struct target_expmed *this_target_expmed = &default_target_expmed;
#endif
+static bool store_integral_bit_field (rtx, opt_scalar_int_mode,
+ unsigned HOST_WIDE_INT,
+ unsigned HOST_WIDE_INT,
+ unsigned HOST_WIDE_INT,
+ unsigned HOST_WIDE_INT,
+ machine_mode, rtx, bool, bool);
static void store_fixed_bit_field (rtx, opt_scalar_int_mode,
unsigned HOST_WIDE_INT,
unsigned HOST_WIDE_INT,
}
/* Return true if OP is a memory and if a bitfield of size BITSIZE at
- bit number BITNUM can be treated as a simple value of mode MODE. */
+ bit number BITNUM can be treated as a simple value of mode MODE.
+ Store the byte offset in *BYTENUM if so. */
static bool
-simple_mem_bitfield_p (rtx op0, unsigned HOST_WIDE_INT bitsize,
- unsigned HOST_WIDE_INT bitnum, machine_mode mode)
+simple_mem_bitfield_p (rtx op0, poly_uint64 bitsize, poly_uint64 bitnum,
+ machine_mode mode, poly_uint64 *bytenum)
{
return (MEM_P (op0)
- && bitnum % BITS_PER_UNIT == 0
- && bitsize == GET_MODE_BITSIZE (mode)
+ && multiple_p (bitnum, BITS_PER_UNIT, bytenum)
+ && known_eq (bitsize, GET_MODE_BITSIZE (mode))
&& (!targetm.slow_unaligned_access (mode, MEM_ALIGN (op0))
- || (bitnum % GET_MODE_ALIGNMENT (mode) == 0
+ || (multiple_p (bitnum, GET_MODE_ALIGNMENT (mode))
&& MEM_ALIGN (op0) >= GET_MODE_ALIGNMENT (mode))));
}
\f
return false instead. */
static bool
-store_bit_field_1 (rtx str_rtx, unsigned HOST_WIDE_INT bitsize,
- unsigned HOST_WIDE_INT bitnum,
+store_bit_field_1 (rtx str_rtx, poly_uint64 bitsize, poly_uint64 bitnum,
unsigned HOST_WIDE_INT bitregion_start,
unsigned HOST_WIDE_INT bitregion_end,
machine_mode fieldmode,
rtx value, bool reverse, bool fallback_p)
{
rtx op0 = str_rtx;
- rtx orig_value;
while (GET_CODE (op0) == SUBREG)
{
/* No action is needed if the target is a register and if the field
lies completely outside that register. This can occur if the source
code contains an out-of-bounds access to a small array. */
- if (REG_P (op0) && bitnum >= GET_MODE_BITSIZE (GET_MODE (op0)))
+ if (REG_P (op0) && known_ge (bitnum, GET_MODE_BITSIZE (GET_MODE (op0))))
return true;
/* Use vec_set patterns for inserting parts of vectors whenever
available. */
machine_mode outermode = GET_MODE (op0);
scalar_mode innermode = GET_MODE_INNER (outermode);
+ poly_uint64 pos;
if (VECTOR_MODE_P (outermode)
&& !MEM_P (op0)
&& optab_handler (vec_set_optab, outermode) != CODE_FOR_nothing
&& fieldmode == innermode
- && bitsize == GET_MODE_BITSIZE (innermode)
- && !(bitnum % GET_MODE_BITSIZE (innermode)))
+ && known_eq (bitsize, GET_MODE_BITSIZE (innermode))
+ && multiple_p (bitnum, GET_MODE_BITSIZE (innermode), &pos))
{
struct expand_operand ops[3];
enum insn_code icode = optab_handler (vec_set_optab, outermode);
- int pos = bitnum / GET_MODE_BITSIZE (innermode);
create_fixed_operand (&ops[0], op0);
create_input_operand (&ops[1], value, innermode);
/* If the target is a register, overwriting the entire object, or storing
a full-word or multi-word field can be done with just a SUBREG. */
if (!MEM_P (op0)
- && bitsize == GET_MODE_BITSIZE (fieldmode)
- && ((bitsize == GET_MODE_BITSIZE (GET_MODE (op0)) && bitnum == 0)
- || (bitsize % BITS_PER_WORD == 0 && bitnum % BITS_PER_WORD == 0)))
+ && known_eq (bitsize, GET_MODE_BITSIZE (fieldmode)))
{
/* Use the subreg machinery either to narrow OP0 to the required
words or to cope with mode punning between equal-sized modes.
