static int do_not_ignore_hash = 0;
+typedef int packing_type;
+#define PACK_UNSPEC (0) /* packing order not specified */
+#define PACK_PARALLEL (1) /* "||" */
+#define PACK_LEFT_RIGHT (2) /* "->" */
+#define PACK_RIGHT_LEFT (3) /* "<-" */
+static packing_type etype = PACK_UNSPEC; /* used by d10v_cleanup */
+
/* True if instruction swapping warnings should be inhibited. */
static unsigned char flag_warn_suppress_instructionswap; /* --nowarnswap */
static void write_long PARAMS ((struct d10v_opcode *opcode, unsigned long insn, Fixups *fx));
static void write_1_short PARAMS ((struct d10v_opcode *opcode, unsigned long insn, Fixups *fx));
static int write_2_short PARAMS ((struct d10v_opcode *opcode1, unsigned long insn1,
- struct d10v_opcode *opcode2, unsigned long insn2, int exec_type, Fixups *fx));
+ struct d10v_opcode *opcode2, unsigned long insn2, packing_type exec_type, Fixups *fx));
static unsigned long do_assemble PARAMS ((char *str, struct d10v_opcode **opcode));
static unsigned long d10v_insert_operand PARAMS (( unsigned long insn, int op_type,
offsetT value, int left, fixS *fix));
static int parallel_ok PARAMS ((struct d10v_opcode *opcode1, unsigned long insn1,
struct d10v_opcode *opcode2, unsigned long insn2,
- int exec_type));
+ packing_type exec_type));
static symbolS * find_symbol_matching_register PARAMS ((expressionS *));
struct option md_longopts[] =
fx->fc = 0;
}
-/* write out a short form instruction if possible */
-/* return number of instructions not written out */
+/* Expects two short instructions.
+ If possible, writes out both as a single packed instruction.
+ Otherwise, writes out the first one, packed with a NOP.
+ Returns number of instructions not written out. */
+
static int
write_2_short (opcode1, insn1, opcode2, insn2, exec_type, fx)
struct d10v_opcode *opcode1, *opcode2;
unsigned long insn1, insn2;
- int exec_type;
+ packing_type exec_type;
Fixups *fx;
{
unsigned long insn;
char *f;
int i,j, where;
- if ( (exec_type != 1) && ((opcode1->exec_type & PARONLY)
+ if ( (exec_type != PACK_PARALLEL) && ((opcode1->exec_type & PARONLY)
|| (opcode2->exec_type & PARONLY)))
as_fatal (_("Instruction must be executed in parallel"));
if ( (opcode1->format & LONG_OPCODE) || (opcode2->format & LONG_OPCODE))
as_fatal (_("Long instructions may not be combined."));
- if(opcode1->exec_type & BRANCH_LINK && exec_type == 0)
- {
- /* Instructions paired with a subroutine call are executed before the
- subroutine, so don't do these pairings unless explicitly requested. */
- write_1_short (opcode1, insn1, fx->next);
- return (1);
- }
switch (exec_type)
{
- case 0: /* order not specified */
- if ( Optimizing && parallel_ok (opcode1, insn1, opcode2, insn2, exec_type))
+ case PACK_UNSPEC: /* order not specified */
+ if (opcode1->exec_type & ALONE)
+ {
+ /* Case of a short branch on a separate GAS line. Pack with NOP. */
+ write_1_short (opcode1, insn1, fx->next);
+ return 1;
+ }
+ if (Optimizing && parallel_ok (opcode1, insn1, opcode2, insn2, exec_type))
{
/* parallel */
if (opcode1->unit == IU)
else
{
insn = FM00 | (insn1 << 15) | insn2;
+ /* Advance over dummy fixup since packed insn1 in L */
fx = fx->next;
}
}
else if (opcode1->unit == IU)
- {
- /* reverse sequential */
- insn = FM10 | (insn2 << 15) | insn1;
- }
+ /* reverse sequential with IU opcode1 on right and done first */
+ insn = FM10 | (insn2 << 15) | insn1;
else
{
- /* sequential */
+ /* sequential with non-IU opcode1 on left and done first */
insn = FM01 | (insn1 << 15) | insn2;
- fx = fx->next;
+ /* Advance over dummy fixup since packed insn1 in L */
+ fx = fx->next;
}
break;
- case 1: /* parallel */
- if (opcode1->exec_type & SEQ || opcode2->exec_type & SEQ)
- as_fatal (_("One of these instructions may not be executed in parallel."));
+
+ case PACK_PARALLEL:
+ if (opcode1->exec_type & SEQ || opcode2->exec_type & SEQ)
+ as_fatal
+ (_("One of these instructions may not be executed in parallel."));
if (opcode1->unit == IU)
{
if (opcode2->unit == IU)
else
{
insn = FM00 | (insn1 << 15) | insn2;
+ /* Advance over dummy fixup since packed insn1 in L */
fx = fx->next;
}
break;
- case 2: /* sequential */
+
+
+ case PACK_LEFT_RIGHT:
if (opcode1->unit != IU)
insn = FM01 | (insn1 << 15) | insn2;
else if (opcode2->unit == MU || opcode2->unit == EITHER)
{
if (!flag_warn_suppress_instructionswap)
as_warn (_("Swapping instruction order"));
- insn = FM10 | (insn2 << 15) | insn1;
+ insn = FM10 | (insn2 << 15) | insn1;
}
else
as_fatal (_("IU instruction may not be in the left container"));
+ if (opcode1->exec_type & ALONE)
+ as_warn (_("Instruction in R container is squashed by flow control instruction in L container."));
+ /* Advance over dummy fixup */
fx = fx->next;
break;
- case 3: /* reverse sequential */
+
+
+ case PACK_RIGHT_LEFT:
if (opcode2->unit != MU)
insn = FM10 | (insn1 << 15) | insn2;
else if (opcode1->unit == IU || opcode1->unit == EITHER)
}
else
as_fatal (_("MU instruction may not be in the right container"));
+ if (opcode2->exec_type & ALONE)
+ as_warn (_("Instruction in R container is squashed by flow control instruction in L container."));
+ /* Advance over dummy fixup */
fx = fx->next;
break;
+
+
default:
as_fatal (_("unknown execution type passed to write_2_short()"));
}
+
f = frag_more(4);
number_to_chars_bigendian (f, insn, 4);
+ /* Process fixup chains.
