BUILD_PREFIX = @BUILD_PREFIX@
BUILD_PREFIX_1 = @BUILD_PREFIX_1@
+# Flags to pass to stage2 and later makes. They are defined
+# here so that they can be overridden by Makefile fragments.
+BOOT_CFLAGS= -g -O2
+
CONFIGURED_BISON = @CONFIGURED_BISON@
BISON = `if [ -f $$r/$(BUILD_SUBDIR)/bison/tests/bison ] ; then \
echo $$r/$(BUILD_SUBDIR)/bison/tests/bison ; \
# Miscellaneous targets and flag lists
# ------------------------------------
-@if gcc-bootstrap
-# Let's leave this as the first rule in the file until toplevel
-# bootstrap is fleshed out completely.
-sorry:
- @echo Toplevel bootstrap temporarily out of commission.
- @echo Please reconfigure without --enable-bootstrap
-@endif gcc-bootstrap
-
# The first rule in the file had better be this one. Don't put any above it.
# This lives here to allow makefile fragments to contain dependencies.
@default_target@:
# (both in a combined tree, or separately). This however requires some
# change to the gcc driver, again in order to avoid comparison failures.
-# Bugs: This is almost certainly not parallel-make safe.
+# Bugs: This is crippled when doing parallel make, the `make all-host'
+# and `make all-target' phases can be parallelized.
+
# 'touch' doesn't work right on some platforms.
STAMP = echo timestamp >
objext = .o
# Flags to pass to stage2 and later makes.
-BOOT_CFLAGS= -g -O2
POSTSTAGE1_FLAGS_TO_PASS = \
CC="$${CC}" CC_FOR_BUILD="$${CC_FOR_BUILD}" \
STAGE_PREFIX=$$r/stage-gcc/ \
@if test -f stage1-lean ; then \
echo Skipping rebuild of stage1 ; \
else \
- $(MAKE) $(RECURSE_FLAGS_TO_PASS) all-stage1; \
+ $(MAKE) $(RECURSE_FLAGS_TO_PASS) NOTPARALLEL= all-stage1; \
fi
-.PHONY: all-stage1
+.PHONY: all-stage1 clean-stage1
all-stage1: \
maybe-all-stage1-bfd \
maybe-all-stage1-opcodes \
maybe-all-stage1-libiberty \
maybe-all-stage1-zlib
+do-clean: clean-stage1
+clean-stage1: \
+ maybe-clean-stage1-bfd \
+ maybe-clean-stage1-opcodes \
+ maybe-clean-stage1-binutils \
+ maybe-clean-stage1-gas \
+ maybe-clean-stage1-gcc \
+ maybe-clean-stage1-intl \
+ maybe-clean-stage1-ld \
+ maybe-clean-stage1-libcpp \
+ maybe-clean-stage1-libbanshee \
+ maybe-clean-stage1-libiberty \
+ maybe-clean-stage1-zlib
+
.PHONY: configure-stage1-bfd maybe-configure-stage1-bfd
.PHONY: all-stage1-bfd maybe-all-stage1-bfd
+.PHONY: clean-stage1-bfd maybe-clean-stage1-bfd
maybe-configure-stage1-bfd:
maybe-all-stage1-bfd:
+maybe-clean-stage1-bfd:
@if bfd-bootstrap
maybe-configure-stage1-bfd: configure-stage1-bfd
cd bfd && \
$(MAKE) $(FLAGS_TO_PASS) \
CFLAGS="$(STAGE1_CFLAGS)"
+
+maybe-clean-stage1-bfd: clean-stage1-bfd
+clean-stage1-bfd:
+ @[ -f bfd/Makefile ] || [ -f stage1-bfd/Makefile ] \
+ || exit 0 ; \
+ [ -f bfd/Makefile ] || $(MAKE) stage1-start ; \
+ cd bfd && \
+ $(MAKE) $(FLAGS_TO_PASS) \
+ CFLAGS="$(STAGE1_CFLAGS)" clean
@endif bfd-bootstrap
+
.PHONY: configure-stage1-opcodes maybe-configure-stage1-opcodes
.PHONY: all-stage1-opcodes maybe-all-stage1-opcodes
+.PHONY: clean-stage1-opcodes maybe-clean-stage1-opcodes
maybe-configure-stage1-opcodes:
maybe-all-stage1-opcodes:
+maybe-clean-stage1-opcodes:
@if opcodes-bootstrap
maybe-configure-stage1-opcodes: configure-stage1-opcodes
cd opcodes && \
$(MAKE) $(FLAGS_TO_PASS) \
CFLAGS="$(STAGE1_CFLAGS)"
+
+maybe-clean-stage1-opcodes: clean-stage1-opcodes
+clean-stage1-opcodes:
+ @[ -f opcodes/Makefile ] || [ -f stage1-opcodes/Makefile ] \
+ || exit 0 ; \
+ [ -f opcodes/Makefile ] || $(MAKE) stage1-start ; \
+ cd opcodes && \
+ $(MAKE) $(FLAGS_TO_PASS) \
+ CFLAGS="$(STAGE1_CFLAGS)" clean
@endif opcodes-bootstrap
+
.PHONY: configure-stage1-binutils maybe-configure-stage1-binutils
.PHONY: all-stage1-binutils maybe-all-stage1-binutils
+.PHONY: clean-stage1-binutils maybe-clean-stage1-binutils
maybe-configure-stage1-binutils:
maybe-all-stage1-binutils:
+maybe-clean-stage1-binutils:
@if binutils-bootstrap
maybe-configure-stage1-binutils: configure-stage1-binutils
cd binutils && \
$(MAKE) $(FLAGS_TO_PASS) \
CFLAGS="$(STAGE1_CFLAGS)"
+
+maybe-clean-stage1-binutils: clean-stage1-binutils
+clean-stage1-binutils:
+ @[ -f binutils/Makefile ] || [ -f stage1-binutils/Makefile ] \
+ || exit 0 ; \
+ [ -f binutils/Makefile ] || $(MAKE) stage1-start ; \
+ cd binutils && \
+ $(MAKE) $(FLAGS_TO_PASS) \
+ CFLAGS="$(STAGE1_CFLAGS)" clean
@endif binutils-bootstrap
+
.PHONY: configure-stage1-gas maybe-configure-stage1-gas
.PHONY: all-stage1-gas maybe-all-stage1-gas
+.PHONY: clean-stage1-gas maybe-clean-stage1-gas
maybe-configure-stage1-gas:
maybe-all-stage1-gas:
+maybe-clean-stage1-gas:
@if gas-bootstrap
maybe-configure-stage1-gas: configure-stage1-gas
cd gas && \
$(MAKE) $(FLAGS_TO_PASS) \
CFLAGS="$(STAGE1_CFLAGS)"
+
+maybe-clean-stage1-gas: clean-stage1-gas
+clean-stage1-gas:
+ @[ -f gas/Makefile ] || [ -f stage1-gas/Makefile ] \
+ || exit 0 ; \
+ [ -f gas/Makefile ] || $(MAKE) stage1-start ; \
+ cd gas && \
+ $(MAKE) $(FLAGS_TO_PASS) \
+ CFLAGS="$(STAGE1_CFLAGS)" clean
@endif gas-bootstrap
+
.PHONY: configure-stage1-gcc maybe-configure-stage1-gcc
.PHONY: all-stage1-gcc maybe-all-stage1-gcc
+.PHONY: clean-stage1-gcc maybe-clean-stage1-gcc
maybe-configure-stage1-gcc:
maybe-all-stage1-gcc:
+maybe-clean-stage1-gcc:
@if gcc-bootstrap
maybe-configure-stage1-gcc: configure-stage1-gcc
cd gcc && \
$(MAKE) $(FLAGS_TO_PASS) \
CFLAGS="$(STAGE1_CFLAGS)" $(EXTRA_GCC_FLAGS)
+
+maybe-clean-stage1-gcc: clean-stage1-gcc
+clean-stage1-gcc:
+ @[ -f gcc/Makefile ] || [ -f stage1-gcc/Makefile ] \
+ || exit 0 ; \
+ [ -f gcc/Makefile ] || $(MAKE) stage1-start ; \
+ cd gcc && \
+ $(MAKE) $(FLAGS_TO_PASS) \
+ CFLAGS="$(STAGE1_CFLAGS)" $(EXTRA_GCC_FLAGS) clean
@endif gcc-bootstrap
+
.PHONY: configure-stage1-intl maybe-configure-stage1-intl
.PHONY: all-stage1-intl maybe-all-stage1-intl
+.PHONY: clean-stage1-intl maybe-clean-stage1-intl
maybe-configure-stage1-intl:
maybe-all-stage1-intl:
+maybe-clean-stage1-intl:
@if intl-bootstrap
maybe-configure-stage1-intl: configure-stage1-intl
cd intl && \
$(MAKE) $(FLAGS_TO_PASS) \
CFLAGS="$(STAGE1_CFLAGS)"
+
+maybe-clean-stage1-intl: clean-stage1-intl
+clean-stage1-intl:
+ @[ -f intl/Makefile ] || [ -f stage1-intl/Makefile ] \
+ || exit 0 ; \
+ [ -f intl/Makefile ] || $(MAKE) stage1-start ; \
+ cd intl && \
+ $(MAKE) $(FLAGS_TO_PASS) \
+ CFLAGS="$(STAGE1_CFLAGS)" clean
@endif intl-bootstrap
+
.PHONY: configure-stage1-ld maybe-configure-stage1-ld
.PHONY: all-stage1-ld maybe-all-stage1-ld
+.PHONY: clean-stage1-ld maybe-clean-stage1-ld
maybe-configure-stage1-ld:
maybe-all-stage1-ld:
+maybe-clean-stage1-ld:
@if ld-bootstrap
maybe-configure-stage1-ld: configure-stage1-ld
cd ld && \
$(MAKE) $(FLAGS_TO_PASS) \
CFLAGS="$(STAGE1_CFLAGS)"
+
+maybe-clean-stage1-ld: clean-stage1-ld
+clean-stage1-ld:
+ @[ -f ld/Makefile ] || [ -f stage1-ld/Makefile ] \
+ || exit 0 ; \
+ [ -f ld/Makefile ] || $(MAKE) stage1-start ; \
+ cd ld && \
+ $(MAKE) $(FLAGS_TO_PASS) \
+ CFLAGS="$(STAGE1_CFLAGS)" clean
@endif ld-bootstrap
+
.PHONY: configure-stage1-libcpp maybe-configure-stage1-libcpp
.PHONY: all-stage1-libcpp maybe-all-stage1-libcpp
+.PHONY: clean-stage1-libcpp maybe-clean-stage1-libcpp
maybe-configure-stage1-libcpp:
maybe-all-stage1-libcpp:
+maybe-clean-stage1-libcpp:
@if libcpp-bootstrap
maybe-configure-stage1-libcpp: configure-stage1-libcpp
cd libcpp && \
$(MAKE) $(FLAGS_TO_PASS) \
CFLAGS="$(STAGE1_CFLAGS)"
+
+maybe-clean-stage1-libcpp: clean-stage1-libcpp
+clean-stage1-libcpp:
+ @[ -f libcpp/Makefile ] || [ -f stage1-libcpp/Makefile ] \
+ || exit 0 ; \
+ [ -f libcpp/Makefile ] || $(MAKE) stage1-start ; \
+ cd libcpp && \
+ $(MAKE) $(FLAGS_TO_PASS) \
+ CFLAGS="$(STAGE1_CFLAGS)" clean
@endif libcpp-bootstrap
+
.PHONY: configure-stage1-libbanshee maybe-configure-stage1-libbanshee
.PHONY: all-stage1-libbanshee maybe-all-stage1-libbanshee
+.PHONY: clean-stage1-libbanshee maybe-clean-stage1-libbanshee
maybe-configure-stage1-libbanshee:
maybe-all-stage1-libbanshee:
+maybe-clean-stage1-libbanshee:
@if libbanshee-bootstrap
maybe-configure-stage1-libbanshee: configure-stage1-libbanshee
cd libbanshee && \
$(MAKE) $(FLAGS_TO_PASS) \
CFLAGS="$(STAGE1_CFLAGS)"
+
+maybe-clean-stage1-libbanshee: clean-stage1-libbanshee
+clean-stage1-libbanshee:
+ @[ -f libbanshee/Makefile ] || [ -f stage1-libbanshee/Makefile ] \
+ || exit 0 ; \
+ [ -f libbanshee/Makefile ] || $(MAKE) stage1-start ; \
+ cd libbanshee && \
+ $(MAKE) $(FLAGS_TO_PASS) \
+ CFLAGS="$(STAGE1_CFLAGS)" clean
@endif libbanshee-bootstrap
+
.PHONY: configure-stage1-libiberty maybe-configure-stage1-libiberty
.PHONY: all-stage1-libiberty maybe-all-stage1-libiberty
+.PHONY: clean-stage1-libiberty maybe-clean-stage1-libiberty
maybe-configure-stage1-libiberty:
maybe-all-stage1-libiberty:
+maybe-clean-stage1-libiberty:
@if libiberty-bootstrap
maybe-configure-stage1-libiberty: configure-stage1-libiberty
