ if (dac->dsp_settings.channels == 2) {
-+ const u32 __user *up = (const u32 __user *)ubuf;
-+ u32 sample;
-+
-+ for (ret = 0; ret < (ssize_t)(ucount - 3); ret += 4) {
-+ if (!abdac_dma_space(dac))
-+ break;
-+
-+ if (unlikely(__get_user(sample, up++))) {
-+ if (ret == 0)
-+ ret = -EFAULT;
-+ break;
-+ }
-+ dac->dma.buf[abdac_get_head(dac)] = sample;
-+ dac->dma.head++;
-+ }
-+ } else {
-+ const u16 __user *up = (const u16 __user *)ubuf;
-+ u16 sample;
-+
-+ for (ret = 0; ret < (ssize_t)(ucount - 1); ret += 2) {
-+ if (!abdac_dma_space(dac))
-+ break;
-+
-+ if (unlikely(__get_user(sample, up++))) {
-+ if (ret == 0)
-+ ret = -EFAULT;
-+ break;
-+ }
-+ dac->dma.buf[abdac_get_head(dac)]
-+ = (sample << 16) | sample;
-+ dac->dma.head++;
-+ }
-+ }
-+
-+ return ret;
-+}
-+
-+static ssize_t trans_s16le(struct at32_dac *dac, const char __user *ubuf,
-+ size_t ucount)
-+{
-+ ssize_t ret;
-+
-+ if (dac->dsp_settings.channels == 2) {
-+ const u32 __user *up = (const u32 __user *)ubuf;
-+ u32 sample;
-+
-+ for (ret = 0; ret < (ssize_t)(ucount - 3); ret += 4) {
-+ if (!abdac_dma_space(dac))
-+ break;
-+
-+ if (unlikely(__get_user(sample, up++))) {
-+ if (ret == 0)
-+ ret = -EFAULT;
-+ break;
-+ }
-+ /* Swap bytes in each halfword */
-+ dac->dma.buf[abdac_get_head(dac)] = swahb32(sample);
-+ dac->dma.head++;
-+ }
-+ } else {
-+ const u16 __user *up = (const u16 __user *)ubuf;
-+ u16 sample;
-+
-+ for (ret = 0; ret < (ssize_t)(ucount - 1); ret += 2) {
-+ if (!abdac_dma_space(dac))
-+ break;
-+
-+ if (unlikely(__get_user(sample, up++))) {
-+ if (ret == 0)
-+ ret = -EFAULT;
-+ break;
-+ }
-+ sample = swab16(sample);
-+ dac->dma.buf[abdac_get_head(dac)]
-+ = (sample << 16) | sample;
-+ dac->dma.head++;
-+ }
-+ }
-+
-+ return ret;
-+}
-+
-+static ssize_t abdac_dma_translate_from_user(struct at32_dac *dac,
-+ const char __user *buffer,
-+ size_t count)
-+{
-+ /* At least one buffer must be available at this point */
-+ dev_dbg(&dac->pdev->dev, "copying %zu bytes from user...\n", count);
-+
-+ return dac->trans(dac, buffer, count);
-+}
-+
-+static int abdac_set_format(struct at32_dac *dac, int format)
-+{
-+ unsigned int order;
-+
-+ switch (format) {
-+ case AFMT_S16_BE:
-+ order = 1;
-+ dac->trans = trans_s16be;
-+ break;
-+ case AFMT_S16_LE:
-+ order = 1;
-+ dac->trans = trans_s16le;
-+ break;
-+ default:
-+ dev_dbg(&dac->pdev->dev, "unsupported format: %d\n", format);
-+ return -EINVAL;
-+ }
-+
-+ if (dac->dsp_settings.channels == 2)
-+ order++;
-+
-+ dac->dsp_settings.input_order = order;
-+ dac->dsp_settings.format = format;
-+ return 0;
-+}
-+
-+static int abdac_set_sample_rate(struct at32_dac *dac, unsigned long rate)
-+{
-+ unsigned long new_rate;
-+ int ret;
-+
-+ ret = clk_set_rate(dac->sample_clk, 256 * rate);
-+ if (ret < 0)
-+ return ret;
-+
-+ /* TODO: mplayer seems to have a problem with this */
-+#if 0
