YOSYS_NAMESPACE_BEGIN
-AigerReader::AigerReader(RTLIL::Design *design, std::istream &f, RTLIL::IdString module_name, RTLIL::IdString clk_name)
- : design(design), f(f), clk_name(clk_name)
+AigerReader::AigerReader(RTLIL::Design *design, std::istream &f, RTLIL::IdString module_name, RTLIL::IdString clk_name, std::string map_filename, bool wideports)
- : design(design), f(f), clk_name(clk_name), map_filename(map_filename), wideports(wideports)
++ : design(design), f(f), clk_name(clk_name), map_filename(map_filename), wideports(wideports)
{
- module = new RTLIL::Module;
- module->name = module_name;
- if (design->module(module->name))
- log_error("Duplicate definition of module %s!\n", log_id(module->name));
+ module = new RTLIL::Module;
+ module->name = module_name;
+ if (design->module(module->name))
+ log_error("Duplicate definition of module %s!\n", log_id(module->name));
}
void AigerReader::parse_aiger()
{
- std::string header;
- f >> header;
- if (header != "aag" && header != "aig")
- log_error("Unsupported AIGER file!\n");
-
- // Parse rest of header
- if (!(f >> M >> I >> L >> O >> A))
- log_error("Invalid AIGER header\n");
-
- // Optional values
- B = C = J = F = 0;
- if (f.peek() != ' ') goto end_of_header;
- if (!(f >> B)) log_error("Invalid AIGER header\n");
- if (f.peek() != ' ') goto end_of_header;
- if (!(f >> C)) log_error("Invalid AIGER header\n");
- if (f.peek() != ' ') goto end_of_header;
- if (!(f >> J)) log_error("Invalid AIGER header\n");
- if (f.peek() != ' ') goto end_of_header;
- if (!(f >> F)) log_error("Invalid AIGER header\n");
+ std::string header;
+ f >> header;
+ if (header != "aag" && header != "aig")
+ log_error("Unsupported AIGER file!\n");
+
+ // Parse rest of header
+ if (!(f >> M >> I >> L >> O >> A))
+ log_error("Invalid AIGER header\n");
+
+ // Optional values
+ B = C = J = F = 0;
+ if (f.peek() != ' ') goto end_of_header;
+ if (!(f >> B)) log_error("Invalid AIGER header\n");
+ if (f.peek() != ' ') goto end_of_header;
+ if (!(f >> C)) log_error("Invalid AIGER header\n");
+ if (f.peek() != ' ') goto end_of_header;
+ if (!(f >> J)) log_error("Invalid AIGER header\n");
+ if (f.peek() != ' ') goto end_of_header;
+ if (!(f >> F)) log_error("Invalid AIGER header\n");
end_of_header:
- std::string line;
- std::getline(f, line); // Ignore up to start of next line, as standard
- // says anything that follows could be used for
- // optional sections
-
- log_debug("M=%u I=%u L=%u O=%u A=%u B=%u C=%u J=%u F=%u\n", M, I, L, O, A, B, C, J, F);
-
- line_count = 1;
- piNum = 0;
- flopNum = 0;
-
- if (header == "aag")
- parse_aiger_ascii();
- else if (header == "aig")
- parse_aiger_binary();
- else
- log_abort();
-
- // Parse footer (symbol table, comments, etc.)
- unsigned l1;
- std::string s;
- for (int c = f.peek(); c != EOF; c = f.peek(), ++line_count) {
- if (c == 'i' || c == 'l' || c == 'o') {
- f.ignore(1);
- if (!(f >> l1 >> s))
- log_error("Line %u cannot be interpreted as a symbol entry!\n", line_count);
-
- if ((c == 'i' && l1 > inputs.size()) || (c == 'l' && l1 > latches.size()) || (c == 'o' && l1 > outputs.size()))
- log_error("Line %u has invalid symbol position!\n", line_count);
-
- RTLIL::Wire* wire;
- if (c == 'i') wire = inputs[l1];
- else if (c == 'l') wire = latches[l1];
- else if (c == 'o') wire = outputs[l1];
- else log_abort();
-
- module->rename(wire, stringf("\\%s", s.c_str()));
- }
- else if (c == 'b' || c == 'j' || c == 'f') {
- // TODO
- }
- else if (c == 'c') {
- f.ignore(1);
- if (f.peek() == '\n')
- break;
- // Else constraint (TODO)
- }
- else
- log_error("Line %u: cannot interpret first character '%c'!\n", line_count, c);
- std::getline(f, line); // Ignore up to start of next line
- }
-
- post_process();
+ std::string line;
+ std::getline(f, line); // Ignore up to start of next line, as standard
+ // says anything that follows could be used for
+ // optional sections
+
+ log_debug("M=%u I=%u L=%u O=%u A=%u B=%u C=%u J=%u F=%u\n", M, I, L, O, A, B, C, J, F);
+
+ line_count = 1;
++ piNum = 0;
++ flopNum = 0;
+
+ if (header == "aag")
+ parse_aiger_ascii();
+ else if (header == "aig")
+ parse_aiger_binary();
+ else
+ log_abort();
+
+ RTLIL::Wire* n0 = module->wire("\\n0");
+ if (n0)
+ module->connect(n0, RTLIL::S0);
+
+ for (unsigned i = 0; i < outputs.size(); ++i) {
+ RTLIL::Wire *wire = outputs[i];
+ if (wire->port_input) {
+ RTLIL::Wire *o_wire = module->addWire(wire->name.str() + "_o");
+ o_wire->port_output = true;
+ wire->port_output = false;
+ module->connect(o_wire, wire);
+ outputs[i] = o_wire;
+ }
+ }
+
+ // Parse footer (symbol table, comments, etc.)
+ unsigned l1;
+ std::string s;
+ for (int c = f.peek(); c != EOF; c = f.peek(), ++line_count) {
+ if (c == 'i' || c == 'l' || c == 'o' || c == 'b') {
+ f.ignore(1);
+ if (!(f >> l1 >> s))
+ log_error("Line %u cannot be interpreted as a symbol entry!\n", line_count);
+
+ if ((c == 'i' && l1 > inputs.size()) || (c == 'l' && l1 > latches.size()) || (c == 'o' && l1 > outputs.size()))
+ log_error("Line %u has invalid symbol position!\n", line_count);
+
+ RTLIL::Wire* wire;
+ if (c == 'i') wire = inputs[l1];
+ else if (c == 'l') wire = latches[l1];
+ else if (c == 'o') wire = outputs[l1];
+ else if (c == 'b') wire = bad_properties[l1];
+ else log_abort();
+
+ module->rename(wire, stringf("\\%s", s.c_str()));
+ }
+ else if (c == 'j' || c == 'f') {
+ // TODO
+ }
+ else if (c == 'c') {
+ f.ignore(1);
+ if (f.peek() == '\n')
+ break;
+ // Else constraint (TODO)
+ }
+ else
+ log_error("Line %u: cannot interpret first character '%c'!\n", line_count, c);
+ std::getline(f, line); // Ignore up to start of next line
+ }
+
- module->fixup_ports();
- design->add(module);
++ post_process();
+}
+
+static uint32_t parse_xaiger_literal(std::istream &f)
+{
- uint32_t l;
- f.read(reinterpret_cast<char*>(&l), sizeof(l));
- if (f.gcount() != sizeof(l))
- log_error("Offset %ld: unable to read literal!\n", static_cast<int64_t>(f.tellg()));
- // TODO: Don't assume we're on little endian
++ uint32_t l;
++ f.read(reinterpret_cast<char*>(&l), sizeof(l));
++ if (f.gcount() != sizeof(l))
++ log_error("Offset %ld: unable to read literal!\n", static_cast<int64_t>(f.tellg()));
++ // TODO: Don't assume we're on little endian
+#ifdef _WIN32
- return _byteswap_ulong(l);
++ return _byteswap_ulong(l);
+#else
- return __builtin_bswap32(l);
++ return __builtin_bswap32(l);
+#endif
}
static RTLIL::Wire* createWireIfNotExists(RTLIL::Module *module, unsigned literal)
{
- const unsigned variable = literal >> 1;
- const bool invert = literal & 1;
- RTLIL::IdString wire_name(stringf("\\__%d%s__", variable, invert ? "b" : "")); // FIXME: is "b" the right suffix?