cd libiberty && \
$(MAKE) $(FLAGS_TO_PASS) \
CFLAGS="$(STAGE1_CFLAGS)"
+
+maybe-clean-stage1-libiberty: clean-stage1-libiberty
+clean-stage1-libiberty:
+ @[ -f libiberty/Makefile ] || [ -f stage1-libiberty/Makefile ] \
+ || exit 0 ; \
+ [ -f libiberty/Makefile ] || $(MAKE) stage1-start ; \
+ cd libiberty && \
+ $(MAKE) $(FLAGS_TO_PASS) \
+ CFLAGS="$(STAGE1_CFLAGS)" clean
@endif libiberty-bootstrap
+
.PHONY: configure-stage1-zlib maybe-configure-stage1-zlib
.PHONY: all-stage1-zlib maybe-all-stage1-zlib
+.PHONY: clean-stage1-zlib maybe-clean-stage1-zlib
maybe-configure-stage1-zlib:
maybe-all-stage1-zlib:
+maybe-clean-stage1-zlib:
@if zlib-bootstrap
maybe-configure-stage1-zlib: configure-stage1-zlib
cd zlib && \
$(MAKE) $(FLAGS_TO_PASS) \
CFLAGS="$(STAGE1_CFLAGS)"
+
+maybe-clean-stage1-zlib: clean-stage1-zlib
+clean-stage1-zlib:
+ @[ -f zlib/Makefile ] || [ -f stage1-zlib/Makefile ] \
+ || exit 0 ; \
+ [ -f zlib/Makefile ] || $(MAKE) stage1-start ; \
+ cd zlib && \
+ $(MAKE) $(FLAGS_TO_PASS) \
+ CFLAGS="$(STAGE1_CFLAGS)" clean
@endif zlib-bootstrap
+
# FIXME: Will not need to be conditional when toplevel bootstrap is the
# only possibility, but now it conflicts with no-bootstrap rules
@if gcc-bootstrap
-.PHONY: distclean-stage1
-
-# Rules to wipe a stage and all the following ones, used for cleanstrap
+# Rules to wipe a stage and all the following ones, also used for cleanstrap
+.PHONY: distclean-stage1
distclean-stage1::
[ -f stage_current ] && $(MAKE) `cat stage_current`-end || :
rm -rf stage1-*
@if test -f stage2-lean || test -f stage1-lean ; then \
echo Skipping rebuild of stage2 ; \
else \
- $(MAKE) $(RECURSE_FLAGS_TO_PASS) all-stage2; \
+ $(MAKE) $(RECURSE_FLAGS_TO_PASS) NOTPARALLEL= all-stage2; \
fi
-.PHONY: all-stage2
+.PHONY: all-stage2 clean-stage2
all-stage2: \
maybe-all-stage2-bfd \
maybe-all-stage2-opcodes \
maybe-all-stage2-libiberty \
maybe-all-stage2-zlib
+do-clean: clean-stage2
+clean-stage2: \
+ maybe-clean-stage2-bfd \
+ maybe-clean-stage2-opcodes \
+ maybe-clean-stage2-binutils \
+ maybe-clean-stage2-gas \
+ maybe-clean-stage2-gcc \
+ maybe-clean-stage2-intl \
+ maybe-clean-stage2-ld \
+ maybe-clean-stage2-libcpp \
+ maybe-clean-stage2-libbanshee \
+ maybe-clean-stage2-libiberty \
+ maybe-clean-stage2-zlib
+
.PHONY: configure-stage2-bfd maybe-configure-stage2-bfd
.PHONY: all-stage2-bfd maybe-all-stage2-bfd
+.PHONY: clean-stage2-bfd maybe-clean-stage2-bfd
maybe-configure-stage2-bfd:
maybe-all-stage2-bfd:
+maybe-clean-stage2-bfd:
@if bfd-bootstrap
maybe-configure-stage2-bfd: configure-stage2-bfd
$(MAKE) $(FLAGS_TO_PASS) \
$(POSTSTAGE1_FLAGS_TO_PASS) \
+
+maybe-clean-stage2-bfd: clean-stage2-bfd
+clean-stage2-bfd:
+ @[ -f bfd/Makefile ] || [ -f stage2-bfd/Makefile ] \
+ || exit 0 ; \
+ [ -f bfd/Makefile ] || $(MAKE) stage2-start ; \
+ cd bfd && \
+ $(MAKE) $(FLAGS_TO_PASS) \
+ $(POSTSTAGE1_FLAGS_TO_PASS) \
+ clean
@endif bfd-bootstrap
+
.PHONY: configure-stage2-opcodes maybe-configure-stage2-opcodes
.PHONY: all-stage2-opcodes maybe-all-stage2-opcodes
+.PHONY: clean-stage2-opcodes maybe-clean-stage2-opcodes
maybe-configure-stage2-opcodes:
maybe-all-stage2-opcodes:
+maybe-clean-stage2-opcodes:
@if opcodes-bootstrap
maybe-configure-stage2-opcodes: configure-stage2-opcodes
$(MAKE) $(FLAGS_TO_PASS) \
$(POSTSTAGE1_FLAGS_TO_PASS) \
+
+maybe-clean-stage2-opcodes: clean-stage2-opcodes
+clean-stage2-opcodes:
+ @[ -f opcodes/Makefile ] || [ -f stage2-opcodes/Makefile ] \
+ || exit 0 ; \
+ [ -f opcodes/Makefile ] || $(MAKE) stage2-start ; \
+ cd opcodes && \
+ $(MAKE) $(FLAGS_TO_PASS) \
+ $(POSTSTAGE1_FLAGS_TO_PASS) \
+ clean
@endif opcodes-bootstrap
+
.PHONY: configure-stage2-binutils maybe-configure-stage2-binutils
.PHONY: all-stage2-binutils maybe-all-stage2-binutils
+.PHONY: clean-stage2-binutils maybe-clean-stage2-binutils
maybe-configure-stage2-binutils:
maybe-all-stage2-binutils:
+maybe-clean-stage2-binutils:
@if binutils-bootstrap
maybe-configure-stage2-binutils: configure-stage2-binutils
$(MAKE) $(FLAGS_TO_PASS) \
$(POSTSTAGE1_FLAGS_TO_PASS) \
+
+maybe-clean-stage2-binutils: clean-stage2-binutils
+clean-stage2-binutils:
+ @[ -f binutils/Makefile ] || [ -f stage2-binutils/Makefile ] \
+ || exit 0 ; \
+ [ -f binutils/Makefile ] || $(MAKE) stage2-start ; \
+ cd binutils && \
+ $(MAKE) $(FLAGS_TO_PASS) \
+ $(POSTSTAGE1_FLAGS_TO_PASS) \
+ clean
@endif binutils-bootstrap
+
.PHONY: configure-stage2-gas maybe-configure-stage2-gas
.PHONY: all-stage2-gas maybe-all-stage2-gas
+.PHONY: clean-stage2-gas maybe-clean-stage2-gas
maybe-configure-stage2-gas:
maybe-all-stage2-gas:
+maybe-clean-stage2-gas:
@if gas-bootstrap
maybe-configure-stage2-gas: configure-stage2-gas
$(MAKE) $(FLAGS_TO_PASS) \
$(POSTSTAGE1_FLAGS_TO_PASS) \
+
+maybe-clean-stage2-gas: clean-stage2-gas
+clean-stage2-gas:
+ @[ -f gas/Makefile ] || [ -f stage2-gas/Makefile ] \
+ || exit 0 ; \
+ [ -f gas/Makefile ] || $(MAKE) stage2-start ; \
+ cd gas && \
+ $(MAKE) $(FLAGS_TO_PASS) \
+ $(POSTSTAGE1_FLAGS_TO_PASS) \
+ clean
@endif gas-bootstrap
+
.PHONY: configure-stage2-gcc maybe-configure-stage2-gcc
.PHONY: all-stage2-gcc maybe-all-stage2-gcc
+.PHONY: clean-stage2-gcc maybe-clean-stage2-gcc
maybe-configure-stage2-gcc:
maybe-all-stage2-gcc:
+maybe-clean-stage2-gcc:
@if gcc-bootstrap
maybe-configure-stage2-gcc: configure-stage2-gcc
$(MAKE) $(FLAGS_TO_PASS) \
$(POSTSTAGE1_FLAGS_TO_PASS) \
$(EXTRA_GCC_FLAGS)
+
+maybe-clean-stage2-gcc: clean-stage2-gcc
+clean-stage2-gcc:
+ @[ -f gcc/Makefile ] || [ -f stage2-gcc/Makefile ] \
+ || exit 0 ; \
+ [ -f gcc/Makefile ] || $(MAKE) stage2-start ; \
+ cd gcc && \
+ $(MAKE) $(FLAGS_TO_PASS) \
+ $(POSTSTAGE1_FLAGS_TO_PASS) \
+ $(EXTRA_GCC_FLAGS) clean
@endif gcc-bootstrap
+
.PHONY: configure-stage2-intl maybe-configure-stage2-intl
.PHONY: all-stage2-intl maybe-all-stage2-intl
+.PHONY: clean-stage2-intl maybe-clean-stage2-intl
maybe-configure-stage2-intl:
maybe-all-stage2-intl:
+maybe-clean-stage2-intl:
@if intl-bootstrap
maybe-configure-stage2-intl: configure-stage2-intl
$(MAKE) $(FLAGS_TO_PASS) \
$(POSTSTAGE1_FLAGS_TO_PASS) \
+
+maybe-clean-stage2-intl: clean-stage2-intl
+clean-stage2-intl:
+ @[ -f intl/Makefile ] || [ -f stage2-intl/Makefile ] \
+ || exit 0 ; \
+ [ -f intl/Makefile ] || $(MAKE) stage2-start ; \
+ cd intl && \
+ $(MAKE) $(FLAGS_TO_PASS) \
+ $(POSTSTAGE1_FLAGS_TO_PASS) \
+ clean
@endif intl-bootstrap
+
.PHONY: configure-stage2-ld maybe-configure-stage2-ld
.PHONY: all-stage2-ld maybe-all-stage2-ld
+.PHONY: clean-stage2-ld maybe-clean-stage2-ld
maybe-configure-stage2-ld:
maybe-all-stage2-ld:
+maybe-clean-stage2-ld:
@if ld-bootstrap
maybe-configure-stage2-ld: configure-stage2-ld
$(MAKE) $(FLAGS_TO_PASS) \
$(POSTSTAGE1_FLAGS_TO_PASS) \
+
+maybe-clean-stage2-ld: clean-stage2-ld
+clean-stage2-ld:
+ @[ -f ld/Makefile ] || [ -f stage2-ld/Makefile ] \
+ || exit 0 ; \
+ [ -f ld/Makefile ] || $(MAKE) stage2-start ; \
+ cd ld && \
+ $(MAKE) $(FLAGS_TO_PASS) \
+ $(POSTSTAGE1_FLAGS_TO_PASS) \
+ clean
@endif ld-bootstrap
+
.PHONY: configure-stage2-libcpp maybe-configure-stage2-libcpp
.PHONY: all-stage2-libcpp maybe-all-stage2-libcpp
+.PHONY: clean-stage2-libcpp maybe-clean-stage2-libcpp
maybe-configure-stage2-libcpp:
maybe-all-stage2-libcpp:
+maybe-clean-stage2-libcpp:
@if libcpp-bootstrap
maybe-configure-stage2-libcpp: configure-stage2-libcpp
$(MAKE) $(FLAGS_TO_PASS) \
$(POSTSTAGE1_FLAGS_TO_PASS) \
+
+maybe-clean-stage2-libcpp: clean-stage2-libcpp
+clean-stage2-libcpp:
+ @[ -f libcpp/Makefile ] || [ -f stage2-libcpp/Makefile ] \
+ || exit 0 ; \
+ [ -f libcpp/Makefile ] || $(MAKE) stage2-start ; \
+ cd libcpp && \
+ $(MAKE) $(FLAGS_TO_PASS) \
+ $(POSTSTAGE1_FLAGS_TO_PASS) \
+ clean
@endif libcpp-bootstrap
+
.PHONY: configure-stage2-libbanshee maybe-configure-stage2-libbanshee
.PHONY: all-stage2-libbanshee maybe-all-stage2-libbanshee
+.PHONY: clean-stage2-libbanshee maybe-clean-stage2-libbanshee
maybe-configure-stage2-libbanshee:
maybe-all-stage2-libbanshee:
+maybe-clean-stage2-libbanshee:
@if libbanshee-bootstrap
maybe-configure-stage2-libbanshee: configure-stage2-libbanshee
$(MAKE) $(FLAGS_TO_PASS) \
$(POSTSTAGE1_FLAGS_TO_PASS) \
+
+maybe-clean-stage2-libbanshee: clean-stage2-libbanshee
+clean-stage2-libbanshee:
+ @[ -f libbanshee/Makefile ] || [ -f stage2-libbanshee/Makefile ] \
+ || exit 0 ; \
+ [ -f libbanshee/Makefile ] || $(MAKE) stage2-start ; \
+ cd libbanshee && \
+ $(MAKE) $(FLAGS_TO_PASS) \
+ $(POSTSTAGE1_FLAGS_TO_PASS) \
+ clean
@endif libbanshee-bootstrap
+
.PHONY: configure-stage2-libiberty maybe-configure-stage2-libiberty
.PHONY: all-stage2-libiberty maybe-all-stage2-libiberty
+.PHONY: clean-stage2-libiberty maybe-clean-stage2-libiberty
maybe-configure-stage2-libiberty:
maybe-all-stage2-libiberty:
+maybe-clean-stage2-libiberty:
@if libiberty-bootstrap
