gdb_test "tstop" ".*" ""
-#
-# 9.1 test the tdump command
-#
+gdb_tfind_test "9.1: init: make sure not debugging any trace frame" \
+ "none" "-1"
-set timeout 60
+# 9.3 help tdump
-gdb_tfind_test "9.1: init: make sure not debugging any trace frame" "none" "-1"
+gdb_test "help tdump" "Print everything collected at the current.*" \
+ "9.3: help tdump"
-gdb_tfind_test "9.1: find frame for TP $tdp1" "tracepoint $tdp1" \
+# Check the collected trace data from different sources, such as live
+# inferior and tfile.
+
+proc use_collected_data { data_source } { with_test_prefix "${data_source}" {
+ global tdp1 tdp2 tdp3 tdp4 tdp5 tdp6
+ global testline1 testline2 testline3 testline4 testline5 testline6
+ global pcreg fpreg spreg
+ global srcfile srcdir subdir
+ global arg1 arg3
+ global decimal hex gdb_prompt
+ #
+ # 9.1 test the tdump command
+ #
+
+ set timeout 60
+
+ gdb_tfind_test "9.1: find frame for TP $tdp1" "tracepoint $tdp1" \
"\$tracepoint" "$tdp1"
-# Nothing was collected at tdp1, so this tdump should be empty.
-gdb_test "tdump" \
+ # Nothing was collected at tdp1, so this tdump should be empty.
+ gdb_test "tdump" \
"Data collected at tracepoint $tdp1, trace frame $decimal:" \
"9.1: tdump, nothing collected"
-gdb_tfind_test "9.1: find frame for TP $tdp2" "tracepoint $tdp2" \
+ gdb_tfind_test "9.1: find frame for TP $tdp2" "tracepoint $tdp2" \
"\$tracepoint" "$tdp2"
-# regs were collected at tdp2.
-# How to match for the output of "info registers" on an unknown architecture?
-# For now, assume that most architectures have a register called "pc".
+ # regs were collected at tdp2.
+ # How to match for the output of "info registers" on an unknown architecture?
+ # For now, assume that most architectures have a register called "pc".
-gdb_test "tdump" \
- "\[\r\n\]$pcreg .*" \
- "9.1: tdump, regs collected"
+ gdb_test "tdump" \
+ "\[\r\n\]$pcreg .*" \
+ "9.1: tdump, regs collected"
-gdb_tfind_test "9.1: find frame for TP $tdp3" "tracepoint $tdp3" \
+ gdb_tfind_test "9.1: find frame for TP $tdp3" "tracepoint $tdp3" \
"\$tracepoint" "$tdp3"
-# args were collected at tdp3
-gdb_test "tdump" \
+ # args were collected at tdp3
+ gdb_test "tdump" \
"depth = 3.*q1 = 2.*q2 = 2.*q3 = 3.*q4 = 4.*q5 = 5.*q6 = 6" \
"9.1: tdump, args collected"
-gdb_tfind_test "9.1: find frame for TP $tdp4" "tracepoint $tdp4" \
+ gdb_tfind_test "9.1: find frame for TP $tdp4" "tracepoint $tdp4" \
"\$tracepoint" "$tdp4"
-# locals were collected at tdp4
-gdb_test "tdump" \
+ # locals were collected at tdp4
+ gdb_test "tdump" \
"q = 1" \
"9.1: tdump, locals collected"
-gdb_tfind_test "9.1: find frame for TP $tdp5" "tracepoint $tdp5" \
+ gdb_tfind_test "9.1: find frame for TP $tdp5" "tracepoint $tdp5" \
"\$tracepoint" "$tdp5"
-# stack was collected at tdp5, plus the frame pointer
-gdb_test "tdump" \
- ".$fpreg = .*$spreg @ 64 = .*" \
- "9.1: tdump, memrange collected"
+ # stack was collected at tdp5, plus the frame pointer
+ gdb_test "tdump" \
+ ".$fpreg = .*$spreg @ 64 = .*" \
+ "9.1: tdump, memrange collected"
-gdb_tfind_test "9.1: find frame for TP $tdp6" "tracepoint $tdp6" \
+ gdb_tfind_test "9.1: find frame for TP $tdp6" "tracepoint $tdp6" \
"\$tracepoint" "$tdp6"
-# globals were collected at tdp6
-gdb_test "tdump" \
+ # globals were collected at tdp6
+ gdb_test "tdump" \
"gdb_char_test = 1.*gdb_short_test = 2.*gdb_long_test = 3" \
"9.1: tdump, global variables collected"
-# 9.2 test tdump with arguments
-# [no go, tdump doesn't have any arguments]
+ # 9.2 test tdump with arguments
+ # [no go, tdump doesn't have any arguments]
-# 9.3 help tdump
+ set linecount1 0
+ set linecount2 0
+ set linecount3 0
+ set linecount4 0
+ set linecount5 0
+ set linecount6 0
-gdb_test "help tdump" "Print everything collected at the current.*" \
- "9.3: help tdump"
-
-set linecount1 0
-set linecount2 0
-set linecount3 0
-set linecount4 0
-set linecount5 0
-set linecount6 0
-
-gdb_tfind_test "11.x, 12.1: find start frame" "start" "0"
+ gdb_tfind_test "11.x, 12.1: find start frame" "start" "0"
-#
-# 11.x test built-in trace variables $trace_frame, $trace_line etc.