- RTLIL::Wire *wire = module->wire(wire_name);
- if (wire) return wire;
- log_debug("Creating %s\n", wire_name.c_str());
- wire = module->addWire(wire_name);
- wire->port_input = wire->port_output = false;
- if (!invert) return wire;
- RTLIL::IdString wire_inv_name(stringf("\\__%d__", variable));
- RTLIL::Wire *wire_inv = module->wire(wire_inv_name);
- if (wire_inv) {
- if (module->cell(wire_inv_name)) return wire;
- }
- else {
- log_debug("Creating %s\n", wire_inv_name.c_str());
- wire_inv = module->addWire(wire_inv_name);
- wire_inv->port_input = wire_inv->port_output = false;
- }
-
- log_debug("Creating %s = ~%s\n", wire_name.c_str(), wire_inv_name.c_str());
- module->addNotGate(stringf("\\__%d__$not", variable), wire_inv, wire); // FIXME: is "$not" the right suffix?
-
- return wire;
+ const unsigned variable = literal >> 1;
+ const bool invert = literal & 1;
- RTLIL::IdString wire_name(stringf("\\n%d%s", variable, invert ? "_inv" : "")); // FIXME: is "_inv" the right suffix?
++ RTLIL::IdString wire_name(stringf("\\__%d%s__", variable, invert ? "b" : "")); // FIXME: is "b" the right suffix?
+ RTLIL::Wire *wire = module->wire(wire_name);
+ if (wire) return wire;
+ log_debug("Creating %s\n", wire_name.c_str());
+ wire = module->addWire(wire_name);
++ wire->port_input = wire->port_output = false;
+ if (!invert) return wire;
- RTLIL::IdString wire_inv_name(stringf("\\n%d", variable));
++ RTLIL::IdString wire_inv_name(stringf("\\__%d__", variable));
+ RTLIL::Wire *wire_inv = module->wire(wire_inv_name);
+ if (wire_inv) {
+ if (module->cell(wire_inv_name)) return wire;
+ }
+ else {
+ log_debug("Creating %s\n", wire_inv_name.c_str());
+ wire_inv = module->addWire(wire_inv_name);
++ wire_inv->port_input = wire_inv->port_output = false;
+ }
+
+ log_debug("Creating %s = ~%s\n", wire_name.c_str(), wire_inv_name.c_str());
- module->addNotGate(stringf("\\n%d_not", variable), wire_inv, wire); // FIXME: is "_not" the right suffix?
++ module->addNotGate(stringf("\\__%d__$not", variable), wire_inv, wire); // FIXME: is "$not" the right suffix?
+
+ return wire;
}
- std::string header;
- f >> header;
- if (header != "aag" && header != "aig")
- log_error("Unsupported AIGER file!\n");
-
- // Parse rest of header
- if (!(f >> M >> I >> L >> O >> A))
- log_error("Invalid AIGER header\n");
-
- // Optional values
- B = C = J = F = 0;
-
- std::string line;
- std::getline(f, line); // Ignore up to start of next line, as standard
- // says anything that follows could be used for
- // optional sections
-
- log_debug("M=%u I=%u L=%u O=%u A=%u\n", M, I, L, O, A);
-
- line_count = 1;
- piNum = 0;
- flopNum = 0;
-
- if (header == "aag")
- parse_aiger_ascii();
- else if (header == "aig")
- parse_aiger_binary();
- else
- log_abort();
-
- dict<int,IdString> box_lookup;
- for (auto m : design->modules()) {
- auto it = m->attributes.find("\\abc_box_id");
- if (it == m->attributes.end())
- continue;
- if (m->name[0] == '$') continue;
- auto r = box_lookup.insert(std::make_pair(it->second.as_int(), m->name));
- log_assert(r.second);
- }
-
- // Parse footer (symbol table, comments, etc.)
- std::string s;
- bool comment_seen = false;
- for (int c = f.peek(); c != EOF; c = f.peek()) {
- if (comment_seen || c == 'c') {
- if (!comment_seen) {
- f.ignore(1);
- c = f.peek();
- comment_seen = true;
- }
- if (c == '\n')
- break;
- f.ignore(1);
- // XAIGER extensions
- if (c == 'm') {
- uint32_t dataSize = parse_xaiger_literal(f);
- uint32_t lutNum = parse_xaiger_literal(f);
- uint32_t lutSize = parse_xaiger_literal(f);
- log_debug("m: dataSize=%u lutNum=%u lutSize=%u\n", dataSize, lutNum, lutSize);
- ConstEval ce(module);
- for (unsigned i = 0; i < lutNum; ++i) {
- uint32_t rootNodeID = parse_xaiger_literal(f);
- uint32_t cutLeavesM = parse_xaiger_literal(f);
- log_debug("rootNodeID=%d cutLeavesM=%d\n", rootNodeID, cutLeavesM);
- RTLIL::Wire *output_sig = module->wire(stringf("\\__%d__", rootNodeID));
- uint32_t nodeID;
- RTLIL::SigSpec input_sig;
- for (unsigned j = 0; j < cutLeavesM; ++j) {
- nodeID = parse_xaiger_literal(f);
- log_debug("\t%u\n", nodeID);
- RTLIL::Wire *wire = module->wire(stringf("\\__%d__", nodeID));
- log_assert(wire);
- input_sig.append(wire);
- }
- RTLIL::Const lut_mask(RTLIL::State::Sx, 1 << input_sig.size());
- for (int j = 0; j < (1 << cutLeavesM); ++j) {
- ce.push();
- ce.set(input_sig, RTLIL::Const{j, static_cast<int>(cutLeavesM)});
- RTLIL::SigSpec o(output_sig);
- ce.eval(o);
- lut_mask[j] = o.as_const()[0];
- ce.pop();
- }
- RTLIL::Cell *output_cell = module->cell(stringf("\\__%d__$and", rootNodeID));
- log_assert(output_cell);
- module->remove(output_cell);
- module->addLut(stringf("\\__%d__$lut", rootNodeID), input_sig, output_sig, std::move(lut_mask));
- }
- }
- else if (c == 'r') {
- uint32_t dataSize = parse_xaiger_literal(f);
- flopNum = parse_xaiger_literal(f);
- log_assert(dataSize == (flopNum+1) * sizeof(uint32_t));
- f.ignore(flopNum * sizeof(uint32_t));
- }
- else if (c == 'n') {
- parse_xaiger_literal(f);
- f >> s;
- log_debug("n: '%s'\n", s.c_str());
- }
- else if (c == 'h') {
- f.ignore(sizeof(uint32_t));
- uint32_t version = parse_xaiger_literal(f);
- log_assert(version == 1);
- uint32_t ciNum = parse_xaiger_literal(f);
- log_debug("ciNum = %u\n", ciNum);
- uint32_t coNum = parse_xaiger_literal(f);
- log_debug("coNum = %u\n", coNum);
- piNum = parse_xaiger_literal(f);
- log_debug("piNum = %u\n", piNum);
- uint32_t poNum = parse_xaiger_literal(f);
- log_debug("poNum = %u\n", poNum);
- uint32_t boxNum = parse_xaiger_literal(f);
- log_debug("boxNum = %u\n", poNum);
- for (unsigned i = 0; i < boxNum; i++) {
- f.ignore(2*sizeof(uint32_t));
- uint32_t boxUniqueId = parse_xaiger_literal(f);
- log_assert(boxUniqueId > 0);
- uint32_t oldBoxNum = parse_xaiger_literal(f);
- RTLIL::Cell* cell = module->addCell(stringf("$__box%u__", oldBoxNum), box_lookup.at(boxUniqueId));
- boxes.emplace_back(cell);
- }
- }
- else if (c == 'a' || c == 'i' || c == 'o') {
- uint32_t dataSize = parse_xaiger_literal(f);
- f.ignore(dataSize);
- }
- else {
- break;
- }
- }
- else
- log_error("Line %u: cannot interpret first character '%c'!\n", line_count, c);
- }
-
- post_process();
+void AigerReader::parse_xaiger()
+{
++ std::string header;
++ f >> header;
++ if (header != "aag" && header != "aig")
++ log_error("Unsupported AIGER file!\n");
++
++ // Parse rest of header
++ if (!(f >> M >> I >> L >> O >> A))
++ log_error("Invalid AIGER header\n");
++
++ // Optional values
++ B = C = J = F = 0;
++
++ std::string line;
++ std::getline(f, line); // Ignore up to start of next line, as standard
++ // says anything that follows could be used for
++ // optional sections
++
++ log_debug("M=%u I=%u L=%u O=%u A=%u\n", M, I, L, O, A);
++
++ line_count = 1;
++ piNum = 0;
++ flopNum = 0;
++
++ if (header == "aag")
++ parse_aiger_ascii();
++ else if (header == "aig")
++ parse_aiger_binary();
++ else
++ log_abort();
++
++ dict<int,IdString> box_lookup;
++ for (auto m : design->modules()) {
++ auto it = m->attributes.find("\\abc_box_id");
++ if (it == m->attributes.end())
++ continue;
++ if (m->name[0] == '$') continue;
++ auto r = box_lookup.insert(std::make_pair(it->second.as_int(), m->name));
++ log_assert(r.second);
++ }
++
++ // Parse footer (symbol table, comments, etc.)
