+++ /dev/null
- MAINTAINERS | 6 +-
- MAKEALL | 3 +
- Makefile | 13 +-
- README | 4 +-
- board/atmel/atngw100/Makefile | 40 ++++
- board/atmel/atngw100/atngw100.c | 73 +++++++
- board/atmel/atngw100/config.mk | 3 +
- board/atmel/atngw100/eth.c | 36 ++++
- board/atmel/atngw100/flash.c | 232 +++++++++++++++++++++
- board/atmel/atngw100/u-boot.lds | 80 +++++++
- cpu/at32ap/at32ap7000/Makefile | 43 ----
- cpu/at32ap/at32ap7000/gpio.c | 137 ------------
- cpu/at32ap/at32ap700x/Makefile | 43 ++++
- cpu/at32ap/at32ap700x/gpio.c | 144 +++++++++++++
- cpu/at32ap/atmel_mci.c | 13 +-
- include/asm-avr32/arch-at32ap7000/clk.h | 70 ------
- include/asm-avr32/arch-at32ap7000/gpio.h | 212 -------------------
- include/asm-avr32/arch-at32ap7000/hmatrix2.h | 232 ---------------------
- include/asm-avr32/arch-at32ap7000/memory-map.h | 66 ------
- include/asm-avr32/arch-at32ap7000/mmc.h | 96 ---------
- include/asm-avr32/arch-at32ap700x/chip-features.h | 34 +++
- include/asm-avr32/arch-at32ap700x/clk.h | 78 +++++++
- include/asm-avr32/arch-at32ap700x/gpio.h | 220 +++++++++++++++++++
- include/asm-avr32/arch-at32ap700x/hmatrix2.h | 232 +++++++++++++++++++++
- include/asm-avr32/arch-at32ap700x/memory-map.h | 66 ++++++
- include/asm-avr32/arch-at32ap700x/mmc.h | 96 +++++++++
- include/configs/atngw100.h | 177 ++++++++++++++++
- include/configs/atstk1002.h | 4 +-
- include/configs/atstk1003.h | 184 ++++++++++++++++
- include/configs/atstk1004.h | 185 ++++++++++++++++
- lib_avr32/board.c | 10 +
- net/eth.c | 4 +
- 32 files changed, 1966 insertions(+), 870 deletions(-)
- create mode 100644 board/atmel/atngw100/Makefile
- create mode 100644 board/atmel/atngw100/atngw100.c
- create mode 100644 board/atmel/atngw100/config.mk
- create mode 100644 board/atmel/atngw100/eth.c
- create mode 100644 board/atmel/atngw100/flash.c
- create mode 100644 board/atmel/atngw100/u-boot.lds
- delete mode 100644 cpu/at32ap/at32ap7000/Makefile
- delete mode 100644 cpu/at32ap/at32ap7000/gpio.c
- create mode 100644 cpu/at32ap/at32ap700x/Makefile
- create mode 100644 cpu/at32ap/at32ap700x/gpio.c
- delete mode 100644 include/asm-avr32/arch-at32ap7000/clk.h
- delete mode 100644 include/asm-avr32/arch-at32ap7000/gpio.h
- delete mode 100644 include/asm-avr32/arch-at32ap7000/hmatrix2.h
- delete mode 100644 include/asm-avr32/arch-at32ap7000/memory-map.h
- delete mode 100644 include/asm-avr32/arch-at32ap7000/mmc.h
- create mode 100644 include/asm-avr32/arch-at32ap700x/chip-features.h
- create mode 100644 include/asm-avr32/arch-at32ap700x/clk.h
- create mode 100644 include/asm-avr32/arch-at32ap700x/gpio.h
- create mode 100644 include/asm-avr32/arch-at32ap700x/hmatrix2.h
- create mode 100644 include/asm-avr32/arch-at32ap700x/memory-map.h
- create mode 100644 include/asm-avr32/arch-at32ap700x/mmc.h
- create mode 100644 include/configs/atngw100.h
- create mode 100644 include/configs/atstk1003.h
- create mode 100644 include/configs/atstk1004.h
-
-diff --git a/MAINTAINERS b/MAINTAINERS
-index b8c1fdc..457dce3 100644
---- a/MAINTAINERS
-+++ b/MAINTAINERS
-@@ -630,7 +630,11 @@ Hayden Fraser <Hayden.Fraser@freescale.com>
-
- Haavard Skinnemoen <hskinnemoen@atmel.com>
-
-- ATSTK1000 AT32AP7000
-+ ATSTK1000 AT32AP7xxx
-+ ATSTK1002 AT32AP7000
-+ ATSTK1003 AT32AP7001
-+ ATSTK1004 AT32AP7002
-+ ATNGW100 AT32AP7000
-
- #########################################################################
- # End of MAINTAINERS list #
-diff --git a/MAKEALL b/MAKEALL
-index 20ef4e1..1538478 100755
---- a/MAKEALL
-+++ b/MAKEALL
-@@ -641,6 +641,9 @@ LIST_coldfire=" \
-
- LIST_avr32=" \
- atstk1002 \
-+ atstk1003 \
-+ atstk1004 \
-+ atngw100 \
- "
-
- #########################################################################
-diff --git a/Makefile b/Makefile
-index ac4b430..2db97fd 100644
---- a/Makefile
-+++ b/Makefile
-@@ -24,7 +24,7 @@
- VERSION = 1
- PATCHLEVEL = 3
- SUBLEVEL = 0
--EXTRAVERSION =
-+EXTRAVERSION = .atmel.2
- U_BOOT_VERSION = $(VERSION).$(PATCHLEVEL).$(SUBLEVEL)$(EXTRAVERSION)
- VERSION_FILE = $(obj)include/version_autogenerated.h
-
-@@ -2607,7 +2607,16 @@ bf561-ezkit_config: unconfig
- #########################################################################
-
- atstk1002_config : unconfig
-- @$(MKCONFIG) $(@:_config=) avr32 at32ap atstk1000 atmel at32ap7000
-+ @$(MKCONFIG) $(@:_config=) avr32 at32ap atstk1000 atmel at32ap700x
-+
-+atstk1003_config : unconfig
-+ @$(MKCONFIG) $(@:_config=) avr32 at32ap atstk1000 atmel at32ap700x
-+
-+atstk1004_config : unconfig
-+ @$(MKCONFIG) $(@:_config=) avr32 at32ap atstk1000 atmel at32ap700x
-+
-+atngw100_config : unconfig
-+ @$(MKCONFIG) $(@:_config=) avr32 at32ap atngw100 atmel at32ap700x
-
- #########################################################################
- #########################################################################
-diff --git a/README b/README
-index 3dad5fc..26f93c2 100644
---- a/README
-+++ b/README
-@@ -235,9 +235,7 @@ The following options need to be configured:
- - Board Type: Define exactly one, e.g. CONFIG_MPC8540ADS.
-
- - CPU Daughterboard Type: (if CONFIG_ATSTK1000 is defined)
-- Define exactly one of
-- CONFIG_ATSTK1002
--
-+ Define exactly one, e.g. CONFIG_ATSTK1002
-
- - CPU Module Type: (if CONFIG_COGENT is defined)
- Define exactly one of
-diff --git a/board/atmel/atngw100/Makefile b/board/atmel/atngw100/Makefile
-new file mode 100644
-index 0000000..f1ea6e6
---- /dev/null
-+++ b/board/atmel/atngw100/Makefile
-@@ -0,0 +1,40 @@
-+#
-+# Copyright (C) 2005-2006 Atmel Corporation
-+#
-+# See file CREDITS for list of people who contributed to this project.
-+#
-+# This program is free software; you can redistribute it and/or
-+# modify it under the terms of the GNU General Public License as
-+# published by the Free Software Foundation; either version 2 of
-+# the License, or (at your option) any later version.
-+#
-+# This program is distributed in the hope that it will be useful,
-+# but WITHOUT ANY WARRANTY; without even the implied warranty of
-+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-+# GNU General Public License for more details.
-+#
-+# You should have received a copy of the GNU General Public License
-+# along with this program; if not, write to the Free Software
-+# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
-+# MA 02111-1307 USA
-+
-+include $(TOPDIR)/config.mk
-+
-+LIB := $(obj)lib$(BOARD).a
-+
-+COBJS := $(BOARD).o flash.o eth.o
-+
-+SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c)
-+OBJS := $(addprefix $(obj),$(SOBJS) $(COBJS))
-+
-+$(LIB): $(obj).depend $(OBJS)
-+ $(AR) $(ARFLAGS) $@ $(OBJS)
-+
-+#########################################################################
-+
-+# defines $(obj).depend target
-+include $(SRCTREE)/rules.mk
-+
-+sinclude $(obj).depend
-+
-+#########################################################################
-diff --git a/board/atmel/atngw100/atngw100.c b/board/atmel/atngw100/atngw100.c
-new file mode 100644
-index 0000000..bd4b6b4
---- /dev/null
-+++ b/board/atmel/atngw100/atngw100.c
-@@ -0,0 +1,73 @@
-+/*
-+ * Copyright (C) 2006 Atmel Corporation
-+ *
-+ * See file CREDITS for list of people who contributed to this
-+ * project.
-+ *
-+ * This program is free software; you can redistribute it and/or
-+ * modify it under the terms of the GNU General Public License as
-+ * published by the Free Software Foundation; either version 2 of
-+ * the License, or (at your option) any later version.
-+ *
-+ * This program is distributed in the hope that it will be useful,
-+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
-+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-+ * GNU General Public License for more details.
-+ *
-+ * You should have received a copy of the GNU General Public License
-+ * along with this program; if not, write to the Free Software
-+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
-+ * MA 02111-1307 USA
-+ */
-+#include <common.h>
-+
-+#include <asm/io.h>
-+#include <asm/sdram.h>
-+#include <asm/arch/gpio.h>
-+#include <asm/arch/hmatrix2.h>
-+
-+DECLARE_GLOBAL_DATA_PTR;
-+
-+static const struct sdram_info sdram = {
-+ .phys_addr = CFG_SDRAM_BASE,
-+ .row_bits = 13,
-+ .col_bits = 9,
-+ .bank_bits = 2,
-+ .cas = 3,
-+ .twr = 2,
-+ .trc = 7,
-+ .trp = 2,
-+ .trcd = 2,
-+ .tras = 5,
-+ .txsr = 5,
-+};
-+
-+int board_early_init_f(void)
-+{
-+ /* Set the SDRAM_ENABLE bit in the HEBI SFR */
-+ hmatrix2_writel(SFR4, 1 << 1);
-+
-+ gpio_enable_ebi();
-+ gpio_enable_usart1();
-+
-+#if defined(CONFIG_MACB)
-+ gpio_enable_macb0();
-+ gpio_enable_macb1();
-+#endif
-+#if defined(CONFIG_MMC)
-+ gpio_enable_mmci();
-+#endif
-+
-+ return 0;
-+}
-+
-+long int initdram(int board_type)
-+{
-+ return sdram_init(&sdram);
-+}
-+
-+void board_init_info(void)
-+{
-+ gd->bd->bi_phy_id[0] = 0x01;
-+ gd->bd->bi_phy_id[1] = 0x03;
-+}
-diff --git a/board/atmel/atngw100/config.mk b/board/atmel/atngw100/config.mk
-new file mode 100644
-index 0000000..9a794e5
---- /dev/null
-+++ b/board/atmel/atngw100/config.mk
-@@ -0,0 +1,3 @@
-+TEXT_BASE = 0x00000000
-+PLATFORM_RELFLAGS += -ffunction-sections -fdata-sections
-+PLATFORM_LDFLAGS += --gc-sections
-diff --git a/board/atmel/atngw100/eth.c b/board/atmel/atngw100/eth.c
-new file mode 100644
-index 0000000..d1d57bb
---- /dev/null
-+++ b/board/atmel/atngw100/eth.c
-@@ -0,0 +1,36 @@
-+/*
-+ * Copyright (C) 2006 Atmel Corporation
-+ *
-+ * Ethernet initialization for the AVR32 Network Gateway
-+ *
-+ * See file CREDITS for list of people who contributed to this
-+ * project.
-+ *
-+ * This program is free software; you can redistribute it and/or
-+ * modify it under the terms of the GNU General Public License as
-+ * published by the Free Software Foundation; either version 2 of
-+ * the License, or (at your option) any later version.
-+ *
-+ * This program is distributed in the hope that it will be useful,
-+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
-+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-+ * GNU General Public License for more details.
-+ *
-+ * You should have received a copy of the GNU General Public License
-+ * along with this program; if not, write to the Free Software
-+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
-+ * MA 02111-1307 USA
-+ */
-+#include <common.h>
-+
-+#include <asm/arch/memory-map.h>
-+
-+extern int macb_eth_initialize(int id, void *regs, unsigned int phy_addr);
-+
-+#ifdef CONFIG_CMD_NET
-+void atngw100_eth_initialize(bd_t *bi)
-+{
-+ macb_eth_initialize(0, (void *)MACB0_BASE, bi->bi_phy_id[0]);
-+ macb_eth_initialize(1, (void *)MACB1_BASE, bi->bi_phy_id[1]);
-+}
-+#endif
-diff --git a/board/atmel/atngw100/flash.c b/board/atmel/atngw100/flash.c
-new file mode 100644
-index 0000000..2d9423f
---- /dev/null
-+++ b/board/atmel/atngw100/flash.c
-@@ -0,0 +1,232 @@
-+/*
-+ * Copyright (C) 2006 Atmel Corporation
-+ *
-+ * See file CREDITS for list of people who contributed to this
-+ * project.
-+ *
-+ * This program is free software; you can redistribute it and/or
-+ * modify it under the terms of the GNU General Public License as
-+ * published by the Free Software Foundation; either version 2 of
-+ * the License, or (at your option) any later version.
-+ *
-+ * This program is distributed in the hope that it will be useful,
-+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
-+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-+ * GNU General Public License for more details.
-+ *
-+ * You should have received a copy of the GNU General Public License
-+ * along with this program; if not, write to the Free Software
-+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
-+ * MA 02111-1307 USA
-+ */
-+#include <common.h>
-+
-+#ifdef CONFIG_ATNGW100_EXT_FLASH
-+#include <asm/cacheflush.h>
-+#include <asm/io.h>
-+#include <asm/sections.h>
-+
-+DECLARE_GLOBAL_DATA_PTR;
-+
-+flash_info_t flash_info[1];
-+
-+static void __flashprog flash_identify(uint16_t *flash, flash_info_t *info)
-+{
-+ unsigned long flags;
-+
-+ flags = disable_interrupts();
-+
-+ dcache_flush_unlocked();
-+
-+ writew(0xaa, flash + 0x555);
-+ writew(0x55, flash + 0xaaa);
-+ writew(0x90, flash + 0x555);
-+ info->flash_id = readl(flash);
-+ writew(0xff, flash);
-+
-+ readw(flash);
-+
-+ if (flags)
-+ enable_interrupts();
-+}
-+
-+unsigned long flash_init(void)
-+{
-+ unsigned long addr;
-+ unsigned int i;
-+
-+ flash_info[0].size = CFG_FLASH_SIZE;
-+ flash_info[0].sector_count = 135;
-+
-+ flash_identify(uncached((void *)CFG_FLASH_BASE), &flash_info[0]);
-+
-+ for (i = 0, addr = 0; i < 8; i++, addr += 0x2000)
-+ flash_info[0].start[i] = addr;
-+ for (; i < flash_info[0].sector_count; i++, addr += 0x10000)
-+ flash_info[0].start[i] = addr;
-+
-+ return CFG_FLASH_SIZE;
-+}
-+
-+void flash_print_info(flash_info_t *info)
-+{
-+ printf("Flash: Vendor ID: 0x%02x, Product ID: 0x%02x\n",
-+ info->flash_id >> 16, info->flash_id & 0xffff);
-+ printf("Size: %ld MB in %d sectors\n",
-+ info->size >> 10, info->sector_count);
-+}
-+
-+int __flashprog flash_erase(flash_info_t *info, int s_first, int s_last)
-+{
-+ unsigned long flags;
-+ unsigned long start_time;
-+ uint16_t *fb, *sb;
-+ unsigned int i;
-+ int ret;
-+ uint16_t status;
-+
-+ if ((s_first < 0) || (s_first > s_last)
-+ || (s_last >= info->sector_count)) {
-+ puts("Error: first and/or last sector out of range\n");
-+ return ERR_INVAL;
-+ }
-+
-+ for (i = s_first; i < s_last; i++)
-+ if (info->protect[i]) {
-+ printf("Error: sector %d is protected\n", i);
-+ return ERR_PROTECTED;
-+ }
-+
-+ fb = (uint16_t *)uncached(info->start[0]);
-+
-+ dcache_flush_unlocked();
-+
-+ for (i = s_first; (i <= s_last) && !ctrlc(); i++) {
-+ printf("Erasing sector %3d...", i);
-+
-+ sb = (uint16_t *)uncached(info->start[i]);
-+
-+ flags = disable_interrupts();
-+
-+ start_time = get_timer(0);
-+
-+ /* Unlock sector */
-+ writew(0xaa, fb + 0x555);
-+ writew(0x70, sb);
-+
-+ /* Erase sector */
-+ writew(0xaa, fb + 0x555);
-+ writew(0x55, fb + 0xaaa);
-+ writew(0x80, fb + 0x555);
-+ writew(0xaa, fb + 0x555);
-+ writew(0x55, fb + 0xaaa);
-+ writew(0x30, sb);
-+
-+ /* Wait for completion */
-+ ret = ERR_OK;
-+ do {
-+ /* TODO: Timeout */
-+ status = readw(sb);
-+ } while ((status != 0xffff) && !(status & 0x28));
-+
-+ writew(0xf0, fb);
-+
-+ /*
-+ * Make sure the command actually makes it to the bus
-+ * before we re-enable interrupts.
