* sim/cris/hw/rv-n-cris: New directory with tests.
+2006-04-03 Hans-Peter Nilsson <hp@axis.com>
+
+ * sim/cris/hw: New directory for subdirectories with tests.
+ * sim/cris/hw/rv-n-cris: New directory with tests.
+
2006-04-02 Hans-Peter Nilsson <hp@axis.com>
* sim/cris/asm/testutils.inc (test_h_mem): Use register prefix.
--- /dev/null
+#mach: crisv32
+#sim(crisv32): --hw-device "/rv/host localhost"
+
+# Check that we trivially resolve a hostname.
+
+#r @,@srcdir@/trivial4.r
+
+ .include "trivial4.ms"
--- /dev/null
+#mach: crisv10 crisv32
+#sim(crisv10): --hw-device "/rv/trace? true"
+#sim(crisv32): --hw-device "/rv/trace? true"
+#output: /rv: WD\n
+#output: /rv: REG R 0xd0000032\n
+#output: /rv: := 0xabcdef01\n
+#output: /rv: IRQ 0x4\n
+#output: /rv: REG R 0xd0000036\n
+#output: /rv: := 0x76543210\n
+#output: /rv: REG R 0xd0000036\n
+#output: /rv: := 0x76543211\n
+#output: /rv: REG R 0xd0000030\n
+#output: /rv: IRQ 0x0\n
+#output: /rv: := 0xeeff4455\n
+#output: pass\n
+
+# Trivial test of interrupts.
+# Locations of IRQ notifiers above depend on when the simulator is
+# polled; adjustments may be needed (after checking that no poll is
+# gone due to a bug!)
+
+#r W,
+#r r,a8832,abcdef01
+#r I,4
+#r r,a8836,76543210
+#r r,a8836,76543211
+#r I,0
+#r r,a8830,eeff4455
+
+ .lcomm dummy,4
+
+ .include "testutils.inc"
+ start
+ .if ..asm.arch.cris.v32
+ move irqvec1,$ebp
+ .else
+ move irqvec1,$ibr
+ .endif
+ test_h_mem 0xabcdef01 0xd0000032
+ nop
+ nop
+ test_h_mem 0x76543210 0xd0000036
+ ei
+ test_h_mem 0,dummy
+wouldreturnhere:
+ nop
+killme:
+ fail
+
+returnhere:
+ test_h_mem 0x76543211 0xd0000036
+ test_h_mem 0xeeff4455 0xd0000030
+ pass
+
+irq0x33:
+ .if ..asm.arch.cris.v32
+ test_h_dr wouldreturnhere,$erp
+ move returnhere,$erp
+ rete
+ rfe
+ .else
+ move $dccr,$r0
+ test_h_dr wouldreturnhere,$irp
+ move returnhere,$irp
+ reti
+ move $r0,$dccr
+ .endif
+
+ singlevec irqvec1,0x33,irq0x33
--- /dev/null
+#mach: crisv10 crisv32
+#sim(crisv10): --hw-device "/rv/trace? true" --hw-device "/rv/intmultiple 0xaa"
+#sim(crisv32): --hw-device "/rv/trace? true" --hw-device "/rv/intmultiple 0xaa"
+#output: /rv: WD\n
+#output: /rv: REG R 0xd0000032\n
+#output: /rv: := 0xabcdef01\n
+#output: /rv: IRQ 0xaa\n
+#output: /rv: REG R 0xd0000036\n
+#output: /rv: := 0x76543210\n
+#output: /rv: REG R 0xd0000030\n
+#output: /rv: IRQ 0x0\n
+#output: /rv: := 0xeeff4455\n
+#output: pass\n
+
+# Primarily to test multiple-int-bits set in dv-rv.c.