In the latter case, use subreg on the rhs side, not lhs. */
rtx sub;
-
- if (bitsize == GET_MODE_BITSIZE (GET_MODE (op0)))
+ HOST_WIDE_INT regnum;
+ HOST_WIDE_INT regsize = REGMODE_NATURAL_SIZE (GET_MODE (op0));
+ if (known_eq (bitnum, 0U)
+ && known_eq (bitsize, GET_MODE_BITSIZE (GET_MODE (op0))))
{
sub = simplify_gen_subreg (GET_MODE (op0), value, fieldmode, 0);
if (sub)
return true;
}
}
- else
+ else if (constant_multiple_p (bitnum, regsize * BITS_PER_UNIT, ®num)
+ && multiple_p (bitsize, regsize * BITS_PER_UNIT))
{
sub = simplify_gen_subreg (fieldmode, op0, GET_MODE (op0),
- bitnum / BITS_PER_UNIT);
+ regnum * regsize);
if (sub)
{
if (reverse)
/* If the target is memory, storing any naturally aligned field can be
done with a simple store. For targets that support fast unaligned
memory, any naturally sized, unit aligned field can be done directly. */
- if (simple_mem_bitfield_p (op0, bitsize, bitnum, fieldmode))
+ poly_uint64 bytenum;
+ if (simple_mem_bitfield_p (op0, bitsize, bitnum, fieldmode, &bytenum))
{
- op0 = adjust_bitfield_address (op0, fieldmode, bitnum / BITS_PER_UNIT);
+ op0 = adjust_bitfield_address (op0, fieldmode, bytenum);
if (reverse)
value = flip_storage_order (fieldmode, value);
emit_move_insn (op0, value);
return true;
}
+ /* It's possible we'll need to handle other cases here for
+ polynomial bitnum and bitsize. */
+
+ /* From here on we need to be looking at a fixed-size insertion. */
+ unsigned HOST_WIDE_INT ibitsize = bitsize.to_constant ();
+ unsigned HOST_WIDE_INT ibitnum = bitnum.to_constant ();
+
/* Make sure we are playing with integral modes. Pun with subregs
if we aren't. This must come after the entire register case above,
since that case is valid for any mode. The following cases are only
op0 = gen_lowpart (op0_mode.require (), op0);
}
+ return store_integral_bit_field (op0, op0_mode, ibitsize, ibitnum,
+ bitregion_start, bitregion_end,
+ fieldmode, value, reverse, fallback_p);
+}
+
+/* Subroutine of store_bit_field_1, with the same arguments, except
+ that BITSIZE and BITNUM are constant. Handle cases specific to
+ integral modes. If OP0_MODE is defined, it is the mode of OP0,
+ otherwise OP0 is a BLKmode MEM. */
+
+static bool
+store_integral_bit_field (rtx op0, opt_scalar_int_mode op0_mode,
+ unsigned HOST_WIDE_INT bitsize,
+ unsigned HOST_WIDE_INT bitnum,
+ unsigned HOST_WIDE_INT bitregion_start,
+ unsigned HOST_WIDE_INT bitregion_end,
+ machine_mode fieldmode,
+ rtx value, bool reverse, bool fallback_p)
+{
/* Storing an lsb-aligned field in a register
can be done with a movstrict instruction. */
if (!MEM_P (op0)
&& !reverse
- && lowpart_bit_field_p (bitnum, bitsize, GET_MODE (op0))
+ && lowpart_bit_field_p (bitnum, bitsize, op0_mode.require ())
&& bitsize == GET_MODE_BITSIZE (fieldmode)
&& optab_handler (movstrict_optab, fieldmode) != CODE_FOR_nothing)
{
subwords to extract. Note that fieldmode will often (always?) be
VOIDmode, because that is what store_field uses to indicate that this
is a bit field, but passing VOIDmode to operand_subword_force
- is not allowed. */
- fieldmode = GET_MODE (value);
- if (fieldmode == VOIDmode)
- fieldmode = smallest_int_mode_for_size (nwords * BITS_PER_WORD);
+ is not allowed.
