--- /dev/null
+/* Target dependent code for CRIS, for GDB, the GNU debugger.
+ Copyright 2001 Free Software Foundation, Inc.
+ Contributed by Axis Communications AB.
+ Written by Hendrik Ruijter, Stefan Andersson, and Orjan Friberg.
+
+This file is part of GDB.
+
+This program is free software; you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation; either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program; if not, write to the Free Software
+Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. */
+
+#include "defs.h"
+#include "frame.h"
+#include "symtab.h"
+#include "inferior.h"
+#include "gdbtypes.h"
+#include "gdbcore.h"
+#include "gdbcmd.h"
+#include "target.h"
+#include "value.h"
+#include "opcode/cris.h"
+#include "arch-utils.h"
+#include "regcache.h"
+
+/* To get entry_point_address. */
+#include "symfile.h"
+
+enum cris_num_regs
+{
+ /* There are no floating point registers. Used in gdbserver low-linux.c. */
+ NUM_FREGS = 0,
+
+ /* There are 16 general registers. */
+ NUM_GENREGS = 16,
+
+ /* There are 16 special registers. */
+ NUM_SPECREGS = 16
+};
+
+/* Register numbers of various important registers.
+ FP_REGNUM Contains address of executing stack frame.
+ STR_REGNUM Contains the address of structure return values.
+ RET_REGNUM Contains the return value when shorter than or equal to 32 bits
+ ARG1_REGNUM Contains the first parameter to a function.
+ ARG2_REGNUM Contains the second parameter to a function.
+ ARG3_REGNUM Contains the third parameter to a function.
+ ARG4_REGNUM Contains the fourth parameter to a function. Rest on stack.
+ SP_REGNUM Contains address of top of stack.
+ PC_REGNUM Contains address of next instruction.
+ SRP_REGNUM Subroutine return pointer register.
+ BRP_REGNUM Breakpoint return pointer register. */
+
+/* FP_REGNUM = 8, SP_REGNUM = 14, and PC_REGNUM = 15 have been incorporated
+ into the multi-arch framework. */
+
+enum cris_regnums
+{
+ /* Enums with respect to the general registers, valid for all
+ CRIS versions. */
+ STR_REGNUM = 9,
+ RET_REGNUM = 10,
+ ARG1_REGNUM = 10,
+ ARG2_REGNUM = 11,
+ ARG3_REGNUM = 12,
+ ARG4_REGNUM = 13,
+
+ /* Enums with respect to the special registers, some of which may not be
+ applicable to all CRIS versions. */
+ P0_REGNUM = 16,
+ VR_REGNUM = 17,
+ P2_REGNUM = 18,
+ P3_REGNUM = 19,
+ P4_REGNUM = 20,
+ CCR_REGNUM = 21,
+ MOF_REGNUM = 23,
+ P8_REGNUM = 24,
+ IBR_REGNUM = 25,
+ IRP_REGNUM = 26,
+ SRP_REGNUM = 27,
+ BAR_REGNUM = 28,
+ BRP_REGNUM = 30,
+ USP_REGNUM = 31
+};
+
+extern const struct cris_spec_reg cris_spec_regs[];
+
+/* CRIS version, set via the user command 'set cris-version'. Affects
+ register names and sizes.*/
+static int usr_cmd_cris_version;
+
+/* Indicates whether to trust the above variable. */
+static int usr_cmd_cris_version_valid = 0;
+
+/* CRIS mode, set via the user command 'set cris-mode'. Affects availability
+ of some registers. */
+static const char *usr_cmd_cris_mode;
+
+/* Indicates whether to trust the above variable. */
+static int usr_cmd_cris_mode_valid = 0;
+
+static const char CRIS_MODE_USER[] = "CRIS_MODE_USER";
+static const char CRIS_MODE_SUPERVISOR[] = "CRIS_MODE_SUPERVISOR";
+static const char *cris_mode_enums[] =
+{
+ CRIS_MODE_USER,
+ CRIS_MODE_SUPERVISOR,
+ 0
+};
+
+/* CRIS ABI, set via the user command 'set cris-abi'.
+ There are two flavours:
+ 1. Original ABI with 32-bit doubles, where arguments <= 4 bytes are
+ passed by value.
+ 2. New ABI with 64-bit doubles, where arguments <= 8 bytes are passed by
+ value. */
+static const char *usr_cmd_cris_abi;
+
+/* Indicates whether to trust the above variable. */
+static int usr_cmd_cris_abi_valid = 0;
+
+/* These variables are strings instead of enums to make them usable as
+ parameters to add_set_enum_cmd. */
+static const char CRIS_ABI_ORIGINAL[] = "CRIS_ABI_ORIGINAL";
+static const char CRIS_ABI_V2[] = "CRIS_ABI_V2";
+static const char CRIS_ABI_SYMBOL[] = ".$CRIS_ABI_V2";
+static const char *cris_abi_enums[] =
+{
+ CRIS_ABI_ORIGINAL,
+ CRIS_ABI_V2,
+ 0
+};
+
+/* CRIS architecture specific information. */
+struct gdbarch_tdep
+{
+ int cris_version;
+ const char *cris_mode;
+ const char *cris_abi;
+};
+
+/* Functions for accessing target dependent data. */
+
+static int
+cris_version (void)
+{
+ return (gdbarch_tdep (current_gdbarch)->cris_version);
+}
+
+static const char *
+cris_mode (void)
+{
+ return (gdbarch_tdep (current_gdbarch)->cris_mode);
+}
+
+static const char *
+cris_abi (void)
+{
+ return (gdbarch_tdep (current_gdbarch)->cris_abi);
+}
+
+/* For saving call-clobbered contents in R9 when returning structs. */
+static CORE_ADDR struct_return_address;
+
+struct frame_extra_info
+{
+ CORE_ADDR return_pc;
+ int leaf_function;
+};
+
+/* The instruction environment needed to find single-step breakpoints. */
+typedef
+struct instruction_environment
+{
+ unsigned long reg[NUM_GENREGS];
+ unsigned long preg[NUM_SPECREGS];
+ unsigned long branch_break_address;
+ unsigned long delay_slot_pc;
+ unsigned long prefix_value;
+ int branch_found;
+ int prefix_found;
+ int invalid;
+ int slot_needed;
+ int delay_slot_pc_active;
+ int xflag_found;
+ int disable_interrupt;
+} inst_env_type;
+
+/* Save old breakpoints in order to restore the state before a single_step.
+ At most, two breakpoints will have to be remembered. */
+typedef
+char binsn_quantum[BREAKPOINT_MAX];
+static binsn_quantum break_mem[2];
+static CORE_ADDR next_pc = 0;
+static CORE_ADDR branch_target_address = 0;
+static unsigned char branch_break_inserted = 0;
+
+/* Machine-dependencies in CRIS for opcodes. */
+
+/* Instruction sizes. */
+enum cris_instruction_sizes
+{
+ INST_BYTE_SIZE = 0,
+ INST_WORD_SIZE = 1,
+ INST_DWORD_SIZE = 2
+};
+
+/* Addressing modes. */
+enum cris_addressing_modes
+{
+ REGISTER_MODE = 1,
+ INDIRECT_MODE = 2,
+ AUTOINC_MODE = 3
+};
+
+/* Prefix addressing modes. */
+enum cris_prefix_addressing_modes
+{
+ PREFIX_INDEX_MODE = 2,
+ PREFIX_ASSIGN_MODE = 3,
+
+ /* Handle immediate byte offset addressing mode prefix format. */
+ PREFIX_OFFSET_MODE = 2
+};
+
+/* Masks for opcodes. */
+enum cris_opcode_masks
+{
+ BRANCH_SIGNED_SHORT_OFFSET_MASK = 0x1,
+ SIGNED_EXTEND_BIT_MASK = 0x2,
+ SIGNED_BYTE_MASK = 0x80,
+ SIGNED_BYTE_EXTEND_MASK = 0xFFFFFF00,
+ SIGNED_WORD_MASK = 0x8000,
+ SIGNED_WORD_EXTEND_MASK = 0xFFFF0000,
+ SIGNED_DWORD_MASK = 0x80000000,
+ SIGNED_QUICK_VALUE_MASK = 0x20,
+ SIGNED_QUICK_VALUE_EXTEND_MASK = 0xFFFFFFC0
+};
+
+/* Functions for opcodes. The general form of the ETRAX 16-bit instruction:
+ Bit 15 - 12 Operand2
+ 11 - 10 Mode
+ 9 - 6 Opcode
+ 5 - 4 Size
+ 3 - 0 Operand1 */
+
+static int
+cris_get_operand2 (unsigned short insn)
+{
+ return ((insn & 0xF000) >> 12);
+}
+
+static int
+cris_get_mode (unsigned short insn)
+{
+ return ((insn & 0x0C00) >> 10);
+}
+
+static int
+cris_get_opcode (unsigned short insn)
+{
+ return ((insn & 0x03C0) >> 6);
+}
+
+static int
+cris_get_size (unsigned short insn)
+{
+ return ((insn & 0x0030) >> 4);
+}
+
+static int
+cris_get_operand1 (unsigned short insn)
+{
+ return (insn & 0x000F);
+}
+
+/* Additional functions in order to handle opcodes. */
+
+static int
+cris_get_wide_opcode (unsigned short insn)
+{
+ return ((insn & 0x03E0) >> 5);
+}
+
+static int
+cris_get_short_size (unsigned short insn)
+{
+ return ((insn & 0x0010) >> 4);
+}
+
+static int
+cris_get_quick_value (unsigned short insn)
+{
+ return (insn & 0x003F);
+}
+
+static int
+cris_get_bdap_quick_offset (unsigned short insn)
+{
+ return (insn & 0x00FF);
+}
+
+static int
+cris_get_branch_short_offset (unsigned short insn)
+{
+ return (insn & 0x00FF);
+}
+
+static int
+cris_get_asr_shift_steps (unsigned long value)
+{
+ return (value & 0x3F);
+}
+
+static int
+cris_get_asr_quick_shift_steps (unsigned short insn)
+{
+ return (insn & 0x1F);
+}
+
+static int
+cris_get_clear_size (unsigned short insn)
+{
+ return ((insn) & 0xC000);
+}
+
+static int
+cris_is_signed_extend_bit_on (unsigned short insn)
+{
+ return (((insn) & 0x20) == 0x20);
+}
+
+static int
+cris_is_xflag_bit_on (unsigned short insn)
+{
+ return (((insn) & 0x1000) == 0x1000);
+}
+
+static void
+cris_set_size_to_dword (unsigned short *insn)
+{
+ *insn &= 0xFFCF;
+ *insn |= 0x20;
+}
+
+static char
+cris_get_signed_offset (unsigned short insn)
+{
+ return ((char) (insn & 0x00FF));
+}
+
+/* Calls an op function given the op-type, working on the insn and the
+ inst_env. */
+static void cris_gdb_func (enum cris_op_type, unsigned short, inst_env_type *);
+
+static CORE_ADDR cris_skip_prologue_main (CORE_ADDR pc, int frameless_p);
+
+static struct gdbarch *cris_gdbarch_init (struct gdbarch_info,
+ struct gdbarch_list *);
+
+static int cris_delayed_get_disassembler (bfd_vma, disassemble_info *);
+
+static void cris_dump_tdep (struct gdbarch *, struct ui_file *);
+
+static void cris_version_update (char *ignore_args, int from_tty,
+ struct cmd_list_element *c);
+
+static void cris_mode_update (char *ignore_args, int from_tty,
+ struct cmd_list_element *c);
+
+static void cris_abi_update (char *ignore_args, int from_tty,
+ struct cmd_list_element *c);
+
+static CORE_ADDR bfd_lookup_symbol (bfd *, const char *);
+
+/* Frames information. The definition of the struct frame_info is
+
+ CORE_ADDR frame
+ CORE_ADDR pc
+ int signal_handler_caller
+ CORE_ADDR return_pc
+ int leaf_function
+
+ If the compilation option -fno-omit-frame-pointer is present the
+ variable frame will be set to the content of R8 which is the frame
+ pointer register.
+
+ The variable pc contains the address where execution is performed
+ in the present frame. The innermost frame contains the current content
+ of the register PC. All other frames contain the content of the
+ register PC in the next frame.
+
+ The variable signal_handler_caller is non-zero when the frame is
+ associated with the call of a signal handler.
+
+ The variable return_pc contains the address where execution should be
+ resumed when the present frame has finished, the return address.
+
+ The variable leaf_function is 1 if the return address is in the register
+ SRP, and 0 if it is on the stack.
+
+ Prologue instructions C-code.
+ The prologue may consist of (-fno-omit-frame-pointer)
+ 1) 2)
+ push srp
+ push r8 push r8
+ move.d sp,r8 move.d sp,r8
+ subq X,sp subq X,sp
+ movem rY,[sp] movem rY,[sp]
+ move.S rZ,[r8-U] move.S rZ,[r8-U]
+
+ where 1 is a non-terminal function, and 2 is a leaf-function.
+
+ Note that this assumption is extremely brittle, and will break at the
+ slightest change in GCC's prologue.
+
+ If local variables are declared or register contents are saved on stack
+ the subq-instruction will be present with X as the number of bytes
+ needed for storage. The reshuffle with respect to r8 may be performed
+ with any size S (b, w, d) and any of the general registers Z={0..13}.
+ The offset U should be representable by a signed 8-bit value in all cases.
+ Thus, the prefix word is assumed to be immediate byte offset mode followed
+ by another word containing the instruction.
+
+ Degenerate cases:
+ 3)
+ push r8
+ move.d sp,r8
+ move.d r8,sp
+ pop r8
+
+ Prologue instructions C++-code.
+ Case 1) and 2) in the C-code may be followed by
+
+ move.d r10,rS ; this
+ move.d r11,rT ; P1
+ move.d r12,rU ; P2
+ move.d r13,rV ; P3
+ move.S [r8+U],rZ ; P4
+
+ if any of the call parameters are stored. The host expects these
+ instructions to be executed in order to get the call parameters right. */
+
+/* Examine the prologue of a function. The variable ip is the address of
+ the first instruction of the prologue. The variable limit is the address
+ of the first instruction after the prologue. The variable fi contains the
+ information in struct frame_info. The variable frameless_p controls whether
+ the entire prologue is examined (0) or just enough instructions to
+ determine that it is a prologue (1). */
+
+CORE_ADDR
+cris_examine (CORE_ADDR ip, CORE_ADDR limit, struct frame_info *fi,
+ int frameless_p)
+{
+ /* Present instruction. */
+ unsigned short insn;
+
+ /* Next instruction, lookahead. */
+ unsigned short insn_next;
+ int regno;
+
+ /* Is there a push fp? */
+ int have_fp;
+
+ /* Number of byte on stack used for local variables and movem. */
+ int val;
+
+ /* Highest register number in a movem. */
+ int regsave;
+
+ /* move.d r<source_register>,rS */
+ short source_register;
+
+ /* This frame is with respect to a leaf until a push srp is found. */
+ fi->extra_info->leaf_function = 1;
+
+ /* This frame is without the FP until a push fp is found. */
+ have_fp = 0;
+
+ /* Assume nothing on stack. */
+ val = 0;
+ regsave = -1;
+
+ /* No information about register contents so far. */
+
+ /* We only want to know the end of the prologue when fi->saved_regs == 0.
+ When the saved registers are allocated full information is required. */
+ if (fi->saved_regs)
+ {
+ for (regno = 0; regno < NUM_REGS; regno++)
+ fi->saved_regs[regno] = 0;
+ }
+
+ /* Find the prologue instructions. */
+ do
+ {
+ insn = read_memory_unsigned_integer (ip, sizeof (short));
+ ip += sizeof (short);
+ if (insn == 0xE1FC)
+ {
+ /* push <reg> 32 bit instruction */
+ insn_next = read_memory_unsigned_integer (ip, sizeof (short));
+ ip += sizeof (short);
+ regno = cris_get_operand2 (insn_next);
+ if (regno == (SRP_REGNUM - NUM_GENREGS))
+ {
+ if (frameless_p)
+ {
+ return ip;
+ }
+ fi->extra_info->leaf_function = 0;
+ }
+ else if (regno == FP_REGNUM)
+ {
+ have_fp = 1;
+ }
+ }
+ else if (insn == 0x866E)
+ {
+ /* move.d sp,r8 */
+ if (frameless_p)
+ {
+ return ip;
+ }
+ continue;
+ }
+ else if (cris_get_operand2 (insn) == SP_REGNUM
+ && cris_get_mode (insn) == 0x0000
+ && cris_get_opcode (insn) == 0x000A)
+ {
+ /* subq <val>,sp */
+ val = cris_get_quick_value (insn);
+ }
+ else if (cris_get_mode (insn) == 0x0002
+ && cris_get_opcode (insn) == 0x000F
+ && cris_get_size (insn) == 0x0003
+ && cris_get_operand1 (insn) == SP_REGNUM)
+ {
+ /* movem r<regsave>,[sp] */
+ if (frameless_p)
+ {
+ return ip;
+ }
+ regsave = cris_get_operand2 (insn);
+ }
+ else if (cris_get_operand2 (insn) == SP_REGNUM
+ && ((insn & 0x0F00) >> 8) == 0x0001
+ && (cris_get_signed_offset (insn) < 0))
+ {
+ /* Immediate byte offset addressing prefix word with sp as base
+ register. Used for CRIS v8 i.e. ETRAX 100 and newer if <val>
+ is between 64 and 128.
