"cmple $31,%1,%0"
[(set_attr "type" "icmp")])
+;; This pattern exists so conditional moves of SImode values are handled.
+;; Comparisons are still done in DImode though.
+
+(define_insn ""
+ [(set (match_operand:SI 0 "register_operand" "=r,r,r,r")
+ (if_then_else:DI
+ (match_operator 2 "signed_comparison_operator"
+ [(match_operand:DI 3 "reg_or_0_operand" "rJ,rJ,J,J")
+ (match_operand:DI 4 "reg_or_0_operand" "J,J,rJ,rJ")])
+ (match_operand:SI 1 "reg_or_8bit_operand" "rI,0,rI,0")
+ (match_operand:SI 5 "reg_or_8bit_operand" "0,rI,0,rI")))]
+ "operands[3] == const0_rtx || operands[4] == const0_rtx"
+ "@
+ cmov%C2 %r3,%1,%0
+ cmov%D2 %r3,%5,%0
+ cmov%c2 %r4,%1,%0
+ cmov%d2 %r4,%5,%0")
+
(define_insn ""
[(set (match_operand:DI 0 "register_operand" "=r,r,r,r")
(if_then_else:DI
alpha_compare_op0);
}")
\f
+;; These are the main define_expand's used to make conditional moves.
+
+(define_expand "movsicc"
+ [(set (match_dup 4) (match_operand 1 "comparison_operator" ""))
+ (set (match_operand:SI 0 "register_operand" "")
+ (if_then_else:DI (match_dup 5)
+ (match_operand:SI 2 "reg_or_8bit_operand" "")
+ (match_operand:SI 3 "reg_or_8bit_operand" "")))]
+ ""
+ "
+{
+ rtx op0,op1;
+ enum rtx_code code = GET_CODE (operands[1]);
+
+ if (alpha_compare_fp_p)
+ FAIL;
+ switch (code)
+ {
+ case EQ: case NE: case LE: case LT:
+ op0 = alpha_compare_op0;
+ op1 = alpha_compare_op1;
+ break;
+ case GE:
+ code = LE;
+ op0 = force_reg (DImode, alpha_compare_op1);
+ op1 = alpha_compare_op0;
+ break;
+ case GT:
+ code = LT;
+ op0 = force_reg (DImode, alpha_compare_op1);
+ op1 = alpha_compare_op0;
+ break;
+ default:
+ FAIL;
+ }
+ operands[1] = gen_rtx (code, DImode, op0, op1);
+ operands[4] = gen_reg_rtx (DImode);
+ operands[5] = gen_rtx (NE, VOIDmode, operands[4], CONST0_RTX (DImode));
+}")
+
+(define_expand "movdicc"
+ [(set (match_dup 4) (match_operand 1 "comparison_operator" ""))
+ (set (match_operand:DI 0 "register_operand" "")
+ (if_then_else:DI (match_dup 5)
+ (match_operand:DI 2 "reg_or_8bit_operand" "")
+ (match_operand:DI 3 "reg_or_8bit_operand" "")))]
+ ""
+ "
+{
+ rtx op0,op1;
+ enum rtx_code code = GET_CODE (operands[1]);
+
+ if (alpha_compare_fp_p)
+ FAIL;
+ switch (code)
+ {
+ case EQ: case NE: case LE: case LT:
+ op0 = alpha_compare_op0;
+ op1 = alpha_compare_op1;
+ break;
+ case GE:
+ code = LE;
+ op0 = force_reg (DImode, alpha_compare_op1);
+ op1 = alpha_compare_op0;
+ break;
+ case GT:
+ code = LT;
+ op0 = force_reg (DImode, alpha_compare_op1);
+ op1 = alpha_compare_op0;
+ break;
+ default:
+ FAIL;
+ }
+ operands[1] = gen_rtx (code, DImode, op0, op1);
+ operands[4] = gen_reg_rtx (DImode);
+ operands[5] = gen_rtx (NE, VOIDmode, operands[4], CONST0_RTX (DImode));
+}")
+
+(define_expand "movsfcc"
+ [(set (match_dup 4) (match_operand 1 "comparison_operator" ""))
+ (set (match_operand:SF 0 "register_operand" "")
+ (if_then_else:SF (match_dup 5)
+ (match_operand:SF 2 "reg_or_fp0_operand" "")
+ (match_operand:SF 3 "reg_or_fp0_operand" "")))]
+ ""
+ "
+{
+ rtx op0,op1;
+ enum rtx_code code = GET_CODE (operands[1]), code2 = NE;
+
+ if (!alpha_compare_fp_p)
+ FAIL;
+ switch (code)
+ {
+ case EQ: case LE: case LT:
+ op0 = alpha_compare_op0;
+ op1 = alpha_compare_op1;
+ break;
+ case NE:
+ /* There isn't a cmptne insn. */
+ code = code2 = EQ;
+ op0 = alpha_compare_op0;
+ op1 = alpha_compare_op1;
+ break;
+ case GE:
+ code = LE;
+ op0 = force_reg (DFmode, alpha_compare_op1);
+ op1 = alpha_compare_op0;
+ break;
+ case GT:
+ code = LT;
+ op0 = force_reg (DFmode, alpha_compare_op1);
+ op1 = alpha_compare_op0;
+ break;
+ default:
+ FAIL;
+ }
+ operands[1] = gen_rtx (code, DFmode, op0, op1);
+ operands[4] = gen_reg_rtx (DFmode);
+ operands[5] = gen_rtx (code2, VOIDmode, operands[4], CONST0_RTX (DFmode));
+}")
+
+(define_expand "movdfcc"
+ [(set (match_dup 4) (match_operand 1 "comparison_operator" ""))
+ (set (match_operand:DF 0 "register_operand" "")
+ (if_then_else:DF (match_dup 5)
+ (match_operand:DF 2 "reg_or_fp0_operand" "")
+ (match_operand:DF 3 "reg_or_fp0_operand" "")))]
+ ""
+ "
+{
+ rtx op0,op1;
+ enum rtx_code code = GET_CODE (operands[1]), code2 = NE;
+
+ if (!alpha_compare_fp_p)
+ FAIL;
+ switch (code)
+ {
+ case EQ: case LE: case LT:
+ op0 = alpha_compare_op0;
+ op1 = alpha_compare_op1;
+ break;
+ case NE:
+ /* There isn't a cmptne insn. */
+ code = code2 = EQ;
+ op0 = alpha_compare_op0;
+ op1 = alpha_compare_op1;
+ break;
+ case GE:
+ code = LE;
+ op0 = force_reg (DFmode, alpha_compare_op1);
+ op1 = alpha_compare_op0;
+ break;
+ case GT:
+ code = LT;
+ op0 = force_reg (DFmode, alpha_compare_op1);
+ op1 = alpha_compare_op0;
+ break;
+ default:
+ FAIL;
+ }
+ operands[1] = gen_rtx (code, DFmode, op0, op1);
+ operands[4] = gen_reg_rtx (DFmode);
+ operands[5] = gen_rtx (code2, VOIDmode, operands[4], CONST0_RTX (DFmode));
+}")
+\f
;; These define_split definitions are used in cases when comparisons have
;; not be stated in the correct way and we need to reverse the second
;; comparison. For example, x >= 7 has to be done as x < 6 with the