Mark up add_com, add_info and add_prefix_cmd.
* breakpoint.c, cp-support.c, dcache.c, dwarf2read.c: Update.
* exec.c, f-valprint.c, frame.c, gcore.c, gnu-nat.c: Update.
* go32-nat.c, infcmd.c, inflow.c, infptrace.c, infrun.c: Update.
* kod.c, language.c, linux-nat.c, m32r-rom.c, macrocmd.c: Update.
* maint.c, memattr.c, mips-tdep.c, nto-procfs.c, objc-lang.c: Update.
* ocd.c, pa64solib.c, printcmd.c, procfs.c, regcache.c: Update.
* remote-e7000.c, remote-m32r-sdi.c, remote-mips.c: Update.
* remote-sds.c, remote-sim.c, remote-st.c, remote-utils.c: Update.
* remote.c, rs6000-tdep.c, ser-go32.c, serial.c: Update.
* sh-tdep.c, solib.c, somsolib.c, source.c, stack.c: Update.
* symfile.c, symtab.c, target.c, thread.c, top.c: Update.
* tracepoint.c, typeprint.c, utils.c, valprint.c: Update.
* win32-nat.c, xcoffsolib.c, cli/cli-cmds.c, cli/cli-dump.c: Update.
* cli/cli-logging.c, tui/tui-layout.c, tui/tui-regs.c: Update.
* tui/tui-stack.c, tui/tui-win.c: Update.
+2005-02-15 Andrew Cagney <cagney@gnu.org>
+
+ Mark up add_com, add_info and add_prefix_cmd.
+ * breakpoint.c, cp-support.c, dcache.c, dwarf2read.c: Update.
+ * exec.c, f-valprint.c, frame.c, gcore.c, gnu-nat.c: Update.
+ * go32-nat.c, infcmd.c, inflow.c, infptrace.c, infrun.c: Update.
+ * kod.c, language.c, linux-nat.c, m32r-rom.c, macrocmd.c: Update.
+ * maint.c, memattr.c, mips-tdep.c, nto-procfs.c, objc-lang.c: Update.
+ * ocd.c, pa64solib.c, printcmd.c, procfs.c, regcache.c: Update.
+ * remote-e7000.c, remote-m32r-sdi.c, remote-mips.c: Update.
+ * remote-sds.c, remote-sim.c, remote-st.c, remote-utils.c: Update.
+ * remote.c, rs6000-tdep.c, ser-go32.c, serial.c: Update.
+ * sh-tdep.c, solib.c, somsolib.c, source.c, stack.c: Update.
+ * symfile.c, symtab.c, target.c, thread.c, top.c: Update.
+ * tracepoint.c, typeprint.c, utils.c, valprint.c: Update.
+ * win32-nat.c, xcoffsolib.c, cli/cli-cmds.c, cli/cli-dump.c: Update.
+ * cli/cli-logging.c, tui/tui-layout.c, tui/tui-regs.c: Update.
+ * tui/tui-stack.c, tui/tui-win.c: Update.
+
2005-02-14 Andrew Cagney <cagney@gnu.org>
* config/h8300/h8300.mt (DEPRECATED_TM_FILE): Delete.
before a breakpoint is set. */
breakpoint_count = 0;
- add_com ("ignore", class_breakpoint, ignore_command,
- "Set ignore-count of breakpoint number N to COUNT.\n\
-Usage is `ignore N COUNT'.");
+ add_com ("ignore", class_breakpoint, ignore_command, _("\
+Set ignore-count of breakpoint number N to COUNT.\n\
+Usage is `ignore N COUNT'."));
if (xdb_commands)
add_com_alias ("bc", "ignore", class_breakpoint, 1);
- add_com ("commands", class_breakpoint, commands_command,
- "Set commands to be executed when a breakpoint is hit.\n\
+ add_com ("commands", class_breakpoint, commands_command, _("\
+Set commands to be executed when a breakpoint is hit.\n\
Give breakpoint number as argument after \"commands\".\n\
With no argument, the targeted breakpoint is the last one set.\n\
The commands themselves follow starting on the next line.\n\
Type a line containing \"end\" to indicate the end of them.\n\
Give \"silent\" as the first line to make the breakpoint silent;\n\
-then no output is printed when it is hit, except what the commands print.");
+then no output is printed when it is hit, except what the commands print."));
- add_com ("condition", class_breakpoint, condition_command,
- "Specify breakpoint number N to break only if COND is true.\n\
+ add_com ("condition", class_breakpoint, condition_command, _("\
+Specify breakpoint number N to break only if COND is true.\n\
Usage is `condition N COND', where N is an integer and COND is an\n\
-expression to be evaluated whenever breakpoint N is reached.");
+expression to be evaluated whenever breakpoint N is reached."));
- c = add_com ("tbreak", class_breakpoint, tbreak_command,
- "Set a temporary breakpoint. Args like \"break\" command.\n\
+ c = add_com ("tbreak", class_breakpoint, tbreak_command, _("\
+Set a temporary breakpoint. Args like \"break\" command.\n\
Like \"break\" except the breakpoint is only temporary,\n\
so it will be deleted when hit. Equivalent to \"break\" followed\n\
-by using \"enable delete\" on the breakpoint number.");
+by using \"enable delete\" on the breakpoint number."));
set_cmd_completer (c, location_completer);
- c = add_com ("hbreak", class_breakpoint, hbreak_command,
- "Set a hardware assisted breakpoint. Args like \"break\" command.\n\
+ c = add_com ("hbreak", class_breakpoint, hbreak_command, _("\
+Set a hardware assisted breakpoint. Args like \"break\" command.\n\
Like \"break\" except the breakpoint requires hardware support,\n\
-some target hardware may not have this support.");
+some target hardware may not have this support."));
set_cmd_completer (c, location_completer);
- c = add_com ("thbreak", class_breakpoint, thbreak_command,
- "Set a temporary hardware assisted breakpoint. Args like \"break\" command.\n\
+ c = add_com ("thbreak", class_breakpoint, thbreak_command, _("\
+Set a temporary hardware assisted breakpoint. Args like \"break\" command.\n\
Like \"hbreak\" except the breakpoint is only temporary,\n\
-so it will be deleted when hit.");
+so it will be deleted when hit."));
set_cmd_completer (c, location_completer);
- add_prefix_cmd ("enable", class_breakpoint, enable_command,
- "Enable some breakpoints.\n\
+ add_prefix_cmd ("enable", class_breakpoint, enable_command, _("\
+Enable some breakpoints.\n\
Give breakpoint numbers (separated by spaces) as arguments.\n\
With no subcommand, breakpoints are enabled until you command otherwise.\n\
This is used to cancel the effect of the \"disable\" command.\n\
-With a subcommand you can enable temporarily.",
+With a subcommand you can enable temporarily."),
&enablelist, "enable ", 1, &cmdlist);
if (xdb_commands)
- add_com ("ab", class_breakpoint, enable_command,
- "Enable some breakpoints.\n\
+ add_com ("ab", class_breakpoint, enable_command, _("\
+Enable some breakpoints.\n\
Give breakpoint numbers (separated by spaces) as arguments.\n\
With no subcommand, breakpoints are enabled until you command otherwise.\n\
This is used to cancel the effect of the \"disable\" command.\n\
-With a subcommand you can enable temporarily.");
+With a subcommand you can enable temporarily."));
add_com_alias ("en", "enable", class_breakpoint, 1);
- add_abbrev_prefix_cmd ("breakpoints", class_breakpoint, enable_command,
- "Enable some breakpoints.\n\
+ add_abbrev_prefix_cmd ("breakpoints", class_breakpoint, enable_command, _("\
+Enable some breakpoints.\n\
Give breakpoint numbers (separated by spaces) as arguments.\n\
This is used to cancel the effect of the \"disable\" command.\n\
-May be abbreviated to simply \"enable\".\n",
+May be abbreviated to simply \"enable\".\n"),
&enablebreaklist, "enable breakpoints ", 1, &enablelist);
add_cmd ("once", no_class, enable_once_command, _("\
If a breakpoint is hit while enabled in this fashion, it becomes disabled."),
&enablelist);
- add_prefix_cmd ("disable", class_breakpoint, disable_command,
- "Disable some breakpoints.\n\
+ add_prefix_cmd ("disable", class_breakpoint, disable_command, _("\
+Disable some breakpoints.\n\
Arguments are breakpoint numbers with spaces in between.\n\
To disable all breakpoints, give no argument.\n\
-A disabled breakpoint is not forgotten, but has no effect until reenabled.",
+A disabled breakpoint is not forgotten, but has no effect until reenabled."),
&disablelist, "disable ", 1, &cmdlist);
add_com_alias ("dis", "disable", class_breakpoint, 1);
add_com_alias ("disa", "disable", class_breakpoint, 1);
if (xdb_commands)
- add_com ("sb", class_breakpoint, disable_command,
- "Disable some breakpoints.\n\
+ add_com ("sb", class_breakpoint, disable_command, _("\
+Disable some breakpoints.\n\
Arguments are breakpoint numbers with spaces in between.\n\
To disable all breakpoints, give no argument.\n\
-A disabled breakpoint is not forgotten, but has no effect until reenabled.");
+A disabled breakpoint is not forgotten, but has no effect until reenabled."));
add_cmd ("breakpoints", class_alias, disable_command, _("\
Disable some breakpoints.\n\
This command may be abbreviated \"disable\"."),
&disablelist);
- add_prefix_cmd ("delete", class_breakpoint, delete_command,
- "Delete some breakpoints or auto-display expressions.\n\
+ add_prefix_cmd ("delete", class_breakpoint, delete_command, _("\
+Delete some breakpoints or auto-display expressions.\n\
Arguments are breakpoint numbers with spaces in between.\n\
To delete all breakpoints, give no argument.\n\
\n\
Also a prefix command for deletion of other GDB objects.\n\
-The \"unset\" command is also an alias for \"delete\".",
+The \"unset\" command is also an alias for \"delete\"."),
&deletelist, "delete ", 1, &cmdlist);
add_com_alias ("d", "delete", class_breakpoint, 1);
if (xdb_commands)
- add_com ("db", class_breakpoint, delete_command,
- "Delete some breakpoints.\n\
+ add_com ("db", class_breakpoint, delete_command, _("\
+Delete some breakpoints.\n\
Arguments are breakpoint numbers with spaces in between.\n\
-To delete all breakpoints, give no argument.\n");
+To delete all breakpoints, give no argument.\n"));
add_cmd ("breakpoints", class_alias, delete_command, _("\
Delete some breakpoints or auto-display expressions.\n\
This command may be abbreviated \"delete\"."),
&deletelist);
- add_com ("clear", class_breakpoint, clear_command,
- concat ("Clear breakpoint at specified line or function.\n\
+ add_com ("clear", class_breakpoint, clear_command, _("\
+Clear breakpoint at specified line or function.\n\
Argument may be line number, function name, or \"*\" and an address.\n\
If line number is specified, all breakpoints in that line are cleared.\n\
If function is specified, breakpoints at beginning of function are cleared.\n\
-If an address is specified, breakpoints at that address are cleared.\n\n",
- "With no argument, clears all breakpoints in the line that the selected frame\n\
+If an address is specified, breakpoints at that address are cleared.\n\
+\n\
+With no argument, clears all breakpoints in the line that the selected frame\n\
is executing in.\n\
\n\
-See also the \"delete\" command which clears breakpoints by number.", NULL));
+See also the \"delete\" command which clears breakpoints by number."));
- c = add_com ("break", class_breakpoint, break_command,
- concat ("Set breakpoint at specified line or function.\n\
+ c = add_com ("break", class_breakpoint, break_command, _("\
+Set breakpoint at specified line or function.\n\
Argument may be line number, function name, or \"*\" and an address.\n\
If line number is specified, break at start of code for that line.\n\
If function is specified, break at start of code for that function.\n\
-If an address is specified, break at that exact address.\n",
- "With no arg, uses current execution address of selected stack frame.\n\
+If an address is specified, break at that exact address.\n\
+With no arg, uses current execution address of selected stack frame.\n\
This is useful for breaking on return to a stack frame.\n\
\n\
Multiple breakpoints at one place are permitted, and useful if conditional.\n\
\n\
-Do \"help breakpoints\" for info on other commands dealing with breakpoints.", NULL));
+Do \"help breakpoints\" for info on other commands dealing with breakpoints."));
set_cmd_completer (c, location_completer);
add_com_alias ("b", "break", class_run, 1);
if (dbx_commands)
{
- add_abbrev_prefix_cmd ("stop", class_breakpoint, stop_command,
- "Break in function/address or break at a line in the current file.",
+ add_abbrev_prefix_cmd ("stop", class_breakpoint, stop_command, _("\
+Break in function/address or break at a line in the current file."),
&stoplist, "stop ", 1, &cmdlist);
add_cmd ("in", class_breakpoint, stopin_command,
_("Break in function or address."), &stoplist);
add_cmd ("at", class_breakpoint, stopat_command,
_("Break at a line in the current file."), &stoplist);
- add_com ("status", class_info, breakpoints_info,
- concat ("Status of user-settable breakpoints, or breakpoint number NUMBER.\n\
+ add_com ("status", class_info, breakpoints_info, _("\
+Status of user-settable breakpoints, or breakpoint number NUMBER.\n\
The \"Type\" column indicates one of:\n\
\tbreakpoint - normal breakpoint\n\
\twatchpoint - watchpoint\n\
The \"Disp\" column contains one of \"keep\", \"del\", or \"dis\" to indicate\n\
the disposition of the breakpoint after it gets hit. \"dis\" means that the\n\
breakpoint will be disabled. The \"Address\" and \"What\" columns indicate the\n\
-address and file/line number respectively.\n\n",
- "Convenience variable \"$_\" and default examine address for \"x\"\n\
+address and file/line number respectively.\n\
