configured: dirs host-sed kernel-headers uclibc-config busybox-config linux26-config
+prepatch: gcc-patched binutils-patched gdb-patched uclibc-patched
+
cross: $(BASE_TARGETS)
help:
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.24-rc7
-# Wed Jan 9 23:20:41 2008
+# Linux kernel version: 2.6.24
+# Thu Jul 3 22:38:28 2008
#
CONFIG_AVR32=y
CONFIG_GENERIC_GPIO=y
CONFIG_CPU_AT32AP7000=y
# CONFIG_BOARD_ATSTK1000 is not set
CONFIG_BOARD_ATNGW100=y
+# CONFIG_BOARD_ATNGW100_I2C_GPIO is not set
CONFIG_LOADER_U_BOOT=y
#
# CONFIG_AP700X_32_BIT_SMC is not set
CONFIG_AP700X_16_BIT_SMC=y
# CONFIG_AP700X_8_BIT_SMC is not set
+# CONFIG_GPIO_DEV is not set
CONFIG_LOAD_ADDRESS=0x10000000
CONFIG_ENTRY_ADDRESS=0x90000000
CONFIG_PHYS_OFFSET=0x10000000
CONFIG_ZONE_DMA_FLAG=0
CONFIG_VIRT_TO_BUS=y
# CONFIG_OWNERSHIP_TRACE is not set
+# CONFIG_NMI_DEBUGGING is not set
+CONFIG_DW_DMAC=y
# CONFIG_HZ_100 is not set
CONFIG_HZ_250=y
# CONFIG_HZ_300 is not set
#
# I2C Hardware Bus support
#
+# CONFIG_I2C_ATMELTWI is not set
CONFIG_I2C_GPIO=m
# CONFIG_I2C_OCORES is not set
# CONFIG_I2C_PARPORT_LIGHT is not set
#
# MMC/SD Host Controller Drivers
#
+# CONFIG_MMC_ATMELMCI is not set
CONFIG_MMC_SPI=m
CONFIG_NEW_LEDS=y
CONFIG_LEDS_CLASS=y
#
# Automatically generated make config: don't edit
-# Wed Jul 2 05:02:43 2008
+# Fri Jul 4 07:58:19 2008
#
BR2_HAVE_DOT_CONFIG=y
BR2_VERSION="0.10.0-svn"
#
BR2_TARGET_ATMEL_COPYTO=""
BR2_BOARD_PATH="target/device/Atmel/$(BR2_BOARD_NAME)"
+BR2_KERNEL_ARCH_PATCH_VERSION="2.6.24"
+BR2_KERNEL_ARCH_PATCH_DIR="target/device/Atmel/arch-avr32/kernel-patches-$(BR2_KERNEL_ARCH_PATCH_VERSION)"
# BR2_TARGET_VALKA is not set
#
BR2_TOOLCHAIN_EXTERNAL_SOURCE=y
BR2_TOOLCHAIN_SOURCE=y
# BR2_TOOLCHAIN_ATMEL_AVR32_4_1_2 is not set
-BR2_TOOLCHAIN_ATMEL_AVR32_4_2_1=y
+# BR2_TOOLCHAIN_ATMEL_AVR32_4_2_1 is not set
+BR2_TOOLCHAIN_ATMEL_AVR32_4_2_2=y
+# BR2_TOOLCHAIN_ATMEL_AVR32_4_2_3_ENABLE is not set
+# BR2_TOOLCHAIN_ATMEL_AVR32_4_2_3 is not set
# BR2_TOOLCHAIN_UNKNOWNVENDOR is not set
BR2_TOOLCHAIN_ATMEL_AVR32=y
BR2_VENDOR_SITE="$(BR2_ATMEL_MIRROR)"
BR2_VENDOR_SUFFIX="-avr32"
-BR2_VENDOR_BINUTILS_RELEASE="-2.1.3"
-BR2_VENDOR_GCC_RELEASE="-2.1.3"
-BR2_VENDOR_UCLIBC_RELEASE="-2.1.3"
-BR2_VENDOR_GDB_RELEASE="-2.1.3"
+BR2_VENDOR_GDB_RELEASE="-2.1.5"
BR2_VENDOR_PATCH_DIR="target/device/Atmel/toolchain/avr32"
# BR2_EXT_GCC_VERSION_4_1_2 is not set
-BR2_EXT_GCC_VERSION_4_2_1=y
+# BR2_EXT_GCC_VERSION_4_2_1 is not set
+BR2_EXT_GCC_VERSION_4_2_2=y
+# BR2_EXT_GCC_VERSION_4_2_3 is not set
BR2_EXT_BINUTILS_VERSION_2_17=y
BR2_EXT_UCLIBC_VERSION_0_9_29=y
# BR2_EXT_UCLIBC_VERSION_0_9_28_3 is not set
# BR2_GCC_VERSION_3_4_6 is not set
# BR2_GCC_VERSION_4_0_4 is not set
# BR2_GCC_VERSION_4_1_2 is not set
-BR2_GCC_VERSION_4_2_1=y
+# BR2_GCC_VERSION_4_2_1 is not set
+BR2_GCC_VERSION_4_2_2=y
# BR2_GCC_VERSION_4_2_3 is not set
# BR2_GCC_VERSION_4_2_4 is not set
# BR2_GCC_VERSION_4_3_1 is not set
BR2_GCC_SUPPORTS_SYSROOT=y
# BR2_GCC_SUPPORTS_FINEGRAINEDMTUNE is not set
-BR2_GCC_VERSION="4.2.1"
+BR2_GCC_VERSION="4.2.2"
