+1999-08-30 Stan Shebs <shebs@andros.cygnus.com>
+
+ * infrun.c (prepare_to_wait): New function, broken out from the
+ wfi_continue label in handle_inferior_event.
+ (handle_inferior_event): Change more gotos into function calls.
+
+1999-08-30 Michael Snyder <msnyder@cleaver.cygnus.com>
+
+ * tracepoint.c: -Wall warning cleanup.
+ (parse_and_eval_memrange): remove (unused).
+ (output_command, args_info, locals_info, registers_info): add decls.
+ (getpkt, putpkt, remote_console_output): add decls.
+ (isalnum, isspace): cast arg to avoid warning.
+ (printf, fprintf, sprintf): use [fs]printf_vma for printing addrs.
+
+Mon Aug 30 21:47:58 1999 Andrew Cagney <cagney@b1.cygnus.com>
+
+ * d10v-tdep.c: #include "language.h".
+
+Mon Aug 30 20:38:57 1999 Andrew Cagney <cagney@b1.cygnus.com>
+
+ * configure.in (AC_CHECK_HEADERS): Check for <time.h>.
+ * configure, acconfig.in: Re-generate.
+
+ * remote-rdp.c: #include <time.h>
+
+ * config/arm/tm-arm.h (arm_float_info): Add declaration.
+
+ * arm-tdep.c (convert_from_extended, convert_to_extended): Change
+ double ptr arg to void ptr arg.
+
+ * config/arm/tm-arm.h (arm_frameless_function_invocation): Add
+ declaration.
+ (arm_frame_find_saved_regs): Rename frame_find_saved_regs.
+ (convert_from_extended, convert_to_extended): Add declaration.
+
+Mon Aug 30 19:05:32 1999 Andrew Cagney <cagney@b1.cygnus.com>
+
+ * configure.in (WERR_CFLAGS): Separate the -Werror flag.
+ * configure: Re-generate.
+
+ * Makefile.in (INTERNAL_CFLAGS): Re-define using
+ INTERNAL_WARN_CFLAGS.
+ (INTERNAL_WARN_CFLAGS): Define. Leave off WERR_CFLAGS.
+ (tracepoint.o): Add explicit rule.
+ (WERR_CFLAGS): Add definition.
+
+Mon Aug 30 17:52:17 1999 Andrew Cagney <cagney@b1.cygnus.com>
+
+ * utils.c: #include "event-loop.h" for declaration of
+ async_request_quit.
+ * Makefile.in (utils.o): Add dependency on event-loop.h.
+
+ * event-top.c (mark_async_signal_handler_wrapper,
+ async_request_quit): Move declaration from here.
+ * event-loop.h: To here.
+
+ * defs.h: Add declaration of exec.c:exec_set_section_offsets.
+
+ * event-top.c: #include "gdbcmd.h" which includes "command.h" and
+ hence expose declaration of function dont_repeat.
+
+ * top.c (ISATTY), tracepoint.c (ISATTY), utils.c (ISATTY),
+ event-top.c (ISATTY): Move definitions from here.
+ * defs.h (ISATTY): To here. #include <unistd.h>.
+
+ * sol-thread.c, solib.c, source.c, sparcl-tdep.c, tracepoint.c,
+ utils.c, win32-nat.c, wince.c, top.c, symfile.c, ser-unix.c,
+ ser-tcp.c, procfs.c, maint.c, infttrace.c, hppa-tdep.c,
+ ser-pipe.c, remote-rdp.c, main.c, inftarg.c, inflow.c,
+ hpux-thread.c, hp-psymtab-read.c, go32-nat.c, fork-child.c,
+ corelow.c, command.c: Do not #include <unistd.h>, moved to defs.h.
+
+Mon Aug 30 15:14:43 1999 Andrew Cagney <cagney@b1.cygnus.com>
+
+ * defs.h (struct tui_stream, enum streamtype): Move from here.
+ * utils.c: To here.
+
+ * main.c (tui_file_fputs): Move from here.
+ * utils.c: To here.
+
+Sun Aug 29 10:03:32 1999 Andrew Cagney <cagney@b1.cygnus.com>
+
+ * gdb-events.h, gdb-events.c, gdb-events.sh: New files.
+
+1999-08-27 Michael Snyder <msnyder@cleaver.cygnus.com>
+
+ * solib.c (open_symbol_file_object): new function.
+ Called when attaching to a new process, if there is no loaded
+ symbol file. Attempts to locate the executable file for the
+ attached process and load symbols from it.
+ (solib_add): Call open_symbol_file_object if attaching to a
+ new process and no open symbol file.
+
+1999-08-27 Jason Molenda (jsm@bugshack.cygnus.com)
+
+ * config/i386/tm-sun386.h (GDB_TARGET_IS_SUN386): Definition
+ removed--no longer checked anywhere in gdb.
+
+1999-08-27 Stan Shebs <shebs@andros.cygnus.com>
+
+ * infrun.c (stop_stepping): New function, broken out from
+ stop_stepping label in handle_inferior_event.
+ (handle_inferior_event): Change gotos into function calls.
+
+Fri Aug 27 20:13:22 1999 Andrew Cagney <cagney@b1.cygnus.com>
+
+ * defs.h (LONGEST): Move definition to earlier in file - to just
+ after BFD.
+ (paddr_u, paddr_d): Declare.
+ * utils.c (decimal2str): New function.
+ (paddr_u, paddr_d): Define.
+
+ * remote.c (remote_cisco_section_offsets,
+ compare_sections_command): Fix XprintfX arguments. Use paddr...
+ (putpkt_binary): Fix XprintfX arguments.
+
+Tue Aug 24 21:30:36 1999 Andrew Cagney <cagney@b1.cygnus.com>
+
+ * arm-tdep.c (arm_init_extra_frame_info): Add braces. Recommended
+ by gcc -Wparentheses.
+
+1999-08-26 Stan Shebs <shebs@andros.cygnus.com>
+
+ * infrun.c (check_sigtramp2): New function, broken out from
+ check_sigtramp2 label in handle_inferior_event.
+ (handle_inferior_event): Change gotos into function calls.
+
+ Declare Tahoe configuration obsolete.
+ * configure.host, configure.tgt: Comment out Tahoe configs.
+ * Makefile.in: Comment out Tahoe-related action.
+ * tahoe-tdep.c, config/tahoe/*: Comment out.
+ * NEWS: Mention obsolete status.
+
+1999-08-26 J.T. Conklin <jtc@redback.com>
+
+ * i386-stub.c, m32r-stub.c, m68k-stub.c, sh-stub.c, sh-stub.c,
+ sparc-stub, sparcl-stub.c sparclet-stub.c (getpacket): If '$',
+ the packet start character is received in the 'middle' of a
+ packet, assume that packet end character has been lost and
+ start a new packet.
+
+ * i386-stub.c, m32r-stub.c, m68k-stub.c, sh-stub.c, sparc-stub.c,
+ sparcl-stub.c sparclet-stub.c (getpacket): Changed to return ptr
+ to first character of input buffer. Removed & 0x7f masks.
+ (handle_exception): Don't access remcomInBuffer directly.
+
+1999-08-25 Stan Shebs <shebs@andros.cygnus.com>
+
+ * breakpoint.c (disable_breakpoints_in_shlibs): Only disable
+ enabled breakpoints.
+
+Tue Aug 24 14:59:23 1999 Andrew Cagney <cagney@b1.cygnus.com>
+
+ * tracepoint.c, remote.c, pa64solib.h, value.h, somsolib.h,
+ solib.h, scm-lang.h, language.h, inferior.h, defs.h, coff-solib.h,
+ ch-lang.h, breakpoint.h, annotate.h: Remove #if __STDC__ wrapping
+ struct declarations.
+
+ * config/sparc/nm-sun4sol2.h, config/mn10300/tm-mn10300.h,
+ config/mn10200/tm-mn10200.h, config/i386/tm-i386.h,
+ config/i386/tm-i386v.h, config/i386/nm-i386sol2.h,
+ config/pa/nm-hppah.h, config/rs6000/nm-rs6000.h,
+ config/sparc/tm-sp64.h, config/v850/tm-v850.h,
+ config/tic80/tm-tic80.h, config/sparc/tm-sparc.h,
+ config/sh/tm-sh.h, config/rs6000/tm-rs6000.h, config/pa/tm-hppa.h,
+ config/mips/tm-mips.h, config/m68k/tm-m68k.h,
+ config/m32r/tm-m32r.h, config/i960/tm-mon960.h,
+ config/fr30/tm-fr30.h, config/h8300/tm-h8300.h,
+ config/arm/tm-arm.h, config/alpha/tm-alpha.h,
+ config/a29k/tm-a29k.h: Ditto.
+
+Wed Aug 25 10:45:33 1999 Andrew Cagney <cagney@b1.cygnus.com>
+
+ * Makefile.in (gdb$(EXEEXT)): Add dependency on TDEPLIBS.
+
+ * config/arm/arm.mt (TDEPLIBS): Define. Move libangsd.a to here.
+ (TDEPFILES): From here.
+
+1999-08-24 Elena Zannoni <ezannoni@kwikemart.cygnus.com>
+
+ * top.c (init_main): Add new set/show command exec-done-display,
+ default value is off.
+ * event-loop.h: Export exec_done_display_p.
+ * event-top.c: New variable exec_done_display_p.
+ * infrun.c (complete_execution): Print completion message if
+ corresponding flag is set.
+
+ * top.c (DEFAULT_PROMPT): Add space after "(gdb)" at end of prompt.
+
+ From: J.T. Conklin <jtc@redback.com>
+ * top.c (DEFAULT_PROMPT): Set to "(gdb)" if not already defined.
+ (init_main): Always use DEFAULT_PROMPT.
+
+Tue Aug 24 03:23:31 1999 Jeffrey A Law (law@cygnus.com)
+
+ * hppa-tdep.c: Remove useless "purecov: deadcode" comments.
+ (hppa_use_struct_convention): Update for PA64.
+ (hppa_frame_saved_pc): Properly extract the saved PC in a call
+ dummy frame.
+ (in_solib_call_trampoline): Return nonzero if we are in a function
+ called ".stub".
+ (prologue_inst_adjust_sp): Handle std,ma.
+ (skip_prologue_hard_way): Handle more PA2.0/PA64 insns.
+ (hppa_frame_find_saved_regs): Similarly. Handle indirect save of
+ %r3 into the stack.
+
+ * config/pa/tm-hppa64.h (CALL_DUMMY_BREAKPOINT_OFFSET_P): Define.
+ (CALL_DUMMY_BREAKPOINT_OFFSET): Define.
+
+Tue Aug 24 14:59:23 1999 Andrew Cagney <cagney@b1.cygnus.com>
+
+ * Makefile.in (gdb$(EXEEXT)): Add dependency on main.o that was
+ lost when libgdb.a was added.
+
+Tue Aug 24 14:26:34 1999 Andrew Cagney <cagney@b1.cygnus.com>
+
+ * gdbarch.c, gdbarch.h: Convert to pure ISO-C.
+
+ * gdbarch.sh: New file.
+ * gdbarch.c, gdbarch.h: Add note describing gdbarch.sh
+
+Mon Aug 23 19:36:17 1999 Andrew Cagney <cagney@b1.cygnus.com>
+
+ * Makefile.in (libgdb.a): New target.
+ (gdb$(EXEEXT)): Add dependency on libgdb.a.
+ (libgdb-files, LIBGDB_OBS, libgdb, LIBGDBDEPS, LIBGDBFILES): Delete.
+
Mon Aug 23 10:16:32 1999 Jeffrey A Law (law@cygnus.com)
+ * infttrate.c (child_pid_to_exec_file): Find the correct base
+ of the stack for PA64.
+
* pa64solib.c: Fix some minor whitespace problems.
(bfd_lookup_symbol): New function.
(pa64_solib_create_inferior_hook): Find the address __dld_break
* breakpoint.h (target_hw_bp_type): new enum.
* breakpoint.c (insert_breakpoints): use enum instead of consts.
(remove_breakpoint): use enum instead of consts.
+ (throughout): use "warning" instead of "fprintf(stderr, ..."
[Also clean up a bunch of excessively long lines.]
1999-08-19 J.T. Conklin <jtc@redback.com>
1999-08-08 James Ingham <jingham@leda.cygnus.com>
* remote.c (remote_insert_breakpoint): Fix typo in Z packet support.
- Also move Z packet support OUTSIDE of REMOTE_BREAKPOINT ifdef,
- since this is not set for all targets that support the Z packet.
+ Also move Z packet support OUTSIDE of REMOTE_BREAKPOINT ifdef,
+ since this is not set for all targets that support the Z packet.
Fri Aug 6 17:17:28 1999 Andrew Cagney <cagney@b1.cygnus.com>
(arm_othernames): Use the set_disassembly_flavor.
(_initialize_arm_tdep): Setup the disassembly flavor commands, and
initialize the flavor.
- (arm_frameless_function_invocation): Adjust for
+ (arm_frameless_function_invocation): Adjust for
frameless functions that have 1 or 2 instructions that mimic the
standard APCS form.
(arm_scan_prologue): Be more careful about scanning the function
1999-07-28 Elena Zannoni <ezannoni@kwikemart.cygnus.com>
- From Eli Zaretskii <eliz@is.elta.co.il>:
+ From Eli Zaretskii <eliz@is.elta.co.il>:
* top.c (gdb_init) [__MSDOS__]: Arrange for GDB to return to the
original directory before exiting.
(cd_command) [_WIN32 || __MSDOS__]: Canonicalize the new directory
1999-07-24 Fred Fish <fnf@cygnus.com>
- * symfile.c (default_symfile_offsets): Clear section_offsets
- before filling it in.
+ * symfile.c (default_symfile_offsets): Clear section_offsets
+ before filling it in.
1999-07-16 Keith Seitz <keiths@cygnus.com>
1999-07-12 Keith Seitz <keiths@cygnus.com>
- * rdi-share/unixcomm.c (Unix_ResetSerial): Remove CYGWIN32
+ * rdi-share/unixcomm.c (Unix_ResetSerial): Remove CYGWIN32
conditional. It's no longer needed.
- (SERPORT1, SERPORT2): Linux serial ports are "/dev/ttyX", not
- "/dev/cuaX" (X=0,1,2,3,...).
+ (SERPORT1, SERPORT2): Linux serial ports are "/dev/ttyX", not
+ "/dev/cuaX" (X=0,1,2,3,...).
Mon Jul 12 02:02:00 1999 Andrew Cagney <cagney@amy.cygnus.com>
(mcore_push_arguments): Fix compiler warning.
1999-06-09 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
-
+
* rs6000-tdep.c (skip_prologue): Don't mistake a branch for a
subroutine call.
READLINE_CFLAGS = -I$(READLINE_SRC)/..
WARN_CFLAGS = @WARN_CFLAGS@
+WERROR_CFLAGS = @WERROR_CFLAGS@
# Where is the INTL library? Typically in ../intl.
INTL_DIR = ../intl
CXXFLAGS = -g -O
# INTERNAL_CFLAGS is the aggregate of all other *CFLAGS macros.
-INTERNAL_CFLAGS = $(CFLAGS) $(GLOBAL_CFLAGS) $(PROFILE_CFLAGS) \
+INTERNAL_WARN_CFLAGS = \
+ $(CFLAGS) $(GLOBAL_CFLAGS) $(PROFILE_CFLAGS) \
$(GDB_CFLAGS) $(OPCODES_CFLAGS) $(READLINE_CFLAGS) \
$(BFD_CFLAGS) $(MMALLOC_CFLAGS) $(INCLUDE_CFLAGS) \
$(INTL_CFLAGS) $(TUI_CFLAGS) $(ENABLE_CFLAGS) $(WARN_CFLAGS)
+INTERNAL_CFLAGS = $(INTERNAL_WARN_CFLAGS) $(WERROR_CFLAGS)
# LDFLAGS is specifically reserved for setting from the command line
# when running make.
ADD_FILES = $(REGEX) $(XM_ADD_FILES) $(TM_ADD_FILES) $(NAT_ADD_FILES)
ADD_DEPS = $(REGEX1) $(XM_ADD_FILES) $(TM_ADD_FILES) $(NAT_ADD_FILES)
-VERSION = 19990823
+VERSION = 19990830
DIST=gdb
LINT=/usr/5bin/lint
gdbarch.o gdbtypes.o copying.o $(DEPFILES) \
mem-break.o target.o parse.o language.o $(YYOBJ) buildsym.o \
kod.o kod-cisco.o \
+ gdb-events.o \
exec.o bcache.o objfiles.o minsyms.o maint.o demangle.o \
dbxread.o coffread.o elfread.o \
dwarfread.o dwarf2read.o mipsread.o stabsread.o corefile.o \
c-valprint.o cp-valprint.o ch-valprint.o f-valprint.o m2-valprint.o \
nlmread.o serial.o mdebugread.o os9kread.o top.o utils.o
-OBS = $(COMMON_OBS) $(ANNOTATE_OBS) main.o
-
-LIBGDB_OBS =
+OBS = $(COMMON_OBS) $(ANNOTATE_OBS)
TSOBS = inflow.o
.PRECIOUS: init.c
# Removing the old gdb first works better if it is running, at least on SunOS.
-gdb$(EXEEXT): $(OBS) $(BUILD_TUI) $(TSOBS) $(ADD_DEPS) $(CDEPS) init.o
+gdb$(EXEEXT): main.o libgdb.a $(ADD_DEPS) $(CDEPS) $(TDEPLIBS)
rm -f gdb$(EXEEXT)
- $(HLDENV) $(CC_LD) $(INTERNAL_LDFLAGS) $(WIN32LDAPP) -o gdb$(EXEEXT) \
- init.o $(OBS) $(TSOBS) $(TUI_LIBRARY) $(ADD_FILES) $(CLIBS) $(LOADLIBES)
+ $(HLDENV) $(CC_LD) $(INTERNAL_LDFLAGS) $(WIN32LDAPP) -o gdb$(EXEEXT) main.o libgdb.a $(TDEPLIBS) $(TUI_LIBRARY) $(CLIBS) $(LOADLIBES)
nlm: force
rootme=`pwd`; export rootme; $(MAKE) $(TARGET_FLAGS_TO_PASS) DO=all DODIRS=nlm subdir_do
-libgdb: libgdb-files $(LIBGDB_OBS)
-
-# libproc is not listed here because all-libproc is a dependency of all-gui,
-# not all-gdb, and thus might be built after us.
-LIBGDBDEPS=$(COMMON_OBS) $(LIBGDB_OBS) $(TSOBS) $(ADD_DEPS) $(CDEPS) init.o
-# libproc needs to be before libiberty for alloca.
-LIBGDBFILES=$(COMMON_OBS) $(LIBGDB_OBS) $(TSOBS) ../libproc/libproc.a \
- $(ADD_DEPS) $(CDEPS) init.o
-
-libgdb-files: $(LIBGDBDEPS) Makefile.in
- -rm -f libgdb-files
- for i in $(LIBGDBFILES); do\
- echo $$i >> libgdb-files;\
- done
+# Create a library of the gdb object files and build GDB by linking
+# against that.
+#
+# init.o is very important. It pulls in the rest of GDB.
+LIBGDB_OBS= $(OBS) $(TSOBS) $(ADD_FILES) init.o
+libgdb.a: $(LIBGDB_OBS)
+ -rm -f libgdb.a
+ $(AR) q libgdb.a $(LIBGDB_OBS)
+ $(RANLIB) libgdb.a
saber_gdb: $(SFILES) $(DEPFILES) copying.c version.c
#setopt load_flags $(CFLAGS) $(BFD_CFLAGS) -DHOST_SYS=SUN4_SYS
@$(MAKE) $(FLAGS_TO_PASS) DO=clean "DODIRS=$(SUBDIRS)" subdir_do
rm -f *.o *.a $(ADD_FILES) *~ init.c-tmp
rm -f init.c version.c
- rm -f gdb$(EXEEXT) core make.log libgdb-files
+ rm -f gdb$(EXEEXT) core make.log
rm -f gdb[0-9]$(EXEEXT)
# This used to depend on c-exp.tab.c m2-exp.tab.c TAGS
objfiles.h symfile.h target.h
breakpoint.o: breakpoint.c $(defs_h) $(gdbcmd_h) $(gdbcore_h) \
- $(inferior_h) language.h target.h gdbthread.h gdb_string.h
+ $(inferior_h) language.h target.h gdbthread.h gdb_string.h \
+ gdb-events.h
buildsym.o: buildsym.c $(bfd_h) buildsym.h complaints.h $(defs_h) \
objfiles.h symfile.h $(symtab_h) gdb_string.h
event-loop.o: event-loop.c $(defs_h) $(top_h) $(event_loop_h)
event-top.o: event-top.c top.h $(readline_headers) \
- $(defs_h) $(inferior_h) $(event_loop_h) terminal.h
+ $(defs_h) $(inferior_h) $(event_loop_h) terminal.h $(gdbcmd_h)
exec.o: exec.c $(defs_h) $(gdbcmd_h) $(gdbcore_h) $(inferior_h) \
target.h language.h gdb_string.h
fork-child.o: fork-child.c $(wait_h) $(defs_h) $(gdbcore_h) \
$(inferior_h) target.h terminal.h gdbthread.h gdb_string.h
+# Due to several ``enum enabled'' declaration clashes it is difficult
+# to fix breakpoint.c's compiler warnings.
tracepoint.o: tracepoint.c $(defs_h) $(symtab_h) $(frame_h) $(tracepoint_h) \
$(gdbtypes_h) $(expression_h) $(gdbcmd_h) $(value_h) target.h \
language.h gdb_string.h $(readline_headers)
+ $(CC) -c $(INTERNAL_WARN_CFLAGS) $(NO_WERROR_CFLAGS) $<
gdbarch.o: gdbarch.c $(defs_h) $(bfd_h) $(gdbcmd_h)
gnu-regex.h symfile.h $(symtab_h) target.h $(value_h) \
gdb_string.h
-tahoe-tdep.o: tahoe-tdep.c $(OP_INCLUDE)/tahoe.h $(defs_h) \
- $(symtab_h)
+# OBSOLETE tahoe-tdep.o: tahoe-tdep.c $(OP_INCLUDE)/tahoe.h $(defs_h) \
+# OBSOLETE $(symtab_h)
tic80-tdep.o: tic80-tdep.c $(defs_h)
utils.o: utils.c $(bfd_h) $(defs_h) $(expression_h) $(gdbcmd_h) \
language.h signals.h target.h terminal.h $(readline_headers) \
- gdb_string.h
+ gdb_string.h $(event_loop_h)
valarith.o: valarith.c $(bfd_h) $(defs_h) $(expression_h) \
$(gdbtypes_h) language.h $(symtab_h) target.h $(value_h) \
language.h m2-lang.h parser-defs.h $(symtab_h) $(value_h) \
$(bfd_h) objfiles.h symfile.h
+gdb-events.o: gdb-events.c gdb-events.h $(defs_h) $(gdbcmd_h)
+
### end of the gdb Makefile.in.
*** Changes since GDB-4.18:
+* New features
+
+On SVR4 native platforms (such as Solaris), if you attach to a process
+without first loading a symbol file, GDB will now attempt to locate and
+load symbols from the running process's executable file.
+
* New targets
Motorola MCore mcore-*-*
Altos 3068 m68*-altos-*
Convex c1-*-*, c2-*-*
Pyramid pyramid-*-*
+Tahoe tahoe-*-*
* Remote targets can connect to a sub-program
extern void annotate_frames_invalid PARAMS ((void));
-#ifdef __STDC__
struct type;
-#endif
extern void annotate_field_begin PARAMS ((struct type *));
extern void annotate_field_name_end PARAMS ((void));
{
arm_scan_prologue (fi);
- if (!fi->next) /* this is the innermost frame? */
+ if (!fi->next)
+ /* this is the innermost frame? */
fi->frame = read_register (fi->framereg);
- else /* not the innermost frame */
+ else
+ /* not the innermost frame */
/* If we have an FP, the callee saved it. */
if (fi->framereg == FP_REGNUM || fi->framereg == THUMB_FP_REGNUM)
- if (fi->next->fsr.regs[fi->framereg] != 0)
- fi->frame = read_memory_integer (fi->next->fsr.regs[fi->framereg],
- 4);
- else if (fromleaf) /* If we were called by a frameless fn.
- then our frame is still in the frame pointer
- register on the board... */
- fi->frame = read_fp ();
+ {
+ if (fi->next->fsr.regs[fi->framereg] != 0)
+ fi->frame =
+ read_memory_integer (fi->next->fsr.regs[fi->framereg], 4);
+ else if (fromleaf)
+ /* If we were called by a frameless fn. then our frame
+ is still in the frame pointer register on the
+ board... */
+ fi->frame = read_fp ();
+ }
/* Calculate actual addresses of saved registers using offsets determined
by arm_scan_prologue. */
void
convert_from_extended (ptr, dbl)
void *ptr;
- double *dbl;
+ void *dbl;
{
- *dbl = *(double *) ptr;
+ *(double *) dbl = *(double *) ptr;
}
void
convert_to_extended (dbl, ptr)
void *ptr;
- double *dbl;
+ void *dbl;
{
- *(double *) ptr = *dbl;
+ *(double *) ptr = *(double *) dbl;
}
static int
#include "symfile.h"
#include "objfiles.h"
+#include "gdb-events.h"
+
/* Prototypes for local functions. */
static void
b->type = bp_shlib_event;
}
+/* Disable any breakpoints that are on code in shared libraries. Only
+ apply to enabled breakpoints, disabled ones can just stay disabled. */
+
void
disable_breakpoints_in_shlibs (silent)
int silent;
#if defined (PC_SOLIB)
if (((b->type == bp_breakpoint) ||
(b->type == bp_hardware_breakpoint)) &&
- (b->enable != shlib_disabled) &&
- (b->enable != call_disabled) &&
+ b->enable == enabled &&
!b->duplicate &&
PC_SOLIB (b->address))
{
delete_breakpoint_hook and so on. */
if (create_breakpoint_hook)
create_breakpoint_hook (b);
+ breakpoint_create_event (b->number);
switch (b->type)
{
if (delete_breakpoint_hook)
delete_breakpoint_hook (bpt);
+ breakpoint_delete_event (bpt->number);
if (bpt->inserted)
remove_breakpoint (bpt, mark_uninserted);
if (modify_breakpoint_hook)
modify_breakpoint_hook (bpt);
+ breakpoint_modify_event (bpt->number);
}
/* ARGSUSED */
}
if (modify_breakpoint_hook)
modify_breakpoint_hook (bpt);
+ breakpoint_modify_event (bpt->number);
}
void
#include "frame.h"
#include "value.h"
+#include "gdb-events.h"
+
/* This is the maximum number of bytes a breakpoint instruction can take.
Feel free to increase it. It's just used in a few places to size
arrays that should be independent of the target architecture. */
/* Prototypes for breakpoint-related functions. */
-#ifdef __STDC__ /* Forward declarations for prototypes */
+/* Forward declarations for prototypes */
struct frame_info;
-#endif
extern int breakpoint_here_p PARAMS ((CORE_ADDR));
Foundation, Inc., 59 Temple Place - Suite 330,
Boston, MA 02111-1307, USA. */
-#ifdef __STDC__ /* Forward decls for prototypes */
+/* Forward decls for prototypes */
struct value;
-#endif
extern int
chill_parse PARAMS ((void)); /* Defined in ch-exp.y */
Foundation, Inc., 59 Temple Place - Suite 330,
Boston, MA 02111-1307, USA. */
-#ifdef __STDC__ /* Forward decl's for prototypes */
+/* Forward decl's for prototypes */
struct target_ops;
-#endif
/* Called when we free all symtabs, to free the shared library information
as well. */
#include "value.h"
#include <ctype.h>
#include "gdb_string.h"
-#ifdef HAVE_UNISTD_H
-#include <unistd.h>
-#endif
#ifdef HAVE_WAIT_H
#include <wait.h>
/* Define if you have the <termios.h> header file. */
#undef HAVE_TERMIOS_H
+/* Define if you have the <time.h> header file. */
+#undef HAVE_TIME_H
+
/* Define if you have the <unistd.h> header file. */
#undef HAVE_UNISTD_H
/* Provide our own get_saved_register. HAVE_REGISTER_WINDOWS is insufficient
because registers get renumbered on the a29k without getting saved. */
-#ifdef __STDC__
-enum lval_type;
struct frame_info;
-#endif
void a29k_get_saved_register PARAMS ((char *raw_buffer, int *optimized, CORE_ADDR * addrp, struct frame_info * frame, int regnum, enum lval_type * lvalp));
#define GET_SAVED_REGISTER(raw_buffer, optimized, addrp, frame, regnum, lval) \
a29k_get_saved_register (raw_buffer, optimized, addrp, frame, regnum, lval)
#include "coff/sym.h" /* Needed for PDR below. */
#include "coff/symconst.h"
-#ifdef __STDC__
struct frame_info;
struct type;
struct value;
struct symbol;
-#endif
#if !defined (TARGET_BYTE_ORDER)
#define TARGET_BYTE_ORDER LITTLE_ENDIAN
# Target: Acorn RISC machine (ARM) with simulator
-TDEPFILES= arm-tdep.o remote-rdp.o remote-rdi.o rdi-share/libangsd.a
+TDEPFILES= arm-tdep.o remote-rdp.o remote-rdi.o
+TDEPLIBS= rdi-share/libangsd.a
TM_FILE= tm-arm.h
SIM_OBS = remote-sim.o
Foundation, Inc., 59 Temple Place - Suite 330,
Boston, MA 02111-1307, USA. */
-#ifdef __STDC__ /* Forward decls for prototypes */
+/* Forward decls for prototypes */
struct type;
struct value;
-#endif
#define TARGET_BYTE_ORDER_SELECTABLE
* floating point processor (if any)
* No need to define if there is nothing to do.
*/
+extern void arm_float_info (void);
+
#define FLOAT_INFO { arm_float_info (); }
/* Say how long (ordinary) registers are. This is a piece of bogosity
/* Convert data from raw format for register REGNUM in buffer FROM
to virtual format with type TYPE in buffer TO. */
+void convert_from_extended (void *ptr, /*double*/void *dbl);
+
#define REGISTER_CONVERT_TO_VIRTUAL(REGNUM,TYPE,FROM,TO) \
{ \
double val; \
/* Convert data from virtual format with type TYPE in buffer FROM
to raw format for register REGNUM in buffer TO. */
+extern void convert_to_extended (void *ptr, /*double*/void *dbl);
+
#define REGISTER_CONVERT_TO_RAW(TYPE,REGNUM,FROM,TO) \
{ \
double val = extract_floating ((FROM), TYPE_LENGTH (TYPE)); \
stmdb sp!, {}
sub sp, ip, #4. */
+extern int arm_frameless_function_invocation (struct frame_info *fi);
#define FRAMELESS_FUNCTION_INVOCATION(FI) \
(arm_frameless_function_invocation (FI))
struct frame_saved_regs;
struct frame_info;
-void frame_find_saved_regs PARAMS ((struct frame_info * fi,
- struct frame_saved_regs * fsr));
+void arm_frame_find_saved_regs (struct frame_info * fi,
+ struct frame_saved_regs * fsr);
#define FRAME_FIND_SAVED_REGS(frame_info, frame_saved_regs) \
arm_frame_find_saved_regs (frame_info, &(frame_saved_regs));
#define IMEM_START 0x00000000 /* was 0x10000000 */
#define STACK_START 0x20007ffe
-#ifdef __STDC__ /* Forward decls for prototypes */
+/* Forward decls for prototypes */
struct frame_info;
struct frame_saved_regs;
struct type;
struct value;
-#endif
/* Advance PC across any function entry prologue instructions
to reach some "real" code. */
Can return -1, meaning no way to tell. */
#define FRAME_NUM_ARGS(fi) (-1)
-#ifdef __STDC__ /* Forward decls for prototypes */
+/* Forward decls for prototypes */
struct frame_info;
struct frame_saved_regs;
struct type;
struct value;
-#endif
#define EXTRA_FRAME_INFO \
struct frame_saved_regs fsr; \
/* Contributed by Steve Chamberlain sac@cygnus.com */
-#ifdef __STDC__
struct frame_info;
struct frame_saved_regs;
struct value;
struct type;
-#endif
/* 1 if debugging H8/300H application */
extern int h8300hmode;
#ifdef HAVE_THREAD_DB_LIB
-#ifdef __STDC__
struct objfile;
-#endif
#define target_new_objfile(OBJFILE) sol_thread_new_objfile (OBJFILE)
#ifndef TM_I386_H
#define TM_I386_H 1
-#ifdef __STDC__ /* Forward decl's for prototypes */
+/* Forward decl's for prototypes */
struct frame_info;
struct frame_saved_regs;
struct type;
-#endif
#define TARGET_BYTE_ORDER LITTLE_ENDIAN
#undef FRAME_NUM_ARGS
#define FRAME_NUM_ARGS(fi) (-1)
-#ifdef __STDC__ /* Forward decl's for prototypes */
+/* Forward decl's for prototypes */
struct frame_info;
struct frame_saved_regs;
-#endif
extern int
i386_frame_num_args PARAMS ((struct frame_info *));
#ifndef sun386
#define sun386
#endif
-#define GDB_TARGET_IS_SUN386 1
#define SUNOS4
#define USE_MACHINE_REG_H
#include "i960/tm-i960.h"
/* forward declarations */
-#ifdef __STDC__
struct frame_info;
-#endif
/* redefined from tm-i960.h */
/* Number of machine registers */
#include "i960/tm-i960.h"
/* forward declarations */
-#ifdef __STDC__
struct frame_info;
-#endif
/* Override the standard gdb prompt when compiled for this target. */
/* mvs_check SAVED_PC_AFTER_CALL */
#define SAVED_PC_AFTER_CALL(fi) read_register (RP_REGNUM)
-#ifdef __STDC__
struct frame_info;
struct frame_saved_regs;
struct type;
struct value;
-#endif
/* Define other aspects of the stack frame.
We keep the offsets of all saved registers, 'cause we need 'em a lot!
the new frame is not set up until the new function executes
some instructions. */
-#ifdef __STDC__
struct frame_info;
struct frame_saved_regs;
-#endif
extern CORE_ADDR m68k_saved_pc_after_call PARAMS ((struct frame_info *));
extern void m68k_find_saved_regs PARAMS ((struct frame_info *, struct frame_saved_regs *));
#ifndef TM_MIPS_H
#define TM_MIPS_H 1
-#ifdef __STDC__
struct frame_info;
struct symbol;
struct type;
struct value;
-#endif
#include <bfd.h>
#include "coff/sym.h" /* Needed for PDR below. */
#define SAVED_PC_AFTER_CALL(frame) \
(read_memory_integer (read_register (SP_REGNUM), REGISTER_SIZE) & 0xffffff)
-#ifdef __STDC__
struct frame_info;
struct frame_saved_regs;
struct type;
struct value;
-#endif
#define EXTRA_FRAME_INFO struct frame_saved_regs fsr; int status; int stack_size;
#define SAVED_PC_AFTER_CALL(frame) \
mn10300_saved_pc_after_call (frame)
-#ifdef __STDC__
struct frame_info;
struct type;
struct value;
-#endif
extern void mn10300_init_extra_frame_info PARAMS ((struct frame_info *));
#define INIT_EXTRA_FRAME_INFO(fromleaf, fi) mn10300_init_extra_frame_info (fi)
#ifdef HAVE_HPUX_THREAD_SUPPORT
-#ifdef __STDC__
struct objfile;
-#endif
void hpux_thread_new_objfile PARAMS ((struct objfile * objfile));
#define target_new_objfile(OBJFILE) hpux_thread_new_objfile (OBJFILE)
/* Forward declarations of some types we use in prototypes */
-#ifdef __STDC__
struct frame_info;
struct frame_saved_regs;
struct value;
struct type;
struct inferior_status;
-#endif
/* Target system byte order. */
0xe820f0000fb110d3LL, 0x0001000400151820LL,\
0xe6c0000008000240LL}
+#define CALL_DUMMY_BREAKPOINT_OFFSET_P 1
+#define CALL_DUMMY_BREAKPOINT_OFFSET 22 * 4
+
/* CALL_DUMMY_LENGTH is computed based on the size of a word on the target
machine, not the size of an instruction. Since a word on this target
holds two instructions we have to divide the instruction size by two to
xcoff_relocate_core (c);
extern void xcoff_relocate_symtab PARAMS ((unsigned int));
-#ifdef __STDC__
struct target_ops;
-#endif
extern void xcoff_relocate_core PARAMS ((struct target_ops *));
/* Return sizeof user struct to callers in less machine dependent routines */
Foundation, Inc., 59 Temple Place - Suite 330,
Boston, MA 02111-1307, USA. */
-#ifdef __STDC__ /* Forward decls for prototypes */
+/* Forward decls for prototypes */
struct frame_info;
struct type;
struct value;
-#endif
/* Minimum possible text address in AIX */
for a given object file.
It is used under native AIX configurations for determining the
TOC address when calling functions in the inferior. */
-#ifdef __STDC__
- struct objfile;
-#endif
- extern CORE_ADDR get_toc_offset PARAMS ((struct objfile *));
+
+struct objfile;
+extern CORE_ADDR get_toc_offset PARAMS ((struct objfile *));
/* Usually a function pointer's representation is simply the address
of the function. On the RS/6000 however, a function pointer is
/* Contributed by Steve Chamberlain sac@cygnus.com */
-#ifdef __STDC__
struct frame_info;
struct frame_saved_regs;
struct value;
struct type;
-#endif
#define GDB_TARGET_IS_SH
#ifdef HAVE_THREAD_DB_LIB
-#ifdef __STDC__
struct objfile;
-#endif
#define target_new_objfile(OBJFILE) sol_thread_new_objfile (OBJFILE)
#define GDB_TARGET_IS_SPARC64
-#ifdef __STDC__
struct value;
-#endif
/* Eeeew. Ok, we have to assume (for now) that the processor really is
in sparc64 mode. While this is the same instruction sequence as
Foundation, Inc., 59 Temple Place - Suite 330,
Boston, MA 02111-1307, USA. */
-#ifdef __STDC__
struct frame_info;
struct type;
struct value;
-#endif
#define TARGET_BYTE_ORDER BIG_ENDIAN
outs change into ins in different frames. HAVE_REGISTER_WINDOWS can't
deal with this case and also handle flat frames at the same time. */
-#ifdef __STDC__
struct frame_info;
-enum lval_type;
-#endif
void sparc_get_saved_register PARAMS ((char *raw_buffer, int *optimized, CORE_ADDR * addrp, struct frame_info * frame, int regnum, enum lval_type * lvalp));
#define GET_SAVED_REGISTER(raw_buffer, optimized, addrp, frame, regnum, lval) \
sparc_get_saved_register (raw_buffer, optimized, addrp, frame, regnum, lval)
-# Host: CCI or Harris Tahoe running BSD Unix
-
-XM_FILE= xm-tahoe.h
-XDEPFILES= infptrace.o inftarg.o fork-child.o corelow.o core-aout.o
+# OBSOLETE # Host: CCI or Harris Tahoe running BSD Unix
+# OBSOLETE
+# OBSOLETE XM_FILE= xm-tahoe.h
+# OBSOLETE XDEPFILES= infptrace.o inftarg.o fork-child.o corelow.o core-aout.o
-# Target: CCI or Harris Tahoe running BSD Unix
-TDEPFILES= tahoe-tdep.o
-TM_FILE= tm-tahoe.h
+# OBSOLETE # Target: CCI or Harris Tahoe running BSD Unix
+# OBSOLETE TDEPFILES= tahoe-tdep.o
+# OBSOLETE TM_FILE= tm-tahoe.h
-/* Definitions to make GDB target for a tahoe running 4.3-Reno.
- Copyright 1986, 1987, 1989, 1991, 1992, 1993 Free Software Foundation, Inc.
-
- This file is part of GDB.
-
- This program is free software; you can redistribute it and/or modify
- it under the terms of the GNU General Public License as published by
- the Free Software Foundation; either version 2 of the License, or
- (at your option) any later version.
-
- This program is distributed in the hope that it will be useful,
- but WITHOUT ANY WARRANTY; without even the implied warranty of
- MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- GNU General Public License for more details.
-
- You should have received a copy of the GNU General Public License
- along with this program; if not, write to the Free Software
- Foundation, Inc., 59 Temple Place - Suite 330,
- Boston, MA 02111-1307, USA. */
-
-/*
- * Ported by the State University of New York at Buffalo by the Distributed
- * Computer Systems Lab, Department of Computer Science, 1991.
- */
-
-#define TARGET_BYTE_ORDER BIG_ENDIAN
-#define BITS_BIG_ENDIAN 0
-
-/* Offset from address of function to start of its code.
- Zero on most machines. */
-
-#define FUNCTION_START_OFFSET 2
-
-/* Advance PC across any function entry prologue instructions
- to reach some "real" code. */
-
-extern CORE_ADDR tahoe_skip_prologue PARAMS ((CORE_ADDR));
-#define SKIP_PROLOGUE(pc) (tahoe_skip_prologue (pc))
-
-/* Immediately after a function call, return the saved pc.
- Can't always go through the frames for this because on some machines
- the new frame is not set up until the new function executes
- some instructions. */
-
-#define SAVED_PC_AFTER_CALL(frame) FRAME_SAVED_PC(frame)
-
-/* Wrong for cross-debugging. I don't know the real values. */
-#include <machine/param.h>
-#define TARGET_UPAGES UPAGES
-#define TARGET_NBPG NBPG
-
-/* Address of end of stack space. */
-
-#define STACK_END_ADDR (0xc0000000 - (TARGET_UPAGES * TARGET_NBPG))
-
-/* On BSD, sigtramp is in the u area. Can't check the exact
- addresses because for cross-debugging we don't have target include
- files around. This should be close enough. */
-#define IN_SIGTRAMP(pc, name) ((pc) >= STACK_END_ADDR && (pc < 0xc0000000))
-
-/* Stack grows downward. */
-
-#define INNER_THAN(lhs,rhs) ((lhs) < (rhs))
-
-/* Sequence of bytes for breakpoint instruction. */
-
-#define BREAKPOINT {0x30}
-
-/* Amount PC must be decremented by after a breakpoint.
- This is often the number of bytes in BREAKPOINT
- but not always. */
-
-#define DECR_PC_AFTER_BREAK 0
-
-/* Return 1 if P points to an invalid floating point value.
- LEN is the length in bytes -- not relevant on the Tahoe. */
-
-#define INVALID_FLOAT(p, len) ((*(short *) p & 0xff80) == 0x8000)
-
-/* Say how long (ordinary) registers are. This is a piece of bogosity
- used in push_word and a few other places; REGISTER_RAW_SIZE is the
- real way to know how big a register is. */
-
-#define REGISTER_SIZE 4
-
-/* Number of machine registers */
-
-#define NUM_REGS 19
-
-/* Initializer for an array of names of registers.
- There should be NUM_REGS strings in this initializer. */
-
-#define REGISTER_NAMES {"r0", "r1", "r2", "r3", "r4", "r5", "r6", "r7", "r8", "r9", "r10", "r11", "r12", "fp", "sp", "pc", "ps", "al", "ah"}
-
-#define FP_REGNUM 13 /* Contains address of executing stack frame */
-#define SP_REGNUM 14 /* Contains address of top of stack */
-#define PC_REGNUM 15 /* Contains program counter */
-#define PS_REGNUM 16 /* Contains processor status */
-
-#define AL_REGNUM 17 /* Contains accumulator */
-#define AH_REGNUM 18
-
-/* Total amount of space needed to store our copies of the machine's
- register state, the array `registers'. */
-
-#define REGISTER_BYTES (19*4)
-
-/* Index within `registers' of the first byte of the space for
- register N. */
-
-#define REGISTER_BYTE(N) ((N) * 4)
-
-/* Number of bytes of storage in the actual machine representation
- for register N. On the tahoe, all regs are 4 bytes. */
-
-#define REGISTER_RAW_SIZE(N) 4
-
-/* Number of bytes of storage in the program's representation
- for register N. On the tahoe, all regs are 4 bytes. */
-
-#define REGISTER_VIRTUAL_SIZE(N) 4
-
-/* Largest value REGISTER_RAW_SIZE can have. */
-
-#define MAX_REGISTER_RAW_SIZE 4
-
-/* Largest value REGISTER_VIRTUAL_SIZE can have. */
-
-#define MAX_REGISTER_VIRTUAL_SIZE 4
-
-/* Return the GDB type object for the "standard" data type
- of data in register N. */
-
-#define REGISTER_VIRTUAL_TYPE(N) builtin_type_int
-
-/* Store the address of the place in which to copy the structure the
- subroutine will return. This is called from call_function. */
-
-#define STORE_STRUCT_RETURN(ADDR, SP) \
- { write_register (1, (ADDR)); }
-
-/* Extract from an array REGBUF containing the (raw) register state
- a function return value of type TYPE, and copy that, in virtual format,
- into VALBUF. */
-
-#define EXTRACT_RETURN_VALUE(TYPE,REGBUF,VALBUF) \
- memcpy (VALBUF, REGBUF, TYPE_LENGTH (TYPE))
-
-/* Write into appropriate registers a function return value
- of type TYPE, given in virtual format. */
-
-#define STORE_RETURN_VALUE(TYPE,VALBUF) \
- write_register_bytes (0, VALBUF, TYPE_LENGTH (TYPE))
-
-/* Extract from an array REGBUF containing the (raw) register state
- the address in which a function should return its structure value,
- as a CORE_ADDR (or an expression that can be used as one). */
-
-#define EXTRACT_STRUCT_VALUE_ADDRESS(REGBUF) (*(int *)(REGBUF))
-
-/* Describe the pointer in each stack frame to the previous stack frame
- (its caller).
-
- FRAME_CHAIN takes a frame's nominal address
- and produces the frame's chain-pointer. */
-
-/* In the case of the Tahoe, the frame's nominal address is the FP value,
- and it points to the old FP */
-
-#define FRAME_CHAIN(thisframe) \
- (!inside_entry_file ((thisframe)->pc) ? \
- read_memory_integer ((thisframe)->frame, 4) :\
- 0)
-
-/* Define other aspects of the stack frame. */
-
-/* Saved PC */
-
-#define FRAME_SAVED_PC(FRAME) (read_memory_integer ((FRAME)->frame - 8, 4))
-
-/* In most of GDB, getting the args address is too important to
- just say "I don't know". */
-
-#define FRAME_ARGS_ADDRESS(fi) ((fi)->frame)
-
-/* Address to use as an anchor for finding local variables */
-
-#define FRAME_LOCALS_ADDRESS(fi) ((fi)->frame)
-
-/* Return number of args passed to a frame.
- Can return -1, meaning no way to tell. */
-
-extern int tahoe_frame_num_args PARAMS ((struct frame_info * fi));
-#define FRAME_NUM_ARGS(fi) (tahoe_frame_num_args ((fi)))
-
-/* Return number of bytes at start of arglist that are not really args. */
-
-#define FRAME_ARGS_SKIP 0
-
-/* Put here the code to store, into a struct frame_saved_regs,
- the addresses of the saved registers of frame described by FRAME_INFO.
- This includes special registers such as pc and fp saved in special
- ways in the stack frame. sp is even more special:
- the address we return for it IS the sp for the next frame. */
-
-#define FRAME_FIND_SAVED_REGS(frame_info, frame_saved_regs) \
-{ register int regnum; \
- register int rmask = read_memory_integer ((frame_info)->frame-4, 4) >> 16;\
- register CORE_ADDR next_addr; \
- memset (&frame_saved_regs, '\0', sizeof frame_saved_regs); \
- next_addr = (frame_info)->frame - 8; \
- for (regnum = 12; regnum >= 0; regnum--, rmask <<= 1) \
- (frame_saved_regs).regs[regnum] = (rmask & 0x1000) ? (next_addr -= 4) : 0;\
- (frame_saved_regs).regs[SP_REGNUM] = (frame_info)->frame + 4; \
- (frame_saved_regs).regs[PC_REGNUM] = (frame_info)->frame - 8; \
- (frame_saved_regs).regs[FP_REGNUM] = (frame_info)->frame; \
-}
-
-/* Things needed for making the inferior call functions. */
-
-/* Push an empty stack frame, to record the current PC, etc. */
-
-#define PUSH_DUMMY_FRAME \
-{ register CORE_ADDR sp = read_register (SP_REGNUM); \
- register int regnum; \
-printf("PUSH_DUMMY_FRAME\n"); \
- sp = push_word (sp, read_register (FP_REGNUM)); \
- write_register (FP_REGNUM, sp); \
- sp = push_word (sp, 0x1fff0004); /*SAVE MASK*/ \
- sp = push_word (sp, read_register (PC_REGNUM)); \
- for (regnum = 12; regnum >= 0; regnum--) \
- sp = push_word (sp, read_register (regnum)); \
- write_register (SP_REGNUM, sp); \
-}
-
-/* Discard from the stack the innermost frame, restoring all registers. */
-
-#define POP_FRAME \
-{ register CORE_ADDR fp = read_register (FP_REGNUM); \
- register int regnum; \
- register int regmask = read_memory_integer (fp-4, 4); \
-printf("POP_FRAME\n"); \
- regmask >>= 16; \
- write_register (SP_REGNUM, fp+4); \
- write_register (PC_REGNUM, read_memory_integer(fp-8, 4)); \
- write_register (FP_REGNUM, read_memory_integer(fp, 4)); \
- fp -= 8; \
- for (regnum = 12; regnum >= 0; regnum--, regmask <<= 1) \
- if (regmask & 0x1000) \
- write_register (regnum, read_memory_integer (fp-=4, 4)); \
- flush_cached_frames (); \
-}
-
-/* This sequence of words is the instructions
- calls #69, @#32323232
- bpt
- Note this is 8 bytes. */
-
-#define CALL_DUMMY {0xbf699f32, 0x32323230}
-
-/* Start execution at beginning of dummy */
-
-#define CALL_DUMMY_START_OFFSET 0
-
-/* Insert the specified number of args and function address
- into a call sequence of the above form stored at DUMMYNAME. */
-
-#define FIX_CALL_DUMMY(dummyname, pc, fun, nargs, args, valtype, using_gcc) \
-{ int temp = (int) fun; \
- *((char *) dummyname + 1) = nargs; \
- memcpy((char *)dummyname+3,&temp,4); }
+/* OBSOLETE /* Definitions to make GDB target for a tahoe running 4.3-Reno. */
+/* OBSOLETE Copyright 1986, 1987, 1989, 1991, 1992, 1993 Free Software Foundation, Inc. */
+/* OBSOLETE */
+/* OBSOLETE This file is part of GDB. */
+/* OBSOLETE */
+/* OBSOLETE This program is free software; you can redistribute it and/or modify */
+/* OBSOLETE it under the terms of the GNU General Public License as published by */
+/* OBSOLETE the Free Software Foundation; either version 2 of the License, or */
+/* OBSOLETE (at your option) any later version. */
+/* OBSOLETE */
+/* OBSOLETE This program is distributed in the hope that it will be useful, */
+/* OBSOLETE but WITHOUT ANY WARRANTY; without even the implied warranty of */
+/* OBSOLETE MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the */
+/* OBSOLETE GNU General Public License for more details. */
+/* OBSOLETE */
+/* OBSOLETE You should have received a copy of the GNU General Public License */
+/* OBSOLETE along with this program; if not, write to the Free Software */
+/* OBSOLETE Foundation, Inc., 59 Temple Place - Suite 330, */
+/* OBSOLETE Boston, MA 02111-1307, USA. *x/ */
+/* OBSOLETE */
+/* OBSOLETE /* */
+/* OBSOLETE * Ported by the State University of New York at Buffalo by the Distributed */
+/* OBSOLETE * Computer Systems Lab, Department of Computer Science, 1991. */
+/* OBSOLETE *x/ */
+/* OBSOLETE */
+/* OBSOLETE #define TARGET_BYTE_ORDER BIG_ENDIAN */
+/* OBSOLETE #define BITS_BIG_ENDIAN 0 */
+/* OBSOLETE */
+/* OBSOLETE /* Offset from address of function to start of its code. */
+/* OBSOLETE Zero on most machines. *x/ */
+/* OBSOLETE */
+/* OBSOLETE #define FUNCTION_START_OFFSET 2 */
+/* OBSOLETE */
+/* OBSOLETE /* Advance PC across any function entry prologue instructions */
+/* OBSOLETE to reach some "real" code. *x/ */
+/* OBSOLETE */
+/* OBSOLETE extern CORE_ADDR tahoe_skip_prologue PARAMS ((CORE_ADDR)); */
+/* OBSOLETE #define SKIP_PROLOGUE(pc) (tahoe_skip_prologue (pc)) */
+/* OBSOLETE */
+/* OBSOLETE /* Immediately after a function call, return the saved pc. */
+/* OBSOLETE Can't always go through the frames for this because on some machines */
+/* OBSOLETE the new frame is not set up until the new function executes */
+/* OBSOLETE some instructions. *x/ */
+/* OBSOLETE */
+/* OBSOLETE #define SAVED_PC_AFTER_CALL(frame) FRAME_SAVED_PC(frame) */
+/* OBSOLETE */
+/* OBSOLETE /* Wrong for cross-debugging. I don't know the real values. *x/ */
+/* OBSOLETE #include <machine/param.h> */
+/* OBSOLETE #define TARGET_UPAGES UPAGES */
+/* OBSOLETE #define TARGET_NBPG NBPG */
+/* OBSOLETE */
+/* OBSOLETE /* Address of end of stack space. *x/ */
+/* OBSOLETE */
+/* OBSOLETE #define STACK_END_ADDR (0xc0000000 - (TARGET_UPAGES * TARGET_NBPG)) */
+/* OBSOLETE */
+/* OBSOLETE /* On BSD, sigtramp is in the u area. Can't check the exact */
+/* OBSOLETE addresses because for cross-debugging we don't have target include */
+/* OBSOLETE files around. This should be close enough. *x/ */
+/* OBSOLETE #define IN_SIGTRAMP(pc, name) ((pc) >= STACK_END_ADDR && (pc < 0xc0000000)) */
+/* OBSOLETE */
+/* OBSOLETE /* Stack grows downward. *x/ */
+/* OBSOLETE */
+/* OBSOLETE #define INNER_THAN(lhs,rhs) ((lhs) < (rhs)) */
+/* OBSOLETE */
+/* OBSOLETE /* Sequence of bytes for breakpoint instruction. *x/ */
+/* OBSOLETE */
+/* OBSOLETE #define BREAKPOINT {0x30} */
+/* OBSOLETE */
+/* OBSOLETE /* Amount PC must be decremented by after a breakpoint. */
+/* OBSOLETE This is often the number of bytes in BREAKPOINT */
+/* OBSOLETE but not always. *x/ */
+/* OBSOLETE */
+/* OBSOLETE #define DECR_PC_AFTER_BREAK 0 */
+/* OBSOLETE */
+/* OBSOLETE /* Return 1 if P points to an invalid floating point value. */
+/* OBSOLETE LEN is the length in bytes -- not relevant on the Tahoe. *x/ */
+/* OBSOLETE */
+/* OBSOLETE #define INVALID_FLOAT(p, len) ((*(short *) p & 0xff80) == 0x8000) */
+/* OBSOLETE */
+/* OBSOLETE /* Say how long (ordinary) registers are. This is a piece of bogosity */
+/* OBSOLETE used in push_word and a few other places; REGISTER_RAW_SIZE is the */
+/* OBSOLETE real way to know how big a register is. *x/ */
+/* OBSOLETE */
+/* OBSOLETE #define REGISTER_SIZE 4 */
+/* OBSOLETE */
+/* OBSOLETE /* Number of machine registers *x/ */
+/* OBSOLETE */
+/* OBSOLETE #define NUM_REGS 19 */
+/* OBSOLETE */
+/* OBSOLETE /* Initializer for an array of names of registers. */
+/* OBSOLETE There should be NUM_REGS strings in this initializer. *x/ */
+/* OBSOLETE */
+/* OBSOLETE #define REGISTER_NAMES {"r0", "r1", "r2", "r3", "r4", "r5", "r6", "r7", "r8", "r9", "r10", "r11", "r12", "fp", "sp", "pc", "ps", "al", "ah"} */
+/* OBSOLETE */
+/* OBSOLETE #define FP_REGNUM 13 /* Contains address of executing stack frame *x/ */
+/* OBSOLETE #define SP_REGNUM 14 /* Contains address of top of stack *x/ */
+/* OBSOLETE #define PC_REGNUM 15 /* Contains program counter *x/ */
+/* OBSOLETE #define PS_REGNUM 16 /* Contains processor status *x/ */
+/* OBSOLETE */
+/* OBSOLETE #define AL_REGNUM 17 /* Contains accumulator *x/ */
+/* OBSOLETE #define AH_REGNUM 18 */
+/* OBSOLETE */
+/* OBSOLETE /* Total amount of space needed to store our copies of the machine's */
+/* OBSOLETE register state, the array `registers'. *x/ */
+/* OBSOLETE */
+/* OBSOLETE #define REGISTER_BYTES (19*4) */
+/* OBSOLETE */
+/* OBSOLETE /* Index within `registers' of the first byte of the space for */
+/* OBSOLETE register N. *x/ */
+/* OBSOLETE */
+/* OBSOLETE #define REGISTER_BYTE(N) ((N) * 4) */
+/* OBSOLETE */
+/* OBSOLETE /* Number of bytes of storage in the actual machine representation */
+/* OBSOLETE for register N. On the tahoe, all regs are 4 bytes. *x/ */
+/* OBSOLETE */
+/* OBSOLETE #define REGISTER_RAW_SIZE(N) 4 */
+/* OBSOLETE */
+/* OBSOLETE /* Number of bytes of storage in the program's representation */
+/* OBSOLETE for register N. On the tahoe, all regs are 4 bytes. *x/ */
+/* OBSOLETE */
+/* OBSOLETE #define REGISTER_VIRTUAL_SIZE(N) 4 */
+/* OBSOLETE */
+/* OBSOLETE /* Largest value REGISTER_RAW_SIZE can have. *x/ */
+/* OBSOLETE */
+/* OBSOLETE #define MAX_REGISTER_RAW_SIZE 4 */
+/* OBSOLETE */
+/* OBSOLETE /* Largest value REGISTER_VIRTUAL_SIZE can have. *x/ */
+/* OBSOLETE */
+/* OBSOLETE #define MAX_REGISTER_VIRTUAL_SIZE 4 */
+/* OBSOLETE */
+/* OBSOLETE /* Return the GDB type object for the "standard" data type */
+/* OBSOLETE of data in register N. *x/ */
+/* OBSOLETE */
+/* OBSOLETE #define REGISTER_VIRTUAL_TYPE(N) builtin_type_int */
+/* OBSOLETE */
+/* OBSOLETE /* Store the address of the place in which to copy the structure the */
+/* OBSOLETE subroutine will return. This is called from call_function. *x/ */
+/* OBSOLETE */
+/* OBSOLETE #define STORE_STRUCT_RETURN(ADDR, SP) \ */
+/* OBSOLETE { write_register (1, (ADDR)); } */
+/* OBSOLETE */
+/* OBSOLETE /* Extract from an array REGBUF containing the (raw) register state */
+/* OBSOLETE a function return value of type TYPE, and copy that, in virtual format, */
+/* OBSOLETE into VALBUF. *x/ */
+/* OBSOLETE */
+/* OBSOLETE #define EXTRACT_RETURN_VALUE(TYPE,REGBUF,VALBUF) \ */
+/* OBSOLETE memcpy (VALBUF, REGBUF, TYPE_LENGTH (TYPE)) */
+/* OBSOLETE */
+/* OBSOLETE /* Write into appropriate registers a function return value */
+/* OBSOLETE of type TYPE, given in virtual format. *x/ */
+/* OBSOLETE */
+/* OBSOLETE #define STORE_RETURN_VALUE(TYPE,VALBUF) \ */
+/* OBSOLETE write_register_bytes (0, VALBUF, TYPE_LENGTH (TYPE)) */
+/* OBSOLETE */
+/* OBSOLETE /* Extract from an array REGBUF containing the (raw) register state */
+/* OBSOLETE the address in which a function should return its structure value, */
+/* OBSOLETE as a CORE_ADDR (or an expression that can be used as one). *x/ */
+/* OBSOLETE */
+/* OBSOLETE #define EXTRACT_STRUCT_VALUE_ADDRESS(REGBUF) (*(int *)(REGBUF)) */
+/* OBSOLETE */
+/* OBSOLETE /* Describe the pointer in each stack frame to the previous stack frame */
+/* OBSOLETE (its caller). */
+/* OBSOLETE */
+/* OBSOLETE FRAME_CHAIN takes a frame's nominal address */
+/* OBSOLETE and produces the frame's chain-pointer. *x/ */
+/* OBSOLETE */
+/* OBSOLETE /* In the case of the Tahoe, the frame's nominal address is the FP value, */
+/* OBSOLETE and it points to the old FP *x/ */
+/* OBSOLETE */
+/* OBSOLETE #define FRAME_CHAIN(thisframe) \ */
+/* OBSOLETE (!inside_entry_file ((thisframe)->pc) ? \ */
+/* OBSOLETE read_memory_integer ((thisframe)->frame, 4) :\ */
+/* OBSOLETE 0) */
+/* OBSOLETE */
+/* OBSOLETE /* Define other aspects of the stack frame. *x/ */
+/* OBSOLETE */
+/* OBSOLETE /* Saved PC *x/ */
+/* OBSOLETE */
+/* OBSOLETE #define FRAME_SAVED_PC(FRAME) (read_memory_integer ((FRAME)->frame - 8, 4)) */
+/* OBSOLETE */
+/* OBSOLETE /* In most of GDB, getting the args address is too important to */
+/* OBSOLETE just say "I don't know". *x/ */
+/* OBSOLETE */
+/* OBSOLETE #define FRAME_ARGS_ADDRESS(fi) ((fi)->frame) */
+/* OBSOLETE */
+/* OBSOLETE /* Address to use as an anchor for finding local variables *x/ */
+/* OBSOLETE */
+/* OBSOLETE #define FRAME_LOCALS_ADDRESS(fi) ((fi)->frame) */
+/* OBSOLETE */
+/* OBSOLETE /* Return number of args passed to a frame. */
+/* OBSOLETE Can return -1, meaning no way to tell. *x/ */
+/* OBSOLETE */
+/* OBSOLETE extern int tahoe_frame_num_args PARAMS ((struct frame_info * fi)); */
+/* OBSOLETE #define FRAME_NUM_ARGS(fi) (tahoe_frame_num_args ((fi))) */
+/* OBSOLETE */
+/* OBSOLETE /* Return number of bytes at start of arglist that are not really args. *x/ */
+/* OBSOLETE */
+/* OBSOLETE #define FRAME_ARGS_SKIP 0 */
+/* OBSOLETE */
+/* OBSOLETE /* Put here the code to store, into a struct frame_saved_regs, */
+/* OBSOLETE the addresses of the saved registers of frame described by FRAME_INFO. */
+/* OBSOLETE This includes special registers such as pc and fp saved in special */
+/* OBSOLETE ways in the stack frame. sp is even more special: */
+/* OBSOLETE the address we return for it IS the sp for the next frame. *x/ */
+/* OBSOLETE */
+/* OBSOLETE #define FRAME_FIND_SAVED_REGS(frame_info, frame_saved_regs) \ */
+/* OBSOLETE { register int regnum; \ */
+/* OBSOLETE register int rmask = read_memory_integer ((frame_info)->frame-4, 4) >> 16;\ */
+/* OBSOLETE register CORE_ADDR next_addr; \ */
+/* OBSOLETE memset (&frame_saved_regs, '\0', sizeof frame_saved_regs); \ */
+/* OBSOLETE next_addr = (frame_info)->frame - 8; \ */
+/* OBSOLETE for (regnum = 12; regnum >= 0; regnum--, rmask <<= 1) \ */
+/* OBSOLETE (frame_saved_regs).regs[regnum] = (rmask & 0x1000) ? (next_addr -= 4) : 0;\ */
+/* OBSOLETE (frame_saved_regs).regs[SP_REGNUM] = (frame_info)->frame + 4; \ */
+/* OBSOLETE (frame_saved_regs).regs[PC_REGNUM] = (frame_info)->frame - 8; \ */
+/* OBSOLETE (frame_saved_regs).regs[FP_REGNUM] = (frame_info)->frame; \ */
+/* OBSOLETE } */
+/* OBSOLETE */
+/* OBSOLETE /* Things needed for making the inferior call functions. *x/ */
+/* OBSOLETE */
+/* OBSOLETE /* Push an empty stack frame, to record the current PC, etc. *x/ */
+/* OBSOLETE */
+/* OBSOLETE #define PUSH_DUMMY_FRAME \ */
+/* OBSOLETE { register CORE_ADDR sp = read_register (SP_REGNUM); \ */
+/* OBSOLETE register int regnum; \ */
+/* OBSOLETE printf("PUSH_DUMMY_FRAME\n"); \ */
+/* OBSOLETE sp = push_word (sp, read_register (FP_REGNUM)); \ */
+/* OBSOLETE write_register (FP_REGNUM, sp); \ */
+/* OBSOLETE sp = push_word (sp, 0x1fff0004); /*SAVE MASK*x/ \ */
+/* OBSOLETE sp = push_word (sp, read_register (PC_REGNUM)); \ */
+/* OBSOLETE for (regnum = 12; regnum >= 0; regnum--) \ */
+/* OBSOLETE sp = push_word (sp, read_register (regnum)); \ */
+/* OBSOLETE write_register (SP_REGNUM, sp); \ */
+/* OBSOLETE } */
+/* OBSOLETE */
+/* OBSOLETE /* Discard from the stack the innermost frame, restoring all registers. *x/ */
+/* OBSOLETE */
+/* OBSOLETE #define POP_FRAME \ */
+/* OBSOLETE { register CORE_ADDR fp = read_register (FP_REGNUM); \ */
+/* OBSOLETE register int regnum; \ */
+/* OBSOLETE register int regmask = read_memory_integer (fp-4, 4); \ */
+/* OBSOLETE printf("POP_FRAME\n"); \ */
+/* OBSOLETE regmask >>= 16; \ */
+/* OBSOLETE write_register (SP_REGNUM, fp+4); \ */
+/* OBSOLETE write_register (PC_REGNUM, read_memory_integer(fp-8, 4)); \ */
+/* OBSOLETE write_register (FP_REGNUM, read_memory_integer(fp, 4)); \ */
+/* OBSOLETE fp -= 8; \ */
+/* OBSOLETE for (regnum = 12; regnum >= 0; regnum--, regmask <<= 1) \ */
+/* OBSOLETE if (regmask & 0x1000) \ */
+/* OBSOLETE write_register (regnum, read_memory_integer (fp-=4, 4)); \ */
+/* OBSOLETE flush_cached_frames (); \ */
+/* OBSOLETE } */
+/* OBSOLETE */
+/* OBSOLETE /* This sequence of words is the instructions */
+/* OBSOLETE calls #69, @#32323232 */
+/* OBSOLETE bpt */
+/* OBSOLETE Note this is 8 bytes. *x/ */
+/* OBSOLETE */
+/* OBSOLETE #define CALL_DUMMY {0xbf699f32, 0x32323230} */
+/* OBSOLETE */
+/* OBSOLETE /* Start execution at beginning of dummy *x/ */
+/* OBSOLETE */
+/* OBSOLETE #define CALL_DUMMY_START_OFFSET 0 */
+/* OBSOLETE */
+/* OBSOLETE /* Insert the specified number of args and function address */
+/* OBSOLETE into a call sequence of the above form stored at DUMMYNAME. *x/ */
+/* OBSOLETE */
+/* OBSOLETE #define FIX_CALL_DUMMY(dummyname, pc, fun, nargs, args, valtype, using_gcc) \ */
+/* OBSOLETE { int temp = (int) fun; \ */
+/* OBSOLETE *((char *) dummyname + 1) = nargs; \ */
+/* OBSOLETE memcpy((char *)dummyname+3,&temp,4); } */
-/* Definitions to make GDB hosted on a tahoe running 4.3-Reno
- Copyright 1986, 1987, 1989, 1991, 1992 Free Software Foundation, Inc.
- Contributed by the State University of New York at Buffalo, by the
- Distributed Computer Systems Lab, Department of Computer Science, 1991.
-
- This file is part of GDB.
-
- This program is free software; you can redistribute it and/or modify
- it under the terms of the GNU General Public License as published by
- the Free Software Foundation; either version 2 of the License, or
- (at your option) any later version.
-
- This program is distributed in the hope that it will be useful,
- but WITHOUT ANY WARRANTY; without even the implied warranty of
- MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- GNU General Public License for more details.
-
- You should have received a copy of the GNU General Public License
- along with this program; if not, write to the Free Software
- Foundation, Inc., 59 Temple Place - Suite 330,
- Boston, MA 02111-1307, USA. */
-
-/* Make sure the system include files define BIG_ENDIAN, UINT_MAX, const,
- etc, rather than GDB's files. */
-#include <stdio.h>
-#include <sys/param.h>
-
-/* Host is big-endian */
-
-#define HOST_BYTE_ORDER BIG_ENDIAN
-
-/* This is the amount to subtract from u.u_ar0
- to get the offset in the core file of the register values. */
-
-#define KERNEL_U_ADDR (0xc0000000 - (TARGET_UPAGES * TARGET_NBPG))
-
-#define REGISTER_U_ADDR(addr, blockend, regno) \
-{ addr = blockend - 100 + regno * 4; \
- if (regno == PC_REGNUM) addr = blockend - 8; \
- if (regno == PS_REGNUM) addr = blockend - 4; \
- if (regno == FP_REGNUM) addr = blockend - 40; \
- if (regno == SP_REGNUM) addr = blockend - 36; \
- if (regno == AL_REGNUM) addr = blockend - 20; \
- if (regno == AH_REGNUM) addr = blockend - 24;}
-
-/* Interface definitions for kernel debugger KDB. */
-
-/* Map machine fault codes into signal numbers.
- First subtract 0, divide by 4, then index in a table.
- Faults for which the entry in this table is 0
- are not handled by KDB; the program's own trap handler
- gets to handle then. */
-
-#define FAULT_CODE_ORIGIN 0
-#define FAULT_CODE_UNITS 4
-#define FAULT_TABLE \
-{ 0, SIGKILL, SIGSEGV, 0, 0, 0, 0, 0, \
- 0, 0, SIGTRAP, SIGTRAP, 0, 0, 0, 0, \
- 0, 0, 0, 0, 0, 0, 0, 0}
-
-/* Start running with a stack stretching from BEG to END.
- BEG and END should be symbols meaningful to the assembler.
- This is used only for kdb. */
-
-#define INIT_STACK(beg, end) \
-{ asm (".globl end"); \
- asm ("movl $ end, sp"); \
- asm ("clrl fp"); }
-
-/* Push the frame pointer register on the stack. */
-
-#define PUSH_FRAME_PTR \
- asm ("pushl fp");
-
-/* Copy the top-of-stack to the frame pointer register. */
-
-#define POP_FRAME_PTR \
- asm ("movl (sp), fp");
-
-/* After KDB is entered by a fault, push all registers
- that GDB thinks about (all NUM_REGS of them),
- so that they appear in order of ascending GDB register number.
- The fault code will be on the stack beyond the last register. */
-
-#define PUSH_REGISTERS \
-{ asm ("pushl 8(sp)"); \
- asm ("pushl 8(sp)"); \
- asm ("pushal 0x41(sp)"); \
- asm ("pushl r0" ); \
- asm ("pushl r1" ); \
- asm ("pushl r2" ); \
- asm ("pushl r3" ); \
- asm ("pushl r4" ); \
- asm ("pushl r5" ); \
- asm ("pushl r6" ); \
- asm ("pushl r7" ); \
- asm ("pushl r8" ); \
- asm ("pushl r9" ); \
- asm ("pushl r10" ); \
- asm ("pushl r11" ); \
- asm ("pushl r12" ); \
- asm ("pushl fp" ); \
- asm ("pushl sp" ); \
- asm ("pushl pc" ); \
- asm ("pushl ps" ); \
- asm ("pushl aclo" ); \
- asm ("pushl achi" ); \
-}
-
-/* Assuming the registers (including processor status) have been
- pushed on the stack in order of ascending GDB register number,
- restore them and return to the address in the saved PC register. */
-
-#define POP_REGISTERS \
-{ \
- asm ("movl (sp)+, achi"); \
- asm ("movl (sp)+, aclo"); \
- asm ("movl (sp)+, ps"); \
- asm ("movl (sp)+, pc"); \
- asm ("movl (sp)+, sp"); \
- asm ("movl (sp)+, fp"); \
- asm ("movl (sp)+, r12"); \
- asm ("movl (sp)+, r11"); \
- asm ("movl (sp)+, r10"); \
- asm ("movl (sp)+, r9"); \
- asm ("movl (sp)+, r8"); \
- asm ("movl (sp)+, r7"); \
- asm ("movl (sp)+, r6"); \
- asm ("movl (sp)+, r5"); \
- asm ("movl (sp)+, r4"); \
- asm ("movl (sp)+, r3"); \
- asm ("movl (sp)+, r2"); \
- asm ("movl (sp)+, r1"); \
- asm ("movl (sp)+, r0"); \
- asm ("subl2 $8,(sp)"); \
- asm ("movl (sp),sp"); \
- asm ("rei"); }
+/* OBSOLETE /* Definitions to make GDB hosted on a tahoe running 4.3-Reno */
+/* OBSOLETE Copyright 1986, 1987, 1989, 1991, 1992 Free Software Foundation, Inc. */
+/* OBSOLETE Contributed by the State University of New York at Buffalo, by the */
+/* OBSOLETE Distributed Computer Systems Lab, Department of Computer Science, 1991. */
+/* OBSOLETE */
+/* OBSOLETE This file is part of GDB. */
+/* OBSOLETE */
+/* OBSOLETE This program is free software; you can redistribute it and/or modify */
+/* OBSOLETE it under the terms of the GNU General Public License as published by */
+/* OBSOLETE the Free Software Foundation; either version 2 of the License, or */
+/* OBSOLETE (at your option) any later version. */
+/* OBSOLETE */
+/* OBSOLETE This program is distributed in the hope that it will be useful, */
+/* OBSOLETE but WITHOUT ANY WARRANTY; without even the implied warranty of */
+/* OBSOLETE MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the */
+/* OBSOLETE GNU General Public License for more details. */
+/* OBSOLETE */
+/* OBSOLETE You should have received a copy of the GNU General Public License */
+/* OBSOLETE along with this program; if not, write to the Free Software */
+/* OBSOLETE Foundation, Inc., 59 Temple Place - Suite 330, */
+/* OBSOLETE Boston, MA 02111-1307, USA. *x/ */
+/* OBSOLETE */
+/* OBSOLETE /* Make sure the system include files define BIG_ENDIAN, UINT_MAX, const, */
+/* OBSOLETE etc, rather than GDB's files. *x/ */
+/* OBSOLETE #include <stdio.h> */
+/* OBSOLETE #include <sys/param.h> */
+/* OBSOLETE */
+/* OBSOLETE /* Host is big-endian *x/ */
+/* OBSOLETE */
+/* OBSOLETE #define HOST_BYTE_ORDER BIG_ENDIAN */
+/* OBSOLETE */
+/* OBSOLETE /* This is the amount to subtract from u.u_ar0 */
+/* OBSOLETE to get the offset in the core file of the register values. *x/ */
+/* OBSOLETE */
+/* OBSOLETE #define KERNEL_U_ADDR (0xc0000000 - (TARGET_UPAGES * TARGET_NBPG)) */
+/* OBSOLETE */
+/* OBSOLETE #define REGISTER_U_ADDR(addr, blockend, regno) \ */
+/* OBSOLETE { addr = blockend - 100 + regno * 4; \ */
+/* OBSOLETE if (regno == PC_REGNUM) addr = blockend - 8; \ */
+/* OBSOLETE if (regno == PS_REGNUM) addr = blockend - 4; \ */
+/* OBSOLETE if (regno == FP_REGNUM) addr = blockend - 40; \ */
+/* OBSOLETE if (regno == SP_REGNUM) addr = blockend - 36; \ */
+/* OBSOLETE if (regno == AL_REGNUM) addr = blockend - 20; \ */
+/* OBSOLETE if (regno == AH_REGNUM) addr = blockend - 24;} */
+/* OBSOLETE */
+/* OBSOLETE /* Interface definitions for kernel debugger KDB. *x/ */
+/* OBSOLETE */
+/* OBSOLETE /* Map machine fault codes into signal numbers. */
+/* OBSOLETE First subtract 0, divide by 4, then index in a table. */
+/* OBSOLETE Faults for which the entry in this table is 0 */
+/* OBSOLETE are not handled by KDB; the program's own trap handler */
+/* OBSOLETE gets to handle then. *x/ */
+/* OBSOLETE */
+/* OBSOLETE #define FAULT_CODE_ORIGIN 0 */
+/* OBSOLETE #define FAULT_CODE_UNITS 4 */
+/* OBSOLETE #define FAULT_TABLE \ */
+/* OBSOLETE { 0, SIGKILL, SIGSEGV, 0, 0, 0, 0, 0, \ */
+/* OBSOLETE 0, 0, SIGTRAP, SIGTRAP, 0, 0, 0, 0, \ */
+/* OBSOLETE 0, 0, 0, 0, 0, 0, 0, 0} */
+/* OBSOLETE */
+/* OBSOLETE /* Start running with a stack stretching from BEG to END. */
+/* OBSOLETE BEG and END should be symbols meaningful to the assembler. */
+/* OBSOLETE This is used only for kdb. *x/ */
+/* OBSOLETE */
+/* OBSOLETE #define INIT_STACK(beg, end) \ */
+/* OBSOLETE { asm (".globl end"); \ */
+/* OBSOLETE asm ("movl $ end, sp"); \ */
+/* OBSOLETE asm ("clrl fp"); } */
+/* OBSOLETE */
+/* OBSOLETE /* Push the frame pointer register on the stack. *x/ */
+/* OBSOLETE */
+/* OBSOLETE #define PUSH_FRAME_PTR \ */
+/* OBSOLETE asm ("pushl fp"); */
+/* OBSOLETE */
+/* OBSOLETE /* Copy the top-of-stack to the frame pointer register. *x/ */
+/* OBSOLETE */
+/* OBSOLETE #define POP_FRAME_PTR \ */
+/* OBSOLETE asm ("movl (sp), fp"); */
+/* OBSOLETE */
+/* OBSOLETE /* After KDB is entered by a fault, push all registers */
+/* OBSOLETE that GDB thinks about (all NUM_REGS of them), */
+/* OBSOLETE so that they appear in order of ascending GDB register number. */
+/* OBSOLETE The fault code will be on the stack beyond the last register. *x/ */
+/* OBSOLETE */
+/* OBSOLETE #define PUSH_REGISTERS \ */
+/* OBSOLETE { asm ("pushl 8(sp)"); \ */
+/* OBSOLETE asm ("pushl 8(sp)"); \ */
+/* OBSOLETE asm ("pushal 0x41(sp)"); \ */
+/* OBSOLETE asm ("pushl r0" ); \ */
+/* OBSOLETE asm ("pushl r1" ); \ */
+/* OBSOLETE asm ("pushl r2" ); \ */
+/* OBSOLETE asm ("pushl r3" ); \ */
+/* OBSOLETE asm ("pushl r4" ); \ */
+/* OBSOLETE asm ("pushl r5" ); \ */
+/* OBSOLETE asm ("pushl r6" ); \ */
+/* OBSOLETE asm ("pushl r7" ); \ */
+/* OBSOLETE asm ("pushl r8" ); \ */
+/* OBSOLETE asm ("pushl r9" ); \ */
+/* OBSOLETE asm ("pushl r10" ); \ */
+/* OBSOLETE asm ("pushl r11" ); \ */
+/* OBSOLETE asm ("pushl r12" ); \ */
+/* OBSOLETE asm ("pushl fp" ); \ */
+/* OBSOLETE asm ("pushl sp" ); \ */
+/* OBSOLETE asm ("pushl pc" ); \ */
+/* OBSOLETE asm ("pushl ps" ); \ */
+/* OBSOLETE asm ("pushl aclo" ); \ */
+/* OBSOLETE asm ("pushl achi" ); \ */
+/* OBSOLETE } */
+/* OBSOLETE */
+/* OBSOLETE /* Assuming the registers (including processor status) have been */
+/* OBSOLETE pushed on the stack in order of ascending GDB register number, */
+/* OBSOLETE restore them and return to the address in the saved PC register. *x/ */
+/* OBSOLETE */
+/* OBSOLETE #define POP_REGISTERS \ */
+/* OBSOLETE { \ */
+/* OBSOLETE asm ("movl (sp)+, achi"); \ */
+/* OBSOLETE asm ("movl (sp)+, aclo"); \ */
+/* OBSOLETE asm ("movl (sp)+, ps"); \ */
+/* OBSOLETE asm ("movl (sp)+, pc"); \ */
+/* OBSOLETE asm ("movl (sp)+, sp"); \ */
+/* OBSOLETE asm ("movl (sp)+, fp"); \ */
+/* OBSOLETE asm ("movl (sp)+, r12"); \ */
+/* OBSOLETE asm ("movl (sp)+, r11"); \ */
+/* OBSOLETE asm ("movl (sp)+, r10"); \ */
+/* OBSOLETE asm ("movl (sp)+, r9"); \ */
+/* OBSOLETE asm ("movl (sp)+, r8"); \ */
+/* OBSOLETE asm ("movl (sp)+, r7"); \ */
+/* OBSOLETE asm ("movl (sp)+, r6"); \ */
+/* OBSOLETE asm ("movl (sp)+, r5"); \ */
+/* OBSOLETE asm ("movl (sp)+, r4"); \ */
+/* OBSOLETE asm ("movl (sp)+, r3"); \ */
+/* OBSOLETE asm ("movl (sp)+, r2"); \ */
+/* OBSOLETE asm ("movl (sp)+, r1"); \ */
+/* OBSOLETE asm ("movl (sp)+, r0"); \ */
+/* OBSOLETE asm ("subl2 $8,(sp)"); \ */
+/* OBSOLETE asm ("movl (sp),sp"); \ */
+/* OBSOLETE asm ("rei"); } */
#ifndef TM_TIC80_H
#define TM_TIC80_H
-#ifdef __STDC__ /* Forward declare structs used in prototypes */
+/* Forward declare structs used in prototypes */
struct frame_info;
struct type;
struct value;
struct symbol;
struct frame_saved_regs;
-#endif
#define TARGET_BYTE_ORDER LITTLE_ENDIAN
#define SAVED_PC_AFTER_CALL(fi) read_register (RP_REGNUM)
-#ifdef __STDC__
struct frame_info;
struct frame_saved_regs;
struct type;
struct value;
-#endif
#define EXTRA_FRAME_INFO struct frame_saved_regs fsr;
#define FRAME_ARGS_SKIP 8
-#ifdef __STDC__
struct frame_info;
-#endif
extern void z8k_frame_init_saved_regs PARAMS ((struct frame_info *));
#define FRAME_INIT_SAVED_REGS(fi) z8k_frame_init_saved_regs (fi)
\f
memory.h objlist.h ptrace.h sgtty.h stddef.h stdlib.h \
string.h sys/procfs.h sys/ptrace.h sys/reg.h \
term.h termio.h termios.h unistd.h wait.h sys/wait.h \
- wchar.h wctype.h asm/debugreg.h sys/debugreg.h sys/select.h
+ wchar.h wctype.h asm/debugreg.h sys/debugreg.h sys/select.h \
+ time.h
do
ac_safe=`echo "$ac_hdr" | sed 'y%./+-%__p_%'`
echo $ac_n "checking for $ac_hdr""... $ac_c" 1>&6
-echo "configure:3224: checking for $ac_hdr" >&5
+echo "configure:3225: checking for $ac_hdr" >&5
if eval "test \"`echo '$''{'ac_cv_header_$ac_safe'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 3229 "configure"
+#line 3230 "configure"
#include "confdefs.h"
#include <$ac_hdr>
EOF
ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
-{ (eval echo configure:3234: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
+{ (eval echo configure:3235: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"`
if test -z "$ac_err"; then
rm -rf conftest*
done
echo $ac_n "checking whether stat file-mode macros are broken""... $ac_c" 1>&6
-echo "configure:3261: checking whether stat file-mode macros are broken" >&5
+echo "configure:3262: checking whether stat file-mode macros are broken" >&5
if eval "test \"`echo '$''{'ac_cv_header_stat_broken'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 3266 "configure"
+#line 3267 "configure"
#include "confdefs.h"
#include <sys/types.h>
#include <sys/stat.h>
echo $ac_n "checking for working const""... $ac_c" 1>&6
-echo "configure:3318: checking for working const" >&5
+echo "configure:3319: checking for working const" >&5
if eval "test \"`echo '$''{'ac_cv_c_const'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 3323 "configure"
+#line 3324 "configure"
#include "confdefs.h"
int main() {
; return 0; }
EOF
-if { (eval echo configure:3372: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+if { (eval echo configure:3373: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
rm -rf conftest*
ac_cv_c_const=yes
else
for ac_func in setpgid sbrk sigaction isascii bzero bcopy btowc poll
do
echo $ac_n "checking for $ac_func""... $ac_c" 1>&6
-echo "configure:3396: checking for $ac_func" >&5
+echo "configure:3397: checking for $ac_func" >&5
if eval "test \"`echo '$''{'ac_cv_func_$ac_func'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 3401 "configure"
+#line 3402 "configure"
#include "confdefs.h"
/* System header to define __stub macros and hopefully few prototypes,
which can conflict with char $ac_func(); below. */
; return 0; }
EOF
-if { (eval echo configure:3424: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:3425: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
eval "ac_cv_func_$ac_func=yes"