maybe-configure-stage2-libiberty: configure-stage2-libiberty
$(MAKE) $(FLAGS_TO_PASS) \
$(POSTSTAGE1_FLAGS_TO_PASS) \
+
+maybe-clean-stage2-libiberty: clean-stage2-libiberty
+clean-stage2-libiberty:
+ @[ -f libiberty/Makefile ] || [ -f stage2-libiberty/Makefile ] \
+ || exit 0 ; \
+ [ -f libiberty/Makefile ] || $(MAKE) stage2-start ; \
+ cd libiberty && \
+ $(MAKE) $(FLAGS_TO_PASS) \
+ $(POSTSTAGE1_FLAGS_TO_PASS) \
+ clean
@endif libiberty-bootstrap
+
.PHONY: configure-stage2-zlib maybe-configure-stage2-zlib
.PHONY: all-stage2-zlib maybe-all-stage2-zlib
+.PHONY: clean-stage2-zlib maybe-clean-stage2-zlib
maybe-configure-stage2-zlib:
maybe-all-stage2-zlib:
+maybe-clean-stage2-zlib:
@if zlib-bootstrap
maybe-configure-stage2-zlib: configure-stage2-zlib
$(MAKE) $(FLAGS_TO_PASS) \
$(POSTSTAGE1_FLAGS_TO_PASS) \
+
+maybe-clean-stage2-zlib: clean-stage2-zlib
+clean-stage2-zlib:
+ @[ -f zlib/Makefile ] || [ -f stage2-zlib/Makefile ] \
+ || exit 0 ; \
+ [ -f zlib/Makefile ] || $(MAKE) stage2-start ; \
+ cd zlib && \
+ $(MAKE) $(FLAGS_TO_PASS) \
+ $(POSTSTAGE1_FLAGS_TO_PASS) \
+ clean
@endif zlib-bootstrap
+
# FIXME: Will not need to be conditional when toplevel bootstrap is the
# only possibility, but now it conflicts with no-bootstrap rules
@if gcc-bootstrap
bootstrap2: stage2-bubble all
-.PHONY: distclean-stage2
-
-# Rules to wipe a stage and all the following ones, used for cleanstrap
+# Rules to wipe a stage and all the following ones, also used for cleanstrap
distclean-stage1:: distclean-stage2
+.PHONY: distclean-stage2
distclean-stage2::
[ -f stage_current ] && $(MAKE) `cat stage_current`-end || :
rm -rf stage2-*
@if test -f stage3-lean || test -f stage2-lean ; then \
echo Skipping rebuild of stage3 ; \
else \
- $(MAKE) $(RECURSE_FLAGS_TO_PASS) all-stage3; \
+ $(MAKE) $(RECURSE_FLAGS_TO_PASS) NOTPARALLEL= all-stage3; \
fi
-.PHONY: all-stage3
+.PHONY: all-stage3 clean-stage3
all-stage3: \
maybe-all-stage3-bfd \
maybe-all-stage3-opcodes \
maybe-all-stage3-libiberty \
maybe-all-stage3-zlib
+do-clean: clean-stage3
+clean-stage3: \
+ maybe-clean-stage3-bfd \
+ maybe-clean-stage3-opcodes \
+ maybe-clean-stage3-binutils \
+ maybe-clean-stage3-gas \
+ maybe-clean-stage3-gcc \
+ maybe-clean-stage3-intl \
+ maybe-clean-stage3-ld \
+ maybe-clean-stage3-libcpp \
+ maybe-clean-stage3-libbanshee \
+ maybe-clean-stage3-libiberty \
+ maybe-clean-stage3-zlib
+
.PHONY: configure-stage3-bfd maybe-configure-stage3-bfd
.PHONY: all-stage3-bfd maybe-all-stage3-bfd
+.PHONY: clean-stage3-bfd maybe-clean-stage3-bfd
maybe-configure-stage3-bfd:
maybe-all-stage3-bfd:
+maybe-clean-stage3-bfd:
@if bfd-bootstrap
maybe-configure-stage3-bfd: configure-stage3-bfd
$(MAKE) $(FLAGS_TO_PASS) \
$(POSTSTAGE1_FLAGS_TO_PASS) \
+
+maybe-clean-stage3-bfd: clean-stage3-bfd
+clean-stage3-bfd:
+ @[ -f bfd/Makefile ] || [ -f stage3-bfd/Makefile ] \
+ || exit 0 ; \
+ [ -f bfd/Makefile ] || $(MAKE) stage3-start ; \
+ cd bfd && \
+ $(MAKE) $(FLAGS_TO_PASS) \
+ $(POSTSTAGE1_FLAGS_TO_PASS) \
+ clean
@endif bfd-bootstrap
+
.PHONY: configure-stage3-opcodes maybe-configure-stage3-opcodes
.PHONY: all-stage3-opcodes maybe-all-stage3-opcodes
+.PHONY: clean-stage3-opcodes maybe-clean-stage3-opcodes
maybe-configure-stage3-opcodes:
maybe-all-stage3-opcodes:
+maybe-clean-stage3-opcodes:
@if opcodes-bootstrap
maybe-configure-stage3-opcodes: configure-stage3-opcodes
$(MAKE) $(FLAGS_TO_PASS) \
$(POSTSTAGE1_FLAGS_TO_PASS) \
+
+maybe-clean-stage3-opcodes: clean-stage3-opcodes
+clean-stage3-opcodes:
+ @[ -f opcodes/Makefile ] || [ -f stage3-opcodes/Makefile ] \
+ || exit 0 ; \
+ [ -f opcodes/Makefile ] || $(MAKE) stage3-start ; \
+ cd opcodes && \
+ $(MAKE) $(FLAGS_TO_PASS) \
+ $(POSTSTAGE1_FLAGS_TO_PASS) \
+ clean
@endif opcodes-bootstrap
+
.PHONY: configure-stage3-binutils maybe-configure-stage3-binutils
.PHONY: all-stage3-binutils maybe-all-stage3-binutils
+.PHONY: clean-stage3-binutils maybe-clean-stage3-binutils
maybe-configure-stage3-binutils:
maybe-all-stage3-binutils:
+maybe-clean-stage3-binutils:
@if binutils-bootstrap
maybe-configure-stage3-binutils: configure-stage3-binutils
$(MAKE) $(FLAGS_TO_PASS) \
$(POSTSTAGE1_FLAGS_TO_PASS) \
+
+maybe-clean-stage3-binutils: clean-stage3-binutils
+clean-stage3-binutils:
+ @[ -f binutils/Makefile ] || [ -f stage3-binutils/Makefile ] \
+ || exit 0 ; \
+ [ -f binutils/Makefile ] || $(MAKE) stage3-start ; \
+ cd binutils && \
+ $(MAKE) $(FLAGS_TO_PASS) \
+ $(POSTSTAGE1_FLAGS_TO_PASS) \
+ clean
@endif binutils-bootstrap
+
.PHONY: configure-stage3-gas maybe-configure-stage3-gas
.PHONY: all-stage3-gas maybe-all-stage3-gas
+.PHONY: clean-stage3-gas maybe-clean-stage3-gas
maybe-configure-stage3-gas:
maybe-all-stage3-gas:
+maybe-clean-stage3-gas:
@if gas-bootstrap
maybe-configure-stage3-gas: configure-stage3-gas
$(MAKE) $(FLAGS_TO_PASS) \
$(POSTSTAGE1_FLAGS_TO_PASS) \
+
+maybe-clean-stage3-gas: clean-stage3-gas
+clean-stage3-gas:
+ @[ -f gas/Makefile ] || [ -f stage3-gas/Makefile ] \
+ || exit 0 ; \
+ [ -f gas/Makefile ] || $(MAKE) stage3-start ; \
+ cd gas && \
+ $(MAKE) $(FLAGS_TO_PASS) \
+ $(POSTSTAGE1_FLAGS_TO_PASS) \
+ clean
@endif gas-bootstrap
+
.PHONY: configure-stage3-gcc maybe-configure-stage3-gcc
.PHONY: all-stage3-gcc maybe-all-stage3-gcc
+.PHONY: clean-stage3-gcc maybe-clean-stage3-gcc
maybe-configure-stage3-gcc:
maybe-all-stage3-gcc:
+maybe-clean-stage3-gcc:
@if gcc-bootstrap
maybe-configure-stage3-gcc: configure-stage3-gcc
$(MAKE) $(FLAGS_TO_PASS) \
$(POSTSTAGE1_FLAGS_TO_PASS) \
$(EXTRA_GCC_FLAGS)
+
+maybe-clean-stage3-gcc: clean-stage3-gcc
+clean-stage3-gcc:
+ @[ -f gcc/Makefile ] || [ -f stage3-gcc/Makefile ] \
+ || exit 0 ; \
+ [ -f gcc/Makefile ] || $(MAKE) stage3-start ; \
+ cd gcc && \
+ $(MAKE) $(FLAGS_TO_PASS) \
+ $(POSTSTAGE1_FLAGS_TO_PASS) \
+ $(EXTRA_GCC_FLAGS) clean
@endif gcc-bootstrap
+
.PHONY: configure-stage3-intl maybe-configure-stage3-intl
.PHONY: all-stage3-intl maybe-all-stage3-intl
+.PHONY: clean-stage3-intl maybe-clean-stage3-intl
maybe-configure-stage3-intl:
maybe-all-stage3-intl:
+maybe-clean-stage3-intl:
@if intl-bootstrap
maybe-configure-stage3-intl: configure-stage3-intl
$(MAKE) $(FLAGS_TO_PASS) \
$(POSTSTAGE1_FLAGS_TO_PASS) \
+
+maybe-clean-stage3-intl: clean-stage3-intl
+clean-stage3-intl:
+ @[ -f intl/Makefile ] || [ -f stage3-intl/Makefile ] \
+ || exit 0 ; \
+ [ -f intl/Makefile ] || $(MAKE) stage3-start ; \
+ cd intl && \
+ $(MAKE) $(FLAGS_TO_PASS) \
+ $(POSTSTAGE1_FLAGS_TO_PASS) \
+ clean
@endif intl-bootstrap
+
.PHONY: configure-stage3-ld maybe-configure-stage3-ld
.PHONY: all-stage3-ld maybe-all-stage3-ld
+.PHONY: clean-stage3-ld maybe-clean-stage3-ld
maybe-configure-stage3-ld:
maybe-all-stage3-ld:
+maybe-clean-stage3-ld:
@if ld-bootstrap
maybe-configure-stage3-ld: configure-stage3-ld
$(MAKE) $(FLAGS_TO_PASS) \
$(POSTSTAGE1_FLAGS_TO_PASS) \
+
+maybe-clean-stage3-ld: clean-stage3-ld
+clean-stage3-ld:
+ @[ -f ld/Makefile ] || [ -f stage3-ld/Makefile ] \
+ || exit 0 ; \
+ [ -f ld/Makefile ] || $(MAKE) stage3-start ; \
+ cd ld && \
+ $(MAKE) $(FLAGS_TO_PASS) \
+ $(POSTSTAGE1_FLAGS_TO_PASS) \
+ clean
@endif ld-bootstrap
+
.PHONY: configure-stage3-libcpp maybe-configure-stage3-libcpp
.PHONY: all-stage3-libcpp maybe-all-stage3-libcpp
+.PHONY: clean-stage3-libcpp maybe-clean-stage3-libcpp
maybe-configure-stage3-libcpp:
maybe-all-stage3-libcpp:
+maybe-clean-stage3-libcpp:
@if libcpp-bootstrap
maybe-configure-stage3-libcpp: configure-stage3-libcpp
$(MAKE) $(FLAGS_TO_PASS) \
$(POSTSTAGE1_FLAGS_TO_PASS) \
+
+maybe-clean-stage3-libcpp: clean-stage3-libcpp
+clean-stage3-libcpp:
+ @[ -f libcpp/Makefile ] || [ -f stage3-libcpp/Makefile ] \
+ || exit 0 ; \
+ [ -f libcpp/Makefile ] || $(MAKE) stage3-start ; \
+ cd libcpp && \
+ $(MAKE) $(FLAGS_TO_PASS) \
+ $(POSTSTAGE1_FLAGS_TO_PASS) \
+ clean
@endif libcpp-bootstrap
+
.PHONY: configure-stage3-libbanshee maybe-configure-stage3-libbanshee
.PHONY: all-stage3-libbanshee maybe-all-stage3-libbanshee
+.PHONY: clean-stage3-libbanshee maybe-clean-stage3-libbanshee
maybe-configure-stage3-libbanshee:
maybe-all-stage3-libbanshee:
+maybe-clean-stage3-libbanshee:
@if libbanshee-bootstrap
maybe-configure-stage3-libbanshee: configure-stage3-libbanshee
$(MAKE) $(FLAGS_TO_PASS) \
$(POSTSTAGE1_FLAGS_TO_PASS) \
+
+maybe-clean-stage3-libbanshee: clean-stage3-libbanshee
+clean-stage3-libbanshee:
+ @[ -f libbanshee/Makefile ] || [ -f stage3-libbanshee/Makefile ] \
+ || exit 0 ; \
+ [ -f libbanshee/Makefile ] || $(MAKE) stage3-start ; \
+ cd libbanshee && \
+ $(MAKE) $(FLAGS_TO_PASS) \
+ $(POSTSTAGE1_FLAGS_TO_PASS) \
+ clean
@endif libbanshee-bootstrap
+
.PHONY: configure-stage3-libiberty maybe-configure-stage3-libiberty
.PHONY: all-stage3-libiberty maybe-all-stage3-libiberty
+.PHONY: clean-stage3-libiberty maybe-clean-stage3-libiberty
