IA MCU processor name is lakemont, not lakemount.
gcc/
* config.gcc (x86_archs): Replace lakemount with lakemont.
(with_cpu): Likewise.
(with_arch): Likewise.
* config/i386/i386-c.c (ix86_target_macros_internal): Replace
PROCESSOR_LAKEMOUNT with PROCESSOR_LAKEMONT. Replace
__tune_lakemount__ with __tune_lakemont__.
* config/i386/i386.c (lakemount_cost): Renamed to ...
(lakemont_cost): This.
(m_LAKEMOUNT): Renamed to ...
(m_LAKEMONT): This.
(initial_ix86_arch_features): Replace m_LAKEMOUNT with m_LAKEMONT.
(processor_target_table): Replace "lakemount" with "lakemont".
(processor_alias_table): Likewise.
(ix86_issue_rate): Replace PROCESSOR_LAKEMOUNT with
PROCESSOR_LAKEMONT.
(ix86_adjust_cost): Likewise.
(ia32_multipass_dfa_lookahead): Likewise.
* config/i386/i386.h (processor_type): Likewise.
* config/i386/x86-tune.def: Replace m_LAKEMOUNT with m_LAKEMONT.
* doc/invoke.texi: Replace lakemount with lakemont. Replace
Lakemount with Lakemont.
gcc/testsuite/
* gcc.target/i386/pr66749.c (dg-options): Replace
-mtune=lakemount with -mtune=lakemont.
* gcc.target/i386/pr66821.c (dg-options): Likewise.
* gcc.target/i386/pr67329.c (dg-options): Likewise.
From-SVN: r228115
+2015-09-25 H.J. Lu <hongjiu.lu@intel.com>
+
+ * config.gcc (x86_archs): Replace lakemount with lakemont.
+ (with_cpu): Likewise.
+ (with_arch): Likewise.
+ * config/i386/i386-c.c (ix86_target_macros_internal): Replace
+ PROCESSOR_LAKEMOUNT with PROCESSOR_LAKEMONT. Replace
+ __tune_lakemount__ with __tune_lakemont__.
+ * config/i386/i386.c (lakemount_cost): Renamed to ...
+ (lakemont_cost): This.
+ (m_LAKEMOUNT): Renamed to ...
+ (m_LAKEMONT): This.
+ (initial_ix86_arch_features): Replace m_LAKEMOUNT with m_LAKEMONT.
+ (processor_target_table): Replace "lakemount" with "lakemont".
+ (processor_alias_table): Likewise.
+ (ix86_issue_rate): Replace PROCESSOR_LAKEMOUNT with
+ PROCESSOR_LAKEMONT.
+ (ix86_adjust_cost): Likewise.
+ (ia32_multipass_dfa_lookahead): Likewise.
+ * config/i386/i386.h (processor_type): Likewise.
+ * config/i386/x86-tune.def: Replace m_LAKEMOUNT with m_LAKEMONT.
+ * doc/invoke.texi: Replace lakemount with lakemont. Replace
+ Lakemount with Lakemont.
+
2015-09-24 H.J. Lu <hongjiu.lu@intel.com>
* config.gcc (x86_archs): Replace iamcu with lakemount.
x86_archs="athlon athlon-4 athlon-fx athlon-mp athlon-tbird \
athlon-xp k6 k6-2 k6-3 geode c3 c3-2 winchip-c6 winchip2 i386 i486 \
i586 i686 pentium pentium-m pentium-mmx pentium2 pentium3 pentium3m \
-pentium4 pentium4m pentiumpro prescott lakemount"
+pentium4 pentium4m pentiumpro prescott lakemont"
# 64-bit x86 processors supported by --with-arch=. Each processor
# MUST be separated by exactly one space.
if test x$with_cpu = x ; then
case ${target} in
i[34567]86-*-elfiamcu)
- with_cpu=lakemount
+ with_cpu=lakemont
;;
i[34567]86-*-*|x86_64-*-*)