-+ */
-+ readw(fb);
-+
-+ if (flags)
-+ enable_interrupts();
-+
-+ if (status != 0xffff) {
-+ printf("Flash erase error at address 0x%p: 0x%02x\n",
-+ sb, status);
-+ ret = ERR_PROG_ERROR;
-+ break;
-+ }
-+ }
-+
-+ if (ctrlc())
-+ printf("User interrupt!\n");
-+
-+ return ERR_OK;
-+}
-+
-+int __flashprog write_buff(flash_info_t *info, uchar *src,
-+ ulong addr, ulong count)
-+{
-+ unsigned long flags;
-+ uint16_t *base, *p, *s, *end;
-+ uint16_t word, status, status1;
-+ int ret = ERR_OK;
-+
-+ if (addr < info->start[0]
-+ || (addr + count) > (info->start[0] + info->size)
-+ || (addr + count) < addr) {
-+ puts("Error: invalid address range\n");
-+ return ERR_INVAL;
-+ }
-+
-+ if (addr & 1 || count & 1 || (unsigned int)src & 1) {
-+ puts("Error: misaligned source, destination or count\n");
-+ return ERR_ALIGN;
-+ }
-+
-+ base = (uint16_t *)uncached(info->start[0]);
-+ end = (uint16_t *)uncached(addr + count);
-+
-+ flags = disable_interrupts();
-+
-+ dcache_flush_unlocked();
-+ sync_write_buffer();
-+
-+ for (p = (uint16_t *)uncached(addr), s = (uint16_t *)src;
-+ p < end && !ctrlc(); p++, s++) {
-+ word = *s;
-+
-+ writew(0xaa, base + 0x555);
-+ writew(0x55, base + 0xaaa);
-+ writew(0xa0, base + 0x555);
-+ writew(word, p);
-+
-+ sync_write_buffer();
-+
-+ /* Wait for completion */
-+ status1 = readw(p);
-+ do {
-+ /* TODO: Timeout */
-+ status = status1;
-+ status1 = readw(p);
-+ } while (((status ^ status1) & 0x40) /* toggled */
-+ && !(status1 & 0x28)); /* error bits */
-+
-+ /*
-+ * We'll need to check once again for toggle bit
-+ * because the toggle bit may stop toggling as I/O5
-+ * changes to "1" (ref at49bv642.pdf p9)
-+ */
-+ status1 = readw(p);
-+ status = readw(p);
-+ if ((status ^ status1) & 0x40) {
-+ printf("Flash write error at address 0x%p: "
-+ "0x%02x != 0x%02x\n",
-+ p, status,word);
-+ ret = ERR_PROG_ERROR;
-+ writew(0xf0, base);
-+ readw(base);
-+ break;
-+ }
-+
-+ writew(0xf0, base);
-+ readw(base);
-+ }
-+
-+ if (flags)
-+ enable_interrupts();
-+
-+ return ret;
-+}
-+
-+#endif /* CONFIG_ATSTK1000_EXT_FLASH */
-diff --git a/board/atmel/atngw100/u-boot.lds b/board/atmel/atngw100/u-boot.lds
-new file mode 100644
-index 0000000..34e347a
---- /dev/null
-+++ b/board/atmel/atngw100/u-boot.lds
-@@ -0,0 +1,80 @@
-+/* -*- Fundamental -*-
-+ *
-+ * Copyright (C) 2005-2006 Atmel Corporation
-+ *
-+ * See file CREDITS for list of people who contributed to this
-+ * project.
-+ *
-+ * This program is free software; you can redistribute it and/or
-+ * modify it under the terms of the GNU General Public License as
-+ * published by the Free Software Foundation; either version 2 of
-+ * the License, or (at your option) any later version.
-+ *
-+ * This program is distributed in the hope that it will be useful,
-+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
-+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-+ * GNU General Public License for more details.
-+ *
-+ * You should have received a copy of the GNU General Public License
-+ * along with this program; if not, write to the Free Software
-+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
-+ * MA 02111-1307 USA
-+ */
-+OUTPUT_FORMAT("elf32-avr32", "elf32-avr32", "elf32-avr32")
-+OUTPUT_ARCH(avr32)
-+ENTRY(_start)
-+
-+SECTIONS
-+{
-+ . = 0;
-+ _text = .;
-+ .text : {
-+ *(.text)
-+ *(.text.*)
-+ }
-+
-+ . = ALIGN(32);
-+ __flashprog_start = .;
-+ .flashprog : {
-+ *(.flashprog)
-+ }
-+ . = ALIGN(32);
-+ __flashprog_end = .;
-+ _etext = .;
-+
-+ .rodata : {
-+ *(.rodata)
-+ *(.rodata.*)
-+ }
-+
-+ . = ALIGN(8);
-+ _data = .;
-+ .data : {
-+ *(.data)
-+ *(.data.*)
-+ }
-+
-+ . = ALIGN(4);
-+ __u_boot_cmd_start = .;
-+ .u_boot_cmd : {
-+ KEEP(*(.u_boot_cmd))
-+ }
-+ __u_boot_cmd_end = .;
-+
-+ . = ALIGN(4);
-+ _got = .;
-+ .got : {
-+ *(.got)
-+ }
-+ _egot = .;
-+
-+ . = ALIGN(8);
-+ _edata = .;
-+
-+ .bss : {
-+ *(.bss)
-+ *(.bss.*)
-+ }
-+ . = ALIGN(8);
-+ _end = .;
-+}
-diff --git a/cpu/at32ap/at32ap7000/Makefile b/cpu/at32ap/at32ap7000/Makefile
-deleted file mode 100644
-index d276712..0000000
---- a/cpu/at32ap/at32ap7000/Makefile
-+++ /dev/null
-@@ -1,43 +0,0 @@
--#
--# Copyright (C) 2005-2006 Atmel Corporation
--#
--# See file CREDITS for list of people who contributed to this
--# project.
--#
--# This program is free software; you can redistribute it and/or
--# modify it under the terms of the GNU General Public License as
--# published by the Free Software Foundation; either version 2 of
--# the License, or (at your option) any later version.
--#
--# This program is distributed in the hope that it will be useful,
--# but WITHOUT ANY WARRANTY; without even the implied warranty of
--# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
--# GNU General Public License for more details.
--#
--# You should have received a copy of the GNU General Public License
--# along with this program; if not, write to the Free Software
--# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
--# MA 02111-1307 USA
--#
--
--include $(TOPDIR)/config.mk
--
--LIB := $(obj)lib$(SOC).a
--
--COBJS := gpio.o
--SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c)
--OBJS := $(addprefix $(obj),$(SOBJS) $(COBJS))
--
--all: $(obj).depend $(LIB)
--
--$(LIB): $(OBJS)
-- $(AR) $(ARFLAGS) $@ $^
--
--#########################################################################
--
--# defines $(obj).depend target
--include $(SRCTREE)/rules.mk
--
--sinclude $(obj).depend
--
--#########################################################################
-diff --git a/cpu/at32ap/at32ap7000/gpio.c b/cpu/at32ap/at32ap7000/gpio.c
-deleted file mode 100644
-index 52f5372..0000000
---- a/cpu/at32ap/at32ap7000/gpio.c
-+++ /dev/null
-@@ -1,137 +0,0 @@
--/*
-- * Copyright (C) 2006 Atmel Corporation
-- *
-- * See file CREDITS for list of people who contributed to this
-- * project.
-- *
-- * This program is free software; you can redistribute it and/or
-- * modify it under the terms of the GNU General Public License as
-- * published by the Free Software Foundation; either version 2 of
-- * the License, or (at your option) any later version.
-- *
-- * This program is distributed in the hope that it will be useful,
-- * but WITHOUT ANY WARRANTY; without even the implied warranty of
-- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-- * GNU General Public License for more details.
-- *
-- * You should have received a copy of the GNU General Public License
-- * along with this program; if not, write to the Free Software
-- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
-- * MA 02111-1307 USA
-- */
--#include <common.h>
--
--#include <asm/arch/gpio.h>
--
--/*
-- * Lots of small functions here. We depend on --gc-sections getting
-- * rid of the ones we don't need.
-- */
--void gpio_enable_ebi(void)
--{
--#ifdef CFG_HSDRAMC
--#ifndef CFG_SDRAM_16BIT
-- gpio_select_periph_A(GPIO_PIN_PE0, 0);
-- gpio_select_periph_A(GPIO_PIN_PE1, 0);
-- gpio_select_periph_A(GPIO_PIN_PE2, 0);
-- gpio_select_periph_A(GPIO_PIN_PE3, 0);
-- gpio_select_periph_A(GPIO_PIN_PE4, 0);
-- gpio_select_periph_A(GPIO_PIN_PE5, 0);
-- gpio_select_periph_A(GPIO_PIN_PE6, 0);
-- gpio_select_periph_A(GPIO_PIN_PE7, 0);
-- gpio_select_periph_A(GPIO_PIN_PE8, 0);
-- gpio_select_periph_A(GPIO_PIN_PE9, 0);
-- gpio_select_periph_A(GPIO_PIN_PE10, 0);
-- gpio_select_periph_A(GPIO_PIN_PE11, 0);
-- gpio_select_periph_A(GPIO_PIN_PE12, 0);
-- gpio_select_periph_A(GPIO_PIN_PE13, 0);
-- gpio_select_periph_A(GPIO_PIN_PE14, 0);
-- gpio_select_periph_A(GPIO_PIN_PE15, 0);
--#endif
-- gpio_select_periph_A(GPIO_PIN_PE26, 0);
--#endif
--}
--
--void gpio_enable_usart0(void)
--{
-- gpio_select_periph_B(GPIO_PIN_PA8, 0);
-- gpio_select_periph_B(GPIO_PIN_PA9, 0);
--}
--
--void gpio_enable_usart1(void)
--{
-- gpio_select_periph_A(GPIO_PIN_PA17, 0);
-- gpio_select_periph_A(GPIO_PIN_PA18, 0);
--}
--
--void gpio_enable_usart2(void)
--{
-- gpio_select_periph_B(GPIO_PIN_PB26, 0);
-- gpio_select_periph_B(GPIO_PIN_PB27, 0);
--}
--
--void gpio_enable_usart3(void)
--{
-- gpio_select_periph_B(GPIO_PIN_PB18, 0);
-- gpio_select_periph_B(GPIO_PIN_PB19, 0);
--}
--
--void gpio_enable_macb0(void)
--{
-- gpio_select_periph_A(GPIO_PIN_PC3, 0); /* TXD0 */
-- gpio_select_periph_A(GPIO_PIN_PC4, 0); /* TXD1 */
-- gpio_select_periph_A(GPIO_PIN_PC7, 0); /* TXEN */
-- gpio_select_periph_A(GPIO_PIN_PC8, 0); /* TXCK */
-- gpio_select_periph_A(GPIO_PIN_PC9, 0); /* RXD0 */
-- gpio_select_periph_A(GPIO_PIN_PC10, 0); /* RXD1 */
-- gpio_select_periph_A(GPIO_PIN_PC13, 0); /* RXER */
-- gpio_select_periph_A(GPIO_PIN_PC15, 0); /* RXDV */
-- gpio_select_periph_A(GPIO_PIN_PC16, 0); /* MDC */
-- gpio_select_periph_A(GPIO_PIN_PC17, 0); /* MDIO */
--#if !defined(CONFIG_RMII)
-- gpio_select_periph_A(GPIO_PIN_PC0, 0); /* COL */
-- gpio_select_periph_A(GPIO_PIN_PC1, 0); /* CRS */
-- gpio_select_periph_A(GPIO_PIN_PC2, 0); /* TXER */
-- gpio_select_periph_A(GPIO_PIN_PC5, 0); /* TXD2 */
-- gpio_select_periph_A(GPIO_PIN_PC6, 0); /* TXD3 */
-- gpio_select_periph_A(GPIO_PIN_PC11, 0); /* RXD2 */
-- gpio_select_periph_A(GPIO_PIN_PC12, 0); /* RXD3 */
-- gpio_select_periph_A(GPIO_PIN_PC14, 0); /* RXCK */
-- gpio_select_periph_A(GPIO_PIN_PC18, 0); /* SPD */
--#endif
--}
--
--void gpio_enable_macb1(void)
--{
-- gpio_select_periph_B(GPIO_PIN_PD13, 0); /* TXD0 */
-- gpio_select_periph_B(GPIO_PIN_PD14, 0); /* TXD1 */
-- gpio_select_periph_B(GPIO_PIN_PD11, 0); /* TXEN */
-- gpio_select_periph_B(GPIO_PIN_PD12, 0); /* TXCK */
-- gpio_select_periph_B(GPIO_PIN_PD10, 0); /* RXD0 */
-- gpio_select_periph_B(GPIO_PIN_PD6, 0); /* RXD1 */
-- gpio_select_periph_B(GPIO_PIN_PD5, 0); /* RXER */
-- gpio_select_periph_B(GPIO_PIN_PD4, 0); /* RXDV */
-- gpio_select_periph_B(GPIO_PIN_PD3, 0); /* MDC */
-- gpio_select_periph_B(GPIO_PIN_PD2, 0); /* MDIO */
--#if !defined(CONFIG_RMII)
-- gpio_select_periph_B(GPIO_PIN_PC19, 0); /* COL */
-- gpio_select_periph_B(GPIO_PIN_PC23, 0); /* CRS */
-- gpio_select_periph_B(GPIO_PIN_PC26, 0); /* TXER */
-- gpio_select_periph_B(GPIO_PIN_PC27, 0); /* TXD2 */
-- gpio_select_periph_B(GPIO_PIN_PC28, 0); /* TXD3 */
-- gpio_select_periph_B(GPIO_PIN_PC29, 0); /* RXD2 */
-- gpio_select_periph_B(GPIO_PIN_PC30, 0); /* RXD3 */
-- gpio_select_periph_B(GPIO_PIN_PC24, 0); /* RXCK */
-- gpio_select_periph_B(GPIO_PIN_PD15, 0); /* SPD */
--#endif
--}
--
--void gpio_enable_mmci(void)
--{
-- gpio_select_periph_A(GPIO_PIN_PA10, 0); /* CLK */
-- gpio_select_periph_A(GPIO_PIN_PA11, 0); /* CMD */
-- gpio_select_periph_A(GPIO_PIN_PA12, 0); /* DATA0 */
-- gpio_select_periph_A(GPIO_PIN_PA13, 0); /* DATA1 */
-- gpio_select_periph_A(GPIO_PIN_PA14, 0); /* DATA2 */
-- gpio_select_periph_A(GPIO_PIN_PA15, 0); /* DATA3 */
--}
-diff --git a/cpu/at32ap/at32ap700x/Makefile b/cpu/at32ap/at32ap700x/Makefile
-new file mode 100644
-index 0000000..d276712
---- /dev/null
-+++ b/cpu/at32ap/at32ap700x/Makefile
-@@ -0,0 +1,43 @@
-+#
-+# Copyright (C) 2005-2006 Atmel Corporation
-+#
-+# See file CREDITS for list of people who contributed to this
-+# project.
-+#
-+# This program is free software; you can redistribute it and/or
-+# modify it under the terms of the GNU General Public License as
-+# published by the Free Software Foundation; either version 2 of
-+# the License, or (at your option) any later version.
-+#
-+# This program is distributed in the hope that it will be useful,
-+# but WITHOUT ANY WARRANTY; without even the implied warranty of
-+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-+# GNU General Public License for more details.
-+#
-+# You should have received a copy of the GNU General Public License
-+# along with this program; if not, write to the Free Software
-+# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
-+# MA 02111-1307 USA
-+#
-+
-+include $(TOPDIR)/config.mk
-+
-+LIB := $(obj)lib$(SOC).a
-+
-+COBJS := gpio.o
-+SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c)
-+OBJS := $(addprefix $(obj),$(SOBJS) $(COBJS))
-+
-+all: $(obj).depend $(LIB)
-+
-+$(LIB): $(OBJS)
-+ $(AR) $(ARFLAGS) $@ $^
-+
-+#########################################################################
-+
-+# defines $(obj).depend target
-+include $(SRCTREE)/rules.mk
-+
-+sinclude $(obj).depend
-+
-+#########################################################################
-diff --git a/cpu/at32ap/at32ap700x/gpio.c b/cpu/at32ap/at32ap700x/gpio.c
-new file mode 100644
-index 0000000..859124a
---- /dev/null
-+++ b/cpu/at32ap/at32ap700x/gpio.c
-@@ -0,0 +1,144 @@
-+/*
-+ * Copyright (C) 2006 Atmel Corporation
-+ *
-+ * See file CREDITS for list of people who contributed to this
-+ * project.
-+ *
-+ * This program is free software; you can redistribute it and/or
-+ * modify it under the terms of the GNU General Public License as
-+ * published by the Free Software Foundation; either version 2 of
-+ * the License, or (at your option) any later version.
-+ *
-+ * This program is distributed in the hope that it will be useful,
-+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
-+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-+ * GNU General Public License for more details.
-+ *
-+ * You should have received a copy of the GNU General Public License
-+ * along with this program; if not, write to the Free Software
-+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
-+ * MA 02111-1307 USA
-+ */
-+#include <common.h>
-+
-+#include <asm/arch/chip-features.h>
-+#include <asm/arch/gpio.h>
-+
-+/*
-+ * Lots of small functions here. We depend on --gc-sections getting
-+ * rid of the ones we don't need.