+ movem r<regsave>,[sp=sp-<val>] */
+ val = -cris_get_signed_offset (insn);
+ insn_next = read_memory_unsigned_integer (ip, sizeof (short));
+ ip += sizeof (short);
+ if (cris_get_mode (insn_next) == PREFIX_ASSIGN_MODE
+ && cris_get_opcode (insn_next) == 0x000F
+ && cris_get_size (insn_next) == 0x0003
+ && cris_get_operand1 (insn_next) == SP_REGNUM)
+ {
+ if (frameless_p)
+ {
+ return ip;
+ }
+ regsave = cris_get_operand2 (insn_next);
+ }
+ else
+ {
+ /* The prologue ended before the limit was reached. */
+ ip -= 2 * sizeof (short);
+ break;
+ }
+ }
+ else if (cris_get_mode (insn) == 0x0001
+ && cris_get_opcode (insn) == 0x0009
+ && cris_get_size (insn) == 0x0002)
+ {
+ /* move.d r<10..13>,r<0..15> */
+ if (frameless_p)
+ {
+ return ip;
+ }
+ source_register = cris_get_operand1 (insn);
+ if (source_register < ARG1_REGNUM || source_register > ARG4_REGNUM)
+ {
+ /* The prologue ended before the limit was reached. */
+ ip -= sizeof (short);
+ break;
+ }
+ }
+ else if (cris_get_operand2 (insn) == FP_REGNUM
+ /* The size is a fixed-size. */
+ && ((insn & 0x0F00) >> 8) == 0x0001
+ /* A negative offset. */
+ && (cris_get_signed_offset (insn) < 0))
+ {
+ /* move.S rZ,[r8-U] (?) */
+ insn_next = read_memory_unsigned_integer (ip, sizeof (short));
+ ip += sizeof (short);
+ regno = cris_get_operand2 (insn_next);
+ if ((regno >= 0 && regno < SP_REGNUM)
+ && cris_get_mode (insn_next) == PREFIX_OFFSET_MODE
+ && cris_get_opcode (insn_next) == 0x000F)
+ {
+ /* move.S rZ,[r8-U] */
+ continue;
+ }
+ else
+ {
+ /* The prologue ended before the limit was reached. */
+ ip -= 2 * sizeof (short);
+ break;
+ }
+ }
+ else if (cris_get_operand2 (insn) == FP_REGNUM
+ /* The size is a fixed-size. */
+ && ((insn & 0x0F00) >> 8) == 0x0001
+ /* A positive offset. */
+ && (cris_get_signed_offset (insn) > 0))
+ {
+ /* move.S [r8+U],rZ (?) */
+ insn_next = read_memory_unsigned_integer (ip, sizeof (short));
+ ip += sizeof (short);
+ regno = cris_get_operand2 (insn_next);
+ if ((regno >= 0 && regno < SP_REGNUM)
+ && cris_get_mode (insn_next) == PREFIX_OFFSET_MODE
+ && cris_get_opcode (insn_next) == 0x0009
+ && cris_get_operand1 (insn_next) == regno)
+ {
+ /* move.S [r8+U],rZ */
+ continue;
+ }
+ else
+ {
+ /* The prologue ended before the limit was reached. */
+ ip -= 2 * sizeof (short);
+ break;
+ }
+ }
+ else
+ {
+ /* The prologue ended before the limit was reached. */
+ ip -= sizeof (short);
+ break;
+ }
+ }
+ while (ip < limit);
+
+ /* We only want to know the end of the prologue when
+ fi->saved_regs == 0. */
+ if (!fi->saved_regs)
+ return ip;
+
+ if (have_fp)
+ {
+ fi->saved_regs[FP_REGNUM] = FRAME_FP (fi);
+
+ /* Calculate the addresses. */
+ for (regno = regsave; regno >= 0; regno--)
+ {
+ fi->saved_regs[regno] = FRAME_FP (fi) - val;
+ val -= 4;
+ }
+ if (fi->extra_info->leaf_function)
+ {
+ /* Set the register SP to contain the stack pointer of
+ the caller. */
+ fi->saved_regs[SP_REGNUM] = FRAME_FP (fi) + 4;
+ }
+ else
+ {
+ /* Set the register SP to contain the stack pointer of
+ the caller. */
+ fi->saved_regs[SP_REGNUM] = FRAME_FP (fi) + 8;
+
+ /* Set the register SRP to contain the return address of
+ the caller. */
+ fi->saved_regs[SRP_REGNUM] = FRAME_FP (fi) + 4;
+ }
+ }
+ return ip;
+}
+
+/* Advance pc beyond any function entry prologue instructions at pc
+ to reach some "real" code. */
+
+CORE_ADDR
+cris_skip_prologue (CORE_ADDR pc)
+{
+ return cris_skip_prologue_main (pc, 0);
+}
+
+/* As cris_skip_prologue, but stops as soon as it knows that the function
+ has a frame. Its result is equal to its input pc if the function is
+ frameless, unequal otherwise. */
+
+CORE_ADDR
+cris_skip_prologue_frameless_p (CORE_ADDR pc)
+{
+ return cris_skip_prologue_main (pc, 1);
+}
+
+/* Given a PC value corresponding to the start of a function, return the PC
+ of the first instruction after the function prologue. */
+
+CORE_ADDR
+cris_skip_prologue_main (CORE_ADDR pc, int frameless_p)
+{
+ struct frame_info fi;
+ static struct frame_extra_info fei;
+ struct symtab_and_line sal = find_pc_line (pc, 0);
+ int best_limit;
+ CORE_ADDR pc_after_prologue;
+
+ /* frame_info now contains dynamic memory. Since fi is a dummy here,
+ I use static memory for extra_info, and don't bother allocating
+ memory for saved_regs. */
+ fi.saved_regs = 0;
+ fi.extra_info = &fei;
+
+ /* If there is no symbol information then sal.end == 0, and we end up
+ examining only the first instruction in the function prologue.
+ Exaggerating the limit seems to be harmless. */
+ if (sal.end > 0)
+ best_limit = sal.end;
+ else
+ best_limit = pc + 100;
+
+ pc_after_prologue = cris_examine (pc, best_limit, &fi, frameless_p);
+ return pc_after_prologue;
+}
+
+/* Use the program counter to determine the contents and size of a breakpoint
+ instruction. It returns a pointer to a string of bytes that encode a
+ breakpoint instruction, stores the length of the string to *lenptr, and
+ adjusts pcptr (if necessary) to point to the actual memory location where
+ the breakpoint should be inserted. */
+
+unsigned char *
+cris_breakpoint_from_pc (CORE_ADDR *pcptr, int *lenptr)
+{
+ static unsigned char break_insn[] = {0x38, 0xe9};
+ *lenptr = 2;
+
+ return break_insn;
+}
+
+/* Returns the register SRP (subroutine return pointer) which must contain
+ the content of the register PC after a function call. */
+
+CORE_ADDR
+cris_saved_pc_after_call ()
+{
+ return read_register (SRP_REGNUM);
+}
+
+/* Returns 1 if spec_reg is applicable to the current gdbarch's CRIS version,
+ 0 otherwise. */
+
+int
+cris_spec_reg_applicable (struct cris_spec_reg spec_reg)
+{
+ int version = cris_version ();
+
+ switch (spec_reg.applicable_version)
+ {
+ case cris_ver_version_all:
+ return 1;
+ case cris_ver_warning:
+ /* Indeterminate/obsolete. */
+ return 0;
+ case cris_ver_sim:
+ /* Simulator only. */
+ return 0;
+ case cris_ver_v0_3:
+ return (version >= 0 && version <= 3);
+ case cris_ver_v3p:
+ return (version >= 3);
+ case cris_ver_v8:
+ return (version == 8 || version == 9);
+ case cris_ver_v8p:
+ return (version >= 8);
+ case cris_ver_v10p:
+ return (version >= 10);
+ default:
+ /* Invalid cris version. */
+ return 0;
+ }
+}
+
+/* Returns the register size in unit byte. Returns 0 for an unimplemented
+ register, -1 for an invalid register. */
+
+int
+cris_register_size (int regno)
+{
+ int i;
+ int spec_regno;
+
+ if (regno >= 0 && regno < NUM_GENREGS)
+ {
+ /* General registers (R0 - R15) are 32 bits. */
+ return 4;
+ }
+ else if (regno >= NUM_GENREGS && regno < NUM_REGS)
+ {
+ /* Special register (R16 - R31). cris_spec_regs is zero-based.
+ Adjust regno accordingly. */
+ spec_regno = regno - NUM_GENREGS;
+
+ /* The entries in cris_spec_regs are stored in register number order,
+ which means we can shortcut into the array when searching it. */
+ for (i = spec_regno; cris_spec_regs[i].name != NULL; i++)
+ {
+ if (cris_spec_regs[i].number == spec_regno
+ && cris_spec_reg_applicable (cris_spec_regs[i]))
+ /* Go with the first applicable register. */
+ return cris_spec_regs[i].reg_size;
+ }
+ /* Special register not applicable to this CRIS version. */
+ return 0;
+ }
+ else
+ {
+ /* Invalid register. */
+ return -1;
+ }
+}
+
+/* Nonzero if regno should not be fetched from the target. This is the case
+ for unimplemented (size 0) and non-existant registers. */
+
+int
+cris_cannot_fetch_register (int regno)
+{
+ return ((regno < 0 || regno >= NUM_REGS)
+ || (cris_register_size (regno) == 0));
+}
+
+/* Nonzero if regno should not be written to the target, for various
+ reasons. */
+
+int
+cris_cannot_store_register (int regno)
+{
+ /* There are three kinds of registers we refuse to write to.
+ 1. Those that not implemented.
+ 2. Those that are read-only (depends on the processor mode).
+ 3. Those registers to which a write has no effect.
+ */
+
+ if (regno < 0 || regno >= NUM_REGS || cris_register_size (regno) == 0)
+ /* Not implemented. */
+ return 1;
+
+ else if (regno == VR_REGNUM)
+ /* Read-only. */
+ return 1;
+
+ else if (regno == P0_REGNUM || regno == P4_REGNUM || regno == P8_REGNUM)
+ /* Writing has no effect. */
+ return 1;
+
+ else if (cris_mode () == CRIS_MODE_USER)
+ {
+ if (regno == IBR_REGNUM || regno == BAR_REGNUM || regno == BRP_REGNUM
+ || regno == IRP_REGNUM)
+ /* Read-only in user mode. */
+ return 1;
+ }
+
+ return 0;
+}
+
+/* Returns the register offset for the first byte of register regno's space
+ in the saved register state. Returns -1 for an invalid or unimplemented
+ register. */
+
+int
+cris_register_offset (int regno)
+{
+ int i;
+ int reg_size;
+ int offset = 0;
+
+ if (regno >= 0 && regno < NUM_REGS)
+ {
+ /* FIXME: The offsets should be cached and calculated only once,
+ when the architecture being debugged has changed. */
+ for (i = 0; i < regno; i++)
+ offset += cris_register_size (i);
+
+ return offset;
+ }
+ else
+ {
+ /* Invalid register. */
+ return -1;
+ }
+}
+
+/* Return the GDB type (defined in gdbtypes.c) for the "standard" data type
+ of data in register regno. */
+
+struct type *
+cris_register_virtual_type (int regno)
+{
+ if (regno == SP_REGNUM || regno == PC_REGNUM
+ || (regno > P8_REGNUM && regno < USP_REGNUM))
+ {
+ /* SP, PC, IBR, IRP, SRP, BAR, DCCR, BRP */
+ return lookup_pointer_type (builtin_type_void);
+ }
+ else if (regno == P8_REGNUM || regno == USP_REGNUM
+ || (regno >= 0 && regno < SP_REGNUM))
+ {
+ /* R0 - R13, P8, P15 */
+ return builtin_type_unsigned_long;
+ }
+ else if (regno > P3_REGNUM && regno < P8_REGNUM)
+ {
+ /* P4, CCR, DCR0, DCR1 */
+ return builtin_type_unsigned_short;
+ }
+ else if (regno > PC_REGNUM && regno < P4_REGNUM)
+ {
+ /* P0, P1, P2, P3 */
+ return builtin_type_unsigned_char;
+ }
+ else
+ {
+ /* Invalid register. */
+ return builtin_type_void;
+ }
+}
+
+/* Stores a function return value of type type, where valbuf is the address
+ of the value to be stored. */
+
+/* In the original CRIS ABI, R10 is used to store return values. */
+
+void
+cris_abi_original_store_return_value (struct type *type, char *valbuf)
+{
+ int len = TYPE_LENGTH (type);
+
+ if (len <= REGISTER_SIZE)
+ write_register_bytes (REGISTER_BYTE (RET_REGNUM), valbuf, len);
+ else
+ internal_error (__FILE__, __LINE__, "cris_abi_original_store_return_value: type length too large.");
+}
+
+/* In the CRIS ABI V2, R10 and R11 are used to store return values. */
+
+void
+cris_abi_v2_store_return_value (struct type *type, char *valbuf)
+{
+ int len = TYPE_LENGTH (type);
+
+ if (len <= 2 * REGISTER_SIZE)
+ {
+ /* Note that this works since R10 and R11 are consecutive registers. */
+ write_register_bytes (REGISTER_BYTE (RET_REGNUM), valbuf, len);
+ }
+ else
+ internal_error (__FILE__, __LINE__, "cris_abi_v2_store_return_value: type length too large.");
+}
+
+/* Return the name of register regno as a string. Return NULL for an invalid or
+ unimplemented register. */
+
+char *
+cris_register_name (int regno)
+{
+ static char *cris_genreg_names[] =
+ { "r0", "r1", "r2", "r3", \
+ "r4", "r5", "r6", "r7", \
+ "r8", "r9", "r10", "r11", \
+ "r12", "r13", "sp", "pc" };
+
+ int i;
+ int spec_regno;
+
+ if (regno >= 0 && regno < NUM_GENREGS)
+ {
+ /* General register. */
+ return cris_genreg_names[regno];
+ }
+ else if (regno >= NUM_GENREGS && regno < NUM_REGS)
+ {
+ /* Special register (R16 - R31). cris_spec_regs is zero-based.
