# Makefile for to build a gcc/uClibc toolchain
#
-# Copyright (C) 2002 Erik Andersen <andersen@uclibc.org>
+# Copyright (C) 2002
-2003 Erik Andersen <andersen@uclibc.org>
#
# This program is free software; you can redistribute it and/or modify
# it under the terms of the GNU General Public License as published by
# Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
ifeq ($(USE_UCLIBC_TOOLCHAIN),true)
-#############################################################
-#
-# EDIT this stuff to suit your system and source locations
-#
-#############################################################
-
-# C compiler for the build system
-HOSTCC:=gcc
#############################################################
#
#
#############################################################
GNU_TARGET_NAME:=$(ARCH)-linux
-MAKE:=make
+TARGET_LANGUAGES:=c,c++
+MAKE=make
#############################################################
#
#
#############################################################
BINUTILS_SITE:=ftp://ftp.gnu.org/gnu/binutils/
-BINUTILS_SOURCE:=binutils-2.12.1.tar.bz2
-BINUTILS_DIR:=$(BUILD_DIR)/binutils-2.12.1
-BINUTILS_DIR1:=$(BUILD_DIR)/binutils-build
+BINUTILS_SOURCE:=binutils-2.13.2.tar.bz2
+BINUTILS_DIR:=$(BUILD_DIR)/binutils-2.13.2
+#
+# Perhaps you would perfer to use the older 2.12.1 version?
+#BINUTILS_SITE:=ftp://ftp.gnu.org/gnu/binutils/
+#BINUTILS_SOURCE:=binutils-2.12.1.tar.bz2
+#BINUTILS_DIR:=$(BUILD_DIR)/binutils-2.12.1
ifeq ($(USE_UCLIBC_SNAPSHOT),true)
# Be aware that this changes daily....
endif
GCC_SITE:=ftp://ftp.gnu.org/gnu/gcc/
-GCC_SOURCE:=gcc-3.2.tar.gz
-GCC_DIR:=$(BUILD_DIR)/gcc-3.2
-GCC_BUILD_DIR1:=$(BUILD_DIR)/gcc-initial
-GCC_BUILD_DIR2:=$(BUILD_DIR)/gcc-final
+GCC_SOURCE:=gcc-3.2.1.tar.gz
+GCC_DIR:=$(BUILD_DIR)/gcc-3.2.1
# Setup some initial stuff
#
#############################################################
-uclibc_toolchain: uclibc gcc_final
+uclibc_toolchain: gcc_final
uclibc_toolchain-clean: gcc_final-clean uclibc-clean gcc_initial-clean binutils-clean
# build binutils
#
#############################################################
+BINUTILS_DIR1:=$(BUILD_DIR)/binutils-build
$(DL_DIR)/$(BINUTILS_SOURCE):
$(WGET) -P $(DL_DIR) $(BINUTILS_SITE)/$(BINUTILS_SOURCE)
touch $(BINUTILS_DIR)/.unpacked
$(BINUTILS_DIR)/.patched: $(BINUTILS_DIR)/.unpacked
- # Apply all binutils patches in the source directory, named binutils-*.patch
- for p in $(SOURCE_DIR)/binutils-*.patch ; do \
- cat $$p | patch -p1 -d $(BINUTILS_DIR) ; \
- done
- @if [ "`find $(BINUTILS_DIR) '(' -name '*.rej' -o -name '.*.rej' ')' -print`" ] ; then \
- echo "Aborting. Reject files found."; \
- exit 1; \
- fi
- @if `echo "true" | grep -r true`; then true; else \
- echo "ERROR! Your grep doesn't support the -r argument."; \
- exit 1; \
- fi
+ # Apply any files named binutils-*.patch from the source directory to binutils
+ $(SOURCE_DIR)/patch-kernel.sh $(BINUTILS_DIR) $(SOURCE_DIR) binutils-*.patch
+ #
+ # Enable combreloc, since it is such a nice thing to have...