-+ */
-+void gpio_enable_ebi(void)
-+{
-+#ifdef CFG_HSDRAMC
-+#ifndef CFG_SDRAM_16BIT
-+ gpio_select_periph_A(GPIO_PIN_PE0, 0);
-+ gpio_select_periph_A(GPIO_PIN_PE1, 0);
-+ gpio_select_periph_A(GPIO_PIN_PE2, 0);
-+ gpio_select_periph_A(GPIO_PIN_PE3, 0);
-+ gpio_select_periph_A(GPIO_PIN_PE4, 0);
-+ gpio_select_periph_A(GPIO_PIN_PE5, 0);
-+ gpio_select_periph_A(GPIO_PIN_PE6, 0);
-+ gpio_select_periph_A(GPIO_PIN_PE7, 0);
-+ gpio_select_periph_A(GPIO_PIN_PE8, 0);
-+ gpio_select_periph_A(GPIO_PIN_PE9, 0);
-+ gpio_select_periph_A(GPIO_PIN_PE10, 0);
-+ gpio_select_periph_A(GPIO_PIN_PE11, 0);
-+ gpio_select_periph_A(GPIO_PIN_PE12, 0);
-+ gpio_select_periph_A(GPIO_PIN_PE13, 0);
-+ gpio_select_periph_A(GPIO_PIN_PE14, 0);
-+ gpio_select_periph_A(GPIO_PIN_PE15, 0);
-+#endif
-+ gpio_select_periph_A(GPIO_PIN_PE26, 0);
-+#endif
-+}
-+
-+#ifdef AT32AP700x_CHIP_HAS_USART
-+void gpio_enable_usart0(void)
-+{
-+ gpio_select_periph_B(GPIO_PIN_PA8, 0);
-+ gpio_select_periph_B(GPIO_PIN_PA9, 0);
-+}
-+
-+void gpio_enable_usart1(void)
-+{
-+ gpio_select_periph_A(GPIO_PIN_PA17, 0);
-+ gpio_select_periph_A(GPIO_PIN_PA18, 0);
-+}
-+
-+void gpio_enable_usart2(void)
-+{
-+ gpio_select_periph_B(GPIO_PIN_PB26, 0);
-+ gpio_select_periph_B(GPIO_PIN_PB27, 0);
-+}
-+
-+void gpio_enable_usart3(void)
-+{
-+ gpio_select_periph_B(GPIO_PIN_PB17, 0);
-+ gpio_select_periph_B(GPIO_PIN_PB18, 0);
-+}
-+#endif
-+
-+#ifdef AT32AP700x_CHIP_HAS_MACB
-+void gpio_enable_macb0(void)
-+{
-+ gpio_select_periph_A(GPIO_PIN_PC3, 0); /* TXD0 */
-+ gpio_select_periph_A(GPIO_PIN_PC4, 0); /* TXD1 */
-+ gpio_select_periph_A(GPIO_PIN_PC7, 0); /* TXEN */
-+ gpio_select_periph_A(GPIO_PIN_PC8, 0); /* TXCK */
-+ gpio_select_periph_A(GPIO_PIN_PC9, 0); /* RXD0 */
-+ gpio_select_periph_A(GPIO_PIN_PC10, 0); /* RXD1 */
-+ gpio_select_periph_A(GPIO_PIN_PC13, 0); /* RXER */
-+ gpio_select_periph_A(GPIO_PIN_PC15, 0); /* RXDV */
-+ gpio_select_periph_A(GPIO_PIN_PC16, 0); /* MDC */
-+ gpio_select_periph_A(GPIO_PIN_PC17, 0); /* MDIO */
-+#if !defined(CONFIG_RMII)
-+ gpio_select_periph_A(GPIO_PIN_PC0, 0); /* COL */
-+ gpio_select_periph_A(GPIO_PIN_PC1, 0); /* CRS */
-+ gpio_select_periph_A(GPIO_PIN_PC2, 0); /* TXER */
-+ gpio_select_periph_A(GPIO_PIN_PC5, 0); /* TXD2 */
-+ gpio_select_periph_A(GPIO_PIN_PC6, 0); /* TXD3 */
-+ gpio_select_periph_A(GPIO_PIN_PC11, 0); /* RXD2 */
-+ gpio_select_periph_A(GPIO_PIN_PC12, 0); /* RXD3 */
-+ gpio_select_periph_A(GPIO_PIN_PC14, 0); /* RXCK */
-+ gpio_select_periph_A(GPIO_PIN_PC18, 0); /* SPD */
-+#endif
-+}
-+
-+void gpio_enable_macb1(void)
-+{
-+ gpio_select_periph_B(GPIO_PIN_PD13, 0); /* TXD0 */
-+ gpio_select_periph_B(GPIO_PIN_PD14, 0); /* TXD1 */
-+ gpio_select_periph_B(GPIO_PIN_PD11, 0); /* TXEN */
-+ gpio_select_periph_B(GPIO_PIN_PD12, 0); /* TXCK */
-+ gpio_select_periph_B(GPIO_PIN_PD10, 0); /* RXD0 */
-+ gpio_select_periph_B(GPIO_PIN_PD6, 0); /* RXD1 */
-+ gpio_select_periph_B(GPIO_PIN_PD5, 0); /* RXER */
-+ gpio_select_periph_B(GPIO_PIN_PD4, 0); /* RXDV */
-+ gpio_select_periph_B(GPIO_PIN_PD3, 0); /* MDC */
-+ gpio_select_periph_B(GPIO_PIN_PD2, 0); /* MDIO */
-+#if !defined(CONFIG_RMII)
-+ gpio_select_periph_B(GPIO_PIN_PC19, 0); /* COL */
-+ gpio_select_periph_B(GPIO_PIN_PC23, 0); /* CRS */
-+ gpio_select_periph_B(GPIO_PIN_PC26, 0); /* TXER */
-+ gpio_select_periph_B(GPIO_PIN_PC27, 0); /* TXD2 */
-+ gpio_select_periph_B(GPIO_PIN_PC28, 0); /* TXD3 */
-+ gpio_select_periph_B(GPIO_PIN_PC29, 0); /* RXD2 */
-+ gpio_select_periph_B(GPIO_PIN_PC30, 0); /* RXD3 */
-+ gpio_select_periph_B(GPIO_PIN_PC24, 0); /* RXCK */
-+ gpio_select_periph_B(GPIO_PIN_PD15, 0); /* SPD */
-+#endif
-+}
-+#endif
-+
-+#ifdef AT32AP700x_CHIP_HAS_MMCI
-+void gpio_enable_mmci(void)
-+{
-+ gpio_select_periph_A(GPIO_PIN_PA10, 0); /* CLK */
-+ gpio_select_periph_A(GPIO_PIN_PA11, 0); /* CMD */
-+ gpio_select_periph_A(GPIO_PIN_PA12, 0); /* DATA0 */
-+ gpio_select_periph_A(GPIO_PIN_PA13, 0); /* DATA1 */
-+ gpio_select_periph_A(GPIO_PIN_PA14, 0); /* DATA2 */
-+ gpio_select_periph_A(GPIO_PIN_PA15, 0); /* DATA3 */
-+}
-+#endif
-diff --git a/cpu/at32ap/atmel_mci.c b/cpu/at32ap/atmel_mci.c
-index cf48be1..f59dfb5 100644
---- a/cpu/at32ap/atmel_mci.c
-+++ b/cpu/at32ap/atmel_mci.c
-@@ -198,11 +198,11 @@ mmc_bread(int dev, unsigned long start, lbaint_t blkcnt,
-
- /* Put the device into Transfer state */
- ret = mmc_cmd(MMC_CMD_SELECT_CARD, mmc_rca << 16, resp, R1 | NCR);
-- if (ret) goto fail;
-+ if (ret) goto out;
-
- /* Set block length */
- ret = mmc_cmd(MMC_CMD_SET_BLOCKLEN, mmc_blkdev.blksz, resp, R1 | NCR);
-- if (ret) goto fail;
-+ if (ret) goto out;
-
- pr_debug("MCI_DTOR = %08lx\n", mmci_readl(DTOR));
-
-@@ -211,7 +211,7 @@ mmc_bread(int dev, unsigned long start, lbaint_t blkcnt,
- start * mmc_blkdev.blksz, resp,
- (R1 | NCR | TRCMD_START | TRDIR_READ
- | TRTYP_BLOCK));
-- if (ret) goto fail;
-+ if (ret) goto out;
-
- ret = -EIO;
- wordcount = 0;
-@@ -219,7 +219,7 @@ mmc_bread(int dev, unsigned long start, lbaint_t blkcnt,
- do {
- status = mmci_readl(SR);
- if (status & (ERROR_FLAGS | MMCI_BIT(OVRE)))
-- goto fail;
-+ goto read_error;
- } while (!(status & MMCI_BIT(RXRDY)));
-
- if (status & MMCI_BIT(RXRDY)) {
-@@ -244,9 +244,10 @@ out:
- mmc_cmd(MMC_CMD_SELECT_CARD, 0, resp, NCR);
- return i;
-
--fail:
-+read_error:
- mmc_cmd(MMC_CMD_SEND_STATUS, mmc_rca << 16, &card_status, R1 | NCR);
-- printf("mmc: bread failed, card status = %08x\n", card_status);
-+ printf("mmc: bread failed, status = %08x, card status = %08x\n",
-+ status, card_status);
- goto out;
- }
-
-diff --git a/include/asm-avr32/arch-at32ap7000/clk.h b/include/asm-avr32/arch-at32ap7000/clk.h
-deleted file mode 100644
-index 7e20d97..0000000
---- a/include/asm-avr32/arch-at32ap7000/clk.h
-+++ /dev/null
-@@ -1,70 +0,0 @@
--/*
-- * Copyright (C) 2006 Atmel Corporation
-- *
-- * See file CREDITS for list of people who contributed to this
-- * project.
-- *
-- * This program is free software; you can redistribute it and/or
-- * modify it under the terms of the GNU General Public License as
-- * published by the Free Software Foundation; either version 2 of
-- * the License, or (at your option) any later version.
-- *
-- * This program is distributed in the hope that it will be useful,
-- * but WITHOUT ANY WARRANTY; without even the implied warranty of
-- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-- * GNU General Public License for more details.
-- *
-- * You should have received a copy of the GNU General Public License
-- * along with this program; if not, write to the Free Software
-- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
-- * MA 02111-1307 USA
-- */
--#ifndef __ASM_AVR32_ARCH_CLK_H__
--#define __ASM_AVR32_ARCH_CLK_H__
--
--#ifdef CONFIG_PLL
--#define MAIN_CLK_RATE ((CFG_OSC0_HZ / CFG_PLL0_DIV) * CFG_PLL0_MUL)
--#else
--#define MAIN_CLK_RATE (CFG_OSC0_HZ)
--#endif
--
--static inline unsigned long get_cpu_clk_rate(void)
--{
-- return MAIN_CLK_RATE >> CFG_CLKDIV_CPU;
--}
--static inline unsigned long get_hsb_clk_rate(void)
--{
-- return MAIN_CLK_RATE >> CFG_CLKDIV_HSB;
--}
--static inline unsigned long get_pba_clk_rate(void)
--{
-- return MAIN_CLK_RATE >> CFG_CLKDIV_PBA;
--}
--static inline unsigned long get_pbb_clk_rate(void)
--{
-- return MAIN_CLK_RATE >> CFG_CLKDIV_PBB;
--}
--
--/* Accessors for specific devices. More will be added as needed. */
--static inline unsigned long get_sdram_clk_rate(void)
--{
-- return get_hsb_clk_rate();
--}
--static inline unsigned long get_usart_clk_rate(unsigned int dev_id)
--{
-- return get_pba_clk_rate();
--}
--static inline unsigned long get_macb_pclk_rate(unsigned int dev_id)
--{
-- return get_pbb_clk_rate();
--}
--static inline unsigned long get_macb_hclk_rate(unsigned int dev_id)
--{
-- return get_hsb_clk_rate();
--}
--static inline unsigned long get_mci_clk_rate(void)
--{
-- return get_pbb_clk_rate();
--}
--
--#endif /* __ASM_AVR32_ARCH_CLK_H__ */
-diff --git a/include/asm-avr32/arch-at32ap7000/gpio.h b/include/asm-avr32/arch-at32ap7000/gpio.h
-deleted file mode 100644
-index e4812d4..0000000
---- a/include/asm-avr32/arch-at32ap7000/gpio.h
-+++ /dev/null
-@@ -1,212 +0,0 @@
--/*
-- * Copyright (C) 2006 Atmel Corporation
-- *
-- * See file CREDITS for list of people who contributed to this
-- * project.
-- *
-- * This program is free software; you can redistribute it and/or
-- * modify it under the terms of the GNU General Public License as
-- * published by the Free Software Foundation; either version 2 of
-- * the License, or (at your option) any later version.
-- *
-- * This program is distributed in the hope that it will be useful,
-- * but WITHOUT ANY WARRANTY; without even the implied warranty of
-- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-- * GNU General Public License for more details.
-- *
-- * You should have received a copy of the GNU General Public License
-- * along with this program; if not, write to the Free Software
-- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
-- * MA 02111-1307 USA
-- */
--#ifndef __ASM_AVR32_ARCH_GPIO_H__
--#define __ASM_AVR32_ARCH_GPIO_H__
--
--#include <asm/arch/memory-map.h>
--
--#define NR_GPIO_CONTROLLERS 5
--
--/*
-- * Pin numbers identifying specific GPIO pins on the chip.
-- */
--#define GPIO_PIOA_BASE (0)
--#define GPIO_PIN_PA0 (GPIO_PIOA_BASE + 0)
--#define GPIO_PIN_PA1 (GPIO_PIOA_BASE + 1)
--#define GPIO_PIN_PA2 (GPIO_PIOA_BASE + 2)
--#define GPIO_PIN_PA3 (GPIO_PIOA_BASE + 3)
--#define GPIO_PIN_PA4 (GPIO_PIOA_BASE + 4)
--#define GPIO_PIN_PA5 (GPIO_PIOA_BASE + 5)
--#define GPIO_PIN_PA6 (GPIO_PIOA_BASE + 6)
--#define GPIO_PIN_PA7 (GPIO_PIOA_BASE + 7)
--#define GPIO_PIN_PA8 (GPIO_PIOA_BASE + 8)
--#define GPIO_PIN_PA9 (GPIO_PIOA_BASE + 9)
--#define GPIO_PIN_PA10 (GPIO_PIOA_BASE + 10)
--#define GPIO_PIN_PA11 (GPIO_PIOA_BASE + 11)
--#define GPIO_PIN_PA12 (GPIO_PIOA_BASE + 12)
--#define GPIO_PIN_PA13 (GPIO_PIOA_BASE + 13)
--#define GPIO_PIN_PA14 (GPIO_PIOA_BASE + 14)
--#define GPIO_PIN_PA15 (GPIO_PIOA_BASE + 15)
--#define GPIO_PIN_PA16 (GPIO_PIOA_BASE + 16)
--#define GPIO_PIN_PA17 (GPIO_PIOA_BASE + 17)
--#define GPIO_PIN_PA18 (GPIO_PIOA_BASE + 18)
--#define GPIO_PIN_PA19 (GPIO_PIOA_BASE + 19)
--#define GPIO_PIN_PA20 (GPIO_PIOA_BASE + 20)
--#define GPIO_PIN_PA21 (GPIO_PIOA_BASE + 21)
--#define GPIO_PIN_PA22 (GPIO_PIOA_BASE + 22)
--#define GPIO_PIN_PA23 (GPIO_PIOA_BASE + 23)
--#define GPIO_PIN_PA24 (GPIO_PIOA_BASE + 24)
--#define GPIO_PIN_PA25 (GPIO_PIOA_BASE + 25)
--#define GPIO_PIN_PA26 (GPIO_PIOA_BASE + 26)
--#define GPIO_PIN_PA27 (GPIO_PIOA_BASE + 27)
--#define GPIO_PIN_PA28 (GPIO_PIOA_BASE + 28)
--#define GPIO_PIN_PA29 (GPIO_PIOA_BASE + 29)
--#define GPIO_PIN_PA30 (GPIO_PIOA_BASE + 30)
--#define GPIO_PIN_PA31 (GPIO_PIOA_BASE + 31)
--
--#define GPIO_PIOB_BASE (GPIO_PIOA_BASE + 32)
--#define GPIO_PIN_PB0 (GPIO_PIOB_BASE + 0)
--#define GPIO_PIN_PB1 (GPIO_PIOB_BASE + 1)
--#define GPIO_PIN_PB2 (GPIO_PIOB_BASE + 2)
--#define GPIO_PIN_PB3 (GPIO_PIOB_BASE + 3)
--#define GPIO_PIN_PB4 (GPIO_PIOB_BASE + 4)
--#define GPIO_PIN_PB5 (GPIO_PIOB_BASE + 5)
--#define GPIO_PIN_PB6 (GPIO_PIOB_BASE + 6)
--#define GPIO_PIN_PB7 (GPIO_PIOB_BASE + 7)
--#define GPIO_PIN_PB8 (GPIO_PIOB_BASE + 8)
--#define GPIO_PIN_PB9 (GPIO_PIOB_BASE + 9)
--#define GPIO_PIN_PB10 (GPIO_PIOB_BASE + 10)
--#define GPIO_PIN_PB11 (GPIO_PIOB_BASE + 11)
--#define GPIO_PIN_PB12 (GPIO_PIOB_BASE + 12)
--#define GPIO_PIN_PB13 (GPIO_PIOB_BASE + 13)
--#define GPIO_PIN_PB14 (GPIO_PIOB_BASE + 14)
--#define GPIO_PIN_PB15 (GPIO_PIOB_BASE + 15)
--#define GPIO_PIN_PB16 (GPIO_PIOB_BASE + 16)
--#define GPIO_PIN_PB17 (GPIO_PIOB_BASE + 17)
--#define GPIO_PIN_PB18 (GPIO_PIOB_BASE + 18)
--#define GPIO_PIN_PB19 (GPIO_PIOB_BASE + 19)
--#define GPIO_PIN_PB20 (GPIO_PIOB_BASE + 20)
--#define GPIO_PIN_PB21 (GPIO_PIOB_BASE + 21)
--#define GPIO_PIN_PB22 (GPIO_PIOB_BASE + 22)
--#define GPIO_PIN_PB23 (GPIO_PIOB_BASE + 23)
--#define GPIO_PIN_PB24 (GPIO_PIOB_BASE + 24)
--#define GPIO_PIN_PB25 (GPIO_PIOB_BASE + 25)
--#define GPIO_PIN_PB26 (GPIO_PIOB_BASE + 26)
--#define GPIO_PIN_PB27 (GPIO_PIOB_BASE + 27)
--#define GPIO_PIN_PB28 (GPIO_PIOB_BASE + 28)
--#define GPIO_PIN_PB29 (GPIO_PIOB_BASE + 29)
--#define GPIO_PIN_PB30 (GPIO_PIOB_BASE + 30)
--
--#define GPIO_PIOC_BASE (GPIO_PIOB_BASE + 32)
--#define GPIO_PIN_PC0 (GPIO_PIOC_BASE + 0)