-#
+ #
+ # 11.x test built-in trace variables $trace_frame, $trace_line etc.
+ #
-gdb_test "printf \"x %d x\\n\", \$trace_frame" "x 0 x" \
+ gdb_test "printf \"x %d x\\n\", \$trace_frame" "x 0 x" \
"11.1: test \$trace_frame"
-gdb_test "printf \"x %d x\\n\", \$tracepoint" "x $tdp1 x" \
+ gdb_test "printf \"x %d x\\n\", \$tracepoint" "x $tdp1 x" \
"11.2: test \$tracepoint"
-gdb_test "printf \"x %d x\\n\", \$trace_line" "x $testline1 x" \
+ gdb_test "printf \"x %d x\\n\", \$trace_line" "x $testline1 x" \
"11.3: test \$trace_line"
-gdb_test_multiple "print \$trace_file" "11.4: test \$trace_file" {
- -re "\\$\[0-9\]+ = \"$srcfile\"\[\r\n\]+$gdb_prompt $" {
- pass "11.4: test \$trace_file"
- }
- -re "\\$\[0-9\]+ = \"$srcdir/$subdir/$srcfile\"\[\r\n\]+$gdb_prompt $" {
- pass "11.4: test \$trace_file"
+ gdb_test_multiple "print \$trace_file" "11.4: test \$trace_file" {
+ -re "\\$\[0-9\]+ = \"$srcfile\"\[\r\n\]+$gdb_prompt $" {
+ pass "11.4: test \$trace_file"
+ }
+ -re "\\$\[0-9\]+ = \"$srcdir/$subdir/$srcfile\"\[\r\n\]+$gdb_prompt $" {
+ pass "11.4: test \$trace_file"
+ }
}
-}
-#gdb_test "print \$trace_file" "\"$srcdir/$subdir/$srcfile\"" \
-# "11.4: test \$trace_file"
+ #gdb_test "print \$trace_file" "\"$srcdir/$subdir/$srcfile\"" \
+ # "11.4: test \$trace_file"
-#
-# 12.x test report generation using arbitrary GDB commands, loops etc.
-#
+ #
+ # 12.x test report generation using arbitrary GDB commands, loops etc.
