--- /dev/null
+/*
+ * Copyright © 2015 Intel Corporation
+ *
+ * Permission is hereby granted, free of charge, to any person obtaining a
+ * copy of this software and associated documentation files (the "Software"),
+ * to deal in the Software without restriction, including without limitation
+ * the rights to use, copy, modify, merge, publish, distribute, sublicense,
+ * and/or sell copies of the Software, and to permit persons to whom the
+ * Software is furnished to do so, subject to the following conditions:
+ *
+ * The above copyright notice and this permission notice (including the next
+ * paragraph) shall be included in all copies or substantial portions of the
+ * Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+ * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+ * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL
+ * THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
+ * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS
+ * IN THE SOFTWARE.
+ */
+
+#include "brw_context.h"
+#include "brw_state.h"
+#include "brw_defines.h"
+#include "intel_batchbuffer.h"
+#include "program/prog_parameter.h"
+
+void
+gen7_upload_constant_state(struct brw_context *brw,
+ const struct brw_stage_state *stage_state,
+ bool active, unsigned opcode)
+{
+ uint32_t mocs = brw->gen < 8 ? GEN7_MOCS_L3 : 0;
+
+ /* Disable if the shader stage is inactive or there are no push constants. */
+ active = active && stage_state->push_const_size != 0;
+
+ int dwords = brw->gen >= 8 ? 11 : 7;
+ BEGIN_BATCH(dwords);
+ OUT_BATCH(opcode << 16 | (dwords - 2));
+
+ /* Workaround for SKL+ (we use option #2 until we have a need for more
+ * constant buffers). This comes from the documentation for 3DSTATE_CONSTANT_*
+ *
+ * The driver must ensure The following case does not occur without a flush
+ * to the 3D engine: 3DSTATE_CONSTANT_* with buffer 3 read length equal to
+ * zero committed followed by a 3DSTATE_CONSTANT_* with buffer 0 read length
+ * not equal to zero committed. Possible ways to avoid this condition
+ * include:
+ * 1. always force buffer 3 to have a non zero read length
+ * 2. always force buffer 0 to a zero read length
+ */
+ if (brw->gen >= 9 && active) {
+ OUT_BATCH(0);
+ OUT_BATCH(stage_state->push_const_size);
+ } else {
+ OUT_BATCH(active ? stage_state->push_const_size : 0);
+ OUT_BATCH(0);
+ }
+ /* Pointer to the constant buffer. Covered by the set of state flags
+ * from gen6_prepare_wm_contants
+ */
+ if (brw->gen >= 9 && active) {
+ OUT_BATCH(0);
+ OUT_BATCH(0);
+ OUT_BATCH(0);
+ OUT_BATCH(0);
+ /* XXX: When using buffers other than 0, you need to specify the
+ * graphics virtual address regardless of INSPM/debug bits
+ */
+ OUT_RELOC64(brw->batch.bo, I915_GEM_DOMAIN_RENDER, 0,
+ stage_state->push_const_offset);
+ OUT_BATCH(0);
+ OUT_BATCH(0);
+ } else if (brw->gen >= 8) {
+ OUT_BATCH(active ? (stage_state->push_const_offset | mocs) : 0);
+ OUT_BATCH(0);
+ OUT_BATCH(0);
+ OUT_BATCH(0);
+ OUT_BATCH(0);
+ OUT_BATCH(0);
+ OUT_BATCH(0);
+ OUT_BATCH(0);
+ } else {
+ OUT_BATCH(active ? (stage_state->push_const_offset | mocs) : 0);
+ OUT_BATCH(0);
+ OUT_BATCH(0);
+ OUT_BATCH(0);
+ }
+
+ ADVANCE_BATCH();
+
+ /* On SKL+ the new constants don't take effect until the next corresponding
+ * 3DSTATE_BINDING_TABLE_POINTER_* command is parsed so we need to ensure
+ * that is sent
+ */
+ if (brw->gen >= 9)
+ brw->ctx.NewDriverState |= BRW_NEW_SURFACES;
+}
+
+/**
+ * Creates a streamed BO containing the push constants for the VS or GS on
+ * gen6+.
+ *
+ * Push constants are constant values (such as GLSL uniforms) that are
+ * pre-loaded into a shader stage's register space at thread spawn time.
+ *
+ * Not all GLSL uniforms will be uploaded as push constants: The hardware has
+ * a limitation of 32 or 64 EU registers (256 or 512 floats) per stage to be
+ * uploaded as push constants, while GL 4.4 requires at least 1024 components
+ * to be usable for the VS. Plus, currently we always use pull constants
+ * instead of push constants when doing variable-index array access.
+ *
+ * See brw_curbe.c for the equivalent gen4/5 code.
