configs/qemu: bump relevant config versions

Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

diff --git a/board/qemu/arm-nuri/readme.txt b/board/qemu/arm-nuri/readme.txt
index 0fed2f798fb34cc347ad3c8c5b7cbe90559f9095..6fdba81dc233af657f329729e5b0830f9b8bf2bc 100644 (file)
--- a/board/qemu/arm-nuri/readme.txt
+++ b/board/qemu/arm-nuri/readme.txt
@@ -7,4 +7,4 @@ graphical window is the framebuffer.
 
 Startup time is slow because of the SMP CPU emulation so be patient.
 
-Tested with QEMU 1.6.0
+Tested with QEMU 1.6.1

diff --git a/board/qemu/arm-versatile/linux-3.11.config b/board/qemu/arm-versatile/linux-3.11.config
deleted file mode 100644 (file)
index da73575..0000000
--- a/board/qemu/arm-versatile/linux-3.11.config
+++ /dev/null
@@ -1,89 +0,0 @@
-CONFIG_ARCH_VERSATILE=y
-CONFIG_EXPERIMENTAL=y
-# CONFIG_LOCALVERSION_AUTO is not set
-CONFIG_SYSVIPC=y
-CONFIG_LOG_BUF_SHIFT=14
-CONFIG_BLK_DEV_INITRD=y
-CONFIG_SLAB=y
-CONFIG_MODULES=y
-CONFIG_MODULE_UNLOAD=y
-CONFIG_MACH_VERSATILE_AB=y
-CONFIG_PCI=y
-CONFIG_AEABI=y
-# CONFIG_OABI_COMPAT is not set
-CONFIG_LEDS=y
-CONFIG_LEDS_CPU=y
-CONFIG_ZBOOT_ROM_TEXT=0x0
-CONFIG_ZBOOT_ROM_BSS=0x0
-CONFIG_CMDLINE="root=1f03 mem=32M"
-CONFIG_PM=y
-CONFIG_NET=y
-CONFIG_PACKET=y
-CONFIG_UNIX=y
-CONFIG_INET=y
-CONFIG_IP_MULTICAST=y
-CONFIG_IP_PNP=y
-CONFIG_IP_PNP_BOOTP=y
-# CONFIG_INET_DIAG is not set
-# CONFIG_IPV6 is not set
-CONFIG_MTD=y
-CONFIG_MTD_PARTITIONS=y
-CONFIG_MTD_CMDLINE_PARTS=y
-CONFIG_MTD_CHAR=y
-CONFIG_MTD_BLOCK=y
-CONFIG_MTD_CFI=y
-CONFIG_MTD_CFI_ADV_OPTIONS=y
-CONFIG_MTD_CFI_INTELEXT=y
-CONFIG_MTD_PHYSMAP=y
-CONFIG_BLK_DEV_RAM=y
-CONFIG_SCSI=y
-CONFIG_BLK_DEV_SD=y
-CONFIG_SCSI_SYM53C8XX_2=y
-CONFIG_EEPROM_LEGACY=m
-CONFIG_NETDEVICES=y
-CONFIG_NET_ETHERNET=y
-CONFIG_SMC91X=y
-# CONFIG_SERIO_SERPORT is not set
-CONFIG_SERIO_AMBAKMI=y
-CONFIG_SERIAL_8250=m
-CONFIG_SERIAL_8250_EXTENDED=y
-CONFIG_SERIAL_8250_MANY_PORTS=y
-CONFIG_SERIAL_8250_SHARE_IRQ=y
-CONFIG_SERIAL_8250_RSA=y
-CONFIG_SERIAL_AMBA_PL011=y
-CONFIG_SERIAL_AMBA_PL011_CONSOLE=y
-CONFIG_LEGACY_PTY_COUNT=16
-CONFIG_I2C=y
-CONFIG_I2C_CHARDEV=m
-# CONFIG_HWMON is not set
-CONFIG_FB=y
-CONFIG_FB_ARMCLCD=y
-CONFIG_FRAMEBUFFER_CONSOLE=y
-CONFIG_FONTS=y
-CONFIG_FONT_ACORN_8x8=y
-CONFIG_SOUND=y
-CONFIG_SND=m
-CONFIG_SND_MIXER_OSS=m
-CONFIG_SND_PCM_OSS=m
-CONFIG_SND_ARMAACI=m
-CONFIG_MMC=y
-CONFIG_MMC_ARMMMCI=m
-CONFIG_EXT2_FS=y
-CONFIG_VFAT_FS=m
-CONFIG_JFFS2_FS=y
-CONFIG_CRAMFS=y
-CONFIG_MINIX_FS=y
-CONFIG_ROMFS_FS=y
-CONFIG_NFS_FS=y
-CONFIG_NFS_V3=y
-CONFIG_ROOT_NFS=y
-CONFIG_NFSD=y
-CONFIG_NFSD_V3=y
-CONFIG_PARTITION_ADVANCED=y
-CONFIG_NLS_CODEPAGE_850=m
-CONFIG_NLS_ISO8859_1=m
-CONFIG_MAGIC_SYSRQ=y
-CONFIG_DEBUG_KERNEL=y
-CONFIG_DEBUG_USER=y
-CONFIG_DEBUG_ERRORS=y
-CONFIG_DEBUG_LL=y

diff --git a/board/qemu/arm-versatile/linux-3.12.config b/board/qemu/arm-versatile/linux-3.12.config
new file mode 100644 (file)
index 0000000..da73575
--- /dev/null
+++ b/board/qemu/arm-versatile/linux-3.12.config
@@ -0,0 +1,89 @@
+CONFIG_ARCH_VERSATILE=y
+CONFIG_EXPERIMENTAL=y
+# CONFIG_LOCALVERSION_AUTO is not set
+CONFIG_SYSVIPC=y
+CONFIG_LOG_BUF_SHIFT=14
+CONFIG_BLK_DEV_INITRD=y
+CONFIG_SLAB=y
+CONFIG_MODULES=y
+CONFIG_MODULE_UNLOAD=y
+CONFIG_MACH_VERSATILE_AB=y
+CONFIG_PCI=y
+CONFIG_AEABI=y
+# CONFIG_OABI_COMPAT is not set
+CONFIG_LEDS=y
+CONFIG_LEDS_CPU=y
+CONFIG_ZBOOT_ROM_TEXT=0x0
+CONFIG_ZBOOT_ROM_BSS=0x0
+CONFIG_CMDLINE="root=1f03 mem=32M"
+CONFIG_PM=y
+CONFIG_NET=y
+CONFIG_PACKET=y
+CONFIG_UNIX=y
+CONFIG_INET=y
+CONFIG_IP_MULTICAST=y
+CONFIG_IP_PNP=y
+CONFIG_IP_PNP_BOOTP=y
+# CONFIG_INET_DIAG is not set
+# CONFIG_IPV6 is not set
+CONFIG_MTD=y
+CONFIG_MTD_PARTITIONS=y
+CONFIG_MTD_CMDLINE_PARTS=y
+CONFIG_MTD_CHAR=y
+CONFIG_MTD_BLOCK=y
+CONFIG_MTD_CFI=y
+CONFIG_MTD_CFI_ADV_OPTIONS=y
+CONFIG_MTD_CFI_INTELEXT=y
+CONFIG_MTD_PHYSMAP=y
+CONFIG_BLK_DEV_RAM=y
+CONFIG_SCSI=y
+CONFIG_BLK_DEV_SD=y
+CONFIG_SCSI_SYM53C8XX_2=y
+CONFIG_EEPROM_LEGACY=m
+CONFIG_NETDEVICES=y
+CONFIG_NET_ETHERNET=y
+CONFIG_SMC91X=y
+# CONFIG_SERIO_SERPORT is not set
+CONFIG_SERIO_AMBAKMI=y
+CONFIG_SERIAL_8250=m
+CONFIG_SERIAL_8250_EXTENDED=y
+CONFIG_SERIAL_8250_MANY_PORTS=y
+CONFIG_SERIAL_8250_SHARE_IRQ=y
+CONFIG_SERIAL_8250_RSA=y
+CONFIG_SERIAL_AMBA_PL011=y
+CONFIG_SERIAL_AMBA_PL011_CONSOLE=y
+CONFIG_LEGACY_PTY_COUNT=16
+CONFIG_I2C=y
+CONFIG_I2C_CHARDEV=m
+# CONFIG_HWMON is not set
+CONFIG_FB=y
+CONFIG_FB_ARMCLCD=y
+CONFIG_FRAMEBUFFER_CONSOLE=y
+CONFIG_FONTS=y
+CONFIG_FONT_ACORN_8x8=y
+CONFIG_SOUND=y
+CONFIG_SND=m
+CONFIG_SND_MIXER_OSS=m
+CONFIG_SND_PCM_OSS=m
+CONFIG_SND_ARMAACI=m
+CONFIG_MMC=y
+CONFIG_MMC_ARMMMCI=m
+CONFIG_EXT2_FS=y
+CONFIG_VFAT_FS=m
+CONFIG_JFFS2_FS=y
+CONFIG_CRAMFS=y
+CONFIG_MINIX_FS=y
+CONFIG_ROMFS_FS=y
+CONFIG_NFS_FS=y
+CONFIG_NFS_V3=y
+CONFIG_ROOT_NFS=y
+CONFIG_NFSD=y
+CONFIG_NFSD_V3=y
+CONFIG_PARTITION_ADVANCED=y
+CONFIG_NLS_CODEPAGE_850=m
+CONFIG_NLS_ISO8859_1=m
+CONFIG_MAGIC_SYSRQ=y
+CONFIG_DEBUG_KERNEL=y
+CONFIG_DEBUG_USER=y
+CONFIG_DEBUG_ERRORS=y
+CONFIG_DEBUG_LL=y

diff --git a/board/qemu/arm-versatile/readme.txt b/board/qemu/arm-versatile/readme.txt
index 4902c5497f80ef08816b07c30bec88880307f55d..7d0745f38bf8643c60198da0c7fa3f2a8a07ca2f 100644 (file)
--- a/board/qemu/arm-versatile/readme.txt
+++ b/board/qemu/arm-versatile/readme.txt
@@ -5,4 +5,4 @@ Run the emulation with:
 The login prompt will appear in the terminal that started Qemu. The
 graphical window is the framebuffer.
 
-Tested with QEMU 1.6.0
+Tested with QEMU 1.6.1

diff --git a/board/qemu/arm-vexpress/readme.txt b/board/qemu/arm-vexpress/readme.txt
index 65d19962129885aa646a98857eb7560359b3d4b9..9a4694d68ad1c61bbd610cf04ea21e784bad7b41 100644 (file)
--- a/board/qemu/arm-vexpress/readme.txt
+++ b/board/qemu/arm-vexpress/readme.txt
@@ -5,4 +5,4 @@ Run the emulation with:
 The login prompt will appear in the terminal that started Qemu. The
 graphical window is the framebuffer.
 