-+ new_rate = clk_get_rate(dac->sample_clk);
-+ dac->dsp_settings.sample_rate = new_rate / 256;
-+#else
-+ dac->dsp_settings.sample_rate = rate;
-+#endif
-+
-+ return 0;
-+}
-+
-+static ssize_t abdac_dsp_write(struct file *file,
-+ const char __user *buffer,
-+ size_t count, loff_t *ppos)
-+{
-+ struct at32_dac *dac = file->private_data;
-+ DECLARE_WAITQUEUE(wait, current);
-+ unsigned int avail;
-+ ssize_t copied;
-+ ssize_t ret;
-+
-+ /* Avoid address space checking in the translation functions */
-+ if (!access_ok(buffer, count, VERIFY_READ))
-+ return -EFAULT;
-+
-+ down(&dac->sem);
-+
-+ if (!dac->dma.buf) {
-+ ret = abdac_dma_prepare(dac);
-+ if (ret)
-+ goto out;
-+ }
-+
-+ add_wait_queue(&dac->write_wait, &wait);
-+ ret = 0;
-+ while (count > 0) {
-+ do {
-+ abdac_update_dma_tail(dac);
-+ avail = abdac_dma_space(dac);
-+ set_current_state(TASK_INTERRUPTIBLE);
-+ if (avail >= DMA_WRITE_THRESHOLD)
-+ break;
-+
-+ if (file->f_flags & O_NONBLOCK) {
-+ if (!ret)
-+ ret = -EAGAIN;
-+ goto out;
-+ }
-+
-+ pr_debug("Going to wait (avail = %u, count = %zu)\n",
-+ avail, count);
-+
-+ up(&dac->sem);
-+ schedule();
-+ if (signal_pending(current)) {
-+ if (!ret)
-+ ret = -ERESTARTSYS;
-+ goto out_nosem;
-+ }
-+ down(&dac->sem);
-+ } while (1);
-+
-+ copied = abdac_dma_translate_from_user(dac, buffer, count);
-+ if (copied < 0) {
-+ if (!ret)
-+ ret = -EFAULT;
-+ goto out;
-+ }
-+
-+ abdac_start(dac);
-+
-+ count -= copied;
-+ ret += copied;
-+ }
-+
-+out:
-+ up(&dac->sem);
-+out_nosem:
-+ remove_wait_queue(&dac->write_wait, &wait);
-+ set_current_state(TASK_RUNNING);
-+ return ret;
-+}
-+
-+static int abdac_dsp_ioctl(struct inode *inode, struct file *file,
-+ unsigned int cmd, unsigned long arg)
-+{
-+ struct at32_dac *dac = file->private_data;
-+ int __user *up = (int __user *)arg;
-+ struct audio_buf_info abinfo;
-+ int val, ret;
-+
-+ switch (cmd) {
-+ case OSS_GETVERSION:
-+ return put_user(SOUND_VERSION, up);
-+
-+ case SNDCTL_DSP_SPEED:
-+ if (get_user(val, up))
-+ return -EFAULT;
-+ if (val >= 0) {
-+ abdac_stop(dac);
-+ ret = abdac_set_sample_rate(dac, val);
-+ if (ret)
-+ return ret;
-+ }
-+ return put_user(dac->dsp_settings.sample_rate, up);
-+
-+ case SNDCTL_DSP_STEREO:
-+ if (get_user(val, up))
-+ return -EFAULT;
-+ abdac_stop(dac);
-+ if (val && dac->dsp_settings.channels == 1)
-+ dac->dsp_settings.input_order++;
-+ else if (!val && dac->dsp_settings.channels != 1)
-+ dac->dsp_settings.input_order--;
-+ dac->dsp_settings.channels = val ? 2 : 1;
-+ return 0;
-+
-+ case SNDCTL_DSP_CHANNELS:
-+ if (get_user(val, up))
-+ return -EFAULT;
-+
-+ if (val) {
-+ if (val < 0 || val > 2)
-+ return -EINVAL;
-+
-+ abdac_stop(dac);
-+ dac->dsp_settings.input_order
-+ += val - dac->dsp_settings.channels;
-+ dac->dsp_settings.channels = val;
-+ }
-+ return put_user(val, (int *)arg);
-+
-+ case SNDCTL_DSP_GETFMTS:
-+ return put_user(AFMT_S16_BE | AFMT_S16_BE, up);
