different mapreduce modes

diff --git a/openpower/sv/svp64.mdwn b/openpower/sv/svp64.mdwn
index 1453dd9e9ac2c686f21d70ffbb72e961bceae651..b6502f9ce7893dc01877f22be8f886bda58f1792 100644 (file)
--- a/openpower/sv/svp64.mdwn
+++ b/openpower/sv/svp64.mdwn
@@ -203,7 +203,8 @@ The Mode table for operations except LD/ST is laid out as follows:
 | 0-1 |  2  |  3   4  |  description              |
 | --- | --- |---------|-------------------------- |
 | 00  |   0 |  dz  sz | normal mode                      |
-| 00  |   1 | dz RG   | reduce mode (mapreduce), SUBVL=1 |
+| 00  |   1 | 0  RG   | scalar reduce mode (mapreduce), SUBVL=1 |
+| 00  |   1 | 1  CRM  | parallel reduce mode (mapreduce), SUBVL=1 |
 | 00  |   1 | SVM RG  | subvector reduce mode, SUBVL>1   |
 | 01  | inv | CR-bit  | Rc=1: ffirst CR sel              |
 | 01  | inv | dz  RC1 |  Rc=0: ffirst z/nonz |
@@ -217,6 +218,7 @@ Fields:
 * **inv CR bit** just as in branches (BO) these bits allow testing of a CR bit and whether it is set (inv=0) or unset (inv=1)
 * **RG** inverts the Vector Loop order (VL-1 downto 0) rather
 than the normal 0..VL-1
+* **CRM** affects the CR on reduce mode when Rc=1
 * **SVM** sets "subvector" reduce mode
 * **N** sets signed/unsigned saturation.
 **RC1** as if Rc=1, stores CRs *but not the result*