Running any program twice on Windows current results in GDB crashing:
$ gdb -q any_program
(gdb) run
$ gdb dummy -batch -ex run -ex run
[New Thread 684960.0xe5878]
[New Thread 684960.0xd75ac]
[New Thread 684960.0xddac8]
[New Thread 684960.0xc1f50]
[Thread 684960.0xd75ac exited with code 0]
[Thread 684960.0xddac8 exited with code 0]
[Thread 684960.0xc1f50 exited with code 0]
[Inferior 1 (process 684960) exited normally]
(gdb) run
Segmentation fault
The crash happens while processing the CREATE_PROCESS_DEBUG_EVENT
for the second run; in particular, we have in get_windows_debug_event:
| case CREATE_PROCESS_DEBUG_EVENT:
| [...]
| if (main_thread_id)
| windows_delete_thread (ptid_t (current_event.dwProcessId, 0,
| main_thread_id),
| 0);
The problem is that main_thread_id is the TID of the main thread from
the *previous* inferior, and this code is trying to delete that
thread. The problem is that it is constructing a PTID by pairing
the TID of the previous inferior with the PID of the new inferior.
As a result, when we dig inside windows_delete_thread to see
how it would handle that, we see...
| delete_thread (find_thread_ptid (ptid));
Since the PTID is bogus, we end up calling delete_thread with
a NULL thread_info. It used to be harmless, turning the delete_thread
into a nop, but the following change...
| commit
080363310650c93ad8e93018bcb6760ba5d32d1c
| Date: Thu Nov 22 16:09:14 2018 +0000
| Subject: Per-inferior thread list, thread ranges/iterators, down with ALL_THREADS, etc.
... changed delete_thread to get the list of threads from
the inferior, which itself is now accessed via the given
thread_info. This is the corresponding diff that shows the change:
| - for (tp = thread_list; tp; tpprev = tp, tp = tp->next)
| + for (tp = thr->inf->thread_list; tp; tpprev = tp, tp = tp->next)
As a result of this, passing a NULL thread_info is no longer
an option!
Stepping back a bit, the reason behind deleting the thread late
could be found in a patch from Dec 2003, which laconically explains:
| commit
87a45c96062d658ca83b50aa060a648bf5f5f1ff
| Date: Fri Dec 26 00:39:04 2003 +0000
|
| * win32-nat.c (get_child_debug_event): Keep main thread id around
| even after thread exits since Windows insists on continuing to
| report events against it.
A look at the gdb-patches archives did not provide any additional
clues (https://www.sourceware.org/ml/gdb-patches/2003-12/msg00478.html).
It is not clear whether this is still needed or not. This patch
assumes that whatever isue there was, the versions of Windows
we currently support no longer have it.
With that in mind, this commit fixes the issue by deleting the thread
when the inferior sends the exit-process event as opposed to deleting it
later, while starting a new inferior.
This also restores the printing of the thread-exit notification for
the main thread, which was missing before. Looking at the transcript
of the example shown above, we can see 4 thread creation notifications,
and only 3 notifications for thread exits. Now creation and exit
notifications are balanced.
In the handling of EXIT_THREAD_DEBUG_EVENT, the main_thread_id
check is removed because deemed unnecessary: The main thread was
introduced by a CREATE_PROCESS_DEBUG_EVENT, and thus the kernel
is expected to report its death via EXIT_PROCESS_DEBUG_EVENT.
And finally, because the behavior of delete_thread did change
(albeit when getting a value we probably never expected to receive),
this patch also adds a gdb_assert. The purpose is to provide some
immediate information in case there are other callers that mistakenly
call delete_thread with a NULL thread info. This can be useful
information when direct debugging of GDB isn't an option.
gdb/ChangeLog:
* thread.c (delete_thread_1): Add gdb_assert that THR is not
NULL. Initialize tpprev to NULL instead of assigning it
to NULL on the next statement.
* windows-nat.c (windows_delete_thread): Remove check for
main_thread_id before printing thread exit notifications.
(get_windows_debug_event) <EXIT_THREAD_DEBUG_EVENT>:
Remove thread ID check against main_thread_id.
<CREATE_PROCESS_DEBUG_EVENT>: Remove call to
windows_delete_thread.
<EXIT_PROCESS_DEBUG_EVENT>: Add call to windows_delete_thread.
+2019-01-05 Joel Brobecker <brobecker@adacore.com>
+
+ * thread.c (delete_thread_1): Add gdb_assert that THR is not
+ NULL. Initialize tpprev to NULL instead of assigning it
+ to NULL on the next statement.
+ * windows-nat.c (windows_delete_thread): Remove check for
+ main_thread_id before printing thread exit notifications.
+ (get_windows_debug_event) <EXIT_THREAD_DEBUG_EVENT>:
+ Remove thread ID check against main_thread_id.
+ <CREATE_PROCESS_DEBUG_EVENT>: Remove call to
+ windows_delete_thread.
+ <EXIT_PROCESS_DEBUG_EVENT>: Add call to windows_delete_thread.
+
2019-01-04 Tom Tromey <tom@tromey.com>
* compile/compile.c (_initialize_compile): Use upper case for
step_over_chain_remove (&step_over_queue_head, tp);
}
-/* Delete thread TP. If SILENT, don't notify the observer of this
- exit. */
+/* Delete the thread referenced by THR. If SILENT, don't notifyi
+ the observer of this exit.
+
+ THR must not be NULL or a failed assertion will be raised. */
static void
delete_thread_1 (thread_info *thr, bool silent)
{
- struct thread_info *tp, *tpprev;
+ gdb_assert (thr != nullptr);
- tpprev = NULL;
+ struct thread_info *tp, *tpprev = NULL;
for (tp = thr->inf->thread_list; tp; tpprev = tp, tp = tp->next)
if (tp == thr)
if (info_verbose)
printf_unfiltered ("[Deleting %s]\n", target_pid_to_str (ptid));
- else if (print_thread_events && id != main_thread_id)
+ else if (print_thread_events)
printf_unfiltered (_("[%s exited with code %u]\n"),
target_pid_to_str (ptid), (unsigned) exit_code);
delete_thread (find_thread_ptid (ptid));
(unsigned) current_event.dwProcessId,
(unsigned) current_event.dwThreadId,
"EXIT_THREAD_DEBUG_EVENT"));
-
- if (current_event.dwThreadId != main_thread_id)
- {
- windows_delete_thread (ptid_t (current_event.dwProcessId, 0,
- current_event.dwThreadId),
- current_event.u.ExitThread.dwExitCode);
- th = &dummy_thread_info;
- }
+ windows_delete_thread (ptid_t (current_event.dwProcessId, 0,
+ current_event.dwThreadId),
+ current_event.u.ExitThread.dwExitCode);
+ th = &dummy_thread_info;
break;
case CREATE_PROCESS_DEBUG_EVENT:
break;
current_process_handle = current_event.u.CreateProcessInfo.hProcess;
- if (main_thread_id)
- windows_delete_thread (ptid_t (current_event.dwProcessId, 0,
- main_thread_id),
- 0);
main_thread_id = current_event.dwThreadId;
/* Add the main thread. */
th = windows_add_thread (ptid_t (current_event.dwProcessId, 0,
}
else if (saw_create == 1)
{
+ windows_delete_thread (ptid_t (current_event.dwProcessId, 0,
+ main_thread_id),
+ 0);
ourstatus->kind = TARGET_WAITKIND_EXITED;
ourstatus->value.integer = current_event.u.ExitProcess.dwExitCode;
thread_id = main_thread_id;
projects / binutils-gdb.git / commitdiff