nitrogen7_defconfig: *defconfig
nitrogen8m_defconfig: *defconfig
odroidc2_defconfig: *defconfig
+odroidxu4_defconfig: *defconfig
olimex_a10_olinuxino_lime_defconfig: *defconfig
olimex_a13_olinuxino_defconfig: *defconfig
olimex_a20_olinuxino_lime2_defconfig: *defconfig
F: package/python-ipython/
F: package/liburcu/
+N: Pierre Crokaert <pct@crookies.net>
+F: board/hardkernel/odroidxu4/
+F: configs/odroidxu4_defconfig
+
N: Pierre Ducroquet <pinaraf@pinaraf.info>
F: package/kf5/
--- /dev/null
+ODROIDXU-UBOOT-CONFIG
+
+# U-Boot Parameters
+setenv initrd_high "0xffffffff"
+setenv fdt_high "0xffffffff"
+
+setenv macaddr "00:1e:06:61:7a:39"
+setenv bootrootfs "console=tty1 root=/dev/mmcblk1p2 rootwait rw fsck.repair=yes net.ifnames=0"
+setenv bootcmd "load mmc 0:1 0x40008000 zImage; load mmc 0:1 0x44000000 exynos5422-odroidxu4.dtb; bootz 0x40008000 - 0x44000000"
+setenv vout "hdmi"
+setenv governor "performance"
+setenv HPD "true"
+
+# TMDS data amplitude control.
+setenv hdmi_tx_amp_lvl "31"
+
+# TMDS data amplitude fine control for each channel.
+setenv hdmi_tx_lvl_ch0 "3"
+setenv hdmi_tx_lvl_ch1 "3"
+setenv hdmi_tx_lvl_ch2 "3"
+
+# TMDS data pre-emphasis level control.
+setenv hdmi_tx_emp_lvl "6"
+
+# TMDS clock amplitude control.
+setenv hdmi_clk_amp_lvl "31"
+
+# TMDS data source termination resistor control.
+setenv hdmi_tx_res "0"
+
+setenv hdmi_phy_control "hdmi_tx_amp_lvl=${hdmi_tx_amp_lvl} hdmi_tx_lvl_ch0=${hdmi_tx_lvl_ch0} hdmi_tx_lvl_ch1=${hdmi_tx_lvl_ch1} hdmi_tx_lvl_ch2=${hdmi_tx_lvl_ch2} hdmi_tx_emp_lvl=${hdmi_tx_emp_lvl} hdmi_clk_amp_lvl=${hdmi_clk_amp_lvl} hdmi_tx_res=${hdmi_tx_res} HPD=${HPD} vout=${vout}"
+
+# final boot args
+setenv bootargs "${bootrootfs} ${videoconfig} smsc95xx.macaddr=${macaddr} governor=${governor} ${hdmi_phy_control}"
+
+# Boot the board
+boot
+
--- /dev/null
+image boot.vfat {
+ vfat {
+ files = {
+ "boot.ini",
+ "zImage",
+ "exynos5422-odroidxu4.dtb"
+ }
+ }
+ size = 32M
+}
+
+image sdcard.img {
+ hdimage {
+ }
+
+ partition bl1 {
+ in-partition-table = "no"
+ image = "bl1.bin.hardkernel"
+ offset = 512
+ size = 15360
+ }
+
+ partition bl2 {
+ in-partition-table = "no"
+ image = "bl2.bin.hardkernel.720k_uboot"
+ offset = 15872
+ size = 16384
+ }
+
+ partition u-boot {
+ in-partition-table = "no"
+ image = "u-boot-dtb.bin"
+ offset = 32256
+ size = 720k
+ }
+
+ partition tzsw {
+ in-partition-table = "no"
+ image = "tzsw.bin.hardkernel"
+ offset = 769536
+ size = 256k
+ }
+
+ partition vfat {
+ partition-type = 0xC
+ image = "boot.vfat"
+ offset = 2097152
+ }
+
+ partition rootfs {
+ partition-type = 0x83
+ image = "rootfs.ext4"
+ }
+}
--- /dev/null
+#!/bin/sh
+
+BOARD_DIR="$(dirname $0)"
+GENIMAGE_CFG="${BOARD_DIR}/genimage.cfg"
+GENIMAGE_TMP="${BUILD_DIR}/genimage.tmp"
+
+cp ${BOARD_DIR}/boot.ini ${BINARIES_DIR}/
+
+# The bl1.bin.hardkernel file provided by the uboot hardkernel repository is overwritten
+# by the bl2.bin.hardkernel in the sd_fusing.sh script because it is too big.