+\n\
+Convenience variable \"$_\" and default examine address for \"x\"\n\
are set to the address of the last breakpoint listed.\n\n\
Convenience variable \"$bpnum\" contains the number of the last\n\
-breakpoint set.", NULL));
+breakpoint set."));
}
- add_info ("breakpoints", breakpoints_info,
- concat ("Status of user-settable breakpoints, or breakpoint number NUMBER.\n\
+ add_info ("breakpoints", breakpoints_info, _("\
+Status of user-settable breakpoints, or breakpoint number NUMBER.\n\
The \"Type\" column indicates one of:\n\
\tbreakpoint - normal breakpoint\n\
\twatchpoint - watchpoint\n\
The \"Disp\" column contains one of \"keep\", \"del\", or \"dis\" to indicate\n\
the disposition of the breakpoint after it gets hit. \"dis\" means that the\n\
breakpoint will be disabled. The \"Address\" and \"What\" columns indicate the\n\
-address and file/line number respectively.\n\n",
- "Convenience variable \"$_\" and default examine address for \"x\"\n\
+address and file/line number respectively.\n\
+\n\
+Convenience variable \"$_\" and default examine address for \"x\"\n\
are set to the address of the last breakpoint listed.\n\n\
Convenience variable \"$bpnum\" contains the number of the last\n\
-breakpoint set.", NULL));
+breakpoint set."));
if (xdb_commands)
- add_com ("lb", class_breakpoint, breakpoints_info,
- concat ("Status of user-settable breakpoints, or breakpoint number NUMBER.\n\
+ add_com ("lb", class_breakpoint, breakpoints_info, _("\
+Status of user-settable breakpoints, or breakpoint number NUMBER.\n\
The \"Type\" column indicates one of:\n\
\tbreakpoint - normal breakpoint\n\
\twatchpoint - watchpoint\n\
The \"Disp\" column contains one of \"keep\", \"del\", or \"dis\" to indicate\n\
the disposition of the breakpoint after it gets hit. \"dis\" means that the\n\
breakpoint will be disabled. The \"Address\" and \"What\" columns indicate the\n\
-address and file/line number respectively.\n\n",
- "Convenience variable \"$_\" and default examine address for \"x\"\n\
+address and file/line number respectively.\n\
+\n\
+Convenience variable \"$_\" and default examine address for \"x\"\n\
are set to the address of the last breakpoint listed.\n\n\
Convenience variable \"$bpnum\" contains the number of the last\n\
-breakpoint set.", NULL));
+breakpoint set."));
add_cmd ("breakpoints", class_maintenance, maintenance_info_breakpoints, _("\
Status of all breakpoints, or breakpoint number NUMBER.\n\
breakpoint set."),
&maintenanceinfolist);
- add_com ("catch", class_breakpoint, catch_command,
- "Set catchpoints to catch events.\n\
+ add_com ("catch", class_breakpoint, catch_command, _("\
+Set catchpoints to catch events.\n\
Raised signals may be caught:\n\
\tcatch signal - all signals\n\
\tcatch signal <signame> - a particular signal\n\
\n\
Do \"help set follow-fork-mode\" for info on debugging your program\n\
after a fork or vfork is caught.\n\n\
-Do \"help breakpoints\" for info on other commands dealing with breakpoints.");
+Do \"help breakpoints\" for info on other commands dealing with breakpoints."));
- add_com ("tcatch", class_breakpoint, tcatch_command,
- "Set temporary catchpoints to catch events.\n\
+ add_com ("tcatch", class_breakpoint, tcatch_command, _("\
+Set temporary catchpoints to catch events.\n\
Args like \"catch\" command.\n\
Like \"catch\" except the catchpoint is only temporary,\n\
so it will be deleted when hit. Equivalent to \"catch\" followed\n\
-by using \"enable delete\" on the catchpoint number.");
+by using \"enable delete\" on the catchpoint number."));
- c = add_com ("watch", class_breakpoint, watch_command,
- "Set a watchpoint for an expression.\n\
+ c = add_com ("watch", class_breakpoint, watch_command, _("\
+Set a watchpoint for an expression.\n\
A watchpoint stops execution of your program whenever the value of\n\
-an expression changes.");
+an expression changes."));
set_cmd_completer (c, location_completer);
- c = add_com ("rwatch", class_breakpoint, rwatch_command,
- "Set a read watchpoint for an expression.\n\
+ c = add_com ("rwatch", class_breakpoint, rwatch_command, _("\
+Set a read watchpoint for an expression.\n\
A watchpoint stops execution of your program whenever the value of\n\
-an expression is read.");
+an expression is read."));
set_cmd_completer (c, location_completer);
- c = add_com ("awatch", class_breakpoint, awatch_command,
- "Set a watchpoint for an expression.\n\
+ c = add_com ("awatch", class_breakpoint, awatch_command, _("\
+Set a watchpoint for an expression.\n\
A watchpoint stops execution of your program whenever the value of\n\
-an expression is either read or written.");
+an expression is either read or written."));
set_cmd_completer (c, location_completer);
add_info ("watchpoints", breakpoints_info,
- "Synonym for ``info breakpoints''.");
+ _("Synonym for ``info breakpoints''."));
c = add_set_cmd ("can-use-hw-watchpoints", class_support, var_zinteger,
can_use_hw_watchpoints = 1;
- add_prefix_cmd ("breakpoint", class_maintenance, set_breakpoint_cmd, "\
+ add_prefix_cmd ("breakpoint", class_maintenance, set_breakpoint_cmd, _("\
Breakpoint specific settings\n\
Configure various breakpoint-specific variables such as\n\
-pending breakpoint behavior",
+pending breakpoint behavior"),
&breakpoint_set_cmdlist, "set breakpoint ",
0/*allow-unknown*/, &setlist);
- add_prefix_cmd ("breakpoint", class_maintenance, show_breakpoint_cmd, "\
+ add_prefix_cmd ("breakpoint", class_maintenance, show_breakpoint_cmd, _("\
Breakpoint specific settings\n\
Configure various breakpoint-specific variables such as\n\
-pending breakpoint behavior",
+pending breakpoint behavior"),
&breakpoint_show_cmdlist, "show breakpoint ",
0/*allow-unknown*/, &showlist);
/* Define general commands. */
- add_com ("pwd", class_files, pwd_command,
- "Print working directory. This is used for your program as well.");
+ add_com ("pwd", class_files, pwd_command, _("\
+Print working directory. This is used for your program as well."));
c = add_cmd ("cd", class_files, cd_command, _("\
Set working directory to DIR for debugger and program being debugged.\n\
The change does not take effect for the program being debugged\n\
until the next time it is started."), &cmdlist);
set_cmd_completer (c, filename_completer);
- add_com ("echo", class_support, echo_command,
- "Print a constant string. Give string as argument.\n\
+ add_com ("echo", class_support, echo_command, _("\
+Print a constant string. Give string as argument.\n\
C escape sequences may be used in the argument.\n\
No newline is added at the end of the argument;\n\
use \"\\n\" if you want a newline to be printed.\n\
Since leading and trailing whitespace are ignored in command arguments,\n\
if you want to print some you must use \"\\\" before leading whitespace\n\
-to be printed or after trailing whitespace.");
- add_com ("document", class_support, document_command,
- "Document a user-defined command.\n\
+to be printed or after trailing whitespace."));
+ add_com ("document", class_support, document_command, _("\
+Document a user-defined command.\n\
Give command name as argument. Give documentation on following lines.\n\
-End with a line of just \"end\".");
- add_com ("define", class_support, define_command,
- "Define a new command name. Command name is argument.\n\
+End with a line of just \"end\"."));
+ add_com ("define", class_support, define_command, _("\
+Define a new command name. Command name is argument.\n\
Definition appears on following lines, one command per line.\n\
End with a line of just \"end\".\n\
Use the \"document\" command to give documentation for the new command.\n\
-Commands defined in this way may have up to ten arguments.");
+Commands defined in this way may have up to ten arguments."));
c = add_cmd ("source", class_support, source_command, _("\
Read commands from a file named FILE.\n\
when gdb is started."), &cmdlist);
set_cmd_completer (c, filename_completer);
- add_com ("quit", class_support, quit_command, "Exit gdb.");
- c = add_com ("help", class_support, help_command, "Print list of commands.");
+ add_com ("quit", class_support, quit_command, _("Exit gdb."));
+ c = add_com ("help", class_support, help_command,
+ _("Print list of commands."));
set_cmd_completer (c, command_completer);
add_com_alias ("q", "quit", class_support, 1);
add_com_alias ("h", "help", class_support, 1);
set_verbose (NULL, 0, c);
add_prefix_cmd ("history", class_support, set_history,
- "Generic command for setting command history parameters.",
+ _("Generic command for setting command history parameters."),
&sethistlist, "set history ", 0, &setlist);
add_prefix_cmd ("history", class_support, show_history,
- "Generic command for showing command history parameters.",
+ _("Generic command for showing command history parameters."),
&showhistlist, "show history ", 0, &showlist);
deprecated_add_show_from_set
Without an argument, history expansion is enabled.", &sethistlist),
&showhistlist);
- add_prefix_cmd ("info", class_info, info_command,
- "Generic command for showing things about the program being debugged.",
+ add_prefix_cmd ("info", class_info, info_command, _("\
+Generic command for showing things about the program being debugged."),
&infolist, "info ", 0, &cmdlist);
add_com_alias ("i", "info", class_info, 1);
add_com ("complete", class_obscure, complete_command,
- "List the completions for the rest of the line as a command.");
+ _("List the completions for the rest of the line as a command."));
add_prefix_cmd ("show", class_info, show_command,
- "Generic command for showing things about the debugger.",
+ _("Generic command for showing things about the debugger."),
&showlist, "show ", 0, &cmdlist);
/* Another way to get at the same thing. */
- add_info ("set", show_command, "Show all GDB settings.");
+ add_info ("set", show_command, _("Show all GDB settings."));
add_cmd ("commands", no_class, show_commands, _("\
Show the history of commands you typed.\n\
add_cmd ("version", no_class, show_version,
_("Show what version of GDB this is."), &showlist);
- add_com ("while", class_support, while_command,
- "Execute nested commands WHILE the conditional expression is non zero.\n\
+ add_com ("while", class_support, while_command, _("\
+Execute nested commands WHILE the conditional expression is non zero.\n\
The conditional expression must follow the word `while' and must in turn be\n\
followed by a new line. The nested commands must be entered one per line,\n\
-and should be terminated by the word `end'.");
+and should be terminated by the word `end'."));
- add_com ("if", class_support, if_command,
- "Execute nested commands once IF the conditional expression is non zero.\n\
+ add_com ("if", class_support, if_command, _("\
+Execute nested commands once IF the conditional expression is non zero.\n\
The conditional expression must follow the word `if' and must in turn be\n\
followed by a new line. The nested commands must be entered one per line,\n\
and should be terminated by the word 'else' or `end'. If an else clause\n\
-is used, the same rules apply to its nested commands as to the first ones.");
+is used, the same rules apply to its nested commands as to the first ones."));
/* If target is open when baud changes, it doesn't take effect until the
next open (I think, not sure). */
&showlist);
add_prefix_cmd ("debug", no_class, set_debug,
- "Generic command for setting gdb debugging flags",
+ _("Generic command for setting gdb debugging flags"),
&setdebuglist, "set debug ", 0, &setlist);
add_prefix_cmd ("debug", no_class, show_debug,
- "Generic command for showing gdb debugging flags",
+ _("Generic command for showing gdb debugging flags"),
&showdebuglist, "show debug ", 0, &showlist);
- c = add_com ("shell", class_support, shell_escape,
- "Execute the rest of the line as a shell command.\n\
-With no arguments, run an inferior shell.");
+ c = add_com ("shell", class_support, shell_escape, _("\
+Execute the rest of the line as a shell command.\n\
+With no arguments, run an inferior shell."));
set_cmd_completer (c, filename_completer);
- c = add_com ("edit", class_files, edit_command,
- concat ("Edit specified file or function.\n\
+ c = add_com ("edit", class_files, edit_command, _("\
+Edit specified file or function.\n\
With no argument, edits file containing most recent line listed.\n\
-", "\
Editing targets can be specified in these ways:\n\
FILE:LINENUM, to edit at that line in that file,\n\
FUNCTION, to edit at the beginning of that function,\n\
FILE:FUNCTION, to distinguish among like-named static functions.\n\
*ADDRESS, to edit at the line containing that address.\n\
-Uses EDITOR environment variable contents as editor (or ex as default).",NULL));