+ #
+ -perl -i -p -e "s,link_info.combreloc = false,link_info.combreloc = true,g;" \
+ $(BINUTILS_DIR)/ld/ldmain.c
+ #
+ # Hack binutils to use the correct shared lib loader
+ #
(cd $(BINUTILS_DIR); perl -i -p -e "s,#.*define.*ELF_DYNAMIC_INTERPRETER.*\".*\"\
,#define ELF_DYNAMIC_INTERPRETER \"/lib/ld-uClibc.so.0\",;" \
`grep -lr "#.*define.*ELF_DYNAMIC_INTERPRETER.*\".*\"" $(BINUTILS_DIR)`);
$(BINUTILS_DIR1)/.configured: $(BINUTILS_DIR)/.patched
mkdir -p $(BINUTILS_DIR1)
- (cd $(BINUTILS_DIR1); CC=$(HOSTCC) $(BINUTILS_DIR)/configure --disable-shared \
+ (cd $(BINUTILS_DIR1); CC=$(HOSTCC) $(BINUTILS_DIR)/configure \
--target=$(GNU_TARGET_NAME) --prefix=$(STAGING_DIR) \
+ --exec-prefix=$(STAGING_DIR) --bindir=$(STAGING_DIR)/bin \
+ --sbindir=$(STAGING_DIR)/sbin --sysconfdir=$(STAGING_DIR)/etc \
+ --datadir=$(STAGING_DIR)/share --includedir=$(STAGING_DIR)/include \
+ --libdir=$(STAGING_DIR)/lib --localstatedir=$(STAGING_DIR)/var \
+ --mandir=$(STAGING_DIR)/man --infodir=$(STAGING_DIR)/info \
--enable-targets=$(GNU_TARGET_NAME) \
- --program-transform-name=s,^,$(ARCH)-uclibc-,);
+ --program-prefix=$(ARCH)-uclibc-);
touch $(BINUTILS_DIR1)/.configured
$(BINUTILS_DIR1)/binutils/objdump: $(BINUTILS_DIR1)/.configured
$(STAGING_DIR)/lib/libg.a:
$(STAGING_DIR)/$(GNU_TARGET_NAME)/bin/ar rv $(STAGING_DIR)/lib/libg.a;
-binutils: linux_headers $(STAGING_DIR)/$(GNU_TARGET_NAME)/bin/ld $(STAGING_DIR)/lib/libg.a
+binutils: $(STAGING_DIR)/$(GNU_TARGET_NAME)/bin/ld $(STAGING_DIR)/lib/libg.a
binutils-clean:
rm -f $(STAGING_DIR)/bin/$(GNU_TARGET_NAME)*
# Next build first pass gcc compiler
#
#############################################################
+GCC_BUILD_DIR1:=$(BUILD_DIR)/gcc-initial
$(DL_DIR)/$(GCC_SOURCE):
$(WGET) -P $(DL_DIR) $(GCC_SITE)/$(GCC_SOURCE)
touch $(GCC_DIR)/.unpacked
$(GCC_DIR)/.patched: $(GCC_DIR)/.unpacked
- # Apply all gcc patches in the source directory, named gcc-*.patch
- for p in $(SOURCE_DIR)/gcc-*.patch ; do \
- cat $$p | patch -p1 -d $(GCC_DIR) ; \
- done
- @if [ "`find $(GCC_DIR) '(' -name '*.rej' -o -name '.*.rej' ')' -print`" ] ; then \
- echo "Aborting. Reject files found."; \
- exit 1; \
- fi
+ # Apply any files named gcc-*.patch from the source directory to gcc
+ $(SOURCE_DIR)/patch-kernel.sh $(GCC_DIR) $(SOURCE_DIR) gcc-*.patch
touch $(GCC_DIR)/.patched
+# The --without-headers option stopped working with gcc 3.0 and has never been
+# # fixed, so we need to actually have working C library header files prior to
+# # the step or libgcc will not build...