++ std::string s;
++ bool comment_seen = false;
++ for (int c = f.peek(); c != EOF; c = f.peek()) {
++ if (comment_seen || c == 'c') {
++ if (!comment_seen) {
++ f.ignore(1);
++ c = f.peek();
++ comment_seen = true;
++ }
++ if (c == '\n')
++ break;
++ f.ignore(1);
++ // XAIGER extensions
++ if (c == 'm') {
++ uint32_t dataSize = parse_xaiger_literal(f);
++ uint32_t lutNum = parse_xaiger_literal(f);
++ uint32_t lutSize = parse_xaiger_literal(f);
++ log_debug("m: dataSize=%u lutNum=%u lutSize=%u\n", dataSize, lutNum, lutSize);
++ ConstEval ce(module);
++ for (unsigned i = 0; i < lutNum; ++i) {
++ uint32_t rootNodeID = parse_xaiger_literal(f);
++ uint32_t cutLeavesM = parse_xaiger_literal(f);
++ log_debug("rootNodeID=%d cutLeavesM=%d\n", rootNodeID, cutLeavesM);
++ RTLIL::Wire *output_sig = module->wire(stringf("\\__%d__", rootNodeID));
++ uint32_t nodeID;
++ RTLIL::SigSpec input_sig;
++ for (unsigned j = 0; j < cutLeavesM; ++j) {
++ nodeID = parse_xaiger_literal(f);
++ log_debug("\t%u\n", nodeID);
++ RTLIL::Wire *wire = module->wire(stringf("\\__%d__", nodeID));
++ log_assert(wire);
++ input_sig.append(wire);
++ }
++ RTLIL::Const lut_mask(RTLIL::State::Sx, 1 << input_sig.size());
++ for (int j = 0; j < (1 << cutLeavesM); ++j) {
++ ce.push();
++ ce.set(input_sig, RTLIL::Const{j, static_cast<int>(cutLeavesM)});
++ RTLIL::SigSpec o(output_sig);
++ ce.eval(o);
++ lut_mask[j] = o.as_const()[0];
++ ce.pop();
++ }
++ RTLIL::Cell *output_cell = module->cell(stringf("\\__%d__$and", rootNodeID));
++ log_assert(output_cell);
++ module->remove(output_cell);
++ module->addLut(stringf("\\__%d__$lut", rootNodeID), input_sig, output_sig, std::move(lut_mask));
++ }
++ }
++ else if (c == 'r') {
++ uint32_t dataSize = parse_xaiger_literal(f);
++ flopNum = parse_xaiger_literal(f);
++ log_assert(dataSize == (flopNum+1) * sizeof(uint32_t));
++ f.ignore(flopNum * sizeof(uint32_t));
++ }
++ else if (c == 'n') {
++ parse_xaiger_literal(f);
++ f >> s;
++ log_debug("n: '%s'\n", s.c_str());
++ }
++ else if (c == 'h') {
++ f.ignore(sizeof(uint32_t));
++ uint32_t version = parse_xaiger_literal(f);
++ log_assert(version == 1);
++ uint32_t ciNum = parse_xaiger_literal(f);
++ log_debug("ciNum = %u\n", ciNum);
++ uint32_t coNum = parse_xaiger_literal(f);
++ log_debug("coNum = %u\n", coNum);
++ piNum = parse_xaiger_literal(f);
++ log_debug("piNum = %u\n", piNum);
++ uint32_t poNum = parse_xaiger_literal(f);
++ log_debug("poNum = %u\n", poNum);
++ uint32_t boxNum = parse_xaiger_literal(f);
++ log_debug("boxNum = %u\n", poNum);
++ for (unsigned i = 0; i < boxNum; i++) {
++ f.ignore(2*sizeof(uint32_t));
++ uint32_t boxUniqueId = parse_xaiger_literal(f);
++ log_assert(boxUniqueId > 0);
++ uint32_t oldBoxNum = parse_xaiger_literal(f);
++ RTLIL::Cell* cell = module->addCell(stringf("$__box%u__", oldBoxNum), box_lookup.at(boxUniqueId));
++ boxes.emplace_back(cell);
++ }
++ }
++ else if (c == 'a' || c == 'i' || c == 'o') {
++ uint32_t dataSize = parse_xaiger_literal(f);
++ f.ignore(dataSize);
++ }
++ else {
++ break;
++ }
++ }
++ else
++ log_error("Line %u: cannot interpret first character '%c'!\n", line_count, c);
++ }
++
++ post_process();
+}
+
void AigerReader::parse_aiger_ascii()
{
- std::string line;
- std::stringstream ss;
-
- unsigned l1, l2, l3;
-
- // Parse inputs
- for (unsigned i = 0; i < I; ++i, ++line_count) {
- if (!(f >> l1))
- log_error("Line %u cannot be interpreted as an input!\n", line_count);
- log_debug("%d is an input\n", l1);
- log_assert(!(l1 & 1)); // Inputs can't be inverted
- RTLIL::Wire *wire = createWireIfNotExists(module, l1);
- wire->port_input = true;
- inputs.push_back(wire);
- }
-
- // Parse latches
- RTLIL::Wire *clk_wire = nullptr;
- if (L > 0) {
- log_assert(clk_name != "");
- clk_wire = module->wire(clk_name);
- log_assert(!clk_wire);
- log_debug("Creating %s\n", clk_name.c_str());
- clk_wire = module->addWire(clk_name);
- clk_wire->port_input = true;
- clk_wire->port_output = false;
- }
- for (unsigned i = 0; i < L; ++i, ++line_count) {
- if (!(f >> l1 >> l2))
- log_error("Line %u cannot be interpreted as a latch!\n", line_count);
- log_debug("%d %d is a latch\n", l1, l2);
- log_assert(!(l1 & 1)); // TODO: Latch outputs can't be inverted?
- RTLIL::Wire *q_wire = createWireIfNotExists(module, l1);
- RTLIL::Wire *d_wire = createWireIfNotExists(module, l2);
-
- module->addDffGate(NEW_ID, clk_wire, d_wire, q_wire);
-
- // Reset logic is optional in AIGER 1.9
- if (f.peek() == ' ') {
- if (!(f >> l3))
- log_error("Line %u cannot be interpreted as a latch!\n", line_count);
-
- if (l3 == 0 || l3 == 1)
- q_wire->attributes["\\init"] = RTLIL::Const(l3);
- else if (l3 == l1) {
- //q_wire->attributes["\\init"] = RTLIL::Const(RTLIL::State::Sx);
- }
- else
- log_error("Line %u has invalid reset literal for latch!\n", line_count);
- }
- else {
- // AIGER latches are assumed to be initialized to zero
- q_wire->attributes["\\init"] = RTLIL::Const(0);
- }
- latches.push_back(q_wire);
- }
-
- // Parse outputs
- for (unsigned i = 0; i < O; ++i, ++line_count) {
- if (!(f >> l1))
- log_error("Line %u cannot be interpreted as an output!\n", line_count);
-
- RTLIL::Wire *wire;
- if (l1 == 0 || l1 == 1) {
- wire = module->addWire(NEW_ID);
- if (l1 == 0)
- module->connect(wire, RTLIL::State::S0);
- else if (l1 == 1)
- module->connect(wire, RTLIL::State::S1);
- else
- log_abort();
- }
- else {
- log_debug("%d is an output\n", l1);
- const unsigned variable = l1 >> 1;
- const bool invert = l1 & 1;
- RTLIL::IdString wire_name(stringf("\\__%d%s__", variable, invert ? "b" : "")); // FIXME: is "b" the right suffix?
