/* Target communications support for Macraigor Systems' On-Chip Debugging
- Copyright 1996, 1997, 1998, 1999, 2000, 2001, 2002 Free Software
- Foundation, Inc.
+ Copyright 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2004 Free
+ Software Foundation, Inc.
This file is part of GDB.
static int readchar (int timeout);
-static void reset_packet (void);
-
-static void output_packet (void);
-
-static int get_quoted_char (int timeout);
-
-static void put_quoted_char (int c);
-
static void ocd_interrupt (int signo);
static void ocd_interrupt_twice (int signo);
static int last_run_status;
-/* This was 5 seconds, which is a long time to sit and wait.
- Unless this is going though some terminal server or multiplexer or
- other form of hairy serial connection, I would think 2 seconds would
- be plenty. */
-
-#if 0
-/* FIXME: Change to allow option to set timeout value on a per target
- basis. */
-static int remote_timeout = 2;
-#endif
-
/* Descriptor for I/O to remote machine. Initialize it to NULL so that
ocd_open knows that we don't have a file open when the program
starts. */
printf_unfiltered ("[Wiggler version %x.%x, capability 0x%x]\n",
p[0], p[1], (p[2] << 16) | p[3]);
-#if 0
- /* Reset the target */
-
- ocd_do_command (OCD_RESET_RUN, &status, &pktlen);
-/* ocd_do_command (OCD_RESET, &status, &pktlen); */
-#endif
-
/* If processor is still running, stop it. */
if (!(status & OCD_FLAG_BDM))
ocd_stop ();
-#if 1
/* When using a target box, we want to asynchronously return status when
target stops. The OCD_SET_CTL_FLAGS command is ignored by Wigglers.dll
when using a parallel Wiggler */
if (error_code != 0)
ocd_error ("OCD_SET_CTL_FLAGS:", error_code);
-#endif
immediate_quit--;
}
}
-#if 0
-/* Read a character from the data stream, dequoting as necessary. SYN is
- treated special. Any SYNs appearing in the data stream are returned as the
- distinct value RAW_SYN (which has a value > 8 bits and therefore cannot be
- mistaken for real data). */
-
-static int
-get_quoted_char (int timeout)
-{
- int ch;
-
- ch = readchar (timeout);
-
- switch (ch)
- {
- case SERIAL_TIMEOUT:
- error ("Timeout in mid-packet, aborting");
- case SYN:
- return RAW_SYN;
- case DLE:
- ch = readchar (timeout);
- if (ch == SYN)
- return RAW_SYN;
- return ch & ~0100;
- default:
- return ch;
- }
-}
-
-static unsigned char pkt[256 * 2 + 10], *pktp; /* Worst case */
-
-static void
-reset_packet (void)
-{
- pktp = pkt;
-}
-
-static void
-output_packet (void)
-{
- if (serial_write (ocd_desc, pkt, pktp - pkt))
- perror_with_name ("output_packet: write failed");
-
- reset_packet ();
-}
-
-/* Output a quoted character. SYNs and DLEs are quoted. Everything else goes
- through untouched. */
-
-static void
-put_quoted_char (int c)
-{
- switch (c)
- {
- case SYN:
- case DLE:
- *pktp++ = DLE;
- c |= 0100;
- }
-
- *pktp++ = c;
-}
-
-/* Send a packet to the OCD device. The packet framed by a SYN character,
- a byte count and a checksum. The byte count only counts the number of
- bytes between the count and the checksum. A count of zero actually
- means 256. Any SYNs within the packet (including the checksum and
- count) must be quoted. The quote character must be quoted as well.
