+2013-03-26 Mike Frysinger <vapier@gentoo.org>
+
+ * aclocal.m4, configure: Regenerate.
+
2013-03-23 Joel Sherrill <joel.sherrill@oarcorp.com>
* configure.ac: Use $SIM_DV_SOCKSER_O.
# General Public License for more details.
#
# You should have received a copy of the GNU General Public License
-# along with this program; if not, see <http://www.gnu.org/licenses/>.
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
#
# As a special exception to the GNU General Public License, if you
# distribute this file as part of a program that contains a
fi[]dnl
])# PKG_CHECK_MODULES
+
+# PKG_INSTALLDIR(DIRECTORY)
+# -------------------------
+# Substitutes the variable pkgconfigdir as the location where a module
+# should install pkg-config .pc files. By default the directory is
+# $libdir/pkgconfig, but the default can be changed by passing
+# DIRECTORY. The user can override through the --with-pkgconfigdir
+# parameter.
+AC_DEFUN([PKG_INSTALLDIR],
+[m4_pushdef([pkg_default], [m4_default([$1], ['${libdir}/pkgconfig'])])
+m4_pushdef([pkg_description],
+ [pkg-config installation directory @<:@]pkg_default[@:>@])
+AC_ARG_WITH([pkgconfigdir],
+ [AS_HELP_STRING([--with-pkgconfigdir], pkg_description)],,
+ [with_pkgconfigdir=]pkg_default)
+AC_SUBST([pkgconfigdir], [$with_pkgconfigdir])
+m4_popdef([pkg_default])
+m4_popdef([pkg_description])
+]) dnl PKG_INSTALLDIR
+
+
+# PKG_NOARCH_INSTALLDIR(DIRECTORY)
+# -------------------------
+# Substitutes the variable noarch_pkgconfigdir as the location where a
+# module should install arch-independent pkg-config .pc files. By
+# default the directory is $datadir/pkgconfig, but the default can be
+# changed by passing DIRECTORY. The user can override through the
+# --with-noarch-pkgconfigdir parameter.
+AC_DEFUN([PKG_NOARCH_INSTALLDIR],
+[m4_pushdef([pkg_default], [m4_default([$1], ['${datadir}/pkgconfig'])])
+m4_pushdef([pkg_description],
+ [pkg-config arch-independent installation directory @<:@]pkg_default[@:>@])
+AC_ARG_WITH([noarch-pkgconfigdir],
+ [AS_HELP_STRING([--with-noarch-pkgconfigdir], pkg_description)],,
+ [with_noarch_pkgconfigdir=]pkg_default)
+AC_SUBST([noarch_pkgconfigdir], [$with_noarch_pkgconfigdir])
+m4_popdef([pkg_default])
+m4_popdef([pkg_description])
+]) dnl PKG_NOARCH_INSTALLDIR
+
+
+# PKG_CHECK_VAR(VARIABLE, MODULE, CONFIG-VARIABLE,
+# [ACTION-IF-FOUND], [ACTION-IF-NOT-FOUND])
+# -------------------------------------------
+# Retrieves the value of the pkg-config variable for the given module.
+AC_DEFUN([PKG_CHECK_VAR],
+[AC_REQUIRE([PKG_PROG_PKG_CONFIG])dnl
+AC_ARG_VAR([$1], [value of $3 for $2, overriding pkg-config])dnl
+
+_PKG_CONFIG([$1], [variable="][$3]["], [$2])
+AS_VAR_COPY([$1], [pkg_cv_][$1])
+
+AS_VAR_IF([$1], [""], [$5], [$4])dnl
+])# PKG_CHECK_VAR
+
# AM_CONDITIONAL -*- Autoconf -*-
# Copyright (C) 1997, 2000, 2001, 2003, 2004, 2005, 2006, 2008
--enable-sim-build-warnings
enable SIM specific build-time compiler warnings if
gcc is used
- --enable-sim-hardware=LIST Specify the hardware to be included in the build.
+ --enable-sim-hardware=LIST
+ Specify the hardware to be included in the build.
Optional Packages:
--with-PACKAGE[=ARG] use PACKAGE [ARG=yes]
lt_dlunknown=0; lt_dlno_uscore=1; lt_dlneed_uscore=2
lt_status=$lt_dlunknown
cat > conftest.$ac_ext <<_LT_EOF
-#line 12298 "configure"
+#line 12299 "configure"
#include "confdefs.h"
#if HAVE_DLFCN_H
lt_dlunknown=0; lt_dlno_uscore=1; lt_dlneed_uscore=2
lt_status=$lt_dlunknown
cat > conftest.$ac_ext <<_LT_EOF
-#line 12404 "configure"
+#line 12405 "configure"
#include "confdefs.h"
#if HAVE_DLFCN_H
if test x"yes" != x"no"; then
- sim_hw_p=yes
+ enable_sim_hardware=yes
else
- sim_hw_p=no
+ enable_sim_hardware=no
fi
+
if test ""; then
hardware=""
else
bfin_wp \
eth_phy \
"
+
sim_hw_cflags="-DWITH_HW=1"
sim_hw="$hardware"
sim_hw_objs="\$(SIM_COMMON_HW_OBJS) `echo $sim_hw | sed -e 's/\([^ ][^ ]*\)/dv-\1.o/g'`"
+
# Check whether --enable-sim-hardware was given.
if test "${enable_sim_hardware+set}" = set; then :
enableval=$enable_sim_hardware;
-case "${enableval}" in
- yes) sim_hw_p=yes;;
- no) sim_hw_p=no;;
+fi
+
+case ${enable_sim_hardware} in
+ yes) sim_hw_p=yes;;
+ no) sim_hw_p=no;;
,*) sim_hw_p=yes; hardware="${hardware} `echo ${enableval} | sed -e 's/,/ /'`";;
*,) sim_hw_p=yes; hardware="`echo ${enableval} | sed -e 's/,/ /'` ${hardware}";;
- *) sim_hw_p=yes; hardware="`echo ${enableval} | sed -e 's/,/ /'`"'';;
+ *) sim_hw_p=yes; hardware="`echo ${enableval} | sed -e 's/,/ /'`"'';;
esac
+
if test "$sim_hw_p" != yes; then
+ if test "yes" = "always"; then
+ as_fn_error "Sorry, but this simulator requires that hardware support
+be enabled. Please configure without --disable-hw-support." "$LINENO" 5
+ fi
sim_hw_objs=
sim_hw_cflags="-DWITH_HW=0"
sim_hw=
;;
esac
-fi
-if test x"$silent" != x"yes" && test "$sim_hw_p" = "yes"; then
- echo "Setting hardware to $sim_hw_cflags, $sim_hw, $sim_hw_objs"
-fi
-else
-
-if test "$sim_hw_p" != yes; then
- if test "yes" = "always"; then
- as_fn_error "Sorry, but this simulator requires that hardware support
-be enabled. Please configure without --disable-hw-support." "$LINENO" 5
+ if test x"$silent" != x"yes"; then
+ echo "Setting hardware to $sim_hw_cflags, $sim_hw, $sim_hw_objs"
fi
- sim_hw_objs=
- sim_hw_cflags="-DWITH_HW=0"
- sim_hw=
-fi
-if test x"$silent" != x"yes"; then
- echo "Setting hardware to $sim_hw_cflags, $sim_hw, $sim_hw_objs"
-fi
-fi
-
-case " $hardware " in
- *" cfi "*) { $as_echo "$as_me:${as_lineno-$LINENO}: checking for log2 in -lm" >&5
+ case " $hardware " in
+ *" cfi "*) { $as_echo "$as_me:${as_lineno-$LINENO}: checking for log2 in -lm" >&5
$as_echo_n "checking for log2 in -lm... " >&6; }
if test "${ac_cv_lib_m_log2+set}" = set; then :
$as_echo_n "(cached) " >&6
fi
;;
-esac
+ esac
+fi
for ac_func in getuid getgid geteuid getegid setuid setgid mmap munmap kill pread
+2013-03-26 Mike Frysinger <vapier@gentoo.org>
+
+ * acinclude.m4: Regenerate.