+ Adjust regno accordingly. */
+ spec_regno = regno - NUM_GENREGS;
+
+ /* The entries in cris_spec_regs are stored in register number order,
+ which means we can shortcut into the array when searching it. */
+ for (i = spec_regno; cris_spec_regs[i].name != NULL; i++)
+ {
+ if (cris_spec_regs[i].number == spec_regno
+ && cris_spec_reg_applicable (cris_spec_regs[i]))
+ /* Go with the first applicable register. */
+ return cris_spec_regs[i].name;
+ }
+ /* Special register not applicable to this CRIS version. */
+ return NULL;
+ }
+ else
+ {
+ /* Invalid register. */
+ return NULL;
+ }
+}
+
+int
+cris_register_bytes_ok (long bytes)
+{
+ return (bytes == REGISTER_BYTES);
+}
+
+/* Extract from an array regbuf containing the raw register state a function
+ return value of type type, and copy that, in virtual format, into
+ valbuf. */
+
+/* In the original CRIS ABI, R10 is used to return values. */
+
+void
+cris_abi_original_extract_return_value (struct type *type, char *regbuf,
+ char *valbuf)
+{
+ int len = TYPE_LENGTH (type);
+
+ if (len <= REGISTER_SIZE)
+ memcpy (valbuf, regbuf + REGISTER_BYTE (RET_REGNUM), len);
+ else
+ internal_error (__FILE__, __LINE__, "cris_abi_original_extract_return_value: type length too large");
+}
+
+/* In the CRIS ABI V2, R10 and R11 are used to store return values. */
+
+void
+cris_abi_v2_extract_return_value (struct type *type, char *regbuf,
+ char *valbuf)
+{
+ int len = TYPE_LENGTH (type);
+
+ if (len <= 2 * REGISTER_SIZE)
+ memcpy (valbuf, regbuf + REGISTER_BYTE (RET_REGNUM), len);
+ else
+ internal_error (__FILE__, __LINE__, "cris_abi_v2_extract_return_value: type length too large");
+}
+
+/* Store the address of the place in which to copy the structure the
+ subroutine will return. In the CRIS ABI, R9 is used in order to pass
+ the address of the allocated area where a structure return value must
+ be stored. R9 is call-clobbered, which means we must save it here for
+ later use. */
+
+void
+cris_store_struct_return (CORE_ADDR addr, CORE_ADDR sp)
+{
+ write_register (STR_REGNUM, addr);
+ struct_return_address = addr;
+}
+
+/* Extract from regbuf the address where a function should return a
+ structure value. It's not there in the CRIS ABI, so we must do it another
+ way. */
+
+CORE_ADDR
+cris_extract_struct_value_address (char *regbuf)
+{
+ return struct_return_address;
+}
+
+/* Returns 1 if a value of the given type being returned from a function
+ must have space allocated for it on the stack. gcc_p is true if the
+ function being considered is known to have been compiled by GCC.
+ In the CRIS ABI, structure return values are passed to the called
+ function by reference in register R9 to a caller-allocated area, so
+ this is always true. */
+
+int
+cris_use_struct_convention (int gcc_p, struct type *type)
+{
+ return 1;
+}
+
+/* Returns 1 if the given type will be passed by pointer rather than
+ directly. */
+
+/* In the original CRIS ABI, arguments shorter than or equal to 32 bits are
+ passed by value. */
+
+int
+cris_abi_original_reg_struct_has_addr (int gcc_p, struct type *type)
+{
+ return (TYPE_LENGTH (type) > 4);
+}
+
+/* In the CRIS ABI V2, arguments shorter than or equal to 64 bits are passed
+ by value. */
+
+int
+cris_abi_v2_reg_struct_has_addr (int gcc_p, struct type *type)
+{
+ return (TYPE_LENGTH (type) > 8);
+}
+
+/* Returns 1 if the function invocation represented by fi does not have a
+ stack frame associated with it. Otherwise return 0. */
+
+int
+cris_frameless_function_invocation (struct frame_info *fi)
+{
+ if (fi->signal_handler_caller)
+ return 0;
+ else
+ return frameless_look_for_prologue (fi);
+}
+
+/* See frame.h. Determines the address of all registers in the current stack
+ frame storing each in frame->saved_regs. Space for frame->saved_regs shall
+ be allocated by FRAME_INIT_SAVED_REGS using either frame_saved_regs_zalloc
+ or frame_obstack_alloc. */
+
+void
+cris_frame_init_saved_regs (struct frame_info *fi)
+{
+ CORE_ADDR ip;
+ struct symtab_and_line sal;
+ int best_limit;
+ char *dummy_regs = generic_find_dummy_frame (fi->pc, fi->frame);
+
+ /* Examine the entire prologue. */
+ register int frameless_p = 0;
+
+ /* Has this frame's registers already been initialized? */
+ if (fi->saved_regs)
+ return;
+
+ frame_saved_regs_zalloc (fi);
+
+ if (dummy_regs)
+ {
+ /* I don't see this ever happening, considering the context in which
+ cris_frame_init_saved_regs is called (always when we're not in
+ a dummy frame). */
+ memcpy (&fi->saved_regs, dummy_regs, sizeof (fi->saved_regs));
+ }
+ else
+ {
+ ip = get_pc_function_start (fi->pc);
+ sal = find_pc_line (ip, 0);
+
+ /* If there is no symbol information then sal.end == 0, and we end up
+ examining only the first instruction in the function prologue.
+ Exaggerating the limit seems to be harmless. */
+ if (sal.end > 0)
+ best_limit = sal.end;
+ else
+ best_limit = ip + 100;
+
+ cris_examine (ip, best_limit, fi, frameless_p);
+ }
+}
+
+/* Initialises the extra frame information at the creation of a new frame.
+ The inparameter fromleaf is 0 when the call is from create_new_frame.
+ When the call is from get_prev_frame_info, fromleaf is determined by
+ cris_frameless_function_invocation. */
+
+void
+cris_init_extra_frame_info (int fromleaf, struct frame_info *fi)
+{
+ if (fi->next)
+ {
+ /* Called from get_prev_frame. */
+ fi->pc = FRAME_SAVED_PC (fi->next);
+ }
+
+ fi->extra_info = (struct frame_extra_info *)
+ frame_obstack_alloc (sizeof (struct frame_extra_info));
+
+ fi->extra_info->return_pc = 0;
+ fi->extra_info->leaf_function = 0;
+
+ if (PC_IN_CALL_DUMMY (fi->pc, fi->frame, fi->frame))
+ {
+ /* We need to setup fi->frame here because run_stack_dummy gets it wrong
+ by assuming it's always FP. */
+ fi->frame = generic_read_register_dummy (fi->pc, fi->frame, SP_REGNUM);
+ fi->extra_info->return_pc =
+ generic_read_register_dummy (fi->pc, fi->frame, PC_REGNUM);
+
+ /* FIXME: Is this necessarily true? */
+ fi->extra_info->leaf_function = 0;
+ }
+ else
+ {
+ cris_frame_init_saved_regs (fi);
+
+ /* Check fromleaf/frameless_function_invocation. (FIXME) */
+
+ if (fi->saved_regs[SRP_REGNUM] != 0)
+ {
+ /* SRP was saved on the stack; non-leaf function. */
+ fi->extra_info->return_pc =
+ read_memory_integer (fi->saved_regs[SRP_REGNUM],
+ REGISTER_RAW_SIZE (SRP_REGNUM));
+ }
+ else
+ {
+ /* SRP is still in a register; leaf function. */
+ fi->extra_info->return_pc = read_register (SRP_REGNUM);
+ /* FIXME: Should leaf_function be set to 1 here? */
+ fi->extra_info->leaf_function = 1;
+ }
+ }
+}
+
+/* Return the content of the frame pointer in the present frame. In other
+ words, determine the address of the calling function's frame. */
+
+CORE_ADDR
+cris_frame_chain (struct frame_info *fi)
+{
+ if (PC_IN_CALL_DUMMY (fi->pc, fi->frame, fi->frame))
+ {
+ return fi->frame;
+ }
+ else if (!inside_entry_file (fi->pc))
+ {
+ return read_memory_unsigned_integer (FRAME_FP (fi), 4);
+ }
+ else
+ {
+ return 0;
+ }
+}
+
+/* Return the saved PC (which equals the return address) of this frame. */
+
+CORE_ADDR
+cris_frame_saved_pc (struct frame_info *fi)
+{
+ return fi->extra_info->return_pc;
+}
+
+/* Return the address of the argument block for the frame described
+ by struct frame_info. */
+
+CORE_ADDR
+cris_frame_args_address (struct frame_info *fi)
+{
+ return FRAME_FP (fi);
+}
+
+/* Return the address of the locals block for the frame
+ described by struct frame_info. */
+
+CORE_ADDR
+cris_frame_locals_address (struct frame_info *fi)
+{
+ return FRAME_FP (fi);
+}
+
+/* Setup the function arguments for calling a function in the inferior. */
+
+CORE_ADDR
+cris_abi_original_push_arguments (int nargs, struct value **args,
+ CORE_ADDR sp, int struct_return,
+ CORE_ADDR struct_addr)
+{
+ int stack_alloc;
+ int stack_offset;
+ int argreg;
+ int argnum;
+ struct type *type;
+ int len;
+ CORE_ADDR regval;
+ char *val;
+
+ /* Data and parameters reside in different areas on the stack.
+ Both frame pointers grow toward higher addresses. */
+ CORE_ADDR fp_params;
+ CORE_ADDR fp_data;
+
+ /* Are we returning a value using a structure return or a normal value
+ return? struct_addr is the address of the reserved space for the return
+ structure to be written on the stack. */
+ if (struct_return)
+ {
+ write_register (STR_REGNUM, struct_addr);
+ }
+
+ /* Make sure there's space on the stack. Allocate space for data and a
+ parameter to refer to that data. */
+ for (argnum = 0, stack_alloc = 0; argnum < nargs; argnum++)
+ stack_alloc += (TYPE_LENGTH (VALUE_TYPE (args[argnum])) + REGISTER_SIZE);
+ sp -= stack_alloc;
+ /* We may over-allocate a little here, but that won't hurt anything. */
+
+ /* Initialize stack frame pointers. */
+ fp_params = sp;
+ fp_data = sp + (nargs * REGISTER_SIZE);
+
+ /* Now load as many as possible of the first arguments into
+ registers, and push the rest onto the stack. */
+ argreg = ARG1_REGNUM;
+ stack_offset = 0;
+
+ for (argnum = 0; argnum < nargs; argnum++)
+ {
+ type = VALUE_TYPE (args[argnum]);
+ len = TYPE_LENGTH (type);
+ val = (char *) VALUE_CONTENTS (args[argnum]);
+
+ if (len <= REGISTER_SIZE && argreg <= ARG4_REGNUM)
+ {
+ /* Data fits in a register; put it in the first available
+ register. */
+ write_register (argreg, *(unsigned long *) val);
+ argreg++;
+ }
+ else if (len > REGISTER_SIZE && argreg <= ARG4_REGNUM)
+ {
+ /* Data does not fit in register; pass it on the stack and
+ put its address in the first available register. */
+ write_memory (fp_data, val, len);
+ write_register (argreg, fp_data);
+ fp_data += len;
+ argreg++;
+ }
+ else if (len > REGISTER_SIZE)
+ {
+ /* Data does not fit in register; put both data and
+ parameter on the stack. */
+ write_memory (fp_data, val, len);
+ write_memory (fp_params, (char *) (&fp_data), REGISTER_SIZE);
+ fp_data += len;
+ fp_params += REGISTER_SIZE;
+ }
+ else
+ {
+ /* Data fits in a register, but we are out of registers;
+ put the parameter on the stack. */
+ write_memory (fp_params, val, REGISTER_SIZE);
+ fp_params += REGISTER_SIZE;
+ }
+ }
+
+ return sp;
+}
+
+CORE_ADDR
+cris_abi_v2_push_arguments (int nargs, struct value **args, CORE_ADDR sp,
+ int struct_return, CORE_ADDR struct_addr)
+{
+ int stack_alloc;
+ int stack_offset;
+ int argreg;
+ int argnum;
+
+ CORE_ADDR regval;
+
+ /* The function's arguments and memory allocated by gdb for the arguments to
+ point at reside in separate areas on the stack.
+ Both frame pointers grow toward higher addresses. */
+ CORE_ADDR fp_arg;
+ CORE_ADDR fp_mem;
+
+ /* Are we returning a value using a structure return or a normal value
+ return? struct_addr is the address of the reserved space for the return
+ structure to be written on the stack. */
+ if (struct_return)
+ {
+ write_register (STR_REGNUM, struct_addr);
+ }
+
+ /* Allocate enough to keep things word-aligned on both parts of the
+ stack. */
+ stack_alloc = 0;
+ for (argnum = 0; argnum < nargs; argnum++)
+ {
+ int len;
+ int reg_demand;
+
+ len = TYPE_LENGTH (VALUE_TYPE (args[argnum]));
+ reg_demand = (len / REGISTER_SIZE) + (len % REGISTER_SIZE != 0 ? 1 : 0);
+
+ /* reg_demand * REGISTER_SIZE is the amount of memory we might need to
+ allocate for this argument. 2 * REGISTER_SIZE is the amount of stack
+ space we might need to pass the argument itself (either by value or by
+ reference). */
+ stack_alloc += (reg_demand * REGISTER_SIZE + 2 * REGISTER_SIZE);
+ }
+ sp -= stack_alloc;
+ /* We may over-allocate a little here, but that won't hurt anything. */
+
+ /* Initialize frame pointers. */
+ fp_arg = sp;
+ fp_mem = sp + (nargs * (2 * REGISTER_SIZE));
+
+ /* Now load as many as possible of the first arguments into registers,
+ and push the rest onto the stack. */
+ argreg = ARG1_REGNUM;
+ stack_offset = 0;
+
+ for (argnum = 0; argnum < nargs; argnum++)
+ {
+ int len;
+ char *val;
+ int reg_demand;
+ int i;
+
+ len = TYPE_LENGTH (VALUE_TYPE (args[argnum]));
+ val = (char *) VALUE_CONTENTS (args[argnum]);
+
+ /* How may registers worth of storage do we need for this argument? */
+ reg_demand = (len / REGISTER_SIZE) + (len % REGISTER_SIZE != 0 ? 1 : 0);
+
+ if (len <= (2 * REGISTER_SIZE)
+ && (argreg + reg_demand - 1 <= ARG4_REGNUM))
+ {
+ /* Data passed by value. Fits in available register(s). */
+ for (i = 0; i < reg_demand; i++)
+ {
+ write_register (argreg, *(unsigned long *) val);
+ argreg++;
+ val += REGISTER_SIZE;
+ }
+ }
+ else if (len <= (2 * REGISTER_SIZE) && argreg <= ARG4_REGNUM)
+ {
+ /* Data passed by value. Does not fit in available register(s).
+ Use the register(s) first, then the stack. */
+ for (i = 0; i < reg_demand; i++)
+ {
+ if (argreg <= ARG4_REGNUM)
+ {
+ write_register (argreg, *(unsigned long *) val);
+ argreg++;
+ val += REGISTER_SIZE;
+ }
+ else
+ {
+ /* I guess this memory write could write the remaining data
+ all at once instead of in REGISTER_SIZE chunks. */
+ write_memory (fp_arg, val, REGISTER_SIZE);
+ fp_arg += REGISTER_SIZE;
+ val += REGISTER_SIZE;
+ }
+ }
+ }
+ else if (len > (2 * REGISTER_SIZE))
+ {
+ /* Data passed by reference. Put it on the stack. */
+ write_memory (fp_mem, val, len);
+ write_memory (fp_arg, (char *) (&fp_mem), REGISTER_SIZE);
+
+ /* fp_mem need not be word-aligned since it's just a chunk of
+ memory being pointed at. That is, += len would do. */
+ fp_mem += reg_demand * REGISTER_SIZE;
+ fp_arg += REGISTER_SIZE;
+ }
+ else
+ {
+ /* Data passed by value. No available registers. Put it on
+ the stack. */
+ write_memory (fp_arg, val, len);
+
+ /* fp_arg must be word-aligned (i.e., don't += len) to match
+ the function prologue. */
+ fp_arg += reg_demand * REGISTER_SIZE;
+ }
+ }
+
+ return sp;
+}
+
+/* Never put the return address on the stack. The register SRP is pushed
+ by the called function unless it is a leaf-function. Due to the BRP
+ register the PC will change when continue is sent. */
+
+CORE_ADDR
+cris_push_return_address (CORE_ADDR pc, CORE_ADDR sp)
+{
+ write_register (SRP_REGNUM, CALL_DUMMY_ADDRESS ());
+ return sp;
+}
+
+/* Restore the machine to the state it had before the current frame
+ was created. Discard the innermost frame from the stack and restore
+ all saved registers. */
+
+void
+cris_pop_frame ()
+{
+ register struct frame_info *fi = get_current_frame ();
+ register int regno;
+ register int stack_offset = 0;
+
+ if (PC_IN_CALL_DUMMY (fi->pc, fi->frame, fi->frame))
+ {
+ /* This happens when we hit a breakpoint set at the entry point,
+ when returning from a dummy frame. */
+ generic_pop_dummy_frame ();
+ }
+ else
+ {
+ cris_frame_init_saved_regs (fi);
+
+ /* For each register, the address of where it was saved on entry to
+ the frame now lies in fi->saved_regs[regno], or zero if it was not
+ saved. This includes special registers such as PC and FP saved in
+ special ways in the stack frame. The SP_REGNUM is even more
+ special, the address here is the SP for the next frame, not the
+ address where the SP was saved. */
+
+ /* Restore general registers R0 - R7. They were pushed on the stack
+ after SP was saved. */
+ for (regno = 0; regno < FP_REGNUM; regno++)
+ {
+ if (fi->saved_regs[regno])
+ {
+ write_register (regno,
+ read_memory_integer (fi->saved_regs[regno], 4));
+ }
+ }
+
+ if (fi->saved_regs[FP_REGNUM])
+ {
+ /* Pop the frame pointer (R8). It was pushed before SP
+ was saved. */
+ write_register (FP_REGNUM,
+ read_memory_integer (fi->saved_regs[FP_REGNUM], 4));
+ stack_offset += 4;
+
+ /* Not a leaf function. */
+ if (fi->saved_regs[SRP_REGNUM])
+ {
+ /* SRP was pushed before SP was saved. */
+ stack_offset += 4;
+ }
+
+ /* Restore the SP and adjust for R8 and (possibly) SRP. */
+ write_register (SP_REGNUM, fi->saved_regs[FP_REGNUM] + stack_offset);
+ }
+ else
+ {
+ /* Currently, we can't get the correct info into fi->saved_regs
+ without a frame pointer. */
+ }
+
+ /* Restore the PC. */
+ write_register (PC_REGNUM, fi->extra_info->return_pc);
+ }
+ flush_cached_frames ();
+}
+
+/* Calculates a value that measures how good inst_args constraints an
+ instruction. It stems from cris_constraint, found in cris-dis.c. */
+
+static int
+constraint (unsigned int insn, const signed char *inst_args,
+ inst_env_type *inst_env)
+{
+ int retval = 0;
+ int tmp, i;
+
+ const char *s = inst_args;
+
+ for (; *s; s++)
+ switch (*s)
+ {
+ case 'm':
+ if ((insn & 0x30) == 0x30)
+ return -1;
+ break;
+
+ case 'S':
+ /* A prefix operand. */
+ if (inst_env->prefix_found)
+ break;
+ else
+ return -1;
+
+ case 'B':
+ /* A "push" prefix. (This check was REMOVED by san 970921.) Check for
+ valid "push" size. In case of special register, it may be != 4. */
+ if (inst_env->prefix_found)
+ break;
+ else
+ return -1;
+
+ case 'D':
+ retval = (((insn >> 0xC) & 0xF) == (insn & 0xF));
+ if (!retval)
+ return -1;
+ else
+ retval += 4;
+ break;
+
+ case 'P':
+ tmp = (insn >> 0xC) & 0xF;
+ for (i = 0; i < NUM_SPECREGS; i++)
+ /* Since we match four bits, we will give a value of
+ 4 - 1 = 3 in a match. If there is a corresponding
+ exact match of a special register in another pattern, it
+ will get a value of 4, which will be higher. This should
+ be correct in that an exact pattern would match better that
+ a general pattern.
