configs/qemu: bump relevant config versions

arm_nuri needs some DT fixups to switch to the 3.11.x series since it's
now default for that kernel defconfig.

[Peter: adjust comment in sparc defconfig to match]
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

diff --git a/board/qemu/arm-nuri/readme.txt b/board/qemu/arm-nuri/readme.txt
index 0c64492dab45d4620b57270b2c30fac3c442279e..0fed2f798fb34cc347ad3c8c5b7cbe90559f9095 100644 (file)
--- a/board/qemu/arm-nuri/readme.txt
+++ b/board/qemu/arm-nuri/readme.txt
@@ -7,4 +7,4 @@ graphical window is the framebuffer.
 
 Startup time is slow because of the SMP CPU emulation so be patient.
 
-Tested with QEMU 1.5.2
+Tested with QEMU 1.6.0

diff --git a/board/qemu/arm-versatile/linux-3.10.config b/board/qemu/arm-versatile/linux-3.10.config
deleted file mode 100644 (file)
index da73575..0000000
--- a/board/qemu/arm-versatile/linux-3.10.config
+++ /dev/null
@@ -1,89 +0,0 @@
-CONFIG_ARCH_VERSATILE=y
-CONFIG_EXPERIMENTAL=y
-# CONFIG_LOCALVERSION_AUTO is not set
-CONFIG_SYSVIPC=y
-CONFIG_LOG_BUF_SHIFT=14
-CONFIG_BLK_DEV_INITRD=y
-CONFIG_SLAB=y
-CONFIG_MODULES=y
-CONFIG_MODULE_UNLOAD=y
-CONFIG_MACH_VERSATILE_AB=y
-CONFIG_PCI=y
-CONFIG_AEABI=y
-# CONFIG_OABI_COMPAT is not set
-CONFIG_LEDS=y
-CONFIG_LEDS_CPU=y
-CONFIG_ZBOOT_ROM_TEXT=0x0
-CONFIG_ZBOOT_ROM_BSS=0x0
-CONFIG_CMDLINE="root=1f03 mem=32M"
-CONFIG_PM=y
-CONFIG_NET=y
-CONFIG_PACKET=y
-CONFIG_UNIX=y
-CONFIG_INET=y
-CONFIG_IP_MULTICAST=y
-CONFIG_IP_PNP=y
-CONFIG_IP_PNP_BOOTP=y
-# CONFIG_INET_DIAG is not set
-# CONFIG_IPV6 is not set
-CONFIG_MTD=y
-CONFIG_MTD_PARTITIONS=y
-CONFIG_MTD_CMDLINE_PARTS=y
-CONFIG_MTD_CHAR=y
-CONFIG_MTD_BLOCK=y
-CONFIG_MTD_CFI=y
-CONFIG_MTD_CFI_ADV_OPTIONS=y
-CONFIG_MTD_CFI_INTELEXT=y
-CONFIG_MTD_PHYSMAP=y
-CONFIG_BLK_DEV_RAM=y
-CONFIG_SCSI=y
-CONFIG_BLK_DEV_SD=y
-CONFIG_SCSI_SYM53C8XX_2=y
-CONFIG_EEPROM_LEGACY=m
-CONFIG_NETDEVICES=y
-CONFIG_NET_ETHERNET=y
-CONFIG_SMC91X=y
-# CONFIG_SERIO_SERPORT is not set
-CONFIG_SERIO_AMBAKMI=y
-CONFIG_SERIAL_8250=m
-CONFIG_SERIAL_8250_EXTENDED=y
-CONFIG_SERIAL_8250_MANY_PORTS=y
-CONFIG_SERIAL_8250_SHARE_IRQ=y
-CONFIG_SERIAL_8250_RSA=y
-CONFIG_SERIAL_AMBA_PL011=y
-CONFIG_SERIAL_AMBA_PL011_CONSOLE=y
-CONFIG_LEGACY_PTY_COUNT=16
-CONFIG_I2C=y
-CONFIG_I2C_CHARDEV=m
-# CONFIG_HWMON is not set
-CONFIG_FB=y
-CONFIG_FB_ARMCLCD=y
-CONFIG_FRAMEBUFFER_CONSOLE=y
-CONFIG_FONTS=y
-CONFIG_FONT_ACORN_8x8=y
-CONFIG_SOUND=y
-CONFIG_SND=m
-CONFIG_SND_MIXER_OSS=m
-CONFIG_SND_PCM_OSS=m
-CONFIG_SND_ARMAACI=m
-CONFIG_MMC=y
-CONFIG_MMC_ARMMMCI=m
-CONFIG_EXT2_FS=y
-CONFIG_VFAT_FS=m
-CONFIG_JFFS2_FS=y
-CONFIG_CRAMFS=y
-CONFIG_MINIX_FS=y
-CONFIG_ROMFS_FS=y
-CONFIG_NFS_FS=y
-CONFIG_NFS_V3=y
-CONFIG_ROOT_NFS=y
-CONFIG_NFSD=y
-CONFIG_NFSD_V3=y
-CONFIG_PARTITION_ADVANCED=y
-CONFIG_NLS_CODEPAGE_850=m
-CONFIG_NLS_ISO8859_1=m
-CONFIG_MAGIC_SYSRQ=y
-CONFIG_DEBUG_KERNEL=y
-CONFIG_DEBUG_USER=y
-CONFIG_DEBUG_ERRORS=y
-CONFIG_DEBUG_LL=y

diff --git a/board/qemu/arm-versatile/linux-3.11.config b/board/qemu/arm-versatile/linux-3.11.config
new file mode 100644 (file)
index 0000000..da73575
--- /dev/null
+++ b/board/qemu/arm-versatile/linux-3.11.config
@@ -0,0 +1,89 @@
+CONFIG_ARCH_VERSATILE=y
+CONFIG_EXPERIMENTAL=y
+# CONFIG_LOCALVERSION_AUTO is not set
+CONFIG_SYSVIPC=y
+CONFIG_LOG_BUF_SHIFT=14
+CONFIG_BLK_DEV_INITRD=y
+CONFIG_SLAB=y
+CONFIG_MODULES=y
+CONFIG_MODULE_UNLOAD=y
+CONFIG_MACH_VERSATILE_AB=y
+CONFIG_PCI=y
+CONFIG_AEABI=y
+# CONFIG_OABI_COMPAT is not set
+CONFIG_LEDS=y
+CONFIG_LEDS_CPU=y
+CONFIG_ZBOOT_ROM_TEXT=0x0
+CONFIG_ZBOOT_ROM_BSS=0x0
+CONFIG_CMDLINE="root=1f03 mem=32M"
+CONFIG_PM=y
+CONFIG_NET=y
+CONFIG_PACKET=y
+CONFIG_UNIX=y
+CONFIG_INET=y
+CONFIG_IP_MULTICAST=y
+CONFIG_IP_PNP=y
+CONFIG_IP_PNP_BOOTP=y
+# CONFIG_INET_DIAG is not set
+# CONFIG_IPV6 is not set
+CONFIG_MTD=y
+CONFIG_MTD_PARTITIONS=y
+CONFIG_MTD_CMDLINE_PARTS=y
+CONFIG_MTD_CHAR=y
+CONFIG_MTD_BLOCK=y
+CONFIG_MTD_CFI=y
+CONFIG_MTD_CFI_ADV_OPTIONS=y
+CONFIG_MTD_CFI_INTELEXT=y
+CONFIG_MTD_PHYSMAP=y
+CONFIG_BLK_DEV_RAM=y
+CONFIG_SCSI=y
+CONFIG_BLK_DEV_SD=y
+CONFIG_SCSI_SYM53C8XX_2=y
+CONFIG_EEPROM_LEGACY=m
+CONFIG_NETDEVICES=y
+CONFIG_NET_ETHERNET=y
+CONFIG_SMC91X=y
+# CONFIG_SERIO_SERPORT is not set
+CONFIG_SERIO_AMBAKMI=y
+CONFIG_SERIAL_8250=m
+CONFIG_SERIAL_8250_EXTENDED=y
+CONFIG_SERIAL_8250_MANY_PORTS=y
+CONFIG_SERIAL_8250_SHARE_IRQ=y
+CONFIG_SERIAL_8250_RSA=y
+CONFIG_SERIAL_AMBA_PL011=y
+CONFIG_SERIAL_AMBA_PL011_CONSOLE=y
+CONFIG_LEGACY_PTY_COUNT=16
+CONFIG_I2C=y
+CONFIG_I2C_CHARDEV=m
+# CONFIG_HWMON is not set
+CONFIG_FB=y
+CONFIG_FB_ARMCLCD=y
+CONFIG_FRAMEBUFFER_CONSOLE=y
+CONFIG_FONTS=y
+CONFIG_FONT_ACORN_8x8=y
+CONFIG_SOUND=y
+CONFIG_SND=m
+CONFIG_SND_MIXER_OSS=m
+CONFIG_SND_PCM_OSS=m
+CONFIG_SND_ARMAACI=m
+CONFIG_MMC=y
+CONFIG_MMC_ARMMMCI=m
+CONFIG_EXT2_FS=y
+CONFIG_VFAT_FS=m
+CONFIG_JFFS2_FS=y
+CONFIG_CRAMFS=y
+CONFIG_MINIX_FS=y
+CONFIG_ROMFS_FS=y
+CONFIG_NFS_FS=y
+CONFIG_NFS_V3=y
+CONFIG_ROOT_NFS=y
+CONFIG_NFSD=y
+CONFIG_NFSD_V3=y
+CONFIG_PARTITION_ADVANCED=y
+CONFIG_NLS_CODEPAGE_850=m
+CONFIG_NLS_ISO8859_1=m
+CONFIG_MAGIC_SYSRQ=y
+CONFIG_DEBUG_KERNEL=y
+CONFIG_DEBUG_USER=y
+CONFIG_DEBUG_ERRORS=y
+CONFIG_DEBUG_LL=y

diff --git a/board/qemu/arm-versatile/readme.txt b/board/qemu/arm-versatile/readme.txt
index e734d5602bc479090b3fcf829ab8dd1e484e80a1..4902c5497f80ef08816b07c30bec88880307f55d 100644 (file)
--- a/board/qemu/arm-versatile/readme.txt
+++ b/board/qemu/arm-versatile/readme.txt
@@ -5,4 +5,4 @@ Run the emulation with:
 The login prompt will appear in the terminal that started Qemu. The
 graphical window is the framebuffer.
 