- wire = module->wire(wire_name);
- if (!wire)
- wire = createWireIfNotExists(module, l1);
- else {
- if (wire->port_input || wire->port_output) {
- RTLIL::Wire *new_wire = module->addWire(NEW_ID);
- module->connect(new_wire, wire);
- wire = new_wire;
- }
- }
- }
- wire->port_output = true;
- outputs.push_back(wire);
- }
- std::getline(f, line); // Ignore up to start of next line
-
- // TODO: Parse bad state properties
- for (unsigned i = 0; i < B; ++i, ++line_count)
- std::getline(f, line); // Ignore up to start of next line
-
- // TODO: Parse invariant constraints
- for (unsigned i = 0; i < C; ++i, ++line_count)
- std::getline(f, line); // Ignore up to start of next line
-
- // TODO: Parse justice properties
- for (unsigned i = 0; i < J; ++i, ++line_count)
- std::getline(f, line); // Ignore up to start of next line
-
- // TODO: Parse fairness constraints
- for (unsigned i = 0; i < F; ++i, ++line_count)
- std::getline(f, line); // Ignore up to start of next line
-
- // Parse AND
- for (unsigned i = 0; i < A; ++i) {
- if (!(f >> l1 >> l2 >> l3))
- log_error("Line %u cannot be interpreted as an AND!\n", line_count);
-
- log_debug("%d %d %d is an AND\n", l1, l2, l3);
- log_assert(!(l1 & 1));
- RTLIL::Wire *o_wire = createWireIfNotExists(module, l1);
- RTLIL::Wire *i1_wire = createWireIfNotExists(module, l2);
- RTLIL::Wire *i2_wire = createWireIfNotExists(module, l3);
- module->addAndGate(o_wire->name.str() + "$and", i1_wire, i2_wire, o_wire);
- }
- std::getline(f, line); // Ignore up to start of next line
+ std::string line;
+ std::stringstream ss;
+
+ unsigned l1, l2, l3;
+
+ // Parse inputs
+ for (unsigned i = 1; i <= I; ++i, ++line_count) {
+ if (!(f >> l1))
+ log_error("Line %u cannot be interpreted as an input!\n", line_count);
+ log_debug("%d is an input\n", l1);
- log_assert(!(l1 & 1)); // TODO: Inputs can't be inverted?
++ log_assert(!(l1 & 1)); // Inputs can't be inverted
+ RTLIL::Wire *wire = createWireIfNotExists(module, l1);
+ wire->port_input = true;
+ inputs.push_back(wire);
+ }
+
+ // Parse latches
+ RTLIL::Wire *clk_wire = nullptr;
+ if (L > 0) {
++ log_assert(clk_name != "");
+ clk_wire = module->wire(clk_name);
+ log_assert(!clk_wire);
+ log_debug("Creating %s\n", clk_name.c_str());
+ clk_wire = module->addWire(clk_name);
+ clk_wire->port_input = true;
++ clk_wire->port_output = false;
+ }
+ for (unsigned i = 0; i < L; ++i, ++line_count) {
+ if (!(f >> l1 >> l2))
+ log_error("Line %u cannot be interpreted as a latch!\n", line_count);
+ log_debug("%d %d is a latch\n", l1, l2);
+ log_assert(!(l1 & 1)); // TODO: Latch outputs can't be inverted?
+ RTLIL::Wire *q_wire = createWireIfNotExists(module, l1);
+ RTLIL::Wire *d_wire = createWireIfNotExists(module, l2);
+
+ module->addDffGate(NEW_ID, clk_wire, d_wire, q_wire);
+
+ // Reset logic is optional in AIGER 1.9
+ if (f.peek() == ' ') {
+ if (!(f >> l3))
+ log_error("Line %u cannot be interpreted as a latch!\n", line_count);
+
+ if (l3 == 0)
+ q_wire->attributes["\\init"] = RTLIL::S0;
+ else if (l3 == 1)
+ q_wire->attributes["\\init"] = RTLIL::S1;
+ else if (l3 == l1) {
- //q_wire->attributes["\\init"] = RTLIL::Const(RTLIL::State::Sx);
++ //q_wire->attributes["\\init"] = RTLIL::Sx;
+ }
+ else
+ log_error("Line %u has invalid reset literal for latch!\n", line_count);
+ }
+ else {
+ // AIGER latches are assumed to be initialized to zero
+ q_wire->attributes["\\init"] = RTLIL::S0;
+ }
+ latches.push_back(q_wire);
+ }
+
+ // Parse outputs
+ for (unsigned i = 0; i < O; ++i, ++line_count) {
+ if (!(f >> l1))
+ log_error("Line %u cannot be interpreted as an output!\n", line_count);
+
- log_debug("%d is an output\n", l1);
- RTLIL::Wire *wire = createWireIfNotExists(module, l1);
++ RTLIL::Wire *wire;
++ if (l1 == 0 || l1 == 1) {
++ wire = module->addWire(NEW_ID);
++ if (l1 == 0)
++ module->connect(wire, RTLIL::State::S0);
++ else if (l1 == 1)
++ module->connect(wire, RTLIL::State::S1);
++ else
++ log_abort();
++ }
++ else {
++ log_debug("%d is an output\n", l1);
++ const unsigned variable = l1 >> 1;
++ const bool invert = l1 & 1;
++ RTLIL::IdString wire_name(stringf("\\__%d%s__", variable, invert ? "b" : "")); // FIXME: is "b" the right suffix?
++ wire = module->wire(wire_name);
++ if (!wire)
++ wire = createWireIfNotExists(module, l1);
++ else {
++ if (wire->port_input || wire->port_output) {
++ RTLIL::Wire *new_wire = module->addWire(NEW_ID);
++ module->connect(new_wire, wire);
++ wire = new_wire;
++ }
++ }
++ }
+ wire->port_output = true;
+ outputs.push_back(wire);
+ }
+
+ // Parse bad properties
+ for (unsigned i = 0; i < B; ++i, ++line_count) {
+ if (!(f >> l1))
+ log_error("Line %u cannot be interpreted as a bad state property!\n", line_count);
+
+ log_debug("%d is a bad state property\n", l1);
+ RTLIL::Wire *wire = createWireIfNotExists(module, l1);
+ wire->port_output = true;
+ bad_properties.push_back(wire);
+ }
+
+ // TODO: Parse invariant constraints
+ for (unsigned i = 0; i < C; ++i, ++line_count)
+ std::getline(f, line); // Ignore up to start of next line
+
+ // TODO: Parse justice properties
+ for (unsigned i = 0; i < J; ++i, ++line_count)
+ std::getline(f, line); // Ignore up to start of next line
+
+ // TODO: Parse fairness constraints
+ for (unsigned i = 0; i < F; ++i, ++line_count)
+ std::getline(f, line); // Ignore up to start of next line
+
+ // Parse AND
+ for (unsigned i = 0; i < A; ++i) {
+ if (!(f >> l1 >> l2 >> l3))
+ log_error("Line %u cannot be interpreted as an AND!\n", line_count);
+
+ log_debug("%d %d %d is an AND\n", l1, l2, l3);
- log_assert(!(l1 & 1)); // TODO: Output of ANDs can't be inverted?
++ log_assert(!(l1 & 1));
+ RTLIL::Wire *o_wire = createWireIfNotExists(module, l1);
+ RTLIL::Wire *i1_wire = createWireIfNotExists(module, l2);
+ RTLIL::Wire *i2_wire = createWireIfNotExists(module, l3);
- module->addAndGate(NEW_ID, i1_wire, i2_wire, o_wire);
++ module->addAndGate(o_wire->name.str() + "$and", i1_wire, i2_wire, o_wire);
+ }
+ std::getline(f, line); // Ignore up to start of next line
}
static unsigned parse_next_delta_literal(std::istream &f, unsigned ref)
void AigerReader::parse_aiger_binary()
{
- unsigned l1, l2, l3;
- std::string line;
-
- // Parse inputs
- for (unsigned i = 1; i <= I; ++i) {
- log_debug("%d is an input\n", i);
- RTLIL::Wire *wire = createWireIfNotExists(module, i << 1);
- wire->port_input = true;
- log_assert(!wire->port_output);
- inputs.push_back(wire);
- }
-
- // Parse latches
- RTLIL::Wire *clk_wire = nullptr;
- if (L > 0) {
- log_assert(clk_name != "");
- clk_wire = module->wire(clk_name);
- log_assert(!clk_wire);
- log_debug("Creating %s\n", clk_name.c_str());
- clk_wire = module->addWire(clk_name);
- clk_wire->port_input = true;
- clk_wire->port_output = false;
- }
- l1 = (I+1) * 2;
- for (unsigned i = 0; i < L; ++i, ++line_count, l1 += 2) {
- if (!(f >> l2))
- log_error("Line %u cannot be interpreted as a latch!\n", line_count);
- log_debug("%d %d is a latch\n", l1, l2);
- RTLIL::Wire *q_wire = createWireIfNotExists(module, l1);
- RTLIL::Wire *d_wire = createWireIfNotExists(module, l2);
-
- module->addDff(NEW_ID, clk_wire, d_wire, q_wire);
-
- // Reset logic is optional in AIGER 1.9
- if (f.peek() == ' ') {
- if (!(f >> l3))
- log_error("Line %u cannot be interpreted as a latch!\n", line_count);
-
- if (l3 == 0 || l3 == 1)
- q_wire->attributes["\\init"] = RTLIL::Const(l3);
- else if (l3 == l1) {
- //q_wire->attributes["\\init"] = RTLIL::Const(RTLIL::State::Sx);
- }
- else
- log_error("Line %u has invalid reset literal for latch!\n", line_count);
- }
- else {
- // AIGER latches are assumed to be initialized to zero
- q_wire->attributes["\\init"] = RTLIL::Const(0);
- }
- latches.push_back(q_wire);
- }
-
- // Parse outputs
- for (unsigned i = 0; i < O; ++i, ++line_count) {
- if (!(f >> l1))
- log_error("Line %u cannot be interpreted as an output!\n", line_count);
-
- RTLIL::Wire *wire;
- if (l1 == 0 || l1 == 1) {
- wire = module->addWire(NEW_ID);
- if (l1 == 0)
- module->connect(wire, RTLIL::State::S0);
- else if (l1 == 1)
- module->connect(wire, RTLIL::State::S1);
- else
- log_abort();
- }
- else {
- log_debug("%d is an output\n", l1);
- const unsigned variable = l1 >> 1;
- const bool invert = l1 & 1;
- RTLIL::IdString wire_name(stringf("\\__%d%s__", variable, invert ? "b" : "")); // FIXME: is "_b" the right suffix?
