sal = find_pc_line (func_addr, 0);
frame_info_ptr frame = get_selected_frame (nullptr);
- struct gdbarch *gdbarch = get_frame_arch (frame);
- CORE_ADDR alt_entry_point = sal.pc;
- CORE_ADDR entry_point = alt_entry_point;
- if (gdbarch_skip_entrypoint_p (gdbarch))
+ if (sal.pc != pc)
{
- /* Some architectures, like PowerPC use local and global entry points.
- There is only one Entry Point (GEP = LEP) for other architectures.
- The GEP is an alternate entry point. The LEP is the normal entry
- point. The value of entry_point was initialized to the alternate
- entry point (GEP). It will be adjusted if the normal entry point
- (LEP) was used. */
- entry_point = gdbarch_skip_entrypoint (gdbarch, entry_point);
- }
+ struct gdbarch *gdbarch = get_frame_arch (frame);
- if (alt_entry_point <= pc && pc <= entry_point)
+ /* Set a step-resume at the function's entry point. Once that's
+ hit, we'll do one more step backwards. */
+ symtab_and_line sr_sal;
+ sr_sal.pc = sal.pc;
+ sr_sal.pspace = get_frame_program_space (frame);
+ insert_step_resume_breakpoint_at_sal (gdbarch,
+ sr_sal, null_frame_id);
+ }
+ else
{
- /* We are exactly at the function entry point, or between the entry
- point on platforms that have two (like PowerPC). Note that this
+ /* We are exactly at the function entry point. Note that this
can only happen at frame #0.
When setting a step range, need to call set_step_info
/* Return using a step range so we will keep stepping back
to the first instruction in the source code line. */
- tp->control.step_range_start = alt_entry_point;
- tp->control.step_range_end = entry_point;
- }
- else
- {
- symtab_and_line sr_sal;
- /* Set a step-resume at the function's entry point. */
- sr_sal.pc = entry_point;
- sr_sal.pspace = get_frame_program_space (frame);
- insert_step_resume_breakpoint_at_sal (gdbarch,
- sr_sal, null_frame_id);
+ tp->control.step_range_start = sal.pc;
+ tp->control.step_range_end = sal.pc;
}
proceed ((CORE_ADDR) -1, GDB_SIGNAL_DEFAULT);
}
struct target_waitstatus ws;
int stop_func_filled_in = 0;
- CORE_ADDR stop_func_alt_start = 0;
CORE_ADDR stop_func_start = 0;
CORE_ADDR stop_func_end = 0;
const char *stop_func_name = nullptr;
&block);
ecs->stop_func_name = gsi == nullptr ? nullptr : gsi->print_name ();
- /* PowerPC functions have a Local Entry Point and a Global Entry
- Point. There is only one Entry Point (GEP = LEP) for other
- architectures. Save the alternate entry point address (GEP) for
- use later. */
- ecs->stop_func_alt_start = ecs->stop_func_start;
-
/* The call to find_pc_partial_function, above, will set
stop_func_start and stop_func_end to the start and end
of the range containing the stop pc. If this range
+= gdbarch_deprecated_function_start_offset (gdbarch);
if (gdbarch_skip_entrypoint_p (gdbarch))
- /* The PowerPC architecture uses two entry points. Stop at the
- regular entry point (LEP on PowerPC) initially. Will setup a
- breakpoint for the alternate entry point (GEP) later. */
ecs->stop_func_start
= gdbarch_skip_entrypoint (gdbarch, ecs->stop_func_start);
}
/* Return using a step range so we will keep stepping back to the
first instruction in the source code line. */
- tp->control.step_range_start = ecs->stop_func_alt_start;
+ tp->control.step_range_start = ecs->stop_func_start;
tp->control.step_range_end = ecs->stop_func_start;
keep_going (ecs);
return;
(unless it's the function entry point, in which case
keep going back to the call point). */
CORE_ADDR stop_pc = ecs->event_thread->stop_pc ();
-
if (stop_pc == ecs->event_thread->control.step_range_start
- && (stop_pc < ecs->stop_func_alt_start
- || stop_pc > ecs->stop_func_start)
+ && stop_pc != ecs->stop_func_start
&& execution_direction == EXEC_REVERSE)
end_stepping_range (ecs);
else
This test verifies the fix for gdb bugzilla:
https://sourceware.org/bugzilla/show_bug.cgi?id=29927
-
- PowerPC supports two entry points to a function. The normal entry point
- is called the local entry point (LEP). The alternat entry point is called
- the global entry point (GEP). The GEP is only used if the table of
- contents (TOC) value stored in register r2 needs to be setup prior to
- execution starting at the LEP. A function call via a function pointer
- will entry via the GEP. A normal function call will enter via the LEP.
