* config/arm/nm-linux.h: Likewise.
* config/arm/tm-linux.h: Likewise.
* config/ia64/nm-linux.h: Likewise.
* config/ia64/tm-ia64.h: Likewise.
* config/s390/tm-linux.h: Likewise.
* config/s390/tm-s390.h: Likewise.
* s390-nat.c: Likewise.
* s390-tdep.c: Likewise.
* config/i386/linux.mt: Don't set GDBSERVER_DEPFILES.
* config/ia64/linux.mt: Likewise.
* config/m68k/linux.mh: Likewise.
* config/mips/linux.mt: Likewise.
* config/powerpc/linux.mh: Likewise.
* config/sh/linux.mt: Likewise.
+2003-06-20 Daniel Jacobowitz <drow@mvista.com>
+
+ * config/arm/linux.mt: Remove code protected by GDBSERVER define.
+ * config/arm/nm-linux.h: Likewise.
+ * config/arm/tm-linux.h: Likewise.
+ * config/ia64/nm-linux.h: Likewise.
+ * config/ia64/tm-ia64.h: Likewise.
+ * config/s390/tm-linux.h: Likewise.
+ * config/s390/tm-s390.h: Likewise.
+ * s390-nat.c: Likewise.
+ * s390-tdep.c: Likewise.
+
+ * config/i386/linux.mt: Don't set GDBSERVER_DEPFILES.
+ * config/ia64/linux.mt: Likewise.
+ * config/m68k/linux.mh: Likewise.
+ * config/mips/linux.mt: Likewise.
+ * config/powerpc/linux.mh: Likewise.
+ * config/sh/linux.mt: Likewise.
+
2003-06-19 Kris Warkentin <kewarken@qnx.com>
* solib.c (solib_open): Change tests for whether to search
# Target: ARM based machine running GNU/Linux
TM_FILE= tm-linux.h
TDEPFILES= arm-tdep.o arm-linux-tdep.o solib.o solib-svr4.o solib-legacy.o
-
-GDBSERVER_DEPFILES = linux-low.o linux-arm-low.o reg-arm.o
#define U_REGS_OFFSET 0
-#ifdef GDBSERVER
-#define REGISTER_U_ADDR(addr,blockend,regno) \
- (addr) = arm_register_u_addr ((blockend),(regno))
-#endif /* GDBSERVER */
-
/* Return sizeof user struct to callers in less machine dependent routines */
extern int kernel_u_size (void);
#define KERNEL_U_SIZE arm_linux_kernel_u_size()
#ifndef TM_ARMLINUX_H
#define TM_ARMLINUX_H
-#ifdef GDBSERVER
-#define ARM_GNULINUX_TARGET
-#endif
-
/* Include the common ARM target definitions. */
#include "arm/tm-arm.h"
TDEPFILES= i386-tdep.o i386-linux-tdep.o i387-tdep.o \
solib.o solib-svr4.o solib-legacy.o
TM_FILE= tm-linux.h
-
-GDBSERVER_DEPFILES = linux-low.o linux-i386-low.o reg-i386.o
TDEPFILES= ia64-tdep.o ia64-aix-tdep.o ia64-linux-tdep.o \
solib.o solib-svr4.o solib-legacy.o
TM_FILE= tm-linux.h
-
-GDBSERVER_DEPFILES = linux-low.o linux-ia64-low.o reg-ia64.o
#define CANNOT_STORE_REGISTER(regno) ia64_cannot_store_register(regno)
extern int ia64_cannot_store_register (int regno);
-#ifdef GDBSERVER
-#define REGISTER_U_ADDR(addr, blockend, regno) \
- (addr) = ia64_register_u_addr ((blockend),(regno));
-
-extern int ia64_register_u_addr(int, int);
-#endif /* GDBSERVER */
-
#define U_REGS_OFFSET 0
#define PTRACE_ARG3_TYPE long
#ifndef TM_IA64_H
#define TM_IA64_H
-#if !defined(GDBSERVER)
-
#define GDB_MULTI_ARCH 1
-#else /* defines needed for GDBSERVER */
-
-/* Say how long (ordinary) registers are. This is a piece of bogosity
- used in push_word and a few other places; REGISTER_RAW_SIZE is the
- real way to know how big a register is. */
-
-#define DEPRECATED_REGISTER_SIZE 8
-
-#undef NUM_REGS
-#define NUM_REGS 590
-
-/* Some pseudo register numbers */
-
-#define PC_REGNUM IA64_IP_REGNUM
-#define SP_REGNUM IA64_GR12_REGNUM
-#define DEPRECATED_FP_REGNUM IA64_VFP_REGNUM
-
-/* Total amount of space needed to store our copies of the machine's
- register state, the array `registers'. On the ia64, all registers
- fit in 64 bits except for the floating point registers which require
- 84 bits. But 84 isn't a nice number, so we'll just allocate 128
- bits for each of these. The expression below says that we
- need 8 bytes for each register, plus an additional 8 bytes for each
- of the 128 floating point registers. */
-
-#define DEPRECATED_REGISTER_BYTES (NUM_REGS*8+128*8)
-
-/* Index within `registers' of the first byte of the space for
- register N. */
-
-#define REGISTER_BYTE(N) (((N) * 8) \
- + ((N) <= IA64_FR0_REGNUM ? 0 : 8 * (((N) > IA64_FR127_REGNUM) ? 128 : (N) - IA64_FR0_REGNUM)))
-
-/* Number of bytes of storage in the actual machine representation
- for register N. */
-
-#define REGISTER_RAW_SIZE(N) \
- ((IA64_FR0_REGNUM <= (N) && (N) <= IA64_FR127_REGNUM) ? 16 : 8)