- wire = module->wire(wire_name);
- if (!wire)
- wire = createWireIfNotExists(module, l1);
- else {
- if (wire->port_input || wire->port_output) {
- RTLIL::Wire *new_wire = module->addWire(NEW_ID);
- module->connect(new_wire, wire);
- wire = new_wire;
- }
- }
- }
- wire->port_output = true;
- outputs.push_back(wire);
- }
- std::getline(f, line); // Ignore up to start of next line
-
- // TODO: Parse bad state properties
- for (unsigned i = 0; i < B; ++i, ++line_count)
- std::getline(f, line); // Ignore up to start of next line
-
- // TODO: Parse invariant constraints
- for (unsigned i = 0; i < C; ++i, ++line_count)
- std::getline(f, line); // Ignore up to start of next line
-
- // TODO: Parse justice properties
- for (unsigned i = 0; i < J; ++i, ++line_count)
- std::getline(f, line); // Ignore up to start of next line
-
- // TODO: Parse fairness constraints
- for (unsigned i = 0; i < F; ++i, ++line_count)
- std::getline(f, line); // Ignore up to start of next line
-
- // Parse AND
- l1 = (I+L+1) << 1;
- for (unsigned i = 0; i < A; ++i, ++line_count, l1 += 2) {
- l2 = parse_next_delta_literal(f, l1);
- l3 = parse_next_delta_literal(f, l2);
-
- log_debug("%d %d %d is an AND\n", l1, l2, l3);
- log_assert(!(l1 & 1));
- RTLIL::Wire *o_wire = createWireIfNotExists(module, l1);
- RTLIL::Wire *i1_wire = createWireIfNotExists(module, l2);
- RTLIL::Wire *i2_wire = createWireIfNotExists(module, l3);
- module->addAndGate(o_wire->name.str() + "$and", i1_wire, i2_wire, o_wire);
- }
+ unsigned l1, l2, l3;
+ std::string line;
+
+ // Parse inputs
+ for (unsigned i = 1; i <= I; ++i) {
++ log_debug("%d is an input\n", i);
+ RTLIL::Wire *wire = createWireIfNotExists(module, i << 1);
+ wire->port_input = true;
++ log_assert(!wire->port_output);
+ inputs.push_back(wire);
+ }
+
+ // Parse latches
+ RTLIL::Wire *clk_wire = nullptr;
+ if (L > 0) {
++ log_assert(clk_name != "");
+ clk_wire = module->wire(clk_name);
+ log_assert(!clk_wire);
+ log_debug("Creating %s\n", clk_name.c_str());
+ clk_wire = module->addWire(clk_name);
+ clk_wire->port_input = true;
++ clk_wire->port_output = false;
+ }
+ l1 = (I+1) * 2;
+ for (unsigned i = 0; i < L; ++i, ++line_count, l1 += 2) {
+ if (!(f >> l2))
+ log_error("Line %u cannot be interpreted as a latch!\n", line_count);
+ log_debug("%d %d is a latch\n", l1, l2);
+ RTLIL::Wire *q_wire = createWireIfNotExists(module, l1);
+ RTLIL::Wire *d_wire = createWireIfNotExists(module, l2);
+
+ module->addDff(NEW_ID, clk_wire, d_wire, q_wire);
+
+ // Reset logic is optional in AIGER 1.9
+ if (f.peek() == ' ') {
+ if (!(f >> l3))
+ log_error("Line %u cannot be interpreted as a latch!\n", line_count);
+
+ if (l3 == 0)
+ q_wire->attributes["\\init"] = RTLIL::S0;
+ else if (l3 == 1)
+ q_wire->attributes["\\init"] = RTLIL::S1;
+ else if (l3 == l1) {
- //q_wire->attributes["\\init"] = RTLIL::Const(RTLIL::State::Sx);
++ //q_wire->attributes["\\init"] = RTLIL::Sx;
+ }
+ else
+ log_error("Line %u has invalid reset literal for latch!\n", line_count);
+ }
+ else {
+ // AIGER latches are assumed to be initialized to zero
+ q_wire->attributes["\\init"] = RTLIL::S0;
+ }
+ latches.push_back(q_wire);
+ }
+
+ // Parse outputs
+ for (unsigned i = 0; i < O; ++i, ++line_count) {
+ if (!(f >> l1))
+ log_error("Line %u cannot be interpreted as an output!\n", line_count);
+
- log_debug("%d is an output\n", l1);
- RTLIL::Wire *wire = createWireIfNotExists(module, l1);
++ RTLIL::Wire *wire;
++ if (l1 == 0 || l1 == 1) {
++ wire = module->addWire(NEW_ID);
++ if (l1 == 0)
++ module->connect(wire, RTLIL::State::S0);
++ else if (l1 == 1)
++ module->connect(wire, RTLIL::State::S1);
++ else
++ log_abort();
++ }
++ else {
++ log_debug("%d is an output\n", l1);
++ const unsigned variable = l1 >> 1;
++ const bool invert = l1 & 1;
++ RTLIL::IdString wire_name(stringf("\\__%d%s__", variable, invert ? "b" : "")); // FIXME: is "_b" the right suffix?
++ wire = module->wire(wire_name);
++ if (!wire)
++ wire = createWireIfNotExists(module, l1);
++ else {
++ if (wire->port_input || wire->port_output) {
++ RTLIL::Wire *new_wire = module->addWire(NEW_ID);
++ module->connect(new_wire, wire);
++ wire = new_wire;
++ }
++ }
++ }
+ wire->port_output = true;
+ outputs.push_back(wire);
+ }
+ std::getline(f, line); // Ignore up to start of next line
+
+ // Parse bad properties
+ for (unsigned i = 0; i < B; ++i, ++line_count) {
+ if (!(f >> l1))
+ log_error("Line %u cannot be interpreted as a bad state property!\n", line_count);
+
+ log_debug("%d is a bad state property\n", l1);
+ RTLIL::Wire *wire = createWireIfNotExists(module, l1);
+ wire->port_output = true;
+ bad_properties.push_back(wire);
+ }
+ if (B > 0)
+ std::getline(f, line); // Ignore up to start of next line
+
+ // TODO: Parse invariant constraints
+ for (unsigned i = 0; i < C; ++i, ++line_count)
+ std::getline(f, line); // Ignore up to start of next line
+
+ // TODO: Parse justice properties
+ for (unsigned i = 0; i < J; ++i, ++line_count)
+ std::getline(f, line); // Ignore up to start of next line
+
+ // TODO: Parse fairness constraints
+ for (unsigned i = 0; i < F; ++i, ++line_count)
+ std::getline(f, line); // Ignore up to start of next line
+
+ // Parse AND
+ l1 = (I+L+1) << 1;
+ for (unsigned i = 0; i < A; ++i, ++line_count, l1 += 2) {
+ l2 = parse_next_delta_literal(f, l1);
+ l3 = parse_next_delta_literal(f, l2);
+
+ log_debug("%d %d %d is an AND\n", l1, l2, l3);
- log_assert(!(l1 & 1)); // TODO: Output of ANDs can't be inverted?