-Tested with QEMU 1.6.0
+Tested with QEMU 1.6.1

diff --git a/board/qemu/microblazebe-mmu/linux-3.11.config b/board/qemu/microblazebe-mmu/linux-3.11.config
deleted file mode 100644 (file)
index 7083cf5..0000000
--- a/board/qemu/microblazebe-mmu/linux-3.11.config
+++ /dev/null
@@ -1,68 +0,0 @@
-CONFIG_EXPERIMENTAL=y
-CONFIG_SYSVIPC=y
-CONFIG_IKCONFIG=y
-CONFIG_IKCONFIG_PROC=y
-CONFIG_SYSFS_DEPRECATED_V2=y
-CONFIG_BLK_DEV_INITRD=y
-CONFIG_INITRAMFS_SOURCE="rootfs.cpio"
-CONFIG_INITRAMFS_COMPRESSION_GZIP=y
-# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
-CONFIG_EXPERT=y
-CONFIG_KALLSYMS_ALL=y
-CONFIG_KALLSYMS_EXTRA_PASS=y
-# CONFIG_HOTPLUG is not set
-# CONFIG_BASE_FULL is not set
-# CONFIG_FUTEX is not set
-# CONFIG_EPOLL is not set
-# CONFIG_SIGNALFD is not set
-# CONFIG_SHMEM is not set
-CONFIG_SLAB=y
-CONFIG_MODULES=y
-CONFIG_MODULE_UNLOAD=y
-# CONFIG_BLK_DEV_BSG is not set
-CONFIG_OPT_LIB_ASM=y
-CONFIG_XILINX_MICROBLAZE0_FAMILY="spartan3adsp"
-CONFIG_XILINX_MICROBLAZE0_USE_MSR_INSTR=1
-CONFIG_XILINX_MICROBLAZE0_USE_PCMP_INSTR=1
-CONFIG_XILINX_MICROBLAZE0_USE_BARREL=1
-CONFIG_XILINX_MICROBLAZE0_USE_HW_MUL=1
-CONFIG_HZ_100=y
-CONFIG_MMU=y
-CONFIG_CMDLINE_BOOL=y
-CONFIG_CMDLINE_FORCE=y
-CONFIG_NET=y
-CONFIG_PACKET=y
-CONFIG_UNIX=y
-CONFIG_INET=y
-# CONFIG_INET_LRO is not set
-# CONFIG_IPV6 is not set
-CONFIG_PROC_DEVICETREE=y
-CONFIG_BLK_DEV_RAM=y
-CONFIG_BLK_DEV_RAM_SIZE=8192
-CONFIG_NETDEVICES=y
-CONFIG_NET_ETHERNET=y
-CONFIG_XILINX_EMACLITE=y
-# CONFIG_INPUT is not set
-# CONFIG_SERIO is not set
-# CONFIG_VT is not set
-CONFIG_SERIAL_UARTLITE=y
-CONFIG_SERIAL_UARTLITE_CONSOLE=y
-# CONFIG_HW_RANDOM is not set
-# CONFIG_HWMON is not set
-# CONFIG_USB_SUPPORT is not set
-CONFIG_EXT2_FS=y
-# CONFIG_DNOTIFY is not set
-CONFIG_NFS_FS=y
-CONFIG_NFS_V3=y
-CONFIG_CIFS=y
-CONFIG_CIFS_STATS=y
-CONFIG_CIFS_STATS2=y
-CONFIG_PARTITION_ADVANCED=y
-CONFIG_DEBUG_KERNEL=y
-CONFIG_DETECT_HUNG_TASK=y
-CONFIG_DEBUG_SLAB=y
-CONFIG_DEBUG_SPINLOCK=y
-CONFIG_DEBUG_INFO=y
-# CONFIG_RCU_CPU_STALL_DETECTOR is not set
-CONFIG_EARLY_PRINTK=y
-# CONFIG_CRYPTO_ANSI_CPRNG is not set

diff --git a/board/qemu/microblazebe-mmu/linux-3.12.config b/board/qemu/microblazebe-mmu/linux-3.12.config
new file mode 100644 (file)
index 0000000..7083cf5
--- /dev/null
+++ b/board/qemu/microblazebe-mmu/linux-3.12.config
@@ -0,0 +1,68 @@
+CONFIG_EXPERIMENTAL=y
+CONFIG_SYSVIPC=y
+CONFIG_IKCONFIG=y
+CONFIG_IKCONFIG_PROC=y
+CONFIG_SYSFS_DEPRECATED_V2=y
+CONFIG_BLK_DEV_INITRD=y
+CONFIG_INITRAMFS_SOURCE="rootfs.cpio"
+CONFIG_INITRAMFS_COMPRESSION_GZIP=y
+# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
+CONFIG_EXPERT=y
+CONFIG_KALLSYMS_ALL=y
+CONFIG_KALLSYMS_EXTRA_PASS=y
+# CONFIG_HOTPLUG is not set
+# CONFIG_BASE_FULL is not set
+# CONFIG_FUTEX is not set
+# CONFIG_EPOLL is not set
+# CONFIG_SIGNALFD is not set
+# CONFIG_SHMEM is not set
+CONFIG_SLAB=y
+CONFIG_MODULES=y
+CONFIG_MODULE_UNLOAD=y
+# CONFIG_BLK_DEV_BSG is not set
+CONFIG_OPT_LIB_ASM=y
+CONFIG_XILINX_MICROBLAZE0_FAMILY="spartan3adsp"
+CONFIG_XILINX_MICROBLAZE0_USE_MSR_INSTR=1
+CONFIG_XILINX_MICROBLAZE0_USE_PCMP_INSTR=1
+CONFIG_XILINX_MICROBLAZE0_USE_BARREL=1
+CONFIG_XILINX_MICROBLAZE0_USE_HW_MUL=1
+CONFIG_HZ_100=y
+CONFIG_MMU=y
+CONFIG_CMDLINE_BOOL=y
+CONFIG_CMDLINE_FORCE=y
+CONFIG_NET=y
+CONFIG_PACKET=y
+CONFIG_UNIX=y
+CONFIG_INET=y
+# CONFIG_INET_LRO is not set
+# CONFIG_IPV6 is not set
+CONFIG_PROC_DEVICETREE=y
+CONFIG_BLK_DEV_RAM=y
+CONFIG_BLK_DEV_RAM_SIZE=8192
+CONFIG_NETDEVICES=y
+CONFIG_NET_ETHERNET=y
+CONFIG_XILINX_EMACLITE=y
+# CONFIG_INPUT is not set
+# CONFIG_SERIO is not set
+# CONFIG_VT is not set
+CONFIG_SERIAL_UARTLITE=y
+CONFIG_SERIAL_UARTLITE_CONSOLE=y
+# CONFIG_HW_RANDOM is not set
+# CONFIG_HWMON is not set
+# CONFIG_USB_SUPPORT is not set
+CONFIG_EXT2_FS=y
+# CONFIG_DNOTIFY is not set
+CONFIG_NFS_FS=y
+CONFIG_NFS_V3=y
+CONFIG_CIFS=y
+CONFIG_CIFS_STATS=y
+CONFIG_CIFS_STATS2=y
+CONFIG_PARTITION_ADVANCED=y
+CONFIG_DEBUG_KERNEL=y
+CONFIG_DETECT_HUNG_TASK=y
+CONFIG_DEBUG_SLAB=y
+CONFIG_DEBUG_SPINLOCK=y
+CONFIG_DEBUG_INFO=y
+# CONFIG_RCU_CPU_STALL_DETECTOR is not set
+CONFIG_EARLY_PRINTK=y
+# CONFIG_CRYPTO_ANSI_CPRNG is not set

diff --git a/board/qemu/microblazebe-mmu/readme.txt b/board/qemu/microblazebe-mmu/readme.txt
index 473a93426cff0f9d119506b64e1a0cbe54360c83..8ade434017b9d7d5fae4e8cdca9223408b20c725 100644 (file)
--- a/board/qemu/microblazebe-mmu/readme.txt
+++ b/board/qemu/microblazebe-mmu/readme.txt
@@ -4,4 +4,4 @@ Run the emulation with:
 
 The login prompt will appear in the terminal that started Qemu.
 
-Tested with QEMU 1.6.0
+Tested with QEMU 1.6.1

diff --git a/board/qemu/microblazeel-mmu/linux-3.11.config b/board/qemu/microblazeel-mmu/linux-3.11.config
deleted file mode 100644 (file)
index cdeb324..0000000
--- a/board/qemu/microblazeel-mmu/linux-3.11.config
+++ /dev/null
@@ -1,67 +0,0 @@
-CONFIG_EXPERIMENTAL=y
-CONFIG_SYSVIPC=y
-CONFIG_IKCONFIG=y
-CONFIG_IKCONFIG_PROC=y
-CONFIG_SYSFS_DEPRECATED_V2=y
-CONFIG_BLK_DEV_INITRD=y
-CONFIG_INITRAMFS_SOURCE="rootfs.cpio"
-CONFIG_INITRAMFS_COMPRESSION_GZIP=y
-# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
-CONFIG_EXPERT=y
-CONFIG_KALLSYMS_ALL=y
-CONFIG_KALLSYMS_EXTRA_PASS=y
-# CONFIG_HOTPLUG is not set
-# CONFIG_BASE_FULL is not set
-# CONFIG_FUTEX is not set
-# CONFIG_EPOLL is not set
-# CONFIG_SIGNALFD is not set
-# CONFIG_SHMEM is not set
-CONFIG_SLAB=y
-CONFIG_MODULES=y
-CONFIG_MODULE_UNLOAD=y
-# CONFIG_BLK_DEV_BSG is not set
-CONFIG_XILINX_MICROBLAZE0_FAMILY="spartan3adsp"
-CONFIG_XILINX_MICROBLAZE0_USE_MSR_INSTR=1
-CONFIG_XILINX_MICROBLAZE0_USE_PCMP_INSTR=1
-CONFIG_XILINX_MICROBLAZE0_USE_BARREL=1
-CONFIG_XILINX_MICROBLAZE0_USE_HW_MUL=1
-CONFIG_HZ_100=y
-CONFIG_MMU=y
-CONFIG_CMDLINE_BOOL=y
-CONFIG_CMDLINE_FORCE=y
-CONFIG_NET=y
-CONFIG_PACKET=y
-CONFIG_UNIX=y
-CONFIG_INET=y
-# CONFIG_INET_LRO is not set
-# CONFIG_IPV6 is not set
-CONFIG_PROC_DEVICETREE=y
-CONFIG_BLK_DEV_RAM=y
-CONFIG_BLK_DEV_RAM_SIZE=8192
-CONFIG_NETDEVICES=y
-CONFIG_NET_ETHERNET=y
-CONFIG_XILINX_EMACLITE=y
-# CONFIG_INPUT is not set
-# CONFIG_SERIO is not set
-# CONFIG_VT is not set
-CONFIG_SERIAL_UARTLITE=y
-CONFIG_SERIAL_UARTLITE_CONSOLE=y
-# CONFIG_HW_RANDOM is not set
-# CONFIG_HWMON is not set
-# CONFIG_USB_SUPPORT is not set
-CONFIG_EXT2_FS=y
-# CONFIG_DNOTIFY is not set
-CONFIG_NFS_FS=y
-CONFIG_NFS_V3=y
-CONFIG_CIFS=y
-CONFIG_CIFS_STATS=y
-CONFIG_CIFS_STATS2=y
-CONFIG_PARTITION_ADVANCED=y
-CONFIG_DEBUG_KERNEL=y
-CONFIG_DETECT_HUNG_TASK=y
-CONFIG_DEBUG_SLAB=y
-CONFIG_DEBUG_SPINLOCK=y
-CONFIG_DEBUG_INFO=y
-# CONFIG_RCU_CPU_STALL_DETECTOR is not set
-CONFIG_EARLY_PRINTK=y
-# CONFIG_CRYPTO_ANSI_CPRNG is not set

diff --git a/board/qemu/microblazeel-mmu/linux-3.12.config b/board/qemu/microblazeel-mmu/linux-3.12.config
new file mode 100644 (file)
index 0000000..cdeb324
--- /dev/null
+++ b/board/qemu/microblazeel-mmu/linux-3.12.config
@@ -0,0 +1,67 @@
+CONFIG_EXPERIMENTAL=y
+CONFIG_SYSVIPC=y
+CONFIG_IKCONFIG=y
+CONFIG_IKCONFIG_PROC=y
+CONFIG_SYSFS_DEPRECATED_V2=y
+CONFIG_BLK_DEV_INITRD=y
+CONFIG_INITRAMFS_SOURCE="rootfs.cpio"
+CONFIG_INITRAMFS_COMPRESSION_GZIP=y
+# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
+CONFIG_EXPERT=y
+CONFIG_KALLSYMS_ALL=y
+CONFIG_KALLSYMS_EXTRA_PASS=y
+# CONFIG_HOTPLUG is not set
+# CONFIG_BASE_FULL is not set
+# CONFIG_FUTEX is not set
+# CONFIG_EPOLL is not set
+# CONFIG_SIGNALFD is not set
+# CONFIG_SHMEM is not set
+CONFIG_SLAB=y
+CONFIG_MODULES=y
+CONFIG_MODULE_UNLOAD=y
+# CONFIG_BLK_DEV_BSG is not set
+CONFIG_XILINX_MICROBLAZE0_FAMILY="spartan3adsp"
+CONFIG_XILINX_MICROBLAZE0_USE_MSR_INSTR=1
+CONFIG_XILINX_MICROBLAZE0_USE_PCMP_INSTR=1
+CONFIG_XILINX_MICROBLAZE0_USE_BARREL=1
+CONFIG_XILINX_MICROBLAZE0_USE_HW_MUL=1
+CONFIG_HZ_100=y
+CONFIG_MMU=y
+CONFIG_CMDLINE_BOOL=y
+CONFIG_CMDLINE_FORCE=y
+CONFIG_NET=y
+CONFIG_PACKET=y
+CONFIG_UNIX=y
+CONFIG_INET=y
+# CONFIG_INET_LRO is not set
+# CONFIG_IPV6 is not set
+CONFIG_PROC_DEVICETREE=y
+CONFIG_BLK_DEV_RAM=y
+CONFIG_BLK_DEV_RAM_SIZE=8192
+CONFIG_NETDEVICES=y
+CONFIG_NET_ETHERNET=y
+CONFIG_XILINX_EMACLITE=y
+# CONFIG_INPUT is not set
+# CONFIG_SERIO is not set
+# CONFIG_VT is not set
+CONFIG_SERIAL_UARTLITE=y
+CONFIG_SERIAL_UARTLITE_CONSOLE=y
+# CONFIG_HW_RANDOM is not set
+# CONFIG_HWMON is not set
+# CONFIG_USB_SUPPORT is not set
+CONFIG_EXT2_FS=y
+# CONFIG_DNOTIFY is not set
+CONFIG_NFS_FS=y
+CONFIG_NFS_V3=y
+CONFIG_CIFS=y
+CONFIG_CIFS_STATS=y
+CONFIG_CIFS_STATS2=y
+CONFIG_PARTITION_ADVANCED=y
+CONFIG_DEBUG_KERNEL=y
+CONFIG_DETECT_HUNG_TASK=y
+CONFIG_DEBUG_SLAB=y
+CONFIG_DEBUG_SPINLOCK=y
+CONFIG_DEBUG_INFO=y
+# CONFIG_RCU_CPU_STALL_DETECTOR is not set
+CONFIG_EARLY_PRINTK=y
+# CONFIG_CRYPTO_ANSI_CPRNG is not set

diff --git a/board/qemu/microblazeel-mmu/readme.txt b/board/qemu/microblazeel-mmu/readme.txt
index baddc7ad920e740fe7ce128278e6be821f8be13d..9ac55dbca6afdc622b26e78913b3a83664ee549f 100644 (file)
--- a/board/qemu/microblazeel-mmu/readme.txt
+++ b/board/qemu/microblazeel-mmu/readme.txt
@@ -4,4 +4,4 @@ Run the emulation with:
 