-Tested with QEMU 1.5.2
+Tested with QEMU 1.6.0

diff --git a/board/qemu/arm-vexpress/readme.txt b/board/qemu/arm-vexpress/readme.txt
index bde90ef4e8739e549aa0617b29e91bef85ad5a7a..65d19962129885aa646a98857eb7560359b3d4b9 100644 (file)
--- a/board/qemu/arm-vexpress/readme.txt
+++ b/board/qemu/arm-vexpress/readme.txt
@@ -5,4 +5,4 @@ Run the emulation with:
 The login prompt will appear in the terminal that started Qemu. The
 graphical window is the framebuffer.
 
-Tested with QEMU 1.5.2
+Tested with QEMU 1.6.0

diff --git a/board/qemu/microblazebe-mmu/linux-3.10.config b/board/qemu/microblazebe-mmu/linux-3.10.config
deleted file mode 100644 (file)
index 7083cf5..0000000
--- a/board/qemu/microblazebe-mmu/linux-3.10.config
+++ /dev/null
@@ -1,68 +0,0 @@
-CONFIG_EXPERIMENTAL=y
-CONFIG_SYSVIPC=y
-CONFIG_IKCONFIG=y
-CONFIG_IKCONFIG_PROC=y
-CONFIG_SYSFS_DEPRECATED_V2=y
-CONFIG_BLK_DEV_INITRD=y
-CONFIG_INITRAMFS_SOURCE="rootfs.cpio"
-CONFIG_INITRAMFS_COMPRESSION_GZIP=y
-# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
-CONFIG_EXPERT=y
-CONFIG_KALLSYMS_ALL=y
-CONFIG_KALLSYMS_EXTRA_PASS=y
-# CONFIG_HOTPLUG is not set
-# CONFIG_BASE_FULL is not set
-# CONFIG_FUTEX is not set
-# CONFIG_EPOLL is not set
-# CONFIG_SIGNALFD is not set
-# CONFIG_SHMEM is not set
-CONFIG_SLAB=y
-CONFIG_MODULES=y
-CONFIG_MODULE_UNLOAD=y
-# CONFIG_BLK_DEV_BSG is not set
-CONFIG_OPT_LIB_ASM=y
-CONFIG_XILINX_MICROBLAZE0_FAMILY="spartan3adsp"
-CONFIG_XILINX_MICROBLAZE0_USE_MSR_INSTR=1
-CONFIG_XILINX_MICROBLAZE0_USE_PCMP_INSTR=1
-CONFIG_XILINX_MICROBLAZE0_USE_BARREL=1
-CONFIG_XILINX_MICROBLAZE0_USE_HW_MUL=1
-CONFIG_HZ_100=y
-CONFIG_MMU=y
-CONFIG_CMDLINE_BOOL=y
-CONFIG_CMDLINE_FORCE=y
-CONFIG_NET=y
-CONFIG_PACKET=y
-CONFIG_UNIX=y
-CONFIG_INET=y
-# CONFIG_INET_LRO is not set
-# CONFIG_IPV6 is not set
-CONFIG_PROC_DEVICETREE=y
-CONFIG_BLK_DEV_RAM=y
-CONFIG_BLK_DEV_RAM_SIZE=8192
-CONFIG_NETDEVICES=y
-CONFIG_NET_ETHERNET=y
-CONFIG_XILINX_EMACLITE=y
-# CONFIG_INPUT is not set
-# CONFIG_SERIO is not set
-# CONFIG_VT is not set
-CONFIG_SERIAL_UARTLITE=y
-CONFIG_SERIAL_UARTLITE_CONSOLE=y
-# CONFIG_HW_RANDOM is not set
-# CONFIG_HWMON is not set
-# CONFIG_USB_SUPPORT is not set
-CONFIG_EXT2_FS=y
-# CONFIG_DNOTIFY is not set
-CONFIG_NFS_FS=y
-CONFIG_NFS_V3=y
-CONFIG_CIFS=y
-CONFIG_CIFS_STATS=y
-CONFIG_CIFS_STATS2=y
-CONFIG_PARTITION_ADVANCED=y
-CONFIG_DEBUG_KERNEL=y
-CONFIG_DETECT_HUNG_TASK=y
-CONFIG_DEBUG_SLAB=y
-CONFIG_DEBUG_SPINLOCK=y
-CONFIG_DEBUG_INFO=y
-# CONFIG_RCU_CPU_STALL_DETECTOR is not set
-CONFIG_EARLY_PRINTK=y
-# CONFIG_CRYPTO_ANSI_CPRNG is not set

diff --git a/board/qemu/microblazebe-mmu/linux-3.11.config b/board/qemu/microblazebe-mmu/linux-3.11.config
new file mode 100644 (file)
index 0000000..7083cf5
--- /dev/null
+++ b/board/qemu/microblazebe-mmu/linux-3.11.config
@@ -0,0 +1,68 @@
+CONFIG_EXPERIMENTAL=y
+CONFIG_SYSVIPC=y
+CONFIG_IKCONFIG=y
+CONFIG_IKCONFIG_PROC=y
+CONFIG_SYSFS_DEPRECATED_V2=y
+CONFIG_BLK_DEV_INITRD=y
+CONFIG_INITRAMFS_SOURCE="rootfs.cpio"
+CONFIG_INITRAMFS_COMPRESSION_GZIP=y
+# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
+CONFIG_EXPERT=y
+CONFIG_KALLSYMS_ALL=y
+CONFIG_KALLSYMS_EXTRA_PASS=y
+# CONFIG_HOTPLUG is not set
+# CONFIG_BASE_FULL is not set
+# CONFIG_FUTEX is not set
+# CONFIG_EPOLL is not set
+# CONFIG_SIGNALFD is not set
+# CONFIG_SHMEM is not set
+CONFIG_SLAB=y
+CONFIG_MODULES=y
+CONFIG_MODULE_UNLOAD=y
+# CONFIG_BLK_DEV_BSG is not set
+CONFIG_OPT_LIB_ASM=y
+CONFIG_XILINX_MICROBLAZE0_FAMILY="spartan3adsp"
+CONFIG_XILINX_MICROBLAZE0_USE_MSR_INSTR=1
+CONFIG_XILINX_MICROBLAZE0_USE_PCMP_INSTR=1
+CONFIG_XILINX_MICROBLAZE0_USE_BARREL=1
+CONFIG_XILINX_MICROBLAZE0_USE_HW_MUL=1
+CONFIG_HZ_100=y
+CONFIG_MMU=y
+CONFIG_CMDLINE_BOOL=y
+CONFIG_CMDLINE_FORCE=y
+CONFIG_NET=y
+CONFIG_PACKET=y
+CONFIG_UNIX=y
+CONFIG_INET=y
+# CONFIG_INET_LRO is not set
+# CONFIG_IPV6 is not set
+CONFIG_PROC_DEVICETREE=y
+CONFIG_BLK_DEV_RAM=y
+CONFIG_BLK_DEV_RAM_SIZE=8192
+CONFIG_NETDEVICES=y
+CONFIG_NET_ETHERNET=y
+CONFIG_XILINX_EMACLITE=y
+# CONFIG_INPUT is not set
+# CONFIG_SERIO is not set
+# CONFIG_VT is not set
+CONFIG_SERIAL_UARTLITE=y
+CONFIG_SERIAL_UARTLITE_CONSOLE=y
+# CONFIG_HW_RANDOM is not set
+# CONFIG_HWMON is not set
+# CONFIG_USB_SUPPORT is not set
+CONFIG_EXT2_FS=y
+# CONFIG_DNOTIFY is not set
+CONFIG_NFS_FS=y
+CONFIG_NFS_V3=y
+CONFIG_CIFS=y
+CONFIG_CIFS_STATS=y
+CONFIG_CIFS_STATS2=y
+CONFIG_PARTITION_ADVANCED=y
+CONFIG_DEBUG_KERNEL=y
+CONFIG_DETECT_HUNG_TASK=y
+CONFIG_DEBUG_SLAB=y
+CONFIG_DEBUG_SPINLOCK=y
+CONFIG_DEBUG_INFO=y
+# CONFIG_RCU_CPU_STALL_DETECTOR is not set
+CONFIG_EARLY_PRINTK=y
+# CONFIG_CRYPTO_ANSI_CPRNG is not set

diff --git a/board/qemu/microblazebe-mmu/readme.txt b/board/qemu/microblazebe-mmu/readme.txt
index 7d172d1870e40d14df54582d38883989015e5ee6..473a93426cff0f9d119506b64e1a0cbe54360c83 100644 (file)
--- a/board/qemu/microblazebe-mmu/readme.txt
+++ b/board/qemu/microblazebe-mmu/readme.txt
@@ -4,4 +4,4 @@ Run the emulation with:
 
 The login prompt will appear in the terminal that started Qemu.
 