$(GCC_BUILD_DIR1)/.configured: $(GCC_DIR)/.patched
mkdir -p $(GCC_BUILD_DIR1)
- (cd $(GCC_BUILD_DIR1); PATH=$$PATH:$(STAGING_DIR)/bin AR=$(ARCH)-uclibc-ar \
+ (cd $(GCC_BUILD_DIR1); PATH=$(STAGING_DIR)/bin:$$PATH AR=$(ARCH)-uclibc-ar \
RANLIB=$(ARCH)-uclibc-ranlib CC=$(HOSTCC) $(GCC_DIR)/configure \
--target=$(GNU_TARGET_NAME) --prefix=$(STAGING_DIR) \
+ --exec-prefix=$(STAGING_DIR) --bindir=$(STAGING_DIR)/bin \
+ --sbindir=$(STAGING_DIR)/sbin --sysconfdir=$(STAGING_DIR)/etc \
+ --datadir=$(STAGING_DIR)/share --includedir=$(STAGING_DIR)/include \
+ --libdir=$(STAGING_DIR)/lib --localstatedir=$(STAGING_DIR)/var \
+ --mandir=$(STAGING_DIR)/man --infodir=$(STAGING_DIR)/info \
--enable-target-optspace --disable-nls --with-gnu-ld \
- --disable-shared --enable-languages=c \
- --program-transform-name='s/^$(GNU_TARGET_NAME)-/$(ARCH)-uclibc-/');
+ --disable-shared --enable-languages=c --disable-__cxa_atexit \
+ --program-prefix=$(ARCH)-uclibc-);
-perl -i -p -e "s,ac_cv_prog_cc_cross=no,ac_cv_prog_cc_cross=yes,g;" $(GCC_BUILD_DIR1)/config.cache
touch $(GCC_BUILD_DIR1)/.configured
$(GCC_BUILD_DIR1)/.compiled: $(GCC_BUILD_DIR1)/.configured
- PATH=$$PATH:$(STAGING_DIR)/bin $(MAKE) -C $(GCC_BUILD_DIR1);
+ PATH=$(STAGING_DIR)/bin:$$PATH $(MAKE) -C $(GCC_BUILD_DIR1) \
+ AR_FOR_TARGET=$(STAGING_DIR)/bin/$(ARCH)-uclibc-ar \
+ RANLIB_FOR_TARGET=$(STAGING_DIR)/bin/$(ARCH)-uclibc-ranlib
touch $(GCC_BUILD_DIR1)/.compiled
$(GCC_BUILD_DIR1)/.installed: $(GCC_BUILD_DIR1)/.compiled
- PATH=$$PATH:$(STAGING_DIR)/bin $(MAKE) -C $(GCC_BUILD_DIR1) install;
- #Cleanup then mess when --program-transform-name mysteriously fails
+ PATH=$(STAGING_DIR)/bin:$$PATH $(MAKE) -C $(GCC_BUILD_DIR1) install;
+ #Cleanup then mess when --program-prefix mysteriously fails
-mv $(STAGING_DIR)/bin/$(GNU_TARGET_NAME)-cpp $(STAGING_DIR)/bin/$(ARCH)-uclibc-cpp
-mv $(STAGING_DIR)/bin/$(GNU_TARGET_NAME)-gcc $(STAGING_DIR)/bin/$(ARCH)-uclibc-gcc
rm -f $(STAGING_DIR)/bin/gccbug $(STAGING_DIR)/bin/gcov
#############################################################
#
-# uClibc is built in two stages. First, we hack the uClibc
-# include files and such in preparation for a gcc build. Later
-# when gcc for the target arch has been compiled, we can then
-# actually compile uClibc for the target...
+# uClibc is built in two stages. First, we install the uClibc
+# include files so that gcc can be built. Later when gcc for
+# the target arch has been compiled, we can actually compile
+# uClibc for the target...