--#define GPIO_PIN_PC1 (GPIO_PIOC_BASE + 1)
--#define GPIO_PIN_PC2 (GPIO_PIOC_BASE + 2)
--#define GPIO_PIN_PC3 (GPIO_PIOC_BASE + 3)
--#define GPIO_PIN_PC4 (GPIO_PIOC_BASE + 4)
--#define GPIO_PIN_PC5 (GPIO_PIOC_BASE + 5)
--#define GPIO_PIN_PC6 (GPIO_PIOC_BASE + 6)
--#define GPIO_PIN_PC7 (GPIO_PIOC_BASE + 7)
--#define GPIO_PIN_PC8 (GPIO_PIOC_BASE + 8)
--#define GPIO_PIN_PC9 (GPIO_PIOC_BASE + 9)
--#define GPIO_PIN_PC10 (GPIO_PIOC_BASE + 10)
--#define GPIO_PIN_PC11 (GPIO_PIOC_BASE + 11)
--#define GPIO_PIN_PC12 (GPIO_PIOC_BASE + 12)
--#define GPIO_PIN_PC13 (GPIO_PIOC_BASE + 13)
--#define GPIO_PIN_PC14 (GPIO_PIOC_BASE + 14)
--#define GPIO_PIN_PC15 (GPIO_PIOC_BASE + 15)
--#define GPIO_PIN_PC16 (GPIO_PIOC_BASE + 16)
--#define GPIO_PIN_PC17 (GPIO_PIOC_BASE + 17)
--#define GPIO_PIN_PC18 (GPIO_PIOC_BASE + 18)
--#define GPIO_PIN_PC19 (GPIO_PIOC_BASE + 19)
--#define GPIO_PIN_PC20 (GPIO_PIOC_BASE + 20)
--#define GPIO_PIN_PC21 (GPIO_PIOC_BASE + 21)
--#define GPIO_PIN_PC22 (GPIO_PIOC_BASE + 22)
--#define GPIO_PIN_PC23 (GPIO_PIOC_BASE + 23)
--#define GPIO_PIN_PC24 (GPIO_PIOC_BASE + 24)
--#define GPIO_PIN_PC25 (GPIO_PIOC_BASE + 25)
--#define GPIO_PIN_PC26 (GPIO_PIOC_BASE + 26)
--#define GPIO_PIN_PC27 (GPIO_PIOC_BASE + 27)
--#define GPIO_PIN_PC28 (GPIO_PIOC_BASE + 28)
--#define GPIO_PIN_PC29 (GPIO_PIOC_BASE + 29)
--#define GPIO_PIN_PC30 (GPIO_PIOC_BASE + 30)
--#define GPIO_PIN_PC31 (GPIO_PIOC_BASE + 31)
--
--#define GPIO_PIOD_BASE (GPIO_PIOC_BASE + 32)
--#define GPIO_PIN_PD0 (GPIO_PIOD_BASE + 0)
--#define GPIO_PIN_PD1 (GPIO_PIOD_BASE + 1)
--#define GPIO_PIN_PD2 (GPIO_PIOD_BASE + 2)
--#define GPIO_PIN_PD3 (GPIO_PIOD_BASE + 3)
--#define GPIO_PIN_PD4 (GPIO_PIOD_BASE + 4)
--#define GPIO_PIN_PD5 (GPIO_PIOD_BASE + 5)
--#define GPIO_PIN_PD6 (GPIO_PIOD_BASE + 6)
--#define GPIO_PIN_PD7 (GPIO_PIOD_BASE + 7)
--#define GPIO_PIN_PD8 (GPIO_PIOD_BASE + 8)
--#define GPIO_PIN_PD9 (GPIO_PIOD_BASE + 9)
--#define GPIO_PIN_PD10 (GPIO_PIOD_BASE + 10)
--#define GPIO_PIN_PD11 (GPIO_PIOD_BASE + 11)
--#define GPIO_PIN_PD12 (GPIO_PIOD_BASE + 12)
--#define GPIO_PIN_PD13 (GPIO_PIOD_BASE + 13)
--#define GPIO_PIN_PD14 (GPIO_PIOD_BASE + 14)
--#define GPIO_PIN_PD15 (GPIO_PIOD_BASE + 15)
--#define GPIO_PIN_PD16 (GPIO_PIOD_BASE + 16)
--#define GPIO_PIN_PD17 (GPIO_PIOD_BASE + 17)
--
--#define GPIO_PIOE_BASE (GPIO_PIOD_BASE + 32)
--#define GPIO_PIN_PE0 (GPIO_PIOE_BASE + 0)
--#define GPIO_PIN_PE1 (GPIO_PIOE_BASE + 1)
--#define GPIO_PIN_PE2 (GPIO_PIOE_BASE + 2)
--#define GPIO_PIN_PE3 (GPIO_PIOE_BASE + 3)
--#define GPIO_PIN_PE4 (GPIO_PIOE_BASE + 4)
--#define GPIO_PIN_PE5 (GPIO_PIOE_BASE + 5)
--#define GPIO_PIN_PE6 (GPIO_PIOE_BASE + 6)
--#define GPIO_PIN_PE7 (GPIO_PIOE_BASE + 7)
--#define GPIO_PIN_PE8 (GPIO_PIOE_BASE + 8)
--#define GPIO_PIN_PE9 (GPIO_PIOE_BASE + 9)
--#define GPIO_PIN_PE10 (GPIO_PIOE_BASE + 10)
--#define GPIO_PIN_PE11 (GPIO_PIOE_BASE + 11)
--#define GPIO_PIN_PE12 (GPIO_PIOE_BASE + 12)
--#define GPIO_PIN_PE13 (GPIO_PIOE_BASE + 13)
--#define GPIO_PIN_PE14 (GPIO_PIOE_BASE + 14)
--#define GPIO_PIN_PE15 (GPIO_PIOE_BASE + 15)
--#define GPIO_PIN_PE16 (GPIO_PIOE_BASE + 16)
--#define GPIO_PIN_PE17 (GPIO_PIOE_BASE + 17)
--#define GPIO_PIN_PE18 (GPIO_PIOE_BASE + 18)
--#define GPIO_PIN_PE19 (GPIO_PIOE_BASE + 19)
--#define GPIO_PIN_PE20 (GPIO_PIOE_BASE + 20)
--#define GPIO_PIN_PE21 (GPIO_PIOE_BASE + 21)
--#define GPIO_PIN_PE22 (GPIO_PIOE_BASE + 22)
--#define GPIO_PIN_PE23 (GPIO_PIOE_BASE + 23)
--#define GPIO_PIN_PE24 (GPIO_PIOE_BASE + 24)
--#define GPIO_PIN_PE25 (GPIO_PIOE_BASE + 25)
--#define GPIO_PIN_PE26 (GPIO_PIOE_BASE + 26)
--
--static inline void *gpio_pin_to_addr(unsigned int pin)
--{
-- switch (pin >> 5) {
-- case 0:
-- return (void *)PIOA_BASE;
-- case 1:
-- return (void *)PIOB_BASE;
-- case 2:
-- return (void *)PIOC_BASE;
-- case 3:
-- return (void *)PIOD_BASE;
-- case 4:
-- return (void *)PIOE_BASE;
-- default:
-- return NULL;
-- }
--}
--
--void gpio_select_periph_A(unsigned int pin, int use_pullup);
--void gpio_select_periph_B(unsigned int pin, int use_pullup);
--
--void gpio_enable_ebi(void);
--void gpio_enable_usart0(void);
--void gpio_enable_usart1(void);
--void gpio_enable_usart2(void);
--void gpio_enable_usart3(void);
--void gpio_enable_macb0(void);
--void gpio_enable_macb1(void);
--void gpio_enable_mmci(void);
--
--#endif /* __ASM_AVR32_ARCH_GPIO_H__ */
-diff --git a/include/asm-avr32/arch-at32ap7000/hmatrix2.h b/include/asm-avr32/arch-at32ap7000/hmatrix2.h
-deleted file mode 100644
-index b0e787a..0000000
---- a/include/asm-avr32/arch-at32ap7000/hmatrix2.h
-+++ /dev/null
-@@ -1,232 +0,0 @@
--/*
-- * Register definition for the High-speed Bus Matrix
-- */
--#ifndef __ASM_AVR32_HMATRIX2_H__
--#define __ASM_AVR32_HMATRIX2_H__
--
--/* HMATRIX2 register offsets */
--#define HMATRIX2_MCFG0 0x0000
--#define HMATRIX2_MCFG1 0x0004
--#define HMATRIX2_MCFG2 0x0008
--#define HMATRIX2_MCFG3 0x000c
--#define HMATRIX2_MCFG4 0x0010
--#define HMATRIX2_MCFG5 0x0014
--#define HMATRIX2_MCFG6 0x0018
--#define HMATRIX2_MCFG7 0x001c
--#define HMATRIX2_MCFG8 0x0020
--#define HMATRIX2_MCFG9 0x0024
--#define HMATRIX2_MCFG10 0x0028
--#define HMATRIX2_MCFG11 0x002c
--#define HMATRIX2_MCFG12 0x0030
--#define HMATRIX2_MCFG13 0x0034
--#define HMATRIX2_MCFG14 0x0038
--#define HMATRIX2_MCFG15 0x003c
--#define HMATRIX2_SCFG0 0x0040
--#define HMATRIX2_SCFG1 0x0044
--#define HMATRIX2_SCFG2 0x0048
--#define HMATRIX2_SCFG3 0x004c
--#define HMATRIX2_SCFG4 0x0050
--#define HMATRIX2_SCFG5 0x0054
--#define HMATRIX2_SCFG6 0x0058
--#define HMATRIX2_SCFG7 0x005c
--#define HMATRIX2_SCFG8 0x0060
--#define HMATRIX2_SCFG9 0x0064
--#define HMATRIX2_SCFG10 0x0068
--#define HMATRIX2_SCFG11 0x006c
--#define HMATRIX2_SCFG12 0x0070
--#define HMATRIX2_SCFG13 0x0074
--#define HMATRIX2_SCFG14 0x0078
--#define HMATRIX2_SCFG15 0x007c
--#define HMATRIX2_PRAS0 0x0080
--#define HMATRIX2_PRBS0 0x0084
--#define HMATRIX2_PRAS1 0x0088
--#define HMATRIX2_PRBS1 0x008c
--#define HMATRIX2_PRAS2 0x0090
--#define HMATRIX2_PRBS2 0x0094
--#define HMATRIX2_PRAS3 0x0098
--#define HMATRIX2_PRBS3 0x009c
--#define HMATRIX2_PRAS4 0x00a0
--#define HMATRIX2_PRBS4 0x00a4
--#define HMATRIX2_PRAS5 0x00a8
--#define HMATRIX2_PRBS5 0x00ac
--#define HMATRIX2_PRAS6 0x00b0
--#define HMATRIX2_PRBS6 0x00b4
--#define HMATRIX2_PRAS7 0x00b8
--#define HMATRIX2_PRBS7 0x00bc
--#define HMATRIX2_PRAS8 0x00c0
--#define HMATRIX2_PRBS8 0x00c4
--#define HMATRIX2_PRAS9 0x00c8
--#define HMATRIX2_PRBS9 0x00cc
--#define HMATRIX2_PRAS10 0x00d0
--#define HMATRIX2_PRBS10 0x00d4
--#define HMATRIX2_PRAS11 0x00d8
--#define HMATRIX2_PRBS11 0x00dc
--#define HMATRIX2_PRAS12 0x00e0
--#define HMATRIX2_PRBS12 0x00e4
--#define HMATRIX2_PRAS13 0x00e8
--#define HMATRIX2_PRBS13 0x00ec
--#define HMATRIX2_PRAS14 0x00f0
--#define HMATRIX2_PRBS14 0x00f4
--#define HMATRIX2_PRAS15 0x00f8
--#define HMATRIX2_PRBS15 0x00fc
--#define HMATRIX2_MRCR 0x0100
--#define HMATRIX2_SFR0 0x0110
--#define HMATRIX2_SFR1 0x0114
--#define HMATRIX2_SFR2 0x0118
--#define HMATRIX2_SFR3 0x011c
--#define HMATRIX2_SFR4 0x0120
--#define HMATRIX2_SFR5 0x0124
--#define HMATRIX2_SFR6 0x0128
--#define HMATRIX2_SFR7 0x012c
--#define HMATRIX2_SFR8 0x0130
--#define HMATRIX2_SFR9 0x0134
--#define HMATRIX2_SFR10 0x0138
--#define HMATRIX2_SFR11 0x013c
--#define HMATRIX2_SFR12 0x0140
--#define HMATRIX2_SFR13 0x0144
--#define HMATRIX2_SFR14 0x0148
--#define HMATRIX2_SFR15 0x014c
--#define HMATRIX2_VERSION 0x01fc
--
--/* Bitfields in MCFG0 */
--#define HMATRIX2_ULBT_OFFSET 0
--#define HMATRIX2_ULBT_SIZE 3
--
--/* Bitfields in SCFG0 */
--#define HMATRIX2_SLOT_CYCLE_OFFSET 0
--#define HMATRIX2_SLOT_CYCLE_SIZE 8
--#define HMATRIX2_DEFMSTR_TYPE_OFFSET 16
--#define HMATRIX2_DEFMSTR_TYPE_SIZE 2
--#define HMATRIX2_FIXED_DEFMSTR_OFFSET 18
--#define HMATRIX2_FIXED_DEFMSTR_SIZE 4
--#define HMATRIX2_ARBT_OFFSET 24
--#define HMATRIX2_ARBT_SIZE 2
--
--/* Bitfields in PRAS0 */
--#define HMATRIX2_M0PR_OFFSET 0
--#define HMATRIX2_M0PR_SIZE 4
--#define HMATRIX2_M1PR_OFFSET 4
--#define HMATRIX2_M1PR_SIZE 4
--#define HMATRIX2_M2PR_OFFSET 8
--#define HMATRIX2_M2PR_SIZE 4
--#define HMATRIX2_M3PR_OFFSET 12
--#define HMATRIX2_M3PR_SIZE 4
--#define HMATRIX2_M4PR_OFFSET 16
--#define HMATRIX2_M4PR_SIZE 4
--#define HMATRIX2_M5PR_OFFSET 20
--#define HMATRIX2_M5PR_SIZE 4
--#define HMATRIX2_M6PR_OFFSET 24
--#define HMATRIX2_M6PR_SIZE 4
--#define HMATRIX2_M7PR_OFFSET 28
--#define HMATRIX2_M7PR_SIZE 4
--
--/* Bitfields in PRBS0 */
--#define HMATRIX2_M8PR_OFFSET 0
--#define HMATRIX2_M8PR_SIZE 4
--#define HMATRIX2_M9PR_OFFSET 4
--#define HMATRIX2_M9PR_SIZE 4
--#define HMATRIX2_M10PR_OFFSET 8
--#define HMATRIX2_M10PR_SIZE 4
--#define HMATRIX2_M11PR_OFFSET 12
--#define HMATRIX2_M11PR_SIZE 4
--#define HMATRIX2_M12PR_OFFSET 16
--#define HMATRIX2_M12PR_SIZE 4
--#define HMATRIX2_M13PR_OFFSET 20
--#define HMATRIX2_M13PR_SIZE 4
--#define HMATRIX2_M14PR_OFFSET 24
--#define HMATRIX2_M14PR_SIZE 4
--#define HMATRIX2_M15PR_OFFSET 28
--#define HMATRIX2_M15PR_SIZE 4
--
--/* Bitfields in MRCR */
--#define HMATRIX2_RBC0_OFFSET 0
--#define HMATRIX2_RBC0_SIZE 1
--#define HMATRIX2_RBC1_OFFSET 1
--#define HMATRIX2_RBC1_SIZE 1
--#define HMATRIX2_RBC2_OFFSET 2
--#define HMATRIX2_RBC2_SIZE 1
--#define HMATRIX2_RBC3_OFFSET 3
--#define HMATRIX2_RBC3_SIZE 1
--#define HMATRIX2_RBC4_OFFSET 4
--#define HMATRIX2_RBC4_SIZE 1
--#define HMATRIX2_RBC5_OFFSET 5
--#define HMATRIX2_RBC5_SIZE 1
--#define HMATRIX2_RBC6_OFFSET 6
--#define HMATRIX2_RBC6_SIZE 1
--#define HMATRIX2_RBC7_OFFSET 7
--#define HMATRIX2_RBC7_SIZE 1
--#define HMATRIX2_RBC8_OFFSET 8
--#define HMATRIX2_RBC8_SIZE 1
--#define HMATRIX2_RBC9_OFFSET 9
--#define HMATRIX2_RBC9_SIZE 1
--#define HMATRIX2_RBC10_OFFSET 10
--#define HMATRIX2_RBC10_SIZE 1
--#define HMATRIX2_RBC11_OFFSET 11
--#define HMATRIX2_RBC11_SIZE 1
--#define HMATRIX2_RBC12_OFFSET 12
--#define HMATRIX2_RBC12_SIZE 1
--#define HMATRIX2_RBC13_OFFSET 13
--#define HMATRIX2_RBC13_SIZE 1
--#define HMATRIX2_RBC14_OFFSET 14
--#define HMATRIX2_RBC14_SIZE 1
--#define HMATRIX2_RBC15_OFFSET 15
--#define HMATRIX2_RBC15_SIZE 1
--
--/* Bitfields in SFR0 */
--#define HMATRIX2_SFR_OFFSET 0
--#define HMATRIX2_SFR_SIZE 32
--
--/* Bitfields in SFR4 */
--#define HMATRIX2_CS1A_OFFSET 1
--#define HMATRIX2_CS1A_SIZE 1
--#define HMATRIX2_CS3A_OFFSET 3
--#define HMATRIX2_CS3A_SIZE 1
--#define HMATRIX2_CS4A_OFFSET 4
--#define HMATRIX2_CS4A_SIZE 1
--#define HMATRIX2_CS5A_OFFSET 5
--#define HMATRIX2_CS5A_SIZE 1
--#define HMATRIX2_DBPUC_OFFSET 8
--#define HMATRIX2_DBPUC_SIZE 1
--
--/* Bitfields in VERSION */
--#define HMATRIX2_VERSION_OFFSET 0
--#define HMATRIX2_VERSION_SIZE 12
--#define HMATRIX2_MFN_OFFSET 16
--#define HMATRIX2_MFN_SIZE 3
--
--/* Constants for ULBT */
--#define HMATRIX2_ULBT_INFINITE 0
--#define HMATRIX2_ULBT_SINGLE 1
--#define HMATRIX2_ULBT_FOUR_BEAT 2
--#define HMATRIX2_ULBT_SIXTEEN_BEAT 4
--
--/* Constants for DEFMSTR_TYPE */
--#define HMATRIX2_DEFMSTR_TYPE_NO_DEFAULT 0
--#define HMATRIX2_DEFMSTR_TYPE_LAST_DEFAULT 1
--#define HMATRIX2_DEFMSTR_TYPE_FIXED_DEFAULT 2
--
--/* Constants for ARBT */
--#define HMATRIX2_ARBT_ROUND_ROBIN 0
--#define HMATRIX2_ARBT_FIXED_PRIORITY 1
--
--/* Bit manipulation macros */
--#define HMATRIX2_BIT(name) \
-- (1 << HMATRIX2_##name##_OFFSET)
--#define HMATRIX2_BF(name,value) \
-- (((value) & ((1 << HMATRIX2_##name##_SIZE) - 1)) \
-- << HMATRIX2_##name##_OFFSET)
--#define HMATRIX2_BFEXT(name,value) \
-- (((value) >> HMATRIX2_##name##_OFFSET) \
-- & ((1 << HMATRIX2_##name##_SIZE) - 1))
--#define HMATRIX2_BFINS(name,value,old) \
-- (((old) & ~(((1 << HMATRIX2_##name##_SIZE) - 1) \
-- << HMATRIX2_##name##_OFFSET)) \
-- | HMATRIX2_BF(name,value))
--
--/* Register access macros */
--#define hmatrix2_readl(reg) \
-- readl((void *)HMATRIX_BASE + HMATRIX2_##reg)
--#define hmatrix2_writel(reg,value) \
-- writel((value), (void *)HMATRIX_BASE + HMATRIX2_##reg)
--
--#endif /* __ASM_AVR32_HMATRIX2_H__ */
-diff --git a/include/asm-avr32/arch-at32ap7000/memory-map.h b/include/asm-avr32/arch-at32ap7000/memory-map.h
-deleted file mode 100644
-index 5513e88..0000000
---- a/include/asm-avr32/arch-at32ap7000/memory-map.h
-+++ /dev/null
-@@ -1,66 +0,0 @@
--/*
-- * Copyright (C) 2005-2006 Atmel Corporation
-- *
-- * See file CREDITS for list of people who contributed to this
-- * project.
