-Wed May 18 17:04:03 1994 Bill Cox (bill@rtl.cygnus.com)
+Thu May 19 12:51:00 1994 Bill Cox (bill@rtl.cygnus.com)
+
+ * Makefile.in, configure.in, config/mips-gdb.exp,
+ config/mt-a29k-udi, config/mt-i386-aout, config/mt-i960-nindy,
+ config/mt-sparc-aout, config/udi-gdb.exp, config/unix-gdb.exp,
+ config/unknown.exp, gdb.t00/default.exp, gdb.t00/help.exp,,
+ gdb.t00/teststrategy.exp, gdb.t01/Makefile.in, gdb.t02/Makefile.in,
+ gdb.t02/whatis.exp, gdb.t03/Makefile.in, gdb.t03/gdbme.c,
+ gdb.t04/Makefile.in, gdb.t05/Makefile.in, gdb.t06/Makefile.in,
+ gdb.t06/break.exp, gdb.t06/signals.c, gdb.t06/signals.exp,
+ gdb.t08/Makefile.in, gdb.t08/opaque.exp, gdb.t09/Makefile.in,
+ gdb.t10/Makefile.in, gdb.t11/Makefile.in, gdb.t12/Makefile.in,
+ gdb.t13/Makefile.in, gdb.t15/Makefile.in, gdb.t15/funcargs.exp,
+ gdb.t15/gdbme.c, gdb.t15/return.exp, gdb.t16/Makefile.in,
+ gdb.t17/Makefile.in, gdb.t17/callfuncs.exp, gdb.t17/gdbme.c,
+ gdb.t20/Makefile.in, gdb.t21/Makefile.in, gdb.t21/cplusfuncs.exp,
+ gdb.t22/Makefile.in, gdb.t22/virtfunc.exp, gdb.t23/Makefile.in,
+ gdb.t24/demangle.exp, lib/gdb.exp: Check in Rob's testing
+ changes from 94Q1.
+
+Wed May 18 17:04:03 1994 Bill Cox (bill@rtl.cygnus.com),
* config/mt-lynx, config/mt-m68k, config/mt-mips-ecoff,
config/mt-slite, config/mt-unix, config/mt-vxworks: Add
operator[] test with gdb_test because the old code didn't seem to
be getting the quoting right with the new dejagnu.
+Thu Feb 24 19:49:25 1994 Rob Savoye (rob@poseidon.cygnus.com)
+
+ * lib/gdb.exp: Set GDB to a fresh gdb if there is one, else use
+ one from the path.
+ * Makefile.in: Use a fresh expect if there is one, use runtest
+ from the src tree if there is one.
+
Thu Feb 24 18:49:37 1994 Jim Kingdon (kingdon@deneb.cygnus.com)
* gdb.t06/break.exp (test_next_with_recursion): Remove xfail for
"INSTALL_DATA=$(INSTALL_DATA)" \
"LDFLAGS=$(LDFLAGS)" \
"LIBS=$(LIBS)" \
+ "EXPECT=${EXPECT}" \
"RUNTEST=$(RUNTEST)" \
"RUNTESTFLAGS=$(RUNTESTFLAGS)" \
"BISON=$(BISON)"
@echo "# Do not edit here. If you wish to override these values" >> ./tmp0
@echo "# add them to the last section" >> ./tmp0
@echo "set GDBFLAGS \"${GDBFLAGS}\"" >> ./tmp0
- @echo "set host_os ${host_os}" >> ./tmp0
- @echo "set host_alias ${host_alias}" >> ./tmp0
- @echo "set host_cpu ${host_cpu}" >> ./tmp0
- @echo "set host_vendor ${host_vendor}" >> ./tmp0
- @echo "set target_os ${target_os}" >> ./tmp0