with_cpu=$cpu
# and TARGET_SUBTARGET64_ISA_DEFAULT in config/i386/darwin.h.
;;
i[34567]86-*-elfiamcu)
- with_arch=lakemount
+ with_arch=lakemont
;;
i[34567]86-*-*)
# --with-fpmath sets the default ISA to SSE2, which is the same
def_or_undef (parse_in, "__i486");
def_or_undef (parse_in, "__i486__");
break;
- case PROCESSOR_LAKEMOUNT:
+ case PROCESSOR_LAKEMONT:
/* Intel MCU is based on Intel Pentium CPU. */
case PROCESSOR_PENTIUM:
def_or_undef (parse_in, "__i586");
case PROCESSOR_SKYLAKE_AVX512:
def_or_undef (parse_in, "__tune_skylake_avx512__");
break;
- case PROCESSOR_LAKEMOUNT:
- def_or_undef (parse_in, "__tune_lakemount__");
+ case PROCESSOR_LAKEMONT:
+ def_or_undef (parse_in, "__tune_lakemont__");
break;
case PROCESSOR_INTEL:
case PROCESSOR_GENERIC:
};
static const
-struct processor_costs lakemount_cost = {
+struct processor_costs lakemont_cost = {
COSTS_N_INSNS (1), /* cost of an add instruction */
COSTS_N_INSNS (1) + 1, /* cost of a lea instruction */
COSTS_N_INSNS (1), /* variable shift costs */
#define m_386 (1<<PROCESSOR_I386)
#define m_486 (1<<PROCESSOR_I486)
#define m_PENT (1<<PROCESSOR_PENTIUM)
-#define m_LAKEMOUNT (1<<PROCESSOR_LAKEMOUNT)
+#define m_LAKEMONT (1<<PROCESSOR_LAKEMONT)
#define m_PPRO (1<<PROCESSOR_PENTIUMPRO)
#define m_PENT4 (1<<PROCESSOR_PENTIUM4)
#define m_NOCONA (1<<PROCESSOR_NOCONA)
ix86_arch_features based on the processor mask. */
static unsigned int initial_ix86_arch_features[X86_ARCH_LAST] = {
/* X86_ARCH_CMOV: Conditional move was added for pentiumpro. */
- ~(m_386 | m_486 | m_PENT | m_LAKEMOUNT | m_K6),
+ ~(m_386 | m_486 | m_PENT | m_LAKEMONT | m_K6),
/* X86_ARCH_CMPXCHG: Compare and exchange was added for 80486. */
~m_386,
{"i386", &i386_cost, 4, 3, 4, 3, 4},
{"i486", &i486_cost, 16, 15, 16, 15, 16},
{"pentium", &pentium_cost, 16, 7, 16, 7, 16},
- {"lakemount", &lakemount_cost, 16, 7, 16, 7, 16},
+ {"lakemont", &lakemont_cost, 16, 7, 16, 7, 16},
{"pentiumpro", &pentiumpro_cost, 16, 15, 16, 10, 16},
{"pentium4", &pentium4_cost, 0, 0, 0, 0, 0},
{"nocona", &nocona_cost, 0, 0, 0, 0, 0},
{"i486", PROCESSOR_I486, CPU_NONE, 0},
{"i586", PROCESSOR_PENTIUM, CPU_PENTIUM, 0},
{"pentium", PROCESSOR_PENTIUM, CPU_PENTIUM, 0},
- {"lakemount", PROCESSOR_LAKEMOUNT, CPU_PENTIUM, 0},
+ {"lakemont", PROCESSOR_LAKEMONT, CPU_PENTIUM, 0},
{"pentium-mmx", PROCESSOR_PENTIUM, CPU_PENTIUM, PTA_MMX},
{"winchip-c6", PROCESSOR_I486, CPU_NONE, PTA_MMX},
{"winchip2", PROCESSOR_I486, CPU_NONE, PTA_MMX | PTA_3DNOW | PTA_PRFCHW},
switch (ix86_tune)
{
case PROCESSOR_PENTIUM:
- case PROCESSOR_LAKEMOUNT:
+ case PROCESSOR_LAKEMONT:
case PROCESSOR_BONNELL:
case PROCESSOR_SILVERMONT:
case PROCESSOR_KNL:
switch (ix86_tune)
{
case PROCESSOR_PENTIUM:
- case PROCESSOR_LAKEMOUNT:
+ case PROCESSOR_LAKEMONT:
/* Address Generation Interlock adds a cycle of latency. */