-- *
-- * This program is free software; you can redistribute it and/or
-- * modify it under the terms of the GNU General Public License as
-- * published by the Free Software Foundation; either version 2 of
-- * the License, or (at your option) any later version.
-- *
-- * This program is distributed in the hope that it will be useful,
-- * but WITHOUT ANY WARRANTY; without even the implied warranty of
-- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-- * GNU General Public License for more details.
-- *
-- * You should have received a copy of the GNU General Public License
-- * along with this program; if not, write to the Free Software
-- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
-- * MA 02111-1307 USA
-- */
--#ifndef __AT32AP7000_MEMORY_MAP_H__
--#define __AT32AP7000_MEMORY_MAP_H__
--
--/* Devices on the High Speed Bus (HSB) */
--#define LCDC_BASE 0xFF000000
--#define DMAC_BASE 0xFF200000
--#define USB_FIFO 0xFF300000
--
--/* Devices on Peripheral Bus A (PBA) */
--#define SPI0_BASE 0xFFE00000
--#define SPI1_BASE 0xFFE00400
--#define TWI_BASE 0xFFE00800
--#define USART0_BASE 0xFFE00C00
--#define USART1_BASE 0xFFE01000
--#define USART2_BASE 0xFFE01400
--#define USART3_BASE 0xFFE01800
--#define SSC0_BASE 0xFFE01C00
--#define SSC1_BASE 0xFFE02000
--#define SSC2_BASE 0xFFE02400
--#define PIOA_BASE 0xFFE02800
--#define PIOB_BASE 0xFFE02C00
--#define PIOC_BASE 0xFFE03000
--#define PIOD_BASE 0xFFE03400
--#define PIOE_BASE 0xFFE03800
--#define PSIF_BASE 0xFFE03C00
--
--/* Devices on Peripheral Bus B (PBB) */
--#define SM_BASE 0xFFF00000
--#define INTC_BASE 0xFFF00400
--#define HMATRIX_BASE 0xFFF00800
--#define TIMER0_BASE 0xFFF00C00
--#define TIMER1_BASE 0xFFF01000
--#define PWM_BASE 0xFFF01400
--#define MACB0_BASE 0xFFF01800
--#define MACB1_BASE 0xFFF01C00
--#define DAC_BASE 0xFFF02000
--#define MMCI_BASE 0xFFF02400
--#define AUDIOC_BASE 0xFFF02800
--#define HISI_BASE 0xFFF02C00
--#define USB_BASE 0xFFF03000
--#define HSMC_BASE 0xFFF03400
--#define HSDRAMC_BASE 0xFFF03800
--#define ECC_BASE 0xFFF03C00
--
--#endif /* __AT32AP7000_MEMORY_MAP_H__ */
-diff --git a/include/asm-avr32/arch-at32ap7000/mmc.h b/include/asm-avr32/arch-at32ap7000/mmc.h
-deleted file mode 100644
-index fcfbbb3..0000000
---- a/include/asm-avr32/arch-at32ap7000/mmc.h
-+++ /dev/null
-@@ -1,96 +0,0 @@
--/*
-- * Copyright (C) 2004-2006 Atmel Corporation
-- *
-- * See file CREDITS for list of people who contributed to this
-- * project.
-- *
-- * This program is free software; you can redistribute it and/or
-- * modify it under the terms of the GNU General Public License as
-- * published by the Free Software Foundation; either version 2 of
-- * the License, or (at your option) any later version.
-- *
-- * This program is distributed in the hope that it will be useful,
-- * but WITHOUT ANY WARRANTY; without even the implied warranty of
-- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-- * GNU General Public License for more details.
-- *
-- * You should have received a copy of the GNU General Public License
-- * along with this program; if not, write to the Free Software
-- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
-- * MA 02111-1307 USA
-- */
--#ifndef __ASM_AVR32_MMC_H
--#define __ASM_AVR32_MMC_H
--
--struct mmc_cid {
-- unsigned long psn;
-- unsigned short oid;
-- unsigned char mid;
-- unsigned char prv;
-- unsigned char mdt;
-- char pnm[7];
--};
--
--struct mmc_csd
--{
-- u8 csd_structure:2,
-- spec_vers:4,
-- rsvd1:2;
-- u8 taac;
-- u8 nsac;
-- u8 tran_speed;
-- u16 ccc:12,
-- read_bl_len:4;
-- u64 read_bl_partial:1,
-- write_blk_misalign:1,
-- read_blk_misalign:1,
-- dsr_imp:1,
-- rsvd2:2,
-- c_size:12,
-- vdd_r_curr_min:3,
-- vdd_r_curr_max:3,
-- vdd_w_curr_min:3,
-- vdd_w_curr_max:3,
-- c_size_mult:3,
-- sector_size:5,
-- erase_grp_size:5,
-- wp_grp_size:5,
-- wp_grp_enable:1,
-- default_ecc:2,
-- r2w_factor:3,
-- write_bl_len:4,
-- write_bl_partial:1,
-- rsvd3:5;
-- u8 file_format_grp:1,
-- copy:1,
-- perm_write_protect:1,
-- tmp_write_protect:1,
-- file_format:2,
-- ecc:2;
-- u8 crc:7;
-- u8 one:1;
--};
--
--/* MMC Command numbers */
--#define MMC_CMD_GO_IDLE_STATE 0
--#define MMC_CMD_SEND_OP_COND 1
--#define MMC_CMD_ALL_SEND_CID 2
--#define MMC_CMD_SET_RELATIVE_ADDR 3
--#define MMC_CMD_SD_SEND_RELATIVE_ADDR 3
--#define MMC_CMD_SET_DSR 4
--#define MMC_CMD_SELECT_CARD 7
--#define MMC_CMD_SEND_CSD 9
--#define MMC_CMD_SEND_CID 10
--#define MMC_CMD_SEND_STATUS 13
--#define MMC_CMD_SET_BLOCKLEN 16
--#define MMC_CMD_READ_SINGLE_BLOCK 17
--#define MMC_CMD_READ_MULTIPLE_BLOCK 18
--#define MMC_CMD_WRITE_BLOCK 24
--#define MMC_CMD_APP_CMD 55
--
--#define MMC_ACMD_SD_SEND_OP_COND 41
--
--#define R1_ILLEGAL_COMMAND (1 << 22)
--#define R1_APP_CMD (1 << 5)
--
--#endif /* __ASM_AVR32_MMC_H */
-diff --git a/include/asm-avr32/arch-at32ap700x/chip-features.h b/include/asm-avr32/arch-at32ap700x/chip-features.h
-new file mode 100644
-index 0000000..29b1fd6
---- /dev/null
-+++ b/include/asm-avr32/arch-at32ap700x/chip-features.h
-@@ -0,0 +1,34 @@
-+/*
-+ * Copyright (C) 2007 Atmel Corporation
-+ *
-+ * See file CREDITS for list of people who contributed to this
-+ * project.
-+ *
-+ * This program is free software; you can redistribute it and/or
-+ * modify it under the terms of the GNU General Public License as
-+ * published by the Free Software Foundation; either version 2 of
-+ * the License, or (at your option) any later version.
-+ *
-+ * This program is distributed in the hope that it will be useful,
-+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
-+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-+ * GNU General Public License for more details.
-+ *
-+ * You should have received a copy of the GNU General Public License
-+ * along with this program; if not, write to the Free Software
-+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
-+ * MA 02111-1307 USA
-+ */
-+#ifndef __ASM_AVR32_ARCH_CHIP_FEATURES_H__
-+#define __ASM_AVR32_ARCH_CHIP_FEATURES_H__
-+
-+/* Currently, all the AP700x chips have these */
-+#define AT32AP700x_CHIP_HAS_USART
-+#define AT32AP700x_CHIP_HAS_MMCI
-+
-+/* Only AP7000 has ethernet interface */
-+#ifdef CONFIG_AT32AP7000
-+#define AT32AP700x_CHIP_HAS_MACB
-+#endif
-+
-+#endif /* __ASM_AVR32_ARCH_CHIP_FEATURES_H__ */
-diff --git a/include/asm-avr32/arch-at32ap700x/clk.h b/include/asm-avr32/arch-at32ap700x/clk.h
-new file mode 100644
-index 0000000..ea84c08
---- /dev/null
-+++ b/include/asm-avr32/arch-at32ap700x/clk.h
-@@ -0,0 +1,78 @@
-+/*
-+ * Copyright (C) 2006 Atmel Corporation
-+ *
-+ * See file CREDITS for list of people who contributed to this
-+ * project.
-+ *
-+ * This program is free software; you can redistribute it and/or
-+ * modify it under the terms of the GNU General Public License as
-+ * published by the Free Software Foundation; either version 2 of
-+ * the License, or (at your option) any later version.
-+ *
-+ * This program is distributed in the hope that it will be useful,
-+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
-+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-+ * GNU General Public License for more details.
-+ *
-+ * You should have received a copy of the GNU General Public License
-+ * along with this program; if not, write to the Free Software
-+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
-+ * MA 02111-1307 USA
-+ */
-+#ifndef __ASM_AVR32_ARCH_CLK_H__
-+#define __ASM_AVR32_ARCH_CLK_H__
-+
-+#include <asm/arch/chip-features.h>
-+
-+#ifdef CONFIG_PLL
-+#define MAIN_CLK_RATE ((CFG_OSC0_HZ / CFG_PLL0_DIV) * CFG_PLL0_MUL)
-+#else
-+#define MAIN_CLK_RATE (CFG_OSC0_HZ)
-+#endif
-+
-+static inline unsigned long get_cpu_clk_rate(void)
-+{
-+ return MAIN_CLK_RATE >> CFG_CLKDIV_CPU;
-+}
-+static inline unsigned long get_hsb_clk_rate(void)
-+{
-+ return MAIN_CLK_RATE >> CFG_CLKDIV_HSB;
-+}
-+static inline unsigned long get_pba_clk_rate(void)
-+{
-+ return MAIN_CLK_RATE >> CFG_CLKDIV_PBA;
-+}
-+static inline unsigned long get_pbb_clk_rate(void)
-+{
-+ return MAIN_CLK_RATE >> CFG_CLKDIV_PBB;
-+}
-+
-+/* Accessors for specific devices. More will be added as needed. */
-+static inline unsigned long get_sdram_clk_rate(void)
-+{
-+ return get_hsb_clk_rate();
-+}
-+#ifdef AT32AP700x_CHIP_HAS_USART
-+static inline unsigned long get_usart_clk_rate(unsigned int dev_id)
-+{
-+ return get_pba_clk_rate();
-+}
-+#endif
-+#ifdef AT32AP700x_CHIP_HAS_USART
-+static inline unsigned long get_macb_pclk_rate(unsigned int dev_id)
-+{
-+ return get_pbb_clk_rate();
-+}
-+static inline unsigned long get_macb_hclk_rate(unsigned int dev_id)
-+{
-+ return get_hsb_clk_rate();
-+}
-+#endif
-+#ifdef AT32AP700x_CHIP_HAS_MMCI
-+static inline unsigned long get_mci_clk_rate(void)
-+{
-+ return get_pbb_clk_rate();
-+}
-+#endif
-+
-+#endif /* __ASM_AVR32_ARCH_CLK_H__ */
-diff --git a/include/asm-avr32/arch-at32ap700x/gpio.h b/include/asm-avr32/arch-at32ap700x/gpio.h
-new file mode 100644
-index 0000000..b10a3e4
---- /dev/null
-+++ b/include/asm-avr32/arch-at32ap700x/gpio.h
-@@ -0,0 +1,220 @@
-+/*
-+ * Copyright (C) 2006 Atmel Corporation
-+ *
-+ * See file CREDITS for list of people who contributed to this
-+ * project.
-+ *
-+ * This program is free software; you can redistribute it and/or
-+ * modify it under the terms of the GNU General Public License as
-+ * published by the Free Software Foundation; either version 2 of
-+ * the License, or (at your option) any later version.
-+ *
-+ * This program is distributed in the hope that it will be useful,
-+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
-+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-+ * GNU General Public License for more details.
-+ *
-+ * You should have received a copy of the GNU General Public License
-+ * along with this program; if not, write to the Free Software
-+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
-+ * MA 02111-1307 USA
-+ */
-+#ifndef __ASM_AVR32_ARCH_GPIO_H__
-+#define __ASM_AVR32_ARCH_GPIO_H__
-+
-+#include <asm/arch/chip-features.h>
-+#include <asm/arch/memory-map.h>
-+
-+#define NR_GPIO_CONTROLLERS 5
-+
-+/*
-+ * Pin numbers identifying specific GPIO pins on the chip.