+
+#r W,
+#r r,a8832,abcdef01
+#r I,6
+#r r,a8836,76543210
+#r I,0
+#r r,a8830,eeff4455
+
+ .lcomm dummy,4
+
+ .include "testutils.inc"
+ start
+ test_h_mem 0xabcdef01 0xd0000032
+ .if ..asm.arch.cris.v32
+ move irqvec1,$ebp
+ .else
+ move irqvec1,$ibr
+ .endif
+ ei
+ test_h_mem 0,dummy
+killme:
+ fail
+
+irq0xea:
+ test_h_mem 0x76543210 0xd0000036
+ test_h_mem 0xeeff4455 0xd0000030
+ pass
+
+ singlevec irqvec1,0xea,irq0xea
--- /dev/null
+#mach: crisv10 crisv32
+#sim(crisv10): --hw-device "/rv/trace? true" --hw-device "/rv/intmultiple 0xaa"
+#sim(crisv32): --hw-device "/rv/trace? true" --hw-device "/rv/intmultiple 0xaa"
+#output: /rv: WD\n
+#output: /rv: REG R 0xd0000032\n
+#output: /rv: := 0xabcdef01\n
+#output: /rv: IRQ 0xaa\n
+#output: /rv: IRQ 0xaa\n
+#output: /rv: REG R 0xd0000036\n
+#output: /rv: := 0x76543210\n
+#output: /rv: REG R 0xd0000030\n
+#output: /rv: IRQ 0x0\n
+#output: /rv: := 0xeeff4455\n
+#output: pass\n
+
+# Much like irq2.ms, but modified to check same-int-port-value-twice.
+
+#r W,
+#r r,a8832,abcdef01
+#r I,6
+#r I,6
+#r r,a8836,76543210
+#r I,0
+#r r,a8830,eeff4455
+
+ .lcomm dummy,4
+
+ .include "testutils.inc"
+ start
+ test_h_mem 0xabcdef01 0xd0000032
+ .if ..asm.arch.cris.v32
+ move irqvec1,$ebp
+ .else
+ move irqvec1,$ibr
+ .endif
+ ei
+ test_h_mem 0,dummy
+killme:
+ fail
+
+irq0xea:
+ test_h_mem 0x76543210 0xd0000036
+ test_h_mem 0xeeff4455 0xd0000030
+ pass
+
+ singlevec irqvec1,0xea,irq0xea
--- /dev/null
+#mach: crisv10 crisv32
+#sim(crisv10): --hw-device "/rv/trace? true" --hw-device "/cris/multiple-int ignore_previous"
+#sim(crisv32): --hw-device "/rv/trace? true" --hw-device "/cris/multiple-int ignore_previous"
+#output: /rv: WD\n
+#output: /rv: REG R 0xd0000032\n
+#output: /rv: := 0xabcdef01\n
+#output: /rv: IRQ 0x4\n
+#output: /rv: IRQ 0x8\n
+#output: /rv: REG R 0xd0000036\n
+#output: /rv: := 0x76543210\n
+#output: /rv: REG R 0xd0000030\n
+#output: /rv: IRQ 0x0\n
+#output: /rv: := 0xeeff4455\n
+#output: pass\n
+
+# Much like irq3.ms, but modified to test multiple-int ignore_previous.
+
+#r W,
+#r r,a8832,abcdef01
+#r I,4
+#r I,8
+#r r,a8836,76543210
+#r I,0
+#r r,a8830,eeff4455
+
+ .lcomm dummy,4
+
+ .include "testutils.inc"
+ start
+ test_h_mem 0xabcdef01 0xd0000032
+ .if ..asm.arch.cris.v32
+ move irqvec1,$ebp
+ .else
+ move irqvec1,$ibr
+ .endif
+ ei
+ test_h_mem 0,dummy
+killme:
+ fail
+
+irq0x34:
+ test_h_mem 0x76543210 0xd0000036
+ test_h_mem 0xeeff4455 0xd0000030
+ pass
+
+ singlevec irqvec1,0x34,irq0x34
--- /dev/null
+#mach: crisv10 crisv32
+#sim(crisv10): --hw-device "/rv/trace? true" --hw-device "/cris/multiple-int 0xae"
+#sim(crisv32): --hw-device "/rv/trace? true" --hw-device "/cris/multiple-int 0xae"
+#output: /rv: WD\n
+#output: /rv: REG R 0xd0000032\n
+#output: /rv: := 0xabcdef01\n
+#output: /rv: IRQ 0x4\n
+#output: /rv: IRQ 0x8\n
+#output: /rv: REG R 0xd0000036\n
+#output: /rv: := 0x76543210\n
+#output: /rv: REG R 0xd0000030\n
+#output: /rv: IRQ 0x0\n
+#output: /rv: := 0xeeff4455\n
+#output: pass\n
+
+# Much like irq4.ms, but modified to test vector case for multiple-int.