else
# The Ultrix 4.2 mips builtin alloca declared by alloca.h only works
# for constant arguments. Useless!
echo $ac_n "checking for working alloca.h""... $ac_c" 1>&6
-echo "configure:3451: checking for working alloca.h" >&5
+echo "configure:3452: checking for working alloca.h" >&5
if eval "test \"`echo '$''{'ac_cv_header_alloca_h'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 3456 "configure"
+#line 3457 "configure"
#include "confdefs.h"
#include <alloca.h>
int main() {
char *p = alloca(2 * sizeof(int));
; return 0; }
EOF
-if { (eval echo configure:3463: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:3464: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
ac_cv_header_alloca_h=yes
else
fi
echo $ac_n "checking for alloca""... $ac_c" 1>&6
-echo "configure:3484: checking for alloca" >&5
+echo "configure:3485: checking for alloca" >&5
if eval "test \"`echo '$''{'ac_cv_func_alloca_works'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 3489 "configure"
+#line 3490 "configure"
#include "confdefs.h"
#ifdef __GNUC__
char *p = (char *) alloca(1);
; return 0; }
EOF
-if { (eval echo configure:3517: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:3518: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
ac_cv_func_alloca_works=yes
else
echo $ac_n "checking whether alloca needs Cray hooks""... $ac_c" 1>&6
-echo "configure:3549: checking whether alloca needs Cray hooks" >&5
+echo "configure:3550: checking whether alloca needs Cray hooks" >&5
if eval "test \"`echo '$''{'ac_cv_os_cray'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 3554 "configure"
+#line 3555 "configure"
#include "confdefs.h"
#if defined(CRAY) && ! defined(CRAY2)
webecray
if test $ac_cv_os_cray = yes; then
for ac_func in _getb67 GETB67 getb67; do
echo $ac_n "checking for $ac_func""... $ac_c" 1>&6
-echo "configure:3579: checking for $ac_func" >&5
+echo "configure:3580: checking for $ac_func" >&5
if eval "test \"`echo '$''{'ac_cv_func_$ac_func'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 3584 "configure"
+#line 3585 "configure"
#include "confdefs.h"
/* System header to define __stub macros and hopefully few prototypes,
which can conflict with char $ac_func(); below. */
; return 0; }
EOF
-if { (eval echo configure:3607: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:3608: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
eval "ac_cv_func_$ac_func=yes"
else
fi
echo $ac_n "checking stack direction for C alloca""... $ac_c" 1>&6
-echo "configure:3634: checking stack direction for C alloca" >&5
+echo "configure:3635: checking stack direction for C alloca" >&5
if eval "test \"`echo '$''{'ac_cv_c_stack_direction'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
ac_cv_c_stack_direction=0
else
cat > conftest.$ac_ext <<EOF
-#line 3642 "configure"
+#line 3643 "configure"
#include "confdefs.h"
find_stack_direction ()
{
exit (find_stack_direction() < 0);
}
EOF
-if { (eval echo configure:3661: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null
+if { (eval echo configure:3662: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null
then
ac_cv_c_stack_direction=1
else
echo $ac_n "checking for socketpair in -lsocket""... $ac_c" 1>&6
-echo "configure:3684: checking for socketpair in -lsocket" >&5
+echo "configure:3685: checking for socketpair in -lsocket" >&5
ac_lib_var=`echo socket'_'socketpair | sed 'y%./+-%__p_%'`
if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
ac_save_LIBS="$LIBS"
LIBS="-lsocket $LIBS"
cat > conftest.$ac_ext <<EOF
-#line 3692 "configure"
+#line 3693 "configure"
#include "confdefs.h"
/* Override any gcc2 internal prototype to avoid an error. */
/* We use char because int might match the return type of a gcc2
socketpair()
; return 0; }
EOF
-if { (eval echo configure:3703: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:3704: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
eval "ac_cv_lib_$ac_lib_var=yes"
else
for ac_func in socketpair
do
echo $ac_n "checking for $ac_func""... $ac_c" 1>&6
-echo "configure:3733: checking for $ac_func" >&5
+echo "configure:3734: checking for $ac_func" >&5
if eval "test \"`echo '$''{'ac_cv_func_$ac_func'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 3738 "configure"
+#line 3739 "configure"
#include "confdefs.h"
/* System header to define __stub macros and hopefully few prototypes,
which can conflict with char $ac_func(); below. */
; return 0; }
EOF
-if { (eval echo configure:3761: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:3762: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
eval "ac_cv_func_$ac_func=yes"
else
echo $ac_n "checking whether malloc must be declared""... $ac_c" 1>&6
-echo "configure:3788: checking whether malloc must be declared" >&5
+echo "configure:3789: checking whether malloc must be declared" >&5
if eval "test \"`echo '$''{'bfd_cv_decl_needed_malloc'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 3793 "configure"
+#line 3794 "configure"
#include "confdefs.h"
#include <stdio.h>
char *(*pfn) = (char *(*)) malloc
; return 0; }
EOF
-if { (eval echo configure:3814: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+if { (eval echo configure:3815: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
rm -rf conftest*
bfd_cv_decl_needed_malloc=no
else
fi
echo $ac_n "checking whether realloc must be declared""... $ac_c" 1>&6
-echo "configure:3835: checking whether realloc must be declared" >&5
+echo "configure:3836: checking whether realloc must be declared" >&5
if eval "test \"`echo '$''{'bfd_cv_decl_needed_realloc'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 3840 "configure"
+#line 3841 "configure"
#include "confdefs.h"
#include <stdio.h>
char *(*pfn) = (char *(*)) realloc
; return 0; }
EOF
-if { (eval echo configure:3861: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+if { (eval echo configure:3862: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
rm -rf conftest*
bfd_cv_decl_needed_realloc=no
else
fi
echo $ac_n "checking whether free must be declared""... $ac_c" 1>&6
-echo "configure:3882: checking whether free must be declared" >&5
+echo "configure:3883: checking whether free must be declared" >&5
if eval "test \"`echo '$''{'bfd_cv_decl_needed_free'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 3887 "configure"
+#line 3888 "configure"
#include "confdefs.h"
#include <stdio.h>
char *(*pfn) = (char *(*)) free
; return 0; }
EOF
-if { (eval echo configure:3908: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+if { (eval echo configure:3909: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
rm -rf conftest*
bfd_cv_decl_needed_free=no
else
fi
echo $ac_n "checking whether strerror must be declared""... $ac_c" 1>&6
-echo "configure:3929: checking whether strerror must be declared" >&5
+echo "configure:3930: checking whether strerror must be declared" >&5
if eval "test \"`echo '$''{'bfd_cv_decl_needed_strerror'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 3934 "configure"
+#line 3935 "configure"
#include "confdefs.h"
#include <stdio.h>
char *(*pfn) = (char *(*)) strerror
; return 0; }
EOF
-if { (eval echo configure:3955: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+if { (eval echo configure:3956: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
rm -rf conftest*
bfd_cv_decl_needed_strerror=no
else
fi
echo $ac_n "checking whether strdup must be declared""... $ac_c" 1>&6
-echo "configure:3976: checking whether strdup must be declared" >&5
+echo "configure:3977: checking whether strdup must be declared" >&5
if eval "test \"`echo '$''{'bfd_cv_decl_needed_strdup'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 3981 "configure"
+#line 3982 "configure"
#include "confdefs.h"
#include <stdio.h>
char *(*pfn) = (char *(*)) strdup
; return 0; }
EOF
-if { (eval echo configure:4002: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+if { (eval echo configure:4003: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
rm -rf conftest*
bfd_cv_decl_needed_strdup=no
else
fi
echo $ac_n "checking whether strstr must be declared""... $ac_c" 1>&6
-echo "configure:4023: checking whether strstr must be declared" >&5
+echo "configure:4024: checking whether strstr must be declared" >&5
if eval "test \"`echo '$''{'bfd_cv_decl_needed_strstr'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 4028 "configure"
+#line 4029 "configure"
#include "confdefs.h"
#include <stdio.h>
char *(*pfn) = (char *(*)) strstr
; return 0; }
EOF
-if { (eval echo configure:4049: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+if { (eval echo configure:4050: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
rm -rf conftest*
bfd_cv_decl_needed_strstr=no
else
# could be expunged. --jsm 1999-03-22
echo $ac_n "checking for HPUX save_state structure""... $ac_c" 1>&6
-echo "configure:4076: checking for HPUX save_state structure" >&5
+echo "configure:4077: checking for HPUX save_state structure" >&5
cat > conftest.$ac_ext <<EOF
-#line 4078 "configure"
+#line 4079 "configure"
#include "confdefs.h"
#include <machine/save_state.h>
EOF
rm -f conftest*
cat > conftest.$ac_ext <<EOF
-#line 4093 "configure"
+#line 4094 "configure"
#include "confdefs.h"
#include <machine/save_state.h>
EOF
gdb_cv_hostos_is_solaris=yes ;;
esac
echo $ac_n "checking for directory proc entries""... $ac_c" 1>&6
-echo "configure:4145: checking for directory proc entries" >&5
+echo "configure:4146: checking for directory proc entries" >&5
# The [gdb_host != sun4sol2] hack is because Solaris does provide the
# multiple procfs files as of Solaris 2.6, but GDB can't use it right now.
if test "$ac_cv_header_sys_procfs_h" = yes -a \
if test "$ac_cv_header_sys_procfs_h" = yes; then
echo $ac_n "checking for pstatus_t in sys/procfs.h""... $ac_c" 1>&6
-echo "configure:4167: checking for pstatus_t in sys/procfs.h" >&5
+echo "configure:4168: checking for pstatus_t in sys/procfs.h" >&5
if eval "test \"`echo '$''{'bfd_cv_have_sys_procfs_type_pstatus_t'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 4172 "configure"
+#line 4173 "configure"
#include "confdefs.h"
#include <sys/procfs.h>
int main() {
pstatus_t avar
; return 0; }
EOF
-if { (eval echo configure:4179: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+if { (eval echo configure:4180: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
rm -rf conftest*
bfd_cv_have_sys_procfs_type_pstatus_t=yes
else
echo "$ac_t""$bfd_cv_have_sys_procfs_type_pstatus_t" 1>&6
echo $ac_n "checking for prrun_t in sys/procfs.h""... $ac_c" 1>&6
-echo "configure:4201: checking for prrun_t in sys/procfs.h" >&5
+echo "configure:4202: checking for prrun_t in sys/procfs.h" >&5
if eval "test \"`echo '$''{'bfd_cv_have_sys_procfs_type_prrun_t'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 4206 "configure"
+#line 4207 "configure"
#include "confdefs.h"
#include <sys/procfs.h>
int main() {
prrun_t avar
; return 0; }
EOF
-if { (eval echo configure:4213: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+if { (eval echo configure:4214: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
rm -rf conftest*
bfd_cv_have_sys_procfs_type_prrun_t=yes
else
echo "$ac_t""$bfd_cv_have_sys_procfs_type_prrun_t" 1>&6
echo $ac_n "checking for gregset_t in sys/procfs.h""... $ac_c" 1>&6
-echo "configure:4235: checking for gregset_t in sys/procfs.h" >&5
+echo "configure:4236: checking for gregset_t in sys/procfs.h" >&5
if eval "test \"`echo '$''{'bfd_cv_have_sys_procfs_type_gregset_t'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 4240 "configure"
+#line 4241 "configure"
#include "confdefs.h"
#include <sys/procfs.h>
int main() {
gregset_t avar
; return 0; }
EOF
-if { (eval echo configure:4247: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+if { (eval echo configure:4248: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
rm -rf conftest*
bfd_cv_have_sys_procfs_type_gregset_t=yes
else
echo "$ac_t""$bfd_cv_have_sys_procfs_type_gregset_t" 1>&6
echo $ac_n "checking for fpregset_t in sys/procfs.h""... $ac_c" 1>&6
-echo "configure:4269: checking for fpregset_t in sys/procfs.h" >&5
+echo "configure:4270: checking for fpregset_t in sys/procfs.h" >&5
if eval "test \"`echo '$''{'bfd_cv_have_sys_procfs_type_fpregset_t'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 4274 "configure"
+#line 4275 "configure"
#include "confdefs.h"
#include <sys/procfs.h>
int main() {
fpregset_t avar
; return 0; }
EOF
-if { (eval echo configure:4281: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+if { (eval echo configure:4282: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
rm -rf conftest*
bfd_cv_have_sys_procfs_type_fpregset_t=yes
else
echo $ac_n "checking for PIOCSET ioctl entry in sys/procfs.h""... $ac_c" 1>&6
-echo "configure:4305: checking for PIOCSET ioctl entry in sys/procfs.h" >&5
+echo "configure:4306: checking for PIOCSET ioctl entry in sys/procfs.h" >&5
if eval "test \"`echo '$''{'gdb_cv_have_procfs_piocset'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 4310 "configure"
+#line 4311 "configure"
#include "confdefs.h"
#include <unistd.h>
#include <sys/types.h>
; return 0; }
EOF
-if { (eval echo configure:4323: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+if { (eval echo configure:4324: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
rm -rf conftest*
gdb_cv_have_procfs_piocset=yes
else
fi
echo $ac_n "checking for main in -lm""... $ac_c" 1>&6
-echo "configure:4345: checking for main in -lm" >&5
+echo "configure:4346: checking for main in -lm" >&5
ac_lib_var=`echo m'_'main | sed 'y%./+-%__p_%'`
if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
ac_save_LIBS="$LIBS"
LIBS="-lm $LIBS"
cat > conftest.$ac_ext <<EOF
-#line 4353 "configure"
+#line 4354 "configure"
#include "confdefs.h"
int main() {
main()
; return 0; }
EOF
-if { (eval echo configure:4360: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:4361: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
eval "ac_cv_lib_$ac_lib_var=yes"
else
echo $ac_n "checking for wctype in -lc""... $ac_c" 1>&6
-echo "configure:4389: checking for wctype in -lc" >&5
+echo "configure:4390: checking for wctype in -lc" >&5
ac_lib_var=`echo c'_'wctype | sed 'y%./+-%__p_%'`
if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
ac_save_LIBS="$LIBS"
LIBS="-lc $LIBS"
cat > conftest.$ac_ext <<EOF
-#line 4397 "configure"
+#line 4398 "configure"
#include "confdefs.h"
/* Override any gcc2 internal prototype to avoid an error. */
/* We use char because int might match the return type of a gcc2
wctype()
; return 0; }
EOF
-if { (eval echo configure:4408: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:4409: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
eval "ac_cv_lib_$ac_lib_var=yes"
else
else
echo "$ac_t""no" 1>&6
echo $ac_n "checking for wctype in -lw""... $ac_c" 1>&6
-echo "configure:4427: checking for wctype in -lw" >&5
+echo "configure:4428: checking for wctype in -lw" >&5
ac_lib_var=`echo w'_'wctype | sed 'y%./+-%__p_%'`
if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
ac_save_LIBS="$LIBS"
LIBS="-lw $LIBS"
cat > conftest.$ac_ext <<EOF
-#line 4435 "configure"
+#line 4436 "configure"
#include "confdefs.h"
/* Override any gcc2 internal prototype to avoid an error. */
/* We use char because int might match the return type of a gcc2
wctype()
; return 0; }
EOF
-if { (eval echo configure:4446: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:4447: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
eval "ac_cv_lib_$ac_lib_var=yes"
else
echo $ac_n "checking for long long support in compiler""... $ac_c" 1>&6
-echo "configure:4478: checking for long long support in compiler" >&5
+echo "configure:4479: checking for long long support in compiler" >&5
if eval "test \"`echo '$''{'gdb_cv_c_long_long'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 4483 "configure"
+#line 4484 "configure"
#include "confdefs.h"
int main() {
; return 0; }
EOF
-if { (eval echo configure:4493: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+if { (eval echo configure:4494: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
rm -rf conftest*
gdb_cv_c_long_long=yes
else
echo $ac_n "checking for long long support in printf""... $ac_c" 1>&6
-echo "configure:4515: checking for long long support in printf" >&5
+echo "configure:4516: checking for long long support in printf" >&5
if eval "test \"`echo '$''{'gdb_cv_printf_has_long_long'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
gdb_cv_printf_has_long_long=no
else
cat > conftest.$ac_ext <<EOF
-#line 4523 "configure"
+#line 4524 "configure"
#include "confdefs.h"
int main () {
return (strcmp ("0x0123456789abcdef", buf));
}
EOF
-if { (eval echo configure:4537: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null
+if { (eval echo configure:4538: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null
then
gdb_cv_printf_has_long_long=yes
else
echo $ac_n "checking for long double support in compiler""... $ac_c" 1>&6
-echo "configure:4561: checking for long double support in compiler" >&5
+echo "configure:4562: checking for long double support in compiler" >&5
if eval "test \"`echo '$''{'ac_cv_c_long_double'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 4566 "configure"
+#line 4567 "configure"
#include "confdefs.h"
int main() {
long double foo;
; return 0; }
EOF
-if { (eval echo configure:4573: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+if { (eval echo configure:4574: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
rm -rf conftest*
ac_cv_c_long_double=yes
else
echo $ac_n "checking for long double support in printf""... $ac_c" 1>&6
-echo "configure:4595: checking for long double support in printf" >&5
+echo "configure:4596: checking for long double support in printf" >&5
if eval "test \"`echo '$''{'gdb_cv_printf_has_long_double'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
gdb_cv_printf_has_long_double=no
else
cat > conftest.$ac_ext <<EOF
-#line 4603 "configure"
+#line 4604 "configure"
#include "confdefs.h"
int main () {
return (strncmp ("3.14159", buf, 7));
}
EOF
-if { (eval echo configure:4613: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null
+if { (eval echo configure:4614: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null
then
gdb_cv_printf_has_long_double=yes
else
echo $ac_n "checking for long double support in scanf""... $ac_c" 1>&6
-echo "configure:4637: checking for long double support in scanf" >&5
+echo "configure:4638: checking for long double support in scanf" >&5
if eval "test \"`echo '$''{'gdb_cv_scanf_has_long_double'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
gdb_cv_scanf_has_long_double=no
else
cat > conftest.$ac_ext <<EOF
-#line 4645 "configure"
+#line 4646 "configure"
#include "confdefs.h"
int main () {
return !(f > 3.14159 && f < 3.14160);
}
EOF
-if { (eval echo configure:4655: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null
+if { (eval echo configure:4656: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null
then
gdb_cv_scanf_has_long_double=yes
else
do
ac_safe=`echo "$ac_hdr" | sed 'y%./+-%__p_%'`
echo $ac_n "checking for $ac_hdr""... $ac_c" 1>&6
-echo "configure:4681: checking for $ac_hdr" >&5
+echo "configure:4682: checking for $ac_hdr" >&5
if eval "test \"`echo '$''{'ac_cv_header_$ac_safe'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 4686 "configure"
+#line 4687 "configure"
#include "confdefs.h"
#include <$ac_hdr>
EOF
ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
-{ (eval echo configure:4691: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
+{ (eval echo configure:4692: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"`
if test -z "$ac_err"; then
rm -rf conftest*
for ac_func in getpagesize
do
echo $ac_n "checking for $ac_func""... $ac_c" 1>&6
-echo "configure:4720: checking for $ac_func" >&5
+echo "configure:4721: checking for $ac_func" >&5
if eval "test \"`echo '$''{'ac_cv_func_$ac_func'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 4725 "configure"
+#line 4726 "configure"
#include "confdefs.h"
/* System header to define __stub macros and hopefully few prototypes,
which can conflict with char $ac_func(); below. */
; return 0; }
EOF
-if { (eval echo configure:4748: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:4749: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
eval "ac_cv_func_$ac_func=yes"
else
done
echo $ac_n "checking for working mmap""... $ac_c" 1>&6
-echo "configure:4773: checking for working mmap" >&5
+echo "configure:4774: checking for working mmap" >&5
if eval "test \"`echo '$''{'ac_cv_func_mmap_fixed_mapped'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
ac_cv_func_mmap_fixed_mapped=no
else
cat > conftest.$ac_ext <<EOF
-#line 4781 "configure"
+#line 4782 "configure"
#include "confdefs.h"
/* Thanks to Mike Haertel and Jim Avera for this test.
}
EOF
-if { (eval echo configure:4921: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null
+if { (eval echo configure:4922: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null
then
ac_cv_func_mmap_fixed_mapped=yes
else
case ${host_os} in
hpux*)
echo $ac_n "checking for HPUX/OSF thread support""... $ac_c" 1>&6
-echo "configure:4950: checking for HPUX/OSF thread support" >&5
+echo "configure:4951: checking for HPUX/OSF thread support" >&5
if test -f /usr/include/dce/cma_config.h ; then
if test "$GCC" = "yes" ; then
echo "$ac_t""yes" 1>&6
;;
solaris*)
echo $ac_n "checking for Solaris thread debugging library""... $ac_c" 1>&6
-echo "configure:4969: checking for Solaris thread debugging library" >&5
+echo "configure:4970: checking for Solaris thread debugging library" >&5
if test -f /usr/lib/libthread_db.so.1 ; then
echo "$ac_t""yes" 1>&6
cat >> confdefs.h <<\EOF
CONFIG_OBS="${CONFIG_OBS} sol-thread.o"
CONFIG_SRCS="${CONFIG_SRCS} sol-thread.c"
echo $ac_n "checking for dlopen in -ldl""... $ac_c" 1>&6
-echo "configure:4979: checking for dlopen in -ldl" >&5
+echo "configure:4980: checking for dlopen in -ldl" >&5
ac_lib_var=`echo dl'_'dlopen | sed 'y%./+-%__p_%'`
if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
ac_save_LIBS="$LIBS"
LIBS="-ldl $LIBS"
cat > conftest.$ac_ext <<EOF
-#line 4987 "configure"
+#line 4988 "configure"
#include "confdefs.h"
/* Override any gcc2 internal prototype to avoid an error. */
/* We use char because int might match the return type of a gcc2
dlopen()
; return 0; }
EOF
-if { (eval echo configure:4998: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:4999: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
eval "ac_cv_lib_$ac_lib_var=yes"
else
# all symbols visible in the dynamic symbol table.
hold_ldflags=$LDFLAGS
echo $ac_n "checking for the ld -export-dynamic flag""... $ac_c" 1>&6
-echo "configure:5030: checking for the ld -export-dynamic flag" >&5
+echo "configure:5031: checking for the ld -export-dynamic flag" >&5
LDFLAGS="${LDFLAGS} -Wl,-export-dynamic"
cat > conftest.$ac_ext <<EOF
-#line 5033 "configure"
+#line 5034 "configure"
#include "confdefs.h"
int main() {
int i;
; return 0; }
EOF
-if { (eval echo configure:5040: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:5041: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
found=yes
else
# Sun randomly tweaked the prototypes in <proc_service.h>
# at one point.
echo $ac_n "checking if <proc_service.h> is old""... $ac_c" 1>&6
-echo "configure:50
59: checking if <proc_service.h> is old" >&5
+echo "configure:50
60: checking if <proc_service.h> is old" >&5
if eval "test \"`echo '$''{'gdb_cv_proc_service_is_old'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 5065 "configure"
+#line 5066 "configure"
#include "confdefs.h"
#include <proc_service.h>
; return 0; }
EOF
-if { (eval echo configure:5076: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+if { (eval echo configure:5077: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
rm -rf conftest*
gdb_cv_proc_service_is_old=no
else
build_warnings=""
fi
+WARN_CFLAGS=""
+WERROR_CFLAGS=""
if test "x${build_warnings}" != x -a "x$GCC" = xyes
then
- WARN_CFLAGS="${build_warnings}"
-else
- WARN_CFLAGS=""
+ # Separate out the -Werror flag as some files just cannot be
+ # compiled with it enabled.
+ for w in ${build_warnings}; do
+ case $w in
+ -Werr*) WERROR_CFLAGS=-Werror ;;
+ *) WARN_CFLAGS="${WARN_CFLAGS} $w"
+ esac
+ done
fi
+
MMALLOC_CFLAGS=
MMALLOC=
# In the Cygwin environment, we need some additional flags.
echo $ac_n "checking for cygwin""... $ac_c" 1>&6
-echo "configure:5334: checking for cygwin" >&5
+echo "configure:5343: checking for cygwin" >&5
if eval "test \"`echo '$''{'gdb_cv_os_cygwin'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 5339 "configure"
+#line 5348 "configure"
#include "confdefs.h"
#if defined (__CYGWIN__) || defined (__CYGWIN32__)
else
TERM_LIB=
echo $ac_n "checking for tgetent in -lncurses""... $ac_c" 1>&6
-echo "configure:5373: checking for tgetent in -lncurses" >&5
+echo "configure:5382: checking for tgetent in -lncurses" >&5
ac_lib_var=`echo ncurses'_'tgetent | sed 'y%./+-%__p_%'`
if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
ac_save_LIBS="$LIBS"
LIBS="-lncurses $LIBS"
cat > conftest.$ac_ext <<EOF
-#line 5381 "configure"
+#line 5390 "configure"
#include "confdefs.h"
/* Override any gcc2 internal prototype to avoid an error. */
/* We use char because int might match the return type of a gcc2
tgetent()
; return 0; }
EOF
-if { (eval echo configure:5392: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:5401: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
eval "ac_cv_lib_$ac_lib_var=yes"
else
else
echo "$ac_t""no" 1>&6
echo $ac_n "checking for tgetent in -lHcurses""... $ac_c" 1>&6
-echo "configure:5411: checking for tgetent in -lHcurses" >&5
+echo "configure:5420: checking for tgetent in -lHcurses" >&5
ac_lib_var=`echo Hcurses'_'tgetent | sed 'y%./+-%__p_%'`
if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
ac_save_LIBS="$LIBS"
LIBS="-lHcurses $LIBS"
cat > conftest.$ac_ext <<EOF
-#line 5419 "configure"
+#line 5428 "configure"
#include "confdefs.h"
/* Override any gcc2 internal prototype to avoid an error. */
/* We use char because int might match the return type of a gcc2
tgetent()
; return 0; }
EOF
-if { (eval echo configure:5430: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:5439: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
eval "ac_cv_lib_$ac_lib_var=yes"
else
else
echo "$ac_t""no" 1>&6
echo $ac_n "checking for tgetent in -ltermlib""... $ac_c" 1>&6
-echo "configure:5449: checking for tgetent in -ltermlib" >&5
+echo "configure:5458: checking for tgetent in -ltermlib" >&5
ac_lib_var=`echo termlib'_'tgetent | sed 'y%./+-%__p_%'`
if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
ac_save_LIBS="$LIBS"
LIBS="-ltermlib $LIBS"
cat > conftest.$ac_ext <<EOF
-#line 5457 "configure"
+#line 5466 "configure"
#include "confdefs.h"
/* Override any gcc2 internal prototype to avoid an error. */
/* We use char because int might match the return type of a gcc2
tgetent()
; return 0; }
EOF
-if { (eval echo configure:5468: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:5477: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
eval "ac_cv_lib_$ac_lib_var=yes"
else
else
echo "$ac_t""no" 1>&6
echo $ac_n "checking for tgetent in -ltermcap""... $ac_c" 1>&6
-echo "configure:5487: checking for tgetent in -ltermcap" >&5
+echo "configure:5496: checking for tgetent in -ltermcap" >&5
ac_lib_var=`echo termcap'_'tgetent | sed 'y%./+-%__p_%'`
if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
ac_save_LIBS="$LIBS"
LIBS="-ltermcap $LIBS"
cat > conftest.$ac_ext <<EOF
-#line 5495 "configure"
+#line 5504 "configure"
#include "confdefs.h"
/* Override any gcc2 internal prototype to avoid an error. */
/* We use char because int might match the return type of a gcc2
tgetent()
; return 0; }
EOF
-if { (eval echo configure:5506: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:5515: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
eval "ac_cv_lib_$ac_lib_var=yes"
else
else
echo "$ac_t""no" 1>&6
echo $ac_n "checking for tgetent in -lcurses""... $ac_c" 1>&6
-echo "configure:5525: checking for tgetent in -lcurses" >&5
+echo "configure:5534: checking for tgetent in -lcurses" >&5
ac_lib_var=`echo curses'_'tgetent | sed 'y%./+-%__p_%'`
if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
ac_save_LIBS="$LIBS"
LIBS="-lcurses $LIBS"
cat > conftest.$ac_ext <<EOF
-#line 5533 "configure"
+#line 5542 "configure"
#include "confdefs.h"
/* Override any gcc2 internal prototype to avoid an error. */
/* We use char because int might match the return type of a gcc2
tgetent()
; return 0; }
EOF
-if { (eval echo configure:5544: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:5553: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
eval "ac_cv_lib_$ac_lib_var=yes"
else
else
echo "$ac_t""no" 1>&6
echo $ac_n "checking for tgetent in -lterminfo""... $ac_c" 1>&6
-echo "configure:5563: checking for tgetent in -lterminfo" >&5
+echo "configure:5572: checking for tgetent in -lterminfo" >&5
ac_lib_var=`echo terminfo'_'tgetent | sed 'y%./+-%__p_%'`
if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
ac_save_LIBS="$LIBS"
LIBS="-lterminfo $LIBS"
cat > conftest.$ac_ext <<EOF
-#line 5571 "configure"
+#line 5580 "configure"
#include "confdefs.h"
/* Override any gcc2 internal prototype to avoid an error. */
/* We use char because int might match the return type of a gcc2
tgetent()
; return 0; }
EOF
-if { (eval echo configure:5582: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:5591: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
eval "ac_cv_lib_$ac_lib_var=yes"
else
# Uses ac_ vars as temps to allow command line to override cache and checks.
# --without-x overrides everything else, but does not touch the cache.
echo $ac_n "checking for X""... $ac_c" 1>&6
-echo "configure:6718: checking for X" >&5
+echo "configure:6727: checking for X" >&5
# Check whether --with-x or --without-x was given.
if test "${with_x+set}" = set; then
# First, try using that file with no special directory specified.
cat > conftest.$ac_ext <<EOF
-#line 6780 "configure"
+#line 6789 "configure"
#include "confdefs.h"
#include <$x_direct_test_include>
EOF
ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
-{ (eval echo configure:6785: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
+{ (eval echo configure:6794: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"`
if test -z "$ac_err"; then
rm -rf conftest*
ac_save_LIBS="$LIBS"
LIBS="-l$x_direct_test_library $LIBS"
cat > conftest.$ac_ext <<EOF
-#line 6854 "configure"
+#line 6863 "configure"
#include "confdefs.h"
int main() {
${x_direct_test_function}()
; return 0; }
EOF
-if { (eval echo configure:6861: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:6870: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
LIBS="$ac_save_LIBS"
# We can link X programs with no special library path.
echo $ac_n "checking for Cygwin environment""... $ac_c" 1>&6
-echo "configure:7212: checking for Cygwin environment" >&5
+echo "configure:7221: checking for Cygwin environment" >&5
if eval "test \"`echo '$''{'ac_cv_cygwin'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 7217 "configure"
+#line 7226 "configure"
#include "confdefs.h"
int main() {
return __CYGWIN__;
; return 0; }
EOF
-if { (eval echo configure:7228: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+if { (eval echo configure:7237: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
rm -rf conftest*
ac_cv_cygwin=yes
else
CYGWIN=
test "$ac_cv_cygwin" = yes && CYGWIN=yes
echo $ac_n "checking for mingw32 environment""... $ac_c" 1>&6
-echo "configure:7245: checking for mingw32 environment" >&5
+echo "configure:7254: checking for mingw32 environment" >&5
if eval "test \"`echo '$''{'ac_cv_mingw32'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 7250 "configure"
+#line 7259 "configure"
#include "confdefs.h"
int main() {
return __MINGW32__;
; return 0; }
EOF
-if { (eval echo configure:7257: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+if { (eval echo configure:7266: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
rm -rf conftest*
ac_cv_mingw32=yes
else
echo $ac_n "checking for executable suffix""... $ac_c" 1>&6
-echo "configure:7276: checking for executable suffix" >&5
+echo "configure:7285: checking for executable suffix" >&5
if eval "test \"`echo '$''{'ac_cv_exeext'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
rm -f conftest*
echo 'int main () { return 0; }' > conftest.$ac_ext
ac_cv_exeext=
- if { (eval echo configure:7286: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; }; then
+ if { (eval echo configure:7295: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; }; then
for file in conftest.*; do
case $file in
*.c | *.o | *.obj) ;;
s%@BUILD_TUI@%$BUILD_TUI%g
s%@TUI_LIBRARY@%$TUI_LIBRARY%g
s%@WARN_CFLAGS@%$WARN_CFLAGS%g
+s%@WERROR_CFLAGS@%$WERROR_CFLAGS%g
s%@MMALLOC_CFLAGS@%$MMALLOC_CFLAGS%g
s%@MMALLOC@%$MMALLOC%g
s%@MACHINE_OBS@%$MACHINE_OBS%g
strongarm-*-*) gdb_host=arm ;;
-tahoe-*-*) gdb_host=tahoe ;;
+# OBSOLETE tahoe-*-*) gdb_host=tahoe ;;
vax-*-bsd*) gdb_host=vaxbsd ;;
vax-*-ultrix2*) gdb_host=vaxult2 ;;
memory.h objlist.h ptrace.h sgtty.h stddef.h stdlib.h \
string.h sys/procfs.h sys/ptrace.h sys/reg.h \
term.h termio.h termios.h unistd.h wait.h sys/wait.h \
- wchar.h wctype.h asm/debugreg.h sys/debugreg.h sys/select.h)
+ wchar.h wctype.h asm/debugreg.h sys/debugreg.h sys/select.h \
+ time.h)
AC_HEADER_STAT
AC_C_CONST
*) build_warnings=`echo "${enableval}" | sed -e "s/,/ /g"`;;
esac],[build_warnings=""])dnl
+WARN_CFLAGS=""
+WERROR_CFLAGS=""
if test "x${build_warnings}" != x -a "x$GCC" = xyes
then
- WARN_CFLAGS="${build_warnings}"
-else
- WARN_CFLAGS=""
+ # Separate out the -Werror flag as some files just cannot be
+ # compiled with it enabled.
+ for w in ${build_warnings}; do
+ case $w in
+ -Werr*) WERROR_CFLAGS=-Werror ;;
+ *) WARN_CFLAGS="${WARN_CFLAGS} $w"
+ esac
+ done
fi
AC_SUBST(WARN_CFLAGS)
+AC_SUBST(WERROR_CFLAGS)
MMALLOC_CFLAGS=
MMALLOC=
#sparc64-*-solaris2*) gdb_target=sp64sol2 ;;
sparc64-*-*) gdb_target=sp64 ;;
-tahoe-*-*) gdb_target=tahoe ;;
+# OBSOLETE tahoe-*-*) gdb_target=tahoe ;;
tic80-*-*) gdb_target=tic80
configdirs="${configdirs} gdbserver" ;;
#include <errno.h>
#include <signal.h>
#include <fcntl.h>
-#include <unistd.h>
#include "frame.h" /* required by inferior.h */
#include "inferior.h"
#include "symtab.h"
#include "dis-asm.h"
#include "symfile.h"
#include "objfiles.h"
+#include "language.h"
struct frame_extra_info
{
# include <sys/types.h> /* for size_t */
#endif
+#ifdef HAVE_UNISTD_H
+#include <unistd.h>
+#endif
+
/* Just in case they're not defined in stdio.h. */
#ifndef SEEK_SET
typedef bfd_vma CORE_ADDR;
+/* This is to make sure that LONGEST is at least as big as CORE_ADDR. */
+
+#ifndef LONGEST
+
+#ifdef BFD64
+
+#define LONGEST BFD_HOST_64_BIT
+#define ULONGEST BFD_HOST_U_64_BIT
+
+#else /* No BFD64 */
+
+# ifdef CC_HAS_LONG_LONG
+# define LONGEST long long
+# define ULONGEST unsigned long long
+# else
+/* BFD_HOST_64_BIT is defined for some hosts that don't have long long
+ (e.g. i386-windows) so try it. */
+# ifdef BFD_HOST_64_BIT
+# define LONGEST BFD_HOST_64_BIT
+# define ULONGEST BFD_HOST_U_64_BIT
+# else
+# define LONGEST long
+# define ULONGEST unsigned long
+# endif
+# endif
+
+#endif /* No BFD64 */
+
+#endif /* ! LONGEST */
+
extern int core_addr_lessthan PARAMS ((CORE_ADDR lhs, CORE_ADDR rhs));
extern int core_addr_greaterthan PARAMS ((CORE_ADDR lhs, CORE_ADDR rhs));
/* Needed for various prototypes */
-#ifdef __STDC__
struct symtab;
struct breakpoint;
-#endif
/* From blockframe.c */
extern void reinitialize_more_filter PARAMS ((void));
-/* new */
-enum streamtype
-{
- afile,
- astring
-};
-
-/* new */
-struct tui_stream
-{
- int *ts_magic;
- enum streamtype ts_streamtype;
- FILE *ts_filestream;
- char *ts_strbuf;
- int ts_buflen;
-};
-
struct gdb_file;
typedef struct gdb_file GDB_FILE; /* deprecated */
extern void gdb_print_address PARAMS ((void *, GDB_FILE *));
-typedef bfd_vma t_addr;
-typedef bfd_vma t_reg;
-extern char* paddr PARAMS ((t_addr addr));
-
-extern char* preg PARAMS ((t_reg reg));
-
-extern char* paddr_nz PARAMS ((t_addr addr));
+/* Convert a CORE_ADDR into a HEX string. paddr() is like %08lx.
+ paddr_nz() is like %lx. paddr_u() is like %lu. paddr_width() is
+ for ``%*''. */
+extern int strlen_paddr ();
+extern char* paddr (CORE_ADDR addr);
+extern char* paddr_nz (CORE_ADDR addr);
+extern char* paddr_u (CORE_ADDR addr);
+extern char* paddr_d (LONGEST addr);
-extern char* preg_nz PARAMS ((t_reg reg));
+typedef bfd_vma t_reg;
+extern char* preg (t_reg reg);
+extern char* preg_nz (t_reg reg);
extern void fprintf_symbol_filtered PARAMS ((GDB_FILE *, char *,
enum language, int));
extern char *symtab_to_filename PARAMS ((struct symtab *));
+/* From exec.c */
+
+extern void exec_set_section_offsets (bfd_signed_vma text_off,
+ bfd_signed_vma data_off,
+ bfd_signed_vma bss_off);
+
/* From findvar.c */
extern int read_relative_register_raw_bytes PARAMS ((int, char *));
#define LONG_MAX ((long)(ULONG_MAX >> 1)) /* 0x7FFFFFFF for 32-bits */
#endif
-#ifndef LONGEST
-
-#ifdef BFD64
-
-/* This is to make sure that LONGEST is at least as big as CORE_ADDR. */
-
-#define LONGEST BFD_HOST_64_BIT
-#define ULONGEST BFD_HOST_U_64_BIT
-
-#else /* No BFD64 */
-
-# ifdef CC_HAS_LONG_LONG
-# define LONGEST long long
-# define ULONGEST unsigned long long
-# else
-/* BFD_HOST_64_BIT is defined for some hosts that don't have long long
- (e.g. i386-windows) so try it. */
-# ifdef BFD_HOST_64_BIT
-# define LONGEST BFD_HOST_64_BIT
-# define ULONGEST BFD_HOST_U_64_BIT
-# else
-# define LONGEST long
-# define ULONGEST unsigned long
-# endif
-# endif
-
-#endif /* No BFD64 */
-
-#endif /* ! LONGEST */
-
/* Convert a LONGEST to an int. This is used in contexts (e.g. number of
arguments to a function, number in a value history, register number, etc.)
where the value must not be larger than can fit in an int. */
extern int watchdog;
/* Hooks for alternate command interfaces. */
-#ifdef __STDC__
struct target_waitstatus;
struct cmd_list_element;
-#endif
/* Should the asynchronous variant of the interpreter (using the
event-loop) be enabled? */
#define STDERR_FILENO 2
#endif
+/* If this definition isn't overridden by the header files, assume
+ that isatty and fileno exist on this system. */
+#ifndef ISATTY
+#define ISATTY(FP) (isatty (fileno (FP)))
+#endif
+
#endif /* #ifndef DEFS_H */
+1999-08-30 Stan Shebs <shebs@andros.cygnus.com>
+
+ * gdb.texinfo: Create a new "Configurations" chapter with
+ platform-specific info, inline remote.texi and move sections of it
+ into the new chapter, move bits about info proc, heuristic search,
+ and register stack into the new chapter.
+ * remote.texi: Remove, now part of gdb.texinfo.
+ * Makefile.in (SFILES_INCLUDED): Remove ref to remote.texi.
+
+1999-08-27 Jason Molenda (jsm@bugshack.cygnus.com)
+
+ * gdbint.texinfo (GDB_TARGET_IS_SUN3, GDB_TARGET_IS_SUN386,
+ GDB_TARGET_IS_MACH386): These kludges have gone away.
+
+Wed Aug 25 10:47:03 1999 Andrew Cagney <cagney@b1.cygnus.com>
+
+ * gdbint.texinfo (Target Architecture Definition): Mention
+ TDEPLIBS.
+
1999-08-20 Stan Shebs <shebs@andros.cygnus.com>
* gdb.texinfo: Remove remaining "HPPA" conditionals, rewrite
DVIPS = dvips
# Main GDB manual's source files
-SFILES_INCLUDED = gdb-cfg.texi $(srcdir)/remote.texi
+SFILES_INCLUDED = gdb-cfg.texi
SFILES_LOCAL = $(srcdir)/gdb.texinfo GDBvn.texi $(SFILES_INCLUDED)
* Altering:: Altering execution
* GDB Files:: @value{GDBN} files
* Targets:: Specifying a debugging target
+* Configurations:: Configuration-specific information
* Controlling GDB:: Controlling @value{GDBN}
* Sequences:: Canned sequences of commands
* Emacs:: Using @value{GDBN} under @sc{gnu} Emacs
* Input/Output:: Your program's input and output
* Attach:: Debugging an already-running process
* Kill Process:: Killing the child process
-* Process Information:: Additional process information
* Threads:: Debugging programs with multiple threads
* Processes:: Debugging programs with multiple processes
reads the symbol table again (while trying to preserve your current
breakpoint settings).
-@node Process Information
-@section Additional process information
-
-@kindex /proc
-@cindex process image
-
-Some operating systems provide a facility called @samp{/proc} that can
-be used to examine the image of a running process using file-system
-subroutines. If @value{GDBN} is configured for an operating system with this
-facility, the command @code{info proc} is available to report on several
-kinds of information about the process running your program.
-@code{info proc} works only on SVR4 systems that support @code{procfs}.
-This includes OSF/1 (Digital Unix), Solaris, Irix, and Unixware,
-but not HP-UX or Linux, for example.
-
-@table @code
-@kindex info proc
-@item info proc
-Summarize available information about the process.
-
-@kindex info proc mappings
-@item info proc mappings
-Report on the address ranges accessible in the program, with information
-on whether your program may read, write, or execute each range.
-
-@kindex info proc times
-@item info proc times
-Starting time, user CPU time, and system CPU time for your program and
-its children.
-
-@kindex info proc id
-@item info proc id
-Report on the process IDs related to your program: its own process ID,
-the ID of its parent, the process group ID, and the session ID.
-
-@kindex info proc status
-@item info proc status
-General information on the state of the process. If the process is
-stopped, this report includes the reason for stopping, and any signal
-received.
-
-@item info proc all
-Show all the above information about the process.
-@end table
-
@node Threads
@section Debugging programs with multiple threads
* Backtrace:: Backtraces
* Selection:: Selecting a frame
* Frame Info:: Information on a frame
-* Alpha/MIPS Stack:: Alpha and MIPS machines and the function stack
@end menu
@end table
-@node Alpha/MIPS Stack
-@section MIPS/Alpha machines and the function stack
-
-@cindex stack on Alpha
-@cindex stack on MIPS
-@cindex Alpha stack
-@cindex MIPS stack
-Alpha- and MIPS-based computers use an unusual stack frame, which
-sometimes requires @value{GDBN} to search backward in the object code to
-find the beginning of a function.
-
-@cindex response time, MIPS debugging
-To improve response time (especially for embedded applications, where
-@value{GDBN} may be restricted to a slow serial line for this search)
-you may want to limit the size of this search, using one of these
-commands:
-
-@table @code
-@cindex @code{heuristic-fence-post} (Alpha,MIPS)
-@item set heuristic-fence-post @var{limit}
-Restrict @value{GDBN} to examining at most @var{limit} bytes in its search
-for the beginning of a function. A value of @var{0} (the default)
-means there is no limit. However, except for @var{0}, the larger the
-limit the more bytes @code{heuristic-fence-post} must search and
-therefore the longer it takes to run.
-
-@item show heuristic-fence-post
-Display the current limit.
-@end table
-
-@noindent
-These commands are available @emph{only} when @value{GDBN} is configured
-for debugging programs on Alpha or MIPS processors.
-
@node Source
@chapter Examining Source Files
@value{GDBN} is unable to locate the saved registers, the selected stack
frame makes no difference.
-@table @code
-@kindex set rstack_high_address
-@cindex AMD 29K register stack
-@cindex register stack, AMD29K
-@item set rstack_high_address @var{address}
-On AMD 29000 family processors, registers are saved in a separate
-``register stack''. There is no way for @value{GDBN} to determine the extent
-of this stack. Normally, @value{GDBN} just assumes that the stack is ``large
-enough''. This may result in @value{GDBN} referencing memory locations that
-do not exist. If necessary, you can get around this problem by
-specifying the ending address of the register stack with the @code{set
-rstack_high_address} command. The argument should be an address, which
-you probably want to precede with @samp{0x} to specify in
-hexadecimal.
-
-@kindex show rstack_high_address
-@item show rstack_high_address
-Display the current limit of the register stack, on AMD 29000 family
-processors.
-@end table
-
@node Floating Point Hardware
@section Floating point hardware
@cindex floating point
@menu
* C:: C and C++
* Modula-2:: Modula-2
-* Chill:: Chill
+* Chill:: Chill
@end menu
@node C
of @value{GDBN} which support these topics.
@menu
-* How modes are displayed:: How modes are displayed
-* Locations:: Locations and their accesses
+* How modes are displayed:: How modes are displayed
+* Locations:: Locations and their accesses
* Values and their Operations:: Values and their Operations
* Chill type and range checks::
* Chill defaults::
@kindex target sim
@item target sim
-CPU simulator. @xref{Simulator,,Simulated CPU Target}.
+Builtin CPU simulator. GDB includes simulators for most architectures.
+In general,
+@example
+ target sim
+ load
+ run
+@end example
+works; however, you cannot assume that a specific memory map, device
+drivers, or even basic I/O is available, although some simulator do
+provide these. For info about any processor-specific simulator details,
+see the appropriate section in @ref{Embedded Processors, ,Embedded
+Processors}.
+
@end table
-The following targets are all CPU-specific, and only available for
-specific configurations.
-@c should organize by CPU
+Some configurations may include these targets as well:
@table @code
-@kindex target abug
-@item target abug @var{dev}
-ABug ROM monitor for M68K.
-
-@kindex target adapt
-@item target adapt @var{dev}
-Adapt monitor for A29K.
-
-@kindex target amd-eb
-@item target amd-eb @var{dev} @var{speed} @var{PROG}
-@cindex AMD EB29K
-Remote PC-resident AMD EB29K board, attached over serial lines.
-@var{dev} is the serial device, as for @code{target remote};
-@var{speed} allows you to specify the linespeed; and @var{PROG} is the
-name of the program to be debugged, as it appears to DOS on the PC.
-@xref{EB29K Remote, ,The EBMON protocol for AMD29K}.
-
-@kindex target array
-@item target array @var{dev}
-Array Tech LSI33K RAID controller board.
-
-@kindex target bug
-@item target bug @var{dev}
-BUG monitor, running on a MVME187 (m88k) board.
-
-@kindex target cpu32bug
-@item target cpu32bug @var{dev}
-CPU32BUG monitor, running on a CPU32 (M68K) board.
-
-@kindex target dbug
-@item target dbug @var{dev}
-dBUG ROM monitor for Motorola ColdFire.
-
-@kindex target ddb
-@item target ddb @var{dev}
-NEC's DDB monitor for Mips Vr4300.
-
-@kindex target dink32
-@item target dink32 @var{dev}
-DINK32 ROM monitor for PowerPC.
-
-@kindex target e7000
-@item target e7000 @var{dev}
-E7000 emulator for Hitachi H8 and SH.
-
-@kindex target es1800
-@item target es1800 @var{dev}
-ES-1800 emulator for M68K.
-
-@kindex target est
-@item target est @var{dev}
-EST-300 ICE monitor, running on a CPU32 (M68K) board.
-
-@kindex target hms
-@item target hms @var{dev}
-A Hitachi SH, H8/300, or H8/500 board, attached via serial line to your host.
-Use special commands @code{device} and @code{speed} to control the serial
-line and the communications speed used.
-@xref{Hitachi Remote,,@value{GDBN} and Hitachi Microprocessors}.
-
-@kindex target lsi
-@item target lsi @var{dev}
-LSI ROM monitor for Mips.
-
-@kindex target m32r
-@item target m32r @var{dev}
-Mitsubishi M32R/D ROM monitor.
-
-@kindex target mips
-@item target mips @var{dev}
-IDT/SIM ROM monitor for Mips.
-
-@kindex target mon960
-@item target mon960 @var{dev}
-MON960 monitor for Intel i960.
-
-@kindex target nindy
-@item target nindy @var{devicename}
-An Intel 960 board controlled by a Nindy Monitor. @var{devicename} is
-the name of the serial device to use for the connection, e.g.
-@file{/dev/ttya}. @xref{i960-Nindy Remote, ,@value{GDBN} with a remote i960 (Nindy)}.
-
@kindex target nrom
@item target nrom @var{dev}
NetROM ROM emulator. This target only supports downloading.
-@kindex target op50n
-@item target op50n @var{dev}
-OP50N monitor, running on an OKI HPPA board.
-
-@kindex target pmon
-@item target pmon @var{dev}
-PMON ROM monitor for Mips.
-
-@kindex target ppcbug
-@item target ppcbug @var{dev}
-@kindex target ppcbug1
-@item target ppcbug1 @var{dev}
-PPCBUG ROM monitor for PowerPC.
-
-@kindex target r3900
-@item target r3900 @var{dev}
-Densan DVE-R3900 ROM monitor for Toshiba R3900 Mips.
-
-@kindex target rdi
-@item target rdi @var{dev}
-ARM Angel monitor, via RDI library interface.
-
-@kindex target rdp
-@item target rdp @var{dev}
-ARM Demon monitor.
-
-@kindex target rom68k
-@item target rom68k @var{dev}
-ROM 68K monitor, running on an M68K IDP board.
-
-@kindex target rombug
-@item target rombug @var{dev}
-ROMBUG ROM monitor for OS/9000.
-
-@kindex target sds
-@item target sds @var{dev}
-SDS monitor, running on a PowerPC board (such as Motorola's ADS).
-
-@kindex target sparclite
-@item target sparclite @var{dev}
-Fujitsu sparclite boards, used only for the purpose of loading.
-You must use an additional command to debug the program.
-For example: target remote @var{dev} using @value{GDBN} standard
-remote protocol.
-
-@kindex target sh3
-@kindex target sh3e
-@item target sh3 @var{dev}
-@item target sh3e @var{dev}
-Hitachi SH-3 and SH-3E target systems.
-
-@kindex target st2000
-@item target st2000 @var{dev} @var{speed}
-A Tandem ST2000 phone switch, running Tandem's STDBUG protocol. @var{dev}
-is the name of the device attached to the ST2000 serial line;
-@var{speed} is the communication line speed. The arguments are not used
-if @value{GDBN} is configured to connect to the ST2000 using TCP or Telnet.
-@xref{ST2000 Remote,,@value{GDBN} with a Tandem ST2000}.
-
-@kindex target udi
-@item target udi @var{keyword}
-Remote AMD29K target, using the AMD UDI protocol. The @var{keyword}
-argument specifies which 29K board or simulator to use. @xref{UDI29K
-Remote,,The UDI protocol for AMD29K}.
-
-@kindex target vxworks
-@item target vxworks @var{machinename}
-A VxWorks system, attached via TCP/IP. The argument @var{machinename}
-is the target system's machine name or IP address.
-@xref{VxWorks Remote, ,@value{GDBN} and VxWorks}.
-
-@kindex target w89k
-@item target w89k @var{dev}
-W89K monitor, running on a Winbond HPPA board.
-
@end table
Different targets are available on different configurations of @value{GDBN};
specifies a fixed address.
@c FIXME! This would be a good place for an xref to the GNU linker doc.
-On VxWorks, @code{load} links @var{filename} dynamically on the
-current target system as well as adding its symbols in @value{GDBN}.
-
-@cindex download to Nindy-960
-With the Nindy interface to an Intel 960 board, @code{load}
-downloads @var{filename} to the 960 as well as adding its symbols in
-@value{GDBN}.
-
-@cindex download to H8/300 or H8/500
-@cindex H8/300 or H8/500 download
-@cindex download to Hitachi SH
-@cindex Hitachi SH download
-When you select remote debugging to a Hitachi SH, H8/300, or H8/500 board
-(@pxref{Hitachi Remote,,@value{GDBN} and Hitachi Microprocessors}),
-the @code{load} command downloads your program to the Hitachi board and also
-opens it as the current executable target for @value{GDBN} on your host
-(like the @code{file} command).
-
@code{load} does not repeat if you press @key{RET} again after using it.
@end table
Other remote targets may be available in your
configuration of @value{GDBN}; use @code{help target} to list them.
-@c Text on starting up GDB in various specific cases; it goes up front
-@c in manuals configured for any of those particular situations, here
-@c otherwise.
@menu
* Remote Serial:: @value{GDBN} remote serial protocol
-* i960-Nindy Remote:: @value{GDBN} with a remote i960 (Nindy)
-* UDI29K Remote:: The UDI protocol for AMD29K
-* EB29K Remote:: The EBMON protocol for AMD29K
-* VxWorks Remote:: @value{GDBN} and VxWorks
-* ST2000 Remote:: @value{GDBN} with a Tandem ST2000
-* Hitachi Remote:: @value{GDBN} and Hitachi Microprocessors
-* MIPS Remote:: @value{GDBN} and MIPS boards
-* Sparclet Remote:: @value{GDBN} and Sparclet boards
-* Simulator:: Simulated CPU target
@end menu
-@include remote.texi
+@node Remote Serial
+@subsection The @value{GDBN} remote serial protocol
+@cindex remote serial debugging, overview
+To debug a program running on another machine (the debugging
+@dfn{target} machine), you must first arrange for all the usual
+prerequisites for the program to run by itself. For example, for a C
+program, you need:
-@node KOD
-@section Kernel Object Display
-@cindex kernel object display
-@cindex kernel object
-@cindex KOD
+@enumerate
+@item
+A startup routine to set up the C runtime environment; these usually
+have a name like @file{crt0}. The startup routine may be supplied by
+your hardware supplier, or you may have to write your own.
-Some targets support kernel object display. Using this facility,
-@value{GDBN} communicates specially with the underlying operating system
-and can display information about operating system-level objects such as
-mutexes and other synchronization objects. Exactly which objects can be
-displayed is determined on a per-OS basis.
+@item
+You probably need a C subroutine library to support your program's
+subroutine calls, notably managing input and output.
-Use the @code{set os} command to set the operating system. This tells
-@value{GDBN} which kernel object display module to initialize:
+@item
+A way of getting your program to the other machine---for example, a
+download program. These are often supplied by the hardware
+manufacturer, but you may have to write your own from hardware
+documentation.
+@end enumerate
-@example
-(gdb) set os cisco
-@end example
+The next step is to arrange for your program to use a serial port to
+communicate with the machine where @value{GDBN} is running (the @dfn{host}
+machine). In general terms, the scheme looks like this:
-If @code{set os} succeeds, @value{GDBN} will display some information
-about the operating system, and will create a new @code{info} command
-which can be used to query the target. The @code{info} command is named
-after the operating system:
+@table @emph
+@item On the host,
+@value{GDBN} already understands how to use this protocol; when everything
+else is set up, you can simply use the @samp{target remote} command
+(@pxref{Targets,,Specifying a Debugging Target}).
+
+@item On the target,
+you must link with your program a few special-purpose subroutines that
+implement the @value{GDBN} remote serial protocol. The file containing these
+subroutines is called a @dfn{debugging stub}.
+
+On certain remote targets, you can use an auxiliary program
+@code{gdbserver} instead of linking a stub into your program.
+@xref{Server,,Using the @code{gdbserver} program}, for details.
+@end table
-@example
-(gdb) info cisco
-List of Cisco Kernel Objects
-Object Description
-any Any and all objects
-@end example
+The debugging stub is specific to the architecture of the remote
+machine; for example, use @file{sparc-stub.c} to debug programs on
+@sc{sparc} boards.
-Further subcommands can be used to query about particular objects known
-by the kernel.
+@cindex remote serial stub list
+These working remote stubs are distributed with @value{GDBN}:
-There is currently no way to determine whether a given operating system
+@table @code
+
+@item i386-stub.c
+@kindex i386-stub.c
+@cindex Intel
+@cindex i386
+For Intel 386 and compatible architectures.
+
+@item m68k-stub.c
+@kindex m68k-stub.c
+@cindex Motorola 680x0
+@cindex m680x0
+For Motorola 680x0 architectures.
+
+@item sh-stub.c
+@kindex sh-stub.c
+@cindex Hitachi
+@cindex SH
+For Hitachi SH architectures.
+
+@item sparc-stub.c
+@kindex sparc-stub.c
+@cindex Sparc
+For @sc{sparc} architectures.
+
+@item sparcl-stub.c
+@kindex sparcl-stub.c
+@cindex Fujitsu
+@cindex SparcLite
+For Fujitsu @sc{sparclite} architectures.
+
+@end table
+
+The @file{README} file in the @value{GDBN} distribution may list other
+recently added stubs.
+
+@menu
+* Stub Contents:: What the stub can do for you
+* Bootstrapping:: What you must do for the stub
+* Debug Session:: Putting it all together
+* Protocol:: Definition of the communication protocol
+* Server:: Using the `gdbserver' program
+* NetWare:: Using the `gdbserve.nlm' program
+@end menu
+
+@node Stub Contents
+@subsubsection What the stub can do for you
+
+@cindex remote serial stub
+The debugging stub for your architecture supplies these three
+subroutines:
+
+@table @code
+@item set_debug_traps
+@kindex set_debug_traps
+@cindex remote serial stub, initialization
+This routine arranges for @code{handle_exception} to run when your
+program stops. You must call this subroutine explicitly near the
+beginning of your program.
+
+@item handle_exception
+@kindex handle_exception
+@cindex remote serial stub, main routine
+This is the central workhorse, but your program never calls it
+explicitly---the setup code arranges for @code{handle_exception} to
+run when a trap is triggered.
+
+@code{handle_exception} takes control when your program stops during
+execution (for example, on a breakpoint), and mediates communications
+with @value{GDBN} on the host machine. This is where the communications
+protocol is implemented; @code{handle_exception} acts as the @value{GDBN}
+representative on the target machine; it begins by sending summary
+information on the state of your program, then continues to execute,
+retrieving and transmitting any information @value{GDBN} needs, until you
+execute a @value{GDBN} command that makes your program resume; at that point,
+@code{handle_exception} returns control to your own code on the target
+machine.
+
+@item breakpoint
+@cindex @code{breakpoint} subroutine, remote
+Use this auxiliary subroutine to make your program contain a
+breakpoint. Depending on the particular situation, this may be the only
+way for @value{GDBN} to get control. For instance, if your target
+machine has some sort of interrupt button, you won't need to call this;
+pressing the interrupt button transfers control to
+@code{handle_exception}---in effect, to @value{GDBN}. On some machines,
+simply receiving characters on the serial port may also trigger a trap;
+again, in that situation, you don't need to call @code{breakpoint} from
+your own program---simply running @samp{target remote} from the host
+@value{GDBN} session gets control.
+
+Call @code{breakpoint} if none of these is true, or if you simply want
+to make certain your program stops at a predetermined point for the
+start of your debugging session.
+@end table
+
+@node Bootstrapping
+@subsubsection What you must do for the stub
+
+@cindex remote stub, support routines
+The debugging stubs that come with @value{GDBN} are set up for a particular
+chip architecture, but they have no information about the rest of your
+debugging target machine.
+
+First of all you need to tell the stub how to communicate with the
+serial port.
+
+@table @code
+@item int getDebugChar()
+@kindex getDebugChar
+Write this subroutine to read a single character from the serial port.
+It may be identical to @code{getchar} for your target system; a
+different name is used to allow you to distinguish the two if you wish.
+
+@item void putDebugChar(int)
+@kindex putDebugChar
+Write this subroutine to write a single character to the serial port.
+It may be identical to @code{putchar} for your target system; a
+different name is used to allow you to distinguish the two if you wish.
+@end table
+
+@cindex control C, and remote debugging
+@cindex interrupting remote targets
+If you want @value{GDBN} to be able to stop your program while it is
+running, you need to use an interrupt-driven serial driver, and arrange
+for it to stop when it receives a @code{^C} (@samp{\003}, the control-C
+character). That is the character which @value{GDBN} uses to tell the
+remote system to stop.
+
+Getting the debugging target to return the proper status to @value{GDBN}
+probably requires changes to the standard stub; one quick and dirty way
+is to just execute a breakpoint instruction (the ``dirty'' part is that
+@value{GDBN} reports a @code{SIGTRAP} instead of a @code{SIGINT}).
+
+Other routines you need to supply are:
+
+@table @code
+@item void exceptionHandler (int @var{exception_number}, void *@var{exception_address})
+@kindex exceptionHandler
+Write this function to install @var{exception_address} in the exception
+handling tables. You need to do this because the stub does not have any
+way of knowing what the exception handling tables on your target system
+are like (for example, the processor's table might be in @sc{rom},
+containing entries which point to a table in @sc{ram}).
+@var{exception_number} is the exception number which should be changed;
+its meaning is architecture-dependent (for example, different numbers
+might represent divide by zero, misaligned access, etc). When this
+exception occurs, control should be transferred directly to
+@var{exception_address}, and the processor state (stack, registers,
+and so on) should be just as it is when a processor exception occurs. So if
+you want to use a jump instruction to reach @var{exception_address}, it
+should be a simple jump, not a jump to subroutine.
+
+For the 386, @var{exception_address} should be installed as an interrupt
+gate so that interrupts are masked while the handler runs. The gate
+should be at privilege level 0 (the most privileged level). The
+@sc{sparc} and 68k stubs are able to mask interrupts themselves without
+help from @code{exceptionHandler}.
+
+@item void flush_i_cache()
+@kindex flush_i_cache
+(sparc and sparclite only) Write this subroutine to flush the
+instruction cache, if any, on your target machine. If there is no
+instruction cache, this subroutine may be a no-op.
+
+On target machines that have instruction caches, @value{GDBN} requires this
+function to make certain that the state of your program is stable.
+@end table
+
+@noindent
+You must also make sure this library routine is available:
+
+@table @code
+@item void *memset(void *, int, int)
+@kindex memset
+This is the standard library function @code{memset} that sets an area of
+memory to a known value. If you have one of the free versions of
+@code{libc.a}, @code{memset} can be found there; otherwise, you must
+either obtain it from your hardware manufacturer, or write your own.
+@end table
+
+If you do not use the GNU C compiler, you may need other standard
+library subroutines as well; this varies from one stub to another,
+but in general the stubs are likely to use any of the common library
+subroutines which @code{gcc} generates as inline code.
+
+
+@node Debug Session
+@subsubsection Putting it all together
+
+@cindex remote serial debugging summary
+In summary, when your program is ready to debug, you must follow these
+steps.
+
+@enumerate
+@item
+Make sure you have the supporting low-level routines
+(@pxref{Bootstrapping,,What you must do for the stub}):
+@display
+@code{getDebugChar}, @code{putDebugChar},
+@code{flush_i_cache}, @code{memset}, @code{exceptionHandler}.
+@end display
+
+@item
+Insert these lines near the top of your program:
+
+@example
+set_debug_traps();
+breakpoint();
+@end example
+
+@item
+For the 680x0 stub only, you need to provide a variable called
+@code{exceptionHook}. Normally you just use:
+
+@example
+void (*exceptionHook)() = 0;
+@end example
+
+but if before calling @code{set_debug_traps}, you set it to point to a
+function in your program, that function is called when
+@code{@value{GDBN}} continues after stopping on a trap (for example, bus
+error). The function indicated by @code{exceptionHook} is called with
+one parameter: an @code{int} which is the exception number.
+
+@item
+Compile and link together: your program, the @value{GDBN} debugging stub for
+your target architecture, and the supporting subroutines.
+
+@item
+Make sure you have a serial connection between your target machine and
+the @value{GDBN} host, and identify the serial port on the host.
+
+@item
+@c The "remote" target now provides a `load' command, so we should
+@c document that. FIXME.
+Download your program to your target machine (or get it there by
+whatever means the manufacturer provides), and start it.
+
+@item
+To start remote debugging, run @value{GDBN} on the host machine, and specify
+as an executable file the program that is running in the remote machine.
+This tells @value{GDBN} how to find your program's symbols and the contents
+of its pure text.
+
+@cindex serial line, @code{target remote}
+Then establish communication using the @code{target remote} command.
+Its argument specifies how to communicate with the target
+machine---either via a devicename attached to a direct serial line, or a
+TCP port (usually to a terminal server which in turn has a serial line
+to the target). For example, to use a serial line connected to the
+device named @file{/dev/ttyb}:
+
+@example
+target remote /dev/ttyb
+@end example
+
+@cindex TCP port, @code{target remote}
+To use a TCP connection, use an argument of the form
+@code{@var{host}:port}. For example, to connect to port 2828 on a
+terminal server named @code{manyfarms}:
+
+@example
+target remote manyfarms:2828
+@end example
+@end enumerate
+
+Now you can use all the usual commands to examine and change data and to
+step and continue the remote program.
+
+To resume the remote program and stop debugging it, use the @code{detach}
+command.
+
+@cindex interrupting remote programs
+@cindex remote programs, interrupting
+Whenever @value{GDBN} is waiting for the remote program, if you type the
+interrupt character (often @key{C-C}), @value{GDBN} attempts to stop the
+program. This may or may not succeed, depending in part on the hardware
+and the serial drivers the remote system uses. If you type the
+interrupt character once again, @value{GDBN} displays this prompt:
+
+@example
+Interrupted while waiting for the program.
+Give up (and stop debugging it)? (y or n)
+@end example
+
+If you type @kbd{y}, @value{GDBN} abandons the remote debugging session.
+(If you decide you want to try again later, you can use @samp{target
+remote} again to connect once more.) If you type @kbd{n}, @value{GDBN}
+goes back to waiting.
+
+@node Protocol
+@subsubsection Communication protocol
+
+@cindex debugging stub, example
+@cindex remote stub, example
+@cindex stub example, remote debugging
+The stub files provided with @value{GDBN} implement the target side of the
+communication protocol, and the @value{GDBN} side is implemented in the
+@value{GDBN} source file @file{remote.c}. Normally, you can simply allow
+these subroutines to communicate, and ignore the details. (If you're
+implementing your own stub file, you can still ignore the details: start
+with one of the existing stub files. @file{sparc-stub.c} is the best
+organized, and therefore the easiest to read.)
+
+However, there may be occasions when you need to know something about
+the protocol---for example, if there is only one serial port to your
+target machine, you might want your program to do something special if
+it recognizes a packet meant for @value{GDBN}.
+
+In the examples below, @samp{<-} and @samp{->} are used to indicate
+transmitted and received data respectfully.
+
+@cindex protocol, @value{GDBN} remote serial
+@cindex serial protocol, @value{GDBN} remote
+@cindex remote serial protocol
+All @value{GDBN} commands and responses (other than acknowledgments)
+are sent as a @var{packet}. A @var{packet} is introduced with the
+character @samp{$}, this is followed by an optional two-digit
+@var{sequence-id} and the character @samp{:}, the actual
+@var{packet-data}, and the terminating character @samp{#} followed by a
+two-digit @var{checksum}:
+
+@example
+@code{$}@var{packet-data}@code{#}@var{checksum}
+@end example
+@noindent
+or, with the optional @var{sequence-id}:
+@example
+@code{$}@var{sequence-id}@code{:}@var{packet-data}@code{#}@var{checksum}
+@end example
+
+@cindex checksum, for @value{GDBN} remote
+@noindent
+The two-digit @var{checksum} is computed as the modulo 256 sum of all
+characters between the leading @samp{$} and the trailing @samp{#} (that
+consisting of both the optional @var{sequence-id}@code{:} and the actual
+@var{packet-data}).
+
+@cindex sequence-id, for @value{GDBN} remote
+@noindent
+The two-digit @var{sequence-id}, when present, is returned with the
+acknowledgment. Beyond that its meaning is poorly defined.
+@value{GDBN} is not known to output @var{sequence-id}s.
+
+When either the host or the target machine receives a packet, the first
+response expected is an acknowledgment: either @samp{+} (to indicate
+the package was received correctly) or @samp{-} (to request
+retransmission):
+
+@example
+<- @code{$}@var{packet-data}@code{#}@var{checksum}
+-> @code{+}
+@end example
+@noindent
+If the received packet included a @var{sequence-id} than that is
+appended to a positive acknowledgment:
+
+@example
+<- @code{$}@var{sequence-id}@code{:}@var{packet-data}@code{#}@var{checksum}
+-> @code{+}@var{sequence-id}
+@end example
+
+The host (@value{GDBN}) sends @var{command}s, and the target (the
+debugging stub incorporated in your program) sends a @var{response}. In
+the case of step and continue @var{command}s, the response is only sent
+when the operation has completed (the target has again stopped).
+
+@var{packet-data} consists of a sequence of characters with the
+exception of @samp{#} and @samp{$} (see @samp{X} packet for an
+exception). @samp{:} can not appear as the third character in a packet.
+Fields within the packet should be separated using @samp{,} and @samp{;}
+(unfortunately some packets chose to use @samp{:}). Except where
+otherwise noted all numbers are represented in HEX with leading zeros
+suppressed.
+
+Response @var{data} can be run-length encoded to save space. A @samp{*}
+means that the next character is an ASCII encoding giving a repeat count
+which stands for that many repetitions of the character preceding the
+@samp{*}. The encoding is @code{n+29}, yielding a printable character
+where @code{n >=3} (which is where rle starts to win). Don't use an
+@code{n > 126}.
+
+So:
+@example
+"@code{0* }"
+@end example
+@noindent
+means the same as "0000".
+
+The error response, returned for some packets includes a two character
+error number. That number is not well defined.
+
+For any @var{command} not supported by the stub, an empty response
+(@samp{$#00}) should be returned. That way it is possible to extend the
+protocol. A newer @value{GDBN} can tell if a packet is supported based
+on the response.
+
+Below is a complete list of all currently defined @var{command}s and
+their corresponding response @var{data}:
+
+@multitable @columnfractions .30 .30 .40
+@item Packet
+@tab Request
+@tab Description
+
+@item extended ops @emph{(optional)}
+@tab @code{!}
+@tab
+Use the extended remote protocol. Sticky -- only needs to be set once.
+The extended remote protocol support the @samp{R} packet.
+@item
+@tab reply @samp{}
+@tab
+Stubs that support the extended remote protocol return @samp{} which,
+unfortunately, is identical to the response returned by stubs that do not
+support protocol extensions.
+
+@item last signal
+@tab @code{?}
+@tab
+Reply the current reason for stopping. This is the same reply as is
+generated for step or cont : @code{S}@var{AA} where @var{AA} is the
+signal number.
+
+@item reserved
+@tab @code{a}
+@tab Reserved for future use
+
+@item set program arguments @strong{(reserved)} @emph{(optional)}
+@tab @code{A}@var{arglen}@code{,}@var{argnum}@code{,}@var{arg}@code{,...}
+@tab
+Initialized @samp{argv[]} array passed into program. @var{arglen}
+specifies the number of bytes in the hex encoded byte stream @var{arg}.
+@item
+@tab reply @code{OK}
+@item
+@tab reply @code{E}@var{NN}
+
+@item set baud @strong{(deprecated)}
+@tab @code{b}@var{baud}
+@tab
+Change the serial line speed to @var{baud}. JTC: @emph{When does the
+transport layer state change? When it's received, or after the ACK is
+transmitted. In either case, there are problems if the command or the
+acknowledgment packet is dropped.} Stan: @emph{If people really wanted
+to add something like this, and get it working for the first time, they
+ought to modify ser-unix.c to send some kind of out-of-band message to a
+specially-setup stub and have the switch happen "in between" packets, so
+that from remote protocol's point of view, nothing actually
+happened.}
+
+@item set breakpoint @strong{(deprecated)}
+@tab @code{B}@var{addr},@var{mode}
+@tab
+Set (@var{mode} is @samp{S}) or clear (@var{mode} is @samp{C}) a
+breakpoint at @var{addr}. @emph{This has been replaced by the @samp{Z} and
+@samp{z} packets.}
+
+@item continue
+@tab @code{c}@var{addr}
+@tab
+@var{addr} is address to resume. If @var{addr} is omitted, resume at
+current address.
+@item
+@tab reply
+@tab see below
+
+@item continue with signal @emph{(optional)}
+@tab @code{C}@var{sig}@code{;}@var{addr}
+@tab
+Continue with signal @var{sig} (hex signal number). If
+@code{;}@var{addr} is omitted, resume at same address.
+@item
+@tab reply
+@tab see below
+
+@item toggle debug @emph{(optional)}
+@tab @code{d}
+@tab
+toggle debug flag (see 386 & 68k stubs)
+
+@item detach @emph{(optional)}
+@tab @code{D}
+@tab Reply OK.
+
+@item reserved
+@tab @code{e}
+@tab Reserved for future use
+
+@item reserved
+@tab @code{E}
+@tab Reserved for future use
+
+@item reserved
+@tab @code{f}
+@tab Reserved for future use
+
+@item reserved
+@tab @code{F}
+@tab Reserved for future use
+
+@item read registers
+@tab @code{g}
+@tab Read general registers.
+@item
+@tab reply @var{XX...}
+@tab
+Each byte of register data is described by two hex digits. The bytes
+with the register are transmitted in target byte order. The size of
+each register and their position within the @samp{g} @var{packet} is
+determined by the @var{REGISTER_RAW_SIZE} and @var{REGISTER_NAME}
+macros.
+@item
+@tab @code{E}@var{NN}
+@tab for an error.
+
+@item write regs
+@tab @code{G}@var{XX...}
+@tab
+See @samp{g} for a description of the @var{XX...} data.
+@item
+@tab reply @code{OK}
+@tab for success
+@item
+@tab reply @code{E}@var{NN}
+@tab for an error
+
+@item reserved
+@tab @code{h}
+@tab Reserved for future use
+
+@item set thread @emph{(optional)}
+@tab @code{H}@var{c}@var{t...}
+@tab
+Set thread for subsequent operations. @var{c} = @samp{c} for thread
+used in step and continue; @var{t...} can be -1 for all threads.
+@var{c} = @samp{g} for thread used in other operations. If zero, pick a
+thread, any thread.
+@item
+@tab reply @code{OK}
+@tab for success
+@item
+@tab reply @code{E}@var{NN}
+@tab for an error
+
+@item cycle step @strong{(draft)} @emph{(optional)}
+@tab @code{i}@var{addr}@code{,}@var{nnn}
+@tab
+Step the remote target by a single clock cycle. If @code{,}@var{nnn} is
+present, cycle step @var{nnn} cycles. If @var{addr} is present, cycle
+step starting at that address.
+
+@item signal then cycle step @strong{(reserved)} @emph{(optional)}
+@tab @code{I}
+@tab
+See @samp{i} and @samp{S} for likely syntax and semantics.
+
+@item reserved
+@tab @code{j}
+@tab Reserved for future use
+
+@item reserved
+@tab @code{J}
+@tab Reserved for future use
+
+@item kill request @emph{(optional)}
+@tab @code{k}
+@tab
+
+@item reserved
+@tab @code{l}
+@tab Reserved for future use
+
+@item reserved
+@tab @code{L}
+@tab Reserved for future use
+
+@item read memory
+@tab @code{m}@var{addr}@code{,}@var{length}
+@tab
+Read @var{length} bytes of memory starting at address @var{addr}.
+@item
+@tab reply @var{XX...}
+@tab
+@var{XX...} is mem contents. Can be fewer bytes than requested if able to
+read only part of the data.
+@item
+@tab reply @code{E}@var{NN}
+@tab @var{NN} is errno
+
+@item write mem
+@tab @code{M}@var{addr},@var{length}@code{:}@var{XX...}
+@tab
+Write @var{length} bytes of memory starting at address @var{addr}.
+@var{XX...} is the data.
+@item
+@tab reply @code{OK}
+@tab for success
+@item
+@tab reply @code{E}@var{NN}
+@tab
+for an error (this includes the case where only part of the data was
+written).
+
+@item reserved
+@tab @code{n}
+@tab Reserved for future use
+
+@item reserved
+@tab @code{N}
+@tab Reserved for future use
+
+@item reserved
+@tab @code{o}
+@tab Reserved for future use
+
+@item reserved
+@tab @code{O}
+@tab Reserved for future use
+
+@item read reg @strong{(reserved)}
+@tab @code{p}@var{n...}
+@tab
+See write register.
+@item
+@tab return @var{r....}
+@tab The hex encoded value of the register in target byte order.
+
+@item write reg @emph{(optional)}
+@tab @code{P}@var{n...}@code{=}@var{r...}
+@tab
+Write register @var{n...} with value @var{r...}, which contains two hex
+digits for each byte in the register (target byte order).
+@item
+@tab reply @code{OK}
+@tab for success
+@item
+@tab reply @code{E}@var{NN}
+@tab for an error
+
+@item general query @emph{(optional)}
+@tab @code{q}@var{query}
+@tab
+Request info about @var{query}. In general @value{GDBN} @var{query}'s
+have a leading upper case letter. Custom vendor queries should use a
+leading lower case letter and a company prefix, ex: @samp{qfsf.var}.
+@var{query} may optionally be followed by a @samp{,} or @samp{;}
+separated list. Stubs should ensure that they fully match any
+@var{query} name.
+@item
+@tab reply @code{XX...}
+@tab Hex encoded data from query. The reply can not be empty.
+@item
+@tab reply @code{E}@var{NN}
+@tab error reply
+@item
+@tab reply @samp{}
+@tab Indicating an unrecognized @var{query}.
+
+@item current thread
+@tab @code{q}@code{C}
+@tab Return the current thread id.
+@item
+@tab reply @code{QC}@var{pid}
+@tab
+Where @var{pid} is a HEX encoded 16 bit process id.
+@item
+@tab reply *
+@tab Any other reply implies the old pid.
+
+@item compute CRC of memory block
+@tab @code{q}@code{CRC:}@var{addr}@code{,}@var{length}
+@tab
+@item
+@tab reply @code{E}@var{NN}
+@tab An error (such as memory fault)
+@item
+@tab reply @code{C}@var{CRC32}
+@tab A 32 bit cyclic redundancy check of the specified memory region.
+
+@item query @var{LIST} or @var{threadLIST}
+@tab @code{q}@code{L}@var{startflag}@var{threadcount}@var{nextthread}
+@tab
+Obtain thread information from RTOS. @var{startflag} is one hex digit;
+@var{threadcount} is two hex digits; and @var{nextthread} is 16 hex
+digits.
+@item
+@tab reply *
+@tab
+See @code{remote.c:parse_threadlist_response()}.
+
+@item query sect offs
+@tab @code{q}@code{Offsets}
+@tab Get section offsets.
+@item
+@tab reply @code{Text=}@var{xxx}@code{;Data=}@var{yyy}@code{;Bss=}@var{zzz}
+
+@item thread info request
+@tab @code{q}@code{P}@var{mode}@var{threadid}
+@tab
+Returns information on @var{threadid}. Where: @var{mode} is a hex
+encoded 32 bit mode; @var{threadid} is a hex encoded 64 bit thread ID.
+@item
+@tab reply *
+@tab
+See @code{remote.c:remote_unpack_thread_info_response()}.
+
+@item remote command
+@tab @code{q}@code{Rcmd,}@var{COMMAND}
+@tab
+@var{COMMAND} (hex encoded) is passed to the local interpreter for
+execution. Invalid commands should be reported using the output string.
+Before the final result packet, the target may also respond with a
+number of intermediate @code{O}@var{OUTPUT} console output
+packets. @emph{Implementors should note that providing access to a
+stubs's interpreter may have security implications}.
+@item
+@tab reply @code{OK}
+@tab
+A command response with no output.
+@item
+@tab reply @var{OUTPUT}
+@tab
+A command response with the hex encoded output string @var{OUTPUT}.
+@item
+@tab reply @code{E}@var{NN}
+@tab
+Indicate a badly formed request.
+
+@item
+@tab reply @samp{}
+@tab
+When @samp{q}@samp{Rcmd} is not recognized.
+
+@item general set @emph{(optional)}
+@tab @code{Q}@var{var}@code{=}@var{val}
+@tab
+Set value of @var{var} to @var{val}. See @samp{q} for a discussing of
+naming conventions.
+
+@item reset @emph{(optional)}
+@tab r
+@tab reset -- see sparc stub.
+
+@item remote restart @emph{(optional)}
+@tab @code{R}@var{XX}
+@tab
+Restart the remote server. @var{XX} while needed has no clear
+definition.
+
+@item step @emph{(optional)}
+@tab @code{s}@var{addr}
+@tab
+@var{addr} is address to resume. If @var{addr} is omitted, resume at
+same address.
+@item
+@tab reply
+@tab see below
+
+@item step with signal @emph{(optional)}
+@tab @code{S}@var{sig}@code{;}@var{addr}
+@tab
+Like @samp{C} but step not continue.
+@item
+@tab reply
+@tab see below
+
+@item search @emph{(optional)}
+@tab @code{t}@var{addr}@code{:}@var{PP}@code{,}@var{MM}
+@tab
+Search backwards starting at address @var{addr} for a match with pattern
+@var{PP} and mask @var{MM}. @var{PP} and @var{MM} are 4
+bytes. @var{addr} must be at least 3 digits.
+
+@item thread alive @emph{(optional)}
+@tab @code{T}@var{XX}
+@tab Find out if the thread XX is alive.
+@item
+@tab reply @code{OK}
+@tab thread is still alive
+@item
+@tab reply @code{E}@var{NN}
+@tab thread is dead
+
+@item reserved
+@tab @code{u}
+@tab Reserved for future use
+
+@item reserved
+@tab @code{U}
+@tab Reserved for future use
+
+@item reserved
+@tab @code{v}
+@tab Reserved for future use
+
+@item reserved
+@tab @code{V}
+@tab Reserved for future use
+
+@item reserved
+@tab @code{w}
+@tab Reserved for future use
+
+@item reserved
+@tab @code{W}
+@tab Reserved for future use
+
+@item reserved
+@tab @code{x}
+@tab Reserved for future use
+
+@item write mem (binary) @emph{(optional)}
+@tab @code{X}@var{addr}@code{,}@var{length}@var{:}@var{XX...}
+@tab
+@var{addr} is address, @var{length} is number of bytes, @var{XX...} is
+binary data.
+@item
+@tab reply @code{OK}
+@tab for success
+@item
+@tab reply @code{E}@var{NN}
+@tab for an error
+
+@item reserved
+@tab @code{y}
+@tab Reserved for future use
+
+@item reserved
+@tab @code{Y}
+@tab Reserved for future use
+
+@item remove break or watchpoint @strong{(draft)} @emph{(optional)}
+@tab @code{z}@var{t}@code{,}@var{addr}@code{,}@var{length}
+@tab
+See @samp{Z}.
+
+@item insert break or watchpoint @strong{(draft)} @emph{(optional)}
+@tab @code{Z}@var{t}@code{,}@var{addr}@code{,}@var{length}
+@tab
+@var{t} is type: @samp{0} - software breakpoint, @samp{1} - hardware
+breakpoint, @samp{2} - write watchpoint, @samp{3} - read watchpoint,
+@samp{4} - access watchpoint; @var{addr} is address; @var{length} is in
+bytes. For a software breakpoint, @var{length} specifies the size of
+the instruction to be patched. For hardware breakpoints and watchpoints
+@var{length} specifies the memory region to be monitored.
+@item
+@tab reply @code{E}@var{NN}
+@tab for an error
+@item
+@tab reply @code{OK}
+@tab for success
+@item
+@tab @samp{}
+@tab If not supported.
+
+@item reserved
+@tab <other>
+@tab Reserved for future use
+
+@end multitable
+
+In the case of the @samp{C}, @samp{c}, @samp{S} and @samp{s} packets,
+there is no immediate response. The reply, described below, comes when
+the machine stops:
+
+@multitable @columnfractions .4 .6
+
+@item @code{S}@var{AA}
+@tab @var{AA} is the signal number
+
+@item @code{T}@var{AA}@var{n...}@code{:}@var{r...}@code{;}@var{n...}@code{:}@var{r...}@code{;}@var{n...}@code{:}@var{r...}@code{;}
+@tab
+@var{AA} = two hex digit signal number; @var{n...} = register number
+(hex), @var{r...} = target byte ordered register contents, size defined
+by @code{REGISTER_RAW_SIZE}; @var{n...} = @samp{thread}, @var{r...} =
+thread process ID, this is a hex integer; @var{n...} = other string not
+starting with valid hex digit. @value{GDBN} should ignore this
+@var{n...}, @var{r...} pair and go on to the next. This way we can
+extend the protocol.
+
+@item @code{W}@var{AA}
+@tab
+The process exited, and @var{AA} is the exit status. This is only
+applicable for certains sorts of targets.
+
+@item @code{X}@var{AA}
+@tab
+The process terminated with signal @var{AA}.
+
+@item @code{N}@var{AA}@code{;}@var{tttttttt}@code{;}@var{dddddddd}@code{;}@var{bbbbbbbb} @strong{(obsolete)}
+@tab
+@var{AA} = signal number; @var{tttttttt} = address of symbol "_start";
+@var{dddddddd} = base of data section; @var{bbbbbbbb} = base of bss
+section. @emph{Note: only used by Cisco Systems targets. The difference
+between this reply and the "qOffsets" query is that the 'N' packet may
+arrive spontaneously whereas the 'qOffsets' is a query initiated by the
+host debugger.}
+
+@item @code{O}@var{XX...}
+@tab
+@var{XX...} is hex encoding of ASCII data. This can happen at any time
+while the program is running and the debugger should continue to wait
+for 'W', 'T', etc.
+
+@end multitable
+
+Example sequence of a target being re-started. Notice how the restart
+does not get any direct output:
+
+@example
+<- @code{R00}
+-> @code{+}
+@emph{target restarts}
+<- @code{?}
+-> @code{+}
+-> @code{T001:1234123412341234}
+<- @code{+}
+@end example
+
+Example sequence of a target being stepped by a single instruction:
+
+@example
+<- @code{G1445...}
+-> @code{+}
+<- @code{s}
+-> @code{+}
+@emph{time passes}
+-> @code{T001:1234123412341234}
+<- @code{+}
+<- @code{g}
+-> @code{+}
+-> @code{1455...}
+<- @code{+}
+@end example
+
+@kindex set remotedebug
+@kindex show remotedebug
+@cindex packets, reporting on stdout
+@cindex serial connections, debugging
+If you have trouble with the serial connection, you can use the command
+@code{set remotedebug}. This makes @value{GDBN} report on all packets sent
+back and forth across the serial line to the remote machine. The
+packet-debugging information is printed on the @value{GDBN} standard output
+stream. @code{set remotedebug off} turns it off, and @code{show
+remotedebug} shows you its current state.
+
+@node Server
+@subsubsection Using the @code{gdbserver} program
+
+@kindex gdbserver
+@cindex remote connection without stubs
+@code{gdbserver} is a control program for Unix-like systems, which
+allows you to connect your program with a remote @value{GDBN} via
+@code{target remote}---but without linking in the usual debugging stub.
+
+@code{gdbserver} is not a complete replacement for the debugging stubs,
+because it requires essentially the same operating-system facilities
+that @value{GDBN} itself does. In fact, a system that can run
+@code{gdbserver} to connect to a remote @value{GDBN} could also run
+@value{GDBN} locally! @code{gdbserver} is sometimes useful nevertheless,
+because it is a much smaller program than @value{GDBN} itself. It is
+also easier to port than all of @value{GDBN}, so you may be able to get
+started more quickly on a new system by using @code{gdbserver}.
+Finally, if you develop code for real-time systems, you may find that
+the tradeoffs involved in real-time operation make it more convenient to
+do as much development work as possible on another system, for example
+by cross-compiling. You can use @code{gdbserver} to make a similar
+choice for debugging.
+
+@value{GDBN} and @code{gdbserver} communicate via either a serial line
+or a TCP connection, using the standard @value{GDBN} remote serial
+protocol.
+
+@table @emph
+@item On the target machine,
+you need to have a copy of the program you want to debug.
+@code{gdbserver} does not need your program's symbol table, so you can
+strip the program if necessary to save space. @value{GDBN} on the host
+system does all the symbol handling.
+
+To use the server, you must tell it how to communicate with @value{GDBN};
+the name of your program; and the arguments for your program. The
+syntax is:
+
+@smallexample
+target> gdbserver @var{comm} @var{program} [ @var{args} @dots{} ]
+@end smallexample
+
+@var{comm} is either a device name (to use a serial line) or a TCP
+hostname and portnumber. For example, to debug Emacs with the argument
+@samp{foo.txt} and communicate with @value{GDBN} over the serial port
+@file{/dev/com1}:
+
+@smallexample
+target> gdbserver /dev/com1 emacs foo.txt
+@end smallexample
+
+@code{gdbserver} waits passively for the host @value{GDBN} to communicate
+with it.
+
+To use a TCP connection instead of a serial line:
+
+@smallexample
+target> gdbserver host:2345 emacs foo.txt
+@end smallexample
+
+The only difference from the previous example is the first argument,
+specifying that you are communicating with the host @value{GDBN} via
+TCP. The @samp{host:2345} argument means that @code{gdbserver} is to
+expect a TCP connection from machine @samp{host} to local TCP port 2345.
+(Currently, the @samp{host} part is ignored.) You can choose any number
+you want for the port number as long as it does not conflict with any
+TCP ports already in use on the target system (for example, @code{23} is
+reserved for @code{telnet}).@footnote{If you choose a port number that
+conflicts with another service, @code{gdbserver} prints an error message
+and exits.} You must use the same port number with the host @value{GDBN}
+@code{target remote} command.
+
+@item On the @value{GDBN} host machine,
+you need an unstripped copy of your program, since @value{GDBN} needs
+symbols and debugging information. Start up @value{GDBN} as usual,
+using the name of the local copy of your program as the first argument.
+(You may also need the @w{@samp{--baud}} option if the serial line is
+running at anything other than 9600 bps.) After that, use @code{target
+remote} to establish communications with @code{gdbserver}. Its argument
+is either a device name (usually a serial device, like
+@file{/dev/ttyb}), or a TCP port descriptor in the form
+@code{@var{host}:@var{PORT}}. For example:
+
+@smallexample
+(@value{GDBP}) target remote /dev/ttyb
+@end smallexample
+
+@noindent
+communicates with the server via serial line @file{/dev/ttyb}, and
+
+@smallexample
+(@value{GDBP}) target remote the-target:2345
+@end smallexample
+
+@noindent
+communicates via a TCP connection to port 2345 on host @w{@file{the-target}}.
+For TCP connections, you must start up @code{gdbserver} prior to using
+the @code{target remote} command. Otherwise you may get an error whose
+text depends on the host system, but which usually looks something like
+@samp{Connection refused}.
+@end table
+
+@node NetWare
+@subsubsection Using the @code{gdbserve.nlm} program
+
+@kindex gdbserve.nlm
+@code{gdbserve.nlm} is a control program for NetWare systems, which
+allows you to connect your program with a remote @value{GDBN} via
+@code{target remote}.