+
2013-03-23 Joel Sherrill <joel.sherrill@oarcorp.com>
* acinclude.m4: Add SIM_DV_SOCKSER_O which is empty on hosts
AC_DEFUN([SIM_AC_OPTION_HARDWARE],
[
if test x"[$1]" != x"no"; then
- sim_hw_p=yes
+ enable_sim_hardware=yes
else
- sim_hw_p=no
+ enable_sim_hardware=no
fi
+
if test "[$2]"; then
hardware="[$2]"
else
hardware="cfi core pal glue"
fi
hardware="$hardware [$3]"
+
sim_hw_cflags="-DWITH_HW=1"
sim_hw="$hardware"
sim_hw_objs="\$(SIM_COMMON_HW_OBJS) `echo $sim_hw | sed -e 's/\([[^ ]][[^ ]]*\)/dv-\1.o/g'`"
+
AC_ARG_ENABLE(sim-hardware,
-[ --enable-sim-hardware=LIST Specify the hardware to be included in the build.],
-[
-case "${enableval}" in
- yes) sim_hw_p=yes;;
- no) sim_hw_p=no;;
+ [AS_HELP_STRING([--enable-sim-hardware=LIST],
+ [Specify the hardware to be included in the build.])])
+case ${enable_sim_hardware} in
+ yes) sim_hw_p=yes;;
+ no) sim_hw_p=no;;
,*) sim_hw_p=yes; hardware="${hardware} `echo ${enableval} | sed -e 's/,/ /'`";;
*,) sim_hw_p=yes; hardware="`echo ${enableval} | sed -e 's/,/ /'` ${hardware}";;
- *) sim_hw_p=yes; hardware="`echo ${enableval} | sed -e 's/,/ /'`"'';;
+ *) sim_hw_p=yes; hardware="`echo ${enableval} | sed -e 's/,/ /'`"'';;
esac
+
if test "$sim_hw_p" != yes; then
+ if test "[$1]" = "always"; then
+ AC_MSG_ERROR([Sorry, but this simulator requires that hardware support
+be enabled. Please configure without --disable-hw-support.])
+ fi
sim_hw_objs=
sim_hw_cflags="-DWITH_HW=0"
sim_hw=
;;
esac
AC_SUBST(SIM_DV_SOCKSER_O)
-fi
-if test x"$silent" != x"yes" && test "$sim_hw_p" = "yes"; then
- echo "Setting hardware to $sim_hw_cflags, $sim_hw, $sim_hw_objs"
-fi],[
-if test "$sim_hw_p" != yes; then
- if test "[$1]" = "always"; then
- AC_MSG_ERROR([Sorry, but this simulator requires that hardware support
-be enabled. Please configure without --disable-hw-support.])
+ if test x"$silent" != x"yes"; then
+ echo "Setting hardware to $sim_hw_cflags, $sim_hw, $sim_hw_objs"
fi
- sim_hw_objs=
- sim_hw_cflags="-DWITH_HW=0"
- sim_hw=
+ dnl Some devices require extra libraries.
+ case " $hardware " in
+ *" cfi "*) AC_CHECK_LIB(m, log2);;
+ esac
fi
-if test x"$silent" != x"yes"; then
- echo "Setting hardware to $sim_hw_cflags, $sim_hw, $sim_hw_objs"
-fi])
-dnl Some devices require extra libraries.
-case " $hardware " in
- *" cfi "*) AC_CHECK_LIB(m, log2);;
-esac
])
AC_SUBST(sim_hw_cflags)
AC_SUBST(sim_hw_objs)
+2013-03-26 Mike Frysinger <vapier@gentoo.org>
+
+ * configure: Regenerate.
+
2012-06-15 Joel Brobecker <brobecker@adacore.com>
* config.in, configure: Regenerate.
cgen
cgendir
CGEN_MAINT
+SIM_DV_SOCKSER_O
REPORT_BUGS_TEXI
REPORT_BUGS_TO
PKGVERSION
--enable-sim-build-warnings
enable SIM specific build-time compiler warnings if
gcc is used
- --enable-sim-hardware=LIST Specify the hardware to be included in the build.
+ --enable-sim-hardware=LIST
+ Specify the hardware to be included in the build.
--enable-sim-default-model=model Specify default model to simulate.
--enable-sim-environment=environment Specify mixed, user, virtual or operating environment.
--enable-sim-inline=inlines Specify which functions should be inlined.
lt_dlunknown=0; lt_dlno_uscore=1; lt_dlneed_uscore=2
lt_status=$lt_dlunknown
cat > conftest.$ac_ext <<_LT_EOF
-#line 12284 "configure"
+#line 12286 "configure"
#include "confdefs.h"
#if HAVE_DLFCN_H
lt_dlunknown=0; lt_dlno_uscore=1; lt_dlneed_uscore=2
lt_status=$lt_dlunknown
cat > conftest.$ac_ext <<_LT_EOF
-#line 12390 "configure"
+#line 12392 "configure"
#include "confdefs.h"
#if HAVE_DLFCN_H
fi
-if test x"no" = x"yes"; then
- sim_hw_p=yes
+if test x"no" != x"no"; then
+ enable_sim_hardware=yes
else
- sim_hw_p=no
+ enable_sim_hardware=no
fi
+
if test ""; then
hardware=""
else
hardware="cfi core pal glue"
fi
hardware="$hardware rv cris"
+
sim_hw_cflags="-DWITH_HW=1"
sim_hw="$hardware"
sim_hw_objs="\$(SIM_COMMON_HW_OBJS) `echo $sim_hw | sed -e 's/\([^ ][^ ]*\)/dv-\1.o/g'`"