-+
-+ case SNDCTL_DSP_SETFMT:
-+ if (get_user(val, up))
-+ return -EFAULT;
-+
-+ if (val == AFMT_QUERY) {
-+ val = dac->dsp_settings.format;
-+ } else {
-+ ret = abdac_set_format(dac, val);
-+ if (ret)
-+ return ret;
-+ }
-+ return put_user(val, up);
-+
-+ case SNDCTL_DSP_GETOSPACE:
-+ abdac_update_dma_tail(dac);
-+ abinfo.fragsize = ((1 << dac->dsp_settings.input_order)
-+ * (DMA_PERIOD_SIZE / 4));
-+ abinfo.bytes = (abdac_dma_space(dac)
-+ << dac->dsp_settings.input_order);
-+ abinfo.fragstotal = ((DMA_BUFFER_SIZE * 4)
-+ >> (DMA_PERIOD_SHIFT
-+ + dac->dsp_settings.input_order));
-+ abinfo.fragments = ((abinfo.bytes
-+ >> dac->dsp_settings.input_order)
-+ / (DMA_PERIOD_SIZE / 4));
-+ pr_debug("fragments=%d fragstotal=%d fragsize=%d bytes=%d\n",
-+ abinfo.fragments, abinfo.fragstotal, abinfo.fragsize,
-+ abinfo.bytes);
-+ return copy_to_user(up, &abinfo, sizeof(abinfo)) ? -EFAULT : 0;
-+
-+ default:
-+ dev_dbg(&dac->pdev->dev, "Unimplemented ioctl cmd: 0x%x\n", cmd);
-+ return -EINVAL;
-+ }
-+}
-+
-+static int abdac_dsp_open(struct inode *inode, struct file *file)
-+{
-+ struct at32_dac *dac = the_dac;
-+ int ret;
-+
-+ if (file->f_mode & FMODE_READ)
-+ return -ENXIO;
-+
-+ down(&dac->sem);
-+ ret = -EBUSY;
-+ if (dac->busy)
-+ goto out;
-+
-+ dac->dma.head = dac->dma.tail = 0;
-+
-+ /* FIXME: What are the correct defaults? */
-+ dac->dsp_settings.channels = 2;
-+ abdac_set_format(dac, AFMT_S16_BE);
-+ ret = abdac_set_sample_rate(dac, 8000);
-+ if (ret)
-+ goto out;
-+
-+ file->private_data = dac;
-+ dac->busy = 1;
-+
-+ ret = 0;
-+
-+out:
-+ up(&dac->sem);
-+ return ret;
-+}
-+
-+static int abdac_dsp_release(struct inode *inode, struct file *file)
-+{
-+ struct at32_dac *dac = file->private_data;
-+
-+ down(&dac->sem);
-+
-+ abdac_stop(dac);
-+ abdac_dma_cleanup(dac);
-+ dac->busy = 0;
-+
-+ up(&dac->sem);
-+
-+ return 0;
-+}
-+
-+static struct file_operations abdac_dsp_fops = {
-+ .owner = THIS_MODULE,
-+ .llseek = no_llseek,
-+ .write = abdac_dsp_write,
-+ .ioctl = abdac_dsp_ioctl,
-+ .open = abdac_dsp_open,
-+ .release = abdac_dsp_release,
-+};
-+
-+static int __init abdac_probe(struct platform_device *pdev)
-+{
-+ struct at32_dac *dac;
-+ struct resource *regs;
-+ struct clk *mck;
-+ struct clk *sample_clk;
-+ int irq;
-+ int ret;
-+
-+ if (the_dac)
-+ return -EBUSY;
-+
-+ regs = platform_get_resource(pdev, IORESOURCE_MEM, 0);
-+ if (!regs)
-+ return -ENXIO;
-+ irq = platform_get_irq(pdev, 0);
-+ if (irq < 0)
-+ return irq;
-+
-+ mck = clk_get(&pdev->dev, "pclk");
-+ if (IS_ERR(mck))
-+ return PTR_ERR(mck);
-+ sample_clk = clk_get(&pdev->dev, "sample_clk");
-+ if (IS_ERR(sample_clk)) {
-+ ret = PTR_ERR(sample_clk);
-+ goto out_put_mck;
-+ }
-+ clk_enable(mck);
-+
-+ ret = -ENOMEM;
-+ dac = kzalloc(sizeof(struct at32_dac), GFP_KERNEL);
-+ if (!dac)
-+ goto out_disable_clk;
-+
-+ spin_lock_init(&dac->lock);