+ #
-gdb_test_multiple "while \$trace_frame != -1\n output \$trace_file\n printf \", line \%d \(tracepoint #\%d\)\\n\", \$trace_line, \$tracepoint\n tfind\n end" "12.1: trace report #1" {
- -re "> end\r\n" {
- exp_continue
- }
- -re "^Found trace frame \[0-9\]+, tracepoint \[0-9\]+\r\n" {
- exp_continue
- }
- -re "^\[^\r\n\]* line $testline1 .tracepoint .$tdp1\\)\r\n" {
- set linecount1 [expr $linecount1 + 1]
- exp_continue
- }
- -re "^\[^\r\n\]* line $testline2 .tracepoint .$tdp2\\)\r\n" {
- set linecount2 [expr $linecount2 + 1]
- exp_continue
- }
- -re "^\[^\r\n\]* line $testline3 .tracepoint .$tdp3\\)\r\n" {
- set linecount3 [expr $linecount3 + 1]
- exp_continue
- }
- -re "^\[^\r\n\]* line $testline4 .tracepoint .$tdp4\\)\r\n" {
- set linecount4 [expr $linecount4 + 1]
- exp_continue
- }
- -re "^\[^\r\n\]* line $testline5 .tracepoint .$tdp5\\)\r\n" {
- set linecount5 [expr $linecount5 + 1]
- exp_continue
- }
- -re "^\[^\r\n\]* line $testline6 .tracepoint .$tdp6\\)\r\n" {
- set linecount6 [expr $linecount6 + 1]
- exp_continue
- }
- -re "^No trace frame found\r\n$gdb_prompt $" {
- if { ($linecount1 < 4) || ($linecount2 < 4) || ($linecount3 < 4) || ($linecount4 < 4) || ($linecount5 < 4) || ($linecount6 < 4) } {
- fail "12.1: trace report #1"
- } else {
- pass "12.1: trace report #1"
+ gdb_test_multiple "while \$trace_frame != -1\n output \$trace_file\n printf \", line \%d \(tracepoint #\%d\)\\n\", \$trace_line, \$tracepoint\n tfind\n end" "12.1: trace report #1" {
+ -re "> end\r\n" {
+ exp_continue
+ }
+ -re "^Found trace frame \[0-9\]+, tracepoint \[0-9\]+\r\n" {
+ exp_continue
+ }
+ -re "^\[^\r\n\]* line $testline1 .tracepoint .$tdp1\\)\r\n" {
+ set linecount1 [expr $linecount1 + 1]
+ exp_continue
+ }
+ -re "^\[^\r\n\]* line $testline2 .tracepoint .$tdp2\\)\r\n" {
+ set linecount2 [expr $linecount2 + 1]
+ exp_continue
+ }
+ -re "^\[^\r\n\]* line $testline3 .tracepoint .$tdp3\\)\r\n" {
+ set linecount3 [expr $linecount3 + 1]
+ exp_continue
+ }
+ -re "^\[^\r\n\]* line $testline4 .tracepoint .$tdp4\\)\r\n" {
+ set linecount4 [expr $linecount4 + 1]
+ exp_continue
+ }
+ -re "^\[^\r\n\]* line $testline5 .tracepoint .$tdp5\\)\r\n" {
+ set linecount5 [expr $linecount5 + 1]
+ exp_continue
+ }
+ -re "^\[^\r\n\]* line $testline6 .tracepoint .$tdp6\\)\r\n" {
+ set linecount6 [expr $linecount6 + 1]
+ exp_continue
+ }
+ -re "^No trace frame found\r\n$gdb_prompt $" {
+ if { ($linecount1 < 4) || ($linecount2 < 4) || ($linecount3 < 4) || ($linecount4 < 4) || ($linecount5 < 4) || ($linecount6 < 4) } {
+ fail "12.1: trace report #1"
+ } else {
+ pass "12.1: trace report #1"
+ }
}
}
-}
-gdb_tfind_test "12.2: tfind end, selects no frame" "end" "-1"
-gdb_tfind_test "12.2: find first TDP #2 frame" "tracepoint $tdp2" \
+ gdb_tfind_test "12.2: tfind end, selects no frame" "end" "-1"
+ gdb_tfind_test "12.2: find first TDP #2 frame" "tracepoint $tdp2" \
"\$tracepoint" "$tdp2"
-set linecount2 0
+ set linecount2 0
-gdb_test_multiple "while \$trace_frame != -1\n printf \"tracepoint #\%d, FP 0x\%08x, SP 0x\%08x, PC 0x%08x\\n\", \$tracepoint, \$fp, \$sp, \$pc\n tfind tracepoint\n end" "12.2: trace report #2" {
- -re "tracepoint #$tdp2, FP $hex, SP $hex, PC $hex" {
- set linecount2 [expr $linecount2 + 1]
- exp_continue
- }
- -re ".*$gdb_prompt $" {
- if { ($linecount2 < 4) } {
- fail "12.2: trace report #2"
- } else {
- pass "12.2: trace report #2"
+ gdb_test_multiple "while \$trace_frame != -1\n printf \"tracepoint #\%d, FP 0x\%08x, SP 0x\%08x, PC 0x%08x\\n\", \$tracepoint, \$fp, \$sp, \$pc\n tfind tracepoint\n end" "12.2: trace report #2" {