+
# Check whether --enable-sim-hardware was given.
if test "${enable_sim_hardware+set}" = set; then :
enableval=$enable_sim_hardware;
-case "${enableval}" in
- yes) sim_hw_p=yes;;
- no) sim_hw_p=no;;
+fi
+
+case ${enable_sim_hardware} in
+ yes) sim_hw_p=yes;;
+ no) sim_hw_p=no;;
,*) sim_hw_p=yes; hardware="${hardware} `echo ${enableval} | sed -e 's/,/ /'`";;
*,) sim_hw_p=yes; hardware="`echo ${enableval} | sed -e 's/,/ /'` ${hardware}";;
- *) sim_hw_p=yes; hardware="`echo ${enableval} | sed -e 's/,/ /'`"'';;
+ *) sim_hw_p=yes; hardware="`echo ${enableval} | sed -e 's/,/ /'`"'';;
esac
+
if test "$sim_hw_p" != yes; then
+ if test "no" = "always"; then
+ as_fn_error "Sorry, but this simulator requires that hardware support
+be enabled. Please configure without --disable-hw-support." "$LINENO" 5
+ fi
sim_hw_objs=
sim_hw_cflags="-DWITH_HW=0"
sim_hw=
*) sim_hw="$sim_hw $i" ; sim_hw_objs="$sim_hw_objs dv-$i.o";;
esac
done
-fi
-if test x"$silent" != x"yes" && test "$sim_hw_p" = "yes"; then
- echo "Setting hardware to $sim_hw_cflags, $sim_hw, $sim_hw_objs"
-fi
-else
+ # mingw does not support sockser
+ SIM_DV_SOCKSER_O=""
+ case ${host} in
+ *mingw*) ;;
+ *) SIM_DV_SOCKSER_O="dv-sockser.o"
-if test "$sim_hw_p" != yes; then
- sim_hw_objs=
- sim_hw_cflags="-DWITH_HW=0"
- sim_hw=
-fi
-if test x"$silent" != x"yes"; then
- echo "Setting hardware to $sim_hw_cflags, $sim_hw, $sim_hw_objs"
-fi
-fi
+cat >>confdefs.h <<_ACEOF
+#define HAVE_DV_SOCKSER 1
+_ACEOF
-case " $hardware " in
- *" cfi "*) { $as_echo "$as_me:${as_lineno-$LINENO}: checking for log2 in -lm" >&5
+ ;;
+ esac
+
+ if test x"$silent" != x"yes"; then
+ echo "Setting hardware to $sim_hw_cflags, $sim_hw, $sim_hw_objs"
+ fi
+ case " $hardware " in
+ *" cfi "*) { $as_echo "$as_me:${as_lineno-$LINENO}: checking for log2 in -lm" >&5
$as_echo_n "checking for log2 in -lm... " >&6; }
if test "${ac_cv_lib_m_log2+set}" = set; then :
$as_echo_n "(cached) " >&6
fi
;;
-esac
+ esac
+fi
# The default model shouldn't matter as long as there's a BFD.
+2013-03-26 Mike Frysinger <vapier@gentoo.org>
+
+ * configure: Regenerate.
+
2013-03-23 Joel Sherrill <joel.sherrill@oarcorp.com>
* configure.ac: Fail if dv-sockser.o not available.
--enable-sim-environment=environment Specify mixed, user, virtual or operating environment.
--enable-cgen-maint=DIR build cgen generated files
--enable-sim-trapdump Make unknown traps dump the registers
- --enable-sim-hardware=LIST Specify the hardware to be included in the build.
+ --enable-sim-hardware=LIST
+ Specify the hardware to be included in the build.
Optional Packages:
--with-PACKAGE[=ARG] use PACKAGE [ARG=yes]
lt_dlunknown=0; lt_dlno_uscore=1; lt_dlneed_uscore=2
lt_status=$lt_dlunknown
cat > conftest.$ac_ext <<_LT_EOF
-#line 12280 "configure"
+#line 12281 "configure"
#include "confdefs.h"
#if HAVE_DLFCN_H
lt_dlunknown=0; lt_dlno_uscore=1; lt_dlneed_uscore=2
lt_status=$lt_dlunknown
cat > conftest.$ac_ext <<_LT_EOF
-#line 12386 "configure"
+#line 12387 "configure"
#include "confdefs.h"
#if HAVE_DLFCN_H
if test x"always" != x"no"; then
- sim_hw_p=yes
+ enable_sim_hardware=yes
else
- sim_hw_p=no
+ enable_sim_hardware=no
fi
+
if test """"; then
hardware=""""
else
hardware="cfi core pal glue"
fi
hardware="$hardware """
+
sim_hw_cflags="-DWITH_HW=1"
sim_hw="$hardware"
sim_hw_objs="\$(SIM_COMMON_HW_OBJS) `echo $sim_hw | sed -e 's/\([^ ][^ ]*\)/dv-\1.o/g'`"
+
# Check whether --enable-sim-hardware was given.
if test "${enable_sim_hardware+set}" = set; then :
enableval=$enable_sim_hardware;
-case "${enableval}" in
- yes) sim_hw_p=yes;;
- no) sim_hw_p=no;;
+fi
+
+case ${enable_sim_hardware} in
+ yes) sim_hw_p=yes;;
+ no) sim_hw_p=no;;
,*) sim_hw_p=yes; hardware="${hardware} `echo ${enableval} | sed -e 's/,/ /'`";;
*,) sim_hw_p=yes; hardware="`echo ${enableval} | sed -e 's/,/ /'` ${hardware}";;
- *) sim_hw_p=yes; hardware="`echo ${enableval} | sed -e 's/,/ /'`"'';;
+ *) sim_hw_p=yes; hardware="`echo ${enableval} | sed -e 's/,/ /'`"'';;
esac
+
if test "$sim_hw_p" != yes; then
+ if test "always" = "always"; then
+ as_fn_error "Sorry, but this simulator requires that hardware support
+be enabled. Please configure without --disable-hw-support." "$LINENO" 5
+ fi
sim_hw_objs=
sim_hw_cflags="-DWITH_HW=0"
sim_hw=
;;
esac
-fi
-if test x"$silent" != x"yes" && test "$sim_hw_p" = "yes"; then
- echo "Setting hardware to $sim_hw_cflags, $sim_hw, $sim_hw_objs"
-fi
-else
-
-if test "$sim_hw_p" != yes; then
- if test "always" = "always"; then
- as_fn_error "Sorry, but this simulator requires that hardware support
-be enabled. Please configure without --disable-hw-support." "$LINENO" 5
+ if test x"$silent" != x"yes"; then
+ echo "Setting hardware to $sim_hw_cflags, $sim_hw, $sim_hw_objs"
fi
- sim_hw_objs=
- sim_hw_cflags="-DWITH_HW=0"
- sim_hw=
-fi
-if test x"$silent" != x"yes"; then
- echo "Setting hardware to $sim_hw_cflags, $sim_hw, $sim_hw_objs"
-fi
-fi
-
-case " $hardware " in
- *" cfi "*) { $as_echo "$as_me:${as_lineno-$LINENO}: checking for log2 in -lm" >&5
+ case " $hardware " in
+ *" cfi "*) { $as_echo "$as_me:${as_lineno-$LINENO}: checking for log2 in -lm" >&5
$as_echo_n "checking for log2 in -lm... " >&6; }
if test "${ac_cv_lib_m_log2+set}" = set; then :
$as_echo_n "(cached) " >&6
fi
;;
-esac
+ esac
+fi
if test -z "$SIM_DV_SOCKSER_O"; then
+2013-03-26 Mike Frysinger <vapier@gentoo.org>
+
+ * configure: Regenerate.
+
2013-03-23 Joel Sherrill <joel.sherrill@oarcorp.com>
* configure.ac: Fail if dv-sockser.o not available.
--enable-sim-environment=environment Specify mixed, user, virtual or operating environment.
--enable-sim-inline=inlines Specify which functions should be inlined.
--enable-cgen-maint=DIR build cgen generated files
- --enable-sim-hardware=LIST Specify the hardware to be included in the build.
+ --enable-sim-hardware=LIST
+ Specify the hardware to be included in the build.
