system: run getty on boot console by default

We used to specify explicitly serial port with all its settings
for init to instantiate getty.

This limits usecases when the same one rootfs could be used.

For example following cases won't work well with hardcoded
serial console settings:
 * On the same board other serial port is expected to be used
 * The same rootfs is intended to be used on different boards with
   different serial ports (like ttySx vs ttyAMAx or even ttyx)

With this change by default we rely on "console" specified in
kernel's boot command line.

What is important getty will be set on the last console
specified in bootargs.

For example is a kernel comand line:
--->---
bootargs="... console=tty0 console=ttyS3,115200n8..."
--->---

This now will instantiate serial console on ttyS3 but not on tty0.

Tested with both Busybox and SysV init.

Signed-off-by: Alexey Brodkin <abrodkin@synopsys.com>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Cc: Peter Korsgaard <peter@korsgaard.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

diff --git a/system/Config.in b/system/Config.in
index a3b7aff36a0ac03298c6901b1d943204e79c8f83..4d7a4e3cc3c99cb1bc1eb7713c493c31db2482ce 100644 (file)
--- a/system/Config.in
+++ b/system/Config.in
@@ -263,13 +263,13 @@ if BR2_TARGET_GENERIC_GETTY
 menu "getty options"
 config BR2_TARGET_GENERIC_GETTY_PORT
        string "TTY port"
-       default "ttyS0"
+       default "console"
        help
          Specify a port to run a getty on.
 
 choice
        prompt "Baudrate"
-       default BR2_TARGET_GENERIC_GETTY_BAUDRATE_115200
+       default BR2_TARGET_GENERIC_GETTY_BAUDRATE_KEEP
        help
          Select a baudrate to use.