maybe-configure-stage3-libiberty:
maybe-all-stage3-libiberty:
+maybe-clean-stage3-libiberty:
@if libiberty-bootstrap
maybe-configure-stage3-libiberty: configure-stage3-libiberty
$(MAKE) $(FLAGS_TO_PASS) \
$(POSTSTAGE1_FLAGS_TO_PASS) \
+
+maybe-clean-stage3-libiberty: clean-stage3-libiberty
+clean-stage3-libiberty:
+ @[ -f libiberty/Makefile ] || [ -f stage3-libiberty/Makefile ] \
+ || exit 0 ; \
+ [ -f libiberty/Makefile ] || $(MAKE) stage3-start ; \
+ cd libiberty && \
+ $(MAKE) $(FLAGS_TO_PASS) \
+ $(POSTSTAGE1_FLAGS_TO_PASS) \
+ clean
@endif libiberty-bootstrap
+
.PHONY: configure-stage3-zlib maybe-configure-stage3-zlib
.PHONY: all-stage3-zlib maybe-all-stage3-zlib
+.PHONY: clean-stage3-zlib maybe-clean-stage3-zlib
maybe-configure-stage3-zlib:
maybe-all-stage3-zlib:
+maybe-clean-stage3-zlib:
@if zlib-bootstrap
maybe-configure-stage3-zlib: configure-stage3-zlib
$(MAKE) $(FLAGS_TO_PASS) \
$(POSTSTAGE1_FLAGS_TO_PASS) \
+
+maybe-clean-stage3-zlib: clean-stage3-zlib
+clean-stage3-zlib:
+ @[ -f zlib/Makefile ] || [ -f stage3-zlib/Makefile ] \
+ || exit 0 ; \
+ [ -f zlib/Makefile ] || $(MAKE) stage3-start ; \
+ cd zlib && \
+ $(MAKE) $(FLAGS_TO_PASS) \
+ $(POSTSTAGE1_FLAGS_TO_PASS) \
+ clean
@endif zlib-bootstrap
+
# FIXME: Will not need to be conditional when toplevel bootstrap is the
# only possibility, but now it conflicts with no-bootstrap rules
@if gcc-bootstrap
bootstrap: stage3-bubble compare all
-.PHONY: distclean-stage3
-
-# Rules to wipe a stage and all the following ones, used for cleanstrap
+# Rules to wipe a stage and all the following ones, also used for cleanstrap
distclean-stage2:: distclean-stage3
+.PHONY: distclean-stage3
distclean-stage3::
[ -f stage_current ] && $(MAKE) `cat stage_current`-end || :
rm -rf stage3-* compare
.PHONY: cleanstrap
-cleanstrap: distclean-stage1 bootstrap
+cleanstrap: distclean bootstrap
@endif gcc-bootstrap
@if test -f stage4-lean || test -f stage3-lean ; then \
echo Skipping rebuild of stage4 ; \
else \
- $(MAKE) $(RECURSE_FLAGS_TO_PASS) all-stage4; \
+ $(MAKE) $(RECURSE_FLAGS_TO_PASS) NOTPARALLEL= all-stage4; \
fi
-.PHONY: all-stage4
+.PHONY: all-stage4 clean-stage4
all-stage4: \
maybe-all-stage4-bfd \
maybe-all-stage4-opcodes \
maybe-all-stage4-libiberty \
maybe-all-stage4-zlib
+do-clean: clean-stage4
+clean-stage4: \
+ maybe-clean-stage4-bfd \
+ maybe-clean-stage4-opcodes \
+ maybe-clean-stage4-binutils \
+ maybe-clean-stage4-gas \
+ maybe-clean-stage4-gcc \
+ maybe-clean-stage4-intl \
+ maybe-clean-stage4-ld \
+ maybe-clean-stage4-libcpp \
+ maybe-clean-stage4-libbanshee \
+ maybe-clean-stage4-libiberty \
+ maybe-clean-stage4-zlib
+
.PHONY: configure-stage4-bfd maybe-configure-stage4-bfd
.PHONY: all-stage4-bfd maybe-all-stage4-bfd
+.PHONY: clean-stage4-bfd maybe-clean-stage4-bfd
maybe-configure-stage4-bfd:
maybe-all-stage4-bfd:
+maybe-clean-stage4-bfd:
@if bfd-bootstrap
maybe-configure-stage4-bfd: configure-stage4-bfd
$(MAKE) $(FLAGS_TO_PASS) \
$(POSTSTAGE1_FLAGS_TO_PASS) \
+
+maybe-clean-stage4-bfd: clean-stage4-bfd
+clean-stage4-bfd:
+ @[ -f bfd/Makefile ] || [ -f stage4-bfd/Makefile ] \
+ || exit 0 ; \
+ [ -f bfd/Makefile ] || $(MAKE) stage4-start ; \
+ cd bfd && \
+ $(MAKE) $(FLAGS_TO_PASS) \
+ $(POSTSTAGE1_FLAGS_TO_PASS) \
+ clean
@endif bfd-bootstrap
+
.PHONY: configure-stage4-opcodes maybe-configure-stage4-opcodes
.PHONY: all-stage4-opcodes maybe-all-stage4-opcodes
+.PHONY: clean-stage4-opcodes maybe-clean-stage4-opcodes
maybe-configure-stage4-opcodes:
maybe-all-stage4-opcodes:
+maybe-clean-stage4-opcodes:
@if opcodes-bootstrap
maybe-configure-stage4-opcodes: configure-stage4-opcodes
$(MAKE) $(FLAGS_TO_PASS) \
$(POSTSTAGE1_FLAGS_TO_PASS) \
+
+maybe-clean-stage4-opcodes: clean-stage4-opcodes
+clean-stage4-opcodes:
+ @[ -f opcodes/Makefile ] || [ -f stage4-opcodes/Makefile ] \
+ || exit 0 ; \
+ [ -f opcodes/Makefile ] || $(MAKE) stage4-start ; \
+ cd opcodes && \
+ $(MAKE) $(FLAGS_TO_PASS) \
+ $(POSTSTAGE1_FLAGS_TO_PASS) \
+ clean
@endif opcodes-bootstrap
+
.PHONY: configure-stage4-binutils maybe-configure-stage4-binutils
.PHONY: all-stage4-binutils maybe-all-stage4-binutils
+.PHONY: clean-stage4-binutils maybe-clean-stage4-binutils
maybe-configure-stage4-binutils:
maybe-all-stage4-binutils:
+maybe-clean-stage4-binutils:
@if binutils-bootstrap
maybe-configure-stage4-binutils: configure-stage4-binutils
$(MAKE) $(FLAGS_TO_PASS) \
$(POSTSTAGE1_FLAGS_TO_PASS) \
+
+maybe-clean-stage4-binutils: clean-stage4-binutils
+clean-stage4-binutils:
+ @[ -f binutils/Makefile ] || [ -f stage4-binutils/Makefile ] \
+ || exit 0 ; \
+ [ -f binutils/Makefile ] || $(MAKE) stage4-start ; \
+ cd binutils && \
+ $(MAKE) $(FLAGS_TO_PASS) \
+ $(POSTSTAGE1_FLAGS_TO_PASS) \
+ clean
@endif binutils-bootstrap
+
.PHONY: configure-stage4-gas maybe-configure-stage4-gas
.PHONY: all-stage4-gas maybe-all-stage4-gas
+.PHONY: clean-stage4-gas maybe-clean-stage4-gas
maybe-configure-stage4-gas:
maybe-all-stage4-gas:
+maybe-clean-stage4-gas:
@if gas-bootstrap
maybe-configure-stage4-gas: configure-stage4-gas
$(MAKE) $(FLAGS_TO_PASS) \
$(POSTSTAGE1_FLAGS_TO_PASS) \
+
+maybe-clean-stage4-gas: clean-stage4-gas
+clean-stage4-gas:
+ @[ -f gas/Makefile ] || [ -f stage4-gas/Makefile ] \
+ || exit 0 ; \
+ [ -f gas/Makefile ] || $(MAKE) stage4-start ; \
+ cd gas && \
+ $(MAKE) $(FLAGS_TO_PASS) \
+ $(POSTSTAGE1_FLAGS_TO_PASS) \
+ clean
@endif gas-bootstrap
+
.PHONY: configure-stage4-gcc maybe-configure-stage4-gcc
.PHONY: all-stage4-gcc maybe-all-stage4-gcc
+.PHONY: clean-stage4-gcc maybe-clean-stage4-gcc
maybe-configure-stage4-gcc:
maybe-all-stage4-gcc:
+maybe-clean-stage4-gcc:
@if gcc-bootstrap
maybe-configure-stage4-gcc: configure-stage4-gcc
$(MAKE) $(FLAGS_TO_PASS) \
$(POSTSTAGE1_FLAGS_TO_PASS) \
$(EXTRA_GCC_FLAGS)
+
+maybe-clean-stage4-gcc: clean-stage4-gcc
+clean-stage4-gcc:
+ @[ -f gcc/Makefile ] || [ -f stage4-gcc/Makefile ] \
+ || exit 0 ; \
+ [ -f gcc/Makefile ] || $(MAKE) stage4-start ; \
+ cd gcc && \
+ $(MAKE) $(FLAGS_TO_PASS) \
+ $(POSTSTAGE1_FLAGS_TO_PASS) \
+ $(EXTRA_GCC_FLAGS) clean
@endif gcc-bootstrap
+
.PHONY: configure-stage4-intl maybe-configure-stage4-intl
.PHONY: all-stage4-intl maybe-all-stage4-intl
+.PHONY: clean-stage4-intl maybe-clean-stage4-intl
maybe-configure-stage4-intl:
maybe-all-stage4-intl:
+maybe-clean-stage4-intl:
@if intl-bootstrap
maybe-configure-stage4-intl: configure-stage4-intl
$(MAKE) $(FLAGS_TO_PASS) \
$(POSTSTAGE1_FLAGS_TO_PASS) \
+
+maybe-clean-stage4-intl: clean-stage4-intl
+clean-stage4-intl:
+ @[ -f intl/Makefile ] || [ -f stage4-intl/Makefile ] \
+ || exit 0 ; \
+ [ -f intl/Makefile ] || $(MAKE) stage4-start ; \
+ cd intl && \
+ $(MAKE) $(FLAGS_TO_PASS) \
+ $(POSTSTAGE1_FLAGS_TO_PASS) \
+ clean
@endif intl-bootstrap
+
.PHONY: configure-stage4-ld maybe-configure-stage4-ld
.PHONY: all-stage4-ld maybe-all-stage4-ld
+.PHONY: clean-stage4-ld maybe-clean-stage4-ld
maybe-configure-stage4-ld:
maybe-all-stage4-ld:
+maybe-clean-stage4-ld:
@if ld-bootstrap
maybe-configure-stage4-ld: configure-stage4-ld
$(MAKE) $(FLAGS_TO_PASS) \
$(POSTSTAGE1_FLAGS_TO_PASS) \
+
+maybe-clean-stage4-ld: clean-stage4-ld
+clean-stage4-ld:
+ @[ -f ld/Makefile ] || [ -f stage4-ld/Makefile ] \
+ || exit 0 ; \
+ [ -f ld/Makefile ] || $(MAKE) stage4-start ; \
+ cd ld && \
+ $(MAKE) $(FLAGS_TO_PASS) \
+ $(POSTSTAGE1_FLAGS_TO_PASS) \
+ clean
@endif ld-bootstrap
+
.PHONY: configure-stage4-libcpp maybe-configure-stage4-libcpp
.PHONY: all-stage4-libcpp maybe-all-stage4-libcpp
+.PHONY: clean-stage4-libcpp maybe-clean-stage4-libcpp
maybe-configure-stage4-libcpp:
maybe-all-stage4-libcpp:
+maybe-clean-stage4-libcpp:
@if libcpp-bootstrap
maybe-configure-stage4-libcpp: configure-stage4-libcpp
$(MAKE) $(FLAGS_TO_PASS) \
$(POSTSTAGE1_FLAGS_TO_PASS) \
+
+maybe-clean-stage4-libcpp: clean-stage4-libcpp
+clean-stage4-libcpp:
+ @[ -f libcpp/Makefile ] || [ -f stage4-libcpp/Makefile ] \
+ || exit 0 ; \
+ [ -f libcpp/Makefile ] || $(MAKE) stage4-start ; \
+ cd libcpp && \
+ $(MAKE) $(FLAGS_TO_PASS) \
+ $(POSTSTAGE1_FLAGS_TO_PASS) \
+ clean
@endif libcpp-bootstrap
+
.PHONY: configure-stage4-libbanshee maybe-configure-stage4-libbanshee
.PHONY: all-stage4-libbanshee maybe-all-stage4-libbanshee
+.PHONY: clean-stage4-libbanshee maybe-clean-stage4-libbanshee
maybe-configure-stage4-libbanshee:
maybe-all-stage4-libbanshee:
+maybe-clean-stage4-libbanshee:
@if libbanshee-bootstrap
maybe-configure-stage4-libbanshee: configure-stage4-libbanshee
$(MAKE) $(FLAGS_TO_PASS) \
$(POSTSTAGE1_FLAGS_TO_PASS) \
+
+maybe-clean-stage4-libbanshee: clean-stage4-libbanshee
+clean-stage4-libbanshee:
+ @[ -f libbanshee/Makefile ] || [ -f stage4-libbanshee/Makefile ] \
+ || exit 0 ; \
+ [ -f libbanshee/Makefile ] || $(MAKE) stage4-start ; \
+ cd libbanshee && \
+ $(MAKE) $(FLAGS_TO_PASS) \
+ $(POSTSTAGE1_FLAGS_TO_PASS) \