+
+#r W,
+#r r,a8832,abcdef01
+#r I,4
+#r I,8
+#r r,a8836,76543210
+#r I,0
+#r r,a8830,eeff4455
+
+ .lcomm dummy,4
+
+ .include "testutils.inc"
+ start
+ test_h_mem 0xabcdef01 0xd0000032
+ .if ..asm.arch.cris.v32
+ move irqvec1,$ebp
+ .else
+ move irqvec1,$ibr
+ .endif
+ ei
+ test_h_mem 0,dummy
+killme:
+ fail
+
+irq0xae:
+ test_h_mem 0x76543210 0xd0000036
+ test_h_mem 0xeeff4455 0xd0000030
+ pass
+
+ singlevec irqvec1,0xae,irq0xae
--- /dev/null
+#mach: crisv10 crisv32
+#sim(crisv10): --hw-device "/rv/trace? true"
+#sim(crisv32): --hw-device "/rv/trace? true"
+#output: /rv: WD\n
+#output: /rv: MBOX H 0x1001d..0x10037\n
+#output: /rv: 0x10020: 12 23 34 56 79 8a bd de\n
+#output: /rv: 0x10028: fb ad ba db ad 56 78 9a\n
+#output: /rv: 0x10030: fd e1 23 45 66 54 32 1a\n
+#output: /rv: -> 0x1001d..0x10027\n
+#output: /rv: 0x10020: aa 55 77 88 32 10 ee cc\n
+#output: /rv: MBOX P 0xfffd..0x1001f\n
+#output: /rv: 0x10000: aa 55 12 23 34 56 79 8a\n
+#output: /rv: 0x10008: bd de fb ad ba db ad 56\n
+#output: /rv: 0x10010: 78 9a fd e1 23 45 66 54\n
+#output: /rv: 0x10018: 32 1a ac cb be ed db ed\n
+#output: /rv: -> 0xfffd..0x10017\n
+#output: /rv: 0x10000: 11 22 56 78 ee dd 12 ab\n
+#output: /rv: 0x10008: 55 aa ee 00 42 12 27 98\n
+#output: /rv: 0x10010: 88 55 22 33 66 77 22 45\n
+#output: /rv: REG R 0xd0000038\n
+#output: /rv: := 0x76543211\n
+#output: pass\n
+
+# Trivial test of mailbox commands.
+
+#r W,
+#r i,1b000512233456798abddefbadbadbad56789afde123456654321a
+#r o,0b0005aa5577883210eecc
+#r i,230006aa5512233456798abddefbadbadbad56789afde123456654321aaccbbeeddbed
+#r o,1b000511225678eedd12ab55aaee00421227988855223366772245
+#r r,a8838,76543211
+
+ .include "testutils.inc"
+ start
+ move.w 0x1b,$r0
+ move.d 0x1001d,$r1
+ move.w $r0,[$r1+]
+ moveq 5,$r0
+ move.b $r0,[$r1]
+ mvi_h_mem 0x56342312 0x10020
+ mvi_h_mem 0xdebd8a79 0x10024
+ mvi_h_mem 0xdbbaadfb 0x10028
+ mvi_h_mem 0x9a7856ad 0x1002c
+ mvi_h_mem 0x4523e1fd 0x10030
+ mvi_h_mem 0x1a325466 0x10034
+
+ mvi_h_mem 0x1001d 0xc000f000
+
+ move.d 0x1001d,$r0
+ movu.w [$r0+],$r1
+ test_h_gr 0xb $r1
+ movu.b [$r0],$r1
+ test_h_gr 0x5 $r1
+ test_h_mem 0x887755aa 0x10020
+ test_h_mem 0xccee1032 0x10024
+
+ move.w 0x23,$r0
+ move.d 0xfffd,$r1
+ move.w $r0,[$r1+]
+ moveq 6,$r0
+ move.b $r0,[$r1]
+ mvi_h_mem 0x231255aa 0x10000
+ mvi_h_mem 0x8a795634 0x10004
+ mvi_h_mem 0xadfbdebd 0x10008
+ mvi_h_mem 0x56addbba 0x1000c
+ mvi_h_mem 0xe1fd9a78 0x10010
+ mvi_h_mem 0x54664523 0x10014
+ mvi_h_mem 0xcbac1a32 0x10018
+ mvi_h_mem 0xeddbedbe 0x1001c
+
+ mvi_h_mem 0xfffd 0xc000f000
+
+ move.d 0xfffd,$r0
+ movu.w [$r0+],$r1
+ test_h_gr 0x1b $r1
+ movu.b [$r0],$r1
+ test_h_gr 0x6 $r1
+ test_h_mem 0x78562211 0x10000
