--- /dev/null
+CONFIG_SYSVIPC=y
+CONFIG_POSIX_MQUEUE=y
+CONFIG_FHANDLE=y
+CONFIG_NO_HZ_IDLE=y
+CONFIG_HIGH_RES_TIMERS=y
+CONFIG_TASKSTATS=y
+CONFIG_SCHED_AUTOGROUP=y
+CONFIG_PROFILING=y
+CONFIG_MODULES=y
+CONFIG_MODULE_UNLOAD=y
+CONFIG_BLK_DEV_BSGLIB=y
+CONFIG_ARCH_VEXPRESS=y
+CONFIG_SMP=y
+CONFIG_TRANSPARENT_HUGEPAGE=y
+CONFIG_BINFMT_MISC=y
+CONFIG_COMPAT=y
+CONFIG_NET=y
+CONFIG_PACKET=y
+CONFIG_PACKET_DIAG=y
+CONFIG_UNIX=y
+CONFIG_NET_KEY=y
+CONFIG_INET=y
+CONFIG_IP_MULTICAST=y
+CONFIG_IP_ADVANCED_ROUTER=y
+CONFIG_BRIDGE=m
+CONFIG_NET_SCHED=y
+CONFIG_VSOCKETS=y
+CONFIG_DEVTMPFS=y
+CONFIG_DEVTMPFS_MOUNT=y
+CONFIG_VIRTIO_BLK=y
+CONFIG_BLK_DEV_SD=y
+CONFIG_CHR_DEV_SG=y
+CONFIG_SCSI_CONSTANTS=y
+CONFIG_SCSI_LOGGING=y
+CONFIG_SCSI_SCAN_ASYNC=y
+CONFIG_SCSI_VIRTIO=y
+CONFIG_ATA=y
+CONFIG_NETDEVICES=y
+CONFIG_DUMMY=y
+CONFIG_MACVLAN=y
+CONFIG_VIRTIO_NET=y
+CONFIG_NLMON=y
+CONFIG_VT_HW_CONSOLE_BINDING=y
+CONFIG_SERIAL_AMBA_PL011=y
+CONFIG_SERIAL_AMBA_PL011_CONSOLE=y
+CONFIG_VIRTIO_CONSOLE=y
+CONFIG_HW_RANDOM=y
+CONFIG_HW_RANDOM_VIRTIO=y
+CONFIG_RTC_CLASS=y
+CONFIG_VIRTIO_MMIO=y
+CONFIG_VIRTIO_MMIO_CMDLINE_DEVICES=y
+CONFIG_MAILBOX=y
+CONFIG_PL320_MBOX=y
+CONFIG_EXT4_FS=y
+CONFIG_TMPFS=y
+CONFIG_TMPFS_POSIX_ACL=y
+++ /dev/null
-CONFIG_SYSVIPC=y
-CONFIG_POSIX_MQUEUE=y
-CONFIG_FHANDLE=y
-CONFIG_NO_HZ_IDLE=y
-CONFIG_HIGH_RES_TIMERS=y
-CONFIG_TASKSTATS=y
-CONFIG_SCHED_AUTOGROUP=y
-CONFIG_PROFILING=y
-CONFIG_MODULES=y
-CONFIG_MODULE_UNLOAD=y
-CONFIG_BLK_DEV_BSGLIB=y
-CONFIG_ARCH_VEXPRESS=y
-CONFIG_SMP=y
-CONFIG_TRANSPARENT_HUGEPAGE=y
-CONFIG_BINFMT_MISC=y
-CONFIG_COMPAT=y
-CONFIG_NET=y
-CONFIG_PACKET=y
-CONFIG_PACKET_DIAG=y
-CONFIG_UNIX=y
-CONFIG_NET_KEY=y
-CONFIG_INET=y
-CONFIG_IP_MULTICAST=y
-CONFIG_IP_ADVANCED_ROUTER=y
-CONFIG_BRIDGE=m
-CONFIG_NET_SCHED=y
-CONFIG_VSOCKETS=y
-CONFIG_DEVTMPFS=y
-CONFIG_DEVTMPFS_MOUNT=y
-CONFIG_VIRTIO_BLK=y
-CONFIG_BLK_DEV_SD=y
-CONFIG_CHR_DEV_SG=y
-CONFIG_SCSI_CONSTANTS=y
-CONFIG_SCSI_LOGGING=y
-CONFIG_SCSI_SCAN_ASYNC=y
-CONFIG_SCSI_VIRTIO=y
-CONFIG_ATA=y
-CONFIG_NETDEVICES=y
-CONFIG_DUMMY=y
-CONFIG_MACVLAN=y
-CONFIG_VIRTIO_NET=y
-CONFIG_NLMON=y
-CONFIG_VT_HW_CONSOLE_BINDING=y
-CONFIG_SERIAL_AMBA_PL011=y
-CONFIG_SERIAL_AMBA_PL011_CONSOLE=y
-CONFIG_VIRTIO_CONSOLE=y
-CONFIG_HW_RANDOM=y
-CONFIG_HW_RANDOM_VIRTIO=y
-CONFIG_RTC_CLASS=y
-CONFIG_VIRTIO_MMIO=y
-CONFIG_VIRTIO_MMIO_CMDLINE_DEVICES=y
-CONFIG_MAILBOX=y
-CONFIG_PL320_MBOX=y
-CONFIG_EXT4_FS=y
-CONFIG_TMPFS=y
-CONFIG_TMPFS_POSIX_ACL=y
The login prompt will appear in the terminal that started Qemu.
-Tested with QEMU 2.6.0
+Tested with QEMU 2.9.0
--- /dev/null
+CONFIG_SYSVIPC=y
+CONFIG_MODULES=y
+CONFIG_MODULE_UNLOAD=y
+# CONFIG_ARCH_MULTI_V7 is not set
+CONFIG_ARCH_VERSATILE=y
+CONFIG_PCI=y
+CONFIG_PCI_VERSATILE=y
+CONFIG_AEABI=y
+CONFIG_NET=y
+CONFIG_PACKET=y
+CONFIG_UNIX=y
+CONFIG_INET=y
+CONFIG_SCSI=y
+CONFIG_BLK_DEV_SD=y
+CONFIG_SCSI_SYM53C8XX_2=y
+CONFIG_NETDEVICES=y
+CONFIG_8139CP=y
+CONFIG_PHYLIB=y
+CONFIG_INPUT_EVDEV=y
+CONFIG_SERIO_AMBAKMI=y
+CONFIG_LEGACY_PTY_COUNT=16
+CONFIG_SERIAL_8250=m
+CONFIG_SERIAL_8250_EXTENDED=y
+CONFIG_SERIAL_8250_MANY_PORTS=y
+CONFIG_SERIAL_8250_SHARE_IRQ=y
+CONFIG_SERIAL_8250_RSA=y
+CONFIG_SERIAL_AMBA_PL011=y
+CONFIG_SERIAL_AMBA_PL011_CONSOLE=y
+CONFIG_I2C=y
+CONFIG_I2C_CHARDEV=m
+CONFIG_FB=y
+CONFIG_FB_ARMCLCD=y
+CONFIG_FRAMEBUFFER_CONSOLE=y
+CONFIG_SOUND=y
+CONFIG_SND=m
+CONFIG_SND_MIXER_OSS=m
+CONFIG_SND_PCM_OSS=m
+CONFIG_SND_ARMAACI=m
+CONFIG_EXT4_FS=y
+CONFIG_VFAT_FS=m
+CONFIG_TMPFS=y
+CONFIG_TMPFS_POSIX_ACL=y
+CONFIG_MAGIC_SYSRQ=y
+++ /dev/null
-CONFIG_SYSVIPC=y
-CONFIG_MODULES=y
-CONFIG_MODULE_UNLOAD=y
-# CONFIG_ARCH_MULTI_V7 is not set
-CONFIG_ARCH_VERSATILE=y
-CONFIG_PCI=y
-CONFIG_PCI_VERSATILE=y
-CONFIG_AEABI=y
-CONFIG_NET=y
-CONFIG_PACKET=y
-CONFIG_UNIX=y
-CONFIG_INET=y
-CONFIG_SCSI=y
-CONFIG_BLK_DEV_SD=y
-CONFIG_SCSI_SYM53C8XX_2=y
-CONFIG_NETDEVICES=y
-CONFIG_8139CP=y
-CONFIG_PHYLIB=y
-CONFIG_INPUT_EVDEV=y
-CONFIG_SERIO_AMBAKMI=y
-CONFIG_LEGACY_PTY_COUNT=16
-CONFIG_SERIAL_8250=m
-CONFIG_SERIAL_8250_EXTENDED=y
-CONFIG_SERIAL_8250_MANY_PORTS=y
-CONFIG_SERIAL_8250_SHARE_IRQ=y
-CONFIG_SERIAL_8250_RSA=y
-CONFIG_SERIAL_AMBA_PL011=y
-CONFIG_SERIAL_AMBA_PL011_CONSOLE=y
-CONFIG_I2C=y
-CONFIG_I2C_CHARDEV=m
-CONFIG_FB=y
-CONFIG_FB_ARMCLCD=y
-CONFIG_FRAMEBUFFER_CONSOLE=y
-CONFIG_SOUND=y
-CONFIG_SND=m
-CONFIG_SND_MIXER_OSS=m
-CONFIG_SND_PCM_OSS=m
-CONFIG_SND_ARMAACI=m
-CONFIG_EXT4_FS=y
-CONFIG_VFAT_FS=m
-CONFIG_TMPFS=y
-CONFIG_TMPFS_POSIX_ACL=y
-CONFIG_MAGIC_SYSRQ=y
The login prompt will appear in the terminal that started Qemu. The
graphical window is the framebuffer.
-Tested with QEMU 2.5.0
+Tested with QEMU 2.9.0
If you want to emulate more cores change "-smp 1" to "-smp 2" for
dual-core or even "smp -4" for a quad-core configuration.
-Tested with QEMU 2.5.0
+Tested with QEMU 2.9.0
--- /dev/null
+CONFIG_M68K=y
+CONFIG_COLDFIRE=y
+# CONFIG_MMU is not set
+CONFIG_M520x=y
+CONFIG_CLOCK_SET=y
+CONFIG_CLOCK_FREQ=66666666
+CONFIG_CLOCK_DIV=1
+CONFIG_M5208EVB=y
+CONFIG_FREESCALE=y
+CONFIG_RAMBASE=0x40000000
+CONFIG_RAMSIZE=0x0
+CONFIG_VECTORBASE=0x40000000
+CONFIG_KERNELBASE=0x40020000
+CONFIG_4KSTACKS=y
+CONFIG_RAMKERNEL=y
+CONFIG_BINFMT_FLAT=y
+CONFIG_SERIAL_MCF=y
+CONFIG_SERIAL_MCF_BAUDRATE=115200
+CONFIG_SERIAL_MCF_CONSOLE=y
+CONFIG_BOOTPARAM=y
+CONFIG_BOOTPARAM_STRING="console=ttyS0,115200"
+CONFIG_NET=y
+CONFIG_PACKET=y
+CONFIG_UNIX=y
+CONFIG_INET=y
+CONFIG_NETDEVICES=y
+CONFIG_NET_VENDOR_FREESCALE=y
+CONFIG_FEC=y
+++ /dev/null
-CONFIG_M68K=y
-CONFIG_COLDFIRE=y
-# CONFIG_MMU is not set
-CONFIG_M520x=y
-CONFIG_CLOCK_SET=y
-CONFIG_CLOCK_FREQ=66666666
-CONFIG_CLOCK_DIV=1
-CONFIG_M5208EVB=y
-CONFIG_FREESCALE=y
-CONFIG_RAMBASE=0x40000000
-CONFIG_RAMSIZE=0x0
-CONFIG_VECTORBASE=0x40000000
-CONFIG_KERNELBASE=0x40020000
-CONFIG_4KSTACKS=y
-CONFIG_RAMKERNEL=y
-CONFIG_BINFMT_FLAT=y
-CONFIG_SERIAL_MCF=y
-CONFIG_SERIAL_MCF_BAUDRATE=115200
-CONFIG_SERIAL_MCF_CONSOLE=y
-CONFIG_BOOTPARAM=y
-CONFIG_BOOTPARAM_STRING="console=ttyS0,115200"
-CONFIG_NET=y
-CONFIG_PACKET=y
-CONFIG_UNIX=y
-CONFIG_INET=y
-CONFIG_NETDEVICES=y
-CONFIG_NET_VENDOR_FREESCALE=y
-CONFIG_FEC=y
The login prompt will appear in the terminal that started Qemu.