-Tested with QEMU 1.5.2
+Tested with QEMU 1.6.0

diff --git a/board/qemu/microblazeel-mmu/linux-3.10.config b/board/qemu/microblazeel-mmu/linux-3.10.config
deleted file mode 100644 (file)
index cdeb324..0000000
--- a/board/qemu/microblazeel-mmu/linux-3.10.config
+++ /dev/null
@@ -1,67 +0,0 @@
-CONFIG_EXPERIMENTAL=y
-CONFIG_SYSVIPC=y
-CONFIG_IKCONFIG=y
-CONFIG_IKCONFIG_PROC=y
-CONFIG_SYSFS_DEPRECATED_V2=y
-CONFIG_BLK_DEV_INITRD=y
-CONFIG_INITRAMFS_SOURCE="rootfs.cpio"
-CONFIG_INITRAMFS_COMPRESSION_GZIP=y
-# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
-CONFIG_EXPERT=y
-CONFIG_KALLSYMS_ALL=y
-CONFIG_KALLSYMS_EXTRA_PASS=y
-# CONFIG_HOTPLUG is not set
-# CONFIG_BASE_FULL is not set
-# CONFIG_FUTEX is not set
-# CONFIG_EPOLL is not set
-# CONFIG_SIGNALFD is not set
-# CONFIG_SHMEM is not set
-CONFIG_SLAB=y
-CONFIG_MODULES=y
-CONFIG_MODULE_UNLOAD=y
-# CONFIG_BLK_DEV_BSG is not set
-CONFIG_XILINX_MICROBLAZE0_FAMILY="spartan3adsp"
-CONFIG_XILINX_MICROBLAZE0_USE_MSR_INSTR=1
-CONFIG_XILINX_MICROBLAZE0_USE_PCMP_INSTR=1
-CONFIG_XILINX_MICROBLAZE0_USE_BARREL=1
-CONFIG_XILINX_MICROBLAZE0_USE_HW_MUL=1
-CONFIG_HZ_100=y
-CONFIG_MMU=y
-CONFIG_CMDLINE_BOOL=y
-CONFIG_CMDLINE_FORCE=y
-CONFIG_NET=y
-CONFIG_PACKET=y
-CONFIG_UNIX=y
-CONFIG_INET=y
-# CONFIG_INET_LRO is not set
-# CONFIG_IPV6 is not set
-CONFIG_PROC_DEVICETREE=y
-CONFIG_BLK_DEV_RAM=y
-CONFIG_BLK_DEV_RAM_SIZE=8192
-CONFIG_NETDEVICES=y
-CONFIG_NET_ETHERNET=y
-CONFIG_XILINX_EMACLITE=y
-# CONFIG_INPUT is not set
-# CONFIG_SERIO is not set
-# CONFIG_VT is not set
-CONFIG_SERIAL_UARTLITE=y
-CONFIG_SERIAL_UARTLITE_CONSOLE=y
-# CONFIG_HW_RANDOM is not set
-# CONFIG_HWMON is not set
-# CONFIG_USB_SUPPORT is not set
-CONFIG_EXT2_FS=y
-# CONFIG_DNOTIFY is not set
-CONFIG_NFS_FS=y
-CONFIG_NFS_V3=y
-CONFIG_CIFS=y
-CONFIG_CIFS_STATS=y
-CONFIG_CIFS_STATS2=y
-CONFIG_PARTITION_ADVANCED=y
-CONFIG_DEBUG_KERNEL=y
-CONFIG_DETECT_HUNG_TASK=y
-CONFIG_DEBUG_SLAB=y
-CONFIG_DEBUG_SPINLOCK=y
-CONFIG_DEBUG_INFO=y
-# CONFIG_RCU_CPU_STALL_DETECTOR is not set
-CONFIG_EARLY_PRINTK=y
-# CONFIG_CRYPTO_ANSI_CPRNG is not set

diff --git a/board/qemu/microblazeel-mmu/linux-3.11.config b/board/qemu/microblazeel-mmu/linux-3.11.config
new file mode 100644 (file)
index 0000000..cdeb324
--- /dev/null
+++ b/board/qemu/microblazeel-mmu/linux-3.11.config
@@ -0,0 +1,67 @@
+CONFIG_EXPERIMENTAL=y
+CONFIG_SYSVIPC=y
+CONFIG_IKCONFIG=y
+CONFIG_IKCONFIG_PROC=y
+CONFIG_SYSFS_DEPRECATED_V2=y
+CONFIG_BLK_DEV_INITRD=y
+CONFIG_INITRAMFS_SOURCE="rootfs.cpio"
+CONFIG_INITRAMFS_COMPRESSION_GZIP=y
+# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
+CONFIG_EXPERT=y
+CONFIG_KALLSYMS_ALL=y
+CONFIG_KALLSYMS_EXTRA_PASS=y
+# CONFIG_HOTPLUG is not set
+# CONFIG_BASE_FULL is not set
+# CONFIG_FUTEX is not set
+# CONFIG_EPOLL is not set
+# CONFIG_SIGNALFD is not set
+# CONFIG_SHMEM is not set
+CONFIG_SLAB=y
+CONFIG_MODULES=y
+CONFIG_MODULE_UNLOAD=y
+# CONFIG_BLK_DEV_BSG is not set
+CONFIG_XILINX_MICROBLAZE0_FAMILY="spartan3adsp"
+CONFIG_XILINX_MICROBLAZE0_USE_MSR_INSTR=1
+CONFIG_XILINX_MICROBLAZE0_USE_PCMP_INSTR=1
+CONFIG_XILINX_MICROBLAZE0_USE_BARREL=1
+CONFIG_XILINX_MICROBLAZE0_USE_HW_MUL=1
+CONFIG_HZ_100=y
+CONFIG_MMU=y
+CONFIG_CMDLINE_BOOL=y
+CONFIG_CMDLINE_FORCE=y
+CONFIG_NET=y
+CONFIG_PACKET=y
+CONFIG_UNIX=y
+CONFIG_INET=y
+# CONFIG_INET_LRO is not set
+# CONFIG_IPV6 is not set
+CONFIG_PROC_DEVICETREE=y
+CONFIG_BLK_DEV_RAM=y
+CONFIG_BLK_DEV_RAM_SIZE=8192
+CONFIG_NETDEVICES=y
+CONFIG_NET_ETHERNET=y
+CONFIG_XILINX_EMACLITE=y
+# CONFIG_INPUT is not set
+# CONFIG_SERIO is not set
+# CONFIG_VT is not set
+CONFIG_SERIAL_UARTLITE=y
+CONFIG_SERIAL_UARTLITE_CONSOLE=y
+# CONFIG_HW_RANDOM is not set
+# CONFIG_HWMON is not set
+# CONFIG_USB_SUPPORT is not set
+CONFIG_EXT2_FS=y
+# CONFIG_DNOTIFY is not set
+CONFIG_NFS_FS=y
+CONFIG_NFS_V3=y
+CONFIG_CIFS=y
+CONFIG_CIFS_STATS=y
+CONFIG_CIFS_STATS2=y
+CONFIG_PARTITION_ADVANCED=y
+CONFIG_DEBUG_KERNEL=y
+CONFIG_DETECT_HUNG_TASK=y
+CONFIG_DEBUG_SLAB=y
+CONFIG_DEBUG_SPINLOCK=y
+CONFIG_DEBUG_INFO=y
+# CONFIG_RCU_CPU_STALL_DETECTOR is not set
+CONFIG_EARLY_PRINTK=y
+# CONFIG_CRYPTO_ANSI_CPRNG is not set

diff --git a/board/qemu/microblazeel-mmu/readme.txt b/board/qemu/microblazeel-mmu/readme.txt
index 9728a45ddf98796d8075a4374e88c210311c874b..baddc7ad920e740fe7ce128278e6be821f8be13d 100644 (file)
--- a/board/qemu/microblazeel-mmu/readme.txt
+++ b/board/qemu/microblazeel-mmu/readme.txt
@@ -4,4 +4,4 @@ Run the emulation with:
 
 The login prompt will appear in the terminal that started Qemu.
 
-Tested with QEMU 1.5.2
+Tested with QEMU 1.6.0

diff --git a/board/qemu/mips-malta/linux-3.10.config b/board/qemu/mips-malta/linux-3.10.config
deleted file mode 100644 (file)
index 7549ccc..0000000
--- a/board/qemu/mips-malta/linux-3.10.config
+++ /dev/null
@@ -1,76 +0,0 @@
-CONFIG_MIPS_MALTA=y
-CONFIG_CPU_MIPS32_R2=y
-CONFIG_MIPS_MT_SMP=y
-CONFIG_NO_HZ=y
-CONFIG_HIGH_RES_TIMERS=y
-CONFIG_HZ_100=y
-CONFIG_EXPERIMENTAL=y
-CONFIG_SYSVIPC=y
-CONFIG_LOG_BUF_SHIFT=15
-CONFIG_SYSFS_DEPRECATED_V2=y
-CONFIG_RELAY=y
-CONFIG_NAMESPACES=y
-CONFIG_UTS_NS=y
-CONFIG_IPC_NS=y
-CONFIG_PID_NS=y
-# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
-CONFIG_EMBEDDED=y
-# CONFIG_SYSCTL_SYSCALL is not set
-# CONFIG_COMPAT_BRK is not set
-CONFIG_SLAB=y
-CONFIG_MODULES=y
-CONFIG_MODULE_UNLOAD=y
-CONFIG_MODVERSIONS=y
-CONFIG_MODULE_SRCVERSION_ALL=y
-# CONFIG_BLK_DEV_BSG is not set
-CONFIG_PCI=y
-CONFIG_PM=y
-CONFIG_NET=y
-CONFIG_PACKET=y
-CONFIG_UNIX=y
-CONFIG_INET=y
-CONFIG_IP_PNP=y
-# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
-# CONFIG_INET_XFRM_MODE_TUNNEL is not set
-# CONFIG_INET_XFRM_MODE_BEET is not set
-# CONFIG_INET_LRO is not set
-# CONFIG_INET_DIAG is not set
-# CONFIG_IPV6 is not set
-# CONFIG_WIRELESS is not set
-CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
-# CONFIG_MISC_DEVICES is not set
-CONFIG_IDE=y
-CONFIG_BLK_DEV_IDECD=y
-CONFIG_IDE_GENERIC=y
-CONFIG_BLK_DEV_GENERIC=y
-CONFIG_BLK_DEV_PIIX=y
-CONFIG_NETDEVICES=y
-CONFIG_NET_ETHERNET=y
-CONFIG_NET_PCI=y
-CONFIG_PCNET32=y
-# CONFIG_NETDEV_1000 is not set
-# CONFIG_NETDEV_10000 is not set
-# CONFIG_WLAN is not set
-# CONFIG_INPUT_KEYBOARD is not set
-# CONFIG_INPUT_MOUSE is not set
-# CONFIG_SERIO_I8042 is not set
-CONFIG_VT_HW_CONSOLE_BINDING=y
-CONFIG_SERIAL_8250=y
-CONFIG_SERIAL_8250_CONSOLE=y
-# CONFIG_HW_RANDOM is not set
-# CONFIG_HWMON is not set
-# CONFIG_MFD_SUPPORT is not set
-CONFIG_FB=y
-CONFIG_FB_CIRRUS=y
-# CONFIG_VGA_CONSOLE is not set
-# CONFIG_HID_SUPPORT is not set
-# CONFIG_USB_SUPPORT is not set
-CONFIG_EXT2_FS=y
-CONFIG_EXT3_FS=y
-CONFIG_QUOTA=y
-CONFIG_PROC_KCORE=y
-CONFIG_TMPFS=y
-CONFIG_NFS_FS=y
-CONFIG_NFS_V3=y
-CONFIG_ROOT_NFS=y
-# CONFIG_RCU_CPU_STALL_DETECTOR is not set