+Uses EDITOR environment variable contents as editor (or ex as default)."));
c->completer = location_completer;
- add_com ("list", class_files, list_command,
- concat ("List specified function or line.\n\
+ add_com ("list", class_files, list_command, _("\
+List specified function or line.\n\
With no argument, lists ten more lines after or around previous listing.\n\
\"list -\" lists the ten lines before a previous ten-line listing.\n\
One argument specifies a line, and ten lines are listed around that line.\n\
Two arguments with comma between specify starting and ending lines to list.\n\
-", "\
Lines can be specified in these ways:\n\
LINENUM, to list around that line in current file,\n\
FILE:LINENUM, to list around that line in that file,\n\
FUNCTION, to list around beginning of that function,\n\
FILE:FUNCTION, to distinguish among like-named static functions.\n\
*ADDRESS, to list around the line containing that address.\n\
-With two args if one is empty it stands for ten lines away from the other arg.", NULL));
+With two args if one is empty it stands for ten lines away from the other arg."));
if (!xdb_commands)
add_com_alias ("l", "list", class_files, 1);
if (dbx_commands)
add_com_alias ("file", "list", class_files, 1);
- c = add_com ("disassemble", class_vars, disassemble_command,
- "Disassemble a specified section of memory.\n\
+ c = add_com ("disassemble", class_vars, disassemble_command, _("\
+Disassemble a specified section of memory.\n\
Default is the function surrounding the pc of the selected frame.\n\
With a single argument, the function surrounding that address is dumped.\n\
-Two arguments are taken as a range of memory to dump.");
+Two arguments are taken as a range of memory to dump."));
set_cmd_completer (c, location_completer);
if (xdb_commands)
add_com_alias ("va", "disassemble", class_xdb, 0);
if (xdb_commands)
add_com_alias ("!", "shell", class_support, 0);
- c = add_com ("make", class_support, make_command,
- "Run the ``make'' program using the rest of the line as arguments.");
+ c = add_com ("make", class_support, make_command, _("\
+Run the ``make'' program using the rest of the line as arguments."));
set_cmd_completer (c, filename_completer);
add_cmd ("user", no_class, show_user, _("\
Show definitions of user defined commands.\n\
Argument is the name of the user defined command.\n\
With no argument, show definitions of all user defined commands."), &showlist);
- add_com ("apropos", class_support, apropos_command, "Search for commands matching a REGEXP");
+ add_com ("apropos", class_support, apropos_command,
+ _("Search for commands matching a REGEXP"));
deprecated_add_show_from_set
(add_set_cmd ("max-user-call-depth", no_class, var_integer,
_initialize_cli_dump (void)
{
struct cmd_list_element *c;
- add_prefix_cmd ("dump", class_vars, dump_command, "\
-Dump target code/data to a local file.",
+ add_prefix_cmd ("dump", class_vars, dump_command, _("\
+Dump target code/data to a local file."),
&dump_cmdlist, "dump ",
0/*allow-unknown*/,
&cmdlist);
- add_prefix_cmd ("append", class_vars, append_command, "\
-Append target code/data to a local file.",
+ add_prefix_cmd ("append", class_vars, append_command, _("\
+Append target code/data to a local file."),
&append_cmdlist, "append ",
0/*allow-unknown*/,
&cmdlist);
Arguments are FILE EXPRESSION. Writes the value of EXPRESSION to\n\
the specified FILE in raw target ordered bytes.");
- add_prefix_cmd ("srec", all_commands, srec_dump_command, "\
-Write target code/data to an srec file.",
+ add_prefix_cmd ("srec", all_commands, srec_dump_command, _("\
+Write target code/data to an srec file."),
&srec_cmdlist, "dump srec ",
0 /*allow-unknown*/,
&dump_cmdlist);
- add_prefix_cmd ("ihex", all_commands, ihex_dump_command, "\
-Write target code/data to an intel hex file.",
+ add_prefix_cmd ("ihex", all_commands, ihex_dump_command, _("\
+Write target code/data to an intel hex file."),
&ihex_cmdlist, "dump ihex ",
0 /*allow-unknown*/,
&dump_cmdlist);
- add_prefix_cmd ("tekhex", all_commands, tekhex_dump_command, "\
-Write target code/data to a tekhex file.",
+ add_prefix_cmd ("tekhex", all_commands, tekhex_dump_command, _("\
+Write target code/data to a tekhex file."),
&tekhex_cmdlist, "dump tekhex ",
0 /*allow-unknown*/,
&dump_cmdlist);
- add_prefix_cmd ("binary", all_commands, binary_dump_command, "\
-Write target code/data to a raw binary file.",
+ add_prefix_cmd ("binary", all_commands, binary_dump_command, _("\
+Write target code/data to a raw binary file."),
&binary_dump_cmdlist, "dump binary ",
0 /*allow-unknown*/,
&dump_cmdlist);
- add_prefix_cmd ("binary", all_commands, binary_append_command, "\
-Append target code/data to a raw binary file.",
+ add_prefix_cmd ("binary", all_commands, binary_append_command, _("\
+Append target code/data to a raw binary file."),
&binary_append_cmdlist, "append binary ",
0 /*allow-unknown*/,
&append_cmdlist);
to the specified FILE in raw target ordered bytes."),
&binary_append_cmdlist);
- c = add_com ("restore", class_vars, restore_command,
- "Restore the contents of FILE to target memory.\n\
+ c = add_com ("restore", class_vars, restore_command, _("\
+Restore the contents of FILE to target memory.\n\
Arguments are FILE OFFSET START END where all except FILE are optional.\n\
OFFSET will be added to the base address of the file (default zero).\n\
If START and END are given, only the file contents within that range\n\
-(file relative) will be restored to target memory.");
+(file relative) will be restored to target memory."));
c->completer = filename_completer;
/* FIXME: completers for other commands. */
}
add_prefix_cmd ("logging", class_support, set_logging_command,
- "Set logging options", &set_logging_cmdlist,
+ _("Set logging options"), &set_logging_cmdlist,
"set logging ", 0, &setlist);
add_prefix_cmd ("logging", class_support, show_logging_command,
- "Show logging options", &show_logging_cmdlist,
+ _("Show logging options"), &show_logging_cmdlist,
"show logging ", 0, &showlist);
add_setshow_boolean_cmd ("overwrite", class_support, &logging_overwrite, _("\
Set whether logging overwrites or appends to the log file."), _("\
_initialize_cp_support (void)
{
add_prefix_cmd ("cplus", class_maintenance, maint_cplus_command,
- "C++ maintenance commands.", &maint_cplus_cmd_list,
+ _("C++ maintenance commands."), &maint_cplus_cmd_list,
"maintenance cplus ", 0, &maintenancelist);
add_alias_cmd ("cp", "cplus", class_maintenance, 1, &maintenancelist);
&showlist);
add_info ("dcache", dcache_info,
- "Print information on the dcache performance.");
+ _("Print information on the dcache performance."));
}
{
dwarf2_objfile_data_key = register_objfile_data ();
- add_prefix_cmd ("dwarf2", class_maintenance, set_dwarf2_cmd,
- "Set DWARF 2 specific variables.\n"
- "Configure DWARF 2 variables such as the cache size",
+ add_prefix_cmd ("dwarf2", class_maintenance, set_dwarf2_cmd, _("\
+Set DWARF 2 specific variables.\n\
+Configure DWARF 2 variables such as the cache size"),
&set_dwarf2_cmdlist, "maintenance set dwarf2 ",
0/*allow-unknown*/, &maintenance_set_cmdlist);
- add_prefix_cmd ("dwarf2", class_maintenance, show_dwarf2_cmd,
- "Show DWARF 2 specific variables\n"
- "Show DWARF 2 variables such as the cache size",
+ add_prefix_cmd ("dwarf2", class_maintenance, show_dwarf2_cmd, _("\
+Show DWARF 2 specific variables\n\
+Show DWARF 2 variables such as the cache size"),
&show_dwarf2_cmdlist, "maintenance show dwarf2 ",
0/*allow-unknown*/, &maintenance_show_cmdlist);
No arg means have no executable file."), &cmdlist);
set_cmd_completer (c, filename_completer);
- add_com ("section", class_files, set_section_command,
- "Change the base address of section SECTION of the exec file to ADDR.\n\
+ add_com ("section", class_files, set_section_command, _("\
+Change the base address of section SECTION of the exec file to ADDR.\n\
This can be used if the exec file does not contain section addresses,\n\
(such as in the a.out format), or when the addresses specified in the\n\
file itself are wrong. Each section must be changed separately. The\n\
-``info files'' command lists all the sections and their addresses.");
+``info files'' command lists all the sections and their addresses."));
deprecated_add_show_from_set
(add_set_cmd ("write", class_support, var_boolean, (char *) &write_files,
_initialize_f_valprint (void)
{
add_info ("common", info_common_command,
- "Print out the values contained in a Fortran COMMON block.");
+ _("Print out the values contained in a Fortran COMMON block."));
if (xdb_commands)
add_com ("lc", class_info, info_common_command,
- "Print out the values contained in a Fortran COMMON block.");
+ _("Print out the values contained in a Fortran COMMON block."));
}
observer_attach_target_changed (frame_observer_target_changed);
- add_prefix_cmd ("backtrace", class_maintenance, set_backtrace_cmd, "\
+ add_prefix_cmd ("backtrace", class_maintenance, set_backtrace_cmd, _("\
Set backtrace specific variables.\n\
-Configure backtrace variables such as the backtrace limit",
+Configure backtrace variables such as the backtrace limit"),
&set_backtrace_cmdlist, "set backtrace ",
0/*allow-unknown*/, &setlist);
- add_prefix_cmd ("backtrace", class_maintenance, show_backtrace_cmd, "\
+ add_prefix_cmd ("backtrace", class_maintenance, show_backtrace_cmd, _("\
Show backtrace specific variables\n\
-Show backtrace variables such as the backtrace limit",
+Show backtrace variables such as the backtrace limit"),
&show_backtrace_cmdlist, "show backtrace ",
0/*allow-unknown*/, &showlist);
void
_initialize_gcore (void)
{
- add_com ("generate-core-file", class_files, gcore_command,
- "\
+ add_com ("generate-core-file", class_files, gcore_command, _("\
Save a core file with the current state of the debugged process.\n\
-Argument is optional filename. Default filename is 'core.<process_id>'.");
+Argument is optional filename. Default filename is 'core.<process_id>'."));
add_com_alias ("gcore", "generate-core-file", class_files, 1);
exec_set_find_memory_regions (objfile_find_memory_regions);
&showlist);
add_prefix_cmd ("task", no_class, set_task_cmd,
- "Command prefix for setting task attributes.",
+ _("Command prefix for setting task attributes."),
&set_task_cmd_list, "set task ", 0, &setlist);
add_prefix_cmd ("task", no_class, show_task_cmd,
- "Command prefix for showing task attributes.",
+ _("Command prefix for showing task attributes."),
&show_task_cmd_list, "show task ", 0, &showlist);
add_cmd ("pause", class_run, set_task_pause_cmd, _("\
add_thread_commands (void)
{
add_prefix_cmd ("thread", no_class, set_thread_cmd,
- "Command prefix for setting thread properties.",
+ _("Command prefix for setting thread properties."),
&set_thread_cmd_list, "set thread ", 0, &setlist);
add_prefix_cmd ("default", no_class, show_thread_cmd,
- "Command prefix for setting default thread properties.",
+ _("Command prefix for setting default thread properties."),
&set_thread_default_cmd_list, "set thread default ", 0,
&set_thread_cmd_list);
add_prefix_cmd ("thread", no_class, set_thread_default_cmd,
- "Command prefix for showing thread properties.",
+ _("Command prefix for showing thread properties."),
&show_thread_cmd_list, "show thread ", 0, &showlist);
add_prefix_cmd ("default", no_class, show_thread_default_cmd,
- "Command prefix for showing default thread properties.",
+ _("Command prefix for showing default thread properties."),
&show_thread_default_cmd_list, "show thread default ", 0,
&show_thread_cmd_list);
init_go32_ops ();
add_target (&go32_ops);
- add_prefix_cmd ("dos", class_info, go32_info_dos_command,
- "Print information specific to DJGPP (aka MS-DOS) debugging.",
+ add_prefix_cmd ("dos", class_info, go32_info_dos_command, _("\
+Print information specific to DJGPP (aka MS-DOS) debugging."),
&info_dos_cmdlist, "info dos ", 0, &infolist);
add_cmd ("sysinfo", class_info, go32_sysinfo, _("\
struct cmd_list_element *c;
c = add_com ("tty", class_run, tty_command,
- "Set terminal for future runs of program being debugged.");
+ _("Set terminal for future runs of program being debugged."));
set_cmd_completer (c, filename_completer);
c = add_set_cmd ("args", class_run, var_string_noescape,
set_cmd_completer (c, noop_completer);
add_prefix_cmd ("unset", no_class, unset_command,
- "Complement to certain \"set\" commands.",
+ _("Complement to certain \"set\" commands."),
&unsetlist, "unset ", 0, &cmdlist);
c = add_cmd ("environment", class_run, unset_environment_command, _("\
&setlist);
set_cmd_completer (c, noop_completer);
- c = add_com ("path", class_files, path_command,