-Tested with QEMU 2.5.0
+Tested with QEMU 2.9.0
--- /dev/null
+CONFIG_M68K=y
+CONFIG_M68040=y
+CONFIG_M68KFPU_EMU=y
+CONFIG_MAC=y
+CONFIG_MACINTOSH_DRIVERS=y
+CONFIG_ADB=y
+CONFIG_ADB_MACII=y
+CONFIG_TTY=y
+CONFIG_MODULES=y
+CONFIG_MODULE_UNLOAD=y
+CONFIG_NET=y
+CONFIG_PACKET=y
+CONFIG_UNIX=y
+CONFIG_INET=y
+CONFIG_NETDEVICES=y
+CONFIG_MACSONIC=y
+CONFIG_SCSI=y
+CONFIG_SCSI_DMA=y
+CONFIG_SCSI_LOWLEVEL=y
+CONFIG_SCSI_MAC_ESP=y
+CONFIG_BLK_DEV_SD=y
+CONFIG_SERIAL_PMACZILOG=y
+CONFIG_SERIAL_PMACZILOG_TTYS=y
+CONFIG_SERIAL_PMACZILOG_CONSOLE=y
+CONFIG_EXT4_FS=y
+CONFIG_TMPFS=y
+++ /dev/null
-CONFIG_M68K=y
-CONFIG_M68040=y
-CONFIG_M68KFPU_EMU=y
-CONFIG_MAC=y
-CONFIG_MACINTOSH_DRIVERS=y
-CONFIG_ADB=y
-CONFIG_ADB_MACII=y
-CONFIG_TTY=y
-CONFIG_MODULES=y
-CONFIG_MODULE_UNLOAD=y
-CONFIG_NET=y
-CONFIG_PACKET=y
-CONFIG_UNIX=y
-CONFIG_INET=y
-CONFIG_NETDEVICES=y
-CONFIG_MACSONIC=y
-CONFIG_SCSI=y
-CONFIG_SCSI_DMA=y
-CONFIG_SCSI_LOWLEVEL=y
-CONFIG_SCSI_MAC_ESP=y
-CONFIG_BLK_DEV_SD=y
-CONFIG_SERIAL_PMACZILOG=y
-CONFIG_SERIAL_PMACZILOG_TTYS=y
-CONFIG_SERIAL_PMACZILOG_CONSOLE=y
-CONFIG_EXT4_FS=y
-CONFIG_TMPFS=y
--- /dev/null
+CONFIG_SYSVIPC=y
+CONFIG_MODULES=y
+CONFIG_MODULE_UNLOAD=y
+CONFIG_OPT_LIB_ASM=y
+CONFIG_XILINX_MICROBLAZE0_FAMILY="spartan3adsp"
+CONFIG_XILINX_MICROBLAZE0_USE_MSR_INSTR=1
+CONFIG_XILINX_MICROBLAZE0_USE_PCMP_INSTR=1
+CONFIG_XILINX_MICROBLAZE0_USE_BARREL=1
+CONFIG_XILINX_MICROBLAZE0_USE_HW_MUL=1
+CONFIG_MMU=y
+CONFIG_NET=y
+CONFIG_PACKET=y
+CONFIG_UNIX=y
+CONFIG_INET=y
+CONFIG_NETDEVICES=y
+CONFIG_XILINX_EMACLITE=y
+CONFIG_SERIAL_UARTLITE=y
+CONFIG_SERIAL_UARTLITE_CONSOLE=y
+# CONFIG_VGA_CONSOLE is not set
+CONFIG_TMPFS=y
+++ /dev/null
-CONFIG_SYSVIPC=y
-CONFIG_MODULES=y
-CONFIG_MODULE_UNLOAD=y
-CONFIG_OPT_LIB_ASM=y
-CONFIG_XILINX_MICROBLAZE0_FAMILY="spartan3adsp"
-CONFIG_XILINX_MICROBLAZE0_USE_MSR_INSTR=1
-CONFIG_XILINX_MICROBLAZE0_USE_PCMP_INSTR=1
-CONFIG_XILINX_MICROBLAZE0_USE_BARREL=1
-CONFIG_XILINX_MICROBLAZE0_USE_HW_MUL=1
-CONFIG_MMU=y
-CONFIG_NET=y
-CONFIG_PACKET=y
-CONFIG_UNIX=y
-CONFIG_INET=y
-CONFIG_NETDEVICES=y
-CONFIG_XILINX_EMACLITE=y
-CONFIG_SERIAL_UARTLITE=y
-CONFIG_SERIAL_UARTLITE_CONSOLE=y
-# CONFIG_VGA_CONSOLE is not set
-CONFIG_TMPFS=y
The login prompt will appear in the terminal that started Qemu.
-Tested with QEMU 2.5.0
+Tested with QEMU 2.9.0
--- /dev/null
+CONFIG_SYSVIPC=y
+CONFIG_MODULES=y
+CONFIG_MODULE_UNLOAD=y
+CONFIG_XILINX_MICROBLAZE0_FAMILY="spartan3adsp"
+CONFIG_XILINX_MICROBLAZE0_USE_MSR_INSTR=1
+CONFIG_XILINX_MICROBLAZE0_USE_PCMP_INSTR=1
+CONFIG_XILINX_MICROBLAZE0_USE_BARREL=1
+CONFIG_XILINX_MICROBLAZE0_USE_HW_MUL=1
+CONFIG_MMU=y
+CONFIG_NET=y
+CONFIG_PACKET=y
+CONFIG_UNIX=y
+CONFIG_INET=y
+CONFIG_NETDEVICES=y
+CONFIG_XILINX_EMACLITE=y
+CONFIG_SERIAL_UARTLITE=y
+CONFIG_SERIAL_UARTLITE_CONSOLE=y
+# CONFIG_VGA_CONSOLE is not set
+CONFIG_TMPFS=y
+++ /dev/null
-CONFIG_SYSVIPC=y
-CONFIG_MODULES=y
-CONFIG_MODULE_UNLOAD=y
-CONFIG_XILINX_MICROBLAZE0_FAMILY="spartan3adsp"
-CONFIG_XILINX_MICROBLAZE0_USE_MSR_INSTR=1
-CONFIG_XILINX_MICROBLAZE0_USE_PCMP_INSTR=1
-CONFIG_XILINX_MICROBLAZE0_USE_BARREL=1
-CONFIG_XILINX_MICROBLAZE0_USE_HW_MUL=1
-CONFIG_MMU=y
-CONFIG_NET=y
-CONFIG_PACKET=y
-CONFIG_UNIX=y
-CONFIG_INET=y
-CONFIG_NETDEVICES=y
-CONFIG_XILINX_EMACLITE=y
-CONFIG_SERIAL_UARTLITE=y
-CONFIG_SERIAL_UARTLITE_CONSOLE=y
-# CONFIG_VGA_CONSOLE is not set
-CONFIG_TMPFS=y
The login prompt will appear in the terminal that started Qemu.
-Tested with QEMU 2.5.0
+Tested with QEMU 2.9.0
--- /dev/null
+CONFIG_MIPS_MALTA=y
+CONFIG_CPU_MIPS32_R2=y
+CONFIG_MIPS_MT_SMP=y
+CONFIG_NR_CPUS=2
+CONFIG_SYSVIPC=y
+CONFIG_HIGH_RES_TIMERS=y
+CONFIG_MODULES=y
+CONFIG_MODULE_UNLOAD=y
+CONFIG_PCI=y
+CONFIG_NET=y
+CONFIG_PACKET=y
+CONFIG_UNIX=y
+CONFIG_INET=y
+CONFIG_IDE=y
+CONFIG_BLK_DEV_IDECD=y
+CONFIG_IDE_GENERIC=y
+CONFIG_BLK_DEV_GENERIC=y
+CONFIG_BLK_DEV_PIIX=y
+CONFIG_NETDEVICES=y
+CONFIG_PCNET32=y
+CONFIG_INPUT_EVDEV=y
+CONFIG_SERIAL_8250=y
+CONFIG_SERIAL_8250_CONSOLE=y
+CONFIG_FB=y
+CONFIG_FB_CIRRUS=y
+CONFIG_USB=y
+CONFIG_USB_UHCI_HCD=y
+CONFIG_EXT4_FS=y
+CONFIG_TMPFS=y
+CONFIG_TMPFS_POSIX_ACL=y
+++ /dev/null
-CONFIG_MIPS_MALTA=y
-CONFIG_CPU_MIPS32_R2=y
-CONFIG_MIPS_MT_SMP=y
-CONFIG_NR_CPUS=2
-CONFIG_SYSVIPC=y
-CONFIG_HIGH_RES_TIMERS=y
-CONFIG_MODULES=y
-CONFIG_MODULE_UNLOAD=y
-CONFIG_PCI=y
-CONFIG_NET=y
-CONFIG_PACKET=y
-CONFIG_UNIX=y
-CONFIG_INET=y
-CONFIG_IDE=y
-CONFIG_BLK_DEV_IDECD=y
-CONFIG_IDE_GENERIC=y
-CONFIG_BLK_DEV_GENERIC=y
-CONFIG_BLK_DEV_PIIX=y
-CONFIG_NETDEVICES=y
-CONFIG_PCNET32=y
-CONFIG_INPUT_EVDEV=y
-CONFIG_SERIAL_8250=y
-CONFIG_SERIAL_8250_CONSOLE=y
-CONFIG_FB=y
-CONFIG_FB_CIRRUS=y
-CONFIG_USB=y
-CONFIG_USB_UHCI_HCD=y
-CONFIG_EXT4_FS=y
-CONFIG_TMPFS=y
-CONFIG_TMPFS_POSIX_ACL=y
graphical window is the framebuffer. No keyboard support has been
enabled.
-Tested with QEMU 2.5.0
+Tested with QEMU 2.9.0
--- /dev/null
+CONFIG_MIPS_MALTA=y
+CONFIG_CPU_LITTLE_ENDIAN=y
+CONFIG_CPU_MIPS32_R2=y
+CONFIG_MIPS_MT_SMP=y
+CONFIG_NR_CPUS=2
+CONFIG_SYSVIPC=y
+CONFIG_HIGH_RES_TIMERS=y
+CONFIG_MODULES=y
+CONFIG_MODULE_UNLOAD=y
+CONFIG_PCI=y
+CONFIG_NET=y
+CONFIG_PACKET=y
+CONFIG_UNIX=y
+CONFIG_INET=y
+CONFIG_IDE=y
+CONFIG_BLK_DEV_IDECD=y
+CONFIG_IDE_GENERIC=y
+CONFIG_BLK_DEV_GENERIC=y
+CONFIG_BLK_DEV_PIIX=y
+CONFIG_NETDEVICES=y
+CONFIG_PCNET32=y
+CONFIG_INPUT_EVDEV=y
+CONFIG_SERIAL_8250=y
+CONFIG_SERIAL_8250_CONSOLE=y
+CONFIG_FB=y
+CONFIG_FB_CIRRUS=y
+CONFIG_USB=y
+CONFIG_USB_UHCI_HCD=y
+CONFIG_EXT4_FS=y
+CONFIG_TMPFS=y
+CONFIG_TMPFS_POSIX_ACL=y
+++ /dev/null
-CONFIG_MIPS_MALTA=y
-CONFIG_CPU_LITTLE_ENDIAN=y
-CONFIG_CPU_MIPS32_R2=y
-CONFIG_MIPS_MT_SMP=y
-CONFIG_NR_CPUS=2
-CONFIG_SYSVIPC=y
-CONFIG_HIGH_RES_TIMERS=y
-CONFIG_MODULES=y
-CONFIG_MODULE_UNLOAD=y
-CONFIG_PCI=y
-CONFIG_NET=y
-CONFIG_PACKET=y
-CONFIG_UNIX=y
-CONFIG_INET=y
-CONFIG_IDE=y
-CONFIG_BLK_DEV_IDECD=y
-CONFIG_IDE_GENERIC=y
-CONFIG_BLK_DEV_GENERIC=y
-CONFIG_BLK_DEV_PIIX=y
-CONFIG_NETDEVICES=y
-CONFIG_PCNET32=y
-CONFIG_INPUT_EVDEV=y
-CONFIG_SERIAL_8250=y
-CONFIG_SERIAL_8250_CONSOLE=y
-CONFIG_FB=y
-CONFIG_FB_CIRRUS=y
-CONFIG_USB=y
-CONFIG_USB_UHCI_HCD=y
-CONFIG_EXT4_FS=y
-CONFIG_TMPFS=y
-CONFIG_TMPFS_POSIX_ACL=y
graphical window is the framebuffer. No keyboard support has been
enabled.
-Tested with QEMU 2.5.0
+Tested with QEMU 2.9.0
--- /dev/null
+CONFIG_MIPS_MALTA=y
+CONFIG_CPU_MIPS32_R6=y
+CONFIG_MIPS_MT_SMP=y
+CONFIG_NR_CPUS=2
+CONFIG_SYSVIPC=y
+CONFIG_HIGH_RES_TIMERS=y
+CONFIG_MODULES=y
+CONFIG_MODULE_UNLOAD=y
+CONFIG_PCI=y
+CONFIG_NET=y
+CONFIG_PACKET=y
+CONFIG_UNIX=y
+CONFIG_INET=y
+CONFIG_IDE=y
+CONFIG_BLK_DEV_IDECD=y
+CONFIG_IDE_GENERIC=y
+CONFIG_BLK_DEV_GENERIC=y
+CONFIG_BLK_DEV_PIIX=y
+CONFIG_NETDEVICES=y
+CONFIG_PCNET32=y
+CONFIG_INPUT_EVDEV=y
+CONFIG_SERIAL_8250=y
+CONFIG_SERIAL_8250_CONSOLE=y
+CONFIG_FB=y
+CONFIG_FB_CIRRUS=y
+CONFIG_USB=y
+CONFIG_USB_UHCI_HCD=y
+CONFIG_EXT4_FS=y
+CONFIG_TMPFS=y
+CONFIG_TMPFS_POSIX_ACL=y
+++ /dev/null
-CONFIG_MIPS_MALTA=y
-CONFIG_CPU_MIPS32_R6=y
-CONFIG_MIPS_MT_SMP=y
-CONFIG_NR_CPUS=2
-CONFIG_SYSVIPC=y
-CONFIG_HIGH_RES_TIMERS=y
-CONFIG_MODULES=y
-CONFIG_MODULE_UNLOAD=y
-CONFIG_PCI=y
-CONFIG_NET=y
-CONFIG_PACKET=y
-CONFIG_UNIX=y
-CONFIG_INET=y
-CONFIG_IDE=y
-CONFIG_BLK_DEV_IDECD=y
-CONFIG_IDE_GENERIC=y
-CONFIG_BLK_DEV_GENERIC=y
-CONFIG_BLK_DEV_PIIX=y
-CONFIG_NETDEVICES=y
-CONFIG_PCNET32=y
-CONFIG_INPUT_EVDEV=y
-CONFIG_SERIAL_8250=y
-CONFIG_SERIAL_8250_CONSOLE=y
-CONFIG_FB=y
-CONFIG_FB_CIRRUS=y
-CONFIG_USB=y
-CONFIG_USB_UHCI_HCD=y
-CONFIG_EXT4_FS=y
-CONFIG_TMPFS=y
-CONFIG_TMPFS_POSIX_ACL=y
The login prompt will appear in the terminal that started Qemu.