Optional Packages:
--with-PACKAGE[=ARG] use PACKAGE [ARG=yes]
lt_dlunknown=0; lt_dlno_uscore=1; lt_dlneed_uscore=2
lt_status=$lt_dlunknown
cat > conftest.$ac_ext <<_LT_EOF
-#line 12279 "configure"
+#line 12280 "configure"
#include "confdefs.h"
#if HAVE_DLFCN_H
lt_dlunknown=0; lt_dlno_uscore=1; lt_dlneed_uscore=2
lt_status=$lt_dlunknown
cat > conftest.$ac_ext <<_LT_EOF
-#line 12385 "configure"
+#line 12386 "configure"
#include "confdefs.h"
#if HAVE_DLFCN_H
if test x"always" != x"no"; then
- sim_hw_p=yes
+ enable_sim_hardware=yes
else
- sim_hw_p=no
+ enable_sim_hardware=no
fi
+
if test """"; then
hardware=""""
else
hardware="cfi core pal glue"
fi
hardware="$hardware """
+
sim_hw_cflags="-DWITH_HW=1"
sim_hw="$hardware"
sim_hw_objs="\$(SIM_COMMON_HW_OBJS) `echo $sim_hw | sed -e 's/\([^ ][^ ]*\)/dv-\1.o/g'`"
+
# Check whether --enable-sim-hardware was given.
if test "${enable_sim_hardware+set}" = set; then :
enableval=$enable_sim_hardware;
-case "${enableval}" in
- yes) sim_hw_p=yes;;
- no) sim_hw_p=no;;
+fi
+
+case ${enable_sim_hardware} in
+ yes) sim_hw_p=yes;;
+ no) sim_hw_p=no;;
,*) sim_hw_p=yes; hardware="${hardware} `echo ${enableval} | sed -e 's/,/ /'`";;
*,) sim_hw_p=yes; hardware="`echo ${enableval} | sed -e 's/,/ /'` ${hardware}";;
- *) sim_hw_p=yes; hardware="`echo ${enableval} | sed -e 's/,/ /'`"'';;
+ *) sim_hw_p=yes; hardware="`echo ${enableval} | sed -e 's/,/ /'`"'';;
esac
+
if test "$sim_hw_p" != yes; then
+ if test "always" = "always"; then
+ as_fn_error "Sorry, but this simulator requires that hardware support
+be enabled. Please configure without --disable-hw-support." "$LINENO" 5
+ fi
sim_hw_objs=
sim_hw_cflags="-DWITH_HW=0"
sim_hw=
;;
esac
-fi
-if test x"$silent" != x"yes" && test "$sim_hw_p" = "yes"; then
- echo "Setting hardware to $sim_hw_cflags, $sim_hw, $sim_hw_objs"
-fi
-else
-
-if test "$sim_hw_p" != yes; then
- if test "always" = "always"; then
- as_fn_error "Sorry, but this simulator requires that hardware support
-be enabled. Please configure without --disable-hw-support." "$LINENO" 5
+ if test x"$silent" != x"yes"; then
+ echo "Setting hardware to $sim_hw_cflags, $sim_hw, $sim_hw_objs"
fi
- sim_hw_objs=
- sim_hw_cflags="-DWITH_HW=0"
- sim_hw=
-fi
-if test x"$silent" != x"yes"; then
- echo "Setting hardware to $sim_hw_cflags, $sim_hw, $sim_hw_objs"
-fi
-fi
-
-case " $hardware " in
- *" cfi "*) { $as_echo "$as_me:${as_lineno-$LINENO}: checking for log2 in -lm" >&5
+ case " $hardware " in
+ *" cfi "*) { $as_echo "$as_me:${as_lineno-$LINENO}: checking for log2 in -lm" >&5
$as_echo_n "checking for log2 in -lm... " >&6; }
if test "${ac_cv_lib_m_log2+set}" = set; then :
$as_echo_n "(cached) " >&6
fi
;;
-esac
+ esac
+fi
if test -z "$SIM_DV_SOCKSER_O"; then
+2013-03-26 Mike Frysinger <vapier@gentoo.org>
+
+ * configure: Regenerate.
+
2012-06-15 Joel Brobecker <brobecker@adacore.com>
* config.in, configure: Regenerate.
ac_subst_vars='LTLIBOBJS
LIBOBJS
cgen_breaks
+SIM_DV_SOCKSER_O
cgen
cgendir
CGEN_MAINT
--enable-sim-default-model=model Specify default model to simulate.
--enable-sim-environment=environment Specify mixed, user, virtual or operating environment.
--enable-cgen-maint=DIR build cgen generated files
- --enable-sim-hardware=LIST Specify the hardware to be included in the build.
+ --enable-sim-hardware=LIST
+ Specify the hardware to be included in the build.
Optional Packages:
--with-PACKAGE[=ARG] use PACKAGE [ARG=yes]
lt_dlunknown=0; lt_dlno_uscore=1; lt_dlneed_uscore=2
lt_status=$lt_dlunknown
cat > conftest.$ac_ext <<_LT_EOF
-#line 12276 "configure"
+#line 12278 "configure"
#include "confdefs.h"
#if HAVE_DLFCN_H
lt_dlunknown=0; lt_dlno_uscore=1; lt_dlneed_uscore=2
lt_status=$lt_dlunknown
cat > conftest.$ac_ext <<_LT_EOF
-#line 12382 "configure"
+#line 12384 "configure"
#include "confdefs.h"
#if HAVE_DLFCN_H
-if test x"yes" = x"yes"; then
- sim_hw_p=yes
+if test x"yes" != x"no"; then
+ enable_sim_hardware=yes
else
- sim_hw_p=no
+ enable_sim_hardware=no
fi
+
if test ""; then
hardware=""
else
hardware="cfi core pal glue"
fi
hardware="$hardware lm32cpu lm32timer lm32uart"
+
sim_hw_cflags="-DWITH_HW=1"
sim_hw="$hardware"
sim_hw_objs="\$(SIM_COMMON_HW_OBJS) `echo $sim_hw | sed -e 's/\([^ ][^ ]*\)/dv-\1.o/g'`"