-+ init_MUTEX(&dac->sem);
-+ init_waitqueue_head(&dac->write_wait);
-+ dac->pdev = pdev;
-+ dac->mck = mck;
-+ dac->sample_clk = sample_clk;
-+
-+ dac->regs = ioremap(regs->start, regs->end - regs->start + 1);
-+ if (!dac->regs)
-+ goto out_free_dac;
-+
-+ ret = request_irq(irq, abdac_interrupt, 0, "dac", dac);
-+ if (ret)
-+ goto out_unmap_regs;
-+
-+ /* FIXME */
-+ dac->req.req.dmac = find_dma_controller(0);
-+ if (!dac->req.req.dmac)
-+ goto out_free_irq;
-+
-+ ret = dma_alloc_channel(dac->req.req.dmac);
-+ if (ret < 0)
-+ goto out_free_irq;
-+
-+ dac->req.req.channel = ret;
-+ dac->req.req.block_complete = abdac_dma_block_complete;
-+ dac->req.req.error = abdac_dma_error;
-+ dac->req.data_reg = regs->start + DAC_DATA;
-+ dac->req.periph_id = 2; /* FIXME */
-+ dac->req.direction = DMA_DIR_MEM_TO_PERIPH;
-+ dac->req.width = DMA_WIDTH_32BIT;
-+
-+ /* Make sure the DAC is silent and disabled */
-+ dac_writel(dac, DATA, 0);
-+ dac_writel(dac, CTRL, 0);
-+
-+ ret = register_sound_dsp(&abdac_dsp_fops, -1);
-+ if (ret < 0)
-+ goto out_free_dma;
-+ dac->dev_dsp = ret;
-+
-+ /* TODO: Register mixer */
-+
-+ the_dac = dac;
-+ platform_set_drvdata(pdev, dac);
-+
-+ return 0;
-+
-+out_free_dma:
-+ dma_release_channel(dac->req.req.dmac, dac->req.req.channel);
-+out_free_irq:
-+ free_irq(irq, dac);
-+out_unmap_regs:
-+ iounmap(dac->regs);
-+out_free_dac:
-+ kfree(dac);
-+out_disable_clk:
-+ clk_disable(mck);
-+ clk_put(sample_clk);
-+out_put_mck:
-+ clk_put(mck);
-+ return ret;
-+}
-+
-+static int __exit abdac_remove(struct platform_device *pdev)
-+{
-+ struct at32_dac *dac;
-+
-+ dac = platform_get_drvdata(pdev);
-+ if (dac) {
-+ unregister_sound_dsp(dac->dev_dsp);
-+ dma_release_channel(dac->req.req.dmac, dac->req.req.channel);
-+ free_irq(platform_get_irq(pdev, 0), dac);
-+ iounmap(dac->regs);
-+ clk_disable(dac->mck);
-+ clk_put(dac->sample_clk);
-+ clk_put(dac->mck);
-+ kfree(dac);
-+ platform_set_drvdata(pdev, NULL);
-+ the_dac = NULL;
-+ }
-+
-+ return 0;
-+}
-+
-+static struct platform_driver abdac_driver = {
-+ .remove = __exit_p(abdac_remove),
-+ .driver = {
-+ .name = "abdac",
-+ },
-+};
-+
-+static int __init abdac_init(void)
-+{
-+ return platform_driver_probe(&abdac_driver, abdac_probe);
-+}
-+module_init(abdac_init);
-+
-+static void __exit abdac_exit(void)
-+{
-+ platform_driver_unregister(&abdac_driver);
-+}
-+module_exit(abdac_exit);
-+
-+MODULE_AUTHOR("Haavard Skinnemoen <hskinnemoen@atmel.com>");
-+MODULE_DESCRIPTION("Sound Driver for the Atmel AT32 ABDAC");
-+MODULE_LICENSE("GPL");
-diff -Nrup linux-2.6.24/sound/oss/at32_abdac.h linux-avr32/sound/oss/at32_abdac.h
---- linux-2.6.24/sound/oss/at32_abdac.h 1969-12-31 19:00:00.000000000 -0500
-+++ linux-avr32/sound/oss/at32_abdac.h 2008-02-01 14:51:49.000000000 -0500
-@@ -0,0 +1,59 @@
-+/*
-+ * Register definitions for the Atmel AT32 on-chip DAC.