-
- This test has been expanded to include tests to verify the reverse-finish
- command works properly if the function is called via the GEP. The original
- test only verified the reverse-finish command for a normal call that used
- the LEP. */
+*/
int
function1 (int a, int b) // FUNCTION1
{
- /* The assembly code for this function when compiled for PowerPC is as
- follows:
-
- 0000000010000758 <function1>:
- 10000758: 02 10 40 3c lis r2,4098 <- GEP
- 1000075c: 00 7f 42 38 addi r2,r2,32512
- 10000760: a6 02 08 7c mflr r0 <- LEP
- 10000764: 10 00 01 f8 std r0,16(r1)
- ....
-
- When the function is called on PowerPC with function1 (a, b) the call
- enters at the Local Entry Point (LEP). When the function is called via
- a function pointer, the Global Entry Point (GEP) for function1 is used.
- The GEP sets up register 2 before reaching the LEP.
- */
int ret = 0;
ret = a + b;
main(int argc, char* argv[])
{
int a, b;
- int (*funp) (int, int) = &function1;
-
- /* Call function via Local Entry Point (LEP). */
a = 1;
b = 5;
- function1 (a, b); // CALL VIA LEP
-
- /* Call function via Global Entry Point (GEP). */
- a = 10;
- b = 50;
-
- funp (a, b); // CALL VIA GEP
+ function1 (a, b); // CALL FUNCTION
return 0;
}
# This test verifies the fix for gdb bugzilla:
# https://sourceware.org/bugzilla/show_bug.cgi?id=29927
-# PowerPC supports two entry points to a function. The normal entry point
-# is called the local entry point (LEP). The alternat entry point is called
-# the global entry point (GEP). A function call via a function pointer
-# will entry via the GEP. A normal function call will enter via the LEP.
-#
-# This test has been expanded to include tests to verify the reverse-finish
-# command works properly if the function is called via the GEP. The original
-# test only verified the reverse-finish command for a normal call that used
-# the LEP.
-
if ![supports_reverse] {
return
}
}
-### TEST 1: reverse finish from the entry point instruction (LEP) in
-### function1 when called using the normal entry point (LEP).
+### TEST 1: reverse finish from the entry point instruction in
+### function1.
# Set breakpoint at call to function1 in main.
-set bp_LEP_test [gdb_get_line_number "CALL VIA LEP" $srcfile]
-gdb_breakpoint $srcfile:$bp_LEP_test temporary
+set bp_FUNCTION [gdb_get_line_number "CALL FUNCTION" $srcfile]
+gdb_breakpoint $srcfile:$bp_FUNCTION temporary
# Continue to break point at function1 call in main.
gdb_continue_to_breakpoint \
"stopped at function1 entry point instruction to stepi into function" \
- ".*$srcfile:$bp_LEP_test\r\n.*"
+ ".*$srcfile:$bp_FUNCTION\r\n.*"
# stepi until we see "{" indicating we entered function1
-repeat_cmd_until "stepi" "CALL VIA LEP" "{" "stepi into function1 call"
+repeat_cmd_until "stepi" "CALL FUNCTION" "{" "stepi into function1 call"
-gdb_test "reverse-finish" ".*function1 \\(a, b\\); // CALL VIA LEP.*" \
- "reverse-finish function1 LEP call from LEP "
+gdb_test "reverse-finish" ".*function1 \\(a, b\\); // CALL FUNCTION.*" \
+ "reverse-finish function1 "
