+2008-05-02 Jim Blandy <jimb@codesourcery.com>
+ Pedro Alves <pedro@codesourcery.com>
+
+ Implement displaced stepping.
+
+ * gdbarch.sh (max_insn_length): New 'variable'.
+ (displaced_step_copy, displaced_step_fixup)
+ (displaced_step_free_closure, displaced_step_location): New
+ functions.
+ (struct displaced_step_closure): Add forward declaration.
+ * gdbarch.c, gdbarch.h: Regenerated.
+
+ * arch-utils.c: #include "objfiles.h".
+ (simple_displaced_step_copy_insn)
+ (simple_displaced_step_free_closure)
+ (displaced_step_at_entry_point): New functions.
+ * arch-utils.h (simple_displaced_step_copy_insn)
+ (simple_displaced_step_free_closure)
+ (displaced_step_at_entry_point): New prototypes.
+
+ * i386-tdep.c (I386_MAX_INSN_LEN): Rename to...
+ (I386_MAX_MATCHED_INSN_LEN): ... this.
+ (i386_absolute_jmp_p, i386_absolute_call_p)
+ (i386_ret_p, i386_call_p, i386_breakpoint_p, i386_syscall_p)
+ (i386_displaced_step_fixup): New functions.
+ (struct i386_insn, i386_match_insn): Update.
+ (i386_gdbarch_init): Set gdbarch_max_insn_length.
+ * i386-tdep.h (I386_MAX_INSN_LEN): New.
+ (i386_displaced_step_fixup): New prototype.
+ * i386-linux-tdep.c (i386_linux_init_abi): Include "arch-utils.h".
+ Register gdbarch_displaced_step_copy,
+ gdbarch_displaced_step_fixup, gdbarch_displaced_step_free_closure,
+ and gdbarch_displaced_step_location functions.
+
+ * infrun.c (debug_displaced): New variable.
+ (show_debug_displaced): New function.
+ (struct displaced_step_request): New struct.
+ (displaced_step_request_queue, displaced_step_ptid)
+ (displaced_step_gdbarch, displaced_step_closure)
+ (displaced_step_original, displaced_step_copy)
+ (displaced_step_saved_copy, can_use_displaced_stepping): New
+ variables.
+ (show_can_use_displaced_stepping, use_displaced_stepping)
+ (displaced_step_clear, cleanup_displaced_step_closure)
+ (displaced_step_dump_bytes, displaced_step_prepare)
+ (displaced_step_clear_cleanup, write_memory_ptid)
+ (displaced_step_fixup): New functions.
+ (resume): Call displaced_step_prepare.
+ (proceed): Call read_pc once, and remember the value. If using
+ displaced stepping, don't remove breakpoints.
+ (handle_inferior_event): Call displaced_step_fixup. Add some
+ debugging output. When we try to step over a breakpoint, but get
+ a signal to deliver to the thread instead, ensure the step-resume
+ breakpoint is actually inserted. If a thread hop is needed, and
+ displaced stepping is enabled, don't remove breakpoints.
+ (init_wait_for_inferior): Call displaced_step_clear.
+ (_initialize_infrun): Add "set debug displaced" command. Add
+ "maint set can-use-displaced-stepping" command. Clear
+ displaced_step_ptid.
+ * inferior.h (debug_displaced): Declare variable.
+ (displaced_step_dump_bytes): Declare function.
+
+ * Makefile.in (arch-utils.o, i386-linux-tdep.o): Update
+ dependencies.
+
2008-05-02 Daniel Jacobowitz <dan@codesourcery.com>
* arm-tdep.c (arm_mode_strings, arm_fallback_mode_string)
arch-utils.o: arch-utils.c $(defs_h) $(arch_utils_h) $(buildsym_h) \
$(gdbcmd_h) $(inferior_h) $(gdb_string_h) $(regcache_h) \
$(gdb_assert_h) $(sim_regno_h) $(gdbcore_h) $(osabi_h) $(version_h) \
- $(floatformat_h) $(target_descriptions_h)
+ $(floatformat_h) $(target_descriptions_h) $(objfiles_h)
arm-linux-nat.o: arm-linux-nat.c $(defs_h) $(inferior_h) $(gdbcore_h) \
$(gdb_string_h) $(regcache_h) $(arm_tdep_h) $(gregset_h) \
$(target_h) $(linux_nat_h) $(gdb_proc_service_h) $(arm_linux_tdep_h) \
i386-linux-tdep.o: i386-linux-tdep.c $(defs_h) $(gdbcore_h) $(frame_h) \
$(value_h) $(regcache_h) $(inferior_h) $(osabi_h) $(reggroups_h) \
$(dwarf2_frame_h) $(gdb_string_h) $(i386_tdep_h) \
- $(i386_linux_tdep_h) $(glibc_tdep_h) $(solib_svr4_h) $(symtab_h)
+ $(i386_linux_tdep_h) $(glibc_tdep_h) $(solib_svr4_h) $(symtab_h) \
+ $(arch_utils_h)
i386-nat.o: i386-nat.c $(defs_h) $(breakpoint_h) $(command_h) $(gdbcmd_h) \
$(target_h)
i386nbsd-nat.o: i386nbsd-nat.c $(defs_h) $(gdbcore_h) $(regcache_h) \
#include "gdbcore.h"
#include "osabi.h"
#include "target-descriptions.h"
+#include "objfiles.h"
#include "version.h"
#include "floatformat.h"
+struct displaced_step_closure *
+simple_displaced_step_copy_insn (struct gdbarch *gdbarch,
+ CORE_ADDR from, CORE_ADDR to,
+ struct regcache *regs)
+{
+ size_t len = gdbarch_max_insn_length (gdbarch);
+ gdb_byte *buf = xmalloc (len);
+
+ read_memory (from, buf, len);
+ write_memory (to, buf, len);
+
+ if (debug_displaced)
+ {
+ fprintf_unfiltered (gdb_stdlog, "displaced: copy 0x%s->0x%s: ",
+ paddr_nz (from), paddr_nz (to));
+ displaced_step_dump_bytes (gdb_stdlog, buf, len);
+ }
+
+ return (struct displaced_step_closure *) buf;
+}
+
+
+void
+simple_displaced_step_free_closure (struct gdbarch *gdbarch,
+ struct displaced_step_closure *closure)
+{
+ xfree (closure);
+}
+
+
+CORE_ADDR
+displaced_step_at_entry_point (struct gdbarch *gdbarch)
+{
+ CORE_ADDR addr;
+ int bp_len;
+
+ addr = entry_point_address ();
+
+ /* Make certain that the address points at real code, and not a
+ function descriptor. */
+ addr = gdbarch_convert_from_func_ptr_addr (gdbarch, addr, ¤t_target);
+
+ /* Inferior calls also use the entry point as a breakpoint location.
+ We don't want displaced stepping to interfere with those
+ breakpoints, so leave space. */
+ gdbarch_breakpoint_from_pc (gdbarch, &addr, &bp_len);
+ addr += bp_len * 2;
+
+ return addr;
+}
+
int
legacy_register_sim_regno (struct gdbarch *gdbarch, int regnum)
{
/* gdbarch trace variable */
extern int gdbarch_debug;
+/* An implementation of gdbarch_displaced_step_copy_insn for
+ processors that don't need to modify the instruction before
+ single-stepping the displaced copy.
+
+ Simply copy gdbarch_max_insn_length (ARCH) bytes from FROM to TO.
+ The closure is an array of that many bytes containing the
+ instruction's bytes, allocated with xmalloc. */
+extern struct displaced_step_closure *
+ simple_displaced_step_copy_insn (struct gdbarch *gdbarch,
+ CORE_ADDR from, CORE_ADDR to,
+ struct regcache *regs);
+
+/* Simple implementation of gdbarch_displaced_step_free_closure: Call
+ xfree.