- Quoting is done by replacing the character with the two-character sequence
- DLE, {char} | 0100. Note that the quoting mechanism has no effect on the
- byte count. */
-
-static void
-stu_put_packet (unsigned char *buf, int len)
-{
- unsigned char checksum;
- unsigned char c;
-
- if (len == 0 || len > 256)
- internal_error (__FILE__, __LINE__, "failed internal consistency check"); /* Can't represent 0 length packet */
-
- reset_packet ();
-
- checksum = 0;
-
- put_quoted_char (RAW_SYN);
-
- c = len;
-
- do
- {
- checksum += c;
-
- put_quoted_char (c);
-
- c = *buf++;
- }
- while (len-- > 0);
-
- put_quoted_char (-checksum & 0xff);
-
- output_packet ();
-}
-
-#else
-
/* Send a packet to the OCD device. The packet framed by a SYN character,
a byte count and a checksum. The byte count only counts the number of
bytes between the count and the checksum. A count of zero actually
if (serial_write (ocd_desc, packet, packet_ptr - packet))
perror_with_name ("output_packet: write failed");
}
-#endif
-
-#if 0
-/* Get a packet from the OCD device. Timeout is only enforced for the
- first byte of the packet. Subsequent bytes are expected to arrive in
- time <= remote_timeout. Returns a pointer to a static buffer containing
- the payload of the packet. *LENP contains the length of the packet.
- */
-
-static unsigned char *
-stu_get_packet (unsigned char cmd, int *lenp, int timeout)
-{
- int ch;
- int len;
- static unsigned char buf[256 + 10], *p;
- unsigned char checksum;
-
-find_packet:
-
- ch = get_quoted_char (timeout);
-
- if (ch < 0)
- error ("get_packet (readchar): %d", ch);
-
- if (ch != RAW_SYN)
- goto find_packet;
-
-found_syn: /* Found the start of a packet */
-
- p = buf;
- checksum = 0;
-
- len = get_quoted_char (remote_timeout);
-
- if (len == RAW_SYN)
- goto found_syn;
-
- checksum += len;
-
- if (len == 0)
- len = 256;
-
- len++; /* Include checksum */
-
- while (len-- > 0)
- {
- ch = get_quoted_char (remote_timeout);
- if (ch == RAW_SYN)
- goto found_syn;
-
- *p++ = ch;
- checksum += ch;
- }
-
- if (checksum != 0)
- goto find_packet;
-
- if (cmd != buf[0])
- error ("Response phase error. Got 0x%x, expected 0x%x", buf[0], cmd);
-
- *lenp = p - buf - 1;
- return buf;
-}
-
-#else
/* Get a packet from the OCD device. Timeout is only enforced for the
first byte of the packet. Subsequent bytes are expected to arrive in
*lenp = packet_ptr - packet - 1; /* Subtract checksum byte */
return packet;
}
-#endif
/* Execute a simple (one-byte) command. Returns a pointer to the data
following the error code. */
not yet supported fully */
#define BDM_BREAKPOINT {0x0,0x0,0x0,0x0} /* For ppc 8xx */
-#if 0
-#define BDM_BREAKPOINT {0x4a,0xfa} /* BGND insn used for CPU32 */
-#endif
/* BDM (at least on CPU32) uses a different breakpoint */
/* discard_cleanups (old_chain); */
}
-
-static void
-bdm_read_register_command (char *args, int from_tty)
-{
- /* XXX repeat should go on to the next register */
-
- if (!ocd_desc)
- error ("Not connected to OCD device.");
-
- if (!args)
- error ("Must specify BDM register number.");
-
-}
\f
extern initialize_file_ftype _initialize_remote_ocd; /* -Wmissing-prototypes */
add_cmd ("reset", class_obscure, bdm_reset_command, "", &ocd_cmd_list);
add_cmd ("restart", class_obscure, bdm_restart_command, "", &ocd_cmd_list);
add_cmd ("update-flash", class_obscure, bdm_update_flash_command, "", &ocd_cmd_list);
- /* add_cmd ("read-register", class_obscure, bdm_read_register_command, "", &ocd_cmd_list); */
}
projects / binutils-gdb.git / commitdiff