# Check to make sure we stopped at the first instruction in the source code
# line. It should only take one reverse next command to get to the previous
# source line. If GDB stops at the last instruction in the source code line
# it will take two reverse next instructions to get to the previous source
# line.
-gdb_test "reverse-next" ".*b = 5;.*" "reverse next at b = 5, call from LEP"
+gdb_test "reverse-next" ".*b = 5;.*" "reverse next at b = 5, call from function"
# Clear the recorded log.
gdb_test "record stop" "Process record is stopped.*" \
### TEST 2: reverse finish from the body of function1.
# Set breakpoint at call to function1 in main.
-gdb_breakpoint $srcfile:$bp_LEP_test temporary
+gdb_breakpoint $srcfile:$bp_FUNCTION temporary
# Continue to break point at function1 call in main.
gdb_continue_to_breakpoint \
"at function1 entry point instruction to step to body of function" \
- ".*$srcfile:$bp_LEP_test\r\n.*"
+ ".*$srcfile:$bp_FUNCTION\r\n.*"
# do a step instruction to get to the body of the function
gdb_test "step" ".*int ret = 0;.*" "step test 1"
-gdb_test "reverse-finish" ".*function1 \\(a, b\\); // CALL VIA LEP.*" \
- "reverse-finish function1 LEP call from function body"
+gdb_test "reverse-finish" ".*function1 \\(a, b\\); // CALL FUNCTION.*" \
+ "reverse-finish function1 call from function body"
# Check to make sure we stopped at the first instruction in the source code
# line. It should only take one reverse next command to get to the previous
# source line.
gdb_test "reverse-next" ".*b = 5;.*" \
"reverse next at b = 5, from function body"
-
-# Turn off record to clear logs and turn on again
-gdb_test "record stop" "Process record is stopped.*" \
- "turn off process record for test2"
-gdb_test_no_output "record" "turn on process record for test3"
-
-
-### TEST 3: reverse finish from the alternate entry point instruction (GEP) in
-### function1 when called using the alternate entry point (GEP).
-
-# Set breakpoint at call to funp in main.
-set bp_GEP_test [gdb_get_line_number "CALL VIA GEP" $srcfile]
-gdb_breakpoint $srcfile:$bp_GEP_test temporary
-
-# Continue to break point at funp call in main.
-gdb_continue_to_breakpoint \
- "stopped at function1 entry point instruction to stepi into funp" \
- ".*$srcfile:$bp_GEP_test\r\n.*"
-
-# stepi until we see "{" indicating we entered function.
-repeat_cmd_until "stepi" "CALL VIA GEP" "{" "stepi into funp call"
-
-gdb_test "reverse-finish" ".*funp \\(a, b\\);.*" \
- "function1 GEP call call from GEP"
-
-# Check to make sure we stopped at the first instruction in the source code
-# line. It should only take one reverse next command to get to the previous
-# source line. If GDB stops at the last instruction in the source code line
-# it will take two reverse next instructions to get to the previous source
-# line.
-gdb_test "reverse-next" ".*b = 50;.*" "reverse next at b = 50, call from GEP"
-
-# Turn off record to clear logs and turn on again
-gdb_test "record stop" "Process record is stopped.*" \
- "turn off process record for test3"
-gdb_test_no_output "record" "turn on process record for test4"
-
-
-### TEST 4: reverse finish from the body of function 1 when calling using the
-### alternate entrypoint (GEP).
-gdb_breakpoint $srcfile:$bp_GEP_test temporary
-
-# Continue to break point at funp call.
-gdb_continue_to_breakpoint \
- "at function1 entry point instruction to step to body of funp call" \
- ".*$srcfile:$bp_GEP_test\r\n.*"
-
-# Step into body of funp, called via GEP.
-gdb_test "step" ".*int ret = 0;.*" "step test 2"
-
-gdb_test "reverse-finish" ".*funp \\(a, b\\);.*" \
- "reverse-finish function1 GEP call, from function body "
-
-# Check to make sure we stopped at the first instruction in the source code
-# line. It should only take one reverse next command to get to the previous
-# source line. If GDB stops at the last instruction in the source code line
-# it will take two reverse next instructions to get to the previous source
-# line.
-gdb_test "reverse-next" ".*b = 50;.*" \
- "reverse next at b = 50 from function body"
projects / binutils-gdb.git / commitdiff