+ This is appropriate for use with simple_displaced_step_copy_insn. */
+extern void
+ simple_displaced_step_free_closure (struct gdbarch *gdbarch,
+ struct displaced_step_closure *closure);
+
+/* Possible value for gdbarch_displaced_step_location:
+ Place displaced instructions at the program's entry point,
+ leaving space for inferior function call return breakpoints. */
+extern CORE_ADDR displaced_step_at_entry_point (struct gdbarch *gdbarch);
+
/* The only possible cases for inner_than. */
extern int core_addr_lessthan (CORE_ADDR lhs, CORE_ADDR rhs);
extern int core_addr_greaterthan (CORE_ADDR lhs, CORE_ADDR rhs);
+2008-05-02 Pedro Alves <pedro@codesourcery.com>
+
+ * gdb.texinfo (Debugging Output): Document "set/show debug
+ displaced".
+ (Maintenance Commands): Document "maint set/show
+ can-use-displaced-stepping".
+
2008-05-02 Daniel Jacobowitz <dan@codesourcery.com>
* gdb.texinfo (ARM): Document set/show arm fallback-mode
module.
@item show debug aix-thread
Show the current state of AIX thread debugging info display.
+@item set debug displaced
+@cindex displaced stepping debugging info
+Turns on or off display of @value{GDBN} debugging info for the
+displaced stepping support. The default is off.
+@item show debug displaced
+Displays the current state of displaying @value{GDBN} debugging info
+related to displaced stepping.
@item set debug event
@cindex event debugging info
Turns on or off display of @value{GDBN} event debugging info. The
@end table
+@kindex maint set can-use-displaced-stepping
+@kindex maint show can-use-displaced-stepping
+@cindex displaced stepping support
+@cindex out-of-line single-stepping
+@item maint set can-use-displaced-stepping
+@itemx maint show can-use-displaced-stepping
+Control whether or not @value{GDBN} will do @dfn{displaced stepping}
+if the target supports it. The default is on. Displaced stepping is
+a way to single-step over breakpoints without removing them from the
+inferior, by executing an out-of-line copy of the instruction that was
+originally at the breakpoint location. It is also known as
+out-of-line single-stepping.
+
@kindex maint check-symtabs
@item maint check-symtabs
Check the consistency of psymtabs and symtabs.
int vtable_function_descriptors;
int vbit_in_delta;
gdbarch_skip_permanent_breakpoint_ftype *skip_permanent_breakpoint;
+ ULONGEST max_insn_length;
+ gdbarch_displaced_step_copy_insn_ftype *displaced_step_copy_insn;
+ gdbarch_displaced_step_fixup_ftype *displaced_step_fixup;
+ gdbarch_displaced_step_free_closure_ftype *displaced_step_free_closure;
+ gdbarch_displaced_step_location_ftype *displaced_step_location;
gdbarch_overlay_update_ftype *overlay_update;
gdbarch_core_read_description_ftype *core_read_description;
gdbarch_static_transform_name_ftype *static_transform_name;
0, /* vtable_function_descriptors */
0, /* vbit_in_delta */
0, /* skip_permanent_breakpoint */
+ 0, /* max_insn_length */
+ 0, /* displaced_step_copy_insn */
+ 0, /* displaced_step_fixup */
+ NULL, /* displaced_step_free_closure */
+ NULL, /* displaced_step_location */
0, /* overlay_update */
0, /* core_read_description */
0, /* static_transform_name */
gdbarch->coff_make_msymbol_special = default_coff_make_msymbol_special;
gdbarch->name_of_malloc = "malloc";
gdbarch->register_reggroup_p = default_register_reggroup_p;
+ gdbarch->displaced_step_fixup = NULL;
+ gdbarch->displaced_step_free_closure = NULL;
+ gdbarch->displaced_step_location = NULL;
gdbarch->target_signal_from_host = default_target_signal_from_host;
gdbarch->target_signal_to_host = default_target_signal_to_host;
/* gdbarch_alloc() */
/* Skip verify of vtable_function_descriptors, invalid_p == 0 */
/* Skip verify of vbit_in_delta, invalid_p == 0 */
/* Skip verify of skip_permanent_breakpoint, has predicate */
+ /* Skip verify of max_insn_length, has predicate */
+ /* Skip verify of displaced_step_copy_insn, has predicate */
+ /* Skip verify of displaced_step_fixup, has predicate */
+ if ((! gdbarch->displaced_step_free_closure) != (! gdbarch->displaced_step_copy_insn))
+ fprintf_unfiltered (log, "\n\tdisplaced_step_free_closure");
+ if ((! gdbarch->displaced_step_location) != (! gdbarch->displaced_step_copy_insn))
+ fprintf_unfiltered (log, "\n\tdisplaced_step_location");
/* Skip verify of overlay_update, has predicate */
/* Skip verify of core_read_description, has predicate */
/* Skip verify of static_transform_name, has predicate */
fprintf_unfiltered (file,
"gdbarch_dump: deprecated_function_start_offset = 0x%s\n",
paddr_nz (gdbarch->deprecated_function_start_offset));
+ fprintf_unfiltered (file,
+ "gdbarch_dump: gdbarch_displaced_step_copy_insn_p() = %d\n",
+ gdbarch_displaced_step_copy_insn_p (gdbarch));
+ fprintf_unfiltered (file,
+ "gdbarch_dump: displaced_step_copy_insn = <0x%lx>\n",
+ (long) gdbarch->displaced_step_copy_insn);
+ fprintf_unfiltered (file,
+ "gdbarch_dump: gdbarch_displaced_step_fixup_p() = %d\n",
+ gdbarch_displaced_step_fixup_p (gdbarch));
+ fprintf_unfiltered (file,
+ "gdbarch_dump: displaced_step_fixup = <0x%lx>\n",
+ (long) gdbarch->displaced_step_fixup);
+ fprintf_unfiltered (file,
+ "gdbarch_dump: displaced_step_free_closure = <0x%lx>\n",
+ (long) gdbarch->displaced_step_free_closure);
+ fprintf_unfiltered (file,
+ "gdbarch_dump: displaced_step_location = <0x%lx>\n",
+ (long) gdbarch->displaced_step_location);
fprintf_unfiltered (file,
"gdbarch_dump: double_bit = %s\n",
paddr_d (gdbarch->double_bit));
fprintf_unfiltered (file,
"gdbarch_dump: long_long_bit = %s\n",
paddr_d (gdbarch->long_long_bit));
+ fprintf_unfiltered (file,
+ "gdbarch_dump: gdbarch_max_insn_length_p() = %d\n",
+ gdbarch_max_insn_length_p (gdbarch));
+ fprintf_unfiltered (file,
+ "gdbarch_dump: max_insn_length = %s\n",
+ paddr_d (gdbarch->max_insn_length));
fprintf_unfiltered (file,
"gdbarch_dump: memory_insert_breakpoint = <0x%lx>\n",
(long) gdbarch->memory_insert_breakpoint);
gdbarch->skip_permanent_breakpoint = skip_permanent_breakpoint;
}
+int
+gdbarch_max_insn_length_p (struct gdbarch *gdbarch)
+{
+ gdb_assert (gdbarch != NULL);
+ return gdbarch->max_insn_length != 0;
+}
+
+ULONGEST
+gdbarch_max_insn_length (struct gdbarch *gdbarch)
+{
+ gdb_assert (gdbarch != NULL);
+ /* Check variable changed from pre-default. */
+ gdb_assert (gdbarch->max_insn_length != 0);
+ if (gdbarch_debug >= 2)
+ fprintf_unfiltered (gdb_stdlog, "gdbarch_max_insn_length called\n");
+ return gdbarch->max_insn_length;
+}
+
+void
+set_gdbarch_max_insn_length (struct gdbarch *gdbarch,
+ ULONGEST max_insn_length)
+{
+ gdbarch->max_insn_length = max_insn_length;
+}
+
+int
+gdbarch_displaced_step_copy_insn_p (struct gdbarch *gdbarch)
+{
+ gdb_assert (gdbarch != NULL);
+ return gdbarch->displaced_step_copy_insn != NULL;
+}
+
+struct displaced_step_closure *
+gdbarch_displaced_step_copy_insn (struct gdbarch *gdbarch, CORE_ADDR from, CORE_ADDR to, struct regcache *regs)
+{
+ gdb_assert (gdbarch != NULL);
+ gdb_assert (gdbarch->displaced_step_copy_insn != NULL);