+
+@value{GDBN} and @code{gdbserve.nlm} communicate via a serial line,
+using the standard @value{GDBN} remote serial protocol.
+
+@table @emph
+@item On the target machine,
+you need to have a copy of the program you want to debug.
+@code{gdbserve.nlm} does not need your program's symbol table, so you
+can strip the program if necessary to save space. @value{GDBN} on the
+host system does all the symbol handling.
+
+To use the server, you must tell it how to communicate with
+@value{GDBN}; the name of your program; and the arguments for your
+program. The syntax is:
+
+@smallexample
+load gdbserve [ BOARD=@var{board} ] [ PORT=@var{port} ]
+ [ BAUD=@var{baud} ] @var{program} [ @var{args} @dots{} ]
+@end smallexample
+
+@var{board} and @var{port} specify the serial line; @var{baud} specifies
+the baud rate used by the connection. @var{port} and @var{node} default
+to 0, @var{baud} defaults to 9600 bps.
+
+For example, to debug Emacs with the argument @samp{foo.txt}and
+communicate with @value{GDBN} over serial port number 2 or board 1
+using a 19200 bps connection:
+
+@smallexample
+load gdbserve BOARD=1 PORT=2 BAUD=19200 emacs foo.txt
+@end smallexample
+
+@item On the @value{GDBN} host machine,
+you need an unstripped copy of your program, since @value{GDBN} needs
+symbols and debugging information. Start up @value{GDBN} as usual,
+using the name of the local copy of your program as the first argument.
+(You may also need the @w{@samp{--baud}} option if the serial line is
+running at anything other than 9600 bps. After that, use @code{target
+remote} to establish communications with @code{gdbserve.nlm}. Its
+argument is a device name (usually a serial device, like
+@file{/dev/ttyb}). For example:
+
+@smallexample
+(@value{GDBP}) target remote /dev/ttyb
+@end smallexample
+
+@noindent
+communications with the server via serial line @file{/dev/ttyb}.
+@end table
+
+@node KOD
+@section Kernel Object Display
+
+@cindex kernel object display
+@cindex kernel object
+@cindex KOD
+
+Some targets support kernel object display. Using this facility,
+@value{GDBN} communicates specially with the underlying operating system
+and can display information about operating system-level objects such as
+mutexes and other synchronization objects. Exactly which objects can be
+displayed is determined on a per-OS basis.
+
+Use the @code{set os} command to set the operating system. This tells
+@value{GDBN} which kernel object display module to initialize:
+
+@example
+(gdb) set os cisco
+@end example
+
+If @code{set os} succeeds, @value{GDBN} will display some information
+about the operating system, and will create a new @code{info} command
+which can be used to query the target. The @code{info} command is named
+after the operating system:
+
+@example
+(gdb) info cisco
+List of Cisco Kernel Objects
+Object Description
+any Any and all objects
+@end example
+
+Further subcommands can be used to query about particular objects known
+by the kernel.
+
+There is currently no way to determine whether a given operating system
is supported other than to try it.
+@node Configurations
+@chapter Configuration-Specific Information
+
+While nearly all @value{GDBN} commands are available for all native and
+cross versions of the debugger, there are some exceptions. This chapter
+describes things that are only available in certain configurations.
+
+There are three major categories of configurations: native
+configurations, where the host and target are the same, embedded
+operating system configurations, which are usually the same for several
+different processor architectures, and bare embedded processors, which
+are quite different from each other.
+
+@menu
+* Native::
+* Embedded OS::
+* Embedded Processors::
+* Architectures::
+@end menu
+
+@node Native
+@section Native
+
+This section describes details specific to particular native
+configurations.
+
+@menu
+* HP-UX:: HP-UX
+* SVR4 Process Information:: SVR4 process information
+@end menu
+
+@node HP-UX
+@subsection HP-UX
+
+On HP-UX systems, if you refer to a function or variable name that
+begins with a dollar sign, @value{GDBN} searches for a user or system
+name first, before it searches for a convenience variable.
+
+@node SVR4 Process Information
+@subsection SVR4 process information
+
+@kindex /proc
+@cindex process image
+
+Many versions of SVR4 provide a facility called @samp{/proc} that can be
+used to examine the image of a running process using file-system
+subroutines. If @value{GDBN} is configured for an operating system with
+this facility, the command @code{info proc} is available to report on
+several kinds of information about the process running your program.
+@code{info proc} works only on SVR4 systems that include the
+@code{procfs} code. This includes OSF/1 (Digital Unix), Solaris, Irix,
+and Unixware, but not HP-UX or Linux, for example.
+
+@table @code
+@kindex info proc
+@item info proc
+Summarize available information about the process.
+
+@kindex info proc mappings
+@item info proc mappings
+Report on the address ranges accessible in the program, with information
+on whether your program may read, write, or execute each range.
+
+@kindex info proc times
+@item info proc times
+Starting time, user CPU time, and system CPU time for your program and
+its children.
+
+@kindex info proc id
+@item info proc id
+Report on the process IDs related to your program: its own process ID,
+the ID of its parent, the process group ID, and the session ID.
+
+@kindex info proc status
+@item info proc status
+General information on the state of the process. If the process is
+stopped, this report includes the reason for stopping, and any signal
+received.
+
+@item info proc all
+Show all the above information about the process.
+@end table
+
+@node Embedded OS
+@section Embedded Operating Systems
+
+This section describes configurations involving the debugging of
+embedded operating systems that are available for several different
+architectures.
+
+@menu
+* VxWorks:: Using @value{GDBN} with VxWorks
+@end menu
+
+@value{GDBN} includes the ability to debug programs running on
+various real-time operating systems.
+
+@node VxWorks
+@subsection Using @value{GDBN} with VxWorks
+
+@cindex VxWorks
+
+@table @code
+
+@kindex target vxworks
+@item target vxworks @var{machinename}
+A VxWorks system, attached via TCP/IP. The argument @var{machinename}
+is the target system's machine name or IP address.
+
+@end table
+
+On VxWorks, @code{load} links @var{filename} dynamically on the
+current target system as well as adding its symbols in @value{GDBN}.
+
+@value{GDBN} enables developers to spawn and debug tasks running on networked
+VxWorks targets from a Unix host. Already-running tasks spawned from
+the VxWorks shell can also be debugged. @value{GDBN} uses code that runs on
+both the Unix host and on the VxWorks target. The program
+@code{gdb} is installed and executed on the Unix host. (It may be
+installed with the name @code{vxgdb}, to distinguish it from a
+@value{GDBN} for debugging programs on the host itself.)
+
+@table @code
+@item VxWorks-timeout @var{args}
+@kindex vxworks-timeout
+All VxWorks-based targets now support the option @code{vxworks-timeout}.
+This option is set by the user, and @var{args} represents the number of
+seconds @value{GDBN} waits for responses to rpc's. You might use this if
+your VxWorks target is a slow software simulator or is on the far side
+of a thin network line.
+@end table
+
+The following information on connecting to VxWorks was current when
+this manual was produced; newer releases of VxWorks may use revised
+procedures.
+
+@kindex INCLUDE_RDB
+To use @value{GDBN} with VxWorks, you must rebuild your VxWorks kernel
+to include the remote debugging interface routines in the VxWorks
+library @file{rdb.a}. To do this, define @code{INCLUDE_RDB} in the
+VxWorks configuration file @file{configAll.h} and rebuild your VxWorks
+kernel. The resulting kernel contains @file{rdb.a}, and spawns the
+source debugging task @code{tRdbTask} when VxWorks is booted. For more
+information on configuring and remaking VxWorks, see the manufacturer's
+manual.
+@c VxWorks, see the @cite{VxWorks Programmer's Guide}.
+
+Once you have included @file{rdb.a} in your VxWorks system image and set
+your Unix execution search path to find @value{GDBN}, you are ready to
+run @value{GDBN}. From your Unix host, run @code{gdb} (or @code{vxgdb},
+depending on your installation).
+
+@value{GDBN} comes up showing the prompt:
+
+@example
+(vxgdb)
+@end example
+
+@menu
+* VxWorks Connection:: Connecting to VxWorks
+* VxWorks Download:: VxWorks download
+* VxWorks Attach:: Running tasks
+@end menu
+
+@node VxWorks Connection
+@subsubsection Connecting to VxWorks
+
+The @value{GDBN} command @code{target} lets you connect to a VxWorks target on the
+network. To connect to a target whose host name is ``@code{tt}'', type:
+
+@example
+(vxgdb) target vxworks tt
+@end example
+
+@need 750
+@value{GDBN} displays messages like these:
+
+@smallexample
+Attaching remote machine across net...
+Connected to tt.
+@end smallexample
+
+@need 1000
+@value{GDBN} then attempts to read the symbol tables of any object modules
+loaded into the VxWorks target since it was last booted. @value{GDBN} locates
+these files by searching the directories listed in the command search
+path (@pxref{Environment, ,Your program's environment}); if it fails
+to find an object file, it displays a message such as:
+
+@example
+prog.o: No such file or directory.
+@end example
+
+When this happens, add the appropriate directory to the search path with
+the @value{GDBN} command @code{path}, and execute the @code{target}
+command again.
+
+@node VxWorks Download
+@subsubsection VxWorks download
+
+@cindex download to VxWorks
+If you have connected to the VxWorks target and you want to debug an
+object that has not yet been loaded, you can use the @value{GDBN}
+@code{load} command to download a file from Unix to VxWorks
+incrementally. The object file given as an argument to the @code{load}
+command is actually opened twice: first by the VxWorks target in order
+to download the code, then by @value{GDBN} in order to read the symbol
+table. This can lead to problems if the current working directories on
+the two systems differ. If both systems have NFS mounted the same
+filesystems, you can avoid these problems by using absolute paths.
+Otherwise, it is simplest to set the working directory on both systems
+to the directory in which the object file resides, and then to reference
+the file by its name, without any path. For instance, a program
+@file{prog.o} may reside in @file{@var{vxpath}/vw/demo/rdb} in VxWorks
+and in @file{@var{hostpath}/vw/demo/rdb} on the host. To load this
+program, type this on VxWorks:
+
+@example
+-> cd "@var{vxpath}/vw/demo/rdb"
+@end example
+v
+Then, in @value{GDBN}, type:
+
+@example
+(vxgdb) cd @var{hostpath}/vw/demo/rdb
+(vxgdb) load prog.o
+@end example
+
+@value{GDBN} displays a response similar to this:
+
+@smallexample
+Reading symbol data from wherever/vw/demo/rdb/prog.o... done.
+@end smallexample
+
+You can also use the @code{load} command to reload an object module
+after editing and recompiling the corresponding source file. Note that
+this makes @value{GDBN} delete all currently-defined breakpoints,
+auto-displays, and convenience variables, and to clear the value
+history. (This is necessary in order to preserve the integrity of
+debugger data structures that reference the target system's symbol
+table.)
+
+@node VxWorks Attach
+@subsubsection Running tasks
+
+@cindex running VxWorks tasks
+You can also attach to an existing task using the @code{attach} command as
+follows:
+
+@example
+(vxgdb) attach @var{task}
+@end example
+
+@noindent
+where @var{task} is the VxWorks hexadecimal task ID. The task can be running
+or suspended when you attach to it. Running tasks are suspended at
+the time of attachment.
+
+@node Embedded Processors
+@section Embedded Processors
+
+This section goes into details specific to particular embedded
+configurations.
+
+@menu
+* A29K Embedded:: AMD A29K Embedded
+* ARM:: ARM
+* H8/300:: Hitachi H8/300
+* H8/500:: Hitachi H8/500
+* i960:: Intel i960
+* M32R/D:: Mitsubishi M32R/D
+* M68K:: Motorola M68K
+* M88K:: Motorola M88K
+* MIPS Embedded:: MIPS Embedded
+* PA:: HP PA Embedded
+* PowerPC: PowerPC
+* SH:: Hitachi SH
+* Sparclet:: Tsqware Sparclet
+* Sparclite:: Fujitsu Sparclite
+* ST2000:: Tandem ST2000
+* Z8000:: Zilog Z8000
+@end menu
+
+@node A29K Embedded
+@subsection AMD A29K Embedded
+
+@menu
+* A29K UDI::
+* A29K EB29K::
+* Comms (EB29K):: Communications setup
+* gdb-EB29K:: EB29K cross-debugging
+* Remote Log:: Remote log
+@end menu
+
+@table @code
+
+@kindex target adapt
+@item target adapt @var{dev}
+Adapt monitor for A29K.
+
+@kindex target amd-eb
+@item target amd-eb @var{dev} @var{speed} @var{PROG}
+@cindex AMD EB29K
+Remote PC-resident AMD EB29K board, attached over serial lines.
+@var{dev} is the serial device, as for @code{target remote};
+@var{speed} allows you to specify the linespeed; and @var{PROG} is the
+name of the program to be debugged, as it appears to DOS on the PC.
+@xref{A29K EB29K, ,EBMON protocol for AMD29K}.
+
+@end table
+
+@node A29K UDI
+@subsubsection A29K UDI
+
+@cindex UDI
+@cindex AMD29K via UDI
+
+@value{GDBN} supports AMD's UDI (``Universal Debugger Interface'')
+protocol for debugging the a29k processor family. To use this
+configuration with AMD targets running the MiniMON monitor, you need the
+program @code{MONTIP}, available from AMD at no charge. You can also
+use @value{GDBN} with the UDI-conformant a29k simulator program
+@code{ISSTIP}, also available from AMD.
+
+@table @code
+@item target udi @var{keyword}
+@kindex udi
+Select the UDI interface to a remote a29k board or simulator, where
+@var{keyword} is an entry in the AMD configuration file @file{udi_soc}.
+This file contains keyword entries which specify parameters used to
+connect to a29k targets. If the @file{udi_soc} file is not in your
+working directory, you must set the environment variable @samp{UDICONF}
+to its pathname.
+@end table
+
+@node A29K EB29K
+@subsubsection EBMON protocol for AMD29K
+
+@cindex EB29K board
+@cindex running 29K programs
+
+AMD distributes a 29K development board meant to fit in a PC, together
+with a DOS-hosted monitor program called @code{EBMON}. As a shorthand
+term, this development system is called the ``EB29K''. To use
+@value{GDBN} from a Unix system to run programs on the EB29K board, you
+must first connect a serial cable between the PC (which hosts the EB29K
+board) and a serial port on the Unix system. In the following, we
+assume you've hooked the cable between the PC's @file{COM1} port and
+@file{/dev/ttya} on the Unix system.
+
+@node Comms (EB29K)
+@subsubsection Communications setup
+
+The next step is to set up the PC's port, by doing something like this
+in DOS on the PC:
+
+@example
+C:\> MODE com1:9600,n,8,1,none
+@end example
+
+@noindent
+This example---run on an MS DOS 4.0 system---sets the PC port to 9600
+bps, no parity, eight data bits, one stop bit, and no ``retry'' action;
+you must match the communications parameters when establishing the Unix
+end of the connection as well.
+@c FIXME: Who knows what this "no retry action" crud from the DOS manual may
+@c mean? It's optional; leave it out? ---doc@cygnus.com, 25feb91
+
+To give control of the PC to the Unix side of the serial line, type
+the following at the DOS console:
+
+@example
+C:\> CTTY com1
+@end example
+
+@noindent
+(Later, if you wish to return control to the DOS console, you can use
+the command @code{CTTY con}---but you must send it over the device that
+had control, in our example over the @file{COM1} serial line).
+
+From the Unix host, use a communications program such as @code{tip} or
+@code{cu} to communicate with the PC; for example,
+
+@example
+cu -s 9600 -l /dev/ttya
+@end example
+
+@noindent
+The @code{cu} options shown specify, respectively, the linespeed and the
+serial port to use. If you use @code{tip} instead, your command line
+may look something like the following:
+
+@example
+tip -9600 /dev/ttya
+@end example
+
+@noindent
+Your system may require a different name where we show
+@file{/dev/ttya} as the argument to @code{tip}. The communications
+parameters, including which port to use, are associated with the
+@code{tip} argument in the ``remote'' descriptions file---normally the
+system table @file{/etc/remote}.
+@c FIXME: What if anything needs doing to match the "n,8,1,none" part of
+@c the DOS side's comms setup? cu can support -o (odd
+@c parity), -e (even parity)---apparently no settings for no parity or
+@c for character size. Taken from stty maybe...? John points out tip
+@c can set these as internal variables, eg ~s parity=none; man stty
+@c suggests that it *might* work to stty these options with stdin or
+@c stdout redirected... ---doc@cygnus.com, 25feb91
+
+@kindex EBMON
+Using the @code{tip} or @code{cu} connection, change the DOS working
+directory to the directory containing a copy of your 29K program, then
+start the PC program @code{EBMON} (an EB29K control program supplied
+with your board by AMD). You should see an initial display from
+@code{EBMON} similar to the one that follows, ending with the
+@code{EBMON} prompt @samp{#}---
+
+@example
+C:\> G:
+
+G:\> CD \usr\joe\work29k
+
+G:\USR\JOE\WORK29K> EBMON
+Am29000 PC Coprocessor Board Monitor, version 3.0-18
+Copyright 1990 Advanced Micro Devices, Inc.
+Written by Gibbons and Associates, Inc.
+
+Enter '?' or 'H' for help
+
+PC Coprocessor Type = EB29K
+I/O Base = 0x208
+Memory Base = 0xd0000
+
+Data Memory Size = 2048KB
+Available I-RAM Range = 0x8000 to 0x1fffff
+Available D-RAM Range = 0x80002000 to 0x801fffff
+
+PageSize = 0x400
+Register Stack Size = 0x800
+Memory Stack Size = 0x1800
+
+CPU PRL = 0x3
+Am29027 Available = No
+Byte Write Available = Yes
+
+# ~.
+@end example
+
+Then exit the @code{cu} or @code{tip} program (done in the example by
+typing @code{~.} at the @code{EBMON} prompt). @code{EBMON} keeps
+running, ready for @value{GDBN} to take over.
+
+For this example, we've assumed what is probably the most convenient
+way to make sure the same 29K program is on both the PC and the Unix
+system: a PC/NFS connection that establishes ``drive @code{G:}'' on the
+PC as a file system on the Unix host. If you do not have PC/NFS or
+something similar connecting the two systems, you must arrange some
+other way---perhaps floppy-disk transfer---of getting the 29K program
+from the Unix system to the PC; @value{GDBN} does @emph{not} download it over the
+serial line.
+
+@node gdb-EB29K
+@subsubsection EB29K cross-debugging
+
+Finally, @code{cd} to the directory containing an image of your 29K
+program on the Unix system, and start @value{GDBN}---specifying as argument the
+name of your 29K program:
+
+@example
+cd /usr/joe/work29k
+@value{GDBP} myfoo
+@end example
+
+@need 500
+Now you can use the @code{target} command:
+
+@example
+target amd-eb /dev/ttya 9600 MYFOO
+@c FIXME: test above 'target amd-eb' as spelled, with caps! caps are meant to
+@c emphasize that this is the name as seen by DOS (since I think DOS is
+@c single-minded about case of letters). ---doc@cygnus.com, 25feb91
+@end example
+
+@noindent
+In this example, we've assumed your program is in a file called
+@file{myfoo}. Note that the filename given as the last argument to
+@code{target amd-eb} should be the name of the program as it appears to DOS.
+In our example this is simply @code{MYFOO}, but in general it can include
+a DOS path, and depending on your transfer mechanism may not resemble
+the name on the Unix side.
+
+At this point, you can set any breakpoints you wish; when you are ready
+to see your program run on the 29K board, use the @value{GDBN} command
+@code{run}.
+
+To stop debugging the remote program, use the @value{GDBN} @code{detach}
+command.
+
+To return control of the PC to its console, use @code{tip} or @code{cu}
+once again, after your @value{GDBN} session has concluded, to attach to
+@code{EBMON}. You can then type the command @code{q} to shut down
+@code{EBMON}, returning control to the DOS command-line interpreter.
+Type @code{CTTY con} to return command input to the main DOS console,
+and type @kbd{~.} to leave @code{tip} or @code{cu}.
+
+@node Remote Log
+@subsubsection Remote log
+@kindex eb.log
+@cindex log file for EB29K
+
+The @code{target amd-eb} command creates a file @file{eb.log} in the
+current working directory, to help debug problems with the connection.
+@file{eb.log} records all the output from @code{EBMON}, including echoes
+of the commands sent to it. Running @samp{tail -f} on this file in
+another window often helps to understand trouble with @code{EBMON}, or
+unexpected events on the PC side of the connection.
+
+@node ARM
+@subsection ARM
+
+@table @code
+
+@kindex target rdi
+@item target rdi @var{dev}
+ARM Angel monitor, via RDI library interface to ADP protocol. You may
+use this target to communicate with both boards running the Angel
+monitor, or with the EmbeddedICE JTAG debug device.
+
+@kindex target rdp
+@item target rdp @var{dev}
+ARM Demon monitor.
+
+@end table
+
+@node H8/300
+@subsection Hitachi H8/300
+
+@table @code
+
+@kindex target hms
+@item target hms @var{dev}
+A Hitachi SH, H8/300, or H8/500 board, attached via serial line to your host.
+Use special commands @code{device} and @code{speed} to control the serial
+line and the communications speed used.
+
+@kindex target e7000
+@item target e7000 @var{dev}
+E7000 emulator for Hitachi H8 and SH.
+
+@kindex target sh3
+@kindex target sh3e
+@item target sh3 @var{dev}
+@item target sh3e @var{dev}
+Hitachi SH-3 and SH-3E target systems.
+
+@end table
+
+@cindex download to H8/300 or H8/500
+@cindex H8/300 or H8/500 download
+@cindex download to Hitachi SH
+@cindex Hitachi SH download
+When you select remote debugging to a Hitachi SH, H8/300, or H8/500
+board, the @code{load} command downloads your program to the Hitachi
+board and also opens it as the current executable target for
+@value{GDBN} on your host (like the @code{file} command).
+
+@value{GDBN} needs to know these things to talk to your
+Hitachi SH, H8/300, or H8/500:
+
+@enumerate
+@item
+that you want to use @samp{target hms}, the remote debugging interface
+for Hitachi microprocessors, or @samp{target e7000}, the in-circuit
+emulator for the Hitachi SH and the Hitachi 300H. (@samp{target hms} is
+the default when GDB is configured specifically for the Hitachi SH,
+H8/300, or H8/500.)
+
+@item
+what serial device connects your host to your Hitachi board (the first
+serial device available on your host is the default).
+
+@item
+what speed to use over the serial device.
+@end enumerate
+
+@menu
+* Hitachi Boards:: Connecting to Hitachi boards.
+* Hitachi ICE:: Using the E7000 In-Circuit Emulator.
+* Hitachi Special:: Special @value{GDBN} commands for Hitachi micros.
+@end menu
+
+@node Hitachi Boards
+@subsubsection Connecting to Hitachi boards
+
+@c only for Unix hosts
+@kindex device
+@cindex serial device, Hitachi micros
+Use the special @code{@value{GDBP}} command @samp{device @var{port}} if you
+need to explicitly set the serial device. The default @var{port} is the
+first available port on your host. This is only necessary on Unix
+hosts, where it is typically something like @file{/dev/ttya}.
+
+@kindex speed
+@cindex serial line speed, Hitachi micros
+@code{@value{GDBP}} has another special command to set the communications
+speed: @samp{speed @var{bps}}. This command also is only used from Unix
+hosts; on DOS hosts, set the line speed as usual from outside GDB with
+the DOS @kbd{mode} command (for instance, @w{@samp{mode
+com2:9600,n,8,1,p}} for a 9600 bps connection).
+
+The @samp{device} and @samp{speed} commands are available only when you
+use a Unix host to debug your Hitachi microprocessor programs. If you
+use a DOS host,
+@value{GDBN} depends on an auxiliary terminate-and-stay-resident program
+called @code{asynctsr} to communicate with the development board
+through a PC serial port. You must also use the DOS @code{mode} command
+to set up the serial port on the DOS side.
+
+The following sample session illustrates the steps needed to start a
+program under @value{GDBN} control on an H8/300. The example uses a
+sample H8/300 program called @file{t.x}. The procedure is the same for
+the Hitachi SH and the H8/500.
+
+First hook up your development board. In this example, we use a
+board attached to serial port @code{COM2}; if you use a different serial
+port, substitute its name in the argument of the @code{mode} command.
+When you call @code{asynctsr}, the auxiliary comms program used by the
+degugger, you give it just the numeric part of the serial port's name;
+for example, @samp{asyncstr 2} below runs @code{asyncstr} on
+@code{COM2}.
+
+@example
+C:\H8300\TEST> asynctsr 2
+C:\H8300\TEST> mode com2:9600,n,8,1,p
+
+Resident portion of MODE loaded
+
+COM2: 9600, n, 8, 1, p
+
+@end example
+
+@quotation
+@emph{Warning:} We have noticed a bug in PC-NFS that conflicts with
+@code{asynctsr}. If you also run PC-NFS on your DOS host, you may need to
+disable it, or even boot without it, to use @code{asynctsr} to control
+your development board.
+@end quotation
+
+@kindex target hms
+Now that serial communications are set up, and the development board is
+connected, you can start up @value{GDBN}. Call @code{@value{GDBP}} with
+the name of your program as the argument. @code{@value{GDBP}} prompts
+you, as usual, with the prompt @samp{(@value{GDBP})}. Use two special
+commands to begin your debugging session: @samp{target hms} to specify
+cross-debugging to the Hitachi board, and the @code{load} command to
+download your program to the board. @code{load} displays the names of
+the program's sections, and a @samp{*} for each 2K of data downloaded.
+(If you want to refresh @value{GDBN} data on symbols or on the
+executable file without downloading, use the @value{GDBN} commands
+@code{file} or @code{symbol-file}. These commands, and @code{load}
+itself, are described in @ref{Files,,Commands to specify files}.)
+
+@smallexample
+(eg-C:\H8300\TEST) @value{GDBP} t.x
+GDB is free software and you are welcome to distribute copies
+ of it under certain conditions; type "show copying" to see
+ the conditions.
+There is absolutely no warranty for GDB; type "show warranty"
+for details.
+GDB @value{GDBVN}, Copyright 1992 Free Software Foundation, Inc...
+(gdb) target hms
+Connected to remote H8/300 HMS system.
+(gdb) load t.x
+.text : 0x8000 .. 0xabde ***********
+.data : 0xabde .. 0xad30 *
+.stack : 0xf000 .. 0xf014 *
+@end smallexample
+
+At this point, you're ready to run or debug your program. From here on,
+you can use all the usual @value{GDBN} commands. The @code{break} command
+sets breakpoints; the @code{run} command starts your program;
+@code{print} or @code{x} display data; the @code{continue} command
+resumes execution after stopping at a breakpoint. You can use the
+@code{help} command at any time to find out more about @value{GDBN} commands.
+
+Remember, however, that @emph{operating system} facilities aren't
+available on your development board; for example, if your program hangs,
+you can't send an interrupt---but you can press the @sc{reset} switch!
+
+Use the @sc{reset} button on the development board
+@itemize @bullet
+@item
+to interrupt your program (don't use @kbd{ctl-C} on the DOS host---it has
+no way to pass an interrupt signal to the development board); and
+
+@item
+to return to the @value{GDBN} command prompt after your program finishes
+normally. The communications protocol provides no other way for @value{GDBN}
+to detect program completion.
+@end itemize
+
+In either case, @value{GDBN} sees the effect of a @sc{reset} on the
+development board as a ``normal exit'' of your program.
+
+@node Hitachi ICE
+@subsubsection Using the E7000 in-circuit emulator
+
+@kindex target e7000
+You can use the E7000 in-circuit emulator to develop code for either the
+Hitachi SH or the H8/300H. Use one of these forms of the @samp{target
+e7000} command to connect @value{GDBN} to your E7000:
+
+@table @code
+@item target e7000 @var{port} @var{speed}
+Use this form if your E7000 is connected to a serial port. The
+@var{port} argument identifies what serial port to use (for example,
+@samp{com2}). The third argument is the line speed in bits per second
+(for example, @samp{9600}).
+
+@item target e7000 @var{hostname}
+If your E7000 is installed as a host on a TCP/IP network, you can just
+specify its hostname; @value{GDBN} uses @code{telnet} to connect.
+@end table
+
+@node Hitachi Special
+@subsubsection Special @value{GDBN} commands for Hitachi micros
+
+Some @value{GDBN} commands are available only for the H8/300:
+
+@table @code
+
+@kindex set machine
+@kindex show machine
+@item set machine h8300
+@itemx set machine h8300h
+Condition @value{GDBN} for one of the two variants of the H8/300
+architecture with @samp{set machine}. You can use @samp{show machine}
+to check which variant is currently in effect.
+
+@end table
+
+@node H8/500
+@subsection H8/500
+
+@table @code
+
+@kindex set memory @var{mod}
+@cindex memory models, H8/500
+@item set memory @var{mod}
+@itemx show memory
+Specify which H8/500 memory model (@var{mod}) you are using with
+@samp{set memory}; check which memory model is in effect with @samp{show
+memory}. The accepted values for @var{mod} are @code{small},
+@code{big}, @code{medium}, and @code{compact}.
+
+@end table
+
+@node i960
+@subsection Intel i960
+
+@table @code
+
+@kindex target mon960
+@item target mon960 @var{dev}
+MON960 monitor for Intel i960.
+
+@item target nindy @var{devicename}
+An Intel 960 board controlled by a Nindy Monitor. @var{devicename} is
+the name of the serial device to use for the connection, e.g.
+@file{/dev/ttya}.
+
+@end table
+
+@cindex Nindy
+@cindex i960
+@dfn{Nindy} is a ROM Monitor program for Intel 960 target systems. When
+@value{GDBN} is configured to control a remote Intel 960 using Nindy, you can
+tell @value{GDBN} how to connect to the 960 in several ways:
+
+@itemize @bullet
+@item
+Through command line options specifying serial port, version of the
+Nindy protocol, and communications speed;
+
+@item
+By responding to a prompt on startup;
+
+@item
+By using the @code{target} command at any point during your @value{GDBN}
+session. @xref{Target Commands, ,Commands for managing targets}.
+
+@kindex target nindy
+@item target nindy @var{devicename}
+An Intel 960 board controlled by a Nindy Monitor. @var{devicename} is
+the name of the serial device to use for the connection, e.g.
+@file{/dev/ttya}.
+
+@end itemize
+
+@cindex download to Nindy-960
+With the Nindy interface to an Intel 960 board, @code{load}
+downloads @var{filename} to the 960 as well as adding its symbols in
+@value{GDBN}.
+
+@menu
+* Nindy Startup:: Startup with Nindy
+* Nindy Options:: Options for Nindy
+* Nindy Reset:: Nindy reset command
+@end menu
+
+@node Nindy Startup
+@subsubsection Startup with Nindy
+
+If you simply start @code{@value{GDBP}} without using any command-line
+options, you are prompted for what serial port to use, @emph{before} you
+reach the ordinary @value{GDBN} prompt:
+
+@example
+Attach /dev/ttyNN -- specify NN, or "quit" to quit:
+@end example
+
+@noindent
+Respond to the prompt with whatever suffix (after @samp{/dev/tty})
+identifies the serial port you want to use. You can, if you choose,
+simply start up with no Nindy connection by responding to the prompt
+with an empty line. If you do this and later wish to attach to Nindy,
+use @code{target} (@pxref{Target Commands, ,Commands for managing targets}).
+
+@node Nindy Options
+@subsubsection Options for Nindy
+
+These are the startup options for beginning your @value{GDBN} session with a
+Nindy-960 board attached:
+
+@table @code
+@item -r @var{port}
+Specify the serial port name of a serial interface to be used to connect
+to the target system. This option is only available when @value{GDBN} is
+configured for the Intel 960 target architecture. You may specify
+@var{port} as any of: a full pathname (e.g. @samp{-r /dev/ttya}), a
+device name in @file{/dev} (e.g. @samp{-r ttya}), or simply the unique
+suffix for a specific @code{tty} (e.g. @samp{-r a}).
+
+@item -O
+(An uppercase letter ``O'', not a zero.) Specify that @value{GDBN} should use
+the ``old'' Nindy monitor protocol to connect to the target system.
+This option is only available when @value{GDBN} is configured for the Intel 960
+target architecture.
+
+@quotation
+@emph{Warning:} if you specify @samp{-O}, but are actually trying to
+connect to a target system that expects the newer protocol, the connection
+fails, appearing to be a speed mismatch. @value{GDBN} repeatedly
+attempts to reconnect at several different line speeds. You can abort
+this process with an interrupt.
+@end quotation
+
+@item -brk
+Specify that @value{GDBN} should first send a @code{BREAK} signal to the target
+system, in an attempt to reset it, before connecting to a Nindy target.
+
+@quotation
+@emph{Warning:} Many target systems do not have the hardware that this
+requires; it only works with a few boards.
+@end quotation
+@end table
+
+The standard @samp{-b} option controls the line speed used on the serial
+port.
+
+@c @group
+@node Nindy Reset
+@subsubsection Nindy reset command
+
+@table @code
+@item reset
+@kindex reset
+For a Nindy target, this command sends a ``break'' to the remote target
+system; this is only useful if the target has been equipped with a
+circuit to perform a hard reset (or some other interesting action) when
+a break is detected.
+@end table
+@c @end group
+
+@node M32R/D
+@subsection Mitsubishi M32R/D
+
+@table @code
+
+@kindex target m32r
+@item target m32r @var{dev}
+Mitsubishi M32R/D ROM monitor.
+
+@end table
+
+@node M68K
+@subsection M68k
+
+The Motorola m68k configuration includes ColdFire support, and
+target command for the following ROM monitors.
+
+@table @code
+
+@kindex target abug
+@item target abug @var{dev}
+ABug ROM monitor for M68K.
+
+@kindex target cpu32bug
+@item target cpu32bug @var{dev}
+CPU32BUG monitor, running on a CPU32 (M68K) board.
+
+@kindex target dbug
+@item target dbug @var{dev}
+dBUG ROM monitor for Motorola ColdFire.
+
+@kindex target est
+@item target est @var{dev}
+EST-300 ICE monitor, running on a CPU32 (M68K) board.
+
+@kindex target rom68k
+@item target rom68k @var{dev}
+ROM 68K monitor, running on an M68K IDP board.
+
+@end table
+
+If @value{GDBN} is configured with @code{m68*-ericsson-*}, it will
+instead have only a single special target command:
+
+@table @code
+
+@kindex target es1800
+@item target es1800 @var{dev}
+ES-1800 emulator for M68K.
+
+@end table
+
+[context?]
+
+@table @code
+
+@kindex target rombug
+@item target rombug @var{dev}
+ROMBUG ROM monitor for OS/9000.
+
+@end table
+
+@node M88K
+@subsection M88K
+
+@table @code
+
+@kindex target bug
+@item target bug @var{dev}
+BUG monitor, running on a MVME187 (m88k) board.
+
+@end table
+
+@node MIPS Embedded
+@subsection MIPS Embedded
+
+@cindex MIPS boards
+@value{GDBN} can use the MIPS remote debugging protocol to talk to a
+MIPS board attached to a serial line. This is available when
+you configure @value{GDBN} with @samp{--target=mips-idt-ecoff}.
+
+@need 1000
+Use these @value{GDBN} commands to specify the connection to your target board:
+
+@table @code
+@item target mips @var{port}
+@kindex target mips @var{port}
+To run a program on the board, start up @code{@value{GDBP}} with the
+name of your program as the argument. To connect to the board, use the
+command @samp{target mips @var{port}}, where @var{port} is the name of
+the serial port connected to the board. If the program has not already
+been downloaded to the board, you may use the @code{load} command to
+download it. You can then use all the usual @value{GDBN} commands.
+
+For example, this sequence connects to the target board through a serial
+port, and loads and runs a program called @var{prog} through the
+debugger:
+
+@example
+host$ @value{GDBP} @var{prog}
+GDB is free software and @dots{}
+(gdb) target mips /dev/ttyb
+(gdb) load @var{prog}
+(gdb) run
+@end example
+
+@item target mips @var{hostname}:@var{portnumber}
+On some @value{GDBN} host configurations, you can specify a TCP
+connection (for instance, to a serial line managed by a terminal
+concentrator) instead of a serial port, using the syntax
+@samp{@var{hostname}:@var{portnumber}}.
+
+@item target pmon @var{port}
+@kindex target pmon @var{port}
+PMON ROM monitor.
+
+@item target ddb @var{port}
+@kindex target ddb @var{port}
+NEC's DDB variant of PMON for Vr4300.
+
+@item target lsi @var{port}
+@kindex target lsi @var{port}
+LSI variant of PMON.
+
+@kindex target r3900
+@item target r3900 @var{dev}
+Densan DVE-R3900 ROM monitor for Toshiba R3900 Mips.
+
+@kindex target array
+@item target array @var{dev}
+Array Tech LSI33K RAID controller board.
+
+@end table
+
+
+@noindent
+@value{GDBN} also supports these special commands for MIPS targets:
+
+@table @code
+@item set processor @var{args}
+@itemx show processor
+@kindex set processor @var{args}
+@kindex show processor
+Use the @code{set processor} command to set the type of MIPS
+processor when you want to access processor-type-specific registers.
+For example, @code{set processor @var{r3041}} tells @value{GDBN}
+to use the CPO registers appropriate for the 3041 chip.
+Use the @code{show processor} command to see what MIPS processor @value{GDBN}
+is using. Use the @code{info reg} command to see what registers
+@value{GDBN} is using.
+
+@item set mipsfpu double
+@itemx set mipsfpu single
+@itemx set mipsfpu none
+@itemx show mipsfpu
+@kindex set mipsfpu
+@kindex show mipsfpu
+@cindex MIPS remote floating point
+@cindex floating point, MIPS remote
+If your target board does not support the MIPS floating point
+coprocessor, you should use the command @samp{set mipsfpu none} (if you
+need this, you may wish to put the command in your @value{GDBINIT}
+file). This tells @value{GDBN} how to find the return value of
+functions which return floating point values. It also allows
+@value{GDBN} to avoid saving the floating point registers when calling
+functions on the board. If you are using a floating point coprocessor
+with only single precision floating point support, as on the @sc{r4650}
+processor, use the command @samp{set mipsfpu single}. The default
+double precision floating point coprocessor may be selected using
+@samp{set mipsfpu double}.
+
+In previous versions the only choices were double precision or no
+floating point, so @samp{set mipsfpu on} will select double precision
+and @samp{set mipsfpu off} will select no floating point.
+
+As usual, you can inquire about the @code{mipsfpu} variable with
+@samp{show mipsfpu}.
+
+@item set remotedebug @var{n}
+@itemx show remotedebug
+@kindex set remotedebug
+@kindex show remotedebug
+@cindex @code{remotedebug}, MIPS protocol
+@cindex MIPS @code{remotedebug} protocol
+@c FIXME! For this to be useful, you must know something about the MIPS
+@c FIXME...protocol. Where is it described?
+You can see some debugging information about communications with the board
+by setting the @code{remotedebug} variable. If you set it to @code{1} using
+@samp{set remotedebug 1}, every packet is displayed. If you set it
+to @code{2}, every character is displayed. You can check the current value
+at any time with the command @samp{show remotedebug}.
+
+@item set timeout @var{seconds}
+@itemx set retransmit-timeout @var{seconds}
+@itemx show timeout
+@itemx show retransmit-timeout
+@cindex @code{timeout}, MIPS protocol
+@cindex @code{retransmit-timeout}, MIPS protocol
+@kindex set timeout
+@kindex show timeout
+@kindex set retransmit-timeout
+@kindex show retransmit-timeout
+You can control the timeout used while waiting for a packet, in the MIPS
+remote protocol, with the @code{set timeout @var{seconds}} command. The
+default is 5 seconds. Similarly, you can control the timeout used while
+waiting for an acknowledgement of a packet with the @code{set
+retransmit-timeout @var{seconds}} command. The default is 3 seconds.
+You can inspect both values with @code{show timeout} and @code{show
+retransmit-timeout}. (These commands are @emph{only} available when
+@value{GDBN} is configured for @samp{--target=mips-idt-ecoff}.)
+
+The timeout set by @code{set timeout} does not apply when @value{GDBN}
+is waiting for your program to stop. In that case, @value{GDBN} waits
+forever because it has no way of knowing how long the program is going
+to run before stopping.
+@end table
+
+@node PowerPC
+@subsection PowerPC
+
+@table @code
+
+@kindex target dink32
+@item target dink32 @var{dev}
+DINK32 ROM monitor.
+
+@kindex target ppcbug
+@item target ppcbug @var{dev}
+@kindex target ppcbug1
+@item target ppcbug1 @var{dev}
+PPCBUG ROM monitor for PowerPC.
+
+@kindex target sds
+@item target sds @var{dev}
+SDS monitor, running on a PowerPC board (such as Motorola's ADS).
+
+@end table
+
+@node PA
+@subsection HP PA Embedded
+
+@table @code
+
+@kindex target op50n
+@item target op50n @var{dev}
+OP50N monitor, running on an OKI HPPA board.
+
+@kindex target w89k
+@item target w89k @var{dev}
+W89K monitor, running on a Winbond HPPA board.
+
+@end table
+
+@node SH
+@subsection Hitachi SH
+
+@table @code
+
+@kindex target hms
+@item target hms @var{dev}
+A Hitachi SH board attached via serial line to your host. Use special
+commands @code{device} and @code{speed} to control the serial line and
+the communications speed used.
+
+@kindex target e7000
+@item target e7000 @var{dev}
+E7000 emulator for Hitachi SH.
+
+@kindex target sh3
+@kindex target sh3e
+@item target sh3 @var{dev}
+@item target sh3e @var{dev}
+Hitachi SH-3 and SH-3E target systems.
+
+@end table
+
+@node Sparclet
+@subsection Tsqware Sparclet
+
+@cindex Sparclet
+
+@value{GDBN} enables developers to debug tasks running on
+Sparclet targets from a Unix host.
+@value{GDBN} uses code that runs on
+both the Unix host and on the Sparclet target. The program
+@code{gdb} is installed and executed on the Unix host.
+
+@table @code
+@item timeout @var{args}
+@kindex remotetimeout
+@value{GDBN} now supports the option @code{remotetimeout}.
+This option is set by the user, and @var{args} represents the number of
+seconds @value{GDBN} waits for responses.
+@end table
+
+@kindex Compiling
+When compiling for debugging, include the options "-g" to get debug
+information and "-Ttext" to relocate the program to where you wish to
+load it on the target. You may also want to add the options "-n" or
+"-N" in order to reduce the size of the sections.
+
+@example
+sparclet-aout-gcc prog.c -Ttext 0x12010000 -g -o prog -N
+@end example
+
+You can use objdump to verify that the addresses are what you intended.
+
+@example
+sparclet-aout-objdump --headers --syms prog
+@end example
+
+@kindex Running
+Once you have set
+your Unix execution search path to find @value{GDBN}, you are ready to
+run @value{GDBN}. From your Unix host, run @code{gdb}
+(or @code{sparclet-aout-gdb}, depending on your installation).
+
+@value{GDBN} comes up showing the prompt:
+
+@example
+(gdbslet)
+@end example
+
+@menu
+* Sparclet File:: Setting the file to debug
+* Sparclet Connection:: Connecting to Sparclet
+* Sparclet Download:: Sparclet download
+* Sparclet Execution:: Running and debugging
+@end menu
+
+@node Sparclet File
+@subsubsection Setting file to debug
+
+The @value{GDBN} command @code{file} lets you choose with program to debug.
+
+@example
+(gdbslet) file prog
+@end example
+
+@need 1000
+@value{GDBN} then attempts to read the symbol table of @file{prog}.
+@value{GDBN} locates
+the file by searching the directories listed in the command search
+path.
+If the file was compiled with debug information (option "-g"), source
+files will be searched as well.
+@value{GDBN} locates
+the source files by searching the directories listed in the directory search
+path (@pxref{Environment, ,Your program's environment}).
+If it fails
+to find a file, it displays a message such as:
+
+@example
+prog: No such file or directory.
+@end example
+
+When this happens, add the appropriate directories to the search paths with
+the @value{GDBN} commands @code{path} and @code{dir}, and execute the
+@code{target} command again.
+
+@node Sparclet Connection
+@subsubsection Connecting to Sparclet
+
+The @value{GDBN} command @code{target} lets you connect to a Sparclet target.
+To connect to a target on serial port ``@code{ttya}'', type:
+
+@example
+(gdbslet) target sparclet /dev/ttya
+Remote target sparclet connected to /dev/ttya
+main () at ../prog.c:3
+@end example
+
+@need 750
+@value{GDBN} displays messages like these:
+
+@smallexample
+Connected to ttya.
+@end smallexample
+
+@node Sparclet Download
+@subsubsection Sparclet download
+
+@cindex download to Sparclet
+Once connected to the Sparclet target,
+you can use the @value{GDBN}
+@code{load} command to download the file from the host to the target.
+The file name and load offset should be given as arguments to the @code{load}
+command.
+Since the file format is aout, the program must be loaded to the starting
+address. You can use objdump to find out what this value is. The load
+offset is an offset which is added to the VMA (virtual memory address)
+of each of the file's sections.
+For instance, if the program
+@file{prog} was linked to text address 0x1201000, with data at 0x12010160
+and bss at 0x12010170, in @value{GDBN}, type:
+
+@example
+(gdbslet) load prog 0x12010000
+Loading section .text, size 0xdb0 vma 0x12010000
+@end example
+
+If the code is loaded at a different address then what the program was linked
+to, you may need to use the @code{section} and @code{add-symbol-file} commands
+to tell @value{GDBN} where to map the symbol table.
+
+@node Sparclet Execution
+@subsubsection Running and debugging
+
+@cindex running and debugging Sparclet programs
+You can now begin debugging the task using @value{GDBN}'s execution control
+commands, @code{b}, @code{step}, @code{run}, etc. See the @value{GDBN}
+manual for the list of commands.
+
+@example
+(gdbslet) b main
+Breakpoint 1 at 0x12010000: file prog.c, line 3.
+(gdbslet) run
+Starting program: prog
+Breakpoint 1, main (argc=1, argv=0xeffff21c) at prog.c:3
+3 char *symarg = 0;
+(gdbslet) step
+4 char *execarg = "hello!";
+(gdbslet)
+@end example
+
+@node Sparclite
+@subsection Fujitsu Sparclite
+
+@table @code
+
+@kindex target sparclite
+@item target sparclite @var{dev}
+Fujitsu sparclite boards, used only for the purpose of loading.
+You must use an additional command to debug the program.
+For example: target remote @var{dev} using @value{GDBN} standard
+remote protocol.
+
+@end table
+
+@node ST2000
+@subsection Tandem ST2000
+
+GDB may be used with a Tandem ST2000 phone switch, running Tandem's
+STDBUG protocol.
+
+To connect your ST2000 to the host system, see the manufacturer's
+manual. Once the ST2000 is physically attached, you can run:
+
+@example
+target st2000 @var{dev} @var{speed}
+@end example
+
+@noindent
+to establish it as your debugging environment. @var{dev} is normally
+the name of a serial device, such as @file{/dev/ttya}, connected to the
+ST2000 via a serial line. You can instead specify @var{dev} as a TCP
+connection (for example, to a serial line attached via a terminal
+concentrator) using the syntax @code{@var{hostname}:@var{portnumber}}.
+
+The @code{load} and @code{attach} commands are @emph{not} defined for
+this target; you must load your program into the ST2000 as you normally
+would for standalone operation. @value{GDBN} reads debugging information
+(such as symbols) from a separate, debugging version of the program
+available on your host computer.
+@c FIXME!! This is terribly vague; what little content is here is
+@c basically hearsay.
+
+@cindex ST2000 auxiliary commands
+These auxiliary @value{GDBN} commands are available to help you with the ST2000
+environment:
+
+@table @code
+@item st2000 @var{command}
+@kindex st2000 @var{cmd}
+@cindex STDBUG commands (ST2000)
+@cindex commands to STDBUG (ST2000)
+Send a @var{command} to the STDBUG monitor. See the manufacturer's
+manual for available commands.
+
+@item connect
+@cindex connect (to STDBUG)
+Connect the controlling terminal to the STDBUG command monitor. When
+you are done interacting with STDBUG, typing either of two character
+sequences gets you back to the @value{GDBN} command prompt:
+@kbd{@key{RET}~.} (Return, followed by tilde and period) or
+@kbd{@key{RET}~@key{C-d}} (Return, followed by tilde and control-D).
+@end table
+
+@node Z8000
+@subsection Zilog Z8000
+
+@cindex Z8000
+@cindex simulator, Z8000
+@cindex Zilog Z8000 simulator
+
+When configured for debugging Zilog Z8000 targets, @value{GDBN} includes
+a Z8000 simulator.
+
+For the Z8000 family, @samp{target sim} simulates either the Z8002 (the
+unsegmented variant of the Z8000 architecture) or the Z8001 (the
+segmented variant). The simulator recognizes which architecture is
+appropriate by inspecting the object code.
+
+@table @code
+@item target sim @var{args}
+@kindex sim
+@kindex target sim
+Debug programs on a simulated CPU. If the simulator supports setup
+options, specify them via @var{args}.
+@end table
+
+@noindent
+After specifying this target, you can debug programs for the simulated
+CPU in the same style as programs for your host computer; use the
+@code{file} command to load a new program image, the @code{run} command
+to run your program, and so on.
+
+As well as making available all the usual machine registers (see
+@code{info reg}), the Z8000 simulator provides three additional items
+of information as specially named registers:
+
+@table @code
+
+@item cycles
+Counts clock-ticks in the simulator.
+
+@item insts
+Counts instructions run in the simulator.
+
+@item time
+Execution time in 60ths of a second.
+
+@end table
+
+You can refer to these values in @value{GDBN} expressions with the usual
+conventions; for example, @w{@samp{b fputc if $cycles>5000}} sets a
+conditional breakpoint that suspends only after at least 5000
+simulated clock ticks.
+
+@node Architectures
+@section Architectures
+
+This section describes characteristics of architectures that affect
+all uses of GDB with this architecture, both native and cross.
+
+@menu
+* A29K::
+* Alpha::
+* MIPS::
+@end menu
+
+@node A29K
+@subsection A29K
+
+@table @code
+
+@kindex set rstack_high_address
+@cindex AMD 29K register stack
+@cindex register stack, AMD29K
+@item set rstack_high_address @var{address}
+On AMD 29000 family processors, registers are saved in a separate
+``register stack''. There is no way for @value{GDBN} to determine the
+extent of this stack. Normally, @value{GDBN} just assumes that the
+stack is ``large enough''. This may result in @value{GDBN} referencing
+memory locations that do not exist. If necessary, you can get around
+this problem by specifying the ending address of the register stack with
+the @code{set rstack_high_address} command. The argument should be an
+address, which you probably want to precede with @samp{0x} to specify in
+hexadecimal.
+
+@kindex show rstack_high_address
+@item show rstack_high_address
+Display the current limit of the register stack, on AMD 29000 family
+processors.
+
+@end table
+
+@node Alpha
+@subsection Alpha
+
+See the following section.
+
+@node MIPS
+@subsection MIPS
+
+@cindex stack on Alpha
+@cindex stack on MIPS
+@cindex Alpha stack
+@cindex MIPS stack
+Alpha- and MIPS-based computers use an unusual stack frame, which
+sometimes requires @value{GDBN} to search backward in the object code to
+find the beginning of a function.
+
+@cindex response time, MIPS debugging
+To improve response time (especially for embedded applications, where
+@value{GDBN} may be restricted to a slow serial line for this search)
+you may want to limit the size of this search, using one of these
+commands:
+
+@table @code
+@cindex @code{heuristic-fence-post} (Alpha,MIPS)
+@item set heuristic-fence-post @var{limit}
+Restrict @value{GDBN} to examining at most @var{limit} bytes in its
+search for the beginning of a function. A value of @var{0} (the
+default) means there is no limit. However, except for @var{0}, the
+larger the limit the more bytes @code{heuristic-fence-post} must search
+and therefore the longer it takes to run.
+
+@item show heuristic-fence-post
+Display the current limit.
+@end table
+
+@noindent
+These commands are available @emph{only} when @value{GDBN} is configured
+for debugging programs on Alpha or MIPS processors.
+
+
@node Controlling GDB
@chapter Controlling @value{GDBN}
HPPA's. This should all be ripped out, and a scheme like elfread.c
used.
-@item GDB_TARGET_IS_MACH386
-@item GDB_TARGET_IS_SUN3
-@item GDB_TARGET_IS_SUN386
-Kludges that should go away.
-
@item GET_LONGJMP_TARGET
For most machines, this is a target-dependent parameter. On the
DECstation and the Iris, this is a native-dependent parameter, since
@item gdb/config/@var{arch}/@var{ttt}.mt
Contains a Makefile fragment specific to this target. Specifies what
object files are needed for target @var{ttt}, by defining
-@samp{TDEPFILES=@dots{}}. Also specifies the header file which
-describes @var{ttt}, by defining @samp{TM_FILE= tm-@var{ttt}.h}. You
-can also define @samp{TM_CFLAGS}, @samp{TM_CLIBS}, @samp{TM_CDEPS}, but
-these are now deprecated and may go away in future versions of GDB.
+@samp{TDEPFILES=@dots{}} and @samp{TDEPLIBS=@dots{}}. Also specifies
+the header file which describes @var{ttt}, by defining @samp{TM_FILE=
+tm-@var{ttt}.h}.
+
+You can also define @samp{TM_CFLAGS}, @samp{TM_CLIBS}, @samp{TM_CDEPS},
+but these are now deprecated, replaced by autoconf, and may go away in
+future versions of GDB.
@item gdb/config/@var{arch}/tm-@var{ttt}.h
(@file{tm.h} is a link to this file, created by configure). Contains
extern void delete_file_handler PARAMS ((int));
extern void add_file_handler PARAMS ((int, void (*) (void), gdb_client_data));
extern void mark_async_signal_handler PARAMS ((async_signal_handler *));
-extern async_signal_handler *
+extern async_signal_handler *
create_async_signal_handler PARAMS ((handler_func *, gdb_client_data));
extern void delete_async_signal_handler PARAMS ((async_signal_handler ** async_handler_ptr));
extern void push_prompt PARAMS ((char *, char *, char *));
extern void gdb_readline2 PARAMS ((void));
-/* Exported variables from event-top.c.
+/* Exported variables and functions from event-top.c.
FIXME: these should really go into top.h. */
extern int async_command_editing_p;
+extern int exec_done_display_p;
extern char *async_annotation_suffix;
extern char *new_async_prompt;
extern struct prompts the_prompts;
extern void (*call_readline) PARAMS ((void));
extern void (*input_handler) PARAMS ((char *));
extern int input_fd;
+void mark_async_signal_handler_wrapper (void *);
+void async_request_quit (gdb_client_data);
#include <signal.h>
#include "event-loop.h"
+/* For dont_repeat() */
+#include "gdbcmd.h"
+
/* readline include files */
#include <readline/readline.h>
#include <readline/history.h>
/* Functions to be invoked by the event loop in response to
signals. */
-void async_request_quit PARAMS ((gdb_client_data));
static void async_do_nothing PARAMS ((gdb_client_data));
static void async_disconnect PARAMS ((gdb_client_data));
static void async_float_handler PARAMS ((gdb_client_data));
static void async_stop_sig PARAMS ((gdb_client_data));
-/* If this definition isn't overridden by the header files, assume
- that isatty and fileno exist on this system. */
-#ifndef ISATTY
-#define ISATTY(FP) (isatty (fileno (FP)))
-#endif
-
/* Readline offers an alternate interface, via callback
functions. These are all included in the file callback.c in the
readline distribution. This file provides (mainly) a function, which
annotation_level is 2. */
char *async_annotation_suffix;
+/* This is used to display the notification of the completion of an
+ asynchronous execution command. */
+int exec_done_display_p = 0;
+
/* This is the file descriptor for the input stream that GDB uses to
read commands from. */
int input_fd;
PTR sigtstp_token;
#endif
-void mark_async_signal_handler_wrapper PARAMS ((void *));
-
/* Structure to save a partially entered command. This is used when
the user types '\' at the end of a command line. This is necessary
because each line of input is handled by a different call to
#include "gdbthread.h"
#include <signal.h>
-#ifdef HAVE_UNISTD_H
-#include <unistd.h>
-#endif
/* This just gets used as a default if we can't find SHELL */
#ifndef SHELL_FILE
--- /dev/null
+/* User Interface Events.
+ Copyright 1999 Free Software Foundation, Inc.
+
+ Contributed by Cygnus Solutions.
+
+This file is part of GDB.
+
+This program is free software; you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation; either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program; if not, write to the Free Software
+Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. */
+
+/* Work in progress */
+
+/* This file was created with the aid of ``gdb-events.sh''.
+
+ The bourn shell script ``gdb-events.sh'' creates the files
+ ``new-gdb-events.c'' and ``new-gdb-events.h and then compares
+ them against the existing ``gdb-events.[hc]''. Any differences
+ found being reported.
+
+ If editing this file, please also run gdb-events.sh and merge any
+ changes into that script. Conversely, when making sweeping changes
+ to this file, modifying gdb-events.sh and using its output may
+ prove easier. */
+
+
+#include "defs.h"
+#include "gdb-events.h"
+#include "gdbcmd.h"
+
+#undef XMALLOC
+#define XMALLOC(TYPE) ((TYPE*) xmalloc (sizeof (TYPE)))
+
+#if WITH_GDB_EVENTS
+static struct gdb_events null_event_hooks;
+static struct gdb_events queue_event_hooks;
+static struct gdb_events *current_event_hooks = &null_event_hooks;
+#endif
+
+int gdb_events_debug;
+
+#if WITH_GDB_EVENTS
+
+void
+breakpoint_create_event (int b)
+{
+ if (gdb_events_debug)
+ fprintf_unfiltered (gdb_stdlog, "breakpoint_create_event\n");
+ if (!current_event_hooks->breakpoint_create)
+ return;
+ current_event_hooks->breakpoint_create (b);
+}
+
+void
+breakpoint_delete_event (int b)
+{
+ if (gdb_events_debug)
+ fprintf_unfiltered (gdb_stdlog, "breakpoint_delete_event\n");
+ if (!current_event_hooks->breakpoint_delete)
+ return;
+ current_event_hooks->breakpoint_delete (b);
+}
+
+void
+breakpoint_modify_event (int b)
+{
+ if (gdb_events_debug)
+ fprintf_unfiltered (gdb_stdlog, "breakpoint_modify_event\n");
+ if (!current_event_hooks->breakpoint_modify)
+ return;
+ current_event_hooks->breakpoint_modify (b);
+}
+
+#endif
+
+#if WITH_GDB_EVENTS
+void
+set_gdb_event_hooks (struct gdb_events *vector)
+{
+ if (vector == NULL)
+ current_event_hooks = &queue_event_hooks;
+ else
+ current_event_hooks = vector;
+}
+#endif
+
+enum gdb_event
+ {
+ breakpoint_create,
+ breakpoint_delete,
+ breakpoint_modify,
+ nr_gdb_events
+ };
+
+struct breakpoint_create
+ {
+ int b;
+ };
+
+struct breakpoint_delete
+ {
+ int b;
+ };
+
+struct breakpoint_modify
+ {
+ int b;
+ };
+
+struct event
+ {
+ enum gdb_event type;
+ struct event *next;
+ union
+ {
+ struct breakpoint_create breakpoint_create;
+ struct breakpoint_delete breakpoint_delete;
+ struct breakpoint_modify breakpoint_modify;
+ }
+ data;
+ };
+struct event *pending_events;
+struct event *delivering_events;
+
+static void
+append (struct event *new_event)
+{
+ struct event **event = &pending_events;
+ while ((*event) != NULL)
+ event = &((*event)->next);
+ (*event) = new_event;
+ (*event)->next = NULL;
+}
+
+static void
+queue_breakpoint_create (int b)
+{
+ struct event *event = XMALLOC (struct event);
+ event->type = breakpoint_create;
+ event->data.breakpoint_create.b = b;
+ append (event);
+}
+
+static void
+queue_breakpoint_delete (int b)
+{
+ struct event *event = XMALLOC (struct event);
+ event->type = breakpoint_delete;
+ event->data.breakpoint_delete.b = b;
+ append (event);
+}
+
+static void
+queue_breakpoint_modify (int b)
+{
+ struct event *event = XMALLOC (struct event);
+ event->type = breakpoint_modify;
+ event->data.breakpoint_modify.b = b;
+ append (event);
+}
+
+void
+gdb_events_deliver (struct gdb_events *vector)
+{
+ /* Just zap any events left around from last time. */
+ while (delivering_events != NULL)
+ {
+ struct event *event = delivering_events;
+ delivering_events = event->next;
+ free (event);
+ }
+ /* Process any pending events. Because one of the deliveries could
+ bail out we move everything off of the pending queue onto an
+ in-progress queue where it can, later, be cleaned up if
+ necessary. */
+ delivering_events = pending_events;
+ pending_events = NULL;
+ while (delivering_events != NULL)
+ {
+ struct event *event = delivering_events;
+ switch (event->type)
+ {
+ case breakpoint_create:
+ vector->breakpoint_create
+ (event->data.breakpoint_create.b);
+ break;
+ case breakpoint_delete:
+ vector->breakpoint_delete
+ (event->data.breakpoint_delete.b);
+ break;
+ case breakpoint_modify:
+ vector->breakpoint_modify
+ (event->data.breakpoint_modify.b);
+ break;
+ }
+ delivering_events = event->next;
+ free (event);
+ }
+}
+
+void _initialize_gdb_events (void);
+void
+_initialize_gdb_events (void)
+{
+#if WITH_GDB_EVENTS
+ queue_event_hooks.breakpoint_create = queue_breakpoint_create;
+ queue_event_hooks.breakpoint_delete = queue_breakpoint_delete;
+ queue_event_hooks.breakpoint_modify = queue_breakpoint_modify;
+#endif
+ add_show_from_set (add_set_cmd ("eventdebug",
+ class_maintenance,
+ var_zinteger,
+ (char *)&gdb_events_debug,
+ "Set event debugging.\n\
+When non-zero, event/notify debugging is enabled.", &setlist),
+ &showlist);
+}
--- /dev/null
+/* User Interface Events.
+ Copyright 1999 Free Software Foundation, Inc.
+
+ Contributed by Cygnus Solutions.
+
+This file is part of GDB.
+
+This program is free software; you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation; either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program; if not, write to the Free Software
+Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. */
+
+/* Work in progress */
+
+/* This file was created with the aid of ``gdb-events.sh''.
+
+ The bourn shell script ``gdb-events.sh'' creates the files
+ ``new-gdb-events.c'' and ``new-gdb-events.h and then compares
+ them against the existing ``gdb-events.[hc]''. Any differences
+ found being reported.
+
+ If editing this file, please also run gdb-events.sh and merge any
+ changes into that script. Conversely, when making sweeping changes
+ to this file, modifying gdb-events.sh and using its output may
+ prove easier. */
+
+
+#ifndef GDB_EVENTS_H
+#define GDB_EVENTS_H
+
+#ifndef WITH_GDB_EVENTS
+#define WITH_GDB_EVENTS 1
+#endif
+
+
+/* COMPAT: pointer variables for old, unconverted events.
+ A call to set_gdb_events() will automatically update these. */
+
+
+
+/* Type definition of all hook functions.
+ Recommended pratice is to first declare each hook function using
+ the below ftype and then define it. */
+
+typedef void (gdb_events_breakpoint_create_ftype) (int b);
+typedef void (gdb_events_breakpoint_delete_ftype) (int b);
+typedef void (gdb_events_breakpoint_modify_ftype) (int b);
+
+
+/* gdb-events: object. */
+
+struct gdb_events
+ {
+ gdb_events_breakpoint_create_ftype *breakpoint_create;
+ gdb_events_breakpoint_delete_ftype *breakpoint_delete;
+ gdb_events_breakpoint_modify_ftype *breakpoint_modify;
+ };
+
+
+/* Interface into events functions.
+ Where a *_p() predicate is present, it must called before calling
+ the hook proper. */
+extern void breakpoint_create_event (int b);
+extern void breakpoint_delete_event (int b);
+extern void breakpoint_modify_event (int b);
+
+
+/* When GDB_EVENTS are not being used, completly disable them. */
+
+#if !WITH_GDB_EVENTS
+#define breakpoint_create_event(b) 0
+#define breakpoint_delete_event(b) 0
+#define breakpoint_modify_event(b) 0
+#endif
+
+/* Install custom gdb-events hooks. */
+extern void set_gdb_event_hooks (struct gdb_events *vector);
+
+/* Deliver any pending events. */
+extern void gdb_events_deliver (struct gdb_events *vector);
+
+#if !WITH_GDB_EVENTS
+#define set_gdb_events(x) 0
+#define set_gdb_event_hooks(x) 0
+#define gdb_events_deliver(x) 0
+#endif
+
+#endif
--- /dev/null
+#!/bin/sh
+
+# User Interface Events.
+# Copyright 1999 Free Software Foundation, Inc.
+#
+# Contributed by Cygnus Solutions.
+#
+# This file is part of GDB.
+#
+# This program is free software; you can redistribute it and/or modify
+# it under the terms of the GNU General Public License as published by
+# the Free Software Foundation; either version 2 of the License, or
+# (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
+
+#
+# What happens next:
+#
+
+# The gdb-events.h/gdb-events.c files this script generates are commited
+# and published.
+
+# Any UI module that is installing events is changed so that the
+# events are installed using the ``set_gdb_events()'' and
+# ``gdb_event_hooks()'' interfaces. There could prove to be an issue
+# here with respect to annotate. We might need to accomodate a hook
+# stack that allows several ui blocks to install their own events.
+
+# Each of the variable events (as currently generated) is converteded
+# to either a straight function call or a function call with a
+# predicate.
+
+
+IFS=:
+
+read="class returntype function formal actual attrib"
+
+function_list ()
+{
+ # category:
+ # # -> disable
+ # * -> compatibility - pointer variable that is initialized
+ # by set_gdb_events().
+ # ? -> Predicate and function proper.
+ # f -> always call (must have a void returntype)
+ # return-type
+ # name
+ # formal argument list
+ # actual argument list
+ # attributes
+ # description
+ cat <<EOF |
+f:void:breakpoint_create:int b:b
+f:void:breakpoint_delete:int b:b
+f:void:breakpoint_modify:int b:b
+#*:void:annotate_starting_hook:void
+#*:void:annotate_stopped_hook:void
+#*:void:annotate_signalled_hook:void
+#*:void:annotate_signal_hook:void
+#*:void:annotate_exited_hook:void
+##*:void:print_register_hook:int
+##*:CORE_ADDR:find_toc_address_hook:CORE_ADDR
+##*:void:sparc_print_register_hook:int regno:regno
+#*:void:target_resume_hook:void
+#*:void:target_wait_loop_hook:void
+#*:void:init_gdb_hook:char *argv0:argv0
+#*:void:command_loop_hook:void
+#*:void:fputs_unfiltered_hook:const char *linebuff,GDB_FILE *stream:linebuff, stream
+#*:void:print_frame_info_listing_hook:struct symtab *s, int line, int stopline, int noerror:s, line, stopline, noerror
+#*:int:query_hook:const char *query, va_list args:query, args
+#*:void:warning_hook:const char *string, va_list args:string, args
+#*:void:flush_hook:GDB_FILE *stream:stream
+#*:void:target_output_hook:char *b:b
+#*:void:interactive_hook:void
+#*:void:registers_changed_hook:void
+#*:void:readline_begin_hook:char *format, ...:format
+#*:char *:readline_hook:char *prompt:prompt
+#*:void:readline_end_hook:void
+#*:void:register_changed_hook:int regno:regno
+#*:void:memory_changed_hook:CORE_ADDR addr, int len:addr, len
+#*:void:context_hook:int num:num
+#*:int:target_wait_hook:int pid, struct target_waitstatus *status:pid, status
+#*:void:call_command_hook:struct cmd_list_element *c, char *cmd, int from_tty:c, cmd, from_tty
+#*:NORETURN void:error_hook:void:: ATTR_NORETURN
+#*:void:error_begin_hook:void
+##*:int:target_architecture_hook:const struct bfd_arch_info *
+#*:void:exec_file_display_hook:char *filename:filename
+#*:void:file_changed_hook:char *filename:filename
+##*:void:specify_exec_file_hook:
+#*:int:gdb_load_progress_hook:char *section, unsigned long num:section, num
+#*:void:pre_add_symbol_hook:char *name:name
+#*:void:post_add_symbol_hook:void
+#*:void:selected_frame_level_changed_hook:int level:level
+#*:int:gdb_loop_hook:int signo:signo
+##*:void:solib_create_inferior_hook:void
+##*:void:xcoff_relocate_symtab_hook:unsigned int
+EOF
+ grep -v '^#'
+}
+
+copyright ()
+{
+ cat <<EOF
+/* User Interface Events.
+ Copyright 1999 Free Software Foundation, Inc.
+
+ Contributed by Cygnus Solutions.
+
+This file is part of GDB.
+
+This program is free software; you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation; either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program; if not, write to the Free Software
+Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. */
+
+/* Work in progress */
+
+/* This file was created with the aid of \`\`gdb-events.sh''.
+
+ The bourn shell script \`\`gdb-events.sh'' creates the files
+ \`\`new-gdb-events.c'' and \`\`new-gdb-events.h and then compares
+ them against the existing \`\`gdb-events.[hc]''. Any differences
+ found being reported.
+
+ If editing this file, please also run gdb-events.sh and merge any
+ changes into that script. Conversely, when making sweeping changes
+ to this file, modifying gdb-events.sh and using its output may
+ prove easier. */
+
+EOF
+}
+
+#
+# The .h file
+#
+
+exec > new-gdb-events.h
+copyright
+cat <<EOF
+
+#ifndef GDB_EVENTS_H
+#define GDB_EVENTS_H
+
+#ifndef WITH_GDB_EVENTS
+#define WITH_GDB_EVENTS 1
+#endif
+EOF
+
+# pointer declarations
+echo ""
+echo ""
+cat <<EOF
+/* COMPAT: pointer variables for old, unconverted events.
+ A call to set_gdb_events() will automatically update these. */
+EOF
+echo ""
+function_list | while eval read $read
+do
+ case "${class}" in
+ "*" )
+ echo "extern ${returntype} (*${function}_event) (${formal})${attrib};"
+ ;;
+ esac
+done
+
+# function typedef's
+echo ""
+echo ""
+cat <<EOF
+/* Type definition of all hook functions.
+ Recommended pratice is to first declare each hook function using
+ the below ftype and then define it. */
+EOF
+echo ""
+function_list | while eval read $read
+do
+ echo "typedef ${returntype} (gdb_events_${function}_ftype) (${formal});"
+done
+
+# gdb_events object
+echo ""
+echo ""
+cat <<EOF
+/* gdb-events: object. */
+EOF
+echo ""
+echo "struct gdb_events"
+echo " {"
+function_list | while eval read $read
+do
+ echo " gdb_events_${function}_ftype *${function}${attrib};"
+done
+echo " };"
+
+# function declarations
+echo ""
+echo ""
+cat <<EOF
+/* Interface into events functions.
+ Where a *_p() predicate is present, it must called before calling
+ the hook proper. */
+EOF
+function_list | while eval read $read
+do
+ case "${class}" in
+ "*" ) continue ;;
+ "?" )
+ echo "extern int ${function}_p (void);"
+ echo "extern ${returntype} ${function}_event (${formal})${attrib};"
+ ;;
+ "f" )
+ echo "extern ${returntype} ${function}_event (${formal})${attrib};"
+ ;;
+ esac
+done
+
+# function macros
+echo ""
+echo ""
+cat <<EOF
+/* When GDB_EVENTS are not being used, completly disable them. */
+EOF
+echo ""
+echo "#if !WITH_GDB_EVENTS"
+function_list | while eval read $read
+do
+ case "${class}" in
+ "*" ) continue ;;
+ "?" )
+ echo "#define ${function}_event_p() 0"
+ echo "#define ${function}_event(${actual}) 0"
+ ;;
+ "f" )
+ echo "#define ${function}_event(${actual}) 0"
+ ;;
+ esac
+done
+echo "#endif"
+
+# our set function
+cat <<EOF
+
+/* Install custom gdb-events hooks. */
+extern void set_gdb_event_hooks (struct gdb_events *vector);
+
+/* Deliver any pending events. */
+extern void gdb_events_deliver (struct gdb_events *vector);
+
+#if !WITH_GDB_EVENTS
+#define set_gdb_events(x) 0
+#define set_gdb_event_hooks(x) 0
+#define gdb_events_deliver(x) 0
+#endif
+EOF
+
+# close it off
+echo ""
+echo "#endif"
+exec 1>&2
+#../move-if-change new-gdb-events.h gdb-events.h
+if ! test -r gdb-events.h
+then
+ echo "File missing? mv new-gdb-events.h gdb-events.h" 1>&2
+elif ! diff -c gdb-events.h new-gdb-events.h
+then
+ echo "gdb-events.h changed? cp new-gdb-events.h gdb-events.h" 1>&2
+fi
+
+
+
+#
+# C file
+#
+
+exec > new-gdb-events.c
+copyright
+cat <<EOF
+
+#include "defs.h"
+#include "gdb-events.h"
+#include "gdbcmd.h"
+
+#undef XMALLOC
+#define XMALLOC(TYPE) ((TYPE*) xmalloc (sizeof (TYPE)))
+
+#if WITH_GDB_EVENTS
+static struct gdb_events null_event_hooks;
+static struct gdb_events queue_event_hooks;
+static struct gdb_events *current_event_hooks = &null_event_hooks;
+#endif
+
+int gdb_events_debug;
+EOF
+
+# global pointer variables - always have this
+#echo ""
+#function_list | while eval read $read
+#do
+# case "${class}" in
+# "*" )
+# echo "${returntype} (*${function}_event) (${formal})${attrib} = 0;"
+# ;;
+# esac
+#done
+
+# function bodies
+echo ""
+echo "#if WITH_GDB_EVENTS"
+function_list | while eval read $read
+do
+ case "${class}" in
+ "*" ) continue ;;
+ "?" )
+ echo ""
+ echo "int"
+ echo "${function}_event_p (${formal})"
+ echo "{"
+ echo " return current_event_hooks->${function};"
+ echo "}"
+ echo ""
+ echo "${returntype}"
+ echo "${function}_event (${formal})"
+ echo "{"
+ echo " return current_events->${function} (${actual});"
+ echo "}"
+ ;;
+ "f" )
+ echo ""
+ echo "void"
+ echo "${function}_event (${formal})"
+ echo "{"
+ echo " if (gdb_events_debug)"
+ echo " fprintf_unfiltered (gdb_stdlog, \"${function}_event\\n\");"
+ echo " if (!current_event_hooks->${function})"
+ echo " return;"
+ echo " current_event_hooks->${function} (${actual});"
+ echo "}"
+ ;;
+ esac
+done
+echo ""
+echo "#endif"
+
+# Set hooks function
+echo ""
+cat <<EOF
+#if WITH_GDB_EVENTS
+void
+set_gdb_event_hooks (struct gdb_events *vector)
+{
+ if (vector == NULL)
+ current_event_hooks = &queue_event_hooks;
+ else
+ current_event_hooks = vector;
+EOF
+function_list | while eval read $read
+do
+ case "${class}" in
+ "*" )
+ echo " ${function}_event = hooks->${function};"
+ ;;
+ esac
+done
+cat <<EOF
+}
+#endif
+EOF
+
+# event type
+echo ""
+cat <<EOF
+enum gdb_event
+ {
+EOF
+function_list | while eval read $read
+do
+ case "${class}" in
+ "f" )
+ echo " ${function},"
+ ;;
+ esac
+done
+cat <<EOF
+ nr_gdb_events
+ };
+EOF
+
+# event data
+echo ""
+function_list | while eval read $read
+do
+ case "${class}" in
+ "f" )
+ echo "struct ${function}"
+ echo " {"
+ echo " `echo ${formal} | tr '[,]' '[;]'`;"
+ echo " };"
+ echo ""
+ ;;
+ esac
+done
+
+# event queue
+cat <<EOF
+struct event
+ {
+ enum gdb_event type;
+ struct event *next;
+ union
+ {
+EOF
+function_list | while eval read $read
+do
+ case "${class}" in
+ "f" )
+ echo " struct ${function} ${function};"
+ ;;
+ esac
+done
+cat <<EOF
+ }
+ data;
+ };
+struct event *pending_events;
+struct event *delivering_events;
+EOF
+
+# append
+echo ""
+cat <<EOF
+static void
+append (struct event *new_event)
+{
+ struct event **event = &pending_events;
+ while ((*event) != NULL)
+ event = &((*event)->next);
+ (*event) = new_event;
+ (*event)->next = NULL;
+}
+EOF
+
+# schedule a given event
+function_list | while eval read $read
+do
+ case "${class}" in
+ "f" )
+ echo ""
+ echo "static void"
+ echo "queue_${function} (${formal})"
+ echo "{"
+ echo " struct event *event = XMALLOC (struct event);"
+ echo " event->type = ${function};"
+ for arg in `echo ${actual} | tr '[,]' '[ ]'`; do
+ echo " event->data.${function}.${arg} = ${arg};"
+ done
+ echo " append (event);"
+ echo "}"
+ ;;
+ esac
+done
+
+# deliver
+echo ""
+cat <<EOF
+void
+gdb_events_deliver (struct gdb_events *vector)
+{
+ /* Just zap any events left around from last time. */
+ while (delivering_events != NULL)
+ {
+ struct event *event = delivering_events;
+ delivering_events = event->next;
+ free (event);
+ }
+ /* Process any pending events. Because one of the deliveries could
+ bail out we move everything off of the pending queue onto an
+ in-progress queue where it can, later, be cleaned up if
+ necessary. */
+ delivering_events = pending_events;
+ pending_events = NULL;
+ while (delivering_events != NULL)
+ {
+ struct event *event = delivering_events;
+ switch (event->type)
+ {
+EOF
+function_list | while eval read $read
+do
+ case "${class}" in
+ "f" )
+ echo " case ${function}:"
+ echo " vector->${function}"
+ sep=" ("
+ ass=""
+ for arg in `echo ${actual} | tr '[,]' '[ ]'`; do
+ ass="${ass}${sep}event->data.${function}.${arg}"
+ sep=",
+ "
+ done
+ echo "${ass});"
+ echo " break;"
+ ;;
+ esac
+done
+cat <<EOF
+ }
+ delivering_events = event->next;
+ free (event);
+ }
+}
+EOF
+
+# Finally the initialization
+echo ""
+cat <<EOF
+void _initialize_gdb_events (void);
+void
+_initialize_gdb_events (void)
+{
+#if WITH_GDB_EVENTS
+EOF
+function_list | while eval read $read
+do
+ case "${class}" in
+ "f" )
+ echo " queue_event_hooks.${function} = queue_${function};"
+ ;;
+ esac
+done
+cat <<EOF
+#endif
+ add_show_from_set (add_set_cmd ("eventdebug",
+ class_maintenance,
+ var_zinteger,
+ (char *)&gdb_events_debug,
+ "Set event debugging.\n\\
+When non-zero, event/notify debugging is enabled.", &setlist),
+ &showlist);
+}
+EOF
+
+# close things off
+exec 1>&2
+#../move-if-change new-gdb-events.c gdb-events.c
+if ! test -r gdb-events.c
+then
+ echo "File missing? mv new-gdb-events.c gdb-events.c" 1>&2
+elif ! diff -c gdb-events.c new-gdb-events.c
+then
+ echo "gdb-events.c changed? cp new-gdb-events.c gdb-events.c" 1>&2
+fi
Foundation, Inc., 59 Temple Place - Suite 330,
Boston, MA 02111-1307, USA. */
-/* *INDENT-OFF* */ /* typedef (f)();'' confuses indent */
+/* *INDENT-OFF* */ /* ``typedef (f)();'' confuses indent */
+
+/* This file was created with the aid of ``gdbarch.sh''.
+
+ The bourn shell script ``gdbarch.sh'' creates the files
+ ``new-gdbarch.c'' and ``new-gdbarch.h and then compares them
+ against the existing ``gdbarch.[hc]''. Any differences found
+ being reported.