- "Add directory DIR(s) to beginning of search path for object files.\n\
+ c = add_com ("path", class_files, path_command, _("\
+Add directory DIR(s) to beginning of search path for object files.\n\
$cwd in the path means the current working directory.\n\
This path is equivalent to the $PATH shell variable. It is a list of\n\
directories, separated by colons. These directories are searched to find\n\
-fully linked executable files and separately compiled object files as needed.");
+fully linked executable files and separately compiled object files as needed."));
set_cmd_completer (c, filename_completer);
c = add_cmd ("paths", no_class, path_info, _("\
&showlist);
set_cmd_completer (c, noop_completer);
- add_com ("attach", class_run, attach_command,
- "Attach to a process or file outside of GDB.\n\
+ add_com ("attach", class_run, attach_command, _("\
+Attach to a process or file outside of GDB.\n\
This command attaches to another target, of the same type as your last\n\
\"target\" command (\"info files\" will show your target stack).\n\
The command may take as argument a process id or a device file.\n\
program running in the process, looking first in the current working\n\
directory, or (if not found there) using the source file search path\n\
(see the \"directory\" command). You can also use the \"file\" command\n\
-to specify the program, and to load its symbol table.");
+to specify the program, and to load its symbol table."));
- add_com ("detach", class_run, detach_command,
- "Detach a process or file previously attached.\n\
+ add_com ("detach", class_run, detach_command, _("\
+Detach a process or file previously attached.\n\
If a process, it is no longer traced, and it continues its execution. If\n\
-you were debugging a file, the file is closed and gdb no longer accesses it.");
+you were debugging a file, the file is closed and gdb no longer accesses it."));
- add_com ("disconnect", class_run, disconnect_command,
- "Disconnect from a target.\n\
+ add_com ("disconnect", class_run, disconnect_command, _("\
+Disconnect from a target.\n\
The target will wait for another debugger to connect. Not available for\n\
-all targets.");
+all targets."));
- add_com ("signal", class_run, signal_command,
- "Continue program giving it signal specified by the argument.\n\
-An argument of \"0\" means continue program without giving it a signal.");
+ add_com ("signal", class_run, signal_command, _("\
+Continue program giving it signal specified by the argument.\n\
+An argument of \"0\" means continue program without giving it a signal."));
- add_com ("stepi", class_run, stepi_command,
- "Step one instruction exactly.\n\
-Argument N means do this N times (or till program stops for another reason).");
+ add_com ("stepi", class_run, stepi_command, _("\
+Step one instruction exactly.\n\
+Argument N means do this N times (or till program stops for another reason)."));
add_com_alias ("si", "stepi", class_alias, 0);
- add_com ("nexti", class_run, nexti_command,
- "Step one instruction, but proceed through subroutine calls.\n\
-Argument N means do this N times (or till program stops for another reason).");
+ add_com ("nexti", class_run, nexti_command, _("\
+Step one instruction, but proceed through subroutine calls.\n\
+Argument N means do this N times (or till program stops for another reason)."));
add_com_alias ("ni", "nexti", class_alias, 0);
- add_com ("finish", class_run, finish_command,
- "Execute until selected stack frame returns.\n\
-Upon return, the value returned is printed and put in the value history.");
+ add_com ("finish", class_run, finish_command, _("\
+Execute until selected stack frame returns.\n\
+Upon return, the value returned is printed and put in the value history."));
- add_com ("next", class_run, next_command,
- "Step program, proceeding through subroutine calls.\n\
+ add_com ("next", class_run, next_command, _("\
+Step program, proceeding through subroutine calls.\n\
Like the \"step\" command as long as subroutine calls do not happen;\n\
when they do, the call is treated as one instruction.\n\
-Argument N means do this N times (or till program stops for another reason).");
+Argument N means do this N times (or till program stops for another reason)."));
add_com_alias ("n", "next", class_run, 1);
if (xdb_commands)
add_com_alias ("S", "next", class_run, 1);
- add_com ("step", class_run, step_command,
- "Step program until it reaches a different source line.\n\
-Argument N means do this N times (or till program stops for another reason).");
+ add_com ("step", class_run, step_command, _("\
+Step program until it reaches a different source line.\n\
+Argument N means do this N times (or till program stops for another reason)."));
add_com_alias ("s", "step", class_run, 1);
- c = add_com ("until", class_run, until_command,
- "Execute until the program reaches a source line greater than the current\n\
-or a specified location (same args as break command) within the current frame.");
+ c = add_com ("until", class_run, until_command, _("\
+Execute until the program reaches a source line greater than the current\n\
+or a specified location (same args as break command) within the current frame."));
set_cmd_completer (c, location_completer);
add_com_alias ("u", "until", class_run, 1);
- c = add_com ("advance", class_run, advance_command,
- "Continue the program up to the given location (same form as args for break command).\n\
-Execution will also stop upon exit from the current stack frame.");
+ c = add_com ("advance", class_run, advance_command, _("\
+Continue the program up to the given location (same form as args for break command).\n\
+Execution will also stop upon exit from the current stack frame."));
set_cmd_completer (c, location_completer);
- c = add_com ("jump", class_run, jump_command,
- "Continue program being debugged at specified line or address.\n\
+ c = add_com ("jump", class_run, jump_command, _("\
+Continue program being debugged at specified line or address.\n\
Give as argument either LINENUM or *ADDR, where ADDR is an expression\n\
-for an address to start at.");
+for an address to start at."));
set_cmd_completer (c, location_completer);
if (xdb_commands)
{
- c = add_com ("go", class_run, go_command,
- "Usage: go <location>\n\
+ c = add_com ("go", class_run, go_command, _("\
+Usage: go <location>\n\
Continue program being debugged, stopping at specified line or \n\
address.\n\
Give as argument either LINENUM or *ADDR, where ADDR is an \n\
expression for an address to start at.\n\
-This command is a combination of tbreak and jump.");
+This command is a combination of tbreak and jump."));
set_cmd_completer (c, location_completer);
}
if (xdb_commands)
add_com_alias ("g", "go", class_run, 1);
- add_com ("continue", class_run, continue_command,
- "Continue program being debugged, after signal or breakpoint.\n\
+ add_com ("continue", class_run, continue_command, _("\
+Continue program being debugged, after signal or breakpoint.\n\
If proceeding from breakpoint, a number N may be used as an argument,\n\
which means to set the ignore count of that breakpoint to N - 1 (so that\n\
-the breakpoint won't break until the Nth time it is reached).");
+the breakpoint won't break until the Nth time it is reached)."));
add_com_alias ("c", "cont", class_run, 1);
add_com_alias ("fg", "cont", class_run, 1);
- c = add_com ("run", class_run, run_command,
- "Start debugged program. You may specify arguments to give it.\n\
+ c = add_com ("run", class_run, run_command, _("\
+Start debugged program. You may specify arguments to give it.\n\
Args may include \"*\", or \"[...]\"; they are expanded using \"sh\".\n\
Input and output redirection with \">\", \"<\", or \">>\" are also allowed.\n\n\
With no arguments, uses arguments last specified (with \"run\" or \"set args\").\n\
To cancel previous arguments and run with no arguments,\n\
-use \"set args\" without arguments.");
+use \"set args\" without arguments."));
set_cmd_completer (c, filename_completer);
add_com_alias ("r", "run", class_run, 1);
if (xdb_commands)
add_com ("R", class_run, run_no_args_command,
- "Start debugged program with no arguments.");
+ _("Start debugged program with no arguments."));
- c = add_com ("start", class_run, start_command,
- "\
+ c = add_com ("start", class_run, start_command, _("\
Run the debugged program until the beginning of the main procedure.\n\
You may specify arguments to give to your program, just as with the\n\
-\"run\" command.");
+\"run\" command."));
set_cmd_completer (c, filename_completer);
add_com ("interrupt", class_run, interrupt_target_command,
- "Interrupt the execution of the debugged program.");
+ _("Interrupt the execution of the debugged program."));
- add_info ("registers", nofp_registers_info,
- "List of integer registers and their contents, for selected stack frame.\n\
-Register name as argument means describe only that register.");
+ add_info ("registers", nofp_registers_info, _("\
+List of integer registers and their contents, for selected stack frame.\n\
+Register name as argument means describe only that register."));
add_info_alias ("r", "registers", 1);
if (xdb_commands)
- add_com ("lr", class_info, nofp_registers_info,
- "List of integer registers and their contents, for selected stack frame.\n\
- Register name as argument means describe only that register.");
- add_info ("all-registers", all_registers_info,
- "List of all registers and their contents, for selected stack frame.\n\
-Register name as argument means describe only that register.");
+ add_com ("lr", class_info, nofp_registers_info, _("\
+List of integer registers and their contents, for selected stack frame.\n\
+Register name as argument means describe only that register."));
+ add_info ("all-registers", all_registers_info, _("\
+List of all registers and their contents, for selected stack frame.\n\
+Register name as argument means describe only that register."));
add_info ("program", program_info,
- "Execution status of the program.");
+ _("Execution status of the program."));
add_info ("float", float_info,
- "Print the status of the floating point unit\n");
+ _("Print the status of the floating point unit\n"));
add_info ("vector", vector_info,
- "Print the status of the vector unit\n");
+ _("Print the status of the vector unit\n"));
inferior_environ = make_environ ();
init_environ (inferior_environ);
_initialize_inflow (void)
{
add_info ("terminal", term_info,
- "Print inferior's saved terminal status.");
+ _("Print inferior's saved terminal status."));
add_com ("kill", class_run, kill_command,
- "Kill execution of program being debugged.");
+ _("Kill execution of program being debugged."));
inferior_ptid = null_ptid;
{
#if !defined (CHILD_XFER_MEMORY)
add_info ("udot", udot_info,
- "Print contents of kernel ``struct user'' for current child.");
+ _("Print contents of kernel ``struct user'' for current child."));
#endif
}
DEPRECATED_REGISTER_GDBARCH_SWAP (stop_registers);
deprecated_register_gdbarch_swap (NULL, 0, build_infrun);
- add_info ("signals", signals_info,
- "What debugger does when program gets various signals.\n\
-Specify a signal as argument to print info on that signal only.");
+ add_info ("signals", signals_info, _("\
+What debugger does when program gets various signals.\n\
+Specify a signal as argument to print info on that signal only."));
add_info_alias ("handle", "signals", 0);
- add_com ("handle", class_run, handle_command,
- concat ("Specify how to handle a signal.\n\
+ add_com ("handle", class_run, handle_command, _("\
+Specify how to handle a signal.\n\
Args are signals and actions to apply to those signals.\n\
Symbolic signals (e.g. SIGSEGV) are recommended but numeric signals\n\
from 1-15 are allowed for compatibility with old versions of GDB.\n\
Numeric ranges may be specified with the form LOW-HIGH (e.g. 1-5).\n\
The special arg \"all\" is recognized to mean all signals except those\n\
-used by the debugger, typically SIGTRAP and SIGINT.\n", "Recognized actions include \"stop\", \"nostop\", \"print\", \"noprint\",\n\
+used by the debugger, typically SIGTRAP and SIGINT.\n\
+Recognized actions include \"stop\", \"nostop\", \"print\", \"noprint\",\n\
\"pass\", \"nopass\", \"ignore\", or \"noignore\".\n\
Stop means reenter debugger if this signal happens (implies print).\n\
Print means print a message if this signal happens.\n\
Pass means let program see this signal; otherwise program doesn't know.\n\
Ignore is a synonym for nopass and noignore is a synonym for pass.\n\
-Pass and Stop may be combined.", NULL));
+Pass and Stop may be combined."));
if (xdb_commands)
{
- add_com ("lz", class_info, signals_info,