 The login prompt will appear in the terminal that started Qemu.
 
-Tested with QEMU 1.6.0
+Tested with QEMU 1.6.1

diff --git a/board/qemu/mips-malta/linux-3.11.config b/board/qemu/mips-malta/linux-3.11.config
deleted file mode 100644 (file)
index 7549ccc..0000000
--- a/board/qemu/mips-malta/linux-3.11.config
+++ /dev/null
@@ -1,76 +0,0 @@
-CONFIG_MIPS_MALTA=y
-CONFIG_CPU_MIPS32_R2=y
-CONFIG_MIPS_MT_SMP=y
-CONFIG_NO_HZ=y
-CONFIG_HIGH_RES_TIMERS=y
-CONFIG_HZ_100=y
-CONFIG_EXPERIMENTAL=y
-CONFIG_SYSVIPC=y
-CONFIG_LOG_BUF_SHIFT=15
-CONFIG_SYSFS_DEPRECATED_V2=y
-CONFIG_RELAY=y
-CONFIG_NAMESPACES=y
-CONFIG_UTS_NS=y
-CONFIG_IPC_NS=y
-CONFIG_PID_NS=y
-# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
-CONFIG_EMBEDDED=y
-# CONFIG_SYSCTL_SYSCALL is not set
-# CONFIG_COMPAT_BRK is not set
-CONFIG_SLAB=y
-CONFIG_MODULES=y
-CONFIG_MODULE_UNLOAD=y
-CONFIG_MODVERSIONS=y
-CONFIG_MODULE_SRCVERSION_ALL=y
-# CONFIG_BLK_DEV_BSG is not set
-CONFIG_PCI=y
-CONFIG_PM=y
-CONFIG_NET=y
-CONFIG_PACKET=y
-CONFIG_UNIX=y
-CONFIG_INET=y
-CONFIG_IP_PNP=y
-# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
-# CONFIG_INET_XFRM_MODE_TUNNEL is not set
-# CONFIG_INET_XFRM_MODE_BEET is not set
-# CONFIG_INET_LRO is not set
-# CONFIG_INET_DIAG is not set
-# CONFIG_IPV6 is not set
-# CONFIG_WIRELESS is not set
-CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
-# CONFIG_MISC_DEVICES is not set
-CONFIG_IDE=y
-CONFIG_BLK_DEV_IDECD=y
-CONFIG_IDE_GENERIC=y
-CONFIG_BLK_DEV_GENERIC=y
-CONFIG_BLK_DEV_PIIX=y
-CONFIG_NETDEVICES=y
-CONFIG_NET_ETHERNET=y
-CONFIG_NET_PCI=y
-CONFIG_PCNET32=y
-# CONFIG_NETDEV_1000 is not set
-# CONFIG_NETDEV_10000 is not set
-# CONFIG_WLAN is not set
-# CONFIG_INPUT_KEYBOARD is not set
-# CONFIG_INPUT_MOUSE is not set
-# CONFIG_SERIO_I8042 is not set
-CONFIG_VT_HW_CONSOLE_BINDING=y
-CONFIG_SERIAL_8250=y
-CONFIG_SERIAL_8250_CONSOLE=y
-# CONFIG_HW_RANDOM is not set
-# CONFIG_HWMON is not set
-# CONFIG_MFD_SUPPORT is not set
-CONFIG_FB=y
-CONFIG_FB_CIRRUS=y
-# CONFIG_VGA_CONSOLE is not set
-# CONFIG_HID_SUPPORT is not set
-# CONFIG_USB_SUPPORT is not set
-CONFIG_EXT2_FS=y
-CONFIG_EXT3_FS=y
-CONFIG_QUOTA=y
-CONFIG_PROC_KCORE=y
-CONFIG_TMPFS=y
-CONFIG_NFS_FS=y
-CONFIG_NFS_V3=y
-CONFIG_ROOT_NFS=y
-# CONFIG_RCU_CPU_STALL_DETECTOR is not set

diff --git a/board/qemu/mips-malta/linux-3.12.config b/board/qemu/mips-malta/linux-3.12.config
new file mode 100644 (file)
index 0000000..7549ccc
--- /dev/null
+++ b/board/qemu/mips-malta/linux-3.12.config
@@ -0,0 +1,76 @@
+CONFIG_MIPS_MALTA=y
+CONFIG_CPU_MIPS32_R2=y
+CONFIG_MIPS_MT_SMP=y
+CONFIG_NO_HZ=y
+CONFIG_HIGH_RES_TIMERS=y
+CONFIG_HZ_100=y
+CONFIG_EXPERIMENTAL=y
+CONFIG_SYSVIPC=y
+CONFIG_LOG_BUF_SHIFT=15
+CONFIG_SYSFS_DEPRECATED_V2=y
+CONFIG_RELAY=y
+CONFIG_NAMESPACES=y
+CONFIG_UTS_NS=y
+CONFIG_IPC_NS=y
+CONFIG_PID_NS=y
+# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
+CONFIG_EMBEDDED=y
+# CONFIG_SYSCTL_SYSCALL is not set
+# CONFIG_COMPAT_BRK is not set
+CONFIG_SLAB=y
+CONFIG_MODULES=y
+CONFIG_MODULE_UNLOAD=y
+CONFIG_MODVERSIONS=y
+CONFIG_MODULE_SRCVERSION_ALL=y
+# CONFIG_BLK_DEV_BSG is not set
+CONFIG_PCI=y
+CONFIG_PM=y
+CONFIG_NET=y
+CONFIG_PACKET=y
+CONFIG_UNIX=y
+CONFIG_INET=y
+CONFIG_IP_PNP=y
+# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
+# CONFIG_INET_XFRM_MODE_TUNNEL is not set
+# CONFIG_INET_XFRM_MODE_BEET is not set
+# CONFIG_INET_LRO is not set
+# CONFIG_INET_DIAG is not set
+# CONFIG_IPV6 is not set
+# CONFIG_WIRELESS is not set
+CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+# CONFIG_MISC_DEVICES is not set
+CONFIG_IDE=y
+CONFIG_BLK_DEV_IDECD=y
+CONFIG_IDE_GENERIC=y
+CONFIG_BLK_DEV_GENERIC=y
+CONFIG_BLK_DEV_PIIX=y
+CONFIG_NETDEVICES=y
+CONFIG_NET_ETHERNET=y
+CONFIG_NET_PCI=y
+CONFIG_PCNET32=y
+# CONFIG_NETDEV_1000 is not set
+# CONFIG_NETDEV_10000 is not set
+# CONFIG_WLAN is not set
+# CONFIG_INPUT_KEYBOARD is not set
+# CONFIG_INPUT_MOUSE is not set
+# CONFIG_SERIO_I8042 is not set
+CONFIG_VT_HW_CONSOLE_BINDING=y
+CONFIG_SERIAL_8250=y
+CONFIG_SERIAL_8250_CONSOLE=y
+# CONFIG_HW_RANDOM is not set
+# CONFIG_HWMON is not set
+# CONFIG_MFD_SUPPORT is not set
+CONFIG_FB=y
+CONFIG_FB_CIRRUS=y
+# CONFIG_VGA_CONSOLE is not set
+# CONFIG_HID_SUPPORT is not set
+# CONFIG_USB_SUPPORT is not set
+CONFIG_EXT2_FS=y
+CONFIG_EXT3_FS=y
+CONFIG_QUOTA=y
+CONFIG_PROC_KCORE=y
+CONFIG_TMPFS=y
+CONFIG_NFS_FS=y
+CONFIG_NFS_V3=y
+CONFIG_ROOT_NFS=y
+# CONFIG_RCU_CPU_STALL_DETECTOR is not set

diff --git a/board/qemu/mips-malta/readme.txt b/board/qemu/mips-malta/readme.txt
index 33764ead60d2568597e36dd39abba056676b7ac4..b3679270c052225ab60e5d88a2df7f4f348dbd67 100644 (file)
--- a/board/qemu/mips-malta/readme.txt
+++ b/board/qemu/mips-malta/readme.txt
@@ -6,4 +6,4 @@ The login prompt will appear in the terminal that started Qemu. The
 graphical window is the framebuffer. No keyboard support has been
 enabled.
 
-Tested with QEMU 1.6.0
+Tested with QEMU 1.6.1

diff --git a/board/qemu/mips64-malta/linux-3.11.config b/board/qemu/mips64-malta/linux-3.11.config
deleted file mode 100644 (file)
index 6e7f7ee..0000000
--- a/board/qemu/mips64-malta/linux-3.11.config
+++ /dev/null
@@ -1,78 +0,0 @@
-CONFIG_MIPS_MALTA=y
-CONFIG_CPU_MIPS64_R1=y
-CONFIG_64BIT=y
-CONFIG_64BIT_PHYS_ADDR=y
-CONFIG_MIPS_MT_SMP=y
-CONFIG_NO_HZ=y
-CONFIG_HIGH_RES_TIMERS=y
-CONFIG_HZ_100=y
-CONFIG_EXPERIMENTAL=y
-CONFIG_SYSVIPC=y
-CONFIG_LOG_BUF_SHIFT=15
-CONFIG_SYSFS_DEPRECATED_V2=y
-CONFIG_RELAY=y
-CONFIG_NAMESPACES=y
-CONFIG_UTS_NS=y
-CONFIG_IPC_NS=y
-CONFIG_PID_NS=y
-# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
-CONFIG_EMBEDDED=y
-# CONFIG_SYSCTL_SYSCALL is not set
-# CONFIG_COMPAT_BRK is not set
-CONFIG_SLAB=y
-CONFIG_MODULES=y
-CONFIG_MODULE_UNLOAD=y
-CONFIG_MODVERSIONS=y
-CONFIG_MODULE_SRCVERSION_ALL=y
-# CONFIG_BLK_DEV_BSG is not set
-CONFIG_PCI=y
-CONFIG_PM=y
-CONFIG_NET=y
-CONFIG_PACKET=y
-CONFIG_UNIX=y
-CONFIG_INET=y
-CONFIG_IP_PNP=y
-# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
-# CONFIG_INET_XFRM_MODE_TUNNEL is not set
-# CONFIG_INET_XFRM_MODE_BEET is not set
-# CONFIG_INET_LRO is not set
-# CONFIG_INET_DIAG is not set
-# CONFIG_IPV6 is not set
-# CONFIG_WIRELESS is not set
-CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
-# CONFIG_MISC_DEVICES is not set
-CONFIG_IDE=y
-CONFIG_BLK_DEV_IDECD=y
-CONFIG_IDE_GENERIC=y
-CONFIG_BLK_DEV_GENERIC=y
-CONFIG_BLK_DEV_PIIX=y
-CONFIG_NETDEVICES=y
-CONFIG_NET_ETHERNET=y
-CONFIG_NET_PCI=y
-CONFIG_PCNET32=y
-# CONFIG_NETDEV_1000 is not set
-# CONFIG_NETDEV_10000 is not set
-# CONFIG_WLAN is not set
-# CONFIG_INPUT_KEYBOARD is not set
-# CONFIG_INPUT_MOUSE is not set
-# CONFIG_SERIO_I8042 is not set
-CONFIG_VT_HW_CONSOLE_BINDING=y
-CONFIG_SERIAL_8250=y
-CONFIG_SERIAL_8250_CONSOLE=y
-# CONFIG_HW_RANDOM is not set
-# CONFIG_HWMON is not set
-# CONFIG_MFD_SUPPORT is not set
-CONFIG_FB=y
-CONFIG_FB_CIRRUS=y
-# CONFIG_VGA_CONSOLE is not set
-# CONFIG_HID_SUPPORT is not set
-# CONFIG_USB_SUPPORT is not set
-CONFIG_EXT2_FS=y
-CONFIG_EXT3_FS=y
-CONFIG_QUOTA=y
-CONFIG_PROC_KCORE=y
-CONFIG_TMPFS=y
-CONFIG_NFS_FS=y
-CONFIG_NFS_V3=y
-CONFIG_ROOT_NFS=y
-# CONFIG_RCU_CPU_STALL_DETECTOR is not set