+
# Check whether --enable-sim-hardware was given.
if test "${enable_sim_hardware+set}" = set; then :
enableval=$enable_sim_hardware;
-case "${enableval}" in
- yes) sim_hw_p=yes;;
- no) sim_hw_p=no;;
+fi
+
+case ${enable_sim_hardware} in
+ yes) sim_hw_p=yes;;
+ no) sim_hw_p=no;;
,*) sim_hw_p=yes; hardware="${hardware} `echo ${enableval} | sed -e 's/,/ /'`";;
*,) sim_hw_p=yes; hardware="`echo ${enableval} | sed -e 's/,/ /'` ${hardware}";;
- *) sim_hw_p=yes; hardware="`echo ${enableval} | sed -e 's/,/ /'`"'';;
+ *) sim_hw_p=yes; hardware="`echo ${enableval} | sed -e 's/,/ /'`"'';;
esac
+
if test "$sim_hw_p" != yes; then
+ if test "yes" = "always"; then
+ as_fn_error "Sorry, but this simulator requires that hardware support
+be enabled. Please configure without --disable-hw-support." "$LINENO" 5
+ fi
sim_hw_objs=
sim_hw_cflags="-DWITH_HW=0"
sim_hw=
*) sim_hw="$sim_hw $i" ; sim_hw_objs="$sim_hw_objs dv-$i.o";;
esac
done
-fi
-if test x"$silent" != x"yes" && test "$sim_hw_p" = "yes"; then
- echo "Setting hardware to $sim_hw_cflags, $sim_hw, $sim_hw_objs"
-fi
-else
+ # mingw does not support sockser
+ SIM_DV_SOCKSER_O=""
+ case ${host} in
+ *mingw*) ;;
+ *) SIM_DV_SOCKSER_O="dv-sockser.o"
-if test "$sim_hw_p" != yes; then
- sim_hw_objs=
- sim_hw_cflags="-DWITH_HW=0"
- sim_hw=
-fi
-if test x"$silent" != x"yes"; then
- echo "Setting hardware to $sim_hw_cflags, $sim_hw, $sim_hw_objs"
-fi
-fi
+cat >>confdefs.h <<_ACEOF
+#define HAVE_DV_SOCKSER 1
+_ACEOF
-case " $hardware " in
- *" cfi "*) { $as_echo "$as_me:${as_lineno-$LINENO}: checking for log2 in -lm" >&5
+ ;;
+ esac
+
+ if test x"$silent" != x"yes"; then
+ echo "Setting hardware to $sim_hw_cflags, $sim_hw, $sim_hw_objs"
+ fi
+ case " $hardware " in
+ *" cfi "*) { $as_echo "$as_me:${as_lineno-$LINENO}: checking for log2 in -lm" >&5
$as_echo_n "checking for log2 in -lm... " >&6; }
if test "${ac_cv_lib_m_log2+set}" = set; then :
$as_echo_n "(cached) " >&6
fi
;;
-esac
+ esac
+fi
+2013-03-26 Mike Frysinger <vapier@gentoo.org>
+
+ * configure: Regenerate.
+
2013-03-23 Joel Sherrill <joel.sherrill@oarcorp.com>
* configure.ac: Fail if dv-sockser.o not available.
--enable-sim-environment=environment Specify mixed, user, virtual or operating environment.
--enable-sim-inline=inlines Specify which functions should be inlined.
--enable-cgen-maint=DIR build cgen generated files
- --enable-sim-hardware=LIST Specify the hardware to be included in the build.
+ --enable-sim-hardware=LIST
+ Specify the hardware to be included in the build.
Optional Packages:
--with-PACKAGE[=ARG] use PACKAGE [ARG=yes]
lt_dlunknown=0; lt_dlno_uscore=1; lt_dlneed_uscore=2
lt_status=$lt_dlunknown
cat > conftest.$ac_ext <<_LT_EOF
-#line 12281 "configure"
+#line 12282 "configure"
#include "confdefs.h"
#if HAVE_DLFCN_H
lt_dlunknown=0; lt_dlno_uscore=1; lt_dlneed_uscore=2
lt_status=$lt_dlunknown
cat > conftest.$ac_ext <<_LT_EOF
-#line 12387 "configure"
+#line 12388 "configure"
#include "confdefs.h"
#if HAVE_DLFCN_H
if test x"always" != x"no"; then
- sim_hw_p=yes
+ enable_sim_hardware=yes
else
- sim_hw_p=no
+ enable_sim_hardware=no
fi
+
if test """"; then
hardware=""""
else
hardware="cfi core pal glue"
fi
hardware="$hardware """
+
sim_hw_cflags="-DWITH_HW=1"
sim_hw="$hardware"
sim_hw_objs="\$(SIM_COMMON_HW_OBJS) `echo $sim_hw | sed -e 's/\([^ ][^ ]*\)/dv-\1.o/g'`"
+
# Check whether --enable-sim-hardware was given.
if test "${enable_sim_hardware+set}" = set; then :
enableval=$enable_sim_hardware;
-case "${enableval}" in
- yes) sim_hw_p=yes;;
- no) sim_hw_p=no;;
+fi
+
+case ${enable_sim_hardware} in
+ yes) sim_hw_p=yes;;
+ no) sim_hw_p=no;;
,*) sim_hw_p=yes; hardware="${hardware} `echo ${enableval} | sed -e 's/,/ /'`";;
*,) sim_hw_p=yes; hardware="`echo ${enableval} | sed -e 's/,/ /'` ${hardware}";;
- *) sim_hw_p=yes; hardware="`echo ${enableval} | sed -e 's/,/ /'`"'';;
+ *) sim_hw_p=yes; hardware="`echo ${enableval} | sed -e 's/,/ /'`"'';;
esac
+
if test "$sim_hw_p" != yes; then
+ if test "always" = "always"; then
+ as_fn_error "Sorry, but this simulator requires that hardware support
+be enabled. Please configure without --disable-hw-support." "$LINENO" 5
+ fi
sim_hw_objs=
sim_hw_cflags="-DWITH_HW=0"
sim_hw=
;;
esac
-fi
-if test x"$silent" != x"yes" && test "$sim_hw_p" = "yes"; then
- echo "Setting hardware to $sim_hw_cflags, $sim_hw, $sim_hw_objs"
-fi
-else
-
-if test "$sim_hw_p" != yes; then
- if test "always" = "always"; then
- as_fn_error "Sorry, but this simulator requires that hardware support
-be enabled. Please configure without --disable-hw-support." "$LINENO" 5
+ if test x"$silent" != x"yes"; then
+ echo "Setting hardware to $sim_hw_cflags, $sim_hw, $sim_hw_objs"
fi
- sim_hw_objs=
- sim_hw_cflags="-DWITH_HW=0"
- sim_hw=
-fi
-if test x"$silent" != x"yes"; then
- echo "Setting hardware to $sim_hw_cflags, $sim_hw, $sim_hw_objs"
-fi
-fi
-
-case " $hardware " in
- *" cfi "*) { $as_echo "$as_me:${as_lineno-$LINENO}: checking for log2 in -lm" >&5
+ case " $hardware " in
+ *" cfi "*) { $as_echo "$as_me:${as_lineno-$LINENO}: checking for log2 in -lm" >&5
$as_echo_n "checking for log2 in -lm... " >&6; }
if test "${ac_cv_lib_m_log2+set}" = set; then :
$as_echo_n "(cached) " >&6
fi
;;
-esac
+ esac
+fi
if test -z "$SIM_DV_SOCKSER_O"; then
+2013-03-26 Mike Frysinger <vapier@gentoo.org>
+
+ * configure: Regenerate.
+
2013-03-23 Joel Sherrill <joel.sherrill@oarcorp.com>
* configure.ac: Use $SIM_DV_SOCKSER_O.
LIBOBJS
cgen_breaks
m68hc11_extra_objs
+SIM_DV_SOCKSER_O
REPORT_BUGS_TEXI
REPORT_BUGS_TO
PKGVERSION
--enable-sim-build-warnings
enable SIM specific build-time compiler warnings if
gcc is used
- --enable-sim-hardware=LIST Specify the hardware to be included in the build.
+ --enable-sim-hardware=LIST
+ Specify the hardware to be included in the build.