+
+ If editing this file, please also run gdbarch.sh and merge any
+ changes into that script. Conversely, when makeing sweeping changes
+ to this file, modifying gdbarch.sh and using its output may prove
+ easier. */
#include "defs.h"
#include "symcat.h"
+/* Static function declarations */
+
+static void verify_gdbarch (struct gdbarch *gdbarch);
+static void init_gdbarch_data (struct gdbarch *);
+static void init_gdbarch_swap (struct gdbarch *);
+static void swapout_gdbarch_swap (struct gdbarch *);
+static void swapin_gdbarch_swap (struct gdbarch *);
+
/* Convenience macro for allocting typesafe memory. */
#ifndef XMALLOC
``struct gdbarch_info''. */
struct gdbarch *
-gdbarch_alloc (info, tdep)
- const struct gdbarch_info *info;
- struct gdbarch_tdep *tdep;
+gdbarch_alloc (const struct gdbarch_info *info,
+ struct gdbarch_tdep *tdep)
{
struct gdbarch *gdbarch = XMALLOC (struct gdbarch);
memset (gdbarch, 0, sizeof (*gdbarch));
/* Ensure that all values in a GDBARCH are reasonable. */
-static void verify_gdbarch PARAMS ((struct gdbarch *gdbarch));
static void
-verify_gdbarch (gdbarch)
- struct gdbarch *gdbarch;
+verify_gdbarch (struct gdbarch *gdbarch)
{
/* Only perform sanity checks on a multi-arch target. */
if (GDB_MULTI_ARCH <= 0)
/* Print out the details of the current architecture. */
void
-gdbarch_dump ()
+gdbarch_dump (void)
{
if (TARGET_ARCHITECTURE != NULL)
fprintf_unfiltered (gdb_stdlog,
}
struct gdbarch_tdep *
-gdbarch_tdep (gdbarch)
- struct gdbarch *gdbarch;
+gdbarch_tdep (struct gdbarch *gdbarch)
{
if (gdbarch_debug >= 2)
/* FIXME: gdb_std??? */
const struct bfd_arch_info *
-gdbarch_bfd_arch_info (gdbarch)
- struct gdbarch *gdbarch;
+gdbarch_bfd_arch_info (struct gdbarch *gdbarch)
{
if (gdbarch_debug >= 2)
/* FIXME: gdb_std??? */
}
int
-gdbarch_byte_order (gdbarch)
- struct gdbarch *gdbarch;
+gdbarch_byte_order (struct gdbarch *gdbarch)
{
if (gdbarch_debug >= 2)
/* FIXME: gdb_std??? */
}
int
-gdbarch_ptr_bit (gdbarch)
- struct gdbarch *gdbarch;
+gdbarch_ptr_bit (struct gdbarch *gdbarch)
{
if (gdbarch->ptr_bit == 0)
internal_error ("gdbarch: gdbarch_ptr_bit invalid");
}
void
-set_gdbarch_ptr_bit (gdbarch, ptr_bit)
- struct gdbarch *gdbarch;
- int ptr_bit;
+set_gdbarch_ptr_bit (struct gdbarch *gdbarch,
+ int ptr_bit)
{
gdbarch->ptr_bit = ptr_bit;
}
int
-gdbarch_short_bit (gdbarch)
- struct gdbarch *gdbarch;
+gdbarch_short_bit (struct gdbarch *gdbarch)
{
if (gdbarch->short_bit == 0)
internal_error ("gdbarch: gdbarch_short_bit invalid");
}
void
-set_gdbarch_short_bit (gdbarch, short_bit)
- struct gdbarch *gdbarch;
- int short_bit;
+set_gdbarch_short_bit (struct gdbarch *gdbarch,
+ int short_bit)
{
gdbarch->short_bit = short_bit;
}
int
-gdbarch_int_bit (gdbarch)
- struct gdbarch *gdbarch;
+gdbarch_int_bit (struct gdbarch *gdbarch)
{
if (gdbarch->int_bit == 0)
internal_error ("gdbarch: gdbarch_int_bit invalid");
}
void
-set_gdbarch_int_bit (gdbarch, int_bit)
- struct gdbarch *gdbarch;
- int int_bit;
+set_gdbarch_int_bit (struct gdbarch *gdbarch,
+ int int_bit)
{
gdbarch->int_bit = int_bit;
}
int
-gdbarch_long_bit (gdbarch)
- struct gdbarch *gdbarch;
+gdbarch_long_bit (struct gdbarch *gdbarch)
{
if (gdbarch->long_bit == 0)
internal_error ("gdbarch: gdbarch_long_bit invalid");
}
void
-set_gdbarch_long_bit (gdbarch, long_bit)
- struct gdbarch *gdbarch;
- int long_bit;
+set_gdbarch_long_bit (struct gdbarch *gdbarch,
+ int long_bit)
{
gdbarch->long_bit = long_bit;
}
int
-gdbarch_long_long_bit (gdbarch)
- struct gdbarch *gdbarch;
+gdbarch_long_long_bit (struct gdbarch *gdbarch)
{
if (gdbarch->long_long_bit == 0)
internal_error ("gdbarch: gdbarch_long_long_bit invalid");
}
void
-set_gdbarch_long_long_bit (gdbarch, long_long_bit)
- struct gdbarch *gdbarch;
- int long_long_bit;
+set_gdbarch_long_long_bit (struct gdbarch *gdbarch,
+ int long_long_bit)
{
gdbarch->long_long_bit = long_long_bit;
}
int
-gdbarch_float_bit (gdbarch)
- struct gdbarch *gdbarch;
+gdbarch_float_bit (struct gdbarch *gdbarch)
{
if (gdbarch->float_bit == 0)
internal_error ("gdbarch: gdbarch_float_bit invalid");
}
void
-set_gdbarch_float_bit (gdbarch, float_bit)
- struct gdbarch *gdbarch;
- int float_bit;
+set_gdbarch_float_bit (struct gdbarch *gdbarch,
+ int float_bit)
{
gdbarch->float_bit = float_bit;
}
int
-gdbarch_double_bit (gdbarch)
- struct gdbarch *gdbarch;
+gdbarch_double_bit (struct gdbarch *gdbarch)
{
if (gdbarch->double_bit == 0)
internal_error ("gdbarch: gdbarch_double_bit invalid");
}
void
-set_gdbarch_double_bit (gdbarch, double_bit)
- struct gdbarch *gdbarch;
- int double_bit;
+set_gdbarch_double_bit (struct gdbarch *gdbarch,
+ int double_bit)
{
gdbarch->double_bit = double_bit;
}
int
-gdbarch_long_double_bit (gdbarch)
- struct gdbarch *gdbarch;
+gdbarch_long_double_bit (struct gdbarch *gdbarch)
{
if (gdbarch->long_double_bit == 0)
internal_error ("gdbarch: gdbarch_long_double_bit invalid");
}
void
-set_gdbarch_long_double_bit (gdbarch, long_double_bit)
- struct gdbarch *gdbarch;
- int long_double_bit;
+set_gdbarch_long_double_bit (struct gdbarch *gdbarch,
+ int long_double_bit)
{
gdbarch->long_double_bit = long_double_bit;
}
}
void
-set_gdbarch_read_pc (gdbarch, read_pc)
- struct gdbarch *gdbarch;
- gdbarch_read_pc_ftype read_pc;
+set_gdbarch_read_pc (struct gdbarch *gdbarch,
+ gdbarch_read_pc_ftype read_pc)
{
gdbarch->read_pc = read_pc;
}
}
void
-set_gdbarch_write_pc (gdbarch, write_pc)
- struct gdbarch *gdbarch;
- gdbarch_write_pc_ftype write_pc;
+set_gdbarch_write_pc (struct gdbarch *gdbarch,
+ gdbarch_write_pc_ftype write_pc)
{
gdbarch->write_pc = write_pc;
}
}
void
-set_gdbarch_read_fp (gdbarch, read_fp)
- struct gdbarch *gdbarch;
- gdbarch_read_fp_ftype read_fp;
+set_gdbarch_read_fp (struct gdbarch *gdbarch,
+ gdbarch_read_fp_ftype read_fp)
{
gdbarch->read_fp = read_fp;
}
}
void
-set_gdbarch_write_fp (gdbarch, write_fp)
- struct gdbarch *gdbarch;
- gdbarch_write_fp_ftype write_fp;
+set_gdbarch_write_fp (struct gdbarch *gdbarch,
+ gdbarch_write_fp_ftype write_fp)
{
gdbarch->write_fp = write_fp;
}
}
void
-set_gdbarch_read_sp (gdbarch, read_sp)
- struct gdbarch *gdbarch;
- gdbarch_read_sp_ftype read_sp;
+set_gdbarch_read_sp (struct gdbarch *gdbarch,
+ gdbarch_read_sp_ftype read_sp)
{
gdbarch->read_sp = read_sp;
}
}
void
-set_gdbarch_write_sp (gdbarch, write_sp)
- struct gdbarch *gdbarch;
- gdbarch_write_sp_ftype write_sp;
+set_gdbarch_write_sp (struct gdbarch *gdbarch,
+ gdbarch_write_sp_ftype write_sp)
{
gdbarch->write_sp = write_sp;
}
int
-gdbarch_num_regs (gdbarch)
- struct gdbarch *gdbarch;
+gdbarch_num_regs (struct gdbarch *gdbarch)
{
if (gdbarch->num_regs == -1)
internal_error ("gdbarch: gdbarch_num_regs invalid");
}
void
-set_gdbarch_num_regs (gdbarch, num_regs)
- struct gdbarch *gdbarch;
- int num_regs;
+set_gdbarch_num_regs (struct gdbarch *gdbarch,
+ int num_regs)
{
gdbarch->num_regs = num_regs;
}
int
-gdbarch_sp_regnum (gdbarch)
- struct gdbarch *gdbarch;
+gdbarch_sp_regnum (struct gdbarch *gdbarch)
{
if (gdbarch->sp_regnum == -1)
internal_error ("gdbarch: gdbarch_sp_regnum invalid");
}
void
-set_gdbarch_sp_regnum (gdbarch, sp_regnum)
- struct gdbarch *gdbarch;
- int sp_regnum;
+set_gdbarch_sp_regnum (struct gdbarch *gdbarch,
+ int sp_regnum)
{
gdbarch->sp_regnum = sp_regnum;
}
int
-gdbarch_fp_regnum (gdbarch)
- struct gdbarch *gdbarch;
+gdbarch_fp_regnum (struct gdbarch *gdbarch)
{
if (gdbarch->fp_regnum == -1)
internal_error ("gdbarch: gdbarch_fp_regnum invalid");
}
void
-set_gdbarch_fp_regnum (gdbarch, fp_regnum)
- struct gdbarch *gdbarch;
- int fp_regnum;
+set_gdbarch_fp_regnum (struct gdbarch *gdbarch,
+ int fp_regnum)
{
gdbarch->fp_regnum = fp_regnum;
}
int
-gdbarch_pc_regnum (gdbarch)
- struct gdbarch *gdbarch;
+gdbarch_pc_regnum (struct gdbarch *gdbarch)
{
if (gdbarch->pc_regnum == -1)
internal_error ("gdbarch: gdbarch_pc_regnum invalid");
}
void
-set_gdbarch_pc_regnum (gdbarch, pc_regnum)
- struct gdbarch *gdbarch;
- int pc_regnum;
+set_gdbarch_pc_regnum (struct gdbarch *gdbarch,
+ int pc_regnum)
{
gdbarch->pc_regnum = pc_regnum;
}
}
void
-set_gdbarch_register_name (gdbarch, register_name)
- struct gdbarch *gdbarch;
- gdbarch_register_name_ftype register_name;
+set_gdbarch_register_name (struct gdbarch *gdbarch,
+ gdbarch_register_name_ftype register_name)
{
gdbarch->register_name = register_name;
}
int
-gdbarch_register_size (gdbarch)
- struct gdbarch *gdbarch;
+gdbarch_register_size (struct gdbarch *gdbarch)
{
if (gdbarch->register_size == -1)
internal_error ("gdbarch: gdbarch_register_size invalid");
}
void
-set_gdbarch_register_size (gdbarch, register_size)
- struct gdbarch *gdbarch;
- int register_size;
+set_gdbarch_register_size (struct gdbarch *gdbarch,
+ int register_size)
{
gdbarch->register_size = register_size;
}
int
-gdbarch_register_bytes (gdbarch)
- struct gdbarch *gdbarch;
+gdbarch_register_bytes (struct gdbarch *gdbarch)
{
if (gdbarch->register_bytes == -1)
internal_error ("gdbarch: gdbarch_register_bytes invalid");
}
void
-set_gdbarch_register_bytes (gdbarch, register_bytes)
- struct gdbarch *gdbarch;
- int register_bytes;
+set_gdbarch_register_bytes (struct gdbarch *gdbarch,
+ int register_bytes)
{
gdbarch->register_bytes = register_bytes;
}
}
void
-set_gdbarch_register_byte (gdbarch, register_byte)
- struct gdbarch *gdbarch;
- gdbarch_register_byte_ftype register_byte;
+set_gdbarch_register_byte (struct gdbarch *gdbarch,
+ gdbarch_register_byte_ftype register_byte)
{
gdbarch->register_byte = register_byte;
}
}
void
-set_gdbarch_register_raw_size (gdbarch, register_raw_size)
- struct gdbarch *gdbarch;
- gdbarch_register_raw_size_ftype register_raw_size;
+set_gdbarch_register_raw_size (struct gdbarch *gdbarch,
+ gdbarch_register_raw_size_ftype register_raw_size)
{
gdbarch->register_raw_size = register_raw_size;
}
int
-gdbarch_max_register_raw_size (gdbarch)
- struct gdbarch *gdbarch;
+gdbarch_max_register_raw_size (struct gdbarch *gdbarch)
{
if (gdbarch->max_register_raw_size == -1)
internal_error ("gdbarch: gdbarch_max_register_raw_size invalid");
}
void
-set_gdbarch_max_register_raw_size (gdbarch, max_register_raw_size)
- struct gdbarch *gdbarch;
- int max_register_raw_size;
+set_gdbarch_max_register_raw_size (struct gdbarch *gdbarch,
+ int max_register_raw_size)
{
gdbarch->max_register_raw_size = max_register_raw_size;
}
}
void
-set_gdbarch_register_virtual_size (gdbarch, register_virtual_size)
- struct gdbarch *gdbarch;
- gdbarch_register_virtual_size_ftype register_virtual_size;
+set_gdbarch_register_virtual_size (struct gdbarch *gdbarch,
+ gdbarch_register_virtual_size_ftype register_virtual_size)
{
gdbarch->register_virtual_size = register_virtual_size;
}
int
-gdbarch_max_register_virtual_size (gdbarch)
- struct gdbarch *gdbarch;
+gdbarch_max_register_virtual_size (struct gdbarch *gdbarch)
{
if (gdbarch->max_register_virtual_size == -1)
internal_error ("gdbarch: gdbarch_max_register_virtual_size invalid");
}
void
-set_gdbarch_max_register_virtual_size (gdbarch, max_register_virtual_size)
- struct gdbarch *gdbarch;
- int max_register_virtual_size;
+set_gdbarch_max_register_virtual_size (struct gdbarch *gdbarch,
+ int max_register_virtual_size)
{
gdbarch->max_register_virtual_size = max_register_virtual_size;
}
}
void
-set_gdbarch_register_virtual_type (gdbarch, register_virtual_type)
- struct gdbarch *gdbarch;
- gdbarch_register_virtual_type_ftype register_virtual_type;
+set_gdbarch_register_virtual_type (struct gdbarch *gdbarch,
+ gdbarch_register_virtual_type_ftype register_virtual_type)
{
gdbarch->register_virtual_type = register_virtual_type;
}
int
-gdbarch_use_generic_dummy_frames (gdbarch)
- struct gdbarch *gdbarch;
+gdbarch_use_generic_dummy_frames (struct gdbarch *gdbarch)
{
if (gdbarch->use_generic_dummy_frames == -1)
internal_error ("gdbarch: gdbarch_use_generic_dummy_frames invalid");
}
void
-set_gdbarch_use_generic_dummy_frames (gdbarch, use_generic_dummy_frames)
- struct gdbarch *gdbarch;
- int use_generic_dummy_frames;
+set_gdbarch_use_generic_dummy_frames (struct gdbarch *gdbarch,
+ int use_generic_dummy_frames)
{
gdbarch->use_generic_dummy_frames = use_generic_dummy_frames;
}
int
-gdbarch_call_dummy_location (gdbarch)
- struct gdbarch *gdbarch;
+gdbarch_call_dummy_location (struct gdbarch *gdbarch)
{
if (gdbarch->call_dummy_location == 0)
internal_error ("gdbarch: gdbarch_call_dummy_location invalid");
}
void
-set_gdbarch_call_dummy_location (gdbarch, call_dummy_location)
- struct gdbarch *gdbarch;
- int call_dummy_location;
+set_gdbarch_call_dummy_location (struct gdbarch *gdbarch,
+ int call_dummy_location)
{
gdbarch->call_dummy_location = call_dummy_location;
}
}
void
-set_gdbarch_call_dummy_address (gdbarch, call_dummy_address)
- struct gdbarch *gdbarch;
- gdbarch_call_dummy_address_ftype call_dummy_address;
+set_gdbarch_call_dummy_address (struct gdbarch *gdbarch,
+ gdbarch_call_dummy_address_ftype call_dummy_address)
{
gdbarch->call_dummy_address = call_dummy_address;
}
CORE_ADDR
-gdbarch_call_dummy_start_offset (gdbarch)
- struct gdbarch *gdbarch;
+gdbarch_call_dummy_start_offset (struct gdbarch *gdbarch)
{
if (gdbarch->call_dummy_start_offset == -1)
internal_error ("gdbarch: gdbarch_call_dummy_start_offset invalid");
}
void
-set_gdbarch_call_dummy_start_offset (gdbarch, call_dummy_start_offset)
- struct gdbarch *gdbarch;
- CORE_ADDR call_dummy_start_offset;
+set_gdbarch_call_dummy_start_offset (struct gdbarch *gdbarch,
+ CORE_ADDR call_dummy_start_offset)
{
gdbarch->call_dummy_start_offset = call_dummy_start_offset;
}
CORE_ADDR
-gdbarch_call_dummy_breakpoint_offset (gdbarch)
- struct gdbarch *gdbarch;
+gdbarch_call_dummy_breakpoint_offset (struct gdbarch *gdbarch)
{
if (gdbarch->call_dummy_breakpoint_offset == -1)
internal_error ("gdbarch: gdbarch_call_dummy_breakpoint_offset invalid");
}
void
-set_gdbarch_call_dummy_breakpoint_offset (gdbarch, call_dummy_breakpoint_offset)
- struct gdbarch *gdbarch;
- CORE_ADDR call_dummy_breakpoint_offset;
+set_gdbarch_call_dummy_breakpoint_offset (struct gdbarch *gdbarch,
+ CORE_ADDR call_dummy_breakpoint_offset)
{
gdbarch->call_dummy_breakpoint_offset = call_dummy_breakpoint_offset;
}
int
-gdbarch_call_dummy_breakpoint_offset_p (gdbarch)
- struct gdbarch *gdbarch;
+gdbarch_call_dummy_breakpoint_offset_p (struct gdbarch *gdbarch)
{
if (gdbarch->call_dummy_breakpoint_offset_p == -1)
internal_error ("gdbarch: gdbarch_call_dummy_breakpoint_offset_p invalid");
}
void
-set_gdbarch_call_dummy_breakpoint_offset_p (gdbarch, call_dummy_breakpoint_offset_p)
- struct gdbarch *gdbarch;
- int call_dummy_breakpoint_offset_p;
+set_gdbarch_call_dummy_breakpoint_offset_p (struct gdbarch *gdbarch,
+ int call_dummy_breakpoint_offset_p)
{
gdbarch->call_dummy_breakpoint_offset_p = call_dummy_breakpoint_offset_p;
}
int
-gdbarch_call_dummy_length (gdbarch)
- struct gdbarch *gdbarch;
+gdbarch_call_dummy_length (struct gdbarch *gdbarch)
{
if (gdbarch->call_dummy_length == -1)
internal_error ("gdbarch: gdbarch_call_dummy_length invalid");
}
void
-set_gdbarch_call_dummy_length (gdbarch, call_dummy_length)
- struct gdbarch *gdbarch;
- int call_dummy_length;
+set_gdbarch_call_dummy_length (struct gdbarch *gdbarch,
+ int call_dummy_length)
{
gdbarch->call_dummy_length = call_dummy_length;
}
}
void
-set_gdbarch_pc_in_call_dummy (gdbarch, pc_in_call_dummy)
- struct gdbarch *gdbarch;
- gdbarch_pc_in_call_dummy_ftype pc_in_call_dummy;
+set_gdbarch_pc_in_call_dummy (struct gdbarch *gdbarch,
+ gdbarch_pc_in_call_dummy_ftype pc_in_call_dummy)
{
gdbarch->pc_in_call_dummy = pc_in_call_dummy;
}
int
-gdbarch_call_dummy_p (gdbarch)
- struct gdbarch *gdbarch;
+gdbarch_call_dummy_p (struct gdbarch *gdbarch)
{
if (gdbarch->call_dummy_p == -1)
internal_error ("gdbarch: gdbarch_call_dummy_p invalid");
}
void
-set_gdbarch_call_dummy_p (gdbarch, call_dummy_p)
- struct gdbarch *gdbarch;
- int call_dummy_p;
+set_gdbarch_call_dummy_p (struct gdbarch *gdbarch,
+ int call_dummy_p)
{
gdbarch->call_dummy_p = call_dummy_p;
}
LONGEST *
-gdbarch_call_dummy_words (gdbarch)
- struct gdbarch *gdbarch;
+gdbarch_call_dummy_words (struct gdbarch *gdbarch)
{
if (gdbarch_debug >= 2)
/* FIXME: gdb_std??? */
}
void
-set_gdbarch_call_dummy_words (gdbarch, call_dummy_words)
- struct gdbarch *gdbarch;
- LONGEST * call_dummy_words;
+set_gdbarch_call_dummy_words (struct gdbarch *gdbarch,
+ LONGEST * call_dummy_words)
{
gdbarch->call_dummy_words = call_dummy_words;
}
int
-gdbarch_sizeof_call_dummy_words (gdbarch)
- struct gdbarch *gdbarch;
+gdbarch_sizeof_call_dummy_words (struct gdbarch *gdbarch)
{
if (gdbarch_debug >= 2)
/* FIXME: gdb_std??? */
}
void
-set_gdbarch_sizeof_call_dummy_words (gdbarch, sizeof_call_dummy_words)
- struct gdbarch *gdbarch;
- int sizeof_call_dummy_words;
+set_gdbarch_sizeof_call_dummy_words (struct gdbarch *gdbarch,
+ int sizeof_call_dummy_words)
{
gdbarch->sizeof_call_dummy_words = sizeof_call_dummy_words;
}
int
-gdbarch_call_dummy_stack_adjust_p (gdbarch)
- struct gdbarch *gdbarch;
+gdbarch_call_dummy_stack_adjust_p (struct gdbarch *gdbarch)
{
if (gdbarch->call_dummy_stack_adjust_p == -1)
internal_error ("gdbarch: gdbarch_call_dummy_stack_adjust_p invalid");
}
void
-set_gdbarch_call_dummy_stack_adjust_p (gdbarch, call_dummy_stack_adjust_p)
- struct gdbarch *gdbarch;
- int call_dummy_stack_adjust_p;
+set_gdbarch_call_dummy_stack_adjust_p (struct gdbarch *gdbarch,
+ int call_dummy_stack_adjust_p)
{
gdbarch->call_dummy_stack_adjust_p = call_dummy_stack_adjust_p;
}
int
-gdbarch_call_dummy_stack_adjust (gdbarch)
- struct gdbarch *gdbarch;
+gdbarch_call_dummy_stack_adjust (struct gdbarch *gdbarch)
{
if (gdbarch->call_dummy_stack_adjust_p && gdbarch->call_dummy_stack_adjust == 0)
internal_error ("gdbarch: gdbarch_call_dummy_stack_adjust invalid");
}
void
-set_gdbarch_call_dummy_stack_adjust (gdbarch, call_dummy_stack_adjust)
- struct gdbarch *gdbarch;
- int call_dummy_stack_adjust;
+set_gdbarch_call_dummy_stack_adjust (struct gdbarch *gdbarch,
+ int call_dummy_stack_adjust)
{
gdbarch->call_dummy_stack_adjust = call_dummy_stack_adjust;
}
}
void
-set_gdbarch_fix_call_dummy (gdbarch, fix_call_dummy)
- struct gdbarch *gdbarch;
- gdbarch_fix_call_dummy_ftype fix_call_dummy;
+set_gdbarch_fix_call_dummy (struct gdbarch *gdbarch,
+ gdbarch_fix_call_dummy_ftype fix_call_dummy)
{
gdbarch->fix_call_dummy = fix_call_dummy;
}
int
-gdbarch_believe_pcc_promotion (gdbarch)
- struct gdbarch *gdbarch;
+gdbarch_believe_pcc_promotion (struct gdbarch *gdbarch)
{
if (gdbarch_debug >= 2)
/* FIXME: gdb_std??? */
}
void
-set_gdbarch_believe_pcc_promotion (gdbarch, believe_pcc_promotion)
- struct gdbarch *gdbarch;
- int believe_pcc_promotion;
+set_gdbarch_believe_pcc_promotion (struct gdbarch *gdbarch,
+ int believe_pcc_promotion)
{
gdbarch->believe_pcc_promotion = believe_pcc_promotion;
}
int
-gdbarch_believe_pcc_promotion_type (gdbarch)
- struct gdbarch *gdbarch;
+gdbarch_believe_pcc_promotion_type (struct gdbarch *gdbarch)
{
if (gdbarch_debug >= 2)
/* FIXME: gdb_std??? */
}
void
-set_gdbarch_believe_pcc_promotion_type (gdbarch, believe_pcc_promotion_type)
- struct gdbarch *gdbarch;
- int believe_pcc_promotion_type;
+set_gdbarch_believe_pcc_promotion_type (struct gdbarch *gdbarch,
+ int believe_pcc_promotion_type)
{
gdbarch->believe_pcc_promotion_type = believe_pcc_promotion_type;
}
}
void
-set_gdbarch_get_saved_register (gdbarch, get_saved_register)
- struct gdbarch *gdbarch;
- gdbarch_get_saved_register_ftype get_saved_register;
+set_gdbarch_get_saved_register (struct gdbarch *gdbarch,
+ gdbarch_get_saved_register_ftype get_saved_register)
{
gdbarch->get_saved_register = get_saved_register;
}
}
void
-set_gdbarch_register_convertible (gdbarch, register_convertible)
- struct gdbarch *gdbarch;
- gdbarch_register_convertible_ftype register_convertible;
+set_gdbarch_register_convertible (struct gdbarch *gdbarch,
+ gdbarch_register_convertible_ftype register_convertible)
{
gdbarch->register_convertible = register_convertible;
}
}
void
-set_gdbarch_register_convert_to_virtual (gdbarch, register_convert_to_virtual)
- struct gdbarch *gdbarch;
- gdbarch_register_convert_to_virtual_ftype register_convert_to_virtual;
+set_gdbarch_register_convert_to_virtual (struct gdbarch *gdbarch,
+ gdbarch_register_convert_to_virtual_ftype register_convert_to_virtual)
{
gdbarch->register_convert_to_virtual = register_convert_to_virtual;
}
}
void
-set_gdbarch_register_convert_to_raw (gdbarch, register_convert_to_raw)
- struct gdbarch *gdbarch;
- gdbarch_register_convert_to_raw_ftype register_convert_to_raw;
+set_gdbarch_register_convert_to_raw (struct gdbarch *gdbarch,
+ gdbarch_register_convert_to_raw_ftype register_convert_to_raw)
{
gdbarch->register_convert_to_raw = register_convert_to_raw;
}
}
void
-set_gdbarch_extract_return_value (gdbarch, extract_return_value)
- struct gdbarch *gdbarch;
- gdbarch_extract_return_value_ftype extract_return_value;
+set_gdbarch_extract_return_value (struct gdbarch *gdbarch,
+ gdbarch_extract_return_value_ftype extract_return_value)
{
gdbarch->extract_return_value = extract_return_value;
}
}
void
-set_gdbarch_push_arguments (gdbarch, push_arguments)
- struct gdbarch *gdbarch;
- gdbarch_push_arguments_ftype push_arguments;
+set_gdbarch_push_arguments (struct gdbarch *gdbarch,
+ gdbarch_push_arguments_ftype push_arguments)
{
gdbarch->push_arguments = push_arguments;
}
}
void
-set_gdbarch_push_dummy_frame (gdbarch, push_dummy_frame)
- struct gdbarch *gdbarch;
- gdbarch_push_dummy_frame_ftype push_dummy_frame;
+set_gdbarch_push_dummy_frame (struct gdbarch *gdbarch,
+ gdbarch_push_dummy_frame_ftype push_dummy_frame)
{
gdbarch->push_dummy_frame = push_dummy_frame;
}
}
void
-set_gdbarch_push_return_address (gdbarch, push_return_address)
- struct gdbarch *gdbarch;
- gdbarch_push_return_address_ftype push_return_address;
+set_gdbarch_push_return_address (struct gdbarch *gdbarch,
+ gdbarch_push_return_address_ftype push_return_address)
{
gdbarch->push_return_address = push_return_address;
}
}
void
-set_gdbarch_pop_frame (gdbarch, pop_frame)
- struct gdbarch *gdbarch;
- gdbarch_pop_frame_ftype pop_frame;
+set_gdbarch_pop_frame (struct gdbarch *gdbarch,
+ gdbarch_pop_frame_ftype pop_frame)
{
gdbarch->pop_frame = pop_frame;
}
}
void
-set_gdbarch_d10v_make_daddr (gdbarch, d10v_make_daddr)
- struct gdbarch *gdbarch;
- gdbarch_d10v_make_daddr_ftype d10v_make_daddr;
+set_gdbarch_d10v_make_daddr (struct gdbarch *gdbarch,
+ gdbarch_d10v_make_daddr_ftype d10v_make_daddr)
{
gdbarch->d10v_make_daddr = d10v_make_daddr;
}
}
void
-set_gdbarch_d10v_make_iaddr (gdbarch, d10v_make_iaddr)
- struct gdbarch *gdbarch;
- gdbarch_d10v_make_iaddr_ftype d10v_make_iaddr;
+set_gdbarch_d10v_make_iaddr (struct gdbarch *gdbarch,
+ gdbarch_d10v_make_iaddr_ftype d10v_make_iaddr)
{
gdbarch->d10v_make_iaddr = d10v_make_iaddr;
}
}
void
-set_gdbarch_d10v_daddr_p (gdbarch, d10v_daddr_p)
- struct gdbarch *gdbarch;
- gdbarch_d10v_daddr_p_ftype d10v_daddr_p;
+set_gdbarch_d10v_daddr_p (struct gdbarch *gdbarch,
+ gdbarch_d10v_daddr_p_ftype d10v_daddr_p)
{
gdbarch->d10v_daddr_p = d10v_daddr_p;
}
}
void
-set_gdbarch_d10v_iaddr_p (gdbarch, d10v_iaddr_p)
- struct gdbarch *gdbarch;
- gdbarch_d10v_iaddr_p_ftype d10v_iaddr_p;
+set_gdbarch_d10v_iaddr_p (struct gdbarch *gdbarch,
+ gdbarch_d10v_iaddr_p_ftype d10v_iaddr_p)
{
gdbarch->d10v_iaddr_p = d10v_iaddr_p;
}
}
void
-set_gdbarch_d10v_convert_daddr_to_raw (gdbarch, d10v_convert_daddr_to_raw)
- struct gdbarch *gdbarch;
- gdbarch_d10v_convert_daddr_to_raw_ftype d10v_convert_daddr_to_raw;
+set_gdbarch_d10v_convert_daddr_to_raw (struct gdbarch *gdbarch,
+ gdbarch_d10v_convert_daddr_to_raw_ftype d10v_convert_daddr_to_raw)
{
gdbarch->d10v_convert_daddr_to_raw = d10v_convert_daddr_to_raw;
}
}
void
-set_gdbarch_d10v_convert_iaddr_to_raw (gdbarch, d10v_convert_iaddr_to_raw)
- struct gdbarch *gdbarch;
- gdbarch_d10v_convert_iaddr_to_raw_ftype d10v_convert_iaddr_to_raw;
+set_gdbarch_d10v_convert_iaddr_to_raw (struct gdbarch *gdbarch,
+ gdbarch_d10v_convert_iaddr_to_raw_ftype d10v_convert_iaddr_to_raw)
{
gdbarch->d10v_convert_iaddr_to_raw = d10v_convert_iaddr_to_raw;
}
}
void
-set_gdbarch_store_struct_return (gdbarch, store_struct_return)
- struct gdbarch *gdbarch;
- gdbarch_store_struct_return_ftype store_struct_return;
+set_gdbarch_store_struct_return (struct gdbarch *gdbarch,
+ gdbarch_store_struct_return_ftype store_struct_return)
{
gdbarch->store_struct_return = store_struct_return;
}
}
void
-set_gdbarch_store_return_value (gdbarch, store_return_value)
- struct gdbarch *gdbarch;
- gdbarch_store_return_value_ftype store_return_value;
+set_gdbarch_store_return_value (struct gdbarch *gdbarch,
+ gdbarch_store_return_value_ftype store_return_value)
{
gdbarch->store_return_value = store_return_value;
}
}
void
-set_gdbarch_extract_struct_value_address (gdbarch, extract_struct_value_address)
- struct gdbarch *gdbarch;
- gdbarch_extract_struct_value_address_ftype extract_struct_value_address;
+set_gdbarch_extract_struct_value_address (struct gdbarch *gdbarch,
+ gdbarch_extract_struct_value_address_ftype extract_struct_value_address)
{
gdbarch->extract_struct_value_address = extract_struct_value_address;
}
}
void
-set_gdbarch_use_struct_convention (gdbarch, use_struct_convention)
- struct gdbarch *gdbarch;
- gdbarch_use_struct_convention_ftype use_struct_convention;
+set_gdbarch_use_struct_convention (struct gdbarch *gdbarch,
+ gdbarch_use_struct_convention_ftype use_struct_convention)
{
gdbarch->use_struct_convention = use_struct_convention;
}
}
void
-set_gdbarch_frame_init_saved_regs (gdbarch, frame_init_saved_regs)
- struct gdbarch *gdbarch;
- gdbarch_frame_init_saved_regs_ftype frame_init_saved_regs;
+set_gdbarch_frame_init_saved_regs (struct gdbarch *gdbarch,
+ gdbarch_frame_init_saved_regs_ftype frame_init_saved_regs)
{
gdbarch->frame_init_saved_regs = frame_init_saved_regs;
}
}
void
-set_gdbarch_init_extra_frame_info (gdbarch, init_extra_frame_info)
- struct gdbarch *gdbarch;
- gdbarch_init_extra_frame_info_ftype init_extra_frame_info;
+set_gdbarch_init_extra_frame_info (struct gdbarch *gdbarch,
+ gdbarch_init_extra_frame_info_ftype init_extra_frame_info)
{
gdbarch->init_extra_frame_info = init_extra_frame_info;
}
}
void
-set_gdbarch_skip_prologue (gdbarch, skip_prologue)
- struct gdbarch *gdbarch;
- gdbarch_skip_prologue_ftype skip_prologue;
+set_gdbarch_skip_prologue (struct gdbarch *gdbarch,
+ gdbarch_skip_prologue_ftype skip_prologue)
{
gdbarch->skip_prologue = skip_prologue;
}
}
void
-set_gdbarch_inner_than (gdbarch, inner_than)
- struct gdbarch *gdbarch;
- gdbarch_inner_than_ftype inner_than;
+set_gdbarch_inner_than (struct gdbarch *gdbarch,
+ gdbarch_inner_than_ftype inner_than)
{
gdbarch->inner_than = inner_than;
}
}
void
-set_gdbarch_breakpoint_from_pc (gdbarch, breakpoint_from_pc)
- struct gdbarch *gdbarch;
- gdbarch_breakpoint_from_pc_ftype breakpoint_from_pc;
+set_gdbarch_breakpoint_from_pc (struct gdbarch *gdbarch,
+ gdbarch_breakpoint_from_pc_ftype breakpoint_from_pc)
{
gdbarch->breakpoint_from_pc = breakpoint_from_pc;
}
CORE_ADDR
-gdbarch_decr_pc_after_break (gdbarch)
- struct gdbarch *gdbarch;
+gdbarch_decr_pc_after_break (struct gdbarch *gdbarch)
{
if (gdbarch->decr_pc_after_break == -1)
internal_error ("gdbarch: gdbarch_decr_pc_after_break invalid");
}
void
-set_gdbarch_decr_pc_after_break (gdbarch, decr_pc_after_break)
- struct gdbarch *gdbarch;
- CORE_ADDR decr_pc_after_break;
+set_gdbarch_decr_pc_after_break (struct gdbarch *gdbarch,
+ CORE_ADDR decr_pc_after_break)
{
gdbarch->decr_pc_after_break = decr_pc_after_break;
}
CORE_ADDR
-gdbarch_function_start_offset (gdbarch)
- struct gdbarch *gdbarch;
+gdbarch_function_start_offset (struct gdbarch *gdbarch)
{
if (gdbarch->function_start_offset == -1)
internal_error ("gdbarch: gdbarch_function_start_offset invalid");
}
void
-set_gdbarch_function_start_offset (gdbarch, function_start_offset)
- struct gdbarch *gdbarch;
- CORE_ADDR function_start_offset;
+set_gdbarch_function_start_offset (struct gdbarch *gdbarch,
+ CORE_ADDR function_start_offset)
{
gdbarch->function_start_offset = function_start_offset;
}
}
void
-set_gdbarch_remote_translate_xfer_address (gdbarch, remote_translate_xfer_address)
- struct gdbarch *gdbarch;
- gdbarch_remote_translate_xfer_address_ftype remote_translate_xfer_address;
+set_gdbarch_remote_translate_xfer_address (struct gdbarch *gdbarch,
+ gdbarch_remote_translate_xfer_address_ftype remote_translate_xfer_address)
{
gdbarch->remote_translate_xfer_address = remote_translate_xfer_address;
}
CORE_ADDR
-gdbarch_frame_args_skip (gdbarch)
- struct gdbarch *gdbarch;
+gdbarch_frame_args_skip (struct gdbarch *gdbarch)
{
if (gdbarch->frame_args_skip == -1)
internal_error ("gdbarch: gdbarch_frame_args_skip invalid");
}
void
-set_gdbarch_frame_args_skip (gdbarch, frame_args_skip)
- struct gdbarch *gdbarch;
- CORE_ADDR frame_args_skip;
+set_gdbarch_frame_args_skip (struct gdbarch *gdbarch,
+ CORE_ADDR frame_args_skip)
{
gdbarch->frame_args_skip = frame_args_skip;
}
}
void
-set_gdbarch_frameless_function_invocation (gdbarch, frameless_function_invocation)
- struct gdbarch *gdbarch;
- gdbarch_frameless_function_invocation_ftype frameless_function_invocation;
+set_gdbarch_frameless_function_invocation (struct gdbarch *gdbarch,
+ gdbarch_frameless_function_invocation_ftype frameless_function_invocation)
{
gdbarch->frameless_function_invocation = frameless_function_invocation;
}
}
void
-set_gdbarch_frame_chain (gdbarch, frame_chain)
- struct gdbarch *gdbarch;
- gdbarch_frame_chain_ftype frame_chain;
+set_gdbarch_frame_chain (struct gdbarch *gdbarch,
+ gdbarch_frame_chain_ftype frame_chain)
{
gdbarch->frame_chain = frame_chain;
}
}
void
-set_gdbarch_frame_chain_valid (gdbarch, frame_chain_valid)
- struct gdbarch *gdbarch;
- gdbarch_frame_chain_valid_ftype frame_chain_valid;
+set_gdbarch_frame_chain_valid (struct gdbarch *gdbarch,
+ gdbarch_frame_chain_valid_ftype frame_chain_valid)
{
gdbarch->frame_chain_valid = frame_chain_valid;
}
}
void
-set_gdbarch_frame_saved_pc (gdbarch, frame_saved_pc)
- struct gdbarch *gdbarch;
- gdbarch_frame_saved_pc_ftype frame_saved_pc;
+set_gdbarch_frame_saved_pc (struct gdbarch *gdbarch,
+ gdbarch_frame_saved_pc_ftype frame_saved_pc)
{
gdbarch->frame_saved_pc = frame_saved_pc;
}
}
void
-set_gdbarch_frame_args_address (gdbarch, frame_args_address)
- struct gdbarch *gdbarch;
- gdbarch_frame_args_address_ftype frame_args_address;
+set_gdbarch_frame_args_address (struct gdbarch *gdbarch,
+ gdbarch_frame_args_address_ftype frame_args_address)
{
gdbarch->frame_args_address = frame_args_address;
}
}
void
-set_gdbarch_frame_locals_address (gdbarch, frame_locals_address)
- struct gdbarch *gdbarch;
- gdbarch_frame_locals_address_ftype frame_locals_address;
+set_gdbarch_frame_locals_address (struct gdbarch *gdbarch,
+ gdbarch_frame_locals_address_ftype frame_locals_address)
{
gdbarch->frame_locals_address = frame_locals_address;
}
}
void
-set_gdbarch_saved_pc_after_call (gdbarch, saved_pc_after_call)
- struct gdbarch *gdbarch;
- gdbarch_saved_pc_after_call_ftype saved_pc_after_call;
+set_gdbarch_saved_pc_after_call (struct gdbarch *gdbarch,
+ gdbarch_saved_pc_after_call_ftype saved_pc_after_call)
{
gdbarch->saved_pc_after_call = saved_pc_after_call;
}
}
void
-set_gdbarch_frame_num_args (gdbarch, frame_num_args)
- struct gdbarch *gdbarch;
- gdbarch_frame_num_args_ftype frame_num_args;
+set_gdbarch_frame_num_args (struct gdbarch *gdbarch,
+ gdbarch_frame_num_args_ftype frame_num_args)
{
gdbarch->frame_num_args = frame_num_args;
}
};
struct gdbarch_data *
-register_gdbarch_data (init)
- gdbarch_data_ftype *init;
+register_gdbarch_data (gdbarch_data_ftype *init)
{
struct gdbarch_data_registration **curr;
for (curr = &gdbarch_data_registrary.registrations;
/* Walk through all the registered users initializing each in turn. */
-static void init_gdbarch_data PARAMS ((struct gdbarch *));
static void
-init_gdbarch_data (gdbarch)
- struct gdbarch *gdbarch;
+init_gdbarch_data (struct gdbarch *gdbarch)
{
struct gdbarch_data_registration *rego;
gdbarch->nr_data = gdbarch_data_registrary.nr + 1;
};
void
-register_gdbarch_swap (data, sizeof_data, init)
- void *data;
- unsigned long sizeof_data;
- gdbarch_swap_ftype *init;
+register_gdbarch_swap (void *data,
+ unsigned long sizeof_data,
+ gdbarch_swap_ftype *init)
{
struct gdbarch_swap_registration **rego;
for (rego = &gdbarch_swap_registrary.registrations;
}
-static void init_gdbarch_swap PARAMS ((struct gdbarch *));
static void
-init_gdbarch_swap (gdbarch)
- struct gdbarch *gdbarch;
+init_gdbarch_swap (struct gdbarch *gdbarch)
{
struct gdbarch_swap_registration *rego;
struct gdbarch_swap **curr = &gdbarch->swap;
}
}
-static void swapout_gdbarch_swap PARAMS ((struct gdbarch *));
static void
-swapout_gdbarch_swap (gdbarch)
- struct gdbarch *gdbarch;
+swapout_gdbarch_swap (struct gdbarch *gdbarch)
{
struct gdbarch_swap *curr;
for (curr = gdbarch->swap;
memcpy (curr->swap, curr->source->data, curr->source->sizeof_data);
}
-static void swapin_gdbarch_swap PARAMS ((struct gdbarch *));
static void
-swapin_gdbarch_swap (gdbarch)
- struct gdbarch *gdbarch;
+swapin_gdbarch_swap (struct gdbarch *gdbarch)
{
struct gdbarch_swap *curr;
for (curr = gdbarch->swap;
static struct gdbarch_init_registration *gdbarch_init_registrary = NULL;
void
-register_gdbarch_init (bfd_architecture, init)
- enum bfd_architecture bfd_architecture;
- gdbarch_init_ftype *init;
+register_gdbarch_init (enum bfd_architecture bfd_architecture,
+ gdbarch_init_ftype *init)
{
struct gdbarch_init_registration **curr;
const struct bfd_arch_info *bfd_arch_info;
BFD_ARCH_INFO and BYTE_ORDER. */
struct gdbarch_list *
-gdbarch_list_lookup_by_info (arches, info)
- struct gdbarch_list *arches;
- const struct gdbarch_info *info;
+gdbarch_list_lookup_by_info (struct gdbarch_list *arches,
+ const struct gdbarch_info *info)
{
for (; arches != NULL; arches = arches->next)
{
failed. */
int
-gdbarch_update (info)
- struct gdbarch_info info;
+gdbarch_update (struct gdbarch_info info)
{
struct gdbarch *new_gdbarch;
struct gdbarch_list **list;
static struct cmd_list_element *endianlist = NULL;
/* Called by ``show endian''. */
-static void show_endian PARAMS ((char *, int));
static void
-show_endian (args, from_tty)
- char *args;
- int from_tty;
+show_endian (char *args, int from_tty)
{
char *msg =
(TARGET_BYTE_ORDER_AUTO
}
/* Called if the user enters ``set endian'' without an argument. */
-static void set_endian PARAMS ((char *, int));
static void
-set_endian (args, from_tty)
- char *args;
- int from_tty;
+set_endian (char *args, int from_tty)
{
printf_unfiltered ("\"set endian\" must be followed by \"auto\", \"big\" or \"little\".\n");
show_endian (args, from_tty);
}
/* Called by ``set endian big''. */
-static void set_endian_big PARAMS ((char *, int));
static void
-set_endian_big (args, from_tty)
- char *args;
- int from_tty;
+set_endian_big (char *args, int from_tty)
{
if (TARGET_BYTE_ORDER_SELECTABLE_P)
{
}
/* Called by ``set endian little''. */
-static void set_endian_little PARAMS ((char *, int));
static void
-set_endian_little (args, from_tty)
- char *args;
- int from_tty;
+set_endian_little (char *args, int from_tty)
{
if (TARGET_BYTE_ORDER_SELECTABLE_P)
{
}
/* Called by ``set endian auto''. */
-static void set_endian_auto PARAMS ((char *, int));
static void
-set_endian_auto (args, from_tty)
- char *args;
- int from_tty;
+set_endian_auto (char *args, int from_tty)
{
if (TARGET_BYTE_ORDER_SELECTABLE_P)
{
}
/* Set the endianness from a BFD. */
-static void set_endian_from_file PARAMS ((bfd *));
static void
-set_endian_from_file (abfd)
- bfd *abfd;
+set_endian_from_file (bfd *abfd)
{
if (TARGET_BYTE_ORDER_SELECTABLE_P)
{
/* Functions to manipulate the architecture of the target */
+enum set_arch { set_arch_auto, set_arch_manual };
+
int target_architecture_auto = 1;
extern const struct bfd_arch_info bfd_default_arch_struct;
const struct bfd_arch_info *target_architecture = &bfd_default_arch_struct;
-int (*target_architecture_hook) PARAMS ((const struct bfd_arch_info *ap));
+int (*target_architecture_hook) (const struct bfd_arch_info *ap);
+
+static void show_endian (char *, int);
+static void set_endian (char *, int);
+static void set_endian_big (char *, int);
+static void set_endian_little (char *, int);
+static void set_endian_auto (char *, int);
+static void set_endian_from_file (bfd *);
+static int arch_ok (const struct bfd_arch_info *arch);
+static void set_arch (const struct bfd_arch_info *arch, enum set_arch type);
+static void show_architecture (char *, int);
+static void set_architecture (char *, int);
+static void info_architecture (char *, int);
+static void set_architecture_from_file (bfd *);
/* Do the real work of changing the current architecture */
-static int arch_ok PARAMS ((const struct bfd_arch_info *arch));
static int
-arch_ok (arch)
- const struct bfd_arch_info *arch;
+arch_ok (const struct bfd_arch_info *arch)
{
/* Should be performing the more basic check that the binary is
compatible with GDB. */
|| target_architecture_hook (arch));
}
-enum set_arch { set_arch_auto, set_arch_manual };
-
-static void set_arch PARAMS ((const struct bfd_arch_info *arch, enum set_arch type));
static void
-set_arch (arch, type)
- const struct bfd_arch_info *arch;
- enum set_arch type;
+set_arch (const struct bfd_arch_info *arch,
+ enum set_arch type)
{
switch (type)
{
}
/* Called if the user enters ``show architecture'' without an argument. */
-static void show_architecture PARAMS ((char *, int));
static void
-show_architecture (args, from_tty)
- char *args;
- int from_tty;
+show_architecture (char *args, int from_tty)
{
const char *arch;
arch = TARGET_ARCHITECTURE->printable_name;
/* Called if the user enters ``set architecture'' with or without an
argument. */
-static void set_architecture PARAMS ((char *, int));
static void
-set_architecture (args, from_tty)
- char *args;
- int from_tty;
+set_architecture (char *args, int from_tty)
{
if (args == NULL)
{
}
/* Called if the user enters ``info architecture'' without an argument. */
-static void info_architecture PARAMS ((char *, int));
static void
-info_architecture (args, from_tty)
- char *args;
- int from_tty;
+info_architecture (char *args, int from_tty)
{
enum bfd_architecture a;
if (GDB_MULTI_ARCH)
}
/* Set the architecture from a BFD */
-static void set_architecture_from_file PARAMS ((bfd *));
static void
-set_architecture_from_file (abfd)
- bfd *abfd;
+set_architecture_from_file (bfd *abfd)
{
const struct bfd_arch_info *wanted = bfd_get_arch_info (abfd);
if (target_architecture_auto)
/* Disassembler */
/* Pointer to the target-dependent disassembly function. */
-int (*tm_print_insn) PARAMS ((bfd_vma, disassemble_info *));
+int (*tm_print_insn) (bfd_vma, disassemble_info *);
disassemble_info tm_print_insn_info;
#endif
-extern void _initialize_gdbarch PARAMS ((void));
+extern void _initialize_gdbarch (void);
void
_initialize_gdbarch ()
{
Foundation, Inc., 59 Temple Place - Suite 330,
Boston, MA 02111-1307, USA. */
-/* *INDENT-OFF* */ /* typedef (f)();'' confuses indent */
+/* *INDENT-OFF* */ /* ``typedef (f)();'' confuses indent */
+
+/* This file was created with the aid of ``gdbarch.sh''.
+
+ The bourn shell script ``gdbarch.sh'' creates the files
+ ``new-gdbarch.c'' and ``new-gdbarch.h and then compares them
+ against the existing ``gdbarch.[hc]''. Any differences found
+ being reported.
+
+ If editing this file, please also run gdbarch.sh and merge any
+ changes into that script. Conversely, when makeing sweeping changes
+ to this file, modifying gdbarch.sh and using its output may prove
+ easier. */
#ifndef GDBARCH_H
#define GDBARCH_H
-#ifdef __STDC__
struct frame_info;
struct value;
-#endif
#ifndef GDB_MULTI_ARCH
/* The following are pre-initialized by GDBARCH. */
-extern const struct bfd_arch_info * gdbarch_bfd_arch_info PARAMS ((struct gdbarch *gdbarch));
+extern const struct bfd_arch_info * gdbarch_bfd_arch_info (struct gdbarch *gdbarch);
/* set_gdbarch_bfd_arch_info() - not applicable - pre-initialized. */
#if GDB_MULTI_ARCH
#if (GDB_MULTI_ARCH > 1) || !defined (TARGET_ARCHITECTURE)
#endif
#endif
-extern int gdbarch_byte_order PARAMS ((struct gdbarch *gdbarch));
+extern int gdbarch_byte_order (struct gdbarch *gdbarch);
/* set_gdbarch_byte_order() - not applicable - pre-initialized. */
#if GDB_MULTI_ARCH
#if (GDB_MULTI_ARCH > 1) || !defined (TARGET_BYTE_ORDER)
/* The following are initialized by the target dependant code. */
-extern int gdbarch_ptr_bit PARAMS ((struct gdbarch *gdbarch));
-extern void set_gdbarch_ptr_bit PARAMS ((struct gdbarch *gdbarch, int ptr_bit));
+extern int gdbarch_ptr_bit (struct gdbarch *gdbarch);
+extern void set_gdbarch_ptr_bit (struct gdbarch *gdbarch, int ptr_bit);
#if GDB_MULTI_ARCH
#if (GDB_MULTI_ARCH > 1) || !defined (TARGET_PTR_BIT)
#define TARGET_PTR_BIT (gdbarch_ptr_bit (current_gdbarch))
#endif
#endif
-extern int gdbarch_short_bit PARAMS ((struct gdbarch *gdbarch));
-extern void set_gdbarch_short_bit PARAMS ((struct gdbarch *gdbarch, int short_bit));
+extern int gdbarch_short_bit (struct gdbarch *gdbarch);
+extern void set_gdbarch_short_bit (struct gdbarch *gdbarch, int short_bit);
#if GDB_MULTI_ARCH
#if (GDB_MULTI_ARCH > 1) || !defined (TARGET_SHORT_BIT)
#define TARGET_SHORT_BIT (gdbarch_short_bit (current_gdbarch))
#endif
#endif
-extern int gdbarch_int_bit PARAMS ((struct gdbarch *gdbarch));
-extern void set_gdbarch_int_bit PARAMS ((struct gdbarch *gdbarch, int int_bit));
+extern int gdbarch_int_bit (struct gdbarch *gdbarch);
+extern void set_gdbarch_int_bit (struct gdbarch *gdbarch, int int_bit);
#if GDB_MULTI_ARCH
#if (GDB_MULTI_ARCH > 1) || !defined (TARGET_INT_BIT)
#define TARGET_INT_BIT (gdbarch_int_bit (current_gdbarch))
#endif
#endif
-extern int gdbarch_long_bit PARAMS ((struct gdbarch *gdbarch));
-extern void set_gdbarch_long_bit PARAMS ((struct gdbarch *gdbarch, int long_bit));
+extern int gdbarch_long_bit (struct gdbarch *gdbarch);
+extern void set_gdbarch_long_bit (struct gdbarch *gdbarch, int long_bit);
#if GDB_MULTI_ARCH
#if (GDB_MULTI_ARCH > 1) || !defined (TARGET_LONG_BIT)
#define TARGET_LONG_BIT (gdbarch_long_bit (current_gdbarch))
#endif
#endif
-extern int gdbarch_long_long_bit PARAMS ((struct gdbarch *gdbarch));
-extern void set_gdbarch_long_long_bit PARAMS ((struct gdbarch *gdbarch, int long_long_bit));
+extern int gdbarch_long_long_bit (struct gdbarch *gdbarch);
+extern void set_gdbarch_long_long_bit (struct gdbarch *gdbarch, int long_long_bit);
#if GDB_MULTI_ARCH
#if (GDB_MULTI_ARCH > 1) || !defined (TARGET_LONG_LONG_BIT)
#define TARGET_LONG_LONG_BIT (gdbarch_long_long_bit (current_gdbarch))
#endif
#endif
-extern int gdbarch_float_bit PARAMS ((struct gdbarch *gdbarch));
-extern void set_gdbarch_float_bit PARAMS ((struct gdbarch *gdbarch, int float_bit));
+extern int gdbarch_float_bit (struct gdbarch *gdbarch);
+extern void set_gdbarch_float_bit (struct gdbarch *gdbarch, int float_bit);
#if GDB_MULTI_ARCH
#if (GDB_MULTI_ARCH > 1) || !defined (TARGET_FLOAT_BIT)
#define TARGET_FLOAT_BIT (gdbarch_float_bit (current_gdbarch))
#endif
#endif
-extern int gdbarch_double_bit PARAMS ((struct gdbarch *gdbarch));
-extern void set_gdbarch_double_bit PARAMS ((struct gdbarch *gdbarch, int double_bit));
+extern int gdbarch_double_bit (struct gdbarch *gdbarch);
+extern void set_gdbarch_double_bit (struct gdbarch *gdbarch, int double_bit);
#if GDB_MULTI_ARCH
#if (GDB_MULTI_ARCH > 1) || !defined (TARGET_DOUBLE_BIT)
#define TARGET_DOUBLE_BIT (gdbarch_double_bit (current_gdbarch))
#endif
#endif
-extern int gdbarch_long_double_bit PARAMS ((struct gdbarch *gdbarch));
-extern void set_gdbarch_long_double_bit PARAMS ((struct gdbarch *gdbarch, int long_double_bit));
+extern int gdbarch_long_double_bit (struct gdbarch *gdbarch);
+extern void set_gdbarch_long_double_bit (struct gdbarch *gdbarch, int long_double_bit);
#if GDB_MULTI_ARCH
#if (GDB_MULTI_ARCH > 1) || !defined (TARGET_LONG_DOUBLE_BIT)
#define TARGET_LONG_DOUBLE_BIT (gdbarch_long_double_bit (current_gdbarch))
#endif
#endif
-typedef CORE_ADDR (gdbarch_read_pc_ftype) PARAMS ((int pid));
-extern CORE_ADDR gdbarch_read_pc PARAMS ((struct gdbarch *gdbarch, int pid));
-extern void set_gdbarch_read_pc PARAMS ((struct gdbarch *gdbarch, gdbarch_read_pc_ftype *read_pc));
+typedef CORE_ADDR (gdbarch_read_pc_ftype) (int pid);
+extern CORE_ADDR gdbarch_read_pc (struct gdbarch *gdbarch, int pid);
+extern void set_gdbarch_read_pc (struct gdbarch *gdbarch, gdbarch_read_pc_ftype *read_pc);
#if GDB_MULTI_ARCH
#if (GDB_MULTI_ARCH > 1) || !defined (TARGET_READ_PC)
#define TARGET_READ_PC(pid) (gdbarch_read_pc (current_gdbarch, pid))
#endif
#endif
-typedef void (gdbarch_write_pc_ftype) PARAMS ((CORE_ADDR val, int pid));
-extern void gdbarch_write_pc PARAMS ((struct gdbarch *gdbarch, CORE_ADDR val, int pid));
-extern void set_gdbarch_write_pc PARAMS ((struct gdbarch *gdbarch, gdbarch_write_pc_ftype *write_pc));
+typedef void (gdbarch_write_pc_ftype) (CORE_ADDR val, int pid);
+extern void gdbarch_write_pc (struct gdbarch *gdbarch, CORE_ADDR val, int pid);
+extern void set_gdbarch_write_pc (struct gdbarch *gdbarch, gdbarch_write_pc_ftype *write_pc);
#if GDB_MULTI_ARCH
#if (GDB_MULTI_ARCH > 1) || !defined (TARGET_WRITE_PC)
#define TARGET_WRITE_PC(val, pid) (gdbarch_write_pc (current_gdbarch, val, pid))
#endif
#endif
-typedef CORE_ADDR (gdbarch_read_fp_ftype) PARAMS ((void));
-extern CORE_ADDR gdbarch_read_fp PARAMS ((struct gdbarch *gdbarch));
-extern void set_gdbarch_read_fp PARAMS ((struct gdbarch *gdbarch, gdbarch_read_fp_ftype *read_fp));
+typedef CORE_ADDR (gdbarch_read_fp_ftype) (void);
+extern CORE_ADDR gdbarch_read_fp (struct gdbarch *gdbarch);
+extern void set_gdbarch_read_fp (struct gdbarch *gdbarch, gdbarch_read_fp_ftype *read_fp);
#if GDB_MULTI_ARCH
#if (GDB_MULTI_ARCH > 1) || !defined (TARGET_READ_FP)
#define TARGET_READ_FP() (gdbarch_read_fp (current_gdbarch))
#endif
#endif
-typedef void (gdbarch_write_fp_ftype) PARAMS ((CORE_ADDR val));
-extern void gdbarch_write_fp PARAMS ((struct gdbarch *gdbarch, CORE_ADDR val));
-extern void set_gdbarch_write_fp PARAMS ((struct gdbarch *gdbarch, gdbarch_write_fp_ftype *write_fp));
+typedef void (gdbarch_write_fp_ftype) (CORE_ADDR val);
+extern void gdbarch_write_fp (struct gdbarch *gdbarch, CORE_ADDR val);
+extern void set_gdbarch_write_fp (struct gdbarch *gdbarch, gdbarch_write_fp_ftype *write_fp);
#if GDB_MULTI_ARCH
#if (GDB_MULTI_ARCH > 1) || !defined (TARGET_WRITE_FP)
#define TARGET_WRITE_FP(val) (gdbarch_write_fp (current_gdbarch, val))
#endif
#endif
-typedef CORE_ADDR (gdbarch_read_sp_ftype) PARAMS ((void));
-extern CORE_ADDR gdbarch_read_sp PARAMS ((struct gdbarch *gdbarch));
-extern void set_gdbarch_read_sp PARAMS ((struct gdbarch *gdbarch, gdbarch_read_sp_ftype *read_sp));
+typedef CORE_ADDR (gdbarch_read_sp_ftype) (void);
+extern CORE_ADDR gdbarch_read_sp (struct gdbarch *gdbarch);
+extern void set_gdbarch_read_sp (struct gdbarch *gdbarch, gdbarch_read_sp_ftype *read_sp);
#if GDB_MULTI_ARCH
#if (GDB_MULTI_ARCH > 1) || !defined (TARGET_READ_SP)
#define TARGET_READ_SP() (gdbarch_read_sp (current_gdbarch))
#endif
#endif
-typedef void (gdbarch_write_sp_ftype) PARAMS ((CORE_ADDR val));
-extern void gdbarch_write_sp PARAMS ((struct gdbarch *gdbarch, CORE_ADDR val));
-extern void set_gdbarch_write_sp PARAMS ((struct gdbarch *gdbarch, gdbarch_write_sp_ftype *write_sp));
+typedef void (gdbarch_write_sp_ftype) (CORE_ADDR val);
+extern void gdbarch_write_sp (struct gdbarch *gdbarch, CORE_ADDR val);
+extern void set_gdbarch_write_sp (struct gdbarch *gdbarch, gdbarch_write_sp_ftype *write_sp);
#if GDB_MULTI_ARCH
#if (GDB_MULTI_ARCH > 1) || !defined (TARGET_WRITE_SP)
#define TARGET_WRITE_SP(val) (gdbarch_write_sp (current_gdbarch, val))
#endif
#endif
-extern int gdbarch_num_regs PARAMS ((struct gdbarch *gdbarch));
-extern void set_gdbarch_num_regs PARAMS ((struct gdbarch *gdbarch, int num_regs));
+extern int gdbarch_num_regs (struct gdbarch *gdbarch);
+extern void set_gdbarch_num_regs (struct gdbarch *gdbarch, int num_regs);
#if GDB_MULTI_ARCH
#if (GDB_MULTI_ARCH > 1) || !defined (NUM_REGS)
#define NUM_REGS (gdbarch_num_regs (current_gdbarch))
#endif
#endif
-extern int gdbarch_sp_regnum PARAMS ((struct gdbarch *gdbarch));
-extern void set_gdbarch_sp_regnum PARAMS ((struct gdbarch *gdbarch, int sp_regnum));
+extern int gdbarch_sp_regnum (struct gdbarch *gdbarch);
+extern void set_gdbarch_sp_regnum (struct gdbarch *gdbarch, int sp_regnum);
#if GDB_MULTI_ARCH
#if (GDB_MULTI_ARCH > 1) || !defined (SP_REGNUM)
#define SP_REGNUM (gdbarch_sp_regnum (current_gdbarch))
#endif
#endif
-extern int gdbarch_fp_regnum PARAMS ((struct gdbarch *gdbarch));
-extern void set_gdbarch_fp_regnum PARAMS ((struct gdbarch *gdbarch, int fp_regnum));
+extern int gdbarch_fp_regnum (struct gdbarch *gdbarch);
+extern void set_gdbarch_fp_regnum (struct gdbarch *gdbarch, int fp_regnum);
#if GDB_MULTI_ARCH
#if (GDB_MULTI_ARCH > 1) || !defined (FP_REGNUM)
#define FP_REGNUM (gdbarch_fp_regnum (current_gdbarch))
#endif
#endif
-extern int gdbarch_pc_regnum PARAMS ((struct gdbarch *gdbarch));
-extern void set_gdbarch_pc_regnum PARAMS ((struct gdbarch *gdbarch, int pc_regnum));
+extern int gdbarch_pc_regnum (struct gdbarch *gdbarch);
+extern void set_gdbarch_pc_regnum (struct gdbarch *gdbarch, int pc_regnum);
#if GDB_MULTI_ARCH
#if (GDB_MULTI_ARCH > 1) || !defined (PC_REGNUM)
#define PC_REGNUM (gdbarch_pc_regnum (current_gdbarch))
#endif
#endif
-typedef char * (gdbarch_register_name_ftype) PARAMS ((int regnr));
-extern char * gdbarch_register_name PARAMS ((struct gdbarch *gdbarch, int regnr));
-extern void set_gdbarch_register_name PARAMS ((struct gdbarch *gdbarch, gdbarch_register_name_ftype *register_name));
+typedef char * (gdbarch_register_name_ftype) (int regnr);
+extern char * gdbarch_register_name (struct gdbarch *gdbarch, int regnr);
+extern void set_gdbarch_register_name (struct gdbarch *gdbarch, gdbarch_register_name_ftype *register_name);
#if GDB_MULTI_ARCH
#if (GDB_MULTI_ARCH > 1) || !defined (REGISTER_NAME)
#define REGISTER_NAME(regnr) (gdbarch_register_name (current_gdbarch, regnr))
#endif
#endif
-extern int gdbarch_register_size PARAMS ((struct gdbarch *gdbarch));
-extern void set_gdbarch_register_size PARAMS ((struct gdbarch *gdbarch, int register_size));
+extern int gdbarch_register_size (struct gdbarch *gdbarch);
+extern void set_gdbarch_register_size (struct gdbarch *gdbarch, int register_size);
#if GDB_MULTI_ARCH
#if (GDB_MULTI_ARCH > 1) || !defined (REGISTER_SIZE)
#define REGISTER_SIZE (gdbarch_register_size (current_gdbarch))
#endif
#endif
-extern int gdbarch_register_bytes PARAMS ((struct gdbarch *gdbarch));
-extern void set_gdbarch_register_bytes PARAMS ((struct gdbarch *gdbarch, int register_bytes));
+extern int gdbarch_register_bytes (struct gdbarch *gdbarch);
+extern void set_gdbarch_register_bytes (struct gdbarch *gdbarch, int register_bytes);
#if GDB_MULTI_ARCH
#if (GDB_MULTI_ARCH > 1) || !defined (REGISTER_BYTES)
#define REGISTER_BYTES (gdbarch_register_bytes (current_gdbarch))
#endif
#endif
-typedef int (gdbarch_register_byte_ftype) PARAMS ((int reg_nr));
-extern int gdbarch_register_byte PARAMS ((struct gdbarch *gdbarch, int reg_nr));
-extern void set_gdbarch_register_byte PARAMS ((struct gdbarch *gdbarch, gdbarch_register_byte_ftype *register_byte));
+typedef int (gdbarch_register_byte_ftype) (int reg_nr);
+extern int gdbarch_register_byte (struct gdbarch *gdbarch, int reg_nr);
+extern void set_gdbarch_register_byte (struct gdbarch *gdbarch, gdbarch_register_byte_ftype *register_byte);
#if GDB_MULTI_ARCH
#if (GDB_MULTI_ARCH > 1) || !defined (REGISTER_BYTE)
#define REGISTER_BYTE(reg_nr) (gdbarch_register_byte (current_gdbarch, reg_nr))
#endif
#endif
-typedef int (gdbarch_register_raw_size_ftype) PARAMS ((int reg_nr));
-extern int gdbarch_register_raw_size PARAMS ((struct gdbarch *gdbarch, int reg_nr));
-extern void set_gdbarch_register_raw_size PARAMS ((struct gdbarch *gdbarch, gdbarch_register_raw_size_ftype *register_raw_size));
+typedef int (gdbarch_register_raw_size_ftype) (int reg_nr);
+extern int gdbarch_register_raw_size (struct gdbarch *gdbarch, int reg_nr);
+extern void set_gdbarch_register_raw_size (struct gdbarch *gdbarch, gdbarch_register_raw_size_ftype *register_raw_size);
#if GDB_MULTI_ARCH
#if (GDB_MULTI_ARCH > 1) || !defined (REGISTER_RAW_SIZE)
#define REGISTER_RAW_SIZE(reg_nr) (gdbarch_register_raw_size (current_gdbarch, reg_nr))
#endif
#endif
-extern int gdbarch_max_register_raw_size PARAMS ((struct gdbarch *gdbarch));
-extern void set_gdbarch_max_register_raw_size PARAMS ((struct gdbarch *gdbarch, int max_register_raw_size));
+extern int gdbarch_max_register_raw_size (struct gdbarch *gdbarch);
+extern void set_gdbarch_max_register_raw_size (struct gdbarch *gdbarch, int max_register_raw_size);
#if GDB_MULTI_ARCH
#if (GDB_MULTI_ARCH > 1) || !defined (MAX_REGISTER_RAW_SIZE)
#define MAX_REGISTER_RAW_SIZE (gdbarch_max_register_raw_size (current_gdbarch))
#endif
#endif
-typedef int (gdbarch_register_virtual_size_ftype) PARAMS ((int reg_nr));
-extern int gdbarch_register_virtual_size PARAMS ((struct gdbarch *gdbarch, int reg_nr));
-extern void set_gdbarch_register_virtual_size PARAMS ((struct gdbarch *gdbarch, gdbarch_register_virtual_size_ftype *register_virtual_size));
+typedef int (gdbarch_register_virtual_size_ftype) (int reg_nr);
+extern int gdbarch_register_virtual_size (struct gdbarch *gdbarch, int reg_nr);
+extern void set_gdbarch_register_virtual_size (struct gdbarch *gdbarch, gdbarch_register_virtual_size_ftype *register_virtual_size);
#if GDB_MULTI_ARCH
#if (GDB_MULTI_ARCH > 1) || !defined (REGISTER_VIRTUAL_SIZE)
#define REGISTER_VIRTUAL_SIZE(reg_nr) (gdbarch_register_virtual_size (current_gdbarch, reg_nr))
#endif
#endif
-extern int gdbarch_max_register_virtual_size PARAMS ((struct gdbarch *gdbarch));
-extern void set_gdbarch_max_register_virtual_size PARAMS ((struct gdbarch *gdbarch, int max_register_virtual_size));
+extern int gdbarch_max_register_virtual_size (struct gdbarch *gdbarch);
+extern void set_gdbarch_max_register_virtual_size (struct gdbarch *gdbarch, int max_register_virtual_size);
#if GDB_MULTI_ARCH
#if (GDB_MULTI_ARCH > 1) || !defined (MAX_REGISTER_VIRTUAL_SIZE)
#define MAX_REGISTER_VIRTUAL_SIZE (gdbarch_max_register_virtual_size (current_gdbarch))
#endif
#endif
-typedef struct type * (gdbarch_register_virtual_type_ftype) PARAMS ((int reg_nr));
-extern struct type * gdbarch_register_virtual_type PARAMS ((struct gdbarch *gdbarch, int reg_nr));
-extern void set_gdbarch_register_virtual_type PARAMS ((struct gdbarch *gdbarch, gdbarch_register_virtual_type_ftype *register_virtual_type));
+typedef struct type * (gdbarch_register_virtual_type_ftype) (int reg_nr);
+extern struct type * gdbarch_register_virtual_type (struct gdbarch *gdbarch, int reg_nr);
+extern void set_gdbarch_register_virtual_type (struct gdbarch *gdbarch, gdbarch_register_virtual_type_ftype *register_virtual_type);
#if GDB_MULTI_ARCH
#if (GDB_MULTI_ARCH > 1) || !defined (REGISTER_VIRTUAL_TYPE)
#define REGISTER_VIRTUAL_TYPE(reg_nr) (gdbarch_register_virtual_type (current_gdbarch, reg_nr))
#endif
#endif
-extern int gdbarch_use_generic_dummy_frames PARAMS ((struct gdbarch *gdbarch));
-extern void set_gdbarch_use_generic_dummy_frames PARAMS ((struct gdbarch *gdbarch, int use_generic_dummy_frames));
+extern int gdbarch_use_generic_dummy_frames (struct gdbarch *gdbarch);
+extern void set_gdbarch_use_generic_dummy_frames (struct gdbarch *gdbarch, int use_generic_dummy_frames);
#if GDB_MULTI_ARCH
#if (GDB_MULTI_ARCH > 1) || !defined (USE_GENERIC_DUMMY_FRAMES)
#define USE_GENERIC_DUMMY_FRAMES (gdbarch_use_generic_dummy_frames (current_gdbarch))
#endif
#endif
-extern int gdbarch_call_dummy_location PARAMS ((struct gdbarch *gdbarch));
-extern void set_gdbarch_call_dummy_location PARAMS ((struct gdbarch *gdbarch, int call_dummy_location));
+extern int gdbarch_call_dummy_location (struct gdbarch *gdbarch);
+extern void set_gdbarch_call_dummy_location (struct gdbarch *gdbarch, int call_dummy_location);
#if GDB_MULTI_ARCH
#if (GDB_MULTI_ARCH > 1) || !defined (CALL_DUMMY_LOCATION)
#define CALL_DUMMY_LOCATION (gdbarch_call_dummy_location (current_gdbarch))
#endif
#endif
-typedef CORE_ADDR (gdbarch_call_dummy_address_ftype) PARAMS ((void));
-extern CORE_ADDR gdbarch_call_dummy_address PARAMS ((struct gdbarch *gdbarch));
-extern void set_gdbarch_call_dummy_address PARAMS ((struct gdbarch *gdbarch, gdbarch_call_dummy_address_ftype *call_dummy_address));
+typedef CORE_ADDR (gdbarch_call_dummy_address_ftype) (void);
+extern CORE_ADDR gdbarch_call_dummy_address (struct gdbarch *gdbarch);
+extern void set_gdbarch_call_dummy_address (struct gdbarch *gdbarch, gdbarch_call_dummy_address_ftype *call_dummy_address);
#if GDB_MULTI_ARCH
#if (GDB_MULTI_ARCH > 1) || !defined (CALL_DUMMY_ADDRESS)
#define CALL_DUMMY_ADDRESS() (gdbarch_call_dummy_address (current_gdbarch))
#endif
#endif
-extern CORE_ADDR gdbarch_call_dummy_start_offset PARAMS ((struct gdbarch *gdbarch));
-extern void set_gdbarch_call_dummy_start_offset PARAMS ((struct gdbarch *gdbarch, CORE_ADDR call_dummy_start_offset));
+extern CORE_ADDR gdbarch_call_dummy_start_offset (struct gdbarch *gdbarch);
+extern void set_gdbarch_call_dummy_start_offset (struct gdbarch *gdbarch, CORE_ADDR call_dummy_start_offset);
#if GDB_MULTI_ARCH
#if (GDB_MULTI_ARCH > 1) || !defined (CALL_DUMMY_START_OFFSET)
#define CALL_DUMMY_START_OFFSET (gdbarch_call_dummy_start_offset (current_gdbarch))
#endif
#endif
-extern CORE_ADDR gdbarch_call_dummy_breakpoint_offset PARAMS ((struct gdbarch *gdbarch));
-extern void set_gdbarch_call_dummy_breakpoint_offset PARAMS ((struct gdbarch *gdbarch, CORE_ADDR call_dummy_breakpoint_offset));
+extern CORE_ADDR gdbarch_call_dummy_breakpoint_offset (struct gdbarch *gdbarch);
+extern void set_gdbarch_call_dummy_breakpoint_offset (struct gdbarch *gdbarch, CORE_ADDR call_dummy_breakpoint_offset);
#if GDB_MULTI_ARCH
#if (GDB_MULTI_ARCH > 1) || !defined (CALL_DUMMY_BREAKPOINT_OFFSET)
#define CALL_DUMMY_BREAKPOINT_OFFSET (gdbarch_call_dummy_breakpoint_offset (current_gdbarch))
#endif
#endif
-extern int gdbarch_call_dummy_breakpoint_offset_p PARAMS ((struct gdbarch *gdbarch));
-extern void set_gdbarch_call_dummy_breakpoint_offset_p PARAMS ((struct gdbarch *gdbarch, int call_dummy_breakpoint_offset_p));
+extern int gdbarch_call_dummy_breakpoint_offset_p (struct gdbarch *gdbarch);
+extern void set_gdbarch_call_dummy_breakpoint_offset_p (struct gdbarch *gdbarch, int call_dummy_breakpoint_offset_p);
#if GDB_MULTI_ARCH
#if (GDB_MULTI_ARCH > 1) || !defined (CALL_DUMMY_BREAKPOINT_OFFSET_P)
#define CALL_DUMMY_BREAKPOINT_OFFSET_P (gdbarch_call_dummy_breakpoint_offset_p (current_gdbarch))
#endif
#endif
-extern int gdbarch_call_dummy_length PARAMS ((struct gdbarch *gdbarch));
-extern void set_gdbarch_call_dummy_length PARAMS ((struct gdbarch *gdbarch, int call_dummy_length));
+extern int gdbarch_call_dummy_length (struct gdbarch *gdbarch);
+extern void set_gdbarch_call_dummy_length (struct gdbarch *gdbarch, int call_dummy_length);
#if GDB_MULTI_ARCH
#if (GDB_MULTI_ARCH > 1) || !defined (CALL_DUMMY_LENGTH)
#define CALL_DUMMY_LENGTH (gdbarch_call_dummy_length (current_gdbarch))
#endif
#endif
-typedef int (gdbarch_pc_in_call_dummy_ftype) PARAMS ((CORE_ADDR pc, CORE_ADDR sp, CORE_ADDR frame_address));
-extern int gdbarch_pc_in_call_dummy PARAMS ((struct gdbarch *gdbarch, CORE_ADDR pc, CORE_ADDR sp, CORE_ADDR frame_address));
-extern void set_gdbarch_pc_in_call_dummy PARAMS ((struct gdbarch *gdbarch, gdbarch_pc_in_call_dummy_ftype *pc_in_call_dummy));
+typedef int (gdbarch_pc_in_call_dummy_ftype) (CORE_ADDR pc, CORE_ADDR sp, CORE_ADDR frame_address);
+extern int gdbarch_pc_in_call_dummy (struct gdbarch *gdbarch, CORE_ADDR pc, CORE_ADDR sp, CORE_ADDR frame_address);
+extern void set_gdbarch_pc_in_call_dummy (struct gdbarch *gdbarch, gdbarch_pc_in_call_dummy_ftype *pc_in_call_dummy);
#if GDB_MULTI_ARCH
#if (GDB_MULTI_ARCH > 1) || !defined (PC_IN_CALL_DUMMY)
#define PC_IN_CALL_DUMMY(pc, sp, frame_address) (gdbarch_pc_in_call_dummy (current_gdbarch, pc, sp, frame_address))
#endif
#endif
-extern int gdbarch_call_dummy_p PARAMS ((struct gdbarch *gdbarch));
-extern void set_gdbarch_call_dummy_p PARAMS ((struct gdbarch *gdbarch, int call_dummy_p));
+extern int gdbarch_call_dummy_p (struct gdbarch *gdbarch);
+extern void set_gdbarch_call_dummy_p (struct gdbarch *gdbarch, int call_dummy_p);
#if GDB_MULTI_ARCH
#if (GDB_MULTI_ARCH > 1) || !defined (CALL_DUMMY_P)
#define CALL_DUMMY_P (gdbarch_call_dummy_p (current_gdbarch))
#endif
#endif
-extern LONGEST * gdbarch_call_dummy_words PARAMS ((struct gdbarch *gdbarch));
-extern void set_gdbarch_call_dummy_words PARAMS ((struct gdbarch *gdbarch, LONGEST * call_dummy_words));
+extern LONGEST * gdbarch_call_dummy_words (struct gdbarch *gdbarch);
+extern void set_gdbarch_call_dummy_words (struct gdbarch *gdbarch, LONGEST * call_dummy_words);
#if GDB_MULTI_ARCH
#if (GDB_MULTI_ARCH > 1) || !defined (CALL_DUMMY_WORDS)
#define CALL_DUMMY_WORDS (gdbarch_call_dummy_words (current_gdbarch))
#endif
#endif
-extern int gdbarch_sizeof_call_dummy_words PARAMS ((struct gdbarch *gdbarch));
-extern void set_gdbarch_sizeof_call_dummy_words PARAMS ((struct gdbarch *gdbarch, int sizeof_call_dummy_words));
+extern int gdbarch_sizeof_call_dummy_words (struct gdbarch *gdbarch);
+extern void set_gdbarch_sizeof_call_dummy_words (struct gdbarch *gdbarch, int sizeof_call_dummy_words);
#if GDB_MULTI_ARCH
#if (GDB_MULTI_ARCH > 1) || !defined (SIZEOF_CALL_DUMMY_WORDS)
#define SIZEOF_CALL_DUMMY_WORDS (gdbarch_sizeof_call_dummy_words (current_gdbarch))
#endif
#endif
-extern int gdbarch_call_dummy_stack_adjust_p PARAMS ((struct gdbarch *gdbarch));
-extern void set_gdbarch_call_dummy_stack_adjust_p PARAMS ((struct gdbarch *gdbarch, int call_dummy_stack_adjust_p));
+extern int gdbarch_call_dummy_stack_adjust_p (struct gdbarch *gdbarch);
+extern void set_gdbarch_call_dummy_stack_adjust_p (struct gdbarch *gdbarch, int call_dummy_stack_adjust_p);
#if GDB_MULTI_ARCH
#if (GDB_MULTI_ARCH > 1) || !defined (CALL_DUMMY_STACK_ADJUST_P)
#define CALL_DUMMY_STACK_ADJUST_P (gdbarch_call_dummy_stack_adjust_p (current_gdbarch))
#endif
#endif
-extern int gdbarch_call_dummy_stack_adjust PARAMS ((struct gdbarch *gdbarch));
-extern void set_gdbarch_call_dummy_stack_adjust PARAMS ((struct gdbarch *gdbarch, int call_dummy_stack_adjust));
+extern int gdbarch_call_dummy_stack_adjust (struct gdbarch *gdbarch);
+extern void set_gdbarch_call_dummy_stack_adjust (struct gdbarch *gdbarch, int call_dummy_stack_adjust);
#if GDB_MULTI_ARCH
#if (GDB_MULTI_ARCH > 1) || !defined (CALL_DUMMY_STACK_ADJUST)
#define CALL_DUMMY_STACK_ADJUST (gdbarch_call_dummy_stack_adjust (current_gdbarch))
#endif
#endif
-typedef void (gdbarch_fix_call_dummy_ftype) PARAMS ((char *dummy, CORE_ADDR pc, CORE_ADDR fun, int nargs, struct value **args, struct type *type, int gcc_p));
-extern void gdbarch_fix_call_dummy PARAMS ((struct gdbarch *gdbarch, char *dummy, CORE_ADDR pc, CORE_ADDR fun, int nargs, struct value **args, struct type *type, int gcc_p));
-extern void set_gdbarch_fix_call_dummy PARAMS ((struct gdbarch *gdbarch, gdbarch_fix_call_dummy_ftype *fix_call_dummy));
+typedef void (gdbarch_fix_call_dummy_ftype) (char *dummy, CORE_ADDR pc, CORE_ADDR fun, int nargs, struct value **args, struct type *type, int gcc_p);
+extern void gdbarch_fix_call_dummy (struct gdbarch *gdbarch, char *dummy, CORE_ADDR pc, CORE_ADDR fun, int nargs, struct value **args, struct type *type, int gcc_p);
+extern void set_gdbarch_fix_call_dummy (struct gdbarch *gdbarch, gdbarch_fix_call_dummy_ftype *fix_call_dummy);
#if GDB_MULTI_ARCH
#if (GDB_MULTI_ARCH > 1) || !defined (FIX_CALL_DUMMY)
#define FIX_CALL_DUMMY(dummy, pc, fun, nargs, args, type, gcc_p) (gdbarch_fix_call_dummy (current_gdbarch, dummy, pc, fun, nargs, args, type, gcc_p))
#endif
#endif
-extern int gdbarch_believe_pcc_promotion PARAMS ((struct gdbarch *gdbarch));
-extern void set_gdbarch_believe_pcc_promotion PARAMS ((struct gdbarch *gdbarch, int believe_pcc_promotion));
+extern int gdbarch_believe_pcc_promotion (struct gdbarch *gdbarch);
+extern void set_gdbarch_believe_pcc_promotion (struct gdbarch *gdbarch, int believe_pcc_promotion);
#if GDB_MULTI_ARCH
#if (GDB_MULTI_ARCH > 1) || !defined (BELIEVE_PCC_PROMOTION)
#define BELIEVE_PCC_PROMOTION (gdbarch_believe_pcc_promotion (current_gdbarch))
#endif
#endif
-extern int gdbarch_believe_pcc_promotion_type PARAMS ((struct gdbarch *gdbarch));
-extern void set_gdbarch_believe_pcc_promotion_type PARAMS ((struct gdbarch *gdbarch, int believe_pcc_promotion_type));
+extern int gdbarch_believe_pcc_promotion_type (struct gdbarch *gdbarch);
+extern void set_gdbarch_believe_pcc_promotion_type (struct gdbarch *gdbarch, int believe_pcc_promotion_type);
#if GDB_MULTI_ARCH
#if (GDB_MULTI_ARCH > 1) || !defined (BELIEVE_PCC_PROMOTION_TYPE)
#define BELIEVE_PCC_PROMOTION_TYPE (gdbarch_believe_pcc_promotion_type (current_gdbarch))
#endif
#endif
-typedef void (gdbarch_get_saved_register_ftype) PARAMS ((char *raw_buffer, int *optimized, CORE_ADDR *addrp, struct frame_info *frame, int regnum, enum lval_type *lval));
-extern void gdbarch_get_saved_register PARAMS ((struct gdbarch *gdbarch, char *raw_buffer, int *optimized, CORE_ADDR *addrp, struct frame_info *frame, int regnum, enum lval_type *lval));
-extern void set_gdbarch_get_saved_register PARAMS ((struct gdbarch *gdbarch, gdbarch_get_saved_register_ftype *get_saved_register));
+typedef void (gdbarch_get_saved_register_ftype) (char *raw_buffer, int *optimized, CORE_ADDR *addrp, struct frame_info *frame, int regnum, enum lval_type *lval);
+extern void gdbarch_get_saved_register (struct gdbarch *gdbarch, char *raw_buffer, int *optimized, CORE_ADDR *addrp, struct frame_info *frame, int regnum, enum lval_type *lval);
+extern void set_gdbarch_get_saved_register (struct gdbarch *gdbarch, gdbarch_get_saved_register_ftype *get_saved_register);
#if GDB_MULTI_ARCH
#if (GDB_MULTI_ARCH > 1) || !defined (GET_SAVED_REGISTER)
#define GET_SAVED_REGISTER(raw_buffer, optimized, addrp, frame, regnum, lval) (gdbarch_get_saved_register (current_gdbarch, raw_buffer, optimized, addrp, frame, regnum, lval))
#endif
#endif
-typedef int (gdbarch_register_convertible_ftype) PARAMS ((int nr));
-extern int gdbarch_register_convertible PARAMS ((struct gdbarch *gdbarch, int nr));
-extern void set_gdbarch_register_convertible PARAMS ((struct gdbarch *gdbarch, gdbarch_register_convertible_ftype *register_convertible));
+typedef int (gdbarch_register_convertible_ftype) (int nr);
+extern int gdbarch_register_convertible (struct gdbarch *gdbarch, int nr);
+extern void set_gdbarch_register_convertible (struct gdbarch *gdbarch, gdbarch_register_convertible_ftype *register_convertible);
#if GDB_MULTI_ARCH
#if (GDB_MULTI_ARCH > 1) || !defined (REGISTER_CONVERTIBLE)
#define REGISTER_CONVERTIBLE(nr) (gdbarch_register_convertible (current_gdbarch, nr))
#endif
#endif
-typedef void (gdbarch_register_convert_to_virtual_ftype) PARAMS ((int regnum, struct type *type, char *from, char *to));
-extern void gdbarch_register_convert_to_virtual PARAMS ((struct gdbarch *gdbarch, int regnum, struct type *type, char *from, char *to));
-extern void set_gdbarch_register_convert_to_virtual PARAMS ((struct gdbarch *gdbarch, gdbarch_register_convert_to_virtual_ftype *register_convert_to_virtual));
+typedef void (gdbarch_register_convert_to_virtual_ftype) (int regnum, struct type *type, char *from, char *to);
+extern void gdbarch_register_convert_to_virtual (struct gdbarch *gdbarch, int regnum, struct type *type, char *from, char *to);
+extern void set_gdbarch_register_convert_to_virtual (struct gdbarch *gdbarch, gdbarch_register_convert_to_virtual_ftype *register_convert_to_virtual);
#if GDB_MULTI_ARCH
#if (GDB_MULTI_ARCH > 1) || !defined (REGISTER_CONVERT_TO_VIRTUAL)
#define REGISTER_CONVERT_TO_VIRTUAL(regnum, type, from, to) (gdbarch_register_convert_to_virtual (current_gdbarch, regnum, type, from, to))
#endif
#endif
-typedef void (gdbarch_register_convert_to_raw_ftype) PARAMS ((struct type *type, int regnum, char *from, char *to));
-extern void gdbarch_register_convert_to_raw PARAMS ((struct gdbarch *gdbarch, struct type *type, int regnum, char *from, char *to));
-extern void set_gdbarch_register_convert_to_raw PARAMS ((struct gdbarch *gdbarch, gdbarch_register_convert_to_raw_ftype *register_convert_to_raw));
+typedef void (gdbarch_register_convert_to_raw_ftype) (struct type *type, int regnum, char *from, char *to);
+extern void gdbarch_register_convert_to_raw (struct gdbarch *gdbarch, struct type *type, int regnum, char *from, char *to);
+extern void set_gdbarch_register_convert_to_raw (struct gdbarch *gdbarch, gdbarch_register_convert_to_raw_ftype *register_convert_to_raw);
#if GDB_MULTI_ARCH
#if (GDB_MULTI_ARCH > 1) || !defined (REGISTER_CONVERT_TO_RAW)
#define REGISTER_CONVERT_TO_RAW(type, regnum, from, to) (gdbarch_register_convert_to_raw (current_gdbarch, type, regnum, from, to))
#endif
#endif
-typedef void (gdbarch_extract_return_value_ftype) PARAMS ((struct type *type, char *regbuf, char *valbuf));
-extern void gdbarch_extract_return_value PARAMS ((struct gdbarch *gdbarch, struct type *type, char *regbuf, char *valbuf));
-extern void set_gdbarch_extract_return_value PARAMS ((struct gdbarch *gdbarch, gdbarch_extract_return_value_ftype *extract_return_value));
+typedef void (gdbarch_extract_return_value_ftype) (struct type *type, char *regbuf, char *valbuf);
+extern void gdbarch_extract_return_value (struct gdbarch *gdbarch, struct type *type, char *regbuf, char *valbuf);
+extern void set_gdbarch_extract_return_value (struct gdbarch *gdbarch, gdbarch_extract_return_value_ftype *extract_return_value);
#if GDB_MULTI_ARCH
#if (GDB_MULTI_ARCH > 1) || !defined (EXTRACT_RETURN_VALUE)
#define EXTRACT_RETURN_VALUE(type, regbuf, valbuf) (gdbarch_extract_return_value (current_gdbarch, type, regbuf, valbuf))
#endif
#endif
-typedef CORE_ADDR (gdbarch_push_arguments_ftype) PARAMS ((int nargs, struct value **args, CORE_ADDR sp, int struct_return, CORE_ADDR struct_addr));
-extern CORE_ADDR gdbarch_push_arguments PARAMS ((struct gdbarch *gdbarch, int nargs, struct value **args, CORE_ADDR sp, int struct_return, CORE_ADDR struct_addr));
-extern void set_gdbarch_push_arguments PARAMS ((struct gdbarch *gdbarch, gdbarch_push_arguments_ftype *push_arguments));