- "What debugger does when program gets various signals.\n\
-Specify a signal as argument to print info on that signal only.");
- add_com ("z", class_run, xdb_handle_command,
- concat ("Specify how to handle a signal.\n\
+ add_com ("lz", class_info, signals_info, _("\
+What debugger does when program gets various signals.\n\
+Specify a signal as argument to print info on that signal only."));
+ add_com ("z", class_run, xdb_handle_command, _("\
+Specify how to handle a signal.\n\
Args are signals and actions to apply to those signals.\n\
Symbolic signals (e.g. SIGSEGV) are recommended but numeric signals\n\
from 1-15 are allowed for compatibility with old versions of GDB.\n\
Numeric ranges may be specified with the form LOW-HIGH (e.g. 1-5).\n\
The special arg \"all\" is recognized to mean all signals except those\n\
-used by the debugger, typically SIGTRAP and SIGINT.\n", "Recognized actions include \"s\" (toggles between stop and nostop), \n\
+used by the debugger, typically SIGTRAP and SIGINT.\n\
+Recognized actions include \"s\" (toggles between stop and nostop), \n\
\"r\" (toggles between print and noprint), \"i\" (toggles between pass and \
nopass), \"Q\" (noprint)\n\
Stop means reenter debugger if this signal happens (implies print).\n\
Print means print a message if this signal happens.\n\
Pass means let program see this signal; otherwise program doesn't know.\n\
Ignore is a synonym for nopass and noignore is a synonym for pass.\n\
-Pass and Stop may be combined.", NULL));
+Pass and Stop may be combined."));
}
if (!dbx_commands)
/* Add kod related info commands to gdb. */
add_info (operating_system, info_kod_command,
- "Displays information about Kernel Objects.");
+ _("Displays information about Kernel Objects."));
p = strrchr (kodlib, '-');
if (p != NULL)
set_cmd_cfunc (show, show_language_command);
add_prefix_cmd ("check", no_class, set_check,
- "Set the status of the type/range checker.",
+ _("Set the status of the type/range checker."),
&setchecklist, "set check ", 0, &setlist);
add_alias_cmd ("c", "check", no_class, 1, &setlist);
add_alias_cmd ("ch", "check", no_class, 1, &setlist);
add_prefix_cmd ("check", no_class, show_check,
- "Show the status of the type/range checker.",
+ _("Show the status of the type/range checker."),
&showchecklist, "show check ", 0, &showlist);
add_alias_cmd ("c", "check", no_class, 1, &showlist);
add_alias_cmd ("ch", "check", no_class, 1, &showlist);
deprecated_child_ops.to_find_memory_regions = linux_nat_find_memory_regions;
deprecated_child_ops.to_make_corefile_notes = linux_nat_make_corefile_notes;
- add_info ("proc", linux_nat_info_proc_cmd,
- "Show /proc process information about any running process.\n\
+ add_info ("proc", linux_nat_info_proc_cmd, _("\
+Show /proc process information about any running process.\n\
Specify any process id, or use the program being debugged by default.\n\
Specify any of the following keywords for detailed info:\n\
mappings -- list of mapped memory regions.\n\
stat -- list a bunch of random process info.\n\
status -- list a different bunch of random process info.\n\
- all -- list all available /proc info.");
+ all -- list all available /proc info."));
init_linux_nat_ops ();
add_target (&linux_nat_ops);
NULL, /* FIXME: i18n: IP address for download server (GDB's host computer) is %s. */
NULL, NULL, &setlist, &showlist);
- add_com ("upload", class_obscure, m32r_upload_command,
- "Upload the srec file via the monitor's Ethernet upload capability.");
+ add_com ("upload", class_obscure, m32r_upload_command, _("\
+Upload the srec file via the monitor's Ethernet upload capability."));
- add_com ("tload", class_obscure, m32r_load, "test upload command.");
+ add_com ("tload", class_obscure, m32r_load, _("test upload command."));
}
/* We introduce a new command prefix, `macro', under which we'll put
the various commands for working with preprocessor macros. */
- add_prefix_cmd
- ("macro", class_info, macro_command,
- "Prefix for commands dealing with C preprocessor macros.",
- ¯olist, "macro ", 0, &cmdlist);
+ add_prefix_cmd ("macro", class_info, macro_command,
+ _("Prefix for commands dealing with C preprocessor macros."),
+ ¯olist, "macro ", 0, &cmdlist);
add_cmd ("expand", no_class, macro_expand_command, _("\
Fully expand any C/C++ preprocessor macro invocations in EXPRESSION.\n\
{
struct cmd_list_element *tmpcmd;
- add_prefix_cmd ("maintenance", class_maintenance, maintenance_command,
- "Commands for use by GDB maintainers.\n\
+ add_prefix_cmd ("maintenance", class_maintenance, maintenance_command, _("\
+Commands for use by GDB maintainers.\n\
Includes commands to dump specific internal GDB structures in\n\
a human readable form, to cause GDB to deliberately dump core,\n\
-to test internal functions such as the C++/ObjC demangler, etc.",
+to test internal functions such as the C++/ObjC demangler, etc."),
&maintenancelist, "maintenance ", 0,
&cmdlist);
add_com_alias ("mt", "maintenance", class_maintenance, 1);
- add_prefix_cmd ("info", class_maintenance, maintenance_info_command,
- "Commands for showing internal info about the program being debugged.",
+ add_prefix_cmd ("info", class_maintenance, maintenance_info_command, _("\
+Commands for showing internal info about the program being debugged."),
&maintenanceinfolist, "maintenance info ", 0,
&maintenancelist);
add_alias_cmd ("i", "info", class_maintenance, 1, &maintenancelist);
&maintenanceinfolist);
add_prefix_cmd ("print", class_maintenance, maintenance_print_command,
- "Maintenance command for printing GDB internal state.",
+ _("Maintenance command for printing GDB internal state."),
&maintenanceprintlist, "maintenance print ", 0,
&maintenancelist);
- add_prefix_cmd ("set", class_maintenance, maintenance_set_cmd, "\
+ add_prefix_cmd ("set", class_maintenance, maintenance_set_cmd, _("\
Set GDB internal variables used by the GDB maintainer.\n\
-Configure variables internal to GDB that aid in GDB's maintenance",
+Configure variables internal to GDB that aid in GDB's maintenance"),
&maintenance_set_cmdlist, "maintenance set ",
0/*allow-unknown*/,
&maintenancelist);
- add_prefix_cmd ("show", class_maintenance, maintenance_show_cmd, "\
+ add_prefix_cmd ("show", class_maintenance, maintenance_show_cmd, _("\
Show GDB internal variables used by the GDB maintainer.\n\
-Configure variables internal to GDB that aid in GDB's maintenance",
+Configure variables internal to GDB that aid in GDB's maintenance"),
&maintenance_show_cmdlist, "maintenance show ",
0/*allow-unknown*/,
&maintenancelist);
void
_initialize_mem (void)
{
- add_com ("mem", class_vars, mem_command,
- "Define attributes for memory region.\n\
+ add_com ("mem", class_vars, mem_command, _("\
+Define attributes for memory region.\n\
Usage: mem <lo addr> <hi addr> [<mode> <width> <cache>], \n\
where <mode> may be rw (read/write), ro (read-only) or wo (write-only), \n\
<width> may be 8, 16, 32, or 64, and \n\
- <cache> may be cache or nocache");
+ <cache> may be cache or nocache"));
add_cmd ("mem", class_vars, mem_enable_command, _("\
Enable memory region.\n\
Do \"info mem\" to see current list of code numbers."), &deletelist);
add_info ("mem", mem_info_command,
- "Memory region attributes");
+ _("Memory region attributes"));
}
/* Add root prefix command for all "set mips"/"show mips" commands */
add_prefix_cmd ("mips", no_class, set_mips_command,
- "Various MIPS specific commands.",
+ _("Various MIPS specific commands."),
&setmipscmdlist, "set mips ", 0, &setlist);
add_prefix_cmd ("mips", no_class, show_mips_command,
- "Various MIPS specific commands.",
+ _("Various MIPS specific commands."),
&showmipscmdlist, "show mips ", 0, &showlist);
/* Allow the user to override the saved register size. */
heuristic_proc_start. */
add_prefix_cmd ("mipsfpu", class_support, set_mipsfpu_command,
- "Set use of MIPS floating-point coprocessor.",
+ _("Set use of MIPS floating-point coprocessor."),
&mipsfpulist, "set mipsfpu ", 0, &setlist);
add_cmd ("single", class_support, set_mipsfpu_single_command,
_("Select single-precision MIPS floating-point coprocessor."),
nto_cpuinfo_flags = SYSPAGE_ENTRY (cpuinfo)->flags;
nto_cpuinfo_valid = 1;
- add_info ("pidlist", procfs_pidlist, "pidlist");
- add_info ("meminfo", procfs_meminfo, "memory information");
+ add_info ("pidlist", procfs_pidlist, _("pidlist"));
+ add_info ("meminfo", procfs_meminfo, _("memory information"));
nto_is_nto_target = procfs_is_nto_target;
}
{
add_language (&objc_language_defn);
add_info ("selectors", selectors_info, /* INFO SELECTORS command. */
- "All Objective-C selectors, or those matching REGEXP.");
+ _("All Objective-C selectors, or those matching REGEXP."));
add_info ("classes", classes_info, /* INFO CLASSES command. */
- "All Objective-C classes, or those matching REGEXP.");
+ _("All Objective-C classes, or those matching REGEXP."));
add_com ("print-object", class_vars, print_object_command,
- "Ask an Objective-C object to print itself.");
+ _("Ask an Objective-C object to print itself."));
add_com_alias ("po", "print-object", class_vars, 1);
}
"Set timeout value for remote read.\n", &setlist),
&showlist);
- add_prefix_cmd ("ocd", class_obscure, bdm_command, "", &ocd_cmd_list, "ocd ",
- 0, &cmdlist);
+ /* FIXME: i18n: What documentation? */
+ add_prefix_cmd ("ocd", class_obscure, bdm_command, (""), &ocd_cmd_list,
+ "ocd ", 0, &cmdlist);
/* FIXME: i18n: what documentation? */
add_cmd ("reset", class_obscure, bdm_reset_command, (""), &ocd_cmd_list);
_initialize_pa64_solib (void)
{
add_com ("sharedlibrary", class_files, pa64_solib_sharedlibrary_command,
- "Load shared object library symbols for files matching REGEXP.");
+ _("Load shared object library symbols for files matching REGEXP."));
add_info ("sharedlibrary", pa64_sharedlibrary_info_command,
- "Status of loaded shared object libraries.");
+ _("Status of loaded shared object libraries."));
deprecated_add_show_from_set
(add_set_cmd ("auto-solib-add", class_support, var_boolean,
current_display_number = -1;
add_info ("address", address_info,
- "Describe where symbol SYM is stored.");
+ _("Describe where symbol SYM is stored."));
- add_info ("symbol", sym_info,
- "Describe what symbol is at location ADDR.\n\
-Only for symbols with fixed locations (global or static scope).");
+ add_info ("symbol", sym_info, _("\
+Describe what symbol is at location ADDR.\n\
+Only for symbols with fixed locations (global or static scope)."));
- add_com ("x", class_vars, x_command,
- concat ("Examine memory: x/FMT ADDRESS.\n\
+ add_com ("x", class_vars, x_command, _("\
+Examine memory: x/FMT ADDRESS.\n\
ADDRESS is an expression for the memory address to examine.\n\
FMT is a repeat count followed by a format letter and a size letter.\n\
Format letters are o(octal), x(hex), d(decimal), u(unsigned decimal),\n\
- t(binary), f(float), a(address), i(instruction), c(char) and s(string).\n",
- "Size letters are b(byte), h(halfword), w(word), g(giant, 8 bytes).\n\
+ t(binary), f(float), a(address), i(instruction), c(char) and s(string).\n\
+Size letters are b(byte), h(halfword), w(word), g(giant, 8 bytes).\n\
The specified number of objects of the specified size are printed\n\
according to the format.\n\n\
Defaults for format and size letters are those previously used.\n\
Default count is 1. Default address is following last thing printed\n\
-with this command or \"print\".", NULL));
+with this command or \"print\"."));
#if 0
add_com ("whereis", class_vars, whereis_command,
- "Print line number and file of definition of variable.");
+ _("Print line number and file of definition of variable."));
#endif
- add_info ("display", display_info,
- "Expressions to display when program stops, with code numbers.");
+ add_info ("display", display_info, _("\
+Expressions to display when program stops, with code numbers."));
add_cmd ("undisplay", class_vars, undisplay_command, _("\
Cancel some expressions to be displayed when program stops.\n\
Do \"info display\" to see current list of code numbers."),
&cmdlist);
- add_com ("display", class_vars, display_command,
- "Print value of expression EXP each time the program stops.\n\
+ add_com ("display", class_vars, display_command, _("\
+Print value of expression EXP each time the program stops.\n\
/FMT may be used before EXP as in the \"print\" command.\n\
/FMT \"i\" or \"s\" or including a size-letter is allowed,\n\
as in the \"x\" command, and then EXP is used to get the address to examine\n\
and examining is done as in the \"x\" command.\n\n\
With no argument, display all currently requested auto-display expressions.\n\
-Use \"undisplay\" to cancel display requests previously made."