-Tested with QEMU 2.6.0
+Tested with QEMU 2.9.0
--- /dev/null
+CONFIG_MIPS_MALTA=y
+CONFIG_CPU_MIPS32_R6=y
+CONFIG_MIPS_MT_SMP=y
+CONFIG_NR_CPUS=2
+CONFIG_SYSVIPC=y
+CONFIG_HIGH_RES_TIMERS=y
+CONFIG_MODULES=y
+CONFIG_MODULE_UNLOAD=y
+CONFIG_PCI=y
+CONFIG_NET=y
+CONFIG_PACKET=y
+CONFIG_UNIX=y
+CONFIG_INET=y
+CONFIG_IDE=y
+CONFIG_BLK_DEV_IDECD=y
+CONFIG_IDE_GENERIC=y
+CONFIG_BLK_DEV_GENERIC=y
+CONFIG_BLK_DEV_PIIX=y
+CONFIG_NETDEVICES=y
+CONFIG_PCNET32=y
+CONFIG_INPUT_EVDEV=y
+CONFIG_SERIAL_8250=y
+CONFIG_SERIAL_8250_CONSOLE=y
+CONFIG_FB=y
+CONFIG_FB_CIRRUS=y
+CONFIG_USB=y
+CONFIG_USB_UHCI_HCD=y
+CONFIG_EXT4_FS=y
+CONFIG_TMPFS=y
+CONFIG_TMPFS_POSIX_ACL=y
+++ /dev/null
-CONFIG_MIPS_MALTA=y
-CONFIG_CPU_MIPS32_R6=y
-CONFIG_MIPS_MT_SMP=y
-CONFIG_NR_CPUS=2
-CONFIG_SYSVIPC=y
-CONFIG_HIGH_RES_TIMERS=y
-CONFIG_MODULES=y
-CONFIG_MODULE_UNLOAD=y
-CONFIG_PCI=y
-CONFIG_NET=y
-CONFIG_PACKET=y
-CONFIG_UNIX=y
-CONFIG_INET=y
-CONFIG_IDE=y
-CONFIG_BLK_DEV_IDECD=y
-CONFIG_IDE_GENERIC=y
-CONFIG_BLK_DEV_GENERIC=y
-CONFIG_BLK_DEV_PIIX=y
-CONFIG_NETDEVICES=y
-CONFIG_PCNET32=y
-CONFIG_INPUT_EVDEV=y
-CONFIG_SERIAL_8250=y
-CONFIG_SERIAL_8250_CONSOLE=y
-CONFIG_FB=y
-CONFIG_FB_CIRRUS=y
-CONFIG_USB=y
-CONFIG_USB_UHCI_HCD=y
-CONFIG_EXT4_FS=y
-CONFIG_TMPFS=y
-CONFIG_TMPFS_POSIX_ACL=y
The login prompt will appear in the terminal that started Qemu.
-Tested with QEMU 2.6.0
+Tested with QEMU 2.9.0
--- /dev/null
+CONFIG_MIPS_MALTA=y
+CONFIG_CPU_MIPS64_R1=y
+CONFIG_64BIT=y
+CONFIG_MIPS_MT_SMP=y
+CONFIG_NR_CPUS=2
+CONFIG_SYSVIPC=y
+CONFIG_HIGH_RES_TIMERS=y
+CONFIG_MODULES=y
+CONFIG_MODULE_UNLOAD=y
+CONFIG_PCI=y
+CONFIG_MIPS32_COMPAT=y
+CONFIG_MIPS32_O32=y
+CONFIG_MIPS32_N32=y
+CONFIG_NET=y
+CONFIG_PACKET=y
+CONFIG_UNIX=y
+CONFIG_INET=y
+CONFIG_IDE=y
+CONFIG_BLK_DEV_IDECD=y
+CONFIG_IDE_GENERIC=y
+CONFIG_BLK_DEV_GENERIC=y
+CONFIG_BLK_DEV_PIIX=y
+CONFIG_NETDEVICES=y
+CONFIG_PCNET32=y
+CONFIG_INPUT_EVDEV=y
+CONFIG_SERIAL_8250=y
+CONFIG_SERIAL_8250_CONSOLE=y
+CONFIG_FB=y
+CONFIG_FB_CIRRUS=y
+CONFIG_USB=y
+CONFIG_USB_UHCI_HCD=y
+CONFIG_EXT4_FS=y
+CONFIG_TMPFS=y
+CONFIG_TMPFS_POSIX_ACL=y
+++ /dev/null
-CONFIG_MIPS_MALTA=y
-CONFIG_CPU_MIPS64_R1=y
-CONFIG_64BIT=y
-CONFIG_MIPS_MT_SMP=y
-CONFIG_NR_CPUS=2
-CONFIG_SYSVIPC=y
-CONFIG_HIGH_RES_TIMERS=y
-CONFIG_MODULES=y
-CONFIG_MODULE_UNLOAD=y
-CONFIG_PCI=y
-CONFIG_MIPS32_COMPAT=y
-CONFIG_MIPS32_O32=y
-CONFIG_MIPS32_N32=y
-CONFIG_NET=y
-CONFIG_PACKET=y
-CONFIG_UNIX=y
-CONFIG_INET=y
-CONFIG_IDE=y
-CONFIG_BLK_DEV_IDECD=y
-CONFIG_IDE_GENERIC=y
-CONFIG_BLK_DEV_GENERIC=y
-CONFIG_BLK_DEV_PIIX=y
-CONFIG_NETDEVICES=y
-CONFIG_PCNET32=y
-CONFIG_INPUT_EVDEV=y
-CONFIG_SERIAL_8250=y
-CONFIG_SERIAL_8250_CONSOLE=y
-CONFIG_FB=y
-CONFIG_FB_CIRRUS=y
-CONFIG_USB=y
-CONFIG_USB_UHCI_HCD=y
-CONFIG_EXT4_FS=y
-CONFIG_TMPFS=y
-CONFIG_TMPFS_POSIX_ACL=y
The login prompt will appear in the terminal that started Qemu. The
graphical window is the framebuffer.
-Tested with QEMU 2.5.0
+Tested with QEMU 2.9.0
--- /dev/null
+CONFIG_MIPS_MALTA=y
+CONFIG_CPU_LITTLE_ENDIAN=y
+CONFIG_CPU_MIPS64_R1=y
+CONFIG_64BIT=y
+CONFIG_MIPS_MT_SMP=y
+CONFIG_NR_CPUS=2
+CONFIG_SYSVIPC=y
+CONFIG_HIGH_RES_TIMERS=y
+CONFIG_MODULES=y
+CONFIG_MODULE_UNLOAD=y
+CONFIG_PCI=y
+CONFIG_MIPS32_COMPAT=y
+CONFIG_MIPS32_O32=y
+CONFIG_MIPS32_N32=y
+CONFIG_NET=y
+CONFIG_PACKET=y
+CONFIG_UNIX=y
+CONFIG_INET=y
+CONFIG_IDE=y
+CONFIG_BLK_DEV_IDECD=y
+CONFIG_IDE_GENERIC=y
+CONFIG_BLK_DEV_GENERIC=y
+CONFIG_BLK_DEV_PIIX=y
+CONFIG_NETDEVICES=y
+CONFIG_PCNET32=y
+CONFIG_INPUT_EVDEV=y
+CONFIG_SERIAL_8250=y
+CONFIG_SERIAL_8250_CONSOLE=y
+CONFIG_FB=y
+CONFIG_FB_CIRRUS=y
+CONFIG_USB=y
+CONFIG_USB_UHCI_HCD=y
+CONFIG_EXT4_FS=y
+CONFIG_TMPFS=y
+CONFIG_TMPFS_POSIX_ACL=y
+++ /dev/null
-CONFIG_MIPS_MALTA=y
-CONFIG_CPU_LITTLE_ENDIAN=y
-CONFIG_CPU_MIPS64_R1=y
-CONFIG_64BIT=y
-CONFIG_MIPS_MT_SMP=y
-CONFIG_NR_CPUS=2
-CONFIG_SYSVIPC=y
-CONFIG_HIGH_RES_TIMERS=y
-CONFIG_MODULES=y
-CONFIG_MODULE_UNLOAD=y
-CONFIG_PCI=y
-CONFIG_MIPS32_COMPAT=y
-CONFIG_MIPS32_O32=y
-CONFIG_MIPS32_N32=y
-CONFIG_NET=y
-CONFIG_PACKET=y
-CONFIG_UNIX=y
-CONFIG_INET=y
-CONFIG_IDE=y
-CONFIG_BLK_DEV_IDECD=y
-CONFIG_IDE_GENERIC=y
-CONFIG_BLK_DEV_GENERIC=y
-CONFIG_BLK_DEV_PIIX=y
-CONFIG_NETDEVICES=y
-CONFIG_PCNET32=y
-CONFIG_INPUT_EVDEV=y
-CONFIG_SERIAL_8250=y
-CONFIG_SERIAL_8250_CONSOLE=y
-CONFIG_FB=y
-CONFIG_FB_CIRRUS=y
-CONFIG_USB=y
-CONFIG_USB_UHCI_HCD=y
-CONFIG_EXT4_FS=y
-CONFIG_TMPFS=y
-CONFIG_TMPFS_POSIX_ACL=y
--- /dev/null
+CONFIG_MIPS_MALTA=y
+CONFIG_CPU_MIPS64_R6=y
+CONFIG_64BIT=y
+CONFIG_MIPS_MT_SMP=y
+CONFIG_NR_CPUS=2
+CONFIG_SYSVIPC=y
+CONFIG_HIGH_RES_TIMERS=y
+CONFIG_MODULES=y
+CONFIG_MODULE_UNLOAD=y
+CONFIG_PCI=y
+CONFIG_MIPS32_COMPAT=y
+CONFIG_MIPS32_O32=y
+CONFIG_MIPS32_N32=y
+CONFIG_NET=y
+CONFIG_PACKET=y
+CONFIG_UNIX=y
+CONFIG_INET=y
+CONFIG_IDE=y
+CONFIG_BLK_DEV_IDECD=y
+CONFIG_IDE_GENERIC=y
+CONFIG_BLK_DEV_GENERIC=y
+CONFIG_BLK_DEV_PIIX=y
+CONFIG_NETDEVICES=y
+CONFIG_PCNET32=y
+CONFIG_INPUT_EVDEV=y
+CONFIG_SERIAL_8250=y
+CONFIG_SERIAL_8250_CONSOLE=y
+CONFIG_FB=y
+CONFIG_FB_CIRRUS=y
+CONFIG_USB=y
+CONFIG_USB_UHCI_HCD=y
+CONFIG_EXT4_FS=y
+CONFIG_TMPFS=y
+CONFIG_TMPFS_POSIX_ACL=y
+++ /dev/null
-CONFIG_MIPS_MALTA=y
-CONFIG_CPU_MIPS64_R6=y
-CONFIG_64BIT=y
-CONFIG_MIPS_MT_SMP=y
-CONFIG_NR_CPUS=2
-CONFIG_SYSVIPC=y
-CONFIG_HIGH_RES_TIMERS=y
-CONFIG_MODULES=y
-CONFIG_MODULE_UNLOAD=y
-CONFIG_PCI=y
-CONFIG_MIPS32_COMPAT=y
-CONFIG_MIPS32_O32=y
-CONFIG_MIPS32_N32=y
-CONFIG_NET=y
-CONFIG_PACKET=y
-CONFIG_UNIX=y
-CONFIG_INET=y
-CONFIG_IDE=y
-CONFIG_BLK_DEV_IDECD=y
-CONFIG_IDE_GENERIC=y
-CONFIG_BLK_DEV_GENERIC=y
-CONFIG_BLK_DEV_PIIX=y
-CONFIG_NETDEVICES=y
-CONFIG_PCNET32=y
-CONFIG_INPUT_EVDEV=y
-CONFIG_SERIAL_8250=y
-CONFIG_SERIAL_8250_CONSOLE=y
-CONFIG_FB=y
-CONFIG_FB_CIRRUS=y
-CONFIG_USB=y
-CONFIG_USB_UHCI_HCD=y
-CONFIG_EXT4_FS=y
-CONFIG_TMPFS=y
-CONFIG_TMPFS_POSIX_ACL=y
--- /dev/null
+CONFIG_MIPS_MALTA=y
+CONFIG_CPU_MIPS64_R6=y
+CONFIG_64BIT=y
+CONFIG_MIPS_MT_SMP=y
+CONFIG_NR_CPUS=2
+CONFIG_SYSVIPC=y
+CONFIG_HIGH_RES_TIMERS=y
+CONFIG_MODULES=y
+CONFIG_MODULE_UNLOAD=y
+CONFIG_PCI=y
+CONFIG_MIPS32_COMPAT=y
+CONFIG_MIPS32_O32=y
+CONFIG_MIPS32_N32=y
+CONFIG_NET=y
+CONFIG_PACKET=y
+CONFIG_UNIX=y
+CONFIG_INET=y
+CONFIG_IDE=y
+CONFIG_BLK_DEV_IDECD=y
+CONFIG_IDE_GENERIC=y
+CONFIG_BLK_DEV_GENERIC=y
+CONFIG_BLK_DEV_PIIX=y
+CONFIG_NETDEVICES=y
+CONFIG_PCNET32=y
+CONFIG_INPUT_EVDEV=y
+CONFIG_SERIAL_8250=y
+CONFIG_SERIAL_8250_CONSOLE=y
+CONFIG_FB=y
+CONFIG_FB_CIRRUS=y
+CONFIG_USB=y
+CONFIG_USB_UHCI_HCD=y
+CONFIG_EXT4_FS=y
+CONFIG_TMPFS=y
+CONFIG_TMPFS_POSIX_ACL=y
+++ /dev/null
-CONFIG_MIPS_MALTA=y
-CONFIG_CPU_MIPS64_R6=y
-CONFIG_64BIT=y
-CONFIG_MIPS_MT_SMP=y
-CONFIG_NR_CPUS=2
-CONFIG_SYSVIPC=y
-CONFIG_HIGH_RES_TIMERS=y
-CONFIG_MODULES=y
-CONFIG_MODULE_UNLOAD=y
-CONFIG_PCI=y
-CONFIG_MIPS32_COMPAT=y
-CONFIG_MIPS32_O32=y
-CONFIG_MIPS32_N32=y
-CONFIG_NET=y
-CONFIG_PACKET=y
-CONFIG_UNIX=y
-CONFIG_INET=y
-CONFIG_IDE=y
-CONFIG_BLK_DEV_IDECD=y
-CONFIG_IDE_GENERIC=y
-CONFIG_BLK_DEV_GENERIC=y
-CONFIG_BLK_DEV_PIIX=y
-CONFIG_NETDEVICES=y
-CONFIG_PCNET32=y
-CONFIG_INPUT_EVDEV=y
-CONFIG_SERIAL_8250=y
-CONFIG_SERIAL_8250_CONSOLE=y
-CONFIG_FB=y
-CONFIG_FB_CIRRUS=y
-CONFIG_USB=y
-CONFIG_USB_UHCI_HCD=y
-CONFIG_EXT4_FS=y
-CONFIG_TMPFS=y
-CONFIG_TMPFS_POSIX_ACL=y
The login prompt will appear in the terminal that started Qemu.