- @echo "set target_alias ${target_alias}" >> ./tmp0
- @echo "set target_cpu ${target_cpu}" >> ./tmp0
- @echo "set target_vendor ${target_vendor}" >> ./tmp0
@echo "set host_triplet ${host_canonical}" >> ./tmp0
@echo "set target_triplet ${target_canonical}" >> ./tmp0
@echo "set srcdir ${srcdir}" >> ./tmp0
- @echo "set objdir `pwd`" >> ./tmp0
@echo "set tool gdb" >> ./tmp0
@echo "## All variables above are generated by configure. Do Not Edit ##" >> ./tmp0
@cat ./tmp0 > site.exp
expect {
-re "A program is being debugged already. Kill it\? \(y or n\)" {
send "y\n"
- exp_continue
+ continue -expect
}
-re "Reading symbols from.*done..*$prompt $" { }
-re "$prompt $" { perror "GDB couldn't read file" }
-# compilers and assemblers
-CC = a29k-amd-udi-gcc
-CFLAGS = -g -D${target_os}
-C++ = ${CC}
-C++FLAGS = ${CFLAGS}
-CXX = ${CC}
-CXXFLAGS = ${CFLAGS}
-AS = a29k-amd-udi-as
-ASFLAGS =
-FC =
-FCFLAGS =
-LD = ld
-LDFLAGS =
-LIBS =
-
-# binutils
-
-RANLIB = a29k-amd-udi-ranlib
-RANLIBFLAGS =
-
-NM = a29k-amd-udi-nm
-NMFLAGS =
-
-SIZE = a29k-amd-udi-size
-SIZEFLAGS =
-
-STRIP = a29k-amd-udi-strip
-STRIPFLAGS =
-
-OBJDUMP = a29k-amd-udi-objdump
-OBJDUMPFLAGS =
-
-DEMANGLE = a29k-amd-udi-demangle
-DEMANGLEFLAGS =
-
-COPY = a29k-amd-udi-copy
-COPYFLAGS =
-
-# other utils
-LEX = flex
-LEXFLAGS =
-
-YACC = byacc
-YACCFLAGS =
-
-AR = a29k-amd-udi-ar
-ARFLAGS =
-
-CPP = ${CC} -E
-CPPFLAGS =
-
-GDB = a29k-amd-udi-gdb
-GDBFLAGS = -nx
-
-DIFF = diff
-DIFFFLAGS =
-
-RUNTEST=a29k-amd-udi-runtest
-RUNTESTFLAGS=
+CFLAGS_FOR_TARGET =
-# compilers and assemblers
-CC = i386-aout-gcc
-CFLAGS = -g -D${target_os}
-C++ = ${CC}
-C++FLAGS = ${CFLAGS}
-CXX = ${CC}
-CXXFLAGS = ${CFLAGS}
-AS = i386-aout-as
-ASFLAGS =
-FC =
-FCFLAGS =
-LD = ld
-LDFLAGS =
-LIBS =
-
-# binutils
-
-RANLIB = i386-aout-ranlib
-RANLIBFLAGS =
-
-NM = i386-aout-nm
-NMFLAGS =
-
-SIZE = i386-aout-size
-SIZEFLAGS =
-
-STRIP = i386-aout-strip
-STRIPFLAGS =
-
-OBJDUMP = i386-aout-objdump
-OBJDUMPFLAGS =
-
-DEMANGLE = i386-aout-demangle
-DEMANGLEFLAGS =
-
-COPY = i386-aout-copy
-COPYFLAGS =
-
-# other utils
-LEX = flex
-LEXFLAGS =
-
-YACC = byacc
-YACCFLAGS =
-
-AR = i386-aout-ar
-ARFLAGS =
-
-CPP = ${CC} -E
-CPPFLAGS =
-
-GDB = i386-aout-gdb
-GDBFLAGS = -nx
-
-DIFF = diff
-DIFFFLAGS =
-
-RUNTEST=i386-aout-runtest
-RUNTESTFLAGS=
+CFLAGS_FOR_TARGET =
\ No newline at end of file
-# compilers and assemblers