+ Note that the packing code above advanced fx conditionally.
+ dlindsay@cygnus.com: There's something subtle going on here involving
+ _dummy_first_bfd_reloc_code_real. This is related to the
+ difference between BFD_RELOC_D10V_10_PCREL_R and _L, ie whether
+ a fixup is done in the L or R container. A bug in this code
+ can pass Plum Hall fine, yet still affect hand-written assembler. */
+
for (j=0; j<2; j++)
{
for (i=0; i < fx->fc; i++)
parallel_ok (op1, insn1, op2, insn2, exec_type)
struct d10v_opcode *op1, *op2;
unsigned long insn1, insn2;
- int exec_type;
+ packing_type exec_type;
{
int i, j, flags, mask, shift, regno;
unsigned long ins, mod[2], used[2];
|| (op1->unit == MU && op2->unit == MU))
return 0;
- /* If the first instruction is a branch and this is auto parallazation,
- don't combine with any second instruction. */
- if (exec_type == 0 && (op1->exec_type & BRANCH) != 0)
+ /* If this is auto parallization, and either instruction is a branch,
+ don't parallel. */
+ if (exec_type == PACK_UNSPEC
+ && (op1->exec_type & ALONE || op2->exec_type & ALONE))
return 0;
/* The idea here is to create two sets of bitmasks (mod and used)
static struct d10v_opcode *prev_opcode = 0;
static subsegT prev_subseg;
static segT prev_seg = 0;;
-static int etype = 0; /* saved extype. used for multiline instructions */
void
md_assemble (str)
char *str;
{
+ /* etype is saved extype. for multiline instructions */
+
+ packing_type extype = PACK_UNSPEC; /* parallel, etc */
+
struct d10v_opcode * opcode;
unsigned long insn;
- int extype = 0; /* execution type; parallel, etc */
char * str2;
- if (etype == 0)
+ if (etype == PACK_UNSPEC)
{
/* look for the special multiple instruction separators */
str2 = strstr (str, "||");
if (str2)
- extype = 1;
+ extype = PACK_PARALLEL;
else
{
str2 = strstr (str, "->");
if (str2)
- extype = 2;
+ extype = PACK_LEFT_RIGHT;
else
{
str2 = strstr (str, "<-");
if (str2)
- extype = 3;
+ extype = PACK_RIGHT_LEFT;
}
}
/* str2 points to the separator, if one */
*str2 = 0;
/* if two instructions are present and we already have one saved
- then first write it out */
+ then first write out the save one */
d10v_cleanup ();
/* assemble first instruction and save it */
insn = do_assemble (str, &opcode);
if (insn == -1)
{
- if (extype)
+ if (extype != PACK_UNSPEC)
{
etype = extype;
return;
as_fatal (_("can't find opcode "));
}
- if (etype)
+ if (etype != PACK_UNSPEC)
{
extype = etype;
- etype = 0;
+ etype = PACK_UNSPEC;
}
/* if this is a long instruction, write it and any previous short instruction */
if (opcode->format & LONG_OPCODE)
{
- if (extype)
+ if (extype != PACK_UNSPEC)
as_fatal (_("Unable to mix instructions as specified"));
d10v_cleanup ();
write_long (opcode, insn, fixups);
}
if (prev_opcode && prev_seg && ((prev_seg != now_seg) || (prev_subseg != now_subseg)))
- d10v_cleanup();
+ d10v_cleanup ();
if (prev_opcode && (write_2_short (prev_opcode, prev_insn, opcode, insn, extype, fixups) == 0))
{
}
else
{
- if (extype)
+ if (extype != PACK_UNSPEC)
as_fatal (_("Unable to mix instructions as specified"));
/* save off last instruction so it may be packed on next pass */
prev_opcode = opcode;
/* d10v_cleanup() is called after the assembler has finished parsing the input
file or after a label is defined. Because the D10V assembler sometimes saves short
instructions to see if it can package them with the next instruction, there may
- be a short instruction that still needs written. */
+ be a short instruction that still needs written.
+ NOTE: accesses a global, etype.
+ NOTE: invoked by various macros such as md_cleanup: see. */
int
d10v_cleanup ()
{
segT seg;
subsegT subseg;
- if (prev_opcode && etype == 0)
+ if (prev_opcode && etype == PACK_UNSPEC)
{
seg = now_seg;
subseg = now_subseg;
projects / binutils-gdb.git / commitdiff