+ Note that there is a reason for not returning zero; the
+ pattern for "clear" is partly matched in the bit-pattern
+ (the two lower bits must be zero), while the bit-pattern
+ for a move from a special register is matched in the
+ register constraint.
+ This also means we will will have a race condition if
+ there is a partly match in three bits in the bit pattern. */
+ if (tmp == cris_spec_regs[i].number)
+ {
+ retval += 3;
+ break;
+ }
+ if (i == NUM_SPECREGS)
+ return -1;
+ break;
+ }
+ return retval;
+}
+
+/* Returns the number of bits set in the variable value. */
+
+static int
+number_of_bits (unsigned int value)
+{
+ int number_of_bits = 0;
+
+ while (value != 0)
+ {
+ number_of_bits += 1;
+ value &= (value - 1);
+ }
+ return number_of_bits;
+}
+
+/* Finds the address that should contain the single step breakpoint(s).
+ It stems from code in cris-dis.c. */
+
+static int
+find_cris_op (unsigned short insn, inst_env_type *inst_env)
+{
+ int i;
+ int max_level_of_match = -1;
+ int max_matched = -1;
+ int level_of_match;
+
+ for (i = 0; cris_opcodes[i].name != NULL; i++)
+ {
+ if (((cris_opcodes[i].match & insn) == cris_opcodes[i].match)
+ && ((cris_opcodes[i].lose & insn) == 0))
+ {
+ level_of_match = constraint (insn, cris_opcodes[i].args, inst_env);
+ if (level_of_match >= 0)
+ {
+ level_of_match +=
+ number_of_bits (cris_opcodes[i].match | cris_opcodes[i].lose);
+ if (level_of_match > max_level_of_match)
+ {
+ max_matched = i;
+ max_level_of_match = level_of_match;
+ if (level_of_match == 16)
+ {
+ /* All bits matched, cannot find better. */
+ break;
+ }
+ }
+ }
+ }
+ }
+ return max_matched;
+}
+
+/* Attempts to find single-step breakpoints. Returns -1 on failure which is
+ actually an internal error. */
+
+static int
+find_step_target (inst_env_type *inst_env)
+{
+ int i;
+ int offset;
+ unsigned short insn;
+
+ /* Create a local register image and set the initial state. */
+ for (i = 0; i < NUM_GENREGS; i++)
+ {
+ inst_env->reg[i] = (unsigned long) read_register (i);
+ }
+ offset = NUM_GENREGS;
+ for (i = 0; i < NUM_SPECREGS; i++)
+ {
+ inst_env->preg[i] = (unsigned long) read_register (offset + i);
+ }
+ inst_env->branch_found = 0;
+ inst_env->slot_needed = 0;
+ inst_env->delay_slot_pc_active = 0;
+ inst_env->prefix_found = 0;
+ inst_env->invalid = 0;
+ inst_env->xflag_found = 0;
+ inst_env->disable_interrupt = 0;
+
+ /* Look for a step target. */
+ do
+ {
+ /* Read an instruction from the client. */
+ insn = read_memory_unsigned_integer (inst_env->reg[PC_REGNUM], 2);
+
+ /* If the instruction is not in a delay slot the new content of the
+ PC is [PC] + 2. If the instruction is in a delay slot it is not
+ that simple. Since a instruction in a delay slot cannot change
+ the content of the PC, it does not matter what value PC will have.
+ Just make sure it is a valid instruction. */
+ if (!inst_env->delay_slot_pc_active)
+ {
+ inst_env->reg[PC_REGNUM] += 2;
+ }
+ else
+ {
+ inst_env->delay_slot_pc_active = 0;
+ inst_env->reg[PC_REGNUM] = inst_env->delay_slot_pc;
+ }
+ /* Analyse the present instruction. */
+ i = find_cris_op (insn, inst_env);
+ if (i == -1)
+ {
+ inst_env->invalid = 1;
+ }
+ else
+ {
+ cris_gdb_func (cris_opcodes[i].op, insn, inst_env);
+ }
+ } while (!inst_env->invalid
+ && (inst_env->prefix_found || inst_env->xflag_found
+ || inst_env->slot_needed));
+ return i;
+}
+
+/* There is no hardware single-step support. The function find_step_target
+ digs through the opcodes in order to find all possible targets.
+ Either one ordinary target or two targets for branches may be found. */
+
+void
+cris_software_single_step (enum target_signal ignore, int insert_breakpoints)
+{
+ inst_env_type inst_env;
+
+ if (insert_breakpoints)
+ {
+ /* Analyse the present instruction environment and insert
+ breakpoints. */
+ int status = find_step_target (&inst_env);
+ if (status == -1)
+ {
+ /* Could not find a target. FIXME: Should do something. */
+ }
+ else
+ {
+ /* Insert at most two breakpoints. One for the next PC content
+ and possibly another one for a branch, jump, etc. */
+ next_pc = (CORE_ADDR) inst_env.reg[PC_REGNUM];
+ target_insert_breakpoint (next_pc, break_mem[0]);
+ if (inst_env.branch_found
+ && (CORE_ADDR) inst_env.branch_break_address != next_pc)
+ {
+ branch_target_address =
+ (CORE_ADDR) inst_env.branch_break_address;
+ target_insert_breakpoint (branch_target_address, break_mem[1]);
+ branch_break_inserted = 1;
+ }
+ }
+ }
+ else
+ {
+ /* Remove breakpoints. */
+ target_remove_breakpoint (next_pc, break_mem[0]);
+ if (branch_break_inserted)
+ {
+ target_remove_breakpoint (branch_target_address, break_mem[1]);
+ branch_break_inserted = 0;
+ }
+ }
+}
+
+/* Calculates the prefix value for quick offset addressing mode. */
+
+void
+quick_mode_bdap_prefix (unsigned short inst, inst_env_type *inst_env)
+{
+ /* It's invalid to be in a delay slot. You can't have a prefix to this
+ instruction (not 100% sure). */
+ if (inst_env->slot_needed || inst_env->prefix_found)
+ {
+ inst_env->invalid = 1;
+ return;
+ }
+
+ inst_env->prefix_value = inst_env->reg[cris_get_operand2 (inst)];
+ inst_env->prefix_value += cris_get_bdap_quick_offset (inst);
+
+ /* A prefix doesn't change the xflag_found. But the rest of the flags
+ need updating. */
+ inst_env->slot_needed = 0;
+ inst_env->prefix_found = 1;
+}
+
+/* Updates the autoincrement register. The size of the increment is derived
+ from the size of the operation. The PC is always kept aligned on even
+ word addresses. */
+
+void
+process_autoincrement (int size, unsigned short inst, inst_env_type *inst_env)
+{
+ if (size == INST_BYTE_SIZE)
+ {
+ inst_env->reg[cris_get_operand1 (inst)] += 1;
+
+ /* The PC must be word aligned, so increase the PC with one
+ word even if the size is byte. */
+ if (cris_get_operand1 (inst) == REG_PC)
+ {
+ inst_env->reg[REG_PC] += 1;
+ }
+ }
+ else if (size == INST_WORD_SIZE)
+ {
+ inst_env->reg[cris_get_operand1 (inst)] += 2;
+ }
+ else if (size == INST_DWORD_SIZE)
+ {
+ inst_env->reg[cris_get_operand1 (inst)] += 4;
+ }
+ else
+ {
+ /* Invalid size. */
+ inst_env->invalid = 1;
+ }
+}
+
+/* Calculates the prefix value for the general case of offset addressing
+ mode. */
+
+void
+bdap_prefix (unsigned short inst, inst_env_type *inst_env)
+{
+
+ long offset;
+
+ /* It's invalid to be in a delay slot. */
+ if (inst_env->slot_needed || inst_env->prefix_found)
+ {
+ inst_env->invalid = 1;
+ return;
+ }
+
+ if (cris_get_mode (inst) == AUTOINC_MODE)
+ {
+ process_autoincrement (cris_get_size (inst), inst, inst_env);
+ }
+
+ inst_env->prefix_value = inst_env->reg[cris_get_operand2 (inst)];
+
+ /* The offset is an indirection of the contents of the operand1 register. */
+ inst_env->prefix_value +=
+ read_memory_integer (inst_env->reg[cris_get_operand1 (inst)], cris_get_size (inst));
+
+ /* A prefix doesn't change the xflag_found. But the rest of the flags
+ need updating. */
+ inst_env->slot_needed = 0;
+ inst_env->prefix_found = 1;
+}
+
+/* Calculates the prefix value for the index addressing mode. */
+
+void
+biap_prefix (unsigned short inst, inst_env_type *inst_env)
+{
+ /* It's invalid to be in a delay slot. I can't see that it's possible to
+ have a prefix to this instruction. So I will treat this as invalid. */
+ if (inst_env->slot_needed || inst_env->prefix_found)
+ {
+ inst_env->invalid = 1;
+ return;
+ }
+
+ inst_env->prefix_value = inst_env->reg[cris_get_operand1 (inst)];
+
+ /* The offset is the operand2 value shifted the size of the instruction
+ to the left. */
+ inst_env->prefix_value +=
+ inst_env->reg[cris_get_operand2 (inst)] << cris_get_size (inst);
+
+ /* If the PC is operand1 (base) the address used is the address after
+ the main instruction, i.e. address + 2 (the PC is already compensated
+ for the prefix operation). */
+ if (cris_get_operand1 (inst) == REG_PC)
+ {
+ inst_env->prefix_value += 2;
+ }
+
+ /* A prefix doesn't change the xflag_found. But the rest of the flags
+ need updating. */
+ inst_env->slot_needed = 0;
+ inst_env->xflag_found = 0;
+ inst_env->prefix_found = 1;
+}
+
+/* Calculates the prefix value for the double indirect addressing mode. */
+
+void
+dip_prefix (unsigned short inst, inst_env_type *inst_env)
+{
+
+ CORE_ADDR address;
+
+ /* It's invalid to be in a delay slot. */
+ if (inst_env->slot_needed || inst_env->prefix_found)
+ {
+ inst_env->invalid = 1;
+ return;
+ }
+
+ /* The prefix value is one dereference of the contents of the operand1
+ register. */
+ address = (CORE_ADDR) inst_env->reg[cris_get_operand1 (inst)];
+ inst_env->prefix_value = read_memory_unsigned_integer (address, 4);
+
+ /* Check if the mode is autoincrement. */
+ if (cris_get_mode (inst) == AUTOINC_MODE)
+ {
+ inst_env->reg[cris_get_operand1 (inst)] += 4;
+ }
+
+ /* A prefix doesn't change the xflag_found. But the rest of the flags
+ need updating. */
+ inst_env->slot_needed = 0;
+ inst_env->xflag_found = 0;
+ inst_env->prefix_found = 1;
+}
+
+/* Finds the destination for a branch with 8-bits offset. */
+
+void
+eight_bit_offset_branch_op (unsigned short inst, inst_env_type *inst_env)
+{
+
+ short offset;
+
+ /* If we have a prefix or are in a delay slot it's bad. */
+ if (inst_env->slot_needed || inst_env->prefix_found)
+ {
+ inst_env->invalid = 1;
+ return;
+ }
+
+ /* We have a branch, find out where the branch will land. */
+ offset = cris_get_branch_short_offset (inst);
+
+ /* Check if the offset is signed. */
+ if (offset & BRANCH_SIGNED_SHORT_OFFSET_MASK)
+ {
+ offset |= 0xFF00;
+ }
+
+ /* The offset ends with the sign bit, set it to zero. The address
+ should always be word aligned. */
+ offset &= ~BRANCH_SIGNED_SHORT_OFFSET_MASK;
+
+ inst_env->branch_found = 1;
+ inst_env->branch_break_address = inst_env->reg[REG_PC] + offset;
+
+ inst_env->slot_needed = 1;
+ inst_env->prefix_found = 0;
+ inst_env->xflag_found = 0;
+ inst_env->disable_interrupt = 1;
+}
+
+/* Finds the destination for a branch with 16-bits offset. */
+
+void
+sixteen_bit_offset_branch_op (unsigned short inst, inst_env_type *inst_env)
+{
+ short offset;
+
+ /* If we have a prefix or is in a delay slot it's bad. */
+ if (inst_env->slot_needed || inst_env->prefix_found)
+ {
+ inst_env->invalid = 1;
+ return;
+ }
+
+ /* We have a branch, find out the offset for the branch. */
+ offset = read_memory_integer (inst_env->reg[REG_PC], 2);
+
+ /* The instruction is one word longer than normal, so add one word
+ to the PC. */
+ inst_env->reg[REG_PC] += 2;
+
+ inst_env->branch_found = 1;
+ inst_env->branch_break_address = inst_env->reg[REG_PC] + offset;
+
+
+ inst_env->slot_needed = 1;
+ inst_env->prefix_found = 0;
+ inst_env->xflag_found = 0;
+ inst_env->disable_interrupt = 1;
+}
+
+/* Handles the ABS instruction. */
+
+void
+abs_op (unsigned short inst, inst_env_type *inst_env)
+{
+
+ long value;
+
+ /* ABS can't have a prefix, so it's bad if it does. */
+ if (inst_env->prefix_found)
+ {
+ inst_env->invalid = 1;
+ return;
+ }
+
+ /* Check if the operation affects the PC. */
+ if (cris_get_operand2 (inst) == REG_PC)
+ {
+
+ /* It's invalid to change to the PC if we are in a delay slot. */
+ if (inst_env->slot_needed)
+ {
+ inst_env->invalid = 1;
+ return;
+ }
+
+ value = (long) inst_env->reg[REG_PC];
+
+ /* The value of abs (SIGNED_DWORD_MASK) is SIGNED_DWORD_MASK. */
+ if (value != SIGNED_DWORD_MASK)
+ {
+ value = -value;
+ inst_env->reg[REG_PC] = (long) value;
+ }
+ }
+
+ inst_env->slot_needed = 0;
+ inst_env->prefix_found = 0;
+ inst_env->xflag_found = 0;
+ inst_env->disable_interrupt = 0;
+}
+
+/* Handles the ADDI instruction. */
+
+void
+addi_op (unsigned short inst, inst_env_type *inst_env)
+{
+ /* It's invalid to have the PC as base register. And ADDI can't have
+ a prefix. */
+ if (inst_env->prefix_found || (cris_get_operand1 (inst) == REG_PC))
+ {
+ inst_env->invalid = 1;
+ return;
+ }
+
+ inst_env->slot_needed = 0;
+ inst_env->prefix_found = 0;
+ inst_env->xflag_found = 0;
+ inst_env->disable_interrupt = 0;
+}
+
+/* Handles the ASR instruction. */
+
+void
+asr_op (unsigned short inst, inst_env_type *inst_env)
+{
+ int shift_steps;
+ unsigned long value;