+ test_h_mem 0xab12ddee 0x10004
+ test_h_mem 0x00eeaa55 0x10008
+ test_h_mem 0x98271242 0x1000c
+ test_h_mem 0x33225588 0x10010
+ test_h_mem 0x45227766 0x10014
+
+ test_h_mem 0x76543211 0xd0000038
+ pass
+
+ .fill 65536*2+128,1,0
--- /dev/null
+#mach: crisv10 crisv32
+#sim(crisv10): --hw-device "/rv/trace? true"
+#sim(crisv32): --hw-device "/rv/trace? true"
+#output: /rv: WD\n
+#output: /rv: REG R 0xd0000036\n
+#output: /rv: := 0x76543210\n
+#output: /rv: DMA W 0x20020..0x2003f\n
+#output: /rv: 0x20020: 12 23 34 56\n
+#output: /rv: 0x20024: 79 8a bd de\n
+#output: /rv: 0x20028: fb ad ba db\n
+#output: /rv: 0x2002c: ad 56 78 9a\n
+#output: /rv: 0x20030: fd e1 23 45\n
+#output: /rv: 0x20034: 66 54 32 1a\n
+#output: /rv: 0x20038: ac cb be ed\n
+#output: /rv: 0x2003c: db ed aa da\n
+#output: /rv: REG R 0xd0000038\n
+#output: /rv: := 0x76543211\n
+#output: /rv: DMA R 0x20000..0x2001f\n
+#output: /rv: 0x20000: aa 55 12 23\n
+#output: /rv: 0x20004: 34 56 79 8a\n
+#output: /rv: 0x20008: bd de fb ad\n
+#output: /rv: 0x2000c: ba db ad 56\n
+#output: /rv: 0x20010: 78 9a fd e1\n
+#output: /rv: 0x20014: 23 45 66 54\n
+#output: /rv: 0x20018: 32 1a ac cb\n
+#output: /rv: 0x2001c: be ed db ed\n
+#output: /rv: IRQ 0x8\n
+#output: /rv: REG R 0xd0000038\n
+#output: /rv: := 0x76543212\n
+#output: pass\n
+
+# Trivial test of DMA.
+
+# Locations of IRQ notifiers above depend on when the simulator is
+# polled; adjustments may be needed (after checking that no poll is
+# gone due to a bug!)
+
+#r W,
+#r r,a8836,76543210
+#r s,e020,12233456798abddefbadbadbad56789afde123456654321aaccbbeeddbedaada
+#r r,a8838,76543211
+#r l,e000,aa5512233456798abddefbadbadbad56789afde123456654321aaccbbeeddbed
+#r I,8
+#r r,a8838,76543212
+
+ .include "testutils.inc"
+ start
+ test_h_mem 0x76543210 0xd0000036
+
+ move.d 0x2003f,$r1
+ move.d 0x10000,$r3
+0:
+ test.b [$r1]
+ bne 1f
+ subq 1,$r3
+ bne 0b
+ nop
+
+1:
+ test_h_mem 0x56342312 0x20020
+ test_h_mem 0xdebd8a79 0x20024
+ test_h_mem 0xdbbaadfb 0x20028
+ test_h_mem 0x9a7856ad 0x2002c
+ test_h_mem 0x4523e1fd 0x20030
+ test_h_mem 0x1a325466 0x20034
+ test_h_mem 0xedbecbac 0x20038
+ test_h_mem 0xdaaaeddb 0x2003c
+
+ move.d 0x20020,$r0
+ move.d 0x20000,$r1
+ move.w 0x55aa,$r2
+ move.w $r2,[r1+]
+ .rept 8
+ move.d [$r0+],$r2
+ move.d $r2,[$r1+]
+ .endr
+
+ test_h_mem 0x76543211 0xd0000038
+
+ .if ..asm.arch.cris.v32
+ move irqvec1,$ebp
+ .else
+ move irqvec1,$ibr
+ .endif
+ ei
+ move.d 0x100000,$r9
+0:
+ subq 1,$r9
+ bne 0b
+ nop
+killme:
+ fail
+
+irq0x34:
+ test_h_mem 0x76543212 0xd0000038
+ pass
+
+ .fill 65536*2+128,1,0
+
+ singlevec irqvec1,0x34,irq0x34
--- /dev/null
+#mach: crisv10 crisv32
+#sim(crisv10): --hw-device "/rv/trace? true"
+#sim(crisv32): --hw-device "/rv/trace? true"