+ if (gdbarch_debug >= 2)
+ fprintf_unfiltered (gdb_stdlog, "gdbarch_displaced_step_copy_insn called\n");
+ return gdbarch->displaced_step_copy_insn (gdbarch, from, to, regs);
+}
+
+void
+set_gdbarch_displaced_step_copy_insn (struct gdbarch *gdbarch,
+ gdbarch_displaced_step_copy_insn_ftype displaced_step_copy_insn)
+{
+ gdbarch->displaced_step_copy_insn = displaced_step_copy_insn;
+}
+
+int
+gdbarch_displaced_step_fixup_p (struct gdbarch *gdbarch)
+{
+ gdb_assert (gdbarch != NULL);
+ return gdbarch->displaced_step_fixup != NULL;
+}
+
+void
+gdbarch_displaced_step_fixup (struct gdbarch *gdbarch, struct displaced_step_closure *closure, CORE_ADDR from, CORE_ADDR to, struct regcache *regs)
+{
+ gdb_assert (gdbarch != NULL);
+ gdb_assert (gdbarch->displaced_step_fixup != NULL);
+ /* Do not check predicate: gdbarch->displaced_step_fixup != NULL, allow call. */
+ if (gdbarch_debug >= 2)
+ fprintf_unfiltered (gdb_stdlog, "gdbarch_displaced_step_fixup called\n");
+ gdbarch->displaced_step_fixup (gdbarch, closure, from, to, regs);
+}
+
+void
+set_gdbarch_displaced_step_fixup (struct gdbarch *gdbarch,
+ gdbarch_displaced_step_fixup_ftype displaced_step_fixup)
+{
+ gdbarch->displaced_step_fixup = displaced_step_fixup;
+}
+
+void
+gdbarch_displaced_step_free_closure (struct gdbarch *gdbarch, struct displaced_step_closure *closure)
+{
+ gdb_assert (gdbarch != NULL);
+ gdb_assert (gdbarch->displaced_step_free_closure != NULL);
+ if (gdbarch_debug >= 2)
+ fprintf_unfiltered (gdb_stdlog, "gdbarch_displaced_step_free_closure called\n");
+ gdbarch->displaced_step_free_closure (gdbarch, closure);
+}
+
+void
+set_gdbarch_displaced_step_free_closure (struct gdbarch *gdbarch,
+ gdbarch_displaced_step_free_closure_ftype displaced_step_free_closure)
+{
+ gdbarch->displaced_step_free_closure = displaced_step_free_closure;
+}
+
+CORE_ADDR
+gdbarch_displaced_step_location (struct gdbarch *gdbarch)
+{
+ gdb_assert (gdbarch != NULL);
+ gdb_assert (gdbarch->displaced_step_location != NULL);
+ if (gdbarch_debug >= 2)
+ fprintf_unfiltered (gdb_stdlog, "gdbarch_displaced_step_location called\n");
+ return gdbarch->displaced_step_location (gdbarch);
+}
+
+void
+set_gdbarch_displaced_step_location (struct gdbarch *gdbarch,
+ gdbarch_displaced_step_location_ftype displaced_step_location)
+{
+ gdbarch->displaced_step_location = displaced_step_location;
+}
+
int
gdbarch_overlay_update_p (struct gdbarch *gdbarch)
{
struct obstack;
struct bp_target_info;
struct target_desc;
+struct displaced_step_closure;
extern struct gdbarch *current_gdbarch;
extern void gdbarch_skip_permanent_breakpoint (struct gdbarch *gdbarch, struct regcache *regcache);
extern void set_gdbarch_skip_permanent_breakpoint (struct gdbarch *gdbarch, gdbarch_skip_permanent_breakpoint_ftype *skip_permanent_breakpoint);
+/* The maximum length of an instruction on this architecture. */
+
+extern int gdbarch_max_insn_length_p (struct gdbarch *gdbarch);
+
+extern ULONGEST gdbarch_max_insn_length (struct gdbarch *gdbarch);
+extern void set_gdbarch_max_insn_length (struct gdbarch *gdbarch, ULONGEST max_insn_length);
+
+/* Copy the instruction at FROM to TO, and make any adjustments
+ necessary to single-step it at that address.
+
+ REGS holds the state the thread's registers will have before
+ executing the copied instruction; the PC in REGS will refer to FROM,
+ not the copy at TO. The caller should update it to point at TO later.
+
+ Return a pointer to data of the architecture's choice to be passed
+ to gdbarch_displaced_step_fixup. Or, return NULL to indicate that
+ the instruction's effects have been completely simulated, with the
+ resulting state written back to REGS.
+
+ For a general explanation of displaced stepping and how GDB uses it,
+ see the comments in infrun.c.
+
+ The TO area is only guaranteed to have space for
+ gdbarch_max_insn_length (arch) bytes, so this function must not
+ write more bytes than that to that area.
+
+ If you do not provide this function, GDB assumes that the
+ architecture does not support displaced stepping.
+
+ If your architecture doesn't need to adjust instructions before
+ single-stepping them, consider using simple_displaced_step_copy_insn
+ here. */
+
+extern int gdbarch_displaced_step_copy_insn_p (struct gdbarch *gdbarch);
+
+typedef struct displaced_step_closure * (gdbarch_displaced_step_copy_insn_ftype) (struct gdbarch *gdbarch, CORE_ADDR from, CORE_ADDR to, struct regcache *regs);
+extern struct displaced_step_closure * gdbarch_displaced_step_copy_insn (struct gdbarch *gdbarch, CORE_ADDR from, CORE_ADDR to, struct regcache *regs);
+extern void set_gdbarch_displaced_step_copy_insn (struct gdbarch *gdbarch, gdbarch_displaced_step_copy_insn_ftype *displaced_step_copy_insn);
+
+/* Fix up the state resulting from successfully single-stepping a
+ displaced instruction, to give the result we would have gotten from
+ stepping the instruction in its original location.
+
+ REGS is the register state resulting from single-stepping the
+ displaced instruction.
+
+ CLOSURE is the result from the matching call to
+ gdbarch_displaced_step_copy_insn.
+
+ If you provide gdbarch_displaced_step_copy_insn.but not this
+ function, then GDB assumes that no fixup is needed after
+ single-stepping the instruction.
+
+ For a general explanation of displaced stepping and how GDB uses it,
+ see the comments in infrun.c. */
+
+extern int gdbarch_displaced_step_fixup_p (struct gdbarch *gdbarch);
+
+typedef void (gdbarch_displaced_step_fixup_ftype) (struct gdbarch *gdbarch, struct displaced_step_closure *closure, CORE_ADDR from, CORE_ADDR to, struct regcache *regs);
+extern void gdbarch_displaced_step_fixup (struct gdbarch *gdbarch, struct displaced_step_closure *closure, CORE_ADDR from, CORE_ADDR to, struct regcache *regs);
+extern void set_gdbarch_displaced_step_fixup (struct gdbarch *gdbarch, gdbarch_displaced_step_fixup_ftype *displaced_step_fixup);
+
+/* Free a closure returned by gdbarch_displaced_step_copy_insn.
+
+ If you provide gdbarch_displaced_step_copy_insn, you must provide
+ this function as well.
+
+ If your architecture uses closures that don't need to be freed, then
+ you can use simple_displaced_step_free_closure here.
+
+ For a general explanation of displaced stepping and how GDB uses it,
+ see the comments in infrun.c. */
+
+typedef void (gdbarch_displaced_step_free_closure_ftype) (struct gdbarch *gdbarch, struct displaced_step_closure *closure);
+extern void gdbarch_displaced_step_free_closure (struct gdbarch *gdbarch, struct displaced_step_closure *closure);
+extern void set_gdbarch_displaced_step_free_closure (struct gdbarch *gdbarch, gdbarch_displaced_step_free_closure_ftype *displaced_step_free_closure);
+
+/* Return the address of an appropriate place to put displaced
+ instructions while we step over them. There need only be one such
+ place, since we're only stepping one thread over a breakpoint at a
+ time.