diff --git a/board/qemu/mips64-malta/linux-3.12.config b/board/qemu/mips64-malta/linux-3.12.config
new file mode 100644 (file)
index 0000000..6e7f7ee
--- /dev/null
+++ b/board/qemu/mips64-malta/linux-3.12.config
@@ -0,0 +1,78 @@
+CONFIG_MIPS_MALTA=y
+CONFIG_CPU_MIPS64_R1=y
+CONFIG_64BIT=y
+CONFIG_64BIT_PHYS_ADDR=y
+CONFIG_MIPS_MT_SMP=y
+CONFIG_NO_HZ=y
+CONFIG_HIGH_RES_TIMERS=y
+CONFIG_HZ_100=y
+CONFIG_EXPERIMENTAL=y
+CONFIG_SYSVIPC=y
+CONFIG_LOG_BUF_SHIFT=15
+CONFIG_SYSFS_DEPRECATED_V2=y
+CONFIG_RELAY=y
+CONFIG_NAMESPACES=y
+CONFIG_UTS_NS=y
+CONFIG_IPC_NS=y
+CONFIG_PID_NS=y
+# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
+CONFIG_EMBEDDED=y
+# CONFIG_SYSCTL_SYSCALL is not set
+# CONFIG_COMPAT_BRK is not set
+CONFIG_SLAB=y
+CONFIG_MODULES=y
+CONFIG_MODULE_UNLOAD=y
+CONFIG_MODVERSIONS=y
+CONFIG_MODULE_SRCVERSION_ALL=y
+# CONFIG_BLK_DEV_BSG is not set
+CONFIG_PCI=y
+CONFIG_PM=y
+CONFIG_NET=y
+CONFIG_PACKET=y
+CONFIG_UNIX=y
+CONFIG_INET=y
+CONFIG_IP_PNP=y
+# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
+# CONFIG_INET_XFRM_MODE_TUNNEL is not set
+# CONFIG_INET_XFRM_MODE_BEET is not set
+# CONFIG_INET_LRO is not set
+# CONFIG_INET_DIAG is not set
+# CONFIG_IPV6 is not set
+# CONFIG_WIRELESS is not set
+CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+# CONFIG_MISC_DEVICES is not set
+CONFIG_IDE=y
+CONFIG_BLK_DEV_IDECD=y
+CONFIG_IDE_GENERIC=y
+CONFIG_BLK_DEV_GENERIC=y
+CONFIG_BLK_DEV_PIIX=y
+CONFIG_NETDEVICES=y
+CONFIG_NET_ETHERNET=y
+CONFIG_NET_PCI=y
+CONFIG_PCNET32=y
+# CONFIG_NETDEV_1000 is not set
+# CONFIG_NETDEV_10000 is not set
+# CONFIG_WLAN is not set
+# CONFIG_INPUT_KEYBOARD is not set
+# CONFIG_INPUT_MOUSE is not set
+# CONFIG_SERIO_I8042 is not set
+CONFIG_VT_HW_CONSOLE_BINDING=y
+CONFIG_SERIAL_8250=y
+CONFIG_SERIAL_8250_CONSOLE=y
+# CONFIG_HW_RANDOM is not set
+# CONFIG_HWMON is not set
+# CONFIG_MFD_SUPPORT is not set
+CONFIG_FB=y
+CONFIG_FB_CIRRUS=y
+# CONFIG_VGA_CONSOLE is not set
+# CONFIG_HID_SUPPORT is not set
+# CONFIG_USB_SUPPORT is not set
+CONFIG_EXT2_FS=y
+CONFIG_EXT3_FS=y
+CONFIG_QUOTA=y
+CONFIG_PROC_KCORE=y
+CONFIG_TMPFS=y
+CONFIG_NFS_FS=y
+CONFIG_NFS_V3=y
+CONFIG_ROOT_NFS=y
+# CONFIG_RCU_CPU_STALL_DETECTOR is not set

diff --git a/board/qemu/mips64-malta/readme.txt b/board/qemu/mips64-malta/readme.txt
index 23b85abf74596b0665d925e6f7a91abd30cc516f..4fa8a19b16fc84fd99a4f53370bf9d2a20e6d3ac 100644 (file)
--- a/board/qemu/mips64-malta/readme.txt
+++ b/board/qemu/mips64-malta/readme.txt
@@ -8,4 +8,4 @@ enabled.
 
 This configuration is known to be flaky.
 
-Tested with QEMU 1.6.0
+Tested with QEMU 1.6.1

diff --git a/board/qemu/mipsel-malta/linux-3.11.config b/board/qemu/mipsel-malta/linux-3.11.config
deleted file mode 100644 (file)
index b51de4b..0000000
--- a/board/qemu/mipsel-malta/linux-3.11.config
+++ /dev/null
@@ -1,77 +0,0 @@
-CONFIG_MIPS_MALTA=y
-CONFIG_CPU_LITTLE_ENDIAN=y
-CONFIG_CPU_MIPS32_R2=y
-CONFIG_MIPS_MT_SMP=y
-CONFIG_NO_HZ=y
-CONFIG_HIGH_RES_TIMERS=y
-CONFIG_HZ_100=y
-CONFIG_EXPERIMENTAL=y
-CONFIG_SYSVIPC=y
-CONFIG_LOG_BUF_SHIFT=15
-CONFIG_SYSFS_DEPRECATED_V2=y
-CONFIG_RELAY=y
-CONFIG_NAMESPACES=y
-CONFIG_UTS_NS=y
-CONFIG_IPC_NS=y
-CONFIG_PID_NS=y
-# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
-CONFIG_EMBEDDED=y
-# CONFIG_SYSCTL_SYSCALL is not set
-# CONFIG_COMPAT_BRK is not set
-CONFIG_SLAB=y
-CONFIG_MODULES=y
-CONFIG_MODULE_UNLOAD=y
-CONFIG_MODVERSIONS=y
-CONFIG_MODULE_SRCVERSION_ALL=y
-# CONFIG_BLK_DEV_BSG is not set
-CONFIG_PCI=y
-CONFIG_PM=y
-CONFIG_NET=y
-CONFIG_PACKET=y
-CONFIG_UNIX=y
-CONFIG_INET=y
-CONFIG_IP_PNP=y
-# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
-# CONFIG_INET_XFRM_MODE_TUNNEL is not set
-# CONFIG_INET_XFRM_MODE_BEET is not set
-# CONFIG_INET_LRO is not set
-# CONFIG_INET_DIAG is not set
-# CONFIG_IPV6 is not set
-# CONFIG_WIRELESS is not set
-CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
-# CONFIG_MISC_DEVICES is not set
-CONFIG_IDE=y
-CONFIG_BLK_DEV_IDECD=y
-CONFIG_IDE_GENERIC=y
-CONFIG_BLK_DEV_GENERIC=y
-CONFIG_BLK_DEV_PIIX=y
-CONFIG_NETDEVICES=y
-CONFIG_NET_ETHERNET=y
-CONFIG_NET_PCI=y
-CONFIG_PCNET32=y
-# CONFIG_NETDEV_1000 is not set
-# CONFIG_NETDEV_10000 is not set
-# CONFIG_WLAN is not set
-# CONFIG_INPUT_KEYBOARD is not set
-# CONFIG_INPUT_MOUSE is not set
-# CONFIG_SERIO_I8042 is not set
-CONFIG_VT_HW_CONSOLE_BINDING=y
-CONFIG_SERIAL_8250=y
-CONFIG_SERIAL_8250_CONSOLE=y
-# CONFIG_HW_RANDOM is not set
-# CONFIG_HWMON is not set
-# CONFIG_MFD_SUPPORT is not set
-CONFIG_FB=y
-CONFIG_FB_CIRRUS=y
-# CONFIG_VGA_CONSOLE is not set
-# CONFIG_HID_SUPPORT is not set
-# CONFIG_USB_SUPPORT is not set
-CONFIG_EXT2_FS=y
-CONFIG_EXT3_FS=y
-CONFIG_QUOTA=y
-CONFIG_PROC_KCORE=y
-CONFIG_TMPFS=y
-CONFIG_NFS_FS=y
-CONFIG_NFS_V3=y
-CONFIG_ROOT_NFS=y
-# CONFIG_RCU_CPU_STALL_DETECTOR is not set

diff --git a/board/qemu/mipsel-malta/linux-3.12.config b/board/qemu/mipsel-malta/linux-3.12.config
new file mode 100644 (file)
index 0000000..b51de4b
--- /dev/null
+++ b/board/qemu/mipsel-malta/linux-3.12.config
@@ -0,0 +1,77 @@
+CONFIG_MIPS_MALTA=y
+CONFIG_CPU_LITTLE_ENDIAN=y
+CONFIG_CPU_MIPS32_R2=y
+CONFIG_MIPS_MT_SMP=y
+CONFIG_NO_HZ=y
+CONFIG_HIGH_RES_TIMERS=y
+CONFIG_HZ_100=y
+CONFIG_EXPERIMENTAL=y
+CONFIG_SYSVIPC=y
+CONFIG_LOG_BUF_SHIFT=15
+CONFIG_SYSFS_DEPRECATED_V2=y
+CONFIG_RELAY=y
+CONFIG_NAMESPACES=y
+CONFIG_UTS_NS=y
+CONFIG_IPC_NS=y
+CONFIG_PID_NS=y
+# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
+CONFIG_EMBEDDED=y
+# CONFIG_SYSCTL_SYSCALL is not set
+# CONFIG_COMPAT_BRK is not set
+CONFIG_SLAB=y
+CONFIG_MODULES=y
+CONFIG_MODULE_UNLOAD=y
+CONFIG_MODVERSIONS=y
+CONFIG_MODULE_SRCVERSION_ALL=y
+# CONFIG_BLK_DEV_BSG is not set
+CONFIG_PCI=y
+CONFIG_PM=y
+CONFIG_NET=y
+CONFIG_PACKET=y
+CONFIG_UNIX=y
+CONFIG_INET=y
+CONFIG_IP_PNP=y
+# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
+# CONFIG_INET_XFRM_MODE_TUNNEL is not set
+# CONFIG_INET_XFRM_MODE_BEET is not set
+# CONFIG_INET_LRO is not set
+# CONFIG_INET_DIAG is not set
+# CONFIG_IPV6 is not set
+# CONFIG_WIRELESS is not set
+CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+# CONFIG_MISC_DEVICES is not set
+CONFIG_IDE=y
+CONFIG_BLK_DEV_IDECD=y
+CONFIG_IDE_GENERIC=y
+CONFIG_BLK_DEV_GENERIC=y
+CONFIG_BLK_DEV_PIIX=y
+CONFIG_NETDEVICES=y
+CONFIG_NET_ETHERNET=y
+CONFIG_NET_PCI=y
+CONFIG_PCNET32=y
+# CONFIG_NETDEV_1000 is not set
+# CONFIG_NETDEV_10000 is not set
+# CONFIG_WLAN is not set
+# CONFIG_INPUT_KEYBOARD is not set
+# CONFIG_INPUT_MOUSE is not set
+# CONFIG_SERIO_I8042 is not set
+CONFIG_VT_HW_CONSOLE_BINDING=y
+CONFIG_SERIAL_8250=y
+CONFIG_SERIAL_8250_CONSOLE=y
+# CONFIG_HW_RANDOM is not set
+# CONFIG_HWMON is not set
+# CONFIG_MFD_SUPPORT is not set
+CONFIG_FB=y
+CONFIG_FB_CIRRUS=y
+# CONFIG_VGA_CONSOLE is not set
+# CONFIG_HID_SUPPORT is not set
+# CONFIG_USB_SUPPORT is not set
+CONFIG_EXT2_FS=y
+CONFIG_EXT3_FS=y
+CONFIG_QUOTA=y
+CONFIG_PROC_KCORE=y
+CONFIG_TMPFS=y
+CONFIG_NFS_FS=y
+CONFIG_NFS_V3=y
+CONFIG_ROOT_NFS=y
+# CONFIG_RCU_CPU_STALL_DETECTOR is not set

diff --git a/board/qemu/mipsel-malta/readme.txt b/board/qemu/mipsel-malta/readme.txt
index 1e17828138908ce406b10695bd822f97fe334c06..b77cc84e20a61b98eeafff2c7bcb61faadd65af0 100644 (file)
--- a/board/qemu/mipsel-malta/readme.txt
+++ b/board/qemu/mipsel-malta/readme.txt
@@ -6,4 +6,4 @@ The login prompt will appear in the terminal that started Qemu. The
 graphical window is the framebuffer. No keyboard support has been
 enabled.
 