+ clean
@endif libbanshee-bootstrap
+
.PHONY: configure-stage4-libiberty maybe-configure-stage4-libiberty
.PHONY: all-stage4-libiberty maybe-all-stage4-libiberty
+.PHONY: clean-stage4-libiberty maybe-clean-stage4-libiberty
maybe-configure-stage4-libiberty:
maybe-all-stage4-libiberty:
+maybe-clean-stage4-libiberty:
@if libiberty-bootstrap
maybe-configure-stage4-libiberty: configure-stage4-libiberty
$(MAKE) $(FLAGS_TO_PASS) \
$(POSTSTAGE1_FLAGS_TO_PASS) \
+
+maybe-clean-stage4-libiberty: clean-stage4-libiberty
+clean-stage4-libiberty:
+ @[ -f libiberty/Makefile ] || [ -f stage4-libiberty/Makefile ] \
+ || exit 0 ; \
+ [ -f libiberty/Makefile ] || $(MAKE) stage4-start ; \
+ cd libiberty && \
+ $(MAKE) $(FLAGS_TO_PASS) \
+ $(POSTSTAGE1_FLAGS_TO_PASS) \
+ clean
@endif libiberty-bootstrap
+
.PHONY: configure-stage4-zlib maybe-configure-stage4-zlib
.PHONY: all-stage4-zlib maybe-all-stage4-zlib
+.PHONY: clean-stage4-zlib maybe-clean-stage4-zlib
maybe-configure-stage4-zlib:
maybe-all-stage4-zlib:
+maybe-clean-stage4-zlib:
@if zlib-bootstrap
maybe-configure-stage4-zlib: configure-stage4-zlib
$(MAKE) $(FLAGS_TO_PASS) \
$(POSTSTAGE1_FLAGS_TO_PASS) \
+
+maybe-clean-stage4-zlib: clean-stage4-zlib
+clean-stage4-zlib:
+ @[ -f zlib/Makefile ] || [ -f stage4-zlib/Makefile ] \
+ || exit 0 ; \
+ [ -f zlib/Makefile ] || $(MAKE) stage4-start ; \
+ cd zlib && \
+ $(MAKE) $(FLAGS_TO_PASS) \
+ $(POSTSTAGE1_FLAGS_TO_PASS) \
+ clean
@endif zlib-bootstrap
+
# FIXME: Will not need to be conditional when toplevel bootstrap is the
# only possibility, but now it conflicts with no-bootstrap rules
@if gcc-bootstrap
bootstrap4: stage4-bubble compare3 all
-.PHONY: distclean-stage4
-
-# Rules to wipe a stage and all the following ones, used for cleanstrap
+# Rules to wipe a stage and all the following ones, also used for cleanstrap
distclean-stage3:: distclean-stage4
+.PHONY: distclean-stage4
distclean-stage4::
[ -f stage_current ] && $(MAKE) `cat stage_current`-end || :
rm -rf stage4-* compare3
@if test -f stageprofile-lean || test -f stage1-lean ; then \
echo Skipping rebuild of stageprofile ; \
else \
- $(MAKE) $(RECURSE_FLAGS_TO_PASS) all-stageprofile; \
+ $(MAKE) $(RECURSE_FLAGS_TO_PASS) NOTPARALLEL= all-stageprofile; \
fi
-.PHONY: all-stageprofile
+.PHONY: all-stageprofile clean-stageprofile
all-stageprofile: \
maybe-all-stageprofile-bfd \
maybe-all-stageprofile-opcodes \
maybe-all-stageprofile-libiberty \
maybe-all-stageprofile-zlib
+do-clean: clean-stageprofile
+clean-stageprofile: \
+ maybe-clean-stageprofile-bfd \
+ maybe-clean-stageprofile-opcodes \
+ maybe-clean-stageprofile-binutils \
+ maybe-clean-stageprofile-gas \
+ maybe-clean-stageprofile-gcc \
+ maybe-clean-stageprofile-intl \
+ maybe-clean-stageprofile-ld \
+ maybe-clean-stageprofile-libcpp \
+ maybe-clean-stageprofile-libbanshee \
+ maybe-clean-stageprofile-libiberty \
+ maybe-clean-stageprofile-zlib
+
.PHONY: configure-stageprofile-bfd maybe-configure-stageprofile-bfd
.PHONY: all-stageprofile-bfd maybe-all-stageprofile-bfd
+.PHONY: clean-stageprofile-bfd maybe-clean-stageprofile-bfd
maybe-configure-stageprofile-bfd:
maybe-all-stageprofile-bfd:
+maybe-clean-stageprofile-bfd:
@if bfd-bootstrap
maybe-configure-stageprofile-bfd: configure-stageprofile-bfd
$(MAKE) $(FLAGS_TO_PASS) \
$(POSTSTAGE1_FLAGS_TO_PASS) \
CFLAGS="$(BOOT_CFLAGS) -fprofile-generate"
+
+maybe-clean-stageprofile-bfd: clean-stageprofile-bfd
+clean-stageprofile-bfd:
+ @[ -f bfd/Makefile ] || [ -f stageprofile-bfd/Makefile ] \
+ || exit 0 ; \
+ [ -f bfd/Makefile ] || $(MAKE) stageprofile-start ; \
+ cd bfd && \
+ $(MAKE) $(FLAGS_TO_PASS) \
+ $(POSTSTAGE1_FLAGS_TO_PASS) \
+ CFLAGS="$(BOOT_CFLAGS) -fprofile-generate" clean
@endif bfd-bootstrap
+
.PHONY: configure-stageprofile-opcodes maybe-configure-stageprofile-opcodes
.PHONY: all-stageprofile-opcodes maybe-all-stageprofile-opcodes
+.PHONY: clean-stageprofile-opcodes maybe-clean-stageprofile-opcodes
maybe-configure-stageprofile-opcodes:
maybe-all-stageprofile-opcodes:
+maybe-clean-stageprofile-opcodes:
@if opcodes-bootstrap
maybe-configure-stageprofile-opcodes: configure-stageprofile-opcodes
$(MAKE) $(FLAGS_TO_PASS) \
$(POSTSTAGE1_FLAGS_TO_PASS) \
CFLAGS="$(BOOT_CFLAGS) -fprofile-generate"
+
+maybe-clean-stageprofile-opcodes: clean-stageprofile-opcodes
+clean-stageprofile-opcodes:
+ @[ -f opcodes/Makefile ] || [ -f stageprofile-opcodes/Makefile ] \
+ || exit 0 ; \
+ [ -f opcodes/Makefile ] || $(MAKE) stageprofile-start ; \
+ cd opcodes && \
+ $(MAKE) $(FLAGS_TO_PASS) \
+ $(POSTSTAGE1_FLAGS_TO_PASS) \
+ CFLAGS="$(BOOT_CFLAGS) -fprofile-generate" clean
@endif opcodes-bootstrap
+
.PHONY: configure-stageprofile-binutils maybe-configure-stageprofile-binutils
.PHONY: all-stageprofile-binutils maybe-all-stageprofile-binutils
+.PHONY: clean-stageprofile-binutils maybe-clean-stageprofile-binutils
maybe-configure-stageprofile-binutils:
maybe-all-stageprofile-binutils:
+maybe-clean-stageprofile-binutils:
@if binutils-bootstrap
maybe-configure-stageprofile-binutils: configure-stageprofile-binutils
$(MAKE) $(FLAGS_TO_PASS) \
$(POSTSTAGE1_FLAGS_TO_PASS) \
CFLAGS="$(BOOT_CFLAGS) -fprofile-generate"
+
+maybe-clean-stageprofile-binutils: clean-stageprofile-binutils
+clean-stageprofile-binutils:
+ @[ -f binutils/Makefile ] || [ -f stageprofile-binutils/Makefile ] \
+ || exit 0 ; \
+ [ -f binutils/Makefile ] || $(MAKE) stageprofile-start ; \
+ cd binutils && \
+ $(MAKE) $(FLAGS_TO_PASS) \
+ $(POSTSTAGE1_FLAGS_TO_PASS) \
+ CFLAGS="$(BOOT_CFLAGS) -fprofile-generate" clean
@endif binutils-bootstrap
+
.PHONY: configure-stageprofile-gas maybe-configure-stageprofile-gas
.PHONY: all-stageprofile-gas maybe-all-stageprofile-gas
+.PHONY: clean-stageprofile-gas maybe-clean-stageprofile-gas
maybe-configure-stageprofile-gas:
maybe-all-stageprofile-gas:
+maybe-clean-stageprofile-gas:
@if gas-bootstrap
maybe-configure-stageprofile-gas: configure-stageprofile-gas
$(MAKE) $(FLAGS_TO_PASS) \
$(POSTSTAGE1_FLAGS_TO_PASS) \
CFLAGS="$(BOOT_CFLAGS) -fprofile-generate"
+
+maybe-clean-stageprofile-gas: clean-stageprofile-gas
+clean-stageprofile-gas:
+ @[ -f gas/Makefile ] || [ -f stageprofile-gas/Makefile ] \
+ || exit 0 ; \
+ [ -f gas/Makefile ] || $(MAKE) stageprofile-start ; \
+ cd gas && \
+ $(MAKE) $(FLAGS_TO_PASS) \
+ $(POSTSTAGE1_FLAGS_TO_PASS) \
+ CFLAGS="$(BOOT_CFLAGS) -fprofile-generate" clean
@endif gas-bootstrap
+
.PHONY: configure-stageprofile-gcc maybe-configure-stageprofile-gcc
.PHONY: all-stageprofile-gcc maybe-all-stageprofile-gcc
+.PHONY: clean-stageprofile-gcc maybe-clean-stageprofile-gcc
maybe-configure-stageprofile-gcc:
maybe-all-stageprofile-gcc:
+maybe-clean-stageprofile-gcc:
@if gcc-bootstrap
maybe-configure-stageprofile-gcc: configure-stageprofile-gcc
$(MAKE) $(FLAGS_TO_PASS) \
$(POSTSTAGE1_FLAGS_TO_PASS) \
CFLAGS="$(BOOT_CFLAGS) -fprofile-generate" $(EXTRA_GCC_FLAGS)
+
+maybe-clean-stageprofile-gcc: clean-stageprofile-gcc
+clean-stageprofile-gcc:
+ @[ -f gcc/Makefile ] || [ -f stageprofile-gcc/Makefile ] \
+ || exit 0 ; \
+ [ -f gcc/Makefile ] || $(MAKE) stageprofile-start ; \
+ cd gcc && \
+ $(MAKE) $(FLAGS_TO_PASS) \
+ $(POSTSTAGE1_FLAGS_TO_PASS) \
+ CFLAGS="$(BOOT_CFLAGS) -fprofile-generate" $(EXTRA_GCC_FLAGS) clean
@endif gcc-bootstrap
+
.PHONY: configure-stageprofile-intl maybe-configure-stageprofile-intl
.PHONY: all-stageprofile-intl maybe-all-stageprofile-intl
+.PHONY: clean-stageprofile-intl maybe-clean-stageprofile-intl
maybe-configure-stageprofile-intl:
maybe-all-stageprofile-intl:
+maybe-clean-stageprofile-intl:
@if intl-bootstrap
maybe-configure-stageprofile-intl: configure-stageprofile-intl
$(MAKE) $(FLAGS_TO_PASS) \
$(POSTSTAGE1_FLAGS_TO_PASS) \
CFLAGS="$(BOOT_CFLAGS) -fprofile-generate"
+
+maybe-clean-stageprofile-intl: clean-stageprofile-intl
+clean-stageprofile-intl:
+ @[ -f intl/Makefile ] || [ -f stageprofile-intl/Makefile ] \
+ || exit 0 ; \
+ [ -f intl/Makefile ] || $(MAKE) stageprofile-start ; \
+ cd intl && \
+ $(MAKE) $(FLAGS_TO_PASS) \
+ $(POSTSTAGE1_FLAGS_TO_PASS) \
+ CFLAGS="$(BOOT_CFLAGS) -fprofile-generate" clean
@endif intl-bootstrap
+
.PHONY: configure-stageprofile-ld maybe-configure-stageprofile-ld
.PHONY: all-stageprofile-ld maybe-all-stageprofile-ld
+.PHONY: clean-stageprofile-ld maybe-clean-stageprofile-ld
maybe-configure-stageprofile-ld:
maybe-all-stageprofile-ld:
+maybe-clean-stageprofile-ld:
@if ld-bootstrap
maybe-configure-stageprofile-ld: configure-stageprofile-ld
$(MAKE) $(FLAGS_TO_PASS) \
$(POSTSTAGE1_FLAGS_TO_PASS) \
CFLAGS="$(BOOT_CFLAGS) -fprofile-generate"
+
+maybe-clean-stageprofile-ld: clean-stageprofile-ld
+clean-stageprofile-ld:
+ @[ -f ld/Makefile ] || [ -f stageprofile-ld/Makefile ] \
+ || exit 0 ; \
+ [ -f ld/Makefile ] || $(MAKE) stageprofile-start ; \
+ cd ld && \