+typedef CORE_ADDR (gdbarch_push_arguments_ftype) (int nargs, struct value **args, CORE_ADDR sp, int struct_return, CORE_ADDR struct_addr);
+extern CORE_ADDR gdbarch_push_arguments (struct gdbarch *gdbarch, int nargs, struct value **args, CORE_ADDR sp, int struct_return, CORE_ADDR struct_addr);
+extern void set_gdbarch_push_arguments (struct gdbarch *gdbarch, gdbarch_push_arguments_ftype *push_arguments);
#if GDB_MULTI_ARCH
#if (GDB_MULTI_ARCH > 1) || !defined (PUSH_ARGUMENTS)
#define PUSH_ARGUMENTS(nargs, args, sp, struct_return, struct_addr) (gdbarch_push_arguments (current_gdbarch, nargs, args, sp, struct_return, struct_addr))
#endif
#endif
-typedef void (gdbarch_push_dummy_frame_ftype) PARAMS ((void));
-extern void gdbarch_push_dummy_frame PARAMS ((struct gdbarch *gdbarch));
-extern void set_gdbarch_push_dummy_frame PARAMS ((struct gdbarch *gdbarch, gdbarch_push_dummy_frame_ftype *push_dummy_frame));
+typedef void (gdbarch_push_dummy_frame_ftype) (void);
+extern void gdbarch_push_dummy_frame (struct gdbarch *gdbarch);
+extern void set_gdbarch_push_dummy_frame (struct gdbarch *gdbarch, gdbarch_push_dummy_frame_ftype *push_dummy_frame);
#if GDB_MULTI_ARCH
#if (GDB_MULTI_ARCH > 1) || !defined (PUSH_DUMMY_FRAME)
#define PUSH_DUMMY_FRAME (gdbarch_push_dummy_frame (current_gdbarch))
#endif
#endif
-typedef CORE_ADDR (gdbarch_push_return_address_ftype) PARAMS ((CORE_ADDR pc, CORE_ADDR sp));
-extern CORE_ADDR gdbarch_push_return_address PARAMS ((struct gdbarch *gdbarch, CORE_ADDR pc, CORE_ADDR sp));
-extern void set_gdbarch_push_return_address PARAMS ((struct gdbarch *gdbarch, gdbarch_push_return_address_ftype *push_return_address));
+typedef CORE_ADDR (gdbarch_push_return_address_ftype) (CORE_ADDR pc, CORE_ADDR sp);
+extern CORE_ADDR gdbarch_push_return_address (struct gdbarch *gdbarch, CORE_ADDR pc, CORE_ADDR sp);
+extern void set_gdbarch_push_return_address (struct gdbarch *gdbarch, gdbarch_push_return_address_ftype *push_return_address);
#if GDB_MULTI_ARCH
#if (GDB_MULTI_ARCH > 1) || !defined (PUSH_RETURN_ADDRESS)
#define PUSH_RETURN_ADDRESS(pc, sp) (gdbarch_push_return_address (current_gdbarch, pc, sp))
#endif
#endif
-typedef void (gdbarch_pop_frame_ftype) PARAMS ((void));
-extern void gdbarch_pop_frame PARAMS ((struct gdbarch *gdbarch));
-extern void set_gdbarch_pop_frame PARAMS ((struct gdbarch *gdbarch, gdbarch_pop_frame_ftype *pop_frame));
+typedef void (gdbarch_pop_frame_ftype) (void);
+extern void gdbarch_pop_frame (struct gdbarch *gdbarch);
+extern void set_gdbarch_pop_frame (struct gdbarch *gdbarch, gdbarch_pop_frame_ftype *pop_frame);
#if GDB_MULTI_ARCH
#if (GDB_MULTI_ARCH > 1) || !defined (POP_FRAME)
#define POP_FRAME (gdbarch_pop_frame (current_gdbarch))
#endif
#endif
-typedef CORE_ADDR (gdbarch_d10v_make_daddr_ftype) PARAMS ((CORE_ADDR x));
-extern CORE_ADDR gdbarch_d10v_make_daddr PARAMS ((struct gdbarch *gdbarch, CORE_ADDR x));
-extern void set_gdbarch_d10v_make_daddr PARAMS ((struct gdbarch *gdbarch, gdbarch_d10v_make_daddr_ftype *d10v_make_daddr));
+typedef CORE_ADDR (gdbarch_d10v_make_daddr_ftype) (CORE_ADDR x);
+extern CORE_ADDR gdbarch_d10v_make_daddr (struct gdbarch *gdbarch, CORE_ADDR x);
+extern void set_gdbarch_d10v_make_daddr (struct gdbarch *gdbarch, gdbarch_d10v_make_daddr_ftype *d10v_make_daddr);
#if GDB_MULTI_ARCH
#if (GDB_MULTI_ARCH > 1) || !defined (D10V_MAKE_DADDR)
#define D10V_MAKE_DADDR(x) (gdbarch_d10v_make_daddr (current_gdbarch, x))
#endif
#endif
-typedef CORE_ADDR (gdbarch_d10v_make_iaddr_ftype) PARAMS ((CORE_ADDR x));
-extern CORE_ADDR gdbarch_d10v_make_iaddr PARAMS ((struct gdbarch *gdbarch, CORE_ADDR x));
-extern void set_gdbarch_d10v_make_iaddr PARAMS ((struct gdbarch *gdbarch, gdbarch_d10v_make_iaddr_ftype *d10v_make_iaddr));
+typedef CORE_ADDR (gdbarch_d10v_make_iaddr_ftype) (CORE_ADDR x);
+extern CORE_ADDR gdbarch_d10v_make_iaddr (struct gdbarch *gdbarch, CORE_ADDR x);
+extern void set_gdbarch_d10v_make_iaddr (struct gdbarch *gdbarch, gdbarch_d10v_make_iaddr_ftype *d10v_make_iaddr);
#if GDB_MULTI_ARCH
#if (GDB_MULTI_ARCH > 1) || !defined (D10V_MAKE_IADDR)
#define D10V_MAKE_IADDR(x) (gdbarch_d10v_make_iaddr (current_gdbarch, x))
#endif
#endif
-typedef int (gdbarch_d10v_daddr_p_ftype) PARAMS ((CORE_ADDR x));
-extern int gdbarch_d10v_daddr_p PARAMS ((struct gdbarch *gdbarch, CORE_ADDR x));
-extern void set_gdbarch_d10v_daddr_p PARAMS ((struct gdbarch *gdbarch, gdbarch_d10v_daddr_p_ftype *d10v_daddr_p));
+typedef int (gdbarch_d10v_daddr_p_ftype) (CORE_ADDR x);
+extern int gdbarch_d10v_daddr_p (struct gdbarch *gdbarch, CORE_ADDR x);
+extern void set_gdbarch_d10v_daddr_p (struct gdbarch *gdbarch, gdbarch_d10v_daddr_p_ftype *d10v_daddr_p);
#if GDB_MULTI_ARCH
#if (GDB_MULTI_ARCH > 1) || !defined (D10V_DADDR_P)
#define D10V_DADDR_P(x) (gdbarch_d10v_daddr_p (current_gdbarch, x))
#endif
#endif
-typedef int (gdbarch_d10v_iaddr_p_ftype) PARAMS ((CORE_ADDR x));
-extern int gdbarch_d10v_iaddr_p PARAMS ((struct gdbarch *gdbarch, CORE_ADDR x));
-extern void set_gdbarch_d10v_iaddr_p PARAMS ((struct gdbarch *gdbarch, gdbarch_d10v_iaddr_p_ftype *d10v_iaddr_p));
+typedef int (gdbarch_d10v_iaddr_p_ftype) (CORE_ADDR x);
+extern int gdbarch_d10v_iaddr_p (struct gdbarch *gdbarch, CORE_ADDR x);
+extern void set_gdbarch_d10v_iaddr_p (struct gdbarch *gdbarch, gdbarch_d10v_iaddr_p_ftype *d10v_iaddr_p);
#if GDB_MULTI_ARCH
#if (GDB_MULTI_ARCH > 1) || !defined (D10V_IADDR_P)
#define D10V_IADDR_P(x) (gdbarch_d10v_iaddr_p (current_gdbarch, x))
#endif
#endif
-typedef CORE_ADDR (gdbarch_d10v_convert_daddr_to_raw_ftype) PARAMS ((CORE_ADDR x));
-extern CORE_ADDR gdbarch_d10v_convert_daddr_to_raw PARAMS ((struct gdbarch *gdbarch, CORE_ADDR x));
-extern void set_gdbarch_d10v_convert_daddr_to_raw PARAMS ((struct gdbarch *gdbarch, gdbarch_d10v_convert_daddr_to_raw_ftype *d10v_convert_daddr_to_raw));
+typedef CORE_ADDR (gdbarch_d10v_convert_daddr_to_raw_ftype) (CORE_ADDR x);
+extern CORE_ADDR gdbarch_d10v_convert_daddr_to_raw (struct gdbarch *gdbarch, CORE_ADDR x);
+extern void set_gdbarch_d10v_convert_daddr_to_raw (struct gdbarch *gdbarch, gdbarch_d10v_convert_daddr_to_raw_ftype *d10v_convert_daddr_to_raw);
#if GDB_MULTI_ARCH
#if (GDB_MULTI_ARCH > 1) || !defined (D10V_CONVERT_DADDR_TO_RAW)
#define D10V_CONVERT_DADDR_TO_RAW(x) (gdbarch_d10v_convert_daddr_to_raw (current_gdbarch, x))
#endif
#endif
-typedef CORE_ADDR (gdbarch_d10v_convert_iaddr_to_raw_ftype) PARAMS ((CORE_ADDR x));
-extern CORE_ADDR gdbarch_d10v_convert_iaddr_to_raw PARAMS ((struct gdbarch *gdbarch, CORE_ADDR x));
-extern void set_gdbarch_d10v_convert_iaddr_to_raw PARAMS ((struct gdbarch *gdbarch, gdbarch_d10v_convert_iaddr_to_raw_ftype *d10v_convert_iaddr_to_raw));
+typedef CORE_ADDR (gdbarch_d10v_convert_iaddr_to_raw_ftype) (CORE_ADDR x);
+extern CORE_ADDR gdbarch_d10v_convert_iaddr_to_raw (struct gdbarch *gdbarch, CORE_ADDR x);
+extern void set_gdbarch_d10v_convert_iaddr_to_raw (struct gdbarch *gdbarch, gdbarch_d10v_convert_iaddr_to_raw_ftype *d10v_convert_iaddr_to_raw);
#if GDB_MULTI_ARCH
#if (GDB_MULTI_ARCH > 1) || !defined (D10V_CONVERT_IADDR_TO_RAW)
#define D10V_CONVERT_IADDR_TO_RAW(x) (gdbarch_d10v_convert_iaddr_to_raw (current_gdbarch, x))
#endif
#endif
-typedef void (gdbarch_store_struct_return_ftype) PARAMS ((CORE_ADDR addr, CORE_ADDR sp));
-extern void gdbarch_store_struct_return PARAMS ((struct gdbarch *gdbarch, CORE_ADDR addr, CORE_ADDR sp));
-extern void set_gdbarch_store_struct_return PARAMS ((struct gdbarch *gdbarch, gdbarch_store_struct_return_ftype *store_struct_return));
+typedef void (gdbarch_store_struct_return_ftype) (CORE_ADDR addr, CORE_ADDR sp);
+extern void gdbarch_store_struct_return (struct gdbarch *gdbarch, CORE_ADDR addr, CORE_ADDR sp);
+extern void set_gdbarch_store_struct_return (struct gdbarch *gdbarch, gdbarch_store_struct_return_ftype *store_struct_return);
#if GDB_MULTI_ARCH
#if (GDB_MULTI_ARCH > 1) || !defined (STORE_STRUCT_RETURN)
#define STORE_STRUCT_RETURN(addr, sp) (gdbarch_store_struct_return (current_gdbarch, addr, sp))
#endif
#endif
-typedef void (gdbarch_store_return_value_ftype) PARAMS ((struct type *type, char *valbuf));
-extern void gdbarch_store_return_value PARAMS ((struct gdbarch *gdbarch, struct type *type, char *valbuf));
-extern void set_gdbarch_store_return_value PARAMS ((struct gdbarch *gdbarch, gdbarch_store_return_value_ftype *store_return_value));
+typedef void (gdbarch_store_return_value_ftype) (struct type *type, char *valbuf);
+extern void gdbarch_store_return_value (struct gdbarch *gdbarch, struct type *type, char *valbuf);
+extern void set_gdbarch_store_return_value (struct gdbarch *gdbarch, gdbarch_store_return_value_ftype *store_return_value);
#if GDB_MULTI_ARCH
#if (GDB_MULTI_ARCH > 1) || !defined (STORE_RETURN_VALUE)
#define STORE_RETURN_VALUE(type, valbuf) (gdbarch_store_return_value (current_gdbarch, type, valbuf))
#endif
#endif
-typedef CORE_ADDR (gdbarch_extract_struct_value_address_ftype) PARAMS ((char *regbuf));
-extern CORE_ADDR gdbarch_extract_struct_value_address PARAMS ((struct gdbarch *gdbarch, char *regbuf));
-extern void set_gdbarch_extract_struct_value_address PARAMS ((struct gdbarch *gdbarch, gdbarch_extract_struct_value_address_ftype *extract_struct_value_address));
+typedef CORE_ADDR (gdbarch_extract_struct_value_address_ftype) (char *regbuf);
+extern CORE_ADDR gdbarch_extract_struct_value_address (struct gdbarch *gdbarch, char *regbuf);
+extern void set_gdbarch_extract_struct_value_address (struct gdbarch *gdbarch, gdbarch_extract_struct_value_address_ftype *extract_struct_value_address);
#if GDB_MULTI_ARCH
#if (GDB_MULTI_ARCH > 1) || !defined (EXTRACT_STRUCT_VALUE_ADDRESS)
#define EXTRACT_STRUCT_VALUE_ADDRESS(regbuf) (gdbarch_extract_struct_value_address (current_gdbarch, regbuf))
#endif
#endif
-typedef int (gdbarch_use_struct_convention_ftype) PARAMS ((int gcc_p, struct type *value_type));
-extern int gdbarch_use_struct_convention PARAMS ((struct gdbarch *gdbarch, int gcc_p, struct type *value_type));
-extern void set_gdbarch_use_struct_convention PARAMS ((struct gdbarch *gdbarch, gdbarch_use_struct_convention_ftype *use_struct_convention));
+typedef int (gdbarch_use_struct_convention_ftype) (int gcc_p, struct type *value_type);
+extern int gdbarch_use_struct_convention (struct gdbarch *gdbarch, int gcc_p, struct type *value_type);
+extern void set_gdbarch_use_struct_convention (struct gdbarch *gdbarch, gdbarch_use_struct_convention_ftype *use_struct_convention);
#if GDB_MULTI_ARCH
#if (GDB_MULTI_ARCH > 1) || !defined (USE_STRUCT_CONVENTION)
#define USE_STRUCT_CONVENTION(gcc_p, value_type) (gdbarch_use_struct_convention (current_gdbarch, gcc_p, value_type))
#endif
#endif
-typedef void (gdbarch_frame_init_saved_regs_ftype) PARAMS ((struct frame_info *frame));
-extern void gdbarch_frame_init_saved_regs PARAMS ((struct gdbarch *gdbarch, struct frame_info *frame));
-extern void set_gdbarch_frame_init_saved_regs PARAMS ((struct gdbarch *gdbarch, gdbarch_frame_init_saved_regs_ftype *frame_init_saved_regs));
+typedef void (gdbarch_frame_init_saved_regs_ftype) (struct frame_info *frame);
+extern void gdbarch_frame_init_saved_regs (struct gdbarch *gdbarch, struct frame_info *frame);
+extern void set_gdbarch_frame_init_saved_regs (struct gdbarch *gdbarch, gdbarch_frame_init_saved_regs_ftype *frame_init_saved_regs);
#if GDB_MULTI_ARCH
#if (GDB_MULTI_ARCH > 1) || !defined (FRAME_INIT_SAVED_REGS)
#define FRAME_INIT_SAVED_REGS(frame) (gdbarch_frame_init_saved_regs (current_gdbarch, frame))
#endif
#endif
-typedef void (gdbarch_init_extra_frame_info_ftype) PARAMS ((int fromleaf, struct frame_info *frame));
-extern void gdbarch_init_extra_frame_info PARAMS ((struct gdbarch *gdbarch, int fromleaf, struct frame_info *frame));
-extern void set_gdbarch_init_extra_frame_info PARAMS ((struct gdbarch *gdbarch, gdbarch_init_extra_frame_info_ftype *init_extra_frame_info));
+typedef void (gdbarch_init_extra_frame_info_ftype) (int fromleaf, struct frame_info *frame);
+extern void gdbarch_init_extra_frame_info (struct gdbarch *gdbarch, int fromleaf, struct frame_info *frame);
+extern void set_gdbarch_init_extra_frame_info (struct gdbarch *gdbarch, gdbarch_init_extra_frame_info_ftype *init_extra_frame_info);
#if GDB_MULTI_ARCH
#if (GDB_MULTI_ARCH > 1) || !defined (INIT_EXTRA_FRAME_INFO)
#define INIT_EXTRA_FRAME_INFO(fromleaf, frame) (gdbarch_init_extra_frame_info (current_gdbarch, fromleaf, frame))
#endif
#endif
-typedef CORE_ADDR (gdbarch_skip_prologue_ftype) PARAMS ((CORE_ADDR ip));
-extern CORE_ADDR gdbarch_skip_prologue PARAMS ((struct gdbarch *gdbarch, CORE_ADDR ip));
-extern void set_gdbarch_skip_prologue PARAMS ((struct gdbarch *gdbarch, gdbarch_skip_prologue_ftype *skip_prologue));
+typedef CORE_ADDR (gdbarch_skip_prologue_ftype) (CORE_ADDR ip);
+extern CORE_ADDR gdbarch_skip_prologue (struct gdbarch *gdbarch, CORE_ADDR ip);
+extern void set_gdbarch_skip_prologue (struct gdbarch *gdbarch, gdbarch_skip_prologue_ftype *skip_prologue);
#if GDB_MULTI_ARCH
#if (GDB_MULTI_ARCH > 1) || !defined (SKIP_PROLOGUE)
#define SKIP_PROLOGUE(ip) (gdbarch_skip_prologue (current_gdbarch, ip))
#endif
#endif
-typedef int (gdbarch_inner_than_ftype) PARAMS ((CORE_ADDR lhs, CORE_ADDR rhs));
-extern int gdbarch_inner_than PARAMS ((struct gdbarch *gdbarch, CORE_ADDR lhs, CORE_ADDR rhs));
-extern void set_gdbarch_inner_than PARAMS ((struct gdbarch *gdbarch, gdbarch_inner_than_ftype *inner_than));
+typedef int (gdbarch_inner_than_ftype) (CORE_ADDR lhs, CORE_ADDR rhs);
+extern int gdbarch_inner_than (struct gdbarch *gdbarch, CORE_ADDR lhs, CORE_ADDR rhs);
+extern void set_gdbarch_inner_than (struct gdbarch *gdbarch, gdbarch_inner_than_ftype *inner_than);
#if GDB_MULTI_ARCH
#if (GDB_MULTI_ARCH > 1) || !defined (INNER_THAN)
#define INNER_THAN(lhs, rhs) (gdbarch_inner_than (current_gdbarch, lhs, rhs))
#endif
#endif
-typedef unsigned char * (gdbarch_breakpoint_from_pc_ftype) PARAMS ((CORE_ADDR *pcptr, int *lenptr));
-extern unsigned char * gdbarch_breakpoint_from_pc PARAMS ((struct gdbarch *gdbarch, CORE_ADDR *pcptr, int *lenptr));
-extern void set_gdbarch_breakpoint_from_pc PARAMS ((struct gdbarch *gdbarch, gdbarch_breakpoint_from_pc_ftype *breakpoint_from_pc));
+typedef unsigned char * (gdbarch_breakpoint_from_pc_ftype) (CORE_ADDR *pcptr, int *lenptr);
+extern unsigned char * gdbarch_breakpoint_from_pc (struct gdbarch *gdbarch, CORE_ADDR *pcptr, int *lenptr);
+extern void set_gdbarch_breakpoint_from_pc (struct gdbarch *gdbarch, gdbarch_breakpoint_from_pc_ftype *breakpoint_from_pc);
#if GDB_MULTI_ARCH
#if (GDB_MULTI_ARCH > 1) || !defined (BREAKPOINT_FROM_PC)
#define BREAKPOINT_FROM_PC(pcptr, lenptr) (gdbarch_breakpoint_from_pc (current_gdbarch, pcptr, lenptr))
#endif
#endif
-extern CORE_ADDR gdbarch_decr_pc_after_break PARAMS ((struct gdbarch *gdbarch));
-extern void set_gdbarch_decr_pc_after_break PARAMS ((struct gdbarch *gdbarch, CORE_ADDR decr_pc_after_break));
+extern CORE_ADDR gdbarch_decr_pc_after_break (struct gdbarch *gdbarch);
+extern void set_gdbarch_decr_pc_after_break (struct gdbarch *gdbarch, CORE_ADDR decr_pc_after_break);
#if GDB_MULTI_ARCH
#if (GDB_MULTI_ARCH > 1) || !defined (DECR_PC_AFTER_BREAK)
#define DECR_PC_AFTER_BREAK (gdbarch_decr_pc_after_break (current_gdbarch))
#endif
#endif
-extern CORE_ADDR gdbarch_function_start_offset PARAMS ((struct gdbarch *gdbarch));
-extern void set_gdbarch_function_start_offset PARAMS ((struct gdbarch *gdbarch, CORE_ADDR function_start_offset));
+extern CORE_ADDR gdbarch_function_start_offset (struct gdbarch *gdbarch);
+extern void set_gdbarch_function_start_offset (struct gdbarch *gdbarch, CORE_ADDR function_start_offset);
#if GDB_MULTI_ARCH
#if (GDB_MULTI_ARCH > 1) || !defined (FUNCTION_START_OFFSET)
#define FUNCTION_START_OFFSET (gdbarch_function_start_offset (current_gdbarch))
#endif
#endif
-typedef void (gdbarch_remote_translate_xfer_address_ftype) PARAMS ((CORE_ADDR gdb_addr, int gdb_len, CORE_ADDR *rem_addr, int *rem_len));
-extern void gdbarch_remote_translate_xfer_address PARAMS ((struct gdbarch *gdbarch, CORE_ADDR gdb_addr, int gdb_len, CORE_ADDR *rem_addr, int *rem_len));
-extern void set_gdbarch_remote_translate_xfer_address PARAMS ((struct gdbarch *gdbarch, gdbarch_remote_translate_xfer_address_ftype *remote_translate_xfer_address));
+typedef void (gdbarch_remote_translate_xfer_address_ftype) (CORE_ADDR gdb_addr, int gdb_len, CORE_ADDR *rem_addr, int *rem_len);
+extern void gdbarch_remote_translate_xfer_address (struct gdbarch *gdbarch, CORE_ADDR gdb_addr, int gdb_len, CORE_ADDR *rem_addr, int *rem_len);
+extern void set_gdbarch_remote_translate_xfer_address (struct gdbarch *gdbarch, gdbarch_remote_translate_xfer_address_ftype *remote_translate_xfer_address);
#if GDB_MULTI_ARCH
#if (GDB_MULTI_ARCH > 1) || !defined (REMOTE_TRANSLATE_XFER_ADDRESS)
#define REMOTE_TRANSLATE_XFER_ADDRESS(gdb_addr, gdb_len, rem_addr, rem_len) (gdbarch_remote_translate_xfer_address (current_gdbarch, gdb_addr, gdb_len, rem_addr, rem_len))
#endif
#endif
-extern CORE_ADDR gdbarch_frame_args_skip PARAMS ((struct gdbarch *gdbarch));
-extern void set_gdbarch_frame_args_skip PARAMS ((struct gdbarch *gdbarch, CORE_ADDR frame_args_skip));
+extern CORE_ADDR gdbarch_frame_args_skip (struct gdbarch *gdbarch);
+extern void set_gdbarch_frame_args_skip (struct gdbarch *gdbarch, CORE_ADDR frame_args_skip);
#if GDB_MULTI_ARCH
#if (GDB_MULTI_ARCH > 1) || !defined (FRAME_ARGS_SKIP)
#define FRAME_ARGS_SKIP (gdbarch_frame_args_skip (current_gdbarch))
#endif
#endif
-typedef int (gdbarch_frameless_function_invocation_ftype) PARAMS ((struct frame_info *fi));
-extern int gdbarch_frameless_function_invocation PARAMS ((struct gdbarch *gdbarch, struct frame_info *fi));
-extern void set_gdbarch_frameless_function_invocation PARAMS ((struct gdbarch *gdbarch, gdbarch_frameless_function_invocation_ftype *frameless_function_invocation));
+typedef int (gdbarch_frameless_function_invocation_ftype) (struct frame_info *fi);
+extern int gdbarch_frameless_function_invocation (struct gdbarch *gdbarch, struct frame_info *fi);
+extern void set_gdbarch_frameless_function_invocation (struct gdbarch *gdbarch, gdbarch_frameless_function_invocation_ftype *frameless_function_invocation);
#if GDB_MULTI_ARCH
#if (GDB_MULTI_ARCH > 1) || !defined (FRAMELESS_FUNCTION_INVOCATION)
#define FRAMELESS_FUNCTION_INVOCATION(fi) (gdbarch_frameless_function_invocation (current_gdbarch, fi))
#endif
#endif
-typedef CORE_ADDR (gdbarch_frame_chain_ftype) PARAMS ((struct frame_info *frame));
-extern CORE_ADDR gdbarch_frame_chain PARAMS ((struct gdbarch *gdbarch, struct frame_info *frame));
-extern void set_gdbarch_frame_chain PARAMS ((struct gdbarch *gdbarch, gdbarch_frame_chain_ftype *frame_chain));
+typedef CORE_ADDR (gdbarch_frame_chain_ftype) (struct frame_info *frame);
+extern CORE_ADDR gdbarch_frame_chain (struct gdbarch *gdbarch, struct frame_info *frame);
+extern void set_gdbarch_frame_chain (struct gdbarch *gdbarch, gdbarch_frame_chain_ftype *frame_chain);
#if GDB_MULTI_ARCH
#if (GDB_MULTI_ARCH > 1) || !defined (FRAME_CHAIN)
#define FRAME_CHAIN(frame) (gdbarch_frame_chain (current_gdbarch, frame))
#endif
#endif
-typedef int (gdbarch_frame_chain_valid_ftype) PARAMS ((CORE_ADDR chain, struct frame_info *thisframe));
-extern int gdbarch_frame_chain_valid PARAMS ((struct gdbarch *gdbarch, CORE_ADDR chain, struct frame_info *thisframe));
-extern void set_gdbarch_frame_chain_valid PARAMS ((struct gdbarch *gdbarch, gdbarch_frame_chain_valid_ftype *frame_chain_valid));
+typedef int (gdbarch_frame_chain_valid_ftype) (CORE_ADDR chain, struct frame_info *thisframe);
+extern int gdbarch_frame_chain_valid (struct gdbarch *gdbarch, CORE_ADDR chain, struct frame_info *thisframe);
+extern void set_gdbarch_frame_chain_valid (struct gdbarch *gdbarch, gdbarch_frame_chain_valid_ftype *frame_chain_valid);
#if GDB_MULTI_ARCH
#if (GDB_MULTI_ARCH > 1) || !defined (FRAME_CHAIN_VALID)
#define FRAME_CHAIN_VALID(chain, thisframe) (gdbarch_frame_chain_valid (current_gdbarch, chain, thisframe))
#endif
#endif
-typedef CORE_ADDR (gdbarch_frame_saved_pc_ftype) PARAMS ((struct frame_info *fi));
-extern CORE_ADDR gdbarch_frame_saved_pc PARAMS ((struct gdbarch *gdbarch, struct frame_info *fi));
-extern void set_gdbarch_frame_saved_pc PARAMS ((struct gdbarch *gdbarch, gdbarch_frame_saved_pc_ftype *frame_saved_pc));
+typedef CORE_ADDR (gdbarch_frame_saved_pc_ftype) (struct frame_info *fi);
+extern CORE_ADDR gdbarch_frame_saved_pc (struct gdbarch *gdbarch, struct frame_info *fi);
+extern void set_gdbarch_frame_saved_pc (struct gdbarch *gdbarch, gdbarch_frame_saved_pc_ftype *frame_saved_pc);
#if GDB_MULTI_ARCH
#if (GDB_MULTI_ARCH > 1) || !defined (FRAME_SAVED_PC)
#define FRAME_SAVED_PC(fi) (gdbarch_frame_saved_pc (current_gdbarch, fi))
#endif
#endif
-typedef CORE_ADDR (gdbarch_frame_args_address_ftype) PARAMS ((struct frame_info *fi));
-extern CORE_ADDR gdbarch_frame_args_address PARAMS ((struct gdbarch *gdbarch, struct frame_info *fi));
-extern void set_gdbarch_frame_args_address PARAMS ((struct gdbarch *gdbarch, gdbarch_frame_args_address_ftype *frame_args_address));
+typedef CORE_ADDR (gdbarch_frame_args_address_ftype) (struct frame_info *fi);
+extern CORE_ADDR gdbarch_frame_args_address (struct gdbarch *gdbarch, struct frame_info *fi);
+extern void set_gdbarch_frame_args_address (struct gdbarch *gdbarch, gdbarch_frame_args_address_ftype *frame_args_address);
#if GDB_MULTI_ARCH
#if (GDB_MULTI_ARCH > 1) || !defined (FRAME_ARGS_ADDRESS)
#define FRAME_ARGS_ADDRESS(fi) (gdbarch_frame_args_address (current_gdbarch, fi))
#endif
#endif
-typedef CORE_ADDR (gdbarch_frame_locals_address_ftype) PARAMS ((struct frame_info *fi));
-extern CORE_ADDR gdbarch_frame_locals_address PARAMS ((struct gdbarch *gdbarch, struct frame_info *fi));
-extern void set_gdbarch_frame_locals_address PARAMS ((struct gdbarch *gdbarch, gdbarch_frame_locals_address_ftype *frame_locals_address));
+typedef CORE_ADDR (gdbarch_frame_locals_address_ftype) (struct frame_info *fi);
+extern CORE_ADDR gdbarch_frame_locals_address (struct gdbarch *gdbarch, struct frame_info *fi);
+extern void set_gdbarch_frame_locals_address (struct gdbarch *gdbarch, gdbarch_frame_locals_address_ftype *frame_locals_address);
#if GDB_MULTI_ARCH
#if (GDB_MULTI_ARCH > 1) || !defined (FRAME_LOCALS_ADDRESS)
#define FRAME_LOCALS_ADDRESS(fi) (gdbarch_frame_locals_address (current_gdbarch, fi))
#endif
#endif
-typedef CORE_ADDR (gdbarch_saved_pc_after_call_ftype) PARAMS ((struct frame_info *frame));
-extern CORE_ADDR gdbarch_saved_pc_after_call PARAMS ((struct gdbarch *gdbarch, struct frame_info *frame));
-extern void set_gdbarch_saved_pc_after_call PARAMS ((struct gdbarch *gdbarch, gdbarch_saved_pc_after_call_ftype *saved_pc_after_call));
+typedef CORE_ADDR (gdbarch_saved_pc_after_call_ftype) (struct frame_info *frame);
+extern CORE_ADDR gdbarch_saved_pc_after_call (struct gdbarch *gdbarch, struct frame_info *frame);
+extern void set_gdbarch_saved_pc_after_call (struct gdbarch *gdbarch, gdbarch_saved_pc_after_call_ftype *saved_pc_after_call);
#if GDB_MULTI_ARCH
#if (GDB_MULTI_ARCH > 1) || !defined (SAVED_PC_AFTER_CALL)
#define SAVED_PC_AFTER_CALL(frame) (gdbarch_saved_pc_after_call (current_gdbarch, frame))
#endif
#endif
-typedef int (gdbarch_frame_num_args_ftype) PARAMS ((struct frame_info *frame));
-extern int gdbarch_frame_num_args PARAMS ((struct gdbarch *gdbarch, struct frame_info *frame));
-extern void set_gdbarch_frame_num_args PARAMS ((struct gdbarch *gdbarch, gdbarch_frame_num_args_ftype *frame_num_args));
+typedef int (gdbarch_frame_num_args_ftype) (struct frame_info *frame);
+extern int gdbarch_frame_num_args (struct gdbarch *gdbarch, struct frame_info *frame);
+extern void set_gdbarch_frame_num_args (struct gdbarch *gdbarch, gdbarch_frame_num_args_ftype *frame_num_args);
#if GDB_MULTI_ARCH
#if (GDB_MULTI_ARCH > 1) || !defined (FRAME_NUM_ARGS)
#define FRAME_NUM_ARGS(frame) (gdbarch_frame_num_args (current_gdbarch, frame))
#endif
#endif
-extern struct gdbarch_tdep *gdbarch_tdep PARAMS ((struct gdbarch *gdbarch));
+extern struct gdbarch_tdep *gdbarch_tdep (struct gdbarch *gdbarch);
/* Mechanism for co-ordinating the selection of a specific
struct gdbarch_tdep_info *tdep_info;
};
-typedef struct gdbarch *(gdbarch_init_ftype) PARAMS ((struct gdbarch_info info, struct gdbarch_list *arches));
+typedef struct gdbarch *(gdbarch_init_ftype) (struct gdbarch_info info, struct gdbarch_list *arches);
-extern void register_gdbarch_init PARAMS ((enum bfd_architecture architecture, gdbarch_init_ftype *));
+extern void register_gdbarch_init (enum bfd_architecture architecture, gdbarch_init_ftype *);
/* Helper function. Search the list of ARCHES for a GDBARCH that
matches the information provided by INFO. */
-extern struct gdbarch_list *gdbarch_list_lookup_by_info PARAMS ((struct gdbarch_list *arches, const struct gdbarch_info *info));
+extern struct gdbarch_list *gdbarch_list_lookup_by_info (struct gdbarch_list *arches, const struct gdbarch_info *info);
/* Helper function. Create a preliminary ``struct gdbarch''. Perform
parameters. set_gdbarch_*() functions are called to complete the
initialization of the object. */
-extern struct gdbarch *gdbarch_alloc PARAMS ((const struct gdbarch_info *info, struct gdbarch_tdep *tdep));
+extern struct gdbarch *gdbarch_alloc (const struct gdbarch_info *info, struct gdbarch_tdep *tdep);
/* Helper function. Force an update of the current architecture. Used
INFO.ABFD (if specified) before calling the corresponding
architectures INIT function. */
-extern int gdbarch_update PARAMS ((struct gdbarch_info info));
+extern int gdbarch_update (struct gdbarch_info info);
Multiple registrarants for any architecture are allowed (and
strongly encouraged). */
-typedef void *(gdbarch_data_ftype) PARAMS ((void));
-extern struct gdbarch_data *register_gdbarch_data PARAMS ((gdbarch_data_ftype *init));
+typedef void *(gdbarch_data_ftype) (void);
+extern struct gdbarch_data *register_gdbarch_data (gdbarch_data_ftype *init);
/* Return the value of the per-architecture data-pointer for the
current architecture. */
-extern void *gdbarch_data PARAMS ((struct gdbarch_data*));
+extern void *gdbarch_data (struct gdbarch_data*);
New code should use register_gdbarch_data(). */
-typedef void (gdbarch_swap_ftype) PARAMS ((void));
-extern void register_gdbarch_swap PARAMS ((void *data, unsigned long size, gdbarch_swap_ftype *init));
+typedef void (gdbarch_swap_ftype) (void);
+extern void register_gdbarch_swap (void *data, unsigned long size, gdbarch_swap_ftype *init);
architecture. A zero return status indicates that the target did
not like the change. */
-extern int (*target_architecture_hook) PARAMS ((const struct bfd_arch_info *));
+extern int (*target_architecture_hook) (const struct bfd_arch_info *);
#include "dis-asm.h" /* Get defs for disassemble_info */
-extern int dis_asm_read_memory PARAMS ((bfd_vma memaddr, bfd_byte *myaddr,
- int len, disassemble_info *info));
+extern int dis_asm_read_memory (bfd_vma memaddr, bfd_byte *myaddr,
+ int len, disassemble_info *info);
-extern void dis_asm_memory_error PARAMS ((int status, bfd_vma memaddr,
- disassemble_info *info));
+extern void dis_asm_memory_error (int status, bfd_vma memaddr,
+ disassemble_info *info);
-extern void dis_asm_print_address PARAMS ((bfd_vma addr,
- disassemble_info *info));
+extern void dis_asm_print_address (bfd_vma addr,
+ disassemble_info *info);
-extern int (*tm_print_insn) PARAMS ((bfd_vma, disassemble_info*));
+extern int (*tm_print_insn) (bfd_vma, disassemble_info*);
extern disassemble_info tm_print_insn_info;
#ifndef TARGET_PRINT_INSN
#define TARGET_PRINT_INSN(vma, info) (*tm_print_insn) (vma, info)
/* Fallback definition of REGISTER_CONVERTIBLE etc */
-extern int generic_register_convertible_not PARAMS ((int reg_nr));
+extern int generic_register_convertible_not (int reg_nr);
#ifndef REGISTER_CONVERTIBLE
#define REGISTER_CONVERTIBLE(x) (0)
#endif
/* Set the dynamic target-system-dependant parameters (architecture,
byte-order, ...) using information found in the BFD */
-extern void set_gdbarch_from_file PARAMS ((bfd *));
+extern void set_gdbarch_from_file (bfd *);
/* Explicitly set the dynamic target-system-dependant parameters based
on bfd_architecture and machine. */
-extern void set_architecture_from_arch_mach PARAMS ((enum bfd_architecture, unsigned long));
+extern void set_architecture_from_arch_mach (enum bfd_architecture, unsigned long);
/* Helper function for targets that don't know how my arguments are
being passed */
-extern int frame_num_args_unknown PARAMS ((struct frame_info *fi));
+extern int frame_num_args_unknown (struct frame_info *fi);
/* gdbarch trace variable */
extern int gdbarch_debug;
-extern void gdbarch_dump PARAMS ((void));
+extern void gdbarch_dump (void);
#endif
--- /dev/null
+#!/usr/local/bin/bash
+
+# Architecture commands for GDB, the GNU debugger.
+# Copyright 1998-1999 Free Software Foundation, Inc.
+#
+# This file is part of GDB.
+#
+# This program is free software; you can redistribute it and/or modify
+# it under the terms of the GNU General Public License as published by
+# the Free Software Foundation; either version 2 of the License, or
+# (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
+
+IFS=:
+
+read="class level macro returntype function formal actual attrib default init init_p fmt print print_p description"
+
+function_list ()
+{
+ # category:
+ # # -> disable
+ # f -> function
+ # v -> variable
+ # i -> set from info
+ # macro-name
+ # return-type
+ # name
+ # formal argument list
+ # actual argument list
+ # attrib
+ # default exp
+ # init exp
+ # init_p exp
+ # print
+ # description
+ cat <<EOF |
+i:2:TARGET_ARCHITECTURE:const struct bfd_arch_info *:bfd_arch_info::::&bfd_default_arch_struct:::%s:TARGET_ARCHITECTURE->printable_name:TARGET_ARCHITECTURE != NULL
+#
+i:2:TARGET_BYTE_ORDER:int:byte_order::::BIG_ENDIAN
+#
+v:1:TARGET_PTR_BIT:int:ptr_bit::::8 * sizeof (void*):0
+#v:1:TARGET_CHAR_BIT:int:char_bit::::8 * sizeof (char):0
+v:1:TARGET_SHORT_BIT:int:short_bit::::8 * sizeof (short):0
+v:1:TARGET_INT_BIT:int:int_bit::::8 * sizeof (int):0
+v:1:TARGET_LONG_BIT:int:long_bit::::8 * sizeof (long):0
+v:1:TARGET_LONG_LONG_BIT:int:long_long_bit::::8 * sizeof (LONGEST):0
+v:1:TARGET_FLOAT_BIT:int:float_bit::::8 * sizeof (float):0
+v:1:TARGET_DOUBLE_BIT:int:double_bit::::8 * sizeof (double):0
+v:1:TARGET_LONG_DOUBLE_BIT:int:long_double_bit::::8 * sizeof (long double):0
+#
+f:1:TARGET_READ_PC:CORE_ADDR:read_pc:int pid:pid::0:0
+f:1:TARGET_WRITE_PC:void:write_pc:CORE_ADDR val, int pid:val, pid::0:0
+f:1:TARGET_READ_FP:CORE_ADDR:read_fp:void:::0:0
+f:1:TARGET_WRITE_FP:void:write_fp:CORE_ADDR val:val::0:0
+f:1:TARGET_READ_SP:CORE_ADDR:read_sp:void:::0:0
+f:1:TARGET_WRITE_SP:void:write_sp:CORE_ADDR val:val::0:0
+#
+v:2:NUM_REGS:int:num_regs::::0:-1
+v:2:SP_REGNUM:int:sp_regnum::::0:-1
+v:2:FP_REGNUM:int:fp_regnum::::0:-1
+v:2:PC_REGNUM:int:pc_regnum::::0:-1
+f:2:REGISTER_NAME:char *:register_name:int regnr:regnr::0:0
+v:2:REGISTER_SIZE:int:register_size::::0:-1
+v:2:REGISTER_BYTES:int:register_bytes::::0:-1
+f:2:REGISTER_BYTE:int:register_byte:int reg_nr:reg_nr::0:0
+f:2:REGISTER_RAW_SIZE:int:register_raw_size:int reg_nr:reg_nr::0:0
+v:2:MAX_REGISTER_RAW_SIZE:int:max_register_raw_size::::0:-1
+f:2:REGISTER_VIRTUAL_SIZE:int:register_virtual_size:int reg_nr:reg_nr::0:0
+v:2:MAX_REGISTER_VIRTUAL_SIZE:int:max_register_virtual_size::::0:-1
+f:2:REGISTER_VIRTUAL_TYPE:struct type *:register_virtual_type:int reg_nr:reg_nr::0:0
+#
+v:1:USE_GENERIC_DUMMY_FRAMES:int:use_generic_dummy_frames::::0:-1
+v:2:CALL_DUMMY_LOCATION:int:call_dummy_location::::0:0
+f:2:CALL_DUMMY_ADDRESS:CORE_ADDR:call_dummy_address:void:::0:0:gdbarch->call_dummy_location == AT_ENTRY_POINT && gdbarch->call_dummy_address == 0:
+v:2:CALL_DUMMY_START_OFFSET:CORE_ADDR:call_dummy_start_offset::::0:-1::0x%08lx
+v:2:CALL_DUMMY_BREAKPOINT_OFFSET:CORE_ADDR:call_dummy_breakpoint_offset::::0:-1::0x%08lx
+v:1:CALL_DUMMY_BREAKPOINT_OFFSET_P:int:call_dummy_breakpoint_offset_p::::0:-1
+v:2:CALL_DUMMY_LENGTH:int:call_dummy_length::::0:-1::::CALL_DUMMY_LOCATION == BEFORE_TEXT_END || CALL_DUMMY_LOCATION == AFTER_TEXT_END
+f:2:PC_IN_CALL_DUMMY:int:pc_in_call_dummy:CORE_ADDR pc, CORE_ADDR sp, CORE_ADDR frame_address:pc, sp, frame_address::0:0
+v:1:CALL_DUMMY_P:int:call_dummy_p::::0:-1
+v:2:CALL_DUMMY_WORDS:LONGEST *:call_dummy_words::::0:::0x%08lx
+v:2:SIZEOF_CALL_DUMMY_WORDS:int:sizeof_call_dummy_words::::0:::0x%08lx
+v:1:CALL_DUMMY_STACK_ADJUST_P:int:call_dummy_stack_adjust_p::::0:-1::0x%08lx
+v:2:CALL_DUMMY_STACK_ADJUST:int:call_dummy_stack_adjust::::0::gdbarch->call_dummy_stack_adjust_p && gdbarch->call_dummy_stack_adjust == 0:0x%08lx::CALL_DUMMY_STACK_ADJUST_P
+f:2:FIX_CALL_DUMMY:void:fix_call_dummy:char *dummy, CORE_ADDR pc, CORE_ADDR fun, int nargs, struct value **args, struct type *type, int gcc_p:dummy, pc, fun, nargs, args, type, gcc_p::0:0
+#
+v:2:BELIEVE_PCC_PROMOTION:int:believe_pcc_promotion::::0:::::#
+v:2:BELIEVE_PCC_PROMOTION_TYPE:int:believe_pcc_promotion_type::::0:::::#
+f:1:GET_SAVED_REGISTER:void:get_saved_register:char *raw_buffer, int *optimized, CORE_ADDR *addrp, struct frame_info *frame, int regnum, enum lval_type *lval:raw_buffer, optimized, addrp, frame, regnum, lval::generic_get_saved_register:0
+#
+f:1:REGISTER_CONVERTIBLE:int:register_convertible:int nr:nr::0:0
+f:2:REGISTER_CONVERT_TO_VIRTUAL:void:register_convert_to_virtual:int regnum, struct type *type, char *from, char *to:regnum, type, from, to::0:0
+f:2:REGISTER_CONVERT_TO_RAW:void:register_convert_to_raw:struct type *type, int regnum, char *from, char *to:type, regnum, from, to::0:0
+#
+f:2:EXTRACT_RETURN_VALUE:void:extract_return_value:struct type *type, char *regbuf, char *valbuf:type, regbuf, valbuf::0:0
+f:1:PUSH_ARGUMENTS:CORE_ADDR:push_arguments:int nargs, struct value **args, CORE_ADDR sp, int struct_return, CORE_ADDR struct_addr:nargs, args, sp, struct_return, struct_addr::0:0
+f:2:PUSH_DUMMY_FRAME:void:push_dummy_frame:void:-::0:0
+f:1:PUSH_RETURN_ADDRESS:CORE_ADDR:push_return_address:CORE_ADDR pc, CORE_ADDR sp:pc, sp::0:0
+f:2:POP_FRAME:void:pop_frame:void:-::0:0
+#
+# I wish that these would just go away....
+f:2:D10V_MAKE_DADDR:CORE_ADDR:d10v_make_daddr:CORE_ADDR x:x::0:0
+f:2:D10V_MAKE_IADDR:CORE_ADDR:d10v_make_iaddr:CORE_ADDR x:x::0:0
+f:2:D10V_DADDR_P:int:d10v_daddr_p:CORE_ADDR x:x::0:0
+f:2:D10V_IADDR_P:int:d10v_iaddr_p:CORE_ADDR x:x::0:0
+f:2:D10V_CONVERT_DADDR_TO_RAW:CORE_ADDR:d10v_convert_daddr_to_raw:CORE_ADDR x:x::0:0
+f:2:D10V_CONVERT_IADDR_TO_RAW:CORE_ADDR:d10v_convert_iaddr_to_raw:CORE_ADDR x:x::0:0
+#
+f:2:STORE_STRUCT_RETURN:void:store_struct_return:CORE_ADDR addr, CORE_ADDR sp:addr, sp::0:0
+f:2:STORE_RETURN_VALUE:void:store_return_value:struct type *type, char *valbuf:type, valbuf::0:0
+f:2:EXTRACT_STRUCT_VALUE_ADDRESS:CORE_ADDR:extract_struct_value_address:char *regbuf:regbuf::0:0
+f:2:USE_STRUCT_CONVENTION:int:use_struct_convention:int gcc_p, struct type *value_type:gcc_p, value_type::0:0
+#
+f:2:FRAME_INIT_SAVED_REGS:void:frame_init_saved_regs:struct frame_info *frame:frame::0:0
+f:2:INIT_EXTRA_FRAME_INFO:void:init_extra_frame_info:int fromleaf, struct frame_info *frame:fromleaf, frame::0:0
+#
+f:2:SKIP_PROLOGUE:CORE_ADDR:skip_prologue:CORE_ADDR ip:ip::0:0
+f:2:INNER_THAN:int:inner_than:CORE_ADDR lhs, CORE_ADDR rhs:lhs, rhs::0:0
+f:2:BREAKPOINT_FROM_PC:unsigned char *:breakpoint_from_pc:CORE_ADDR *pcptr, int *lenptr:pcptr, lenptr::0:0
+v:2:DECR_PC_AFTER_BREAK:CORE_ADDR:decr_pc_after_break::::0:-1
+v:2:FUNCTION_START_OFFSET:CORE_ADDR:function_start_offset::::0:-1
+#
+f:2:REMOTE_TRANSLATE_XFER_ADDRESS:void:remote_translate_xfer_address:CORE_ADDR gdb_addr, int gdb_len, CORE_ADDR *rem_addr, int *rem_len:gdb_addr, gdb_len, rem_addr, rem_len::0:0
+#
+v:2:FRAME_ARGS_SKIP:CORE_ADDR:frame_args_skip::::0:-1
+f:2:FRAMELESS_FUNCTION_INVOCATION:int:frameless_function_invocation:struct frame_info *fi:fi::0:0
+f:2:FRAME_CHAIN:CORE_ADDR:frame_chain:struct frame_info *frame:frame::0:0
+f:1:FRAME_CHAIN_VALID:int:frame_chain_valid:CORE_ADDR chain, struct frame_info *thisframe:chain, thisframe::0:0
+f:2:FRAME_SAVED_PC:CORE_ADDR:frame_saved_pc:struct frame_info *fi:fi::0:0
+f:2:FRAME_ARGS_ADDRESS:CORE_ADDR:frame_args_address:struct frame_info *fi:fi::0:0
+f:2:FRAME_LOCALS_ADDRESS:CORE_ADDR:frame_locals_address:struct frame_info *fi:fi::0:0
+f:2:SAVED_PC_AFTER_CALL:CORE_ADDR:saved_pc_after_call:struct frame_info *frame:frame::0:0
+f:2:FRAME_NUM_ARGS:int:frame_num_args:struct frame_info *frame:frame::0:0
+#
+EOF
+ grep -v '^#'
+}
+
+
+# dump it out
+if true
+then
+ exec > new-gdbarch
+ function_list | while eval read $read
+ do
+ cat <<EOF
+${class} ${macro}(${actual})
+ ${returntype} ${function} ($formal)${attrib}
+ level=${level}
+ default=${default}
+ init=${init}
+ init_p=${init_p}
+ fmt=${fmt}
+ print=${print}
+ print_p=${print_p}
+ description=${description}
+EOF
+ done
+ exec 1>&2
+fi
+
+copyright ()
+{
+cat <<EOF
+/* Dynamic architecture support for GDB, the GNU debugger.
+ Copyright 1998-1999, Free Software Foundation, Inc.
+
+ This file is part of GDB.
+
+ This program is free software; you can redistribute it and/or modify
+ it under the terms of the GNU General Public License as published by
+ the Free Software Foundation; either version 2 of the License, or
+ (at your option) any later version.
+
+ This program is distributed in the hope that it will be useful,
+ but WITHOUT ANY WARRANTY; without even the implied warranty of
+ MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ GNU General Public License for more details.
+
+ You should have received a copy of the GNU General Public License
+ along with this program; if not, write to the Free Software
+ Foundation, Inc., 59 Temple Place - Suite 330,
+ Boston, MA 02111-1307, USA. */
+
+/* *INDENT-OFF* */ /* \`\`typedef (f)();'' confuses indent */
+
+/* This file was created with the aid of \`\`gdbarch.sh''.
+
+ The bourn shell script \`\`gdbarch.sh'' creates the files
+ \`\`new-gdbarch.c'' and \`\`new-gdbarch.h and then compares them
+ against the existing \`\`gdbarch.[hc]''. Any differences found
+ being reported.
+
+ If editing this file, please also run gdbarch.sh and merge any
+ changes into that script. Conversely, when makeing sweeping changes
+ to this file, modifying gdbarch.sh and using its output may prove
+ easier. */
+
+EOF
+}
+
+#
+# The .h file
+#
+
+exec > new-gdbarch.h
+copyright
+cat <<EOF
+#ifndef GDBARCH_H
+#define GDBARCH_H
+
+struct frame_info;
+struct value;
+
+
+#ifndef GDB_MULTI_ARCH
+#define GDB_MULTI_ARCH 0
+#endif
+
+extern struct gdbarch *current_gdbarch;
+
+
+/* See gdb/doc/gdbint.texi for a discussion of the GDB_MULTI_ARCH
+ macro */
+
+
+/* If any of the following are defined, the target wasn't correctly
+ converted. */
+
+#if GDB_MULTI_ARCH
+#if defined (CALL_DUMMY)
+#error "CALL_DUMMY: replaced by CALL_DUMMY_WORDS/SIZEOF_CALL_DUMMY_WORDS"
+#endif
+#endif
+
+#if GDB_MULTI_ARCH
+#if defined (REGISTER_NAMES)
+#error "REGISTER_NAMES: replaced by REGISTER_NAME"
+#endif
+#endif
+
+#if GDB_MULTI_ARCH
+#if defined (EXTRA_FRAME_INFO)
+#error "EXTRA_FRAME_INFO: replaced by struct frame_extra_info"
+#endif
+#endif
+
+#if GDB_MULTI_ARCH
+#if defined (FRAME_FIND_SAVED_REGS)
+#error "FRAME_FIND_SAVED_REGS: replaced by FRAME_INIT_SAVED_REGS"
+#endif
+#endif
+EOF
+
+# function typedef's
+echo ""
+echo ""
+echo "/* The following are pre-initialized by GDBARCH. */"
+function_list | while eval read $read
+do
+ case "${class}" in
+ "i" )
+ echo ""
+ echo "extern ${returntype} gdbarch_${function} (struct gdbarch *gdbarch);"
+ echo "/* set_gdbarch_${function}() - not applicable - pre-initialized. */"
+ echo "#if GDB_MULTI_ARCH"
+ echo "#if (GDB_MULTI_ARCH > 1) || !defined (${macro})"
+ echo "#define ${macro} (gdbarch_${function} (current_gdbarch))"
+ echo "#endif"
+ echo "#endif"
+ ;;
+ esac
+done
+
+# function typedef's
+echo ""
+echo ""
+echo "/* The following are initialized by the target dependant code. */"
+function_list | while eval read $read
+do
+ case "${class}" in
+ "v" )
+ echo ""
+ echo "extern ${returntype} gdbarch_${function} (struct gdbarch *gdbarch);"
+ echo "extern void set_gdbarch_${function} (struct gdbarch *gdbarch, ${returntype} ${function});"
+ echo "#if GDB_MULTI_ARCH"
+ echo "#if (GDB_MULTI_ARCH > 1) || !defined (${macro})"
+ echo "#define ${macro} (gdbarch_${function} (current_gdbarch))"
+ echo "#endif"
+ echo "#endif"
+ ;;
+ "f" )
+ echo ""
+ echo "typedef ${returntype} (gdbarch_${function}_ftype) (${formal});"
+ if [ "${formal}" = "void" ]
+ then
+ echo "extern ${returntype} gdbarch_${function} (struct gdbarch *gdbarch);"
+ else
+ echo "extern ${returntype} gdbarch_${function} (struct gdbarch *gdbarch, ${formal});"
+ fi
+ echo "extern void set_gdbarch_${function} (struct gdbarch *gdbarch, gdbarch_${function}_ftype *${function});"
+ echo "#if GDB_MULTI_ARCH"
+ echo "#if (GDB_MULTI_ARCH > 1) || !defined (${macro})"
+ if [ "${actual}" = "" ]
+ then
+ echo "#define ${macro}() (gdbarch_${function} (current_gdbarch))"
+ elif [ "${actual}" = "-" ]
+ then
+ echo "#define ${macro} (gdbarch_${function} (current_gdbarch))"
+ else
+ echo "#define ${macro}(${actual}) (gdbarch_${function} (current_gdbarch, ${actual}))"
+ fi
+ echo "#endif"
+ echo "#endif"
+ ;;
+ esac
+done
+
+# close it off
+cat <<EOF
+
+extern struct gdbarch_tdep *gdbarch_tdep (struct gdbarch *gdbarch);
+
+
+/* Mechanism for co-ordinating the selection of a specific
+ architecture.
+
+ GDB targets (*-tdep.c) can register an interest in a specific
+ architecture. Other GDB components can register a need to maintain
+ per-architecture data.
+
+ The mechanisms below ensures that there is only a loose connection
+ between the set-architecture command and the various GDB
+ components. Each component can independantly register their need
+ to maintain architecture specific data with gdbarch.
+
+ Pragmatics:
+
+ Previously, a single TARGET_ARCHITECTURE_HOOK was provided. It
+ didn't scale.
+
+ The more traditional mega-struct containing architecture specific
+ data for all the various GDB components was also considered. Since
+ GDB is built from a variable number of (fairly independant)
+ components it was determined that the global aproach was not
+ applicable. */
+
+
+/* Register a new architectural family with GDB.
+
+ Register support for the specified ARCHITECTURE with GDB. When
+ gdbarch determines that the specified architecture has been
+ selected, the corresponding INIT function is called.
+
+ --
+
+ The INIT function takes two parameters: INFO which contains the
+ information available to gdbarch about the (possibly new)
+ architecture; ARCHES which is a list of the previously created
+ \`\`struct gdbarch'' for this architecture.
+
+ The INIT function parameter INFO shall, as far as possible, be
+ pre-initialized with information obtained from INFO.ABFD or
+ previously selected architecture (if similar). INIT shall ensure
+ that the INFO.BYTE_ORDER is non-zero.
+
+ The INIT function shall return any of: NULL - indicating that it
+ doesn't reconize the selected architecture; an existing \`\`struct
+ gdbarch'' from the ARCHES list - indicating that the new
+ architecture is just a synonym for an earlier architecture (see
+ gdbarch_list_lookup_by_info()); a newly created \`\`struct gdbarch''
+ - that describes the selected architecture (see
+ gdbarch_alloc()). */
+
+struct gdbarch_list
+{
+ struct gdbarch *gdbarch;
+ struct gdbarch_list *next;
+};
+
+struct gdbarch_info
+{
+ /* Use default: bfd_arch_unknown (ZERO). */
+ enum bfd_architecture bfd_architecture;
+
+ /* Use default: NULL (ZERO). */
+ const struct bfd_arch_info *bfd_arch_info;
+
+ /* Use default: 0 (ZERO). */
+ int byte_order;
+
+ /* Use default: NULL (ZERO). */
+ bfd *abfd;
+
+ /* Use default: NULL (ZERO). */
+ struct gdbarch_tdep_info *tdep_info;
+};
+
+typedef struct gdbarch *(gdbarch_init_ftype) (struct gdbarch_info info, struct gdbarch_list *arches);
+
+extern void register_gdbarch_init (enum bfd_architecture architecture, gdbarch_init_ftype *);
+
+
+/* Helper function. Search the list of ARCHES for a GDBARCH that
+ matches the information provided by INFO. */
+
+extern struct gdbarch_list *gdbarch_list_lookup_by_info (struct gdbarch_list *arches, const struct gdbarch_info *info);
+
+
+/* Helper function. Create a preliminary \`\`struct gdbarch''. Perform
+ basic initialization using values obtained from the INFO andTDEP
+ parameters. set_gdbarch_*() functions are called to complete the
+ initialization of the object. */
+
+extern struct gdbarch *gdbarch_alloc (const struct gdbarch_info *info, struct gdbarch_tdep *tdep);
+
+
+/* Helper function. Force an update of the current architecture. Used
+ by legacy targets that have added their own target specific
+ architecture manipulation commands.
+
+ The INFO parameter shall be fully initialized (\`\`memset (&INFO,
+ sizeof (info), 0)'' set relevant fields) before gdbarch_update() is
+ called. gdbarch_update() shall initialize any \`\`default'' fields
+ using information obtained from the previous architecture or
+ INFO.ABFD (if specified) before calling the corresponding
+ architectures INIT function. */
+
+extern int gdbarch_update (struct gdbarch_info info);
+
+
+
+/* Register per-architecture data-pointer.
+
+ Reserve space for a per-architecture data-pointer. An identifier
+ for the reserved data-pointer is returned. That identifer should
+ be saved in a local static.
+
+ When a new architecture is selected, INIT() is called. When a
+ previous architecture is re-selected, the per-architecture
+ data-pointer for that previous architecture is restored (INIT() is
+ not called).
+
+ INIT() shall return the initial value for the per-architecture
+ data-pointer for the current architecture.
+
+ Multiple registrarants for any architecture are allowed (and
+ strongly encouraged). */
+
+typedef void *(gdbarch_data_ftype) (void);
+extern struct gdbarch_data *register_gdbarch_data (gdbarch_data_ftype *init);
+
+/* Return the value of the per-architecture data-pointer for the
+ current architecture. */
+
+extern void *gdbarch_data (struct gdbarch_data*);
+
+
+
+/* Register per-architecture memory region.
+
+ Provide a memory-region swap mechanism. Per-architecture memory
+ region are created. These memory regions are swapped whenever the
+ architecture is changed. For a new architecture, the memory region
+ is initialized with zero (0) and the INIT function is called.
+
+ Memory regions are swapped / initialized in the order that they are
+ registered. NULL DATA and/or INIT values can be specified.
+
+ New code should use register_gdbarch_data(). */
+
+typedef void (gdbarch_swap_ftype) (void);
+extern void register_gdbarch_swap (void *data, unsigned long size, gdbarch_swap_ftype *init);
+
+
+
+/* The target-system-dependant byte order is dynamic */
+
+/* TARGET_BYTE_ORDER_SELECTABLE_P determines if the target endianness
+ is selectable at runtime. The user can use the \`\`set endian''
+ command to change it. TARGET_BYTE_ORDER_AUTO is nonzero when
+ target_byte_order should be auto-detected (from the program image
+ say). */
+
+#if GDB_MULTI_ARCH
+/* Multi-arch GDB is always bi-endian. */
+#define TARGET_BYTE_ORDER_SELECTABLE_P 1
+#endif
+
+#ifndef TARGET_BYTE_ORDER_SELECTABLE_P
+/* compat - Catch old targets that define TARGET_BYTE_ORDER_SLECTABLE
+ when they should have defined TARGET_BYTE_ORDER_SELECTABLE_P 1 */
+#ifdef TARGET_BYTE_ORDER_SELECTABLE
+#define TARGET_BYTE_ORDER_SELECTABLE_P 1
+#else
+#define TARGET_BYTE_ORDER_SELECTABLE_P 0
+#endif
+#endif
+
+extern int target_byte_order;
+#ifdef TARGET_BYTE_ORDER_SELECTABLE
+/* compat - Catch old targets that define TARGET_BYTE_ORDER_SELECTABLE
+ and expect defs.h to re-define TARGET_BYTE_ORDER. */
+#undef TARGET_BYTE_ORDER
+#endif
+#ifndef TARGET_BYTE_ORDER
+#define TARGET_BYTE_ORDER (target_byte_order + 0)
+#endif
+
+extern int target_byte_order_auto;
+#ifndef TARGET_BYTE_ORDER_AUTO
+#define TARGET_BYTE_ORDER_AUTO (target_byte_order_auto + 0)
+#endif
+
+
+
+/* The target-system-dependant BFD architecture is dynamic */
+
+extern int target_architecture_auto;
+#ifndef TARGET_ARCHITECTURE_AUTO
+#define TARGET_ARCHITECTURE_AUTO (target_architecture_auto + 0)
+#endif
+
+extern const struct bfd_arch_info *target_architecture;
+#ifndef TARGET_ARCHITECTURE
+#define TARGET_ARCHITECTURE (target_architecture + 0)
+#endif
+
+/* Notify the target dependant backend of a change to the selected
+ architecture. A zero return status indicates that the target did
+ not like the change. */
+
+extern int (*target_architecture_hook) (const struct bfd_arch_info *);
+
+
+
+/* The target-system-dependant disassembler is semi-dynamic */
+
+#include "dis-asm.h" /* Get defs for disassemble_info */
+
+extern int dis_asm_read_memory (bfd_vma memaddr, bfd_byte *myaddr,
+ int len, disassemble_info *info);
+
+extern void dis_asm_memory_error (int status, bfd_vma memaddr,
+ disassemble_info *info);
+
+extern void dis_asm_print_address (bfd_vma addr,
+ disassemble_info *info);
+
+extern int (*tm_print_insn) (bfd_vma, disassemble_info*);
+extern disassemble_info tm_print_insn_info;
+#ifndef TARGET_PRINT_INSN
+#define TARGET_PRINT_INSN(vma, info) (*tm_print_insn) (vma, info)
+#endif
+#ifndef TARGET_PRINT_INSN_INFO
+#define TARGET_PRINT_INSN_INFO (&tm_print_insn_info)
+#endif
+
+
+
+/* Explicit test for D10V architecture.
+ USE of these macro's is *STRONGLY* discouraged. */
+
+#define GDB_TARGET_IS_D10V (TARGET_ARCHITECTURE->arch == bfd_arch_d10v)
+#ifndef D10V_MAKE_DADDR
+#define D10V_MAKE_DADDR(X) (internal_error ("gdbarch: D10V_MAKE_DADDR"), 0)
+#endif
+#ifndef D10V_MAKE_IADDR
+#define D10V_MAKE_IADDR(X) (internal_error ("gdbarch: D10V_MAKE_IADDR"), 0)
+#endif
+
+
+/* Fallback definition of FRAMELESS_FUNCTION_INVOCATION */
+#ifndef FRAMELESS_FUNCTION_INVOCATION
+#define FRAMELESS_FUNCTION_INVOCATION(FI) (0)
+#endif
+
+
+/* Fallback definition of REGISTER_CONVERTIBLE etc */
+extern int generic_register_convertible_not (int reg_nr);
+#ifndef REGISTER_CONVERTIBLE
+#define REGISTER_CONVERTIBLE(x) (0)
+#endif
+#ifndef REGISTER_CONVERT_TO_VIRTUAL
+#define REGISTER_CONVERT_TO_VIRTUAL(x, y, z, a)
+#endif
+#ifndef REGISTER_CONVERT_TO_RAW
+#define REGISTER_CONVERT_TO_RAW(x, y, z, a)
+#endif
+
+
+/* Fallback definition for EXTRACT_STRUCT_VALUE_ADDRESS */
+#ifndef EXTRACT_STRUCT_VALUE_ADDRESS
+#define EXTRACT_STRUCT_VALUE_ADDRESS_P (0)
+#define EXTRACT_STRUCT_VALUE_ADDRESS(X) (internal_error ("gdbarch: EXTRACT_STRUCT_VALUE_ADDRESS"), 0)
+#else
+#ifndef EXTRACT_STRUCT_VALUE_ADDRESS_P
+#define EXTRACT_STRUCT_VALUE_ADDRESS_P (1)
+#endif
+#endif
+
+
+/* Fallback definition for REGISTER_NAME for systems still defining
+ REGISTER_NAMES. */
+#ifndef REGISTER_NAME
+extern char *gdb_register_names[];
+#define REGISTER_NAME(i) gdb_register_names[i]
+#endif
+
+
+/* Set the dynamic target-system-dependant parameters (architecture,
+ byte-order, ...) using information found in the BFD */
+
+extern void set_gdbarch_from_file (bfd *);
+
+
+/* Explicitly set the dynamic target-system-dependant parameters based
+ on bfd_architecture and machine. */
+
+extern void set_architecture_from_arch_mach (enum bfd_architecture, unsigned long);
+
+
+/* Helper function for targets that don't know how my arguments are
+ being passed */
+
+extern int frame_num_args_unknown (struct frame_info *fi);
+
+
+/* gdbarch trace variable */
+extern int gdbarch_debug;
+
+extern void gdbarch_dump (void);
+
+#endif
+EOF
+exec 1>&2
+#../move-if-change new-gdbarch.h gdbarch.h
+if ! test -r gdbarch.h
+then
+ echo "gdbarch.h missing? cp new-gdbarch.h gdbarch.h" 1>&2
+elif diff -c gdbarch.h new-gdbarch.h
+then
+ echo "gdbarch.h unchanged" 1>&2
+else
+ echo "gdbarch.h has changed? cp new-gdbarch.h gdbarch.h" 1>&2
+fi
+
+
+#
+# C file
+#
+
+exec > new-gdbarch.c
+copyright
+cat <<EOF
+
+#include "defs.h"
+
+#if GDB_MULTI_ARCH
+#include "gdbcmd.h"
+#include "inferior.h" /* enum CALL_DUMMY_LOCATION et.al. */
+#else
+/* Just include everything in sight so that the every old definition
+ of macro is visible. */
+#include "gdb_string.h"
+#include <ctype.h>
+#include "symtab.h"
+#include "frame.h"
+#include "inferior.h"
+#include "breakpoint.h"
+#include "wait.h"
+#include "gdbcore.h"
+#include "gdbcmd.h"
+#include "target.h"
+#include "gdbthread.h"
+#include "annotate.h"
+#include "symfile.h" /* for overlay functions */
+#endif
+#include "symcat.h"
+
+
+/* Static function declarations */
+
+static void verify_gdbarch (struct gdbarch *gdbarch);
+static void init_gdbarch_data (struct gdbarch *);
+static void init_gdbarch_swap (struct gdbarch *);
+static void swapout_gdbarch_swap (struct gdbarch *);
+static void swapin_gdbarch_swap (struct gdbarch *);
+
+/* Convenience macro for allocting typesafe memory. */
+
+#ifndef XMALLOC
+#define XMALLOC(TYPE) (TYPE*) xmalloc (sizeof (TYPE))
+#endif
+
+
+/* Non-zero if we want to trace architecture code. */
+
+#ifndef GDBARCH_DEBUG
+#define GDBARCH_DEBUG 0
+#endif
+int gdbarch_debug = GDBARCH_DEBUG;
+
+EOF
+
+# gdbarch open the gdbarch object
+echo ""
+echo "/* Maintain the struct gdbarch object */"
+echo ""
+echo "struct gdbarch"
+echo "{"
+echo " /* basic architectural information */"
+function_list | while eval read $read
+do
+ case "${class}" in
+ "i" ) echo " ${returntype} ${function};" ;;
+ esac
+done
+echo ""
+echo " /* target specific vector. */"
+echo " struct gdbarch_tdep *tdep;"
+echo ""
+echo " /* per-architecture data-pointers */"
+echo " int nr_data;"
+echo " void **data;"
+echo ""
+echo " /* per-architecture swap-regions */"
+echo " struct gdbarch_swap *swap;"
+echo ""
+cat <<EOF
+ /* Multi-arch values.
+
+ When extending this structure you must:
+
+ Add the field below.
+
+ Declare set/get functions and define the corresponding
+ macro in gdbarch.h.
+
+ gdbarch_alloc(): If zero/NULL is not a suitable default,
+ initialize the new field.
+
+ verify_gdbarch(): Confirm that the target updated the field
+ correctly.
+
+ gdbarch_dump(): Add a fprintf_unfiltered call to so that the new
+ field is dumped out
+
+ \`\`default_gdbarch()'': Append an initial value to the static
+ variable (base values on the host's c-type system).
+
+ get_gdbarch(): Implement the set/get functions (probably using
+ the macro's as shortcuts).
+
+ */
+
+EOF
+function_list | while eval read $read
+do
+ case "${class}" in
+ "v" ) echo " ${returntype} ${function};" ;;
+ "f" ) echo " gdbarch_${function}_ftype *${function}${attrib};" ;;
+ esac
+done
+echo "};"
+
+# A pre-initialized vector
+echo ""
+echo ""
+cat <<EOF
+/* The default architecture uses host values (for want of a better
+ choice). */
+EOF
+echo ""
+echo "extern const struct bfd_arch_info bfd_default_arch_struct;"
+echo ""
+echo "struct gdbarch default_gdbarch = {"
+echo " /* basic architecture information */"
+function_list | while eval read $read
+do
+ case "${class}" in
+ "i" ) echo " ${default}," ;;
+ esac
+done
+cat <<EOF
+ /* target specific vector */
+ NULL,
+ /*per-architecture data-pointers and swap regions */
+ 0, NULL, NULL,
+ /* Multi-arch values */
+EOF
+function_list | while eval read $read
+do
+ case "${class}" in
+ "f" | "v" ) echo " ${default}," ;;
+ esac
+done
+cat <<EOF
+ /* default_gdbarch() */
+};
+struct gdbarch *current_gdbarch = &default_gdbarch;
+EOF
+
+# Create a new gdbarch struct
+echo ""
+echo ""
+cat <<EOF
+/* Create a new \`\`struct gdbarch'' based in information provided by
+ \`\`struct gdbarch_info''. */
+EOF
+echo ""
+cat <<EOF
+struct gdbarch *
+gdbarch_alloc (const struct gdbarch_info *info,
+ struct gdbarch_tdep *tdep)
+{
+ struct gdbarch *gdbarch = XMALLOC (struct gdbarch);
+ memset (gdbarch, 0, sizeof (*gdbarch));
+
+ gdbarch->tdep = tdep;
+EOF
+echo ""
+function_list | while eval read $read
+do
+ case "${class}" in
+ "i" ) echo " gdbarch->${function} = info->${function};"
+ esac
+done
+echo ""
+echo " /* Force the explicit initialization of these. */"
+function_list | while eval read $read
+do
+ case "${class}" in
+ "f" | "v" )
+ if [ "${init}" != "" -a "${init}" != "0" ]
+ then
+ echo " gdbarch->${function} = ${init};"
+ fi
+ ;;
+ esac
+done
+cat <<EOF
+ /* gdbarch_alloc() */
+
+ return gdbarch;
+}
+EOF
+
+# verify a new architecture
+echo ""
+echo ""
+echo "/* Ensure that all values in a GDBARCH are reasonable. */"
+echo ""
+cat <<EOF
+static void
+verify_gdbarch (struct gdbarch *gdbarch)
+{
+ /* Only perform sanity checks on a multi-arch target. */
+ if (GDB_MULTI_ARCH <= 0)
+ return;
+ /* fundamental */
+ if (gdbarch->byte_order == 0)
+ internal_error ("verify_gdbarch: byte-order unset");
+ if (gdbarch->bfd_arch_info == NULL)
+ internal_error ("verify_gdbarch: bfd_arch_info unset");
+ /* Check those that need to be defined for the given multi-arch level. */
+EOF
+function_list | while eval read $read
+do
+ case "${class}" in
+ "f" | "v" )
+ if [ "${init_p}" ]
+ then
+ echo " if ((GDB_MULTI_ARCH >= ${level})"
+ echo " && (${init_p}))"
+ echo " internal_error (\"gdbarch: verify_gdbarch: ${function} invalid\");"
+ elif [ "${init}" ]
+ then
+ echo " if ((GDB_MULTI_ARCH >= ${level})"
+ echo " && (gdbarch->${function} == ${init}))"
+ echo " internal_error (\"gdbarch: verify_gdbarch: ${function} invalid\");"
+ fi
+ ;;
+ esac
+done
+cat <<EOF
+}
+EOF
+
+# dump the structure
+echo ""
+echo ""
+echo "/* Print out the details of the current architecture. */"
+echo ""
+cat <<EOF
+void
+gdbarch_dump (void)
+{
+EOF
+function_list | while eval read $read
+do
+ case "${class}" in
+ "f" )
+ echo " fprintf_unfiltered (gdb_stdlog,"
+ echo " \"gdbarch_update: ${macro} = 0x%08lx\\n\","
+ echo " (long) current_gdbarch->${function}"
+ echo " /*${macro} ()*/);"
+ ;;
+ * )
+ test "${fmt}" || fmt="%ld"
+ test "${print}" || print="(long) ${macro}"
+ if [ "${print_p}" = "#" ]
+ then
+ echo "#ifdef ${macro}"
+ echo " fprintf_unfiltered (gdb_stdlog,"
+ echo " \"gdbarch_update: ${macro} = ${fmt}\\n\","
+ echo " ${print});"
+ echo "#endif"
+ elif [ "${print_p}" ]
+ then
+ echo " if (${print_p})"
+ echo " fprintf_unfiltered (gdb_stdlog,"
+ echo " \"gdbarch_update: ${macro} = ${fmt}\\n\","
+ echo " ${print});"
+ else
+ echo " fprintf_unfiltered (gdb_stdlog,"
+ echo " \"gdbarch_update: ${macro} = ${fmt}\\n\","
+ echo " ${print});"
+ fi
+ ;;
+ esac
+done
+echo "}"
+
+
+# GET/SET
+echo ""
+cat <<EOF
+struct gdbarch_tdep *
+gdbarch_tdep (struct gdbarch *gdbarch)
+{
+ if (gdbarch_debug >= 2)
+ /* FIXME: gdb_std??? */
+ fprintf_unfiltered (gdb_stdlog, "gdbarch_tdep called\n");
+ return gdbarch->tdep;
+}
+EOF
+echo ""
+function_list | while eval read $read
+do
+ case "${class}" in
+ "f" )
+ echo ""
+ echo "${returntype}"
+ if [ "${formal}" = "void" ]
+ then
+ echo "gdbarch_${function} (struct gdbarch *gdbarch)"
+ else
+ echo "gdbarch_${function} (struct gdbarch *gdbarch, ${formal})"
+ fi
+ echo "{"
+ echo " if (gdbarch->${function} == 0)"
+ echo " internal_error (\"gdbarch: gdbarch_${function} invalid\");"
+ echo " if (gdbarch_debug >= 2)"
+ echo " /* FIXME: gdb_std??? */"
+ echo " fprintf_unfiltered (gdb_stdlog, \"gdbarch_${function} called\n\");"
+ test "${actual}" = "-" && actual=""
+ if [ "${returntype}" = "void" ]
+ then
+ echo " gdbarch->${function} (${actual});"
+ else
+ echo " return gdbarch->${function} (${actual});"
+ fi
+ echo "}"
+ echo ""
+ echo "void"
+ echo "set_gdbarch_${function} (struct gdbarch *gdbarch,"
+ echo " `echo ${function} | tr '[0-9a-z_]' ' '` gdbarch_${function}_ftype ${function})"
+ echo "{"
+ echo " gdbarch->${function} = ${function};"
+ echo "}"
+ ;;
+ "v" )
+ echo ""
+ echo "${returntype}"
+ echo "gdbarch_${function} (struct gdbarch *gdbarch)"
+ echo "{"
+ if [ "${init_p}" ]
+ then
+ echo " if (${init_p})"
+ echo " internal_error (\"gdbarch: gdbarch_${function} invalid\");"
+ elif [ "${init}" ]
+ then
+ echo " if (gdbarch->${function} == ${init})"
+ echo " internal_error (\"gdbarch: gdbarch_${function} invalid\");"
+ fi
+ echo " if (gdbarch_debug >= 2)"
+ echo " /* FIXME: gdb_std??? */"
+ echo " fprintf_unfiltered (gdb_stdlog, \"gdbarch_${function} called\n\");"
+ echo " return gdbarch->${function};"
+ echo "}"
+ echo ""
+ echo "void"
+ echo "set_gdbarch_${function} (struct gdbarch *gdbarch,"
+ echo " `echo ${function} | tr '[0-9a-z_]' ' '` ${returntype} ${function})"
+ echo "{"
+ echo " gdbarch->${function} = ${function};"
+ echo "}"
+ ;;
+ "i" )
+ echo ""
+ echo "${returntype}"
+ echo "gdbarch_${function} (struct gdbarch *gdbarch)"
+ echo "{"
+ echo " if (gdbarch_debug >= 2)"
+ echo " /* FIXME: gdb_std??? */"
+ echo " fprintf_unfiltered (gdb_stdlog, \"gdbarch_${function} called\n\");"
+ echo " return gdbarch->${function};"
+ echo "}"
+ ;;
+ esac
+done
+
+# All the trailing guff
+cat <<EOF
+
+
+/* Keep a registrary of per-architecture data-pointers required by GDB
+ modules. */
+
+struct gdbarch_data
+{
+ int index;
+};
+
+struct gdbarch_data_registration
+{
+ gdbarch_data_ftype *init;
+ struct gdbarch_data *data;
+ struct gdbarch_data_registration *next;
+};
+
+struct gdbarch_data_registrary
+{
+ int nr;
+ struct gdbarch_data_registration *registrations;
+};
+
+struct gdbarch_data_registrary gdbarch_data_registrary =
+{
+ 0, NULL,
+};
+
+struct gdbarch_data *
+register_gdbarch_data (gdbarch_data_ftype *init)
+{
+ struct gdbarch_data_registration **curr;
+ for (curr = &gdbarch_data_registrary.registrations;
+ (*curr) != NULL;
+ curr = &(*curr)->next);
+ (*curr) = XMALLOC (struct gdbarch_data_registration);
+ (*curr)->next = NULL;
+ (*curr)->init = init;
+ (*curr)->data = XMALLOC (struct gdbarch_data);
+ (*curr)->data->index = gdbarch_data_registrary.nr++;
+ return (*curr)->data;
+}
+
+
+/* Walk through all the registered users initializing each in turn. */
+
+static void
+init_gdbarch_data (struct gdbarch *gdbarch)
+{
+ struct gdbarch_data_registration *rego;
+ gdbarch->nr_data = gdbarch_data_registrary.nr + 1;
+ gdbarch->data = xmalloc (sizeof (void*) * gdbarch->nr_data);
+ for (rego = gdbarch_data_registrary.registrations;
+ rego != NULL;
+ rego = rego->next)
+ {
+ if (rego->data->index < gdbarch->nr_data)
+ gdbarch->data[rego->data->index] = rego->init ();
+ }
+}
+
+
+/* Return the current value of the specified per-architecture
+ data-pointer. */
+
+void *
+gdbarch_data (data)
+ struct gdbarch_data *data;
+{
+ if (data->index >= current_gdbarch->nr_data)
+ internal_error ("gdbarch_data: request for non-existant data.");
+ return current_gdbarch->data[data->index];
+}
+
+
+
+/* Keep a registrary of swaped data required by GDB modules. */
+
+struct gdbarch_swap
+{
+ void *swap;
+ struct gdbarch_swap_registration *source;
+ struct gdbarch_swap *next;
+};
+
+struct gdbarch_swap_registration
+{
+ void *data;
+ unsigned long sizeof_data;
+ gdbarch_swap_ftype *init;
+ struct gdbarch_swap_registration *next;
+};
+
+struct gdbarch_swap_registrary
+{
+ int nr;
+ struct gdbarch_swap_registration *registrations;
+};
+
+struct gdbarch_swap_registrary gdbarch_swap_registrary =
+{
+ 0, NULL,
+};
+
+void
+register_gdbarch_swap (void *data,
+ unsigned long sizeof_data,
+ gdbarch_swap_ftype *init)
+{
+ struct gdbarch_swap_registration **rego;
+ for (rego = &gdbarch_swap_registrary.registrations;
+ (*rego) != NULL;
+ rego = &(*rego)->next);
+ (*rego) = XMALLOC (struct gdbarch_swap_registration);
+ (*rego)->next = NULL;
+ (*rego)->init = init;
+ (*rego)->data = data;
+ (*rego)->sizeof_data = sizeof_data;
+}
+
+
+static void
+init_gdbarch_swap (struct gdbarch *gdbarch)
+{
+ struct gdbarch_swap_registration *rego;
+ struct gdbarch_swap **curr = &gdbarch->swap;
+ for (rego = gdbarch_swap_registrary.registrations;
+ rego != NULL;
+ rego = rego->next)
+ {
+ if (rego->data != NULL)
+ {
+ (*curr) = XMALLOC (struct gdbarch_swap);
+ (*curr)->source = rego;
+ (*curr)->swap = xmalloc (rego->sizeof_data);
+ (*curr)->next = NULL;
+ memset (rego->data, 0, rego->sizeof_data);
+ curr = &(*curr)->next;
+ }
+ if (rego->init != NULL)
+ rego->init ();
+ }
+}
+
+static void
+swapout_gdbarch_swap (struct gdbarch *gdbarch)
+{
+ struct gdbarch_swap *curr;
+ for (curr = gdbarch->swap;
+ curr != NULL;
+ curr = curr->next)
+ memcpy (curr->swap, curr->source->data, curr->source->sizeof_data);
+}
+
+static void
+swapin_gdbarch_swap (struct gdbarch *gdbarch)
+{
+ struct gdbarch_swap *curr;
+ for (curr = gdbarch->swap;
+ curr != NULL;
+ curr = curr->next)
+ memcpy (curr->source->data, curr->swap, curr->source->sizeof_data);
+}
+
+
+/* Keep a registrary of the architectures known by GDB. */
+
+struct gdbarch_init_registration
+{
+ enum bfd_architecture bfd_architecture;
+ gdbarch_init_ftype *init;
+ struct gdbarch_list *arches;
+ struct gdbarch_init_registration *next;
+};
+
+static struct gdbarch_init_registration *gdbarch_init_registrary = NULL;
+
+void
+register_gdbarch_init (enum bfd_architecture bfd_architecture,
+ gdbarch_init_ftype *init)
+{
+ struct gdbarch_init_registration **curr;
+ const struct bfd_arch_info *bfd_arch_info;
+ /* Check that BFD reconizes this architecture */
+ bfd_arch_info = bfd_lookup_arch (bfd_architecture, 0);
+ if (bfd_arch_info == NULL)
+ {
+ internal_error ("gdbarch: Attempt to register unknown architecture (%d)", bfd_architecture);
+ }
+ /* Check that we haven't seen this architecture before */
+ for (curr = &gdbarch_init_registrary;
+ (*curr) != NULL;
+ curr = &(*curr)->next)
+ {
+ if (bfd_architecture == (*curr)->bfd_architecture)
+ internal_error ("gdbarch: Duplicate registraration of architecture (%s)",
+ bfd_arch_info->printable_name);
+ }
+ /* log it */
+ if (gdbarch_debug)
+ fprintf_unfiltered (gdb_stdlog, "register_gdbarch_init (%s, 0x%08lx)\n",
+ bfd_arch_info->printable_name,
+ (long) init);
+ /* Append it */
+ (*curr) = XMALLOC (struct gdbarch_init_registration);
+ (*curr)->bfd_architecture = bfd_architecture;
+ (*curr)->init = init;
+ (*curr)->arches = NULL;
+ (*curr)->next = NULL;
+}
+
+
+
+/* Look for an architecture using gdbarch_info. Base search on only
+ BFD_ARCH_INFO and BYTE_ORDER. */
+
+struct gdbarch_list *
+gdbarch_list_lookup_by_info (struct gdbarch_list *arches,
+ const struct gdbarch_info *info)
+{
+ for (; arches != NULL; arches = arches->next)
+ {
+ if (info->bfd_arch_info != arches->gdbarch->bfd_arch_info)
+ continue;
+ if (info->byte_order != arches->gdbarch->byte_order)
+ continue;
+ return arches;
+ }
+ return NULL;
+}
+
+
+/* Update the current architecture. Return ZERO if the update request
+ failed. */
+
+int
+gdbarch_update (struct gdbarch_info info)
+{
+ struct gdbarch *new_gdbarch;
+ struct gdbarch_list **list;
+ struct gdbarch_init_registration *rego;
+
+ /* Fill in any missing bits. Most important is the bfd_architecture
+ which is used to select the target architecture. */
+ if (info.bfd_architecture == bfd_arch_unknown)
+ {
+ if (info.bfd_arch_info != NULL)
+ info.bfd_architecture = info.bfd_arch_info->arch;
+ else if (info.abfd != NULL)
+ info.bfd_architecture = bfd_get_arch (info.abfd);
+ /* FIXME - should query BFD for its default architecture. */
+ else
+ info.bfd_architecture = current_gdbarch->bfd_arch_info->arch;
+ }
+ if (info.bfd_arch_info == NULL)
+ {
+ if (target_architecture_auto && info.abfd != NULL)
+ info.bfd_arch_info = bfd_get_arch_info (info.abfd);
+ else
+ info.bfd_arch_info = current_gdbarch->bfd_arch_info;
+ }
+ if (info.byte_order == 0)
+ {
+ if (target_byte_order_auto && info.abfd != NULL)
+ info.byte_order = (bfd_big_endian (info.abfd) ? BIG_ENDIAN
+ : bfd_little_endian (info.abfd) ? LITTLE_ENDIAN
+ : 0);
+ else
+ info.byte_order = current_gdbarch->byte_order;
+ /* FIXME - should query BFD for its default byte-order. */
+ }
+ /* A default for abfd? */
+
+ /* Find the target that knows about this architecture. */
+ for (rego = gdbarch_init_registrary;
+ rego != NULL && rego->bfd_architecture != info.bfd_architecture;
+ rego = rego->next);
+ if (rego == NULL)
+ {
+ if (gdbarch_debug)
+ fprintf_unfiltered (gdb_stdlog, "gdbarch_update: No matching architecture\n");
+ return 0;
+ }
+
+ if (gdbarch_debug)
+ {
+ fprintf_unfiltered (gdb_stdlog,
+ "gdbarch_update: info.bfd_architecture %d (%s)\n",
+ info.bfd_architecture,
+ bfd_lookup_arch (info.bfd_architecture, 0)->printable_name);
+ fprintf_unfiltered (gdb_stdlog,
+ "gdbarch_update: info.bfd_arch_info %s\n",
+ (info.bfd_arch_info != NULL
+ ? info.bfd_arch_info->printable_name
+ : "(null)"));
+ fprintf_unfiltered (gdb_stdlog,
+ "gdbarch_update: info.byte_order %d (%s)\n",
+ info.byte_order,
+ (info.byte_order == BIG_ENDIAN ? "big"
+ : info.byte_order == LITTLE_ENDIAN ? "little"
+ : "default"));
+ fprintf_unfiltered (gdb_stdlog,
+ "gdbarch_update: info.abfd 0x%lx\n",
+ (long) info.abfd);
+ fprintf_unfiltered (gdb_stdlog,
+ "gdbarch_update: info.tdep_info 0x%lx\n",
+ (long) info.tdep_info);
+ }
+
+ /* Ask the target for a replacement architecture. */
+ new_gdbarch = rego->init (info, rego->arches);
+
+ /* Did the target like it? No. Reject the change. */
+ if (new_gdbarch == NULL)
+ {
+ if (gdbarch_debug)
+ fprintf_unfiltered (gdb_stdlog, "gdbarch_update: Target rejected architecture\n");
+ return 0;
+ }
+
+ /* Did the architecture change? No. Do nothing. */
+ if (current_gdbarch == new_gdbarch)
+ {
+ if (gdbarch_debug)
+ fprintf_unfiltered (gdb_stdlog, "gdbarch_update: Architecture 0x%08lx (%s) unchanged\n",
+ (long) new_gdbarch,
+ new_gdbarch->bfd_arch_info->printable_name);
+ return 1;
+ }
+
+ /* Swap all data belonging to the old target out */
+ swapout_gdbarch_swap (current_gdbarch);
+
+ /* Is this a pre-existing architecture? Yes. Swap it in. */
+ for (list = ®o->arches;
+ (*list) != NULL;
+ list = &(*list)->next)
+ {
+ if ((*list)->gdbarch == new_gdbarch)
+ {
+ if (gdbarch_debug)
+ fprintf_unfiltered (gdb_stdlog, "gdbarch_update: Previous architecture 0x%08lx (%s) selected\n",
+ (long) new_gdbarch,
+ new_gdbarch->bfd_arch_info->printable_name);
+ current_gdbarch = new_gdbarch;
+ swapin_gdbarch_swap (new_gdbarch);
+ return 1;
+ }
+ }
+
+ /* Append this new architecture to this targets list. */
+ (*list) = XMALLOC (struct gdbarch_list);
+ (*list)->next = NULL;
+ (*list)->gdbarch = new_gdbarch;
+
+ /* Switch to this new architecture. Dump it out. */
+ current_gdbarch = new_gdbarch;
+ if (gdbarch_debug)
+ {
+ fprintf_unfiltered (gdb_stdlog,
+ "gdbarch_update: New architecture 0x%08lx (%s) selected\n",
+ (long) new_gdbarch,
+ new_gdbarch->bfd_arch_info->printable_name);
+ gdbarch_dump ();
+ }
+
+ /* Check that the newly installed architecture is valid. */
+ verify_gdbarch (new_gdbarch);
+
+ /* Initialize the per-architecture memory (swap) areas.