diff --git a/board/qemu/mips-malta/linux-3.11.config b/board/qemu/mips-malta/linux-3.11.config
new file mode 100644 (file)
index 0000000..7549ccc
--- /dev/null
+++ b/board/qemu/mips-malta/linux-3.11.config
@@ -0,0 +1,76 @@
+CONFIG_MIPS_MALTA=y
+CONFIG_CPU_MIPS32_R2=y
+CONFIG_MIPS_MT_SMP=y
+CONFIG_NO_HZ=y
+CONFIG_HIGH_RES_TIMERS=y
+CONFIG_HZ_100=y
+CONFIG_EXPERIMENTAL=y
+CONFIG_SYSVIPC=y
+CONFIG_LOG_BUF_SHIFT=15
+CONFIG_SYSFS_DEPRECATED_V2=y
+CONFIG_RELAY=y
+CONFIG_NAMESPACES=y
+CONFIG_UTS_NS=y
+CONFIG_IPC_NS=y
+CONFIG_PID_NS=y
+# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
+CONFIG_EMBEDDED=y
+# CONFIG_SYSCTL_SYSCALL is not set
+# CONFIG_COMPAT_BRK is not set
+CONFIG_SLAB=y
+CONFIG_MODULES=y
+CONFIG_MODULE_UNLOAD=y
+CONFIG_MODVERSIONS=y
+CONFIG_MODULE_SRCVERSION_ALL=y
+# CONFIG_BLK_DEV_BSG is not set
+CONFIG_PCI=y
+CONFIG_PM=y
+CONFIG_NET=y
+CONFIG_PACKET=y
+CONFIG_UNIX=y
+CONFIG_INET=y
+CONFIG_IP_PNP=y
+# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
+# CONFIG_INET_XFRM_MODE_TUNNEL is not set
+# CONFIG_INET_XFRM_MODE_BEET is not set
+# CONFIG_INET_LRO is not set
+# CONFIG_INET_DIAG is not set
+# CONFIG_IPV6 is not set
+# CONFIG_WIRELESS is not set
+CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+# CONFIG_MISC_DEVICES is not set
+CONFIG_IDE=y
+CONFIG_BLK_DEV_IDECD=y
+CONFIG_IDE_GENERIC=y
+CONFIG_BLK_DEV_GENERIC=y
+CONFIG_BLK_DEV_PIIX=y
+CONFIG_NETDEVICES=y
+CONFIG_NET_ETHERNET=y
+CONFIG_NET_PCI=y
+CONFIG_PCNET32=y
+# CONFIG_NETDEV_1000 is not set
+# CONFIG_NETDEV_10000 is not set
+# CONFIG_WLAN is not set
+# CONFIG_INPUT_KEYBOARD is not set
+# CONFIG_INPUT_MOUSE is not set
+# CONFIG_SERIO_I8042 is not set
+CONFIG_VT_HW_CONSOLE_BINDING=y
+CONFIG_SERIAL_8250=y
+CONFIG_SERIAL_8250_CONSOLE=y
+# CONFIG_HW_RANDOM is not set
+# CONFIG_HWMON is not set
+# CONFIG_MFD_SUPPORT is not set
+CONFIG_FB=y
+CONFIG_FB_CIRRUS=y
+# CONFIG_VGA_CONSOLE is not set
+# CONFIG_HID_SUPPORT is not set
+# CONFIG_USB_SUPPORT is not set
+CONFIG_EXT2_FS=y
+CONFIG_EXT3_FS=y
+CONFIG_QUOTA=y
+CONFIG_PROC_KCORE=y
+CONFIG_TMPFS=y
+CONFIG_NFS_FS=y
+CONFIG_NFS_V3=y
+CONFIG_ROOT_NFS=y
+# CONFIG_RCU_CPU_STALL_DETECTOR is not set

diff --git a/board/qemu/mips-malta/readme.txt b/board/qemu/mips-malta/readme.txt
index ccdcc841e012b112c0345e7f02238de60ff7c6ed..33764ead60d2568597e36dd39abba056676b7ac4 100644 (file)
--- a/board/qemu/mips-malta/readme.txt
+++ b/board/qemu/mips-malta/readme.txt
@@ -6,4 +6,4 @@ The login prompt will appear in the terminal that started Qemu. The
 graphical window is the framebuffer. No keyboard support has been
 enabled.
 
-Tested with QEMU 1.5.2
+Tested with QEMU 1.6.0

diff --git a/board/qemu/mips64-malta/linux-3.10.config b/board/qemu/mips64-malta/linux-3.10.config
deleted file mode 100644 (file)
index 6e7f7ee..0000000
--- a/board/qemu/mips64-malta/linux-3.10.config
+++ /dev/null
@@ -1,78 +0,0 @@
-CONFIG_MIPS_MALTA=y
-CONFIG_CPU_MIPS64_R1=y
-CONFIG_64BIT=y
-CONFIG_64BIT_PHYS_ADDR=y
-CONFIG_MIPS_MT_SMP=y
-CONFIG_NO_HZ=y
-CONFIG_HIGH_RES_TIMERS=y
-CONFIG_HZ_100=y
-CONFIG_EXPERIMENTAL=y
-CONFIG_SYSVIPC=y
-CONFIG_LOG_BUF_SHIFT=15
-CONFIG_SYSFS_DEPRECATED_V2=y
-CONFIG_RELAY=y
-CONFIG_NAMESPACES=y
-CONFIG_UTS_NS=y
-CONFIG_IPC_NS=y
-CONFIG_PID_NS=y
-# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
-CONFIG_EMBEDDED=y
-# CONFIG_SYSCTL_SYSCALL is not set
-# CONFIG_COMPAT_BRK is not set
-CONFIG_SLAB=y
-CONFIG_MODULES=y
-CONFIG_MODULE_UNLOAD=y
-CONFIG_MODVERSIONS=y
-CONFIG_MODULE_SRCVERSION_ALL=y
-# CONFIG_BLK_DEV_BSG is not set
-CONFIG_PCI=y
-CONFIG_PM=y
-CONFIG_NET=y
-CONFIG_PACKET=y
-CONFIG_UNIX=y
-CONFIG_INET=y
-CONFIG_IP_PNP=y
-# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
-# CONFIG_INET_XFRM_MODE_TUNNEL is not set
-# CONFIG_INET_XFRM_MODE_BEET is not set
-# CONFIG_INET_LRO is not set
-# CONFIG_INET_DIAG is not set
-# CONFIG_IPV6 is not set
-# CONFIG_WIRELESS is not set
-CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
-# CONFIG_MISC_DEVICES is not set
-CONFIG_IDE=y
-CONFIG_BLK_DEV_IDECD=y
-CONFIG_IDE_GENERIC=y
-CONFIG_BLK_DEV_GENERIC=y
-CONFIG_BLK_DEV_PIIX=y
-CONFIG_NETDEVICES=y
-CONFIG_NET_ETHERNET=y
-CONFIG_NET_PCI=y
-CONFIG_PCNET32=y
-# CONFIG_NETDEV_1000 is not set
-# CONFIG_NETDEV_10000 is not set
-# CONFIG_WLAN is not set
-# CONFIG_INPUT_KEYBOARD is not set
-# CONFIG_INPUT_MOUSE is not set
-# CONFIG_SERIO_I8042 is not set
-CONFIG_VT_HW_CONSOLE_BINDING=y
-CONFIG_SERIAL_8250=y
-CONFIG_SERIAL_8250_CONSOLE=y
-# CONFIG_HW_RANDOM is not set
-# CONFIG_HWMON is not set
-# CONFIG_MFD_SUPPORT is not set
-CONFIG_FB=y
-CONFIG_FB_CIRRUS=y
-# CONFIG_VGA_CONSOLE is not set
-# CONFIG_HID_SUPPORT is not set
-# CONFIG_USB_SUPPORT is not set
-CONFIG_EXT2_FS=y
-CONFIG_EXT3_FS=y
-CONFIG_QUOTA=y
-CONFIG_PROC_KCORE=y
-CONFIG_TMPFS=y
-CONFIG_NFS_FS=y
-CONFIG_NFS_V3=y
-CONFIG_ROOT_NFS=y
-# CONFIG_RCU_CPU_STALL_DETECTOR is not set

diff --git a/board/qemu/mips64-malta/linux-3.11.config b/board/qemu/mips64-malta/linux-3.11.config
new file mode 100644 (file)
index 0000000..6e7f7ee
--- /dev/null
+++ b/board/qemu/mips64-malta/linux-3.11.config
@@ -0,0 +1,78 @@
+CONFIG_MIPS_MALTA=y
+CONFIG_CPU_MIPS64_R1=y
+CONFIG_64BIT=y
+CONFIG_64BIT_PHYS_ADDR=y
+CONFIG_MIPS_MT_SMP=y
+CONFIG_NO_HZ=y
+CONFIG_HIGH_RES_TIMERS=y
+CONFIG_HZ_100=y
+CONFIG_EXPERIMENTAL=y
+CONFIG_SYSVIPC=y
+CONFIG_LOG_BUF_SHIFT=15
+CONFIG_SYSFS_DEPRECATED_V2=y
+CONFIG_RELAY=y
+CONFIG_NAMESPACES=y
+CONFIG_UTS_NS=y
+CONFIG_IPC_NS=y
+CONFIG_PID_NS=y
+# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
+CONFIG_EMBEDDED=y
+# CONFIG_SYSCTL_SYSCALL is not set
+# CONFIG_COMPAT_BRK is not set
+CONFIG_SLAB=y
+CONFIG_MODULES=y
+CONFIG_MODULE_UNLOAD=y
+CONFIG_MODVERSIONS=y
+CONFIG_MODULE_SRCVERSION_ALL=y
+# CONFIG_BLK_DEV_BSG is not set
+CONFIG_PCI=y
+CONFIG_PM=y
+CONFIG_NET=y
+CONFIG_PACKET=y
+CONFIG_UNIX=y
+CONFIG_INET=y
+CONFIG_IP_PNP=y
+# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
+# CONFIG_INET_XFRM_MODE_TUNNEL is not set
+# CONFIG_INET_XFRM_MODE_BEET is not set
+# CONFIG_INET_LRO is not set
+# CONFIG_INET_DIAG is not set
+# CONFIG_IPV6 is not set
+# CONFIG_WIRELESS is not set
+CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+# CONFIG_MISC_DEVICES is not set
+CONFIG_IDE=y
+CONFIG_BLK_DEV_IDECD=y
+CONFIG_IDE_GENERIC=y
+CONFIG_BLK_DEV_GENERIC=y
+CONFIG_BLK_DEV_PIIX=y
+CONFIG_NETDEVICES=y
+CONFIG_NET_ETHERNET=y
+CONFIG_NET_PCI=y
+CONFIG_PCNET32=y
+# CONFIG_NETDEV_1000 is not set
+# CONFIG_NETDEV_10000 is not set
+# CONFIG_WLAN is not set
+# CONFIG_INPUT_KEYBOARD is not set
+# CONFIG_INPUT_MOUSE is not set
+# CONFIG_SERIO_I8042 is not set
+CONFIG_VT_HW_CONSOLE_BINDING=y
+CONFIG_SERIAL_8250=y
+CONFIG_SERIAL_8250_CONSOLE=y
+# CONFIG_HW_RANDOM is not set
+# CONFIG_HWMON is not set
+# CONFIG_MFD_SUPPORT is not set
+CONFIG_FB=y
+CONFIG_FB_CIRRUS=y
+# CONFIG_VGA_CONSOLE is not set
+# CONFIG_HID_SUPPORT is not set
+# CONFIG_USB_SUPPORT is not set
+CONFIG_EXT2_FS=y
+CONFIG_EXT3_FS=y
+CONFIG_QUOTA=y
+CONFIG_PROC_KCORE=y
+CONFIG_TMPFS=y
+CONFIG_NFS_FS=y
+CONFIG_NFS_V3=y
+CONFIG_ROOT_NFS=y
+# CONFIG_RCU_CPU_STALL_DETECTOR is not set