BR2_TOOLCHAIN_SYSROOT=y
# BR2_GCC_USE_SJLJ_EXCEPTIONS is not set
BR2_EXTRA_GCC_CONFIG_OPTIONS=""
BR2_PACKAGE_GDB_HOST=y
# BR2_GDB_VERSION_6_2_1 is not set
# BR2_GDB_VERSION_6_3 is not set
-BR2_GDB_VERSION_6_4=y
+# BR2_GDB_VERSION_6_4 is not set
# BR2_GDB_VERSION_6_5 is not set
# BR2_GDB_VERSION_6_6 is not set
-# BR2_GDB_VERSION_6_7_1 is not set
+BR2_GDB_VERSION_6_7_1=y
# BR2_GDB_VERSION_6_8 is not set
# BR2_GDB_VERSION_SNAPSHOT is not set
-BR2_GDB_VERSION="6.4"
+BR2_GDB_VERSION="6.7.1"
#
# Common Toolchain Options
BR2_PACKAGE_LINUX=y
BR2_PACKAGE_LINUX_KCONFIG="$(BR2_BOARD_PATH)/$(BR2_BOARD_NAME)-linux-2.6.24.config"
BR2_PACKAGE_LINUX_FORMAT="uImage"
-BR2_KERNEL_CURRENT_VERSION="2.6.24.4"
+BR2_KERNEL_CURRENT_VERSION="2.6.25.9"
BR2_KERNEL_NEXT_VERSION="2.6.25"
BR2_KERNEL_THIS_VERSION="2.6.24"
BR2_KERNEL_SITE="http://ftp.kernel.org/pub/linux/kernel/v2.6/"
BR2_MM_PATCH_SITE="http://ftp.kernel.org/pub/linux/kernel/people/akpm/patches/2.6"
BR2_RC_MM_PATCH_DIR="$(BR2_KERNEL_NEXT_VERSION)-rc$(BR2_KERNEL_RC_LEVEL)/2.6.$(BR2_KERNEL_NEXT_VERSION)-rc$(BR2_KERNEL_RC_LEVEL)-mm$(BR2_KERNEL_MM_LEVEL)"
# BR2_LINUX_2_6_STABLE is not set
+# BR2_LINUX_2_6_25 is not set
BR2_LINUX_2_6_24=y
# BR2_LINUX_2_6_23 is not set
# BR2_LINUX_2_6_22_10 is not set
# BR2_LINUX_2_6_21_5 is not set
# BR2_LINUX_2_6_21 is not set
# BR2_LINUX_2_6_20 is not set
-# BR2_LINUX_2_6_25 is not set
+# BR2_LINUX_2_6_26 is not set
+# BR2_LINUX_2_6_27 is not set
# BR2_LINUX26_CUSTOM is not set
#
# BR2_KERNEL_ADD_KERNEL_ORG_PATCH is not set
# BR2_KERNEL_ADD_PATCH is not set
BR2_KERNEL_ARCH_PATCH_ENABLED=y
-BR2_KERNEL_ARCH_PATCH_VERSION="2.6.24"
-BR2_KERNEL_ARCH_PATCH_DIR="target/device/Atmel/arch-avr32/kernel-patches-$(BR2_KERNEL_ARCH_PATCH_VERSION)"
BR2_ARCH_AVR32_2_6_24=y
# BR2_ARCH_AVR32_2_6_23 is not set
# BR2_ARCH_AVR32_2_6_22_10 is not set
+++ /dev/null
-diff -urN uClibc-0.9.28.3-0rig/Makefile uClibc-0.9.28.3/Makefile
---- uClibc-0.9.28.3-0rig/Makefile 2007-07-29 08:20:33.000000000 +0200
-+++ uClibc-0.9.28.3/Makefile 2007-08-20 07:02:53.000000000 +0200
-@@ -157,7 +157,8 @@
- install_dev:
- $(INSTALL) -d $(PREFIX)$(DEVEL_PREFIX)lib
- $(INSTALL) -d $(PREFIX)$(DEVEL_PREFIX)include
-- -$(INSTALL) -m 644 lib/*.[ao] $(PREFIX)$(DEVEL_PREFIX)lib/
-+ -$(INSTALL) -m 644 lib/*.a $(PREFIX)$(DEVEL_PREFIX)lib/
-+ -$(INSTALL) -m 644 lib/*.so* $(PREFIX)$(DEVEL_PREFIX)lib/
- if [ "$(KERNEL_SOURCE)" = "$(DEVEL_PREFIX)" ] ; then \
- extra_exclude="--exclude include/linux --exclude include/asm'*'" ; \
- else \
+++ /dev/null
-diff -urN uClibc-0.9.29-0rig/include/assert.h uClibc-0.9.29/include/assert.h
---- uClibc-0.9.29-0rig/include/assert.h 2005-11-03 23:42:46.000000000 +0100
-+++ uClibc-0.9.29/include/assert.h 2007-08-13 19:10:57.000000000 +0200
-@@ -31,7 +31,7 @@
- #define _ASSERT_H 1
- #include <features.h>
-
--#if defined __cplusplus && __GNUC_PREREQ (2,95)
-+#if defined __cplusplus && __GNUC_PREREQ(2,95)
- # define __ASSERT_VOID_CAST static_cast<void>
- #else
- # define __ASSERT_VOID_CAST (void)
-@@ -59,13 +59,17 @@
- (__ASSERT_VOID_CAST ((expr) ? 0 : \