- );
+Use \"undisplay\" to cancel display requests previously made."));
add_cmd ("display", class_vars, enable_display, _("\
Enable some expressions to be displayed when program stops.\n\
No argument means cancel all automatic-display expressions.\n\
Do \"info display\" to see current list of code numbers."), &deletelist);
- add_com ("printf", class_vars, printf_command,
- "printf \"printf format string\", arg1, arg2, arg3, ..., argn\n\
-This is useful for formatted output in user-defined commands.");
+ add_com ("printf", class_vars, printf_command, _("\
+printf \"printf format string\", arg1, arg2, arg3, ..., argn\n\
+This is useful for formatted output in user-defined commands."));
- add_com ("output", class_vars, output_command,
- "Like \"print\" but don't put in value history and don't print newline.\n\
-This is useful in user-defined commands.");
+ add_com ("output", class_vars, output_command, _("\
+Like \"print\" but don't put in value history and don't print newline.\n\
+This is useful in user-defined commands."));
- add_prefix_cmd ("set", class_vars, set_command,
- concat ("Evaluate expression EXP and assign result to variable VAR, using assignment\n\
+ add_prefix_cmd ("set", class_vars, set_command, _("\
+Evaluate expression EXP and assign result to variable VAR, using assignment\n\
syntax appropriate for the current language (VAR = EXP or VAR := EXP for\n\
example). VAR may be a debugger \"convenience\" variable (names starting\n\
with $), a register (a few standard names starting with $), or an actual\n\
-variable in the program being debugged. EXP is any valid expression.\n",
- "Use \"set variable\" for variables with names identical to set subcommands.\n\
-\nWith a subcommand, this command modifies parts of the gdb environment.\n\
-You can see these environment settings with the \"show\" command.", NULL),
+variable in the program being debugged. EXP is any valid expression.\n\
+Use \"set variable\" for variables with names identical to set subcommands.\n\
+\n\
+With a subcommand, this command modifies parts of the gdb environment.\n\
+You can see these environment settings with the \"show\" command."),
&setlist, "set ", 1, &cmdlist);
if (dbx_commands)
- add_com ("assign", class_vars, set_command, concat ("Evaluate expression \
-EXP and assign result to variable VAR, using assignment\n\
+ add_com ("assign", class_vars, set_command, _("\
+Evaluate expression EXP and assign result to variable VAR, using assignment\n\
syntax appropriate for the current language (VAR = EXP or VAR := EXP for\n\
example). VAR may be a debugger \"convenience\" variable (names starting\n\
with $), a register (a few standard names starting with $), or an actual\n\
-variable in the program being debugged. EXP is any valid expression.\n",
- "Use \"set variable\" for variables with names identical to set subcommands.\n\
+variable in the program being debugged. EXP is any valid expression.\n\
+Use \"set variable\" for variables with names identical to set subcommands.\n\
\nWith a subcommand, this command modifies parts of the gdb environment.\n\
-You can see these environment settings with the \"show\" command.", NULL));
+You can see these environment settings with the \"show\" command."));
/* "call" is the same as "set", but handy for dbx users to call fns. */
- c = add_com ("call", class_vars, call_command,
- "Call a function in the program.\n\
+ c = add_com ("call", class_vars, call_command, _("\
+Call a function in the program.\n\
The argument is the function name and arguments, in the notation of the\n\
current working language. The result is printed and saved in the value\n\
-history, if it is not void.");
+history, if it is not void."));
set_cmd_completer (c, location_completer);
add_cmd ("variable", class_vars, set_command, _("\
This may usually be abbreviated to simply \"set\"."),
&setlist);
- c = add_com ("print", class_vars, print_command,
- concat ("Print value of expression EXP.\n\
+ c = add_com ("print", class_vars, print_command, _("\
+Print value of expression EXP.\n\
Variables accessible are those of the lexical environment of the selected\n\
stack frame, plus all those whose scope is global or an entire file.\n\
\n\
$NUM gets previous value number NUM. $ and $$ are the last two values.\n\
$$NUM refers to NUM'th value back from the last one.\n\
-Names starting with $ refer to registers (with the values they would have\n",
- "if the program were to return to the stack frame now selected, restoring\n\
+Names starting with $ refer to registers (with the values they would have\n\
+if the program were to return to the stack frame now selected, restoring\n\
all registers saved by frames farther in) or else to debugger\n\
\"convenience\" variables (any such name not a known register).\n\
-Use assignment expressions to give values to convenience variables.\n",
- "\n\
+Use assignment expressions to give values to convenience variables.\n\
+\n\
{TYPE}ADREXP refers to a datum of data type TYPE, located at address ADREXP.\n\
@ is a binary operator for treating consecutive data objects\n\
anywhere in memory as an array. FOO@NUM gives an array whose first\n\
element is FOO, whose second element is stored in the space following\n\
where FOO is stored, etc. FOO must be an expression whose value\n\
-resides in memory.\n",
- "\n\
+resides in memory.\n\
+\n\
EXP may be preceded with /FMT, where FMT is a format letter\n\
-but no count or size letter (see \"x\" command).", NULL));
+but no count or size letter (see \"x\" command)."));
set_cmd_completer (c, location_completer);
add_com_alias ("p", "print", class_vars, 1);
- c = add_com ("inspect", class_vars, inspect_command,
- "Same as \"print\" command, except that if you are running in the epoch\n\
-environment, the value is printed in its own window.");
+ c = add_com ("inspect", class_vars, inspect_command, _("\
+Same as \"print\" command, except that if you are running in the epoch\n\
+environment, the value is printed in its own window."));
set_cmd_completer (c, location_completer);
deprecated_add_show_from_set
{
init_procfs_ops ();
add_target (&procfs_ops);
- add_info ("proc", info_proc_cmd,
- "Show /proc process information about any running process.\n\
+ add_info ("proc", info_proc_cmd, _("\
+Show /proc process information about any running process.\n\
Specify process id, or use the program being debugged by default.\n\
-Specify keyword 'mappings' for detailed info on memory mappings.");
+Specify keyword 'mappings' for detailed info on memory mappings."));
add_com ("proc-trace-entry", no_class, proc_trace_sysentry_cmd,
- "Give a trace of entries into the syscall.");
+ _("Give a trace of entries into the syscall."));
add_com ("proc-trace-exit", no_class, proc_trace_sysexit_cmd,
- "Give a trace of exits from the syscall.");
+ _("Give a trace of exits from the syscall."));
add_com ("proc-untrace-entry", no_class, proc_untrace_sysentry_cmd,
- "Cancel a trace of entries into the syscall.");
+ _("Cancel a trace of entries into the syscall."));
add_com ("proc-untrace-exit", no_class, proc_untrace_sysexit_cmd,
- "Cancel a trace of exits from the syscall.");
+ _("Cancel a trace of exits from the syscall."));
}
/* =================== END, GDB "MODULE" =================== */
observer_attach_target_changed (regcache_observer_target_changed);
add_com ("flushregs", class_maintenance, reg_flush_command,
- "Force gdb to flush its register cache (maintainer command)");
+ _("Force gdb to flush its register cache (maintainer command)"));
/* Initialize the thread/process associated with the current set of
registers. For now, -1 is special, and means `no current process'. */
add_target (&e7000_ops);
add_com ("e7000", class_obscure, e7000_command,
- "Send a command to the e7000 monitor.");
+ _("Send a command to the e7000 monitor."));
add_com ("ftplogin", class_obscure, e7000_login_command,
- "Login to machine and change to directory.");
+ _("Login to machine and change to directory."));
add_com ("ftpload", class_obscure, e7000_ftp_command,
- "Fetch and load a file from previously described place.");
+ _("Fetch and load a file from previously described place."));
add_com ("drain", class_obscure, e7000_drain_command,
- "Drain pending e7000 text buffers.");
+ _("Drain pending e7000 text buffers."));
deprecated_add_show_from_set
(add_set_cmd ("usehardbreakpoints", no_class,
add_target (&m32r_ops);
add_com ("sdireset", class_obscure, sdireset_command,
- "Reset SDI connection.");
+ _("Reset SDI connection."));
add_com ("sdistatus", class_obscure, sdistatus_command,
- "Show status of SDI connection.");
+ _("Show status of SDI connection."));
add_com ("debug_chaos", class_obscure, debug_chaos_command,
- "Debug M32R/Chaos.");
+ _("Debug M32R/Chaos."));
add_com ("use_debug_dma", class_obscure, use_debug_dma_command,
- "Use debug DMA mem access.");
+ _("Use debug DMA mem access."));
add_com ("use_mon_code", class_obscure, use_mon_code_command,
- "Use mon code mem access.");
+ _("Use mon code mem access."));
add_com ("use_ib_break", class_obscure, use_ib_breakpoints_command,
- "Set breakpoints by IB break.");
+ _("Set breakpoints by IB break."));
add_com ("use_dbt_break", class_obscure, use_dbt_breakpoints_command,
- "Set breakpoints by dbt.");
+ _("Set breakpoints by dbt."));
}
&showlist);
add_com ("pmon <command>", class_obscure, pmon_command,
- "Send a packet to PMON (must be in debug mode).");
+ _("Send a packet to PMON (must be in debug mode)."));
deprecated_add_show_from_set
(add_set_cmd ("mask-address", no_class,
&showlist);
add_com ("sds", class_obscure, sds_command,
- "Send a command to the SDS monitor.");
+ _("Send a command to the SDS monitor."));
}
add_target (&gdbsim_ops);
add_com ("sim <command>", class_obscure, simulator_command,
- "Send a command to the simulator.");
+ _("Send a command to the simulator."));
}
init_st2000_ops ();
add_target (&st2000_ops);
add_com ("st2000 <command>", class_obscure, st2000_command,
- "Send a command to the STDBUG monitor.");
- add_com ("connect", class_obscure, connect_command,
- "Connect the terminal directly up to the STDBUG command monitor.\n\
-Use <CR>~. or <CR>~^D to break out.");
+ _("Send a command to the STDBUG monitor."));
+ add_com ("connect", class_obscure, connect_command, _("\
+Connect the terminal directly up to the STDBUG command monitor.\n\
+Use <CR>~. or <CR>~^D to break out."));
}
&showlist);
add_com ("remote <command>", class_obscure, sr_com,
- "Send a command to the remote monitor.");
+ _("Send a command to the remote monitor."));
}
static void
init_remote_threadtests (void)
{
- add_com ("tlist", class_obscure, threadlist_test_cmd,
- "Fetch and print the remote list of thread identifiers, one pkt only");
+ add_com ("tlist", class_obscure, threadlist_test_cmd, _("\
+Fetch and print the remote list of thread identifiers, one pkt only"));
add_com ("tinfo", class_obscure, threadinfo_test_cmd,
- "Fetch and display info about one thread");
+ _("Fetch and display info about one thread"));
add_com ("tset", class_obscure, threadset_test_cmd,
- "Test setting to a different thread");
+ _("Test setting to a different thread"));
add_com ("tupd", class_obscure, threadlist_update_test_cmd,
- "Iterate through updating all remote thread info");
+ _("Iterate through updating all remote thread info"));
add_com ("talive", class_obscure, threadalive_test,
- " Remote thread alive test ");
+ _(" Remote thread alive test "));
}
#endif /* 0 */
/* set/show remote ... */
- add_prefix_cmd ("remote", class_maintenance, set_remote_cmd, "\
+ add_prefix_cmd ("remote", class_maintenance, set_remote_cmd, _("\
Remote protocol specific variables\n\
Configure various remote-protocol specific variables such as\n\
-the packets being used",
+the packets being used"),
&remote_set_cmdlist, "set remote ",
0 /* allow-unknown */, &setlist);
- add_prefix_cmd ("remote", class_maintenance, show_remote_cmd, "\
+ add_prefix_cmd ("remote", class_maintenance, show_remote_cmd, _("\
Remote protocol specific variables\n\
Configure various remote-protocol specific variables such as\n\
-the packets being used",
+the packets being used"),
&remote_show_cmdlist, "show remote ",
0 /* allow-unknown */, &showlist);
/* Add root prefix command for "info powerpc" commands */
add_prefix_cmd ("powerpc", class_info, rs6000_info_powerpc_command,
- "Various POWERPC info specific commands.",
+ _("Various POWERPC info specific commands."),
&info_powerpc_cmdlist, "info powerpc ", 0, &infolist);
}
&showlist);
add_info ("serial", dos_info,
- "Print DOS serial port status.");
+ _("Print DOS serial port status."));
}
_initialize_serial (void)
{
#if 0
- add_com ("connect", class_obscure, connect_command,
- "Connect the terminal directly up to the command monitor.\n\
-Use <CR>~. or <CR>~^D to break out.");
+ add_com ("connect", class_obscure, connect_command, _("\
+Connect the terminal directly up to the command monitor.\n\
+Use <CR>~. or <CR>~^D to break out."));
#endif /* 0 */
- add_prefix_cmd ("serial", class_maintenance, serial_set_cmd, "\
-Set default serial/parallel port configuration.",
+ add_prefix_cmd ("serial", class_maintenance, serial_set_cmd, _("\
+Set default serial/parallel port configuration."),
&serial_set_cmdlist, "set serial ",
0/*allow-unknown*/,
&setlist);
- add_prefix_cmd ("serial", class_maintenance, serial_show_cmd, "\
-Show default serial/parallel port configuration.",
+ add_prefix_cmd ("serial", class_maintenance, serial_show_cmd, _("\
+Show default serial/parallel port configuration."),
&serial_show_cmdlist, "show serial ",
0/*allow-unknown*/,
&showlist);
gdbarch_register (bfd_arch_sh, sh_gdbarch_init, NULL);
- add_com ("regs", class_vars, sh_show_regs_command, "Print all registers");
+ add_com ("regs", class_vars, sh_show_regs_command, _("Print all registers"));
}
struct cmd_list_element *c;
add_com ("sharedlibrary", class_files, sharedlibrary_command,
- "Load shared object library symbols for files matching REGEXP.");
+ _("Load shared object library symbols for files matching REGEXP."));
add_info ("sharedlibrary", info_sharedlibrary_command,
- "Status of loaded shared object libraries.");
+ _("Status of loaded shared object libraries."));