+
+ For a general explanation of displaced stepping and how GDB uses it,
+ see the comments in infrun.c. */
+
+typedef CORE_ADDR (gdbarch_displaced_step_location_ftype) (struct gdbarch *gdbarch);
+extern CORE_ADDR gdbarch_displaced_step_location (struct gdbarch *gdbarch);
+extern void set_gdbarch_displaced_step_location (struct gdbarch *gdbarch, gdbarch_displaced_step_location_ftype *displaced_step_location);
+
/* Refresh overlay mapped state for section OSECT. */
extern int gdbarch_overlay_update_p (struct gdbarch *gdbarch);
# Advance PC to next instruction in order to skip a permanent breakpoint.
F:void:skip_permanent_breakpoint:struct regcache *regcache:regcache
+# The maximum length of an instruction on this architecture.
+V:ULONGEST:max_insn_length:::0:0
+
+# Copy the instruction at FROM to TO, and make any adjustments
+# necessary to single-step it at that address.
+#
+# REGS holds the state the thread's registers will have before
+# executing the copied instruction; the PC in REGS will refer to FROM,
+# not the copy at TO. The caller should update it to point at TO later.
+#
+# Return a pointer to data of the architecture's choice to be passed
+# to gdbarch_displaced_step_fixup. Or, return NULL to indicate that
+# the instruction's effects have been completely simulated, with the
+# resulting state written back to REGS.
+#
+# For a general explanation of displaced stepping and how GDB uses it,
+# see the comments in infrun.c.
+#
+# The TO area is only guaranteed to have space for
+# gdbarch_max_insn_length (arch) bytes, so this function must not
+# write more bytes than that to that area.
+#
+# If you do not provide this function, GDB assumes that the
+# architecture does not support displaced stepping.
+#
+# If your architecture doesn't need to adjust instructions before
+# single-stepping them, consider using simple_displaced_step_copy_insn
+# here.
+M:struct displaced_step_closure *:displaced_step_copy_insn:CORE_ADDR from, CORE_ADDR to, struct regcache *regs:from, to, regs
+
+# Fix up the state resulting from successfully single-stepping a
+# displaced instruction, to give the result we would have gotten from
+# stepping the instruction in its original location.
+#
+# REGS is the register state resulting from single-stepping the
+# displaced instruction.
+#
+# CLOSURE is the result from the matching call to
+# gdbarch_displaced_step_copy_insn.
+#
+# If you provide gdbarch_displaced_step_copy_insn.but not this
+# function, then GDB assumes that no fixup is needed after
+# single-stepping the instruction.
+#
+# For a general explanation of displaced stepping and how GDB uses it,
+# see the comments in infrun.c.
+M:void:displaced_step_fixup:struct displaced_step_closure *closure, CORE_ADDR from, CORE_ADDR to, struct regcache *regs:closure, from, to, regs::NULL
+
+# Free a closure returned by gdbarch_displaced_step_copy_insn.
+#
+# If you provide gdbarch_displaced_step_copy_insn, you must provide
+# this function as well.
+#
+# If your architecture uses closures that don't need to be freed, then
+# you can use simple_displaced_step_free_closure here.
+#
+# For a general explanation of displaced stepping and how GDB uses it,
+# see the comments in infrun.c.
+m:void:displaced_step_free_closure:struct displaced_step_closure *closure:closure::NULL::(! gdbarch->displaced_step_free_closure) != (! gdbarch->displaced_step_copy_insn)
+
+# Return the address of an appropriate place to put displaced
+# instructions while we step over them. There need only be one such
+# place, since we're only stepping one thread over a breakpoint at a
+# time.
+#
+# For a general explanation of displaced stepping and how GDB uses it,
+# see the comments in infrun.c.
+m:CORE_ADDR:displaced_step_location:void:::NULL::(! gdbarch->displaced_step_location) != (! gdbarch->displaced_step_copy_insn)
+
# Refresh overlay mapped state for section OSECT.
F:void:overlay_update:struct obj_section *osect:osect
struct obstack;
struct bp_target_info;
struct target_desc;
+struct displaced_step_closure;
extern struct gdbarch *current_gdbarch;
EOF
#include "glibc-tdep.h"
#include "solib-svr4.h"
#include "symtab.h"
+#include "arch-utils.h"
/* Return the name of register REG. */
/* Enable TLS support. */
set_gdbarch_fetch_tls_load_module_address (gdbarch,
svr4_fetch_objfile_link_map);
+
+ /* Displaced stepping. */
+ set_gdbarch_displaced_step_copy_insn (gdbarch,
+ simple_displaced_step_copy_insn);
+ set_gdbarch_displaced_step_fixup (gdbarch, i386_displaced_step_fixup);
+ set_gdbarch_displaced_step_free_closure (gdbarch,
+ simple_displaced_step_free_closure);
+ set_gdbarch_displaced_step_location (gdbarch,
+ displaced_step_at_entry_point);
}
/* Provide a prototype to silence -Wmissing-prototypes. */
*len = sizeof (break_insn);
return break_insn;
}
+\f
+/* Displaced instruction handling. */
+
+
+static int
+i386_absolute_jmp_p (gdb_byte *insn)
+{
+ /* jmp far (absolute address in operand) */
+ if (insn[0] == 0xea)
+ return 1;
+
+ if (insn[0] == 0xff)
+ {
+ /* jump near, absolute indirect (/4) */
+ if ((insn[1] & 0x38) == 0x20)
+ return 1;
+
+ /* jump far, absolute indirect (/5) */
+ if ((insn[1] & 0x38) == 0x28)
+ return 1;
+ }
+
+ return 0;
+}
+
+static int
+i386_absolute_call_p (gdb_byte *insn)
+{
+ /* call far, absolute */
+ if (insn[0] == 0x9a)
+ return 1;
+
+ if (insn[0] == 0xff)
+ {
+ /* Call near, absolute indirect (/2) */
+ if ((insn[1] & 0x38) == 0x10)
+ return 1;
+
+ /* Call far, absolute indirect (/3) */
+ if ((insn[1] & 0x38) == 0x18)
+ return 1;
+ }
+
+ return 0;
+}
+
+static int
+i386_ret_p (gdb_byte *insn)
+{
+ switch (insn[0])
+ {
+ case 0xc2: /* ret near, pop N bytes */
+ case 0xc3: /* ret near */
+ case 0xca: /* ret far, pop N bytes */
+ case 0xcb: /* ret far */
+ case 0xcf: /* iret */
+ return 1;
+
+ default:
+ return 0;
+ }
+}
+
+static int
+i386_call_p (gdb_byte *insn)
+{
+ if (i386_absolute_call_p (insn))
+ return 1;
+
+ /* call near, relative */
+ if (insn[0] == 0xe8)
+ return 1;
+
+ return 0;
+}
+
+static int
+i386_breakpoint_p (gdb_byte *insn)
+{
+ return insn[0] == 0xcc; /* int 3 */
+}
+
+/* Return non-zero if INSN is a system call, and set *LENGTHP to its
+ length in bytes. Otherwise, return zero. */
+static int
+i386_syscall_p (gdb_byte *insn, ULONGEST *lengthp)
+{
+ if (insn[0] == 0xcd)
+ {
+ *lengthp = 2;
+ return 1;
+ }
+
+ return 0;
+}
+
+/* Fix up the state of registers and memory after having single-stepped
+ a displaced instruction. */
+void
+i386_displaced_step_fixup (struct gdbarch *gdbarch,
+ struct displaced_step_closure *closure,
+ CORE_ADDR from, CORE_ADDR to,
+ struct regcache *regs)
+{
+ /* The offset we applied to the instruction's address.
+ This could well be negative (when viewed as a signed 32-bit
+ value), but ULONGEST won't reflect that, so take care when
+ applying it. */
+ ULONGEST insn_offset = to - from;
+
+ /* Since we use simple_displaced_step_copy_insn, our closure is a
+ copy of the instruction. */
+ gdb_byte *insn = (gdb_byte *) closure;
+
+ if (debug_displaced)
+ fprintf_unfiltered (gdb_stdlog,
+ "displaced: fixup (0x%s, 0x%s), "
+ "insn = 0x%02x 0x%02x ...\n",
+ paddr_nz (from), paddr_nz (to), insn[0], insn[1]);
+
+ /* The list of issues to contend with here is taken from
+ resume_execution in arch/i386/kernel/kprobes.c, Linux 2.6.20.