Optional Packages:
--with-PACKAGE[=ARG] use PACKAGE [ARG=yes]
lt_dlunknown=0; lt_dlno_uscore=1; lt_dlneed_uscore=2
lt_status=$lt_dlunknown
cat > conftest.$ac_ext <<_LT_EOF
-#line 12274 "configure"
+#line 12276 "configure"
#include "confdefs.h"
#if HAVE_DLFCN_H
lt_dlunknown=0; lt_dlno_uscore=1; lt_dlneed_uscore=2
lt_status=$lt_dlunknown
cat > conftest.$ac_ext <<_LT_EOF
-#line 12380 "configure"
+#line 12382 "configure"
#include "confdefs.h"
#if HAVE_DLFCN_H
m68hc11-*-*|m6811-*-*)
hw_enabled=yes
hw_extra_devices="m68hc11 m68hc11sio m68hc11eepr m68hc11tim m68hc11spi nvram"
- m68hc11_extra_objs="dv-sockser.o"
SIM_SUBTARGET="$SIM_SUBTARGET -DTARGET_M68HC11=1"
;;
*)
;;
esac
-if test x"$hw_enabled" = x"yes"; then
- sim_hw_p=yes
+if test x"$hw_enabled" != x"no"; then
+ enable_sim_hardware=yes
else
- sim_hw_p=no
+ enable_sim_hardware=no
fi
+
if test "$hw_devices"; then
hardware="$hw_devices"
else
hardware="cfi core pal glue"
fi
hardware="$hardware $hw_extra_devices"
+
sim_hw_cflags="-DWITH_HW=1"
sim_hw="$hardware"
sim_hw_objs="\$(SIM_COMMON_HW_OBJS) `echo $sim_hw | sed -e 's/\([^ ][^ ]*\)/dv-\1.o/g'`"
+
# Check whether --enable-sim-hardware was given.
if test "${enable_sim_hardware+set}" = set; then :
enableval=$enable_sim_hardware;
-case "${enableval}" in
- yes) sim_hw_p=yes;;
- no) sim_hw_p=no;;
+fi
+
+case ${enable_sim_hardware} in
+ yes) sim_hw_p=yes;;
+ no) sim_hw_p=no;;
,*) sim_hw_p=yes; hardware="${hardware} `echo ${enableval} | sed -e 's/,/ /'`";;
*,) sim_hw_p=yes; hardware="`echo ${enableval} | sed -e 's/,/ /'` ${hardware}";;
- *) sim_hw_p=yes; hardware="`echo ${enableval} | sed -e 's/,/ /'`"'';;
+ *) sim_hw_p=yes; hardware="`echo ${enableval} | sed -e 's/,/ /'`"'';;
esac
+
if test "$sim_hw_p" != yes; then
+ if test "$hw_enabled" = "always"; then
+ as_fn_error "Sorry, but this simulator requires that hardware support
+be enabled. Please configure without --disable-hw-support." "$LINENO" 5
+ fi
sim_hw_objs=
sim_hw_cflags="-DWITH_HW=0"
sim_hw=
*) sim_hw="$sim_hw $i" ; sim_hw_objs="$sim_hw_objs dv-$i.o";;
esac
done
-fi
-if test x"$silent" != x"yes" && test "$sim_hw_p" = "yes"; then
- echo "Setting hardware to $sim_hw_cflags, $sim_hw, $sim_hw_objs"
-fi
-else
+ # mingw does not support sockser
+ SIM_DV_SOCKSER_O=""
+ case ${host} in
+ *mingw*) ;;
+ *) SIM_DV_SOCKSER_O="dv-sockser.o"
-if test "$sim_hw_p" != yes; then
- sim_hw_objs=
- sim_hw_cflags="-DWITH_HW=0"
- sim_hw=
-fi
-if test x"$silent" != x"yes"; then
- echo "Setting hardware to $sim_hw_cflags, $sim_hw, $sim_hw_objs"
-fi
-fi
+cat >>confdefs.h <<_ACEOF
+#define HAVE_DV_SOCKSER 1
+_ACEOF
-case " $hardware " in
- *" cfi "*) { $as_echo "$as_me:${as_lineno-$LINENO}: checking for log2 in -lm" >&5
+ ;;
+ esac
+
+ if test x"$silent" != x"yes"; then
+ echo "Setting hardware to $sim_hw_cflags, $sim_hw, $sim_hw_objs"
+ fi
+ case " $hardware " in
+ *" cfi "*) { $as_echo "$as_me:${as_lineno-$LINENO}: checking for log2 in -lm" >&5
$as_echo_n "checking for log2 in -lm... " >&6; }
if test "${ac_cv_lib_m_log2+set}" = set; then :
$as_echo_n "(cached) " >&6
fi
;;
-esac
+ esac
+fi
for ac_header in string.h strings.h stdlib.h stdlib.h fcntl.h
done
+m68hc11_extra_objs="$SIM_DV_SOCKSER_O"
+2013-03-26 Mike Frysinger <vapier@gentoo.org>
+
+ * configure: Regenerate.
+
2013-03-23 Joel Sherrill <joel.sherrill@oarcorp.com>
* configure.ac: Address use of dv-sockser.o.
--enable-sim-bitsize=N Specify target bitsize (32 or 64).
--enable-sim-float Specify that the target processor has floating point hardware.
--enable-sim-smp=n Specify number of processors to configure for (default ${default_sim_smp}).
- --enable-sim-hardware=LIST Specify the hardware to be included in the build.
+ --enable-sim-hardware=LIST
+ Specify the hardware to be included in the build.
Optional Packages:
--with-PACKAGE[=ARG] use PACKAGE [ARG=yes]
lt_dlunknown=0; lt_dlno_uscore=1; lt_dlneed_uscore=2
lt_status=$lt_dlunknown
cat > conftest.$ac_ext <<_LT_EOF
-#line 12304 "configure"
+#line 12305 "configure"
#include "confdefs.h"
#if HAVE_DLFCN_H
lt_dlunknown=0; lt_dlno_uscore=1; lt_dlneed_uscore=2
lt_status=$lt_dlunknown
cat > conftest.$ac_ext <<_LT_EOF
-#line 12410 "configure"
+#line 12411 "configure"
#include "confdefs.h"
#if HAVE_DLFCN_H
esac
if test x"$hw_enabled" != x"no"; then
- sim_hw_p=yes
+ enable_sim_hardware=yes
else
- sim_hw_p=no
+ enable_sim_hardware=no
fi
+
if test "$hw_devices"; then
hardware="$hw_devices"
else
hardware="cfi core pal glue"
fi
hardware="$hardware $hw_extra_devices"
+
sim_hw_cflags="-DWITH_HW=1"
sim_hw="$hardware"
sim_hw_objs="\$(SIM_COMMON_HW_OBJS) `echo $sim_hw | sed -e 's/\([^ ][^ ]*\)/dv-\1.o/g'`"