if (insn_type == TYPE_LEA)
{
switch (ix86_tune)
{
case PROCESSOR_PENTIUM:
- case PROCESSOR_LAKEMOUNT:
+ case PROCESSOR_LAKEMONT:
return 2;
case PROCESSOR_PENTIUMPRO:
PROCESSOR_I386, /* 80386 */
PROCESSOR_I486, /* 80486DX, 80486SX, 80486DX[24] */
PROCESSOR_PENTIUM,
- PROCESSOR_LAKEMOUNT,
+ PROCESSOR_LAKEMONT,
PROCESSOR_PENTIUMPRO,
PROCESSOR_PENTIUM4,
PROCESSOR_NOCONA,
/* X86_TUNE_SCHEDULE: Enable scheduling. */
DEF_TUNE (X86_TUNE_SCHEDULE, "schedule",
- m_PENT | m_LAKEMOUNT | m_PPRO | m_CORE_ALL | m_BONNELL | m_SILVERMONT
+ m_PENT | m_LAKEMONT | m_PPRO | m_CORE_ALL | m_BONNELL | m_SILVERMONT
| m_INTEL | m_KNL | m_K6_GEODE | m_AMD_MULTIPLE | m_GENERIC)
/* X86_TUNE_PARTIAL_REG_DEPENDENCY: Enable more register renaming
/* X86_TUNE_SINGLE_PUSH: Enable if single push insn is preferred
over esp subtraction. */
DEF_TUNE (X86_TUNE_SINGLE_PUSH, "single_push", m_386 | m_486 | m_PENT
- | m_LAKEMOUNT | m_K6_GEODE)
+ | m_LAKEMONT | m_K6_GEODE)
/* X86_TUNE_DOUBLE_PUSH. Enable if double push insn is preferred
over esp subtraction. */
-DEF_TUNE (X86_TUNE_DOUBLE_PUSH, "double_push", m_PENT | m_LAKEMOUNT
+DEF_TUNE (X86_TUNE_DOUBLE_PUSH, "double_push", m_PENT | m_LAKEMONT
| m_K6_GEODE)
/* X86_TUNE_SINGLE_POP: Enable if single pop insn is preferred
over esp addition. */
DEF_TUNE (X86_TUNE_SINGLE_POP, "single_pop", m_386 | m_486 | m_PENT
- | m_LAKEMOUNT | m_PPRO)
+ | m_LAKEMONT | m_PPRO)
/* X86_TUNE_DOUBLE_POP: Enable if double pop insn is preferred
over esp addition. */
-DEF_TUNE (X86_TUNE_DOUBLE_POP, "double_pop", m_PENT | m_LAKEMOUNT)
+DEF_TUNE (X86_TUNE_DOUBLE_POP, "double_pop", m_PENT | m_LAKEMONT)
/*****************************************************************************/
/* Branch predictor tuning */
/* X86_TUNE_READ_MODIFY: Enable use of read-modify instructions such
as "add mem, reg". */
-DEF_TUNE (X86_TUNE_READ_MODIFY, "read_modify", ~(m_PENT | m_LAKEMOUNT | m_PPRO))
+DEF_TUNE (X86_TUNE_READ_MODIFY, "read_modify", ~(m_PENT | m_LAKEMONT | m_PPRO))
/* X86_TUNE_USE_INCDEC: Enable use of inc/dec instructions. */
DEF_TUNE (X86_TUNE_USE_INCDEC, "use_incdec",
/* X86_TUNE_USE_CLTD: Controls use of CLTD and CTQO instructions. */
DEF_TUNE (X86_TUNE_USE_CLTD, "use_cltd",
- ~(m_PENT | m_LAKEMOUNT | m_BONNELL | m_SILVERMONT | m_KNL | m_INTEL
+ ~(m_PENT | m_LAKEMONT | m_BONNELL | m_SILVERMONT | m_KNL | m_INTEL
| m_K6))
/* X86_TUNE_USE_BT: Enable use of BT (bit test) instructions. */
/* X86_TUNE_USE_SIMODE_FIOP: Enables use of x87 instructions with 32bit
integer operand. */
DEF_TUNE (X86_TUNE_USE_SIMODE_FIOP, "use_simode_fiop",
- ~(m_PENT | m_LAKEMOUNT | m_PPRO | m_CORE_ALL | m_BONNELL
+ ~(m_PENT | m_LAKEMONT | m_PPRO | m_CORE_ALL | m_BONNELL
| m_SILVERMONT | m_KNL | m_INTEL | m_AMD_MULTIPLE | m_GENERIC))