+ unsigned long signed_extend_mask = 0;
+
+ /* ASR can't have a prefix, so check that it doesn't. */
+ if (inst_env->prefix_found)
+ {
+ inst_env->invalid = 1;
+ return;
+ }
+
+ /* Check if the PC is the target register. */
+ if (cris_get_operand2 (inst) == REG_PC)
+ {
+ /* It's invalid to change the PC in a delay slot. */
+ if (inst_env->slot_needed)
+ {
+ inst_env->invalid = 1;
+ return;
+ }
+ /* Get the number of bits to shift. */
+ shift_steps = cris_get_asr_shift_steps (inst_env->reg[cris_get_operand1 (inst)]);
+ value = inst_env->reg[REG_PC];
+
+ /* Find out how many bits the operation should apply to. */
+ if (cris_get_size (inst) == INST_BYTE_SIZE)
+ {
+ if (value & SIGNED_BYTE_MASK)
+ {
+ signed_extend_mask = 0xFF;
+ signed_extend_mask = signed_extend_mask >> shift_steps;
+ signed_extend_mask = ~signed_extend_mask;
+ }
+ value = value >> shift_steps;
+ value |= signed_extend_mask;
+ value &= 0xFF;
+ inst_env->reg[REG_PC] &= 0xFFFFFF00;
+ inst_env->reg[REG_PC] |= value;
+ }
+ else if (cris_get_size (inst) == INST_WORD_SIZE)
+ {
+ if (value & SIGNED_WORD_MASK)
+ {
+ signed_extend_mask = 0xFFFF;
+ signed_extend_mask = signed_extend_mask >> shift_steps;
+ signed_extend_mask = ~signed_extend_mask;
+ }
+ value = value >> shift_steps;
+ value |= signed_extend_mask;
+ value &= 0xFFFF;
+ inst_env->reg[REG_PC] &= 0xFFFF0000;
+ inst_env->reg[REG_PC] |= value;
+ }
+ else if (cris_get_size (inst) == INST_DWORD_SIZE)
+ {
+ if (value & SIGNED_DWORD_MASK)
+ {
+ signed_extend_mask = 0xFFFFFFFF;
+ signed_extend_mask = signed_extend_mask >> shift_steps;
+ signed_extend_mask = ~signed_extend_mask;
+ }
+ value = value >> shift_steps;
+ value |= signed_extend_mask;
+ inst_env->reg[REG_PC] = value;
+ }
+ }
+ inst_env->slot_needed = 0;
+ inst_env->prefix_found = 0;
+ inst_env->xflag_found = 0;
+ inst_env->disable_interrupt = 0;
+}
+
+/* Handles the ASRQ instruction. */
+
+void
+asrq_op (unsigned short inst, inst_env_type *inst_env)
+{
+
+ int shift_steps;
+ unsigned long value;
+ unsigned long signed_extend_mask = 0;
+
+ /* ASRQ can't have a prefix, so check that it doesn't. */
+ if (inst_env->prefix_found)
+ {
+ inst_env->invalid = 1;
+ return;
+ }
+
+ /* Check if the PC is the target register. */
+ if (cris_get_operand2 (inst) == REG_PC)
+ {
+
+ /* It's invalid to change the PC in a delay slot. */
+ if (inst_env->slot_needed)
+ {
+ inst_env->invalid = 1;
+ return;
+ }
+ /* The shift size is given as a 5 bit quick value, i.e. we don't
+ want the the sign bit of the quick value. */
+ shift_steps = cris_get_asr_shift_steps (inst);
+ value = inst_env->reg[REG_PC];
+ if (value & SIGNED_DWORD_MASK)
+ {
+ signed_extend_mask = 0xFFFFFFFF;
+ signed_extend_mask = signed_extend_mask >> shift_steps;
+ signed_extend_mask = ~signed_extend_mask;
+ }
+ value = value >> shift_steps;
+ value |= signed_extend_mask;
+ inst_env->reg[REG_PC] = value;
+ }
+ inst_env->slot_needed = 0;
+ inst_env->prefix_found = 0;
+ inst_env->xflag_found = 0;
+ inst_env->disable_interrupt = 0;
+}
+
+/* Handles the AX, EI and SETF instruction. */
+
+void
+ax_ei_setf_op (unsigned short inst, inst_env_type *inst_env)
+{
+ if (inst_env->prefix_found)
+ {
+ inst_env->invalid = 1;
+ return;
+ }
+ /* Check if the instruction is setting the X flag. */
+ if (cris_is_xflag_bit_on (inst))
+ {
+ inst_env->xflag_found = 1;
+ }
+ else
+ {
+ inst_env->xflag_found = 0;
+ }
+ inst_env->slot_needed = 0;
+ inst_env->prefix_found = 0;
+ inst_env->disable_interrupt = 1;
+}
+
+/* Checks if the instruction is in assign mode. If so, it updates the assign
+ register. Note that check_assign assumes that the caller has checked that
+ there is a prefix to this instruction. The mode check depends on this. */
+
+void
+check_assign (unsigned short inst, inst_env_type *inst_env)
+{
+ /* Check if it's an assign addressing mode. */
+ if (cris_get_mode (inst) == PREFIX_ASSIGN_MODE)
+ {
+ /* Assign the prefix value to operand 1. */
+ inst_env->reg[cris_get_operand1 (inst)] = inst_env->prefix_value;
+ }
+}
+
+/* Handles the 2-operand BOUND instruction. */
+
+void
+two_operand_bound_op (unsigned short inst, inst_env_type *inst_env)
+{
+ /* It's invalid to have the PC as the index operand. */
+ if (cris_get_operand2 (inst) == REG_PC)
+ {
+ inst_env->invalid = 1;
+ return;
+ }
+ /* Check if we have a prefix. */
+ if (inst_env->prefix_found)
+ {
+ check_assign (inst, inst_env);
+ }
+ /* Check if this is an autoincrement mode. */
+ else if (cris_get_mode (inst) == AUTOINC_MODE)
+ {
+ /* It's invalid to change the PC in a delay slot. */
+ if (inst_env->slot_needed)
+ {
+ inst_env->invalid = 1;
+ return;
+ }
+ process_autoincrement (cris_get_size (inst), inst, inst_env);
+ }
+ inst_env->slot_needed = 0;
+ inst_env->prefix_found = 0;
+ inst_env->xflag_found = 0;
+ inst_env->disable_interrupt = 0;
+}
+
+/* Handles the 3-operand BOUND instruction. */
+
+void
+three_operand_bound_op (unsigned short inst, inst_env_type *inst_env)
+{
+ /* It's an error if we haven't got a prefix. And it's also an error
+ if the PC is the destination register. */
+ if ((!inst_env->prefix_found) || (cris_get_operand1 (inst) == REG_PC))
+ {
+ inst_env->invalid = 1;
+ return;
+ }
+ inst_env->slot_needed = 0;
+ inst_env->prefix_found = 0;
+ inst_env->xflag_found = 0;
+ inst_env->disable_interrupt = 0;
+}
+
+/* Clears the status flags in inst_env. */
+
+void
+btst_nop_op (unsigned short inst, inst_env_type *inst_env)
+{
+ /* It's an error if we have got a prefix. */
+ if (inst_env->prefix_found)
+ {
+ inst_env->invalid = 1;
+ return;
+ }
+
+ inst_env->slot_needed = 0;
+ inst_env->prefix_found = 0;
+ inst_env->xflag_found = 0;
+ inst_env->disable_interrupt = 0;
+}
+
+/* Clears the status flags in inst_env. */
+
+void
+clearf_di_op (unsigned short inst, inst_env_type *inst_env)
+{
+ /* It's an error if we have got a prefix. */
+ if (inst_env->prefix_found)
+ {
+ inst_env->invalid = 1;
+ return;
+ }
+
+ inst_env->slot_needed = 0;
+ inst_env->prefix_found = 0;
+ inst_env->xflag_found = 0;
+ inst_env->disable_interrupt = 1;
+}
+
+/* Handles the CLEAR instruction if it's in register mode. */
+
+void
+reg_mode_clear_op (unsigned short inst, inst_env_type *inst_env)
+{
+ /* Check if the target is the PC. */
+ if (cris_get_operand2 (inst) == REG_PC)
+ {
+ /* The instruction will clear the instruction's size bits. */
+ int clear_size = cris_get_clear_size (inst);
+ if (clear_size == INST_BYTE_SIZE)
+ {
+ inst_env->delay_slot_pc = inst_env->reg[REG_PC] & 0xFFFFFF00;
+ }
+ if (clear_size == INST_WORD_SIZE)
+ {
+ inst_env->delay_slot_pc = inst_env->reg[REG_PC] & 0xFFFF0000;
+ }
+ if (clear_size == INST_DWORD_SIZE)
+ {
+ inst_env->delay_slot_pc = 0x0;
+ }
+ /* The jump will be delayed with one delay slot. So we need a delay
+ slot. */
+ inst_env->slot_needed = 1;
+ inst_env->delay_slot_pc_active = 1;
+ }
+ else
+ {
+ /* The PC will not change => no delay slot. */
+ inst_env->slot_needed = 0;
+ }
+ inst_env->prefix_found = 0;
+ inst_env->xflag_found = 0;
+ inst_env->disable_interrupt = 0;
+}
+
+/* Handles the TEST instruction if it's in register mode. */
+
+void
+reg_mode_test_op (unsigned short inst, inst_env_type *inst_env)
+{
+ /* It's an error if we have got a prefix. */
+ if (inst_env->prefix_found)
+ {
+ inst_env->invalid = 1;
+ return;
+ }
+ inst_env->slot_needed = 0;
+ inst_env->prefix_found = 0;
+ inst_env->xflag_found = 0;
+ inst_env->disable_interrupt = 0;
+
+}
+
+/* Handles the CLEAR and TEST instruction if the instruction isn't
+ in register mode. */
+
+void
+none_reg_mode_clear_test_op (unsigned short inst, inst_env_type *inst_env)
+{
+ /* Check if we are in a prefix mode. */
+ if (inst_env->prefix_found)
+ {
+ /* The only way the PC can change is if this instruction is in
+ assign addressing mode. */
+ check_assign (inst, inst_env);
+ }
+ /* Indirect mode can't change the PC so just check if the mode is
+ autoincrement. */
+ else if (cris_get_mode (inst) == AUTOINC_MODE)
+ {
+ process_autoincrement (cris_get_size (inst), inst, inst_env);
+ }
+ inst_env->slot_needed = 0;
+ inst_env->prefix_found = 0;
+ inst_env->xflag_found = 0;
+ inst_env->disable_interrupt = 0;
+}
+
+/* Checks that the PC isn't the destination register or the instructions has
+ a prefix. */
+
+void
+dstep_logshift_mstep_neg_not_op (unsigned short inst, inst_env_type *inst_env)
+{
+ /* It's invalid to have the PC as the destination. The instruction can't
+ have a prefix. */
+ if ((cris_get_operand2 (inst) == REG_PC) || inst_env->prefix_found)
+ {
+ inst_env->invalid = 1;
+ return;
+ }
+
+ inst_env->slot_needed = 0;
+ inst_env->prefix_found = 0;
+ inst_env->xflag_found = 0;
+ inst_env->disable_interrupt = 0;
+}
+
+/* Checks that the instruction doesn't have a prefix. */
+
+void
+break_op (unsigned short inst, inst_env_type *inst_env)
+{
+ /* The instruction can't have a prefix. */
+ if (inst_env->prefix_found)
+ {
+ inst_env->invalid = 1;
+ return;
+ }
+
+ inst_env->slot_needed = 0;
+ inst_env->prefix_found = 0;
+ inst_env->xflag_found = 0;
+ inst_env->disable_interrupt = 1;
+}
+
+/* Checks that the PC isn't the destination register and that the instruction
+ doesn't have a prefix. */
+
+void
+scc_op (unsigned short inst, inst_env_type *inst_env)
+{
+ /* It's invalid to have the PC as the destination. The instruction can't
+ have a prefix. */
+ if ((cris_get_operand2 (inst) == REG_PC) || inst_env->prefix_found)
+ {
+ inst_env->invalid = 1;
+ return;
+ }
+
+ inst_env->slot_needed = 0;
+ inst_env->prefix_found = 0;
+ inst_env->xflag_found = 0;
+ inst_env->disable_interrupt = 1;
+}
+
+/* Handles the register mode JUMP instruction. */
+
+void
+reg_mode_jump_op (unsigned short inst, inst_env_type *inst_env)
+{
+ /* It's invalid to do a JUMP in a delay slot. The mode is register, so
+ you can't have a prefix. */
+ if ((inst_env->slot_needed) || (inst_env->prefix_found))
+ {
+ inst_env->invalid = 1;
+ return;
+ }
+
+ /* Just change the PC. */
+ inst_env->reg[REG_PC] = inst_env->reg[cris_get_operand1 (inst)];
+ inst_env->slot_needed = 0;
+ inst_env->prefix_found = 0;
+ inst_env->xflag_found = 0;
+ inst_env->disable_interrupt = 1;
+}
+
+/* Handles the JUMP instruction for all modes except register. */
+
+void none_reg_mode_jump_op (unsigned short inst, inst_env_type *inst_env)
+{
+ unsigned long newpc;
+ CORE_ADDR address;
+
+ /* It's invalid to do a JUMP in a delay slot. */
+ if (inst_env->slot_needed)
+ {
+ inst_env->invalid = 1;
+ }
+ else
+ {
+ /* Check if we have a prefix. */
+ if (inst_env->prefix_found)
+ {
+ check_assign (inst, inst_env);
+
+ /* Get the new value for the the PC. */
+ newpc =
+ read_memory_unsigned_integer ((CORE_ADDR) inst_env->prefix_value,
+ 4);
+ }
+ else
+ {
+ /* Get the new value for the PC. */
+ address = (CORE_ADDR) inst_env->reg[cris_get_operand1 (inst)];
+ newpc = read_memory_unsigned_integer (address, 4);
+
+ /* Check if we should increment a register. */
+ if (cris_get_mode (inst) == AUTOINC_MODE)
+ {
+ inst_env->reg[cris_get_operand1 (inst)] += 4;
+ }
+ }
+ inst_env->reg[REG_PC] = newpc;
+ }
+ inst_env->slot_needed = 0;
+ inst_env->prefix_found = 0;
+ inst_env->xflag_found = 0;
+ inst_env->disable_interrupt = 1;
+}
+
+/* Handles moves to special registers (aka P-register) for all modes. */
+
+void
+move_to_preg_op (unsigned short inst, inst_env_type *inst_env)
+{
+ if (inst_env->prefix_found)
+ {
+ /* The instruction has a prefix that means we are only interested if
+ the instruction is in assign mode. */
+ if (cris_get_mode (inst) == PREFIX_ASSIGN_MODE)
+ {
+ /* The prefix handles the problem if we are in a delay slot. */
+ if (cris_get_operand1 (inst) == REG_PC)
+ {
+ /* Just take care of the assign. */
+ check_assign (inst, inst_env);
+ }
+ }
+ }
+ else if (cris_get_mode (inst) == AUTOINC_MODE)
+ {
+ /* The instruction doesn't have a prefix, the only case left that we
+ are interested in is the autoincrement mode. */
+ if (cris_get_operand1 (inst) == REG_PC)
+ {
+ /* If the PC is to be incremented it's invalid to be in a
+ delay slot. */
+ if (inst_env->slot_needed)
+ {
+ inst_env->invalid = 1;
+ return;
+ }
+ /* The increment depends on the size of the special register.