+ Yay for Free Software! */
+
+ /* Relocate the %eip, if necessary. */
+
+ /* Except in the case of absolute or indirect jump or call
+ instructions, or a return instruction, the new eip is relative to
+ the displaced instruction; make it relative. Well, signal
+ handler returns don't need relocation either, but we use the
+ value of %eip to recognize those; see below. */
+ if (! i386_absolute_jmp_p (insn)
+ && ! i386_absolute_call_p (insn)
+ && ! i386_ret_p (insn))
+ {
+ ULONGEST orig_eip;
+ ULONGEST insn_len;
+
+ regcache_cooked_read_unsigned (regs, I386_EIP_REGNUM, &orig_eip);
+
+ /* A signal trampoline system call changes the %eip, resuming
+ execution of the main program after the signal handler has
+ returned. That makes them like 'return' instructions; we
+ shouldn't relocate %eip.
+
+ But most system calls don't, and we do need to relocate %eip.
+
+ Our heuristic for distinguishing these cases: if stepping
+ over the system call instruction left control directly after
+ the instruction, the we relocate --- control almost certainly
+ doesn't belong in the displaced copy. Otherwise, we assume
+ the instruction has put control where it belongs, and leave
+ it unrelocated. Goodness help us if there are PC-relative
+ system calls. */
+ if (i386_syscall_p (insn, &insn_len)
+ && orig_eip != to + insn_len)
+ {
+ if (debug_displaced)
+ fprintf_unfiltered (gdb_stdlog,
+ "displaced: syscall changed %%eip; "
+ "not relocating\n");
+ }
+ else
+ {
+ ULONGEST eip = (orig_eip - insn_offset) & 0xffffffffUL;
+
+ /* If we have stepped over a breakpoint, set the %eip to
+ point at the breakpoint instruction itself.
+
+ (gdbarch_decr_pc_after_break was never something the core
+ of GDB should have been concerned with; arch-specific
+ code should be making PC values consistent before
+ presenting them to GDB.) */
+ if (i386_breakpoint_p (insn))
+ {
+ fprintf_unfiltered (gdb_stdlog,
+ "displaced: stepped breakpoint\n");
+ eip--;
+ }
+
+ regcache_cooked_write_unsigned (regs, I386_EIP_REGNUM, eip);
+
+ if (debug_displaced)
+ fprintf_unfiltered (gdb_stdlog,
+ "displaced: "
+ "relocated %%eip from 0x%s to 0x%s\n",
+ paddr_nz (orig_eip), paddr_nz (eip));
+ }
+ }
+
+ /* If the instruction was PUSHFL, then the TF bit will be set in the
+ pushed value, and should be cleared. We'll leave this for later,
+ since GDB already messes up the TF flag when stepping over a
+ pushfl. */
+
+ /* If the instruction was a call, the return address now atop the
+ stack is the address following the copied instruction. We need
+ to make it the address following the original instruction. */
+ if (i386_call_p (insn))
+ {
+ ULONGEST esp;
+ ULONGEST retaddr;
+ const ULONGEST retaddr_len = 4;
+
+ regcache_cooked_read_unsigned (regs, I386_ESP_REGNUM, &esp);
+ retaddr = read_memory_unsigned_integer (esp, retaddr_len);
+ retaddr = (retaddr - insn_offset) & 0xffffffffUL;
+ write_memory_unsigned_integer (esp, retaddr_len, retaddr);
+
+ if (debug_displaced)
+ fprintf_unfiltered (gdb_stdlog,
+ "displaced: relocated return addr at 0x%s "
+ "to 0x%s\n",
+ paddr_nz (esp),
+ paddr_nz (retaddr));
+ }
+}
+
+
\f
#ifdef I386_REGNO_TO_SYMMETRY
#error "The Sequent Symmetry is no longer supported."
}
/* Maximum instruction length we need to handle. */
-#define I386_MAX_INSN_LEN 6
+#define I386_MAX_MATCHED_INSN_LEN 6
/* Instruction description. */
struct i386_insn
{
size_t len;
- gdb_byte insn[I386_MAX_INSN_LEN];
- gdb_byte mask[I386_MAX_INSN_LEN];
+ gdb_byte insn[I386_MAX_MATCHED_INSN_LEN];
+ gdb_byte mask[I386_MAX_MATCHED_INSN_LEN];
};
/* Search for the instruction at PC in the list SKIP_INSNS. Return
{
if ((op & insn->mask[0]) == insn->insn[0])
{
- gdb_byte buf[I386_MAX_INSN_LEN - 1];
+ gdb_byte buf[I386_MAX_MATCHED_INSN_LEN - 1];
int insn_matched = 1;
size_t i;
gdb_assert (insn->len > 1);
- gdb_assert (insn->len <= I386_MAX_INSN_LEN);
+ gdb_assert (insn->len <= I386_MAX_MATCHED_INSN_LEN);
target_read_memory (pc + 1, buf, insn->len - 1);
for (i = 1; i < insn->len; i++)
set_gdbarch_breakpoint_from_pc (gdbarch, i386_breakpoint_from_pc);
set_gdbarch_decr_pc_after_break (gdbarch, 1);
+ set_gdbarch_max_insn_length (gdbarch, I386_MAX_INSN_LEN);
set_gdbarch_frame_args_skip (gdbarch, 8);
#define I386_SEL_UPL 0x0003 /* User Privilige Level. */
#define I386_SEL_KPL 0x0000 /* Kernel Privilige Level. */
+/* The length of the longest i386 instruction (according to
+ include/asm-i386/kprobes.h in Linux 2.6. */
+#define I386_MAX_INSN_LEN (16)
+
/* Functions exported from i386-tdep.c. */
extern CORE_ADDR i386_pe_skip_trampoline_code (CORE_ADDR pc, char *name);
i386_regset_from_core_section (struct gdbarch *gdbarch,
const char *sect_name, size_t sect_size);
+
+extern void i386_displaced_step_fixup (struct gdbarch *gdbarch,
+ struct displaced_step_closure *closure,
+ CORE_ADDR from, CORE_ADDR to,
+ struct regcache *regs);
+
/* Initialize a basic ELF architecture variant. */
extern void i386_elf_init_abi (struct gdbarch_info, struct gdbarch *);
than forked. */
extern int attach_flag;
+
+/* True if we are debugging displaced stepping. */
+extern int debug_displaced;
+
+/* Dump LEN bytes at BUF in hex to FILE, followed by a newline. */
+void displaced_step_dump_bytes (struct ui_file *file,
+ const gdb_byte *buf, size_t len);
+
\f
/* Possible values for gdbarch_call_dummy_location. */
#define ON_STACK 1
static ptid_t previous_inferior_ptid;
+int debug_displaced = 0;
+static void
+show_debug_displaced (struct ui_file *file, int from_tty,
+ struct cmd_list_element *c, const char *value)
+{
+ fprintf_filtered (file, _("Displace stepping debugging is %s.\n"), value);
+}
+
static int debug_infrun = 0;
static void
show_debug_infrun (struct ui_file *file, int from_tty,
stepping the thread user has selected. */
static ptid_t deferred_step_ptid;
\f
+/* Displaced stepping. */
+
+/* In non-stop debugging mode, we must take special care to manage
+ breakpoints properly; in particular, the traditional strategy for
+ stepping a thread past a breakpoint it has hit is unsuitable.
+ 'Displaced stepping' is a tactic for stepping one thread past a
+ breakpoint it has hit while ensuring that other threads running
+ concurrently will hit the breakpoint as they should.
+
+ The traditional way to step a thread T off a breakpoint in a
+ multi-threaded program in all-stop mode is as follows:
+
+ a0) Initially, all threads are stopped, and breakpoints are not
+ inserted.
+ a1) We single-step T, leaving breakpoints uninserted.
+ a2) We insert breakpoints, and resume all threads.