diff --git a/board/qemu/mips64-malta/readme.txt b/board/qemu/mips64-malta/readme.txt
index 73617227a3bef9ea1ff0134667999855d2d0a1e5..23b85abf74596b0665d925e6f7a91abd30cc516f 100644 (file)
--- a/board/qemu/mips64-malta/readme.txt
+++ b/board/qemu/mips64-malta/readme.txt
@@ -8,4 +8,4 @@ enabled.
 
 This configuration is known to be flaky.
 
-Tested with QEMU 1.5.2
+Tested with QEMU 1.6.0

diff --git a/board/qemu/mipsel-malta/linux-3.10.config b/board/qemu/mipsel-malta/linux-3.10.config
deleted file mode 100644 (file)
index b51de4b..0000000
--- a/board/qemu/mipsel-malta/linux-3.10.config
+++ /dev/null
@@ -1,77 +0,0 @@
-CONFIG_MIPS_MALTA=y
-CONFIG_CPU_LITTLE_ENDIAN=y
-CONFIG_CPU_MIPS32_R2=y
-CONFIG_MIPS_MT_SMP=y
-CONFIG_NO_HZ=y
-CONFIG_HIGH_RES_TIMERS=y
-CONFIG_HZ_100=y
-CONFIG_EXPERIMENTAL=y
-CONFIG_SYSVIPC=y
-CONFIG_LOG_BUF_SHIFT=15
-CONFIG_SYSFS_DEPRECATED_V2=y
-CONFIG_RELAY=y
-CONFIG_NAMESPACES=y
-CONFIG_UTS_NS=y
-CONFIG_IPC_NS=y
-CONFIG_PID_NS=y
-# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
-CONFIG_EMBEDDED=y
-# CONFIG_SYSCTL_SYSCALL is not set
-# CONFIG_COMPAT_BRK is not set
-CONFIG_SLAB=y
-CONFIG_MODULES=y
-CONFIG_MODULE_UNLOAD=y
-CONFIG_MODVERSIONS=y
-CONFIG_MODULE_SRCVERSION_ALL=y
-# CONFIG_BLK_DEV_BSG is not set
-CONFIG_PCI=y
-CONFIG_PM=y
-CONFIG_NET=y
-CONFIG_PACKET=y
-CONFIG_UNIX=y
-CONFIG_INET=y
-CONFIG_IP_PNP=y
-# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
-# CONFIG_INET_XFRM_MODE_TUNNEL is not set
-# CONFIG_INET_XFRM_MODE_BEET is not set
-# CONFIG_INET_LRO is not set
-# CONFIG_INET_DIAG is not set
-# CONFIG_IPV6 is not set
-# CONFIG_WIRELESS is not set
-CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
-# CONFIG_MISC_DEVICES is not set
-CONFIG_IDE=y
-CONFIG_BLK_DEV_IDECD=y
-CONFIG_IDE_GENERIC=y
-CONFIG_BLK_DEV_GENERIC=y
-CONFIG_BLK_DEV_PIIX=y
-CONFIG_NETDEVICES=y
-CONFIG_NET_ETHERNET=y
-CONFIG_NET_PCI=y
-CONFIG_PCNET32=y
-# CONFIG_NETDEV_1000 is not set
-# CONFIG_NETDEV_10000 is not set
-# CONFIG_WLAN is not set
-# CONFIG_INPUT_KEYBOARD is not set
-# CONFIG_INPUT_MOUSE is not set
-# CONFIG_SERIO_I8042 is not set
-CONFIG_VT_HW_CONSOLE_BINDING=y
-CONFIG_SERIAL_8250=y
-CONFIG_SERIAL_8250_CONSOLE=y
-# CONFIG_HW_RANDOM is not set
-# CONFIG_HWMON is not set
-# CONFIG_MFD_SUPPORT is not set
-CONFIG_FB=y
-CONFIG_FB_CIRRUS=y
-# CONFIG_VGA_CONSOLE is not set
-# CONFIG_HID_SUPPORT is not set
-# CONFIG_USB_SUPPORT is not set
-CONFIG_EXT2_FS=y
-CONFIG_EXT3_FS=y
-CONFIG_QUOTA=y
-CONFIG_PROC_KCORE=y
-CONFIG_TMPFS=y
-CONFIG_NFS_FS=y
-CONFIG_NFS_V3=y
-CONFIG_ROOT_NFS=y
-# CONFIG_RCU_CPU_STALL_DETECTOR is not set

diff --git a/board/qemu/mipsel-malta/linux-3.11.config b/board/qemu/mipsel-malta/linux-3.11.config
new file mode 100644 (file)
index 0000000..b51de4b
--- /dev/null
+++ b/board/qemu/mipsel-malta/linux-3.11.config
@@ -0,0 +1,77 @@
+CONFIG_MIPS_MALTA=y
+CONFIG_CPU_LITTLE_ENDIAN=y
+CONFIG_CPU_MIPS32_R2=y
+CONFIG_MIPS_MT_SMP=y
+CONFIG_NO_HZ=y
+CONFIG_HIGH_RES_TIMERS=y
+CONFIG_HZ_100=y
+CONFIG_EXPERIMENTAL=y
+CONFIG_SYSVIPC=y
+CONFIG_LOG_BUF_SHIFT=15
+CONFIG_SYSFS_DEPRECATED_V2=y
+CONFIG_RELAY=y
+CONFIG_NAMESPACES=y
+CONFIG_UTS_NS=y
+CONFIG_IPC_NS=y
+CONFIG_PID_NS=y
+# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
+CONFIG_EMBEDDED=y
+# CONFIG_SYSCTL_SYSCALL is not set
+# CONFIG_COMPAT_BRK is not set
+CONFIG_SLAB=y
+CONFIG_MODULES=y
+CONFIG_MODULE_UNLOAD=y
+CONFIG_MODVERSIONS=y
+CONFIG_MODULE_SRCVERSION_ALL=y
+# CONFIG_BLK_DEV_BSG is not set
+CONFIG_PCI=y
+CONFIG_PM=y
+CONFIG_NET=y
+CONFIG_PACKET=y
+CONFIG_UNIX=y
+CONFIG_INET=y
+CONFIG_IP_PNP=y
+# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
+# CONFIG_INET_XFRM_MODE_TUNNEL is not set
+# CONFIG_INET_XFRM_MODE_BEET is not set
+# CONFIG_INET_LRO is not set
+# CONFIG_INET_DIAG is not set
+# CONFIG_IPV6 is not set
+# CONFIG_WIRELESS is not set
+CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+# CONFIG_MISC_DEVICES is not set
+CONFIG_IDE=y
+CONFIG_BLK_DEV_IDECD=y
+CONFIG_IDE_GENERIC=y
+CONFIG_BLK_DEV_GENERIC=y
+CONFIG_BLK_DEV_PIIX=y
+CONFIG_NETDEVICES=y
+CONFIG_NET_ETHERNET=y
+CONFIG_NET_PCI=y
+CONFIG_PCNET32=y
+# CONFIG_NETDEV_1000 is not set
+# CONFIG_NETDEV_10000 is not set
+# CONFIG_WLAN is not set
+# CONFIG_INPUT_KEYBOARD is not set
+# CONFIG_INPUT_MOUSE is not set
+# CONFIG_SERIO_I8042 is not set
+CONFIG_VT_HW_CONSOLE_BINDING=y
+CONFIG_SERIAL_8250=y
+CONFIG_SERIAL_8250_CONSOLE=y
+# CONFIG_HW_RANDOM is not set
+# CONFIG_HWMON is not set
+# CONFIG_MFD_SUPPORT is not set
+CONFIG_FB=y
+CONFIG_FB_CIRRUS=y
+# CONFIG_VGA_CONSOLE is not set
+# CONFIG_HID_SUPPORT is not set
+# CONFIG_USB_SUPPORT is not set
+CONFIG_EXT2_FS=y
+CONFIG_EXT3_FS=y
+CONFIG_QUOTA=y
+CONFIG_PROC_KCORE=y
+CONFIG_TMPFS=y
+CONFIG_NFS_FS=y
+CONFIG_NFS_V3=y
+CONFIG_ROOT_NFS=y
+# CONFIG_RCU_CPU_STALL_DETECTOR is not set

diff --git a/board/qemu/mipsel-malta/readme.txt b/board/qemu/mipsel-malta/readme.txt
index 52d424d01bb8a0628312eb91c15962e71f9436c0..1e17828138908ce406b10695bd822f97fe334c06 100644 (file)
--- a/board/qemu/mipsel-malta/readme.txt
+++ b/board/qemu/mipsel-malta/readme.txt
@@ -6,4 +6,4 @@ The login prompt will appear in the terminal that started Qemu. The
 graphical window is the framebuffer. No keyboard support has been
 enabled.
 