+
# Check whether --enable-sim-hardware was given.
if test "${enable_sim_hardware+set}" = set; then :
enableval=$enable_sim_hardware;
-case "${enableval}" in
- yes) sim_hw_p=yes;;
- no) sim_hw_p=no;;
+fi
+
+case ${enable_sim_hardware} in
+ yes) sim_hw_p=yes;;
+ no) sim_hw_p=no;;
,*) sim_hw_p=yes; hardware="${hardware} `echo ${enableval} | sed -e 's/,/ /'`";;
*,) sim_hw_p=yes; hardware="`echo ${enableval} | sed -e 's/,/ /'` ${hardware}";;
- *) sim_hw_p=yes; hardware="`echo ${enableval} | sed -e 's/,/ /'`"'';;
+ *) sim_hw_p=yes; hardware="`echo ${enableval} | sed -e 's/,/ /'`"'';;
esac
+
if test "$sim_hw_p" != yes; then
+ if test "$hw_enabled" = "always"; then
+ as_fn_error "Sorry, but this simulator requires that hardware support
+be enabled. Please configure without --disable-hw-support." "$LINENO" 5
+ fi
sim_hw_objs=
sim_hw_cflags="-DWITH_HW=0"
sim_hw=
;;
esac
-fi
-if test x"$silent" != x"yes" && test "$sim_hw_p" = "yes"; then
- echo "Setting hardware to $sim_hw_cflags, $sim_hw, $sim_hw_objs"
-fi
-else
-
-if test "$sim_hw_p" != yes; then
- if test "$hw_enabled" = "always"; then
- as_fn_error "Sorry, but this simulator requires that hardware support
-be enabled. Please configure without --disable-hw-support." "$LINENO" 5
+ if test x"$silent" != x"yes"; then
+ echo "Setting hardware to $sim_hw_cflags, $sim_hw, $sim_hw_objs"
fi
- sim_hw_objs=
- sim_hw_cflags="-DWITH_HW=0"
- sim_hw=
-fi
-if test x"$silent" != x"yes"; then
- echo "Setting hardware to $sim_hw_cflags, $sim_hw, $sim_hw_objs"
-fi
-fi
-
-case " $hardware " in
- *" cfi "*) { $as_echo "$as_me:${as_lineno-$LINENO}: checking for log2 in -lm" >&5
+ case " $hardware " in
+ *" cfi "*) { $as_echo "$as_me:${as_lineno-$LINENO}: checking for log2 in -lm" >&5
$as_echo_n "checking for log2 in -lm... " >&6; }
if test "${ac_cv_lib_m_log2+set}" = set; then :
$as_echo_n "(cached) " >&6
fi
;;
-esac
+ esac
+fi
mips_extra_objs="$SIM_DV_SOCKSER_O"
+2013-03-26 Mike Frysinger <vapier@gentoo.org>
+
+ * configure: Regenerate.
+
2013-03-23 Joel Sherrill <joel.sherrill@oarcorp.com>
* configure.ac: Fail if dv-sockser.o not available.
--enable-sim-reserved-bits Specify whether to check reserved bits in instruction.
--enable-sim-bitsize=N Specify target bitsize (32 or 64).
--enable-sim-inline=inlines Specify which functions should be inlined.
- --enable-sim-hardware=LIST Specify the hardware to be included in the build.
+ --enable-sim-hardware=LIST
+ Specify the hardware to be included in the build.
Optional Packages:
--with-PACKAGE[=ARG] use PACKAGE [ARG=yes]
lt_dlunknown=0; lt_dlno_uscore=1; lt_dlneed_uscore=2
lt_status=$lt_dlunknown
cat > conftest.$ac_ext <<_LT_EOF
-#line 12280 "configure"
+#line 12281 "configure"
#include "confdefs.h"
#if HAVE_DLFCN_H
lt_dlunknown=0; lt_dlno_uscore=1; lt_dlneed_uscore=2
lt_status=$lt_dlunknown
cat > conftest.$ac_ext <<_LT_EOF
-#line 12386 "configure"
+#line 12387 "configure"
#include "confdefs.h"
#if HAVE_DLFCN_H
if test x"yes" != x"no"; then
- sim_hw_p=yes
+ enable_sim_hardware=yes
else
- sim_hw_p=no
+ enable_sim_hardware=no
fi
+
if test ""; then
hardware=""
else
hardware="cfi core pal glue"
fi
hardware="$hardware mn103cpu mn103int mn103tim mn103ser mn103iop"
+
sim_hw_cflags="-DWITH_HW=1"
sim_hw="$hardware"
sim_hw_objs="\$(SIM_COMMON_HW_OBJS) `echo $sim_hw | sed -e 's/\([^ ][^ ]*\)/dv-\1.o/g'`"
+
# Check whether --enable-sim-hardware was given.
if test "${enable_sim_hardware+set}" = set; then :
enableval=$enable_sim_hardware;
-case "${enableval}" in
- yes) sim_hw_p=yes;;
- no) sim_hw_p=no;;
+fi
+
+case ${enable_sim_hardware} in
+ yes) sim_hw_p=yes;;
+ no) sim_hw_p=no;;
,*) sim_hw_p=yes; hardware="${hardware} `echo ${enableval} | sed -e 's/,/ /'`";;
*,) sim_hw_p=yes; hardware="`echo ${enableval} | sed -e 's/,/ /'` ${hardware}";;
- *) sim_hw_p=yes; hardware="`echo ${enableval} | sed -e 's/,/ /'`"'';;
+ *) sim_hw_p=yes; hardware="`echo ${enableval} | sed -e 's/,/ /'`"'';;
esac
+
if test "$sim_hw_p" != yes; then
+ if test "yes" = "always"; then
+ as_fn_error "Sorry, but this simulator requires that hardware support
+be enabled. Please configure without --disable-hw-support." "$LINENO" 5
+ fi
sim_hw_objs=
sim_hw_cflags="-DWITH_HW=0"
sim_hw=
;;
esac
-fi
-if test x"$silent" != x"yes" && test "$sim_hw_p" = "yes"; then
- echo "Setting hardware to $sim_hw_cflags, $sim_hw, $sim_hw_objs"
-fi
-else
-
-if test "$sim_hw_p" != yes; then
- if test "yes" = "always"; then
- as_fn_error "Sorry, but this simulator requires that hardware support
-be enabled. Please configure without --disable-hw-support." "$LINENO" 5
+ if test x"$silent" != x"yes"; then
+ echo "Setting hardware to $sim_hw_cflags, $sim_hw, $sim_hw_objs"
fi
- sim_hw_objs=
- sim_hw_cflags="-DWITH_HW=0"
- sim_hw=
-fi
-if test x"$silent" != x"yes"; then
- echo "Setting hardware to $sim_hw_cflags, $sim_hw, $sim_hw_objs"
-fi
-fi
-
-case " $hardware " in
- *" cfi "*) { $as_echo "$as_me:${as_lineno-$LINENO}: checking for log2 in -lm" >&5
+ case " $hardware " in
+ *" cfi "*) { $as_echo "$as_me:${as_lineno-$LINENO}: checking for log2 in -lm" >&5
$as_echo_n "checking for log2 in -lm... " >&6; }
if test "${ac_cv_lib_m_log2+set}" = set; then :
$as_echo_n "(cached) " >&6
fi
;;
-esac
+ esac
+fi
for ac_func in time chmod utime fork execve execv chown
if test x"always" != x"no"; then
- sim_hw_p=yes
+ enable_sim_hardware=yes
else
- sim_hw_p=no
+ enable_sim_hardware=no
fi
+
if test """"; then
hardware=""""
else
hardware="cfi core pal glue"
fi
hardware="$hardware """
+
sim_hw_cflags="-DWITH_HW=1"
sim_hw="$hardware"
sim_hw_objs="\$(SIM_COMMON_HW_OBJS) `echo $sim_hw | sed -e 's/\([^ ][^ ]*\)/dv-\1.o/g'`"