-Tested with QEMU 1.6.0
+Tested with QEMU 1.6.1

diff --git a/board/qemu/powerpc-g3beige/linux-3.11.config b/board/qemu/powerpc-g3beige/linux-3.11.config
deleted file mode 100644 (file)
index 098dae3..0000000
--- a/board/qemu/powerpc-g3beige/linux-3.11.config
+++ /dev/null
@@ -1,86 +0,0 @@
-CONFIG_ALTIVEC=y
-CONFIG_EXPERIMENTAL=y
-CONFIG_SWAP=y
-CONFIG_SYSVIPC=y
-CONFIG_BLK_DEV_INITRD=y
-CONFIG_COMPAT_BRK=y
-CONFIG_SLAB=y
-CONFIG_LBDAF=y
-CONFIG_PPC_PMAC=y
-CONFIG_PPC_OF_BOOT_TRAMPOLINE=y
-CONFIG_PPC601_SYNC_FIX=y
-CONFIG_HIGHMEM=y
-CONFIG_NO_HZ=y
-CONFIG_BINFMT_ELF=y
-CONFIG_PROC_DEVICETREE=y
-CONFIG_PM=y
-CONFIG_SECCOMP=y
-CONFIG_PCCARD=y
-CONFIG_PCMCIA=y
-CONFIG_PCMCIA_LOAD_CIS=y
-CONFIG_PCMCIA_IOCTL=y
-CONFIG_YENTA=y
-CONFIG_ADVANCED_OPTIONS=y
-CONFIG_NET=y
-CONFIG_PACKET=y
-CONFIG_PACKET_MMAP=y
-CONFIG_UNIX=y
-CONFIG_INET=y
-CONFIG_INET_LRO=y
-CONFIG_PREVENT_FIRMWARE_BUILD=y
-CONFIG_FIRMWARE_IN_KERNEL=y
-CONFIG_CONNECTOR=y
-CONFIG_PROC_EVENTS=y
-CONFIG_BLK_DEV=y
-CONFIG_BLK_DEV_LOOP=y
-CONFIG_IDE=y
-CONFIG_IDE_GD=y
-CONFIG_IDE_GD_ATA=y
-CONFIG_BLK_DEV_IDECD=y
-CONFIG_IDE_PROC_FS=y
-CONFIG_BLK_DEV_CMD64X=y
-CONFIG_BLK_DEV_IDE_PMAC=y
-CONFIG_IEEE1394=y
-CONFIG_IEEE1394_OHCI1394=y
-CONFIG_IEEE1394_ETH1394=y
-CONFIG_IEEE1394_RAWIO=y
-CONFIG_IEEE1394_VIDEO1394=y
-CONFIG_IEEE1394_DV1394=y
-CONFIG_MACINTOSH_DRIVERS=y
-CONFIG_ADB=y
-CONFIG_ADB_CUDA=y
-CONFIG_ADB_PMU=y
-CONFIG_NETDEVICES=y
-CONFIG_NET_ETHERNET=y
-CONFIG_MACE=y
-CONFIG_BMAC=y
-CONFIG_HAPPYMEAL=y
-CONFIG_SUNGEM=y
-CONFIG_CASSINI=y
-CONFIG_NET_PCI=y
-CONFIG_PCNET32=y
-CONFIG_NE2K_PCI=y
-CONFIG_8139CP=y
-CONFIG_8139TOO=y
-CONFIG_8139TOO_PIO=y
-CONFIG_SERIO=y
-CONFIG_SERIAL_PMACZILOG=y
-CONFIG_SERIAL_PMACZILOG_TTYS=y
-CONFIG_SERIAL_PMACZILOG_CONSOLE=y
-CONFIG_HW_RANDOM=y
-CONFIG_SSB=y
-CONFIG_SSB_PCIHOST=y
-CONFIG_SSB_PCMCIAHOST=y
-CONFIG_SSB_DRIVER_PCICORE=y
-CONFIG_EXT2_FS=y
-CONFIG_EXT3_FS=y
-CONFIG_DNOTIFY=y
-CONFIG_INOTIFY=y
-CONFIG_INOTIFY_USER=y
-CONFIG_PROC_KCORE=y
-CONFIG_TMPFS=y
-CONFIG_MISC_FILESYSTEMS=y
-CONFIG_SQUASHFS=y
-CONFIG_LIBCRC32C=y
-CONFIG_BOOTX_TEXT=y
-CONFIG_CRYPTO_HW=y

diff --git a/board/qemu/powerpc-g3beige/linux-3.12.config b/board/qemu/powerpc-g3beige/linux-3.12.config
new file mode 100644 (file)
index 0000000..098dae3
--- /dev/null
+++ b/board/qemu/powerpc-g3beige/linux-3.12.config
@@ -0,0 +1,86 @@
+CONFIG_ALTIVEC=y
+CONFIG_EXPERIMENTAL=y
+CONFIG_SWAP=y
+CONFIG_SYSVIPC=y
+CONFIG_BLK_DEV_INITRD=y
+CONFIG_COMPAT_BRK=y
+CONFIG_SLAB=y
+CONFIG_LBDAF=y
+CONFIG_PPC_PMAC=y
+CONFIG_PPC_OF_BOOT_TRAMPOLINE=y
+CONFIG_PPC601_SYNC_FIX=y
+CONFIG_HIGHMEM=y
+CONFIG_NO_HZ=y
+CONFIG_BINFMT_ELF=y
+CONFIG_PROC_DEVICETREE=y
+CONFIG_PM=y
+CONFIG_SECCOMP=y
+CONFIG_PCCARD=y
+CONFIG_PCMCIA=y
+CONFIG_PCMCIA_LOAD_CIS=y
+CONFIG_PCMCIA_IOCTL=y
+CONFIG_YENTA=y
+CONFIG_ADVANCED_OPTIONS=y
+CONFIG_NET=y
+CONFIG_PACKET=y
+CONFIG_PACKET_MMAP=y
+CONFIG_UNIX=y
+CONFIG_INET=y
+CONFIG_INET_LRO=y
+CONFIG_PREVENT_FIRMWARE_BUILD=y
+CONFIG_FIRMWARE_IN_KERNEL=y
+CONFIG_CONNECTOR=y
+CONFIG_PROC_EVENTS=y
+CONFIG_BLK_DEV=y
+CONFIG_BLK_DEV_LOOP=y
+CONFIG_IDE=y
+CONFIG_IDE_GD=y
+CONFIG_IDE_GD_ATA=y
+CONFIG_BLK_DEV_IDECD=y
+CONFIG_IDE_PROC_FS=y
+CONFIG_BLK_DEV_CMD64X=y
+CONFIG_BLK_DEV_IDE_PMAC=y
+CONFIG_IEEE1394=y
+CONFIG_IEEE1394_OHCI1394=y
+CONFIG_IEEE1394_ETH1394=y
+CONFIG_IEEE1394_RAWIO=y
+CONFIG_IEEE1394_VIDEO1394=y
+CONFIG_IEEE1394_DV1394=y
+CONFIG_MACINTOSH_DRIVERS=y
+CONFIG_ADB=y
+CONFIG_ADB_CUDA=y
+CONFIG_ADB_PMU=y
+CONFIG_NETDEVICES=y
+CONFIG_NET_ETHERNET=y
+CONFIG_MACE=y
+CONFIG_BMAC=y
+CONFIG_HAPPYMEAL=y
+CONFIG_SUNGEM=y
+CONFIG_CASSINI=y
+CONFIG_NET_PCI=y
+CONFIG_PCNET32=y
+CONFIG_NE2K_PCI=y
+CONFIG_8139CP=y
+CONFIG_8139TOO=y
+CONFIG_8139TOO_PIO=y
+CONFIG_SERIO=y
+CONFIG_SERIAL_PMACZILOG=y
+CONFIG_SERIAL_PMACZILOG_TTYS=y
+CONFIG_SERIAL_PMACZILOG_CONSOLE=y
+CONFIG_HW_RANDOM=y
+CONFIG_SSB=y
+CONFIG_SSB_PCIHOST=y
+CONFIG_SSB_PCMCIAHOST=y
+CONFIG_SSB_DRIVER_PCICORE=y
+CONFIG_EXT2_FS=y
+CONFIG_EXT3_FS=y
+CONFIG_DNOTIFY=y
+CONFIG_INOTIFY=y
+CONFIG_INOTIFY_USER=y
+CONFIG_PROC_KCORE=y
+CONFIG_TMPFS=y
+CONFIG_MISC_FILESYSTEMS=y
+CONFIG_SQUASHFS=y
+CONFIG_LIBCRC32C=y
+CONFIG_BOOTX_TEXT=y
+CONFIG_CRYPTO_HW=y

diff --git a/board/qemu/powerpc-g3beige/readme.txt b/board/qemu/powerpc-g3beige/readme.txt
index 4c0bf8a3a42b9d9d46b0a6020e12d878116a5213..07cb6604a81f749187827f6aac23055798c79002 100644 (file)
--- a/board/qemu/powerpc-g3beige/readme.txt
+++ b/board/qemu/powerpc-g3beige/readme.txt
@@ -5,4 +5,4 @@ Run the emulation with:
 The login prompt will appear in the terminal that started Qemu. The
 graphical window is the framebuffer.
 
-Tested with QEMU 1.6.0
+Tested with QEMU 1.6.1

diff --git a/board/qemu/powerpc-mpc8544ds/readme.txt b/board/qemu/powerpc-mpc8544ds/readme.txt
index 8c57eadec9e7b0cd71c77091379bfa944773a616..cd56ddde3c563a717827761b0dded8277b725c3e 100644 (file)
--- a/board/qemu/powerpc-mpc8544ds/readme.txt
+++ b/board/qemu/powerpc-mpc8544ds/readme.txt
@@ -4,4 +4,4 @@ Run the emulation with:
 
 The login prompt will appear in the terminal that started Qemu.
 
-Tested with QEMU 1.6.0
+Tested with QEMU 1.6.1

diff --git a/board/qemu/powerpc-virtex-ml507/readme.txt b/board/qemu/powerpc-virtex-ml507/readme.txt
index e958d494baa5e099f944c0cbb62abee07a99ada8..a9a63788aa031e18cee675c985f70c2e26c57be1 100644 (file)
--- a/board/qemu/powerpc-virtex-ml507/readme.txt
+++ b/board/qemu/powerpc-virtex-ml507/readme.txt
@@ -5,4 +5,4 @@ Run the emulation with:
 
 The login prompt will appear in the terminal that started Qemu.
 
-Tested with QEMU 1.6.0
+Tested with QEMU 1.6.1

diff --git a/board/qemu/sh4-r2d/readme.txt b/board/qemu/sh4-r2d/readme.txt
index 45fca86d7983dff92224f445e088cc5181264b1c..2a963ebf03059e194f0cff6abfbac64a7fb6d2c6 100644 (file)
--- a/board/qemu/sh4-r2d/readme.txt
+++ b/board/qemu/sh4-r2d/readme.txt
@@ -5,4 +5,4 @@ Run the emulation with:
 The login prompt will appear in the terminal that started Qemu.
 The graphical window is the framebuffer.
 
