--- /dev/null
+dnl Fix Autoconf-2.59 bugs: by overriding broken internal
+dnl Autoconf macros with backports of the 2.60+ fix.
+dnl - AC_CONFIG_SUBDIRS whitespace mangling,
+dnl - more lenient precious variable checks
+dnl
+dnl This file should be a no-op for Autoconf versions != 2.59.
+dnl It can be removed once the complete tree has moved to a
+dnl newer Autoconf version.
+
+dnl m4_PACKAGE_VERSION is an undocumented Autoconf macro.
+dnl We use it because this fix is intended for 2.59 only.
+dnl A feature test for the broken AC_CONFIG_SUBDIRS instead
+dnl would be better but is tricky.
+dnl
+dnl Use ifdef/ifelse over m4_ifdef/m4_ifelse to be clean for 2.13.
+dnl Redefine AC_CONFIG_SUBDIRS so aclocal pulls in this file
+dnl when needed.
+
+ifdef([m4_PACKAGE_VERSION],
+[ifelse(m4_PACKAGE_VERSION, [2.59], [
+
+dnl AC_DEFUN a commonly used macro so this file is picked up.
+m4_copy([AC_PREREQ], [_AC_PREREQ])
+AC_DEFUN([AC_PREREQ], [frob])
+m4_copy([_AC_PREREQ], [AC_PREREQ])
+
+dnl Override the broken macro.
+# _AC_OUTPUT_SUBDIRS
+# ------------------
+# This is a subroutine of AC_OUTPUT, but it does not go into
+# config.status, rather, it is called after running config.status.
+m4_define([_AC_OUTPUT_SUBDIRS],
+[
+#
+# CONFIG_SUBDIRS section, as fixed in confsubdir.m4.
+#
+if test "$no_recursion" != yes; then
+
+ # Remove --cache-file and --srcdir arguments so they do not pile up.
+ ac_sub_configure_args=
+ ac_prev=
+ eval "set x $ac_configure_args"
+ shift
+ for ac_arg
+ do
+ if test -n "$ac_prev"; then
+ ac_prev=
+ continue
+ fi
+ case $ac_arg in
+ -cache-file | --cache-file | --cache-fil | --cache-fi \
+ | --cache-f | --cache- | --cache | --cach | --cac | --ca | --c)
+ ac_prev=cache_file ;;
+ -cache-file=* | --cache-file=* | --cache-fil=* | --cache-fi=* \
+ | --cache-f=* | --cache-=* | --cache=* | --cach=* | --cac=* | --ca=* \
+ | --c=*)
+ ;;
+ --config-cache | -C)
+ ;;
+ -srcdir | --srcdir | --srcdi | --srcd | --src | --sr)
+ ac_prev=srcdir ;;
+ -srcdir=* | --srcdir=* | --srcdi=* | --srcd=* | --src=* | --sr=*)
+ ;;
+ -prefix | --prefix | --prefi | --pref | --pre | --pr | --p)
+ ac_prev=prefix ;;
+ -prefix=* | --prefix=* | --prefi=* | --pref=* | --pre=* | --pr=* | --p=*)
+ ;;
+ *)
+ case $ac_arg in
+ *\'*) ac_arg=`echo "$ac_arg" | sed "s/'/'\\\\\\\\''/g"` ;;
+ esac
+ ac_sub_configure_args="$ac_sub_configure_args '$ac_arg'" ;;
+ esac
+ done
+
+ # Always prepend --prefix to ensure using the same prefix
+ # in subdir configurations.
+ ac_arg="--prefix=$prefix"
+ case $ac_arg in
+ *\'*) ac_arg=`echo "$ac_arg" | sed "s/'/'\\\\\\\\''/g"` ;;
+ esac
+ ac_sub_configure_args="$ac_arg $ac_sub_configure_args"
+
+ ac_popdir=`pwd`
+ for ac_dir in : $subdirs; do test "x$ac_dir" = x: && continue
+
+ # Do not complain, so a configure script can configure whichever
+ # parts of a large source tree are present.
+ test -d "$srcdir/$ac_dir" || continue
+
+ AC_MSG_NOTICE([configuring in $ac_dir])
+ AS_MKDIR_P(["$ac_dir"])
+ _AC_SRCPATHS(["$ac_dir"])
+
+ cd "$ac_dir"
+
+ # Check for guested configure; otherwise get Cygnus style configure.
+ if test -f "$ac_srcdir/configure.gnu"; then
+ ac_sub_configure=$ac_srcdir/configure.gnu
+ elif test -f "$ac_srcdir/configure"; then
+ ac_sub_configure=$ac_srcdir/configure
+ elif test -f "$ac_srcdir/configure.in"; then
+ # This should be Cygnus configure.
+ ac_sub_configure=$ac_aux_dir/configure
+ else
+ AC_MSG_WARN([no configuration information is in $ac_dir])
+ ac_sub_configure=
+ fi
+
+ # The recursion is here.
+ if test -n "$ac_sub_configure"; then
+ # Make the cache file name correct relative to the subdirectory.
+ case $cache_file in
+ [[\\/]]* | ?:[[\\/]]* ) ac_sub_cache_file=$cache_file ;;
+ *) # Relative path.
+ ac_sub_cache_file=$ac_top_builddir$cache_file ;;
+ esac
+
+ AC_MSG_NOTICE([running $SHELL $ac_sub_configure $ac_sub_configure_args --cache-file=$ac_sub_cache_file --srcdir=$ac_srcdir])
+ # The eval makes quoting arguments work.