-Tested with QEMU 2.6.0
-
-Might work with 2.6.0 by changing the -cpu entry to MIPS64R6-generic
-since the naming was updated and the old name removed in 2.7.0
+Tested with QEMU 2.9.0
--- /dev/null
+# Embed the DTB in the kernel image
+CONFIG_NIOS2_DTB_SOURCE_BOOL=y
+CONFIG_NIOS2_DTB_SOURCE="arch/nios2/boot/dts/10m50_devboard.dts"
+++ /dev/null
-# Embed the DTB in the kernel image
-CONFIG_NIOS2_DTB_SOURCE_BOOL=y
-CONFIG_NIOS2_DTB_SOURCE="arch/nios2/boot/dts/10m50_devboard.dts"
The login prompt will appear in the terminal that started Qemu.
-Tested with the upcoming QEMU 2.9.0 [1]
-
-[1] http://git.qemu.org/?p=qemu.git;h=ae5045ae5b2bbd8ce1335d1b05f9ecacca83a6cf
+Tested with QEMU 2.9.0.
--- /dev/null
+CONFIG_BLK_DEV_INITRD=y
+CONFIG_INITRAMFS_SOURCE="${BR_BINARIES_DIR}/rootfs.cpio"
+CONFIG_OPENRISC_BUILTIN_DTB="or1ksim"
+# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
+CONFIG_NET=y
+CONFIG_PACKET=y
+CONFIG_UNIX=y
+CONFIG_INET=y
+CONFIG_IP_MULTICAST=y
+# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
+# CONFIG_INET_XFRM_MODE_TUNNEL is not set
+# CONFIG_INET_XFRM_MODE_BEET is not set
+# CONFIG_IPV6 is not set
+# CONFIG_WIRELESS is not set
+CONFIG_DEVTMPFS=y
+CONFIG_DEVTMPFS_MOUNT=y
+CONFIG_TMPFS=y
+CONFIG_NETDEVICES=y
+CONFIG_ETHOC=y
+# CONFIG_WLAN is not set
+# CONFIG_INPUT_MOUSEDEV is not set
+# CONFIG_INPUT_KEYBOARD is not set
+# CONFIG_INPUT_MOUSE is not set
+# CONFIG_SERIO is not set
+CONFIG_SERIAL_8250=y
+CONFIG_SERIAL_8250_CONSOLE=y
+CONFIG_SERIAL_OF_PLATFORM=y
+# CONFIG_HWMON is not set
+# CONFIG_VGA_CONSOLE is not set
+# CONFIG_USB_SUPPORT is not set
+++ /dev/null
-CONFIG_BLK_DEV_INITRD=y
-CONFIG_INITRAMFS_SOURCE="${BR_BINARIES_DIR}/rootfs.cpio"
-CONFIG_OPENRISC_BUILTIN_DTB="or1ksim"
-# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
-CONFIG_NET=y
-CONFIG_PACKET=y
-CONFIG_UNIX=y
-CONFIG_INET=y
-CONFIG_IP_MULTICAST=y
-# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
-# CONFIG_INET_XFRM_MODE_TUNNEL is not set
-# CONFIG_INET_XFRM_MODE_BEET is not set
-# CONFIG_IPV6 is not set
-# CONFIG_WIRELESS is not set
-CONFIG_DEVTMPFS=y
-CONFIG_DEVTMPFS_MOUNT=y
-CONFIG_TMPFS=y
-CONFIG_NETDEVICES=y
-CONFIG_ETHOC=y
-# CONFIG_WLAN is not set
-# CONFIG_INPUT_MOUSEDEV is not set
-# CONFIG_INPUT_KEYBOARD is not set
-# CONFIG_INPUT_MOUSE is not set
-# CONFIG_SERIO is not set
-CONFIG_SERIAL_8250=y
-CONFIG_SERIAL_8250_CONSOLE=y
-CONFIG_SERIAL_OF_PLATFORM=y
-# CONFIG_HWMON is not set
-# CONFIG_VGA_CONSOLE is not set
-# CONFIG_USB_SUPPORT is not set
+++ /dev/null
-OpenRISC arch name was in the beginning or32
-
-Signed-off-by: Waldemar Brodkorb <wbx@openadk.org>
-
-diff -Nur linux-4.4.5.orig/arch/openrisc/kernel/vmlinux.lds.S linux-4.4.5/arch/openrisc/kernel/vmlinux.lds.S
---- linux-4.4.5.orig/arch/openrisc/kernel/vmlinux.lds.S 2016-03-10 00:35:58.000000000 +0100
-+++ linux-4.4.5/arch/openrisc/kernel/vmlinux.lds.S 2016-03-16 09:21:07.933535532 +0100
-@@ -30,7 +30,7 @@
- #include <asm/cache.h>
- #include <asm-generic/vmlinux.lds.h>
-
--OUTPUT_FORMAT("elf32-or32", "elf32-or32", "elf32-or32")
-+OUTPUT_FORMAT("elf32-or1k", "elf32-or1k", "elf32-or1k")
- jiffies = jiffies_64 + 4;
-
- SECTIONS
+++ /dev/null
-From: https://lkml.org/lkml/2016/12/31/13
-
-The build robot reports:
-
- .tmp_kallsyms1.o: In function `kallsyms_relative_base':
->> (.rodata+0x8a18): undefined reference to `_text'
-
-This is when using 'make alldefconfig'. Adding this _text symbol to mark
-the start of the kernel as in other architecture fixes this.
-
-Signed-off-by: Stafford Horne <shorne@gmail.com>
-Signed-off-by: Waldemar Brodkorb <wbx@openadk.org>
-
-diff -Nur linux-4.9.orig/arch/openrisc/kernel/vmlinux.lds.S linux-4.9/arch/openrisc/kernel/vmlinux.lds.S
---- linux-4.9.orig/arch/openrisc/kernel/vmlinux.lds.S 2016-12-11 20:17:54.000000000 +0100
-+++ linux-4.9/arch/openrisc/kernel/vmlinux.lds.S 2017-01-01 12:13:43.039107518 +0100
-@@ -38,6 +38,8 @@
- /* Read-only sections, merged into text segment: */
- . = LOAD_BASE ;
-
-+ _text = .;
-+
- /* _s_kernel_ro must be page aligned */
- . = ALIGN(PAGE_SIZE);
- _s_kernel_ro = .;
Run the emulation with:
- qemu-system-or32 -kernel output/images/vmlinux -nographic
+ qemu-system-or1k -kernel output/images/vmlinux -nographic
The login prompt will appear in the terminal that started Qemu.
Ethernet support is not working, yet.
-Tested with QEMU 2.8.0.
+Tested with QEMU 2.9.0.
--- /dev/null
+CONFIG_ALTIVEC=y
+CONFIG_SYSVIPC=y
+CONFIG_HIGHMEM=y
+CONFIG_YENTA=y
+CONFIG_NET=y
+CONFIG_PACKET=y
+CONFIG_UNIX=y
+CONFIG_INET=y
+CONFIG_IDE=y
+CONFIG_BLK_DEV_IDECD=y
+CONFIG_BLK_DEV_CMD64X=y
+CONFIG_BLK_DEV_IDE_PMAC=y
+CONFIG_ADB=y
+CONFIG_ADB_CUDA=y
+CONFIG_ADB_PMU=y
+CONFIG_NETDEVICES=y
+CONFIG_PCNET32=y
+CONFIG_8139CP=y
+CONFIG_SERIAL_PMACZILOG=y
+CONFIG_SERIAL_PMACZILOG_TTYS=y
+CONFIG_SERIAL_PMACZILOG_CONSOLE=y
+CONFIG_EXT4_FS=y
+CONFIG_TMPFS=y
+CONFIG_TMPFS_POSIX_ACL=y
+CONFIG_BOOTX_TEXT=y
+++ /dev/null
-CONFIG_ALTIVEC=y
-CONFIG_SYSVIPC=y
-CONFIG_HIGHMEM=y
-CONFIG_YENTA=y
-CONFIG_NET=y
-CONFIG_PACKET=y
-CONFIG_UNIX=y
-CONFIG_INET=y
-CONFIG_IDE=y
-CONFIG_BLK_DEV_IDECD=y
-CONFIG_BLK_DEV_CMD64X=y
-CONFIG_BLK_DEV_IDE_PMAC=y
-CONFIG_ADB=y
-CONFIG_ADB_CUDA=y
-CONFIG_ADB_PMU=y
-CONFIG_NETDEVICES=y
-CONFIG_PCNET32=y
-CONFIG_8139CP=y
-CONFIG_SERIAL_PMACZILOG=y
-CONFIG_SERIAL_PMACZILOG_TTYS=y
-CONFIG_SERIAL_PMACZILOG_CONSOLE=y
-CONFIG_EXT4_FS=y
-CONFIG_TMPFS=y
-CONFIG_TMPFS_POSIX_ACL=y
-CONFIG_BOOTX_TEXT=y
The login prompt will appear in the terminal that started Qemu. The
graphical window is the framebuffer.
-Tested with QEMU 2.5.0
+Tested with QEMU 2.9.0
--- /dev/null
+CONFIG_PPC_85xx=y
+CONFIG_PHYS_64BIT=y
+CONFIG_SYSVIPC=y
+CONFIG_NO_HZ=y
+CONFIG_HIGH_RES_TIMERS=y
+CONFIG_IKCONFIG=y
+CONFIG_IKCONFIG_PROC=y
+CONFIG_BLK_DEV_INITRD=y
+CONFIG_INITRAMFS_SOURCE="${BR_BINARIES_DIR}/rootfs.cpio"
+CONFIG_MODULES=y
+CONFIG_MODULE_UNLOAD=y
+CONFIG_MPC8540_ADS=y
+CONFIG_MPC85xx_DS=y
+CONFIG_HIGHMEM=y
+CONFIG_MATH_EMULATION=y
+CONFIG_PCI=y
+CONFIG_PCIEPORTBUS=y
+CONFIG_PCI_MSI=y
+CONFIG_NET=y
+CONFIG_PACKET=y
+CONFIG_UNIX=y
+CONFIG_INET=y
+CONFIG_DEVTMPFS=y
+CONFIG_DEVTMPFS_MOUNT=y
+CONFIG_NETDEVICES=y
+CONFIG_E1000=y
+CONFIG_SERIAL_8250=y
+CONFIG_SERIAL_8250_CONSOLE=y
+CONFIG_SERIAL_8250_NR_UARTS=6
+CONFIG_SERIAL_8250_RUNTIME_UARTS=6
+CONFIG_SERIAL_8250_MANY_PORTS=y
+CONFIG_SERIAL_8250_DETECT_IRQ=y
+CONFIG_SERIAL_8250_RSA=y
+CONFIG_USB=y
+CONFIG_USB_EHCI_HCD=y
+CONFIG_USB_EHCI_FSL=y
+CONFIG_USB_OHCI_HCD=y
+CONFIG_TMPFS=y
+++ /dev/null
-CONFIG_PPC_85xx=y
-CONFIG_PHYS_64BIT=y
-CONFIG_SYSVIPC=y
-CONFIG_NO_HZ=y
-CONFIG_HIGH_RES_TIMERS=y
-CONFIG_IKCONFIG=y
-CONFIG_IKCONFIG_PROC=y
-CONFIG_BLK_DEV_INITRD=y
-CONFIG_INITRAMFS_SOURCE="${BR_BINARIES_DIR}/rootfs.cpio"
-CONFIG_MODULES=y
-CONFIG_MODULE_UNLOAD=y
-CONFIG_MPC8540_ADS=y
-CONFIG_MPC85xx_DS=y
-CONFIG_HIGHMEM=y
-CONFIG_MATH_EMULATION=y
-CONFIG_PCI=y
-CONFIG_PCIEPORTBUS=y
-CONFIG_PCI_MSI=y
-CONFIG_NET=y
-CONFIG_PACKET=y
-CONFIG_UNIX=y
-CONFIG_INET=y
-CONFIG_DEVTMPFS=y
-CONFIG_DEVTMPFS_MOUNT=y
-CONFIG_NETDEVICES=y
-CONFIG_E1000=y
-CONFIG_SERIAL_8250=y
-CONFIG_SERIAL_8250_CONSOLE=y
-CONFIG_SERIAL_8250_NR_UARTS=6
-CONFIG_SERIAL_8250_RUNTIME_UARTS=6
-CONFIG_SERIAL_8250_MANY_PORTS=y
-CONFIG_SERIAL_8250_DETECT_IRQ=y
-CONFIG_SERIAL_8250_RSA=y
-CONFIG_USB=y
-CONFIG_USB_EHCI_HCD=y
-CONFIG_USB_EHCI_FSL=y
-CONFIG_USB_OHCI_HCD=y
-CONFIG_TMPFS=y
The login prompt will appear in the terminal that started Qemu.