+ CURRENT_GDBARCH must be update before these modules are
+ called. */
+ init_gdbarch_swap (new_gdbarch);
+
+ /* Initialize the per-architecture data-pointer of all parties that
+ registered an interest in this architecture. CURRENT_GDBARCH
+ must be updated before these modules are called. */
+ init_gdbarch_data (new_gdbarch);
+
+ return 1;
+}
+
+
+
+/* Functions to manipulate the endianness of the target. */
+
+#ifdef TARGET_BYTE_ORDER_SELECTABLE
+/* compat - Catch old targets that expect a selectable byte-order to
+ default to BIG_ENDIAN */
+#ifndef TARGET_BYTE_ORDER_DEFAULT
+#define TARGET_BYTE_ORDER_DEFAULT BIG_ENDIAN
+#endif
+#endif
+#if !TARGET_BYTE_ORDER_SELECTABLE_P
+#ifndef TARGET_BYTE_ORDER_DEFAULT
+/* compat - Catch old non byte-order selectable targets that do not
+ define TARGET_BYTE_ORDER_DEFAULT and instead expect
+ TARGET_BYTE_ORDER to be used as the default. For targets that
+ defined neither TARGET_BYTE_ORDER nor TARGET_BYTE_ORDER_DEFAULT the
+ below will get a strange compiler warning. */
+#define TARGET_BYTE_ORDER_DEFAULT TARGET_BYTE_ORDER
+#endif
+#endif
+#ifndef TARGET_BYTE_ORDER_DEFAULT
+#define TARGET_BYTE_ORDER_DEFAULT BIG_ENDIAN /* arbitrary */
+#endif
+int target_byte_order = TARGET_BYTE_ORDER_DEFAULT;
+int target_byte_order_auto = 1;
+
+/* Chain containing the \"set endian\" commands. */
+static struct cmd_list_element *endianlist = NULL;
+
+/* Called by \`\`show endian''. */
+static void
+show_endian (char *args, int from_tty)
+{
+ char *msg =
+ (TARGET_BYTE_ORDER_AUTO
+ ? "The target endianness is set automatically (currently %s endian)\n"
+ : "The target is assumed to be %s endian\n");
+ printf_unfiltered (msg, (TARGET_BYTE_ORDER == BIG_ENDIAN ? "big" : "little"));
+}
+
+/* Called if the user enters \`\`set endian'' without an argument. */
+static void
+set_endian (char *args, int from_tty)
+{
+ printf_unfiltered ("\"set endian\" must be followed by \"auto\", \"big\" or \"little\".\n");
+ show_endian (args, from_tty);
+}
+
+/* Called by \`\`set endian big''. */
+static void
+set_endian_big (char *args, int from_tty)
+{
+ if (TARGET_BYTE_ORDER_SELECTABLE_P)
+ {
+ target_byte_order = BIG_ENDIAN;
+ target_byte_order_auto = 0;
+ if (GDB_MULTI_ARCH)
+ {
+ struct gdbarch_info info;
+ memset (&info, 0, sizeof info);
+ info.byte_order = BIG_ENDIAN;
+ gdbarch_update (info);
+ }
+ }
+ else
+ {
+ printf_unfiltered ("Byte order is not selectable.");
+ show_endian (args, from_tty);
+ }
+}
+
+/* Called by \`\`set endian little''. */
+static void
+set_endian_little (char *args, int from_tty)
+{
+ if (TARGET_BYTE_ORDER_SELECTABLE_P)
+ {
+ target_byte_order = LITTLE_ENDIAN;
+ target_byte_order_auto = 0;
+ if (GDB_MULTI_ARCH)
+ {
+ struct gdbarch_info info;
+ memset (&info, 0, sizeof info);
+ info.byte_order = LITTLE_ENDIAN;
+ gdbarch_update (info);
+ }
+ }
+ else
+ {
+ printf_unfiltered ("Byte order is not selectable.");
+ show_endian (args, from_tty);
+ }
+}
+
+/* Called by \`\`set endian auto''. */
+static void
+set_endian_auto (char *args, int from_tty)
+{
+ if (TARGET_BYTE_ORDER_SELECTABLE_P)
+ {
+ target_byte_order_auto = 1;
+ }
+ else
+ {
+ printf_unfiltered ("Byte order is not selectable.");
+ show_endian (args, from_tty);
+ }
+}
+
+/* Set the endianness from a BFD. */
+static void
+set_endian_from_file (bfd *abfd)
+{
+ if (TARGET_BYTE_ORDER_SELECTABLE_P)
+ {
+ int want;
+
+ if (bfd_big_endian (abfd))
+ want = BIG_ENDIAN;
+ else
+ want = LITTLE_ENDIAN;
+ if (TARGET_BYTE_ORDER_AUTO)
+ target_byte_order = want;
+ else if (TARGET_BYTE_ORDER != want)
+ warning ("%s endian file does not match %s endian target.",
+ want == BIG_ENDIAN ? "big" : "little",
+ TARGET_BYTE_ORDER == BIG_ENDIAN ? "big" : "little");
+ }
+ else
+ {
+ if (bfd_big_endian (abfd)
+ ? TARGET_BYTE_ORDER != BIG_ENDIAN
+ : TARGET_BYTE_ORDER == BIG_ENDIAN)
+ warning ("%s endian file does not match %s endian target.",
+ bfd_big_endian (abfd) ? "big" : "little",
+ TARGET_BYTE_ORDER == BIG_ENDIAN ? "big" : "little");
+ }
+}
+
+
+
+/* Functions to manipulate the architecture of the target */
+
+enum set_arch { set_arch_auto, set_arch_manual };
+
+int target_architecture_auto = 1;
+extern const struct bfd_arch_info bfd_default_arch_struct;
+const struct bfd_arch_info *target_architecture = &bfd_default_arch_struct;
+int (*target_architecture_hook) (const struct bfd_arch_info *ap);
+
+static void show_endian (char *, int);
+static void set_endian (char *, int);
+static void set_endian_big (char *, int);
+static void set_endian_little (char *, int);
+static void set_endian_auto (char *, int);
+static void set_endian_from_file (bfd *);
+static int arch_ok (const struct bfd_arch_info *arch);
+static void set_arch (const struct bfd_arch_info *arch, enum set_arch type);
+static void show_architecture (char *, int);
+static void set_architecture (char *, int);
+static void info_architecture (char *, int);
+static void set_architecture_from_file (bfd *);
+
+/* Do the real work of changing the current architecture */
+
+static int
+arch_ok (const struct bfd_arch_info *arch)
+{
+ /* Should be performing the more basic check that the binary is
+ compatible with GDB. */
+ /* Check with the target that the architecture is valid. */
+ return (target_architecture_hook == NULL
+ || target_architecture_hook (arch));
+}
+
+static void
+set_arch (const struct bfd_arch_info *arch,
+ enum set_arch type)
+{
+ switch (type)
+ {
+ case set_arch_auto:
+ if (!arch_ok (arch))
+ warning ("Target may not support %s architecture",
+ arch->printable_name);
+ target_architecture = arch;
+ break;
+ case set_arch_manual:
+ if (!arch_ok (arch))
+ {
+ printf_unfiltered ("Target does not support \`%s' architecture.\n",
+ arch->printable_name);
+ }
+ else
+ {
+ target_architecture_auto = 0;
+ target_architecture = arch;
+ }
+ break;
+ }
+ if (gdbarch_debug)
+ gdbarch_dump ();
+}
+
+/* Called if the user enters \`\`show architecture'' without an argument. */
+static void
+show_architecture (char *args, int from_tty)
+{
+ const char *arch;
+ arch = TARGET_ARCHITECTURE->printable_name;
+ if (target_architecture_auto)
+ printf_filtered ("The target architecture is set automatically (currently %s)\n", arch);
+ else
+ printf_filtered ("The target architecture is assumed to be %s\n", arch);
+}
+
+/* Called if the user enters \`\`set architecture'' with or without an
+ argument. */
+static void
+set_architecture (char *args, int from_tty)
+{
+ if (args == NULL)
+ {
+ printf_unfiltered ("\"set architecture\" must be followed by \"auto\" or an architecture name.\n");
+ }
+ else if (strcmp (args, "auto") == 0)
+ {
+ target_architecture_auto = 1;
+ }
+ else if (GDB_MULTI_ARCH)
+ {
+ const struct bfd_arch_info *arch = bfd_scan_arch (args);
+ if (arch == NULL)
+ printf_unfiltered ("Architecture \`%s' not reconized.\n", args);
+ else
+ {
+ struct gdbarch_info info;
+ memset (&info, 0, sizeof info);
+ info.bfd_arch_info = arch;
+ if (gdbarch_update (info))
+ target_architecture_auto = 0;
+ else
+ printf_unfiltered ("Architecture \`%s' not reconized.\n", args);
+ }
+ }
+ else
+ {
+ const struct bfd_arch_info *arch = bfd_scan_arch (args);
+ if (arch != NULL)
+ set_arch (arch, set_arch_manual);
+ else
+ printf_unfiltered ("Architecture \`%s' not reconized.\n", args);
+ }
+}
+
+/* Called if the user enters \`\`info architecture'' without an argument. */
+static void
+info_architecture (char *args, int from_tty)
+{
+ enum bfd_architecture a;
+ if (GDB_MULTI_ARCH)
+ {
+ if (gdbarch_init_registrary != NULL)
+ {
+ struct gdbarch_init_registration *rego;
+ printf_filtered ("Available architectures are:\n");
+ for (rego = gdbarch_init_registrary;
+ rego != NULL;
+ rego = rego->next)
+ {
+ const struct bfd_arch_info *ap;
+ ap = bfd_lookup_arch (rego->bfd_architecture, 0);
+ if (ap != NULL)
+ {
+ do
+ {
+ printf_filtered (" %s", ap->printable_name);
+ ap = ap->next;
+ }
+ while (ap != NULL);
+ printf_filtered ("\n");
+ }
+ }
+ }
+ else
+ {
+ printf_filtered ("There are no available architectures.\n");
+ }
+ return;
+ }
+ printf_filtered ("Available architectures are:\n");
+ for (a = bfd_arch_obscure + 1; a < bfd_arch_last; a++)
+ {
+ const struct bfd_arch_info *ap = bfd_lookup_arch (a, 0);
+ if (ap != NULL)
+ {
+ do
+ {
+ printf_filtered (" %s", ap->printable_name);
+ ap = ap->next;
+ }
+ while (ap != NULL);
+ printf_filtered ("\n");
+ }
+ }
+}
+
+/* Set the architecture from arch/machine */
+void
+set_architecture_from_arch_mach (arch, mach)
+ enum bfd_architecture arch;
+ unsigned long mach;
+{
+ const struct bfd_arch_info *wanted = bfd_lookup_arch (arch, mach);
+ if (wanted != NULL)
+ set_arch (wanted, set_arch_manual);
+ else
+ internal_error ("gdbarch: hardwired architecture/machine not reconized");
+}
+
+/* Set the architecture from a BFD */
+static void
+set_architecture_from_file (bfd *abfd)
+{
+ const struct bfd_arch_info *wanted = bfd_get_arch_info (abfd);
+ if (target_architecture_auto)
+ {
+ set_arch (wanted, set_arch_auto);
+ }
+ else if (wanted != target_architecture)
+ {
+ warning ("%s architecture file may be incompatible with %s target.",
+ wanted->printable_name,
+ target_architecture->printable_name);
+ }
+}
+
+
+/* Misc helper functions for targets. */
+
+int
+frame_num_args_unknown (fi)
+ struct frame_info *fi;
+{
+ return -1;
+}
+
+
+int
+generic_register_convertible_not (num)
+ int num;
+{
+ return 0;
+}
+
+/* Disassembler */
+
+/* Pointer to the target-dependent disassembly function. */
+int (*tm_print_insn) (bfd_vma, disassemble_info *);
+disassemble_info tm_print_insn_info;
+
+
+
+/* Set the dynamic target-system-dependant parameters (architecture,
+ byte-order) using information found in the BFD */
+
+void
+set_gdbarch_from_file (abfd)
+ bfd *abfd;
+{
+ if (GDB_MULTI_ARCH)
+ {
+ struct gdbarch_info info;
+ memset (&info, 0, sizeof info);
+ info.abfd = abfd;
+ gdbarch_update (info);
+ return;
+ }
+ set_architecture_from_file (abfd);
+ set_endian_from_file (abfd);
+}
+
+
+#if defined (CALL_DUMMY)
+/* FIXME - this should go away */
+LONGEST call_dummy_words[] = CALL_DUMMY;
+int sizeof_call_dummy_words = sizeof (call_dummy_words);
+#endif
+
+
+extern void _initialize_gdbarch (void);
+void
+_initialize_gdbarch ()
+{
+ add_prefix_cmd ("endian", class_support, set_endian,
+ "Set endianness of target.",
+ &endianlist, "set endian ", 0, &setlist);
+ add_cmd ("big", class_support, set_endian_big,
+ "Set target as being big endian.", &endianlist);
+ add_cmd ("little", class_support, set_endian_little,
+ "Set target as being little endian.", &endianlist);
+ add_cmd ("auto", class_support, set_endian_auto,
+ "Select target endianness automatically.", &endianlist);
+ add_cmd ("endian", class_support, show_endian,
+ "Show endianness of target.", &showlist);
+
+ add_cmd ("architecture", class_support, set_architecture,
+ "Set architecture of target.", &setlist);
+ add_alias_cmd ("processor", "architecture", class_support, 1, &setlist);
+ add_cmd ("architecture", class_support, show_architecture,
+ "Show architecture of target.", &showlist);
+ add_cmd ("architecture", class_support, info_architecture,
+ "List supported target architectures", &infolist);
+
+ INIT_DISASSEMBLE_INFO_NO_ARCH (tm_print_insn_info, gdb_stdout, (fprintf_ftype)fprintf_filtered);
+ tm_print_insn_info.flavour = bfd_target_unknown_flavour;
+ tm_print_insn_info.read_memory_func = dis_asm_read_memory;
+ tm_print_insn_info.memory_error_func = dis_asm_memory_error;
+ tm_print_insn_info.print_address_func = dis_asm_print_address;
+
+ add_show_from_set (add_set_cmd ("archdebug",
+ class_maintenance,
+ var_zinteger,
+ (char *)&gdbarch_debug,
+ "Set architecture debugging.\n\\
+When non-zero, architecture debugging is enabled.", &setlist),
+ &showlist);
+}
+EOF
+
+# close things off
+exec 1>&2
+#../move-if-change new-gdbarch.c gdbarch.c
+if ! test -r gdbarch.c
+then
+ echo "gdbarch.c missing? cp new-gdbarch.c gdbarch.c" 1>&2
+elif diff -c gdbarch.c new-gdbarch.c
+then
+ echo "gdbarch.c unchanged" 1>&2
+else
+ echo "gdbarch.c has changed? cp new-gdbarch.c gdbarch.c" 1>&2
+fi
#include <stdlib.h>
#include <string.h>
#include <errno.h>
-#include <unistd.h>
#include <io.h>
#include <dpmi.h>
#include <debug/v2load.h>
#include <stdlib.h>
#include <string.h>
-#include <unistd.h>
/* check for the existance of a file, given its full pathname */
int
#include "symfile.h"
#include "objfiles.h"
-/* To support asking "What CPU is this?" */
-#include <unistd.h>
-
/* To support detection of the pseudo-initial frame
that threads have. */
#define THREAD_INITIAL_FRAME_SYMBOL "__pthread_exit"
int gcc_p;
struct type *type;
{
- return (TYPE_LENGTH (type) > 8);
+ return (TYPE_LENGTH (type) > 2 * REGISTER_SIZE);
}
\f
if (elf_unwind_sec)
{
- elf_unwind_size = bfd_section_size (objfile->obfd, elf_unwind_sec); /* purecov: deadcode */
- elf_unwind_entries = elf_unwind_size / UNWIND_ENTRY_SIZE; /* purecov: deadcode */
+ elf_unwind_size = bfd_section_size (objfile->obfd, elf_unwind_sec);
+ elf_unwind_entries = elf_unwind_size / UNWIND_ENTRY_SIZE;
}
else
{
{
read_unwind_info (objfile);
if (objfile->obj_private == NULL)
- error ("Internal error reading unwind information."); /* purecov: deadcode */
+ error ("Internal error reading unwind information.");
ui = ((obj_private_data_t *) (objfile->obj_private))->unwind_info;
}
}
/* Called when no unwind descriptor was found for PC. Returns 1 if it
- appears that PC is in a linker stub. */
+ appears that PC is in a linker stub.
+
+ ?!? Need to handle stubs which appear in PA64 code. */
static int
pc_in_linker_stub (pc)
return read_memory_integer (frame->frame + PC_REGNUM * 4,
TARGET_PTR_BIT / 8) & ~0x3;
+ if ((frame->pc >= frame->frame
+ && frame->pc <= (frame->frame
+ /* A call dummy is sized in words, but it is
+ actually a series of instructions. Account
+ for that scaling factor. */
+ + ((REGISTER_SIZE / INSTRUCTION_SIZE)
+ * CALL_DUMMY_LENGTH)
+ /* Similarly we have to account for 64bit
+ wide register saves. */
+ + (32 * REGISTER_SIZE)
+ /* We always consider FP regs 8 bytes long. */
+ + (NUM_REGS - FP0_REGNUM) * 8
+ /* Similarly we have to account for 64bit
+ wide register saves. */
+ + (6 * REGISTER_SIZE))))
+ {
+ return read_memory_integer ((frame->frame
+ + (TARGET_PTR_BIT == 64 ? -16 : -20)),
+ TARGET_PTR_BIT / 8) & ~0x3;
+ }
+
#ifdef FRAME_SAVED_PC_IN_SIGTRAMP
/* Deal with signal handler caller frames too. */
if (frame->signal_handler_caller)
target_read_memory (value_return_addr, (char *) &stub_addr, sizeof (stub_addr));
if (stub_addr <= 0)
- error ("call to __d_shl_get failed, error code is %d", err_value); /* purecov: deadcode */
+ error ("call to __d_shl_get failed, error code is %d", err_value);
return (stub_addr);
}
if (pc == dyncall || pc == sr4export)
return 1;
+ minsym = lookup_minimal_symbol_by_pc (pc);
+ if (minsym && strcmp (SYMBOL_NAME (minsym), ".stub") == 0)
+ return 1;
+
/* Get the unwind descriptor corresponding to PC, return zero
if no unwind was found. */
u = find_unwind_entry (pc);
}
/* Should never happen. */
- warning ("Unable to find branch in parameter relocation stub.\n"); /* purecov: deadcode */
- return 0; /* purecov: deadcode */
+ warning ("Unable to find branch in parameter relocation stub.\n");
+ return 0;
}
/* Unknown stub type. For now, just return zero. */
- return 0; /* purecov: deadcode */
+ return 0;
}
/* Return one if PC is in the return path of a trampoline, else return zero.
}
/* Should never happen. */
- warning ("Unable to find branch in parameter relocation stub.\n"); /* purecov: deadcode */
- return 0; /* purecov: deadcode */
+ warning ("Unable to find branch in parameter relocation stub.\n");
+ return 0;
}
/* Unknown stub type. For now, just return zero. */
- return 0; /* purecov: deadcode */
+ return 0;
}
if ((inst & 0xffe00000) == 0x6fc00000)
return extract_14 (inst);
+ /* std,ma X,D(sp) */
+ if ((inst & 0xffe00008) == 0x73c00008)
+ return (inst & 0x1 ? -1 << 16 : 0) | (((inst >> 4) & 0x3ff) << 3);
+
/* addil high21,%r1; ldo low11,(%r1),%r30)
save high bits in save_high21 for later use. */
if ((inst & 0xffe00000) == 0x28200000)
if (inst == 0x6bc23fd9 || inst == 0x0fc212c1)
save_rp = 0;
- /* This is the only way we save SP into the stack. At this time
+ /* These are the only ways we save SP into the stack. At this time
the HP compilers never bother to save SP into the stack. */
- if ((inst & 0xffffc000) == 0x6fc10000)
+ if ((inst & 0xffffc000) == 0x6fc10000
+ || (inst & 0xffffc00c) == 0x73c10008)
save_sp = 0;
/* Account for general and floating-point register saves. */
/* Note the interesting effects of this instruction. */
stack_remaining -= prologue_inst_adjust_sp (inst);
- /* There is only one instruction used for saving RP into the stack. */
- if (inst == 0x6bc23fd9)
+ /* There are limited ways to store the return pointer into the
+ stack. */
+ if (inst == 0x6bc23fd9 || inst == 0x0fc212c1)
{
save_rp = 0;
frame_saved_regs->regs[RP_REGNUM] = frame_info->frame - 20;
}
- /* Just note that we found the save of SP into the stack. The
- value for frame_saved_regs was computed above. */
- if ((inst & 0xffffc000) == 0x6fc10000)
- save_sp = 0;
+ /* Note if we saved SP into the stack. This also happens to indicate
+ the location of the saved frame pointer. */
+ if ((inst & 0xffffc000) == 0x6fc10000
+ || (inst & 0xffffc00c) == 0x73c10008)
+ {
+ frame_saved_regs->regs[FP_REGNUM] = frame_info->frame;
+ save_sp = 0;
+ }
/* Account for general and floating-point register saves. */
reg = inst_saves_gr (inst);
if ((inst >> 26) == 0x1b
&& extract_14 (inst) >= 0)
frame_saved_regs->regs[reg] = frame_info->frame;
+ /* A std has explicit post_modify forms. */
+ else if ((inst & 0xfc00000c0) == 0x70000008)
+ frame_saved_regs->regs[reg] = frame_info->frame;
else
{
+ CORE_ADDR offset;
+
+ if ((inst >> 26) == 0x1c)
+ offset = (inst & 0x1 ? -1 << 16 : 0) | (((inst >> 4) & 0x3ff) << 3);
+ else if ((inst >> 26) == 0x03)
+ offset = low_sign_extend (inst & 0x1f, 5);
+ else
+ offset = extract_14 (inst);
+
/* Handle code with and without frame pointers. */
if (u->Save_SP)
frame_saved_regs->regs[reg]
- = frame_info->frame + extract_14 (inst);
+ = frame_info->frame + offset;
else
frame_saved_regs->regs[reg]
- = frame_info->frame + (u->Total_frame_size << 3)
- + extract_14 (inst);
+ = (frame_info->frame + (u->Total_frame_size << 3)
+ + offset);
}
}
}
else
{
- warning ("Internal error: Invalid inferior pid? Cannot intercept exception events."); /* purecov: deadcode */
- return (struct symtab_and_line *) -1; /* purecov: deadcode */
+ warning ("Internal error: Invalid inferior pid? Cannot intercept exception events.");
+ return (struct symtab_and_line *) -1;
}
}
return (struct symtab_and_line *) -1;
}
break;
- default: /* purecov: deadcode */
- error ("Request to enable unknown or unsupported exception event."); /* purecov: deadcode */
+ default:
+ error ("Request to enable unknown or unsupported exception event.");
}
/* Copy break address into new sal struct, malloc'ing if needed. */
#include "target.h"
#include "inferior.h"
#include <fcntl.h>
-#include <unistd.h>
#include <sys/stat.h>
#include "gdbcore.h"
return (-1);
}
-
/* scan for the sequence $<data>#<checksum> */
-void getpacket(buffer)
-char * buffer;
+
+unsigned char *
+getpacket (buffer)
+ unsigned char *buffer;
{
unsigned char checksum;
unsigned char xmitcsum;
- int i;
- int count;
+ int count;
char ch;
- do {
- /* wait around for the start character, ignore all other characters */
- while ((ch = (getDebugChar() & 0x7f)) != '$');
- checksum = 0;
- xmitcsum = -1;
-
- count = 0;
-
- /* now, read until a # or end of buffer is found */
- while (count < BUFMAX) {
- ch = getDebugChar() & 0x7f;
- if (ch == '#') break;
- checksum = checksum + ch;
- buffer[count] = ch;
- count = count + 1;
- }
- buffer[count] = 0;
-
- if (ch == '#') {
- xmitcsum = hex(getDebugChar() & 0x7f) << 4;
- xmitcsum += hex(getDebugChar() & 0x7f);
- if ((remote_debug ) && (checksum != xmitcsum)) {
- fprintf (stderr ,"bad checksum. My count = 0x%x, sent=0x%x. buf=%s\n",
- checksum,xmitcsum,buffer);
- }
-
- if (checksum != xmitcsum) putDebugChar('-'); /* failed checksum */
- else {
- putDebugChar('+'); /* successful transfer */
- /* if a sequence char is present, reply the sequence ID */
- if (buffer[2] == ':') {
- putDebugChar( buffer[0] );
- putDebugChar( buffer[1] );
- /* remove sequence chars from buffer */
- count = strlen(buffer);
- for (i=3; i <= count; i++) buffer[i-3] = buffer[i];
- }
- }
+ while (1)
+ {
+ /* wait around for the start character, ignore all other characters */
+ while ((ch = getDebugChar ()) != '$')
+ ;
+
+retry:
+ checksum = 0;
+ xmitcsum = -1;
+ count = 0;
+
+ /* now, read until a # or end of buffer is found */
+ while (count < BUFMAX)
+ {
+ ch = getDebugChar ();
+ if (ch == '$')
+ goto retry;
+ if (ch == '#')
+ break;
+ checksum = checksum + ch;
+ buffer[count] = ch;
+ count = count + 1;
+ }
+ buffer[count] = 0;
+
+ if (ch == '#')
+ {
+ ch = getDebugChar ();
+ xmitcsum = hex (ch) << 4;
+ ch = getDebugChar ();
+ xmitcsum += hex (ch);
+
+ if (checksum != xmitcsum)
+ {
+ if (remote_debug)
+ {
+ fprintf (stderr,
+ "bad checksum. My count = 0x%x, sent=0x%x. buf=%s\n",
+ checksum, xmitcsum, buffer);
+ }
+ putDebugChar ('-'); /* failed checksum */
+ }
+ else
+ {
+ putDebugChar ('+'); /* successful transfer */
+
+ /* if a sequence char is present, reply the sequence ID */
+ if (buffer[2] == ':')
+ {
+ putDebugChar (buffer[0]);
+ putDebugChar (buffer[1]);
+
+ return &buffer[3];
+ }
+
+ return &buffer[0];
+ }
+ }
}
- } while (checksum != xmitcsum);
-
}
/* send the packet in buffer. */
-
void putpacket(buffer)
-char * buffer;
+ unsigned char *buffer;
{
unsigned char checksum;
int count;
putDebugChar(hexchars[checksum >> 4]);
putDebugChar(hexchars[checksum % 16]);
- } while ((getDebugChar() & 0x7f) != '+');
+ } while (getDebugChar() != '+');
}
*/
void handle_exception(int exceptionVector)
{
- int sigval;
+ int sigval, stepping;
int addr, length;
char * ptr;
int newPC;
putpacket(remcomOutBuffer);
+ stepping = 0;
+
while (1==1) {
error = 0;
remcomOutBuffer[0] = 0;
- getpacket(remcomInBuffer);
- switch (remcomInBuffer[0]) {
+ ptr = getpacket(remcomInBuffer);
+
+ switch (*ptr++) {
case '?' : remcomOutBuffer[0] = 'S';
remcomOutBuffer[1] = hexchars[sigval >> 4];
remcomOutBuffer[2] = hexchars[sigval % 16];
mem2hex((char*) registers, remcomOutBuffer, NUMREGBYTES, 0);
break;
case 'G' : /* set the value of the CPU registers - return OK */
- hex2mem(&remcomInBuffer[1], (char*) registers, NUMREGBYTES, 0);
+ hex2mem(ptr, (char*) registers, NUMREGBYTES, 0);
strcpy(remcomOutBuffer,"OK");
break;
case 'P' : /* set the value of a single CPU register - return OK */
{
int regno;
- ptr = &remcomInBuffer[1];
if (hexToInt (&ptr, ®no) && *ptr++ == '=')
if (regno >= 0 && regno < NUMREGS)
{
/* mAA..AA,LLLL Read LLLL bytes at address AA..AA */
case 'm' :
/* TRY TO READ %x,%x. IF SUCCEED, SET PTR = 0 */
- ptr = &remcomInBuffer[1];
if (hexToInt(&ptr,&addr))
if (*(ptr++) == ',')
if (hexToInt(&ptr,&length))
if (ptr)
{
strcpy(remcomOutBuffer,"E01");
- debug_error("malformed read memory command: %s",remcomInBuffer);
}
break;
/* MAA..AA,LLLL: Write LLLL bytes at address AA.AA return OK */
case 'M' :
/* TRY TO READ '%x,%x:'. IF SUCCEED, SET PTR = 0 */
- ptr = &remcomInBuffer[1];
if (hexToInt(&ptr,&addr))
if (*(ptr++) == ',')
if (hexToInt(&ptr,&length))
if (ptr)
{
strcpy(remcomOutBuffer,"E02");
- debug_error("malformed write memory command: %s",remcomInBuffer);
}
break;
/* cAA..AA Continue at address AA..AA(optional) */
/* sAA..AA Step one instruction from AA..AA(optional) */
- case 'c' :
case 's' :
+ stepping = 1;
+ case 'c' :
/* try to read optional parameter, pc unchanged if no parm */
- ptr = &remcomInBuffer[1];
if (hexToInt(&ptr,&addr))
registers[ PC ] = addr;
registers[ PS ] &= 0xfffffeff;
/* set the trace bit if we're stepping */
- if (remcomInBuffer[0] == 's') registers[ PS ] |= 0x100;
+ if (stepping) registers[ PS ] |= 0x100;
/*
* If we found a match for the PC AND we are not returning
control to the inferior which you don't want showing up in your
control variables. */
-#ifdef __STDC__
struct inferior_status;
-#endif
extern struct inferior_status *save_inferior_status PARAMS ((int));
#include "gdb_string.h"
#include <signal.h>
#include <fcntl.h>
-#ifdef HAVE_UNISTD_H
-#include <unistd.h>
-#endif
#ifdef HAVE_SYS_SELECT_H
#include <sys/select.h>
#endif
void handle_inferior_event (struct execution_control_state * ecs);
+static void check_sigtramp2 (struct execution_control_state *ecs);
+static void stop_stepping (struct execution_control_state *ecs);
+static void prepare_to_wait (struct execution_control_state *ecs);
+
/* Wait for control to return from inferior to debugger.
If inferior gets a signal, we may decide to start it up again
instead of returning. That is why there is a loop in this function.
else
target_resume (-1, 0, TARGET_SIGNAL_0);
ecs->infwait_state = infwait_normal_state;
- goto wfi_continue;
+ prepare_to_wait (ecs);
+ return;
case infwait_nullified_state:
break;
make progress. */
target_resume (-1, 0, TARGET_SIGNAL_0);
- goto wfi_continue;
+ prepare_to_wait (ecs);
+ return;
#endif
}
}
#endif
resume (0, TARGET_SIGNAL_0);
- goto wfi_continue;
+ prepare_to_wait (ecs);
+ return;
case TARGET_WAITKIND_SPURIOUS:
resume (0, TARGET_SIGNAL_0);
- goto wfi_continue;
+ prepare_to_wait (ecs);
+ return;
case TARGET_WAITKIND_EXITED:
target_terminal_ours (); /* Must do this before mourn anyway */
target_mourn_inferior ();
singlestep_breakpoints_inserted_p = 0; /*SOFTWARE_SINGLE_STEP_P */
stop_print_frame = 0;
- goto stop_stepping;
+ stop_stepping (ecs);
+ return;
case TARGET_WAITKIND_SIGNALLED:
stop_print_frame = 0;
printf_filtered ("The program no longer exists.\n");
gdb_flush (gdb_stdout);
singlestep_breakpoints_inserted_p = 0; /*SOFTWARE_SINGLE_STEP_P */
- goto stop_stepping;
+ stop_stepping (ecs);
+ return;
/* The following are the only cases in which we keep going;
the above cases end in a continue or goto. */
pending_follow.fork_event.saw_parent_fork = 1;
pending_follow.fork_event.parent_pid = ecs->pid;
pending_follow.fork_event.child_pid = ecs->ws.value.related_pid;
- goto wfi_continue;
+ prepare_to_wait (ecs);
+ return;
}
else
{
if (follow_vfork_when_exec)
{
target_resume (ecs->pid, 0, TARGET_SIGNAL_0);
- goto wfi_continue;
+ prepare_to_wait (ecs);
+ return;
}
}
if (pending_follow.kind == TARGET_WAITKIND_VFORKED)
ENSURE_VFORKING_PARENT_REMAINS_STOPPED (pending_follow.fork_event.parent_pid);
target_resume (ecs->pid, 0, TARGET_SIGNAL_0);
- goto wfi_continue;
+ prepare_to_wait (ecs);
+ return;
}
inferior_ignoring_leading_exec_events =
target_reported_exec_events_per_exec_call () - 1;
if (RESUME_EXECD_VFORKING_CHILD_TO_GET_PARENT_VFORK ())
target_resume (ecs->pid, 1, TARGET_SIGNAL_0);
/* We expect the parent vfork event to be available now. */
- goto wfi_continue;
+ prepare_to_wait (ecs);
+ return;
}
/* This causes the eventpoints and symbol table to be reset. Must
TARGET_DISABLE_HW_WATCHPOINTS (inferior_pid);
}
resume (0, TARGET_SIGNAL_0);
- goto wfi_continue;
+ prepare_to_wait (ecs);
+ return;
/* Before examining the threads further, step this thread to
get it entirely out of the syscall. (We get notice of the
ecs->enable_hw_watchpoints_after_wait =
(number_of_threads_in_syscalls == 0);
}
- goto wfi_continue;
+ prepare_to_wait (ecs);
+ return;
case TARGET_WAITKIND_STOPPED:
stop_signal = ecs->ws.value.sig;
if (ecs->new_thread_event)
{
target_resume (-1, 0, TARGET_SIGNAL_0);
- goto wfi_continue;
+ prepare_to_wait (ecs);
+ return;
}
stop_pc = read_pc_pid (ecs->pid);
ecs->waiton_pid = ecs->pid;
ecs->wp = &(ecs->ws);
ecs->infwait_state = infwait_thread_hop_state;
- goto wfi_continue;
+ prepare_to_wait (ecs);
+ return;
}
/* We need to restart all the threads now,
target_resume (ecs->pid, 0, TARGET_SIGNAL_0);
else
target_resume (-1, 0, TARGET_SIGNAL_0);
- goto wfi_continue;
+ prepare_to_wait (ecs);
+ return;
}
else
{
stop_signal = TARGET_SIGNAL_0;
target_resume (ecs->pid, 0, stop_signal);
- goto wfi_continue;
+ prepare_to_wait (ecs);
+ return;
}
/* It's a SIGTRAP or a signal we're interested in. Switch threads,
ecs->infwait_state = infwait_nullified_state;
ecs->waiton_pid = ecs->pid;
ecs->wp = &(ecs->tmpstatus);
- goto wfi_continue;
+ prepare_to_wait (ecs);
+ return;
}
/* It may not be necessary to disable the watchpoint to stop over
if (HAVE_STEPPABLE_WATCHPOINT && STOPPED_BY_WATCHPOINT (ecs->ws))
{
resume (1, 0);
- goto wfi_continue;
+ prepare_to_wait (ecs);
+ return;
}
/* It is far more common to need to disable a watchpoint to step
ecs->waiton_pid = ecs->pid;
ecs->wp = &(ecs->ws);
ecs->infwait_state = infwait_nonstep_watch_state;
- goto wfi_continue;
+ prepare_to_wait (ecs);
+ return;
}
/* It may be possible to simply continue after a watchpoint. */
if (stop_signal == TARGET_SIGNAL_TRAP && stop_after_trap)
{
stop_print_frame = 0;
- goto wfi_break;
+ stop_stepping (ecs);
+ return;
}
if (stop_soon_quietly)
- goto wfi_break;
+ {
+ stop_stepping (ecs);
+ return;
+ }
/* Don't even think about breakpoints
if just proceeded over a breakpoint.
gdb_flush (gdb_stdout);
}
if (signal_stop[stop_signal])
- goto wfi_break;
+ {
+ stop_stepping (ecs);
+ return;
+ }
/* If not going to stop, give terminal back
if we took it away. */
else if (printed)
this probably breaks that. As with anything else, it's up to
the HP-UX maintainer to furnish a fix that doesn't break other
platforms. --JimB, 20 May 1999 */
- goto check_sigtramp2;
+ check_sigtramp2 (ecs);
}
/* Handle cases caused by hitting a breakpoint. */
through_sigtramp_breakpoint via the cleanup chain, so
no need to worry about it here. */
- goto stop_stepping;
+ stop_stepping (ecs);
+ return;
case BPSTAT_WHAT_STOP_SILENT:
stop_print_frame = 0;
through_sigtramp_breakpoint via the cleanup chain, so
no need to worry about it here. */
- goto stop_stepping;
+ stop_stepping (ecs);
+ return;
case BPSTAT_WHAT_STEP_RESUME:
/* This proably demands a more elegant solution, but, yeah
if (stop_on_solib_events)
{
stop_print_frame = 0;
- goto stop_stepping;
+ stop_stepping (ecs);
+ return;
}
/* If we stopped due to an explicit catchpoint, then the
stop_bpstat = bpstat_copy (ecs->stepping_through_solib_catchpoints);
bpstat_clear (&ecs->stepping_through_solib_catchpoints);
stop_print_frame = 1;
- goto stop_stepping;
+ stop_stepping (ecs);
+ return;
}
if (!CALL_DUMMY_BREAKPOINT_OFFSET_P)
#ifdef HP_OS_BUG
trap_expected_after_continue = 1;
#endif
- goto wfi_break;
+ stop_stepping (ecs);
+ return;
}
}
if (step_resume_breakpoint)
- /* Having a step-resume breakpoint overrides anything
- else having to do with stepping commands until
- that breakpoint is reached. */
- /* I'm not sure whether this needs to be check_sigtramp2 or
- whether it could/should be keep_going. */
- goto check_sigtramp2;
-
+ {
+ /* Having a step-resume breakpoint overrides anything
+ else having to do with stepping commands until
+ that breakpoint is reached. */
+ /* I'm not sure whether this needs to be check_sigtramp2 or
+ whether it could/should be keep_going. */
+ check_sigtramp2 (ecs);
+ goto keep_going;
+ }
+
if (step_range_end == 0)
- /* Likewise if we aren't even stepping. */
- /* I'm not sure whether this needs to be check_sigtramp2 or
- whether it could/should be keep_going. */
- goto check_sigtramp2;
+ {
+ /* Likewise if we aren't even stepping. */
+ /* I'm not sure whether this needs to be check_sigtramp2 or
+ whether it could/should be keep_going. */
+ check_sigtramp2 (ecs);
+ goto keep_going;
+ }
/* If stepping through a line, keep going if still within it.
{
/* We might be doing a BPSTAT_WHAT_SINGLE and getting a signal.
So definately need to check for sigtramp here. */
- goto check_sigtramp2;
+ check_sigtramp2 (ecs);
+ goto keep_going;
}
/* We stepped out of the stepping range. */
supposed to be stepping at the assembly language level
("stepi"). Just stop. */
stop_step = 1;
- goto wfi_break;
+ stop_stepping (ecs);
+ return;
}
if (step_over_calls > 0 || IGNORE_HELPER_CALL (stop_pc))
{
/* We are already there: stop now. */
stop_step = 1;
- goto wfi_break;
+ stop_stepping (ecs);
+ return;
}
else
/* Put the step-breakpoint there and go until there. */
/* It is stepi or nexti. We always want to stop stepping after
one instruction. */
stop_step = 1;
- goto wfi_break;
+ stop_stepping (ecs);
+ return;
}
/* If we're in the return path from a shared library trampoline,
when we do "s" in a function with no line numbers,
or can this happen as a result of a return or longjmp?). */
stop_step = 1;
- goto wfi_break;
+ stop_stepping (ecs);
+ return;
}
if ((stop_pc == ecs->sal.pc)
That is said to make things like for (;;) statements work
better. */
stop_step = 1;
- goto wfi_break;
+ stop_stepping (ecs);
+ return;
}
/* We aren't done stepping.
in which after skipping the prologue we better stop even though
we will be in mid-line. */
stop_step = 1;
- goto wfi_break;
+ stop_stepping (ecs);
+ return;
}
step_range_start = ecs->sal.pc;
step_range_end = ecs->sal.end;
step_frame_address = current_frame;
}
-
- goto keep_going;
-
- check_sigtramp2:
- if (trap_expected
- && IN_SIGTRAMP (stop_pc, ecs->stop_func_name)
- && !IN_SIGTRAMP (prev_pc, prev_func_name)
- && INNER_THAN (read_sp (), step_sp))
- {
- /* What has happened here is that we have just stepped the inferior
- with a signal (because it is a signal which shouldn't make
- us stop), thus stepping into sigtramp.
-
- So we need to set a step_resume_break_address breakpoint
- and continue until we hit it, and then step. FIXME: This should
- be more enduring than a step_resume breakpoint; we should know
- that we will later need to keep going rather than re-hitting
- the breakpoint here (see testsuite/gdb.t06/signals.exp where
- it says "exceedingly difficult"). */
- struct symtab_and_line sr_sal;
-
- INIT_SAL (&sr_sal); /* initialize to zeroes */
- sr_sal.pc = prev_pc;
- sr_sal.section = find_pc_overlay (sr_sal.pc);
- /* We perhaps could set the frame if we kept track of what
- the frame corresponding to prev_pc was. But we don't,
- so don't. */
- through_sigtramp_breakpoint =
- set_momentary_breakpoint (sr_sal, NULL, bp_through_sigtramp);
- if (breakpoints_inserted)
- insert_breakpoints ();
-
- ecs->remove_breakpoints_on_following_step = 1;
- ecs->another_trap = 1;
- }
-
keep_going:
/* Come to this label when you need to resume the inferior.
It's really much cleaner to do a goto than a maze of if-else
{
breakpoints_failed = insert_breakpoints ();
if (breakpoints_failed)
- goto wfi_break;
+ {
+ stop_stepping (ecs);
+ return;
+ }
breakpoints_inserted = 1;
}
resume (currently_stepping (ecs), stop_signal);
}
- /* Former continues in the main loop goto here. */
- wfi_continue:
- /* This used to be at the top of the loop. */
- if (ecs->infwait_state == infwait_normal_state)
- {
- overlay_cache_invalid = 1;
+ prepare_to_wait (ecs);
+ return;
- /* We have to invalidate the registers BEFORE calling
- target_wait because they can be loaded from the target
- while in target_wait. This makes remote debugging a bit
- more efficient for those targets that provide critical
- registers as part of their normal status mechanism. */
+ } /* extra brace, to preserve old indentation */
- registers_changed ();
- ecs->waiton_pid = -1;
- ecs->wp = &(ecs->ws);
- }
- /* This is the old end of the while loop. Let everybody know
- we want to wait for the inferior some more and get called
- again soon. */
- ecs->wait_some_more = 1;
- return;
- }
+ stop_stepping (ecs);
+}
+
+/* Are we in the middle of stepping? */
+
+static int
+currently_stepping (struct execution_control_state *ecs)
+{
+ return ((through_sigtramp_breakpoint == NULL
+ && !ecs->handling_longjmp
+ && ((step_range_end && step_resume_breakpoint == NULL)
+ || trap_expected))
+ || ecs->stepping_through_solib_after_catch
+ || bpstat_should_step ());
+}
- /* Former breaks in the main loop goto here. */
-wfi_break:
+static void
+check_sigtramp2 (struct execution_control_state *ecs)
+{
+ if (trap_expected
+ && IN_SIGTRAMP (stop_pc, ecs->stop_func_name)
+ && !IN_SIGTRAMP (prev_pc, prev_func_name)
+ && INNER_THAN (read_sp (), step_sp))
+ {
+ /* What has happened here is that we have just stepped the
+ inferior with a signal (because it is a signal which
+ shouldn't make us stop), thus stepping into sigtramp.
+
+ So we need to set a step_resume_break_address breakpoint and
+ continue until we hit it, and then step. FIXME: This should
+ be more enduring than a step_resume breakpoint; we should
+ know that we will later need to keep going rather than
+ re-hitting the breakpoint here (see the testsuite,
+ gdb.base/signals.exp where it says "exceedingly difficult"). */
+
+ struct symtab_and_line sr_sal;
+
+ INIT_SAL (&sr_sal); /* initialize to zeroes */
+ sr_sal.pc = prev_pc;
+ sr_sal.section = find_pc_overlay (sr_sal.pc);
+ /* We perhaps could set the frame if we kept track of what the
+ frame corresponding to prev_pc was. But we don't, so don't. */
+ through_sigtramp_breakpoint =
+ set_momentary_breakpoint (sr_sal, NULL, bp_through_sigtramp);
+ if (breakpoints_inserted)
+ insert_breakpoints ();
-stop_stepping:
+ ecs->remove_breakpoints_on_following_step = 1;
+ ecs->another_trap = 1;
+ }
+}
+
+static void
+stop_stepping (struct execution_control_state *ecs)
+{
if (target_has_execution)
{
/* Are we stopping for a vfork event? We only stop when we see
the child's event. However, we may not yet have seen the
- parent's event. And, inferior_pid is still set to the parent's
- pid, until we resume again and follow either the parent or child.
+ parent's event. And, inferior_pid is still set to the
+ parent's pid, until we resume again and follow either the
+ parent or child.
To ensure that we can really touch inferior_pid (aka, the
parent process) -- which calls to functions like read_pc
prev_func_start = ecs->stop_func_start;
prev_func_name = ecs->stop_func_name;
}
+
/* Let callers know we don't want to wait for the inferior anymore. */
ecs->wait_some_more = 0;
}
-/* Are we in the middle of stepping? */
+/* This function normally comes after a resume, before
+ handle_inferior_event exits. It takes care of any last bits of
+ housekeeping, and sets the all-important wait_some_more flag. */
-static int
-currently_stepping (struct execution_control_state *ecs)
+static void
+prepare_to_wait (struct execution_control_state *ecs)
{
- return ((through_sigtramp_breakpoint == NULL
- && !ecs->handling_longjmp
- && ((step_range_end && step_resume_breakpoint == NULL)
- || trap_expected))
- || ecs->stepping_through_solib_after_catch
- || bpstat_should_step ());
+ if (ecs->infwait_state == infwait_normal_state)
+ {
+ overlay_cache_invalid = 1;
+
+ /* We have to invalidate the registers BEFORE calling
+ target_wait because they can be loaded from the target while
+ in target_wait. This makes remote debugging a bit more
+ efficient for those targets that provide critical registers
+ as part of their normal status mechanism. */
+
+ registers_changed ();
+ ecs->waiton_pid = -1;
+ ecs->wp = &(ecs->ws);
+ }
+ /* This is the old end of the while loop. Let everybody know we
+ want to wait for the inferior some more and get called again
+ soon. */
+ ecs->wait_some_more = 1;
}
/* This function returns TRUE if ep is an internal breakpoint
cleanup_sigint_signal_handler ();
display_gdb_prompt (0);
}
+ else
+ {
+ if (exec_done_display_p)
+ printf_unfiltered ("completed.\n");
+ }
}
/* Here to return control to GDB when the inferior stops for real.
/* "wait.h" fills in the gaps left by <wait.h> */
#include "wait.h"
-#ifdef HAVE_UNISTD_H
-#include <unistd.h>
-#endif
extern struct symtab_and_line *
child_enable_exception_callback PARAMS ((enum exception_event_kind, int));
#include <sys/ioctl.h>
#include <sys/ttrace.h>
-#ifdef HAVE_UNISTD_H
-#include <unistd.h>
-#endif
#include <sys/mman.h>
#ifndef NO_PTRACE_H
hack that DDE uses, of pawing through the process' data
segment to find the pathname.
*/
- top_of_stack = 0x7b03a000;
+ top_of_stack = (TARGET_PTR_BIT == 64 ? 0x800003ffff7f0000 : 0x7b03a000);
name_index = 0;
done = 0;
#if !defined (LANGUAGE_H)
#define LANGUAGE_H 1
-#ifdef __STDC__ /* Forward decls for prototypes */
+/* Forward decls for prototypes */
struct value;
struct objfile;
struct expression;
/* enum exp_opcode; ANSI's `wisdom' didn't include forward enum decls. */
-#endif
/* This used to be included to configure GDB for one or more specific
languages. Now it is shortcutted to configure for all of them. FIXME. */
static int computeSignal(int);
static void putpacket(unsigned char *);
-static void getpacket(unsigned char *);
+static unsigned char *getpacket(unsigned char *);
static unsigned char *mem2hex(unsigned char *, unsigned char *, int, int);
static unsigned char *hex2mem(unsigned char *, unsigned char *, int, int);
void
handle_exception(int exceptionVector)
{
- int sigval;
+ int sigval, stepping;
int addr, length, i;
unsigned char * ptr;
unsigned char buf[16];
putpacket(remcomOutBuffer);
+ stepping = 0;
+
while (1==1) {
remcomOutBuffer[0] = 0;
- getpacket(remcomInBuffer);
+ ptr = getpacket(remcomInBuffer);
binary = 0;
- switch (remcomInBuffer[0]) {
+ switch (*ptr++) {
default: /* Unknown code. Return an empty reply message. */
break;
case 'R':
- ptr = &remcomInBuffer[1];
if (hexToInt (&ptr, &addr))
registers[PC] = addr;
strcpy(remcomOutBuffer, "OK");
case 'M': /* MAA..AA,LLLL: Write LLLL bytes at address AA.AA return OK */
/* TRY TO READ '%x,%x:'. IF SUCCEED, SET PTR = 0 */
{
- ptr = &remcomInBuffer[1];
if (hexToInt(&ptr,&addr))
if (*(ptr++) == ',')
if (hexToInt(&ptr,&length))
if (ptr)
{
strcpy(remcomOutBuffer,"E02");
- gdb_error("malformed write memory command: %s",
- remcomInBuffer);
}
}
break;
case 'm': /* mAA..AA,LLLL Read LLLL bytes at address AA..AA */
/* TRY TO READ %x,%x. IF SUCCEED, SET PTR = 0 */
- ptr = &remcomInBuffer[1];
if (hexToInt(&ptr,&addr))
if (*(ptr++) == ',')
if (hexToInt(&ptr,&length))
if (ptr)
{
strcpy(remcomOutBuffer,"E01");
- gdb_error("malformed read memory command: %s",
- remcomInBuffer);
}
break;
case '?':
{
int regno;
- ptr = &remcomInBuffer[1];
if (hexToInt (&ptr, ®no) && *ptr++ == '=')
if (regno >= 0 && regno < NUMREGS)
{
break;
}
case 'G': /* set the value of the CPU registers - return OK */
- hex2mem(&remcomInBuffer[1], (unsigned char*) registers, NUMREGBYTES, 0);
+ hex2mem(&ptr, (unsigned char*) registers, NUMREGBYTES, 0);
strcpy(remcomOutBuffer,"OK");
break;
case 's': /* sAA..AA Step one instruction from AA..AA(optional) */
+ stepping = 1;
case 'c': /* cAA..AA Continue from address AA..AA(optional) */
/* try to read optional parameter, pc unchanged if no parm */
- ptr = &remcomInBuffer[1];
if (hexToInt(&ptr,&addr))
registers[ PC ] = addr;
- if (remcomInBuffer[0] == 's') /* single-stepping */
+ if (stepping) /* single-stepping */
{
if (!prepare_to_step(0)) /* set up for single-step */
{
break;
#endif
case 'q':
- ptr = &remcomInBuffer[1];
if (*ptr++ == 'C' &&
*ptr++ == 'R' &&
*ptr++ == 'C' &&
/* scan for the sequence $<data>#<checksum> */
-static void
-getpacket(buffer)
- unsigned char * buffer;
+unsigned char *
+getpacket (buffer)
+ unsigned char *buffer;
{
unsigned char checksum;
unsigned char xmitcsum;
- int i;
- int count;
- unsigned char ch;
+ int count;
+ char ch;
- do {
- /* wait around for the start character, ignore all other characters */
- while ((ch = getDebugChar()) != '$');
- checksum = 0;
- xmitcsum = -1;
+ while (1)
+ {
+ /* wait around for the start character, ignore all other characters */
+ while ((ch = getDebugChar ()) != '$')
+ ;
- count = 0;
+retry:
+ checksum = 0;
+ xmitcsum = -1;
+ count = 0;
- /* now, read until a # or end of buffer is found */
- while (count < BUFMAX) {
- ch = getDebugChar();
-
- if (ch == '#' && (count == 0 || buffer[count-1] != 0x7d))
- break;
+ /* now, read until a # or end of buffer is found */
+ while (count < BUFMAX)
+ {
+ ch = getDebugChar ();
+ if (ch == '$')
+ goto retry;
+ if (ch == '#')
+ break;
+ checksum = checksum + ch;
+ buffer[count] = ch;
+ count = count + 1;
+ }
+ buffer[count] = 0;
- checksum = checksum + ch;
- buffer[count] = ch;
- count = count + 1;
- }
- buffer[count] = 0;
-
- if (ch == '#') {
- xmitcsum = hex(getDebugChar()) << 4;
- xmitcsum += hex(getDebugChar());
- if (checksum != xmitcsum) {
- if (remote_debug) {
- unsigned char buf[16];
-
- mem2hex((unsigned char *) &checksum, buf, 4, 0);
- gdb_error("Bad checksum: my count = %s, ", buf);
- mem2hex((unsigned char *) &xmitcsum, buf, 4, 0);
- gdb_error("sent count = %s\n", buf);
- gdb_error(" -- Bad buffer: \"%s\"\n", buffer);
- }
+ if (ch == '#')
+ {
+ ch = getDebugChar ();
+ xmitcsum = hex (ch) << 4;
+ ch = getDebugChar ();
+ xmitcsum += hex (ch);
+
+ if (checksum != xmitcsum)
+ {
+ if (remote_debug)
+ {
+ unsigned char buf[16];
+
+ mem2hex((unsigned char *) &checksum, buf, 4, 0);
+ gdb_error("Bad checksum: my count = %s, ", buf);
+ mem2hex((unsigned char *) &xmitcsum, buf, 4, 0);
+ gdb_error("sent count = %s\n", buf);
+ gdb_error(" -- Bad buffer: \"%s\"\n", buffer);
+ }
+ putDebugChar ('-'); /* failed checksum */
+ }
+ else
+ {
+ putDebugChar ('+'); /* successful transfer */
+
+ /* if a sequence char is present, reply the sequence ID */
+ if (buffer[2] == ':')
+ {
+ putDebugChar (buffer[0]);
+ putDebugChar (buffer[1]);
+
+ return &buffer[3];
+ }
- putDebugChar('-'); /* failed checksum */
- } else {
- putDebugChar('+'); /* successful transfer */
- /* if a sequence char is present, reply the sequence ID */
- if (buffer[2] == ':') {
- putDebugChar( buffer[0] );
- putDebugChar( buffer[1] );
- /* remove sequence chars from buffer */
- count = strlen(buffer);
- for (i=3; i <= count; i++) buffer[i-3] = buffer[i];
+ return &buffer[0];
+ }
}
- }
}
- } while (checksum != xmitcsum);
}
/* send the packet in buffer. */
}
-/* scan for the sequence $<data>#<checksum> */
-void getpacket(buffer)
-char * buffer;
+unsigned char *
+getpacket (unsigned char *buffer)
{
unsigned char checksum;
unsigned char xmitcsum;
- int i;
- int count;
+ int count;
char ch;
-
- do {
- /* wait around for the start character, ignore all other characters */
- while ((ch = (getDebugChar() & 0x7f)) != '$');
- checksum = 0;
- xmitcsum = -1;
-
- count = 0;
-
- /* now, read until a # or end of buffer is found */
- while (count < BUFMAX) {
- ch = getDebugChar() & 0x7f;
- if (ch == '#') break;
- checksum = checksum + ch;
- buffer[count] = ch;
- count = count + 1;
- }
- buffer[count] = 0;
-
- if (ch == '#') {
- xmitcsum = hex(getDebugChar() & 0x7f) << 4;
- xmitcsum += hex(getDebugChar() & 0x7f);
- if ((remote_debug ) && (checksum != xmitcsum)) {
- fprintf (stderr,"bad checksum. My count = 0x%x, sent=0x%x. buf=%s\n",
- checksum,xmitcsum,buffer);
- }
-
- if (checksum != xmitcsum) putDebugChar('-'); /* failed checksum */
- else {
- putDebugChar('+'); /* successful transfer */
- /* if a sequence char is present, reply the sequence ID */
- if (buffer[2] == ':') {
- putDebugChar( buffer[0] );
- putDebugChar( buffer[1] );
- /* remove sequence chars from buffer */
- count = strlen(buffer);
- for (i=3; i <= count; i++) buffer[i-3] = buffer[i];
- }
- }
- }
- } while (checksum != xmitcsum);
-
+
+ while (1)
+ {
+ /* wait around for the start character, ignore all other characters */
+ while ((ch = getDebugChar ()) != '$')
+ ;
+
+retry:
+ checksum = 0;
+ xmitcsum = -1;
+ count = 0;
+
+ /* now, read until a # or end of buffer is found */
+ while (count < BUFMAX)
+ {
+ ch = getDebugChar ();
+ if (ch == '$')
+ goto retry;
+ if (ch == '#')
+ break;
+ checksum = checksum + ch;
+ buffer[count] = ch;
+ count = count + 1;
+ }
+ buffer[count] = 0;
+
+ if (ch == '#')
+ {
+ ch = getDebugChar ();
+ xmitcsum = hex (ch) << 4;
+ ch = getDebugChar ();
+ xmitcsum += hex (ch);
+
+ if (checksum != xmitcsum)
+ {
+ if (remote_debug)
+ {
+ fprintf (stderr,
+ "bad checksum. My count = 0x%x, sent=0x%x. buf=%s\n",
+ checksum, xmitcsum, buffer);
+ }
+ putDebugChar ('-'); /* failed checksum */
+ }
+ else
+ {
+ putDebugChar ('+'); /* successful transfer */
+
+ /* if a sequence char is present, reply the sequence ID */
+ if (buffer[2] == ':')
+ {
+ putDebugChar (buffer[0]);
+ putDebugChar (buffer[1]);
+
+ return &buffer[3];
+ }
+
+ return &buffer[0];
+ }
+ }
+ }
}
/* send the packet in buffer. */
*/
void handle_exception(int exceptionVector)
{
- int sigval;
+ int sigval, stepping;
int addr, length;
char * ptr;
int newPC;
putpacket(remcomOutBuffer);
+ stepping = 0;
+
while (1==1) {
error = 0;
remcomOutBuffer[0] = 0;
- getpacket(remcomInBuffer);
- switch (remcomInBuffer[0]) {
+ ptr = getpacket(remcomInBuffer);
+ switch (*ptr++) {
case '?' : remcomOutBuffer[0] = 'S';
remcomOutBuffer[1] = hexchars[sigval >> 4];
remcomOutBuffer[2] = hexchars[sigval % 16];
mem2hex((char*) registers, remcomOutBuffer, NUMREGBYTES);
break;
case 'G' : /* set the value of the CPU registers - return OK */
- hex2mem(&remcomInBuffer[1], (char*) registers, NUMREGBYTES);
+ hex2mem(&ptr, (char*) registers, NUMREGBYTES);
strcpy(remcomOutBuffer,"OK");
break;
exceptionHandler(2,handle_buserror);
/* TRY TO READ %x,%x. IF SUCCEED, SET PTR = 0 */
- ptr = &remcomInBuffer[1];
if (hexToInt(&ptr,&addr))
if (*(ptr++) == ',')
if (hexToInt(&ptr,&length))
if (ptr)
{
strcpy(remcomOutBuffer,"E01");
- debug_error("malformed read memory command: %s",remcomInBuffer);
- }
- }
- else {
+ }
+ } else {
exceptionHandler(2,_catchException);
strcpy(remcomOutBuffer,"E03");
debug_error("bus error");
- }
+ }
/* restore handler for bus error */
exceptionHandler(2,_catchException);
exceptionHandler(2,handle_buserror);
/* TRY TO READ '%x,%x:'. IF SUCCEED, SET PTR = 0 */
- ptr = &remcomInBuffer[1];
if (hexToInt(&ptr,&addr))
if (*(ptr++) == ',')
if (hexToInt(&ptr,&length))
if (ptr)
{
strcpy(remcomOutBuffer,"E02");
- debug_error("malformed write memory command: %s",remcomInBuffer);
- }
- }
- else {
+ }
+ } else {
exceptionHandler(2,_catchException);
strcpy(remcomOutBuffer,"E03");
debug_error("bus error");
- }
+ }
/* restore handler for bus error */
exceptionHandler(2,_catchException);
/* cAA..AA Continue at address AA..AA(optional) */
/* sAA..AA Step one instruction from AA..AA(optional) */
- case 'c' :
case 's' :
+ stepping = 1;
+ case 'c' :
/* try to read optional parameter, pc unchanged if no parm */
- ptr = &remcomInBuffer[1];
if (hexToInt(&ptr,&addr))
registers[ PC ] = addr;
registers[ PS ] &= 0x7fff;
/* set the trace bit if we're stepping */
- if (remcomInBuffer[0] == 's') registers[ PS ] |= 0x8000;
+ if (stepping) registers[ PS ] |= 0x8000;
/*
* look for newPC in the linked list of exception frames.
#include "target.h"
#include "inferior.h"
#include "call-cmds.h"
-#ifdef HAVE_UNISTD_H
-#include <unistd.h>
-#endif
#include "getopt.h"
Report bugs to \"bug-gdb@prep.ai.mit.edu\".\
", stream);
}
-\f
-
-/* All TUI I/O sent to the *_filtered and *_unfiltered functions
- eventually ends up here. The fputs_unfiltered_hook is primarily
- used by GUIs to collect all output and send it to the GUI, instead
- of the controlling terminal. Only output to gdb_stdout and
- gdb_stderr are sent to the hook. Everything else is sent on to
- fputs to allow file I/O to be handled appropriately. */
-
-/* FIXME: Should be broken up and moved to a TUI specific file. */
-
-void
-tui_file_fputs (linebuffer, file)
- const char *linebuffer;
- GDB_FILE *file;
-{
- struct tui_stream *stream = gdb_file_data (file);
-#if defined(TUI)
- extern int tui_owns_terminal;
-#endif
- /* If anything (GUI, TUI) wants to capture GDB output, this is
- * the place... the way to do it is to set up
- * fputs_unfiltered_hook.
- * Our TUI ("gdb -tui") used to hook output, but in the
- * new (XDB style) scheme, we do not do that anymore... - RT
- */
- if (fputs_unfiltered_hook
- && (file == gdb_stdout
- || file == gdb_stderr))
- fputs_unfiltered_hook (linebuffer, file);
- else
- {
-#if defined(TUI)
- if (tui_version && tui_owns_terminal)
- {
- /* If we get here somehow while updating the TUI (from
- * within a tuiDo(), then we need to temporarily
- * set up the terminal for GDB output. This probably just
- * happens on error output.
- */
-
- if (stream->ts_streamtype == astring)
- {
- gdb_file_adjust_strbuf (strlen (linebuffer), stream);
- strcat (stream->ts_strbuf, linebuffer);
- }
- else
- {
- tuiTermUnsetup (0, (tui_version) ? cmdWin->detail.commandInfo.curch : 0);
- fputs (linebuffer, stream->ts_filestream);
- tuiTermSetup (0);
- if (linebuffer[strlen (linebuffer) - 1] == '\n')
- tuiClearCommandCharCount ();
- else
- tuiIncrCommandCharCountBy (strlen (linebuffer));
- }
- }
- else
- {
- /* The normal case - just do a fputs() */
- if (stream->ts_streamtype == astring)
- {
- gdb_file_adjust_strbuf (strlen (linebuffer), stream);
- strcat (stream->ts_strbuf, linebuffer);
- }
- else
- fputs (linebuffer, stream->ts_filestream);
- }
-
-
-#else
- if (stream->ts_streamtype == astring)
- {
- gdb_file_adjust_strbuf (strlen (linebuffer), file);
- strcat (stream->ts_strbuf, linebuffer);
- }
- else
- fputs (linebuffer, stream->ts_filestream);
-#endif
- }
-}
#include "objfiles.h"
#include "value.h"
-#ifdef HAVE_UNISTD_H
-#include <unistd.h>
-#endif
-
extern void _initialize_maint_cmds PARAMS ((void));
static void maintenance_command PARAMS ((char *, int));
Boston, MA 02111-1307, USA. */
/* Forward decl's for prototypes */
-#ifdef __STDC__
struct target_ops;
struct objfile;
struct section_offsets;
-#endif
/* Called to add symbols from a shared library to gdb's symbol table. */
#include "gdb_string.h"
#include <stropts.h>
#include <poll.h>
-#include <unistd.h>
#include "gdb_stat.h"
#include "inferior.h"
#include "symfile.h"
#include "remote-utils.h"
#include "gdb_string.h"
-#ifdef HAVE_UNISTD_H
-#include <unistd.h>
-#endif
#include "gdbcore.h"
+#ifdef HAVE_TIME_H
+#include <time.h>
+#endif
extern struct target_ops remote_rdp_ops;
static serial_t io;
static void check_binary_download PARAMS ((CORE_ADDR addr));
-#if __STDC__
struct packet_config;
-#endif
static void show_packet_config_cmd PARAMS ((struct packet_config * config));
#define SCM_CODE(x) SCM_CAR(SCM_CLOSCAR (x))
#define SCM_MAKINUM(x) (((x)<<2)+2L)
-#ifdef __STDC__ /* Forward decls for prototypes */
+/* Forward decls for prototypes */
struct value;
-#endif
extern int scm_value_print PARAMS ((struct value *, GDB_FILE *,
int, enum val_prettyprint));
#include <sys/socket.h>
#include <sys/time.h>
#include <fcntl.h>
-#ifdef HAVE_UNISTD_H
-#include <unistd.h>
-#endif
#include "signals.h"
#include "gdb_string.h"
#include <arpa/inet.h>
#include <netdb.h>
#include <sys/socket.h>
-#ifdef HAVE_UNISTD_H
-#include <unistd.h>
-#endif
#ifndef __CYGWIN32__
#include <netinet/tcp.h>
#include <fcntl.h>
#include <sys/types.h>
#include "terminal.h"
-#ifdef HAVE_UNISTD_H
-#include <unistd.h>
-#endif
#ifdef HAVE_TERMIOS
static char *mem2hex (char *, char *, int);
static char *hex2mem (char *, char *, int);
static int hexToInt (char **, int *);
-static void getpacket (char *);
+static unsigned char *getpacket (unsigned char *);
static void putpacket (char *);
static void handle_buserror (void);
static int computeSignal (int exceptionVector);
/* scan for the sequence $<data>#<checksum> */
-static
-void
-getpacket (char *buffer)
+char *
+getpacket (buffer)
+ char *buffer;
{
unsigned char checksum;
unsigned char xmitcsum;
- int i;
int count;
char ch;
- do
+
+ while (1)
{
/* wait around for the start character, ignore all other characters */
- while ((ch = getDebugChar ()) != '$');
+ while ((ch = getDebugChar ()) != '$')
+ ;
+
+retry:
checksum = 0;
xmitcsum = -1;
-
count = 0;
/* now, read until a # or end of buffer is found */
while (count < BUFMAX)
{
ch = getDebugChar ();
+ if (ch == '$')
+ goto retry;
if (ch == '#')
break;
checksum = checksum + ch;
if (ch == '#')
{
- xmitcsum = hex (getDebugChar ()) << 4;
- xmitcsum += hex (getDebugChar ());
+ ch = getDebugChar ();
+ xmitcsum = hex (ch) << 4;
+ ch = getDebugChar ();
+ xmitcsum += hex (ch);
+
if (checksum != xmitcsum)
- putDebugChar ('-'); /* failed checksum */
+ {
+ putDebugChar ('-'); /* failed checksum */
+ }
else
{
putDebugChar ('+'); /* successful transfer */
+
/* if a sequence char is present, reply the sequence ID */
if (buffer[2] == ':')
{
putDebugChar (buffer[0]);
putDebugChar (buffer[1]);
- /* remove sequence chars from buffer */
- count = strlen (buffer);
- for (i = 3; i <= count; i++)
- buffer[i - 3] = buffer[i];
+
+ return &buffer[3];
}
+
+ return &buffer[0];
}
}
}
- while (checksum != xmitcsum);
-
}
putDebugChar (lowhex(checksum));
}
while (getDebugChar() != '+');
-
}
void
gdb_handle_exception (int exceptionVector)
{
- int sigval;
+ int sigval, stepping;
int addr, length;
char *ptr;
*/
undoSStep ();
+ stepping = 0;
+
while (1)
{
remcomOutBuffer[0] = 0;
- getpacket (remcomInBuffer);
+ ptr = getpacket (remcomInBuffer);
- switch (remcomInBuffer[0])
+ switch (*ptr++)
{
case '?':
remcomOutBuffer[0] = 'S';
mem2hex ((char *) registers, remcomOutBuffer, NUMREGBYTES);
break;
case 'G': /* set the value of the CPU registers - return OK */
- hex2mem (&remcomInBuffer[1], (char *) registers, NUMREGBYTES);
+ hex2mem (&ptr, (char *) registers, NUMREGBYTES);
strcpy (remcomOutBuffer, "OK");
break;
{
dofault = 0;
/* TRY, TO READ %x,%x. IF SUCCEED, SET PTR = 0 */
- ptr = &remcomInBuffer[1];
if (hexToInt (&ptr, &addr))
if (*(ptr++) == ',')
if (hexToInt (&ptr, &length))
dofault = 0;
/* TRY, TO READ '%x,%x:'. IF SUCCEED, SET PTR = 0 */
- ptr = &remcomInBuffer[1];
if (hexToInt (&ptr, &addr))
if (*(ptr++) == ',')
if (hexToInt (&ptr, &length))
/* cAA..AA Continue at address AA..AA(optional) */
/* sAA..AA Step one instruction from AA..AA(optional) */
- case 'c':
case 's':
+ stepping = 1;
+ case 'c':
{
/* tRY, to read optional parameter, pc unchanged if no parm */
- ptr = &remcomInBuffer[1];
if (hexToInt (&ptr, &addr))
registers[PC] = addr;
- if (remcomInBuffer[0] == 's')
+ if (stepping)
doSStep ();
}
return;
#include "target.h"
#include "inferior.h"
#include <fcntl.h>
-#include <unistd.h>
#include <sys/stat.h>
#include <dlfcn.h>
#include "gdbcmd.h"
#include "gdb_string.h"
#include <sys/param.h>
#include <fcntl.h>
-#include <unistd.h>
#ifndef SVR4_SHARED_LIBS
/* SunOS shared libs need the nlist structure. */
return (lm);
}
+#ifdef SVR4_SHARED_LIBS
+/*
+
+ LOCAL FUNCTION
+
+ open_exec_file_object
+
+ SYNOPSIS
+
+ void open_symbol_file_object (int from_tty)
+
+ DESCRIPTION
+
+ If no open symbol file, attempt to locate and open the main symbol
+ file. On SVR4 systems, this is the first link map entry. If its
+ name is here, we can open it. Useful when attaching to a process
+ without first loading its symbol file.
+
+ */
+
+int
+open_symbol_file_object (arg)
+ PTR arg;
+{
+ int from_tty = (int) arg; /* sneak past catch_errors */
+ struct link_map *lm, lmcopy;
+ char *filename;
+ int errcode;
+
+ if (symfile_objfile)
+ if (!query ("Attempt to reload symbols from process? "))
+ return 0;
+
+ if ((debug_base = locate_base ()) == 0)
+ return 0; /* failed somehow... */
+
+ /* First link map member should be the executable. */
+ if ((lm = first_link_map_member ()) == NULL)
+ return 0; /* failed somehow... */
+
+ /* Read from target memory to GDB. */
+ read_memory ((CORE_ADDR) lm, (void *) &lmcopy, sizeof (lmcopy));
+
+ if (lmcopy.l_name == 0)
+ return 0; /* no filename. */
+
+ /* Now fetch the filename from target memory. */
+ target_read_string ((CORE_ADDR) lmcopy.l_name, &filename,
+ MAX_PATH_SIZE - 1, &errcode);
+ if (errcode)
+ {
+ warning ("failed to read exec filename from attached file: %s",
+ safe_strerror (errcode));
+ return 0;
+ }
+
+ make_cleanup ((make_cleanup_func) free, (void *) filename);
+ /* Have a pathname: read the symbol file. */
+ symbol_file_command (filename, from_tty);
+
+ return 1;
+}
+#endif /* SVR4_SHARED_LIBS */
+
/*
LOCAL FUNCTION
int count;
int old;
+#ifdef SVR4_SHARED_LIBS
+ /* If we are attaching to a running process for which we
+ have not opened a symbol file, we may be able to get its
+ symbols now! */
+ if (attach_flag &&
+ symfile_objfile == NULL)
+ catch_errors (open_symbol_file_object, (PTR) from_tty,
+ "Error reading attached process's symbol file.\n",
+ RETURN_MASK_ALL);
+
+#endif SVR4_SHARED_LIBS
+
if ((re_err = re_comp (arg_string ? arg_string : ".")) != NULL)
{
error ("Invalid regexp: %s", re_err);
Foundation, Inc., 59 Temple Place - Suite 330,
Boston, MA 02111-1307, USA. */
-#ifdef __STDC__ /* Forward decl's for prototypes */
+/* Forward decl's for prototypes */
struct target_ops;
-#endif
/* Called when we free all symtabs, to free the shared library information
as well. */
Written by the Center for Software Science at the Univerity of Utah
and by Cygnus Support. */
-#ifdef __STDC__ /* Forward decl's for prototypes */
+/* Forward decl's for prototypes */
struct target_ops;
struct objfile;
struct section_offsets;
-#endif
/* Called to add symbols from a shared library to gdb's symbol table. */
#include "gdb_string.h"
#include "gdb_stat.h"
#include <fcntl.h>
-#ifdef HAVE_UNISTD_H
-#include <unistd.h>
-#endif
#include "gdbcore.h"
#include "gnu-regex.h"
#include "symfile.h"
/* scan for the sequence $<data>#<checksum> */
-static void
-getpacket(buffer)
- char *buffer;
+unsigned char *
+getpacket (buffer)
+ unsigned char *buffer;
{
unsigned char checksum;
unsigned char xmitcsum;
- int i;
int count;
- unsigned char ch;
+ char ch;
- do
+ while (1)
{
/* wait around for the start character, ignore all other characters */
- while ((ch = (getDebugChar() & 0x7f)) != '$') ;
+ while ((ch = getDebugChar ()) != '$')
+ ;
+retry:
checksum = 0;
xmitcsum = -1;
-
count = 0;
/* now, read until a # or end of buffer is found */
while (count < BUFMAX)
{
- ch = getDebugChar() & 0x7f;
+ ch = getDebugChar ();
+ if (ch == '$')
+ goto retry;
if (ch == '#')
break;
checksum = checksum + ch;
buffer[count] = ch;
count = count + 1;
}
-
- if (count >= BUFMAX)
- continue;
-
buffer[count] = 0;
if (ch == '#')
{
- xmitcsum = hex(getDebugChar() & 0x7f) << 4;
- xmitcsum |= hex(getDebugChar() & 0x7f);
-#if 0
- /* Humans shouldn't have to figure out checksums to type to it. */
- putDebugChar ('+');
- return;
-#endif
+ ch = getDebugChar ();
+ xmitcsum = hex (ch) << 4;
+ ch = getDebugChar ();
+ xmitcsum += hex (ch);
+
if (checksum != xmitcsum)
- putDebugChar('-'); /* failed checksum */
+ {
+ putDebugChar ('-'); /* failed checksum */
+ }
else
{
- putDebugChar('+'); /* successful transfer */
+ putDebugChar ('+'); /* successful transfer */
+
/* if a sequence char is present, reply the sequence ID */
if (buffer[2] == ':')
{
- putDebugChar(buffer[0]);
- putDebugChar(buffer[1]);
- /* remove sequence chars from buffer */
- count = strlen(buffer);
- for (i=3; i <= count; i++)
- buffer[i-3] = buffer[i];
+ putDebugChar (buffer[0]);
+ putDebugChar (buffer[1]);
+
+ return &buffer[3];
}
+
+ return &buffer[0];
}
}
}
- while (checksum != xmitcsum);
}
/* send the packet in buffer. */
putDebugChar(hexchars[checksum & 0xf]);
}
- while ((getDebugChar() & 0x7f) != '+');
+ while (getDebugChar() != '+');
}
static char remcomInBuffer[BUFMAX];
{
remcomOutBuffer[0] = 0;
- getpacket(remcomInBuffer);
- switch (remcomInBuffer[0])
+ ptr = getpacket(remcomInBuffer);
+ switch (*ptr++)
{
case '?':
remcomOutBuffer[0] = 'S';
remcomOutBuffer[3] = 0;
break;
- case 'd':
- /* toggle debug flag */
+ case 'd': /* toggle debug flag */
break;
case 'g': /* return the value of the CPU registers */
psr = registers[PSR];
- ptr = &remcomInBuffer[1];
hex2mem(ptr, (char *)registers, 16 * 4, 0); /* G & O regs */
hex2mem(ptr + 16 * 4 * 2, sp + 0, 16 * 4, 0); /* L & I regs */
hex2mem(ptr + 64 * 4 * 2, (char *)®isters[Y],
case 'm': /* mAA..AA,LLLL Read LLLL bytes at address AA..AA */
/* Try to read %x,%x. */
- ptr = &remcomInBuffer[1];
-
if (hexToInt(&ptr, &addr)
&& *ptr++ == ','
&& hexToInt(&ptr, &length))
case 'M': /* MAA..AA,LLLL: Write LLLL bytes at address AA.AA return OK */
/* Try to read '%x,%x:'. */
- ptr = &remcomInBuffer[1];
-
if (hexToInt(&ptr, &addr)
&& *ptr++ == ','
&& hexToInt(&ptr, &length)
case 'c': /* cAA..AA Continue at address AA..AA(optional) */
/* try to read optional parameter, pc unchanged if no parm */
- ptr = &remcomInBuffer[1];
if (hexToInt(&ptr, &addr))
{
registers[PC] = addr;
int baudrate;
extern void set_timer_3();
- ptr = &remcomInBuffer[1];
if (!hexToInt(&ptr, &baudrate))
{
strcpy(remcomOutBuffer,"B01");
nasty interactions between app code and the stub (for instance if user steps
into strlen, etc..) */
-static int
-strlen (const char *s)
-{
- const char *s1 = s;
-
- while (*s1++ != '\000');
-
- return s1 - s;
-}
-
static char *
strcpy (char *dst, const char *src)
{
/* scan for the sequence $<data>#<checksum> */
-static void
-getpacket(buffer)
- char *buffer;
+unsigned char *
+getpacket (buffer)
+ unsigned char *buffer;
{
unsigned char checksum;
unsigned char xmitcsum;
- int i;
int count;
- unsigned char ch;
+ char ch;
- do
+ while (1)
{
/* wait around for the start character, ignore all other characters */
- while ((ch = (getDebugChar() & 0x7f)) != '$') ;
+ while ((ch = getDebugChar ()) != '$')
+ ;
+retry:
checksum = 0;
xmitcsum = -1;
-
count = 0;
/* now, read until a # or end of buffer is found */
while (count < BUFMAX)
{
- ch = getDebugChar() & 0x7f;
+ ch = getDebugChar ();
+ if (ch == '$')
+ goto retry;
if (ch == '#')
break;
checksum = checksum + ch;
buffer[count] = ch;
count = count + 1;
}
-
- if (count >= BUFMAX)
- continue;
-
buffer[count] = 0;
if (ch == '#')
{
- xmitcsum = hex(getDebugChar() & 0x7f) << 4;
- xmitcsum |= hex(getDebugChar() & 0x7f);
-#if 0
- /* Humans shouldn't have to figure out checksums to type to it. */
- putDebugChar ('+');
- return;
-#endif
+ ch = getDebugChar ();
+ xmitcsum = hex (ch) << 4;
+ ch = getDebugChar ();
+ xmitcsum += hex (ch);
+
if (checksum != xmitcsum)
- putDebugChar('-'); /* failed checksum */
+ {
+ putDebugChar ('-'); /* failed checksum */
+ }
else
{
- putDebugChar('+'); /* successful transfer */
+ putDebugChar ('+'); /* successful transfer */
+
/* if a sequence char is present, reply the sequence ID */
if (buffer[2] == ':')
{
- putDebugChar(buffer[0]);
- putDebugChar(buffer[1]);
- /* remove sequence chars from buffer */
- count = strlen(buffer);
- for (i=3; i <= count; i++)
- buffer[i-3] = buffer[i];
+ putDebugChar (buffer[0]);
+ putDebugChar (buffer[1]);
+
+ return &buffer[3];
}
+
+ return &buffer[0];
}
}
}
- while (checksum != xmitcsum);
}
/* send the packet in buffer. */
putDebugChar(hexchars[checksum & 0xf]);
}
- while ((getDebugChar() & 0x7f) != '+');
+ while (getDebugChar() != '+');
}
static char remcomInBuffer[BUFMAX];
{
remcomOutBuffer[0] = 0;
- getpacket(remcomInBuffer);
- switch (remcomInBuffer[0])
+ ptr = getpacket(remcomInBuffer);
+ switch (*ptr++)
{
case '?':
remcomOutBuffer[0] = 'S';
psr = registers[PSR];
- ptr = &remcomInBuffer[1];
-
- if (remcomInBuffer[0] == 'P')
+ if (ptr[-1] == 'P')
{
int regno;
case 'm': /* mAA..AA,LLLL Read LLLL bytes at address AA..AA */
/* Try to read %x,%x. */
- ptr = &remcomInBuffer[1];
-
if (hexToInt(&ptr, &addr)
&& *ptr++ == ','
&& hexToInt(&ptr, &length))
case 'M': /* MAA..AA,LLLL: Write LLLL bytes at address AA.AA return OK */
/* Try to read '%x,%x:'. */
- ptr = &remcomInBuffer[1];
-
if (hexToInt(&ptr, &addr)
&& *ptr++ == ','
&& hexToInt(&ptr, &length)
case 'c': /* cAA..AA Continue at address AA..AA(optional) */
/* try to read optional parameter, pc unchanged if no parm */
-
- ptr = &remcomInBuffer[1];
if (hexToInt(&ptr, &addr))
{
registers[PC] = addr;
int baudrate;
extern void set_timer_3();
- ptr = &remcomInBuffer[1];
if (!hexToInt(&ptr, &baudrate))
{
strcpy(remcomOutBuffer,"B01");
#if (!defined(__GO32__) && !defined(_WIN32)) || defined(__CYGWIN32__)
#define HAVE_SOCKETS
#include <sys/time.h>
-#include <unistd.h>
#include <sys/socket.h>
#include <netinet/in.h>
#include <netdb.h>
/* scan for the sequence $<data>#<checksum> */
-static void
-getpacket(buffer)
- char *buffer;
+unsigned char *
+getpacket (buffer)
+ unsigned char *buffer;
{
unsigned char checksum;
unsigned char xmitcsum;
- int i;
int count;
- unsigned char ch;
+ char ch;
- do
+ while (1)
{
/* wait around for the start character, ignore all other characters */
- while ((ch = (getDebugChar() & 0x7f)) != '$')
+ while ((ch = getDebugChar ()) != '$')
;
+retry:
checksum = 0;
xmitcsum = -1;
-
count = 0;
/* now, read until a # or end of buffer is found */
while (count < BUFMAX)
{
- ch = getDebugChar() & 0x7f;
+ ch = getDebugChar ();
+ if (ch == '$')
+ goto retry;
if (ch == '#')
break;
checksum = checksum + ch;
buffer[count] = ch;
count = count + 1;
}
-
- if (count >= BUFMAX)
- continue;
-
buffer[count] = 0;
if (ch == '#')
{
- xmitcsum = hex(ch = getDebugChar() & 0x7f) << 4;
- xmitcsum |= hex(ch = getDebugChar() & 0x7f);
+ ch = getDebugChar ();
+ xmitcsum = hex (ch) << 4;
+ ch = getDebugChar ();
+ xmitcsum += hex (ch);
if (checksum != xmitcsum)
- putDebugChar('-'); /* failed checksum */
+ {
+ putDebugChar ('-'); /* failed checksum */
+ }
else
{
- putDebugChar('+'); /* successful transfer */
+ putDebugChar ('+'); /* successful transfer */
+
/* if a sequence char is present, reply the sequence ID */
if (buffer[2] == ':')
{
- putDebugChar(buffer[0]);
- putDebugChar(buffer[1]);
- /* remove sequence chars from buffer */
- count = strlen(buffer);
- for (i=3; i <= count; i++)
- buffer[i-3] = buffer[i];
+ putDebugChar (buffer[0]);
+ putDebugChar (buffer[1]);
+
+ return &buffer[3];
}
+
+ return &buffer[0];
}
}
}
- while (checksum != xmitcsum);
}
/* send the packet in buffer. */
putDebugChar(hexchars[checksum & 0xf]);
}
- while ((getDebugChar() & 0x7f) != '+');
+ while (getDebugChar() != '+');
}
static char remcomInBuffer[BUFMAX];
{
remcomOutBuffer[0] = 0;
- getpacket(remcomInBuffer);
- switch (remcomInBuffer[0])
+ ptr = getpacket(remcomInBuffer);
+ switch (*ptr++)
{
case '?':
remcomOutBuffer[0] = 'S';
psr = registers[PSR];
- ptr = &remcomInBuffer[1];
-
- if (remcomInBuffer[0] == 'P') /* do a single register */
+ if (ptr[-1] == 'P') /* do a single register */
{
int regno;
case 'm': /* mAA..AA,LLLL Read LLLL bytes at address AA..AA */
/* Try to read %x,%x. */
- ptr = &remcomInBuffer[1];
-
if (hexToInt(&ptr, &addr)
&& *ptr++ == ','
&& hexToInt(&ptr, &length))
case 'M': /* MAA..AA,LLLL: Write LLLL bytes at address AA.AA return OK */
/* Try to read '%x,%x:'. */
- ptr = &remcomInBuffer[1];
-
if (hexToInt(&ptr, &addr)
&& *ptr++ == ','
&& hexToInt(&ptr, &length)
case 'c': /* cAA..AA Continue at address AA..AA(optional) */
/* try to read optional parameter, pc unchanged if no parm */
- ptr = &remcomInBuffer[1];
if (hexToInt(&ptr, &addr))
{
registers[PC] = addr;
int baudrate;
extern void set_timer_3();
- ptr = &remcomInBuffer[1];
if (!hexToInt(&ptr, &baudrate))
{
strcpy(remcomOutBuffer,"B01");
#include "gdb_stat.h"
#include <ctype.h>
#include <time.h>
-#ifdef HAVE_UNISTD_H
-#include <unistd.h>
-#endif
#ifndef O_BINARY
#define O_BINARY 0
-/* Print instructions for Tahoe target machines, for GDB.
- Copyright 1986, 1989, 1991, 1992 Free Software Foundation, Inc.
- Contributed by the State University of New York at Buffalo, by the
- Distributed Computer Systems Lab, Department of Computer Science, 1991.
-
- This file is part of GDB.
-
- This program is free software; you can redistribute it and/or modify
- it under the terms of the GNU General Public License as published by
- the Free Software Foundation; either version 2 of the License, or
- (at your option) any later version.
-
- This program is distributed in the hope that it will be useful,
- but WITHOUT ANY WARRANTY; without even the implied warranty of
- MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- GNU General Public License for more details.
-
- You should have received a copy of the GNU General Public License
- along with this program; if not, write to the Free Software
- Foundation, Inc., 59 Temple Place - Suite 330,
- Boston, MA 02111-1307, USA. */
-
-#include "defs.h"
-#include "symtab.h"
-#include "opcode/tahoe.h"
-
-/* Tahoe instructions are never longer than this. */
-#define MAXLEN 62
-
-/* Number of elements in the opcode table. */
-#define NOPCODES (sizeof votstrs / sizeof votstrs[0])
-
-static unsigned char *print_insn_arg ();
-
-/* Advance PC across any function entry prologue instructions
- to reach some "real" code. */
-
-CORE_ADDR
-tahoe_skip_prologue (pc)
- CORE_ADDR pc;
-{
- register int op = (unsigned char) read_memory_integer (pc, 1);
- if (op == 0x11)
- pc += 2; /* skip brb */
- if (op == 0x13)
- pc += 3; /* skip brw */
- if (op == 0x2c
- && ((unsigned char) read_memory_integer (pc + 2, 1)) == 0x5e)
- pc += 3; /* skip subl2 */
- if (op == 0xe9
- && ((unsigned char) read_memory_integer (pc + 1, 1)) == 0xae
- && ((unsigned char) read_memory_integer (pc + 3, 1)) == 0x5e)
- pc += 4; /* skip movab */
- if (op == 0xe9
- && ((unsigned char) read_memory_integer (pc + 1, 1)) == 0xce
- && ((unsigned char) read_memory_integer (pc + 4, 1)) == 0x5e)
- pc += 5; /* skip movab */
- if (op == 0xe9
- && ((unsigned char) read_memory_integer (pc + 1, 1)) == 0xee
- && ((unsigned char) read_memory_integer (pc + 6, 1)) == 0x5e)
- pc += 7; /* skip movab */
- return pc;
-}
-
-/* Return number of args passed to a frame.