/* X86_TUNE_USE_FFREEP: Use freep instruction instead of fstp. */
/* X86_TUNE_ZERO_EXTEND_WITH_AND: Use AND instruction instead
of mozbl/movwl. */
DEF_TUNE (X86_TUNE_ZERO_EXTEND_WITH_AND, "zero_extend_with_and",
- m_486 | m_PENT | m_LAKEMOUNT)
+ m_486 | m_PENT | m_LAKEMONT)
/* X86_TUNE_PROMOTE_HIMODE_IMUL: Modern CPUs have same latency for HImode
and SImode multiply, but 386 and 486 do HImode multiply faster. */
into 16bit/8bit when resulting sequence is shorter. For example
for "and $-65536, reg" to 16bit store of 0. */
DEF_TUNE (X86_TUNE_FAST_PREFIX, "fast_prefix",
- ~(m_386 | m_486 | m_PENT | m_LAKEMOUNT))
+ ~(m_386 | m_486 | m_PENT | m_LAKEMONT))
/* X86_TUNE_READ_MODIFY_WRITE: Enable use of read modify write instructions
such as "add $1, mem". */
DEF_TUNE (X86_TUNE_READ_MODIFY_WRITE, "read_modify_write",
- ~(m_PENT | m_LAKEMOUNT))
+ ~(m_PENT | m_LAKEMONT))
/* X86_TUNE_MOVE_M1_VIA_OR: On pentiums, it is faster to load -1 via OR
than a MOV. */
-DEF_TUNE (X86_TUNE_MOVE_M1_VIA_OR, "move_m1_via_or", m_PENT | m_LAKEMOUNT)
+DEF_TUNE (X86_TUNE_MOVE_M1_VIA_OR, "move_m1_via_or", m_PENT | m_LAKEMONT)
/* X86_TUNE_NOT_UNPAIRABLE: NOT is not pairable on Pentium, while XOR is,
but one byte longer. */
-DEF_TUNE (X86_TUNE_NOT_UNPAIRABLE, "not_unpairable", m_PENT | m_LAKEMOUNT)
+DEF_TUNE (X86_TUNE_NOT_UNPAIRABLE, "not_unpairable", m_PENT | m_LAKEMONT)
/* X86_TUNE_PARTIAL_REG_STALL: Pentium pro, unlike later chips, handled
use of partial registers by renaming. This improved performance of 16bit
@itemx pentium
Intel Pentium CPU with no MMX support.
-@item lakemount
-Intel Lakemount MCU, based on Intel Pentium CPU.
+@item lakemont
+Intel Lakemont MCU, based on Intel Pentium CPU.
@item pentium-mmx
Intel Pentium MMX CPU, based on Pentium core with MMX instruction set support.
+2015-09-25 H.J. Lu <hongjiu.lu@intel.com>
+
+ * gcc.target/i386/pr66749.c (dg-options): Replace
+ -mtune=lakemount with -mtune=lakemont.
+ * gcc.target/i386/pr66821.c (dg-options): Likewise.
+ * gcc.target/i386/pr67329.c (dg-options): Likewise.
+
2015-09-25 Marek Polacek <polacek@redhat.com>
* c-c++-common/ubsan/bounds-11.c: New test.
/* { dg-do compile } */
/* { dg-require-effective-target ia32 } */
/* { dg-require-effective-target nonpic } */
-/* { dg-options "-O2 -miamcu -mtune=lakemount" } */
+/* { dg-options "-O2 -miamcu -mtune=lakemont" } */
char a[10], b[10];
/* { dg-do compile { target ia32 } } */
-/* { dg-options "-O2 -fdump-tree-optimized -mtune=lakemount" } */
+/* { dg-options "-O2 -fdump-tree-optimized -mtune=lakemont" } */
void bar (void);
/* { dg-do compile { target ia32 } } */
-/* { dg-options "-O3 -fno-tree-fre -fno-tree-pre -fdump-tree-optimized -mtune=lakemount" } */
+/* { dg-options "-O3 -fno-tree-fre -fno-tree-pre -fdump-tree-optimized -mtune=lakemont" } */
int
foo ()