-Tested with QEMU 2.5.0
+Tested with QEMU 2.9.0
The login prompt will appear in the terminal that started Qemu.
-Tested with QEMU 2.5.0
+Tested with QEMU 2.9.0
--- /dev/null
+CONFIG_SYSVIPC=y
+CONFIG_MODULES=y
+CONFIG_CPU_SUBTYPE_SH7751R=y
+CONFIG_MEMORY_START=0x0c000000
+CONFIG_FLATMEM_MANUAL=y
+CONFIG_SH_RTS7751R2D=y
+CONFIG_RTS7751R2D_PLUS=y
+CONFIG_HEARTBEAT=y
+CONFIG_PCI=y
+CONFIG_NET=y
+CONFIG_PACKET=y
+CONFIG_UNIX=y
+CONFIG_INET=y
+CONFIG_BLK_DEV_SD=y
+CONFIG_ATA=y
+CONFIG_PATA_PLATFORM=y
+CONFIG_NETDEVICES=y
+CONFIG_8139CP=y
+CONFIG_SERIAL_8250=y
+CONFIG_SERIAL_SH_SCI=y
+CONFIG_SERIAL_SH_SCI_CONSOLE=y
+CONFIG_SPI=y
+CONFIG_SPI_SH_SCI=y
+CONFIG_MFD_SM501=y
+CONFIG_FB=y
+CONFIG_FB_SH_MOBILE_LCDC=y
+CONFIG_FB_SH_MOBILE_HDMI=y
+CONFIG_FB_SM501=y
+CONFIG_FRAMEBUFFER_CONSOLE=y
+CONFIG_LOGO=y
+CONFIG_SOUND=y
+CONFIG_SND_YMFPCI=y
+CONFIG_SOUND_PRIME=y
+CONFIG_RTC_CLASS=y
+CONFIG_RTC_DRV_R9701=y
+CONFIG_EXT4_FS=y
+CONFIG_TMPFS=y
+CONFIG_TMPFS_POSIX_ACL=y
+++ /dev/null
-CONFIG_SYSVIPC=y
-CONFIG_MODULES=y
-CONFIG_CPU_SUBTYPE_SH7751R=y
-CONFIG_MEMORY_START=0x0c000000
-CONFIG_FLATMEM_MANUAL=y
-CONFIG_SH_RTS7751R2D=y
-CONFIG_RTS7751R2D_PLUS=y
-CONFIG_HEARTBEAT=y
-CONFIG_PCI=y
-CONFIG_NET=y
-CONFIG_PACKET=y
-CONFIG_UNIX=y
-CONFIG_INET=y
-CONFIG_BLK_DEV_SD=y
-CONFIG_ATA=y
-CONFIG_PATA_PLATFORM=y
-CONFIG_NETDEVICES=y
-CONFIG_8139CP=y
-CONFIG_SERIAL_8250=y
-CONFIG_SERIAL_SH_SCI=y
-CONFIG_SERIAL_SH_SCI_CONSOLE=y
-CONFIG_SPI=y
-CONFIG_SPI_SH_SCI=y
-CONFIG_MFD_SM501=y
-CONFIG_FB=y
-CONFIG_FB_SH_MOBILE_LCDC=y
-CONFIG_FB_SH_MOBILE_HDMI=y
-CONFIG_FB_SM501=y
-CONFIG_FRAMEBUFFER_CONSOLE=y
-CONFIG_LOGO=y
-CONFIG_SOUND=y
-CONFIG_SND_YMFPCI=y
-CONFIG_SOUND_PRIME=y
-CONFIG_RTC_CLASS=y
-CONFIG_RTC_DRV_R9701=y
-CONFIG_EXT4_FS=y
-CONFIG_TMPFS=y
-CONFIG_TMPFS_POSIX_ACL=y
--- /dev/null
+CONFIG_SYSVIPC=y
+CONFIG_MODULES=y
+CONFIG_CPU_SUBTYPE_SH7751R=y
+CONFIG_MEMORY_START=0x0c000000
+CONFIG_FLATMEM_MANUAL=y
+CONFIG_CPU_BIG_ENDIAN=y
+CONFIG_SH_RTS7751R2D=y
+CONFIG_RTS7751R2D_PLUS=y
+CONFIG_HEARTBEAT=y
+CONFIG_PCI=y
+CONFIG_NET=y
+CONFIG_PACKET=y
+CONFIG_UNIX=y
+CONFIG_INET=y
+CONFIG_BLK_DEV_SD=y
+CONFIG_ATA=y
+CONFIG_PATA_PLATFORM=y
+CONFIG_NETDEVICES=y
+CONFIG_8139CP=y
+CONFIG_SERIAL_8250=y
+CONFIG_SERIAL_SH_SCI=y
+CONFIG_SERIAL_SH_SCI_CONSOLE=y
+CONFIG_SPI=y
+CONFIG_SPI_SH_SCI=y
+CONFIG_MFD_SM501=y
+CONFIG_FB=y
+CONFIG_FB_SH_MOBILE_LCDC=y
+CONFIG_FB_SH_MOBILE_HDMI=y
+CONFIG_FB_SM501=y
+CONFIG_FRAMEBUFFER_CONSOLE=y
+CONFIG_LOGO=y
+CONFIG_SND_YMFPCI=y
+CONFIG_SOUND_PRIME=y
+CONFIG_RTC_CLASS=y
+CONFIG_RTC_DRV_R9701=y
+CONFIG_EXT4_FS=y
+CONFIG_TMPFS=y
+CONFIG_TMPFS_POSIX_ACL=y
+++ /dev/null
-CONFIG_SYSVIPC=y
-CONFIG_MODULES=y
-CONFIG_CPU_SUBTYPE_SH7751R=y
-CONFIG_MEMORY_START=0x0c000000
-CONFIG_FLATMEM_MANUAL=y
-CONFIG_CPU_BIG_ENDIAN=y
-CONFIG_SH_RTS7751R2D=y
-CONFIG_RTS7751R2D_PLUS=y
-CONFIG_HEARTBEAT=y
-CONFIG_PCI=y
-CONFIG_NET=y
-CONFIG_PACKET=y
-CONFIG_UNIX=y
-CONFIG_INET=y
-CONFIG_BLK_DEV_SD=y
-CONFIG_ATA=y
-CONFIG_PATA_PLATFORM=y
-CONFIG_NETDEVICES=y
-CONFIG_8139CP=y
-CONFIG_SERIAL_8250=y
-CONFIG_SERIAL_SH_SCI=y
-CONFIG_SERIAL_SH_SCI_CONSOLE=y
-CONFIG_SPI=y
-CONFIG_SPI_SH_SCI=y
-CONFIG_MFD_SM501=y
-CONFIG_FB=y
-CONFIG_FB_SH_MOBILE_LCDC=y
-CONFIG_FB_SH_MOBILE_HDMI=y
-CONFIG_FB_SM501=y
-CONFIG_FRAMEBUFFER_CONSOLE=y
-CONFIG_LOGO=y
-CONFIG_SND_YMFPCI=y
-CONFIG_SOUND_PRIME=y
-CONFIG_RTC_CLASS=y
-CONFIG_RTC_DRV_R9701=y
-CONFIG_EXT4_FS=y
-CONFIG_TMPFS=y
-CONFIG_TMPFS_POSIX_ACL=y
--- /dev/null
+CONFIG_SYSVIPC=y
+CONFIG_POSIX_MQUEUE=y
+CONFIG_MODULES=y
+CONFIG_MODULE_UNLOAD=y
+CONFIG_PCI=y
+CONFIG_SUN_OPENPROMFS=m
+CONFIG_NET=y
+CONFIG_PACKET=y
+CONFIG_UNIX=y
+CONFIG_INET=y
+# CONFIG_WIRELESS is not set
+CONFIG_SCSI=y
+CONFIG_BLK_DEV_SD=y
+CONFIG_BLK_DEV_SR=y
+CONFIG_CHR_DEV_SG=y
+CONFIG_SCSI_SUNESP=y
+CONFIG_NETDEVICES=y
+CONFIG_SUNLANCE=y
+# CONFIG_WLAN is not set
+CONFIG_INPUT_EVDEV=y
+CONFIG_KEYBOARD_SUNKBD=y
+CONFIG_MOUSE_SERIAL=y
+CONFIG_SERIAL_SUNZILOG=y
+CONFIG_SERIAL_SUNZILOG_CONSOLE=y
+CONFIG_SERIAL_SUNSU=y
+CONFIG_SERIAL_SUNSU_CONSOLE=y
+CONFIG_SUN_OPENPROMIO=m
+CONFIG_EXT4_FS=y
+CONFIG_ISO9660_FS=y
+CONFIG_TMPFS=y
+CONFIG_TMPFS_POSIX_ACL=y
+++ /dev/null
-CONFIG_SYSVIPC=y
-CONFIG_POSIX_MQUEUE=y
-CONFIG_MODULES=y
-CONFIG_MODULE_UNLOAD=y
-CONFIG_PCI=y
-CONFIG_SUN_OPENPROMFS=m
-CONFIG_NET=y
-CONFIG_PACKET=y
-CONFIG_UNIX=y
-CONFIG_INET=y
-# CONFIG_WIRELESS is not set
-CONFIG_SCSI=y
-CONFIG_BLK_DEV_SD=y
-CONFIG_BLK_DEV_SR=y
-CONFIG_CHR_DEV_SG=y
-CONFIG_SCSI_SUNESP=y
-CONFIG_NETDEVICES=y
-CONFIG_SUNLANCE=y
-# CONFIG_WLAN is not set
-CONFIG_INPUT_EVDEV=y
-CONFIG_KEYBOARD_SUNKBD=y
-CONFIG_MOUSE_SERIAL=y
-CONFIG_SERIAL_SUNZILOG=y
-CONFIG_SERIAL_SUNZILOG_CONSOLE=y
-CONFIG_SERIAL_SUNSU=y
-CONFIG_SERIAL_SUNSU_CONSOLE=y
-CONFIG_SUN_OPENPROMIO=m
-CONFIG_EXT4_FS=y
-CONFIG_ISO9660_FS=y
-CONFIG_TMPFS=y
-CONFIG_TMPFS_POSIX_ACL=y
The login prompt will appear in the terminal that started Qemu.
-Tested with QEMU 2.5.0
+Tested with QEMU 2.9.0
--- /dev/null
+CONFIG_SYSVIPC=y
+CONFIG_POSIX_MQUEUE=y
+CONFIG_NO_HZ_IDLE=y
+CONFIG_EMBEDDED=y
+CONFIG_MODULES=y
+CONFIG_PCI=y
+CONFIG_SUN_OPENPROMFS=y
+CONFIG_NET=y
+CONFIG_PACKET=y
+CONFIG_UNIX=y
+CONFIG_INET=y
+CONFIG_DEVTMPFS=y
+CONFIG_DEVTMPFS_MOUNT=y
+CONFIG_BLK_DEV_SD=y
+CONFIG_ATA=y
+CONFIG_PATA_CMD64X=y
+CONFIG_NETDEVICES=y
+CONFIG_E1000=y
+CONFIG_SERIAL_SUNSU=y
+CONFIG_SERIAL_SUNSU_CONSOLE=y
+CONFIG_EXT4_FS=y
+CONFIG_TMPFS=y
+CONFIG_NLS=y
+CONFIG_NLS_DEFAULT="utf-8"
+CONFIG_MAGIC_SYSRQ=y
+++ /dev/null
-CONFIG_SYSVIPC=y
-CONFIG_POSIX_MQUEUE=y
-CONFIG_NO_HZ_IDLE=y
-CONFIG_EMBEDDED=y
-CONFIG_MODULES=y
-CONFIG_PCI=y
-CONFIG_SUN_OPENPROMFS=y
-CONFIG_NET=y
-CONFIG_PACKET=y
-CONFIG_UNIX=y
-CONFIG_INET=y
-CONFIG_DEVTMPFS=y
-CONFIG_DEVTMPFS_MOUNT=y
-CONFIG_BLK_DEV_SD=y
-CONFIG_ATA=y
-CONFIG_PATA_CMD64X=y
-CONFIG_NETDEVICES=y
-CONFIG_E1000=y
-CONFIG_SERIAL_SUNSU=y
-CONFIG_SERIAL_SUNSU_CONSOLE=y
-CONFIG_EXT4_FS=y
-CONFIG_TMPFS=y
-CONFIG_NLS=y
-CONFIG_NLS_DEFAULT="utf-8"
-CONFIG_MAGIC_SYSRQ=y
The login prompt will appear in the terminal that started Qemu.