+ $(MAKE) $(FLAGS_TO_PASS) \
+ $(POSTSTAGE1_FLAGS_TO_PASS) \
+ CFLAGS="$(BOOT_CFLAGS) -fprofile-generate" clean
@endif ld-bootstrap
+
.PHONY: configure-stageprofile-libcpp maybe-configure-stageprofile-libcpp
.PHONY: all-stageprofile-libcpp maybe-all-stageprofile-libcpp
+.PHONY: clean-stageprofile-libcpp maybe-clean-stageprofile-libcpp
maybe-configure-stageprofile-libcpp:
maybe-all-stageprofile-libcpp:
+maybe-clean-stageprofile-libcpp:
@if libcpp-bootstrap
maybe-configure-stageprofile-libcpp: configure-stageprofile-libcpp
$(MAKE) $(FLAGS_TO_PASS) \
$(POSTSTAGE1_FLAGS_TO_PASS) \
CFLAGS="$(BOOT_CFLAGS) -fprofile-generate"
+
+maybe-clean-stageprofile-libcpp: clean-stageprofile-libcpp
+clean-stageprofile-libcpp:
+ @[ -f libcpp/Makefile ] || [ -f stageprofile-libcpp/Makefile ] \
+ || exit 0 ; \
+ [ -f libcpp/Makefile ] || $(MAKE) stageprofile-start ; \
+ cd libcpp && \
+ $(MAKE) $(FLAGS_TO_PASS) \
+ $(POSTSTAGE1_FLAGS_TO_PASS) \
+ CFLAGS="$(BOOT_CFLAGS) -fprofile-generate" clean
@endif libcpp-bootstrap
+
.PHONY: configure-stageprofile-libbanshee maybe-configure-stageprofile-libbanshee
.PHONY: all-stageprofile-libbanshee maybe-all-stageprofile-libbanshee
+.PHONY: clean-stageprofile-libbanshee maybe-clean-stageprofile-libbanshee
maybe-configure-stageprofile-libbanshee:
maybe-all-stageprofile-libbanshee:
+maybe-clean-stageprofile-libbanshee:
@if libbanshee-bootstrap
maybe-configure-stageprofile-libbanshee: configure-stageprofile-libbanshee
$(MAKE) $(FLAGS_TO_PASS) \
$(POSTSTAGE1_FLAGS_TO_PASS) \
CFLAGS="$(BOOT_CFLAGS) -fprofile-generate"
+
+maybe-clean-stageprofile-libbanshee: clean-stageprofile-libbanshee
+clean-stageprofile-libbanshee:
+ @[ -f libbanshee/Makefile ] || [ -f stageprofile-libbanshee/Makefile ] \
+ || exit 0 ; \
+ [ -f libbanshee/Makefile ] || $(MAKE) stageprofile-start ; \
+ cd libbanshee && \
+ $(MAKE) $(FLAGS_TO_PASS) \
+ $(POSTSTAGE1_FLAGS_TO_PASS) \
+ CFLAGS="$(BOOT_CFLAGS) -fprofile-generate" clean
@endif libbanshee-bootstrap
+
.PHONY: configure-stageprofile-libiberty maybe-configure-stageprofile-libiberty
.PHONY: all-stageprofile-libiberty maybe-all-stageprofile-libiberty
+.PHONY: clean-stageprofile-libiberty maybe-clean-stageprofile-libiberty
maybe-configure-stageprofile-libiberty:
maybe-all-stageprofile-libiberty:
+maybe-clean-stageprofile-libiberty:
@if libiberty-bootstrap
maybe-configure-stageprofile-libiberty: configure-stageprofile-libiberty
$(MAKE) $(FLAGS_TO_PASS) \
$(POSTSTAGE1_FLAGS_TO_PASS) \
CFLAGS="$(BOOT_CFLAGS) -fprofile-generate"
+
+maybe-clean-stageprofile-libiberty: clean-stageprofile-libiberty
+clean-stageprofile-libiberty:
+ @[ -f libiberty/Makefile ] || [ -f stageprofile-libiberty/Makefile ] \
+ || exit 0 ; \
+ [ -f libiberty/Makefile ] || $(MAKE) stageprofile-start ; \
+ cd libiberty && \
+ $(MAKE) $(FLAGS_TO_PASS) \
+ $(POSTSTAGE1_FLAGS_TO_PASS) \
+ CFLAGS="$(BOOT_CFLAGS) -fprofile-generate" clean
@endif libiberty-bootstrap
+
.PHONY: configure-stageprofile-zlib maybe-configure-stageprofile-zlib
.PHONY: all-stageprofile-zlib maybe-all-stageprofile-zlib
+.PHONY: clean-stageprofile-zlib maybe-clean-stageprofile-zlib
maybe-configure-stageprofile-zlib:
maybe-all-stageprofile-zlib:
+maybe-clean-stageprofile-zlib:
@if zlib-bootstrap
maybe-configure-stageprofile-zlib: configure-stageprofile-zlib
$(MAKE) $(FLAGS_TO_PASS) \
$(POSTSTAGE1_FLAGS_TO_PASS) \
CFLAGS="$(BOOT_CFLAGS) -fprofile-generate"
+
+maybe-clean-stageprofile-zlib: clean-stageprofile-zlib
+clean-stageprofile-zlib:
+ @[ -f zlib/Makefile ] || [ -f stageprofile-zlib/Makefile ] \
+ || exit 0 ; \
+ [ -f zlib/Makefile ] || $(MAKE) stageprofile-start ; \
+ cd zlib && \
+ $(MAKE) $(FLAGS_TO_PASS) \
+ $(POSTSTAGE1_FLAGS_TO_PASS) \
+ CFLAGS="$(BOOT_CFLAGS) -fprofile-generate" clean
@endif zlib-bootstrap
+
# FIXME: Will not need to be conditional when toplevel bootstrap is the
# only possibility, but now it conflicts with no-bootstrap rules
@if gcc-bootstrap
-.PHONY: distclean-stageprofile
-
-# Rules to wipe a stage and all the following ones, used for cleanstrap
+# Rules to wipe a stage and all the following ones, also used for cleanstrap
distclean-stage1:: distclean-stageprofile
+.PHONY: distclean-stageprofile
distclean-stageprofile::
[ -f stage_current ] && $(MAKE) `cat stage_current`-end || :
rm -rf stageprofile-*
@if test -f stagefeedback-lean || test -f stage1-lean ; then \
echo Skipping rebuild of stagefeedback ; \
else \
- $(MAKE) $(RECURSE_FLAGS_TO_PASS) all-stagefeedback; \
+ $(MAKE) $(RECURSE_FLAGS_TO_PASS) NOTPARALLEL= all-stagefeedback; \
fi
-.PHONY: all-stagefeedback
+.PHONY: all-stagefeedback clean-stagefeedback
all-stagefeedback: \
maybe-all-stagefeedback-bfd \
maybe-all-stagefeedback-opcodes \
maybe-all-stagefeedback-libiberty \
maybe-all-stagefeedback-zlib
+do-clean: clean-stagefeedback
+clean-stagefeedback: \
+ maybe-clean-stagefeedback-bfd \
+ maybe-clean-stagefeedback-opcodes \
+ maybe-clean-stagefeedback-binutils \
+ maybe-clean-stagefeedback-gas \
+ maybe-clean-stagefeedback-gcc \
+ maybe-clean-stagefeedback-intl \
+ maybe-clean-stagefeedback-ld \
+ maybe-clean-stagefeedback-libcpp \
+ maybe-clean-stagefeedback-libbanshee \
+ maybe-clean-stagefeedback-libiberty \
+ maybe-clean-stagefeedback-zlib
+
.PHONY: configure-stagefeedback-bfd maybe-configure-stagefeedback-bfd
.PHONY: all-stagefeedback-bfd maybe-all-stagefeedback-bfd
+.PHONY: clean-stagefeedback-bfd maybe-clean-stagefeedback-bfd
maybe-configure-stagefeedback-bfd:
maybe-all-stagefeedback-bfd:
+maybe-clean-stagefeedback-bfd:
@if bfd-bootstrap
maybe-configure-stagefeedback-bfd: configure-stagefeedback-bfd
$(MAKE) $(FLAGS_TO_PASS) \
$(POSTSTAGE1_FLAGS_TO_PASS) \
CFLAGS="$(BOOT_CFLAGS) -fprofile-use"
+
+maybe-clean-stagefeedback-bfd: clean-stagefeedback-bfd
+clean-stagefeedback-bfd:
+ @[ -f bfd/Makefile ] || [ -f stagefeedback-bfd/Makefile ] \
+ || exit 0 ; \
+ [ -f bfd/Makefile ] || $(MAKE) stagefeedback-start ; \
+ cd bfd && \
+ $(MAKE) $(FLAGS_TO_PASS) \
+ $(POSTSTAGE1_FLAGS_TO_PASS) \
+ CFLAGS="$(BOOT_CFLAGS) -fprofile-use" clean
@endif bfd-bootstrap
+
.PHONY: configure-stagefeedback-opcodes maybe-configure-stagefeedback-opcodes
.PHONY: all-stagefeedback-opcodes maybe-all-stagefeedback-opcodes
+.PHONY: clean-stagefeedback-opcodes maybe-clean-stagefeedback-opcodes
maybe-configure-stagefeedback-opcodes:
maybe-all-stagefeedback-opcodes:
+maybe-clean-stagefeedback-opcodes:
@if opcodes-bootstrap
maybe-configure-stagefeedback-opcodes: configure-stagefeedback-opcodes
$(MAKE) $(FLAGS_TO_PASS) \
$(POSTSTAGE1_FLAGS_TO_PASS) \
CFLAGS="$(BOOT_CFLAGS) -fprofile-use"
+
+maybe-clean-stagefeedback-opcodes: clean-stagefeedback-opcodes
+clean-stagefeedback-opcodes:
+ @[ -f opcodes/Makefile ] || [ -f stagefeedback-opcodes/Makefile ] \
+ || exit 0 ; \
+ [ -f opcodes/Makefile ] || $(MAKE) stagefeedback-start ; \
+ cd opcodes && \
+ $(MAKE) $(FLAGS_TO_PASS) \
+ $(POSTSTAGE1_FLAGS_TO_PASS) \
+ CFLAGS="$(BOOT_CFLAGS) -fprofile-use" clean
@endif opcodes-bootstrap
+
.PHONY: configure-stagefeedback-binutils maybe-configure-stagefeedback-binutils
.PHONY: all-stagefeedback-binutils maybe-all-stagefeedback-binutils
+.PHONY: clean-stagefeedback-binutils maybe-clean-stagefeedback-binutils
maybe-configure-stagefeedback-binutils:
maybe-all-stagefeedback-binutils:
+maybe-clean-stagefeedback-binutils:
@if binutils-bootstrap
maybe-configure-stagefeedback-binutils: configure-stagefeedback-binutils
$(MAKE) $(FLAGS_TO_PASS) \
$(POSTSTAGE1_FLAGS_TO_PASS) \
CFLAGS="$(BOOT_CFLAGS) -fprofile-use"
+
+maybe-clean-stagefeedback-binutils: clean-stagefeedback-binutils
+clean-stagefeedback-binutils:
+ @[ -f binutils/Makefile ] || [ -f stagefeedback-binutils/Makefile ] \
+ || exit 0 ; \
+ [ -f binutils/Makefile ] || $(MAKE) stagefeedback-start ; \
+ cd binutils && \
+ $(MAKE) $(FLAGS_TO_PASS) \
+ $(POSTSTAGE1_FLAGS_TO_PASS) \
+ CFLAGS="$(BOOT_CFLAGS) -fprofile-use" clean
@endif binutils-bootstrap
+
.PHONY: configure-stagefeedback-gas maybe-configure-stagefeedback-gas
.PHONY: all-stagefeedback-gas maybe-all-stagefeedback-gas
+.PHONY: clean-stagefeedback-gas maybe-clean-stagefeedback-gas
maybe-configure-stagefeedback-gas:
maybe-all-stagefeedback-gas:
+maybe-clean-stagefeedback-gas:
@if gas-bootstrap
maybe-configure-stagefeedback-gas: configure-stagefeedback-gas
$(MAKE) $(FLAGS_TO_PASS) \
$(POSTSTAGE1_FLAGS_TO_PASS) \
CFLAGS="$(BOOT_CFLAGS) -fprofile-use"
+
+maybe-clean-stagefeedback-gas: clean-stagefeedback-gas
+clean-stagefeedback-gas:
+ @[ -f gas/Makefile ] || [ -f stagefeedback-gas/Makefile ] \
+ || exit 0 ; \
+ [ -f gas/Makefile ] || $(MAKE) stagefeedback-start ; \
+ cd gas && \
+ $(MAKE) $(FLAGS_TO_PASS) \
+ $(POSTSTAGE1_FLAGS_TO_PASS) \
+ CFLAGS="$(BOOT_CFLAGS) -fprofile-use" clean
@endif gas-bootstrap
+
.PHONY: configure-stagefeedback-gcc maybe-configure-stagefeedback-gcc