#
#############################################################
$(DL_DIR)/$(UCLIBC_SOURCE):
bzcat $(DL_DIR)/$(UCLIBC_SOURCE) | tar -C $(BUILD_DIR) -xvf -
touch $(UCLIBC_DIR)/.unpacked
-$(UCLIBC_DIR)/.configured: $(UCLIBC_DIR)/.unpacked
- perl -i -p -e 's,^CROSS=.*,TARGET_ARCH=$(ARCH)\nCROSS=$(TARGET_CROSS),g' $(UCLIBC_DIR)/Rules.mak
+$(UCLIBC_DIR)/.configured: $(UCLIBC_DIR)/.unpacked linux_headers
+ perl -i -p -e 's,^CROSS=.*,TARGET_ARCH=$(ARCH)\nCROSS=$(TARGET_CROSS),g' \
+ $(UCLIBC_DIR)/Rules.mak
cp $(SOURCE_DIR)/uClibc.config $(UCLIBC_DIR)/.config
- perl -i -p -e 's,^KERNEL_SOURCE=.*,KERNEL_SOURCE=\"$(LINUX_DIR)\",g' $(UCLIBC_DIR)/.config
- perl -i -p -e 's,^DEVEL_PREFIX=.*,DEVEL_PREFIX=\"$(STAGING_DIR)\",g' $(UCLIBC_DIR)/.config
- perl -i -p -e 's,^SYSTEM_DEVEL_PREFIX=.*,SYSTEM_DEVEL_PREFIX=\"$(STAGING_DIR)\",g' $(UCLIBC_DIR)/.config
- perl -i -p -e 's,^DEVEL_TOOL_PREFIX=.*,DEVEL_TOOL_PREFIX=\"$(STAGING_DIR)/usr\",g' $(UCLIBC_DIR)/.config
- perl -i -p -e 's,^SHARED_LIB_LOADER_PATH=.*,SHARED_LIB_LOADER_PATH=\"/lib\",g' $(UCLIBC_DIR)/.config
- perl -i -p -e 's,^GCC_BIN=.*,GCC_BIN=$(STAGING_DIR)/bin/$(ARCH)-uclibc-gcc,g' $(UCLIBC_DIR)/extra/gcc-uClibc/Makefile
- perl -i -p -e 's,^LD_BIN=.*,LD_BIN=$(STAGING_DIR)/bin/$(ARCH)-uclibc-ld,g' $(UCLIBC_DIR)/extra/gcc-uClibc/Makefile
+ perl -i -p -e 's,^KERNEL_SOURCE=.*,KERNEL_SOURCE=\"$(LINUX_DIR)\",g' \
+ $(UCLIBC_DIR)/.config
+ perl -i -p -e 's,^DEVEL_PREFIX=.*,DEVEL_PREFIX=\"$(STAGING_DIR)\",g' \
+ $(UCLIBC_DIR)/.config
+ perl -i -p -e 's,^SYSTEM_DEVEL_PREFIX=.*,SYSTEM_DEVEL_PREFIX=\"$(STAGING_DIR)\",g' \
+ $(UCLIBC_DIR)/.config
+ perl -i -p -e 's,^DEVEL_TOOL_PREFIX=.*,DEVEL_TOOL_PREFIX=\"$(STAGING_DIR)/usr\",g' \
+ $(UCLIBC_DIR)/.config
+ perl -i -p -e 's,^SHARED_LIB_LOADER_PATH=.*,SHARED_LIB_LOADER_PATH=\"/lib\",g' \
+ $(UCLIBC_DIR)/.config
+ perl -i -p -e 's,.*UCLIBC_HAS_WCHAR.*,UCLIBC_HAS_WCHAR=y\nUCLIBC_HAS_LOCALE=n,g' \
+ $(UCLIBC_DIR)/.config
+ perl -i -p -e 's,^GCC_BIN.*,GCC_BIN=$(STAGING_DIR)/bin/$(ARCH)-uclibc-gcc,g' \
+ $(UCLIBC_DIR)/extra/gcc-uClibc/Makefile
+ perl -i -p -e 's,^LD_BIN.*,LD_BIN=$(STAGING_DIR)/bin/$(ARCH)-uclibc-ld,g' \
+ $(UCLIBC_DIR)/extra/gcc-uClibc/Makefile
$(MAKE) -C $(UCLIBC_DIR) oldconfig
- # Note that since the target compiler does not yet exist, we will not
- # be able to properly generate include/bits/syscall.h so we will need
- # to run part again later...
$(MAKE) -C $(UCLIBC_DIR) headers install_dev;
touch $(UCLIBC_DIR)/.configured
-# Now that we have a working target compiler, rebuild the header files for the
-# target so things like include/bits/syscall.h can actually be built this time
-# around...