-Tested with QEMU 1.5.2
+Tested with QEMU 1.6.0

diff --git a/board/qemu/powerpc-g3beige/linux-3.10.config b/board/qemu/powerpc-g3beige/linux-3.10.config
deleted file mode 100644 (file)
index 098dae3..0000000
--- a/board/qemu/powerpc-g3beige/linux-3.10.config
+++ /dev/null
@@ -1,86 +0,0 @@
-CONFIG_ALTIVEC=y
-CONFIG_EXPERIMENTAL=y
-CONFIG_SWAP=y
-CONFIG_SYSVIPC=y
-CONFIG_BLK_DEV_INITRD=y
-CONFIG_COMPAT_BRK=y
-CONFIG_SLAB=y
-CONFIG_LBDAF=y
-CONFIG_PPC_PMAC=y
-CONFIG_PPC_OF_BOOT_TRAMPOLINE=y
-CONFIG_PPC601_SYNC_FIX=y
-CONFIG_HIGHMEM=y
-CONFIG_NO_HZ=y
-CONFIG_BINFMT_ELF=y
-CONFIG_PROC_DEVICETREE=y
-CONFIG_PM=y
-CONFIG_SECCOMP=y
-CONFIG_PCCARD=y
-CONFIG_PCMCIA=y
-CONFIG_PCMCIA_LOAD_CIS=y
-CONFIG_PCMCIA_IOCTL=y
-CONFIG_YENTA=y
-CONFIG_ADVANCED_OPTIONS=y
-CONFIG_NET=y
-CONFIG_PACKET=y
-CONFIG_PACKET_MMAP=y
-CONFIG_UNIX=y
-CONFIG_INET=y
-CONFIG_INET_LRO=y
-CONFIG_PREVENT_FIRMWARE_BUILD=y
-CONFIG_FIRMWARE_IN_KERNEL=y
-CONFIG_CONNECTOR=y
-CONFIG_PROC_EVENTS=y
-CONFIG_BLK_DEV=y
-CONFIG_BLK_DEV_LOOP=y
-CONFIG_IDE=y
-CONFIG_IDE_GD=y
-CONFIG_IDE_GD_ATA=y
-CONFIG_BLK_DEV_IDECD=y
-CONFIG_IDE_PROC_FS=y
-CONFIG_BLK_DEV_CMD64X=y
-CONFIG_BLK_DEV_IDE_PMAC=y
-CONFIG_IEEE1394=y
-CONFIG_IEEE1394_OHCI1394=y
-CONFIG_IEEE1394_ETH1394=y
-CONFIG_IEEE1394_RAWIO=y
-CONFIG_IEEE1394_VIDEO1394=y
-CONFIG_IEEE1394_DV1394=y
-CONFIG_MACINTOSH_DRIVERS=y
-CONFIG_ADB=y
-CONFIG_ADB_CUDA=y
-CONFIG_ADB_PMU=y
-CONFIG_NETDEVICES=y
-CONFIG_NET_ETHERNET=y
-CONFIG_MACE=y
-CONFIG_BMAC=y
-CONFIG_HAPPYMEAL=y
-CONFIG_SUNGEM=y
-CONFIG_CASSINI=y
-CONFIG_NET_PCI=y
-CONFIG_PCNET32=y
-CONFIG_NE2K_PCI=y
-CONFIG_8139CP=y
-CONFIG_8139TOO=y
-CONFIG_8139TOO_PIO=y
-CONFIG_SERIO=y
-CONFIG_SERIAL_PMACZILOG=y
-CONFIG_SERIAL_PMACZILOG_TTYS=y
-CONFIG_SERIAL_PMACZILOG_CONSOLE=y
-CONFIG_HW_RANDOM=y
-CONFIG_SSB=y
-CONFIG_SSB_PCIHOST=y
-CONFIG_SSB_PCMCIAHOST=y
-CONFIG_SSB_DRIVER_PCICORE=y
-CONFIG_EXT2_FS=y
-CONFIG_EXT3_FS=y
-CONFIG_DNOTIFY=y
-CONFIG_INOTIFY=y
-CONFIG_INOTIFY_USER=y
-CONFIG_PROC_KCORE=y
-CONFIG_TMPFS=y
-CONFIG_MISC_FILESYSTEMS=y
-CONFIG_SQUASHFS=y
-CONFIG_LIBCRC32C=y
-CONFIG_BOOTX_TEXT=y
-CONFIG_CRYPTO_HW=y

diff --git a/board/qemu/powerpc-g3beige/linux-3.11.config b/board/qemu/powerpc-g3beige/linux-3.11.config
new file mode 100644 (file)
index 0000000..098dae3
--- /dev/null
+++ b/board/qemu/powerpc-g3beige/linux-3.11.config
@@ -0,0 +1,86 @@
+CONFIG_ALTIVEC=y
+CONFIG_EXPERIMENTAL=y
+CONFIG_SWAP=y
+CONFIG_SYSVIPC=y
+CONFIG_BLK_DEV_INITRD=y
+CONFIG_COMPAT_BRK=y
+CONFIG_SLAB=y
+CONFIG_LBDAF=y
+CONFIG_PPC_PMAC=y
+CONFIG_PPC_OF_BOOT_TRAMPOLINE=y
+CONFIG_PPC601_SYNC_FIX=y
+CONFIG_HIGHMEM=y
+CONFIG_NO_HZ=y
+CONFIG_BINFMT_ELF=y
+CONFIG_PROC_DEVICETREE=y
+CONFIG_PM=y
+CONFIG_SECCOMP=y
+CONFIG_PCCARD=y
+CONFIG_PCMCIA=y
+CONFIG_PCMCIA_LOAD_CIS=y
+CONFIG_PCMCIA_IOCTL=y
+CONFIG_YENTA=y
+CONFIG_ADVANCED_OPTIONS=y
+CONFIG_NET=y
+CONFIG_PACKET=y
+CONFIG_PACKET_MMAP=y
+CONFIG_UNIX=y
+CONFIG_INET=y
+CONFIG_INET_LRO=y
+CONFIG_PREVENT_FIRMWARE_BUILD=y
+CONFIG_FIRMWARE_IN_KERNEL=y
+CONFIG_CONNECTOR=y
+CONFIG_PROC_EVENTS=y
+CONFIG_BLK_DEV=y
+CONFIG_BLK_DEV_LOOP=y
+CONFIG_IDE=y
+CONFIG_IDE_GD=y
+CONFIG_IDE_GD_ATA=y
+CONFIG_BLK_DEV_IDECD=y
+CONFIG_IDE_PROC_FS=y
+CONFIG_BLK_DEV_CMD64X=y
+CONFIG_BLK_DEV_IDE_PMAC=y
+CONFIG_IEEE1394=y
+CONFIG_IEEE1394_OHCI1394=y
+CONFIG_IEEE1394_ETH1394=y
+CONFIG_IEEE1394_RAWIO=y
+CONFIG_IEEE1394_VIDEO1394=y
+CONFIG_IEEE1394_DV1394=y
+CONFIG_MACINTOSH_DRIVERS=y
+CONFIG_ADB=y
+CONFIG_ADB_CUDA=y
+CONFIG_ADB_PMU=y
+CONFIG_NETDEVICES=y
+CONFIG_NET_ETHERNET=y
+CONFIG_MACE=y
+CONFIG_BMAC=y
+CONFIG_HAPPYMEAL=y
+CONFIG_SUNGEM=y
+CONFIG_CASSINI=y
+CONFIG_NET_PCI=y
+CONFIG_PCNET32=y
+CONFIG_NE2K_PCI=y
+CONFIG_8139CP=y
+CONFIG_8139TOO=y
+CONFIG_8139TOO_PIO=y
+CONFIG_SERIO=y
+CONFIG_SERIAL_PMACZILOG=y
+CONFIG_SERIAL_PMACZILOG_TTYS=y
+CONFIG_SERIAL_PMACZILOG_CONSOLE=y
+CONFIG_HW_RANDOM=y
+CONFIG_SSB=y
+CONFIG_SSB_PCIHOST=y
+CONFIG_SSB_PCMCIAHOST=y
+CONFIG_SSB_DRIVER_PCICORE=y
+CONFIG_EXT2_FS=y
+CONFIG_EXT3_FS=y
+CONFIG_DNOTIFY=y
+CONFIG_INOTIFY=y
+CONFIG_INOTIFY_USER=y
+CONFIG_PROC_KCORE=y
+CONFIG_TMPFS=y
+CONFIG_MISC_FILESYSTEMS=y
+CONFIG_SQUASHFS=y
+CONFIG_LIBCRC32C=y
+CONFIG_BOOTX_TEXT=y
+CONFIG_CRYPTO_HW=y

diff --git a/board/qemu/powerpc-g3beige/readme.txt b/board/qemu/powerpc-g3beige/readme.txt
index b5c73a4d0e929bb736a1bbd9907f757eea31c322..4c0bf8a3a42b9d9d46b0a6020e12d878116a5213 100644 (file)
--- a/board/qemu/powerpc-g3beige/readme.txt
+++ b/board/qemu/powerpc-g3beige/readme.txt
@@ -1,8 +1,8 @@
 Run the emulation with:
 
-  qemu-system-ppc -M g3beige -kernel output/images/vmlinux -hda output/images/rootfs.ext2 -append "console=ttyS0 root=/dev/hdc" -serial stdio -net nic,model=rtl8139 -net user
+  qemu-system-ppc -M g3beige -kernel output/images/vmlinux -hda output/images/rootfs.ext2 -append "console=ttyS0 root=/dev/hda" -serial stdio -net nic,model=rtl8139 -net user
 
 The login prompt will appear in the terminal that started Qemu. The
 graphical window is the framebuffer.
 
-Tested with QEMU 1.5.2
+Tested with QEMU 1.6.0

diff --git a/board/qemu/powerpc-mpc8544ds/readme.txt b/board/qemu/powerpc-mpc8544ds/readme.txt
index dfe1ac25912d17b8f67ba1f55a738b7a5d0c0cfe..8c57eadec9e7b0cd71c77091379bfa944773a616 100644 (file)
--- a/board/qemu/powerpc-mpc8544ds/readme.txt
+++ b/board/qemu/powerpc-mpc8544ds/readme.txt
@@ -4,4 +4,4 @@ Run the emulation with:
 
 The login prompt will appear in the terminal that started Qemu.
 