+#output: /rv: WD\n
+#output: /rv: REG R 0xd0000036\n
+#output: /rv: := 0x76543210\n
+#output: /rv: DMA W 0x20020..0x20043\n
+#output: /rv: 0x20020: 12 23 34 56\n
+#output: /rv: 0x20024: 79 8a bd de\n
+#output: /rv: 0x20028: fb ad ba db\n
+#output: /rv: 0x2002c: ad 56 78 9a\n
+#output: /rv: 0x20030: fd e1 23 45\n
+#output: /rv: 0x20034: 66 54 32 1a\n
+#output: /rv: 0x20038: ac cb be ed\n
+#output: /rv: 0x2003c: db ed aa da\n
+#output: /rv: 0x20040: 00 aa bb cc\n
+#output: /rv: REG R 0xd0000038\n
+#output: /rv: := 0x76543211\n
+#output: /rv: DMA R 0x20000..0x20023\n
+#output: /rv: 0x20000: aa 55 12 23\n
+#output: /rv: 0x20004: 34 56 79 8a\n
+#output: /rv: 0x20008: bd de fb ad\n
+#output: /rv: 0x2000c: ba db ad 56\n
+#output: /rv: 0x20010: 78 9a fd e1\n
+#output: /rv: 0x20014: 23 45 66 54\n
+#output: /rv: 0x20018: 32 1a ac cb\n
+#output: /rv: 0x2001c: be ed db ed\n
+#output: /rv: 0x20020: aa da 00 aa\n
+#output: /rv: IRQ 0x8\n
+#output: /rv: REG R 0xd0000038\n
+#output: /rv: := 0x76543212\n
+#output: pass\n
+
+# This is a slight variation of mem1.ms just to trig the "buffer needs
+# to be malloced for large request size" for the DMA request.
+
+# Locations of IRQ notifiers above depend on when the simulator is
+# polled; adjustments may be needed (after checking that no poll is
+# gone due to a bug!)
+
+#r W,
+#r r,a8836,76543210
+#r s,e020,12233456798abddefbadbadbad56789afde123456654321aaccbbeeddbedaada00aabbcc
+#r r,a8838,76543211
+#r l,e000,aa5512233456798abddefbadbadbad56789afde123456654321aaccbbeeddbedaada00aa
+#r I,8
+#r r,a8838,76543212
+
+ .include "testutils.inc"
+ start
+ test_h_mem 0x76543210 0xd0000036
+
+ move.d 0x2003f,$r1
+ move.d 0x10000,$r3
+0:
+ test.b [$r1]
+ bne 1f
+ subq 1,$r3
+ bne 0b
+ nop
+
+1:
+ test_h_mem 0x56342312 0x20020
+ test_h_mem 0xdebd8a79 0x20024
+ test_h_mem 0xdbbaadfb 0x20028
+ test_h_mem 0x9a7856ad 0x2002c
+ test_h_mem 0x4523e1fd 0x20030
+ test_h_mem 0x1a325466 0x20034
+ test_h_mem 0xedbecbac 0x20038
+ test_h_mem 0xdaaaeddb 0x2003c
+ test_h_mem 0xccbbaa00 0x20040
+
+ move.d 0x20020,$r0
+ move.d 0x20000,$r1
+ move.w 0x55aa,$r2
+ move.w $r2,[r1+]
+ .rept 9
+ move.d [$r0+],$r2
+ move.d $r2,[$r1+]
+ .endr
+
+ test_h_mem 0x76543211 0xd0000038
+
+ .if ..asm.arch.cris.v32
+ move irqvec1,$ebp
+ .else
+ move irqvec1,$ibr
+ .endif
+ ei
+ move.d 0x100000,$r9
+0:
+ subq 1,$r9
+ bne 0b
+ nop
+killme:
+ fail
+
+irq0x34:
+ test_h_mem 0x76543212 0xd0000038
+ pass
+
+ .fill 65536*2+128,1,0
+
+ singlevec irqvec1,0x34,irq0x34
--- /dev/null
+#mach: crisv32
+#sim(crisv32): --hw-device "/rv/dummy 0x12"
+
+# A variant of trivial2.ms to check that the right thing happens when
+# we reach the poll function with a dummy device.