+
+ In non-stop debugging, however, this strategy is unsuitable: we
+ don't want to have to stop all threads in the system in order to
+ continue or step T past a breakpoint. Instead, we use displaced
+ stepping:
+
+ n0) Initially, T is stopped, other threads are running, and
+ breakpoints are inserted.
+ n1) We copy the instruction "under" the breakpoint to a separate
+ location, outside the main code stream, making any adjustments
+ to the instruction, register, and memory state as directed by
+ T's architecture.
+ n2) We single-step T over the instruction at its new location.
+ n3) We adjust the resulting register and memory state as directed
+ by T's architecture. This includes resetting T's PC to point
+ back into the main instruction stream.
+ n4) We resume T.
+
+ This approach depends on the following gdbarch methods:
+
+ - gdbarch_max_insn_length and gdbarch_displaced_step_location
+ indicate where to copy the instruction, and how much space must
+ be reserved there. We use these in step n1.
+
+ - gdbarch_displaced_step_copy_insn copies a instruction to a new
+ address, and makes any necessary adjustments to the instruction,
+ register contents, and memory. We use this in step n1.
+
+ - gdbarch_displaced_step_fixup adjusts registers and memory after
+ we have successfuly single-stepped the instruction, to yield the
+ same effect the instruction would have had if we had executed it
+ at its original address. We use this in step n3.
+
+ - gdbarch_displaced_step_free_closure provides cleanup.
+
+ The gdbarch_displaced_step_copy_insn and
+ gdbarch_displaced_step_fixup functions must be written so that
+ copying an instruction with gdbarch_displaced_step_copy_insn,
+ single-stepping across the copied instruction, and then applying
+ gdbarch_displaced_insn_fixup should have the same effects on the
+ thread's memory and registers as stepping the instruction in place
+ would have. Exactly which responsibilities fall to the copy and
+ which fall to the fixup is up to the author of those functions.
+
+ See the comments in gdbarch.sh for details.
+
+ Note that displaced stepping and software single-step cannot
+ currently be used in combination, although with some care I think
+ they could be made to. Software single-step works by placing
+ breakpoints on all possible subsequent instructions; if the
+ displaced instruction is a PC-relative jump, those breakpoints
+ could fall in very strange places --- on pages that aren't
+ executable, or at addresses that are not proper instruction
+ boundaries. (We do generally let other threads run while we wait
+ to hit the software single-step breakpoint, and they might
+ encounter such a corrupted instruction.) One way to work around
+ this would be to have gdbarch_displaced_step_copy_insn fully
+ simulate the effect of PC-relative instructions (and return NULL)
+ on architectures that use software single-stepping.
+
+ In non-stop mode, we can have independent and simultaneous step
+ requests, so more than one thread may need to simultaneously step
+ over a breakpoint. The current implementation assumes there is
+ only one scratch space per process. In this case, we have to
+ serialize access to the scratch space. If thread A wants to step
+ over a breakpoint, but we are currently waiting for some other
+ thread to complete a displaced step, we leave thread A stopped and
+ place it in the displaced_step_request_queue. Whenever a displaced
+ step finishes, we pick the next thread in the queue and start a new
+ displaced step operation on it. See displaced_step_prepare and
+ displaced_step_fixup for details. */
+
+/* If this is not null_ptid, this is the thread carrying out a
+ displaced single-step. This thread's state will require fixing up
+ once it has completed its step. */
+static ptid_t displaced_step_ptid;
+
+struct displaced_step_request
+{
+ ptid_t ptid;
+ struct displaced_step_request *next;
+};
+
+/* A queue of pending displaced stepping requests. */
+struct displaced_step_request *displaced_step_request_queue;
+
+/* The architecture the thread had when we stepped it. */
+static struct gdbarch *displaced_step_gdbarch;
+
+/* The closure provided gdbarch_displaced_step_copy_insn, to be used
+ for post-step cleanup. */
+static struct displaced_step_closure *displaced_step_closure;
+
+/* The address of the original instruction, and the copy we made. */
+static CORE_ADDR displaced_step_original, displaced_step_copy;
+
+/* Saved contents of copy area. */
+static gdb_byte *displaced_step_saved_copy;
+
+/* When this is non-zero, we are allowed to use displaced stepping, if
+ the architecture supports it. When this is zero, we use
+ traditional the hold-and-step approach. */
+int can_use_displaced_stepping = 1;
+static void
+show_can_use_displaced_stepping (struct ui_file *file, int from_tty,
+ struct cmd_list_element *c,
+ const char *value)
+{
+ fprintf_filtered (file, _("\
+Debugger's willingness to use displaced stepping to step over "
+"breakpoints is %s.\n"), value);
+}
+
+/* Return non-zero if displaced stepping is enabled, and can be used
+ with GDBARCH. */
+static int
+use_displaced_stepping (struct gdbarch *gdbarch)
+{
+ return (can_use_displaced_stepping
+ && gdbarch_displaced_step_copy_insn_p (gdbarch));
+}
+
+/* Clean out any stray displaced stepping state. */
+static void
+displaced_step_clear (void)
+{
+ /* Indicate that there is no cleanup pending. */
+ displaced_step_ptid = null_ptid;
+
+ if (displaced_step_closure)
+ {
+ gdbarch_displaced_step_free_closure (displaced_step_gdbarch,
+ displaced_step_closure);
+ displaced_step_closure = NULL;
+ }
+}
+
+static void
+cleanup_displaced_step_closure (void *ptr)
+{
+ struct displaced_step_closure *closure = ptr;
+
+ gdbarch_displaced_step_free_closure (current_gdbarch, closure);
+}
+
+/* Dump LEN bytes at BUF in hex to FILE, followed by a newline. */
+void
+displaced_step_dump_bytes (struct ui_file *file,
+ const gdb_byte *buf,
+ size_t len)
+{
+ int i;
+
+ for (i = 0; i < len; i++)
+ fprintf_unfiltered (file, "%02x ", buf[i]);
+ fputs_unfiltered ("\n", file);
+}
+
+/* Prepare to single-step, using displaced stepping.
+
+ Note that we cannot use displaced stepping when we have a signal to
+ deliver. If we have a signal to deliver and an instruction to step
+ over, then after the step, there will be no indication from the
+ target whether the thread entered a signal handler or ignored the
+ signal and stepped over the instruction successfully --- both cases
+ result in a simple SIGTRAP. In the first case we mustn't do a
+ fixup, and in the second case we must --- but we can't tell which.
+ Comments in the code for 'random signals' in handle_inferior_event
+ explain how we handle this case instead.