-+ *
-+ * Copyright (C) 2006 Atmel Corporation
-+ *
-+ * This program is free software; you can redistribute it and/or modify
-+ * it under the terms of the GNU General Public License version 2 as
-+ * published by the Free Software Foundation.
-+ */
-+#ifndef __SOUND_OSS_AT32_ABDAC_H__
-+#define __SOUND_OSS_AT32_ABDAC_H__
-+
-+/* DAC register offsets */
-+#define DAC_DATA 0x0000
-+#define DAC_CTRL 0x0008
-+#define DAC_INT_MASK 0x000c
-+#define DAC_INT_EN 0x0010
-+#define DAC_INT_DIS 0x0014
-+#define DAC_INT_CLR 0x0018
-+#define DAC_INT_STATUS 0x001c
-+#define DAC_PDC_DATA 0x0020
-+
-+/* Bitfields in CTRL */
-+#define DAC_SWAP_OFFSET 30
-+#define DAC_SWAP_SIZE 1
-+#define DAC_EN_OFFSET 31
-+#define DAC_EN_SIZE 1
-+
-+/* Bitfields in INT_MASK/INT_EN/INT_DIS/INT_STATUS/INT_CLR */
-+#define DAC_UNDERRUN_OFFSET 28
-+#define DAC_UNDERRUN_SIZE 1
-+#define DAC_TX_READY_OFFSET 29
-+#define DAC_TX_READY_SIZE 1
-+#define DAC_TX_BUFFER_EMPTY_OFFSET 30
-+#define DAC_TX_BUFFER_EMPTY_SIZE 1
-+#define DAC_CHANNEL_TX_END_OFFSET 31
-+#define DAC_CHANNEL_TX_END_SIZE 1
-+
-+/* Bit manipulation macros */
-+#define DAC_BIT(name) \
-+ (1 << DAC_##name##_OFFSET)
-+#define DAC_BF(name, value) \
-+ (((value) & ((1 << DAC_##name##_SIZE) - 1)) \
-+ << DAC_##name##_OFFSET)
-+#define DAC_BFEXT(name, value) \
-+ (((value) >> DAC_##name##_OFFSET) \
-+ & ((1 << DAC_##name##_SIZE) - 1))
-+#define DAC_BFINS(name, value, old) \
-+ (((old) & ~(((1 << DAC_##name##_SIZE) - 1) \
-+ << DAC_##name##_OFFSET)) \
-+ | DAC_BF(name,value))
-+
-+/* Register access macros */
-+#define dac_readl(port, reg) \
-+ __raw_readl((port)->regs + DAC_##reg)
-+#define dac_writel(port, reg, value) \
-+ __raw_writel((value), (port)->regs + DAC_##reg)
-+
-+#endif /* __SOUND_OSS_AT32_ABDAC_H__ */
-diff -Nrup linux-2.6.24/sound/oss/Kconfig linux-avr32/sound/oss/Kconfig
---- linux-2.6.24/sound/oss/Kconfig 2008-01-24 17:58:37.000000000 -0500
-+++ linux-avr32/sound/oss/Kconfig 2008-02-01 14:51:49.000000000 -0500
-@@ -654,3 +654,7 @@ config SOUND_SH_DAC_AUDIO_CHANNEL
- int "DAC channel"
- default "1"
- depends on SOUND_SH_DAC_AUDIO
-+
-+config SOUND_AT32_ABDAC
-+ tristate "Atmel AT32 Audio Bitstream DAC (ABDAC) support"
-+ depends on SOUND_PRIME && AVR32
-diff -Nrup linux-2.6.24/sound/oss/Makefile linux-avr32/sound/oss/Makefile
---- linux-2.6.24/sound/oss/Makefile 2008-01-24 17:58:37.000000000 -0500
-+++ linux-avr32/sound/oss/Makefile 2008-02-01 14:51:49.000000000 -0500
-@@ -10,6 +10,7 @@ obj-$(CONFIG_SOUND_CS4232) += cs4232.o a
-
- # Please leave it as is, cause the link order is significant !
-
-+obj-$(CONFIG_SOUND_AT32_ABDAC) += at32_abdac.o
- obj-$(CONFIG_SOUND_SH_DAC_AUDIO) += sh_dac_audio.o
- obj-$(CONFIG_SOUND_HAL2) += hal2.o
- obj-$(CONFIG_SOUND_AEDSP16) += aedsp16.o
projects / buildroot.git / commitdiff