+ Register P0 to P3 has the size byte, register P4 to P7 has the
+ size word and register P8 to P15 has the size dword. */
+ if (cris_get_operand2 (inst) < 4)
+ {
+ process_autoincrement (INST_BYTE_SIZE, inst, inst_env);
+ }
+ if (cris_get_operand2 (inst) < 8)
+ {
+ process_autoincrement (INST_WORD_SIZE, inst, inst_env);
+ }
+ else
+ {
+ process_autoincrement (INST_DWORD_SIZE, inst, inst_env);
+ }
+ }
+ }
+ inst_env->slot_needed = 0;
+ inst_env->prefix_found = 0;
+ inst_env->xflag_found = 0;
+ inst_env->disable_interrupt = 1;
+}
+
+/* Handles moves from special registers (aka P-register) for all modes
+ except register. */
+
+void
+none_reg_mode_move_from_preg_op (unsigned short inst, inst_env_type *inst_env)
+{
+ if (inst_env->prefix_found)
+ {
+ /* The instruction has a prefix that means we are only interested if
+ the instruction is in assign mode. */
+ if (cris_get_mode (inst) == PREFIX_ASSIGN_MODE)
+ {
+ /* The prefix handles the problem if we are in a delay slot. */
+ if (cris_get_operand1 (inst) == REG_PC)
+ {
+ /* Just take care of the assign. */
+ check_assign (inst, inst_env);
+ }
+ }
+ }
+ /* The instruction doesn't have a prefix, the only case left that we
+ are interested in is the autoincrement mode. */
+ else if (cris_get_mode (inst) == AUTOINC_MODE)
+ {
+ if (cris_get_operand1 (inst) == REG_PC)
+ {
+ /* If the PC is to be incremented it's invalid to be in a
+ delay slot. */
+ if (inst_env->slot_needed)
+ {
+ inst_env->invalid = 1;
+ return;
+ }
+ /* The increment depends on the size of the special register.
+ Register P0 to P3 has the size byte, register P4 to P7 has
+ the size word and register P8 to P15 has the size dword. */
+ if (cris_get_operand2 (inst) < 4)
+ {
+ process_autoincrement (INST_BYTE_SIZE, inst, inst_env);
+ }
+ if (cris_get_operand2 (inst) < 8)
+ {
+ process_autoincrement (INST_WORD_SIZE, inst, inst_env);
+ }
+ else
+ {
+ process_autoincrement (INST_DWORD_SIZE, inst, inst_env);
+ }
+ }
+ }
+ inst_env->slot_needed = 0;
+ inst_env->prefix_found = 0;
+ inst_env->xflag_found = 0;
+ inst_env->disable_interrupt = 1;
+}
+
+/* Handles moves from special registers (aka P-register) when the mode
+ is register. */
+
+void
+reg_mode_move_from_preg_op (unsigned short inst, inst_env_type *inst_env)
+{
+ /* Register mode move from special register can't have a prefix. */
+ if (inst_env->prefix_found)
+ {
+ inst_env->invalid = 1;
+ return;
+ }
+
+ if (cris_get_operand1 (inst) == REG_PC)
+ {
+ /* It's invalid to change the PC in a delay slot. */
+ if (inst_env->slot_needed)
+ {
+ inst_env->invalid = 1;
+ return;
+ }
+ /* The destination is the PC, the jump will have a delay slot. */
+ inst_env->delay_slot_pc = inst_env->preg[cris_get_operand2 (inst)];
+ inst_env->slot_needed = 1;
+ inst_env->delay_slot_pc_active = 1;
+ }
+ else
+ {
+ /* If the destination isn't PC, there will be no jump. */
+ inst_env->slot_needed = 0;
+ }
+ inst_env->prefix_found = 0;
+ inst_env->xflag_found = 0;
+ inst_env->disable_interrupt = 1;
+}
+
+/* Handles the MOVEM from memory to general register instruction. */
+
+void
+move_mem_to_reg_movem_op (unsigned short inst, inst_env_type *inst_env)
+{
+ if (inst_env->prefix_found)
+ {
+ /* The prefix handles the problem if we are in a delay slot. Is the
+ MOVEM instruction going to change the PC? */
+ if (cris_get_operand2 (inst) >= REG_PC)
+ {
+ inst_env->reg[REG_PC] =
+ read_memory_unsigned_integer (inst_env->prefix_value, 4);
+ }
+ /* The assign value is the value after the increment. Normally, the
+ assign value is the value before the increment. */
+ if ((cris_get_operand1 (inst) == REG_PC)
+ && (cris_get_mode (inst) == PREFIX_ASSIGN_MODE))
+ {
+ inst_env->reg[REG_PC] = inst_env->prefix_value;
+ inst_env->reg[REG_PC] += 4 * (cris_get_operand2 (inst) + 1);
+ }
+ }
+ else
+ {
+ /* Is the MOVEM instruction going to change the PC? */
+ if (cris_get_operand2 (inst) == REG_PC)
+ {
+ /* It's invalid to change the PC in a delay slot. */
+ if (inst_env->slot_needed)
+ {
+ inst_env->invalid = 1;
+ return;
+ }
+ inst_env->reg[REG_PC] =
+ read_memory_unsigned_integer (inst_env->reg[cris_get_operand1 (inst)],
+ 4);
+ }
+ /* The increment is not depending on the size, instead it's depending
+ on the number of registers loaded from memory. */
+ if ((cris_get_operand1 (inst) == REG_PC) && (cris_get_mode (inst) == AUTOINC_MODE))
+ {
+ /* It's invalid to change the PC in a delay slot. */
+ if (inst_env->slot_needed)
+ {
+ inst_env->invalid = 1;
+ return;
+ }
+ inst_env->reg[REG_PC] += 4 * (cris_get_operand2 (inst) + 1);
+ }
+ }
+ inst_env->slot_needed = 0;
+ inst_env->prefix_found = 0;
+ inst_env->xflag_found = 0;
+ inst_env->disable_interrupt = 0;
+}
+
+/* Handles the MOVEM to memory from general register instruction. */
+
+void
+move_reg_to_mem_movem_op (unsigned short inst, inst_env_type *inst_env)
+{
+ if (inst_env->prefix_found)
+ {
+ /* The assign value is the value after the increment. Normally, the
+ assign value is the value before the increment. */
+ if ((cris_get_operand1 (inst) == REG_PC) &&
+ (cris_get_mode (inst) == PREFIX_ASSIGN_MODE))
+ {
+ /* The prefix handles the problem if we are in a delay slot. */
+ inst_env->reg[REG_PC] = inst_env->prefix_value;
+ inst_env->reg[REG_PC] += 4 * (cris_get_operand2 (inst) + 1);
+ }
+ }
+ else
+ {
+ /* The increment is not depending on the size, instead it's depending
+ on the number of registers loaded to memory. */
+ if ((cris_get_operand1 (inst) == REG_PC) && (cris_get_mode (inst) == AUTOINC_MODE))
+ {
+ /* It's invalid to change the PC in a delay slot. */
+ if (inst_env->slot_needed)
+ {
+ inst_env->invalid = 1;
+ return;
+ }
+ inst_env->reg[REG_PC] += 4 * (cris_get_operand2 (inst) + 1);
+ }
+ }
+ inst_env->slot_needed = 0;
+ inst_env->prefix_found = 0;
+ inst_env->xflag_found = 0;
+ inst_env->disable_interrupt = 0;
+}
+
+/* Handles the pop instruction to a general register.
+ POP is a assembler macro for MOVE.D [SP+], Rd. */
+
+void
+reg_pop_op (unsigned short inst, inst_env_type *inst_env)
+{
+ /* POP can't have a prefix. */
+ if (inst_env->prefix_found)
+ {
+ inst_env->invalid = 1;
+ return;
+ }
+ if (cris_get_operand2 (inst) == REG_PC)
+ {
+ /* It's invalid to change the PC in a delay slot. */
+ if (inst_env->slot_needed)
+ {
+ inst_env->invalid = 1;
+ return;
+ }
+ inst_env->reg[REG_PC] =
+ read_memory_unsigned_integer (inst_env->reg[REG_SP], 4);
+ }
+ inst_env->slot_needed = 0;
+ inst_env->prefix_found = 0;
+ inst_env->xflag_found = 0;
+ inst_env->disable_interrupt = 0;
+}
+
+/* Handles moves from register to memory. */
+
+void
+move_reg_to_mem_index_inc_op (unsigned short inst, inst_env_type *inst_env)
+{
+ /* Check if we have a prefix. */
+ if (inst_env->prefix_found)
+ {
+ /* The only thing that can change the PC is an assign. */
+ check_assign (inst, inst_env);
+ }
+ else if ((cris_get_operand1 (inst) == REG_PC)
+ && (cris_get_mode (inst) == AUTOINC_MODE))
+ {
+ /* It's invalid to change the PC in a delay slot. */
+ if (inst_env->slot_needed)
+ {
+ inst_env->invalid = 1;
+ return;
+ }
+ process_autoincrement (cris_get_size (inst), inst, inst_env);
+ }
+ inst_env->slot_needed = 0;
+ inst_env->prefix_found = 0;
+ inst_env->xflag_found = 0;
+ inst_env->disable_interrupt = 0;
+}
+
+/* Handles the intructions that's not yet implemented, by setting
+ inst_env->invalid to true. */
+
+void
+not_implemented_op (unsigned short inst, inst_env_type *inst_env)
+{
+ inst_env->invalid = 1;
+}
+
+/* Handles the XOR instruction. */
+
+void
+xor_op (unsigned short inst, inst_env_type *inst_env)
+{
+ /* XOR can't have a prefix. */
+ if (inst_env->prefix_found)
+ {
+ inst_env->invalid = 1;
+ return;
+ }
+
+ /* Check if the PC is the target. */
+ if (cris_get_operand2 (inst) == REG_PC)
+ {
+ /* It's invalid to change the PC in a delay slot. */
+ if (inst_env->slot_needed)
+ {
+ inst_env->invalid = 1;
+ return;
+ }
+ inst_env->reg[REG_PC] ^= inst_env->reg[cris_get_operand1 (inst)];
+ }
+ inst_env->slot_needed = 0;
+ inst_env->prefix_found = 0;
+ inst_env->xflag_found = 0;
+ inst_env->disable_interrupt = 0;
+}
+
+/* Handles the MULS instruction. */
+
+void
+muls_op (unsigned short inst, inst_env_type *inst_env)
+{
+ /* MULS/U can't have a prefix. */
+ if (inst_env->prefix_found)
+ {
+ inst_env->invalid = 1;
+ return;
+ }
+
+ /* Consider it invalid if the PC is the target. */
+ if (cris_get_operand2 (inst) == REG_PC)
+ {
+ inst_env->invalid = 1;
+ return;
+ }
+ inst_env->slot_needed = 0;
+ inst_env->prefix_found = 0;
+ inst_env->xflag_found = 0;
+ inst_env->disable_interrupt = 0;
+}
+
+/* Handles the MULU instruction. */
+
+void
+mulu_op (unsigned short inst, inst_env_type *inst_env)
+{
+ /* MULS/U can't have a prefix. */
+ if (inst_env->prefix_found)
+ {
+ inst_env->invalid = 1;
+ return;
+ }
+
+ /* Consider it invalid if the PC is the target. */
+ if (cris_get_operand2 (inst) == REG_PC)
+ {
+ inst_env->invalid = 1;
+ return;
+ }
+ inst_env->slot_needed = 0;
+ inst_env->prefix_found = 0;
+ inst_env->xflag_found = 0;
+ inst_env->disable_interrupt = 0;
+}
+
+/* Calculate the result of the instruction for ADD, SUB, CMP AND, OR and MOVE.
+ The MOVE instruction is the move from source to register. */
+
+void
+add_sub_cmp_and_or_move_action (unsigned short inst, inst_env_type *inst_env,
+ unsigned long source1, unsigned long source2)
+{
+ unsigned long pc_mask;
+ unsigned long operation_mask;
+
+ /* Find out how many bits the operation should apply to. */
+ if (cris_get_size (inst) == INST_BYTE_SIZE)
+ {
+ pc_mask = 0xFFFFFF00;
+ operation_mask = 0xFF;
+ }
+ else if (cris_get_size (inst) == INST_WORD_SIZE)
+ {
+ pc_mask = 0xFFFF0000;
+ operation_mask = 0xFFFF;
+ }
+ else if (cris_get_size (inst) == INST_DWORD_SIZE)
+ {
+ pc_mask = 0x0;
+ operation_mask = 0xFFFFFFFF;
+ }
+ else
+ {
+ /* The size is out of range. */
+ inst_env->invalid = 1;
+ return;
+ }
+
+ /* The instruction just works on uw_operation_mask bits. */
+ source2 &= operation_mask;
+ source1 &= operation_mask;
+
+ /* Now calculate the result. The opcode's 3 first bits separates
+ the different actions. */
+ switch (cris_get_opcode (inst) & 7)
+ {
+ case 0: /* add */
+ source1 += source2;
+ break;
+
+ case 1: /* move */
+ source1 = source2;
+ break;
+
+ case 2: /* subtract */
+ source1 -= source2;
+ break;
+
+ case 3: /* compare */
+ break;
+
+ case 4: /* and */
+ source1 &= source2;
+ break;
+
+ case 5: /* or */
+ source1 |= source2;
+ break;
+
+ default:
+ inst_env->invalid = 1;
+ return;
+
+ break;
+ }
+
+ /* Make sure that the result doesn't contain more than the instruction
+ size bits. */
+ source2 &= operation_mask;
+
+ /* Calculate the new breakpoint address. */
+ inst_env->reg[REG_PC] &= pc_mask;
+ inst_env->reg[REG_PC] |= source1;
+
+}
+
+/* Extends the value from either byte or word size to a dword. If the mode
+ is zero extend then the value is extended with zero. If instead the mode
+ is signed extend the sign bit of the value is taken into consideration. */
+
+unsigned long
+do_sign_or_zero_extend (unsigned long value, unsigned short *inst)
+{
+ /* The size can be either byte or word, check which one it is.