-$(UCLIBC_DIR)/.config_final: $(UCLIBC_DIR)/.configured
- $(MAKE) -C $(UCLIBC_DIR) headers install_dev;
- touch $(UCLIBC_DIR)/.config_final
-
-$(UCLIBC_DIR)/lib/libc.a: $(UCLIBC_DIR)/.config_final
+$(UCLIBC_DIR)/lib/libc.a: $(UCLIBC_DIR)/.configured
$(MAKE) -C $(UCLIBC_DIR)
$(STAGING_DIR)/lib/libc.a: $(UCLIBC_DIR)/lib/libc.a
- $(MAKE) -C $(UCLIBC_DIR) install_dev install_runtime
+ $(MAKE) -C $(UCLIBC_DIR) install_dev install_runtime install_utils
+ifneq ($(TARGET_DIR),)
$(TARGET_DIR)/lib/libc.so.0: $(STAGING_DIR)/lib/libc.a
$(MAKE) -C $(UCLIBC_DIR) DEVEL_PREFIX=$(TARGET_DIR) \
SYSTEM_DEVEL_PREFIX=$(TARGET_DIR) \
- DEVEL_TOOL_PREFIX=$(TARGET_DIR)/usr \
- install_runtime
+ DEVEL_TOOL_PREFIX=$(TARGET_DIR)/usr install_runtime
$(TARGET_DIR)/usr/bin/ldd: $(TARGET_DIR)/lib/libc.so.0
$(MAKE) -C $(UCLIBC_DIR) PREFIX=$(TARGET_DIR) install_target_utils
-uclibc: gcc_initial $(STAGING_DIR)/lib/libc.a $(TARGET_DIR)/lib/libc.so.0 $(TARGET_DIR)/usr/bin/ldd
+UCLIBC_TARGETS=$(TARGET_DIR)/lib/libc.so.0 $(TARGET_DIR)/usr/bin/ldd
+endif
+
+uclibc: gcc_initial $(STAGING_DIR)/lib/libc.a $(UCLIBC_TARGETS)
uclibc-clean:
-$(MAKE) -C $(UCLIBC_DIR) clean
# the newly built shared uClibc library.
#
#############################################################
+GCC_BUILD_DIR2:=$(BUILD_DIR)/gcc-final
$(GCC_DIR)/.ldso_hacks: $(GCC_DIR)/.patched
+ #
# Hack things to use the correct shared lib loader
- (cd $(GCC_DIR); set -e; export LIST=`grep -lr -- "-dynamic-linker.*ld-linux.so.[0-9]" *`;\
+ #
+ (cd $(GCC_DIR); set -e; export LIST=`grep -lr -- "-dynamic-linker.*\.so[\.0-9]*" *`;\
if [ -n "$$LIST" ] ; then \
- perl -i -p -e "s,-dynamic-linker.*ld-linux.so.*[0-9]},\
+ perl -i -p -e "s,-dynamic-linker.*\.so[\.0-9]*},\
-dynamic-linker /lib/ld-uClibc.so.0},;" $$LIST; fi);
- (cd $(GCC_DIR); set -e; export LIST=`grep -lr ":gcrt1.o%s}" *`; \
- if [ -n "$$LIST" ] ; then \
- perl -i -p -e "s,:gcrt1.o%s},:crt0.o%s},g;" \
- $$LIST; fi);
- (cd $(GCC_DIR); set -e; export LIST=`grep -lr ":crt1.o%s}" *`; \
- if [ -n "$$LIST" ] ; then \
- perl -i -p -e "s,:crt1.o%s},:crt0.o%s},g;" \
- $$LIST; fi);
- # Fixup where gcc looks for start files to prevent glibc stuff leaking in...
+ #
+ # Prevent glibc start files from ever leaking in uninvited...
