Improve support of OpenGL for BeagleBone Black

Make ti-gfx working on BeagleBone Black by adding an ugly necessary
patch to the kernel wich fix:
pvrsrvkm: Unknown symbol v7_dma_map_area
pvrsrvkm: Unknown symbol v7_dma_flush_range

Add drivers to the default kernel config used in beaglebone_defconfig
to enable the framebuffer.

Signed-off-by: Hadrien Boutteville <hadrien.boutteville@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

diff --git a/board/beaglebone/linux-3.12.config b/board/beaglebone/linux-3.12.config
index d2d80e9e62445691e854cf1875705adb81d47de8..0be5722b91cd3ba2fcbb665821794fdd4da899bf 100644 (file)
--- a/board/beaglebone/linux-3.12.config
+++ b/board/beaglebone/linux-3.12.config
@@ -122,7 +122,6 @@ CONFIG_SMSC_PHY=y
 # CONFIG_INPUT_KEYBOARD is not set
 # CONFIG_INPUT_MOUSE is not set
 CONFIG_SERIO_LIBPS2=y
-CONFIG_VT_HW_CONSOLE_BINDING=y
 # CONFIG_LEGACY_PTYS is not set
 CONFIG_SERIAL_8250=y
 CONFIG_SERIAL_8250_CONSOLE=y
@@ -163,6 +162,16 @@ CONFIG_REGULATOR_TPS65023=y
 CONFIG_REGULATOR_TPS6507X=y
 CONFIG_REGULATOR_TPS65217=y
 CONFIG_REGULATOR_TIAVSCLASS0=y
+CONFIG_FB=y
+CONFIG_FIRMWARE_EDID=y
+CONFIG_FB_DA8XX=y
+CONFIG_FB_DA8XX_TDA998X=y
+CONFIG_OMAP2_DSS=y
+CONFIG_OMAP2_DSS_SDI=y
+CONFIG_OMAP2_DSS_DSI=y
+CONFIG_FB_OMAP2=y
+CONFIG_DISPLAY_CONNECTOR_HDMI=y
+CONFIG_FRAMEBUFFER_CONSOLE=y
 CONFIG_USB=y
 CONFIG_USB_ANNOUNCE_NEW_DEVICES=y
 CONFIG_USB_MON=y

diff --git a/board/beaglebone/patches/linux/linux-0001-arm-Export-cache-flush-management-symbols-when-MULTI.patch b/board/beaglebone/patches/linux/linux-0001-arm-Export-cache-flush-management-symbols-when-MULTI.patch
new file mode 100644 (file)
index 0000000..1ca1e70
--- /dev/null
+++ b/board/beaglebone/patches/linux/linux-0001-arm-Export-cache-flush-management-symbols-when-MULTI.patch
@@ -0,0 +1,34 @@
+From 29885f2f3d700341d322274db6ad085e601c0994 Mon Sep 17 00:00:00 2001
+From: Pantelis Antoniou <panto@antoniou-consulting.com>
+Date: Fri, 4 Jan 2013 00:32:33 +0200
+Subject: [PATCH 3/3] arm: Export cache flush management symbols when
+ !MULTI_CACHE
+
+When compiling a kernel without CONFIG_MULTI_CACHE enabled the
+dma access functions end up not being exported. Fix it.
+
+Signed-off-by: Pantelis Antoniou <panto@antoniou-consulting.com>
+---
+ arch/arm/kernel/setup.c |    9 +++++++++
+ 1 file changed, 9 insertions(+)
+
+diff --git a/arch/arm/kernel/setup.c b/arch/arm/kernel/setup.c
+index da1d1aa..dcb678c 100644
+--- a/arch/arm/kernel/setup.c
++++ b/arch/arm/kernel/setup.c
+@@ -923,3 +923,12 @@ const struct seq_operations cpuinfo_op = {
+       .stop   = c_stop,
+       .show   = c_show
+ };
++
++/* export the cache management functions */
++#ifndef MULTI_CACHE
++
++EXPORT_SYMBOL(__glue(_CACHE,_dma_map_area));
++EXPORT_SYMBOL(__glue(_CACHE,_dma_unmap_area));
++EXPORT_SYMBOL(__glue(_CACHE,_dma_flush_range));
++
++#endif
+-- 
+1.7.10.4
+

diff --git a/configs/beaglebone_defconfig b/configs/beaglebone_defconfig
index 3181c66094de641d376d066b1faea7399a9166a2..f825fa940c261cc7c38990d180f8dbdda995555b 100644 (file)
--- a/configs/beaglebone_defconfig
+++ b/configs/beaglebone_defconfig
@@ -33,6 +33,7 @@ BR2_LINUX_KERNEL=y
 BR2_LINUX_KERNEL_CUSTOM_GIT=y
 BR2_LINUX_KERNEL_CUSTOM_REPO_URL="git://git.ti.com/ti-linux-kernel/ti-linux-kernel.git"
 BR2_LINUX_KERNEL_CUSTOM_REPO_VERSION="7f280334068b7c875ade51f8f3921ab311f0c824"
+BR2_LINUX_KERNEL_PATCH="board/beaglebone/patches/linux/"
 BR2_LINUX_KERNEL_USE_CUSTOM_CONFIG=y
 BR2_LINUX_KERNEL_CUSTOM_CONFIG_FILE="board/beaglebone/linux-3.12.config"
 BR2_LINUX_KERNEL_ZIMAGE=y