- (__assert (__STRING(expr), __FILE__, __LINE__, \
- __ASSERT_FUNCTION), 0)))
--
-+
-+/* Define some temporaries to workaround tinyx makedepend bug */
-+#define __GNUC_PREREQ_2_6 __GNUC_PREREQ(2, 6)
-+#define __GNUC_PREREQ_2_4 __GNUC_PREREQ(2, 4)
- /* Version 2.4 and later of GCC define a magical variable `__PRETTY_FUNCTION__'
- which contains the name of the function currently being defined.
- This is broken in G++ before version 2.6.
- C9x has a similar variable called __func__, but prefer the GCC one since
- it demangles C++ function names. */
--# if defined __cplusplus ? __GNUC_PREREQ (2, 6) : __GNUC_PREREQ (2, 4)
-+
-+# if defined __cplusplus ? __GNUC_PREREQ_2_6 : __GNUC_PREREQ_2_4
- # define __ASSERT_FUNCTION __PRETTY_FUNCTION__
- # else
- # if defined __STDC_VERSION__ && __STDC_VERSION__ >= 199901L
-diff -urN uClibc-0.9.29-0rig/include/complex.h uClibc-0.9.29/include/complex.h
---- uClibc-0.9.29-0rig/include/complex.h 2002-05-09 10:15:21.000000000 +0200
-+++ uClibc-0.9.29/include/complex.h 2007-08-13 17:55:29.000000000 +0200
-@@ -33,7 +33,7 @@
- /* We might need to add support for more compilers here. But since ISO
- C99 is out hopefully all maintained compilers will soon provide the data
- types `float complex' and `double complex'. */
--#if __GNUC_PREREQ (2, 7) && !__GNUC_PREREQ (2, 97)
-+#if __GNUC_PREREQ(2, 7) && !__GNUC_PREREQ(2, 97)
- # define _Complex __complex__
- #endif
-
-diff -urN uClibc-0.9.29-0rig/include/features.h uClibc-0.9.29/include/features.h
---- uClibc-0.9.29-0rig/include/features.h 2006-11-29 22:10:04.000000000 +0100
-+++ uClibc-0.9.29/include/features.h 2007-08-13 17:55:51.000000000 +0200
-@@ -143,7 +143,7 @@
-
- /* Convenience macros to test the versions of glibc and gcc.
- Use them like this:
-- #if __GNUC_PREREQ (2,8)
-+ #if __GNUC_PREREQ(2,8)
- ... code requiring gcc 2.8 or later ...
- #endif
- Note - they won't work for gcc1 or glibc1, since the _MINOR macros
-@@ -366,7 +366,7 @@
- #endif /* !ASSEMBLER */
-
- /* Decide whether we can define 'extern inline' functions in headers. */
--#if __GNUC_PREREQ (2, 7) && defined __OPTIMIZE__ \
-+#if __GNUC_PREREQ(2, 7) && defined __OPTIMIZE__ \
- && !defined __OPTIMIZE_SIZE__ && !defined __NO_INLINE__
- # define __USE_EXTERN_INLINES 1
- #endif
-diff -urN uClibc-0.9.29-0rig/include/tgmath.h uClibc-0.9.29/include/tgmath.h
---- uClibc-0.9.29-0rig/include/tgmath.h 2002-05-09 10:15:21.000000000 +0200
-+++ uClibc-0.9.29/include/tgmath.h 2007-08-13 17:56:17.000000000 +0200
-@@ -34,7 +34,7 @@
- do not try this for now and instead concentrate only on GNU CC. Once
- we have more information support for other compilers might follow. */
-
--#if __GNUC_PREREQ (2, 7)
-+#if __GNUC_PREREQ(2, 7)
-
- # ifdef __NO_LONG_DOUBLE_MATH
- # define __tgml(fct) fct
if BR2_TOOLCHAIN_EXTERNAL_SOURCE
choice
prompt "Source location:"
- default BR2_TOOLCHAIN_ATMEL_AVR32_4_2_1 if BR2_avr32
+ default BR2_TOOLCHAIN_ATMEL_AVR32_4_2_2 if BR2_avr32
help
Select whether to use the toolchain built by the buildroot
system or an external pre-built toolchain.