.PHONY: all-stagefeedback-gcc maybe-all-stagefeedback-gcc
+.PHONY: clean-stagefeedback-gcc maybe-clean-stagefeedback-gcc
maybe-configure-stagefeedback-gcc:
maybe-all-stagefeedback-gcc:
+maybe-clean-stagefeedback-gcc:
@if gcc-bootstrap
maybe-configure-stagefeedback-gcc: configure-stagefeedback-gcc
$(MAKE) $(FLAGS_TO_PASS) \
$(POSTSTAGE1_FLAGS_TO_PASS) \
CFLAGS="$(BOOT_CFLAGS) -fprofile-use" $(EXTRA_GCC_FLAGS)
+
+maybe-clean-stagefeedback-gcc: clean-stagefeedback-gcc
+clean-stagefeedback-gcc:
+ @[ -f gcc/Makefile ] || [ -f stagefeedback-gcc/Makefile ] \
+ || exit 0 ; \
+ [ -f gcc/Makefile ] || $(MAKE) stagefeedback-start ; \
+ cd gcc && \
+ $(MAKE) $(FLAGS_TO_PASS) \
+ $(POSTSTAGE1_FLAGS_TO_PASS) \
+ CFLAGS="$(BOOT_CFLAGS) -fprofile-use" $(EXTRA_GCC_FLAGS) clean
@endif gcc-bootstrap
+
.PHONY: configure-stagefeedback-intl maybe-configure-stagefeedback-intl
.PHONY: all-stagefeedback-intl maybe-all-stagefeedback-intl
+.PHONY: clean-stagefeedback-intl maybe-clean-stagefeedback-intl
maybe-configure-stagefeedback-intl:
maybe-all-stagefeedback-intl:
+maybe-clean-stagefeedback-intl:
@if intl-bootstrap
maybe-configure-stagefeedback-intl: configure-stagefeedback-intl
$(MAKE) $(FLAGS_TO_PASS) \
$(POSTSTAGE1_FLAGS_TO_PASS) \
CFLAGS="$(BOOT_CFLAGS) -fprofile-use"
+
+maybe-clean-stagefeedback-intl: clean-stagefeedback-intl
+clean-stagefeedback-intl:
+ @[ -f intl/Makefile ] || [ -f stagefeedback-intl/Makefile ] \
+ || exit 0 ; \
+ [ -f intl/Makefile ] || $(MAKE) stagefeedback-start ; \
+ cd intl && \
+ $(MAKE) $(FLAGS_TO_PASS) \
+ $(POSTSTAGE1_FLAGS_TO_PASS) \
+ CFLAGS="$(BOOT_CFLAGS) -fprofile-use" clean
@endif intl-bootstrap
+
.PHONY: configure-stagefeedback-ld maybe-configure-stagefeedback-ld
.PHONY: all-stagefeedback-ld maybe-all-stagefeedback-ld
+.PHONY: clean-stagefeedback-ld maybe-clean-stagefeedback-ld
maybe-configure-stagefeedback-ld:
maybe-all-stagefeedback-ld:
+maybe-clean-stagefeedback-ld:
@if ld-bootstrap
maybe-configure-stagefeedback-ld: configure-stagefeedback-ld
$(MAKE) $(FLAGS_TO_PASS) \
$(POSTSTAGE1_FLAGS_TO_PASS) \
CFLAGS="$(BOOT_CFLAGS) -fprofile-use"
+
+maybe-clean-stagefeedback-ld: clean-stagefeedback-ld
+clean-stagefeedback-ld:
+ @[ -f ld/Makefile ] || [ -f stagefeedback-ld/Makefile ] \
+ || exit 0 ; \
+ [ -f ld/Makefile ] || $(MAKE) stagefeedback-start ; \
+ cd ld && \
+ $(MAKE) $(FLAGS_TO_PASS) \
+ $(POSTSTAGE1_FLAGS_TO_PASS) \
+ CFLAGS="$(BOOT_CFLAGS) -fprofile-use" clean
@endif ld-bootstrap
+
.PHONY: configure-stagefeedback-libcpp maybe-configure-stagefeedback-libcpp
.PHONY: all-stagefeedback-libcpp maybe-all-stagefeedback-libcpp
+.PHONY: clean-stagefeedback-libcpp maybe-clean-stagefeedback-libcpp
maybe-configure-stagefeedback-libcpp:
maybe-all-stagefeedback-libcpp:
+maybe-clean-stagefeedback-libcpp:
@if libcpp-bootstrap
maybe-configure-stagefeedback-libcpp: configure-stagefeedback-libcpp
$(MAKE) $(FLAGS_TO_PASS) \
$(POSTSTAGE1_FLAGS_TO_PASS) \
CFLAGS="$(BOOT_CFLAGS) -fprofile-use"
+
+maybe-clean-stagefeedback-libcpp: clean-stagefeedback-libcpp
+clean-stagefeedback-libcpp:
+ @[ -f libcpp/Makefile ] || [ -f stagefeedback-libcpp/Makefile ] \
+ || exit 0 ; \
+ [ -f libcpp/Makefile ] || $(MAKE) stagefeedback-start ; \
+ cd libcpp && \
+ $(MAKE) $(FLAGS_TO_PASS) \
+ $(POSTSTAGE1_FLAGS_TO_PASS) \
+ CFLAGS="$(BOOT_CFLAGS) -fprofile-use" clean
@endif libcpp-bootstrap
+
.PHONY: configure-stagefeedback-libbanshee maybe-configure-stagefeedback-libbanshee
.PHONY: all-stagefeedback-libbanshee maybe-all-stagefeedback-libbanshee
+.PHONY: clean-stagefeedback-libbanshee maybe-clean-stagefeedback-libbanshee
maybe-configure-stagefeedback-libbanshee:
maybe-all-stagefeedback-libbanshee:
+maybe-clean-stagefeedback-libbanshee:
@if libbanshee-bootstrap
maybe-configure-stagefeedback-libbanshee: configure-stagefeedback-libbanshee
$(MAKE) $(FLAGS_TO_PASS) \
$(POSTSTAGE1_FLAGS_TO_PASS) \
CFLAGS="$(BOOT_CFLAGS) -fprofile-use"
+
+maybe-clean-stagefeedback-libbanshee: clean-stagefeedback-libbanshee
+clean-stagefeedback-libbanshee:
+ @[ -f libbanshee/Makefile ] || [ -f stagefeedback-libbanshee/Makefile ] \
+ || exit 0 ; \
+ [ -f libbanshee/Makefile ] || $(MAKE) stagefeedback-start ; \
+ cd libbanshee && \
+ $(MAKE) $(FLAGS_TO_PASS) \
+ $(POSTSTAGE1_FLAGS_TO_PASS) \
+ CFLAGS="$(BOOT_CFLAGS) -fprofile-use" clean
@endif libbanshee-bootstrap
+
.PHONY: configure-stagefeedback-libiberty maybe-configure-stagefeedback-libiberty
.PHONY: all-stagefeedback-libiberty maybe-all-stagefeedback-libiberty
+.PHONY: clean-stagefeedback-libiberty maybe-clean-stagefeedback-libiberty
maybe-configure-stagefeedback-libiberty:
maybe-all-stagefeedback-libiberty:
+maybe-clean-stagefeedback-libiberty:
@if libiberty-bootstrap
maybe-configure-stagefeedback-libiberty: configure-stagefeedback-libiberty
$(MAKE) $(FLAGS_TO_PASS) \
$(POSTSTAGE1_FLAGS_TO_PASS) \
CFLAGS="$(BOOT_CFLAGS) -fprofile-use"
+
+maybe-clean-stagefeedback-libiberty: clean-stagefeedback-libiberty
+clean-stagefeedback-libiberty:
+ @[ -f libiberty/Makefile ] || [ -f stagefeedback-libiberty/Makefile ] \
+ || exit 0 ; \
+ [ -f libiberty/Makefile ] || $(MAKE) stagefeedback-start ; \
+ cd libiberty && \
+ $(MAKE) $(FLAGS_TO_PASS) \
+ $(POSTSTAGE1_FLAGS_TO_PASS) \
+ CFLAGS="$(BOOT_CFLAGS) -fprofile-use" clean
@endif libiberty-bootstrap
+
.PHONY: configure-stagefeedback-zlib maybe-configure-stagefeedback-zlib
.PHONY: all-stagefeedback-zlib maybe-all-stagefeedback-zlib
+.PHONY: clean-stagefeedback-zlib maybe-clean-stagefeedback-zlib
maybe-configure-stagefeedback-zlib:
maybe-all-stagefeedback-zlib:
+maybe-clean-stagefeedback-zlib:
@if zlib-bootstrap
maybe-configure-stagefeedback-zlib: configure-stagefeedback-zlib
$(MAKE) $(FLAGS_TO_PASS) \
$(POSTSTAGE1_FLAGS_TO_PASS) \
CFLAGS="$(BOOT_CFLAGS) -fprofile-use"
+
+maybe-clean-stagefeedback-zlib: clean-stagefeedback-zlib
+clean-stagefeedback-zlib:
+ @[ -f zlib/Makefile ] || [ -f stagefeedback-zlib/Makefile ] \
+ || exit 0 ; \
+ [ -f zlib/Makefile ] || $(MAKE) stagefeedback-start ; \
+ cd zlib && \
+ $(MAKE) $(FLAGS_TO_PASS) \
+ $(POSTSTAGE1_FLAGS_TO_PASS) \
+ CFLAGS="$(BOOT_CFLAGS) -fprofile-use" clean
@endif zlib-bootstrap
+
# FIXME: Will not need to be conditional when toplevel bootstrap is the
# only possibility, but now it conflicts with no-bootstrap rules
@if gcc-bootstrap
-.PHONY: distclean-stagefeedback
-
-# Rules to wipe a stage and all the following ones, used for cleanstrap
+# Rules to wipe a stage and all the following ones, also used for cleanstrap
distclean-stage1:: distclean-stagefeedback
+.PHONY: distclean-stagefeedback
distclean-stagefeedback::
[ -f stage_current ] && $(MAKE) `cat stage_current`-end || :
rm -rf stagefeedback-*
$(MAKE) stagefeedback-bubble stagefeedback-end
@endif gcc-bootstrap
+@if gcc-bootstrap
+NOTPARALLEL = .NOTPARALLEL
+$(NOTPARALLEL):
+do-distclean: distclean-stage1
+@endif gcc-bootstrap
+
# --------------------------------------
# Dependencies between different modules
# --------------------------------------
tentative_cc="/usr/cygnus/progressive/bin/gcc"
host_makefile_frag="config/mh-lynxrs6k"
;;
+ powerpc-*-darwin*)
+ host_makefile_frag="config/mh-ppc-darwin"
+ ;;
*-*-lynxos*)
# /bin/cc is less than useful for our purposes. Always use GCC
tentative_cc="/bin/gcc"
# Extract the first word of "gcc", so it can be a program name with args.
set dummy gcc; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:1789: checking for $ac_word" >&5
+echo "configure:1792: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_CC'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
# Extract the first word of "cc", so it can be a program name with args.
set dummy cc; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:1819: checking for $ac_word" >&5
+echo "configure:1822: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_CC'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
# Extract the first word of "cl", so it can be a program name with args.
set dummy cl; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:1870: checking for $ac_word" >&5
+echo "configure:1873: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_CC'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
fi
echo $ac_n "checking whether the C compiler ($CC $CFLAGS $LDFLAGS) works""... $ac_c" 1>&6
-echo "configure:1902: checking whether the C compiler ($CC $CFLAGS $LDFLAGS) works" >&5
+echo "configure:1905: checking whether the C compiler ($CC $CFLAGS $LDFLAGS) works" >&5
ac_ext=c
# CFLAGS is not in ac_cpp because -g, -O, etc. are not valid cpp options.
cat > conftest.$ac_ext << EOF
-#line 1913 "configure"
+#line 1916 "configure"
#include "confdefs.h"
main(){return(0);}
EOF
-if { (eval echo configure:1918: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:1921: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