-CC = i960-intel-nindy-gcc
-CFLAGS = -g -D${target_os}
-C++ = ${CC}
-C++FLAGS = ${CFLAGS}
-CXX = ${CC}
-CXXFLAGS = ${CFLAGS}
-AS = i960-intel-nindy-as
-ASFLAGS =
-FC =
-FCFLAGS =
-LD = ld
-LDFLAGS =
-LIBS =
-
-# binutils
-
-RANLIB = i960-intel-nindy-ranlib
-RANLIBFLAGS =
-
-NM = i960-intel-nindy-nm
-NMFLAGS =
-
-SIZE = i960-intel-nindy-size
-SIZEFLAGS =
-
-STRIP = i960-intel-nindy-strip
-STRIPFLAGS =
-
-OBJDUMP = i960-intel-nindy-objdump
-OBJDUMPFLAGS =
-
-DEMANGLE = i960-intel-nindy-demangle
-DEMANGLEFLAGS =
-
-COPY = i960-intel-nindy-copy
-COPYFLAGS =
-
-# other utils
-LEX = flex
-LEXFLAGS =
-
-YACC = byacc
-YACCFLAGS =
-
-AR = i960-intel-nindy-ar
-ARFLAGS =
-
-CPP = ${CC} -E
-CPPFLAGS =
-
-GDB = i960-intel-nindy-gdb
-GDBFLAGS = -nx
-
-DIFF = diff
-DIFFFLAGS =
-
-RUNTEST=i960-intel-nindy-runtest
-RUNTESTFLAGS=
+CFLAGS_FOR_TARGET = -nostartfiles
-# compilers and assemblers
-CC = sparc-aout-gcc
-CFLAGS = -g -D${target_os}
-C++ = ${CC}
-C++FLAGS = ${CFLAGS}
-CXX = ${CC}
-CXXFLAGS = ${CFLAGS}
-AS = sparc-aout-as
-ASFLAGS =
-FC =
-FCFLAGS =
-LD = ld
-LDFLAGS =
-LIBS =
-
-# binutils
-
-RANLIB = sparc-aout-ranlib
-RANLIBFLAGS =
-
-NM = sparc-aout-nm
-NMFLAGS =
-
-SIZE = sparc-aout-size
-SIZEFLAGS =
-
-STRIP = sparc-aout-strip
-STRIPFLAGS =
-
-OBJDUMP = sparc-aout-objdump
-OBJDUMPFLAGS =
-
-DEMANGLE = sparc-aout-demangle
-DEMANGLEFLAGS =
-
-COPY = sparc-aout-copy
-COPYFLAGS =
-
-# other utils
-LEX = flex
-LEXFLAGS =
-
-YACC = byacc
-YACCFLAGS =
-
-AR = sparc-aout-ar
-ARFLAGS =
-
-CPP = ${CC} -E
-CPPFLAGS =
-
-GDB = sparc-aout-gdb
-GDBFLAGS = -nx
-
-DIFF = diff
-DIFFFLAGS =
-
-RUNTESTFLAGS=sparc-aout-runtest
-RUNTESTFLAGS=
+CFLAGS_FOR_TARGET =
# NOTE: these test assume that there is a udi_soc file in th
#
-# these need to be initialized only if site.exp doesn't set them
-set prompt "\(gdb\)"
-
-if ![info exists prompt] then {
- set prompt "\(gdb\)"
-}
-
load_lib gdb.exp
load_lib udi.exp
gdb_target_udi
}
-#
-# gdb_start -- start GDB running. This assumes that there the
-# UDICONF enviroment variable is set.
-#
proc gdb_start { } {
- global GDB
- global GDBFLAGS
- global spawn_id
- global prompt
- global verbose
-
- set GDB [which $GDB]
- # start GDB
- if [ llength $GDBFLAGS ] then {
- spawn $GDB $GDBFLAGS
- } else {
- spawn $GDB
- }
- expect {
- -re "GDB.*$prompt $" {
- verbose "$GDB initialized for cross mode\n"
- }
- -re "$prompt $" {
- perror "GDB never initialized."