This will not be able to build qtopia
due to internal errors.
+config BR2_TOOLCHAIN_ATMEL_AVR32_4_2_2
+ bool "Use prepatched source for AVR32 gcc-4.2.2 toolchain"
+ depends on BR2_avr32
+ select BR2_EXT_GCC_VERSION_4_2_2
+ select BR2_EXT_BINUTILS_VERSION_2_17
+ select BR2_EXT_UCLIBC_VERSION_0_9_29
+ select BR2_TOOLCHAIN_ATMEL_AVR32
+ help
+ The gcc-4.2.2 toolchain for the AVR32
+ * gcc-4.2.2
+ * binutils-2.17
+ * uClibc-0.9.29
+ * gdb-6.7.1
+ It is generated from buildroot-avr32-v2.2.0-rc4
+ in http://www.atmel.no/buildroot
+
+config BR2_TOOLCHAIN_ATMEL_AVR32_4_2_3_ENABLE
+ bool
+ default n
+
+config BR2_TOOLCHAIN_ATMEL_AVR32_4_2_3
+ bool "Use prepatched source for AVR32 gcc-4.2.3 toolchain"
+ depends on BR2_avr32
+ depends on BR2_TOOLCHAIN_ATMEL_AVR32_4_2_3_ENABLE
+ select BR2_EXT_GCC_VERSION_4_2_3
+ select BR2_EXT_BINUTILS_VERSION_2_17
+ select BR2_EXT_UCLIBC_VERSION_0_9_29
+ select BR2_TOOLCHAIN_ATMEL_AVR32
+ help
+ The gcc-4.2.3 toolchain for the AVR32
+ * gcc-4.2.3
+ * binutils-2.17
+ * uClibc-0.9.29
+ * gdb-6.7.1
+ It is generated from buildroot-avr32-v2.2.0-rc4
+ in http://www.atmel.no/buildroot
+
config BR2_TOOLCHAIN_UNKNOWNVENDOR
bool "Use prepatched source from unknown vendor"
config BR2_VENDOR_BINUTILS_RELEASE
string
- default "-2.1.3" if BR2_TOOLCHAIN_ATMEL_AVR32
+ default "-2.1.3" if BR2_TOOLCHAIN_ATMEL_AVR32_4_1_2
+ default "-2.1.3" if BR2_TOOLCHAIN_ATMEL_AVR32_4_2_1
+ default "-2.1.5" if BR2_TOOLCHAIN_ATMEL_AVR32_4_2_2
+ default "-2.1.5" if BR2_TOOLCHAIN_ATMEL_AVR32_4_2_3
config BR2_VENDOR_GCC_RELEASE
string
default "-2.0" if BR2_TOOLCHAIN_ATMEL_AVR32_4_1_2
default "-2.1.3" if BR2_TOOLCHAIN_ATMEL_AVR32_4_2_1
+ default "-2.1.5" if BR2_TOOLCHAIN_ATMEL_AVR32_4_2_2
+ default "-2.1.5" if BR2_TOOLCHAIN_ATMEL_AVR32_4_2_3
config BR2_VENDOR_UCLIBC_RELEASE
string
- default "-2.1.3" if BR2_TOOLCHAIN_ATMEL_AVR32
+ default "-2.1.3" if BR2_TOOLCHAIN_ATMEL_AVR32_4_1_2
+ default "-2.1.3" if BR2_TOOLCHAIN_ATMEL_AVR32_4_2_1
+ default "-2.1.5" if BR2_TOOLCHAIN_ATMEL_AVR32_4_2_2
+ default "-2.1.5" if BR2_TOOLCHAIN_ATMEL_AVR32_4_2_3
config BR2_VENDOR_GDB_RELEASE
string
- default "-2.1.3" if BR2_TOOLCHAIN_ATMEL_AVR32
+ default "-2.1.3" if BR2_GDB_VERSION_6_4
+ default "-2.1.3" if BR2_GDB_VERSION_6_4
+ default "-2.1.5" if BR2_GDB_VERSION_6_7_1
config BR2_VENDOR_PATCH_DIR
string
- default "target/device/Atmel/toolchain/avr32" if BR2_TOOLCHAIN_ATMEL_AVR32
+ default "Atmel/avr32" if BR2_TOOLCHAIN_ATMEL_AVR32
endif
if BR2_TOOLCHAIN_UNKNOWNVENDOR
config BR2_VENDOR_SITE
config BR2_VENDOR_PATCH_DIR
string "local accumulated patchdir"
- default "target/device/$(VENDOR)/toolchain/"
+ default "$(VENDOR)/$(ARCH)/"