-Tested with QEMU 1.6.0
+Tested with QEMU 1.6.1

diff --git a/board/qemu/sparc-ss10/readme.txt b/board/qemu/sparc-ss10/readme.txt
index dab4028122fbb6056509901d0b96da7afad93959..725ab30f27ee9ca4debfaf114bfaf223936e1fad 100644 (file)
--- a/board/qemu/sparc-ss10/readme.txt
+++ b/board/qemu/sparc-ss10/readme.txt
@@ -5,4 +5,4 @@ Run the emulation with:
 The login prompt will appear in the terminal that started Qemu.
 The graphical window is the framebuffer.
 
-Tested with QEMU 1.6.0
+Tested with QEMU 1.6.1

diff --git a/board/qemu/x86/linux-3.11.config b/board/qemu/x86/linux-3.11.config
deleted file mode 100644 (file)
index 5bf6944..0000000
--- a/board/qemu/x86/linux-3.11.config
+++ /dev/null
@@ -1,67 +0,0 @@
-CONFIG_EXPERIMENTAL=y
-# CONFIG_LOCALVERSION_AUTO is not set
-# CONFIG_SWAP is not set
-# CONFIG_COMPAT_BRK is not set
-# CONFIG_BLK_DEV_BSG is not set
-# CONFIG_IOSCHED_DEADLINE is not set
-# CONFIG_IOSCHED_CFQ is not set
-# CONFIG_X86_EXTENDED_PLATFORM is not set
-# CONFIG_SCHED_OMIT_FRAME_POINTER is not set
-# CONFIG_MTRR_SANITIZER is not set
-# CONFIG_SECCOMP is not set
-# CONFIG_RELOCATABLE is not set
-CONFIG_NET=y
-CONFIG_PACKET=y
-CONFIG_UNIX=y
-CONFIG_INET=y
-CONFIG_IP_PNP=y
-# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
-# CONFIG_INET_XFRM_MODE_TUNNEL is not set
-# CONFIG_INET_XFRM_MODE_BEET is not set
-# CONFIG_INET_LRO is not set
-# CONFIG_INET_DIAG is not set
-# CONFIG_IPV6 is not set
-# CONFIG_WIRELESS is not set
-# CONFIG_PREVENT_FIRMWARE_BUILD is not set
-# CONFIG_FIRMWARE_IN_KERNEL is not set
-# CONFIG_BLK_DEV is not set
-CONFIG_BLK_DEV_SD=y
-CONFIG_ATA=y
-CONFIG_ATA_PIIX=y
-CONFIG_NETDEVICES=y
-CONFIG_NET_ETHERNET=y
-CONFIG_NET_PCI=y
-CONFIG_NE2K_PCI=y
-CONFIG_8139CP=y
-# CONFIG_NETDEV_1000 is not set
-# CONFIG_NETDEV_10000 is not set
-# CONFIG_WLAN is not set
-# CONFIG_INPUT_MOUSEDEV_PSAUX is not set
-# CONFIG_INPUT_MOUSE is not set
-# CONFIG_SERIO_SERPORT is not set
-# CONFIG_LEGACY_PTYS is not set
-# CONFIG_DEVKMEM is not set
-CONFIG_SERIAL_8250=y
-CONFIG_SERIAL_8250_CONSOLE=y
-# CONFIG_HW_RANDOM is not set
-# CONFIG_HWMON is not set
-# CONFIG_MFD_SUPPORT is not set
-CONFIG_SOUND=y
-CONFIG_SND=y
-CONFIG_SND_HDA_INTEL=y
-# CONFIG_HID_SUPPORT is not set
-# CONFIG_USB_SUPPORT is not set
-# CONFIG_X86_PLATFORM_DEVICES is not set
-# CONFIG_DMIID is not set
-CONFIG_EXT2_FS=y
-# CONFIG_DNOTIFY is not set
-# CONFIG_INOTIFY_USER is not set
-# CONFIG_MISC_FILESYSTEMS is not set
-CONFIG_NFS_FS=y
-CONFIG_ROOT_NFS=y
-# CONFIG_ENABLE_WARN_DEPRECATED is not set
-# CONFIG_ENABLE_MUST_CHECK is not set
-# CONFIG_UNUSED_SYMBOLS is not set
-# CONFIG_FRAME_POINTER is not set
-# CONFIG_X86_VERBOSE_BOOTUP is not set
-# CONFIG_VIRTUALIZATION is not set

diff --git a/board/qemu/x86/linux-3.12.config b/board/qemu/x86/linux-3.12.config
new file mode 100644 (file)
index 0000000..5bf6944
--- /dev/null
+++ b/board/qemu/x86/linux-3.12.config
@@ -0,0 +1,67 @@
+CONFIG_EXPERIMENTAL=y
+# CONFIG_LOCALVERSION_AUTO is not set
+# CONFIG_SWAP is not set
+# CONFIG_COMPAT_BRK is not set
+# CONFIG_BLK_DEV_BSG is not set
+# CONFIG_IOSCHED_DEADLINE is not set
+# CONFIG_IOSCHED_CFQ is not set
+# CONFIG_X86_EXTENDED_PLATFORM is not set
+# CONFIG_SCHED_OMIT_FRAME_POINTER is not set
+# CONFIG_MTRR_SANITIZER is not set
+# CONFIG_SECCOMP is not set
+# CONFIG_RELOCATABLE is not set
+CONFIG_NET=y
+CONFIG_PACKET=y
+CONFIG_UNIX=y
+CONFIG_INET=y
+CONFIG_IP_PNP=y
+# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
+# CONFIG_INET_XFRM_MODE_TUNNEL is not set
+# CONFIG_INET_XFRM_MODE_BEET is not set
+# CONFIG_INET_LRO is not set
+# CONFIG_INET_DIAG is not set
+# CONFIG_IPV6 is not set
+# CONFIG_WIRELESS is not set
+# CONFIG_PREVENT_FIRMWARE_BUILD is not set
+# CONFIG_FIRMWARE_IN_KERNEL is not set
+# CONFIG_BLK_DEV is not set
+CONFIG_BLK_DEV_SD=y
+CONFIG_ATA=y
+CONFIG_ATA_PIIX=y
+CONFIG_NETDEVICES=y
+CONFIG_NET_ETHERNET=y
+CONFIG_NET_PCI=y
+CONFIG_NE2K_PCI=y
+CONFIG_8139CP=y
+# CONFIG_NETDEV_1000 is not set
+# CONFIG_NETDEV_10000 is not set
+# CONFIG_WLAN is not set
+# CONFIG_INPUT_MOUSEDEV_PSAUX is not set
+# CONFIG_INPUT_MOUSE is not set
+# CONFIG_SERIO_SERPORT is not set
+# CONFIG_LEGACY_PTYS is not set
+# CONFIG_DEVKMEM is not set
+CONFIG_SERIAL_8250=y
+CONFIG_SERIAL_8250_CONSOLE=y
+# CONFIG_HW_RANDOM is not set
+# CONFIG_HWMON is not set
+# CONFIG_MFD_SUPPORT is not set
+CONFIG_SOUND=y
+CONFIG_SND=y
+CONFIG_SND_HDA_INTEL=y
+# CONFIG_HID_SUPPORT is not set
+# CONFIG_USB_SUPPORT is not set
+# CONFIG_X86_PLATFORM_DEVICES is not set
+# CONFIG_DMIID is not set
+CONFIG_EXT2_FS=y
+# CONFIG_DNOTIFY is not set
+# CONFIG_INOTIFY_USER is not set
+# CONFIG_MISC_FILESYSTEMS is not set
+CONFIG_NFS_FS=y
+CONFIG_ROOT_NFS=y
+# CONFIG_ENABLE_WARN_DEPRECATED is not set
+# CONFIG_ENABLE_MUST_CHECK is not set
+# CONFIG_UNUSED_SYMBOLS is not set
+# CONFIG_FRAME_POINTER is not set
+# CONFIG_X86_VERBOSE_BOOTUP is not set
+# CONFIG_VIRTUALIZATION is not set

diff --git a/board/qemu/x86/readme.txt b/board/qemu/x86/readme.txt
index 5f3af40421fdbf918c7bc215eee8f0d9f7cbb692..c07000c039024b8bf498173fda34063b5d0f0466 100644 (file)
--- a/board/qemu/x86/readme.txt
+++ b/board/qemu/x86/readme.txt
@@ -4,4 +4,4 @@ Run the emulation with:
 
 The login prompt will appear in the graphical window.
 
-Tested with QEMU 1.6.0
+Tested with QEMU 1.6.1

diff --git a/board/qemu/x86_64/linux-3.11.config b/board/qemu/x86_64/linux-3.11.config
deleted file mode 100644 (file)
index 5bf6944..0000000
--- a/board/qemu/x86_64/linux-3.11.config
+++ /dev/null
@@ -1,67 +0,0 @@
-CONFIG_EXPERIMENTAL=y
-# CONFIG_LOCALVERSION_AUTO is not set
-# CONFIG_SWAP is not set
-# CONFIG_COMPAT_BRK is not set
-# CONFIG_BLK_DEV_BSG is not set
-# CONFIG_IOSCHED_DEADLINE is not set
-# CONFIG_IOSCHED_CFQ is not set
-# CONFIG_X86_EXTENDED_PLATFORM is not set
-# CONFIG_SCHED_OMIT_FRAME_POINTER is not set
-# CONFIG_MTRR_SANITIZER is not set
-# CONFIG_SECCOMP is not set
-# CONFIG_RELOCATABLE is not set
-CONFIG_NET=y
-CONFIG_PACKET=y
-CONFIG_UNIX=y
-CONFIG_INET=y
-CONFIG_IP_PNP=y
-# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
-# CONFIG_INET_XFRM_MODE_TUNNEL is not set
-# CONFIG_INET_XFRM_MODE_BEET is not set
-# CONFIG_INET_LRO is not set
-# CONFIG_INET_DIAG is not set
-# CONFIG_IPV6 is not set
-# CONFIG_WIRELESS is not set
-# CONFIG_PREVENT_FIRMWARE_BUILD is not set
-# CONFIG_FIRMWARE_IN_KERNEL is not set
-# CONFIG_BLK_DEV is not set
-CONFIG_BLK_DEV_SD=y
-CONFIG_ATA=y
-CONFIG_ATA_PIIX=y
-CONFIG_NETDEVICES=y
-CONFIG_NET_ETHERNET=y
-CONFIG_NET_PCI=y
-CONFIG_NE2K_PCI=y
-CONFIG_8139CP=y
-# CONFIG_NETDEV_1000 is not set
-# CONFIG_NETDEV_10000 is not set
-# CONFIG_WLAN is not set
-# CONFIG_INPUT_MOUSEDEV_PSAUX is not set
-# CONFIG_INPUT_MOUSE is not set
-# CONFIG_SERIO_SERPORT is not set
-# CONFIG_LEGACY_PTYS is not set
-# CONFIG_DEVKMEM is not set
-CONFIG_SERIAL_8250=y
-CONFIG_SERIAL_8250_CONSOLE=y
-# CONFIG_HW_RANDOM is not set
-# CONFIG_HWMON is not set
-# CONFIG_MFD_SUPPORT is not set
-CONFIG_SOUND=y
-CONFIG_SND=y
-CONFIG_SND_HDA_INTEL=y
-# CONFIG_HID_SUPPORT is not set
-# CONFIG_USB_SUPPORT is not set
-# CONFIG_X86_PLATFORM_DEVICES is not set
-# CONFIG_DMIID is not set
-CONFIG_EXT2_FS=y
-# CONFIG_DNOTIFY is not set
-# CONFIG_INOTIFY_USER is not set
-# CONFIG_MISC_FILESYSTEMS is not set
-CONFIG_NFS_FS=y
-CONFIG_ROOT_NFS=y
-# CONFIG_ENABLE_WARN_DEPRECATED is not set
-# CONFIG_ENABLE_MUST_CHECK is not set
-# CONFIG_UNUSED_SYMBOLS is not set
-# CONFIG_FRAME_POINTER is not set
-# CONFIG_X86_VERBOSE_BOOTUP is not set
-# CONFIG_VIRTUALIZATION is not set