+
+ The mode must be fixed-size, since insertions into variable-sized
+ objects are meant to be handled before calling this function. */
+ fixed_size_mode value_mode = as_a <fixed_size_mode> (GET_MODE (value));
+ if (value_mode == VOIDmode)
+ value_mode = smallest_int_mode_for_size (nwords * BITS_PER_WORD);
last = get_last_insn ();
for (i = 0; i < nwords; i++)
/* If I is 0, use the low-order word in both field and target;
if I is 1, use the next to lowest word; and so on. */
unsigned int wordnum = (backwards
- ? GET_MODE_SIZE (fieldmode) / UNITS_PER_WORD
+ ? GET_MODE_SIZE (value_mode) / UNITS_PER_WORD
- i - 1
: i);
unsigned int bit_offset = (backwards ^ reverse
* BITS_PER_WORD,
0)
: (int) i * BITS_PER_WORD);
- rtx value_word = operand_subword_force (value, wordnum, fieldmode);
+ rtx value_word = operand_subword_force (value, wordnum, value_mode);
unsigned HOST_WIDE_INT new_bitsize =
MIN (BITS_PER_WORD, bitsize - i * BITS_PER_WORD);
integer of the corresponding size. This can occur on a machine
with 64 bit registers that uses SFmode for float. It can also
occur for unaligned float or complex fields. */
- orig_value = value;
+ rtx orig_value = value;
scalar_int_mode value_mode;
if (GET_MODE (value) == VOIDmode)
/* By this point we've dealt with values that are bigger than a word,
If REVERSE is true, the store is to be done in reverse order. */
void
-store_bit_field (rtx str_rtx, unsigned HOST_WIDE_INT bitsize,
- unsigned HOST_WIDE_INT bitnum,
+store_bit_field (rtx str_rtx, poly_uint64 bitsize, poly_uint64 bitnum,
unsigned HOST_WIDE_INT bitregion_start,
unsigned HOST_WIDE_INT bitregion_end,
machine_mode fieldmode,
rtx value, bool reverse)
{
/* Handle -fstrict-volatile-bitfields in the cases where it applies. */
+ unsigned HOST_WIDE_INT ibitsize = 0, ibitnum = 0;
scalar_int_mode int_mode;
- if (is_a <scalar_int_mode> (fieldmode, &int_mode)
- && strict_volatile_bitfield_p (str_rtx, bitsize, bitnum, int_mode,
+ if (bitsize.is_constant (&ibitsize)
+ && bitnum.is_constant (&ibitnum)
+ && is_a <scalar_int_mode> (fieldmode, &int_mode)
+ && strict_volatile_bitfield_p (str_rtx, ibitsize, ibitnum, int_mode,
bitregion_start, bitregion_end))
{
/* Storing of a full word can be done with a simple store.
We know here that the field can be accessed with one single
instruction. For targets that support unaligned memory,
an unaligned access may be necessary. */
- if (bitsize == GET_MODE_BITSIZE (int_mode))
+ if (ibitsize == GET_MODE_BITSIZE (int_mode))
{
str_rtx = adjust_bitfield_address (str_rtx, int_mode,
- bitnum / BITS_PER_UNIT);
+ ibitnum / BITS_PER_UNIT);
if (reverse)
value = flip_storage_order (int_mode, value);
- gcc_assert (bitnum % BITS_PER_UNIT == 0);
+ gcc_assert (ibitnum % BITS_PER_UNIT == 0);
emit_move_insn (str_rtx, value);
}
else
{
rtx temp;
- str_rtx = narrow_bit_field_mem (str_rtx, int_mode, bitsize, bitnum,
- &bitnum);
- gcc_assert (bitnum + bitsize <= GET_MODE_BITSIZE (int_mode));
+ str_rtx = narrow_bit_field_mem (str_rtx, int_mode, ibitsize,
+ ibitnum, &ibitnum);
+ gcc_assert (ibitnum + ibitsize <= GET_MODE_BITSIZE (int_mode));
temp = copy_to_reg (str_rtx);
- if (!store_bit_field_1 (temp, bitsize, bitnum, 0, 0,
+ if (!store_bit_field_1 (temp, ibitsize, ibitnum, 0, 0,
int_mode, value, reverse, true))
gcc_unreachable ();
{
scalar_int_mode best_mode;
machine_mode addr_mode = VOIDmode;
- HOST_WIDE_INT offset, size;
+ HOST_WIDE_INT offset;
gcc_assert ((bitregion_start % BITS_PER_UNIT) == 0);
offset = bitregion_start / BITS_PER_UNIT;
bitnum -= bitregion_start;
- size = (bitnum + bitsize + BITS_PER_UNIT - 1) / BITS_PER_UNIT;
+ poly_int64 size = bits_to_bytes_round_up (bitnum + bitsize);
bitregion_end -= bitregion_start;
bitregion_start = 0;
- if (get_best_mode (bitsize, bitnum,
- bitregion_start, bitregion_end,
- MEM_ALIGN (str_rtx), INT_MAX,
- MEM_VOLATILE_P (str_rtx), &best_mode))
+ if (bitsize.is_constant (&ibitsize)
+ && bitnum.is_constant (&ibitnum)
+ && get_best_mode (ibitsize, ibitnum,
+ bitregion_start, bitregion_end,
+ MEM_ALIGN (str_rtx), INT_MAX,
+ MEM_VOLATILE_P (str_rtx), &best_mode))
addr_mode = best_mode;
str_rtx = adjust_bitfield_address_size (str_rtx, addr_mode,
offset, size);
/* Extraction of a full MODE1 value can be done with a load as long as
the field is on a byte boundary and is sufficiently aligned. */
- if (simple_mem_bitfield_p (op0, bitsize, bitnum, mode1))
+ poly_uint64 bytenum;
+ if (simple_mem_bitfield_p (op0, bitsize, bitnum, mode1, &bytenum))
{
- op0 = adjust_bitfield_address (op0, mode1, bitnum / BITS_PER_UNIT);
+ op0 = adjust_bitfield_address (op0, mode1, bytenum);
if (reverse)
op0 = flip_storage_order (mode1, op0);
return convert_extracted_bit_field (op0, mode, tmode, unsignedp);
projects / gcc.git / commitdiff