both raw registers and memory by the architecture methods
gdbarch_register_read and gdbarch_register_write. */
int nr_cooked_registers;
+ long sizeof_cooked_registers;
+ long sizeof_cooked_register_valid_p;
/* Offset and size (in 8 bit bytes), of reach register in the
register cache. All registers (including those in the range
gdb_assert (gdbarch != NULL);
/* FIXME: cagney/2002-05-11: Shouldn't be including pseudo-registers
- in the register buffer. Unfortunatly some architectures do. */
+ in the register cache. Unfortunatly some architectures still
+ rely on this and the pseudo_register_write() method. */
descr->nr_raw_registers = descr->nr_cooked_registers;
- descr->sizeof_raw_register_valid_p = descr->nr_cooked_registers;
-
- /* FIXME: cagney/2002-05-11: Instead of using REGISTER_BYTE() this
- code should compute the offets et.al. at runtime. This currently
- isn't possible because some targets overlap register locations -
- see the mess in read_register_bytes() and write_register_bytes()
- registers. */
+ descr->sizeof_raw_register_valid_p = descr->sizeof_cooked_register_valid_p;
+
+ /* Compute the offset of each register. Legacy architectures define
+ REGISTER_BYTE() so use that. */
+ /* FIXME: cagney/2002-11-07: Instead of using REGISTER_BYTE() this
+ code should, as is done in init_regcache_descr(), compute the
+ offets at runtime. This currently isn't possible as some ISAs
+ define overlapping register regions - see the mess in
+ read_register_bytes() and write_register_bytes() registers. */
descr->sizeof_register = XCALLOC (descr->nr_cooked_registers, long);
descr->register_offset = XCALLOC (descr->nr_cooked_registers, long);
descr->max_register_size = 0;
for (i = 0; i < descr->nr_cooked_registers; i++)
{
+ /* FIXME: cagney/2001-12-04: This code shouldn't need to use
+ REGISTER_BYTE(). Unfortunatly, legacy code likes to lay the
+ buffer out so that certain registers just happen to overlap.
+ Ulgh! New targets use gdbarch's register read/write and
+ entirely avoid this uglyness. */
descr->register_offset[i] = REGISTER_BYTE (i);
descr->sizeof_register[i] = REGISTER_RAW_SIZE (i);
if (descr->max_register_size < REGISTER_RAW_SIZE (i))
descr->max_register_size = REGISTER_VIRTUAL_SIZE (i);
}
- /* Come up with the real size of the registers buffer. */
- descr->sizeof_raw_registers = REGISTER_BYTES; /* OK use. */
+ /* Compute the real size of the register buffer. Start out by
+ trusting REGISTER_BYTES, but then adjust it upwards should that
+ be found to not be sufficient. */
+ /* FIXME: cagney/2002-11-05: Instead of using REGISTER_BYTES, this
+ code should, as is done in init_regcache_descr(), compute the
+ total number of register bytes using the accumulated offsets. */
+ descr->sizeof_cooked_registers = REGISTER_BYTES; /* OK use. */
for (i = 0; i < descr->nr_cooked_registers; i++)
{
long regend;
legacy code is free to put registers in random places in the
buffer separated by holes. Once REGISTER_BYTE() is killed
this can be greatly simplified. */
- /* FIXME: cagney/2001-12-04: This code shouldn't need to use
- REGISTER_BYTE(). Unfortunatly, legacy code likes to lay the
- buffer out so that certain registers just happen to overlap.
- Ulgh! New targets use gdbarch's register read/write and
- entirely avoid this uglyness. */
regend = descr->register_offset[i] + descr->sizeof_register[i];
- if (descr->sizeof_raw_registers < regend)
- descr->sizeof_raw_registers = regend;
+ if (descr->sizeof_cooked_registers < regend)
+ descr->sizeof_cooked_registers = regend;
}
+ /* FIXME: cagney/2002-05-11: Shouldn't be including pseudo-registers
+ in the register cache. Unfortunatly some architectures still
+ rely on this and the pseudo_register_write() method. */
+ descr->sizeof_raw_registers = descr->sizeof_cooked_registers;
}
static void *
directly onto the raw register cache while the pseudo's are
either mapped onto raw-registers or memory. */
descr->nr_cooked_registers = NUM_REGS + NUM_PSEUDO_REGS;
+ descr->sizeof_cooked_register_valid_p = NUM_REGS + NUM_PSEUDO_REGS;
/* Fill in a table of register types. */
descr->register_type = XCALLOC (descr->nr_cooked_registers,
array. This pretects GDB from erant code that accesses elements
of the global register_valid_p[] array in the range [NUM_REGS
.. NUM_REGS + NUM_PSEUDO_REGS). */
- descr->sizeof_raw_register_valid_p = NUM_REGS + NUM_PSEUDO_REGS;
+ descr->sizeof_raw_register_valid_p = descr->sizeof_cooked_register_valid_p;
- /* Lay out the register cache. The pseud-registers are included in
- the layout even though their value isn't stored in the register
- cache. Some code, via read_register_bytes() access a register
- using an offset/length rather than a register number.
+ /* Lay out the register cache.
NOTE: cagney/2002-05-22: Only register_type() is used when
constructing the register cache. It is assumed that the
descr->max_register_size = descr->sizeof_register[i];
}
/* Set the real size of the register cache buffer. */
- /* FIXME: cagney/2002-05-22: Should only need to allocate space
- for the raw registers. Unfortunatly some code still accesses
- the register array directly using the global registers[].
- Until that code has been purged, play safe and over allocating
- the register buffer. Ulgh! */
- descr->sizeof_raw_registers = offset;
- /* = descr->register_offset[descr->nr_raw_registers]; */
+ descr->sizeof_cooked_registers = offset;
}
+ /* FIXME: cagney/2002-05-22: Should only need to allocate space for
+ the raw registers. Unfortunatly some code still accesses the
+ register array directly using the global registers[]. Until that
+ code has been purged, play safe and over allocating the register
+ buffer. Ulgh! */
+ descr->sizeof_raw_registers = descr->sizeof_cooked_registers;
+
#if 0
/* Sanity check. Confirm that the assumptions about gdbarch are
true. The REGCACHE_DESCR_HANDLE is set before doing the checks