+
+ .include "testutils.inc"
+ start
+ move.d 0xd0000000,$r0
+ move.d [$r0+],$r3
+ cmp.d 0x12121212,$r3
+ beq ok
+ nop
+bad:
+ fail
+ok:
+ move.d 0x10000,$r10
+0:
+ bne 0b
+ subq 1,$r10
+
+ pass
--- /dev/null
+; Trivial target simulator program that just exits.
+ .include "testutils.inc"
+ startnostack
+ quit
--- /dev/null
+# Copyright (C) 2006 Free Software Foundation, Inc.
+#
+# This program is free software; you can redistribute it and/or modify
+# it under the terms of the GNU General Public License as published by
+# the Free Software Foundation; either version 2 of the License, or
+# (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA.
+
+# Miscellaneous CRIS simulator testcases in assembly code, testing
+# dv-rv.c and dv-cris.c functions.
+
+# Check whether dv-rv and dv-cris are present.
+
+proc sim_has_rv_and_cris {} {
+ global srcdir
+ global subdir
+ global SIMFLAGS
+ global global_as_options
+ global global_ld_options
+ global global_sim_options
+
+ # We need to assemble and link a trivial program and pass that, in
+ # order to test successful exit.
+
+ # A bit of duplication here for the assembling and linking part;
+ # what we want to do it to run the simulator without affecting the
+ # PASS/FAIL counters, and we can use e.g. run_sim_test for that.
+
+ if ![info exists global_as_options] {
+ set global_as_options ""
+ }
+ if ![info exists global_ld_options] {
+ set global_ld_options ""
+ }
+ if ![info exists global_sim_options] {
+ set global_sim_options ""
+ }
+
+ set comp_output [target_assemble $srcdir/$subdir/quit.s quit.o \
+ "-I$srcdir/$subdir $global_as_options"]
+
+ if ![string match "" $comp_output] {
+ verbose -log "$comp_output" 3
+ fail "rv sim test setup (assembling)"
+ return 0
+ }
+
+ set comp_output [target_link quit.o quit.x "$global_ld_options"]
+
+ if ![string match "" $comp_output] {
+ verbose -log "$comp_output" 3
+ fail "rv sim test setup (linking)"
+ return 0
+ }
+
+ set result \
+ [sim_run quit.x \
+ "$global_sim_options --hw-device rv --hw-device cris --hw-info" \
+ "" "" ""]
+ set return_code [lindex $result 0]
+ set output [lindex $result 1]
+
+ if { "$return_code" == "pass" } {
+ return 1
+ }
+
+ return 0
+}
+
+# Similar to slurp_options, but lines are fixed format "^#r ..." (not
+# "^#{ws}*r:{ws}+" to avoid intruding on slurp_options syntax). Only
+# trailing whitespace of the "..." is trimmed. Beware that lines
+# including parameters may not contain ":".
+
+proc slurp_rv { file } {
+ if [catch { set f [open $file r] } x] {
+ #perror "couldn't open `$file': $x"
+ perror "$x"
+ return -1
+ }
+ set rv_array {}
+ # whitespace expression
+ set ws {[ ]*}
+ # whitespace is ignored at the end of a line.
+ set pat "^#r (.*)$ws\$"
+ # Allow arbitrary lines until the first option is seen.
+ set seen_opt 0
+ while { [gets $f line] != -1 } {
+ set line [string trim $line]
+ # Whitespace here is space-tab.
+ if [regexp $pat $line xxx cmd] {
+ # match!
+ lappend rv_array $cmd
+ set seen_opt 1
+ } else {
+ if { $seen_opt } {
+ break
+ }
+ }
+ }
+ close $f
+ return $rv_array
+}
+
+# The main test loop.
+
+if [istarget cris*-*-*] {
+ global ASFLAGS_FOR_TARGET
+ set has_rv_and_cris [sim_has_rv_and_cris]
+ global global_as_options
+ global global_ld_options
+ global global_sim_options
+
+ set saved_global_sim_options $global_sim_options
+ set saved_global_ld_options $global_ld_options
+ set rvdummy "[file dirname [board_info target sim]]/rvdummy"
+
+ # All machines we test and the corresponding assembler option.
+ # We'll only ever test v10 and higher here.
+
+ set combos {{"crisv10" "--march=v10 --no-mul-bug-abort"}
+ {"crisv32" "--march=v32"}}
+
+ # We need to pass different assembler flags for each machine.
+ # Specifying it here rather than adding a specifier to each and every
+ # test-file is preferrable.