diff --git a/board/qemu/x86_64/linux-3.12.config b/board/qemu/x86_64/linux-3.12.config
new file mode 100644 (file)
index 0000000..5bf6944
--- /dev/null
+++ b/board/qemu/x86_64/linux-3.12.config
@@ -0,0 +1,67 @@
+CONFIG_EXPERIMENTAL=y
+# CONFIG_LOCALVERSION_AUTO is not set
+# CONFIG_SWAP is not set
+# CONFIG_COMPAT_BRK is not set
+# CONFIG_BLK_DEV_BSG is not set
+# CONFIG_IOSCHED_DEADLINE is not set
+# CONFIG_IOSCHED_CFQ is not set
+# CONFIG_X86_EXTENDED_PLATFORM is not set
+# CONFIG_SCHED_OMIT_FRAME_POINTER is not set
+# CONFIG_MTRR_SANITIZER is not set
+# CONFIG_SECCOMP is not set
+# CONFIG_RELOCATABLE is not set
+CONFIG_NET=y
+CONFIG_PACKET=y
+CONFIG_UNIX=y
+CONFIG_INET=y
+CONFIG_IP_PNP=y
+# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
+# CONFIG_INET_XFRM_MODE_TUNNEL is not set
+# CONFIG_INET_XFRM_MODE_BEET is not set
+# CONFIG_INET_LRO is not set
+# CONFIG_INET_DIAG is not set
+# CONFIG_IPV6 is not set
+# CONFIG_WIRELESS is not set
+# CONFIG_PREVENT_FIRMWARE_BUILD is not set
+# CONFIG_FIRMWARE_IN_KERNEL is not set
+# CONFIG_BLK_DEV is not set
+CONFIG_BLK_DEV_SD=y
+CONFIG_ATA=y
+CONFIG_ATA_PIIX=y
+CONFIG_NETDEVICES=y
+CONFIG_NET_ETHERNET=y
+CONFIG_NET_PCI=y
+CONFIG_NE2K_PCI=y
+CONFIG_8139CP=y
+# CONFIG_NETDEV_1000 is not set
+# CONFIG_NETDEV_10000 is not set
+# CONFIG_WLAN is not set
+# CONFIG_INPUT_MOUSEDEV_PSAUX is not set
+# CONFIG_INPUT_MOUSE is not set
+# CONFIG_SERIO_SERPORT is not set
+# CONFIG_LEGACY_PTYS is not set
+# CONFIG_DEVKMEM is not set
+CONFIG_SERIAL_8250=y
+CONFIG_SERIAL_8250_CONSOLE=y
+# CONFIG_HW_RANDOM is not set
+# CONFIG_HWMON is not set
+# CONFIG_MFD_SUPPORT is not set
+CONFIG_SOUND=y
+CONFIG_SND=y
+CONFIG_SND_HDA_INTEL=y
+# CONFIG_HID_SUPPORT is not set
+# CONFIG_USB_SUPPORT is not set
+# CONFIG_X86_PLATFORM_DEVICES is not set
+# CONFIG_DMIID is not set
+CONFIG_EXT2_FS=y
+# CONFIG_DNOTIFY is not set
+# CONFIG_INOTIFY_USER is not set
+# CONFIG_MISC_FILESYSTEMS is not set
+CONFIG_NFS_FS=y
+CONFIG_ROOT_NFS=y
+# CONFIG_ENABLE_WARN_DEPRECATED is not set
+# CONFIG_ENABLE_MUST_CHECK is not set
+# CONFIG_UNUSED_SYMBOLS is not set
+# CONFIG_FRAME_POINTER is not set
+# CONFIG_X86_VERBOSE_BOOTUP is not set
+# CONFIG_VIRTUALIZATION is not set

diff --git a/board/qemu/x86_64/readme.txt b/board/qemu/x86_64/readme.txt
index d9eaf5622946def7807b2c3d53bbbde876d2b118..3c344f95a8c7aae492df5bda874053285f165fff 100644 (file)
--- a/board/qemu/x86_64/readme.txt
+++ b/board/qemu/x86_64/readme.txt
@@ -4,4 +4,4 @@ Run the emulation with:
 
 The login prompt will appear in the graphical window.
 
-Tested with QEMU 1.6.0
+Tested with QEMU 1.6.1

diff --git a/configs/qemu_arm_nuri_defconfig b/configs/qemu_arm_nuri_defconfig
index 20b825a76cd794297310d937a2837f26d7c529ac..965f55de277cccdaf00a6edfb00fdc97223df04a 100644 (file)
--- a/configs/qemu_arm_nuri_defconfig
+++ b/configs/qemu_arm_nuri_defconfig
@@ -15,11 +15,11 @@ BR2_TARGET_ROOTFS_INITRAMFS=y
 
 # Lock to 3.10 headers to avoid breaking with newer kernels
 BR2_KERNEL_HEADERS_VERSION=y
-BR2_DEFAULT_KERNEL_VERSION="3.10.15"
+BR2_DEFAULT_KERNEL_VERSION="3.10.18"
 
 # Kernel
 BR2_LINUX_KERNEL=y
 BR2_LINUX_KERNEL_CUSTOM_VERSION=y
-BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="3.10.15"
+BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="3.10.18"
 BR2_LINUX_KERNEL_DEFCONFIG="exynos4"
 BR2_LINUX_KERNEL_ZIMAGE=y

diff --git a/configs/qemu_arm_versatile_defconfig b/configs/qemu_arm_versatile_defconfig
index 322fc18c12d7304293f6c91804d7ed36b284687c..88df6c821d0370754b48e9ac41f6f424a7423134 100644 (file)
--- a/configs/qemu_arm_versatile_defconfig
+++ b/configs/qemu_arm_versatile_defconfig
@@ -10,14 +10,14 @@ BR2_TARGET_GENERIC_GETTY_PORT="ttyAMA0"
 BR2_TARGET_ROOTFS_EXT2=y
 # BR2_TARGET_ROOTFS_TAR is not set
 
-# Lock to 3.11 headers to avoid breaking with newer kernels
+# Lock to 3.12 headers to avoid breaking with newer kernels
 BR2_KERNEL_HEADERS_VERSION=y
-BR2_DEFAULT_KERNEL_VERSION="3.11.4"
+BR2_DEFAULT_KERNEL_VERSION="3.12"
 
 # Kernel
 BR2_LINUX_KERNEL=y
 BR2_LINUX_KERNEL_CUSTOM_VERSION=y
-BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="3.11.4"
+BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="3.12"
 BR2_LINUX_KERNEL_USE_CUSTOM_CONFIG=y
-BR2_LINUX_KERNEL_CUSTOM_CONFIG_FILE="board/qemu/arm-versatile/linux-3.11.config"
+BR2_LINUX_KERNEL_CUSTOM_CONFIG_FILE="board/qemu/arm-versatile/linux-3.12.config"
 BR2_LINUX_KERNEL_ZIMAGE=y

diff --git a/configs/qemu_arm_vexpress_defconfig b/configs/qemu_arm_vexpress_defconfig
index 8bd12af551877e069237b4f8f195ea7d9af9961c..324a8110fa5dffad95f57f7bac32eb35113cfdd3 100644 (file)
--- a/configs/qemu_arm_vexpress_defconfig
+++ b/configs/qemu_arm_vexpress_defconfig
@@ -13,13 +13,13 @@ BR2_TARGET_GENERIC_GETTY_PORT="ttyAMA0"
 BR2_TARGET_ROOTFS_EXT2=y
 # BR2_TARGET_ROOTFS_TAR is not set
 
-# Lock to 3.11 headers to avoid breaking with newer kernels
+# Lock to 3.12 headers to avoid breaking with newer kernels
 BR2_KERNEL_HEADERS_VERSION=y
-BR2_DEFAULT_KERNEL_VERSION="3.11.4"
+BR2_DEFAULT_KERNEL_VERSION="3.12"
 
 # Kernel
 BR2_LINUX_KERNEL=y
 BR2_LINUX_KERNEL_CUSTOM_VERSION=y
-BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="3.11.4"
+BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="3.12"
 BR2_LINUX_KERNEL_DEFCONFIG="vexpress"
 BR2_LINUX_KERNEL_ZIMAGE=y

diff --git a/configs/qemu_microblazebe_mmu_defconfig b/configs/qemu_microblazebe_mmu_defconfig
index adc70745cea61fa76ec4a159fbd9ba2a83882d3e..0a621b1be0def1f46305a87760c9f7e598906e44 100644 (file)
--- a/configs/qemu_microblazebe_mmu_defconfig
+++ b/configs/qemu_microblazebe_mmu_defconfig
@@ -19,9 +19,9 @@ BR2_TARGET_ROOTFS_INITRAMFS=y
 # Kernel
 BR2_LINUX_KERNEL=y
 BR2_LINUX_KERNEL_CUSTOM_VERSION=y
-BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="3.11.4"
+BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="3.12"
 BR2_LINUX_KERNEL_USE_CUSTOM_CONFIG=y
-BR2_LINUX_KERNEL_CUSTOM_CONFIG_FILE="board/qemu/microblazebe-mmu/linux-3.11.config"
+BR2_LINUX_KERNEL_CUSTOM_CONFIG_FILE="board/qemu/microblazebe-mmu/linux-3.12.config"
 BR2_LINUX_KERNEL_LINUX_BIN=y
 BR2_LINUX_KERNEL_USE_CUSTOM_DTS=y
 BR2_LINUX_KERNEL_CUSTOM_DTS_PATH="board/qemu/microblazebe-mmu/system.dts"

diff --git a/configs/qemu_microblazeel_mmu_defconfig b/configs/qemu_microblazeel_mmu_defconfig
index 792050586cb0e4d31bc73c0fca1142f0ac00f89a..51d58c6cf744fea66d1c35119a25df9f95892f60 100644 (file)
--- a/configs/qemu_microblazeel_mmu_defconfig
+++ b/configs/qemu_microblazeel_mmu_defconfig
@@ -19,9 +19,9 @@ BR2_TARGET_ROOTFS_INITRAMFS=y
 # Kernel
 BR2_LINUX_KERNEL=y
 BR2_LINUX_KERNEL_CUSTOM_VERSION=y
-BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="3.11.4"
+BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="3.12"
 BR2_LINUX_KERNEL_USE_CUSTOM_CONFIG=y
-BR2_LINUX_KERNEL_CUSTOM_CONFIG_FILE="board/qemu/microblazeel-mmu/linux-3.11.config"
+BR2_LINUX_KERNEL_CUSTOM_CONFIG_FILE="board/qemu/microblazeel-mmu/linux-3.12.config"
 BR2_LINUX_KERNEL_LINUX_BIN=y
 BR2_LINUX_KERNEL_USE_CUSTOM_DTS=y
 BR2_LINUX_KERNEL_CUSTOM_DTS_PATH="board/qemu/microblazeel-mmu/system.dts"

diff --git a/configs/qemu_mips64_malta_defconfig b/configs/qemu_mips64_malta_defconfig
index 0fde6c6409ae000f2012181bf8b5a5fa93244d0f..c0904b5ce98e871268283f10ad05c3358f7f06a6 100644 (file)
--- a/configs/qemu_mips64_malta_defconfig
+++ b/configs/qemu_mips64_malta_defconfig
@@ -10,16 +10,16 @@ BR2_PREFER_STATIC_LIB=y
 BR2_TARGET_ROOTFS_EXT2=y
 # BR2_TARGET_ROOTFS_TAR is not set
 
-# Lock to 3.11 headers to avoid breaking with newer kernels
+# Lock to 3.12 headers to avoid breaking with newer kernels
 BR2_KERNEL_HEADERS_VERSION=y
-BR2_DEFAULT_KERNEL_VERSION="3.11.4"
+BR2_DEFAULT_KERNEL_VERSION="3.12"
 
 # Kernel
 BR2_LINUX_KERNEL=y
 BR2_LINUX_KERNEL_CUSTOM_VERSION=y
-BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="3.11.4"
+BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="3.12"
 BR2_LINUX_KERNEL_USE_CUSTOM_CONFIG=y
-BR2_LINUX_KERNEL_CUSTOM_CONFIG_FILE="board/qemu/mips64-malta/linux-3.11.config"
+BR2_LINUX_KERNEL_CUSTOM_CONFIG_FILE="board/qemu/mips64-malta/linux-3.12.config"
 BR2_LINUX_KERNEL_VMLINUX=y
 
 # Serial port config

diff --git a/configs/qemu_mips_malta_defconfig b/configs/qemu_mips_malta_defconfig
index 6b952de53e57d49d6a2dfe6d1f5f70fe8c518019..6e2c60133ba554526452d34940ccfb29c6b9c045 100644 (file)
--- a/configs/qemu_mips_malta_defconfig
+++ b/configs/qemu_mips_malta_defconfig
@@ -6,16 +6,16 @@ BR2_mips_32r2=y
 BR2_TARGET_ROOTFS_EXT2=y
 # BR2_TARGET_ROOTFS_TAR is not set
 