-+ */
-+#define GPIO_PIOA_BASE (0)
-+#define GPIO_PIN_PA0 (GPIO_PIOA_BASE + 0)
-+#define GPIO_PIN_PA1 (GPIO_PIOA_BASE + 1)
-+#define GPIO_PIN_PA2 (GPIO_PIOA_BASE + 2)
-+#define GPIO_PIN_PA3 (GPIO_PIOA_BASE + 3)
-+#define GPIO_PIN_PA4 (GPIO_PIOA_BASE + 4)
-+#define GPIO_PIN_PA5 (GPIO_PIOA_BASE + 5)
-+#define GPIO_PIN_PA6 (GPIO_PIOA_BASE + 6)
-+#define GPIO_PIN_PA7 (GPIO_PIOA_BASE + 7)
-+#define GPIO_PIN_PA8 (GPIO_PIOA_BASE + 8)
-+#define GPIO_PIN_PA9 (GPIO_PIOA_BASE + 9)
-+#define GPIO_PIN_PA10 (GPIO_PIOA_BASE + 10)
-+#define GPIO_PIN_PA11 (GPIO_PIOA_BASE + 11)
-+#define GPIO_PIN_PA12 (GPIO_PIOA_BASE + 12)
-+#define GPIO_PIN_PA13 (GPIO_PIOA_BASE + 13)
-+#define GPIO_PIN_PA14 (GPIO_PIOA_BASE + 14)
-+#define GPIO_PIN_PA15 (GPIO_PIOA_BASE + 15)
-+#define GPIO_PIN_PA16 (GPIO_PIOA_BASE + 16)
-+#define GPIO_PIN_PA17 (GPIO_PIOA_BASE + 17)
-+#define GPIO_PIN_PA18 (GPIO_PIOA_BASE + 18)
-+#define GPIO_PIN_PA19 (GPIO_PIOA_BASE + 19)
-+#define GPIO_PIN_PA20 (GPIO_PIOA_BASE + 20)
-+#define GPIO_PIN_PA21 (GPIO_PIOA_BASE + 21)
-+#define GPIO_PIN_PA22 (GPIO_PIOA_BASE + 22)
-+#define GPIO_PIN_PA23 (GPIO_PIOA_BASE + 23)
-+#define GPIO_PIN_PA24 (GPIO_PIOA_BASE + 24)
-+#define GPIO_PIN_PA25 (GPIO_PIOA_BASE + 25)
-+#define GPIO_PIN_PA26 (GPIO_PIOA_BASE + 26)
-+#define GPIO_PIN_PA27 (GPIO_PIOA_BASE + 27)
-+#define GPIO_PIN_PA28 (GPIO_PIOA_BASE + 28)
-+#define GPIO_PIN_PA29 (GPIO_PIOA_BASE + 29)
-+#define GPIO_PIN_PA30 (GPIO_PIOA_BASE + 30)
-+#define GPIO_PIN_PA31 (GPIO_PIOA_BASE + 31)
-+
-+#define GPIO_PIOB_BASE (GPIO_PIOA_BASE + 32)
-+#define GPIO_PIN_PB0 (GPIO_PIOB_BASE + 0)
-+#define GPIO_PIN_PB1 (GPIO_PIOB_BASE + 1)
-+#define GPIO_PIN_PB2 (GPIO_PIOB_BASE + 2)
-+#define GPIO_PIN_PB3 (GPIO_PIOB_BASE + 3)
-+#define GPIO_PIN_PB4 (GPIO_PIOB_BASE + 4)
-+#define GPIO_PIN_PB5 (GPIO_PIOB_BASE + 5)
-+#define GPIO_PIN_PB6 (GPIO_PIOB_BASE + 6)
-+#define GPIO_PIN_PB7 (GPIO_PIOB_BASE + 7)
-+#define GPIO_PIN_PB8 (GPIO_PIOB_BASE + 8)
-+#define GPIO_PIN_PB9 (GPIO_PIOB_BASE + 9)
-+#define GPIO_PIN_PB10 (GPIO_PIOB_BASE + 10)
-+#define GPIO_PIN_PB11 (GPIO_PIOB_BASE + 11)
-+#define GPIO_PIN_PB12 (GPIO_PIOB_BASE + 12)
-+#define GPIO_PIN_PB13 (GPIO_PIOB_BASE + 13)
-+#define GPIO_PIN_PB14 (GPIO_PIOB_BASE + 14)
-+#define GPIO_PIN_PB15 (GPIO_PIOB_BASE + 15)
-+#define GPIO_PIN_PB16 (GPIO_PIOB_BASE + 16)
-+#define GPIO_PIN_PB17 (GPIO_PIOB_BASE + 17)
-+#define GPIO_PIN_PB18 (GPIO_PIOB_BASE + 18)
-+#define GPIO_PIN_PB19 (GPIO_PIOB_BASE + 19)
-+#define GPIO_PIN_PB20 (GPIO_PIOB_BASE + 20)
-+#define GPIO_PIN_PB21 (GPIO_PIOB_BASE + 21)
-+#define GPIO_PIN_PB22 (GPIO_PIOB_BASE + 22)
-+#define GPIO_PIN_PB23 (GPIO_PIOB_BASE + 23)
-+#define GPIO_PIN_PB24 (GPIO_PIOB_BASE + 24)
-+#define GPIO_PIN_PB25 (GPIO_PIOB_BASE + 25)
-+#define GPIO_PIN_PB26 (GPIO_PIOB_BASE + 26)
-+#define GPIO_PIN_PB27 (GPIO_PIOB_BASE + 27)
-+#define GPIO_PIN_PB28 (GPIO_PIOB_BASE + 28)
-+#define GPIO_PIN_PB29 (GPIO_PIOB_BASE + 29)
-+#define GPIO_PIN_PB30 (GPIO_PIOB_BASE + 30)
-+
-+#define GPIO_PIOC_BASE (GPIO_PIOB_BASE + 32)
-+#define GPIO_PIN_PC0 (GPIO_PIOC_BASE + 0)
-+#define GPIO_PIN_PC1 (GPIO_PIOC_BASE + 1)
-+#define GPIO_PIN_PC2 (GPIO_PIOC_BASE + 2)
-+#define GPIO_PIN_PC3 (GPIO_PIOC_BASE + 3)
-+#define GPIO_PIN_PC4 (GPIO_PIOC_BASE + 4)
-+#define GPIO_PIN_PC5 (GPIO_PIOC_BASE + 5)
-+#define GPIO_PIN_PC6 (GPIO_PIOC_BASE + 6)
-+#define GPIO_PIN_PC7 (GPIO_PIOC_BASE + 7)
-+#define GPIO_PIN_PC8 (GPIO_PIOC_BASE + 8)
-+#define GPIO_PIN_PC9 (GPIO_PIOC_BASE + 9)
-+#define GPIO_PIN_PC10 (GPIO_PIOC_BASE + 10)
-+#define GPIO_PIN_PC11 (GPIO_PIOC_BASE + 11)
-+#define GPIO_PIN_PC12 (GPIO_PIOC_BASE + 12)
-+#define GPIO_PIN_PC13 (GPIO_PIOC_BASE + 13)
-+#define GPIO_PIN_PC14 (GPIO_PIOC_BASE + 14)
-+#define GPIO_PIN_PC15 (GPIO_PIOC_BASE + 15)
-+#define GPIO_PIN_PC16 (GPIO_PIOC_BASE + 16)
-+#define GPIO_PIN_PC17 (GPIO_PIOC_BASE + 17)
-+#define GPIO_PIN_PC18 (GPIO_PIOC_BASE + 18)
-+#define GPIO_PIN_PC19 (GPIO_PIOC_BASE + 19)
-+#define GPIO_PIN_PC20 (GPIO_PIOC_BASE + 20)
-+#define GPIO_PIN_PC21 (GPIO_PIOC_BASE + 21)
-+#define GPIO_PIN_PC22 (GPIO_PIOC_BASE + 22)
-+#define GPIO_PIN_PC23 (GPIO_PIOC_BASE + 23)
-+#define GPIO_PIN_PC24 (GPIO_PIOC_BASE + 24)
-+#define GPIO_PIN_PC25 (GPIO_PIOC_BASE + 25)
-+#define GPIO_PIN_PC26 (GPIO_PIOC_BASE + 26)
-+#define GPIO_PIN_PC27 (GPIO_PIOC_BASE + 27)
-+#define GPIO_PIN_PC28 (GPIO_PIOC_BASE + 28)
-+#define GPIO_PIN_PC29 (GPIO_PIOC_BASE + 29)
-+#define GPIO_PIN_PC30 (GPIO_PIOC_BASE + 30)
-+#define GPIO_PIN_PC31 (GPIO_PIOC_BASE + 31)
-+
-+#define GPIO_PIOD_BASE (GPIO_PIOC_BASE + 32)
-+#define GPIO_PIN_PD0 (GPIO_PIOD_BASE + 0)
-+#define GPIO_PIN_PD1 (GPIO_PIOD_BASE + 1)
-+#define GPIO_PIN_PD2 (GPIO_PIOD_BASE + 2)
-+#define GPIO_PIN_PD3 (GPIO_PIOD_BASE + 3)
-+#define GPIO_PIN_PD4 (GPIO_PIOD_BASE + 4)
-+#define GPIO_PIN_PD5 (GPIO_PIOD_BASE + 5)
-+#define GPIO_PIN_PD6 (GPIO_PIOD_BASE + 6)
-+#define GPIO_PIN_PD7 (GPIO_PIOD_BASE + 7)
-+#define GPIO_PIN_PD8 (GPIO_PIOD_BASE + 8)
-+#define GPIO_PIN_PD9 (GPIO_PIOD_BASE + 9)
-+#define GPIO_PIN_PD10 (GPIO_PIOD_BASE + 10)
-+#define GPIO_PIN_PD11 (GPIO_PIOD_BASE + 11)
-+#define GPIO_PIN_PD12 (GPIO_PIOD_BASE + 12)
-+#define GPIO_PIN_PD13 (GPIO_PIOD_BASE + 13)
-+#define GPIO_PIN_PD14 (GPIO_PIOD_BASE + 14)
-+#define GPIO_PIN_PD15 (GPIO_PIOD_BASE + 15)
-+#define GPIO_PIN_PD16 (GPIO_PIOD_BASE + 16)
-+#define GPIO_PIN_PD17 (GPIO_PIOD_BASE + 17)
-+
-+#define GPIO_PIOE_BASE (GPIO_PIOD_BASE + 32)
-+#define GPIO_PIN_PE0 (GPIO_PIOE_BASE + 0)
-+#define GPIO_PIN_PE1 (GPIO_PIOE_BASE + 1)
-+#define GPIO_PIN_PE2 (GPIO_PIOE_BASE + 2)
-+#define GPIO_PIN_PE3 (GPIO_PIOE_BASE + 3)
-+#define GPIO_PIN_PE4 (GPIO_PIOE_BASE + 4)
-+#define GPIO_PIN_PE5 (GPIO_PIOE_BASE + 5)
-+#define GPIO_PIN_PE6 (GPIO_PIOE_BASE + 6)
-+#define GPIO_PIN_PE7 (GPIO_PIOE_BASE + 7)
-+#define GPIO_PIN_PE8 (GPIO_PIOE_BASE + 8)
-+#define GPIO_PIN_PE9 (GPIO_PIOE_BASE + 9)
-+#define GPIO_PIN_PE10 (GPIO_PIOE_BASE + 10)
-+#define GPIO_PIN_PE11 (GPIO_PIOE_BASE + 11)
-+#define GPIO_PIN_PE12 (GPIO_PIOE_BASE + 12)
-+#define GPIO_PIN_PE13 (GPIO_PIOE_BASE + 13)
-+#define GPIO_PIN_PE14 (GPIO_PIOE_BASE + 14)
-+#define GPIO_PIN_PE15 (GPIO_PIOE_BASE + 15)
-+#define GPIO_PIN_PE16 (GPIO_PIOE_BASE + 16)
-+#define GPIO_PIN_PE17 (GPIO_PIOE_BASE + 17)
-+#define GPIO_PIN_PE18 (GPIO_PIOE_BASE + 18)
-+#define GPIO_PIN_PE19 (GPIO_PIOE_BASE + 19)
-+#define GPIO_PIN_PE20 (GPIO_PIOE_BASE + 20)
-+#define GPIO_PIN_PE21 (GPIO_PIOE_BASE + 21)
-+#define GPIO_PIN_PE22 (GPIO_PIOE_BASE + 22)
-+#define GPIO_PIN_PE23 (GPIO_PIOE_BASE + 23)
-+#define GPIO_PIN_PE24 (GPIO_PIOE_BASE + 24)
-+#define GPIO_PIN_PE25 (GPIO_PIOE_BASE + 25)
-+#define GPIO_PIN_PE26 (GPIO_PIOE_BASE + 26)
-+
-+static inline void *gpio_pin_to_addr(unsigned int pin)
-+{
-+ switch (pin >> 5) {
-+ case 0:
-+ return (void *)PIOA_BASE;
-+ case 1:
-+ return (void *)PIOB_BASE;
-+ case 2:
-+ return (void *)PIOC_BASE;
-+ case 3:
-+ return (void *)PIOD_BASE;
-+ case 4:
-+ return (void *)PIOE_BASE;
-+ default:
-+ return NULL;
-+ }
-+}
-+
-+void gpio_select_periph_A(unsigned int pin, int use_pullup);
-+void gpio_select_periph_B(unsigned int pin, int use_pullup);
-+
-+void gpio_enable_ebi(void);
-+
-+#ifdef AT32AP700x_CHIP_HAS_USART
-+void gpio_enable_usart0(void);
-+void gpio_enable_usart1(void);
-+void gpio_enable_usart2(void);
-+void gpio_enable_usart3(void);
-+#endif
-+#ifdef AT32AP700x_CHIP_HAS_MACB
-+void gpio_enable_macb0(void);
-+void gpio_enable_macb1(void);
-+#endif
-+#ifdef AT32AP700x_CHIP_HAS_MMCI
-+void gpio_enable_mmci(void);
-+#endif
-+
-+#endif /* __ASM_AVR32_ARCH_GPIO_H__ */
-diff --git a/include/asm-avr32/arch-at32ap700x/hmatrix2.h b/include/asm-avr32/arch-at32ap700x/hmatrix2.h
-new file mode 100644
-index 0000000..b0e787a
---- /dev/null
-+++ b/include/asm-avr32/arch-at32ap700x/hmatrix2.h
-@@ -0,0 +1,232 @@
-+/*
-+ * Register definition for the High-speed Bus Matrix
-+ */
-+#ifndef __ASM_AVR32_HMATRIX2_H__
-+#define __ASM_AVR32_HMATRIX2_H__
-+
-+/* HMATRIX2 register offsets */
-+#define HMATRIX2_MCFG0 0x0000
-+#define HMATRIX2_MCFG1 0x0004
-+#define HMATRIX2_MCFG2 0x0008
-+#define HMATRIX2_MCFG3 0x000c
-+#define HMATRIX2_MCFG4 0x0010
-+#define HMATRIX2_MCFG5 0x0014
-+#define HMATRIX2_MCFG6 0x0018
-+#define HMATRIX2_MCFG7 0x001c
-+#define HMATRIX2_MCFG8 0x0020
-+#define HMATRIX2_MCFG9 0x0024
-+#define HMATRIX2_MCFG10 0x0028
-+#define HMATRIX2_MCFG11 0x002c
-+#define HMATRIX2_MCFG12 0x0030
-+#define HMATRIX2_MCFG13 0x0034
-+#define HMATRIX2_MCFG14 0x0038
-+#define HMATRIX2_MCFG15 0x003c
-+#define HMATRIX2_SCFG0 0x0040
-+#define HMATRIX2_SCFG1 0x0044
-+#define HMATRIX2_SCFG2 0x0048
-+#define HMATRIX2_SCFG3 0x004c
-+#define HMATRIX2_SCFG4 0x0050
-+#define HMATRIX2_SCFG5 0x0054
-+#define HMATRIX2_SCFG6 0x0058
-+#define HMATRIX2_SCFG7 0x005c
-+#define HMATRIX2_SCFG8 0x0060
-+#define HMATRIX2_SCFG9 0x0064
-+#define HMATRIX2_SCFG10 0x0068
-+#define HMATRIX2_SCFG11 0x006c
-+#define HMATRIX2_SCFG12 0x0070
-+#define HMATRIX2_SCFG13 0x0074
-+#define HMATRIX2_SCFG14 0x0078
-+#define HMATRIX2_SCFG15 0x007c
-+#define HMATRIX2_PRAS0 0x0080
-+#define HMATRIX2_PRBS0 0x0084
-+#define HMATRIX2_PRAS1 0x0088
-+#define HMATRIX2_PRBS1 0x008c
-+#define HMATRIX2_PRAS2 0x0090
-+#define HMATRIX2_PRBS2 0x0094
-+#define HMATRIX2_PRAS3 0x0098
-+#define HMATRIX2_PRBS3 0x009c
-+#define HMATRIX2_PRAS4 0x00a0
-+#define HMATRIX2_PRBS4 0x00a4
-+#define HMATRIX2_PRAS5 0x00a8
-+#define HMATRIX2_PRBS5 0x00ac
-+#define HMATRIX2_PRAS6 0x00b0
-+#define HMATRIX2_PRBS6 0x00b4
-+#define HMATRIX2_PRAS7 0x00b8
-+#define HMATRIX2_PRBS7 0x00bc
-+#define HMATRIX2_PRAS8 0x00c0
-+#define HMATRIX2_PRBS8 0x00c4
-+#define HMATRIX2_PRAS9 0x00c8
-+#define HMATRIX2_PRBS9 0x00cc
-+#define HMATRIX2_PRAS10 0x00d0
-+#define HMATRIX2_PRBS10 0x00d4
-+#define HMATRIX2_PRAS11 0x00d8
-+#define HMATRIX2_PRBS11 0x00dc
-+#define HMATRIX2_PRAS12 0x00e0
-+#define HMATRIX2_PRBS12 0x00e4
-+#define HMATRIX2_PRAS13 0x00e8
-+#define HMATRIX2_PRBS13 0x00ec
-+#define HMATRIX2_PRAS14 0x00f0
-+#define HMATRIX2_PRBS14 0x00f4
-+#define HMATRIX2_PRAS15 0x00f8
-+#define HMATRIX2_PRBS15 0x00fc
-+#define HMATRIX2_MRCR 0x0100
-+#define HMATRIX2_SFR0 0x0110
-+#define HMATRIX2_SFR1 0x0114
-+#define HMATRIX2_SFR2 0x0118
-+#define HMATRIX2_SFR3 0x011c
-+#define HMATRIX2_SFR4 0x0120
-+#define HMATRIX2_SFR5 0x0124
-+#define HMATRIX2_SFR6 0x0128
-+#define HMATRIX2_SFR7 0x012c
-+#define HMATRIX2_SFR8 0x0130
-+#define HMATRIX2_SFR9 0x0134
-+#define HMATRIX2_SFR10 0x0138
-+#define HMATRIX2_SFR11 0x013c
-+#define HMATRIX2_SFR12 0x0140
-+#define HMATRIX2_SFR13 0x0144
-+#define HMATRIX2_SFR14 0x0148
-+#define HMATRIX2_SFR15 0x014c
-+#define HMATRIX2_VERSION 0x01fc
-+
-+/* Bitfields in MCFG0 */
-+#define HMATRIX2_ULBT_OFFSET 0
-+#define HMATRIX2_ULBT_SIZE 3
-+
-+/* Bitfields in SCFG0 */
-+#define HMATRIX2_SLOT_CYCLE_OFFSET 0
-+#define HMATRIX2_SLOT_CYCLE_SIZE 8
-+#define HMATRIX2_DEFMSTR_TYPE_OFFSET 16
-+#define HMATRIX2_DEFMSTR_TYPE_SIZE 2
-+#define HMATRIX2_FIXED_DEFMSTR_OFFSET 18
-+#define HMATRIX2_FIXED_DEFMSTR_SIZE 4
-+#define HMATRIX2_ARBT_OFFSET 24
-+#define HMATRIX2_ARBT_SIZE 2
-+
-+/* Bitfields in PRAS0 */
-+#define HMATRIX2_M0PR_OFFSET 0
-+#define HMATRIX2_M0PR_SIZE 4
-+#define HMATRIX2_M1PR_OFFSET 4
-+#define HMATRIX2_M1PR_SIZE 4
-+#define HMATRIX2_M2PR_OFFSET 8
-+#define HMATRIX2_M2PR_SIZE 4
-+#define HMATRIX2_M3PR_OFFSET 12
-+#define HMATRIX2_M3PR_SIZE 4
-+#define HMATRIX2_M4PR_OFFSET 16
-+#define HMATRIX2_M4PR_SIZE 4
-+#define HMATRIX2_M5PR_OFFSET 20
-+#define HMATRIX2_M5PR_SIZE 4
-+#define HMATRIX2_M6PR_OFFSET 24
-+#define HMATRIX2_M6PR_SIZE 4
-+#define HMATRIX2_M7PR_OFFSET 28
-+#define HMATRIX2_M7PR_SIZE 4
-+
-+/* Bitfields in PRBS0 */
-+#define HMATRIX2_M8PR_OFFSET 0
-+#define HMATRIX2_M8PR_SIZE 4
-+#define HMATRIX2_M9PR_OFFSET 4
-+#define HMATRIX2_M9PR_SIZE 4
-+#define HMATRIX2_M10PR_OFFSET 8
-+#define HMATRIX2_M10PR_SIZE 4
-+#define HMATRIX2_M11PR_OFFSET 12
-+#define HMATRIX2_M11PR_SIZE 4
-+#define HMATRIX2_M12PR_OFFSET 16
-+#define HMATRIX2_M12PR_SIZE 4
-+#define HMATRIX2_M13PR_OFFSET 20
-+#define HMATRIX2_M13PR_SIZE 4
-+#define HMATRIX2_M14PR_OFFSET 24
-+#define HMATRIX2_M14PR_SIZE 4
-+#define HMATRIX2_M15PR_OFFSET 28
-+#define HMATRIX2_M15PR_SIZE 4
-+
-+/* Bitfields in MRCR */
-+#define HMATRIX2_RBC0_OFFSET 0
-+#define HMATRIX2_RBC0_SIZE 1
-+#define HMATRIX2_RBC1_OFFSET 1
-+#define HMATRIX2_RBC1_SIZE 1
-+#define HMATRIX2_RBC2_OFFSET 2
-+#define HMATRIX2_RBC2_SIZE 1
-+#define HMATRIX2_RBC3_OFFSET 3
-+#define HMATRIX2_RBC3_SIZE 1
-+#define HMATRIX2_RBC4_OFFSET 4
-+#define HMATRIX2_RBC4_SIZE 1
-+#define HMATRIX2_RBC5_OFFSET 5
-+#define HMATRIX2_RBC5_SIZE 1
-+#define HMATRIX2_RBC6_OFFSET 6
-+#define HMATRIX2_RBC6_SIZE 1
-+#define HMATRIX2_RBC7_OFFSET 7
-+#define HMATRIX2_RBC7_SIZE 1
-+#define HMATRIX2_RBC8_OFFSET 8
-+#define HMATRIX2_RBC8_SIZE 1
-+#define HMATRIX2_RBC9_OFFSET 9
-+#define HMATRIX2_RBC9_SIZE 1
-+#define HMATRIX2_RBC10_OFFSET 10
-+#define HMATRIX2_RBC10_SIZE 1
-+#define HMATRIX2_RBC11_OFFSET 11
-+#define HMATRIX2_RBC11_SIZE 1
-+#define HMATRIX2_RBC12_OFFSET 12
-+#define HMATRIX2_RBC12_SIZE 1
-+#define HMATRIX2_RBC13_OFFSET 13
-+#define HMATRIX2_RBC13_SIZE 1
-+#define HMATRIX2_RBC14_OFFSET 14
-+#define HMATRIX2_RBC14_SIZE 1
-+#define HMATRIX2_RBC15_OFFSET 15
-+#define HMATRIX2_RBC15_SIZE 1
-+
-+/* Bitfields in SFR0 */
-+#define HMATRIX2_SFR_OFFSET 0
-+#define HMATRIX2_SFR_SIZE 32
-+
-+/* Bitfields in SFR4 */
-+#define HMATRIX2_CS1A_OFFSET 1
-+#define HMATRIX2_CS1A_SIZE 1
-+#define HMATRIX2_CS3A_OFFSET 3
-+#define HMATRIX2_CS3A_SIZE 1
-+#define HMATRIX2_CS4A_OFFSET 4
-+#define HMATRIX2_CS4A_SIZE 1
-+#define HMATRIX2_CS5A_OFFSET 5
-+#define HMATRIX2_CS5A_SIZE 1
-+#define HMATRIX2_DBPUC_OFFSET 8
-+#define HMATRIX2_DBPUC_SIZE 1
-+
-+/* Bitfields in VERSION */
-+#define HMATRIX2_VERSION_OFFSET 0
-+#define HMATRIX2_VERSION_SIZE 12
-+#define HMATRIX2_MFN_OFFSET 16
-+#define HMATRIX2_MFN_SIZE 3
-+
-+/* Constants for ULBT */
-+#define HMATRIX2_ULBT_INFINITE 0
-+#define HMATRIX2_ULBT_SINGLE 1
-+#define HMATRIX2_ULBT_FOUR_BEAT 2
-+#define HMATRIX2_ULBT_SIXTEEN_BEAT 4
-+
-+/* Constants for DEFMSTR_TYPE */
-+#define HMATRIX2_DEFMSTR_TYPE_NO_DEFAULT 0
-+#define HMATRIX2_DEFMSTR_TYPE_LAST_DEFAULT 1
-+#define HMATRIX2_DEFMSTR_TYPE_FIXED_DEFAULT 2
-+
-+/* Constants for ARBT */
-+#define HMATRIX2_ARBT_ROUND_ROBIN 0
-+#define HMATRIX2_ARBT_FIXED_PRIORITY 1
-+
-+/* Bit manipulation macros */
-+#define HMATRIX2_BIT(name) \
-+ (1 << HMATRIX2_##name##_OFFSET)
-+#define HMATRIX2_BF(name,value) \
-+ (((value) & ((1 << HMATRIX2_##name##_SIZE) - 1)) \
-+ << HMATRIX2_##name##_OFFSET)
-+#define HMATRIX2_BFEXT(name,value) \
-+ (((value) >> HMATRIX2_##name##_OFFSET) \
-+ & ((1 << HMATRIX2_##name##_SIZE) - 1))
-+#define HMATRIX2_BFINS(name,value,old) \
-+ (((old) & ~(((1 << HMATRIX2_##name##_SIZE) - 1) \
-+ << HMATRIX2_##name##_OFFSET)) \
-+ | HMATRIX2_BF(name,value))
-+
-+/* Register access macros */
-+#define hmatrix2_readl(reg) \
-+ readl((void *)HMATRIX_BASE + HMATRIX2_##reg)
-+#define hmatrix2_writel(reg,value) \
-+ writel((value), (void *)HMATRIX_BASE + HMATRIX2_##reg)
-+
-+#endif /* __ASM_AVR32_HMATRIX2_H__ */
-diff --git a/include/asm-avr32/arch-at32ap700x/memory-map.h b/include/asm-avr32/arch-at32ap700x/memory-map.h
-new file mode 100644
-index 0000000..5513e88
---- /dev/null
-+++ b/include/asm-avr32/arch-at32ap700x/memory-map.h
-@@ -0,0 +1,66 @@
-+/*
-+ * Copyright (C) 2005-2006 Atmel Corporation
-+ *
-+ * See file CREDITS for list of people who contributed to this
-+ * project.