endif
default y if !BR2_TOOLCHAIN_EXTERNAL_SOURCE
default n if BR2_TOOLCHAIN_EXTERNAL_SOURCE
+config BR2_EXT_GCC_VERSION_4_2_2
+ bool
+ default y if !BR2_TOOLCHAIN_EXTERNAL_SOURCE
+ default n if BR2_TOOLCHAIN_EXTERNAL_SOURCE
+
+config BR2_EXT_GCC_VERSION_4_2_3
+ bool
+ default y if !BR2_TOOLCHAIN_EXTERNAL_SOURCE
+ default n if BR2_TOOLCHAIN_EXTERNAL_SOURCE
+
config BR2_EXT_BINUTILS_VERSION_2_17
bool
default y if !BR2_TOOLCHAIN_EXTERNAL_SOURCE
# gcc has a bunch of needed stuff....
include toolchain/gcc/Makefile.in
+
BINUTILS_PATCH_DIR:=toolchain/binutils/$(BINUTILS_VERSION)
else # ifeq ($(BR2_TOOLCHAIN_EXTERNAL_SOURCE),)
BINUTILS_SITE:=$(VENDOR_SITE)
-BINUTILS_PATCH_DIR:=$(VENDOR_PATCH_DIR)/binutils-$(BINUTILS_OFFICIAL_VERSION)
+BINUTILS_PATCH_DIR:=toolchain/binutils/ext_source/$(VENDOR_PATCH_DIR)/$(BINUTILS_OFFICIAL_VERSION)
endif
BINUTILS_SOURCE:=binutils-$(BINUTILS_OFFICIAL_VERSION).tar.bz2
$(CONFIG_UPDATE) $(BINUTILS_DIR)
touch $@
+binutils-patched: $(BINUTILS_DIR)/.patched
$(BINUTILS_DIR)/.patched: $(BINUTILS_DIR)/.unpacked
# Apply appropriate binutils patches.
toolchain/patch-kernel.sh $(BINUTILS_DIR) $(BINUTILS_PATCH_DIR) \*.patch
choice
prompt "GCC compiler Version"
default BR2_GCC_VERSION_4_2_4 if !BR2_avr32
- default BR2_GCC_VERSION_4_1_2 if BR2_avr32
+ default BR2_GCC_VERSION_4_2_3 if BR2_avr32
help
Select the version of gcc you wish to use.
depends on BR2_EXT_GCC_VERSION_4_2_1
bool "gcc 4.2.1"
+ config BR2_GCC_VERSION_4_2_2
+ depends on BR2_avr32
+ depends on BR2_EXT_GCC_VERSION_4_2_2
+ bool "gcc 4.2.2"
+
config BR2_GCC_VERSION_4_2_3
- depends on !BR2_avr32 && !BR2_nios2
- depends on BR2_DEPRECATED
+ depends on !BR2_nios2
+ depends on BR2_EXT_GCC_VERSION_4_2_3 || BR2_DEPRECATED
bool "gcc 4.2.3"
config BR2_GCC_VERSION_4_2_4
config BR2_GCC_SUPPORTS_FINEGRAINEDMTUNE
bool
- default n if BR2_GCC_VERSION_3_4_6 || BR2_GCC_VERSION_4_0_4 || BR2_GCC_VERSION_4_1_2 || BR2_GCC_VERSION_4_2_1 || BR2_GCC_VERSION_4_2_3 || BR2_GCC_VERSION_4_2_4
- default y if !BR2_GCC_VERSION_3_4_6 && !BR2_GCC_VERSION_4_0_4 && !BR2_GCC_VERSION_4_1_2 && !BR2_GCC_VERSION_4_2_1 && !BR2_GCC_VERSION_4_2_3 && !BR2_GCC_VERSION_4_2_4
+ default n if BR2_GCC_VERSION_3_4_6 || BR2_GCC_VERSION_4_0_4 || BR2_GCC_VERSION_4_1_2 || BR2_GCC_VERSION_4_2_1 || BR2_GCC_VERSION_4_2_2 || BR2_GCC_VERSION_4_2_3 || BR2_GCC_VERSION_4_2_4
+ default y if !BR2_GCC_VERSION_3_4_6 && !BR2_GCC_VERSION_4_0_4 && !BR2_GCC_VERSION_4_1_2 && !BR2_GCC_VERSION_4_2_1 && !BR2_GCC_VERSION_4_2_2 && !BR2_GCC_VERSION_4_2_3 && !BR2_GCC_VERSION_4_2_4
config BR2_GCC_SNAP_DATE