-Tested with QEMU 1.5.2
+Tested with QEMU 1.6.0

diff --git a/board/qemu/powerpc-virtex-ml507/readme.txt b/board/qemu/powerpc-virtex-ml507/readme.txt
index f4bc5d5519cab594ea4618921a283ffa3af7f752..e958d494baa5e099f944c0cbb62abee07a99ada8 100644 (file)
--- a/board/qemu/powerpc-virtex-ml507/readme.txt
+++ b/board/qemu/powerpc-virtex-ml507/readme.txt
@@ -5,4 +5,4 @@ Run the emulation with:
 
 The login prompt will appear in the terminal that started Qemu.
 
-Tested with QEMU 1.5.2
+Tested with QEMU 1.6.0

diff --git a/board/qemu/sh4-r2d/readme.txt b/board/qemu/sh4-r2d/readme.txt
index 34f4857e11831cd296c7e3f9ff5a63410565e705..45fca86d7983dff92224f445e088cc5181264b1c 100644 (file)
--- a/board/qemu/sh4-r2d/readme.txt
+++ b/board/qemu/sh4-r2d/readme.txt
@@ -5,4 +5,4 @@ Run the emulation with:
 The login prompt will appear in the terminal that started Qemu.
 The graphical window is the framebuffer.
 
-Tested with QEMU 1.5.2
+Tested with QEMU 1.6.0

diff --git a/board/qemu/sparc-ss10/readme.txt b/board/qemu/sparc-ss10/readme.txt
index 8f4b5bec761a4d50966f17e615bc807aa5a9dfe4..dab4028122fbb6056509901d0b96da7afad93959 100644 (file)
--- a/board/qemu/sparc-ss10/readme.txt
+++ b/board/qemu/sparc-ss10/readme.txt
@@ -5,4 +5,4 @@ Run the emulation with:
 The login prompt will appear in the terminal that started Qemu.
 The graphical window is the framebuffer.
 
-Tested with QEMU 1.5.2
+Tested with QEMU 1.6.0

diff --git a/board/qemu/x86/linux-3.10.config b/board/qemu/x86/linux-3.10.config
deleted file mode 100644 (file)
index 5bf6944..0000000
--- a/board/qemu/x86/linux-3.10.config
+++ /dev/null
@@ -1,67 +0,0 @@
-CONFIG_EXPERIMENTAL=y
-# CONFIG_LOCALVERSION_AUTO is not set
-# CONFIG_SWAP is not set
-# CONFIG_COMPAT_BRK is not set
-# CONFIG_BLK_DEV_BSG is not set
-# CONFIG_IOSCHED_DEADLINE is not set
-# CONFIG_IOSCHED_CFQ is not set
-# CONFIG_X86_EXTENDED_PLATFORM is not set
-# CONFIG_SCHED_OMIT_FRAME_POINTER is not set
-# CONFIG_MTRR_SANITIZER is not set
-# CONFIG_SECCOMP is not set
-# CONFIG_RELOCATABLE is not set
-CONFIG_NET=y
-CONFIG_PACKET=y
-CONFIG_UNIX=y
-CONFIG_INET=y
-CONFIG_IP_PNP=y
-# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
-# CONFIG_INET_XFRM_MODE_TUNNEL is not set
-# CONFIG_INET_XFRM_MODE_BEET is not set
-# CONFIG_INET_LRO is not set
-# CONFIG_INET_DIAG is not set
-# CONFIG_IPV6 is not set
-# CONFIG_WIRELESS is not set
-# CONFIG_PREVENT_FIRMWARE_BUILD is not set
-# CONFIG_FIRMWARE_IN_KERNEL is not set
-# CONFIG_BLK_DEV is not set
-CONFIG_BLK_DEV_SD=y
-CONFIG_ATA=y
-CONFIG_ATA_PIIX=y
-CONFIG_NETDEVICES=y
-CONFIG_NET_ETHERNET=y
-CONFIG_NET_PCI=y
-CONFIG_NE2K_PCI=y
-CONFIG_8139CP=y
-# CONFIG_NETDEV_1000 is not set
-# CONFIG_NETDEV_10000 is not set
-# CONFIG_WLAN is not set
-# CONFIG_INPUT_MOUSEDEV_PSAUX is not set
-# CONFIG_INPUT_MOUSE is not set
-# CONFIG_SERIO_SERPORT is not set
-# CONFIG_LEGACY_PTYS is not set
-# CONFIG_DEVKMEM is not set
-CONFIG_SERIAL_8250=y
-CONFIG_SERIAL_8250_CONSOLE=y
-# CONFIG_HW_RANDOM is not set
-# CONFIG_HWMON is not set
-# CONFIG_MFD_SUPPORT is not set
-CONFIG_SOUND=y
-CONFIG_SND=y
-CONFIG_SND_HDA_INTEL=y
-# CONFIG_HID_SUPPORT is not set
-# CONFIG_USB_SUPPORT is not set
-# CONFIG_X86_PLATFORM_DEVICES is not set
-# CONFIG_DMIID is not set
-CONFIG_EXT2_FS=y
-# CONFIG_DNOTIFY is not set
-# CONFIG_INOTIFY_USER is not set
-# CONFIG_MISC_FILESYSTEMS is not set
-CONFIG_NFS_FS=y
-CONFIG_ROOT_NFS=y
-# CONFIG_ENABLE_WARN_DEPRECATED is not set
-# CONFIG_ENABLE_MUST_CHECK is not set
-# CONFIG_UNUSED_SYMBOLS is not set
-# CONFIG_FRAME_POINTER is not set
-# CONFIG_X86_VERBOSE_BOOTUP is not set
-# CONFIG_VIRTUALIZATION is not set

diff --git a/board/qemu/x86/linux-3.11.config b/board/qemu/x86/linux-3.11.config
new file mode 100644 (file)
index 0000000..5bf6944
--- /dev/null
+++ b/board/qemu/x86/linux-3.11.config
@@ -0,0 +1,67 @@
+CONFIG_EXPERIMENTAL=y
+# CONFIG_LOCALVERSION_AUTO is not set
+# CONFIG_SWAP is not set
+# CONFIG_COMPAT_BRK is not set
+# CONFIG_BLK_DEV_BSG is not set
+# CONFIG_IOSCHED_DEADLINE is not set
+# CONFIG_IOSCHED_CFQ is not set
+# CONFIG_X86_EXTENDED_PLATFORM is not set
+# CONFIG_SCHED_OMIT_FRAME_POINTER is not set
+# CONFIG_MTRR_SANITIZER is not set
+# CONFIG_SECCOMP is not set
+# CONFIG_RELOCATABLE is not set
+CONFIG_NET=y
+CONFIG_PACKET=y
+CONFIG_UNIX=y
+CONFIG_INET=y
+CONFIG_IP_PNP=y
+# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
+# CONFIG_INET_XFRM_MODE_TUNNEL is not set
+# CONFIG_INET_XFRM_MODE_BEET is not set
+# CONFIG_INET_LRO is not set
+# CONFIG_INET_DIAG is not set
+# CONFIG_IPV6 is not set
+# CONFIG_WIRELESS is not set
+# CONFIG_PREVENT_FIRMWARE_BUILD is not set
+# CONFIG_FIRMWARE_IN_KERNEL is not set
+# CONFIG_BLK_DEV is not set
+CONFIG_BLK_DEV_SD=y
+CONFIG_ATA=y
+CONFIG_ATA_PIIX=y
+CONFIG_NETDEVICES=y
+CONFIG_NET_ETHERNET=y
+CONFIG_NET_PCI=y
+CONFIG_NE2K_PCI=y
+CONFIG_8139CP=y
+# CONFIG_NETDEV_1000 is not set
+# CONFIG_NETDEV_10000 is not set
+# CONFIG_WLAN is not set
+# CONFIG_INPUT_MOUSEDEV_PSAUX is not set
+# CONFIG_INPUT_MOUSE is not set
+# CONFIG_SERIO_SERPORT is not set
+# CONFIG_LEGACY_PTYS is not set
+# CONFIG_DEVKMEM is not set
+CONFIG_SERIAL_8250=y
+CONFIG_SERIAL_8250_CONSOLE=y
+# CONFIG_HW_RANDOM is not set
+# CONFIG_HWMON is not set
+# CONFIG_MFD_SUPPORT is not set
+CONFIG_SOUND=y
+CONFIG_SND=y
+CONFIG_SND_HDA_INTEL=y
+# CONFIG_HID_SUPPORT is not set
+# CONFIG_USB_SUPPORT is not set
+# CONFIG_X86_PLATFORM_DEVICES is not set
+# CONFIG_DMIID is not set
+CONFIG_EXT2_FS=y
+# CONFIG_DNOTIFY is not set
+# CONFIG_INOTIFY_USER is not set
+# CONFIG_MISC_FILESYSTEMS is not set
+CONFIG_NFS_FS=y
+CONFIG_ROOT_NFS=y
+# CONFIG_ENABLE_WARN_DEPRECATED is not set
+# CONFIG_ENABLE_MUST_CHECK is not set
+# CONFIG_UNUSED_SYMBOLS is not set
+# CONFIG_FRAME_POINTER is not set
+# CONFIG_X86_VERBOSE_BOOTUP is not set
+# CONFIG_VIRTUALIZATION is not set

diff --git a/board/qemu/x86/readme.txt b/board/qemu/x86/readme.txt
index 7bc3a1c31766bedcbbc95a3d65f6891ec1043f62..5f3af40421fdbf918c7bc215eee8f0d9f7cbb692 100644 (file)
--- a/board/qemu/x86/readme.txt
+++ b/board/qemu/x86/readme.txt
@@ -4,4 +4,4 @@ Run the emulation with:
 
 The login prompt will appear in the graphical window.
 