+ #
perl -i -p -e "s,standard_startfile_prefix_1 = \".*,standard_startfile_prefix_1=\
\"$(STAGING_DIR)/lib/\";,;" $(GCC_DIR)/gcc/gcc.c;
perl -i -p -e "s,standard_startfile_prefix_2 = \".*,standard_startfile_prefix_2=\
\"$(STAGING_DIR)/usr/lib/\";,;" $(GCC_DIR)/gcc/gcc.c;
- # Use atexit() directly, rather than cxa_atexit
- perl -i -p -e "s,int flag_use_cxa_atexit = 1;,int flag_use_cxa_atexit = 0;,g;"\
- $(GCC_DIR)/gcc/cp/decl2.c;
- # Fix up a lame quirk...
- perl -i -p -e "s,defined.*_GLIBCPP_USE_C99.*,1,g;" $(GCC_DIR)/libstdc++-v3/config/locale/generic/c_locale.cc;
+ #
# Hack up the soname for libstdc++
+ #
perl -i -p -e "s,\.so\.1,.so.0.9.9,g;" $(GCC_DIR)/gcc/config/t-slibgcc-elf-ver;
perl -i -p -e "s,-version-info.*[0-9]:[0-9]:[0-9],-version-info 9:9:0,g;" \
$(GCC_DIR)/libstdc++-v3/src/Makefile.am $(GCC_DIR)/libstdc++-v3/src/Makefile.in;
perl -i -p -e "s,3\.0\.0,9.9.0,g;" $(GCC_DIR)/libstdc++-v3/acinclude.m4 \
$(GCC_DIR)/libstdc++-v3/aclocal.m4 $(GCC_DIR)/libstdc++-v3/configure;
- # For now, we don't support locale-ified ctype, so bypass that problem here
+ #
+ # For now, we don't support locale-ified ctype (we will soon),
+ # so bypass that problem for now...
+ #
+ perl -i -p -e "s,defined.*_GLIBCPP_USE_C99.*,1,g;" \
+ $(GCC_DIR)/libstdc++-v3/config/locale/generic/c_locale.cc;
cp $(GCC_DIR)/libstdc++-v3/config/os/generic/bits/ctype_base.h \
$(GCC_DIR)/libstdc++-v3/config/os/gnu-linux/bits/
cp $(GCC_DIR)/libstdc++-v3/config/os/generic/bits/ctype_inline.h \
$(GCC_DIR)/libstdc++-v3/config/os/gnu-linux/bits/
cp $(GCC_DIR)/libstdc++-v3/config/os/generic/bits/ctype_noninline.h \
$(GCC_DIR)/libstdc++-v3/config/os/gnu-linux/bits/
+ #
# Prevent gcc from using the unwind-dw2-fde-glibc code
- perl -i -p -e "s,^#ifndef inhibit_libc,#define inhibit_libc\n#ifndef inhibit_libc,g;" \
- $(GCC_DIR)/gcc/unwind-dw2-fde-glibc.c;
+ #
+ perl -i -p -e "s,^#ifndef inhibit_libc,#define inhibit_libc\n\
+ #ifndef inhibit_libc,g;" $(GCC_DIR)/gcc/unwind-dw2-fde-glibc.c;
touch $(GCC_DIR)/.ldso_hacks
$(GCC_BUILD_DIR2)/.configured: $(GCC_DIR)/.ldso_hacks
mkdir -p $(GCC_BUILD_DIR2)
- (cd $(GCC_BUILD_DIR2); PATH=$$PATH:$(STAGING_DIR)/bin AR=$(ARCH)-uclibc-ar \
+ (cd $(GCC_BUILD_DIR2); PATH=$(STAGING_DIR)/bin:$$PATH AR=$(ARCH)-uclibc-ar \
RANLIB=$(ARCH)-uclibc-ranlib CC=$(HOSTCC) $(GCC_DIR)/configure \
--target=$(GNU_TARGET_NAME) --prefix=$(STAGING_DIR) \
+ --exec-prefix=$(STAGING_DIR) --bindir=$(STAGING_DIR)/bin \
+ --sbindir=$(STAGING_DIR)/sbin --sysconfdir=$(STAGING_DIR)/etc \
+ --datadir=$(STAGING_DIR)/share --includedir=$(STAGING_DIR)/include \