string "GCC snapshot date"
default "4.0.4" if BR2_GCC_VERSION_4_0_4
default "4.1.2" if BR2_GCC_VERSION_4_1_2
default "4.2.1" if BR2_GCC_VERSION_4_2_1
+ default "4.2.2" if BR2_GCC_VERSION_4_2_2
default "4.2.3" if BR2_GCC_VERSION_4_2_3
default "4.2.4" if BR2_GCC_VERSION_4_2_4
default "4.3.1" if BR2_GCC_VERSION_4_3_1
ifeq ($(BR2_TOOLCHAIN_SYSROOT),y)
ifeq ($(GCC_SNAP_DATE),)
-GCC_OFFICIAL_VER:=$(GCC_VERSION)
+GCC_OFFICIAL_VERSION:=$(GCC_VERSION)
GCC_SITE:=$(BR2_GNU_MIRROR)/gcc/gcc-$(GCC_VERSION)
-#GCC_SITE:=ftp://ftp.ibiblio.org/pub/mirrors/gnu/ftp/gnu/gcc/gcc-$(GCC_OFFICIAL_VER)
+#GCC_SITE:=ftp://ftp.ibiblio.org/pub/mirrors/gnu/ftp/gnu/gcc/gcc-$(GCC_OFFICIAL_VERSION)
else
-GCC_OFFICIAL_VER:=$(GCC_VERSION)-$(GCC_SNAP_DATE)
-GCC_SITE:=ftp://sources.redhat.com/pub/gcc/snapshots/$(GCC_OFFICIAL_VER)
+GCC_OFFICIAL_VERSION:=$(GCC_VERSION)-$(GCC_SNAP_DATE)
+GCC_SITE:=ftp://sources.redhat.com/pub/gcc/snapshots/$(GCC_OFFICIAL_VERSION)
endif
# redefine if using an external prepatched gcc source
ifneq ($(BR2_TOOLCHAIN_BUILDROOT),y)
GCC_SITE:=$(VENDOR_SITE)
-GCC_OFFICIAL_VER:=$(GCC_VERSION)$(VENDOR_SUFFIX)$(VENDOR_GCC_RELEASE)
-GCC_PATCH_DIR:=$(VENDOR_PATCH_DIR)/gcc-$(GCC_OFFICIAL_VER)
+GCC_OFFICIAL_VERSION:=$(GCC_VERSION)$(VENDOR_SUFFIX)$(VENDOR_GCC_RELEASE)
+GCC_PATCH_DIR:=toolchain/gcc/ext_source/$(VENDOR_PATCH_DIR)/$(GCC_OFFICIAL_VERSION)
endif #!BR2_TOOLCHAIN_BUILDROOT
# define patch location
ifeq ($(GCC_SNAP_DATE),) # Not a snapshot
GCC_PATCH_DIR:=toolchain/gcc/$(GCC_VERSION)
else # Is a snapshot
-ifneq ($(wildcard toolchain/gcc/$(GCC_OFFICIAL_VER)),) # Snapshot patch?
-GCC_PATCH_DIR:=toolchain/gcc/$(GCC_OFFICIAL_VER)
+ifneq ($(wildcard toolchain/gcc/$(GCC_OFFICIAL_VERSION)),) # Snapshot patch?
+GCC_PATCH_DIR:=toolchain/gcc/$(GCC_OFFICIAL_VERSION)
else # Normal patch to snapshot
# Use the normal location, if the dedicated location does not exist
GCC_PATCH_DIR:=toolchain/gcc/$(GCC_VERSION)
endif # Not a snapshot
endif # BR2_TOOLCHAIN_BUILDROOT
-GCC_SOURCE:=gcc-$(GCC_OFFICIAL_VER).tar.bz2
-GCC_DIR:=$(TOOL_BUILD_DIR)/gcc-$(GCC_OFFICIAL_VER)
+GCC_SOURCE:=gcc-$(GCC_OFFICIAL_VERSION).tar.bz2
+GCC_DIR:=$(TOOL_BUILD_DIR)/gcc-$(GCC_OFFICIAL_VERSION)
GCC_CAT:=$(BZCAT)
GCC_STRIP_HOST_BINARIES:=nope
GCC_SRC_DIR:=$(GCC_DIR)
choice
prompt "GDB debugger Version"
default BR2_GDB_VERSION_6_6 if !BR2_avr32
- default BR2_GDB_VERSION_6_4 if BR2_avr32
+ default BR2_GDB_VERSION_6_7_1 if BR2_avr32
depends on BR2_PACKAGE_GDB || BR2_PACKAGE_GDB_SERVER || BR2_PACKAGE_GDB_HOST
help
Select the version of gdb you wish to use.