-Tested with QEMU 1.5.2
+Tested with QEMU 1.6.0

diff --git a/board/qemu/x86_64/linux-3.10.config b/board/qemu/x86_64/linux-3.10.config
deleted file mode 100644 (file)
index 5bf6944..0000000
--- a/board/qemu/x86_64/linux-3.10.config
+++ /dev/null
@@ -1,67 +0,0 @@
-CONFIG_EXPERIMENTAL=y
-# CONFIG_LOCALVERSION_AUTO is not set
-# CONFIG_SWAP is not set
-# CONFIG_COMPAT_BRK is not set
-# CONFIG_BLK_DEV_BSG is not set
-# CONFIG_IOSCHED_DEADLINE is not set
-# CONFIG_IOSCHED_CFQ is not set
-# CONFIG_X86_EXTENDED_PLATFORM is not set
-# CONFIG_SCHED_OMIT_FRAME_POINTER is not set
-# CONFIG_MTRR_SANITIZER is not set
-# CONFIG_SECCOMP is not set
-# CONFIG_RELOCATABLE is not set
-CONFIG_NET=y
-CONFIG_PACKET=y
-CONFIG_UNIX=y
-CONFIG_INET=y
-CONFIG_IP_PNP=y
-# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
-# CONFIG_INET_XFRM_MODE_TUNNEL is not set
-# CONFIG_INET_XFRM_MODE_BEET is not set
-# CONFIG_INET_LRO is not set
-# CONFIG_INET_DIAG is not set
-# CONFIG_IPV6 is not set
-# CONFIG_WIRELESS is not set
-# CONFIG_PREVENT_FIRMWARE_BUILD is not set
-# CONFIG_FIRMWARE_IN_KERNEL is not set
-# CONFIG_BLK_DEV is not set
-CONFIG_BLK_DEV_SD=y
-CONFIG_ATA=y
-CONFIG_ATA_PIIX=y
-CONFIG_NETDEVICES=y
-CONFIG_NET_ETHERNET=y
-CONFIG_NET_PCI=y
-CONFIG_NE2K_PCI=y
-CONFIG_8139CP=y
-# CONFIG_NETDEV_1000 is not set
-# CONFIG_NETDEV_10000 is not set
-# CONFIG_WLAN is not set
-# CONFIG_INPUT_MOUSEDEV_PSAUX is not set
-# CONFIG_INPUT_MOUSE is not set
-# CONFIG_SERIO_SERPORT is not set
-# CONFIG_LEGACY_PTYS is not set
-# CONFIG_DEVKMEM is not set
-CONFIG_SERIAL_8250=y
-CONFIG_SERIAL_8250_CONSOLE=y
-# CONFIG_HW_RANDOM is not set
-# CONFIG_HWMON is not set
-# CONFIG_MFD_SUPPORT is not set
-CONFIG_SOUND=y
-CONFIG_SND=y
-CONFIG_SND_HDA_INTEL=y
-# CONFIG_HID_SUPPORT is not set
-# CONFIG_USB_SUPPORT is not set
-# CONFIG_X86_PLATFORM_DEVICES is not set
-# CONFIG_DMIID is not set
-CONFIG_EXT2_FS=y
-# CONFIG_DNOTIFY is not set
-# CONFIG_INOTIFY_USER is not set
-# CONFIG_MISC_FILESYSTEMS is not set
-CONFIG_NFS_FS=y
-CONFIG_ROOT_NFS=y
-# CONFIG_ENABLE_WARN_DEPRECATED is not set
-# CONFIG_ENABLE_MUST_CHECK is not set
-# CONFIG_UNUSED_SYMBOLS is not set
-# CONFIG_FRAME_POINTER is not set
-# CONFIG_X86_VERBOSE_BOOTUP is not set
-# CONFIG_VIRTUALIZATION is not set

diff --git a/board/qemu/x86_64/linux-3.11.config b/board/qemu/x86_64/linux-3.11.config
new file mode 100644 (file)
index 0000000..5bf6944
--- /dev/null
+++ b/board/qemu/x86_64/linux-3.11.config
@@ -0,0 +1,67 @@
+CONFIG_EXPERIMENTAL=y
+# CONFIG_LOCALVERSION_AUTO is not set
+# CONFIG_SWAP is not set
+# CONFIG_COMPAT_BRK is not set
+# CONFIG_BLK_DEV_BSG is not set
+# CONFIG_IOSCHED_DEADLINE is not set
+# CONFIG_IOSCHED_CFQ is not set
+# CONFIG_X86_EXTENDED_PLATFORM is not set
+# CONFIG_SCHED_OMIT_FRAME_POINTER is not set
+# CONFIG_MTRR_SANITIZER is not set
+# CONFIG_SECCOMP is not set
+# CONFIG_RELOCATABLE is not set
+CONFIG_NET=y
+CONFIG_PACKET=y
+CONFIG_UNIX=y
+CONFIG_INET=y
+CONFIG_IP_PNP=y
+# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
+# CONFIG_INET_XFRM_MODE_TUNNEL is not set
+# CONFIG_INET_XFRM_MODE_BEET is not set
+# CONFIG_INET_LRO is not set
+# CONFIG_INET_DIAG is not set
+# CONFIG_IPV6 is not set
+# CONFIG_WIRELESS is not set
+# CONFIG_PREVENT_FIRMWARE_BUILD is not set
+# CONFIG_FIRMWARE_IN_KERNEL is not set
+# CONFIG_BLK_DEV is not set
+CONFIG_BLK_DEV_SD=y
+CONFIG_ATA=y
+CONFIG_ATA_PIIX=y
+CONFIG_NETDEVICES=y
+CONFIG_NET_ETHERNET=y
+CONFIG_NET_PCI=y
+CONFIG_NE2K_PCI=y
+CONFIG_8139CP=y
+# CONFIG_NETDEV_1000 is not set
+# CONFIG_NETDEV_10000 is not set
+# CONFIG_WLAN is not set
+# CONFIG_INPUT_MOUSEDEV_PSAUX is not set
+# CONFIG_INPUT_MOUSE is not set
+# CONFIG_SERIO_SERPORT is not set
+# CONFIG_LEGACY_PTYS is not set
+# CONFIG_DEVKMEM is not set
+CONFIG_SERIAL_8250=y
+CONFIG_SERIAL_8250_CONSOLE=y
+# CONFIG_HW_RANDOM is not set
+# CONFIG_HWMON is not set
+# CONFIG_MFD_SUPPORT is not set
+CONFIG_SOUND=y
+CONFIG_SND=y
+CONFIG_SND_HDA_INTEL=y
+# CONFIG_HID_SUPPORT is not set
+# CONFIG_USB_SUPPORT is not set
+# CONFIG_X86_PLATFORM_DEVICES is not set
+# CONFIG_DMIID is not set
+CONFIG_EXT2_FS=y
+# CONFIG_DNOTIFY is not set
+# CONFIG_INOTIFY_USER is not set
+# CONFIG_MISC_FILESYSTEMS is not set
+CONFIG_NFS_FS=y
+CONFIG_ROOT_NFS=y
+# CONFIG_ENABLE_WARN_DEPRECATED is not set
+# CONFIG_ENABLE_MUST_CHECK is not set
+# CONFIG_UNUSED_SYMBOLS is not set
+# CONFIG_FRAME_POINTER is not set
+# CONFIG_X86_VERBOSE_BOOTUP is not set
+# CONFIG_VIRTUALIZATION is not set

diff --git a/board/qemu/x86_64/readme.txt b/board/qemu/x86_64/readme.txt
index b6f4659a6c6ea098253c0a3221daed24bf806a3c..d9eaf5622946def7807b2c3d53bbbde876d2b118 100644 (file)
--- a/board/qemu/x86_64/readme.txt
+++ b/board/qemu/x86_64/readme.txt
@@ -4,4 +4,4 @@ Run the emulation with:
 
 The login prompt will appear in the graphical window.
 
-Tested with QEMU 1.5.2
+Tested with QEMU 1.6.0

diff --git a/configs/qemu_mips64_malta_defconfig b/configs/qemu_mips64_malta_defconfig
index 61abdcf47d7f9cc37f9f1d572dd4c5d3f9cb8584..035cfa1be7227dffbf0f3ede2efa30206728b4b6 100644 (file)
--- a/configs/qemu_mips64_malta_defconfig
+++ b/configs/qemu_mips64_malta_defconfig
@@ -10,16 +10,16 @@ BR2_PREFER_STATIC_LIB=y
 BR2_TARGET_ROOTFS_EXT2=y
 # BR2_TARGET_ROOTFS_TAR is not set
 
-# Lock to 3.10 headers to avoid breaking with newer kernels
+# Lock to 3.11 headers to avoid breaking with newer kernels
 BR2_KERNEL_HEADERS_VERSION=y
-BR2_DEFAULT_KERNEL_VERSION="3.10.7"
+BR2_DEFAULT_KERNEL_VERSION="3.11.3"
 
 # Kernel
 BR2_LINUX_KERNEL=y
 BR2_LINUX_KERNEL_CUSTOM_VERSION=y
-BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="3.10.7"
+BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="3.11.3"
 BR2_LINUX_KERNEL_USE_CUSTOM_CONFIG=y
-BR2_LINUX_KERNEL_CUSTOM_CONFIG_FILE="board/qemu/mips64-malta/linux-3.10.config"
+BR2_LINUX_KERNEL_CUSTOM_CONFIG_FILE="board/qemu/mips64-malta/linux-3.11.config"
 BR2_LINUX_KERNEL_VMLINUX=y
 
 # Serial port config

diff --git a/configs/qemu_sparc_ss10_defconfig b/configs/qemu_sparc_ss10_defconfig
index 33f0b213b1c2e53010012839b03dac277f39ec3b..ad1b136e72a0be204d32241b02686fc949f17623 100644 (file)
--- a/configs/qemu_sparc_ss10_defconfig
+++ b/configs/qemu_sparc_ss10_defconfig
@@ -6,13 +6,13 @@ BR2_sparc_v8=y
 BR2_TARGET_ROOTFS_EXT2=y
 # BR2_TARGET_ROOTFS_TAR is not set
 
-# Lock to 3.7 headers to avoid breaking with newer kernels
+# Lock to 3.11 headers to avoid breaking with newer kernels
 BR2_KERNEL_HEADERS_VERSION=y
-BR2_DEFAULT_KERNEL_VERSION="3.7.10"
+BR2_DEFAULT_KERNEL_VERSION="3.11.3"
 
 # Linux kernel
 BR2_LINUX_KERNEL=y
 BR2_LINUX_KERNEL_CUSTOM_VERSION=y
-BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="3.7.10"
+BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="3.11.3"
 BR2_LINUX_KERNEL_DEFCONFIG="sparc32"
 BR2_LINUX_KERNEL_ZIMAGE=y