- Can return -1, meaning no way to tell. */
-
-int
-tahoe_frame_num_args (fi)
- struct frame_info *fi;
-{
- return (((0xffff & read_memory_integer (((fi)->frame - 4), 4)) - 4) >> 2);
-}
-
-/* Print the Tahoe instruction at address MEMADDR in debugged memory,
- on STREAM. Returns length of the instruction, in bytes. */
-
-int
-tahoe_print_insn (memaddr, stream)
- CORE_ADDR memaddr;
- GDB_FILE *stream;
-{
- unsigned char buffer[MAXLEN];
- register int i;
- register unsigned char *p;
- register char *d;
-
- read_memory (memaddr, buffer, MAXLEN);
-
- for (i = 0; i < NOPCODES; i++)
- if (votstrs[i].detail.code == buffer[0]
- || votstrs[i].detail.code == *(unsigned short *) buffer)
- break;
-
- /* Handle undefined instructions. */
- if (i == NOPCODES)
- {
- fprintf_unfiltered (stream, "0%o", buffer[0]);
- return 1;
- }
-
- fprintf_unfiltered (stream, "%s", votstrs[i].name);
-
- /* Point at first byte of argument data,
- and at descriptor for first argument. */
- p = buffer + 1 + (votstrs[i].detail.code >= 0x100);
- d = votstrs[i].detail.args;
-
- if (*d)
- fputc_unfiltered ('\t', stream);
-
- while (*d)
- {
- p = print_insn_arg (d, p, memaddr + (p - buffer), stream);
- d += 2;
- if (*d)
- fprintf_unfiltered (stream, ",");
- }
- return p - buffer;
-}
-/*******************************************************************/
-static unsigned char *
-print_insn_arg (d, p, addr, stream)
- char *d;
- register char *p;
- CORE_ADDR addr;
- GDB_FILE *stream;
-{
- int temp1 = 0;
- register int regnum = *p & 0xf;
- float floatlitbuf;
-
- if (*d == 'b')
- {
- if (d[1] == 'b')
- fprintf_unfiltered (stream, "0x%x", addr + *p++ + 1);
- else
- {
-
- temp1 = *p;
- temp1 <<= 8;
- temp1 |= *(p + 1);
- fprintf_unfiltered (stream, "0x%x", addr + temp1 + 2);
- p += 2;
- }
- }
- else
- switch ((*p++ >> 4) & 0xf)
- {
- case 0:
- case 1:
- case 2:
- case 3: /* Literal (short immediate byte) mode */
- if (d[1] == 'd' || d[1] == 'f' || d[1] == 'g' || d[1] == 'h')
- {
- *(int *) &floatlitbuf = 0x4000 + ((p[-1] & 0x3f) << 4);
- fprintf_unfiltered (stream, "$%f", floatlitbuf);
- }
- else
- fprintf_unfiltered (stream, "$%d", p[-1] & 0x3f);
- break;
-
- case 4: /* Indexed */
- p = (char *) print_insn_arg (d, p, addr + 1, stream);
- fprintf_unfiltered (stream, "[%s]", REGISTER_NAME (regnum));
- break;
-
- case 5: /* Register */
- fprintf_unfiltered (stream, REGISTER_NAME (regnum));
- break;
-
- case 7: /* Autodecrement */
- fputc_unfiltered ('-', stream);
- case 6: /* Register deferred */
- fprintf_unfiltered (stream, "(%s)", REGISTER_NAME (regnum));
- break;
-
- case 9: /* Absolute Address & Autoincrement deferred */
- fputc_unfiltered ('*', stream);
- if (regnum == PC_REGNUM)
- {
- temp1 = *p;
- temp1 <<= 8;
- temp1 |= *(p + 1);
-
- fputc_unfiltered ('$', stream);
- print_address (temp1, stream);
- p += 4;
- break;
- }
- case 8: /*Immediate & Autoincrement SP */
- if (regnum == 8) /*88 is Immediate Byte Mode */
- fprintf_unfiltered (stream, "$%d", *p++);
-
- else if (regnum == 9) /*89 is Immediate Word Mode */
- {
- temp1 = *p;
- temp1 <<= 8;
- temp1 |= *(p + 1);
- fprintf_unfiltered (stream, "$%d", temp1);
- p += 2;
- }
-
- else if (regnum == PC_REGNUM) /*8F is Immediate Long Mode */
- {
- temp1 = *p;
- temp1 <<= 8;
- temp1 |= *(p + 1);
- temp1 <<= 8;
- temp1 |= *(p + 2);
- temp1 <<= 8;
- temp1 |= *(p + 3);
- fprintf_unfiltered (stream, "$%d", temp1);
- p += 4;
- }
-
- else /*8E is Autoincrement SP Mode */
- fprintf_unfiltered (stream, "(%s)+", REGISTER_NAME (regnum));
- break;
-
- case 11: /* Register + Byte Displacement Deferred Mode */
- fputc_unfiltered ('*', stream);
- case 10: /* Register + Byte Displacement Mode */
- if (regnum == PC_REGNUM)
- print_address (addr + *p + 2, stream);
- else
- fprintf_unfiltered (stream, "%d(%s)", *p, REGISTER_NAME (regnum));
- p += 1;
- break;
-
- case 13: /* Register + Word Displacement Deferred Mode */
- fputc_unfiltered ('*', stream);
- case 12: /* Register + Word Displacement Mode */
- temp1 = *p;
- temp1 <<= 8;
- temp1 |= *(p + 1);
- if (regnum == PC_REGNUM)
- print_address (addr + temp1 + 3, stream);
- else
- fprintf_unfiltered (stream, "%d(%s)", temp1, REGISTER_NAME (regnum));
- p += 2;
- break;
-
- case 15: /* Register + Long Displacement Deferred Mode */
- fputc_unfiltered ('*', stream);
- case 14: /* Register + Long Displacement Mode */
- temp1 = *p;
- temp1 <<= 8;
- temp1 |= *(p + 1);
- temp1 <<= 8;
- temp1 |= *(p + 2);
- temp1 <<= 8;
- temp1 |= *(p + 3);
- if (regnum == PC_REGNUM)
- print_address (addr + temp1 + 5, stream);
- else
- fprintf_unfiltered (stream, "%d(%s)", temp1, REGISTER_NAME (regnum));
- p += 4;
- }
-
- return (unsigned char *) p;
-}
+/* OBSOLETE /* Print instructions for Tahoe target machines, for GDB. */
+/* OBSOLETE Copyright 1986, 1989, 1991, 1992 Free Software Foundation, Inc. */
+/* OBSOLETE Contributed by the State University of New York at Buffalo, by the */
+/* OBSOLETE Distributed Computer Systems Lab, Department of Computer Science, 1991. */
+/* OBSOLETE */
+/* OBSOLETE This file is part of GDB. */
+/* OBSOLETE */
+/* OBSOLETE This program is free software; you can redistribute it and/or modify */
+/* OBSOLETE it under the terms of the GNU General Public License as published by */
+/* OBSOLETE the Free Software Foundation; either version 2 of the License, or */
+/* OBSOLETE (at your option) any later version. */
+/* OBSOLETE */
+/* OBSOLETE This program is distributed in the hope that it will be useful, */
+/* OBSOLETE but WITHOUT ANY WARRANTY; without even the implied warranty of */
+/* OBSOLETE MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the */
+/* OBSOLETE GNU General Public License for more details. */
+/* OBSOLETE */
+/* OBSOLETE You should have received a copy of the GNU General Public License */
+/* OBSOLETE along with this program; if not, write to the Free Software */
+/* OBSOLETE Foundation, Inc., 59 Temple Place - Suite 330, */
+/* OBSOLETE Boston, MA 02111-1307, USA. *x/ */
+/* OBSOLETE */
+/* OBSOLETE #include "defs.h" */
+/* OBSOLETE #include "symtab.h" */
+/* OBSOLETE #include "opcode/tahoe.h" */
+/* OBSOLETE */
+/* OBSOLETE /* Tahoe instructions are never longer than this. *x/ */
+/* OBSOLETE #define MAXLEN 62 */
+/* OBSOLETE */
+/* OBSOLETE /* Number of elements in the opcode table. *x/ */
+/* OBSOLETE #define NOPCODES (sizeof votstrs / sizeof votstrs[0]) */
+/* OBSOLETE */
+/* OBSOLETE static unsigned char *print_insn_arg (); */
+/* OBSOLETE */
+/* OBSOLETE /* Advance PC across any function entry prologue instructions */
+/* OBSOLETE to reach some "real" code. *x/ */
+/* OBSOLETE */
+/* OBSOLETE CORE_ADDR */
+/* OBSOLETE tahoe_skip_prologue (pc) */
+/* OBSOLETE CORE_ADDR pc; */
+/* OBSOLETE { */
+/* OBSOLETE register int op = (unsigned char) read_memory_integer (pc, 1); */
+/* OBSOLETE if (op == 0x11) */
+/* OBSOLETE pc += 2; /* skip brb *x/ */
+/* OBSOLETE if (op == 0x13) */
+/* OBSOLETE pc += 3; /* skip brw *x/ */
+/* OBSOLETE if (op == 0x2c */
+/* OBSOLETE && ((unsigned char) read_memory_integer (pc + 2, 1)) == 0x5e) */
+/* OBSOLETE pc += 3; /* skip subl2 *x/ */
+/* OBSOLETE if (op == 0xe9 */
+/* OBSOLETE && ((unsigned char) read_memory_integer (pc + 1, 1)) == 0xae */
+/* OBSOLETE && ((unsigned char) read_memory_integer (pc + 3, 1)) == 0x5e) */
+/* OBSOLETE pc += 4; /* skip movab *x/ */
+/* OBSOLETE if (op == 0xe9 */
+/* OBSOLETE && ((unsigned char) read_memory_integer (pc + 1, 1)) == 0xce */
+/* OBSOLETE && ((unsigned char) read_memory_integer (pc + 4, 1)) == 0x5e) */
+/* OBSOLETE pc += 5; /* skip movab *x/ */
+/* OBSOLETE if (op == 0xe9 */
+/* OBSOLETE && ((unsigned char) read_memory_integer (pc + 1, 1)) == 0xee */
+/* OBSOLETE && ((unsigned char) read_memory_integer (pc + 6, 1)) == 0x5e) */
+/* OBSOLETE pc += 7; /* skip movab *x/ */
+/* OBSOLETE return pc; */
+/* OBSOLETE } */
+/* OBSOLETE */
+/* OBSOLETE /* Return number of args passed to a frame. */
+/* OBSOLETE Can return -1, meaning no way to tell. *x/ */
+/* OBSOLETE */
+/* OBSOLETE int */
+/* OBSOLETE tahoe_frame_num_args (fi) */
+/* OBSOLETE struct frame_info *fi; */
+/* OBSOLETE { */
+/* OBSOLETE return (((0xffff & read_memory_integer (((fi)->frame - 4), 4)) - 4) >> 2); */
+/* OBSOLETE } */
+/* OBSOLETE */
+/* OBSOLETE /* Print the Tahoe instruction at address MEMADDR in debugged memory, */
+/* OBSOLETE on STREAM. Returns length of the instruction, in bytes. *x/ */
+/* OBSOLETE */
+/* OBSOLETE int */
+/* OBSOLETE tahoe_print_insn (memaddr, stream) */
+/* OBSOLETE CORE_ADDR memaddr; */
+/* OBSOLETE GDB_FILE *stream; */
+/* OBSOLETE { */
+/* OBSOLETE unsigned char buffer[MAXLEN]; */
+/* OBSOLETE register int i; */
+/* OBSOLETE register unsigned char *p; */
+/* OBSOLETE register char *d; */
+/* OBSOLETE */
+/* OBSOLETE read_memory (memaddr, buffer, MAXLEN); */
+/* OBSOLETE */
+/* OBSOLETE for (i = 0; i < NOPCODES; i++) */
+/* OBSOLETE if (votstrs[i].detail.code == buffer[0] */
+/* OBSOLETE || votstrs[i].detail.code == *(unsigned short *) buffer) */
+/* OBSOLETE break; */
+/* OBSOLETE */
+/* OBSOLETE /* Handle undefined instructions. *x/ */
+/* OBSOLETE if (i == NOPCODES) */
+/* OBSOLETE { */
+/* OBSOLETE fprintf_unfiltered (stream, "0%o", buffer[0]); */
+/* OBSOLETE return 1; */
+/* OBSOLETE } */
+/* OBSOLETE */
+/* OBSOLETE fprintf_unfiltered (stream, "%s", votstrs[i].name); */
+/* OBSOLETE */
+/* OBSOLETE /* Point at first byte of argument data, */
+/* OBSOLETE and at descriptor for first argument. *x/ */
+/* OBSOLETE p = buffer + 1 + (votstrs[i].detail.code >= 0x100); */
+/* OBSOLETE d = votstrs[i].detail.args; */
+/* OBSOLETE */
+/* OBSOLETE if (*d) */
+/* OBSOLETE fputc_unfiltered ('\t', stream); */
+/* OBSOLETE */
+/* OBSOLETE while (*d) */
+/* OBSOLETE { */
+/* OBSOLETE p = print_insn_arg (d, p, memaddr + (p - buffer), stream); */
+/* OBSOLETE d += 2; */
+/* OBSOLETE if (*d) */
+/* OBSOLETE fprintf_unfiltered (stream, ","); */
+/* OBSOLETE } */
+/* OBSOLETE return p - buffer; */
+/* OBSOLETE } */
+/* OBSOLETE /*******************************************************************x/ */
+/* OBSOLETE static unsigned char * */
+/* OBSOLETE print_insn_arg (d, p, addr, stream) */
+/* OBSOLETE char *d; */
+/* OBSOLETE register char *p; */
+/* OBSOLETE CORE_ADDR addr; */
+/* OBSOLETE GDB_FILE *stream; */
+/* OBSOLETE { */
+/* OBSOLETE int temp1 = 0; */
+/* OBSOLETE register int regnum = *p & 0xf; */
+/* OBSOLETE float floatlitbuf; */
+/* OBSOLETE */
+/* OBSOLETE if (*d == 'b') */
+/* OBSOLETE { */
+/* OBSOLETE if (d[1] == 'b') */
+/* OBSOLETE fprintf_unfiltered (stream, "0x%x", addr + *p++ + 1); */
+/* OBSOLETE else */
+/* OBSOLETE { */
+/* OBSOLETE */
+/* OBSOLETE temp1 = *p; */
+/* OBSOLETE temp1 <<= 8; */
+/* OBSOLETE temp1 |= *(p + 1); */
+/* OBSOLETE fprintf_unfiltered (stream, "0x%x", addr + temp1 + 2); */
+/* OBSOLETE p += 2; */
+/* OBSOLETE } */
+/* OBSOLETE } */
+/* OBSOLETE else */
+/* OBSOLETE switch ((*p++ >> 4) & 0xf) */
+/* OBSOLETE { */
+/* OBSOLETE case 0: */
+/* OBSOLETE case 1: */
+/* OBSOLETE case 2: */
+/* OBSOLETE case 3: /* Literal (short immediate byte) mode *x/ */
+/* OBSOLETE if (d[1] == 'd' || d[1] == 'f' || d[1] == 'g' || d[1] == 'h') */
+/* OBSOLETE { */
+/* OBSOLETE *(int *) &floatlitbuf = 0x4000 + ((p[-1] & 0x3f) << 4); */
+/* OBSOLETE fprintf_unfiltered (stream, "$%f", floatlitbuf); */
+/* OBSOLETE } */
+/* OBSOLETE else */
+/* OBSOLETE fprintf_unfiltered (stream, "$%d", p[-1] & 0x3f); */
+/* OBSOLETE break; */
+/* OBSOLETE */
+/* OBSOLETE case 4: /* Indexed *x/ */
+/* OBSOLETE p = (char *) print_insn_arg (d, p, addr + 1, stream); */
+/* OBSOLETE fprintf_unfiltered (stream, "[%s]", REGISTER_NAME (regnum)); */
+/* OBSOLETE break; */
+/* OBSOLETE */
+/* OBSOLETE case 5: /* Register *x/ */
+/* OBSOLETE fprintf_unfiltered (stream, REGISTER_NAME (regnum)); */
+/* OBSOLETE break; */
+/* OBSOLETE */
+/* OBSOLETE case 7: /* Autodecrement *x/ */
+/* OBSOLETE fputc_unfiltered ('-', stream); */
+/* OBSOLETE case 6: /* Register deferred *x/ */
+/* OBSOLETE fprintf_unfiltered (stream, "(%s)", REGISTER_NAME (regnum)); */
+/* OBSOLETE break; */
+/* OBSOLETE */
+/* OBSOLETE case 9: /* Absolute Address & Autoincrement deferred *x/ */
+/* OBSOLETE fputc_unfiltered ('*', stream); */
+/* OBSOLETE if (regnum == PC_REGNUM) */
+/* OBSOLETE { */
+/* OBSOLETE temp1 = *p; */
+/* OBSOLETE temp1 <<= 8; */
+/* OBSOLETE temp1 |= *(p + 1); */
+/* OBSOLETE */
+/* OBSOLETE fputc_unfiltered ('$', stream); */
+/* OBSOLETE print_address (temp1, stream); */
+/* OBSOLETE p += 4; */
+/* OBSOLETE break; */
+/* OBSOLETE } */
+/* OBSOLETE case 8: /*Immediate & Autoincrement SP *x/ */
+/* OBSOLETE if (regnum == 8) /*88 is Immediate Byte Mode *x/ */
+/* OBSOLETE fprintf_unfiltered (stream, "$%d", *p++); */
+/* OBSOLETE */
+/* OBSOLETE else if (regnum == 9) /*89 is Immediate Word Mode *x/ */
+/* OBSOLETE { */
+/* OBSOLETE temp1 = *p; */
+/* OBSOLETE temp1 <<= 8; */
+/* OBSOLETE temp1 |= *(p + 1); */
+/* OBSOLETE fprintf_unfiltered (stream, "$%d", temp1); */
+/* OBSOLETE p += 2; */
+/* OBSOLETE } */
+/* OBSOLETE */
+/* OBSOLETE else if (regnum == PC_REGNUM) /*8F is Immediate Long Mode *x/ */
+/* OBSOLETE { */
+/* OBSOLETE temp1 = *p; */
+/* OBSOLETE temp1 <<= 8; */
+/* OBSOLETE temp1 |= *(p + 1); */
+/* OBSOLETE temp1 <<= 8; */
+/* OBSOLETE temp1 |= *(p + 2); */
+/* OBSOLETE temp1 <<= 8; */
+/* OBSOLETE temp1 |= *(p + 3); */
+/* OBSOLETE fprintf_unfiltered (stream, "$%d", temp1); */
+/* OBSOLETE p += 4; */
+/* OBSOLETE } */
+/* OBSOLETE */
+/* OBSOLETE else /*8E is Autoincrement SP Mode *x/ */
+/* OBSOLETE fprintf_unfiltered (stream, "(%s)+", REGISTER_NAME (regnum)); */
+/* OBSOLETE break; */
+/* OBSOLETE */
+/* OBSOLETE case 11: /* Register + Byte Displacement Deferred Mode *x/ */
+/* OBSOLETE fputc_unfiltered ('*', stream); */
+/* OBSOLETE case 10: /* Register + Byte Displacement Mode *x/ */
+/* OBSOLETE if (regnum == PC_REGNUM) */
+/* OBSOLETE print_address (addr + *p + 2, stream); */
+/* OBSOLETE else */
+/* OBSOLETE fprintf_unfiltered (stream, "%d(%s)", *p, REGISTER_NAME (regnum)); */
+/* OBSOLETE p += 1; */
+/* OBSOLETE break; */
+/* OBSOLETE */
+/* OBSOLETE case 13: /* Register + Word Displacement Deferred Mode *x/ */
+/* OBSOLETE fputc_unfiltered ('*', stream); */
+/* OBSOLETE case 12: /* Register + Word Displacement Mode *x/ */
+/* OBSOLETE temp1 = *p; */
+/* OBSOLETE temp1 <<= 8; */
+/* OBSOLETE temp1 |= *(p + 1); */
+/* OBSOLETE if (regnum == PC_REGNUM) */
+/* OBSOLETE print_address (addr + temp1 + 3, stream); */
+/* OBSOLETE else */
+/* OBSOLETE fprintf_unfiltered (stream, "%d(%s)", temp1, REGISTER_NAME (regnum)); */
+/* OBSOLETE p += 2; */
+/* OBSOLETE break; */
+/* OBSOLETE */
+/* OBSOLETE case 15: /* Register + Long Displacement Deferred Mode *x/ */
+/* OBSOLETE fputc_unfiltered ('*', stream); */
+/* OBSOLETE case 14: /* Register + Long Displacement Mode *x/ */
+/* OBSOLETE temp1 = *p; */
+/* OBSOLETE temp1 <<= 8; */
+/* OBSOLETE temp1 |= *(p + 1); */
+/* OBSOLETE temp1 <<= 8; */
+/* OBSOLETE temp1 |= *(p + 2); */
+/* OBSOLETE temp1 <<= 8; */
+/* OBSOLETE temp1 |= *(p + 3); */
+/* OBSOLETE if (regnum == PC_REGNUM) */
+/* OBSOLETE print_address (addr + temp1 + 5, stream); */
+/* OBSOLETE else */
+/* OBSOLETE fprintf_unfiltered (stream, "%d(%s)", temp1, REGISTER_NAME (regnum)); */
+/* OBSOLETE p += 4; */
+/* OBSOLETE } */
+/* OBSOLETE */
+/* OBSOLETE return (unsigned char *) p; */
+/* OBSOLETE } */
static char buf[30];
if (STREQ (current_target.to_shortname, "remote"))
- sprintf (buf, "thread %d\0", pid);
+ sprintf (buf, "thread %d", pid);
else
- sprintf (buf, "process %d\0", pid);
+ sprintf (buf, "process %d", pid);
return buf;
}
fprintf_unfiltered (gdb_stdlog, "target_fetch_registers (%s)",
regno != -1 ? REGISTER_NAME (regno) : "-1");
if (regno != -1)
- fprintf_unfiltered (gdb_stdlog, " = 0x%x %d",
+ fprintf_unfiltered (gdb_stdlog, " = 0x%lx %ld",
(unsigned long) read_register (regno),
- read_register (regno));
+ (unsigned long) read_register (regno));
fprintf_unfiltered (gdb_stdlog, "\n");
}
debug_target.to_store_registers (regno);
if (regno >= 0 && regno < NUM_REGS)
- fprintf_unfiltered (gdb_stdlog, "target_store_registers (%s) = 0x%x %d\n",
+ fprintf_unfiltered (gdb_stdlog, "target_store_registers (%s) = 0x%lx %ld\n",
REGISTER_NAME (regno),
(unsigned long) read_register (regno),
(unsigned long) read_register (regno));
retval = debug_target.to_insert_breakpoint (addr, save);
fprintf_unfiltered (gdb_stdlog,
- "target_insert_breakpoint (0x%x, xxx) = %d\n",
- (unsigned long) addr, retval);
+ "target_insert_breakpoint (0x%lx, xxx) = %ld\n",
+ (unsigned long) addr,
+ (unsigned long) retval);
return retval;
}
retval = debug_target.to_remove_breakpoint (addr, save);
fprintf_unfiltered (gdb_stdlog,
- "target_remove_breakpoint (0x%x, xxx) = %d\n",
- (unsigned long) addr, retval);
+ "target_remove_breakpoint (0x%lx, xxx) = %ld\n",
+ (unsigned long) addr,
+ (unsigned long) retval);
return retval;
}
+1999-08-25 Stan Shebs <shebs@andros.cygnus.com>
+
+ * gdb.base/ending-run.exp: Add Solaris case for what happens when
+ stepping out of main.
+
+ * gdb.c++/derivation.exp: XFAIL inf fn calls for all configs, if
+ G++ used.
+
+ * gdb.c++/local.exp: Expect ptype NestedInnerLocal to succeed
+ always, expect ptype InnerLocal::NestedInnerLocal to fail always.
+
+ * gdb.c++/ovldbreak.exp: Update match string in test that
+ includes a warning of multiple breakpoints.
+
+1999-08-24 Stan Shebs <shebs@andros.cygnus.com>
+
+ * gdb.base/display.exp: Improve precision of step-after-finish
+ added yesterday.
+
+ * gdb.base/signals.exp: Add extra wildcard to "handle all print"
+ test.
+
+ * gdb.c++/classes.exp: XFAIL HP-compiler-only tests for all
+ configs when using G++, not just hppa*.
+
+1999-08-24 Elena Zannoni <ezannoni@kwikemart.cygnus.com>
+
+ * gdb.base/async.c: New file.
+ * gdb.base/async.exp: New file.
+
+Tue Aug 24 03:24:53 1999 Jeffrey A Law (law@cygnus.com)
+
+ * gdb.base/break.exp: Tweak PA specific tests to properly handle
+ PA64.
+
Mon Aug 23 10:25:20 1999 Jeffrey A Law (law@cygnus.com)
+ * gdb.base/display.exp: "finish" can leave us mid-line on many
+ targets, deal with it. Add a small constant to main, instead of
+ 1000 since main+1000 may not be a valid address in the target.
+
* gdb.base/dollar.exp: Do not run for PA processors in wide mode
on hpux11.
--- /dev/null
+
+
+#ifdef PROTOTYPES
+int
+foo (void)
+#else
+int
+foo ()
+#endif
+{
+ int x, y;
+
+ x = 5;
+ y = 3;
+
+ return x + y;
+}
+
+#ifdef PROTOTYPES
+int
+main (void)
+#else
+int
+main ()
+#endif
+{
+ int y, z;
+
+ y = 2;
+ z = 9;
+ y = foo ();
+ z = y;
+ y = y + 2;
+ y = baz ();
+ return 0;
+}
+
+
+#ifdef PROTOTYPES
+int
+baz (void)
+#else
+int
+baz ()
+#endif
+{
+ return 5;
+}
--- /dev/null
+# Copyright (C) 1999
+# Free Software Foundation, Inc.
+
+# This program is free software; you can redistribute it and/or modify
+# it under the terms of the GNU General Public License as published by
+# the Free Software Foundation; either version 2 of the License, or
+# (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
+
+# Please email any bugs, comments, and/or additions to this file to:
+# bug-gdb@prep.ai.mit.edu
+
+
+if $tracelevel then {
+ strace $tracelevel
+}
+
+#
+# test running programs
+#
+set prms_id 0
+set bug_id 0
+
+set testfile "async"
+set srcfile ${testfile}.c
+set binfile ${objdir}/${subdir}/${testfile}
+
+if { [gdb_compile "${srcdir}/${subdir}/${srcfile}" "${binfile}" executable {debug additional_flags=-w}] != "" } {
+ gdb_suppress_entire_file "Testcase compile failed, so all tests in this file will automatically fail."
+}
+
+if [get_compiler_info ${binfile}] {
+ return -1
+}
+
+########################################
+##
+## Don't do any of these tests until we reach consensus on this file.
+##
+return 0
+########################################
+
+set board [target_info name]
+set current_target [target_info gdb_protocol]
+if { $current_target == "remote" } {
+ unset_board_info "gdb_protocol"
+ set_board_info "gdb_protocol" "async"
+ } else {
+ return 0
+ }
+
+gdb_exit
+gdb_start
+gdb_reinitialize_dir $srcdir/$subdir
+gdb_load ${binfile}
+if [target_info exists gdb_stub] {
+ gdb_step_for_stub;
+}
+
+#
+# set it up at a breakpoint so we can play with it
+#
+if ![runto_main] then {
+ perror "couldn't run to breakpoint"
+ continue
+}
+
+gdb_test "break baz" "" ""
+
+#
+# Make sure we get a 'completed' message when the target is done.
+#
+gdb_test "set display-exec-done on" "" ""
+
+
+send_gdb "next&\n"
+gdb_expect {
+ -re "^next&\r\n$gdb_prompt.*z = 9.*completed\.\r\n" { pass "next &" }
+ -re "$gdb_prompt.*completed\.$" { fail "next &" }
+ timeout { fail "(timeout) next &" }
+}
+
+send_gdb "step&\n"
+gdb_expect {
+ -re "^step&\r\n$gdb_prompt.*y = foo \\(\\).*completed\.\r\n" { pass "step &" }
+ -re "$gdb_prompt.*completed\.$" { fail "step &" }
+ timeout { fail "(timeout) step &" }
+}
+
+send_gdb "step&\n"
+gdb_expect {
+ -re "^step&\r\n$gdb_prompt foo \\(\\) at .*async.c.*x = 5.*completed\.\r\n" \
+ { pass "step &" }
+ -re "$gdb_prompt.*completed\.$" { fail "step &" }
+ timeout { fail "(timeout) step &" }
+}
+
+send_gdb "stepi&\n"
+gdb_expect {
+ -re "^stepi&\r\n$gdb_prompt.*$hex.*x = 5.*completed\.\r\n" { pass "stepi &" }
+ -re "$gdb_prompt.*completed\.$" { fail "stepi &" }
+ timeout { fail "(timeout) stepi &" }
+}
+
+send_gdb "nexti&\n"
+gdb_expect {
+ -re "^nexti&\r\n$gdb_prompt.*y = 3.*completed\.\r\n" { pass "nexti &" }
+ -re "$gdb_prompt.*completed\.$" { fail "nexti &" }
+ timeout { fail "(timeout) nexti &" }
+}
+
+send_gdb "finish&\n"
+gdb_expect {
+ -re "^finish&\r\nRun till exit from #0 foo \\(\\) at.*async.c.*\r\n$gdb_prompt.*$hex in main \\(\\) at.*async.c.*y = foo \\(\\).*Value returned is.*= 8.*completed\.\r\n" \
+ { pass "finish &" }
+ -re "$gdb_prompt.*completed\.$" { fail "finish &" }
+ timeout { fail "(timeout) finish &" }
+}
+
+send_gdb "jump 33&\n"
+gdb_expect {
+ -re "^jump 33&.*Continuing at $hex.*$gdb_prompt.*Breakpoint 2, baz \\(\\) at.*async.c.*return 5.*completed\.\r\n" \
+ { pass "jump &" }
+ -re ".*$gdb_prompt.*completed\.$" { fail "jump &" }
+ timeout { fail "(timeout) jump &" }
+}
+
+send_gdb "until 35&\n"
+gdb_expect {
+ -re "^until 35&.*$gdb_prompt.*$hex in main \\(\\) at.*async.c.*y = baz \\(\\).*completed\.\r\n" \
+ { pass "until &" }
+ -re "$gdb_prompt.*completed\.$" { fail "until &" }
+ timeout { fail "(timeout) until &" }
+}
+
+gdb_test "set display-exec-done off" "" ""
+
+unset_board_info "gdb_protocol"
+set_board_info "gdb_protocol" "remote"
+
+
+
+
+
+
if [istarget "hppa*-*-hpux*"] then {
send_gdb "bt\n"
gdb_expect {
- -re "#0\[ \t\]*marker2.*:4\[49\]\r\n#1.*_sr4export.*$gdb_prompt $"\
+ -re "#0\[ \t\]*0x\[0-9\]* in marker2.*:4\[49\]\r\n#1.*_sr4export.*$gdb_prompt $"\
{pass "backtrace while in called function"}
- -re "#0\[ \t\]*marker2.*:4\[49\]\r\n#1.*function called from gdb.*$gdb_prompt $"\
+ -re "#0\[ \t\]*0x\[0-9\]* in marker2.*:4\[49\]\r\n#1.*function called from gdb.*$gdb_prompt $"\
+
{pass "backtrace while in called function"}
-re "$gdb_prompt $"\
{fail "backtrace while in called function"}
{pass "finish from called function"}
-re "Run till exit from .*marker2.* at .*4\[49\]\r\n.*function called from gdb.*$gdb_prompt $"\
{pass "finish from called function"}
+ -re "Run till exit from .*marker2.* at .*4\[49\]\r\n.*Value returned.*$gdb_prompt $"\
+ {pass "finish from called function"}
-re "$gdb_prompt $"\
{fail "finish from called function"}
timeout {fail "(timeout) finish from called function"}
# Now the printf tests
#
-gdb_test "fin" ".*Run till exit.*Value returned is.*= 10.*" "finish"
+# The "finish" command may leave us mid-line in the caller on some
+# targets, including but not limited to the m68k, i386 & PA. So we
+# have to arrange to step until we hit the line with the call to
+# "do_vars".
+send_gdb "finish\n"
+gdb_expect {
+ -re ".*do_loops();.*$gdb_prompt $" {
+ send_gdb "step\n"
+ exp_continue
+ }
+ -re ".*do_vars.*$gdb_prompt $" {
+ pass "finish"
+ }
+ default { fail "finish" ; gdb_suppress_tests; }
+}
+
gdb_test "s" ".*do_vars.*.*27.*"
gdb_test "tb 37" ".*Breakpoint 5 a.*"
gdb_test "c" ".*do_vars.*37.*37.*"
gdb_test "p/s sum" ".*Format letter.*is meaningless.*" " no s"
gdb_test "p/i sum" ".*Format letter.*is meaningless.*.*" "no i"
gdb_test "p/a &sum" ".*= $hex.*<sum>.*"
-gdb_test "p/a main+1000" ".*= $hex.*<.*>.*"
+# If the constant below is larger than the length of main, then
+# this test will (incorrectly) fail. So use a small number.
+gdb_test "p/a main+4" ".*= $hex.*<.*>.*"
gdb_test "p/a \$pc" ".*= $hex.*<do_vars+.*>.*"
gdb_test "p/a &&j" ".*A parse error.*"
# When we are in "wide" mode we do not necessary have $$dyncall as a symbol
# name, which makes all these tests useless
-if ![ istarget "hppa*w-*-hpux11*" ] then {
+if [ istarget "hppa*w-*-hpux11*" ] then {
return
}
-re ".*in.*start.*$gdb_prompt $" {
pass "step out of main"
}
+ -re ".*in .nope ().*$gdb_prompt $" {
+ # This is what happens on Solaris currently -sts 1999-08-25
+ pass "step out of main on Solaris"
+ }
-re ".*in.*\\\$START\\\$.*from.*dld.sl.*$gdb_prompt $" {
pass "step out of main"
}
|| [istarget "*-*-mach*"] ) } {
gdb_test "handle all print" "Signal\[ \]+Stop\[ \]+Print\[ \]+Pass to program\[ \]+Description\r\nSIGHUP\[ \]+Yes\[ \]+Yes\[ \]+Yes\[ \]+Hangup.*SIG63\[ \]+Yes\[ \]+Yes\[ \]+Yes\[ \]+Real-time event 63.*EXC_BREAKPOINT\[ \]+Yes\[ \]+Yes\[ \]+Yes\[ \]+Breakpoint"
} else {
- gdb_test "handle all print" "Signal\[ \]+Stop\[ \]+Print\[ \]+Pass to program\[ \]+Description\r\nSIGHUP\[ \]+Yes\[ \]+Yes\[ \]+Yes\[ \]+Hangup.*SIG63\[ \]+Yes\[ \]+Yes\[ \]+Yes\[ \]+Real-time event 63"
+ gdb_test "handle all print" "Signal\[ \]+Stop\[ \]+Print\[ \]+Pass to program\[ \]+Description\r\nSIGHUP\[ \]+Yes\[ \]+Yes\[ \]+Yes\[ \]+Hangup.*SIG63\[ \]+Yes\[ \]+Yes\[ \]+Yes\[ \]+Real-time event 63.*"
}
set timeout $oldtimeout
verbose "Timeout restored to $timeout seconds" 2
# ptype on the object
# g++ is putting out the wrong debug info. This works with aCC
-if {!$hp_aCC_compiler} {setup_xfail "hppa*-*-*"}
+if {!$hp_aCC_compiler} {setup_xfail "*-*-*"}
send_gdb "ptype obj_with_enum\n"
gdb_expect {
-re "type = class ClassWithEnum \\{\r\n\[ \t\]*public:\r\n\[ \t\]*(enum |)ClassWithEnum::PrivEnum priv_enum;\r\n\[ \t\]*int x;\r\n\\}\r\n$gdb_prompt $" { pass "ptype obj_with_enum" }
}
# g++ is putting out the wrong debug info. This works with aCC
-if {!$hp_aCC_compiler} {setup_xfail "hppa*-*-*"}
+if {!$hp_aCC_compiler} {setup_xfail "*-*-*"}
send_gdb "print (ClassWithEnum::PrivEnum) 42\n"
gdb_expect {
-re "\\$\[0-9\]* = yellow.*$gdb_prompt $" { pass "print (ClassWithEnum::PrivEnum) 42" }
timeout { fail "(timeout) print value of g_instance.c" }
}
-if { $gcc_compiled } { setup_xfail "hppa*-hp-hpux*" }
+# The following cases always fail with g++ output, and should be fixed
+# someday. -sts 1999-08-25
+
+if { $gcc_compiled } { setup_xfail "*-*-*" }
send_gdb "print g_instance.afoo()\n"
gdb_expect {
-re ".\[0-9\]* = 1.*$gdb_prompt $" {
timeout { fail "(timeout) print value of g_instance.afoo()" }
}
-if { $gcc_compiled } { setup_xfail "hppa*-hp-hpux*" }
+if { $gcc_compiled } { setup_xfail "*-*-*" }
send_gdb "print g_instance.bfoo()\n"
gdb_expect {
-re ".\[0-9\]* = 2.*$gdb_prompt $" {
timeout { fail "(timeout) print value of g_instance.bfoo()" }
}
-if { $gcc_compiled } { setup_xfail "hppa*-hp-hpux*" }
+if { $gcc_compiled } { setup_xfail "*-*-*" }
send_gdb "print g_instance.cfoo()\n"
gdb_expect {
-re ".\[0-9\]* = 3.*$gdb_prompt $" {
timeout { fail "(timeout) ptype InnerLocal" }
}
-
-if {$gcc_compiled} then {
-setup_xfail "*-*-*"
-}
-
send_gdb "ptype NestedInnerLocal\n"
gdb_expect {
-re "type = class InnerLocal::NestedInnerLocal \{\r\n\[\t \]*public:\r\n\[\t \]*int nil;\r\n\r\n\[\t \]*.int nil_foo\\(int\\);\r\n\[\t \]*\}\[\t \]*\\(Local at.*local\\.cc:44\\).*$gdb_prompt $" { pass "ptype NestedInnerLocal" }
# gdb incorrectly interprets the NestedInnerLocal in
# InnerLocal::NestedInnerLocal as field name instead of a type name;
# See CLLbs14784.
-setup_xfail hppa*-*-* CLLbs14784
+setup_xfail *-*-* CLLbs14784
send_gdb "ptype InnerLocal::NestedInnerLocal\n"
gdb_expect {
-re "type = class InnerLocal::NestedInnerLocal \{\r\n\[\t \]*public:\r\n\[\t \]*int nil;\r\n\r\n\[\t \]*.int nil_foo\\(int\\);\r\n\[\t \]*\}\[\t \]*\\(Local at.*local\\.cc:44\\).*$gdb_prompt $" { pass "ptype InnerLocal::NestedInnerLocal" }
-re "\\\[0\\\] cancel\r\n\\\[1\\\] all\r\n\\\[2\\\] foo::overload1arg\\(double\\) at.*$srcfile:121\r\n\\\[3\\\] foo::overload1arg\\(float\\) at.*$srcfile:120\r\n\\\[4\\\] foo::overload1arg\\(unsigned long\\) at.*$srcfile:119\r\n\\\[5\\\] foo::overload1arg\\(long\\) at.*$srcfile:118\r\n\\\[6\\\] foo::overload1arg\\(unsigned int\\) at.*$srcfile:117\r\n\\\[7\\\] foo::overload1arg\\(int\\) at.*$srcfile:116\r\n\\\[8\\\] foo::overload1arg\\(unsigned short\\) at.*$srcfile:115\r\n\\\[9\\\] foo::overload1arg\\(short\\) at.*$srcfile:114\r\n\\\[10\\\] foo::overload1arg\\(unsigned char\\) at.*$srcfile:113\r\n\\\[11\\\] foo::overload1arg\\(signed char\\) at.*$srcfile:112\r\n\\\[12\\\] foo::overload1arg\\(char\\) at.*$srcfile:111\r\n\\\[13\\\] foo::overload1arg\\(void\\) at.*$srcfile:110\r\n> $" {
send_gdb "1\n"
gdb_expect {
- -re "Breakpoint $decimal at $hex: file.*$srcfile, line 121.\r\nBreakpoint $decimal at $hex: file.*$srcfile, line 120.\r\nBreakpoint $decimal at $hex: file.*$srcfile, line 119.\r\nBreakpoint $decimal at $hex: file.*$srcfile, line 118.\r\nBreakpoint $decimal at $hex: file.*$srcfile, line 117.\r\nBreakpoint $decimal at $hex: file.*$srcfile, line 116.\r\nBreakpoint $decimal at $hex: file.*$srcfile, line 115.\r\nBreakpoint $decimal at $hex: file.*$srcfile, line 114.\r\nBreakpoint $decimal at $hex: file.*$srcfile, line 113.\r\nBreakpoint $decimal at $hex: file.*$srcfile, line 112.\r\nBreakpoint $decimal at $hex: file.*$srcfile, line 111.\r\nBreakpoint $decimal at $hex: file.*$srcfile, line 110.\r\nMultiple breakpoints were set.\r\nUse the .delete. command to delete unwanted breakpoints.\r\n$gdb_prompt $" {
+ -re "Breakpoint $decimal at $hex: file.*$srcfile, line 121.\r\nBreakpoint $decimal at $hex: file.*$srcfile, line 120.\r\nBreakpoint $decimal at $hex: file.*$srcfile, line 119.\r\nBreakpoint $decimal at $hex: file.*$srcfile, line 118.\r\nBreakpoint $decimal at $hex: file.*$srcfile, line 117.\r\nBreakpoint $decimal at $hex: file.*$srcfile, line 116.\r\nBreakpoint $decimal at $hex: file.*$srcfile, line 115.\r\nBreakpoint $decimal at $hex: file.*$srcfile, line 114.\r\nBreakpoint $decimal at $hex: file.*$srcfile, line 113.\r\nBreakpoint $decimal at $hex: file.*$srcfile, line 112.\r\nBreakpoint $decimal at $hex: file.*$srcfile, line 111.\r\nBreakpoint $decimal at $hex: file.*$srcfile, line 110.\r\nwarning: Multiple breakpoints were set.\r\nwarning: Use the .delete. command to delete unwanted breakpoints.\r\n$gdb_prompt $" {
pass "set bp on all overload1arg()" }
-re ".*$gdb_prompt $" {
fail "set bp on all overload1arg() wrong bp reply" }
#undef savestring
#include <sys/types.h>
-#ifdef HAVE_UNISTD_H
-#include <unistd.h>
-#endif
#include "event-loop.h"
#include "gdb_string.h"
static void source_cleanup PARAMS ((FILE *));
-/* If this definition isn't overridden by the header files, assume
- that isatty and fileno exist on this system. */
-#ifndef ISATTY
-#define ISATTY(FP) (isatty (fileno (FP)))
+/* Default command line prompt. This is overriden in some configs. */
+
+#ifndef DEFAULT_PROMPT
+#define DEFAULT_PROMPT "(gdb) "
#endif
/* Initialization file name for gdb. This is overridden in some configs. */
we initialize the prompts differently. */
if (!async_p)
{
-#ifdef DEFAULT_PROMPT
gdb_prompt_string = savestring (DEFAULT_PROMPT, strlen (DEFAULT_PROMPT));
-#else
- gdb_prompt_string = savestring ("(gdb) ", 6);
-#endif
}
else
{
whatever the DEFAULT_PROMPT is. */
the_prompts.top = 0;
PREFIX (0) = "";
-#ifdef DEFAULT_PROMPT
PROMPT (0) = savestring (DEFAULT_PROMPT, strlen (DEFAULT_PROMPT));
-#else
- PROMPT (0) = savestring ("(gdb) ", 6);
-#endif
SUFFIX (0) = "";
/* Set things up for annotation_level > 1, if the user ever decides
to use it. */
add_show_from_set (c, &showlist);
c->function.sfunc = set_async_annotation_level;
}
+ if (async_p)
+ {
+ add_show_from_set
+ (add_set_cmd ("exec-done-display", class_support, var_boolean, (char *) &exec_done_display_p,
+ "Set notification of completion for asynchronous execution commands.\n\
+Use \"on\" to enable the notification, and \"off\" to disable it.", &setlist),
+ &showlist);
+ }
}
#include "defs.h"
#include "symtab.h"
#include "frame.h"
-#include "tracepoint.h"
#include "gdbtypes.h"
#include "expression.h"
#include "gdbcmd.h"
#include "target.h"
#include "language.h"
#include "gdb_string.h"
+#include "inferior.h"
+#include "tracepoint.h"
#include "ax.h"
#include "ax-gdb.h"
extern void x_command PARAMS ((char *, int));
extern int addressprint; /* Print machine addresses? */
+/* GDB commands implemented in other modules:
+ */
+
+extern void output_command PARAMS ((char *, int));
+extern void registers_info PARAMS ((char *, int));
+extern void args_info PARAMS ((char *, int));
+extern void locals_info PARAMS ((char *, int));
+
+
/* If this definition isn't overridden by the header files, assume
that isatty and fileno exist on this system. */
#ifndef ISATTY
/* support routines */
static void trace_mention PARAMS ((struct tracepoint *));
-#if __STDC__
struct collection_list;
-#endif
static void add_aexpr PARAMS ((struct collection_list *, struct agent_expr *));
static unsigned char *mem2hex (unsigned char *, unsigned char *, int);
-static void add_register PARAMS ((struct collection_list * collection, unsigned long regno));
+static void add_register PARAMS ((struct collection_list * collection,
+ unsigned int regno));
static void free_actions_list PARAMS ((char **actions_list));
static void free_actions_list_cleanup_wrapper PARAMS ((void *));
}
}
+/* Entry points into remote.c (FIXME: move this interface down to tgt vector)
+ */
+
+extern int putpkt PARAMS ((char *));
+extern void getpkt PARAMS ((char *, int));
+extern void remote_console_output PARAMS ((char *));
+
/* Utility: wait for reply from stub, while accepting "O" packets */
static char *
remote_get_noisy_reply (buf)
*/
enum tracepoint_opcode
{
- enable,
- disable,
- delete
+ enable_op,
+ disable_op,
+ delete_op
};
-/* This function implements enable, disable and delete. */
+/* This function implements enable, disable and delete commands. */
static void
tracepoint_operation (t, from_tty, opcode)
struct tracepoint *t;
switch (opcode)
{
- case enable:
+ case enable_op:
t->enabled = enabled;
if (modify_tracepoint_hook)
modify_tracepoint_hook (t);
break;
- case disable:
+ case disable_op:
t->enabled = disabled;
if (modify_tracepoint_hook)
modify_tracepoint_hook (t);
break;
- case delete:
+ case delete_op:
if (tracepoint_chain == t)
tracepoint_chain = t->next;
/* Make a copy of the name, so we can null-terminate it
to pass to lookup_internalvar(). */
end = *arg + 1;
- while (isalnum (*end) || *end == '_')
+ while (isalnum ((int) *end) || *end == '_')
end++;
copy = (char *) alloca (end - *arg);
strncpy (copy, *arg + 1, (end - *arg - 1));
{
tpnum = strtol (*arg, arg, 0);
if (tpnum == 0) /* possible strtol failure */
- while (**arg && !isspace (**arg))
+ while (**arg && !isspace ((int) **arg))
(*arg)++; /* advance to next white space, if any */
}
ALL_TRACEPOINTS (t)
enum tracepoint_opcode opcode;
{
struct tracepoint *t, *tmp;
- int tpnum;
- char *cp;
if (args == 0 || *args == 0) /* do them all */
ALL_TRACEPOINTS_SAFE (t, tmp)
int from_tty;
{
dont_repeat ();
- map_args_over_tracepoints (args, from_tty, enable);
+ map_args_over_tracepoints (args, from_tty, enable_op);
}
/* The 'disable trace' command enables tracepoints. Not supported by all targets. */
int from_tty;
{
dont_repeat ();
- map_args_over_tracepoints (args, from_tty, disable);
+ map_args_over_tracepoints (args, from_tty, disable_op);
}
/* Remove a tracepoint (or all if no argument) */
if (!query ("Delete all tracepoints? "))
return;
- map_args_over_tracepoints (args, from_tty, delete);
+ map_args_over_tracepoints (args, from_tty, delete_op);
}
/* Set passcount for tracepoint.
int from_tty;
{
struct tracepoint *t1 = (struct tracepoint *) -1, *t2;
- unsigned long count;
+ unsigned int count;
if (args == 0 || *args == 0)
error ("PASS command requires an argument (count + optional TP num)");
count = strtoul (args, &args, 10); /* count comes first, then TP num */
- while (*args && isspace (*args))
+ while (*args && isspace ((int) *args))
args++;
if (*args && strncasecmp (args, "all", 3) == 0)
/* Prototypes for action-parsing utility commands */
static void read_actions PARAMS ((struct tracepoint *));
-static char *parse_and_eval_memrange PARAMS ((char *,
- CORE_ADDR,
- long *,
- bfd_signed_vma *,
- long *));
/* The three functions:
collect_pseudocommand,
int from_tty;
{
struct tracepoint *t;
- char *actions;
char tmpbuf[128];
char *end_msg = "End with a line saying just \"end\".";
{
struct cmd_list_element *c;
struct expression *exp = NULL;
- value_ptr temp, temp2;
struct cleanup *old_chain = NULL;
char *p;
- for (p = *line; isspace (*p);)
+ for (p = *line; isspace ((int) *p);)
p++;
/* symbol lookup etc. */
do
{ /* repeat over a comma-separated list */
QUIT; /* allow user to bail out with ^C */
- while (isspace (*p))
+ while (isspace ((int) *p))
p++;
if (*p == '$') /* look for special pseudo-symbols */
{
- long typecode, size;
- bfd_signed_vma offset;
-
if ((0 == strncasecmp ("reg", p + 1, 3)) ||
(0 == strncasecmp ("arg", p + 1, 3)) ||
(0 == strncasecmp ("loc", p + 1, 3)))
{
if (SYMBOL_CLASS (exp->elts[2].symbol) == LOC_CONST)
{
- warning ("%s is constant (value %d): will not be collected.",
+ warning ("constant %s (value %ld) will not be collected.",
SYMBOL_NAME (exp->elts[2].symbol),
SYMBOL_VALUE (exp->elts[2].symbol));
return BADLINE;
{
char *steparg; /* in case warning is necessary */
- while (isspace (*p))
+ while (isspace ((int) *p))
p++;
steparg = p;
if (*p == '\0' ||
(t->step_count = strtol (p, &p, 0)) == 0)
{
- warning ("bad step-count: command ignored.", *line);
+ warning ("'%s': bad step-count; command ignored.", *line);
return BADLINE;
}
return STEPPING;
struct memrange
{
- int type; /* 0 for absolute memory range, else basereg number */
+ int type; /* 0 for absolute memory range, else basereg number */
bfd_signed_vma start;
bfd_signed_vma end;
};
static void
add_register (collection, regno)
struct collection_list *collection;
- unsigned long regno;
+ unsigned int regno;
{
if (info_verbose)
printf_filtered ("collect register %d\n", regno);
unsigned long len;
{
if (info_verbose)
- printf_filtered ("(%d,0x%x,%d)\n", type, base, len);
+ {
+ printf_filtered ("(%d,", type);
+ printf_vma (base);
+ printf_filtered (",%ld)\n", len);
+ }
+
/* type: 0 == memory, n == basereg */
memranges->list[memranges->next_memrange].type = type;
/* base: addr if memory, offset if reg relative. */
long frame_offset;
{
unsigned long len;
- unsigned long reg;
+ unsigned int reg;
bfd_signed_vma offset;
len = TYPE_LENGTH (check_typedef (SYMBOL_TYPE (sym)));
SYMBOL_NAME (sym), SYMBOL_CLASS (sym));
break;
case LOC_CONST:
- printf_filtered ("%s is constant, value is %d: will not be collected.\n",
+ printf_filtered ("constant %s (value %ld) will not be collected.\n",
SYMBOL_NAME (sym), SYMBOL_VALUE (sym));
break;
case LOC_STATIC:
offset = SYMBOL_VALUE_ADDRESS (sym);
if (info_verbose)
- printf_filtered ("LOC_STATIC %s: collect %d bytes at 0x%08x\n",
- SYMBOL_NAME (sym), len, offset);
+ {
+ char tmp[40];
+
+ sprintf_vma (tmp, offset);
+ printf_filtered ("LOC_STATIC %s: collect %ld bytes at %s.\n",
+ SYMBOL_NAME (sym), len, tmp /* address */);
+ }
add_memrange (collect, -1, offset, len); /* 0 == memory */
break;
case LOC_REGISTER:
offset = frame_offset + SYMBOL_VALUE (sym);
if (info_verbose)
{
- printf_filtered ("LOC_LOCAL %s: Collect %d bytes at offset",
+ printf_filtered ("LOC_LOCAL %s: Collect %ld bytes at offset ",
SYMBOL_NAME (sym), len);
- printf_filtered (" %d from frame ptr reg %d\n", offset, reg);
+ printf_vma (offset);
+ printf_filtered (" from frame ptr reg %d\n", reg);
}
add_memrange (collect, reg, offset, len);
break;
offset = 0;
if (info_verbose)
{
- printf_filtered ("LOC_REGPARM_ADDR %s: Collect %d bytes at offset",
+ printf_filtered ("LOC_REGPARM_ADDR %s: Collect %ld bytes at offset ",
SYMBOL_NAME (sym), len);
- printf_filtered (" %d from reg %d\n", offset, reg);
+ printf_vma (offset);
+ printf_filtered (" from reg %d\n", reg);
}
add_memrange (collect, reg, offset, len);
break;
offset = frame_offset + SYMBOL_VALUE (sym);
if (info_verbose)
{
- printf_filtered ("LOC_LOCAL %s: Collect %d bytes at offset",
+ printf_filtered ("LOC_LOCAL %s: Collect %ld bytes at offset ",
SYMBOL_NAME (sym), len);
- printf_filtered (" %d from frame ptr reg %d\n", offset, reg);
+ printf_vma (offset);
+ printf_filtered (" from frame ptr reg %d\n", reg);
}
add_memrange (collect, reg, offset, len);
break;
offset = SYMBOL_VALUE (sym);
if (info_verbose)
{
- printf_filtered ("LOC_BASEREG %s: collect %d bytes at offset %d from basereg %d\n",
- SYMBOL_NAME (sym), len, offset, reg);
+ printf_filtered ("LOC_BASEREG %s: collect %ld bytes at offset ",
+ SYMBOL_NAME (sym), len);
+ printf_vma (offset);
+ printf_filtered (" from basereg %d\n", reg);
}
add_memrange (collect, reg, offset, len);
break;
sym = BLOCK_SYM (block, i);
switch (SYMBOL_CLASS (sym))
{
+ default:
+ warning ("don't know how to trace local symbol %s",
+ SYMBOL_NAME (sym));
case LOC_LOCAL:
case LOC_STATIC:
case LOC_REGISTER:
char *string;
{
char temp_buf[2048];
+ char tmp2[40];
int count;
int ndx = 0;
char *(*str_list)[];
for (i = 0, count = 0, end = temp_buf; i < list->next_memrange; i++)
{
QUIT; /* allow user to bail out with ^C */
+ sprintf_vma (tmp2, list->list[i].start);
if (info_verbose)
- printf_filtered ("(%d, 0x%x, %d)\n",
- list->list[i].type,
- list->list[i].start,
- list->list[i].end - list->list[i].start);
+ {
+ printf_filtered ("(%d, %s, %ld)\n",
+ list->list[i].type,
+ tmp2,
+ (long) (list->list[i].end - list->list[i].start));
+ }
if (count + 27 > MAX_AGENT_EXPR_LEN)
{
(*str_list)[ndx] = savestring (temp_buf, count);
count = 0;
end = temp_buf;
}
- sprintf (end, "M%X,%X,%X",
+
+ sprintf (end, "M%X,%s,%lX",
list->list[i].type,
- list->list[i].start,
- list->list[i].end - list->list[i].start);
+ tmp2,
+ (long) (list->list[i].end - list->list[i].start));
+
count += strlen (end);
- end += strlen (end);
+ end += count;
}
for (i = 0; i < list->next_aexpr_elt; i++)
char *action_exp;
struct expression *exp = NULL;
struct action_line *action;
- bfd_signed_vma offset;
- long i;
+ int i;
value_ptr tempval;
struct collection_list *collect;
struct cmd_list_element *cmd;
{
QUIT; /* allow user to bail out with ^C */
action_exp = action->action;
- while (isspace (*action_exp))
+ while (isspace ((int) *action_exp))
action_exp++;
if (*action_exp == '#') /* comment line */
do
{ /* repeat over a comma-separated list */
QUIT; /* allow user to bail out with ^C */
- while (isspace (*action_exp))
+ while (isspace ((int) *action_exp))
action_exp++;
if (0 == strncasecmp ("$reg", action_exp, 4))
strcpy (target_buf, "QTro");
for (s = exec_bfd->sections; s; s = s->next)
{
- char tmp[40];
+ char tmp1[40], tmp2[40];
if ((s->flags & SEC_LOAD) == 0 ||
/* (s->flags & SEC_CODE) == 0 || */
anysecs = 1;
lma = s->lma;
size = bfd_get_section_size_before_reloc (s);
- sprintf (tmp, ":%x,%x", lma, lma + size);
- strcat (target_buf, tmp);
+ sprintf_vma (tmp1, lma);
+ sprintf_vma (tmp2, lma + size);
+ sprintf (target_buf + strlen (target_buf),
+ ":%s,%s", tmp1, tmp2);
}
if (anysecs)
{
ALL_TRACEPOINTS (t)
{
- int ss_count; /* if actions include singlestepping */
- int disable_mask; /* ??? */
- int enable_mask; /* ??? */
+ char tmp[40];
- sprintf (buf, "QTDP:%x:%x:%c:%x:%x", t->number, t->address,
+ sprintf_vma (tmp, t->address);
+ sprintf (buf, "QTDP:%x:%s:%c:%x:%x", t->number, tmp, /* address */
t->enabled == enabled ? 'E' : 'D',
t->step_count, t->pass_count);
for (ndx = 0; tdp_actions[ndx]; ndx++)
{
QUIT; /* allow user to bail out with ^C */
- sprintf (buf, "QTDP:-%x:%x:%s%c",
- t->number, t->address,
+ sprintf (buf, "QTDP:-%x:%s:%s%c",
+ t->number, tmp, /* address */
tdp_actions[ndx],
((tdp_actions[ndx + 1] || stepping_actions)
? '-' : 0));
for (ndx = 0; stepping_actions[ndx]; ndx++)
{
QUIT; /* allow user to bail out with ^C */
- sprintf (buf, "QTDP:-%x:%x:%s%s%s",
- t->number, t->address,
+ sprintf (buf, "QTDP:-%x:%s:%s%s%s",
+ t->number, tmp, /* address */
((ndx == 0) ? "S" : ""),
stepping_actions[ndx],
(stepping_actions[ndx + 1] ? "-" : ""));
{ /* STUB_COMM PART_IMPLEMENTED */
/* this should only be called with a numeric argument */
int frameno = -1;
- char *tmp;
if (target_is_remote ())
{
int from_tty;
{ /* STUB_COMM PART_IMPLEMENTED */
CORE_ADDR pc;
- char *tmp;
+ char tmp[40];
if (target_is_remote ())
{
else
pc = parse_and_eval_address (args);
- sprintf (target_buf, "QTFrame:pc:%x", pc);
+ sprintf_vma (tmp, pc);
+ sprintf (target_buf, "QTFrame:pc:%s", tmp);
finish_tfind_command (target_buf, from_tty);
}
else
int from_tty;
{ /* STUB_COMM PART_IMPLEMENTED */
int tdp;
- char buf[40], *tmp;
if (target_is_remote ())
{
static CORE_ADDR start_pc, end_pc;
struct symtabs_and_lines sals;
struct symtab_and_line sal;
- char *tmp;
struct cleanup *old_chain;
+ char startpc_str[40], endpc_str[40];
if (target_is_remote ())
{
error ("Line number %d is out of range for \"%s\".\n",
sal.line, sal.symtab->filename);
+ sprintf_vma (startpc_str, start_pc);
+ sprintf_vma (endpc_str, end_pc - 1);
if (args && *args) /* find within range of stated line */
- sprintf (target_buf, "QTFrame:range:%x:%x", start_pc, end_pc - 1);
+ sprintf (target_buf, "QTFrame:range:%s:%s", startpc_str, endpc_str);
else /* find OUTSIDE OF range of CURRENT line */
- sprintf (target_buf, "QTFrame:outside:%x:%x", start_pc, end_pc - 1);
+ sprintf (target_buf, "QTFrame:outside:%s:%s", startpc_str, endpc_str);
finish_tfind_command (target_buf, from_tty);
do_cleanups (old_chain);
}
trace_find_range_command (args, from_tty)
char *args;
int from_tty;
-{ /* STUB_COMM PART_IMPLEMENTED */
+{
static CORE_ADDR start, stop;
+ char start_str[40], stop_str[40];
char *tmp;
if (target_is_remote ())
{
if (args == 0 || *args == 0)
- { /* XXX FIXME: what should default behavior be? */
+ { /* XXX FIXME: what should default behavior be? */
printf_filtered ("Usage: tfind range <startaddr>,<endaddr>\n");
return;
}
if (0 != (tmp = strchr (args, ',')))
{
*tmp++ = '\0'; /* terminate start address */
- while (isspace (*tmp))
+ while (isspace ((int) *tmp))
tmp++;
start = parse_and_eval_address (args);
stop = parse_and_eval_address (tmp);
stop = start + 1; /* ??? */
}
- sprintf (target_buf, "QTFrame:range:%x:%x", start, stop);
+ sprintf_vma (start_str, start);
+ sprintf_vma (stop_str, stop);
+ sprintf (target_buf, "QTFrame:range:%s:%s", start_str, stop_str);
finish_tfind_command (target_buf, from_tty);
}
else
trace_find_outside_command (args, from_tty)
char *args;
int from_tty;
-{ /* STUB_COMM PART_IMPLEMENTED */
+{
CORE_ADDR start, stop;
+ char start_str[40], stop_str[40];
char *tmp;
if (target_is_remote ())
{
if (args == 0 || *args == 0)
- { /* XXX FIXME: what should default behavior be? */
+ { /* XXX FIXME: what should default behavior be? */
printf_filtered ("Usage: tfind outside <startaddr>,<endaddr>\n");
return;
}
if (0 != (tmp = strchr (args, ',')))
{
*tmp++ = '\0'; /* terminate start address */
- while (isspace (*tmp))
+ while (isspace ((int) *tmp))
tmp++;
start = parse_and_eval_address (args);
stop = parse_and_eval_address (tmp);
stop = start + 1; /* ??? */
}
- sprintf (target_buf, "QTFrame:outside:%x:%x", start, stop);
+ sprintf_vma (start_str, start);
+ sprintf_vma (stop_str, stop);
+ sprintf (target_buf, "QTFrame:outside:%s:%s", start_str, stop_str);
finish_tfind_command (target_buf, from_tty);
}
else
FILE *fp;
char *i1 = " ", *i2 = " ";
char *indent, *actionline;
+ char tmp[40];
if (args == 0 || *args == 0)
error ("Argument required (file name in which to save tracepoints");
if (tp->addr_string)
fprintf (fp, "trace %s\n", tp->addr_string);
else
- fprintf (fp, "trace *0x%x\n", tp->address);
+ {
+ sprintf_vma (tmp, tp->address);
+ fprintf (fp, "trace *0x%s\n", tmp);
+ }
if (tp->pass_count)
fprintf (fp, " passcount %d\n", tp->pass_count);
QUIT; /* allow user to bail out with ^C */
actionline = line->action;
- while (isspace (*actionline))
+ while (isspace ((int) *actionline))
actionline++;
fprintf (fp, "%s%s\n", indent, actionline);
char *args;
int from_tty;
{
- struct symtab_and_line sal;
struct symtabs_and_lines sals;
struct symbol *sym;
struct minimal_symbol *msym;
count--; /* don't count this one */
continue;
case LOC_CONST:
- printf_filtered ("a constant with value %d (0x%x)",
+ printf_filtered ("a constant with value %ld (0x%lx)",
SYMBOL_VALUE (sym), SYMBOL_VALUE (sym));
break;
case LOC_CONST_BYTES:
gdb_stdout);
break;
case LOC_BASEREG:
- printf_filtered ("a variable at offset %d from register $%s",
+ printf_filtered ("a variable at offset %ld from register $%s",
SYMBOL_VALUE (sym),
REGISTER_NAME (SYMBOL_BASEREG (sym)));
break;
case LOC_BASEREG_ARG:
- printf_filtered ("an argument at offset %d from register $%s",
+ printf_filtered ("an argument at offset %ld from register $%s",
SYMBOL_VALUE (sym),
REGISTER_NAME (SYMBOL_BASEREG (sym)));
break;
QUIT; /* allow user to bail out with ^C */
action_exp = action->action;
- while (isspace (*action_exp))
+ while (isspace ((int) *action_exp))
action_exp++;
/* The collection actions to be done while stepping are
QUIT; /* allow user to bail out with ^C */
if (*action_exp == ',')
action_exp++;
- while (isspace (*action_exp))
+ while (isspace ((int) *action_exp))
action_exp++;
next_comma = strchr (action_exp, ',');
#include "defs.h"
#include <ctype.h>
#include "gdb_string.h"
-#ifdef HAVE_UNISTD_H
-#include <unistd.h>
-#endif
+#include "event-loop.h"
#ifdef HAVE_CURSES_H
#include <curses.h>
static void
set_width PARAMS ((void));
-/* If this definition isn't overridden by the header files, assume
- that isatty and fileno exist on this system. */
-#ifndef ISATTY
-#define ISATTY(FP) (isatty (fileno (FP)))
-#endif
-
#ifndef GDB_FILE_ISATTY
#define GDB_FILE_ISATTY(GDB_FILE_PTR) (gdb_file_isatty(GDB_FILE_PTR))
#endif
/* A ``struct gdb_file'' that is compatible with all the legacy
code. */
+/* new */
+enum streamtype
+{
+ afile,
+ astring
+};
+
+/* new */
+struct tui_stream
+{
+ int *ts_magic;
+ enum streamtype ts_streamtype;
+ FILE *ts_filestream;
+ char *ts_strbuf;
+ int ts_buflen;
+};
+
static gdb_file_flush_ftype tui_file_flush;
extern gdb_file_fputs_ftype tui_file_fputs;
static gdb_file_isatty_ftype tui_file_isatty;
}
}
+/* All TUI I/O sent to the *_filtered and *_unfiltered functions
+ eventually ends up here. The fputs_unfiltered_hook is primarily
+ used by GUIs to collect all output and send it to the GUI, instead
+ of the controlling terminal. Only output to gdb_stdout and
+ gdb_stderr are sent to the hook. Everything else is sent on to
+ fputs to allow file I/O to be handled appropriately. */
+
+/* FIXME: Should be broken up and moved to a TUI specific file. */
+
+void
+tui_file_fputs (linebuffer, file)
+ const char *linebuffer;
+ GDB_FILE *file;
+{
+ struct tui_stream *stream = gdb_file_data (file);
+#if defined(TUI)
+ extern int tui_owns_terminal;
+#endif
+ /* If anything (GUI, TUI) wants to capture GDB output, this is
+ * the place... the way to do it is to set up
+ * fputs_unfiltered_hook.
+ * Our TUI ("gdb -tui") used to hook output, but in the
+ * new (XDB style) scheme, we do not do that anymore... - RT
+ */
+ if (fputs_unfiltered_hook
+ && (file == gdb_stdout
+ || file == gdb_stderr))
+ fputs_unfiltered_hook (linebuffer, file);
+ else
+ {
+#if defined(TUI)
+ if (tui_version && tui_owns_terminal)
+ {
+ /* If we get here somehow while updating the TUI (from
+ * within a tuiDo(), then we need to temporarily
+ * set up the terminal for GDB output. This probably just
+ * happens on error output.
+ */
+
+ if (stream->ts_streamtype == astring)
+ {
+ gdb_file_adjust_strbuf (strlen (linebuffer), stream);
+ strcat (stream->ts_strbuf, linebuffer);
+ }
+ else
+ {
+ tuiTermUnsetup (0, (tui_version) ? cmdWin->detail.commandInfo.curch : 0);
+ fputs (linebuffer, stream->ts_filestream);
+ tuiTermSetup (0);
+ if (linebuffer[strlen (linebuffer) - 1] == '\n')
+ tuiClearCommandCharCount ();
+ else
+ tuiIncrCommandCharCountBy (strlen (linebuffer));
+ }
+ }
+ else
+ {
+ /* The normal case - just do a fputs() */
+ if (stream->ts_streamtype == astring)
+ {
+ gdb_file_adjust_strbuf (strlen (linebuffer), stream);
+ strcat (stream->ts_strbuf, linebuffer);
+ }
+ else
+ fputs (linebuffer, stream->ts_filestream);
+ }
+
+
+#else
+ if (stream->ts_streamtype == astring)
+ {
+ gdb_file_adjust_strbuf (strlen (linebuffer), file);
+ strcat (stream->ts_strbuf, linebuffer);
+ }
+ else
+ fputs (linebuffer, stream->ts_filestream);
+#endif
+ }
+}
+
GDB_FILE *
gdb_file_init_astring (n)
int n;
*/
-static int thirty_two = 32; /* eliminate warning from compiler on 32-bit systems */
+/* eliminate warning from compiler on 32-bit systems */
+static int thirty_two = 32;
char *
-paddr (addr)
- t_addr addr;
+paddr (CORE_ADDR addr)
{
char *paddr_str = get_cell ();
- switch (sizeof (t_addr))
+ switch (TARGET_PTR_BIT / 8)
{
case 8:
sprintf (paddr_str, "%08lx%08lx",
}
char *
-preg (reg)
- t_reg reg;
-{
- char *preg_str = get_cell ();
- switch (sizeof (t_reg))
- {
- case 8:
- sprintf (preg_str, "%08lx%08lx",
- (unsigned long) (reg >> thirty_two), (unsigned long) (reg & 0xffffffff));
- break;
- case 4:
- sprintf (preg_str, "%08lx", (unsigned long) reg);
- break;
- case 2:
- sprintf (preg_str, "%04x", (unsigned short) (reg & 0xffff));
- break;
- default:
- sprintf (preg_str, "%lx", (unsigned long) reg);
- }
- return preg_str;
-}
-
-char *
-paddr_nz (addr)
- t_addr addr;
+paddr_nz (CORE_ADDR addr)
{
char *paddr_str = get_cell ();
- switch (sizeof (t_addr))
+ switch (TARGET_PTR_BIT / 8)
{
case 8:
{
return paddr_str;
}
+static void
+decimal2str (char *paddr_str, char *sign, ULONGEST addr)
+{
+ /* steal code from valprint.c:print_decimal(). Should this worry
+ about the real size of addr as the above does? */
+ unsigned long temp[3];
+ int i = 0;
+ do
+ {
+ temp[i] = addr % (1000 * 1000 * 1000);
+ addr /= (1000 * 1000 * 1000);
+ i++;
+ }
+ while (addr != 0 && i < (sizeof (temp) / sizeof (temp[0])));
+ switch (i)
+ {
+ case 1:
+ sprintf (paddr_str, "%s%lu",
+ sign, temp[0]);
+ break;
+ case 2:
+ sprintf (paddr_str, "%s%lu%09lu",
+ sign, temp[1], temp[0]);
+ break;
+ case 3:
+ sprintf (paddr_str, "%s%lu%09lu%09lu",
+ sign, temp[2], temp[1], temp[0]);
+ break;
+ default:
+ abort ();
+ }
+}
+
+char *
+paddr_u (CORE_ADDR addr)
+{
+ char *paddr_str = get_cell ();
+ decimal2str (paddr_str, "", addr);
+ return paddr_str;
+}
+
+char *
+paddr_d (LONGEST addr)
+{
+ char *paddr_str = get_cell ();
+ if (addr < 0)
+ decimal2str (paddr_str, "-", -addr);
+ else
+ decimal2str (paddr_str, "", addr);
+ return paddr_str;
+}
+
+char *
+preg (reg)
+ t_reg reg;
+{
+ char *preg_str = get_cell ();
+ switch (sizeof (t_reg))
+ {
+ case 8:
+ sprintf (preg_str, "%08lx%08lx",
+ (unsigned long) (reg >> thirty_two), (unsigned long) (reg & 0xffffffff));
+ break;
+ case 4:
+ sprintf (preg_str, "%08lx", (unsigned long) reg);
+ break;
+ case 2:
+ sprintf (preg_str, "%04x", (unsigned short) (reg & 0xffff));
+ break;
+ default:
+ sprintf (preg_str, "%lx", (unsigned long) reg);
+ }
+ return preg_str;
+}
+
char *
preg_nz (reg)
t_reg reg;
#include "gdbtypes.h"
#include "expression.h"
-#ifdef __STDC__
struct frame_info;
struct fn_field;
-#endif
extern void
print_address_demangle PARAMS ((CORE_ADDR, GDB_FILE *, int));
#include "gdbthread.h"
#include "gdbcmd.h"
#include <sys/param.h>
-#include <unistd.h>
/* The ui's event loop. */
extern int (*ui_loop_hook) PARAMS ((int signo));
+1999-08-28 Doug Evans <devans@casey.cygnus.com>
+
+ * cgen-types.h (mode_type,MODE_VOID): Renamed from MODE_VM.
+ * cgen-utils.c (mode_names): Update.
+
1999-08-20 Doug Evans <devans@casey.cygnus.com>
* genmloop.sh: New args -parallel-generic-write, -parallel-only.
/* Common mode types. */
/* ??? Target specific modes. */
typedef enum mode_type {
- MODE_VM, MODE_BI,
+ MODE_VOID, MODE_BI,
MODE_QI, MODE_HI, MODE_SI, MODE_DI,
MODE_UQI, MODE_UHI, MODE_USI, MODE_UDI,
MODE_SF, MODE_DF, MODE_XF, MODE_TF,
#define min(a,b) ((a) < (b) ? (a) : (b))
const char *mode_names[] = {
- "VM",
+ "VOID",
"BI",
"QI",
"HI",
+1999-08-28 Doug Evans <devans@casey.cygnus.com>
+
+ * cpu.h,decode.c,sem-switch.c,sem.c: Rebuild.
+
1999-08-09 Doug Evans <devans@casey.cygnus.com>
* cpu.h,decode.c,decode.h,model.c,sem-switch.c,sem.c: Rebuild.