+ Don't check the highest bit, it's indicating if it's a zero
+ or sign extend. */
+ if (cris_get_size (*inst) & INST_WORD_SIZE)
+ {
+ /* Word size. */
+ value &= 0xFFFF;
+
+ /* Check if the instruction is signed extend. If so, check if value has
+ the sign bit on. */
+ if (cris_is_signed_extend_bit_on (*inst) && (value & SIGNED_WORD_MASK))
+ {
+ value |= SIGNED_WORD_EXTEND_MASK;
+ }
+ }
+ else
+ {
+ /* Byte size. */
+ value &= 0xFF;
+
+ /* Check if the instruction is signed extend. If so, check if value has
+ the sign bit on. */
+ if (cris_is_signed_extend_bit_on (*inst) && (value & SIGNED_BYTE_MASK))
+ {
+ value |= SIGNED_BYTE_EXTEND_MASK;
+ }
+ }
+ /* The size should now be dword. */
+ cris_set_size_to_dword (inst);
+ return value;
+}
+
+/* Handles the register mode for the ADD, SUB, CMP, AND, OR and MOVE
+ instruction. The MOVE instruction is the move from source to register. */
+
+void
+reg_mode_add_sub_cmp_and_or_move_op (unsigned short inst,
+ inst_env_type *inst_env)
+{
+ unsigned long operand1;
+ unsigned long operand2;
+
+ /* It's invalid to have a prefix to the instruction. This is a register
+ mode instruction and can't have a prefix. */
+ if (inst_env->prefix_found)
+ {
+ inst_env->invalid = 1;
+ return;
+ }
+ /* Check if the instruction has PC as its target. */
+ if (cris_get_operand2 (inst) == REG_PC)
+ {
+ if (inst_env->slot_needed)
+ {
+ inst_env->invalid = 1;
+ return;
+ }
+ /* The instruction has the PC as its target register. */
+ operand1 = inst_env->reg[operand1];
+ operand2 = inst_env->reg[REG_PC];
+
+ /* Check if it's a extend, signed or zero instruction. */
+ if (cris_get_opcode (inst) < 4)
+ {
+ operand1 = do_sign_or_zero_extend (operand1, &inst);
+ }
+ /* Calculate the PC value after the instruction, i.e. where the
+ breakpoint should be. The order of the udw_operands is vital. */
+ add_sub_cmp_and_or_move_action (inst, inst_env, operand2, operand1);
+ }
+ inst_env->slot_needed = 0;
+ inst_env->prefix_found = 0;
+ inst_env->xflag_found = 0;
+ inst_env->disable_interrupt = 0;
+}
+
+/* Returns the data contained at address. The size of the data is derived from
+ the size of the operation. If the instruction is a zero or signed
+ extend instruction, the size field is changed in instruction. */
+
+unsigned long
+get_data_from_address (unsigned short *inst, CORE_ADDR address)
+{
+ int size = cris_get_size (*inst);
+ unsigned long value;
+
+ /* If it's an extend instruction we don't want the signed extend bit,
+ because it influences the size. */
+ if (cris_get_opcode (*inst) < 4)
+ {
+ size &= ~SIGNED_EXTEND_BIT_MASK;
+ }
+ /* Is there a need for checking the size? Size should contain the number of
+ bytes to read. */
+ size = 1 << size;
+ value = read_memory_unsigned_integer (address, size);
+
+ /* Check if it's an extend, signed or zero instruction. */
+ if (cris_get_opcode (*inst) < 4)
+ {
+ value = do_sign_or_zero_extend (value, inst);
+ }
+ return value;
+}
+
+/* Handles the assign addresing mode for the ADD, SUB, CMP, AND, OR and MOVE
+ instructions. The MOVE instruction is the move from source to register. */
+
+void
+handle_prefix_assign_mode_for_aritm_op (unsigned short inst,
+ inst_env_type *inst_env)
+{
+ unsigned long operand2;
+ unsigned long operand3;
+
+ check_assign (inst, inst_env);
+ if (cris_get_operand2 (inst) == REG_PC)
+ {
+ operand2 = inst_env->reg[REG_PC];
+
+ /* Get the value of the third operand. */
+ operand3 = get_data_from_address (&inst, inst_env->prefix_value);
+
+ /* Calculate the PC value after the instruction, i.e. where the
+ breakpoint should be. The order of the udw_operands is vital. */
+ add_sub_cmp_and_or_move_action (inst, inst_env, operand2, operand3);
+ }
+ inst_env->slot_needed = 0;
+ inst_env->prefix_found = 0;
+ inst_env->xflag_found = 0;
+ inst_env->disable_interrupt = 0;
+}
+
+/* Handles the three-operand addressing mode for the ADD, SUB, CMP, AND and
+ OR instructions. Note that for this to work as expected, the calling
+ function must have made sure that there is a prefix to this instruction. */
+
+void
+three_operand_add_sub_cmp_and_or_op (unsigned short inst,
+ inst_env_type *inst_env)
+{
+ unsigned long operand2;
+ unsigned long operand3;
+
+ if (cris_get_operand1 (inst) == REG_PC)
+ {
+ /* The PC will be changed by the instruction. */
+ operand2 = inst_env->reg[cris_get_operand2 (inst)];
+
+ /* Get the value of the third operand. */
+ operand3 = get_data_from_address (&inst, inst_env->prefix_value);
+
+ /* Calculate the PC value after the instruction, i.e. where the
+ breakpoint should be. */
+ add_sub_cmp_and_or_move_action (inst, inst_env, operand2, operand3);
+ }
+ inst_env->slot_needed = 0;
+ inst_env->prefix_found = 0;
+ inst_env->xflag_found = 0;
+ inst_env->disable_interrupt = 0;
+}
+
+/* Handles the index addresing mode for the ADD, SUB, CMP, AND, OR and MOVE
+ instructions. The MOVE instruction is the move from source to register. */
+
+void
+handle_prefix_index_mode_for_aritm_op (unsigned short inst,
+ inst_env_type *inst_env)
+{
+ if (cris_get_operand1 (inst) != cris_get_operand2 (inst))
+ {
+ /* If the instruction is MOVE it's invalid. If the instruction is ADD,
+ SUB, AND or OR something weird is going on (if everything works these
+ instructions should end up in the three operand version). */
+ inst_env->invalid = 1;
+ return;
+ }
+ else
+ {
+ /* three_operand_add_sub_cmp_and_or does the same as we should do here
+ so use it. */
+ three_operand_add_sub_cmp_and_or_op (inst, inst_env);
+ }
+ inst_env->slot_needed = 0;
+ inst_env->prefix_found = 0;
+ inst_env->xflag_found = 0;
+ inst_env->disable_interrupt = 0;
+}
+
+/* Handles the autoincrement and indirect addresing mode for the ADD, SUB,
+ CMP, AND OR and MOVE instruction. The MOVE instruction is the move from
+ source to register. */
+
+void
+handle_inc_and_index_mode_for_aritm_op (unsigned short inst,
+ inst_env_type *inst_env)
+{
+ unsigned long operand1;
+ unsigned long operand2;
+ unsigned long operand3;
+ int size;
+
+ /* The instruction is either an indirect or autoincrement addressing mode.
+ Check if the destination register is the PC. */
+ if (cris_get_operand2 (inst) == REG_PC)
+ {
+ /* Must be done here, get_data_from_address may change the size
+ field. */
+ size = cris_get_size (inst);
+ operand2 = inst_env->reg[REG_PC];
+
+ /* Get the value of the third operand, i.e. the indirect operand. */
+ operand1 = inst_env->reg[cris_get_operand1 (inst)];
+ operand3 = get_data_from_address (&inst, operand1);
+
+ /* Calculate the PC value after the instruction, i.e. where the
+ breakpoint should be. The order of the udw_operands is vital. */
+ add_sub_cmp_and_or_move_action (inst, inst_env, operand2, operand3);
+ }
+ /* If this is an autoincrement addressing mode, check if the increment
+ changes the PC. */
+ if ((cris_get_operand1 (inst) == REG_PC) && (cris_get_mode (inst) == AUTOINC_MODE))
+ {
+ /* Get the size field. */
+ size = cris_get_size (inst);
+
+ /* If it's an extend instruction we don't want the signed extend bit,
+ because it influences the size. */
+ if (cris_get_opcode (inst) < 4)
+ {
+ size &= ~SIGNED_EXTEND_BIT_MASK;
+ }
+ process_autoincrement (size, inst, inst_env);
+ }
+ inst_env->slot_needed = 0;
+ inst_env->prefix_found = 0;
+ inst_env->xflag_found = 0;
+ inst_env->disable_interrupt = 0;
+}
+
+/* Handles the two-operand addressing mode, all modes except register, for
+ the ADD, SUB CMP, AND and OR instruction. */
+
+void
+none_reg_mode_add_sub_cmp_and_or_move_op (unsigned short inst,
+ inst_env_type *inst_env)
+{
+ if (inst_env->prefix_found)
+ {
+ if (cris_get_mode (inst) == PREFIX_INDEX_MODE)
+ {
+ handle_prefix_index_mode_for_aritm_op (inst, inst_env);
+ }
+ else if (cris_get_mode (inst) == PREFIX_ASSIGN_MODE)
+ {
+ handle_prefix_assign_mode_for_aritm_op (inst, inst_env);
+ }
+ else
+ {
+ /* The mode is invalid for a prefixed base instruction. */
+ inst_env->invalid = 1;
+ return;
+ }
+ }
+ else
+ {
+ handle_inc_and_index_mode_for_aritm_op (inst, inst_env);
+ }
+}
+
+/* Handles the quick addressing mode for the ADD and SUB instruction. */
+
+void
+quick_mode_add_sub_op (unsigned short inst, inst_env_type *inst_env)
+{
+ unsigned long operand1;
+ unsigned long operand2;
+
+ /* It's a bad idea to be in a prefix instruction now. This is a quick mode
+ instruction and can't have a prefix. */
+ if (inst_env->prefix_found)
+ {
+ inst_env->invalid = 1;
+ return;
+ }
+
+ /* Check if the instruction has PC as its target. */
+ if (cris_get_operand2 (inst) == REG_PC)
+ {
+ if (inst_env->slot_needed)
+ {
+ inst_env->invalid = 1;
+ return;
+ }
+ operand1 = cris_get_quick_value (inst);
+ operand2 = inst_env->reg[REG_PC];
+
+ /* The size should now be dword. */
+ cris_set_size_to_dword (&inst);
+
+ /* Calculate the PC value after the instruction, i.e. where the
+ breakpoint should be. */
+ add_sub_cmp_and_or_move_action (inst, inst_env, operand2, operand1);
+ }
+ inst_env->slot_needed = 0;
+ inst_env->prefix_found = 0;
+ inst_env->xflag_found = 0;
+ inst_env->disable_interrupt = 0;
+}
+
+/* Handles the quick addressing mode for the CMP, AND and OR instruction. */
+
+void
+quick_mode_and_cmp_move_or_op (unsigned short inst, inst_env_type *inst_env)
+{
+ unsigned long operand1;
+ unsigned long operand2;
+
+ /* It's a bad idea to be in a prefix instruction now. This is a quick mode
+ instruction and can't have a prefix. */
+ if (inst_env->prefix_found)
+ {
+ inst_env->invalid = 1;
+ return;
+ }
+ /* Check if the instruction has PC as its target. */
+ if (cris_get_operand2 (inst) == REG_PC)
+ {
+ if (inst_env->slot_needed)
+ {
+ inst_env->invalid = 1;
+ return;
+ }
+ /* The instruction has the PC as its target register. */
+ operand1 = cris_get_quick_value (inst);
+ operand2 = inst_env->reg[REG_PC];
+
+ /* The quick value is signed, so check if we must do a signed extend. */
+ if (operand1 & SIGNED_QUICK_VALUE_MASK)
+ {
+ /* sign extend */
+ operand1 |= SIGNED_QUICK_VALUE_EXTEND_MASK;
+ }
+ /* The size should now be dword. */
+ cris_set_size_to_dword (&inst);
+
+ /* Calculate the PC value after the instruction, i.e. where the
+ breakpoint should be. */
+ add_sub_cmp_and_or_move_action (inst, inst_env, operand2, operand1);
+ }
+ inst_env->slot_needed = 0;
+ inst_env->prefix_found = 0;
+ inst_env->xflag_found = 0;
+ inst_env->disable_interrupt = 0;
+}
+
+/* Translate op_type to a function and call it. */
+
+static void cris_gdb_func (enum cris_op_type op_type, unsigned short inst,
+ inst_env_type *inst_env)
+{
+ switch (op_type)
+ {
+ case cris_not_implemented_op:
+ not_implemented_op (inst, inst_env);
+ break;
+
+ case cris_abs_op:
+ abs_op (inst, inst_env);
+ break;
+
+ case cris_addi_op:
+ addi_op (inst, inst_env);
+ break;
+
+ case cris_asr_op:
+ asr_op (inst, inst_env);
+ break;
+
+ case cris_asrq_op:
+ asrq_op (inst, inst_env);
+ break;
+
+ case cris_ax_ei_setf_op:
+ ax_ei_setf_op (inst, inst_env);
+ break;
+
+ case cris_bdap_prefix:
+ bdap_prefix (inst, inst_env);
+ break;
+
+ case cris_biap_prefix:
+ biap_prefix (inst, inst_env);
+ break;
+
+ case cris_break_op:
+ break_op (inst, inst_env);
+ break;
+
+ case cris_btst_nop_op:
+ btst_nop_op (inst, inst_env);
+ break;
+
+ case cris_clearf_di_op:
+ clearf_di_op (inst, inst_env);
+ break;
+
+ case cris_dip_prefix:
+ dip_prefix (inst, inst_env);
+ break;
+
+ case cris_dstep_logshift_mstep_neg_not_op:
+ dstep_logshift_mstep_neg_not_op (inst, inst_env);
+ break;
+
+ case cris_eight_bit_offset_branch_op:
+ eight_bit_offset_branch_op (inst, inst_env);
+ break;
+
+ case cris_move_mem_to_reg_movem_op:
+ move_mem_to_reg_movem_op (inst, inst_env);
+ break;
+
+ case cris_move_reg_to_mem_movem_op:
+ move_reg_to_mem_movem_op (inst, inst_env);
+ break;
+
+ case cris_move_to_preg_op:
+ move_to_preg_op (inst, inst_env);
+ break;
+
+ case cris_muls_op:
+ muls_op (inst, inst_env);
+ break;
+
+ case cris_mulu_op:
+ mulu_op (inst, inst_env);
+ break;
+
+ case cris_none_reg_mode_add_sub_cmp_and_or_move_op:
+ none_reg_mode_add_sub_cmp_and_or_move_op (inst, inst_env);
+ break;
+
+ case cris_none_reg_mode_clear_test_op:
+ none_reg_mode_clear_test_op (inst, inst_env);
+ break;
+
+ case cris_none_reg_mode_jump_op:
+ none_reg_mode_jump_op (inst, inst_env);
+ break;
+
+ case cris_none_reg_mode_move_from_preg_op:
+ none_reg_mode_move_from_preg_op (inst, inst_env);
+ break;
+
+ case cris_quick_mode_add_sub_op:
+ quick_mode_add_sub_op (inst, inst_env);
+ break;
+
+ case cris_quick_mode_and_cmp_move_or_op:
+ quick_mode_and_cmp_move_or_op (inst, inst_env);
+ break;
+
+ case cris_quick_mode_bdap_prefix:
+ quick_mode_bdap_prefix (inst, inst_env);
+ break;
+
+ case cris_reg_mode_add_sub_cmp_and_or_move_op:
+ reg_mode_add_sub_cmp_and_or_move_op (inst, inst_env);
+ break;
+
+ case cris_reg_mode_clear_op:
+ reg_mode_clear_op (inst, inst_env);
+ break;
+
+ case cris_reg_mode_jump_op:
+ reg_mode_jump_op (inst, inst_env);
+ break;
+
+ case cris_reg_mode_move_from_preg_op:
+ reg_mode_move_from_preg_op (inst, inst_env);
+ break;
+
+ case cris_reg_mode_test_op:
+ reg_mode_test_op (inst, inst_env);
+ break;
+
+ case cris_scc_op:
+ scc_op (inst, inst_env);
+ break;
+
+ case cris_sixteen_bit_offset_branch_op:
+ sixteen_bit_offset_branch_op (inst, inst_env);
+ break;
+
+ case cris_three_operand_add_sub_cmp_and_or_op:
+ three_operand_add_sub_cmp_and_or_op (inst, inst_env);
+ break;
+
+ case cris_three_operand_bound_op:
+ three_operand_bound_op (inst, inst_env);
+ break;
+
+ case cris_two_operand_bound_op:
+ two_operand_bound_op (inst, inst_env);
+ break;
+
+ case cris_xor_op:
+ xor_op (inst, inst_env);
+ break;
+ }
+}
+
+/* This wrapper is to avoid cris_get_assembler being called before
+ exec_bfd has been set. */
+
+static int
+cris_delayed_get_disassembler (bfd_vma addr, disassemble_info *info)
+{
+ tm_print_insn = cris_get_disassembler (exec_bfd);
+ return (*tm_print_insn) (addr, info);
+}
+
+void
+_initialize_cris_tdep (void)
+{
+ struct cmd_list_element *c;
+
+ gdbarch_register (bfd_arch_cris, cris_gdbarch_init, cris_dump_tdep);
+
+ /* Used in disassembly. */
+ tm_print_insn = cris_delayed_get_disassembler;
+
+ /* CRIS-specific user-commands. */