+
+ Returns 1 if preparing was successful -- this thread is going to be
+ stepped now; or 0 if displaced stepping this thread got queued. */
+static int
+displaced_step_prepare (ptid_t ptid)
+{
+ struct cleanup *old_cleanups;
+ struct regcache *regcache = get_thread_regcache (ptid);
+ struct gdbarch *gdbarch = get_regcache_arch (regcache);
+ CORE_ADDR original, copy;
+ ULONGEST len;
+ struct displaced_step_closure *closure;
+
+ /* We should never reach this function if the architecture does not
+ support displaced stepping. */
+ gdb_assert (gdbarch_displaced_step_copy_insn_p (gdbarch));
+
+ /* For the first cut, we're displaced stepping one thread at a
+ time. */
+
+ if (!ptid_equal (displaced_step_ptid, null_ptid))
+ {
+ /* Already waiting for a displaced step to finish. Defer this
+ request and place in queue. */
+ struct displaced_step_request *req, *new_req;
+
+ if (debug_displaced)
+ fprintf_unfiltered (gdb_stdlog,
+ "displaced: defering step of %s\n",
+ target_pid_to_str (ptid));
+
+ new_req = xmalloc (sizeof (*new_req));
+ new_req->ptid = ptid;
+ new_req->next = NULL;
+
+ if (displaced_step_request_queue)
+ {
+ for (req = displaced_step_request_queue;
+ req && req->next;
+ req = req->next)
+ ;
+ req->next = new_req;
+ }
+ else
+ displaced_step_request_queue = new_req;
+
+ return 0;
+ }
+ else
+ {
+ if (debug_displaced)
+ fprintf_unfiltered (gdb_stdlog,
+ "displaced: stepping %s now\n",
+ target_pid_to_str (ptid));
+ }
+
+ displaced_step_clear ();
+
+ original = read_pc_pid (ptid);
+
+ copy = gdbarch_displaced_step_location (gdbarch);
+ len = gdbarch_max_insn_length (gdbarch);
+
+ /* Save the original contents of the copy area. */
+ displaced_step_saved_copy = xmalloc (len);
+ old_cleanups = make_cleanup (free_current_contents,
+ &displaced_step_saved_copy);
+ read_memory (copy, displaced_step_saved_copy, len);
+ if (debug_displaced)
+ {
+ fprintf_unfiltered (gdb_stdlog, "displaced: saved 0x%s: ",
+ paddr_nz (copy));
+ displaced_step_dump_bytes (gdb_stdlog, displaced_step_saved_copy, len);
+ };
+
+ closure = gdbarch_displaced_step_copy_insn (gdbarch,
+ original, copy, regcache);
+
+ /* We don't support the fully-simulated case at present. */
+ gdb_assert (closure);
+
+ make_cleanup (cleanup_displaced_step_closure, closure);
+
+ /* Resume execution at the copy. */
+ write_pc_pid (copy, ptid);
+
+ discard_cleanups (old_cleanups);
+
+ if (debug_displaced)
+ fprintf_unfiltered (gdb_stdlog, "displaced: displaced pc to 0x%s\n",
+ paddr_nz (copy));
+
+ /* Save the information we need to fix things up if the step
+ succeeds. */
+ displaced_step_ptid = ptid;
+ displaced_step_gdbarch = gdbarch;
+ displaced_step_closure = closure;
+ displaced_step_original = original;
+ displaced_step_copy = copy;
+ return 1;
+}
+
+static void
+displaced_step_clear_cleanup (void *ignore)
+{
+ displaced_step_clear ();
+}
+
+static void
+write_memory_ptid (ptid_t ptid, CORE_ADDR memaddr, const gdb_byte *myaddr, int len)
+{
+ struct cleanup *ptid_cleanup = save_inferior_ptid ();
+ inferior_ptid = ptid;
+ write_memory (memaddr, myaddr, len);
+ do_cleanups (ptid_cleanup);
+}
+
+static void
+displaced_step_fixup (ptid_t event_ptid, enum target_signal signal)
+{
+ struct cleanup *old_cleanups;
+
+ /* Was this event for the pid we displaced? */
+ if (ptid_equal (displaced_step_ptid, null_ptid)
+ || ! ptid_equal (displaced_step_ptid, event_ptid))
+ return;
+
+ old_cleanups = make_cleanup (displaced_step_clear_cleanup, 0);
+
+ /* Restore the contents of the copy area. */
+ {
+ ULONGEST len = gdbarch_max_insn_length (displaced_step_gdbarch);
+ write_memory_ptid (displaced_step_ptid, displaced_step_copy,
+ displaced_step_saved_copy, len);
+ if (debug_displaced)
+ fprintf_unfiltered (gdb_stdlog, "displaced: restored 0x%s\n",
+ paddr_nz (displaced_step_copy));
+ }
+
+ /* Did the instruction complete successfully? */
+ if (signal == TARGET_SIGNAL_TRAP)
+ {
+ /* Fix up the resulting state. */
+ gdbarch_displaced_step_fixup (displaced_step_gdbarch,
+ displaced_step_closure,
+ displaced_step_original,
+ displaced_step_copy,
+ get_thread_regcache (displaced_step_ptid));
+ }
+ else
+ {
+ /* Since the instruction didn't complete, all we can do is
+ relocate the PC. */
+ CORE_ADDR pc = read_pc_pid (event_ptid);
+ pc = displaced_step_original + (pc - displaced_step_copy);
+ write_pc_pid (pc, event_ptid);
+ }
+
+ do_cleanups (old_cleanups);
+
+ /* Are there any pending displaced stepping requests? If so, run
+ one now. */
+ if (displaced_step_request_queue)
+ {
+ struct displaced_step_request *head;
+ ptid_t ptid;
+
+ head = displaced_step_request_queue;
+ ptid = head->ptid;
+ displaced_step_request_queue = head->next;
+ xfree (head);
+
+ if (debug_displaced)
+ fprintf_unfiltered (gdb_stdlog,
+ "displaced: stepping queued %s now\n",
+ target_pid_to_str (ptid));
+
+
+ displaced_step_ptid = null_ptid;
+ displaced_step_prepare (ptid);
+ target_resume (ptid, 1, TARGET_SIGNAL_0);
+ }
+}
+
+\f
+/* Resuming. */
/* Things to clean up if we QUIT out of resume (). */
static void
{
int should_resume = 1;
struct cleanup *old_cleanups = make_cleanup (resume_cleanups, 0);
+ CORE_ADDR pc = read_pc ();
QUIT;
if (debug_infrun)
- fprintf_unfiltered (gdb_stdlog, "infrun: resume (step=%d, signal=%d)\n",
- step, sig);
-
- /* FIXME: calling breakpoint_here_p (read_pc ()) three times! */
-
+ fprintf_unfiltered (gdb_stdlog,
+ "infrun: resume (step=%d, signal=%d), "
+ "stepping_over_breakpoint=%d\n",
+ step, sig, stepping_over_breakpoint);
/* Some targets (e.g. Solaris x86) have a kernel bug when stepping
over an instruction that causes a page fault without triggering
removed or inserted, as appropriate. The exception is if we're sitting
at a permanent breakpoint; we need to step over it, but permanent
breakpoints can't be removed. So we have to test for it here. */
- if (breakpoint_here_p (read_pc ()) == permanent_breakpoint_here)
+ if (breakpoint_here_p (pc) == permanent_breakpoint_here)
{
if (gdbarch_skip_permanent_breakpoint_p (current_gdbarch))
gdbarch_skip_permanent_breakpoint (current_gdbarch,
a command like `return' or `jump' to continue execution."));
}
+ /* If enabled, step over breakpoints by executing a copy of the
+ instruction at a different address.
+
+ We can't use displaced stepping when we have a signal to deliver;
+ the comments for displaced_step_prepare explain why. The
+ comments in the handle_inferior event for dealing with 'random
+ signals' explain what we do instead. */
+ if (use_displaced_stepping (current_gdbarch)
+ && stepping_over_breakpoint
+ && sig == TARGET_SIGNAL_0)
+ {
+ if (!displaced_step_prepare (inferior_ptid))
+ /* Got placed in displaced stepping queue. Will be resumed
+ later when all the currently queued displaced stepping
+ requests finish. */
+ return;
+ }
+
if (step && gdbarch_software_single_step_p (current_gdbarch))
{
/* Do it the hard way, w/temp breakpoints */
`wait_for_inferior' */
singlestep_breakpoints_inserted_p = 1;
singlestep_ptid = inferior_ptid;
- singlestep_pc = read_pc ();
+ singlestep_pc = pc;
}
}
/* Most targets can step a breakpoint instruction, thus
executing it normally. But if this one cannot, just
continue and we will hit it anyway. */
- if (step && breakpoint_inserted_here_p (read_pc ()))
+ if (step && breakpoint_inserted_here_p (pc))
step = 0;
}
+
+ if (debug_displaced
+ && use_displaced_stepping (current_gdbarch)
+ && stepping_over_breakpoint)
+ {
+ CORE_ADDR actual_pc = read_pc_pid (resume_ptid);
+ gdb_byte buf[4];
+
+ fprintf_unfiltered (gdb_stdlog, "displaced: run 0x%s: ",
+ paddr_nz (actual_pc));
+ read_memory (actual_pc, buf, sizeof (buf));
+ displaced_step_dump_bytes (gdb_stdlog, buf, sizeof (buf));
+ }
+
target_resume (resume_ptid, step, sig);
}
discard_cleanups (old_cleanups);
}
\f
+/* Proceeding. */
/* Clear out all variables saying what to do when inferior is continued.
First do this, then set the ones you want, then call `proceed'. */
if (oneproc)
{
- /* We will get a trace trap after one instruction.