- return -1
- }
- timeout {
- perror "(timeout) GDB never initialized."
- return -1
- }
- }
-
- # force the height to "unlimited", so no pagers get used
- send "set height 0\n"
- expect -re ".*$prompt $" {}
- # force the width to "unlimited", so no wraparound occurs
- send "set width 0\n"
- expect -re ".*$prompt $" {}
-
+ default_gdb_start
verbose "Setting up target, Please wait..."
-
gdb_target_udi
}
return [gdb_file_cmd $arg]
}
-#
-# start gdb -- start gdb running
-#
-
proc gdb_start {} {
- global verbose
- global GDB
- global GDBFLAGS
- global prompt
- global spawn_id
- global timeout
- verbose "Spawning $GDB $GDBFLAGS"
-
- set oldtimeout $timeout
- set timeout [expr "$timeout + 60"]
- if [ llength $GDBFLAGS ] then {
- if {[which $GDB] != 0} then {
- spawn $GDB $GDBFLAGS
- } else {
- perror "$GDB does not exist."
- exit 1
- }
- } else {
- if {[which $GDB] != 0} then {
- spawn $GDB
- } else {
- perror "$GDB does not exist."
- exit 1
- }
- }
- expect {
- -re ".*\r\n$prompt $" {
- verbose "GDB initialized for native mode"
- }
- -re "$prompt $" {
- perror "GDB never initialized."
- return -1
- }
- timeout {
- perror "(timeout) GDB never initialized."
- return -1
- }
- }
- set timeout $oldtimeout
- # force the height to "unlimited", so no pagers get used
- send "set height 0\n"
- expect {
- -re ".*$prompt $" {
- verbose "Setting height to 0." 2
- }
- timeout {
- warning "Couldn't set the height to 0."
- }
- }
- # force the width to "unlimited", so no wraparound occurs
- send "set width 0\n"
- expect {
- -re ".*$prompt $" {
- verbose "Seting width to 0." 2
- }
- timeout {
- warning "Couldn't set the width to 0."
- }
- }
+ default_gdb_start
}
proc gdb_exit { } {
--- /dev/null
+unsupported "Sorry, there is no support for this architecture.\n"
+exit 1
# this section is for all targets
case "${target}" in
-i386-*-aout) target_abbrev=aout ;
- target_makefile_frag=config/mt-i386-aout ;;
-m68*-abug-aout) target_abbrev=abug ;
- target_makefile_frag=config/mt-m68k-abug-aout ;;
-m68*-abug-coff) target_abbrev=abug ;
- target_makefile_frag=config/mt-m68k-abug-coff ;;
-m68*-*-abug) target_abbrev=abug ;
- target_makefile_frag=config/mt-m68k-abug-aout ;;
-m68k-*-coff) target_abbrev=coff ;
- target_makefile_frag=config/mt-m68k-coff ;;
-m68k-*-aout) target_abbrev=aout ;
- target_makefile_frag=config/mt-m68k-aout ;;
-i960-*-nindy) target_abbrev=nind ;
- target_makefile_frag=config/mt-i960-nindy ;;
-m68k-*-vxworks) target_abbrev=vx ;
- target_makefile_frag=config/mt-m68k-vx ;;
-i960-*-vxworks) target_abbrev=vx ;
- target_makefile_frag=config/mt-i960-vx ;;
-a29k-*-udi) target_abbrev=udi ;
- target_makefile_frag=config/mt-a29k-udi ;;
-a29k-isstip-*) target_abbrev=itip ;
- target_makefile_frag=config/mt-a29k-isstip ;;
-mips-idt-ecoff*) target_abbrev=mips ;
- target_makefile_frag=config/mt-mips ;;
+ i386-*-aout) target_makefile_frag=config/mt-i386-aout ;;
+ *-*-lynx) target_makefile_frag=config/mt-lynx ;;
+ *-*-vxworks) target_makefile_frag=config/mt-vxworks ;;
+ m68k-*-*) target_makefile_frag=config/mt-m68k ;;
+ i960-*-nindy) target_makefile_frag=config/mt-i960-nindy ;;
+ a29k-*-udi) target_makefile_frag=config/mt-a29k-udi ;;
+ sparclite-*-*) target_makefile_frag=config/mt-slite ;;
+ sparc-*-aout) target_makefile_frag=config/mt-sparc-aout ;;
+ mips-*-ecoff) target_makefile_frag=config/mt-mips-ecoff ;;
esac
case "${target}" in
# This file was written by Fred Fish. (fnf@cygnus.com)
+# set the prompt if it doesn't exist
+global prompt
+if ![info exists prompt] then {
+ set prompt "\[(\]gdb\[)\]"