-# Lock to 3.11 headers to avoid breaking with newer kernels
+# Lock to 3.12 headers to avoid breaking with newer kernels
 BR2_KERNEL_HEADERS_VERSION=y
-BR2_DEFAULT_KERNEL_VERSION="3.11.4"
+BR2_DEFAULT_KERNEL_VERSION="3.12"
 
 # Kernel
 BR2_LINUX_KERNEL=y
 BR2_LINUX_KERNEL_CUSTOM_VERSION=y
-BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="3.11.4"
+BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="3.12"
 BR2_LINUX_KERNEL_USE_CUSTOM_CONFIG=y
-BR2_LINUX_KERNEL_CUSTOM_CONFIG_FILE="board/qemu/mips-malta/linux-3.11.config"
+BR2_LINUX_KERNEL_CUSTOM_CONFIG_FILE="board/qemu/mips-malta/linux-3.12.config"
 BR2_LINUX_KERNEL_VMLINUX=y
 
 # Serial port config

diff --git a/configs/qemu_mipsel_malta_defconfig b/configs/qemu_mipsel_malta_defconfig
index 0b9137a625f51c34338dee9eb1b7ec763c561b44..ff640a10c9a9a718e30cb1a17e154d69f9b8c2f4 100644 (file)
--- a/configs/qemu_mipsel_malta_defconfig
+++ b/configs/qemu_mipsel_malta_defconfig
@@ -6,16 +6,16 @@ BR2_mips_32r2=y
 BR2_TARGET_ROOTFS_EXT2=y
 # BR2_TARGET_ROOTFS_TAR is not set
 
-# Lock to 3.11 headers to avoid breaking with newer kernels
+# Lock to 3.12 headers to avoid breaking with newer kernels
 BR2_KERNEL_HEADERS_VERSION=y
-BR2_DEFAULT_KERNEL_VERSION="3.11.4"
+BR2_DEFAULT_KERNEL_VERSION="3.12"
 
 # Kernel
 BR2_LINUX_KERNEL=y
 BR2_LINUX_KERNEL_CUSTOM_VERSION=y
-BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="3.11.4"
+BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="3.12"
 BR2_LINUX_KERNEL_USE_CUSTOM_CONFIG=y
-BR2_LINUX_KERNEL_CUSTOM_CONFIG_FILE="board/qemu/mipsel-malta/linux-3.11.config"
+BR2_LINUX_KERNEL_CUSTOM_CONFIG_FILE="board/qemu/mipsel-malta/linux-3.12.config"
 BR2_LINUX_KERNEL_VMLINUX=y
 
 # Serial port config

diff --git a/configs/qemu_ppc_g3beige_defconfig b/configs/qemu_ppc_g3beige_defconfig
index 513c49e5e9db7c71b03bbfdf2ba0923d41f63e4e..bd0bc0307b4d5a4869181a9cdc18e3460bef85ae 100644 (file)
--- a/configs/qemu_ppc_g3beige_defconfig
+++ b/configs/qemu_ppc_g3beige_defconfig
@@ -6,16 +6,16 @@ BR2_powerpc_750=y
 BR2_TARGET_ROOTFS_EXT2=y
 # BR2_TARGET_ROOTFS_TAR is not set
 
-# Lock to 3.11 headers to avoid breaking with newer kernels
+# Lock to 3.12 headers to avoid breaking with newer kernels
 BR2_KERNEL_HEADERS_VERSION=y
-BR2_DEFAULT_KERNEL_VERSION="3.11.4"
+BR2_DEFAULT_KERNEL_VERSION="3.12"
 
 # Kernel
 BR2_LINUX_KERNEL=y
 BR2_LINUX_KERNEL_CUSTOM_VERSION=y
-BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="3.11.4"
+BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="3.12"
 BR2_LINUX_KERNEL_USE_CUSTOM_CONFIG=y
-BR2_LINUX_KERNEL_CUSTOM_CONFIG_FILE="board/qemu/powerpc-g3beige/linux-3.11.config"
+BR2_LINUX_KERNEL_CUSTOM_CONFIG_FILE="board/qemu/powerpc-g3beige/linux-3.12.config"
 BR2_LINUX_KERNEL_VMLINUX=y
 
 # Serial port config

diff --git a/configs/qemu_ppc_mpc8544ds_defconfig b/configs/qemu_ppc_mpc8544ds_defconfig
index 5396cfa7ef0565f6774e1c010ba3570beb083cda..687b53707bb6f24a594b178c0b7041d28638d41d 100644 (file)
--- a/configs/qemu_ppc_mpc8544ds_defconfig
+++ b/configs/qemu_ppc_mpc8544ds_defconfig
@@ -6,14 +6,14 @@ BR2_powerpc_8548=y
 # BR2_TARGET_ROOTFS_TAR is not set
 BR2_TARGET_ROOTFS_INITRAMFS=y
 
-# Lock to 3.11 headers to avoid breaking with newer kernels
+# Lock to 3.12 headers to avoid breaking with newer kernels
 BR2_KERNEL_HEADERS_VERSION=y
-BR2_DEFAULT_KERNEL_VERSION="3.11.4"
+BR2_DEFAULT_KERNEL_VERSION="3.12"
 
 # Kernel
 BR2_LINUX_KERNEL=y
 BR2_LINUX_KERNEL_CUSTOM_VERSION=y
-BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="3.11.4"
+BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="3.12"
 BR2_LINUX_KERNEL_DEFCONFIG="mpc85xx"
 BR2_LINUX_KERNEL_VMLINUX=y
 

diff --git a/configs/qemu_ppc_virtex_ml507_defconfig b/configs/qemu_ppc_virtex_ml507_defconfig
index 62dd741b7de33e36abc141ae8f62b86a99e81faa..a0dc674d7aef1fb6b1d716c002604d7f6b495f88 100644 (file)
--- a/configs/qemu_ppc_virtex_ml507_defconfig
+++ b/configs/qemu_ppc_virtex_ml507_defconfig
@@ -6,9 +6,9 @@ BR2_powerpc_440=y
 # BR2_TARGET_ROOTFS_TAR is not set
 BR2_TARGET_ROOTFS_INITRAMFS=y
 
-# Lock to 3.11 headers to avoid breaking with newer kernels
+# Lock to 3.12 headers to avoid breaking with newer kernels
 BR2_KERNEL_HEADERS_VERSION=y
-BR2_DEFAULT_KERNEL_VERSION="3.11.4"
+BR2_DEFAULT_KERNEL_VERSION="3.12"
 
 # Use soft float
 BR2_SOFT_FLOAT=y
@@ -16,7 +16,7 @@ BR2_SOFT_FLOAT=y
 # Kernel
 BR2_LINUX_KERNEL=y
 BR2_LINUX_KERNEL_CUSTOM_VERSION=y
-BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="3.11.4"
+BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="3.12"
 BR2_LINUX_KERNEL_DEFCONFIG="44x/virtex5"
 BR2_LINUX_KERNEL_VMLINUX=y
 BR2_LINUX_KERNEL_DTS_SUPPORT=y

diff --git a/configs/qemu_sh4_r2d_defconfig b/configs/qemu_sh4_r2d_defconfig
index 99743a10c98a635e834e432165529b6a3143513b..f7671d1679c1ba43dad2282d6e48e839881beab5 100644 (file)
--- a/configs/qemu_sh4_r2d_defconfig
+++ b/configs/qemu_sh4_r2d_defconfig
@@ -12,7 +12,7 @@ BR2_TARGET_ROOTFS_EXT2=y
 
 # Lock to 3.2 headers to avoid breaking with newer kernels
 BR2_KERNEL_HEADERS_VERSION=y
-BR2_DEFAULT_KERNEL_VERSION="3.2.51"
+BR2_DEFAULT_KERNEL_VERSION="3.2.52"
 
 # The kernel wants to use the -m4-nofpu option to make sure that it
 # doesn't use floating point operations.
@@ -21,7 +21,7 @@ BR2_EXTRA_GCC_CONFIG_OPTIONS="--with-multilib-list=m4,m4-nofpu"
 # Linux kernel
 BR2_LINUX_KERNEL=y
 BR2_LINUX_KERNEL_CUSTOM_VERSION=y
-BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="3.2.51"
+BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="3.2.52"
 BR2_LINUX_KERNEL_USE_CUSTOM_CONFIG=y
 BR2_LINUX_KERNEL_CUSTOM_CONFIG_FILE="board/qemu/sh4-r2d/linux-3.2.config"
 BR2_LINUX_KERNEL_ZIMAGE=y

diff --git a/configs/qemu_sparc_ss10_defconfig b/configs/qemu_sparc_ss10_defconfig
index 37c40c4538726e4f9df037692924e2b3e20b8859..67bffbdef656607b5205c02ba6520bd094b04754 100644 (file)
--- a/configs/qemu_sparc_ss10_defconfig
+++ b/configs/qemu_sparc_ss10_defconfig
@@ -6,13 +6,13 @@ BR2_sparc_v8=y
 BR2_TARGET_ROOTFS_EXT2=y
 # BR2_TARGET_ROOTFS_TAR is not set
 
-# Lock to 3.11 headers to avoid breaking with newer kernels
+# Lock to 3.12 headers to avoid breaking with newer kernels
 BR2_KERNEL_HEADERS_VERSION=y
-BR2_DEFAULT_KERNEL_VERSION="3.11.4"
+BR2_DEFAULT_KERNEL_VERSION="3.12"
 
 # Linux kernel
 BR2_LINUX_KERNEL=y
 BR2_LINUX_KERNEL_CUSTOM_VERSION=y
-BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="3.11.4"
+BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="3.12"
 BR2_LINUX_KERNEL_DEFCONFIG="sparc32"
 BR2_LINUX_KERNEL_ZIMAGE=y

diff --git a/configs/qemu_x86_64_defconfig b/configs/qemu_x86_64_defconfig
index 520fcf104cc86e438a148e2e35c8ea5c42d817cf..816cef1a9d109095756af8a6e387c3ac983e1e49 100644 (file)
--- a/configs/qemu_x86_64_defconfig
+++ b/configs/qemu_x86_64_defconfig
@@ -9,13 +9,13 @@ BR2_TARGET_GENERIC_GETTY_PORT="tty1"
 BR2_TARGET_ROOTFS_EXT2=y
 # BR2_TARGET_ROOTFS_TAR is not set
 
-# Lock to 3.11 headers to avoid breaking with newer kernels
+# Lock to 3.12 headers to avoid breaking with newer kernels
 BR2_KERNEL_HEADERS_VERSION=y
-BR2_DEFAULT_KERNEL_VERSION="3.11.4"
+BR2_DEFAULT_KERNEL_VERSION="3.12"
 
 # Kernel
 BR2_LINUX_KERNEL=y
 BR2_LINUX_KERNEL_CUSTOM_VERSION=y
-BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="3.11.4"
+BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="3.12"
 BR2_LINUX_KERNEL_USE_CUSTOM_CONFIG=y
-BR2_LINUX_KERNEL_CUSTOM_CONFIG_FILE="board/qemu/x86_64/linux-3.11.config"
+BR2_LINUX_KERNEL_CUSTOM_CONFIG_FILE="board/qemu/x86_64/linux-3.12.config"

diff --git a/configs/qemu_x86_defconfig b/configs/qemu_x86_defconfig
index 7609cde28e2d828da459a323b0ae031551bb34bc..ccccfa2981a12959386b7c2527ecbb76d36f9dbd 100644 (file)
--- a/configs/qemu_x86_defconfig
+++ b/configs/qemu_x86_defconfig
@@ -10,13 +10,13 @@ BR2_TARGET_GENERIC_GETTY_PORT="tty1"
 BR2_TARGET_ROOTFS_EXT2=y
 # BR2_TARGET_ROOTFS_TAR is not set
 
-# Lock to 3.11 headers to avoid breaking with newer kernels
+# Lock to 3.12 headers to avoid breaking with newer kernels
 BR2_KERNEL_HEADERS_VERSION=y
-BR2_DEFAULT_KERNEL_VERSION="3.11.4"
+BR2_DEFAULT_KERNEL_VERSION="3.12"
 
 # Kernel
 BR2_LINUX_KERNEL=y
 BR2_LINUX_KERNEL_CUSTOM_VERSION=y
-BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="3.11.4"
+BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="3.12"
 BR2_LINUX_KERNEL_USE_CUSTOM_CONFIG=y
-BR2_LINUX_KERNEL_CUSTOM_CONFIG_FILE="board/qemu/x86/linux-3.11.config"
+BR2_LINUX_KERNEL_CUSTOM_CONFIG_FILE="board/qemu/x86/linux-3.12.config"