+ */
+void
+gen6_upload_push_constants(struct brw_context *brw,
+ const struct gl_program *prog,
+ const struct brw_stage_prog_data *prog_data,
+ struct brw_stage_state *stage_state,
+ enum aub_state_struct_type type)
+{
+ struct gl_context *ctx = &brw->ctx;
+
+ if (prog_data->nr_params == 0) {
+ stage_state->push_const_size = 0;
+ } else {
+ /* Updates the ParamaterValues[i] pointers for all parameters of the
+ * basic type of PROGRAM_STATE_VAR.
+ */
+ /* XXX: Should this happen somewhere before to get our state flag set? */
+ if (prog)
+ _mesa_load_state_parameters(ctx, prog->Parameters);
+
+ gl_constant_value *param;
+ int i;
+
+ param = brw_state_batch(brw, type,
+ prog_data->nr_params * sizeof(gl_constant_value),
+ 32, &stage_state->push_const_offset);
+
+ STATIC_ASSERT(sizeof(gl_constant_value) == sizeof(float));
+
+ /* _NEW_PROGRAM_CONSTANTS
+ *
+ * Also _NEW_TRANSFORM -- we may reference clip planes other than as a
+ * side effect of dereferencing uniforms, so _NEW_PROGRAM_CONSTANTS
+ * wouldn't be set for them.
+ */
+ for (i = 0; i < prog_data->nr_params; i++) {
+ param[i] = *prog_data->param[i];
+ }
+
+ if (0) {
+ fprintf(stderr, "%s constants:\n",
+ _mesa_shader_stage_to_string(stage_state->stage));
+ for (i = 0; i < prog_data->nr_params; i++) {
+ if ((i & 7) == 0)
+ fprintf(stderr, "g%d: ",
+ prog_data->dispatch_grf_start_reg + i / 8);
+ fprintf(stderr, "%8f ", param[i].f);
+ if ((i & 7) == 7)
+ fprintf(stderr, "\n");
+ }
+ if ((i & 7) != 0)
+ fprintf(stderr, "\n");
+ fprintf(stderr, "\n");
+ }
+
+ stage_state->push_const_size = ALIGN(prog_data->nr_params, 8) / 8;
+ /* We can only push 32 registers of constants at a time. */
+
+ /* From the SNB PRM (vol2, part 1, section 3.2.1.4: 3DSTATE_CONSTANT_VS:
+ *
+ * "The sum of all four read length fields (each incremented to
+ * represent the actual read length) must be less than or equal to
+ * 32"
+ *
+ * From the IVB PRM (vol2, part 1, section 3.2.1.3: 3DSTATE_CONSTANT_VS:
+ *
+ * "The sum of all four read length fields must be less than or
+ * equal to the size of 64"
+ *
+ * The other shader stages all match the VS's limits.
+ */
+ assert(stage_state->push_const_size <= 32);
+ }
+}
#include "program/prog_statevars.h"
#include "intel_batchbuffer.h"
-/**
- * Creates a streamed BO containing the push constants for the VS or GS on
- * gen6+.
- *
- * Push constants are constant values (such as GLSL uniforms) that are
- * pre-loaded into a shader stage's register space at thread spawn time.
- *
- * Not all GLSL uniforms will be uploaded as push constants: The hardware has
- * a limitation of 32 or 64 EU registers (256 or 512 floats) per stage to be
- * uploaded as push constants, while GL 4.4 requires at least 1024 components
- * to be usable for the VS. Plus, currently we always use pull constants
- * instead of push constants when doing variable-index array access.
- *
- * See brw_curbe.c for the equivalent gen4/5 code.
- */
-void
-gen6_upload_push_constants(struct brw_context *brw,
- const struct gl_program *prog,
- const struct brw_stage_prog_data *prog_data,
- struct brw_stage_state *stage_state,
- enum aub_state_struct_type type)
-{
- struct gl_context *ctx = &brw->ctx;
-
- if (prog_data->nr_params == 0) {
- stage_state->push_const_size = 0;
- } else {
- /* Updates the ParamaterValues[i] pointers for all parameters of the
- * basic type of PROGRAM_STATE_VAR.
- */
- /* XXX: Should this happen somewhere before to get our state flag set? */
- if (prog)
- _mesa_load_state_parameters(ctx, prog->Parameters);
-
- gl_constant_value *param;
- unsigned i;
-
- param = brw_state_batch(brw, type,
- prog_data->nr_params * sizeof(gl_constant_value),
- 32, &stage_state->push_const_offset);
-
- STATIC_ASSERT(sizeof(gl_constant_value) == sizeof(float));
-
- /* _NEW_PROGRAM_CONSTANTS
- *
- * Also _NEW_TRANSFORM -- we may reference clip planes other than as a
- * side effect of dereferencing uniforms, so _NEW_PROGRAM_CONSTANTS
- * wouldn't be set for them.
