+2013-10-10 Joel Brobecker <brobecker@adacore.com>
+
+ * cli/cli-cmds.c (show_baud_rate): Moved to serial.c as
+ serial_baud_show_cmd.
+ (_initialize_cli_cmds): Delete the code creating the
+ "set/show remotebaud" commands.
+ * serial.c (baud_rate): Move here from top.c.
+ (serial_baud_show_cmd): Move here from cli/cli-cmds.c.
+ (_initialize_serial): Create "set/show serial baud" commands.
+ Add "set/show remotebaud" command aliases.
+ * top.c (baud_rate): Moved to serial.c.
+ * NEWS: Document the new "set/show serial baud" commands,
+ replacing "set/show remotebaud".
+
2013-10-09 Pedro Alves <palves@redhat.com>
* breakpoint.c (insert_bp_location): Use memory_error_message to
* GDB can now use Windows x64 unwinding data.
+* The "set remotebaud" command has been replaced by "set serial baud".
+ Similarly, "show remotebaud" has been replaced by "show serial baud".
+ The "set remotebaud" and "show remotebaud" commands are still available
+ to provide backward compatibility with older versions of GDB.
+
*** Changes in GDB 7.6
* Target record has been renamed to record-full.
value);
}
-static void
-show_baud_rate (struct ui_file *file, int from_tty,
- struct cmd_list_element *c, const char *value)
-{
- fprintf_filtered (file, _("Baud rate for remote serial I/O is %s.\n"),
- value);
-}
-
static void
show_remote_debug (struct ui_file *file, int from_tty,
struct cmd_list_element *c, const char *value)
add_cmd ("configuration", no_set_class, show_configuration,
_("Show how GDB was configured at build time."), &showlist);
- /* If target is open when baud changes, it doesn't take effect until
- the next open (I think, not sure). */
- add_setshow_zinteger_cmd ("remotebaud", no_class, &baud_rate, _("\
-Set baud rate for remote serial I/O."), _("\
-Show baud rate for remote serial I/O."), _("\
-This value is used to set the speed of the serial port when debugging\n\
-using remote targets."),
- NULL,
- show_baud_rate,
- &setlist, &showlist);
-
add_setshow_zinteger_cmd ("remote", no_class, &remote_debug, _("\
Set debugging of remote protocol."), _("\
Show debugging of remote protocol."), _("\
+2013-10-10 Joel Brobecker <brobecker@adacore.com>
+
+ * gdb.texinfo: Replace "set remotebaud" and "show remotebaud"
+ by "set serial baud" and "show serial baud" (resp) throughout.
+
2013-10-07 Pedro Alves <palves@redhat.com>
PR breakpoints/11568
@end smallexample
If you're using a serial line, you may want to give @value{GDBN} the
-@w{@samp{--baud}} option, or use the @code{set remotebaud} command
-(@pxref{Remote Configuration, set remotebaud}) before the
+@w{@samp{--baud}} option, or use the @code{set serial baud} command
+(@pxref{Remote Configuration, set serial baud}) before the
@code{target} command.
@item target remote @code{@var{host}:@var{port}}
@item show remoteaddresssize
Show the current value of remote address size in bits.
-@item set remotebaud @var{n}
+@item set serial baud @var{n}
@cindex baud rate for remote targets
Set the baud rate for the remote serial I/O to @var{n} baud. The
value is used to set the speed of the serial port used for debugging
remote targets.
-@item show remotebaud
+@item show serial baud
Show the current speed of the remote connection.
@item set remotebreak
cmd_show_list (serial_show_cmdlist, from_tty, "");
}
+/* Baud rate specified for talking to serial target systems. Default
+ is left as -1, so targets can choose their own defaults. */
+/* FIXME: This means that "show serial baud" and gr_files_info can
+ print -1 or (unsigned int)-1. This is a Bad User Interface. */
+
+int baud_rate = -1;
+
+static void
+serial_baud_show_cmd (struct ui_file *file, int from_tty,
+ struct cmd_list_element *c, const char *value)
+{
+ fprintf_filtered (file, _("Baud rate for remote serial I/O is %s.\n"),
+ value);
+}
void
_initialize_serial (void)
0/*allow-unknown*/,
&showlist);
+ /* If target is open when baud changes, it doesn't take effect until
+ the next open (I think, not sure). */
+ add_setshow_zinteger_cmd ("baud", no_class, &baud_rate, _("\
+Set baud rate for remote serial I/O."), _("\
+Show baud rate for remote serial I/O."), _("\
+This value is used to set the speed of the serial port when debugging\n\
+using remote targets."),
+ NULL,
+ serial_baud_show_cmd,
+ &serial_set_cmdlist, &serial_show_cmdlist);
+
+ /* The commands "set/show serial baud" used to have a different name.
+ Add aliases to those names to facilitate the transition, and mark
+ them as deprecated, in order to make users aware of the fact that
+ the command names have been changed. */
+ {
+ const char *cmd_name;
+ struct cmd_list_element *cmd;
+
+ /* FIXME: There is a limitation in the deprecation mechanism,
+ and the warning ends up not being displayed for prefixed
+ aliases. So use a real command instead of an alias. */
+ add_setshow_zinteger_cmd ("remotebaud", class_alias, &baud_rate, _("\
+Set baud rate for remote serial I/O."), _("\
+Show baud rate for remote serial I/O."), _("\
+This value is used to set the speed of the serial port when debugging\n\
+using remote targets."),
+ NULL,
+ serial_baud_show_cmd,
+ &setlist, &showlist);
+ cmd_name = "remotebaud";
+ cmd = lookup_cmd (&cmd_name, setlist, "", -1, 1);
+ deprecate_cmd (cmd, "set serial baud");
+ cmd_name
+ = "remotebaud"; /* needed because lookup_cmd updates the pointer */
+ cmd = lookup_cmd (&cmd_name, showlist, "", -1, 1);
+ deprecate_cmd (cmd, "show serial baud");
+ }
+
add_setshow_filename_cmd ("remotelogfile", no_class, &serial_logfile, _("\
Set filename for remote session recording."), _("\
Show filename for remote session recording."), _("\
is issuing commands too. */
int server_command;
-/* Baud rate specified for talking to serial target systems. Default
- is left as -1, so targets can choose their own defaults. */
-/* FIXME: This means that "show remotebaud" and gr_files_info can
- print -1 or (unsigned int)-1. This is a Bad User Interface. */
-
-int baud_rate = -1;
-
/* Timeout limit for response from target. */
/* The default value has been changed many times over the years. It
projects / binutils-gdb.git / commitdiff