-Tested with QEMU 2.5.0
+Tested with QEMU 2.9.0
--- /dev/null
+CONFIG_SYSVIPC=y
+CONFIG_MODULES=y
+CONFIG_MODULE_UNLOAD=y
+CONFIG_SMP=y
+CONFIG_HYPERVISOR_GUEST=y
+CONFIG_PARAVIRT=y
+CONFIG_NET=y
+CONFIG_PACKET=y
+CONFIG_UNIX=y
+CONFIG_INET=y
+CONFIG_VIRTIO_BLK=y
+CONFIG_BLK_DEV_SD=y
+CONFIG_SCSI_VIRTIO=y
+CONFIG_ATA=y
+CONFIG_ATA_PIIX=y
+CONFIG_NETDEVICES=y
+CONFIG_VIRTIO_NET=y
+CONFIG_NE2K_PCI=y
+CONFIG_8139CP=y
+CONFIG_INPUT_EVDEV=y
+CONFIG_SERIAL_8250=y
+CONFIG_SERIAL_8250_CONSOLE=y
+CONFIG_VIRTIO_CONSOLE=y
+CONFIG_HW_RANDOM_VIRTIO=m
+CONFIG_DRM=y
+CONFIG_DRM_BOCHS=y
+CONFIG_DRM_QXL=y
+CONFIG_DRM_VIRTIO_GPU=y
+CONFIG_SOUND=y
+CONFIG_SND=y
+CONFIG_SND_HDA_INTEL=y
+CONFIG_SND_HDA_GENERIC=y
+CONFIG_USB=y
+CONFIG_USB_XHCI_HCD=y
+CONFIG_USB_EHCI_HCD=y
+CONFIG_USB_UHCI_HCD=y
+CONFIG_USB_STORAGE=y
+CONFIG_VIRTIO_PCI=y
+CONFIG_VIRTIO_BALLOON=y
+CONFIG_VIRTIO_INPUT=y
+CONFIG_VIRTIO_MMIO=y
+CONFIG_VIRTIO_MMIO_CMDLINE_DEVICES=y
+CONFIG_EXT4_FS=y
+CONFIG_TMPFS=y
+CONFIG_TMPFS_POSIX_ACL=y
+++ /dev/null
-../x86_64/linux-4.9.config
\ No newline at end of file
The login prompt will appear in the graphical window.
-Tested with QEMU 2.5.0
+Tested with QEMU 2.9.0
--- /dev/null
+CONFIG_SYSVIPC=y
+CONFIG_MODULES=y
+CONFIG_MODULE_UNLOAD=y
+CONFIG_SMP=y
+CONFIG_HYPERVISOR_GUEST=y
+CONFIG_PARAVIRT=y
+CONFIG_NET=y
+CONFIG_PACKET=y
+CONFIG_UNIX=y
+CONFIG_INET=y
+CONFIG_VIRTIO_BLK=y
+CONFIG_BLK_DEV_SD=y
+CONFIG_SCSI_VIRTIO=y
+CONFIG_ATA=y
+CONFIG_ATA_PIIX=y
+CONFIG_NETDEVICES=y
+CONFIG_VIRTIO_NET=y
+CONFIG_NE2K_PCI=y
+CONFIG_8139CP=y
+CONFIG_INPUT_EVDEV=y
+CONFIG_SERIAL_8250=y
+CONFIG_SERIAL_8250_CONSOLE=y
+CONFIG_VIRTIO_CONSOLE=y
+CONFIG_HW_RANDOM_VIRTIO=m
+CONFIG_DRM=y
+CONFIG_DRM_BOCHS=y
+CONFIG_DRM_QXL=y
+CONFIG_DRM_VIRTIO_GPU=y
+CONFIG_SOUND=y
+CONFIG_SND=y
+CONFIG_SND_HDA_INTEL=y
+CONFIG_SND_HDA_GENERIC=y
+CONFIG_USB=y
+CONFIG_USB_XHCI_HCD=y
+CONFIG_USB_EHCI_HCD=y
+CONFIG_USB_UHCI_HCD=y
+CONFIG_USB_STORAGE=y
+CONFIG_VIRTIO_PCI=y
+CONFIG_VIRTIO_BALLOON=y
+CONFIG_VIRTIO_INPUT=y
+CONFIG_VIRTIO_MMIO=y
+CONFIG_VIRTIO_MMIO_CMDLINE_DEVICES=y
+CONFIG_EXT4_FS=y
+CONFIG_TMPFS=y
+CONFIG_TMPFS_POSIX_ACL=y
+++ /dev/null
-CONFIG_SYSVIPC=y
-CONFIG_MODULES=y
-CONFIG_MODULE_UNLOAD=y
-CONFIG_SMP=y
-CONFIG_HYPERVISOR_GUEST=y
-CONFIG_PARAVIRT=y
-CONFIG_NET=y
-CONFIG_PACKET=y
-CONFIG_UNIX=y
-CONFIG_INET=y
-CONFIG_VIRTIO_BLK=y
-CONFIG_BLK_DEV_SD=y
-CONFIG_SCSI_VIRTIO=y
-CONFIG_ATA=y
-CONFIG_ATA_PIIX=y
-CONFIG_NETDEVICES=y
-CONFIG_VIRTIO_NET=y
-CONFIG_NE2K_PCI=y
-CONFIG_8139CP=y
-CONFIG_INPUT_EVDEV=y
-CONFIG_SERIAL_8250=y
-CONFIG_SERIAL_8250_CONSOLE=y
-CONFIG_VIRTIO_CONSOLE=y
-CONFIG_HW_RANDOM_VIRTIO=m
-CONFIG_DRM=y
-CONFIG_DRM_BOCHS=y
-CONFIG_DRM_QXL=y
-CONFIG_DRM_VIRTIO_GPU=y
-CONFIG_SOUND=y
-CONFIG_SND=y
-CONFIG_SND_HDA_INTEL=y
-CONFIG_SND_HDA_GENERIC=y
-CONFIG_USB=y
-CONFIG_USB_XHCI_HCD=y
-CONFIG_USB_EHCI_HCD=y
-CONFIG_USB_UHCI_HCD=y
-CONFIG_USB_STORAGE=y
-CONFIG_VIRTIO_PCI=y
-CONFIG_VIRTIO_BALLOON=y
-CONFIG_VIRTIO_INPUT=y
-CONFIG_VIRTIO_MMIO=y
-CONFIG_VIRTIO_MMIO_CMDLINE_DEVICES=y
-CONFIG_EXT4_FS=y
-CONFIG_TMPFS=y
-CONFIG_TMPFS_POSIX_ACL=y
The login prompt will appear in the graphical window.
-Tested with QEMU 2.5.0
+Tested with QEMU 2.9.0
--- /dev/null
+CONFIG_NO_HZ_IDLE=y
+CONFIG_HIGH_RES_TIMERS=y
+CONFIG_BLK_DEV_INITRD=y
+CONFIG_XTENSA_VARIANT_CUSTOM=y
+CONFIG_XTENSA_VARIANT_CUSTOM_NAME="dc233c"
+# CONFIG_XTENSA_VARIANT_MMU is not set
+CONFIG_XTENSA_UNALIGNED_USER=y
+CONFIG_PREEMPT=y
+CONFIG_KERNEL_LOAD_ADDRESS=0x00003000
+# CONFIG_PCI is not set
+CONFIG_XTENSA_PLATFORM_XTFPGA=y
+CONFIG_CMDLINE_BOOL=y
+CONFIG_CMDLINE="earlycon=uart8250,mmio32,0xfd050020,115200n8 console=ttyS0,115200n8 memmap=0x04000000@0"
+CONFIG_DEFAULT_MEM_START=0x00000000
+CONFIG_BINFMT_FLAT=y
+CONFIG_NET=y
+CONFIG_PACKET=y
+CONFIG_UNIX=y
+CONFIG_INET=y
+# CONFIG_IPV6 is not set
+CONFIG_NETFILTER=y
+CONFIG_DNS_RESOLVER=y
+# CONFIG_WIRELESS is not set
+CONFIG_DEVTMPFS=y
+CONFIG_DEVTMPFS_MOUNT=y
+CONFIG_BLK_DEV_LOOP=y
+CONFIG_NETDEVICES=y
+CONFIG_MARVELL_PHY=y
+# CONFIG_WLAN is not set
+CONFIG_SERIAL_8250=y
+# CONFIG_SERIAL_8250_DEPRECATED_OPTIONS is not set
+CONFIG_SERIAL_8250_CONSOLE=y
+# CONFIG_HWMON is not set
+# CONFIG_VGA_CONSOLE is not set
+CONFIG_TMPFS=y
+CONFIG_FANOTIFY=y
+CONFIG_PRINTK_TIME=y
+# CONFIG_S32C1I_SELFTEST is not set
--- /dev/null
+# CONFIG_SWAP is not set
+# CONFIG_CROSS_MEMORY_ATTACH is not set
+CONFIG_BLK_DEV_INITRD=y
+CONFIG_XTENSA_VARIANT_DC233C=y
+CONFIG_INITIALIZE_XTENSA_MMU_INSIDE_VMLINUX=y
+CONFIG_XTENSA_PLATFORM_XTFPGA=y
+CONFIG_CMDLINE_BOOL=y
+CONFIG_CMDLINE="console=ttyS0,38400 memmap=0x04000000@0"
+# CONFIG_COMPACTION is not set
+# CONFIG_BOUNCE is not set
+# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
+CONFIG_NET=y
+CONFIG_PACKET=y
+CONFIG_UNIX=y
+CONFIG_INET=y
+# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
+# CONFIG_INET_XFRM_MODE_TUNNEL is not set
+# CONFIG_INET_XFRM_MODE_BEET is not set
+# CONFIG_INET_LRO is not set
+# CONFIG_INET_DIAG is not set
+# CONFIG_IPV6 is not set
+# CONFIG_WIRELESS is not set
+CONFIG_DEVTMPFS=y
+CONFIG_DEVTMPFS_MOUNT=y
+CONFIG_NETDEVICES=y
+# CONFIG_WLAN is not set
+CONFIG_SERIAL_8250=y
+# CONFIG_SERIAL_8250_DEPRECATED_OPTIONS is not set
+CONFIG_SERIAL_8250_CONSOLE=y
+# CONFIG_HW_RANDOM is not set
+# CONFIG_HWMON is not set
+# CONFIG_VGA_CONSOLE is not set
+CONFIG_TMPFS=y
+CONFIG_TMPFS_POSIX_ACL=y
+CONFIG_LD_NO_RELAX=y
+# CONFIG_S32C1I_SELFTEST is not set
+++ /dev/null
-CONFIG_NO_HZ_IDLE=y
-CONFIG_HIGH_RES_TIMERS=y
-CONFIG_BLK_DEV_INITRD=y
-CONFIG_XTENSA_VARIANT_CUSTOM=y
-CONFIG_XTENSA_VARIANT_CUSTOM_NAME="dc233c"
-# CONFIG_XTENSA_VARIANT_MMU is not set
-CONFIG_XTENSA_UNALIGNED_USER=y
-CONFIG_PREEMPT=y
-CONFIG_KERNEL_LOAD_ADDRESS=0x00003000
-# CONFIG_PCI is not set
-CONFIG_XTENSA_PLATFORM_XTFPGA=y
-CONFIG_CMDLINE_BOOL=y
-CONFIG_CMDLINE="earlycon=uart8250,mmio32,0xfd050020,115200n8 console=ttyS0,115200n8 memmap=0x04000000@0"
-CONFIG_DEFAULT_MEM_START=0x00000000
-CONFIG_BINFMT_FLAT=y
-CONFIG_NET=y
-CONFIG_PACKET=y
-CONFIG_UNIX=y
-CONFIG_INET=y
-# CONFIG_IPV6 is not set
-CONFIG_NETFILTER=y
-CONFIG_DNS_RESOLVER=y
-# CONFIG_WIRELESS is not set
-CONFIG_DEVTMPFS=y
-CONFIG_DEVTMPFS_MOUNT=y
-CONFIG_BLK_DEV_LOOP=y
-CONFIG_NETDEVICES=y
-CONFIG_MARVELL_PHY=y
-# CONFIG_WLAN is not set
-CONFIG_SERIAL_8250=y
-# CONFIG_SERIAL_8250_DEPRECATED_OPTIONS is not set
-CONFIG_SERIAL_8250_CONSOLE=y
-# CONFIG_HWMON is not set
-# CONFIG_VGA_CONSOLE is not set
-CONFIG_TMPFS=y
-CONFIG_FANOTIFY=y
-CONFIG_PRINTK_TIME=y
-# CONFIG_S32C1I_SELFTEST is not set
+++ /dev/null
-# CONFIG_SWAP is not set
-# CONFIG_CROSS_MEMORY_ATTACH is not set
-CONFIG_BLK_DEV_INITRD=y
-CONFIG_XTENSA_VARIANT_DC233C=y
-CONFIG_INITIALIZE_XTENSA_MMU_INSIDE_VMLINUX=y
-CONFIG_XTENSA_PLATFORM_XTFPGA=y
-CONFIG_CMDLINE_BOOL=y
-CONFIG_CMDLINE="console=ttyS0,38400 memmap=0x04000000@0"
-# CONFIG_COMPACTION is not set
-# CONFIG_BOUNCE is not set
-# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
-CONFIG_NET=y
-CONFIG_PACKET=y
-CONFIG_UNIX=y
-CONFIG_INET=y
-# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
-# CONFIG_INET_XFRM_MODE_TUNNEL is not set
-# CONFIG_INET_XFRM_MODE_BEET is not set
-# CONFIG_INET_LRO is not set
-# CONFIG_INET_DIAG is not set
-# CONFIG_IPV6 is not set
-# CONFIG_WIRELESS is not set
-CONFIG_DEVTMPFS=y
-CONFIG_DEVTMPFS_MOUNT=y
-CONFIG_NETDEVICES=y
-# CONFIG_WLAN is not set
-CONFIG_SERIAL_8250=y
-# CONFIG_SERIAL_8250_DEPRECATED_OPTIONS is not set
-CONFIG_SERIAL_8250_CONSOLE=y
-# CONFIG_HW_RANDOM is not set
-# CONFIG_HWMON is not set
-# CONFIG_VGA_CONSOLE is not set
-CONFIG_TMPFS=y
-CONFIG_TMPFS_POSIX_ACL=y
-CONFIG_LD_NO_RELAX=y
-# CONFIG_S32C1I_SELFTEST is not set
+++ /dev/null
-disable boot-uboot and boot-redboot, requires a patched u-boot and mkimage
-
-Signed-off-by:Waldemar Brodkorb <wbx@openadk.org>
-
-diff -Nur linux-3.15.orig/arch/xtensa/boot/Makefile linux-3.15/arch/xtensa/boot/Makefile
---- linux-3.15.orig/arch/xtensa/boot/Makefile 2014-06-08 20:19:54.000000000 +0200
-+++ linux-3.15/arch/xtensa/boot/Makefile 2014-06-14 20:07:15.206091165 +0200
-@@ -23,7 +23,7 @@
-
- bootdir-$(CONFIG_XTENSA_PLATFORM_ISS) += boot-elf
- bootdir-$(CONFIG_XTENSA_PLATFORM_XT2000) += boot-redboot boot-elf boot-uboot
--bootdir-$(CONFIG_XTENSA_PLATFORM_XTFPGA) += boot-redboot boot-elf boot-uboot
-+bootdir-$(CONFIG_XTENSA_PLATFORM_XTFPGA) += boot-elf
-
- zImage Image: $(bootdir-y)
-
The login prompt will appear in the terminal that started Qemu.