- */
- for (i = 0; i < prog_data->nr_params; i++) {
- param[i] = *prog_data->param[i];
- }
-
- if (0) {
- fprintf(stderr, "%s constants:\n",
- _mesa_shader_stage_to_string(stage_state->stage));
- for (i = 0; i < prog_data->nr_params; i++) {
- if ((i & 7) == 0)
- fprintf(stderr, "g%d: ",
- prog_data->dispatch_grf_start_reg + i / 8);
- fprintf(stderr, "%8f ", param[i].f);
- if ((i & 7) == 7)
- fprintf(stderr, "\n");
- }
- if ((i & 7) != 0)
- fprintf(stderr, "\n");
- fprintf(stderr, "\n");
- }
-
- stage_state->push_const_size = ALIGN(prog_data->nr_params, 8) / 8;
- /* We can only push 32 registers of constants at a time. */
-
- /* From the SNB PRM (vol2, part 1, section 3.2.1.4: 3DSTATE_CONSTANT_VS:
- *
- * "The sum of all four read length fields (each incremented to
- * represent the actual read length) must be less than or equal to
- * 32"
- *
- * From the IVB PRM (vol2, part 1, section 3.2.1.3: 3DSTATE_CONSTANT_VS:
- *
- * "The sum of all four read length fields must be less than or
- * equal to the size of 64"
- *
- * The other shader stages all match the VS's limits.
- */
- assert(stage_state->push_const_size <= 32);
- }
-}
-
static void
gen6_upload_vs_push_constants(struct brw_context *brw)
{
#include "program/prog_statevars.h"
#include "intel_batchbuffer.h"
-
-void
-gen7_upload_constant_state(struct brw_context *brw,
- const struct brw_stage_state *stage_state,
- bool active, unsigned opcode)
-{
- uint32_t mocs = brw->gen < 8 ? GEN7_MOCS_L3 : 0;
-
- /* Disable if the shader stage is inactive or there are no push constants. */
- active = active && stage_state->push_const_size != 0;
-
- int dwords = brw->gen >= 8 ? 11 : 7;
- BEGIN_BATCH(dwords);
- OUT_BATCH(opcode << 16 | (dwords - 2));
-
- /* Workaround for SKL+ (we use option #2 until we have a need for more
- * constant buffers). This comes from the documentation for 3DSTATE_CONSTANT_*
- *
- * The driver must ensure The following case does not occur without a flush
- * to the 3D engine: 3DSTATE_CONSTANT_* with buffer 3 read length equal to
- * zero committed followed by a 3DSTATE_CONSTANT_* with buffer 0 read length
- * not equal to zero committed. Possible ways to avoid this condition
- * include:
- * 1. always force buffer 3 to have a non zero read length
- * 2. always force buffer 0 to a zero read length
- */
- if (brw->gen >= 9 && active) {
- OUT_BATCH(0);
- OUT_BATCH(stage_state->push_const_size);
- } else {
- OUT_BATCH(active ? stage_state->push_const_size : 0);
- OUT_BATCH(0);
- }
-
- /* Pointer to the constant buffer. Covered by the set of state flags
- * from gen6_prepare_wm_contants
- */
- if (brw->gen >= 9 && active) {
- OUT_BATCH(0);
- OUT_BATCH(0);
- OUT_BATCH(0);
- OUT_BATCH(0);
- /* XXX: When using buffers other than 0, you need to specify the
- * graphics virtual address regardless of INSPM/debug bits
- */
- OUT_RELOC64(brw->batch.bo, I915_GEM_DOMAIN_RENDER, 0,
- stage_state->push_const_offset);
- OUT_BATCH(0);
- OUT_BATCH(0);
- } else if (brw->gen>= 8) {
- OUT_BATCH(active ? (stage_state->push_const_offset | mocs) : 0);
- OUT_BATCH(0);
- OUT_BATCH(0);
- OUT_BATCH(0);
- OUT_BATCH(0);
- OUT_BATCH(0);
- OUT_BATCH(0);
- OUT_BATCH(0);
- } else {
- OUT_BATCH(active ? (stage_state->push_const_offset | mocs) : 0);
- OUT_BATCH(0);
- OUT_BATCH(0);
- OUT_BATCH(0);
- }
-
- ADVANCE_BATCH();
-
- /* On SKL+ the new constants don't take effect until the next corresponding
- * 3DSTATE_BINDING_TABLE_POINTER_* command is parsed so we need to ensure
- * that is sent
- */
- if (brw->gen >= 9)
- brw->ctx.NewDriverState |= BRW_NEW_SURFACES;
-}
-
static void
upload_vs_state(struct brw_context *brw)
{
projects / mesa.git / commitdiff