+ --libdir=$(STAGING_DIR)/lib --localstatedir=$(STAGING_DIR)/var \
+ --mandir=$(STAGING_DIR)/man --infodir=$(STAGING_DIR)/info \
--enable-target-optspace --disable-nls --with-gnu-ld \
- --disable-shared --enable-languages=c,c++ \
- --program-transform-name='s/^$(GNU_TARGET_NAME)-/$(ARCH)-uclibc-/');
+ --disable-shared --enable-languages=$(TARGET_LANGUAGES) --disable-__cxa_atexit \
+ --program-prefix=$(ARCH)-uclibc-);
perl -i -p -e "s,ac_cv_prog_cc_cross=no,ac_cv_prog_cc_cross=yes,g;" $(GCC_BUILD_DIR2)/config.cache
touch $(GCC_BUILD_DIR2)/.configured
$(GCC_BUILD_DIR2)/.compiled: $(GCC_BUILD_DIR2)/.configured
- PATH=$$PATH:$(STAGING_DIR)/bin $(MAKE) -C $(GCC_BUILD_DIR2)
+ PATH=$(STAGING_DIR)/bin:$$PATH $(MAKE) -C $(GCC_BUILD_DIR2) \
+ AR_FOR_TARGET=$(STAGING_DIR)/bin/$(ARCH)-uclibc-ar \
+ RANLIB_FOR_TARGET=$(STAGING_DIR)/bin/$(ARCH)-uclibc-ranlib
touch $(GCC_BUILD_DIR2)/.compiled
$(GCC_BUILD_DIR2)/.installed: $(GCC_BUILD_DIR2)/.compiled
- PATH=$$PATH:$(STAGING_DIR)/bin $(MAKE) -C $(GCC_BUILD_DIR2) install;
+ PATH=$(STAGING_DIR)/bin:$$PATH $(MAKE) -C $(GCC_BUILD_DIR2) install;
touch $(GCC_BUILD_DIR2)/.installed
-#Cleanup then mess when --program-transform-name mysteriously fails
+#Cleanup then mess when --program-prefix mysteriously fails
$(GCC_BUILD_DIR2)/.fixedup: $(GCC_BUILD_DIR2)/.installed
-mv $(STAGING_DIR)/bin/gcc $(STAGING_DIR)/$(GNU_TARGET_NAME)/bin;
-mv $(STAGING_DIR)/bin/protoize $(STAGING_DIR)/$(GNU_TARGET_NAME)/bin;
touch $(BUILD_DIR)/.shuffled
$(BUILD_DIR)/.stripped: $(BUILD_DIR)/.shuffled
- -$(STRIP) $(STAGING_DIR)/bin/*
- -$(TARGET_CROSS)strip --strip-unneeded \
+ -strip --strip-all -R .note -R .comment $(STAGING_DIR)/bin/*
+ -$(STAGING_DIR)/bin/$(ARCH)-uclibc-strip --strip-unneeded \
-R .note -R .comment $(STAGING_DIR)/lib/*.so*;
touch $(BUILD_DIR)/.stripped
-#gcc_final: $(BUILD_DIR)/.stripped
-gcc_final: $(BUILD_DIR)/.shuffled
+gcc_final: uclibc $(BUILD_DIR)/.stripped
gcc_final-clean:
rm -rf $(GCC_BUILD_DIR2)
# Packup the toolchain binaries
#
#############################################################
-$(GNU_TARGET_NAME)-toolchain.tar.bz2:
- rm -f $(GNU_TARGET_NAME)-toolchain.tar.bz2
- tar -cf $(GNU_TARGET_NAME)-toolchain.tar $(STAGING_DIR)
- bzip2 -9 $(GNU_TARGET_NAME)-toolchain.tar
+$(ARCH)-uclibc-toolchain.tar.bz2: gcc_final
+ rm -f $(ARCH)-uclibc-toolchain.tar.bz2
+ tar -cf $(ARCH)-uclibc-toolchain.tar $(STAGING_DIR)
+ bzip2 -9 $(ARCH)-uclibc-toolchain.tar
-tarball: $(GNU_TARGET_NAME)-toolchain.tar.bz2
+tarball: $(ARCH)-uclibc-toolchain.tar.bz2
endif
projects / buildroot.git / commitdiff