add_com ("nosharedlibrary", class_files, no_shared_libraries,
- "Unload all shared object library symbols.");
+ _("Unload all shared object library symbols."));
deprecated_add_show_from_set
(add_set_cmd ("auto-solib-add", class_support, var_boolean,
_initialize_som_solib (void)
{
add_com ("sharedlibrary", class_files, som_solib_sharedlibrary_command,
- "Load shared object library symbols for files matching REGEXP.");
+ _("Load shared object library symbols for files matching REGEXP."));
add_info ("sharedlibrary", som_sharedlibrary_info_command,
- "Status of loaded shared object libraries.");
+ _("Status of loaded shared object libraries."));
deprecated_add_show_from_set
(add_set_cmd ("auto-solib-add", class_support, var_boolean,
}
add_info ("source", source_info,
- "Information about the current source file.");
+ _("Information about the current source file."));
- add_info ("line", line_info,
- concat ("Core addresses of the code for a source line.\n\
+ add_info ("line", line_info, _("\
+Core addresses of the code for a source line.\n\
Line can be specified as\n\
LINENUM, to list around that line in current file,\n\
FILE:LINENUM, to list around that line in that file,\n\
FUNCTION, to list around beginning of that function,\n\
FILE:FUNCTION, to distinguish among like-named static functions.\n\
-", "\
Default is to describe the last source line that was listed.\n\n\
This sets the default address for \"x\" to the line's first instruction\n\
so that \"x/i\" suffices to start examining the machine code.\n\
-The address is also stored as the value of \"$_\".", NULL));
+The address is also stored as the value of \"$_\"."));
- add_com ("forward-search", class_files, forward_search_command,
- "Search for regular expression (see regex(3)) from last line listed.\n\
-The matching line number is also stored as the value of \"$_\".");
+ add_com ("forward-search", class_files, forward_search_command, _("\
+Search for regular expression (see regex(3)) from last line listed.\n\
+The matching line number is also stored as the value of \"$_\"."));
add_com_alias ("search", "forward-search", class_files, 0);
- add_com ("reverse-search", class_files, reverse_search_command,
- "Search backward for regular expression (see regex(3)) from last line listed.\n\
-The matching line number is also stored as the value of \"$_\".");
+ add_com ("reverse-search", class_files, reverse_search_command, _("\
+Search backward for regular expression (see regex(3)) from last line listed.\n\
+The matching line number is also stored as the value of \"$_\"."));
if (xdb_commands)
{
backtrace_limit = 30;
#endif
- add_com ("return", class_stack, return_command,
- "Make selected stack frame return to its caller.\n\
+ add_com ("return", class_stack, return_command, _("\
+Make selected stack frame return to its caller.\n\
Control remains in the debugger, but when you continue\n\
execution will resume in the frame above the one now selected.\n\
-If an argument is given, it is an expression for the value to return.");
-
- add_com ("up", class_stack, up_command,
- "Select and print stack frame that called this one.\n\
-An argument says how many frames up to go.");
- add_com ("up-silently", class_support, up_silently_command,
- "Same as the `up' command, but does not print anything.\n\
-This is useful in command scripts.");
-
- add_com ("down", class_stack, down_command,
- "Select and print stack frame called by this one.\n\
-An argument says how many frames down to go.");
+If an argument is given, it is an expression for the value to return."));
+
+ add_com ("up", class_stack, up_command, _("\
+Select and print stack frame that called this one.\n\
+An argument says how many frames up to go."));
+ add_com ("up-silently", class_support, up_silently_command, _("\
+Same as the `up' command, but does not print anything.\n\
+This is useful in command scripts."));
+
+ add_com ("down", class_stack, down_command, _("\
+Select and print stack frame called by this one.\n\
+An argument says how many frames down to go."));
add_com_alias ("do", "down", class_stack, 1);
add_com_alias ("dow", "down", class_stack, 1);
- add_com ("down-silently", class_support, down_silently_command,
- "Same as the `down' command, but does not print anything.\n\
-This is useful in command scripts.");
+ add_com ("down-silently", class_support, down_silently_command, _("\
+Same as the `down' command, but does not print anything.\n\
+This is useful in command scripts."));
- add_com ("frame", class_stack, frame_command,
- "Select and print a stack frame.\n\
+ add_com ("frame", class_stack, frame_command, _("\
+Select and print a stack frame.\n\
With no argument, print the selected stack frame. (See also \"info frame\").\n\
An argument specifies the frame to select.\n\
It can be a stack frame number or the address of the frame.\n\
With argument, nothing is printed if input is coming from\n\
-a command file or a user-defined command.");
+a command file or a user-defined command."));
add_com_alias ("f", "frame", class_stack, 1);
if (xdb_commands)
{
add_com ("L", class_stack, current_frame_command,
- "Print the current stack frame.\n");
+ _("Print the current stack frame.\n"));
add_com_alias ("V", "frame", class_stack, 1);
}
- add_com ("select-frame", class_stack, select_frame_command,
- "Select a stack frame without printing anything.\n\
+ add_com ("select-frame", class_stack, select_frame_command, _("\
+Select a stack frame without printing anything.\n\
An argument specifies the frame to select.\n\
-It can be a stack frame number or the address of the frame.\n");
+It can be a stack frame number or the address of the frame.\n"));
- add_com ("backtrace", class_stack, backtrace_command,
- "Print backtrace of all stack frames, or innermost COUNT frames.\n\
+ add_com ("backtrace", class_stack, backtrace_command, _("\
+Print backtrace of all stack frames, or innermost COUNT frames.\n\
With a negative argument, print outermost -COUNT frames.\n\
-Use of the 'full' qualifier also prints the values of the local variables.\n");
+Use of the 'full' qualifier also prints the values of the local variables.\n"));
add_com_alias ("bt", "backtrace", class_stack, 0);
if (xdb_commands)
{
add_com_alias ("t", "backtrace", class_stack, 0);
- add_com ("T", class_stack, backtrace_full_command,
- "Print backtrace of all stack frames, or innermost COUNT frames \n\
+ add_com ("T", class_stack, backtrace_full_command, _("\
+Print backtrace of all stack frames, or innermost COUNT frames \n\
and the values of the local variables.\n\
With a negative argument, print outermost -COUNT frames.\n\
-Usage: T <count>\n");
+Usage: T <count>\n"));
}
add_com_alias ("where", "backtrace", class_alias, 0);
add_info ("stack", backtrace_command,
- "Backtrace of the stack, or innermost COUNT frames.");
+ _("Backtrace of the stack, or innermost COUNT frames."));
add_info_alias ("s", "stack", 1);
add_info ("frame", frame_info,
- "All about selected stack frame, or frame at ADDR.");
+ _("All about selected stack frame, or frame at ADDR."));
add_info_alias ("f", "frame", 1);
add_info ("locals", locals_info,
- "Local variables of current stack frame.");
+ _("Local variables of current stack frame."));
add_info ("args", args_info,
- "Argument variables of current stack frame.");
+ _("Argument variables of current stack frame."));
if (xdb_commands)
add_com ("l", class_info, args_plus_locals_info,
- "Argument and local variables of current stack frame.");
+ _("Argument and local variables of current stack frame."));
if (dbx_commands)
- add_com ("func", class_stack, func_command,
- "Select the stack frame that contains <func>.\nUsage: func <name>\n");
+ add_com ("func", class_stack, func_command, _("\
+Select the stack frame that contains <func>.\n\
+Usage: func <name>\n"));
add_info ("catch", catch_info,
- "Exceptions that can be caught in the current stack frame.");
+ _("Exceptions that can be caught in the current stack frame."));
#if 0
add_cmd ("backtrace-limit", class_stack, set_backtrace_limit_command, _(\
"Specify maximum number of frames for \"backtrace\" to print by default."),
&setlist);
- add_info ("backtrace-limit", backtrace_limit_info,
- "The maximum number of frames for \"backtrace\" to print by default.");
+ add_info ("backtrace-limit", backtrace_limit_info, _("\
+The maximum number of frames for \"backtrace\" to print by default."));
#endif
}
&showlist);
add_prefix_cmd ("overlay", class_support, overlay_command,
- "Commands for debugging overlays.", &overlaylist,
+ _("Commands for debugging overlays."), &overlaylist,
"overlay ", 0, &cmdlist);
add_com_alias ("ovly", "overlay", class_alias, 1);
set_cmd_cfunc (c, set_ext_lang_command);
add_info ("extensions", info_ext_lang_command,
- "All filename extensions associated with a source language.");
+ _("All filename extensions associated with a source language."));
deprecated_add_show_from_set
(add_set_cmd ("download-write-size", class_obscure,
void
_initialize_symtab (void)
{
- add_info ("variables", variables_info,
- "All global and static variable names, or those matching REGEXP.");
+ add_info ("variables", variables_info, _("\
+All global and static variable names, or those matching REGEXP."));
if (dbx_commands)
- add_com ("whereis", class_info, variables_info,
- "All global and static variable names, or those matching REGEXP.");
+ add_com ("whereis", class_info, variables_info, _("\
+All global and static variable names, or those matching REGEXP."));
add_info ("functions", functions_info,
- "All function names, or those matching REGEXP.");
+ _("All function names, or those matching REGEXP."));
/* FIXME: This command has at least the following problems:
I also think "ptype" or "whatis" is more likely to be useful (but if
there is much disagreement "info types" can be fixed). */
add_info ("types", types_info,
- "All type names, or those matching REGEXP.");
+ _("All type names, or those matching REGEXP."));
add_info ("sources", sources_info,
- "Source files in the program.");
+ _("Source files in the program."));
add_com ("rbreak", class_breakpoint, rbreak_command,
- "Set a breakpoint for all functions matching REGEXP.");
+ _("Set a breakpoint for all functions matching REGEXP."));
if (xdb_commands)
{
- add_com ("lf", class_info, sources_info, "Source files in the program");
- add_com ("lg", class_info, variables_info,
- "All global and static variable names, or those matching REGEXP.");
+ add_com ("lf", class_info, sources_info,
+ _("Source files in the program"));
+ add_com ("lg", class_info, variables_info, _("\
+All global and static variable names, or those matching REGEXP."));
}
/* Initialize the one built-in type that isn't language dependent... */
target_structs[target_struct_size++] = t;
if (targetlist == NULL)
- add_prefix_cmd ("target", class_run, target_command,
- "Connect to a target machine or process.\n\
+ add_prefix_cmd ("target", class_run, target_command, _("\
+Connect to a target machine or process.\n\
The first argument is the type or protocol of the target machine.\n\
Remaining arguments are interpreted by the target protocol. For more\n\
information on the arguments for a particular protocol, type\n\
-`help target ' followed by the protocol name.",
+`help target ' followed by the protocol name."),
&targetlist, "target ", 0, &cmdlist);
add_cmd (t->to_shortname, no_class, t->to_open, t->to_doc, &targetlist);
}
&setlist, &showlist);
add_com ("monitor", class_obscure, do_monitor_command,
- "Send a command to the remote monitor (remote targets only).");
+ _("Send a command to the remote monitor (remote targets only)."));
target_dcache = dcache_init ();
}
static struct cmd_list_element *thread_apply_list = NULL;
add_info ("threads", info_threads_command,
- "IDs of currently known threads.");
+ _("IDs of currently known threads."));
- add_prefix_cmd ("thread", class_run, thread_command,
- "Use this command to switch between threads.\n\
-The new thread ID must be currently known.", &thread_cmd_list, "thread ", 1, &cmdlist);
+ add_prefix_cmd ("thread", class_run, thread_command, _("\
+Use this command to switch between threads.\n\
+The new thread ID must be currently known."),
+ &thread_cmd_list, "thread ", 1, &cmdlist);
add_prefix_cmd ("apply", class_run, thread_apply_command,
- "Apply a command to a list of threads.",
+ _("Apply a command to a list of threads."),
&thread_apply_list, "apply ", 1, &thread_cmd_list);
add_cmd ("all", class_run, thread_apply_all_command,
deprecated_add_show_from_set (c, &showlist);
set_cmd_sfunc (c, set_async_prompt);
- add_com ("dont-repeat", class_support, dont_repeat_command, "Don't repeat this command.\n\
+ add_com ("dont-repeat", class_support, dont_repeat_command, _("\
+Don't repeat this command.\n\
Primarily used inside of user-defined commands that should not be repeated when\n\
-hitting return.");
+hitting return."));
c = add_set_cmd ("editing", class_support, var_boolean, (char *) &async_command_editing_p,
"Set editing of command lines as they are typed.\n\
}
add_info ("scope", scope_info,
- "List the variables local to a scope");
+ _("List the variables local to a scope"));
add_cmd ("tracepoints", class_trace, NULL,
_("Tracing of program execution without stopping the program."),
&cmdlist);
- add_info ("tracepoints", tracepoints_info,
- "Status of tracepoints, or tracepoint number NUMBER.\n\
+ add_info ("tracepoints", tracepoints_info, _("\
+Status of tracepoints, or tracepoint number NUMBER.\n\
Convenience variable \"$tpnum\" contains the number of the\n\
-last tracepoint set.");
+last tracepoint set."));
add_info_alias ("tp", "tracepoints", 1);
- c = add_com ("save-tracepoints", class_trace, tracepoint_save_command,
- "Save current tracepoint definitions as a script.\n\
-Use the 'source' command in another debug session to restore them.");
+ c = add_com ("save-tracepoints", class_trace, tracepoint_save_command, _("\
+Save current tracepoint definitions as a script.\n\
+Use the 'source' command in another debug session to restore them."));
set_cmd_completer (c, filename_completer);
add_com ("tdump", class_trace, trace_dump_command,
- "Print everything collected at the current tracepoint.");
+ _("Print everything collected at the current tracepoint."));