UINT f_src2;
UINT f_srcdst;
unsigned char out_dst;
- unsigned char out_h_gr_add__VM_index_of_dst_1;
+ unsigned char out_h_gr_add__DFLT_index_of__DFLT_dst_1;
} sfmt_emul3;
struct { /* */
SI* i_dst;
UINT f_srcdst;
unsigned char in_src1;
unsigned char out_dst;
- unsigned char out_h_gr_add__VM_index_of_dst_1;
+ unsigned char out_h_gr_add__DFLT_index_of__DFLT_dst_1;
} sfmt_emul2;
struct { /* */
SI* i_dst;
UINT f_srcdst;
unsigned char in_src2;
unsigned char out_dst;
- unsigned char out_h_gr_add__VM_index_of_dst_1;
+ unsigned char out_h_gr_add__DFLT_index_of__DFLT_dst_1;
} sfmt_emul1;
struct { /* */
SI* i_dst;
unsigned char in_src1;
unsigned char in_src2;
unsigned char out_dst;
- unsigned char out_h_gr_add__VM_index_of_dst_1;
+ unsigned char out_h_gr_add__DFLT_index_of__DFLT_dst_1;
} sfmt_emul;
struct { /* */
SI* i_abase;
UINT f_offset;
UINT f_srcdst;
unsigned char in_abase;
- unsigned char in_h_gr_add__VM_index_of_st_src_1;
- unsigned char in_h_gr_add__VM_index_of_st_src_2;
- unsigned char in_h_gr_add__VM_index_of_st_src_3;
+ unsigned char in_h_gr_add__DFLT_index_of__DFLT_st_src_1;
+ unsigned char in_h_gr_add__DFLT_index_of__DFLT_st_src_2;
+ unsigned char in_h_gr_add__DFLT_index_of__DFLT_st_src_3;
unsigned char in_st_src;
} sfmt_stq_indirect_offset;
struct { /* */
UINT f_srcdst;
unsigned char in_abase;
unsigned char out_dst;
- unsigned char out_h_gr_add__VM_index_of_dst_1;
- unsigned char out_h_gr_add__VM_index_of_dst_2;
- unsigned char out_h_gr_add__VM_index_of_dst_3;
+ unsigned char out_h_gr_add__DFLT_index_of__DFLT_dst_1;
+ unsigned char out_h_gr_add__DFLT_index_of__DFLT_dst_2;
+ unsigned char out_h_gr_add__DFLT_index_of__DFLT_dst_3;
} sfmt_ldq_indirect_offset;
struct { /* */
SI* i_abase;
UINT f_scale;
UINT f_srcdst;
unsigned char in_abase;
- unsigned char in_h_gr_add__VM_index_of_st_src_1;
- unsigned char in_h_gr_add__VM_index_of_st_src_2;
- unsigned char in_h_gr_add__VM_index_of_st_src_3;
+ unsigned char in_h_gr_add__DFLT_index_of__DFLT_st_src_1;
+ unsigned char in_h_gr_add__DFLT_index_of__DFLT_st_src_2;
+ unsigned char in_h_gr_add__DFLT_index_of__DFLT_st_src_3;
unsigned char in_index;
unsigned char in_st_src;
} sfmt_stq_indirect_index_disp;
unsigned char in_abase;
unsigned char in_index;
unsigned char out_dst;
- unsigned char out_h_gr_add__VM_index_of_dst_1;
- unsigned char out_h_gr_add__VM_index_of_dst_2;
- unsigned char out_h_gr_add__VM_index_of_dst_3;
+ unsigned char out_h_gr_add__DFLT_index_of__DFLT_dst_1;
+ unsigned char out_h_gr_add__DFLT_index_of__DFLT_dst_2;
+ unsigned char out_h_gr_add__DFLT_index_of__DFLT_dst_3;
} sfmt_ldq_indirect_index_disp;
struct { /* */
SI* i_dst;
SI* i_src1;
UINT f_src1;
UINT f_srcdst;
- unsigned char in_h_gr_add__VM_index_of_src1_1;
- unsigned char in_h_gr_add__VM_index_of_src1_2;
- unsigned char in_h_gr_add__VM_index_of_src1_3;
+ unsigned char in_h_gr_add__DFLT_index_of__DFLT_src1_1;
+ unsigned char in_h_gr_add__DFLT_index_of__DFLT_src1_2;
+ unsigned char in_h_gr_add__DFLT_index_of__DFLT_src1_3;
unsigned char in_src1;
unsigned char out_dst;
- unsigned char out_h_gr_add__VM_index_of_dst_1;
- unsigned char out_h_gr_add__VM_index_of_dst_2;
- unsigned char out_h_gr_add__VM_index_of_dst_3;
+ unsigned char out_h_gr_add__DFLT_index_of__DFLT_dst_1;
+ unsigned char out_h_gr_add__DFLT_index_of__DFLT_dst_2;
+ unsigned char out_h_gr_add__DFLT_index_of__DFLT_dst_3;
} sfmt_movq;
struct { /* */
UINT f_optdisp;
FLD (in_src1) = f_src1;
FLD (in_src2) = f_src2;
FLD (out_dst) = f_srcdst;
- FLD (out_h_gr_add__VM_index_of_dst_1) = ((FLD (f_srcdst)) + (1));
+ FLD (out_h_gr_add__DFLT_index_of__DFLT_dst_1) = ((FLD (f_srcdst)) + (1));
}
#endif
#undef FLD
{
FLD (in_src2) = f_src2;
FLD (out_dst) = f_srcdst;
- FLD (out_h_gr_add__VM_index_of_dst_1) = ((FLD (f_srcdst)) + (1));
+ FLD (out_h_gr_add__DFLT_index_of__DFLT_dst_1) = ((FLD (f_srcdst)) + (1));
}
#endif
#undef FLD
{
FLD (in_src1) = f_src1;
FLD (out_dst) = f_srcdst;
- FLD (out_h_gr_add__VM_index_of_dst_1) = ((FLD (f_srcdst)) + (1));
+ FLD (out_h_gr_add__DFLT_index_of__DFLT_dst_1) = ((FLD (f_srcdst)) + (1));
}
#endif
#undef FLD
if (PROFILE_MODEL_P (current_cpu))
{
FLD (out_dst) = f_srcdst;
- FLD (out_h_gr_add__VM_index_of_dst_1) = ((FLD (f_srcdst)) + (1));
+ FLD (out_h_gr_add__DFLT_index_of__DFLT_dst_1) = ((FLD (f_srcdst)) + (1));
}
#endif
#undef FLD
/* Record the fields for profiling. */
if (PROFILE_MODEL_P (current_cpu))
{
- FLD (in_h_gr_add__VM_index_of_src1_1) = ((FLD (f_src1)) + (1));
+ FLD (in_h_gr_add__DFLT_index_of__DFLT_src1_1) = ((FLD (f_src1)) + (1));
FLD (in_src1) = f_src1;
FLD (out_dst) = f_srcdst;
- FLD (out_h_gr_add__VM_index_of_dst_1) = ((FLD (f_srcdst)) + (1));
+ FLD (out_h_gr_add__DFLT_index_of__DFLT_dst_1) = ((FLD (f_srcdst)) + (1));
}
#endif
#undef FLD
if (PROFILE_MODEL_P (current_cpu))
{
FLD (out_dst) = f_srcdst;
- FLD (out_h_gr_add__VM_index_of_dst_1) = ((FLD (f_srcdst)) + (1));
+ FLD (out_h_gr_add__DFLT_index_of__DFLT_dst_1) = ((FLD (f_srcdst)) + (1));
}
#endif
#undef FLD
/* Record the fields for profiling. */
if (PROFILE_MODEL_P (current_cpu))
{
- FLD (in_h_gr_add__VM_index_of_src1_1) = ((FLD (f_src1)) + (1));
- FLD (in_h_gr_add__VM_index_of_src1_2) = ((FLD (f_src1)) + (2));
+ FLD (in_h_gr_add__DFLT_index_of__DFLT_src1_1) = ((FLD (f_src1)) + (1));
+ FLD (in_h_gr_add__DFLT_index_of__DFLT_src1_2) = ((FLD (f_src1)) + (2));
FLD (in_src1) = f_src1;
FLD (out_dst) = f_srcdst;
- FLD (out_h_gr_add__VM_index_of_dst_1) = ((FLD (f_srcdst)) + (1));
- FLD (out_h_gr_add__VM_index_of_dst_2) = ((FLD (f_srcdst)) + (2));
+ FLD (out_h_gr_add__DFLT_index_of__DFLT_dst_1) = ((FLD (f_srcdst)) + (1));
+ FLD (out_h_gr_add__DFLT_index_of__DFLT_dst_2) = ((FLD (f_srcdst)) + (2));
}
#endif
#undef FLD
if (PROFILE_MODEL_P (current_cpu))
{
FLD (out_dst) = f_srcdst;
- FLD (out_h_gr_add__VM_index_of_dst_1) = ((FLD (f_srcdst)) + (1));
- FLD (out_h_gr_add__VM_index_of_dst_2) = ((FLD (f_srcdst)) + (2));
+ FLD (out_h_gr_add__DFLT_index_of__DFLT_dst_1) = ((FLD (f_srcdst)) + (1));
+ FLD (out_h_gr_add__DFLT_index_of__DFLT_dst_2) = ((FLD (f_srcdst)) + (2));
}
#endif
#undef FLD
/* Record the fields for profiling. */
if (PROFILE_MODEL_P (current_cpu))
{
- FLD (in_h_gr_add__VM_index_of_src1_1) = ((FLD (f_src1)) + (1));
- FLD (in_h_gr_add__VM_index_of_src1_2) = ((FLD (f_src1)) + (2));
- FLD (in_h_gr_add__VM_index_of_src1_3) = ((FLD (f_src1)) + (3));
+ FLD (in_h_gr_add__DFLT_index_of__DFLT_src1_1) = ((FLD (f_src1)) + (1));
+ FLD (in_h_gr_add__DFLT_index_of__DFLT_src1_2) = ((FLD (f_src1)) + (2));
+ FLD (in_h_gr_add__DFLT_index_of__DFLT_src1_3) = ((FLD (f_src1)) + (3));
FLD (in_src1) = f_src1;
FLD (out_dst) = f_srcdst;
- FLD (out_h_gr_add__VM_index_of_dst_1) = ((FLD (f_srcdst)) + (1));
- FLD (out_h_gr_add__VM_index_of_dst_2) = ((FLD (f_srcdst)) + (2));
- FLD (out_h_gr_add__VM_index_of_dst_3) = ((FLD (f_srcdst)) + (3));
+ FLD (out_h_gr_add__DFLT_index_of__DFLT_dst_1) = ((FLD (f_srcdst)) + (1));
+ FLD (out_h_gr_add__DFLT_index_of__DFLT_dst_2) = ((FLD (f_srcdst)) + (2));
+ FLD (out_h_gr_add__DFLT_index_of__DFLT_dst_3) = ((FLD (f_srcdst)) + (3));
}
#endif
#undef FLD
if (PROFILE_MODEL_P (current_cpu))
{
FLD (out_dst) = f_srcdst;
- FLD (out_h_gr_add__VM_index_of_dst_1) = ((FLD (f_srcdst)) + (1));
- FLD (out_h_gr_add__VM_index_of_dst_2) = ((FLD (f_srcdst)) + (2));
- FLD (out_h_gr_add__VM_index_of_dst_3) = ((FLD (f_srcdst)) + (3));
+ FLD (out_h_gr_add__DFLT_index_of__DFLT_dst_1) = ((FLD (f_srcdst)) + (1));
+ FLD (out_h_gr_add__DFLT_index_of__DFLT_dst_2) = ((FLD (f_srcdst)) + (2));
+ FLD (out_h_gr_add__DFLT_index_of__DFLT_dst_3) = ((FLD (f_srcdst)) + (3));
}
#endif
#undef FLD
if (PROFILE_MODEL_P (current_cpu))
{
FLD (out_dst) = f_srcdst;
- FLD (out_h_gr_add__VM_index_of_dst_1) = ((FLD (f_srcdst)) + (1));
+ FLD (out_h_gr_add__DFLT_index_of__DFLT_dst_1) = ((FLD (f_srcdst)) + (1));
}
#endif
#undef FLD
{
FLD (in_abase) = f_abase;
FLD (out_dst) = f_srcdst;
- FLD (out_h_gr_add__VM_index_of_dst_1) = ((FLD (f_srcdst)) + (1));
+ FLD (out_h_gr_add__DFLT_index_of__DFLT_dst_1) = ((FLD (f_srcdst)) + (1));
}
#endif
#undef FLD
{
FLD (in_abase) = f_abase;
FLD (out_dst) = f_srcdst;
- FLD (out_h_gr_add__VM_index_of_dst_1) = ((FLD (f_srcdst)) + (1));
+ FLD (out_h_gr_add__DFLT_index_of__DFLT_dst_1) = ((FLD (f_srcdst)) + (1));
}
#endif
#undef FLD
FLD (in_abase) = f_abase;
FLD (in_index) = f_index;
FLD (out_dst) = f_srcdst;
- FLD (out_h_gr_add__VM_index_of_dst_1) = ((FLD (f_srcdst)) + (1));
+ FLD (out_h_gr_add__DFLT_index_of__DFLT_dst_1) = ((FLD (f_srcdst)) + (1));
}
#endif
#undef FLD
if (PROFILE_MODEL_P (current_cpu))
{
FLD (out_dst) = f_srcdst;
- FLD (out_h_gr_add__VM_index_of_dst_1) = ((FLD (f_srcdst)) + (1));
+ FLD (out_h_gr_add__DFLT_index_of__DFLT_dst_1) = ((FLD (f_srcdst)) + (1));
}
#endif
#undef FLD
{
FLD (in_abase) = f_abase;
FLD (out_dst) = f_srcdst;
- FLD (out_h_gr_add__VM_index_of_dst_1) = ((FLD (f_srcdst)) + (1));
+ FLD (out_h_gr_add__DFLT_index_of__DFLT_dst_1) = ((FLD (f_srcdst)) + (1));
}
#endif
#undef FLD
{
FLD (in_index) = f_index;
FLD (out_dst) = f_srcdst;
- FLD (out_h_gr_add__VM_index_of_dst_1) = ((FLD (f_srcdst)) + (1));
+ FLD (out_h_gr_add__DFLT_index_of__DFLT_dst_1) = ((FLD (f_srcdst)) + (1));
}
#endif
#undef FLD
FLD (in_abase) = f_abase;
FLD (in_index) = f_index;
FLD (out_dst) = f_srcdst;
- FLD (out_h_gr_add__VM_index_of_dst_1) = ((FLD (f_srcdst)) + (1));
+ FLD (out_h_gr_add__DFLT_index_of__DFLT_dst_1) = ((FLD (f_srcdst)) + (1));
}
#endif
#undef FLD
if (PROFILE_MODEL_P (current_cpu))
{
FLD (out_dst) = f_srcdst;
- FLD (out_h_gr_add__VM_index_of_dst_1) = ((FLD (f_srcdst)) + (1));
- FLD (out_h_gr_add__VM_index_of_dst_2) = ((FLD (f_srcdst)) + (2));
+ FLD (out_h_gr_add__DFLT_index_of__DFLT_dst_1) = ((FLD (f_srcdst)) + (1));
+ FLD (out_h_gr_add__DFLT_index_of__DFLT_dst_2) = ((FLD (f_srcdst)) + (2));
}
#endif
#undef FLD
{
FLD (in_abase) = f_abase;
FLD (out_dst) = f_srcdst;
- FLD (out_h_gr_add__VM_index_of_dst_1) = ((FLD (f_srcdst)) + (1));
- FLD (out_h_gr_add__VM_index_of_dst_2) = ((FLD (f_srcdst)) + (2));
+ FLD (out_h_gr_add__DFLT_index_of__DFLT_dst_1) = ((FLD (f_srcdst)) + (1));
+ FLD (out_h_gr_add__DFLT_index_of__DFLT_dst_2) = ((FLD (f_srcdst)) + (2));
}
#endif
#undef FLD
{
FLD (in_abase) = f_abase;
FLD (out_dst) = f_srcdst;
- FLD (out_h_gr_add__VM_index_of_dst_1) = ((FLD (f_srcdst)) + (1));
- FLD (out_h_gr_add__VM_index_of_dst_2) = ((FLD (f_srcdst)) + (2));
+ FLD (out_h_gr_add__DFLT_index_of__DFLT_dst_1) = ((FLD (f_srcdst)) + (1));
+ FLD (out_h_gr_add__DFLT_index_of__DFLT_dst_2) = ((FLD (f_srcdst)) + (2));
}
#endif
#undef FLD
FLD (in_abase) = f_abase;
FLD (in_index) = f_index;
FLD (out_dst) = f_srcdst;
- FLD (out_h_gr_add__VM_index_of_dst_1) = ((FLD (f_srcdst)) + (1));
- FLD (out_h_gr_add__VM_index_of_dst_2) = ((FLD (f_srcdst)) + (2));
+ FLD (out_h_gr_add__DFLT_index_of__DFLT_dst_1) = ((FLD (f_srcdst)) + (1));
+ FLD (out_h_gr_add__DFLT_index_of__DFLT_dst_2) = ((FLD (f_srcdst)) + (2));
}
#endif
#undef FLD
if (PROFILE_MODEL_P (current_cpu))
{
FLD (out_dst) = f_srcdst;
- FLD (out_h_gr_add__VM_index_of_dst_1) = ((FLD (f_srcdst)) + (1));
- FLD (out_h_gr_add__VM_index_of_dst_2) = ((FLD (f_srcdst)) + (2));
+ FLD (out_h_gr_add__DFLT_index_of__DFLT_dst_1) = ((FLD (f_srcdst)) + (1));
+ FLD (out_h_gr_add__DFLT_index_of__DFLT_dst_2) = ((FLD (f_srcdst)) + (2));
}
#endif
#undef FLD
{
FLD (in_abase) = f_abase;
FLD (out_dst) = f_srcdst;
- FLD (out_h_gr_add__VM_index_of_dst_1) = ((FLD (f_srcdst)) + (1));
- FLD (out_h_gr_add__VM_index_of_dst_2) = ((FLD (f_srcdst)) + (2));
+ FLD (out_h_gr_add__DFLT_index_of__DFLT_dst_1) = ((FLD (f_srcdst)) + (1));
+ FLD (out_h_gr_add__DFLT_index_of__DFLT_dst_2) = ((FLD (f_srcdst)) + (2));
}
#endif
#undef FLD
{
FLD (in_index) = f_index;
FLD (out_dst) = f_srcdst;
- FLD (out_h_gr_add__VM_index_of_dst_1) = ((FLD (f_srcdst)) + (1));
- FLD (out_h_gr_add__VM_index_of_dst_2) = ((FLD (f_srcdst)) + (2));
+ FLD (out_h_gr_add__DFLT_index_of__DFLT_dst_1) = ((FLD (f_srcdst)) + (1));
+ FLD (out_h_gr_add__DFLT_index_of__DFLT_dst_2) = ((FLD (f_srcdst)) + (2));
}
#endif
#undef FLD
FLD (in_abase) = f_abase;
FLD (in_index) = f_index;
FLD (out_dst) = f_srcdst;
- FLD (out_h_gr_add__VM_index_of_dst_1) = ((FLD (f_srcdst)) + (1));
- FLD (out_h_gr_add__VM_index_of_dst_2) = ((FLD (f_srcdst)) + (2));
+ FLD (out_h_gr_add__DFLT_index_of__DFLT_dst_1) = ((FLD (f_srcdst)) + (1));
+ FLD (out_h_gr_add__DFLT_index_of__DFLT_dst_2) = ((FLD (f_srcdst)) + (2));
}
#endif
#undef FLD
if (PROFILE_MODEL_P (current_cpu))
{
FLD (out_dst) = f_srcdst;
- FLD (out_h_gr_add__VM_index_of_dst_1) = ((FLD (f_srcdst)) + (1));
- FLD (out_h_gr_add__VM_index_of_dst_2) = ((FLD (f_srcdst)) + (2));
- FLD (out_h_gr_add__VM_index_of_dst_3) = ((FLD (f_srcdst)) + (3));
+ FLD (out_h_gr_add__DFLT_index_of__DFLT_dst_1) = ((FLD (f_srcdst)) + (1));
+ FLD (out_h_gr_add__DFLT_index_of__DFLT_dst_2) = ((FLD (f_srcdst)) + (2));
+ FLD (out_h_gr_add__DFLT_index_of__DFLT_dst_3) = ((FLD (f_srcdst)) + (3));
}
#endif
#undef FLD
{
FLD (in_abase) = f_abase;
FLD (out_dst) = f_srcdst;
- FLD (out_h_gr_add__VM_index_of_dst_1) = ((FLD (f_srcdst)) + (1));
- FLD (out_h_gr_add__VM_index_of_dst_2) = ((FLD (f_srcdst)) + (2));
- FLD (out_h_gr_add__VM_index_of_dst_3) = ((FLD (f_srcdst)) + (3));
+ FLD (out_h_gr_add__DFLT_index_of__DFLT_dst_1) = ((FLD (f_srcdst)) + (1));
+ FLD (out_h_gr_add__DFLT_index_of__DFLT_dst_2) = ((FLD (f_srcdst)) + (2));
+ FLD (out_h_gr_add__DFLT_index_of__DFLT_dst_3) = ((FLD (f_srcdst)) + (3));
}
#endif
#undef FLD
{
FLD (in_abase) = f_abase;
FLD (out_dst) = f_srcdst;
- FLD (out_h_gr_add__VM_index_of_dst_1) = ((FLD (f_srcdst)) + (1));
- FLD (out_h_gr_add__VM_index_of_dst_2) = ((FLD (f_srcdst)) + (2));
- FLD (out_h_gr_add__VM_index_of_dst_3) = ((FLD (f_srcdst)) + (3));
+ FLD (out_h_gr_add__DFLT_index_of__DFLT_dst_1) = ((FLD (f_srcdst)) + (1));
+ FLD (out_h_gr_add__DFLT_index_of__DFLT_dst_2) = ((FLD (f_srcdst)) + (2));
+ FLD (out_h_gr_add__DFLT_index_of__DFLT_dst_3) = ((FLD (f_srcdst)) + (3));
}
#endif
#undef FLD
FLD (in_abase) = f_abase;
FLD (in_index) = f_index;
FLD (out_dst) = f_srcdst;
- FLD (out_h_gr_add__VM_index_of_dst_1) = ((FLD (f_srcdst)) + (1));
- FLD (out_h_gr_add__VM_index_of_dst_2) = ((FLD (f_srcdst)) + (2));
- FLD (out_h_gr_add__VM_index_of_dst_3) = ((FLD (f_srcdst)) + (3));
+ FLD (out_h_gr_add__DFLT_index_of__DFLT_dst_1) = ((FLD (f_srcdst)) + (1));
+ FLD (out_h_gr_add__DFLT_index_of__DFLT_dst_2) = ((FLD (f_srcdst)) + (2));
+ FLD (out_h_gr_add__DFLT_index_of__DFLT_dst_3) = ((FLD (f_srcdst)) + (3));
}
#endif
#undef FLD
if (PROFILE_MODEL_P (current_cpu))
{
FLD (out_dst) = f_srcdst;
- FLD (out_h_gr_add__VM_index_of_dst_1) = ((FLD (f_srcdst)) + (1));
- FLD (out_h_gr_add__VM_index_of_dst_2) = ((FLD (f_srcdst)) + (2));
- FLD (out_h_gr_add__VM_index_of_dst_3) = ((FLD (f_srcdst)) + (3));
+ FLD (out_h_gr_add__DFLT_index_of__DFLT_dst_1) = ((FLD (f_srcdst)) + (1));
+ FLD (out_h_gr_add__DFLT_index_of__DFLT_dst_2) = ((FLD (f_srcdst)) + (2));
+ FLD (out_h_gr_add__DFLT_index_of__DFLT_dst_3) = ((FLD (f_srcdst)) + (3));
}
#endif
#undef FLD
{
FLD (in_abase) = f_abase;
FLD (out_dst) = f_srcdst;
- FLD (out_h_gr_add__VM_index_of_dst_1) = ((FLD (f_srcdst)) + (1));
- FLD (out_h_gr_add__VM_index_of_dst_2) = ((FLD (f_srcdst)) + (2));
- FLD (out_h_gr_add__VM_index_of_dst_3) = ((FLD (f_srcdst)) + (3));
+ FLD (out_h_gr_add__DFLT_index_of__DFLT_dst_1) = ((FLD (f_srcdst)) + (1));
+ FLD (out_h_gr_add__DFLT_index_of__DFLT_dst_2) = ((FLD (f_srcdst)) + (2));
+ FLD (out_h_gr_add__DFLT_index_of__DFLT_dst_3) = ((FLD (f_srcdst)) + (3));
}
#endif
#undef FLD
{
FLD (in_index) = f_index;
FLD (out_dst) = f_srcdst;
- FLD (out_h_gr_add__VM_index_of_dst_1) = ((FLD (f_srcdst)) + (1));
- FLD (out_h_gr_add__VM_index_of_dst_2) = ((FLD (f_srcdst)) + (2));
- FLD (out_h_gr_add__VM_index_of_dst_3) = ((FLD (f_srcdst)) + (3));
+ FLD (out_h_gr_add__DFLT_index_of__DFLT_dst_1) = ((FLD (f_srcdst)) + (1));
+ FLD (out_h_gr_add__DFLT_index_of__DFLT_dst_2) = ((FLD (f_srcdst)) + (2));
+ FLD (out_h_gr_add__DFLT_index_of__DFLT_dst_3) = ((FLD (f_srcdst)) + (3));
}
#endif
#undef FLD
FLD (in_abase) = f_abase;
FLD (in_index) = f_index;
FLD (out_dst) = f_srcdst;
- FLD (out_h_gr_add__VM_index_of_dst_1) = ((FLD (f_srcdst)) + (1));
- FLD (out_h_gr_add__VM_index_of_dst_2) = ((FLD (f_srcdst)) + (2));
- FLD (out_h_gr_add__VM_index_of_dst_3) = ((FLD (f_srcdst)) + (3));
+ FLD (out_h_gr_add__DFLT_index_of__DFLT_dst_1) = ((FLD (f_srcdst)) + (1));
+ FLD (out_h_gr_add__DFLT_index_of__DFLT_dst_2) = ((FLD (f_srcdst)) + (2));
+ FLD (out_h_gr_add__DFLT_index_of__DFLT_dst_3) = ((FLD (f_srcdst)) + (3));
}
#endif
#undef FLD
/* Record the fields for profiling. */
if (PROFILE_MODEL_P (current_cpu))
{
- FLD (in_h_gr_add__VM_index_of_st_src_1) = ((FLD (f_srcdst)) + (1));
+ FLD (in_h_gr_add__DFLT_index_of__DFLT_st_src_1) = ((FLD (f_srcdst)) + (1));
FLD (in_st_src) = f_srcdst;
}
#endif
if (PROFILE_MODEL_P (current_cpu))
{
FLD (in_abase) = f_abase;
- FLD (in_h_gr_add__VM_index_of_st_src_1) = ((FLD (f_srcdst)) + (1));
+ FLD (in_h_gr_add__DFLT_index_of__DFLT_st_src_1) = ((FLD (f_srcdst)) + (1));
FLD (in_st_src) = f_srcdst;
}
#endif
if (PROFILE_MODEL_P (current_cpu))
{
FLD (in_abase) = f_abase;
- FLD (in_h_gr_add__VM_index_of_st_src_1) = ((FLD (f_srcdst)) + (1));
+ FLD (in_h_gr_add__DFLT_index_of__DFLT_st_src_1) = ((FLD (f_srcdst)) + (1));
FLD (in_st_src) = f_srcdst;
}
#endif
if (PROFILE_MODEL_P (current_cpu))
{
FLD (in_abase) = f_abase;
- FLD (in_h_gr_add__VM_index_of_st_src_1) = ((FLD (f_srcdst)) + (1));
+ FLD (in_h_gr_add__DFLT_index_of__DFLT_st_src_1) = ((FLD (f_srcdst)) + (1));
FLD (in_index) = f_index;
FLD (in_st_src) = f_srcdst;
}
/* Record the fields for profiling. */
if (PROFILE_MODEL_P (current_cpu))
{
- FLD (in_h_gr_add__VM_index_of_st_src_1) = ((FLD (f_srcdst)) + (1));
+ FLD (in_h_gr_add__DFLT_index_of__DFLT_st_src_1) = ((FLD (f_srcdst)) + (1));
FLD (in_st_src) = f_srcdst;
}
#endif
if (PROFILE_MODEL_P (current_cpu))
{
FLD (in_abase) = f_abase;
- FLD (in_h_gr_add__VM_index_of_st_src_1) = ((FLD (f_srcdst)) + (1));
+ FLD (in_h_gr_add__DFLT_index_of__DFLT_st_src_1) = ((FLD (f_srcdst)) + (1));
FLD (in_st_src) = f_srcdst;
}
#endif
/* Record the fields for profiling. */
if (PROFILE_MODEL_P (current_cpu))
{
- FLD (in_h_gr_add__VM_index_of_st_src_1) = ((FLD (f_srcdst)) + (1));
+ FLD (in_h_gr_add__DFLT_index_of__DFLT_st_src_1) = ((FLD (f_srcdst)) + (1));
FLD (in_index) = f_index;
FLD (in_st_src) = f_srcdst;
}
if (PROFILE_MODEL_P (current_cpu))
{
FLD (in_abase) = f_abase;
- FLD (in_h_gr_add__VM_index_of_st_src_1) = ((FLD (f_srcdst)) + (1));
+ FLD (in_h_gr_add__DFLT_index_of__DFLT_st_src_1) = ((FLD (f_srcdst)) + (1));
FLD (in_index) = f_index;
FLD (in_st_src) = f_srcdst;
}
/* Record the fields for profiling. */
if (PROFILE_MODEL_P (current_cpu))
{
- FLD (in_h_gr_add__VM_index_of_st_src_1) = ((FLD (f_srcdst)) + (1));
- FLD (in_h_gr_add__VM_index_of_st_src_2) = ((FLD (f_srcdst)) + (2));
+ FLD (in_h_gr_add__DFLT_index_of__DFLT_st_src_1) = ((FLD (f_srcdst)) + (1));
+ FLD (in_h_gr_add__DFLT_index_of__DFLT_st_src_2) = ((FLD (f_srcdst)) + (2));
FLD (in_st_src) = f_srcdst;
}
#endif
if (PROFILE_MODEL_P (current_cpu))
{
FLD (in_abase) = f_abase;
- FLD (in_h_gr_add__VM_index_of_st_src_1) = ((FLD (f_srcdst)) + (1));
- FLD (in_h_gr_add__VM_index_of_st_src_2) = ((FLD (f_srcdst)) + (2));
+ FLD (in_h_gr_add__DFLT_index_of__DFLT_st_src_1) = ((FLD (f_srcdst)) + (1));
+ FLD (in_h_gr_add__DFLT_index_of__DFLT_st_src_2) = ((FLD (f_srcdst)) + (2));
FLD (in_st_src) = f_srcdst;
}
#endif
if (PROFILE_MODEL_P (current_cpu))
{
FLD (in_abase) = f_abase;
- FLD (in_h_gr_add__VM_index_of_st_src_1) = ((FLD (f_srcdst)) + (1));
- FLD (in_h_gr_add__VM_index_of_st_src_2) = ((FLD (f_srcdst)) + (2));
+ FLD (in_h_gr_add__DFLT_index_of__DFLT_st_src_1) = ((FLD (f_srcdst)) + (1));
+ FLD (in_h_gr_add__DFLT_index_of__DFLT_st_src_2) = ((FLD (f_srcdst)) + (2));
FLD (in_st_src) = f_srcdst;
}
#endif
if (PROFILE_MODEL_P (current_cpu))
{
FLD (in_abase) = f_abase;
- FLD (in_h_gr_add__VM_index_of_st_src_1) = ((FLD (f_srcdst)) + (1));
- FLD (in_h_gr_add__VM_index_of_st_src_2) = ((FLD (f_srcdst)) + (2));
+ FLD (in_h_gr_add__DFLT_index_of__DFLT_st_src_1) = ((FLD (f_srcdst)) + (1));
+ FLD (in_h_gr_add__DFLT_index_of__DFLT_st_src_2) = ((FLD (f_srcdst)) + (2));
FLD (in_index) = f_index;
FLD (in_st_src) = f_srcdst;
}
/* Record the fields for profiling. */
if (PROFILE_MODEL_P (current_cpu))
{
- FLD (in_h_gr_add__VM_index_of_st_src_1) = ((FLD (f_srcdst)) + (1));
- FLD (in_h_gr_add__VM_index_of_st_src_2) = ((FLD (f_srcdst)) + (2));
+ FLD (in_h_gr_add__DFLT_index_of__DFLT_st_src_1) = ((FLD (f_srcdst)) + (1));
+ FLD (in_h_gr_add__DFLT_index_of__DFLT_st_src_2) = ((FLD (f_srcdst)) + (2));
FLD (in_st_src) = f_srcdst;
}
#endif
if (PROFILE_MODEL_P (current_cpu))
{
FLD (in_abase) = f_abase;
- FLD (in_h_gr_add__VM_index_of_st_src_1) = ((FLD (f_srcdst)) + (1));
- FLD (in_h_gr_add__VM_index_of_st_src_2) = ((FLD (f_srcdst)) + (2));
+ FLD (in_h_gr_add__DFLT_index_of__DFLT_st_src_1) = ((FLD (f_srcdst)) + (1));
+ FLD (in_h_gr_add__DFLT_index_of__DFLT_st_src_2) = ((FLD (f_srcdst)) + (2));
FLD (in_st_src) = f_srcdst;
}
#endif
/* Record the fields for profiling. */
if (PROFILE_MODEL_P (current_cpu))
{
- FLD (in_h_gr_add__VM_index_of_st_src_1) = ((FLD (f_srcdst)) + (1));
- FLD (in_h_gr_add__VM_index_of_st_src_2) = ((FLD (f_srcdst)) + (2));
+ FLD (in_h_gr_add__DFLT_index_of__DFLT_st_src_1) = ((FLD (f_srcdst)) + (1));
+ FLD (in_h_gr_add__DFLT_index_of__DFLT_st_src_2) = ((FLD (f_srcdst)) + (2));
FLD (in_index) = f_index;
FLD (in_st_src) = f_srcdst;
}
if (PROFILE_MODEL_P (current_cpu))
{
FLD (in_abase) = f_abase;
- FLD (in_h_gr_add__VM_index_of_st_src_1) = ((FLD (f_srcdst)) + (1));
- FLD (in_h_gr_add__VM_index_of_st_src_2) = ((FLD (f_srcdst)) + (2));
+ FLD (in_h_gr_add__DFLT_index_of__DFLT_st_src_1) = ((FLD (f_srcdst)) + (1));
+ FLD (in_h_gr_add__DFLT_index_of__DFLT_st_src_2) = ((FLD (f_srcdst)) + (2));
FLD (in_index) = f_index;
FLD (in_st_src) = f_srcdst;
}
/* Record the fields for profiling. */
if (PROFILE_MODEL_P (current_cpu))
{
- FLD (in_h_gr_add__VM_index_of_st_src_1) = ((FLD (f_srcdst)) + (1));
- FLD (in_h_gr_add__VM_index_of_st_src_2) = ((FLD (f_srcdst)) + (2));
- FLD (in_h_gr_add__VM_index_of_st_src_3) = ((FLD (f_srcdst)) + (3));
+ FLD (in_h_gr_add__DFLT_index_of__DFLT_st_src_1) = ((FLD (f_srcdst)) + (1));
+ FLD (in_h_gr_add__DFLT_index_of__DFLT_st_src_2) = ((FLD (f_srcdst)) + (2));
+ FLD (in_h_gr_add__DFLT_index_of__DFLT_st_src_3) = ((FLD (f_srcdst)) + (3));
FLD (in_st_src) = f_srcdst;
}
#endif
if (PROFILE_MODEL_P (current_cpu))
{
FLD (in_abase) = f_abase;
- FLD (in_h_gr_add__VM_index_of_st_src_1) = ((FLD (f_srcdst)) + (1));
- FLD (in_h_gr_add__VM_index_of_st_src_2) = ((FLD (f_srcdst)) + (2));
- FLD (in_h_gr_add__VM_index_of_st_src_3) = ((FLD (f_srcdst)) + (3));
+ FLD (in_h_gr_add__DFLT_index_of__DFLT_st_src_1) = ((FLD (f_srcdst)) + (1));
+ FLD (in_h_gr_add__DFLT_index_of__DFLT_st_src_2) = ((FLD (f_srcdst)) + (2));
+ FLD (in_h_gr_add__DFLT_index_of__DFLT_st_src_3) = ((FLD (f_srcdst)) + (3));
FLD (in_st_src) = f_srcdst;
}
#endif
if (PROFILE_MODEL_P (current_cpu))
{
FLD (in_abase) = f_abase;
- FLD (in_h_gr_add__VM_index_of_st_src_1) = ((FLD (f_srcdst)) + (1));
- FLD (in_h_gr_add__VM_index_of_st_src_2) = ((FLD (f_srcdst)) + (2));
- FLD (in_h_gr_add__VM_index_of_st_src_3) = ((FLD (f_srcdst)) + (3));
+ FLD (in_h_gr_add__DFLT_index_of__DFLT_st_src_1) = ((FLD (f_srcdst)) + (1));
+ FLD (in_h_gr_add__DFLT_index_of__DFLT_st_src_2) = ((FLD (f_srcdst)) + (2));
+ FLD (in_h_gr_add__DFLT_index_of__DFLT_st_src_3) = ((FLD (f_srcdst)) + (3));
FLD (in_st_src) = f_srcdst;
}
#endif
if (PROFILE_MODEL_P (current_cpu))
{
FLD (in_abase) = f_abase;
- FLD (in_h_gr_add__VM_index_of_st_src_1) = ((FLD (f_srcdst)) + (1));
- FLD (in_h_gr_add__VM_index_of_st_src_2) = ((FLD (f_srcdst)) + (2));
- FLD (in_h_gr_add__VM_index_of_st_src_3) = ((FLD (f_srcdst)) + (3));
+ FLD (in_h_gr_add__DFLT_index_of__DFLT_st_src_1) = ((FLD (f_srcdst)) + (1));
+ FLD (in_h_gr_add__DFLT_index_of__DFLT_st_src_2) = ((FLD (f_srcdst)) + (2));
+ FLD (in_h_gr_add__DFLT_index_of__DFLT_st_src_3) = ((FLD (f_srcdst)) + (3));
FLD (in_index) = f_index;
FLD (in_st_src) = f_srcdst;
}
/* Record the fields for profiling. */
if (PROFILE_MODEL_P (current_cpu))
{
- FLD (in_h_gr_add__VM_index_of_st_src_1) = ((FLD (f_srcdst)) + (1));
- FLD (in_h_gr_add__VM_index_of_st_src_2) = ((FLD (f_srcdst)) + (2));
- FLD (in_h_gr_add__VM_index_of_st_src_3) = ((FLD (f_srcdst)) + (3));
+ FLD (in_h_gr_add__DFLT_index_of__DFLT_st_src_1) = ((FLD (f_srcdst)) + (1));
+ FLD (in_h_gr_add__DFLT_index_of__DFLT_st_src_2) = ((FLD (f_srcdst)) + (2));
+ FLD (in_h_gr_add__DFLT_index_of__DFLT_st_src_3) = ((FLD (f_srcdst)) + (3));
FLD (in_st_src) = f_srcdst;
}
#endif
if (PROFILE_MODEL_P (current_cpu))
{
FLD (in_abase) = f_abase;
- FLD (in_h_gr_add__VM_index_of_st_src_1) = ((FLD (f_srcdst)) + (1));
- FLD (in_h_gr_add__VM_index_of_st_src_2) = ((FLD (f_srcdst)) + (2));
- FLD (in_h_gr_add__VM_index_of_st_src_3) = ((FLD (f_srcdst)) + (3));
+ FLD (in_h_gr_add__DFLT_index_of__DFLT_st_src_1) = ((FLD (f_srcdst)) + (1));
+ FLD (in_h_gr_add__DFLT_index_of__DFLT_st_src_2) = ((FLD (f_srcdst)) + (2));
+ FLD (in_h_gr_add__DFLT_index_of__DFLT_st_src_3) = ((FLD (f_srcdst)) + (3));
FLD (in_st_src) = f_srcdst;
}
#endif
/* Record the fields for profiling. */
if (PROFILE_MODEL_P (current_cpu))
{
- FLD (in_h_gr_add__VM_index_of_st_src_1) = ((FLD (f_srcdst)) + (1));
- FLD (in_h_gr_add__VM_index_of_st_src_2) = ((FLD (f_srcdst)) + (2));
- FLD (in_h_gr_add__VM_index_of_st_src_3) = ((FLD (f_srcdst)) + (3));
+ FLD (in_h_gr_add__DFLT_index_of__DFLT_st_src_1) = ((FLD (f_srcdst)) + (1));
+ FLD (in_h_gr_add__DFLT_index_of__DFLT_st_src_2) = ((FLD (f_srcdst)) + (2));
+ FLD (in_h_gr_add__DFLT_index_of__DFLT_st_src_3) = ((FLD (f_srcdst)) + (3));
FLD (in_index) = f_index;
FLD (in_st_src) = f_srcdst;
}
if (PROFILE_MODEL_P (current_cpu))
{
FLD (in_abase) = f_abase;
- FLD (in_h_gr_add__VM_index_of_st_src_1) = ((FLD (f_srcdst)) + (1));
- FLD (in_h_gr_add__VM_index_of_st_src_2) = ((FLD (f_srcdst)) + (2));
- FLD (in_h_gr_add__VM_index_of_st_src_3) = ((FLD (f_srcdst)) + (3));
+ FLD (in_h_gr_add__DFLT_index_of__DFLT_st_src_1) = ((FLD (f_srcdst)) + (1));
+ FLD (in_h_gr_add__DFLT_index_of__DFLT_st_src_2) = ((FLD (f_srcdst)) + (2));
+ FLD (in_h_gr_add__DFLT_index_of__DFLT_st_src_3) = ((FLD (f_srcdst)) + (3));
FLD (in_index) = f_index;
FLD (in_st_src) = f_srcdst;
}
{
SI opval = TRUNCDISI (SRLDI (tmp_temp, 32));
CPU (h_gr[((FLD (f_srcdst)) + (1))]) = opval;
- TRACE_RESULT (current_cpu, abuf, "gr-add:-VM-index-of-dst-1", 'x', opval);
+ TRACE_RESULT (current_cpu, abuf, "gr-add--DFLT-index-of--DFLT-dst-1", 'x', opval);
}
}
{
SI opval = TRUNCDISI (SRLDI (tmp_temp, 32));
CPU (h_gr[((FLD (f_srcdst)) + (1))]) = opval;
- TRACE_RESULT (current_cpu, abuf, "gr-add:-VM-index-of-dst-1", 'x', opval);
+ TRACE_RESULT (current_cpu, abuf, "gr-add--DFLT-index-of--DFLT-dst-1", 'x', opval);
}
}
{
SI opval = TRUNCDISI (SRLDI (tmp_temp, 32));
CPU (h_gr[((FLD (f_srcdst)) + (1))]) = opval;
- TRACE_RESULT (current_cpu, abuf, "gr-add:-VM-index-of-dst-1", 'x', opval);
+ TRACE_RESULT (current_cpu, abuf, "gr-add--DFLT-index-of--DFLT-dst-1", 'x', opval);
}
}
{
SI opval = TRUNCDISI (SRLDI (tmp_temp, 32));
CPU (h_gr[((FLD (f_srcdst)) + (1))]) = opval;
- TRACE_RESULT (current_cpu, abuf, "gr-add:-VM-index-of-dst-1", 'x', opval);
+ TRACE_RESULT (current_cpu, abuf, "gr-add--DFLT-index-of--DFLT-dst-1", 'x', opval);
}
}
{
SI opval = CPU (h_gr[((FLD (f_src1)) + (1))]);
CPU (h_gr[((FLD (f_srcdst)) + (1))]) = opval;
- TRACE_RESULT (current_cpu, abuf, "gr-add:-VM-index-of-dst-1", 'x', opval);
+ TRACE_RESULT (current_cpu, abuf, "gr-add--DFLT-index-of--DFLT-dst-1", 'x', opval);
}
}
{
SI opval = 0;
CPU (h_gr[((FLD (f_srcdst)) + (1))]) = opval;
- TRACE_RESULT (current_cpu, abuf, "gr-add:-VM-index-of-dst-1", 'x', opval);
+ TRACE_RESULT (current_cpu, abuf, "gr-add--DFLT-index-of--DFLT-dst-1", 'x', opval);
}
}
{
SI opval = CPU (h_gr[((FLD (f_src1)) + (1))]);
CPU (h_gr[((FLD (f_srcdst)) + (1))]) = opval;
- TRACE_RESULT (current_cpu, abuf, "gr-add:-VM-index-of-dst-1", 'x', opval);
+ TRACE_RESULT (current_cpu, abuf, "gr-add--DFLT-index-of--DFLT-dst-1", 'x', opval);
}
{
SI opval = CPU (h_gr[((FLD (f_src1)) + (2))]);
CPU (h_gr[((FLD (f_srcdst)) + (2))]) = opval;
- TRACE_RESULT (current_cpu, abuf, "gr-add:-VM-index-of-dst-2", 'x', opval);
+ TRACE_RESULT (current_cpu, abuf, "gr-add--DFLT-index-of--DFLT-dst-2", 'x', opval);
}
}
{
SI opval = 0;
CPU (h_gr[((FLD (f_srcdst)) + (1))]) = opval;
- TRACE_RESULT (current_cpu, abuf, "gr-add:-VM-index-of-dst-1", 'x', opval);
+ TRACE_RESULT (current_cpu, abuf, "gr-add--DFLT-index-of--DFLT-dst-1", 'x', opval);
}
{
SI opval = 0;
CPU (h_gr[((FLD (f_srcdst)) + (2))]) = opval;
- TRACE_RESULT (current_cpu, abuf, "gr-add:-VM-index-of-dst-2", 'x', opval);
+ TRACE_RESULT (current_cpu, abuf, "gr-add--DFLT-index-of--DFLT-dst-2", 'x', opval);
}
}
{
SI opval = CPU (h_gr[((FLD (f_src1)) + (1))]);
CPU (h_gr[((FLD (f_srcdst)) + (1))]) = opval;
- TRACE_RESULT (current_cpu, abuf, "gr-add:-VM-index-of-dst-1", 'x', opval);
+ TRACE_RESULT (current_cpu, abuf, "gr-add--DFLT-index-of--DFLT-dst-1", 'x', opval);
}
{
SI opval = CPU (h_gr[((FLD (f_src1)) + (2))]);
CPU (h_gr[((FLD (f_srcdst)) + (2))]) = opval;
- TRACE_RESULT (current_cpu, abuf, "gr-add:-VM-index-of-dst-2", 'x', opval);
+ TRACE_RESULT (current_cpu, abuf, "gr-add--DFLT-index-of--DFLT-dst-2", 'x', opval);
}
{
SI opval = CPU (h_gr[((FLD (f_src1)) + (3))]);
CPU (h_gr[((FLD (f_srcdst)) + (3))]) = opval;
- TRACE_RESULT (current_cpu, abuf, "gr-add:-VM-index-of-dst-3", 'x', opval);
+ TRACE_RESULT (current_cpu, abuf, "gr-add--DFLT-index-of--DFLT-dst-3", 'x', opval);
}
}
{
SI opval = 0;
CPU (h_gr[((FLD (f_srcdst)) + (1))]) = opval;
- TRACE_RESULT (current_cpu, abuf, "gr-add:-VM-index-of-dst-1", 'x', opval);
+ TRACE_RESULT (current_cpu, abuf, "gr-add--DFLT-index-of--DFLT-dst-1", 'x', opval);
}
{
SI opval = 0;
CPU (h_gr[((FLD (f_srcdst)) + (2))]) = opval;
- TRACE_RESULT (current_cpu, abuf, "gr-add:-VM-index-of-dst-2", 'x', opval);
+ TRACE_RESULT (current_cpu, abuf, "gr-add--DFLT-index-of--DFLT-dst-2", 'x', opval);
}
{
SI opval = 0;
CPU (h_gr[((FLD (f_srcdst)) + (3))]) = opval;
- TRACE_RESULT (current_cpu, abuf, "gr-add:-VM-index-of-dst-3", 'x', opval);
+ TRACE_RESULT (current_cpu, abuf, "gr-add--DFLT-index-of--DFLT-dst-3", 'x', opval);
}
}
{
SI opval = GETMEMSI (current_cpu, pc, ADDSI (tmp_temp, 4));
CPU (h_gr[((FLD (f_srcdst)) + (1))]) = opval;
- TRACE_RESULT (current_cpu, abuf, "gr-add:-VM-index-of-dst-1", 'x', opval);
+ TRACE_RESULT (current_cpu, abuf, "gr-add--DFLT-index-of--DFLT-dst-1", 'x', opval);
}
}
{
SI opval = GETMEMSI (current_cpu, pc, ADDSI (tmp_temp, 4));
CPU (h_gr[((FLD (f_srcdst)) + (1))]) = opval;
- TRACE_RESULT (current_cpu, abuf, "gr-add:-VM-index-of-dst-1", 'x', opval);
+ TRACE_RESULT (current_cpu, abuf, "gr-add--DFLT-index-of--DFLT-dst-1", 'x', opval);
}
}
{
SI opval = GETMEMSI (current_cpu, pc, ADDSI (tmp_temp, 4));
CPU (h_gr[((FLD (f_srcdst)) + (1))]) = opval;
- TRACE_RESULT (current_cpu, abuf, "gr-add:-VM-index-of-dst-1", 'x', opval);
+ TRACE_RESULT (current_cpu, abuf, "gr-add--DFLT-index-of--DFLT-dst-1", 'x', opval);
}
}
{
SI opval = GETMEMSI (current_cpu, pc, ADDSI (tmp_temp, 4));
CPU (h_gr[((FLD (f_srcdst)) + (1))]) = opval;
- TRACE_RESULT (current_cpu, abuf, "gr-add:-VM-index-of-dst-1", 'x', opval);
+ TRACE_RESULT (current_cpu, abuf, "gr-add--DFLT-index-of--DFLT-dst-1", 'x', opval);
}
}
{
SI opval = GETMEMSI (current_cpu, pc, ADDSI (tmp_temp, 4));
CPU (h_gr[((FLD (f_srcdst)) + (1))]) = opval;
- TRACE_RESULT (current_cpu, abuf, "gr-add:-VM-index-of-dst-1", 'x', opval);
+ TRACE_RESULT (current_cpu, abuf, "gr-add--DFLT-index-of--DFLT-dst-1", 'x', opval);
}
}
{
SI opval = GETMEMSI (current_cpu, pc, ADDSI (tmp_temp, 4));
CPU (h_gr[((FLD (f_srcdst)) + (1))]) = opval;
- TRACE_RESULT (current_cpu, abuf, "gr-add:-VM-index-of-dst-1", 'x', opval);
+ TRACE_RESULT (current_cpu, abuf, "gr-add--DFLT-index-of--DFLT-dst-1", 'x', opval);
}
}
{
SI opval = GETMEMSI (current_cpu, pc, ADDSI (tmp_temp, 4));
CPU (h_gr[((FLD (f_srcdst)) + (1))]) = opval;
- TRACE_RESULT (current_cpu, abuf, "gr-add:-VM-index-of-dst-1", 'x', opval);
+ TRACE_RESULT (current_cpu, abuf, "gr-add--DFLT-index-of--DFLT-dst-1", 'x', opval);
}
}
{
SI opval = GETMEMSI (current_cpu, pc, ADDSI (tmp_temp, 4));
CPU (h_gr[((FLD (f_srcdst)) + (1))]) = opval;
- TRACE_RESULT (current_cpu, abuf, "gr-add:-VM-index-of-dst-1", 'x', opval);
+ TRACE_RESULT (current_cpu, abuf, "gr-add--DFLT-index-of--DFLT-dst-1", 'x', opval);
}
}
{
SI opval = GETMEMSI (current_cpu, pc, ADDSI (tmp_temp, 4));
CPU (h_gr[((FLD (f_srcdst)) + (1))]) = opval;
- TRACE_RESULT (current_cpu, abuf, "gr-add:-VM-index-of-dst-1", 'x', opval);
+ TRACE_RESULT (current_cpu, abuf, "gr-add--DFLT-index-of--DFLT-dst-1", 'x', opval);
}
{
SI opval = GETMEMSI (current_cpu, pc, ADDSI (tmp_temp, 8));
CPU (h_gr[((FLD (f_srcdst)) + (2))]) = opval;
- TRACE_RESULT (current_cpu, abuf, "gr-add:-VM-index-of-dst-2", 'x', opval);
+ TRACE_RESULT (current_cpu, abuf, "gr-add--DFLT-index-of--DFLT-dst-2", 'x', opval);
}
}
{
SI opval = GETMEMSI (current_cpu, pc, ADDSI (tmp_temp, 4));
CPU (h_gr[((FLD (f_srcdst)) + (1))]) = opval;
- TRACE_RESULT (current_cpu, abuf, "gr-add:-VM-index-of-dst-1", 'x', opval);
+ TRACE_RESULT (current_cpu, abuf, "gr-add--DFLT-index-of--DFLT-dst-1", 'x', opval);
}
{
SI opval = GETMEMSI (current_cpu, pc, ADDSI (tmp_temp, 8));
CPU (h_gr[((FLD (f_srcdst)) + (2))]) = opval;
- TRACE_RESULT (current_cpu, abuf, "gr-add:-VM-index-of-dst-2", 'x', opval);
+ TRACE_RESULT (current_cpu, abuf, "gr-add--DFLT-index-of--DFLT-dst-2", 'x', opval);
}
}
{
SI opval = GETMEMSI (current_cpu, pc, ADDSI (tmp_temp, 4));
CPU (h_gr[((FLD (f_srcdst)) + (1))]) = opval;
- TRACE_RESULT (current_cpu, abuf, "gr-add:-VM-index-of-dst-1", 'x', opval);
+ TRACE_RESULT (current_cpu, abuf, "gr-add--DFLT-index-of--DFLT-dst-1", 'x', opval);
}
{
SI opval = GETMEMSI (current_cpu, pc, ADDSI (tmp_temp, 8));
CPU (h_gr[((FLD (f_srcdst)) + (2))]) = opval;
- TRACE_RESULT (current_cpu, abuf, "gr-add:-VM-index-of-dst-2", 'x', opval);
+ TRACE_RESULT (current_cpu, abuf, "gr-add--DFLT-index-of--DFLT-dst-2", 'x', opval);
}
}
{
SI opval = GETMEMSI (current_cpu, pc, ADDSI (tmp_temp, 4));
CPU (h_gr[((FLD (f_srcdst)) + (1))]) = opval;
- TRACE_RESULT (current_cpu, abuf, "gr-add:-VM-index-of-dst-1", 'x', opval);
+ TRACE_RESULT (current_cpu, abuf, "gr-add--DFLT-index-of--DFLT-dst-1", 'x', opval);
}
{
SI opval = GETMEMSI (current_cpu, pc, ADDSI (tmp_temp, 8));
CPU (h_gr[((FLD (f_srcdst)) + (2))]) = opval;
- TRACE_RESULT (current_cpu, abuf, "gr-add:-VM-index-of-dst-2", 'x', opval);
+ TRACE_RESULT (current_cpu, abuf, "gr-add--DFLT-index-of--DFLT-dst-2", 'x', opval);
}
}
{
SI opval = GETMEMSI (current_cpu, pc, ADDSI (tmp_temp, 4));
CPU (h_gr[((FLD (f_srcdst)) + (1))]) = opval;
- TRACE_RESULT (current_cpu, abuf, "gr-add:-VM-index-of-dst-1", 'x', opval);
+ TRACE_RESULT (current_cpu, abuf, "gr-add--DFLT-index-of--DFLT-dst-1", 'x', opval);
}
{
SI opval = GETMEMSI (current_cpu, pc, ADDSI (tmp_temp, 8));
CPU (h_gr[((FLD (f_srcdst)) + (2))]) = opval;
- TRACE_RESULT (current_cpu, abuf, "gr-add:-VM-index-of-dst-2", 'x', opval);
+ TRACE_RESULT (current_cpu, abuf, "gr-add--DFLT-index-of--DFLT-dst-2", 'x', opval);
}
}
{
SI opval = GETMEMSI (current_cpu, pc, ADDSI (tmp_temp, 4));
CPU (h_gr[((FLD (f_srcdst)) + (1))]) = opval;
- TRACE_RESULT (current_cpu, abuf, "gr-add:-VM-index-of-dst-1", 'x', opval);
+ TRACE_RESULT (current_cpu, abuf, "gr-add--DFLT-index-of--DFLT-dst-1", 'x', opval);
}
{
SI opval = GETMEMSI (current_cpu, pc, ADDSI (tmp_temp, 8));
CPU (h_gr[((FLD (f_srcdst)) + (2))]) = opval;
- TRACE_RESULT (current_cpu, abuf, "gr-add:-VM-index-of-dst-2", 'x', opval);
+ TRACE_RESULT (current_cpu, abuf, "gr-add--DFLT-index-of--DFLT-dst-2", 'x', opval);
}
}
{
SI opval = GETMEMSI (current_cpu, pc, ADDSI (tmp_temp, 4));
CPU (h_gr[((FLD (f_srcdst)) + (1))]) = opval;
- TRACE_RESULT (current_cpu, abuf, "gr-add:-VM-index-of-dst-1", 'x', opval);
+ TRACE_RESULT (current_cpu, abuf, "gr-add--DFLT-index-of--DFLT-dst-1", 'x', opval);
}
{
SI opval = GETMEMSI (current_cpu, pc, ADDSI (tmp_temp, 8));
CPU (h_gr[((FLD (f_srcdst)) + (2))]) = opval;
- TRACE_RESULT (current_cpu, abuf, "gr-add:-VM-index-of-dst-2", 'x', opval);
+ TRACE_RESULT (current_cpu, abuf, "gr-add--DFLT-index-of--DFLT-dst-2", 'x', opval);
}
}
{
SI opval = GETMEMSI (current_cpu, pc, ADDSI (tmp_temp, 4));
CPU (h_gr[((FLD (f_srcdst)) + (1))]) = opval;
- TRACE_RESULT (current_cpu, abuf, "gr-add:-VM-index-of-dst-1", 'x', opval);
+ TRACE_RESULT (current_cpu, abuf, "gr-add--DFLT-index-of--DFLT-dst-1", 'x', opval);
}
{
SI opval = GETMEMSI (current_cpu, pc, ADDSI (tmp_temp, 8));
CPU (h_gr[((FLD (f_srcdst)) + (2))]) = opval;
- TRACE_RESULT (current_cpu, abuf, "gr-add:-VM-index-of-dst-2", 'x', opval);
+ TRACE_RESULT (current_cpu, abuf, "gr-add--DFLT-index-of--DFLT-dst-2", 'x', opval);
}
}
{
SI opval = GETMEMSI (current_cpu, pc, ADDSI (tmp_temp, 4));
CPU (h_gr[((FLD (f_srcdst)) + (1))]) = opval;
- TRACE_RESULT (current_cpu, abuf, "gr-add:-VM-index-of-dst-1", 'x', opval);
+ TRACE_RESULT (current_cpu, abuf, "gr-add--DFLT-index-of--DFLT-dst-1", 'x', opval);
}
{
SI opval = GETMEMSI (current_cpu, pc, ADDSI (tmp_temp, 8));
CPU (h_gr[((FLD (f_srcdst)) + (2))]) = opval;
- TRACE_RESULT (current_cpu, abuf, "gr-add:-VM-index-of-dst-2", 'x', opval);
+ TRACE_RESULT (current_cpu, abuf, "gr-add--DFLT-index-of--DFLT-dst-2", 'x', opval);
}
{
SI opval = GETMEMSI (current_cpu, pc, ADDSI (tmp_temp, 12));
CPU (h_gr[((FLD (f_srcdst)) + (3))]) = opval;
- TRACE_RESULT (current_cpu, abuf, "gr-add:-VM-index-of-dst-3", 'x', opval);
+ TRACE_RESULT (current_cpu, abuf, "gr-add--DFLT-index-of--DFLT-dst-3", 'x', opval);
}
}
{
SI opval = GETMEMSI (current_cpu, pc, ADDSI (tmp_temp, 4));
CPU (h_gr[((FLD (f_srcdst)) + (1))]) = opval;
- TRACE_RESULT (current_cpu, abuf, "gr-add:-VM-index-of-dst-1", 'x', opval);
+ TRACE_RESULT (current_cpu, abuf, "gr-add--DFLT-index-of--DFLT-dst-1", 'x', opval);
}
{
SI opval = GETMEMSI (current_cpu, pc, ADDSI (tmp_temp, 8));
CPU (h_gr[((FLD (f_srcdst)) + (2))]) = opval;
- TRACE_RESULT (current_cpu, abuf, "gr-add:-VM-index-of-dst-2", 'x', opval);
+ TRACE_RESULT (current_cpu, abuf, "gr-add--DFLT-index-of--DFLT-dst-2", 'x', opval);
}
{
SI opval = GETMEMSI (current_cpu, pc, ADDSI (tmp_temp, 12));
CPU (h_gr[((FLD (f_srcdst)) + (3))]) = opval;
- TRACE_RESULT (current_cpu, abuf, "gr-add:-VM-index-of-dst-3", 'x', opval);
+ TRACE_RESULT (current_cpu, abuf, "gr-add--DFLT-index-of--DFLT-dst-3", 'x', opval);
}
}
{
SI opval = GETMEMSI (current_cpu, pc, ADDSI (tmp_temp, 4));
CPU (h_gr[((FLD (f_srcdst)) + (1))]) = opval;
- TRACE_RESULT (current_cpu, abuf, "gr-add:-VM-index-of-dst-1", 'x', opval);
+ TRACE_RESULT (current_cpu, abuf, "gr-add--DFLT-index-of--DFLT-dst-1", 'x', opval);
}
{
SI opval = GETMEMSI (current_cpu, pc, ADDSI (tmp_temp, 8));
CPU (h_gr[((FLD (f_srcdst)) + (2))]) = opval;
- TRACE_RESULT (current_cpu, abuf, "gr-add:-VM-index-of-dst-2", 'x', opval);
+ TRACE_RESULT (current_cpu, abuf, "gr-add--DFLT-index-of--DFLT-dst-2", 'x', opval);
}
{
SI opval = GETMEMSI (current_cpu, pc, ADDSI (tmp_temp, 12));
CPU (h_gr[((FLD (f_srcdst)) + (3))]) = opval;
- TRACE_RESULT (current_cpu, abuf, "gr-add:-VM-index-of-dst-3", 'x', opval);
+ TRACE_RESULT (current_cpu, abuf, "gr-add--DFLT-index-of--DFLT-dst-3", 'x', opval);
}
}
{
SI opval = GETMEMSI (current_cpu, pc, ADDSI (tmp_temp, 4));
CPU (h_gr[((FLD (f_srcdst)) + (1))]) = opval;
- TRACE_RESULT (current_cpu, abuf, "gr-add:-VM-index-of-dst-1", 'x', opval);
+ TRACE_RESULT (current_cpu, abuf, "gr-add--DFLT-index-of--DFLT-dst-1", 'x', opval);
}
{
SI opval = GETMEMSI (current_cpu, pc, ADDSI (tmp_temp, 8));
CPU (h_gr[((FLD (f_srcdst)) + (2))]) = opval;
- TRACE_RESULT (current_cpu, abuf, "gr-add:-VM-index-of-dst-2", 'x', opval);
+ TRACE_RESULT (current_cpu, abuf, "gr-add--DFLT-index-of--DFLT-dst-2", 'x', opval);
}
{
SI opval = GETMEMSI (current_cpu, pc, ADDSI (tmp_temp, 12));
CPU (h_gr[((FLD (f_srcdst)) + (3))]) = opval;
- TRACE_RESULT (current_cpu, abuf, "gr-add:-VM-index-of-dst-3", 'x', opval);
+ TRACE_RESULT (current_cpu, abuf, "gr-add--DFLT-index-of--DFLT-dst-3", 'x', opval);
}
}
{
SI opval = GETMEMSI (current_cpu, pc, ADDSI (tmp_temp, 4));
CPU (h_gr[((FLD (f_srcdst)) + (1))]) = opval;
- TRACE_RESULT (current_cpu, abuf, "gr-add:-VM-index-of-dst-1", 'x', opval);
+ TRACE_RESULT (current_cpu, abuf, "gr-add--DFLT-index-of--DFLT-dst-1", 'x', opval);
}
{
SI opval = GETMEMSI (current_cpu, pc, ADDSI (tmp_temp, 8));
CPU (h_gr[((FLD (f_srcdst)) + (2))]) = opval;
- TRACE_RESULT (current_cpu, abuf, "gr-add:-VM-index-of-dst-2", 'x', opval);
+ TRACE_RESULT (current_cpu, abuf, "gr-add--DFLT-index-of--DFLT-dst-2", 'x', opval);
}
{
SI opval = GETMEMSI (current_cpu, pc, ADDSI (tmp_temp, 12));
CPU (h_gr[((FLD (f_srcdst)) + (3))]) = opval;
- TRACE_RESULT (current_cpu, abuf, "gr-add:-VM-index-of-dst-3", 'x', opval);
+ TRACE_RESULT (current_cpu, abuf, "gr-add--DFLT-index-of--DFLT-dst-3", 'x', opval);
}
}
{
SI opval = GETMEMSI (current_cpu, pc, ADDSI (tmp_temp, 4));
CPU (h_gr[((FLD (f_srcdst)) + (1))]) = opval;
- TRACE_RESULT (current_cpu, abuf, "gr-add:-VM-index-of-dst-1", 'x', opval);
+ TRACE_RESULT (current_cpu, abuf, "gr-add--DFLT-index-of--DFLT-dst-1", 'x', opval);
}
{
SI opval = GETMEMSI (current_cpu, pc, ADDSI (tmp_temp, 8));
CPU (h_gr[((FLD (f_srcdst)) + (2))]) = opval;
- TRACE_RESULT (current_cpu, abuf, "gr-add:-VM-index-of-dst-2", 'x', opval);
+ TRACE_RESULT (current_cpu, abuf, "gr-add--DFLT-index-of--DFLT-dst-2", 'x', opval);
}
{
SI opval = GETMEMSI (current_cpu, pc, ADDSI (tmp_temp, 12));
CPU (h_gr[((FLD (f_srcdst)) + (3))]) = opval;
- TRACE_RESULT (current_cpu, abuf, "gr-add:-VM-index-of-dst-3", 'x', opval);
+ TRACE_RESULT (current_cpu, abuf, "gr-add--DFLT-index-of--DFLT-dst-3", 'x', opval);
}
}
{
SI opval = GETMEMSI (current_cpu, pc, ADDSI (tmp_temp, 4));
CPU (h_gr[((FLD (f_srcdst)) + (1))]) = opval;
- TRACE_RESULT (current_cpu, abuf, "gr-add:-VM-index-of-dst-1", 'x', opval);
+ TRACE_RESULT (current_cpu, abuf, "gr-add--DFLT-index-of--DFLT-dst-1", 'x', opval);
}
{
SI opval = GETMEMSI (current_cpu, pc, ADDSI (tmp_temp, 8));
CPU (h_gr[((FLD (f_srcdst)) + (2))]) = opval;
- TRACE_RESULT (current_cpu, abuf, "gr-add:-VM-index-of-dst-2", 'x', opval);
+ TRACE_RESULT (current_cpu, abuf, "gr-add--DFLT-index-of--DFLT-dst-2", 'x', opval);
}
{
SI opval = GETMEMSI (current_cpu, pc, ADDSI (tmp_temp, 12));
CPU (h_gr[((FLD (f_srcdst)) + (3))]) = opval;
- TRACE_RESULT (current_cpu, abuf, "gr-add:-VM-index-of-dst-3", 'x', opval);
+ TRACE_RESULT (current_cpu, abuf, "gr-add--DFLT-index-of--DFLT-dst-3", 'x', opval);
}
}
{
SI opval = GETMEMSI (current_cpu, pc, ADDSI (tmp_temp, 4));
CPU (h_gr[((FLD (f_srcdst)) + (1))]) = opval;
- TRACE_RESULT (current_cpu, abuf, "gr-add:-VM-index-of-dst-1", 'x', opval);
+ TRACE_RESULT (current_cpu, abuf, "gr-add--DFLT-index-of--DFLT-dst-1", 'x', opval);
}
{
SI opval = GETMEMSI (current_cpu, pc, ADDSI (tmp_temp, 8));
CPU (h_gr[((FLD (f_srcdst)) + (2))]) = opval;
- TRACE_RESULT (current_cpu, abuf, "gr-add:-VM-index-of-dst-2", 'x', opval);
+ TRACE_RESULT (current_cpu, abuf, "gr-add--DFLT-index-of--DFLT-dst-2", 'x', opval);
}
{
SI opval = GETMEMSI (current_cpu, pc, ADDSI (tmp_temp, 12));
CPU (h_gr[((FLD (f_srcdst)) + (3))]) = opval;
- TRACE_RESULT (current_cpu, abuf, "gr-add:-VM-index-of-dst-3", 'x', opval);
+ TRACE_RESULT (current_cpu, abuf, "gr-add--DFLT-index-of--DFLT-dst-3", 'x', opval);
}
}
{
SI opval = TRUNCDISI (SRLDI (tmp_temp, 32));
CPU (h_gr[((FLD (f_srcdst)) + (1))]) = opval;
- TRACE_RESULT (current_cpu, abuf, "gr-add:-VM-index-of-dst-1", 'x', opval);
+ TRACE_RESULT (current_cpu, abuf, "gr-add--DFLT-index-of--DFLT-dst-1", 'x', opval);
}
}
{
SI opval = TRUNCDISI (SRLDI (tmp_temp, 32));
CPU (h_gr[((FLD (f_srcdst)) + (1))]) = opval;
- TRACE_RESULT (current_cpu, abuf, "gr-add:-VM-index-of-dst-1", 'x', opval);
+ TRACE_RESULT (current_cpu, abuf, "gr-add--DFLT-index-of--DFLT-dst-1", 'x', opval);
}
}
{
SI opval = TRUNCDISI (SRLDI (tmp_temp, 32));
CPU (h_gr[((FLD (f_srcdst)) + (1))]) = opval;
- TRACE_RESULT (current_cpu, abuf, "gr-add:-VM-index-of-dst-1", 'x', opval);
+ TRACE_RESULT (current_cpu, abuf, "gr-add--DFLT-index-of--DFLT-dst-1", 'x', opval);
}
}
{
SI opval = TRUNCDISI (SRLDI (tmp_temp, 32));
CPU (h_gr[((FLD (f_srcdst)) + (1))]) = opval;
- TRACE_RESULT (current_cpu, abuf, "gr-add:-VM-index-of-dst-1", 'x', opval);
+ TRACE_RESULT (current_cpu, abuf, "gr-add--DFLT-index-of--DFLT-dst-1", 'x', opval);
}
}
{
SI opval = CPU (h_gr[((FLD (f_src1)) + (1))]);
CPU (h_gr[((FLD (f_srcdst)) + (1))]) = opval;
- TRACE_RESULT (current_cpu, abuf, "gr-add:-VM-index-of-dst-1", 'x', opval);
+ TRACE_RESULT (current_cpu, abuf, "gr-add--DFLT-index-of--DFLT-dst-1", 'x', opval);
}
}
{
SI opval = 0;
CPU (h_gr[((FLD (f_srcdst)) + (1))]) = opval;
- TRACE_RESULT (current_cpu, abuf, "gr-add:-VM-index-of-dst-1", 'x', opval);
+ TRACE_RESULT (current_cpu, abuf, "gr-add--DFLT-index-of--DFLT-dst-1", 'x', opval);
}
}
{
SI opval = CPU (h_gr[((FLD (f_src1)) + (1))]);
CPU (h_gr[((FLD (f_srcdst)) + (1))]) = opval;
- TRACE_RESULT (current_cpu, abuf, "gr-add:-VM-index-of-dst-1", 'x', opval);
+ TRACE_RESULT (current_cpu, abuf, "gr-add--DFLT-index-of--DFLT-dst-1", 'x', opval);
}
{
SI opval = CPU (h_gr[((FLD (f_src1)) + (2))]);
CPU (h_gr[((FLD (f_srcdst)) + (2))]) = opval;
- TRACE_RESULT (current_cpu, abuf, "gr-add:-VM-index-of-dst-2", 'x', opval);
+ TRACE_RESULT (current_cpu, abuf, "gr-add--DFLT-index-of--DFLT-dst-2", 'x', opval);
}
}
{
SI opval = 0;
CPU (h_gr[((FLD (f_srcdst)) + (1))]) = opval;
- TRACE_RESULT (current_cpu, abuf, "gr-add:-VM-index-of-dst-1", 'x', opval);
+ TRACE_RESULT (current_cpu, abuf, "gr-add--DFLT-index-of--DFLT-dst-1", 'x', opval);
}
{
SI opval = 0;
CPU (h_gr[((FLD (f_srcdst)) + (2))]) = opval;
- TRACE_RESULT (current_cpu, abuf, "gr-add:-VM-index-of-dst-2", 'x', opval);
+ TRACE_RESULT (current_cpu, abuf, "gr-add--DFLT-index-of--DFLT-dst-2", 'x', opval);
}
}
{
SI opval = CPU (h_gr[((FLD (f_src1)) + (1))]);
CPU (h_gr[((FLD (f_srcdst)) + (1))]) = opval;
- TRACE_RESULT (current_cpu, abuf, "gr-add:-VM-index-of-dst-1", 'x', opval);
+ TRACE_RESULT (current_cpu, abuf, "gr-add--DFLT-index-of--DFLT-dst-1", 'x', opval);
}
{
SI opval = CPU (h_gr[((FLD (f_src1)) + (2))]);
CPU (h_gr[((FLD (f_srcdst)) + (2))]) = opval;
- TRACE_RESULT (current_cpu, abuf, "gr-add:-VM-index-of-dst-2", 'x', opval);
+ TRACE_RESULT (current_cpu, abuf, "gr-add--DFLT-index-of--DFLT-dst-2", 'x', opval);
}
{
SI opval = CPU (h_gr[((FLD (f_src1)) + (3))]);
CPU (h_gr[((FLD (f_srcdst)) + (3))]) = opval;
- TRACE_RESULT (current_cpu, abuf, "gr-add:-VM-index-of-dst-3", 'x', opval);
+ TRACE_RESULT (current_cpu, abuf, "gr-add--DFLT-index-of--DFLT-dst-3", 'x', opval);
}
}
{
SI opval = 0;
CPU (h_gr[((FLD (f_srcdst)) + (1))]) = opval;
- TRACE_RESULT (current_cpu, abuf, "gr-add:-VM-index-of-dst-1", 'x', opval);
+ TRACE_RESULT (current_cpu, abuf, "gr-add--DFLT-index-of--DFLT-dst-1", 'x', opval);
}
{
SI opval = 0;
CPU (h_gr[((FLD (f_srcdst)) + (2))]) = opval;
- TRACE_RESULT (current_cpu, abuf, "gr-add:-VM-index-of-dst-2", 'x', opval);
+ TRACE_RESULT (current_cpu, abuf, "gr-add--DFLT-index-of--DFLT-dst-2", 'x', opval);
}
{
SI opval = 0;
CPU (h_gr[((FLD (f_srcdst)) + (3))]) = opval;
- TRACE_RESULT (current_cpu, abuf, "gr-add:-VM-index-of-dst-3", 'x', opval);
+ TRACE_RESULT (current_cpu, abuf, "gr-add--DFLT-index-of--DFLT-dst-3", 'x', opval);
}
}
{
SI opval = GETMEMSI (current_cpu, pc, ADDSI (tmp_temp, 4));
CPU (h_gr[((FLD (f_srcdst)) + (1))]) = opval;
- TRACE_RESULT (current_cpu, abuf, "gr-add:-VM-index-of-dst-1", 'x', opval);
+ TRACE_RESULT (current_cpu, abuf, "gr-add--DFLT-index-of--DFLT-dst-1", 'x', opval);
}
}
{
SI opval = GETMEMSI (current_cpu, pc, ADDSI (tmp_temp, 4));
CPU (h_gr[((FLD (f_srcdst)) + (1))]) = opval;
- TRACE_RESULT (current_cpu, abuf, "gr-add:-VM-index-of-dst-1", 'x', opval);
+ TRACE_RESULT (current_cpu, abuf, "gr-add--DFLT-index-of--DFLT-dst-1", 'x', opval);
}
}
{
SI opval = GETMEMSI (current_cpu, pc, ADDSI (tmp_temp, 4));
CPU (h_gr[((FLD (f_srcdst)) + (1))]) = opval;
- TRACE_RESULT (current_cpu, abuf, "gr-add:-VM-index-of-dst-1", 'x', opval);
+ TRACE_RESULT (current_cpu, abuf, "gr-add--DFLT-index-of--DFLT-dst-1", 'x', opval);
}
}
{
SI opval = GETMEMSI (current_cpu, pc, ADDSI (tmp_temp, 4));
CPU (h_gr[((FLD (f_srcdst)) + (1))]) = opval;
- TRACE_RESULT (current_cpu, abuf, "gr-add:-VM-index-of-dst-1", 'x', opval);
+ TRACE_RESULT (current_cpu, abuf, "gr-add--DFLT-index-of--DFLT-dst-1", 'x', opval);
}
}
{
SI opval = GETMEMSI (current_cpu, pc, ADDSI (tmp_temp, 4));
CPU (h_gr[((FLD (f_srcdst)) + (1))]) = opval;
- TRACE_RESULT (current_cpu, abuf, "gr-add:-VM-index-of-dst-1", 'x', opval);
+ TRACE_RESULT (current_cpu, abuf, "gr-add--DFLT-index-of--DFLT-dst-1", 'x', opval);
}
}
{
SI opval = GETMEMSI (current_cpu, pc, ADDSI (tmp_temp, 4));
CPU (h_gr[((FLD (f_srcdst)) + (1))]) = opval;
- TRACE_RESULT (current_cpu, abuf, "gr-add:-VM-index-of-dst-1", 'x', opval);
+ TRACE_RESULT (current_cpu, abuf, "gr-add--DFLT-index-of--DFLT-dst-1", 'x', opval);
}
}
{
SI opval = GETMEMSI (current_cpu, pc, ADDSI (tmp_temp, 4));
CPU (h_gr[((FLD (f_srcdst)) + (1))]) = opval;
- TRACE_RESULT (current_cpu, abuf, "gr-add:-VM-index-of-dst-1", 'x', opval);
+ TRACE_RESULT (current_cpu, abuf, "gr-add--DFLT-index-of--DFLT-dst-1", 'x', opval);
}
}
{
SI opval = GETMEMSI (current_cpu, pc, ADDSI (tmp_temp, 4));
CPU (h_gr[((FLD (f_srcdst)) + (1))]) = opval;
- TRACE_RESULT (current_cpu, abuf, "gr-add:-VM-index-of-dst-1", 'x', opval);
+ TRACE_RESULT (current_cpu, abuf, "gr-add--DFLT-index-of--DFLT-dst-1", 'x', opval);
}
}
{
SI opval = GETMEMSI (current_cpu, pc, ADDSI (tmp_temp, 4));
CPU (h_gr[((FLD (f_srcdst)) + (1))]) = opval;
- TRACE_RESULT (current_cpu, abuf, "gr-add:-VM-index-of-dst-1", 'x', opval);
+ TRACE_RESULT (current_cpu, abuf, "gr-add--DFLT-index-of--DFLT-dst-1", 'x', opval);
}
{
SI opval = GETMEMSI (current_cpu, pc, ADDSI (tmp_temp, 8));
CPU (h_gr[((FLD (f_srcdst)) + (2))]) = opval;
- TRACE_RESULT (current_cpu, abuf, "gr-add:-VM-index-of-dst-2", 'x', opval);
+ TRACE_RESULT (current_cpu, abuf, "gr-add--DFLT-index-of--DFLT-dst-2", 'x', opval);
}
}
{
SI opval = GETMEMSI (current_cpu, pc, ADDSI (tmp_temp, 4));
CPU (h_gr[((FLD (f_srcdst)) + (1))]) = opval;
- TRACE_RESULT (current_cpu, abuf, "gr-add:-VM-index-of-dst-1", 'x', opval);
+ TRACE_RESULT (current_cpu, abuf, "gr-add--DFLT-index-of--DFLT-dst-1", 'x', opval);
}
{
SI opval = GETMEMSI (current_cpu, pc, ADDSI (tmp_temp, 8));
CPU (h_gr[((FLD (f_srcdst)) + (2))]) = opval;
- TRACE_RESULT (current_cpu, abuf, "gr-add:-VM-index-of-dst-2", 'x', opval);
+ TRACE_RESULT (current_cpu, abuf, "gr-add--DFLT-index-of--DFLT-dst-2", 'x', opval);
}
}
{
SI opval = GETMEMSI (current_cpu, pc, ADDSI (tmp_temp, 4));
CPU (h_gr[((FLD (f_srcdst)) + (1))]) = opval;
- TRACE_RESULT (current_cpu, abuf, "gr-add:-VM-index-of-dst-1", 'x', opval);
+ TRACE_RESULT (current_cpu, abuf, "gr-add--DFLT-index-of--DFLT-dst-1", 'x', opval);
}
{
SI opval = GETMEMSI (current_cpu, pc, ADDSI (tmp_temp, 8));
CPU (h_gr[((FLD (f_srcdst)) + (2))]) = opval;
- TRACE_RESULT (current_cpu, abuf, "gr-add:-VM-index-of-dst-2", 'x', opval);
+ TRACE_RESULT (current_cpu, abuf, "gr-add--DFLT-index-of--DFLT-dst-2", 'x', opval);
}
}
{
SI opval = GETMEMSI (current_cpu, pc, ADDSI (tmp_temp, 4));
CPU (h_gr[((FLD (f_srcdst)) + (1))]) = opval;
- TRACE_RESULT (current_cpu, abuf, "gr-add:-VM-index-of-dst-1", 'x', opval);
+ TRACE_RESULT (current_cpu, abuf, "gr-add--DFLT-index-of--DFLT-dst-1", 'x', opval);
}
{
SI opval = GETMEMSI (current_cpu, pc, ADDSI (tmp_temp, 8));
CPU (h_gr[((FLD (f_srcdst)) + (2))]) = opval;
- TRACE_RESULT (current_cpu, abuf, "gr-add:-VM-index-of-dst-2", 'x', opval);
+ TRACE_RESULT (current_cpu, abuf, "gr-add--DFLT-index-of--DFLT-dst-2", 'x', opval);
}
}
{
SI opval = GETMEMSI (current_cpu, pc, ADDSI (tmp_temp, 4));
CPU (h_gr[((FLD (f_srcdst)) + (1))]) = opval;
- TRACE_RESULT (current_cpu, abuf, "gr-add:-VM-index-of-dst-1", 'x', opval);
+ TRACE_RESULT (current_cpu, abuf, "gr-add--DFLT-index-of--DFLT-dst-1", 'x', opval);
}
{
SI opval = GETMEMSI (current_cpu, pc, ADDSI (tmp_temp, 8));
CPU (h_gr[((FLD (f_srcdst)) + (2))]) = opval;
- TRACE_RESULT (current_cpu, abuf, "gr-add:-VM-index-of-dst-2", 'x', opval);
+ TRACE_RESULT (current_cpu, abuf, "gr-add--DFLT-index-of--DFLT-dst-2", 'x', opval);
}
}
{
SI opval = GETMEMSI (current_cpu, pc, ADDSI (tmp_temp, 4));
CPU (h_gr[((FLD (f_srcdst)) + (1))]) = opval;
- TRACE_RESULT (current_cpu, abuf, "gr-add:-VM-index-of-dst-1", 'x', opval);
+ TRACE_RESULT (current_cpu, abuf, "gr-add--DFLT-index-of--DFLT-dst-1", 'x', opval);
}
{
SI opval = GETMEMSI (current_cpu, pc, ADDSI (tmp_temp, 8));
CPU (h_gr[((FLD (f_srcdst)) + (2))]) = opval;
- TRACE_RESULT (current_cpu, abuf, "gr-add:-VM-index-of-dst-2", 'x', opval);
+ TRACE_RESULT (current_cpu, abuf, "gr-add--DFLT-index-of--DFLT-dst-2", 'x', opval);
}
}
{
SI opval = GETMEMSI (current_cpu, pc, ADDSI (tmp_temp, 4));
CPU (h_gr[((FLD (f_srcdst)) + (1))]) = opval;
- TRACE_RESULT (current_cpu, abuf, "gr-add:-VM-index-of-dst-1", 'x', opval);
+ TRACE_RESULT (current_cpu, abuf, "gr-add--DFLT-index-of--DFLT-dst-1", 'x', opval);
}
{
SI opval = GETMEMSI (current_cpu, pc, ADDSI (tmp_temp, 8));
CPU (h_gr[((FLD (f_srcdst)) + (2))]) = opval;
- TRACE_RESULT (current_cpu, abuf, "gr-add:-VM-index-of-dst-2", 'x', opval);
+ TRACE_RESULT (current_cpu, abuf, "gr-add--DFLT-index-of--DFLT-dst-2", 'x', opval);
}
}
{
SI opval = GETMEMSI (current_cpu, pc, ADDSI (tmp_temp, 4));
CPU (h_gr[((FLD (f_srcdst)) + (1))]) = opval;
- TRACE_RESULT (current_cpu, abuf, "gr-add:-VM-index-of-dst-1", 'x', opval);
+ TRACE_RESULT (current_cpu, abuf, "gr-add--DFLT-index-of--DFLT-dst-1", 'x', opval);
}
{
SI opval = GETMEMSI (current_cpu, pc, ADDSI (tmp_temp, 8));
CPU (h_gr[((FLD (f_srcdst)) + (2))]) = opval;
- TRACE_RESULT (current_cpu, abuf, "gr-add:-VM-index-of-dst-2", 'x', opval);
+ TRACE_RESULT (current_cpu, abuf, "gr-add--DFLT-index-of--DFLT-dst-2", 'x', opval);
}
}
{
SI opval = GETMEMSI (current_cpu, pc, ADDSI (tmp_temp, 4));
CPU (h_gr[((FLD (f_srcdst)) + (1))]) = opval;
- TRACE_RESULT (current_cpu, abuf, "gr-add:-VM-index-of-dst-1", 'x', opval);
+ TRACE_RESULT (current_cpu, abuf, "gr-add--DFLT-index-of--DFLT-dst-1", 'x', opval);
}
{
SI opval = GETMEMSI (current_cpu, pc, ADDSI (tmp_temp, 8));
CPU (h_gr[((FLD (f_srcdst)) + (2))]) = opval;
- TRACE_RESULT (current_cpu, abuf, "gr-add:-VM-index-of-dst-2", 'x', opval);
+ TRACE_RESULT (current_cpu, abuf, "gr-add--DFLT-index-of--DFLT-dst-2", 'x', opval);
}
{
SI opval = GETMEMSI (current_cpu, pc, ADDSI (tmp_temp, 12));
CPU (h_gr[((FLD (f_srcdst)) + (3))]) = opval;
- TRACE_RESULT (current_cpu, abuf, "gr-add:-VM-index-of-dst-3", 'x', opval);
+ TRACE_RESULT (current_cpu, abuf, "gr-add--DFLT-index-of--DFLT-dst-3", 'x', opval);
}
}
{
SI opval = GETMEMSI (current_cpu, pc, ADDSI (tmp_temp, 4));
CPU (h_gr[((FLD (f_srcdst)) + (1))]) = opval;
- TRACE_RESULT (current_cpu, abuf, "gr-add:-VM-index-of-dst-1", 'x', opval);
+ TRACE_RESULT (current_cpu, abuf, "gr-add--DFLT-index-of--DFLT-dst-1", 'x', opval);
}
{
SI opval = GETMEMSI (current_cpu, pc, ADDSI (tmp_temp, 8));
CPU (h_gr[((FLD (f_srcdst)) + (2))]) = opval;
- TRACE_RESULT (current_cpu, abuf, "gr-add:-VM-index-of-dst-2", 'x', opval);
+ TRACE_RESULT (current_cpu, abuf, "gr-add--DFLT-index-of--DFLT-dst-2", 'x', opval);
}
{
SI opval = GETMEMSI (current_cpu, pc, ADDSI (tmp_temp, 12));
CPU (h_gr[((FLD (f_srcdst)) + (3))]) = opval;
- TRACE_RESULT (current_cpu, abuf, "gr-add:-VM-index-of-dst-3", 'x', opval);
+ TRACE_RESULT (current_cpu, abuf, "gr-add--DFLT-index-of--DFLT-dst-3", 'x', opval);
}
}
{
SI opval = GETMEMSI (current_cpu, pc, ADDSI (tmp_temp, 4));
CPU (h_gr[((FLD (f_srcdst)) + (1))]) = opval;
- TRACE_RESULT (current_cpu, abuf, "gr-add:-VM-index-of-dst-1", 'x', opval);
+ TRACE_RESULT (current_cpu, abuf, "gr-add--DFLT-index-of--DFLT-dst-1", 'x', opval);
}
{
SI opval = GETMEMSI (current_cpu, pc, ADDSI (tmp_temp, 8));
CPU (h_gr[((FLD (f_srcdst)) + (2))]) = opval;
- TRACE_RESULT (current_cpu, abuf, "gr-add:-VM-index-of-dst-2", 'x', opval);
+ TRACE_RESULT (current_cpu, abuf, "gr-add--DFLT-index-of--DFLT-dst-2", 'x', opval);
}
{
SI opval = GETMEMSI (current_cpu, pc, ADDSI (tmp_temp, 12));
CPU (h_gr[((FLD (f_srcdst)) + (3))]) = opval;
- TRACE_RESULT (current_cpu, abuf, "gr-add:-VM-index-of-dst-3", 'x', opval);
+ TRACE_RESULT (current_cpu, abuf, "gr-add--DFLT-index-of--DFLT-dst-3", 'x', opval);
}
}
{
SI opval = GETMEMSI (current_cpu, pc, ADDSI (tmp_temp, 4));
CPU (h_gr[((FLD (f_srcdst)) + (1))]) = opval;
- TRACE_RESULT (current_cpu, abuf, "gr-add:-VM-index-of-dst-1", 'x', opval);
+ TRACE_RESULT (current_cpu, abuf, "gr-add--DFLT-index-of--DFLT-dst-1", 'x', opval);
}
{
SI opval = GETMEMSI (current_cpu, pc, ADDSI (tmp_temp, 8));
CPU (h_gr[((FLD (f_srcdst)) + (2))]) = opval;
- TRACE_RESULT (current_cpu, abuf, "gr-add:-VM-index-of-dst-2", 'x', opval);
+ TRACE_RESULT (current_cpu, abuf, "gr-add--DFLT-index-of--DFLT-dst-2", 'x', opval);
}
{
SI opval = GETMEMSI (current_cpu, pc, ADDSI (tmp_temp, 12));
CPU (h_gr[((FLD (f_srcdst)) + (3))]) = opval;
- TRACE_RESULT (current_cpu, abuf, "gr-add:-VM-index-of-dst-3", 'x', opval);
+ TRACE_RESULT (current_cpu, abuf, "gr-add--DFLT-index-of--DFLT-dst-3", 'x', opval);
}
}
{
SI opval = GETMEMSI (current_cpu, pc, ADDSI (tmp_temp, 4));
CPU (h_gr[((FLD (f_srcdst)) + (1))]) = opval;
- TRACE_RESULT (current_cpu, abuf, "gr-add:-VM-index-of-dst-1", 'x', opval);
+ TRACE_RESULT (current_cpu, abuf, "gr-add--DFLT-index-of--DFLT-dst-1", 'x', opval);
}
{
SI opval = GETMEMSI (current_cpu, pc, ADDSI (tmp_temp, 8));
CPU (h_gr[((FLD (f_srcdst)) + (2))]) = opval;
- TRACE_RESULT (current_cpu, abuf, "gr-add:-VM-index-of-dst-2", 'x', opval);
+ TRACE_RESULT (current_cpu, abuf, "gr-add--DFLT-index-of--DFLT-dst-2", 'x', opval);
}
{
SI opval = GETMEMSI (current_cpu, pc, ADDSI (tmp_temp, 12));
CPU (h_gr[((FLD (f_srcdst)) + (3))]) = opval;
- TRACE_RESULT (current_cpu, abuf, "gr-add:-VM-index-of-dst-3", 'x', opval);
+ TRACE_RESULT (current_cpu, abuf, "gr-add--DFLT-index-of--DFLT-dst-3", 'x', opval);
}
}
{
SI opval = GETMEMSI (current_cpu, pc, ADDSI (tmp_temp, 4));
CPU (h_gr[((FLD (f_srcdst)) + (1))]) = opval;
- TRACE_RESULT (current_cpu, abuf, "gr-add:-VM-index-of-dst-1", 'x', opval);
+ TRACE_RESULT (current_cpu, abuf, "gr-add--DFLT-index-of--DFLT-dst-1", 'x', opval);
}
{
SI opval = GETMEMSI (current_cpu, pc, ADDSI (tmp_temp, 8));
CPU (h_gr[((FLD (f_srcdst)) + (2))]) = opval;
- TRACE_RESULT (current_cpu, abuf, "gr-add:-VM-index-of-dst-2", 'x', opval);
+ TRACE_RESULT (current_cpu, abuf, "gr-add--DFLT-index-of--DFLT-dst-2", 'x', opval);
}
{
SI opval = GETMEMSI (current_cpu, pc, ADDSI (tmp_temp, 12));
CPU (h_gr[((FLD (f_srcdst)) + (3))]) = opval;
- TRACE_RESULT (current_cpu, abuf, "gr-add:-VM-index-of-dst-3", 'x', opval);
+ TRACE_RESULT (current_cpu, abuf, "gr-add--DFLT-index-of--DFLT-dst-3", 'x', opval);
}
}
{
SI opval = GETMEMSI (current_cpu, pc, ADDSI (tmp_temp, 4));
CPU (h_gr[((FLD (f_srcdst)) + (1))]) = opval;
- TRACE_RESULT (current_cpu, abuf, "gr-add:-VM-index-of-dst-1", 'x', opval);
+ TRACE_RESULT (current_cpu, abuf, "gr-add--DFLT-index-of--DFLT-dst-1", 'x', opval);
}
{
SI opval = GETMEMSI (current_cpu, pc, ADDSI (tmp_temp, 8));
CPU (h_gr[((FLD (f_srcdst)) + (2))]) = opval;
- TRACE_RESULT (current_cpu, abuf, "gr-add:-VM-index-of-dst-2", 'x', opval);
+ TRACE_RESULT (current_cpu, abuf, "gr-add--DFLT-index-of--DFLT-dst-2", 'x', opval);
}
{
SI opval = GETMEMSI (current_cpu, pc, ADDSI (tmp_temp, 12));
CPU (h_gr[((FLD (f_srcdst)) + (3))]) = opval;
- TRACE_RESULT (current_cpu, abuf, "gr-add:-VM-index-of-dst-3", 'x', opval);
+ TRACE_RESULT (current_cpu, abuf, "gr-add--DFLT-index-of--DFLT-dst-3", 'x', opval);
}
}
{
SI opval = GETMEMSI (current_cpu, pc, ADDSI (tmp_temp, 4));
CPU (h_gr[((FLD (f_srcdst)) + (1))]) = opval;
- TRACE_RESULT (current_cpu, abuf, "gr-add:-VM-index-of-dst-1", 'x', opval);
+ TRACE_RESULT (current_cpu, abuf, "gr-add--DFLT-index-of--DFLT-dst-1", 'x', opval);
}
{
SI opval = GETMEMSI (current_cpu, pc, ADDSI (tmp_temp, 8));
CPU (h_gr[((FLD (f_srcdst)) + (2))]) = opval;
- TRACE_RESULT (current_cpu, abuf, "gr-add:-VM-index-of-dst-2", 'x', opval);
+ TRACE_RESULT (current_cpu, abuf, "gr-add--DFLT-index-of--DFLT-dst-2", 'x', opval);
}
{
SI opval = GETMEMSI (current_cpu, pc, ADDSI (tmp_temp, 12));
CPU (h_gr[((FLD (f_srcdst)) + (3))]) = opval;
- TRACE_RESULT (current_cpu, abuf, "gr-add:-VM-index-of-dst-3", 'x', opval);
+ TRACE_RESULT (current_cpu, abuf, "gr-add--DFLT-index-of--DFLT-dst-3", 'x', opval);
}
}
{
IDESC *idesc_table = CPU_IDESC (current_cpu);
const struct sem_fn_desc *sf;
+ int mach_num = MACH_NUM (CPU_MACH (current_cpu));
for (sf = &sem_fns[0]; sf->fn != 0; ++sf)
{
+ int valid_p = CGEN_INSN_MACH_HAS_P (idesc_table[sf->index].idata, mach_num);
#if FAST_P
- idesc_table[sf->index].sem_fast = sf->fn;
+ if (valid_p)
+ idesc_table[sf->index].sem_fast = sf->fn;
+ else
+ idesc_table[sf->index].sem_fast = SEM_FN_NAME (i960base,x_invalid);
#else
- idesc_table[sf->index].sem_full = sf->fn;
+ if (valid_p)
+ idesc_table[sf->index].sem_full = sf->fn;
+ else
+ idesc_table[sf->index].sem_full = SEM_FN_NAME (i960base,x_invalid);
#endif
}
}
+1999-08-28 Doug Evans <devans@casey.cygnus.com>
+
+ * sem.c: Rebuild
+
1999-08-09 Doug Evans <devans@casey.cygnus.com>
* cpu.h,decode.c,decode.h,model.c,sem-switch.c,sem.c: Rebuild.
{
IDESC *idesc_table = CPU_IDESC (current_cpu);
const struct sem_fn_desc *sf;
+ int mach_num = MACH_NUM (CPU_MACH (current_cpu));
for (sf = &sem_fns[0]; sf->fn != 0; ++sf)
{
+ int valid_p = CGEN_INSN_MACH_HAS_P (idesc_table[sf->index].idata, mach_num);
#if FAST_P
- idesc_table[sf->index].sem_fast = sf->fn;
+ if (valid_p)
+ idesc_table[sf->index].sem_fast = sf->fn;
+ else
+ idesc_table[sf->index].sem_fast = SEM_FN_NAME (m32rbf,x_invalid);
#else
- idesc_table[sf->index].sem_full = sf->fn;
+ if (valid_p)
+ idesc_table[sf->index].sem_full = sf->fn;
+ else
+ idesc_table[sf->index].sem_full = SEM_FN_NAME (m32rbf,x_invalid);
#endif
}
}
+Wed Aug 25 07:55:23 1999 Brendan Kehoe <brendan@cygnus.com>
+
+ * gencode.c (fcnvds <DR_N>,FPUL): Rewrite to use a local anonymous
+ union type, instead of casting to an int* then a float*.
+ (fcnvsd FPUL,<DR_N>): Likewise.
+ (flds <FREG_N>,FPUL): Likewise.
+ (fsts FPUL,<FREG_N>): Likewise.
+
1999-05-08 Felix Lee <flee@cygnus.com>
* configure: Regenerated to track ../common/aclocal.m4 changes.
" saved_state.asregs.exception = SIGILL;",
"else",
"{",
- " char buf[4];",
- " *(float *)buf = DR(n);",
- " FPUL = *(int *)buf;",
+ " union",
+ " {",
+ " int i;",
+ " float f;",
+ " } u;",
+ " u.f = DR(n);",
+ " FPUL = u.i;",
"}",
},
" saved_state.asregs.exception = SIGILL;",
"else",
"{",
- " char buf[4];",
- " *(int *)buf = FPUL;",
- " SET_DR(n, *(float *)buf);",
+ " union",
+ " {",
+ " int i;",
+ " float f;",
+ " } u;",
+ " u.i = FPUL;",
+ " SET_DR(n, u.f);",
"}",
},
/* sh3e */
{ "", "", "flds <FREG_N>,FPUL", "1111nnnn00011101",
- "char buf[4];",
- "*(float *)buf = FR(n);",
- "FPUL = *(int *)buf;",
+ " union",
+ " {",
+ " int i;",
+ " float f;",
+ " } u;",
+ " u.f = FR(n);",
+ " FPUL = u.i;",
},
/* sh3e */
/* sh3e */
{ "", "", "fsts FPUL,<FREG_N>", "1111nnnn00001101",
- "char buf[4];",
- "*(int *)buf = FPUL;",
- "SET_FR (n, *(float *)buf);",
+ " union",
+ " {",
+ " int i;",
+ " float f;",
+ " } u;",
+ " u.i = FPUL;",
+ " SET_FR (n, u.f);",
},
{ "", "n", "jmp @<REG_N>", "0100nnnn00101011",
+1999-08-30 Doug Evans <devans@casey.cygnus.com>
+
+ * sim/arm/thumb/allthumb.exp: New driver for thumb testcases.
+ * sim/arm/allinsn.exp: New driver for arm testcases.
+
+ * lib/sim-defs.exp (run_sim_test): Rename all_machs arg to
+ requested_machs, now is list of machs to run tests for.
+ Delete locals AS,ASFLAGS,LD,LDFLAGS. Use target_assemble
+ and target_link instead.
+
1999-07-16 Ben Elliston <bje@cygnus.com>
* sim/arm/misaligned1.ms: New test case.
# Run testcase NAME.
# NAME is either a fully specified file name, or just the file name in which
# case $srcdir/$subdir will be prepended.
-# ALL_MACHS is a list of machs to use if "mach: all" is specified in the file.
-# The file can contain options in the form "# option(mach list): value"
+# REQUESTED_MACHS is a list of machines to run the testcase on. If NAME isn't
+# for the specified machine(s), it is ignored.
+# Typically REQUESTED_MACHS contains just one element, it is up to the caller
+# to iterate over the desired machine variants.
+#
+# The file can contain options in the form "# option(mach list): value".
# Possibilities:
# mach: [all | machine names]
# as[(mach-list)]: <assembler options>
# "fail" if xerror.
# The parens in "optname()" are optional if the specification is for all machs.
-proc run_sim_test { name all_machs } {
+proc run_sim_test { name requested_machs } {
global subdir srcdir
- global AS ASFLAGS LD LDFLAGS SIMFLAGS
+ global SIMFLAGS
global opts
if [string match "*/*" $name] {
# Change \n sequences to newline chars.
regsub -all "\\\\n" $opts(output) "\n" opts(output)
- foreach mach $opts(mach) {
- verbose "Testing $name on $mach."
+ set testcase_machs $opts(mach)
+ if { "$testcase_machs" == "all" } {
+ set testcase_machs $requested_machs
+ }
+
+ foreach mach $testcase_machs {
+ if { [lsearch $requested_machs $mach] < 0 } {
+ verbose -log "Skipping $mach version of $name, not requested."
+ continue
+ }
+
+ verbose -log "Testing $name on machine $mach."
if ![info exists opts(as,$mach)] {
set opts(as,$mach) $opts(as)
}
- send_log "$AS $ASFLAGS $opts(as,$mach) -I$srcdir/$subdir -o ${name}.o $sourcefile\n"
- catch "exec $AS $ASFLAGS $opts(as,$mach) -I$srcdir/$subdir -o ${name}.o $sourcefile" comp_output
+
+ set comp_output [target_assemble $sourcefile ${name}.o "$opts(as,$mach) -I$srcdir/$subdir"]
if ![string match "" $comp_output] {
verbose -log "$comp_output" 3
if ![info exists opts(ld,$mach)] {
set opts(ld,$mach) $opts(ld)
}
- send_log "$LD $LDFLAGS $opts(ld,$mach) -o ${name}.x ${name}.o\n"
- catch "exec $LD $LDFLAGS $opts(ld,$mach) -o ${name}.x ${name}.o" comp_output
+
+ set comp_output [target_link ${name}.o ${name}.x "$opts(ld,$mach)"]
if ![string match "" $comp_output] {
verbose -log "$comp_output" 3
projects / binutils-gdb.git / commitdiff