++ log_assert(!(l1 & 1));
+ RTLIL::Wire *o_wire = createWireIfNotExists(module, l1);
+ RTLIL::Wire *i1_wire = createWireIfNotExists(module, l2);
+ RTLIL::Wire *i2_wire = createWireIfNotExists(module, l3);
++ module->addAndGate(o_wire->name.str() + "$and", i1_wire, i2_wire, o_wire);
++ }
+}
+
+void AigerReader::post_process()
+{
- pool<RTLIL::Module*> abc_carry_modules;
- unsigned ci_count = 0, co_count = 0, flop_count = 0;
- for (auto cell : boxes) {
- RTLIL::Module* box_module = design->module(cell->type);
- log_assert(box_module);
-
- if (box_module->attributes.count("\\abc_carry") && !abc_carry_modules.count(box_module)) {
- RTLIL::Wire* carry_in = nullptr, *carry_out = nullptr;
- RTLIL::Wire* last_in = nullptr, *last_out = nullptr;
- for (const auto &port_name : box_module->ports) {
- RTLIL::Wire* w = box_module->wire(port_name);
- log_assert(w);
- if (w->port_input) {
- if (w->attributes.count("\\abc_carry_in")) {
- log_assert(!carry_in);
- carry_in = w;
- }
- log_assert(!last_in || last_in->port_id < w->port_id);
- last_in = w;
- }
- if (w->port_output) {
- if (w->attributes.count("\\abc_carry_out")) {
- log_assert(!carry_out);
- carry_out = w;
- }
- log_assert(!last_out || last_out->port_id < w->port_id);
- last_out = w;
- }
- }
-
- if (carry_in != last_in) {
- std::swap(box_module->ports[carry_in->port_id], box_module->ports[last_in->port_id]);
- std::swap(carry_in->port_id, last_in->port_id);
- }
- if (carry_out != last_out) {
- log_assert(last_out);
- std::swap(box_module->ports[carry_out->port_id], box_module->ports[last_out->port_id]);
- std::swap(carry_out->port_id, last_out->port_id);
- }
- }
-
- bool flop = box_module->attributes.count("\\abc_flop");
- log_assert(!flop || flop_count < flopNum);
-
- // NB: Assume box_module->ports are sorted alphabetically
- // (as RTLIL::Module::fixup_ports() would do)
- for (auto port_name : box_module->ports) {
- RTLIL::Wire* w = box_module->wire(port_name);
- log_assert(w);
- RTLIL::SigSpec rhs;
- RTLIL::Wire* wire = nullptr;
- for (int i = 0; i < GetSize(w); i++) {
- if (w->port_input) {
- log_assert(co_count < outputs.size());
- wire = outputs[co_count++];
- log_assert(wire);
- log_assert(wire->port_output);
- wire->port_output = false;
-
- if (flop && w->attributes.count("\\abc_flop_d")) {
- RTLIL::Wire* d = outputs[outputs.size() - flopNum + flop_count];
- log_assert(d);
- log_assert(d->port_output);
- d->port_output = false;
- }
- }
- if (w->port_output) {
- log_assert((piNum + ci_count) < inputs.size());
- wire = inputs[piNum + ci_count++];
- log_assert(wire);
- log_assert(wire->port_input);
- wire->port_input = false;
-
- if (flop && w->attributes.count("\\abc_flop_q")) {
- wire = inputs[piNum - flopNum + flop_count];
- log_assert(wire);
- log_assert(wire->port_input);
- wire->port_input = false;
- }
- }
- rhs.append(wire);
- }
- cell->setPort(port_name, rhs);
- }
-
- if (flop) flop_count++;
- }
-
- dict<RTLIL::IdString, int> wideports_cache;
-
- if (!map_filename.empty()) {
- std::ifstream mf(map_filename);
- std::string type, symbol;
- int variable, index;
- while (mf >> type >> variable >> index >> symbol) {
- RTLIL::IdString escaped_s = RTLIL::escape_id(symbol);
- if (type == "input") {
- log_assert(static_cast<unsigned>(variable) < inputs.size());
- RTLIL::Wire* wire = inputs[variable];
- log_assert(wire);
- log_assert(wire->port_input);
-
- if (index == 0) {
- // Cope with the fact that a CI might be identical
- // to a PI (necessary due to ABC); in those cases
- // simply connect the latter to the former
- RTLIL::Wire* existing = module->wire(escaped_s);
- if (!existing)
- module->rename(wire, escaped_s);
- else {
- wire->port_input = false;
- module->connect(wire, existing);
- }
- }
- else if (index > 0) {
- std::string indexed_name = stringf("%s[%d]", escaped_s.c_str(), index);
- RTLIL::Wire* existing = module->wire(indexed_name);
- if (!existing) {
- module->rename(wire, indexed_name);
- if (wideports)
- wideports_cache[escaped_s] = std::max(wideports_cache[escaped_s], index);
- }
- else {
- module->connect(wire, existing);
- wire->port_input = false;
- }
- }
- }
- else if (type == "output") {
- log_assert(static_cast<unsigned>(variable + co_count) < outputs.size());
- RTLIL::Wire* wire = outputs[variable + co_count];
- log_assert(wire);
- log_assert(wire->port_output);
- if (escaped_s.in("\\__dummy_o__", "\\__const0__", "\\__const1__")) {
- wire->port_output = false;
- continue;
- }
-
- if (index == 0) {
- // Cope with the fact that a CO might be identical
- // to a PO (necessary due to ABC); in those cases
- // simply connect the latter to the former
- RTLIL::Wire* existing = module->wire(escaped_s);
- if (!existing) {
- if (escaped_s.ends_with("$inout.out")) {
- wire->port_output = false;
- RTLIL::Wire *in_wire = module->wire(escaped_s.substr(0, escaped_s.size()-10));
- log_assert(in_wire);
- log_assert(in_wire->port_input && !in_wire->port_output);
- in_wire->port_output = true;
- module->connect(in_wire, wire);
- }
- else
- module->rename(wire, escaped_s);
- }
- else {
- wire->port_output = false;
- module->connect(wire, existing);
- }
- }
- else if (index > 0) {
- std::string indexed_name = stringf("%s[%d]", escaped_s.c_str(), index);
- RTLIL::Wire* existing = module->wire(indexed_name);
- if (!existing) {
- if (escaped_s.ends_with("$inout.out")) {
- wire->port_output = false;
- RTLIL::Wire *in_wire = module->wire(stringf("%s[%d]", escaped_s.substr(0, escaped_s.size()-10).c_str(), index));
- log_assert(in_wire);
- log_assert(in_wire->port_input && !in_wire->port_output);
- in_wire->port_output = true;
- module->connect(in_wire, wire);
- }
- else {
- module->rename(wire, indexed_name);
- if (wideports)
- wideports_cache[escaped_s] = std::max(wideports_cache[escaped_s], index);
- }
- }
- else {
- module->connect(wire, existing);
- wire->port_output = false;
- }
- }
- }
- else if (type == "box") {
- RTLIL::Cell* cell = module->cell(stringf("$__box%d__", variable));
- if (cell) { // ABC could have optimised this box away
- module->rename(cell, escaped_s);
- RTLIL::Module* box_module = design->module(cell->type);
- log_assert(box_module);
-
- for (const auto &i : cell->connections()) {
- RTLIL::IdString port_name = i.first;
- RTLIL::SigSpec rhs = i.second;
- int index = 0;
- for (auto bit : rhs.bits()) {
- RTLIL::Wire* wire = bit.wire;
- RTLIL::IdString escaped_s = RTLIL::escape_id(stringf("%s.%s", log_id(cell), log_id(port_name)));
- if (index == 0)
- module->rename(wire, escaped_s);
- else if (index > 0) {
- module->rename(wire, stringf("%s[%d]", escaped_s.c_str(), index));
- if (wideports)
- wideports_cache[escaped_s] = std::max(wideports_cache[escaped_s], index);
- }
- index++;
- }
- }
- }
- }
- else
- log_error("Symbol type '%s' not recognised.\n", type.c_str());
- }
- }
-
- for (auto &wp : wideports_cache) {
- auto name = wp.first;
- int width = wp.second + 1;
-
- RTLIL::Wire *wire = module->wire(name);
- if (wire)
- module->rename(wire, RTLIL::escape_id(stringf("%s[%d]", name.c_str(), 0)));
-
- // Do not make ports with a mix of input/output into
- // wide ports
- bool port_input = false, port_output = false;
- for (int i = 0; i < width; i++) {
- RTLIL::IdString other_name = name.str() + stringf("[%d]", i);
- RTLIL::Wire *other_wire = module->wire(other_name);
- if (other_wire) {