+
+ foreach combo $combos {
+ set mach [lindex $combo 0]
+ set ASFLAGS_FOR_TARGET "[lindex $combo 1]"
+
+ # The .ms suffix is for "miscellaneous .s".
+ foreach src [lsort [glob -nocomplain $srcdir/$subdir/*.ms]] {
+
+ # If we're only testing specific files and this isn't one of them,
+ # skip it.
+ if ![runtest_file_p $runtests $src] {
+ continue
+ }
+
+ # Whoever runs the test should be alerted that not all
+ # testcases have been checked; that's why we do the loop
+ # and don't just return at the top.
+ if !$has_rv_and_cris {
+ untested $src
+ continue
+ }
+
+ set sim_defaults "--hw-file $srcdir/$subdir/std.dev"
+ set ld_defaults "--section-start=.text=0"
+
+ # We parse options an extra time besides in run_sim_test,
+ # to determine if our defaults should be overridden.
+
+ set opt_array [slurp_options $src]
+ foreach i $opt_array {
+ set opt_name [lindex $i 0]
+ set opt_machs [lindex $i 1]
+ set opt_val [lindex $i 2]
+
+ # Allow concatenating to the default options by
+ # specifying a mach.
+ if { $opt_name == "sim" && $opt_machs == "" } {
+ set sim_defaults ""
+ }
+
+ if { $opt_name == "ld" && $opt_machs == "" } {
+ set ld_defaults ""
+ }
+ }
+
+ set rvdummy_id -1
+ set hostcmds [slurp_rv $src]
+
+ if { $hostcmds != "" } {
+ # I guess we could ask to have rvdummy executed on a
+ # remote host, but it looks like too much trouble for
+ # a feature rarely used.
+ if [is_remote host] {
+ untested $src
+ continue
+ }
+
+ set src_components [file split $src]
+ set rvfile "[lindex $src_components \
+ [expr [llength $src_components] - 1]].r"
+
+ if [catch { set f [open $rvfile w] } x] {
+ error "$x"
+ } {
+ set contents [join $hostcmds "\n"]
+
+ # Make it possible to use files from the test
+ # source directory; expected with the @-command.
+ regsub -all "@srcdir@" $contents "$srcdir/$subdir" contents
+
+ verbose "rv: $contents" 2
+ puts $f $contents
+ close $f
+ }
+
+ spawn -noecho $rvdummy "$rvfile"
+ if { $spawn_id < 0 } {
+ error "Couldn't spawn $rvdummy"
+ continue
+ }
+ set rvdummy_id $spawn_id
+ }
+
+ # Unfortunately this seems like the only way to pass
+ # additional sim, ld etc. options to run_sim_test.
+ set global_sim_options "$saved_global_sim_options $sim_defaults"
+ set global_ld_options "$saved_global_ld_options $ld_defaults"
+ run_sim_test $src $mach
+ set global_sim_options $saved_global_sim_options
+ set global_ld_options $saved_global_ld_options
+
+ # Stop the rvdummy, if it's still running. We need to
+ # wait on it anyway to avoid it turning into a zombie.
+ if { $rvdummy_id != -1 } {
+ close -i $rvdummy_id
+ wait -i $rvdummy_id
+
+ # Gleaned from framework.exp, this seems an indicator
+ # to whether the test had expected outcome. If so, we
+ # want to remove the rv-file.
+ if { $exit_status == 0 } {
+ file delete $rvfile
+ }
+ }
+ }
+ }
+}
--- /dev/null
+/rv/reg 0xd0000000 64
+/rv/remote-reg 0xa8800
+/rv/intnum 4 2
+/cris/vec-for-int 4 0x33 8 0x34 0xaa 0xea
+/rv/mem 0x20000 0x400
+/rv/remote-mem 0xe000
+/rv/mbox 0xc000f000
+/rv > int int /cris
--- /dev/null
+ .include "../../asm/testutils.inc"
+
+# Define an exception vector table "vecname" with a single
+# vector number "n" as "entry", all others "other".
+# V32 only needs 1<<10 alignment, earlier versions need 1<<16.