-Tested with QEMU 2.6.0
-Known to fail with 2.5.0
+Tested with QEMU 2.9.0
# BR2_TARGET_ROOTFS_TAR is not set
BR2_TARGET_ROOTFS_INITRAMFS=y
-# Linux headers same as kernel, a 4.9 series
-BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_4_9=y
+# Linux headers same as kernel, a 4.11 series
+BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_4_11=y
# Kernel
BR2_LINUX_KERNEL=y
BR2_LINUX_KERNEL_CUSTOM_VERSION=y
-BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="4.9.6"
+BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="4.11.3"
BR2_LINUX_KERNEL_USE_CUSTOM_CONFIG=y
-BR2_LINUX_KERNEL_CUSTOM_CONFIG_FILE="board/qemu/aarch64-virt/linux-4.9.config"
+BR2_LINUX_KERNEL_CUSTOM_CONFIG_FILE="board/qemu/aarch64-virt/linux-4.11.config"
BR2_TARGET_ROOTFS_EXT2=y
# BR2_TARGET_ROOTFS_TAR is not set
-# Linux headers same as kernel, a 4.9 series
-BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_4_9=y
+# Linux headers same as kernel, a 4.11 series
+BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_4_11=y
# Kernel
BR2_LINUX_KERNEL=y
BR2_LINUX_KERNEL_CUSTOM_VERSION=y
-BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="4.9.6"
+BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="4.11.3"
BR2_LINUX_KERNEL_USE_CUSTOM_CONFIG=y
-BR2_LINUX_KERNEL_CUSTOM_CONFIG_FILE="board/qemu/arm-versatile/linux-4.9.config"
+BR2_LINUX_KERNEL_CUSTOM_CONFIG_FILE="board/qemu/arm-versatile/linux-4.11.config"
BR2_LINUX_KERNEL_DTS_SUPPORT=y
BR2_LINUX_KERNEL_INTREE_DTS_NAME="versatile-pb"
# Kernel
BR2_LINUX_KERNEL=y
BR2_LINUX_KERNEL_CUSTOM_VERSION=y
-BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="4.4.45"
+BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="4.4.70"
BR2_LINUX_KERNEL_USE_CUSTOM_CONFIG=y
BR2_LINUX_KERNEL_CUSTOM_CONFIG_FILE="board/qemu/arm-versatile/linux-4.4-nommu.config"
BR2_TARGET_ROOTFS_EXT2=y
# BR2_TARGET_ROOTFS_TAR is not set
-# Linux headers same as kernel, a 4.9 series
-BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_4_9=y
+# Linux headers same as kernel, a 4.11 series
+BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_4_11=y
# Kernel
BR2_LINUX_KERNEL=y
BR2_LINUX_KERNEL_CUSTOM_VERSION=y
-BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="4.9.6"
+BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="4.11.3"
BR2_LINUX_KERNEL_DEFCONFIG="vexpress"
BR2_LINUX_KERNEL_DTS_SUPPORT=y
BR2_LINUX_KERNEL_INTREE_DTS_NAME="vexpress-v2p-ca9"
BR2_TARGET_ROOTFS_INITRAMFS=y
# BR2_TARGET_ROOTFS_TAR is not set
-# Linux headers same as kernel, a 4.8 series
-BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_4_8=y
+# Linux headers same as kernel, a 4.11 series
+BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_4_11=y
# Kernel
BR2_LINUX_KERNEL=y
BR2_LINUX_KERNEL_CUSTOM_VERSION=y
-BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="4.8.17"
+BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="4.11.3"
BR2_LINUX_KERNEL_USE_CUSTOM_CONFIG=y
-BR2_LINUX_KERNEL_CUSTOM_CONFIG_FILE="board/qemu/m68k-mcf5208/linux-4.8.config"
+BR2_LINUX_KERNEL_CUSTOM_CONFIG_FILE="board/qemu/m68k-mcf5208/linux-4.11.config"
BR2_LINUX_KERNEL_VMLINUX=y
# Serial port config
BR2_TARGET_ROOTFS_EXT2=y
# BR2_TARGET_ROOTFS_TAR is not set
-# Linux headers same as kernel, a 4.9 series
-BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_4_9=y
+# Linux headers same as kernel, a 4.11 series
+BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_4_11=y
# Kernel
BR2_LINUX_KERNEL=y
BR2_LINUX_KERNEL_CUSTOM_VERSION=y
-BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="4.9.6"
+BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="4.11.3"
BR2_LINUX_KERNEL_USE_CUSTOM_CONFIG=y
-BR2_LINUX_KERNEL_CUSTOM_CONFIG_FILE="board/qemu/m68k-q800/linux-4.9.config"
+BR2_LINUX_KERNEL_CUSTOM_CONFIG_FILE="board/qemu/m68k-q800/linux-4.11.config"
BR2_LINUX_KERNEL_VMLINUX=y
# Serial port config
# BR2_TARGET_ROOTFS_TAR is not set
BR2_TARGET_ROOTFS_INITRAMFS=y
-# Linux headers same as kernel, a 4.9 series
-BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_4_9=y
+# Linux headers same as kernel, a 4.11 series
+BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_4_11=y
# Kernel
BR2_LINUX_KERNEL=y
BR2_LINUX_KERNEL_CUSTOM_VERSION=y
-BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="4.9.6"
+BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="4.11.3"
BR2_LINUX_KERNEL_USE_CUSTOM_CONFIG=y
-BR2_LINUX_KERNEL_CUSTOM_CONFIG_FILE="board/qemu/microblazebe-mmu/linux-4.9.config"
+BR2_LINUX_KERNEL_CUSTOM_CONFIG_FILE="board/qemu/microblazebe-mmu/linux-4.11.config"
BR2_LINUX_KERNEL_LINUX_BIN=y
BR2_LINUX_KERNEL_PATCH="board/qemu/microblazebe-mmu/xilinx-xemaclite.patch"
# BR2_TARGET_ROOTFS_TAR is not set
BR2_TARGET_ROOTFS_INITRAMFS=y
-# Linux headers same as kernel, a 4.9 series
-BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_4_9=y
+# Linux headers same as kernel, a 4.11 series
+BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_4_11=y
# Kernel
BR2_LINUX_KERNEL=y
BR2_LINUX_KERNEL_CUSTOM_VERSION=y
-BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="4.9.6"
+BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="4.11.3"
BR2_LINUX_KERNEL_USE_CUSTOM_CONFIG=y
-BR2_LINUX_KERNEL_CUSTOM_CONFIG_FILE="board/qemu/microblazeel-mmu/linux-4.9.config"
+BR2_LINUX_KERNEL_CUSTOM_CONFIG_FILE="board/qemu/microblazeel-mmu/linux-4.11.config"
BR2_LINUX_KERNEL_LINUX_BIN=y
BR2_LINUX_KERNEL_PATCH="board/qemu/microblazeel-mmu/xilinx-xemaclite.patch"
BR2_TARGET_ROOTFS_EXT2=y
# BR2_TARGET_ROOTFS_TAR is not set
-# Linux headers same as kernel, a 4.9 series
-BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_4_9=y
+# Linux headers same as kernel, a 4.11 series
+BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_4_11=y
# Kernel
BR2_LINUX_KERNEL=y
BR2_LINUX_KERNEL_CUSTOM_VERSION=y
-BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="4.9.6"
+BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="4.11.3"
BR2_LINUX_KERNEL_USE_CUSTOM_CONFIG=y
-BR2_LINUX_KERNEL_CUSTOM_CONFIG_FILE="board/qemu/mips32r2-malta/linux-4.9.config"
+BR2_LINUX_KERNEL_CUSTOM_CONFIG_FILE="board/qemu/mips32r2-malta/linux-4.11.config"
BR2_LINUX_KERNEL_VMLINUX=y
# Serial port config
BR2_TARGET_ROOTFS_EXT2=y
# BR2_TARGET_ROOTFS_TAR is not set
-# Linux headers same as kernel, a 4.9 series
-BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_4_9=y
+# Linux headers same as kernel, a 4.11 series
+BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_4_11=y
# Kernel
BR2_LINUX_KERNEL=y
BR2_LINUX_KERNEL_CUSTOM_VERSION=y
-BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="4.9.6"
+BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="4.11.3"
BR2_LINUX_KERNEL_USE_CUSTOM_CONFIG=y
-BR2_LINUX_KERNEL_CUSTOM_CONFIG_FILE="board/qemu/mips32r2el-malta/linux-4.9.config"
+BR2_LINUX_KERNEL_CUSTOM_CONFIG_FILE="board/qemu/mips32r2el-malta/linux-4.11.config"
BR2_LINUX_KERNEL_VMLINUX=y
# Serial port config
BR2_TARGET_ROOTFS_EXT2=y
# BR2_TARGET_ROOTFS_TAR is not set
-# Linux headers same as kernel, a 4.9 series
-BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_4_9=y
+# Linux headers same as kernel, a 4.11 series
+BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_4_11=y
# Kernel
BR2_LINUX_KERNEL=y
BR2_LINUX_KERNEL_CUSTOM_VERSION=y
-BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="4.9.6"
+BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="4.11.3"
BR2_LINUX_KERNEL_USE_CUSTOM_CONFIG=y
-BR2_LINUX_KERNEL_CUSTOM_CONFIG_FILE="board/qemu/mips32r6-malta/linux-4.9.config"
+BR2_LINUX_KERNEL_CUSTOM_CONFIG_FILE="board/qemu/mips32r6-malta/linux-4.11.config"
BR2_LINUX_KERNEL_VMLINUX=y
# Compiler
BR2_TARGET_ROOTFS_EXT2=y
# BR2_TARGET_ROOTFS_TAR is not set
-# Linux headers same as kernel, a 4.9 series
-BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_4_9=y
+# Linux headers same as kernel, a 4.11 series
+BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_4_11=y
# Kernel
BR2_LINUX_KERNEL=y
BR2_LINUX_KERNEL_CUSTOM_VERSION=y
-BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="4.9.6"
+BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="4.11.3"
BR2_LINUX_KERNEL_USE_CUSTOM_CONFIG=y
-BR2_LINUX_KERNEL_CUSTOM_CONFIG_FILE="board/qemu/mips32r6el-malta/linux-4.9.config"
+BR2_LINUX_KERNEL_CUSTOM_CONFIG_FILE="board/qemu/mips32r6el-malta/linux-4.11.config"
BR2_LINUX_KERNEL_VMLINUX=y
# Compiler
BR2_TARGET_ROOTFS_EXT2=y
# BR2_TARGET_ROOTFS_TAR is not set
-# Linux headers same as kernel, a 4.8 series
-BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_4_8=y
+# Linux headers same as kernel, a 4.11 series
+BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_4_11=y
# Kernel
BR2_LINUX_KERNEL=y
BR2_LINUX_KERNEL_CUSTOM_VERSION=y
-BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="4.8.17"
+BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="4.11.3"
BR2_LINUX_KERNEL_USE_CUSTOM_CONFIG=y
-BR2_LINUX_KERNEL_CUSTOM_CONFIG_FILE="board/qemu/mips64-malta/linux-4.8.config"
+BR2_LINUX_KERNEL_CUSTOM_CONFIG_FILE="board/qemu/mips64-malta/linux-4.11.config"
BR2_LINUX_KERNEL_VMLINUX=y
# Serial port config
BR2_TARGET_ROOTFS_EXT2=y
# BR2_TARGET_ROOTFS_TAR is not set
-# Linux headers same as kernel, a 4.9 series
-BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_4_9=y
+# Linux headers same as kernel, a 4.11 series
+BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_4_11=y
# Kernel
BR2_LINUX_KERNEL=y
BR2_LINUX_KERNEL_CUSTOM_VERSION=y
-BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="4.9.6"
+BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="4.11.3"
BR2_LINUX_KERNEL_USE_CUSTOM_CONFIG=y
-BR2_LINUX_KERNEL_CUSTOM_CONFIG_FILE="board/qemu/mips64el-malta/linux-4.9.config"
+BR2_LINUX_KERNEL_CUSTOM_CONFIG_FILE="board/qemu/mips64el-malta/linux-4.11.config"