- port_input = port_input || other_wire->port_input;
- port_output = port_output || other_wire->port_output;
- }
- }
- if ((port_input && port_output) || (!port_input && !port_output))
- continue;
-
- wire = module->addWire(name, width);
- wire->port_input = port_input;
- wire->port_output = port_output;
-
- for (int i = 0; i < width; i++) {
- RTLIL::IdString other_name = name.str() + stringf("[%d]", i);
- RTLIL::Wire *other_wire = module->wire(other_name);
- if (other_wire) {
- other_wire->port_input = false;
- other_wire->port_output = false;
- if (wire->port_input)
- module->connect(other_wire, SigSpec(wire, i));
- else
- module->connect(SigSpec(wire, i), other_wire);
- }
- }
- }
-
- module->fixup_ports();
- design->add(module);
-
- design->selection_stack.emplace_back(false);
- RTLIL::Selection& sel = design->selection_stack.back();
- sel.select(module);
-
- Pass::call(design, "clean");
-
- design->selection_stack.pop_back();
-
- for (auto cell : module->cells().to_vector()) {
- if (cell->type != "$lut") continue;
- auto y_port = cell->getPort("\\Y").as_bit();
- if (y_port.wire->width == 1)
- module->rename(cell, stringf("%s$lut", y_port.wire->name.c_str()));
- else
- module->rename(cell, stringf("%s[%d]$lut", y_port.wire->name.c_str(), y_port.offset));
- }
++ pool<RTLIL::Module*> abc_carry_modules;
++ unsigned ci_count = 0, co_count = 0, flop_count = 0;
++ for (auto cell : boxes) {
++ RTLIL::Module* box_module = design->module(cell->type);
++ log_assert(box_module);
++
++ if (box_module->attributes.count("\\abc_carry") && !abc_carry_modules.count(box_module)) {
++ RTLIL::Wire* carry_in = nullptr, *carry_out = nullptr;
++ RTLIL::Wire* last_in = nullptr, *last_out = nullptr;
++ for (const auto &port_name : box_module->ports) {
++ RTLIL::Wire* w = box_module->wire(port_name);
++ log_assert(w);
++ if (w->port_input) {
++ if (w->attributes.count("\\abc_carry_in")) {
++ log_assert(!carry_in);
++ carry_in = w;
++ }
++ log_assert(!last_in || last_in->port_id < w->port_id);
++ last_in = w;
++ }
++ if (w->port_output) {
++ if (w->attributes.count("\\abc_carry_out")) {
++ log_assert(!carry_out);
++ carry_out = w;
++ }
++ log_assert(!last_out || last_out->port_id < w->port_id);
++ last_out = w;
++ }
++ }
++
++ if (carry_in != last_in) {
++ std::swap(box_module->ports[carry_in->port_id], box_module->ports[last_in->port_id]);
++ std::swap(carry_in->port_id, last_in->port_id);
++ }
++ if (carry_out != last_out) {
++ log_assert(last_out);
++ std::swap(box_module->ports[carry_out->port_id], box_module->ports[last_out->port_id]);
++ std::swap(carry_out->port_id, last_out->port_id);
++ }
++ }
++
++ bool flop = box_module->attributes.count("\\abc_flop");
++ log_assert(!flop || flop_count < flopNum);
++
++ // NB: Assume box_module->ports are sorted alphabetically
++ // (as RTLIL::Module::fixup_ports() would do)
++ for (auto port_name : box_module->ports) {
++ RTLIL::Wire* w = box_module->wire(port_name);
++ log_assert(w);
++ RTLIL::SigSpec rhs;
++ RTLIL::Wire* wire = nullptr;
++ for (int i = 0; i < GetSize(w); i++) {
++ if (w->port_input) {
++ log_assert(co_count < outputs.size());
++ wire = outputs[co_count++];
++ log_assert(wire);
++ log_assert(wire->port_output);
++ wire->port_output = false;
++
++ if (flop && w->attributes.count("\\abc_flop_d")) {
++ RTLIL::Wire* d = outputs[outputs.size() - flopNum + flop_count];
++ log_assert(d);
++ log_assert(d->port_output);
++ d->port_output = false;
++ }
++ }
++ if (w->port_output) {
++ log_assert((piNum + ci_count) < inputs.size());
++ wire = inputs[piNum + ci_count++];
++ log_assert(wire);
++ log_assert(wire->port_input);
++ wire->port_input = false;
++
++ if (flop && w->attributes.count("\\abc_flop_q")) {
++ wire = inputs[piNum - flopNum + flop_count];
++ log_assert(wire);
++ log_assert(wire->port_input);
++ wire->port_input = false;
++ }
++ }
++ rhs.append(wire);
++ }
++ cell->setPort(port_name, rhs);
++ }
++
++ if (flop) flop_count++;
++ }
++
++ dict<RTLIL::IdString, int> wideports_cache;
++
++ if (!map_filename.empty()) {
++ std::ifstream mf(map_filename);
++ std::string type, symbol;
++ int variable, index;
++ while (mf >> type >> variable >> index >> symbol) {
++ RTLIL::IdString escaped_s = RTLIL::escape_id(symbol);
++ if (type == "input") {
++ log_assert(static_cast<unsigned>(variable) < inputs.size());
++ RTLIL::Wire* wire = inputs[variable];
++ log_assert(wire);
++ log_assert(wire->port_input);
++
++ if (index == 0) {
++ // Cope with the fact that a CI might be identical
++ // to a PI (necessary due to ABC); in those cases
++ // simply connect the latter to the former
++ RTLIL::Wire* existing = module->wire(escaped_s);
++ if (!existing)
++ module->rename(wire, escaped_s);
++ else {
++ wire->port_input = false;
++ module->connect(wire, existing);
++ }
++ }
++ else if (index > 0) {
++ std::string indexed_name = stringf("%s[%d]", escaped_s.c_str(), index);
++ RTLIL::Wire* existing = module->wire(indexed_name);
++ if (!existing) {
++ module->rename(wire, indexed_name);
++ if (wideports)
++ wideports_cache[escaped_s] = std::max(wideports_cache[escaped_s], index);
++ }
++ else {
++ module->connect(wire, existing);
++ wire->port_input = false;
++ }
++ }
++ }
++ else if (type == "output") {
++ log_assert(static_cast<unsigned>(variable + co_count) < outputs.size());
++ RTLIL::Wire* wire = outputs[variable + co_count];
++ log_assert(wire);
++ log_assert(wire->port_output);
++ if (escaped_s.in("\\__dummy_o__", "\\__const0__", "\\__const1__")) {
++ wire->port_output = false;
++ continue;
++ }
++
++ if (index == 0) {
++ // Cope with the fact that a CO might be identical
++ // to a PO (necessary due to ABC); in those cases
++ // simply connect the latter to the former
++ RTLIL::Wire* existing = module->wire(escaped_s);
++ if (!existing) {
++ if (escaped_s.ends_with("$inout.out")) {
++ wire->port_output = false;
++ RTLIL::Wire *in_wire = module->wire(escaped_s.substr(0, escaped_s.size()-10));
++ log_assert(in_wire);
++ log_assert(in_wire->port_input && !in_wire->port_output);
++ in_wire->port_output = true;
++ module->connect(in_wire, wire);
++ }
++ else
++ module->rename(wire, escaped_s);
++ }
++ else {
++ wire->port_output = false;
++ module->connect(wire, existing);
++ }
++ }
++ else if (index > 0) {
++ std::string indexed_name = stringf("%s[%d]", escaped_s.c_str(), index);
++ RTLIL::Wire* existing = module->wire(indexed_name);
++ if (!existing) {
++ if (escaped_s.ends_with("$inout.out")) {
++ wire->port_output = false;
++ RTLIL::Wire *in_wire = module->wire(stringf("%s[%d]", escaped_s.substr(0, escaped_s.size()-10).c_str(), index));
++ log_assert(in_wire);
++ log_assert(in_wire->port_input && !in_wire->port_output);
++ in_wire->port_output = true;
++ module->connect(in_wire, wire);
++ }
++ else {
++ module->rename(wire, indexed_name);
++ if (wideports)
++ wideports_cache[escaped_s] = std::max(wideports_cache[escaped_s], index);
++ }
++ }
++ else {
++ module->connect(wire, existing);
++ wire->port_output = false;
++ }
++ }
++ }
++ else if (type == "box") {
++ RTLIL::Cell* cell = module->cell(stringf("$__box%d__", variable));
++ if (cell) { // ABC could have optimised this box away
++ module->rename(cell, escaped_s);
++ RTLIL::Module* box_module = design->module(cell->type);
++ log_assert(box_module);
++
++ for (const auto &i : cell->connections()) {