-+ *
-+ * This program is free software; you can redistribute it and/or
-+ * modify it under the terms of the GNU General Public License as
-+ * published by the Free Software Foundation; either version 2 of
-+ * the License, or (at your option) any later version.
-+ *
-+ * This program is distributed in the hope that it will be useful,
-+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
-+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-+ * GNU General Public License for more details.
-+ *
-+ * You should have received a copy of the GNU General Public License
-+ * along with this program; if not, write to the Free Software
-+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
-+ * MA 02111-1307 USA
-+ */
-+#ifndef __AT32AP7000_MEMORY_MAP_H__
-+#define __AT32AP7000_MEMORY_MAP_H__
-+
-+/* Devices on the High Speed Bus (HSB) */
-+#define LCDC_BASE 0xFF000000
-+#define DMAC_BASE 0xFF200000
-+#define USB_FIFO 0xFF300000
-+
-+/* Devices on Peripheral Bus A (PBA) */
-+#define SPI0_BASE 0xFFE00000
-+#define SPI1_BASE 0xFFE00400
-+#define TWI_BASE 0xFFE00800
-+#define USART0_BASE 0xFFE00C00
-+#define USART1_BASE 0xFFE01000
-+#define USART2_BASE 0xFFE01400
-+#define USART3_BASE 0xFFE01800
-+#define SSC0_BASE 0xFFE01C00
-+#define SSC1_BASE 0xFFE02000
-+#define SSC2_BASE 0xFFE02400
-+#define PIOA_BASE 0xFFE02800
-+#define PIOB_BASE 0xFFE02C00
-+#define PIOC_BASE 0xFFE03000
-+#define PIOD_BASE 0xFFE03400
-+#define PIOE_BASE 0xFFE03800
-+#define PSIF_BASE 0xFFE03C00
-+
-+/* Devices on Peripheral Bus B (PBB) */
-+#define SM_BASE 0xFFF00000
-+#define INTC_BASE 0xFFF00400
-+#define HMATRIX_BASE 0xFFF00800
-+#define TIMER0_BASE 0xFFF00C00
-+#define TIMER1_BASE 0xFFF01000
-+#define PWM_BASE 0xFFF01400
-+#define MACB0_BASE 0xFFF01800
-+#define MACB1_BASE 0xFFF01C00
-+#define DAC_BASE 0xFFF02000
-+#define MMCI_BASE 0xFFF02400
-+#define AUDIOC_BASE 0xFFF02800
-+#define HISI_BASE 0xFFF02C00
-+#define USB_BASE 0xFFF03000
-+#define HSMC_BASE 0xFFF03400
-+#define HSDRAMC_BASE 0xFFF03800
-+#define ECC_BASE 0xFFF03C00
-+
-+#endif /* __AT32AP7000_MEMORY_MAP_H__ */
-diff --git a/include/asm-avr32/arch-at32ap700x/mmc.h b/include/asm-avr32/arch-at32ap700x/mmc.h
-new file mode 100644
-index 0000000..fcfbbb3
---- /dev/null
-+++ b/include/asm-avr32/arch-at32ap700x/mmc.h
-@@ -0,0 +1,96 @@
-+/*
-+ * Copyright (C) 2004-2006 Atmel Corporation
-+ *
-+ * See file CREDITS for list of people who contributed to this
-+ * project.
-+ *
-+ * This program is free software; you can redistribute it and/or
-+ * modify it under the terms of the GNU General Public License as
-+ * published by the Free Software Foundation; either version 2 of
-+ * the License, or (at your option) any later version.
-+ *
-+ * This program is distributed in the hope that it will be useful,
-+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
-+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-+ * GNU General Public License for more details.
-+ *
-+ * You should have received a copy of the GNU General Public License
-+ * along with this program; if not, write to the Free Software
-+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
-+ * MA 02111-1307 USA
-+ */
-+#ifndef __ASM_AVR32_MMC_H
-+#define __ASM_AVR32_MMC_H
-+
-+struct mmc_cid {
-+ unsigned long psn;
-+ unsigned short oid;
-+ unsigned char mid;
-+ unsigned char prv;
-+ unsigned char mdt;
-+ char pnm[7];
-+};
-+
-+struct mmc_csd
-+{
-+ u8 csd_structure:2,
-+ spec_vers:4,
-+ rsvd1:2;
-+ u8 taac;
-+ u8 nsac;
-+ u8 tran_speed;
-+ u16 ccc:12,
-+ read_bl_len:4;
-+ u64 read_bl_partial:1,
-+ write_blk_misalign:1,
-+ read_blk_misalign:1,
-+ dsr_imp:1,
-+ rsvd2:2,
-+ c_size:12,
-+ vdd_r_curr_min:3,
-+ vdd_r_curr_max:3,
-+ vdd_w_curr_min:3,
-+ vdd_w_curr_max:3,
-+ c_size_mult:3,
-+ sector_size:5,
-+ erase_grp_size:5,
-+ wp_grp_size:5,
-+ wp_grp_enable:1,
-+ default_ecc:2,
-+ r2w_factor:3,
-+ write_bl_len:4,
-+ write_bl_partial:1,
-+ rsvd3:5;
-+ u8 file_format_grp:1,
-+ copy:1,
-+ perm_write_protect:1,
-+ tmp_write_protect:1,
-+ file_format:2,
-+ ecc:2;
-+ u8 crc:7;
-+ u8 one:1;
-+};
-+
-+/* MMC Command numbers */
-+#define MMC_CMD_GO_IDLE_STATE 0
-+#define MMC_CMD_SEND_OP_COND 1
-+#define MMC_CMD_ALL_SEND_CID 2
-+#define MMC_CMD_SET_RELATIVE_ADDR 3
-+#define MMC_CMD_SD_SEND_RELATIVE_ADDR 3
-+#define MMC_CMD_SET_DSR 4
-+#define MMC_CMD_SELECT_CARD 7
-+#define MMC_CMD_SEND_CSD 9
-+#define MMC_CMD_SEND_CID 10
-+#define MMC_CMD_SEND_STATUS 13
-+#define MMC_CMD_SET_BLOCKLEN 16
-+#define MMC_CMD_READ_SINGLE_BLOCK 17
-+#define MMC_CMD_READ_MULTIPLE_BLOCK 18
-+#define MMC_CMD_WRITE_BLOCK 24
-+#define MMC_CMD_APP_CMD 55
-+
-+#define MMC_ACMD_SD_SEND_OP_COND 41
-+
-+#define R1_ILLEGAL_COMMAND (1 << 22)
-+#define R1_APP_CMD (1 << 5)
-+
-+#endif /* __ASM_AVR32_MMC_H */
-diff --git a/include/configs/atngw100.h b/include/configs/atngw100.h
-new file mode 100644
-index 0000000..0be5fcb
---- /dev/null
-+++ b/include/configs/atngw100.h
-@@ -0,0 +1,177 @@
-+/*
-+ * Copyright (C) 2006 Atmel Corporation
-+ *
-+ * Configuration settings for the AVR32 Network Gateway
-+ *
-+ * See file CREDITS for list of people who contributed to this
-+ * project.
-+ *
-+ * This program is free software; you can redistribute it and/or
-+ * modify it under the terms of the GNU General Public License as
-+ * published by the Free Software Foundation; either version 2 of
-+ * the License, or (at your option) any later version.
-+ *
-+ * This program is distributed in the hope that it will be useful,
-+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
-+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-+ * GNU General Public License for more details.
-+ *
-+ * You should have received a copy of the GNU General Public License
-+ * along with this program; if not, write to the Free Software
-+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
-+ * MA 02111-1307 USA
-+ */
-+#ifndef __CONFIG_H
-+#define __CONFIG_H
-+
-+#define CONFIG_AVR32 1
-+#define CONFIG_AT32AP 1
-+#define CONFIG_AT32AP7000 1
-+#define CONFIG_ATNGW100 1
-+
-+#define CONFIG_ATNGW100_EXT_FLASH 1
-+
-+#define CFG_HZ 1000
-+
-+/*
-+ * Set up the PLL to run at 140 MHz, the CPU to run at the PLL
-+ * frequency, the HSB and PBB busses to run at 1/2 the PLL frequency
-+ * and the PBA bus to run at 1/4 the PLL frequency.
-+ */
-+#define CONFIG_PLL 1
-+#define CFG_POWER_MANAGER 1
-+#define CFG_OSC0_HZ 20000000
-+#define CFG_PLL0_DIV 1
-+#define CFG_PLL0_MUL 7
-+#define CFG_PLL0_SUPPRESS_CYCLES 16
-+#define CFG_CLKDIV_CPU 0
-+#define CFG_CLKDIV_HSB 1
-+#define CFG_CLKDIV_PBA 2
-+#define CFG_CLKDIV_PBB 1
-+
-+/*
-+ * The PLLOPT register controls the PLL like this:
-+ * icp = PLLOPT<2>
-+ * ivco = PLLOPT<1:0>
-+ *
-+ * We want icp=1 (default) and ivco=0 (80-160 MHz) or ivco=2 (150-240MHz).
-+ */
-+#define CFG_PLL0_OPT 0x04
-+
-+#define CONFIG_USART1 1
-+
-+/* User serviceable stuff */
-+#define CONFIG_DOS_PARTITION 1
-+
-+#define CONFIG_CMDLINE_TAG 1
-+#define CONFIG_SETUP_MEMORY_TAGS 1
-+#define CONFIG_INITRD_TAG 1
-+
-+#define CONFIG_STACKSIZE (2048)
-+
-+#define CONFIG_BAUDRATE 115200
-+#define CONFIG_BOOTARGS \
-+ "console=ttyS0 root=/dev/mtdblock1 rootfstype=jffs2"
-+#define CONFIG_BOOTCOMMAND \
-+ "fsload; bootm"
-+
-+/*
-+ * Only interrupt autoboot if <space> is pressed. Otherwise, garbage
-+ * data on the serial line may interrupt the boot sequence.
-+ */
-+#define CONFIG_BOOTDELAY 1
-+#define CONFIG_AUTOBOOT 1
-+#define CONFIG_AUTOBOOT_KEYED 1
-+#define CONFIG_AUTOBOOT_PROMPT \
-+ "Press SPACE to abort autoboot in %d seconds\n"
-+#define CONFIG_AUTOBOOT_DELAY_STR "d"
-+#define CONFIG_AUTOBOOT_STOP_STR " "
-+
-+/*
-+ * After booting the board for the first time, new ethernet addresses
-+ * should be generated and assigned to the environment variables
-+ * "ethaddr" and "eth1addr". This is normally done during production.
-+ */
-+#define CONFIG_OVERWRITE_ETHADDR_ONCE 1
-+#define CONFIG_NET_MULTI 1
-+
-+/*
-+ * BOOTP/DHCP options
-+ */
-+#define CONFIG_BOOTP_SUBNETMASK
-+#define CONFIG_BOOTP_GATEWAY
-+
-+#define CONFIG_DOS_PARTITION 1
-+
-+/*
-+ * Command line configuration.
-+ */
-+#include <config_cmd_default.h>
-+
-+#define CONFIG_CMD_ASKENV
-+#define CONFIG_CMD_DHCP
-+#define CONFIG_CMD_EXT2
-+#define CONFIG_CMD_FAT
-+#define CONFIG_CMD_JFFS2
-+#define CONFIG_CMD_MMC
-+#undef CONFIG_CMD_FPGA
-+#undef CONFIG_CMD_SETGETDCR
-+
-+#define CONFIG_ATMEL_USART 1
-+#define CONFIG_MACB 1
-+#define CONFIG_PIO2 1
-+#define CFG_NR_PIOS 5
-+#define CFG_HSDRAMC 1
-+#define CONFIG_MMC 1
-+
-+#define CFG_DCACHE_LINESZ 32
-+#define CFG_ICACHE_LINESZ 32
-+
-+#define CONFIG_NR_DRAM_BANKS 1
-+
-+#define CFG_FLASH_BASE 0x00000000
-+#define CFG_FLASH_SIZE 0x800000
-+#define CFG_MAX_FLASH_BANKS 1
-+#define CFG_MAX_FLASH_SECT 135
-+
-+#define CFG_MONITOR_BASE CFG_FLASH_BASE
-+
-+#define CFG_INTRAM_BASE 0x24000000
-+#define CFG_INTRAM_SIZE 0x8000
-+
-+#define CFG_SDRAM_BASE 0x10000000
-+#define CFG_SDRAM_16BIT 1
-+
-+#define CFG_ENV_IS_IN_FLASH 1
-+#define CFG_ENV_SIZE 65536
-+#define CFG_ENV_ADDR (CFG_FLASH_BASE + CFG_FLASH_SIZE - CFG_ENV_SIZE)
-+
-+#define CFG_INIT_SP_ADDR (CFG_INTRAM_BASE + CFG_INTRAM_SIZE)
-+
-+#define CFG_MALLOC_LEN (256*1024)
-+#define CFG_MALLOC_END \
-+ ({ \
-+ DECLARE_GLOBAL_DATA_PTR; \
-+ CFG_SDRAM_BASE + gd->sdram_size; \
-+ })
-+#define CFG_MALLOC_START (CFG_MALLOC_END - CFG_MALLOC_LEN)
-+
-+#define CFG_DMA_ALLOC_LEN (16384)
-+
-+/* Allow 4MB for the kernel run-time image */
-+#define CFG_LOAD_ADDR (CFG_SDRAM_BASE + 0x00400000)
-+#define CFG_BOOTPARAMS_LEN (16 * 1024)
-+
-+/* Other configuration settings that shouldn't have to change all that often */
-+#define CFG_PROMPT "Uboot> "
-+#define CFG_CBSIZE 256
-+#define CFG_MAXARGS 16
-+#define CFG_PBSIZE (CFG_CBSIZE + sizeof(CFG_PROMPT) + 16)
-+#define CFG_LONGHELP 1
-+
-+#define CFG_MEMTEST_START CFG_SDRAM_BASE
-+#define CFG_MEMTEST_END (CFG_MEMTEST_START + 0x1f00000)
-+
-+#define CFG_BAUDRATE_TABLE { 115200, 38400, 19200, 9600, 2400 }
-+
-+#endif /* __CONFIG_H */
-diff --git a/include/configs/atstk1002.h b/include/configs/atstk1002.h
-index b33e26f..95aeab6 100644
---- a/include/configs/atstk1002.h
-+++ b/include/configs/atstk1002.h
-@@ -184,8 +184,8 @@
- #define CFG_MALLOC_LEN (256*1024)
- #define CFG_DMA_ALLOC_LEN (16384)
-
--/* Allow 2MB for the kernel run-time image */
--#define CFG_LOAD_ADDR (CFG_SDRAM_BASE + 0x00200000)
-+/* Allow 4MB for the kernel run-time image */
-+#define CFG_LOAD_ADDR (CFG_SDRAM_BASE + 0x00400000)
- #define CFG_BOOTPARAMS_LEN (16 * 1024)
-
- /* Other configuration settings that shouldn't have to change all that often */
-diff --git a/include/configs/atstk1003.h b/include/configs/atstk1003.h
-new file mode 100644
-index 0000000..194788b
---- /dev/null
-+++ b/include/configs/atstk1003.h
-@@ -0,0 +1,184 @@
-+/*
-+ * Copyright (C) 2007 Atmel Corporation
-+ *
-+ * Configuration settings for the ATSTK1003 CPU daughterboard
-+ *
-+ * See file CREDITS for list of people who contributed to this
-+ * project.