ac_cv_prog_cc_works=yes
# If we can't run a trivial program, we are probably using a cross compiler.
if (./conftest; exit) 2>/dev/null; then
{ echo "configure: error: installation or configuration problem: C compiler cannot create executables." 1>&2; exit 1; }
fi
echo $ac_n "checking whether the C compiler ($CC $CFLAGS $LDFLAGS) is a cross-compiler""... $ac_c" 1>&6
-echo "configure:1944: checking whether the C compiler ($CC $CFLAGS $LDFLAGS) is a cross-compiler" >&5
+echo "configure:1947: checking whether the C compiler ($CC $CFLAGS $LDFLAGS) is a cross-compiler" >&5
echo "$ac_t""$ac_cv_prog_cc_cross" 1>&6
cross_compiling=$ac_cv_prog_cc_cross
echo $ac_n "checking whether we are using GNU C""... $ac_c" 1>&6
-echo "configure:1949: checking whether we are using GNU C" >&5
+echo "configure:1952: checking whether we are using GNU C" >&5
if eval "test \"`echo '$''{'ac_cv_prog_gcc'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
yes;
#endif
EOF
-if { ac_try='${CC-cc} -E conftest.c'; { (eval echo configure:1958: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }; } | egrep yes >/dev/null 2>&1; then
+if { ac_try='${CC-cc} -E conftest.c'; { (eval echo configure:1961: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }; } | egrep yes >/dev/null 2>&1; then
ac_cv_prog_gcc=yes
else
ac_cv_prog_gcc=no
ac_save_CFLAGS="$CFLAGS"
CFLAGS=
echo $ac_n "checking whether ${CC-cc} accepts -g""... $ac_c" 1>&6
-echo "configure:1977: checking whether ${CC-cc} accepts -g" >&5
+echo "configure:1980: checking whether ${CC-cc} accepts -g" >&5
if eval "test \"`echo '$''{'ac_cv_prog_cc_g'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
# Extract the first word of "${ac_tool_prefix}gnatbind", so it can be a program name with args.
set dummy ${ac_tool_prefix}gnatbind; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:2044: checking for $ac_word" >&5
+echo "configure:2047: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_GNATBIND'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
# Extract the first word of "gnatbind", so it can be a program name with args.
set dummy gnatbind; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:2076: checking for $ac_word" >&5
+echo "configure:2079: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_GNATBIND'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
fi
echo $ac_n "checking whether compiler driver understands Ada""... $ac_c" 1>&6
-echo "configure:2109: checking whether compiler driver understands Ada" >&5
+echo "configure:2112: checking whether compiler driver understands Ada" >&5
if eval "test \"`echo '$''{'acx_cv_cc_gcc_supports_ada'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
fi
echo $ac_n "checking how to compare bootstrapped objects""... $ac_c" 1>&6
-echo "configure:2142: checking how to compare bootstrapped objects" >&5
+echo "configure:2145: checking how to compare bootstrapped objects" >&5
if eval "test \"`echo '$''{'gcc_cv_prog_cmp_skip'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
CFLAGS="$CFLAGS $gmpinc"
# Check GMP actually works
echo $ac_n "checking for correct version of gmp.h""... $ac_c" 1>&6
-echo "configure:2240: checking for correct version of gmp.h" >&5
+echo "configure:2243: checking for correct version of gmp.h" >&5
cat > conftest.$ac_ext <<EOF
-#line 2242 "configure"
+#line 2245 "configure"
#include "confdefs.h"
#include "gmp.h"
int main() {
; return 0; }
EOF
-if { (eval echo configure:2253: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+if { (eval echo configure:2256: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
rm -rf conftest*
echo "$ac_t""yes" 1>&6
else
if test x"$have_gmp" = xyes; then
echo $ac_n "checking for MPFR""... $ac_c" 1>&6
-echo "configure:2266: checking for MPFR" >&5
+echo "configure:2269: checking for MPFR" >&5
saved_LIBS="$LIBS"
LIBS="$LIBS $gmplibs"
cat > conftest.$ac_ext <<EOF
-#line 2271 "configure"
+#line 2274 "configure"
#include "confdefs.h"
#include <gmp.h>
#include <mpfr.h>
mpfr_t n; mpfr_init(n);
; return 0; }
EOF
-if { (eval echo configure:2279: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:2282: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
echo "$ac_t""yes" 1>&6
else
# Extract the first word of "$ac_prog", so it can be a program name with args.
set dummy $ac_prog; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:2763: checking for $ac_word" >&5
+echo "configure:2766: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_CONFIGURED_BISON'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
# Extract the first word of "$ac_prog", so it can be a program name with args.
set dummy $ac_prog; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:2798: checking for $ac_word" >&5
+echo "configure:2801: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_CONFIGURED_YACC'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
# Extract the first word of "$ac_prog", so it can be a program name with args.
set dummy $ac_prog; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:2833: checking for $ac_word" >&5
+echo "configure:2836: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_CONFIGURED_M4'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
# Extract the first word of "$ac_prog", so it can be a program name with args.
set dummy $ac_prog; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:2868: checking for $ac_word" >&5
+echo "configure:2871: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_CONFIGURED_FLEX'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
# Extract the first word of "$ac_prog", so it can be a program name with args.
set dummy $ac_prog; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:2903: checking for $ac_word" >&5
+echo "configure:2906: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_CONFIGURED_LEX'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
# Extract the first word of "$ac_prog", so it can be a program name with args.
set dummy $ac_prog; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:2938: checking for $ac_word" >&5
+echo "configure:2941: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_CONFIGURED_MAKEINFO'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
# Extract the first word of "${ncn_tool_prefix}ar", so it can be a program name with args.
set dummy ${ncn_tool_prefix}ar; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:3572: checking for $ac_word" >&5
+echo "configure:3575: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_AR'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
# Extract the first word of "ar", so it can be a program name with args.
set dummy ar; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:3605: checking for $ac_word" >&5
+echo "configure:3608: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_ncn_cv_AR'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
# Extract the first word of "${ncn_tool_prefix}as", so it can be a program name with args.
set dummy ${ncn_tool_prefix}as; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:3644: checking for $ac_word" >&5
+echo "configure:3647: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_AS'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
# Extract the first word of "as", so it can be a program name with args.
set dummy as; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:3677: checking for $ac_word" >&5
+echo "configure:3680: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_ncn_cv_AS'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
# Extract the first word of "${ncn_tool_prefix}dlltool", so it can be a program name with args.
set dummy ${ncn_tool_prefix}dlltool; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:3716: checking for $ac_word" >&5
+echo "configure:3719: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_DLLTOOL'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
# Extract the first word of "dlltool", so it can be a program name with args.
set dummy dlltool; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:3749: checking for $ac_word" >&5
+echo "configure:3752: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_ncn_cv_DLLTOOL'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
# Extract the first word of "${ncn_tool_prefix}ld", so it can be a program name with args.
set dummy ${ncn_tool_prefix}ld; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:3788: checking for $ac_word" >&5
+echo "configure:3791: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_LD'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
# Extract the first word of "ld", so it can be a program name with args.
set dummy ld; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:3821: checking for $ac_word" >&5
+echo "configure:3824: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_ncn_cv_LD'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
# Extract the first word of "${ncn_tool_prefix}nm", so it can be a program name with args.
set dummy ${ncn_tool_prefix}nm; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:3860: checking for $ac_word" >&5
+echo "configure:3863: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_NM'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
# Extract the first word of "nm", so it can be a program name with args.
set dummy nm; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:3893: checking for $ac_word" >&5
+echo "configure:3896: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_ncn_cv_NM'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
# Extract the first word of "${ncn_tool_prefix}ranlib", so it can be a program name with args.
set dummy ${ncn_tool_prefix}ranlib; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:3932: checking for $ac_word" >&5
+echo "configure:3935: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_RANLIB'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
# Extract the first word of "ranlib", so it can be a program name with args.
set dummy ranlib; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:3965: checking for $ac_word" >&5
+echo "configure:3968: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_ncn_cv_RANLIB'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
# Extract the first word of "${ncn_tool_prefix}windres", so it can be a program name with args.
set dummy ${ncn_tool_prefix}windres; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:4004: checking for $ac_word" >&5
+echo "configure:4007: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_WINDRES'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
# Extract the first word of "windres", so it can be a program name with args.
set dummy windres; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:4037: checking for $ac_word" >&5
+echo "configure:4040: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_ncn_cv_WINDRES'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
# Extract the first word of "${ncn_tool_prefix}objcopy", so it can be a program name with args.
set dummy ${ncn_tool_prefix}objcopy; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:4076: checking for $ac_word" >&5
+echo "configure:4079: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_OBJCOPY'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
# Extract the first word of "objcopy", so it can be a program name with args.
set dummy objcopy; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:4109: checking for $ac_word" >&5
+echo "configure:4112: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_ncn_cv_OBJCOPY'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
# Extract the first word of "${ncn_tool_prefix}objdump", so it can be a program name with args.
set dummy ${ncn_tool_prefix}objdump; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:4148: checking for $ac_word" >&5
+echo "configure:4151: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_OBJDUMP'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
# Extract the first word of "objdump", so it can be a program name with args.
set dummy objdump; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:4181: checking for $ac_word" >&5
+echo "configure:4184: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_ncn_cv_OBJDUMP'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
# Extract the first word of "${ncn_target_tool_prefix}ar", so it can be a program name with args.
set dummy ${ncn_target_tool_prefix}ar; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:4227: checking for $ac_word" >&5
+echo "configure:4230: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_CONFIGURED_AR_FOR_TARGET'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
# Extract the first word of "ar", so it can be a program name with args.
set dummy ar; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:4260: checking for $ac_word" >&5
+echo "configure:4263: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_ncn_cv_CONFIGURED_AR_FOR_TARGET'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
# Extract the first word of "${ncn_target_tool_prefix}as", so it can be a program name with args.
set dummy ${ncn_target_tool_prefix}as; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:4299: checking for $ac_word" >&5
+echo "configure:4302: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_CONFIGURED_AS_FOR_TARGET'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
# Extract the first word of "as", so it can be a program name with args.
set dummy as; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:4332: checking for $ac_word" >&5
+echo "configure:4335: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_ncn_cv_CONFIGURED_AS_FOR_TARGET'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
# Extract the first word of "${ncn_target_tool_prefix}dlltool", so it can be a program name with args.
set dummy ${ncn_target_tool_prefix}dlltool; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:4371: checking for $ac_word" >&5
+echo "configure:4374: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_CONFIGURED_DLLTOOL_FOR_TARGET'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
# Extract the first word of "dlltool", so it can be a program name with args.
set dummy dlltool; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:4404: checking for $ac_word" >&5
+echo "configure:4407: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_ncn_cv_CONFIGURED_DLLTOOL_FOR_TARGET'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
# Extract the first word of "${ncn_target_tool_prefix}ld", so it can be a program name with args.
set dummy ${ncn_target_tool_prefix}ld; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:4443: checking for $ac_word" >&5
+echo "configure:4446: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_CONFIGURED_LD_FOR_TARGET'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
# Extract the first word of "ld", so it can be a program name with args.
set dummy ld; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:4476: checking for $ac_word" >&5
+echo "configure:4479: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_ncn_cv_CONFIGURED_LD_FOR_TARGET'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
# Extract the first word of "${ncn_target_tool_prefix}nm", so it can be a program name with args.
set dummy ${ncn_target_tool_prefix}nm; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:4515: checking for $ac_word" >&5
+echo "configure:4518: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_CONFIGURED_NM_FOR_TARGET'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
# Extract the first word of "nm", so it can be a program name with args.
set dummy nm; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:4548: checking for $ac_word" >&5
+echo "configure:4551: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_ncn_cv_CONFIGURED_NM_FOR_TARGET'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
# Extract the first word of "${ncn_target_tool_prefix}ranlib", so it can be a program name with args.
set dummy ${ncn_target_tool_prefix}ranlib; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:4587: checking for $ac_word" >&5
+echo "configure:4590: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_CONFIGURED_RANLIB_FOR_TARGET'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
# Extract the first word of "ranlib", so it can be a program name with args.
set dummy ranlib; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:4620: checking for $ac_word" >&5
+echo "configure:4623: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_ncn_cv_CONFIGURED_RANLIB_FOR_TARGET'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
# Extract the first word of "${ncn_target_tool_prefix}windres", so it can be a program name with args.
set dummy ${ncn_target_tool_prefix}windres; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:4659: checking for $ac_word" >&5
+echo "configure:4662: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_CONFIGURED_WINDRES_FOR_TARGET'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
# Extract the first word of "windres", so it can be a program name with args.
set dummy windres; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:4692: checking for $ac_word" >&5
+echo "configure:4695: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_ncn_cv_CONFIGURED_WINDRES_FOR_TARGET'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
NM_FOR_TARGET=${NM_FOR_TARGET}${extra_nmflags_for_target}
echo $ac_n "checking whether to enable maintainer-specific portions of Makefiles""... $ac_c" 1>&6
-echo "configure:4777: checking whether to enable maintainer-specific portions of Makefiles" >&5
+echo "configure:4780: checking whether to enable maintainer-specific portions of Makefiles" >&5
# Check whether --enable-maintainer-mode or --disable-maintainer-mode was given.
if test "${enable_maintainer_mode+set}" = set; then
enableval="$enable_maintainer_mode"
# gcc for stageN-gcc and stagePREV-gcc for stage(N-1). In case this is not
# possible, however, we can resort to mv.
echo $ac_n "checking if symbolic links between directories work""... $ac_c" 1>&6
-echo "configure:4824: checking if symbolic links between directories work" >&5
+echo "configure:4827: checking if symbolic links between directories work" >&5
if eval "test \"`echo '$''{'gcc_cv_prog_ln_s_dir'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
projects / binutils-gdb.git / commitdiff