- add_prefix_cmd ("tfind", class_trace, trace_find_command,
- "Select a trace frame;\n\
-No argument means forward by one frame; '-' means backward by one frame.",
+ add_prefix_cmd ("tfind", class_trace, trace_find_command, _("\
+Select a trace frame;\n\
+No argument means forward by one frame; '-' means backward by one frame."),
&tfindlist, "tfind ", 1, &cmdlist);
add_cmd ("outside", class_trace, trace_find_outside_command, _("\
&tfindlist);
add_com ("tstatus", class_trace, trace_status_command,
- "Display the status of the current trace data collection.");
+ _("Display the status of the current trace data collection."));
add_com ("tstop", class_trace, trace_stop_command,
- "Stop trace data collection.");
+ _("Stop trace data collection."));
add_com ("tstart", class_trace, trace_start_command,
- "Start trace data collection.");
+ _("Start trace data collection."));
- add_com ("passcount", class_trace, trace_pass_command,
- "Set the passcount for a tracepoint.\n\
+ add_com ("passcount", class_trace, trace_pass_command, _("\
+Set the passcount for a tracepoint.\n\
The trace will end when the tracepoint has been passed 'count' times.\n\
Usage: passcount COUNT TPNUM, where TPNUM may also be \"all\";\n\
-if TPNUM is omitted, passcount refers to the last tracepoint defined.");
+if TPNUM is omitted, passcount refers to the last tracepoint defined."));
- add_com ("end", class_trace, end_actions_pseudocommand,
- "Ends a list of commands or actions.\n\
+ add_com ("end", class_trace, end_actions_pseudocommand, _("\
+Ends a list of commands or actions.\n\
Several GDB commands allow you to enter a list of commands or actions.\n\
Entering \"end\" on a line by itself is the normal way to terminate\n\
such a list.\n\n\
-Note: the \"end\" command cannot be used at the gdb prompt.");
+Note: the \"end\" command cannot be used at the gdb prompt."));
- add_com ("while-stepping", class_trace, while_stepping_pseudocommand,
- "Specify single-stepping behavior at a tracepoint.\n\
+ add_com ("while-stepping", class_trace, while_stepping_pseudocommand, _("\
+Specify single-stepping behavior at a tracepoint.\n\
Argument is number of instructions to trace in single-step mode\n\
following the tracepoint. This command is normally followed by\n\
one or more \"collect\" commands, to specify what to collect\n\
while single-stepping.\n\n\
-Note: this command can only be used in a tracepoint \"actions\" list.");
+Note: this command can only be used in a tracepoint \"actions\" list."));
add_com_alias ("ws", "while-stepping", class_alias, 0);
add_com_alias ("stepping", "while-stepping", class_alias, 0);
- add_com ("collect", class_trace, collect_pseudocommand,
- "Specify one or more data items to be collected at a tracepoint.\n\
+ add_com ("collect", class_trace, collect_pseudocommand, _("\
+Specify one or more data items to be collected at a tracepoint.\n\
Accepts a comma-separated list of (one or more) expressions. GDB will\n\
collect all data (variables, registers) referenced by that expression.\n\
Also accepts the following special arguments:\n\
$regs -- all registers.\n\
$args -- all function arguments.\n\
$locals -- all variables local to the block/function scope.\n\
-Note: this command can only be used in a tracepoint \"actions\" list.");
+Note: this command can only be used in a tracepoint \"actions\" list."));
- add_com ("actions", class_trace, trace_actions_command,
- "Specify the actions to be taken at a tracepoint.\n\
+ add_com ("actions", class_trace, trace_actions_command, _("\
+Specify the actions to be taken at a tracepoint.\n\
Tracepoint actions may include collecting of specified data, \n\
single-stepping, or enabling/disabling other tracepoints, \n\
-depending on target's capabilities.");
+depending on target's capabilities."));
add_cmd ("tracepoints", class_trace, delete_trace_command, _("\
Delete specified tracepoints.\n\
No argument means enable all tracepoints."),
&enablelist);
- c = add_com ("trace", class_trace, trace_command,
- "Set a tracepoint at a specified line or function or address.\n\
+ c = add_com ("trace", class_trace, trace_command, _("\
+Set a tracepoint at a specified line or function or address.\n\
Argument may be a line number, function name, or '*' plus an address.\n\
For a line number or function, trace at the start of its code.\n\
If an address is specified, trace at that exact address.\n\n\
-Do \"help tracepoints\" for info on other tracepoint commands.");
+Do \"help tracepoints\" for info on other tracepoint commands."));
set_cmd_completer (c, location_completer);
add_com_alias ("tp", "trace", class_alias, 0);
void
_initialize_tui_layout (void)
{
- add_com ("layout", class_tui, tui_layout_command,
- "Change the layout of windows.\n\
+ add_com ("layout", class_tui, tui_layout_command, _("\
+Change the layout of windows.\n\
Usage: layout prev | next | <layout_name> \n\
Layout names are:\n\
src : Displays source and command windows.\n\
register window is displayed. If the\n\
source/assembly/command (split) is displayed, \n\
the register window is displayed with \n\
- the window that has current logical focus.\n");
+ the window that has current logical focus.\n"));
if (xdb_commands)
{
- add_com ("td", class_tui, tui_toggle_layout_command,
- "Toggle between Source/Command and Disassembly/Command layouts.\n");
- add_com ("ts", class_tui, tui_toggle_split_layout_command,
- "Toggle between Source/Command or Disassembly/Command and \n\
-Source/Disassembly/Command layouts.\n");
+ add_com ("td", class_tui, tui_toggle_layout_command, _("\
+Toggle between Source/Command and Disassembly/Command layouts.\n"));
+ add_com ("ts", class_tui, tui_toggle_split_layout_command, _("\
+Toggle between Source/Command or Disassembly/Command and \n\
+Source/Disassembly/Command layouts.\n"));
}
}
tuicmd = tui_get_cmd_list ();
add_prefix_cmd ("reg", class_tui, tui_reg_command,
- "TUI commands to control the register window.",
+ _("TUI commands to control the register window."),
&tuireglist, "tui reg ", 0,
tuicmd);
if (xdb_commands)
{
add_com ("fr", class_tui, tui_reg_float_command,
- "Display only floating point registers\n");
+ _("Display only floating point registers\n"));
add_com ("gr", class_tui, tui_reg_general_command,
- "Display only general registers\n");
+ _("Display only general registers\n"));
add_com ("sr", class_tui, tui_reg_system_command,
- "Display only special registers\n");
+ _("Display only special registers\n"));
add_com ("+r", class_tui, tui_scroll_regs_forward_command,
- "Scroll the registers window forward\n");
+ _("Scroll the registers window forward\n"));
add_com ("-r", class_tui, tui_scroll_regs_backward_command,
- "Scroll the register window backward\n");
+ _("Scroll the register window backward\n"));
}
}
void
_initialize_tui_stack (void)
{
- add_com ("update", class_tui, tui_update_command,
- "Update the source window and locator to display the current "
- "execution point.\n");
+ add_com ("update", class_tui, tui_update_command, _("\
+Update the source window and locator to display the current execution point.\n"));
}
/* Command to update the display with the current execution point. */
{
if (tuilist == 0)
add_prefix_cmd ("tui", class_tui, tui_command,
- "Text User Interface commands.",
+ _("Text User Interface commands."),
&tuilist, "tui ", 0, &cmdlist);
return &tuilist;
}
/* Define the classes of commands.
They will appear in the help list in the reverse of this order. */
add_prefix_cmd ("tui", class_tui, set_tui_cmd,
- "TUI configuration variables",
+ _("TUI configuration variables"),
&tui_setlist, "set tui ",
0/*allow-unknown*/, &setlist);
add_prefix_cmd ("tui", class_tui, show_tui_cmd,
- "TUI configuration variables",
+ _("TUI configuration variables"),
&tui_showlist, "show tui ",
0/*allow-unknown*/, &showlist);
add_com ("refresh", class_tui, tui_refresh_all_command,
- "Refresh the terminal display.\n");
+ _("Refresh the terminal display.\n"));
if (xdb_commands)
add_com_alias ("U", "refresh", class_tui, 0);
- add_com ("tabset", class_tui, tui_set_tab_width_command,
- "Set the width (in characters) of tab stops.\n\
-Usage: tabset <n>\n");
- add_com ("winheight", class_tui, tui_set_win_height_command,
- "Set the height of a specified window.\n\
+ add_com ("tabset", class_tui, tui_set_tab_width_command, _("\
+Set the width (in characters) of tab stops.\n\
+Usage: tabset <n>\n"));
+ add_com ("winheight", class_tui, tui_set_win_height_command, _("\
+Set the height of a specified window.\n\
Usage: winheight <win_name> [+ | -] <#lines>\n\
Window names are:\n\
src : the source window\n\
cmd : the command window\n\
asm : the disassembly window\n\
-regs : the register display\n");
+regs : the register display\n"));
add_com_alias ("wh", "winheight", class_tui, 0);
add_info ("win", tui_all_windows_info,
- "List of all displayed windows.\n");
- add_com ("focus", class_tui, tui_set_focus_command,
- "Set focus to named window or next/prev window.\n\
+ _("List of all displayed windows.\n"));
+ add_com ("focus", class_tui, tui_set_focus_command, _("\
+Set focus to named window or next/prev window.\n\
Usage: focus {<win> | next | prev}\n\
Valid Window names are:\n\
src : the source window\n\
asm : the disassembly window\n\
regs : the register display\n\
-cmd : the command window\n");
+cmd : the command window\n"));
add_com_alias ("fs", "focus", class_tui, 0);
- add_com ("+", class_tui, tui_scroll_forward_command,
- "Scroll window forward.\nUsage: + [win] [n]\n");
- add_com ("-", class_tui, tui_scroll_backward_command,
- "Scroll window backward.\nUsage: - [win] [n]\n");
- add_com ("<", class_tui, tui_scroll_left_command,
- "Scroll window forward.\nUsage: < [win] [n]\n");
- add_com (">", class_tui, tui_scroll_right_command,
- "Scroll window backward.\nUsage: > [win] [n]\n");
+ add_com ("+", class_tui, tui_scroll_forward_command, _("\
+Scroll window forward.\n\
+Usage: + [win] [n]\n"));
+ add_com ("-", class_tui, tui_scroll_backward_command, _("\
+Scroll window backward.\n\
+Usage: - [win] [n]\n"));
+ add_com ("<", class_tui, tui_scroll_left_command, _("\
+Scroll window forward.\n\
+Usage: < [win] [n]\n"));
+ add_com (">", class_tui, tui_scroll_right_command, _("\
+Scroll window backward.\n\
+Usage: > [win] [n]\n"));
if (xdb_commands)
- add_com ("w", class_xdb, tui_xdb_set_win_height_command,
- "XDB compatibility command for setting the height of a command window.\n\
-Usage: w <#lines>\n");
+ add_com ("w", class_xdb, tui_xdb_set_win_height_command, _("\
+XDB compatibility command for setting the height of a command window.\n\
+Usage: w <#lines>\n"));
/* Define the tui control variables. */
c = add_set_enum_cmd
_initialize_typeprint (void)
{
- add_com ("ptype", class_vars, ptype_command,
- "Print definition of type TYPE.\n\
+ add_com ("ptype", class_vars, ptype_command, _("\
+Print definition of type TYPE.\n\
Argument may be a type name defined by typedef, or \"struct STRUCT-TAG\"\n\
or \"class CLASS-NAME\" or \"union UNION-TAG\" or \"enum ENUM-TAG\".\n\
-The selected stack frame's lexical context is used to look up the name.");
+The selected stack frame's lexical context is used to look up the name."));
add_com ("whatis", class_vars, whatis_command,
- "Print data type of expression EXP.");
+ _("Print data type of expression EXP."));
}
if (xdb_commands)
{
add_com ("am", class_support, pagination_on_command,
- "Enable pagination");
+ _("Enable pagination"));
add_com ("sm", class_support, pagination_off_command,
- "Disable pagination");
+ _("Disable pagination"));
}
deprecated_add_show_from_set
struct cmd_list_element *c;
add_prefix_cmd ("print", no_class, set_print,
- "Generic command for setting how things print.",
+ _("Generic command for setting how things print."),
&setprintlist, "set print ", 0, &setlist);
add_alias_cmd ("p", "print", no_class, 1, &setlist);
/* prefer set print to set prompt */
add_alias_cmd ("pr", "print", no_class, 1, &setlist);
add_prefix_cmd ("print", no_class, show_print,
- "Generic command for showing print settings.",
+ _("Generic command for showing print settings."),
&showprintlist, "show print ", 0, &showlist);
add_alias_cmd ("p", "print", no_class, 1, &showlist);
add_alias_cmd ("pr", "print", no_class, 1, &showlist);
init_child_ops ();
c = add_com ("dll-symbols", class_files, dll_symbol_command,
- "Load dll library symbols from FILE.");
+ _("Load dll library symbols from FILE."));
set_cmd_completer (c, filename_completer);
add_com_alias ("sharedlibrary", "dll-symbols", class_alias, 1);
&setlist),
&showlist);
- add_info ("dll", info_dll_command, "Status of loaded DLLs.");
+ add_info ("dll", info_dll_command, _("Status of loaded DLLs."));
add_info_alias ("sharedlibrary", "dll", 1);
add_prefix_cmd ("w32", class_info, info_w32_command,
- "Print information specific to Win32 debugging.",
+ _("Print information specific to Win32 debugging."),
&info_w32_cmdlist, "info w32 ", 0, &infolist);
add_cmd ("selector", class_info, display_selectors,
init_child_ops ();
c = add_com ("dll-symbols", class_files, dll_symbol_command,
- "Load dll library symbols from FILE.");
+ _("Load dll library symbols from FILE."));
set_cmd_completer (c, filename_completer);
add_com_alias ("sharedlibrary", "dll-symbols", class_alias, 1);
&setlist),
&showlist);
- add_info ("dll", info_dll_command, "Status of loaded DLLs.");
+ add_info ("dll", info_dll_command, _("Status of loaded DLLs."));
add_info_alias ("sharedlibrary", "dll", 1);
add_prefix_cmd ("w32", class_info, info_w32_command,
- "Print information specific to Win32 debugging.",
+ _("Print information specific to Win32 debugging."),
&info_w32_cmdlist, "info w32 ", 0, &infolist);
add_cmd ("selector", class_info, display_selectors,
_initialize_xcoffsolib (void)
{
add_com ("sharedlibrary", class_files, sharedlibrary_command,
- "Load shared object library symbols for files matching REGEXP.");
+ _("Load shared object library symbols for files matching REGEXP."));
add_info ("sharedlibrary", solib_info,
- "Status of loaded shared object libraries");
+ _("Status of loaded shared object libraries"));
deprecated_add_show_from_set
(add_set_cmd ("auto-solib-add", class_support, var_boolean,
projects / binutils-gdb.git / commitdiff