-+ *
-+ * This program is free software; you can redistribute it and/or
-+ * modify it under the terms of the GNU General Public License as
-+ * published by the Free Software Foundation; either version 2 of
-+ * the License, or (at your option) any later version.
-+ *
-+ * This program is distributed in the hope that it will be useful,
-+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
-+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-+ * GNU General Public License for more details.
-+ *
-+ * You should have received a copy of the GNU General Public License
-+ * along with this program; if not, write to the Free Software
-+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
-+ * MA 02111-1307 USA
-+ */
-+#ifndef __CONFIG_H
-+#define __CONFIG_H
-+
-+#define CONFIG_AVR32 1
-+#define CONFIG_AT32AP 1
-+#define CONFIG_AT32AP7001 1
-+#define CONFIG_ATSTK1003 1
-+#define CONFIG_ATSTK1000 1
-+
-+#define CONFIG_ATSTK1000_EXT_FLASH 1
-+
-+/*
-+ * Timer clock frequency. We're using the CPU-internal COUNT register
-+ * for this, so this is equivalent to the CPU core clock frequency
-+ */
-+#define CFG_HZ 1000
-+
-+/*
-+ * Set up the PLL to run at 140 MHz, the CPU to run at the PLL
-+ * frequency, the HSB and PBB at 1/2, and the PBA to run at 1/4 the
-+ * PLL frequency.
-+ * (CFG_OSC0_HZ * CFG_PLL0_MUL) / CFG_PLL0_DIV = PLL MHz
-+ */
-+#define CONFIG_PLL 1
-+#define CFG_POWER_MANAGER 1
-+#define CFG_OSC0_HZ 20000000
-+#define CFG_PLL0_DIV 1
-+#define CFG_PLL0_MUL 7
-+#define CFG_PLL0_SUPPRESS_CYCLES 16
-+/*
-+ * Set the CPU running at:
-+ * PLL / (2^CFG_CLKDIV_CPU) = CPU MHz
-+ */
-+#define CFG_CLKDIV_CPU 0
-+/*
-+ * Set the HSB running at:
-+ * PLL / (2^CFG_CLKDIV_HSB) = HSB MHz
-+ */
-+#define CFG_CLKDIV_HSB 1
-+/*
-+ * Set the PBA running at:
-+ * PLL / (2^CFG_CLKDIV_PBA) = PBA MHz
-+ */
-+#define CFG_CLKDIV_PBA 2
-+/*
-+ * Set the PBB running at:
-+ * PLL / (2^CFG_CLKDIV_PBB) = PBB MHz
-+ */
-+#define CFG_CLKDIV_PBB 1
-+
-+/*
-+ * The PLLOPT register controls the PLL like this:
-+ * icp = PLLOPT<2>
-+ * ivco = PLLOPT<1:0>
-+ *
-+ * We want icp=1 (default) and ivco=0 (80-160 MHz) or ivco=2 (150-240MHz).
-+ */
-+#define CFG_PLL0_OPT 0x04
-+
-+#undef CONFIG_USART0
-+#define CONFIG_USART1 1
-+#undef CONFIG_USART2
-+#undef CONFIG_USART3
-+
-+/* User serviceable stuff */
-+#define CONFIG_DOS_PARTITION 1
-+
-+#define CONFIG_CMDLINE_TAG 1
-+#define CONFIG_SETUP_MEMORY_TAGS 1
-+#define CONFIG_INITRD_TAG 1
-+
-+#define CONFIG_STACKSIZE (2048)
-+
-+#define CONFIG_BAUDRATE 115200
-+#define CONFIG_BOOTARGS \
-+ "console=ttyS0 root=/dev/mmcblk0p1 rootwait"
-+
-+#define CONFIG_BOOTCOMMAND \
-+ "mmcinit; ext2load mmc 0:1 0x10400000 /boot/uImage; bootm"
-+
-+/*
-+ * Only interrupt autoboot if <space> is pressed. Otherwise, garbage
-+ * data on the serial line may interrupt the boot sequence.
-+ */
-+#define CONFIG_BOOTDELAY 1
-+#define CONFIG_AUTOBOOT 1
-+#define CONFIG_AUTOBOOT_KEYED 1
-+#define CONFIG_AUTOBOOT_PROMPT \
-+ "Press SPACE to abort autoboot in %d seconds\n"
-+#define CONFIG_AUTOBOOT_DELAY_STR "d"
-+#define CONFIG_AUTOBOOT_STOP_STR " "
-+
-+/*
-+ * Command line configuration.
-+ */
-+#include <config_cmd_default.h>
-+
-+#define CONFIG_CMD_ASKENV
-+#define CONFIG_CMD_EXT2
-+#define CONFIG_CMD_FAT
-+#define CONFIG_CMD_JFFS2
-+#define CONFIG_CMD_MMC
-+
-+#undef CONFIG_CMD_FPGA
-+#undef CONFIG_CMD_NET
-+#undef CONFIG_CMD_NFS
-+#undef CONFIG_CMD_SETGETDCR
-+#undef CONFIG_CMD_XIMG
-+
-+#define CONFIG_ATMEL_USART 1
-+#define CONFIG_PIO2 1
-+#define CFG_HSDRAMC 1
-+#define CONFIG_MMC 1
-+
-+#define CFG_DCACHE_LINESZ 32
-+#define CFG_ICACHE_LINESZ 32
-+
-+#define CONFIG_NR_DRAM_BANKS 1
-+
-+/* External flash on STK1000 */
-+#if 0
-+#define CFG_FLASH_CFI 1
-+#define CFG_FLASH_CFI_DRIVER 1
-+#endif
-+
-+#define CFG_FLASH_BASE 0x00000000
-+#define CFG_FLASH_SIZE 0x800000
-+#define CFG_MAX_FLASH_BANKS 1
-+#define CFG_MAX_FLASH_SECT 135
-+
-+#define CFG_MONITOR_BASE CFG_FLASH_BASE
-+
-+#define CFG_INTRAM_BASE 0x24000000
-+#define CFG_INTRAM_SIZE 0x8000
-+
-+#define CFG_SDRAM_BASE 0x10000000
-+
-+#define CFG_ENV_IS_IN_FLASH 1
-+#define CFG_ENV_SIZE 65536
-+#define CFG_ENV_ADDR (CFG_FLASH_BASE + CFG_FLASH_SIZE - CFG_ENV_SIZE)
-+
-+#define CFG_INIT_SP_ADDR (CFG_INTRAM_BASE + CFG_INTRAM_SIZE)
-+
-+#define CFG_MALLOC_LEN (256*1024)
-+
-+/* Allow 4MB for the kernel run-time image */
-+#define CFG_LOAD_ADDR (CFG_SDRAM_BASE + 0x00400000)
-+#define CFG_BOOTPARAMS_LEN (16 * 1024)
-+
-+/* Other configuration settings that shouldn't have to change all that often */
-+#define CFG_PROMPT "Uboot> "
-+#define CFG_CBSIZE 256
-+#define CFG_MAXARGS 16
-+#define CFG_PBSIZE (CFG_CBSIZE + sizeof(CFG_PROMPT) + 16)
-+#define CFG_LONGHELP 1
-+
-+#define CFG_MEMTEST_START CFG_SDRAM_BASE
-+#define CFG_MEMTEST_END (CFG_MEMTEST_START + 0x700000)
-+#define CFG_BAUDRATE_TABLE { 115200, 38400, 19200, 9600, 2400 }
-+
-+#endif /* __CONFIG_H */
-diff --git a/include/configs/atstk1004.h b/include/configs/atstk1004.h
-new file mode 100644
-index 0000000..b81fc21
---- /dev/null
-+++ b/include/configs/atstk1004.h
-@@ -0,0 +1,185 @@
-+/*
-+ * Copyright (C) 2007 Atmel Corporation
-+ *
-+ * Configuration settings for the ATSTK1003 CPU daughterboard
-+ *
-+ * See file CREDITS for list of people who contributed to this
-+ * project.
-+ *
-+ * This program is free software; you can redistribute it and/or
-+ * modify it under the terms of the GNU General Public License as
-+ * published by the Free Software Foundation; either version 2 of
-+ * the License, or (at your option) any later version.
-+ *
-+ * This program is distributed in the hope that it will be useful,
-+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
-+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-+ * GNU General Public License for more details.
-+ *
-+ * You should have received a copy of the GNU General Public License
-+ * along with this program; if not, write to the Free Software
-+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
-+ * MA 02111-1307 USA
-+ */
-+#ifndef __CONFIG_H
-+#define __CONFIG_H
-+
-+#define CONFIG_AVR32 1
-+#define CONFIG_AT32AP 1
-+#define CONFIG_AT32AP7002 1
-+#define CONFIG_ATSTK1004 1
-+#define CONFIG_ATSTK1000 1
-+
-+#define CONFIG_ATSTK1000_EXT_FLASH 1
-+
-+/*
-+ * Timer clock frequency. We're using the CPU-internal COUNT register
-+ * for this, so this is equivalent to the CPU core clock frequency
-+ */
-+#define CFG_HZ 1000
-+
-+/*
-+ * Set up the PLL to run at 140 MHz, the CPU to run at the PLL
-+ * frequency, the HSB and PBB at 1/2, and the PBA to run at 1/4 the
-+ * PLL frequency.
-+ * (CFG_OSC0_HZ * CFG_PLL0_MUL) / CFG_PLL0_DIV = PLL MHz
-+ */
-+#define CONFIG_PLL 1
-+#define CFG_POWER_MANAGER 1
-+#define CFG_OSC0_HZ 20000000
-+#define CFG_PLL0_DIV 1
-+#define CFG_PLL0_MUL 7
-+#define CFG_PLL0_SUPPRESS_CYCLES 16
-+/*
-+ * Set the CPU running at:
-+ * PLL / (2^CFG_CLKDIV_CPU) = CPU MHz
-+ */
-+#define CFG_CLKDIV_CPU 0
-+/*
-+ * Set the HSB running at:
-+ * PLL / (2^CFG_CLKDIV_HSB) = HSB MHz
-+ */
-+#define CFG_CLKDIV_HSB 1
-+/*
-+ * Set the PBA running at:
-+ * PLL / (2^CFG_CLKDIV_PBA) = PBA MHz
-+ */
-+#define CFG_CLKDIV_PBA 2
-+/*
-+ * Set the PBB running at:
-+ * PLL / (2^CFG_CLKDIV_PBB) = PBB MHz
-+ */
-+#define CFG_CLKDIV_PBB 1
-+
-+/*
-+ * The PLLOPT register controls the PLL like this:
-+ * icp = PLLOPT<2>
-+ * ivco = PLLOPT<1:0>
-+ *
-+ * We want icp=1 (default) and ivco=0 (80-160 MHz) or ivco=2 (150-240MHz).
-+ */
-+#define CFG_PLL0_OPT 0x04
-+
-+#undef CONFIG_USART0
-+#define CONFIG_USART1 1
-+#undef CONFIG_USART2
-+#undef CONFIG_USART3
-+
-+/* User serviceable stuff */
-+#define CONFIG_DOS_PARTITION 1
-+
-+#define CONFIG_CMDLINE_TAG 1
-+#define CONFIG_SETUP_MEMORY_TAGS 1
-+#define CONFIG_INITRD_TAG 1
-+
-+#define CONFIG_STACKSIZE (2048)
-+
-+#define CONFIG_BAUDRATE 115200
-+#define CONFIG_BOOTARGS \
-+ "console=ttyS0 root=/dev/mmcblk0p1 rootwait"
-+
-+#define CONFIG_BOOTCOMMAND \
-+ "mmcinit; ext2load mmc 0:1 0x10200000 /boot/uImage; bootm"
-+
-+/*
-+ * Only interrupt autoboot if <space> is pressed. Otherwise, garbage
-+ * data on the serial line may interrupt the boot sequence.
-+ */
-+#define CONFIG_BOOTDELAY 1
-+#define CONFIG_AUTOBOOT 1
-+#define CONFIG_AUTOBOOT_KEYED 1
-+#define CONFIG_AUTOBOOT_PROMPT \
-+ "Press SPACE to abort autoboot in %d seconds\n"
-+#define CONFIG_AUTOBOOT_DELAY_STR "d"
-+#define CONFIG_AUTOBOOT_STOP_STR " "
-+
-+/*
-+ * Command line configuration.
-+ */
-+#include <config_cmd_default.h>
-+
-+#define CONFIG_CMD_ASKENV
-+#define CONFIG_CMD_EXT2
-+#define CONFIG_CMD_FAT
-+#define CONFIG_CMD_JFFS2
-+#define CONFIG_CMD_MMC
-+
-+#undef CONFIG_CMD_FPGA
-+#undef CONFIG_CMD_NET
-+#undef CONFIG_CMD_NFS
-+#undef CONFIG_CMD_SETGETDCR
-+#undef CONFIG_CMD_XIMG
-+
-+#define CONFIG_ATMEL_USART 1
-+#define CONFIG_PIO2 1
-+#define CFG_HSDRAMC 1
-+#define CONFIG_MMC 1
-+
-+#define CFG_DCACHE_LINESZ 32
-+#define CFG_ICACHE_LINESZ 32
-+
-+#define CONFIG_NR_DRAM_BANKS 1
-+
-+/* External flash on STK1000 */
-+#if 0
-+#define CFG_FLASH_CFI 1
-+#define CFG_FLASH_CFI_DRIVER 1
-+#endif
-+
-+#define CFG_FLASH_BASE 0x00000000
-+#define CFG_FLASH_SIZE 0x800000
-+#define CFG_MAX_FLASH_BANKS 1
-+#define CFG_MAX_FLASH_SECT 135
-+
-+#define CFG_MONITOR_BASE CFG_FLASH_BASE
-+
-+#define CFG_INTRAM_BASE 0x24000000
-+#define CFG_INTRAM_SIZE 0x8000
-+
-+#define CFG_SDRAM_BASE 0x10000000
-+#define CFG_SDRAM_16BIT 1
-+
-+#define CFG_ENV_IS_IN_FLASH 1
-+#define CFG_ENV_SIZE 65536
-+#define CFG_ENV_ADDR (CFG_FLASH_BASE + CFG_FLASH_SIZE - CFG_ENV_SIZE)
-+
-+#define CFG_INIT_SP_ADDR (CFG_INTRAM_BASE + CFG_INTRAM_SIZE)
-+
-+#define CFG_MALLOC_LEN (256*1024)
-+
-+/* Allow 2MB for the kernel run-time image */
-+#define CFG_LOAD_ADDR (CFG_SDRAM_BASE + 0x00200000)
-+#define CFG_BOOTPARAMS_LEN (16 * 1024)
-+
-+/* Other configuration settings that shouldn't have to change all that often */
-+#define CFG_PROMPT "Uboot> "
-+#define CFG_CBSIZE 256
-+#define CFG_MAXARGS 16
-+#define CFG_PBSIZE (CFG_CBSIZE + sizeof(CFG_PROMPT) + 16)
-+#define CFG_LONGHELP 1
-+
-+#define CFG_MEMTEST_START CFG_SDRAM_BASE
-+#define CFG_MEMTEST_END (CFG_MEMTEST_START + 0x700000)
-+#define CFG_BAUDRATE_TABLE { 115200, 38400, 19200, 9600, 2400 }
-+
-+#endif /* __CONFIG_H */
-diff --git a/lib_avr32/board.c b/lib_avr32/board.c
-index 11d864f..4729e58 100644
---- a/lib_avr32/board.c
-+++ b/lib_avr32/board.c
-@@ -264,6 +264,7 @@ void board_init_r(gd_t *new_gd, ulong dest_addr)
- #ifndef CFG_ENV_IS_NOWHERE
- extern char * env_name_spec;
- #endif
-+ char *s;
- cmd_tbl_t *cmdtp;
- bd_t *bd;
-
-@@ -334,11 +335,20 @@ void board_init_r(gd_t *new_gd, ulong dest_addr)
- /* initialize environment */
- env_relocate();
-
-+ bd->bi_ip_addr = getenv_IPaddr ("ipaddr");
-+
- devices_init();
- jumptable_init();
- console_init_r();
-
-+ s = getenv("loadaddr");
-+ if (s)
-+ load_addr = simple_strtoul(s, NULL, 16);
-+
- #if defined(CONFIG_CMD_NET)
-+ s = getenv("bootfile");
-+ if (s)
-+ copy_filename(BootFile, s, sizeof(BootFile));
- #if defined(CONFIG_NET_MULTI)
- puts("Net: ");
- #endif
-diff --git a/net/eth.c b/net/eth.c
-index 1b56a35..3e24a4c 100644
---- a/net/eth.c
-+++ b/net/eth.c
-@@ -60,6 +60,7 @@ extern int npe_initialize(bd_t *);
- extern int uec_initialize(int);
- extern int bfin_EMAC_initialize(bd_t *);
- extern int atstk1000_eth_initialize(bd_t *);
-+extern int atngw100_eth_initialize(bd_t *);
- extern int mcffec_initialize(bd_t*);
-
- static struct eth_device *eth_devices, *eth_current;
-@@ -254,6 +255,9 @@ int eth_initialize(bd_t *bis)
- #if defined(CONFIG_ATSTK1000)
- atstk1000_eth_initialize(bis);
- #endif
-+#if defined(CONFIG_ATNGW100)
-+ atngw100_eth_initialize(bis);
-+#endif
- #if defined(CONFIG_MCFFEC)
- mcffec_initialize(bis);
- #endif
projects / buildroot.git / commitdiff