-
-/* Largest value REGISTER_RAW_SIZE can have. */
-
-#define DEPRECATED_MAX_REGISTER_RAW_SIZE 16
-
-
-#define GDBSERVER_RESUME_REGS { IA64_IP_REGNUM, IA64_PSR_REGNUM, SP_REGNUM, IA64_BSP_REGNUM, IA64_CFM_REGNUM }
-
-#endif /* GDBSERVER */
-
-
/* Register numbers of various important registers */
/* General registers; there are 128 of these 64 bit wide registers. The
# The dynamically loaded libthread_db needs access to symbols in the
# gdb executable.
LOADLIBES = -ldl -rdynamic
-
-GDBSERVER_DEPFILES = linux-low.o linux-m68k-low.o reg-m68k.o
solib.o solib-svr4.o
TM_FILE= tm-linux.h
-GDBSERVER_DEPFILES = linux-low.o linux-mips-low.o reg-mips.o
-
SIM_OBS = remote-sim.o
SIM = ../sim/mips/libsim.a
gcore.o linux-nat.o
LOADLIBES = -ldl -rdynamic
-
-GDBSERVER_DEPFILES = linux-low.o linux-ppc-low.o reg-ppc.o
#ifndef TM_LINUX_H
#define TM_LINUX_H
-#ifdef GDBSERVER
-#define S390_GNULINUX_TARGET
-#endif /* GDBSERVER */
+
#undef TARGET_ELF64
#define TARGET_ELF64 (gdbarch_tdep (current_gdbarch)->intreg_size==8)
#define S390X_REGISTER_BYTES ((8+8)+(8*S390_NUM_GPRS)+(4*S390_NUM_ACRS)+ \
(8*S390_NUM_CRS)+(S390_FPC_SIZE+S390_FPC_PAD_SIZE)+(S390_FPR_SIZE*S390_NUM_FPRS))
-#ifdef GDBSERVER
-
-int s390_register_byte (int reg_nr);
-#define REGISTER_BYTE(reg_nr) s390_register_byte(reg_nr)
-#define PC_REGNUM S390_PC_REGNUM
-#define NUM_REGS S390_NUM_REGS
-#define NUM_FREGS S390_NUM_FPRS
-#define DEPRECATED_FP_REGNUM S390_FP_REGNUM
-#define SP_REGNUM S390_SP_REGNUM
-/* Obviously ptrace for user program tracing cannot be allowed
- mess with control registers (except per registers for hardware watchpoints),
- when we add kernel debugging we may need to alter these macros. */
-int s390_cannot_fetch_register (int regno);
-#define CANNOT_FETCH_REGISTER(regno) s390_cannot_fetch_register(regno)
-#define CANNOT_STORE_REGISTER(regno) s390_cannot_fetch_register(regno)
-
-#if CONFIG_ARCH_S390X
-
-int s390x_register_raw_size (int reg_nr);
-#define REGISTER_RAW_SIZE(reg_nr) s390x_register_raw_size(reg_nr)
-#define GDB_TARGET_IS_ESAME (1)
-#define DEPRECATED_REGISTER_SIZE (8)
-#define DEPRECATED_REGISTER_BYTES S390X_REGISTER_BYTES
-
-#else /* CONFIG_ARCH_S390X */
-
-int s390_register_raw_size (int reg_nr);
-#define REGISTER_RAW_SIZE(reg_nr) s390_register_raw_size(reg_nr)
-#define GDB_TARGET_IS_ESAME (0)
-#define DEPRECATED_REGISTER_SIZE (4)
-#define DEPRECATED_REGISTER_BYTES S390_REGISTER_BYTES
-
-#endif /* CONFIG_ARCH_S390X */
-
-#else /* GDBSERVER */
-
#define GDB_TARGET_IS_ESAME (TARGET_ARCHITECTURE->mach == bfd_mach_s390_64)
-#endif /* GDBSERVER */
#endif /* ifndef TM_S390_H */
SIM_OBS = remote-sim.o
SIM = ../sim/sh/libsim.a
-
-GDBSERVER_DEPFILES = linux-low.o linux-sh-low.o reg-sh.o
retval = PT_CR_9 + ((regnum - (S390_FIRST_CR + 9)) * S390_CR_SIZE);
else
{
-#ifdef GDBSERVER
- error ("s390_register_u_addr invalid regnum %s %d regnum=%d",
- __FILE__, (int) __LINE__, regnum);
-#else
internal_error (__FILE__, __LINE__,
"s390_register_u_addr invalid regnum regnum=%d",
regnum);
-#endif
retval = 0;
}
return retval + blockend;
}
-#ifndef GDBSERVER
/* watch_areas are required if you put 2 or more watchpoints on the same
address or overlapping areas gdb will call us to delete the watchpoint
more than once when we try to delete them.
#error "libc files are inconsistent with linux/include/asm-s390/"
#error "3) you didn't do a completely clean build & delete config.cache."
#endif
-#endif /* GDBSERVER */
return S390_FP0_OFFSET + (((reg_nr) - S390_FP0_REGNUM) * S390_FPR_SIZE);
}
-#ifndef GDBSERVER
#define S390_MAX_INSTR_SIZE (6)
#define S390_SYSCALL_OPCODE (0x0a)
#define S390_SYSCALL_SIZE (2)
if (!deprecated_tm_print_insn) /* Someone may have already set it */
deprecated_tm_print_insn = gdb_print_insn_s390;
}
-
-#endif /* GDBSERVER */
projects / binutils-gdb.git / commitdiff