+ c = add_set_cmd ("cris-version", class_support, var_integer,
+ (char *) &usr_cmd_cris_version,
+ "Set the current CRIS version.", &setlist);
+ c->function.sfunc = cris_version_update;
+ add_show_from_set (c, &showlist);
+
+ c = add_set_enum_cmd ("cris-mode", class_support, cris_mode_enums,
+ &usr_cmd_cris_mode,
+ "Set the current CRIS mode.", &setlist);
+ c->function.sfunc = cris_mode_update;
+ add_show_from_set (c, &showlist);
+
+ c = add_set_enum_cmd ("cris-abi", class_support, cris_abi_enums,
+ &usr_cmd_cris_abi,
+ "Set the current CRIS ABI version.", &setlist);
+ c->function.sfunc = cris_abi_update;
+ add_show_from_set (c, &showlist);
+}
+
+/* Prints out all target specific values. */
+
+static void
+cris_dump_tdep (struct gdbarch *gdbarch, struct ui_file *file)
+{
+ struct gdbarch_tdep *tdep = gdbarch_tdep (current_gdbarch);
+ if (tdep != NULL)
+ {
+ fprintf_unfiltered (file, "cris_dump_tdep: tdep->cris_version = %i\n",
+ tdep->cris_version);
+ fprintf_unfiltered (file, "cris_dump_tdep: tdep->cris_mode = %s\n",
+ tdep->cris_mode);
+ fprintf_unfiltered (file, "cris_dump_tdep: tdep->cris_abi = %s\n",
+ tdep->cris_abi);
+
+ }
+}
+
+static void
+cris_version_update (char *ignore_args, int from_tty,
+ struct cmd_list_element *c)
+{
+ struct gdbarch_info info;
+
+ /* From here on, trust the user's CRIS version setting. */
+ if (c->type == set_cmd)
+ {
+ usr_cmd_cris_version_valid = 1;
+
+ /* Update the current architecture, if needed. */
+ memset (&info, 0, sizeof info);
+ if (!gdbarch_update_p (info))
+ internal_error (__FILE__, __LINE__, "cris_gdbarch_update: failed to update architecture.");
+ }
+}
+
+static void
+cris_mode_update (char *ignore_args, int from_tty,
+ struct cmd_list_element *c)
+{
+ struct gdbarch_info info;
+
+ /* From here on, trust the user's CRIS mode setting. */
+ if (c->type == set_cmd)
+ {
+ usr_cmd_cris_mode_valid = 1;
+
+ /* Update the current architecture, if needed. */
+ memset (&info, 0, sizeof info);
+ if (!gdbarch_update_p (info))
+ internal_error (__FILE__, __LINE__, "cris_gdbarch_update: failed to update architecture.");
+ }
+}
+
+static void
+cris_abi_update (char *ignore_args, int from_tty,
+ struct cmd_list_element *c)
+{
+ struct gdbarch_info info;
+
+ /* From here on, trust the user's CRIS ABI setting. */
+ if (c->type == set_cmd)
+ {
+ usr_cmd_cris_abi_valid = 1;
+
+ /* Update the current architecture, if needed. */
+ memset (&info, 0, sizeof info);
+ if (!gdbarch_update_p (info))
+ internal_error (__FILE__, __LINE__, "cris_gdbarch_update: failed to update architecture.");
+ }
+}
+
+/* Copied from pa64solib.c, with a couple of minor changes. */
+
+static CORE_ADDR
+bfd_lookup_symbol (bfd *abfd, const char *symname)
+{
+ unsigned int storage_needed;
+ asymbol *sym;
+ asymbol **symbol_table;
+ unsigned int number_of_symbols;
+ unsigned int i;
+ struct cleanup *back_to;
+ CORE_ADDR symaddr = 0;
+
+ storage_needed = bfd_get_symtab_upper_bound (abfd);
+
+ if (storage_needed > 0)
+ {
+ symbol_table = (asymbol **) xmalloc (storage_needed);
+ back_to = make_cleanup (free, (PTR) symbol_table);
+ number_of_symbols = bfd_canonicalize_symtab (abfd, symbol_table);
+
+ for (i = 0; i < number_of_symbols; i++)
+ {
+ sym = *symbol_table++;
+ if (!strcmp (sym->name, symname))
+ {
+ /* Bfd symbols are section relative. */
+ symaddr = sym->value + sym->section->vma;
+ break;
+ }
+ }
+ do_cleanups (back_to);
+ }
+ return (symaddr);
+}
+
+static struct gdbarch *
+cris_gdbarch_init (struct gdbarch_info info, struct gdbarch_list *arches)
+{
+ struct gdbarch *gdbarch;
+ struct gdbarch_tdep *tdep;
+ int cris_version;
+ const char *cris_mode;
+ const char *cris_abi;
+ CORE_ADDR cris_abi_sym = 0;
+ int register_bytes;
+
+ if (usr_cmd_cris_version_valid)
+ {
+ /* Trust the user's CRIS version setting. */
+ cris_version = usr_cmd_cris_version;
+ }
+ else
+ {
+ /* Assume it's CRIS version 10. */
+ cris_version = 10;
+ }
+
+ if (usr_cmd_cris_mode_valid)
+ {
+ /* Trust the user's CRIS mode setting. */
+ cris_mode = usr_cmd_cris_mode;
+ }
+ else if (cris_version == 10)
+ {
+ /* Assume CRIS version 10 is in user mode. */
+ cris_mode = CRIS_MODE_USER;
+ }
+ else
+ {
+ /* Strictly speaking, older CRIS version don't have a supervisor mode,
+ but we regard its only mode as supervisor mode. */
+ cris_mode = CRIS_MODE_SUPERVISOR;
+ }
+
+ if (usr_cmd_cris_abi_valid)
+ {
+ /* Trust the user's ABI setting. */
+ cris_abi = usr_cmd_cris_abi;
+ }
+ else if (info.abfd)
+ {
+ if (bfd_get_flavour (info.abfd) == bfd_target_elf_flavour)
+ {
+ /* An elf target uses the new ABI. */
+ cris_abi = CRIS_ABI_V2;
+ }
+ else if (bfd_get_flavour (info.abfd) == bfd_target_aout_flavour)
+ {
+ /* An a.out target may use either ABI. Look for hints in the
+ symbol table. */
+ cris_abi_sym = bfd_lookup_symbol (info.abfd, CRIS_ABI_SYMBOL);
+ cris_abi = cris_abi_sym ? CRIS_ABI_V2 : CRIS_ABI_ORIGINAL;
+ }
+ else
+ {
+ /* Unknown bfd flavour. Assume it's the new ABI. */
+ cris_abi = CRIS_ABI_V2;
+ }
+ }
+ else if (gdbarch_tdep (current_gdbarch))
+ {
+ /* No bfd available. Stick with whatever ABI we're currently using.
+ (This is to avoid changing the ABI when the user updates the
+ architecture with the 'set cris-version' command.) */
+ cris_abi = gdbarch_tdep (current_gdbarch)->cris_abi;
+ }
+ else
+ {
+ /* No bfd, and no current architecture available. Assume it's the
+ new ABI. */
+ cris_abi = CRIS_ABI_V2;
+ }
+
+ /* Make the current settings visible to the user. */
+ usr_cmd_cris_version = cris_version;
+ usr_cmd_cris_mode = cris_mode;
+ usr_cmd_cris_abi = cris_abi;
+
+ /* Find a candidate among the list of pre-declared architectures. Both
+ CRIS version and ABI must match. */
+ for (arches = gdbarch_list_lookup_by_info (arches, &info);
+ arches != NULL;
+ arches = gdbarch_list_lookup_by_info (arches->next, &info))
+ {
+ if ((gdbarch_tdep (arches->gdbarch)->cris_version == cris_version)
+ && (gdbarch_tdep (arches->gdbarch)->cris_mode == cris_mode)
+ && (gdbarch_tdep (arches->gdbarch)->cris_abi == cris_abi))
+ return arches->gdbarch;
+ }
+
+ /* No matching architecture was found. Create a new one. */
+ tdep = (struct gdbarch_tdep *) xmalloc (sizeof (struct gdbarch_tdep));
+ gdbarch = gdbarch_alloc (&info, tdep);
+
+ tdep->cris_version = cris_version;
+ tdep->cris_mode = cris_mode;
+ tdep->cris_abi = cris_abi;
+
+ /* INIT shall ensure that the INFO.BYTE_ORDER is non-zero. */
+ switch (info.byte_order)
+ {
+ case LITTLE_ENDIAN:
+ /* Ok. */
+ break;
+
+ case BIG_ENDIAN:
+ internal_error (__FILE__, __LINE__, "cris_gdbarch_init: big endian byte order in info");
+ break;
+
+ default:
+ internal_error (__FILE__, __LINE__, "cris_gdbarch_init: unknown byte order in info");
+ }
+
+ /* Initialize the ABI dependent things. */
+ if (tdep->cris_abi == CRIS_ABI_ORIGINAL)
+ {
+ set_gdbarch_double_bit (gdbarch, 32);
+ set_gdbarch_push_arguments (gdbarch, cris_abi_original_push_arguments);
+ set_gdbarch_store_return_value (gdbarch,
+ cris_abi_original_store_return_value);
+ set_gdbarch_extract_return_value
+ (gdbarch, cris_abi_original_extract_return_value);
+ set_gdbarch_reg_struct_has_addr
+ (gdbarch, cris_abi_original_reg_struct_has_addr);
+ }
+ else if (tdep->cris_abi == CRIS_ABI_V2)
+ {
+ set_gdbarch_double_bit (gdbarch, 64);
+ set_gdbarch_push_arguments (gdbarch, cris_abi_v2_push_arguments);
+ set_gdbarch_store_return_value (gdbarch, cris_abi_v2_store_return_value);
+ set_gdbarch_extract_return_value (gdbarch,
+ cris_abi_v2_extract_return_value);
+ set_gdbarch_reg_struct_has_addr (gdbarch,
+ cris_abi_v2_reg_struct_has_addr);
+ }
+ else
+ internal_error (__FILE__, __LINE__, "cris_gdbarch_init: unknown CRIS ABI");
+
+ /* The default definition of a long double is 2 * TARGET_DOUBLE_BIT,
+ which means we have to set this explicitly. */
+ set_gdbarch_long_double_bit (gdbarch, 64);
+
+ /* Floating point is IEEE compatible. */
+ set_gdbarch_ieee_float (gdbarch, 1);
+
+ /* There are 32 registers (some of which may not be implemented). */
+ set_gdbarch_num_regs (gdbarch, 32);
+ set_gdbarch_sp_regnum (gdbarch, 14);
+ set_gdbarch_fp_regnum (gdbarch, 8);
+ set_gdbarch_pc_regnum (gdbarch, 15);
+
+ set_gdbarch_register_name (gdbarch, cris_register_name);
+
+ /* Length of ordinary registers used in push_word and a few other places.
+ REGISTER_RAW_SIZE is the real way to know how big a register is. */
+ set_gdbarch_register_size (gdbarch, 4);
+
+ /* NEW */
+ set_gdbarch_register_bytes_ok (gdbarch, cris_register_bytes_ok);
+ set_gdbarch_software_single_step (gdbarch, cris_software_single_step);
+
+
+ set_gdbarch_cannot_store_register (gdbarch, cris_cannot_store_register);
+ set_gdbarch_cannot_fetch_register (gdbarch, cris_cannot_fetch_register);
+
+
+ /* The total amount of space needed to store (in an array called registers)
+ GDB's copy of the machine's register state. Note: We can not use
+ cris_register_size at this point, since it relies on current_gdbarch
+ being set. */
+ switch (tdep->cris_version)
+ {
+ case 0:
+ case 1:
+ case 2:
+ case 3:
+ /* Support for these may be added later. */
+ internal_error (__FILE__, __LINE__, "cris_gdbarch_init: unsupported CRIS version");
+ break;
+
+ case 8:
+ case 9:
+ /* CRIS v8 and v9, a.k.a. ETRAX 100. General registers R0 - R15
+ (32 bits), special registers P0 - P1 (8 bits), P4 - P5 (16 bits),
+ and P8 - P14 (32 bits). */
+ register_bytes = (16 * 4) + (2 * 1) + (2 * 2) + (7 * 4);
+ break;
+
+ case 10:
+ case 11:
+ /* CRIS v10 and v11, a.k.a. ETRAX 100LX. In addition to ETRAX 100,
+ P7 (32 bits), and P15 (32 bits) have been implemented. */
+ register_bytes = (16 * 4) + (2 * 1) + (2 * 2) + (9 * 4);
+ break;
+
+ default:
+ internal_error (__FILE__, __LINE__, "cris_gdbarch_init: unknown CRIS version");
+ }
+
+ set_gdbarch_register_bytes (gdbarch, register_bytes);
+
+ /* Returns the register offset for the first byte of register regno's space
+ in the saved register state. */
+ set_gdbarch_register_byte (gdbarch, cris_register_offset);
+
+ /* The length of the registers in the actual machine representation. */
+ set_gdbarch_register_raw_size (gdbarch, cris_register_size);
+
+ /* The largest value REGISTER_RAW_SIZE can have. */
+ set_gdbarch_max_register_raw_size (gdbarch, 32);
+
+ /* The length of the registers in the program's representation. */
+ set_gdbarch_register_virtual_size (gdbarch, cris_register_size);
+
+ /* The largest value REGISTER_VIRTUAL_SIZE can have. */
+ set_gdbarch_max_register_virtual_size (gdbarch, 32);
+
+ set_gdbarch_register_virtual_type (gdbarch, cris_register_virtual_type);
+
+ /* Use generic dummy frames. */
+ set_gdbarch_use_generic_dummy_frames (gdbarch, 1);
+
+ /* Where to execute the call in the memory segments. */
+ set_gdbarch_call_dummy_location (gdbarch, AT_ENTRY_POINT);
+ set_gdbarch_call_dummy_address (gdbarch, entry_point_address);
+
+ /* Start execution at the beginning of dummy. */
+ set_gdbarch_call_dummy_start_offset (gdbarch, 0);
+ set_gdbarch_call_dummy_breakpoint_offset (gdbarch, 0);
+
+ /* Set to 1 since call_dummy_breakpoint_offset was defined. */
+ set_gdbarch_call_dummy_breakpoint_offset_p (gdbarch, 1);
+
+ /* Read all about dummy frames in blockframe.c. */
+ set_gdbarch_call_dummy_length (gdbarch, 0);
+ set_gdbarch_pc_in_call_dummy (gdbarch, pc_in_call_dummy_at_entry_point);
+
+ /* Defined to 1 to indicate that the target supports inferior function
+ calls. */
+ set_gdbarch_call_dummy_p (gdbarch, 1);
+ set_gdbarch_call_dummy_words (gdbarch, 0);
+ set_gdbarch_sizeof_call_dummy_words (gdbarch, 0);
+
+ /* No stack adjustment needed when peforming an inferior function call. */
+ set_gdbarch_call_dummy_stack_adjust_p (gdbarch, 0);
+ set_gdbarch_fix_call_dummy (gdbarch, generic_fix_call_dummy);
+
+ set_gdbarch_get_saved_register (gdbarch, generic_get_saved_register);
+
+ /* No register requires conversion from raw format to virtual format. */
+ set_gdbarch_register_convertible (gdbarch, generic_register_convertible_not);
+
+ set_gdbarch_push_dummy_frame (gdbarch, generic_push_dummy_frame);
+ set_gdbarch_push_return_address (gdbarch, cris_push_return_address);
+ set_gdbarch_pop_frame (gdbarch, cris_pop_frame);
+
+ set_gdbarch_store_struct_return (gdbarch, cris_store_struct_return);
+ set_gdbarch_extract_struct_value_address (gdbarch,
+ cris_extract_struct_value_address);
+ set_gdbarch_use_struct_convention (gdbarch, cris_use_struct_convention);
+
+ set_gdbarch_frame_init_saved_regs (gdbarch, cris_frame_init_saved_regs);
+ set_gdbarch_init_extra_frame_info (gdbarch, cris_init_extra_frame_info);
+ set_gdbarch_skip_prologue (gdbarch, cris_skip_prologue);
+ set_gdbarch_prologue_frameless_p (gdbarch, generic_prologue_frameless_p);
+
+ /* The stack grows downward. */
+ set_gdbarch_inner_than (gdbarch, core_addr_lessthan);
+
+ set_gdbarch_breakpoint_from_pc (gdbarch, cris_breakpoint_from_pc);
+
+ /* The PC must not be decremented after a breakpoint. (The breakpoint
+ handler takes care of that.) */
+ set_gdbarch_decr_pc_after_break (gdbarch, 0);
+
+ /* Offset from address of function to start of its code. */
+ set_gdbarch_function_start_offset (gdbarch, 0);
+
+ /* The number of bytes at the start of arglist that are not really args,
+ 0 in the CRIS ABI. */
+ set_gdbarch_frame_args_skip (gdbarch, 0);
+ set_gdbarch_frameless_function_invocation
+ (gdbarch, cris_frameless_function_invocation);
+ set_gdbarch_frame_chain (gdbarch, cris_frame_chain);
+ set_gdbarch_frame_chain_valid (gdbarch, generic_file_frame_chain_valid);
+
+ set_gdbarch_frame_saved_pc (gdbarch, cris_frame_saved_pc);
+ set_gdbarch_frame_args_address (gdbarch, cris_frame_args_address);
+ set_gdbarch_frame_locals_address (gdbarch, cris_frame_locals_address);
+ set_gdbarch_saved_pc_after_call (gdbarch, cris_saved_pc_after_call);
+
+ set_gdbarch_frame_num_args (gdbarch, frame_num_args_unknown);
+
+ /* No extra stack alignment needed. Set to 1 by default. */
+ set_gdbarch_extra_stack_alignment_needed (gdbarch, 0);
+
+ /* Helpful for backtracing and returning in a call dummy. */
+ set_gdbarch_save_dummy_frame_tos (gdbarch, generic_save_dummy_frame_tos);
+
+ return gdbarch;
+}
projects / binutils-gdb.git / commitdiff