+
# Check whether --enable-sim-hardware was given.
if test "${enable_sim_hardware+set}" = set; then :
enableval=$enable_sim_hardware;
-case "${enableval}" in
- yes) sim_hw_p=yes;;
- no) sim_hw_p=no;;
+fi
+
+case ${enable_sim_hardware} in
+ yes) sim_hw_p=yes;;
+ no) sim_hw_p=no;;
,*) sim_hw_p=yes; hardware="${hardware} `echo ${enableval} | sed -e 's/,/ /'`";;
*,) sim_hw_p=yes; hardware="`echo ${enableval} | sed -e 's/,/ /'` ${hardware}";;
- *) sim_hw_p=yes; hardware="`echo ${enableval} | sed -e 's/,/ /'`"'';;
+ *) sim_hw_p=yes; hardware="`echo ${enableval} | sed -e 's/,/ /'`"'';;
esac
+
if test "$sim_hw_p" != yes; then
+ if test "always" = "always"; then
+ as_fn_error "Sorry, but this simulator requires that hardware support
+be enabled. Please configure without --disable-hw-support." "$LINENO" 5
+ fi
sim_hw_objs=
sim_hw_cflags="-DWITH_HW=0"
sim_hw=
;;
esac
-fi
-if test x"$silent" != x"yes" && test "$sim_hw_p" = "yes"; then
- echo "Setting hardware to $sim_hw_cflags, $sim_hw, $sim_hw_objs"
-fi
-else
-
-if test "$sim_hw_p" != yes; then
- if test "always" = "always"; then
- as_fn_error "Sorry, but this simulator requires that hardware support
-be enabled. Please configure without --disable-hw-support." "$LINENO" 5
+ if test x"$silent" != x"yes"; then
+ echo "Setting hardware to $sim_hw_cflags, $sim_hw, $sim_hw_objs"
fi
- sim_hw_objs=
- sim_hw_cflags="-DWITH_HW=0"
- sim_hw=
-fi
-if test x"$silent" != x"yes"; then
- echo "Setting hardware to $sim_hw_cflags, $sim_hw, $sim_hw_objs"
-fi
-fi
-
-case " $hardware " in
- *" cfi "*) { $as_echo "$as_me:${as_lineno-$LINENO}: checking for log2 in -lm" >&5
+ case " $hardware " in
+ *" cfi "*) { $as_echo "$as_me:${as_lineno-$LINENO}: checking for log2 in -lm" >&5
$as_echo_n "checking for log2 in -lm... " >&6; }
if test "${ac_cv_lib_m_log2+set}" = set; then :
$as_echo_n "(cached) " >&6
fi
;;
-esac
+ esac
+fi
if test -z "$SIM_DV_SOCKSER_O"; then
+2013-03-26 Mike Frysinger <vapier@gentoo.org>
+
+ * configure: Regenerate.
+
2013-03-23 Joel Sherrill <joel.sherrill@oarcorp.com>
* configure.ac: Fail if dv-sockser.o not available.
--enable-sim-environment=environment Specify mixed, user, virtual or operating environment.
--enable-sim-inline=inlines Specify which functions should be inlined.
--enable-cgen-maint=DIR build cgen generated files
- --enable-sim-hardware=LIST Specify the hardware to be included in the build.
+ --enable-sim-hardware=LIST
+ Specify the hardware to be included in the build.
Optional Packages:
--with-PACKAGE[=ARG] use PACKAGE [ARG=yes]
lt_dlunknown=0; lt_dlno_uscore=1; lt_dlneed_uscore=2
lt_status=$lt_dlunknown
cat > conftest.$ac_ext <<_LT_EOF
-#line 12279 "configure"
+#line 12280 "configure"
#include "confdefs.h"
#if HAVE_DLFCN_H
lt_dlunknown=0; lt_dlno_uscore=1; lt_dlneed_uscore=2
lt_status=$lt_dlunknown
cat > conftest.$ac_ext <<_LT_EOF
-#line 12385 "configure"
+#line 12386 "configure"
#include "confdefs.h"
#if HAVE_DLFCN_H
if test x"always" != x"no"; then
- sim_hw_p=yes
+ enable_sim_hardware=yes
else
- sim_hw_p=no
+ enable_sim_hardware=no
fi
+
if test """"; then
hardware=""""
else
hardware="cfi core pal glue"
fi
hardware="$hardware """
+
sim_hw_cflags="-DWITH_HW=1"
sim_hw="$hardware"
sim_hw_objs="\$(SIM_COMMON_HW_OBJS) `echo $sim_hw | sed -e 's/\([^ ][^ ]*\)/dv-\1.o/g'`"
+
# Check whether --enable-sim-hardware was given.
if test "${enable_sim_hardware+set}" = set; then :
enableval=$enable_sim_hardware;
-case "${enableval}" in
- yes) sim_hw_p=yes;;
- no) sim_hw_p=no;;
+fi
+
+case ${enable_sim_hardware} in
+ yes) sim_hw_p=yes;;
+ no) sim_hw_p=no;;
,*) sim_hw_p=yes; hardware="${hardware} `echo ${enableval} | sed -e 's/,/ /'`";;
*,) sim_hw_p=yes; hardware="`echo ${enableval} | sed -e 's/,/ /'` ${hardware}";;
- *) sim_hw_p=yes; hardware="`echo ${enableval} | sed -e 's/,/ /'`"'';;
+ *) sim_hw_p=yes; hardware="`echo ${enableval} | sed -e 's/,/ /'`"'';;
esac
+
if test "$sim_hw_p" != yes; then
+ if test "always" = "always"; then
+ as_fn_error "Sorry, but this simulator requires that hardware support
+be enabled. Please configure without --disable-hw-support." "$LINENO" 5
+ fi
sim_hw_objs=
sim_hw_cflags="-DWITH_HW=0"
sim_hw=
;;
esac
-fi
-if test x"$silent" != x"yes" && test "$sim_hw_p" = "yes"; then
- echo "Setting hardware to $sim_hw_cflags, $sim_hw, $sim_hw_objs"
-fi
-else
-
-if test "$sim_hw_p" != yes; then
- if test "always" = "always"; then
- as_fn_error "Sorry, but this simulator requires that hardware support
-be enabled. Please configure without --disable-hw-support." "$LINENO" 5
+ if test x"$silent" != x"yes"; then
+ echo "Setting hardware to $sim_hw_cflags, $sim_hw, $sim_hw_objs"
fi
- sim_hw_objs=
- sim_hw_cflags="-DWITH_HW=0"
- sim_hw=
-fi
-if test x"$silent" != x"yes"; then
- echo "Setting hardware to $sim_hw_cflags, $sim_hw, $sim_hw_objs"
-fi
-fi
-
-case " $hardware " in
- *" cfi "*) { $as_echo "$as_me:${as_lineno-$LINENO}: checking for log2 in -lm" >&5
+ case " $hardware " in
+ *" cfi "*) { $as_echo "$as_me:${as_lineno-$LINENO}: checking for log2 in -lm" >&5
$as_echo_n "checking for log2 in -lm... " >&6; }
if test "${ac_cv_lib_m_log2+set}" = set; then :
$as_echo_n "(cached) " >&6
fi
;;
-esac
+ esac
+fi
if test -z "$SIM_DV_SOCKSER_O"; then
projects / binutils-gdb.git / commitdiff