++ RTLIL::IdString port_name = i.first;
++ RTLIL::SigSpec rhs = i.second;
++ int index = 0;
++ for (auto bit : rhs.bits()) {
++ RTLIL::Wire* wire = bit.wire;
++ RTLIL::IdString escaped_s = RTLIL::escape_id(stringf("%s.%s", log_id(cell), log_id(port_name)));
++ if (index == 0)
++ module->rename(wire, escaped_s);
++ else if (index > 0) {
++ module->rename(wire, stringf("%s[%d]", escaped_s.c_str(), index));
++ if (wideports)
++ wideports_cache[escaped_s] = std::max(wideports_cache[escaped_s], index);
++ }
++ index++;
++ }
++ }
++ }
++ }
++ else
++ log_error("Symbol type '%s' not recognised.\n", type.c_str());
++ }
++ }
++
++ for (auto &wp : wideports_cache) {
++ auto name = wp.first;
++ int width = wp.second + 1;
++
++ RTLIL::Wire *wire = module->wire(name);
++ if (wire)
++ module->rename(wire, RTLIL::escape_id(stringf("%s[%d]", name.c_str(), 0)));
++
++ // Do not make ports with a mix of input/output into
++ // wide ports
++ bool port_input = false, port_output = false;
++ for (int i = 0; i < width; i++) {
++ RTLIL::IdString other_name = name.str() + stringf("[%d]", i);
++ RTLIL::Wire *other_wire = module->wire(other_name);
++ if (other_wire) {
++ port_input = port_input || other_wire->port_input;
++ port_output = port_output || other_wire->port_output;
++ }
++ }
++ if ((port_input && port_output) || (!port_input && !port_output))
++ continue;
++
++ wire = module->addWire(name, width);
++ wire->port_input = port_input;
++ wire->port_output = port_output;
++
++ for (int i = 0; i < width; i++) {
++ RTLIL::IdString other_name = name.str() + stringf("[%d]", i);
++ RTLIL::Wire *other_wire = module->wire(other_name);
++ if (other_wire) {
++ other_wire->port_input = false;
++ other_wire->port_output = false;
++ if (wire->port_input)
++ module->connect(other_wire, SigSpec(wire, i));
++ else
++ module->connect(SigSpec(wire, i), other_wire);
++ }
++ }
++ }
++
++ module->fixup_ports();
++ design->add(module);
++
++ design->selection_stack.emplace_back(false);
++ RTLIL::Selection& sel = design->selection_stack.back();
++ sel.select(module);
++
++ Pass::call(design, "clean");
++
++ design->selection_stack.pop_back();
+
- RTLIL::Cell *and_cell = module->addCell(NEW_ID, "$_AND_");
- and_cell->setPort("\\A", i1_wire);
- and_cell->setPort("\\B", i2_wire);
- and_cell->setPort("\\Y", o_wire);
++ for (auto cell : module->cells().to_vector()) {
++ if (cell->type != "$lut") continue;
++ auto y_port = cell->getPort("\\Y").as_bit();
++ if (y_port.wire->width == 1)
++ module->rename(cell, stringf("%s$lut", y_port.wire->name.c_str()));
++ else
++ module->rename(cell, stringf("%s[%d]$lut", y_port.wire->name.c_str(), y_port.offset));
+ }
}
struct AigerFrontend : public Frontend {
- AigerFrontend() : Frontend("aiger", "read AIGER file") { }
- void help() YS_OVERRIDE
- {
- // |---v---|---v---|---v---|---v---|---v---|---v---|---v---|---v---|---v---|---v---|
- log("\n");
- log(" read_aiger [options] [filename]\n");
- log("\n");
- log("Load module from an AIGER file into the current design.\n");
- log("\n");
- log(" -module_name <module_name>\n");
- log(" Name of module to be created (default: <filename>)\n");
- log("\n");
- log(" -clk_name <wire_name>\n");
- log(" AIGER latches to be transformed into posedge DFFs clocked by wire of");
- log(" this name (default: clk)\n");
- log("\n");
- log(" -map <filename>\n");
- log(" read file with port and latch symbols\n");
- log("\n");
- log(" -wideports\n");
- log(" Merge ports that match the pattern 'name[int]' into a single\n");
- log(" multi-bit port 'name'.\n");
- log("\n");
- }
- void execute(std::istream *&f, std::string filename, std::vector<std::string> args, RTLIL::Design *design) YS_OVERRIDE
- {
- log_header(design, "Executing AIGER frontend.\n");
-
- RTLIL::IdString clk_name = "\\clk";
- RTLIL::IdString module_name;
- std::string map_filename;
- bool wideports = false;
-
- size_t argidx;
- for (argidx = 1; argidx < args.size(); argidx++) {
- std::string arg = args[argidx];
- if (arg == "-module_name" && argidx+1 < args.size()) {
- module_name = RTLIL::escape_id(args[++argidx]);
- continue;
- }
- if (arg == "-clk_name" && argidx+1 < args.size()) {
- clk_name = RTLIL::escape_id(args[++argidx]);
- continue;
- }
- if (map_filename.empty() && arg == "-map" && argidx+1 < args.size()) {
- map_filename = args[++argidx];
- continue;
- }
- if (arg == "-wideports") {
- wideports = true;
- continue;
- }
- break;
- }
- extra_args(f, filename, args, argidx);
-
- if (module_name.empty()) {
+ AigerFrontend() : Frontend("aiger", "read AIGER file") { }
+ void help() YS_OVERRIDE
+ {
+ // |---v---|---v---|---v---|---v---|---v---|---v---|---v---|---v---|---v---|---v---|
+ log("\n");
+ log(" read_aiger [options] [filename]\n");
+ log("\n");
+ log("Load module from an AIGER file into the current design.\n");
+ log("\n");
+ log(" -module_name <module_name>\n");
- log(" Name of module to be created (default: "
-#ifdef _WIN32
- "top" // FIXME
-#else
- "<filename>"
-#endif
- ")\n");
++ log(" Name of module to be created (default: <filename>)\n");
+ log("\n");
+ log(" -clk_name <wire_name>\n");
+ log(" AIGER latches to be transformed into posedge DFFs clocked by wire of");
+ log(" this name (default: clk)\n");
+ log("\n");
++ log(" -map <filename>\n");
++ log(" read file with port and latch symbols\n");
++ log("\n");
++ log(" -wideports\n");
++ log(" Merge ports that match the pattern 'name[int]' into a single\n");
++ log(" multi-bit port 'name'.\n");
++ log("\n");
+ }
+ void execute(std::istream *&f, std::string filename, std::vector<std::string> args, RTLIL::Design *design) YS_OVERRIDE
+ {
+ log_header(design, "Executing AIGER frontend.\n");
+
+ RTLIL::IdString clk_name = "\\clk";
+ RTLIL::IdString module_name;
++ std::string map_filename;
++ bool wideports = false;
+
+ size_t argidx;
+ for (argidx = 1; argidx < args.size(); argidx++) {
+ std::string arg = args[argidx];
+ if (arg == "-module_name" && argidx+1 < args.size()) {
+ module_name = RTLIL::escape_id(args[++argidx]);
+ continue;
+ }
+ if (arg == "-clk_name" && argidx+1 < args.size()) {
+ clk_name = RTLIL::escape_id(args[++argidx]);
+ continue;
+ }
++ if (map_filename.empty() && arg == "-map" && argidx+1 < args.size()) {
++ map_filename = args[++argidx];
++ continue;
++ }
++ if (arg == "-wideports") {
++ wideports = true;
++ continue;
++ }
+ break;
+ }
+ extra_args(f, filename, args, argidx);
+
+ if (module_name.empty()) {
#ifdef _WIN32
- char fname[_MAX_FNAME];
- _splitpath(filename.c_str(), NULL /* drive */, NULL /* dir */, fname, NULL /* ext */)
- module_name = fname;
- module_name = "top"; // FIXME: basename equivalent on Win32?
++ char fname[_MAX_FNAME];
++ _splitpath(filename.c_str(), NULL /* drive */, NULL /* dir */, fname, NULL /* ext */)
++ module_name = fname;
#else
- char* bn = strdup(filename.c_str());
- module_name = RTLIL::escape_id(bn);
- free(bn);
+ char* bn = strdup(filename.c_str());
+ module_name = RTLIL::escape_id(bn);
+ free(bn);
#endif
- }
+ }
- AigerReader reader(design, *f, module_name, clk_name, map_filename, wideports);
- reader.parse_aiger();
- }
- AigerReader reader(design, *f, module_name, clk_name);
++ AigerReader reader(design, *f, module_name, clk_name, map_filename, wideports);
+ reader.parse_aiger();
+ }
} AigerFrontend;
YOSYS_NAMESPACE_END
projects / yosys.git / commitdiff