+ .macro singlevec vecname vecno entry other=killme
+ .section .text.exvec
+ .p2align 16
+\vecname:
+ .if (\vecno)
+ .rept \vecno
+ .dword \other
+ .endr
+ .endif
+ .dword \entry
+ .if (\vecno)-255
+ .rept 256-(\vecno)-1
+ .dword \other
+ .endr
+ .endif
+ .previous
+ .endm
--- /dev/null
+#mach: crisv32
+#sim(crisv32): --hw-info
+#output: /\n
+#output: /rv\n
+#output: /rv/reg 0xd0000000 0x40\n
+#output: /rv/remote-reg 0xa8800\n
+#output: /rv/intnum 0x4 0x2\n
+#output: /rv/mem 0x20000 0x400\n
+#output: /rv/remote-mem 0xe000\n
+#output: /rv/mbox 0xc000f000\n
+#output: /rv > int int /cris\n
+#output: /cris\n
+#output: /cris/vec-for-int 0x4 0x33 0x8 0x34 0xaa 0xea\n
+
+# Test expected --hw-info output and startup paths of components.
+
+ .include "quit.s"
--- /dev/null
+#mach: crisv32
+#sim(crisv32): --hw-device "/rv/dummy 0x12"
+
+# Test dummy settings: set from value.
+
+ .include "testutils.inc"
+ start
+ move.d 0xd0000000,$r0
+ move.d [$r0+],$r3
+ cmp.d 0x12121212,$r3
+ beq ok
+ nop
+bad:
+ fail
+ok:
+ moveq -1,$r3
+ move.d $r3,[$r0]
+ cmp.d [$r0],$r3
+ bne bad
+ nop
+ pass
--- /dev/null
+#mach: crisv32
+#sim(crisv32): --hw-device "/rv/dummy /dev/zero"
+
+# Test dummy settings: set from file.
+
+ .include "testutils.inc"
+ start
+ move.d 0xd0000000,$r0
+ move.d [$r0+],$r3
+ beq ok
+ nop
+bad:
+ fail
+ok:
+ moveq -1,$r3
+ move.d $r3,[$r0]
+ cmp.d [$r0],$r3
+ bne bad
+ nop
+ pass
--- /dev/null
+#mach: crisv32
+#r @,@srcdir@/trivial4.r
+
+# Test read and writes.
+
+ .include "testutils.inc"
+ start
+ move.d 0xd0000032,$r0
+ move.d [$r0+],$r3
+ cmp.d 0xabcdef01,$r3
+ beq ok
+ nop
+bad:
+ fail
+ok:
+ move.d 0xaabbccdd,$r3
+ move.d $r3,[$r0]
+ move.d [$r0],$r3
+ cmp.d 0x76543210,$r3
+ bne bad
+ nop
+ pass
--- /dev/null
+W,
+r,a8832,abcdef01
+w,a8836,aabbccdd
+r,a8836,76543210
--- /dev/null
+#mach: crisv10 crisv32
+#sim(crisv10): --hw-device "/rv/trace? true"
+#sim(crisv32): --hw-device "/rv/trace? true"
+#output: /rv: WD\n
+#output: /rv: REG R 0xd0000032\n
+#output: /rv: := 0xabcdef01\n
+#output: /rv: REG W 0xd0000036 := 0xaabbccdd\n
+#output: /rv: REG R 0xd0000036\n
+#output: /rv: := 0x76543210\n
+#output: pass\n
+
+# Test trace output for read and write.
+
+#r @,@srcdir@/trivial4.r
+
+ .include "trivial4.ms"
--- /dev/null
+#mach: crisv10 crisv32
+#sim(crisv10): --hw-device "/rv/trace? true" --hw-device "/rv/watchdog-interval 1"
+#sim(crisv32): --hw-device "/rv/trace? true" --hw-device "/rv/watchdog-interval 1" --hw-device "/rv/max-poll-ticks 1000"
+#output: /rv: WD\n
+#output: /rv: REG R 0xd0000036\n
+#output: /rv: := 0x76543210\n
+#output: /rv: WD\n
+#output: /rv: DMA W 0x20000..0x20003\n
+#output: /rv: 0x20000: 01 02 03 04\n
+#output: /rv: REG R 0xd0000038\n
+#output: /rv: := 0x76543211\n
+#output: pass\n
+
+#r W,
+#r r,a8836,76543210
+#r W,
+#r s,e000,01020304
+#r r,a8838,76543211
+
+ .include "testutils.inc"
+ start
+ mvi_h_mem 0 0x20000
+ test_h_mem 0x76543210 0xd0000036
+
+ move.d 0x20000,$r1
+0:
+ test.b [$r1]
+ beq 0b
+ nop
+ test_h_mem 0x76543211 0xd0000038
+ pass
+
+ .fill 65536*2+128,1,0
projects / binutils-gdb.git / commitdiff