+}
+
# Generic gdb subroutines that should work for any target. If these
# need to be modified for any target, it can be done with a variable
# or by passing arguments.
global GDB
if ![info exists GDB] then {
- set GDB [transform gdb]
+ set GDB [findfile $base_dir/../gdb "gdb" [transform gdb ]]
}
global GDBFLAGS
set GDBFLAGS ""
}
-# set the prompt if it doesn't exist
-global prompt
-if ![info exists prompt] then {
- set prompt "\[(\]gdb\[)\]"
-}
-
#
# gdb_version -- extract and print the version number of gcc
#
# This used to be 1 for unix-gdb.exp
set timeout 5
- # We used to try to send "quit" to GDB, and wait for it to die.
- # Dealing with all the cases and errors got pretty hairy. Just close it,
- # that is simpler.
- close
-
- # Omitting this probably would cause strange timing-dependent failures.
+ # this will kill the gdb process, it's cleaner than sending a quit.
+ close
+
+ # Before this was here sometimes "uit" would get sent to the next GDB
+ # (assuming this is immediately followed by gdb_start), which would
+ # cause a loss of syncronization (i.e. all the stuff that swallows a
+ # prompt would swallow the wrong one).
wait
}
}
}
+
+#
+# start gdb -- start gdb running
+#
+proc default_gdb_start { } {
+ global verbose
+ global GDB
+ global GDBFLAGS
+ global prompt
+ global spawn_id
+ global timeout
+ verbose "Spawning $GDB $GDBFLAGS"
+
+ set oldtimeout $timeout
+ set timeout [expr "$timeout + 60"]
+ if [ llength $GDBFLAGS ] then {
+ if {[which $GDB] != 0} then {
+ spawn $GDB $GDBFLAGS
+ } else {
+ perror "$GDB does not exist."
+ exit 1
+ }
+ } else {
+ if {[which $GDB] != 0} then {
+ spawn $GDB
+ } else {
+ perror "$GDB does not exist."
+ exit 1
+ }
+ }
+ expect {
+ -re ".*\r\n$prompt $" {
+ verbose "GDB initialized for native mode"
+ }
+ -re "$prompt $" {
+ perror "GDB never initialized."
+ return -1
+ }
+ timeout {
+ perror "(timeout) GDB never initialized."
+ return -1
+ }
+ }
+ set timeout $oldtimeout
+ # force the height to "unlimited", so no pagers get used
+ send "set height 0\n"
+ expect {
+ -re ".*$prompt $" {
+ verbose "Setting height to 0." 2
+ }
+ timeout {
+ warning "Couldn't set the height to 0."
+ }
+ }
+ # force the width to "unlimited", so no wraparound occurs
+ send "set width 0\n"
+ expect {
+ -re ".*$prompt $" {
+ verbose "Setting width to 0." 2
+ }
+ timeout {
+ warning "Couldn't set the width to 0."
+ }
+ }
+}
+
#
# FIXME: this is a copy of the new library procedure, but it's here too
# till the new dejagnu gets installed everywhere. I'd hate to break the
projects / binutils-gdb.git / commitdiff