+ -re "tracepoint #$tdp2, FP $hex, SP $hex, PC $hex" {
+ set linecount2 [expr $linecount2 + 1]
+ exp_continue
+ }
+ -re ".*$gdb_prompt $" {
+ if { ($linecount2 < 4) } {
+ fail "12.2: trace report #2"
+ } else {
+ pass "12.2: trace report #2"
+ }
}
}
-}
-gdb_tfind_test "12.3: tfind end, selects no frame" "end" "-1"
-gdb_tfind_test "12.3: find first TDP #3 frame" "tracepoint $tdp3" \
+ gdb_tfind_test "12.3: tfind end, selects no frame" "end" "-1"
+ gdb_tfind_test "12.3: find first TDP #3 frame" "tracepoint $tdp3" \
"\$tracepoint" "$tdp3"
-set linecount3 0
+ set linecount3 0
-gdb_test_multiple "while \$trace_frame != -1\n printf \"TDP #\%d, frame \%d: depth = \%d, q1 = \%d\\n\", \$tracepoint, \$trace_frame, depth, q1\n tfind tracepoint\n end" "12.3: trace report #3" {
- -re "TDP #$tdp3, frame $decimal: depth = $decimal, q1 = $decimal" {
- set linecount3 [expr $linecount3 + 1]
- exp_continue
- }
- -re ".*$gdb_prompt $" {
- if { ($linecount3 < 4) } {
- fail "12.3: trace report #3"
- } else {
- pass "12.3: trace report #3"
+ gdb_test_multiple "while \$trace_frame != -1\n printf \"TDP #\%d, frame \%d: depth = \%d, q1 = \%d\\n\", \$tracepoint, \$trace_frame, depth, q1\n tfind tracepoint\n end" "12.3: trace report #3" {
+ -re "TDP #$tdp3, frame $decimal: depth = $decimal, q1 = $decimal" {
+ set linecount3 [expr $linecount3 + 1]
+ exp_continue
+ }
+ -re ".*$gdb_prompt $" {
+ if { ($linecount3 < 4) } {
+ fail "12.3: trace report #3"
+ } else {
+ pass "12.3: trace report #3"
+ }
}
}
-}
-gdb_tfind_test "12.4: tfind end, selects no frame" "end" "-1"
-gdb_tfind_test "12.4: find first TDP #6 frame" "tracepoint $tdp6" \
+ gdb_tfind_test "12.4: tfind end, selects no frame" "end" "-1"
+ gdb_tfind_test "12.4: find first TDP #6 frame" "tracepoint $tdp6" \
"\$tracepoint" "$tdp6"
-set linecount6 0
+ set linecount6 0
-gdb_test_multiple "while \$trace_frame != -1\n printf \"TDP #\%d, frame %d: char_test = \%d, long_test = \%d\\n\", \$tracepoint, \$trace_frame, gdb_char_test, gdb_long_test\n tfind tracepoint\n end" "12.4: trace report #4" {
- -re "TDP #$tdp6, frame $decimal: char_test = $arg1, long_test = $arg3" {
- set linecount6 [expr $linecount6 + 1]
- exp_continue
- }
- -re ".*$gdb_prompt $" {
- if { ($linecount6 < 4) } {
- fail "12.4: trace report #4"
- } else {
- pass "12.4: trace report #4"
+ gdb_test_multiple "while \$trace_frame != -1\n printf \"TDP #\%d, frame %d: char_test = \%d, long_test = \%d\\n\", \$tracepoint, \$trace_frame, gdb_char_test, gdb_long_test\n tfind tracepoint\n end" "12.4: trace report #4" {
+ -re "TDP #$tdp6, frame $decimal: char_test = $arg1, long_test = $arg3" {
+ set linecount6 [expr $linecount6 + 1]
+ exp_continue
+ }
+ -re ".*$gdb_prompt $" {
+ if { ($linecount6 < 4) } {
+ fail "12.4: trace report #4"
+ } else {
+ pass "12.4: trace report #4"
+ }
}
}
}
+}
+
+use_collected_data "live"
# Finished!
-gdb_tfind_test "finished: make sure not debugging any trace frame" "none" "-1"
+gdb_tfind_test "finished: make sure not debugging any trace frame" \
+ "none" "-1"
+
+# Save trace frames to tfile.
+gdb_test "tsave report.tf" "Trace data saved to file 'report.tf'.*"
+
+# Change target to tfile.
+set test "change to tfile target"
+gdb_test_multiple "target tfile report.tf" "$test" {
+ -re "A program is being debugged already. Kill it. .y or n. " {
+ send_gdb "y\n"
+ exp_continue
+ }
+ -re "$gdb_prompt $" {
+ pass "$test"
+ }
+}
+# Test the collected trace frames from tfile.
+use_collected_data "tfile"
projects / binutils-gdb.git / commitdiff