config BR2_GDB_VERSION_6_7_1
bool "gdb 6.7.1"
- depends on !BR2_avr32
config BR2_GDB_VERSION_6_8
bool "gdb 6.8"
ifeq ($(BR2_TOOLCHAIN_EXTERNAL_SOURCE),y)
GDB_SITE:=$(VENDOR_SITE)
-GDB_PATCH_DIR:=$(VENDOR_PATCH_DIR)/gdb-$(GDB_OFFICIAL_VERSION)
+GDB_PATCH_DIR:=toolchain/gdb/ext_source/$(VENDOR_PATCH_DIR)/$(GDB_OFFICIAL_VERSION)
else
GDB_SITE:=$(BR2_GNU_MIRROR)/gdb
GDB_PATCH_DIR:=toolchain/gdb/$(GDB_OFFICIAL_VERSION)
$(CONFIG_UPDATE) $(GDB_DIR)
touch $@
+gdb-patched: $(GDB_DIR)/.unpacked
+$(GDB_DIR)/.patched: $(GDB_DIR)/.unpacked
+ toolchain/patch-kernel.sh $(GDB_DIR) $(GDB_PATCH_DIR) \*.patch
+ $(CONFIG_UPDATE) $(GDB_DIR)
+ touch $@
+
gdb-dirclean:
rm -rf $(GDB_DIR)
bash_cv_func_sigsetjmp=present \
bash_cv_have_mbstate_t=yes
-$(GDB_TARGET_DIR)/.configured: $(GDB_DIR)/.unpacked
+$(GDB_TARGET_DIR)/.configured: $(GDB_DIR)/.patched
mkdir -p $(GDB_TARGET_DIR)
(cd $(GDB_TARGET_DIR); \
gdb_cv_func_sigsetjmp=yes \
--- /dev/null
+diff -urN uClibc-0.9.28.3-0rig/Makefile uClibc-0.9.28.3/Makefile
+--- uClibc-0.9.28.3-0rig/Makefile 2007-07-29 08:20:33.000000000 +0200
++++ uClibc-0.9.28.3/Makefile 2007-08-20 07:02:53.000000000 +0200
+@@ -157,7 +157,8 @@
+ install_dev:
+ $(INSTALL) -d $(PREFIX)$(DEVEL_PREFIX)lib
+ $(INSTALL) -d $(PREFIX)$(DEVEL_PREFIX)include
+- -$(INSTALL) -m 644 lib/*.[ao] $(PREFIX)$(DEVEL_PREFIX)lib/
++ -$(INSTALL) -m 644 lib/*.a $(PREFIX)$(DEVEL_PREFIX)lib/
++ -$(INSTALL) -m 644 lib/*.so* $(PREFIX)$(DEVEL_PREFIX)lib/
+ if [ "$(KERNEL_SOURCE)" = "$(DEVEL_PREFIX)" ] ; then \
+ extra_exclude="--exclude include/linux --exclude include/asm'*'" ; \
+ else \
--- /dev/null
+diff -urN uClibc-0.9.29-0rig/include/assert.h uClibc-0.9.29/include/assert.h
+--- uClibc-0.9.29-0rig/include/assert.h 2005-11-03 23:42:46.000000000 +0100
++++ uClibc-0.9.29/include/assert.h 2007-08-13 19:10:57.000000000 +0200
+@@ -31,7 +31,7 @@
+ #define _ASSERT_H 1
+ #include <features.h>
+
+-#if defined __cplusplus && __GNUC_PREREQ (2,95)
++#if defined __cplusplus && __GNUC_PREREQ(2,95)
+ # define __ASSERT_VOID_CAST static_cast<void>
+ #else
+ # define __ASSERT_VOID_CAST (void)
+@@ -59,13 +59,17 @@
+ (__ASSERT_VOID_CAST ((expr) ? 0 : \
+ (__assert (__STRING(expr), __FILE__, __LINE__, \
+ __ASSERT_FUNCTION), 0)))
+-
++
++/* Define some temporaries to workaround tinyx makedepend bug */
++#define __GNUC_PREREQ_2_6 __GNUC_PREREQ(2, 6)
++#define __GNUC_PREREQ_2_4 __GNUC_PREREQ(2, 4)
+ /* Version 2.4 and later of GCC define a magical variable `__PRETTY_FUNCTION__'
+ which contains the name of the function currently being defined.
+ This is broken in G++ before version 2.6.
+ C9x has a similar variable called __func__, but prefer the GCC one since
+ it demangles C++ function names. */
+-# if defined __cplusplus ? __GNUC_PREREQ (2, 6) : __GNUC_PREREQ (2, 4)
++
++# if defined __cplusplus ? __GNUC_PREREQ_2_6 : __GNUC_PREREQ_2_4
+ # define __ASSERT_FUNCTION __PRETTY_FUNCTION__
+ # else
+ # if defined __STDC_VERSION__ && __STDC_VERSION__ >= 199901L
+diff -urN uClibc-0.9.29-0rig/include/complex.h uClibc-0.9.29/include/complex.h
+--- uClibc-0.9.29-0rig/include/complex.h 2002-05-09 10:15:21.000000000 +0200
++++ uClibc-0.9.29/include/complex.h 2007-08-13 17:55:29.000000000 +0200
+@@ -33,7 +33,7 @@
+ /* We might need to add support for more compilers here. But since ISO
+ C99 is out hopefully all maintained compilers will soon provide the data
+ types `float complex' and `double complex'. */
+-#if __GNUC_PREREQ (2, 7) && !__GNUC_PREREQ (2, 97)
++#if __GNUC_PREREQ(2, 7) && !__GNUC_PREREQ(2, 97)
+ # define _Complex __complex__
+ #endif
+
+diff -urN uClibc-0.9.29-0rig/include/features.h uClibc-0.9.29/include/features.h
+--- uClibc-0.9.29-0rig/include/features.h 2006-11-29 22:10:04.000000000 +0100
++++ uClibc-0.9.29/include/features.h 2007-08-13 17:55:51.000000000 +0200
+@@ -143,7 +143,7 @@
+
+ /* Convenience macros to test the versions of glibc and gcc.