+# In order to implement this in genimage, we need to truncate the bl1.bin file
+# so that it does not exceed the available place.
+# An issue has been filled about this: https://github.com/hardkernel/u-boot/issues/45
+truncate -s 15360 ${BINARIES_DIR}/bl1.bin.hardkernel
+
+rm -rf "${GENIMAGE_TMP}"
+
+genimage \
+ --rootpath "${TARGET_DIR}" \
+ --tmppath "${GENIMAGE_TMP}" \
+ --inputpath "${BINARIES_DIR}" \
+ --outputpath "${BINARIES_DIR}" \
+ --config "${GENIMAGE_CFG}"
+
--- /dev/null
+Odroid XU-4 board with Samsung Exynos 5422 SoC
+
+How to build it
+===============
+
+ $ make odroidxu4_defconfig
+
+Then you can edit the build options using
+
+ $ make menuconfig
+
+Compile all and build rootfs image:
+
+ $ make
+
+Note: you will need to have access to the network, since Buildroot will
+download the packages' sources.
+
+Result of the build
+-------------------
+
+After building, you should obtain all output files in output/images/
+
+
+How to write the SD card or eMMC
+================================
+
+Once the build process is finished you will have an image called "sdcard.img"
+in the output/images/ directory.
+
+Copy the bootable "sdcard.img" onto an SD card or eMMC with "dd":
+
+ $ sudo dd if=output/images/sdcard.img of=/dev/sdX
+
+Insert the SDcard into your ODROID-XU4, and power it up. Your new system
+should come up now.
+
--- /dev/null
+BR2_arm=y
+BR2_cortex_a7=y
+BR2_ROOTFS_POST_IMAGE_SCRIPT="board/hardkernel/odroidxu4/post-image.sh"
+BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_4_14=y
+BR2_LINUX_KERNEL=y
+BR2_LINUX_KERNEL_CUSTOM_GIT=y
+BR2_LINUX_KERNEL_CUSTOM_REPO_URL="https://github.com/hardkernel/linux.git"
+BR2_LINUX_KERNEL_CUSTOM_REPO_VERSION="4.14.16-104"
+BR2_LINUX_KERNEL_DEFCONFIG="odroidxu4"
+BR2_LINUX_KERNEL_DTS_SUPPORT=y
+BR2_LINUX_KERNEL_INTREE_DTS_NAME="exynos5422-odroidxu4"
+BR2_TARGET_ROOTFS_EXT2=y
+BR2_TARGET_ROOTFS_EXT2_4=y
+# BR2_TARGET_ROOTFS_TAR is not set
+BR2_TARGET_UBOOT=y
+BR2_TARGET_UBOOT_BUILD_SYSTEM_KCONFIG=y
+BR2_TARGET_UBOOT_CUSTOM_GIT=y
+BR2_TARGET_UBOOT_CUSTOM_REPO_URL="https://github.com/hardkernel/u-boot.git"
+BR2_TARGET_UBOOT_CUSTOM_REPO_VERSION="88af53fbcef8386cb4d5f04c19f4b2bcb69e90ca"
+BR2_TARGET_UBOOT_BOARD_DEFCONFIG="odroid-xu4"
+BR2_TARGET_UBOOT_NEEDS_DTC=y
+BR2_TARGET_UBOOT_FORMAT_DTB_BIN=y
+BR2_TARGET_UBOOT_SPL=y
+BR2_TARGET_UBOOT_SPL_NAME="sd_fuse/bl1.bin.hardkernel sd_fuse/bl2.bin.hardkernel.720k_uboot sd_fuse/tzsw.bin.hardkernel "
+BR2_PACKAGE_HOST_DOSFSTOOLS=y
+BR2_PACKAGE_HOST_GENIMAGE=y
+BR2_PACKAGE_HOST_MTOOLS=y
projects / buildroot.git / commitdiff