+ eval "\$SHELL \"\$ac_sub_configure\" $ac_sub_configure_args \
+ --cache-file=\"\$ac_sub_cache_file\" --srcdir=\"\$ac_srcdir\"" ||
+ AC_MSG_ERROR([$ac_sub_configure failed for $ac_dir])
+ fi
+
+ cd "$ac_popdir"
+ done
+fi
+])# _AC_OUTPUT_SUBDIRS
+
+# _AC_ARG_VAR_VALIDATE
+# --------------------
+# The code is the same as autoconf 2.59, but with a more lenient check
+# on precious variables that has been added in autoconf 2.62.
+m4_define([_AC_ARG_VAR_VALIDATE],
+[# Check that the precious variables saved in the cache have kept the same
+# value.
+ac_cache_corrupted=false
+for ac_var in `(set) 2>&1 |
+ sed -n 's/^ac_env_\([[a-zA-Z_0-9]]*\)_set=.*/\1/p'`; do
+ eval ac_old_set=\$ac_cv_env_${ac_var}_set
+ eval ac_new_set=\$ac_env_${ac_var}_set
+ eval ac_old_val="\$ac_cv_env_${ac_var}_value"
+ eval ac_new_val="\$ac_env_${ac_var}_value"
+ case $ac_old_set,$ac_new_set in
+ set,)
+ AS_MESSAGE([error: `$ac_var' was set to `$ac_old_val' in the previous run], 2)
+ ac_cache_corrupted=: ;;
+ ,set)
+ AS_MESSAGE([error: `$ac_var' was not set in the previous run], 2)
+ ac_cache_corrupted=: ;;
+ ,);;
+ *)
+ if test "x$ac_old_val" != "x$ac_new_val"; then
+ # differences in whitespace do not lead to failure.
+ ac_old_val_w=`echo x $ac_old_val`
+ ac_new_val_w=`echo x $ac_new_val`
+ if test "$ac_old_val_w" != "$ac_new_val_w"; then
+ AS_MESSAGE([error: `$ac_var' has changed since the previous run:], 2)
+ ac_cache_corrupted=:
+ else
+ AS_MESSAGE([warning: ignoring whitespace changes in `$ac_var' since the previous run:], 2)
+ eval $ac_var=\$ac_old_val
+ fi
+ AS_MESSAGE([ former value: `$ac_old_val'], 2)
+ AS_MESSAGE([ current value: `$ac_new_val'], 2)
+ fi;;
+ esac
+ # Pass precious variables to config.status.
+ if test "$ac_new_set" = set; then
+ case $ac_new_val in
+dnl If you change this globbing pattern, test it on an old shell --
+dnl it's sensitive. Putting any kind of quote in it causes syntax errors.
+[ *" "*|*" "*|*[\[\]\~\#\$\^\&\*\(\)\{\}\\\|\;\<\>\?\"\']*)]
+ ac_arg=$ac_var=`echo "$ac_new_val" | sed "s/'/'\\\\\\\\''/g"` ;;
+ *) ac_arg=$ac_var=$ac_new_val ;;
+ esac
+ case " $ac_configure_args " in
+ *" '$ac_arg' "*) ;; # Avoid dups. Use of quotes ensures accuracy.
+ *) ac_configure_args="$ac_configure_args '$ac_arg'" ;;
+ esac
+ fi
+done
+if $ac_cache_corrupted; then
+ AS_MESSAGE([error: changes in the environment can compromise the build], 2)
+ AS_ERROR([run `make distclean' and/or `rm $cache_file' and start over])
+fi
+])# _AC_ARG_VAR_VALIDATE
+])])
,);;
*)
if test "x$ac_old_val" != "x$ac_new_val"; then
- { echo "$as_me:$LINENO: error: \`$ac_var' has changed since the previous run:" >&5
+ # differences in whitespace do not lead to failure.
+ ac_old_val_w=`echo x $ac_old_val`
+ ac_new_val_w=`echo x $ac_new_val`
+ if test "$ac_old_val_w" != "$ac_new_val_w"; then
+ { echo "$as_me:$LINENO: error: \`$ac_var' has changed since the previous run:" >&5
echo "$as_me: error: \`$ac_var' has changed since the previous run:" >&2;}
- { echo "$as_me:$LINENO: former value: $ac_old_val" >&5
-echo "$as_me: former value: $ac_old_val" >&2;}
- { echo "$as_me:$LINENO: current value: $ac_new_val" >&5
-echo "$as_me: current value: $ac_new_val" >&2;}
- ac_cache_corrupted=:
+ ac_cache_corrupted=:
+ else
+ { echo "$as_me:$LINENO: warning: ignoring whitespace changes in \`$ac_var' since the previous run:" >&5
+echo "$as_me: warning: ignoring whitespace changes in \`$ac_var' since the previous run:" >&2;}
+ eval $ac_var=\$ac_old_val
+ fi
+ { echo "$as_me:$LINENO: former value: \`$ac_old_val'" >&5
+echo "$as_me: former value: \`$ac_old_val'" >&2;}
+ { echo "$as_me:$LINENO: current value: \`$ac_new_val'" >&5
+echo "$as_me: current value: \`$ac_new_val'" >&2;}
fi;;
esac
# Pass precious variables to config.status.
noconfigdirs="$noconfigdirs ld target-libgloss ${libgcj}"
;;
avr-*-*)
- noconfigdirs="$noconfigdirs target-libiberty target-libstdc++-v3 ${libgcj}"
+ noconfigdirs="$noconfigdirs target-libiberty target-libstdc++-v3 ${libgcj} target-libssp"
;;
bfin-*-*)
noconfigdirs="$noconfigdirs gdb"
projects / binutils-gdb.git / commitdiff