+ Use them like this:
+- #if __GNUC_PREREQ (2,8)
++ #if __GNUC_PREREQ(2,8)
+ ... code requiring gcc 2.8 or later ...
+ #endif
+ Note - they won't work for gcc1 or glibc1, since the _MINOR macros
+@@ -366,7 +366,7 @@
+ #endif /* !ASSEMBLER */
+
+ /* Decide whether we can define 'extern inline' functions in headers. */
+-#if __GNUC_PREREQ (2, 7) && defined __OPTIMIZE__ \
++#if __GNUC_PREREQ(2, 7) && defined __OPTIMIZE__ \
+ && !defined __OPTIMIZE_SIZE__ && !defined __NO_INLINE__
+ # define __USE_EXTERN_INLINES 1
+ #endif
+diff -urN uClibc-0.9.29-0rig/include/tgmath.h uClibc-0.9.29/include/tgmath.h
+--- uClibc-0.9.29-0rig/include/tgmath.h 2002-05-09 10:15:21.000000000 +0200
++++ uClibc-0.9.29/include/tgmath.h 2007-08-13 17:56:17.000000000 +0200
+@@ -34,7 +34,7 @@
+ do not try this for now and instead concentrate only on GNU CC. Once
+ we have more information support for other compilers might follow. */
+
+-#if __GNUC_PREREQ (2, 7)
++#if __GNUC_PREREQ(2, 7)
+
+ # ifdef __NO_LONG_DOUBLE_MATH
+ # define __tgml(fct) fct
ifeq ($(BR2_TOOLCHAIN_BUILDROOT),y)
UCLIBC_PATCH_DIR:=toolchain/uClibc/
else
-UCLIBC_PATCH_DIR:=$(VENDOR_PATCH_DIR)/uClibc-$(UCLIBC_OFFICIAL_VERSION)
+UCLIBC_PATCH_DIR:=toolchain/uClibc/ext_source/$(VENDOR_PATCH_DIR)/$(UCLIBC_OFFICIAL_VERSION)
endif
UCLIBC_DIR:=$(TOOL_BUILD_DIR)/uClibc-$(UCLIBC_OFFICIAL_VERSION)
UCLIBC_LOCALE_DATA=
endif
+uclibc-unpacked: $(UCLIBC_DIR)/.unpacked
$(UCLIBC_DIR)/.unpacked: $(DL_DIR)/$(UCLIBC_SOURCE) $(UCLIBC_LOCALE_DATA)
mkdir -p $(TOOL_BUILD_DIR)
rm -rf $(UCLIBC_DIR)
$(UCLIBC_CAT) $(DL_DIR)/$(UCLIBC_SOURCE) | tar -C $(TOOL_BUILD_DIR) $(TAR_OPTIONS) -
+ touch $@
+
+uclibc-patched: $(UCLIBC_DIR)/.patched
+$(UCLIBC_DIR)/.patched: $(UCLIBC_DIR)/.unpacked
ifneq ($(BR2_UCLIBC_VERSION_SNAPSHOT),y)
toolchain/patch-kernel.sh $(UCLIBC_DIR) $(UCLIBC_PATCH_DIR) \
uClibc-$(UCLIBC_OFFICIAL_VERSION)-\*.patch \
endif
touch $@
+
# Some targets may wish to provide their own UCLIBC_CONFIG_FILE...
-$(UCLIBC_DIR)/.oldconfig: $(UCLIBC_DIR)/.unpacked $(UCLIBC_CONFIG_FILE)
+$(UCLIBC_DIR)/.oldconfig: $(UCLIBC_DIR)/.patched $(UCLIBC_CONFIG_FILE)
cp -f $(UCLIBC_CONFIG_FILE) $(UCLIBC_DIR)/.oldconfig
$(SED) 's,^CROSS_COMPILER_PREFIX=.*,CROSS_COMPILER_PREFIX="$(TARGET_CROSS)",g' \
-e 's,# TARGET_$(UCLIBC_TARGET_ARCH) is not set,TARGET_$(UCLIBC_TARGET_ARCH)=y,g' \
projects / buildroot.git / commitdiff