- Continue it automatically and insert breakpoints then. */
stepping_over_breakpoint = 1;
- /* FIXME: if breakpoints are always inserted, we'll trap
- if trying to single-step over breakpoint. Disable
- all breakpoints. In future, we'd need to invent some
- smart way of stepping over breakpoint instruction without
- hitting breakpoint. */
- remove_breakpoints ();
+ /* If displaced stepping is enabled, we can step over the
+ breakpoint without hitting it, so leave all breakpoints
+ inserted. Otherwise we need to disable all breakpoints, step
+ one instruction, and then re-add them when that step is
+ finished. */
+ if (!use_displaced_stepping (current_gdbarch))
+ remove_breakpoints ();
}
- else
+
+ /* We can insert breakpoints if we're not trying to step over one,
+ or if we are stepping over one but we're using displaced stepping
+ to do so. */
+ if (! stepping_over_breakpoint || use_displaced_stepping (current_gdbarch))
insert_breakpoints ();
if (siggnal != TARGET_SIGNAL_DEFAULT)
deferred_step_ptid = null_ptid;
target_last_wait_ptid = minus_one_ptid;
+
+ displaced_step_clear ();
}
+
\f
/* This enum encodes possible reasons for doing a target_wait, so that
wfi can call target_wait in one place. (Ultimately the call will be
return;
}
+ /* Do we need to clean up the state of a thread that has completed a
+ displaced single-step? (Doing so usually affects the PC, so do
+ it here, before we set stop_pc.) */
+ displaced_step_fixup (ecs->ptid, stop_signal);
+
stop_pc = read_pc_pid (ecs->ptid);
if (debug_infrun)
- fprintf_unfiltered (gdb_stdlog, "infrun: stop_pc = 0x%s\n", paddr_nz (stop_pc));
+ {
+ fprintf_unfiltered (gdb_stdlog, "infrun: stop_pc = 0x%s\n",
+ paddr_nz (stop_pc));
+ if (STOPPED_BY_WATCHPOINT (&ecs->ws))
+ {
+ CORE_ADDR addr;
+ fprintf_unfiltered (gdb_stdlog, "infrun: stopped by watchpoint\n");
+
+ if (target_stopped_data_address (¤t_target, &addr))
+ fprintf_unfiltered (gdb_stdlog,
+ "infrun: stopped data address = 0x%s\n",
+ paddr_nz (addr));
+ else
+ fprintf_unfiltered (gdb_stdlog,
+ "infrun: (no data address available)\n");
+ }
+ }
if (stepping_past_singlestep_breakpoint)
{
if (thread_hop_needed)
{
- int remove_status;
+ int remove_status = 0;
if (debug_infrun)
fprintf_unfiltered (gdb_stdlog, "infrun: thread_hop_needed\n");
singlestep_breakpoints_inserted_p = 0;
}
- remove_status = remove_breakpoints ();
+ /* If the arch can displace step, don't remove the
+ breakpoints. */
+ if (!use_displaced_stepping (current_gdbarch))
+ remove_status = remove_breakpoints ();
+
/* Did we fail to remove breakpoints? If so, try
to set the PC past the bp. (There's at least
one situation in which we can fail to remove
&& (HAVE_STEPPABLE_WATCHPOINT
|| gdbarch_have_nonsteppable_watchpoint (current_gdbarch)))
{
- if (debug_infrun)
- fprintf_unfiltered (gdb_stdlog, "infrun: STOPPED_BY_WATCHPOINT\n");
-
/* At this point, we are stopped at an instruction which has
attempted to write to a piece of memory under control of
a watchpoint. The instruction hasn't actually executed
when we're trying to execute a breakpoint instruction on a
non-executable stack. This happens for call dummy breakpoints
for architectures like SPARC that place call dummies on the
- stack. */
+ stack.
+ If we're doing a displaced step past a breakpoint, then the
+ breakpoint is always inserted at the original instruction;
+ non-standard signals can't be explained by the breakpoint. */
if (stop_signal == TARGET_SIGNAL_TRAP
- || (breakpoint_inserted_here_p (stop_pc)
+ || (! stepping_over_breakpoint
+ && breakpoint_inserted_here_p (stop_pc)
&& (stop_signal == TARGET_SIGNAL_ILL
|| stop_signal == TARGET_SIGNAL_SEGV
|| stop_signal == TARGET_SIGNAL_EMT))
{
/* We were just starting a new sequence, attempting to
single-step off of a breakpoint and expecting a SIGTRAP.
- Intead this signal arrives. This signal will take us out
+ Instead this signal arrives. This signal will take us out
of the stepping range so GDB needs to remember to, when
the signal handler returns, resume stepping off that
breakpoint. */
code paths as single-step - set a breakpoint at the
signal return address and then, once hit, step off that
breakpoint. */
+ if (debug_infrun)
+ fprintf_unfiltered (gdb_stdlog,
+ "infrun: signal arrived while stepping over "
+ "breakpoint\n");
insert_step_resume_breakpoint_at_frame (get_current_frame ());
ecs->step_after_step_resume_breakpoint = 1;
Note that this is only needed for a signal delivered
while in the single-step range. Nested signals aren't a
problem as they eventually all return. */
+ if (debug_infrun)
+ fprintf_unfiltered (gdb_stdlog,
+ "infrun: signal may take us out of "
+ "single-step range\n");
+
insert_step_resume_breakpoint_at_frame (get_current_frame ());
keep_going (ecs);
return;
if (ecs->stepping_over_breakpoint)
{
- remove_breakpoints ();
+ if (! use_displaced_stepping (current_gdbarch))
+ /* Since we can't do a displaced step, we have to remove
+ the breakpoint while we step it. To keep things
+ simple, we remove them all. */
+ remove_breakpoints ();
}
else
{
show_debug_infrun,
&setdebuglist, &showdebuglist);
+ add_setshow_boolean_cmd ("displaced", class_maintenance, &debug_displaced, _("\
+Set displaced stepping debugging."), _("\
+Show displaced stepping debugging."), _("\
+When non-zero, displaced stepping specific debugging is enabled."),
+ NULL,
+ show_debug_displaced,
+ &setdebuglist, &showdebuglist);
+
numsigs = (int) TARGET_SIGNAL_LAST;
signal_stop = (unsigned char *) xmalloc (sizeof (signal_stop[0]) * numsigs);
signal_print = (unsigned char *)
show_step_stop_if_no_debug,
&setlist, &showlist);
+ add_setshow_boolean_cmd ("can-use-displaced-stepping", class_maintenance,
+ &can_use_displaced_stepping, _("\
+Set debugger's willingness to use displaced stepping."), _("\
+Show debugger's willingness to use displaced stepping."), _("\
+If zero, gdb will not use to use displaced stepping to step over\n\
+breakpoints, even if such is supported by the target."),
+ NULL,
+ show_can_use_displaced_stepping,
+ &maintenance_set_cmdlist,
+ &maintenance_show_cmdlist);
+
+
/* ptid initializations */
null_ptid = ptid_build (0, 0, 0);
minus_one_ptid = ptid_build (-1, 0, 0);
inferior_ptid = null_ptid;
target_last_wait_ptid = minus_one_ptid;
+ displaced_step_ptid = null_ptid;
}
+2008-05-02 Jim Blandy <jimb@codesourcery.com>
+
+ * gdb.asm/asmsrc1.s: Add scratch space.
+
2007-05-01 Daniel Jacobowitz <dan@codesourcery.com>
* gdb.arch/thumb-prologue.exp: Do not expect a saved PC.
gdbasm_exit0
gdbasm_end _start
+ comment "Displaced stepping requires scratch space at _start"
+ comment "at least as large as the largest instruction. No"
+ comment "breakpoints should be set within the scratch space."
+ gdbasm_several_nops
+ gdbasm_several_nops
+ gdbasm_several_nops
+ gdbasm_several_nops
+ gdbasm_several_nops
+ gdbasm_several_nops
+ gdbasm_several_nops
+ gdbasm_several_nops
+
comment "main routine for assembly source debugging test"
comment "This particular testcase uses macros in <arch>.inc to achieve"
comment "machine independence."
projects / binutils-gdb.git / commitdiff