BR2_LINUX_KERNEL_VMLINUX=y
# Serial port config
BR2_TARGET_ROOTFS_EXT2=y
# BR2_TARGET_ROOTFS_TAR is not set
-# Linux headers same as kernel, a 4.9 series
-BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_4_9=y
+# Linux headers same as kernel, a 4.11 series
+BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_4_11=y
# Kernel
BR2_LINUX_KERNEL=y
BR2_LINUX_KERNEL_CUSTOM_VERSION=y
-BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="4.9.6"
+BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="4.11.3"
BR2_LINUX_KERNEL_USE_CUSTOM_CONFIG=y
-BR2_LINUX_KERNEL_CUSTOM_CONFIG_FILE="board/qemu/mips64r6-malta/linux-4.9.config"
+BR2_LINUX_KERNEL_CUSTOM_CONFIG_FILE="board/qemu/mips64r6-malta/linux-4.11.config"
BR2_LINUX_KERNEL_VMLINUX=y
# Compiler
BR2_TARGET_ROOTFS_EXT2=y
# BR2_TARGET_ROOTFS_TAR is not set
-# Linux headers same as kernel, a 4.9 series
-BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_4_9=y
+# Linux headers same as kernel, a 4.11 series
+BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_4_11=y
# Kernel
BR2_LINUX_KERNEL=y
BR2_LINUX_KERNEL_CUSTOM_VERSION=y
-BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="4.9.6"
+BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="4.11.3"
BR2_LINUX_KERNEL_USE_CUSTOM_CONFIG=y
-BR2_LINUX_KERNEL_CUSTOM_CONFIG_FILE="board/qemu/mips64r6el-malta/linux-4.9.config"
+BR2_LINUX_KERNEL_CUSTOM_CONFIG_FILE="board/qemu/mips64r6el-malta/linux-4.11.config"
BR2_LINUX_KERNEL_VMLINUX=y
# Compiler
BR2_nios2=y
BR2_LINUX_KERNEL=y
BR2_LINUX_KERNEL_CUSTOM_VERSION=y
-BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="4.9.6"
+BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="4.11.3"
BR2_LINUX_KERNEL_DEFCONFIG="10m50"
-BR2_LINUX_KERNEL_CONFIG_FRAGMENT_FILES="board/qemu/nios2-10m50/linux-4.9.fragment"
+BR2_LINUX_KERNEL_CONFIG_FRAGMENT_FILES="board/qemu/nios2-10m50/linux-4.11.fragment"
BR2_TARGET_ROOTFS_INITRAMFS=y
-# Linux headers same as kernel, a 4.9 series
-BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_4_9=y
+# Linux headers same as kernel, a 4.11 series
+BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_4_11=y
# Architecture
BR2_or1k=y
-# Patches
-BR2_GLOBAL_PATCH_DIR="board/qemu/or1k/patches"
-
# Filesystem
# BR2_TARGET_ROOTFS_TAR is not set
BR2_TARGET_ROOTFS_INITRAMFS=y
-# Linux headers same as kernel, a 4,9 series
-BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_4_9=y
+# Linux headers same as kernel, a 4,11 series
+BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_4_11=y
# Kernel
BR2_LINUX_KERNEL=y
BR2_LINUX_KERNEL_CUSTOM_VERSION=y
-BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="4.9.6"
+BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="4.11.3"
BR2_LINUX_KERNEL_USE_CUSTOM_CONFIG=y
-BR2_LINUX_KERNEL_CUSTOM_CONFIG_FILE="board/qemu/or1k/linux-4.9.config"
+BR2_LINUX_KERNEL_CUSTOM_CONFIG_FILE="board/qemu/or1k/linux-4.11.config"
BR2_TARGET_ROOTFS_EXT2=y
# BR2_TARGET_ROOTFS_TAR is not set
-# Linux headers same as kernel, a 4.9 series
-BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_4_9=y
+# Linux headers same as kernel, a 4.11 series
+BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_4_11=y
# Kernel
BR2_LINUX_KERNEL=y
BR2_LINUX_KERNEL_CUSTOM_VERSION=y
-BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="4.9.6"
+BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="4.11.3"
BR2_LINUX_KERNEL_DEFCONFIG="pseries"
BR2_LINUX_KERNEL_VMLINUX=y
BR2_TARGET_ROOTFS_EXT2=y
# BR2_TARGET_ROOTFS_TAR is not set
-# Linux headers same as kernel, a 4.9 series
-BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_4_9=y
+# Linux headers same as kernel, a 4.11 series
+BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_4_11=y
# Kernel
BR2_LINUX_KERNEL=y
BR2_LINUX_KERNEL_CUSTOM_VERSION=y
-BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="4.9.6"
+BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="4.11.3"
BR2_LINUX_KERNEL_USE_CUSTOM_CONFIG=y
-BR2_LINUX_KERNEL_CUSTOM_CONFIG_FILE="board/qemu/ppc-g3beige/linux-4.9.config"
+BR2_LINUX_KERNEL_CUSTOM_CONFIG_FILE="board/qemu/ppc-g3beige/linux-4.11.config"
BR2_LINUX_KERNEL_VMLINUX=y
# Serial port config
# BR2_TARGET_ROOTFS_TAR is not set
BR2_TARGET_ROOTFS_INITRAMFS=y
-# Linux headers same as kernel, a 4.9 series
-BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_4_9=y
+# Linux headers same as kernel, a 4.11 series
+BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_4_11=y
# Kernel
BR2_LINUX_KERNEL=y
BR2_LINUX_KERNEL_CUSTOM_VERSION=y
-BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="4.9.6"
+BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="4.11.3"
BR2_LINUX_KERNEL_USE_CUSTOM_CONFIG=y
-BR2_LINUX_KERNEL_CUSTOM_CONFIG_FILE="board/qemu/ppc-mpc8544ds/linux-4.9.config"
+BR2_LINUX_KERNEL_CUSTOM_CONFIG_FILE="board/qemu/ppc-mpc8544ds/linux-4.11.config"
BR2_LINUX_KERNEL_VMLINUX=y
# Serial port config
BR2_TARGET_ROOTFS_EXT2=y
# BR2_TARGET_ROOTFS_TAR is not set
-# Linux headers same as kernel, a 4.9 series
-BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_4_9=y
+# Linux headers same as kernel, a 4.11 series
+BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_4_11=y
# Linux kernel
BR2_LINUX_KERNEL=y
BR2_LINUX_KERNEL_CUSTOM_VERSION=y
-BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="4.9.6"
+BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="4.11.3"
BR2_LINUX_KERNEL_USE_CUSTOM_CONFIG=y
-BR2_LINUX_KERNEL_CUSTOM_CONFIG_FILE="board/qemu/sparc64-sun4u/linux-4.9.config"
+BR2_LINUX_KERNEL_CUSTOM_CONFIG_FILE="board/qemu/sparc64-sun4u/linux-4.11.config"
BR2_TARGET_ROOTFS_EXT2=y
# BR2_TARGET_ROOTFS_TAR is not set
-# Linux headers same as kernel, a 4.9 series
-BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_4_9=y
+# Linux headers same as kernel, a 4.11 series
+BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_4_11=y
# Linux kernel
BR2_LINUX_KERNEL=y
BR2_LINUX_KERNEL_CUSTOM_VERSION=y
-BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="4.9.6"
+BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="4.11.3"
BR2_LINUX_KERNEL_USE_CUSTOM_CONFIG=y
-BR2_LINUX_KERNEL_CUSTOM_CONFIG_FILE="board/qemu/sparc-ss10/linux-4.9.config"
+BR2_LINUX_KERNEL_CUSTOM_CONFIG_FILE="board/qemu/sparc-ss10/linux-4.11.config"
BR2_TARGET_ROOTFS_EXT2=y
# BR2_TARGET_ROOTFS_TAR is not set
-# Linux headers same as kernel, a 4.9 series
-BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_4_9=y
+# Linux headers same as kernel, a 4.11 series
+BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_4_11=y
# Kernel
BR2_LINUX_KERNEL=y
BR2_LINUX_KERNEL_CUSTOM_VERSION=y
-BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="4.9.6"
+BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="4.11.3"
BR2_LINUX_KERNEL_USE_CUSTOM_CONFIG=y
-BR2_LINUX_KERNEL_CUSTOM_CONFIG_FILE="board/qemu/x86_64/linux-4.9.config"
+BR2_LINUX_KERNEL_CUSTOM_CONFIG_FILE="board/qemu/x86_64/linux-4.11.config"
BR2_TARGET_ROOTFS_EXT2=y
# BR2_TARGET_ROOTFS_TAR is not set
-# Linux headers same as kernel, a 4.9 series
-BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_4_9=y
+# Linux headers same as kernel, a 4.11 series
+BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_4_11=y
# Kernel
BR2_LINUX_KERNEL=y
BR2_LINUX_KERNEL_CUSTOM_VERSION=y
-BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="4.9.6"
+BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="4.11.3"
BR2_LINUX_KERNEL_USE_CUSTOM_CONFIG=y
-BR2_LINUX_KERNEL_CUSTOM_CONFIG_FILE="board/qemu/x86/linux-4.9.config"
+BR2_LINUX_KERNEL_CUSTOM_CONFIG_FILE="board/qemu/x86/linux-4.11.config"
BR2_XTENSA_CORE_NAME="lx60"
BR2_XTENSA_OVERLAY_DIR="board/qemu/xtensa-lx60"
-# Patches
-BR2_GLOBAL_PATCH_DIR="board/qemu/xtensa-lx60"
-
# System
BR2_SYSTEM_DHCP="eth0"
BR2_TARGET_GENERIC_GETTY_PORT="ttyS0"
# BR2_TARGET_ROOTFS_TAR is not set
BR2_TARGET_ROOTFS_INITRAMFS=y
-# Linux headers same as kernel, a 4.9 series
-BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_4_9=y
+# Linux headers same as kernel, a 4.11 series
+BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_4_11=y
# Kernel
BR2_LINUX_KERNEL=y
BR2_LINUX_KERNEL_CUSTOM_VERSION=y
-BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="4.9.16"
+BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="4.11.3"
BR2_LINUX_KERNEL_USE_CUSTOM_CONFIG=y
-BR2_LINUX_KERNEL_CUSTOM_CONFIG_FILE="board/qemu/xtensa-lx60/linux-4.9.config"
+BR2_LINUX_KERNEL_CUSTOM_CONFIG_FILE="board/qemu/xtensa-lx60/linux-4.11.config"
BR2_LINUX_KERNEL_IMAGE_TARGET_CUSTOM=y
BR2_LINUX_KERNEL_IMAGE_NAME="Image.elf"
-BR2_LINUX_KERNEL_IMAGE_TARGET_NAME="zImage"
+BR2_LINUX_KERNEL_IMAGE_TARGET_NAME="Image"
BR2_PACKAGE_HOST_ELF2FLT=y
# BR2_USE_MMU is not set
-# Patches
-BR2_GLOBAL_PATCH_DIR="board/qemu/xtensa-lx60"
-
# System
BR2_SYSTEM_DHCP="eth0"
BR2_TARGET_GENERIC_GETTY_PORT="ttyS0"
# BR2_TARGET_ROOTFS_TAR is not set
BR2_TARGET_ROOTFS_INITRAMFS=y
-# Linux headers same as kernel, a 4.9 series
-BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_4_9=y
+# Linux headers same as kernel, a 4.11 series
+BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_4_11=y
# Kernel
BR2_LINUX_KERNEL=y
BR2_LINUX_KERNEL_CUSTOM_VERSION=y
-BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="4.9.16"
+BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="4.11.3"
BR2_LINUX_KERNEL_USE_CUSTOM_CONFIG=y
-BR2_LINUX_KERNEL_CUSTOM_CONFIG_FILE="board/qemu/xtensa-lx60/linux-4.9-nommu.config"
+BR2_LINUX_KERNEL_CUSTOM_CONFIG_FILE="board/qemu/xtensa-lx60/linux-4.11-nommu.config"
BR2_LINUX_KERNEL_IMAGE_TARGET_CUSTOM=y
BR2_LINUX_KERNEL_IMAGE_NAME="Image.elf"
-BR2_LINUX_KERNEL_IMAGE_TARGET_NAME="zImage"
+BR2_LINUX_KERNEL_IMAGE_TARGET_NAME="Image"
projects / buildroot.git / commitdiff