+++ /dev/null
-#!/usr/bin/perl
-# Copyright (c) 2001-2005 The Regents of The University of Michigan
-# All rights reserved.
-#
-# Redistribution and use in source and binary forms, with or without
-# modification, are permitted provided that the following conditions are
-# met: redistributions of source code must retain the above copyright
-# notice, this list of conditions and the following disclaimer;
-# redistributions in binary form must reproduce the above copyright
-# notice, this list of conditions and the following disclaimer in the
-# documentation and/or other materials provided with the distribution;
-# neither the name of the copyright holders nor the names of its
-# contributors may be used to endorse or promote products derived from
-# this software without specific prior written permission.
-#
-# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
-# "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
-# LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
-# A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
-# OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
-# SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
-# LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
-# DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
-# THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
-# (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
-# OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
-
-#
-# This script diffs two SimpleScalar statistics output files.
-#
-
-use Getopt::Std;
-
-getopts('adn:t:h');
-
-if ($#ARGV < 1)
-{
- print "\nError: need two file arguments (<reference> <new>).\n";
- print " Options: -d = Ignore distributions\n";
- print " -a = Sort errors alphabetically (default: by percentage)\n";
- print " -h = Diff header info separately from stats\n";
- print " -n <num> = Print top <num> errors (default 20, 0 for all)\n";
- print " -t <num> = Ignore errors below <num> percent (default 0)\n\n";
- exit;
-}
-
-open(REF, "<$ARGV[0]") or die "Error: can't open $ARGV[0].\n";
-open(NEW, "<$ARGV[1]") or die "Error: can't open $ARGV[1].\n";
-
-
-#
-# Things that really should be adjustable via the command line
-#
-
-# Ignorable error (in percent)
-$err_thresh = defined($opt_t) ? $opt_t : 0;
-
-# Number of stats to print before omitting
-$omit_count = defined($opt_n) ? $opt_n : 20;
-
-
-#
-# First copy everything up to the simulation statistics to a pair of
-# temporary files, stripping out date-related items, and do a plain
-# diff. Any differences in the arguments are not necessarily an issue;
-# any differences in the program output should be caught by the EIO
-# mechanism if an EIO file is used.
-#
-
-# copy_header takes input filehandle and output filename
-
-sub copy_header
-{
- my ($inhandle, $outname) = @_;
-
- open(OUTPUT, ">$outname") or die "Error: can't open $outname.\n";
-
- while (<$inhandle>)
- {
- # strip out lines that can vary
- next if /^(command line:|M5 compiled on |M5 simulation started |M5 executing on )/;
- last if /Begin Simulation Statistics/;
- print OUTPUT;
- }
- close OUTPUT;
-}
-
-if ($opt_h) {
-
- # Diff header separately from stats
-
- $refheader = "/tmp/smt-test.refheader.$$";
- $newheader = "/tmp/smt-test.newheader.$$";
-
- copy_header(\*REF, $refheader);
- copy_header(\*NEW, $newheader);
-
- print "\n===== Header and program output differences =====\n\n";
-
- print `diff $refheader $newheader`;
-
- print "\n===== Statistics differences =====\n\n";
-}
-
-#
-# Now parse statistics
-#
-
-#
-# This function takes an open filehandle and returns a reference to
-# a hash containing all the statistics variables and their values.
-#
-sub parse_file
-{
- $stathandle = shift;
-
- $in_dist = undef;
- $hashref = { }; # initialize hash for values
-
- while (<$stathandle>)
- {
- next if /^\s*$/; # skip blank lines
- last if /End Simulation Statistics/;
-
- s/ *#.*//; # strip comments
-
- if (/^Memory usage: (\d+) KBytes/) {
- $stat = 'memory usage';
- $value = $1;
- }
- elsif ($in_dist) {
- if (/(.*)\.end_dist/) {
- # end line of distribution: clear $in_dist flag
- $in_dist = undef;
- next;
- }
- if ($opt_d) {
- next; # bail out if we are ignoring dists...
- } elsif (/(.*)\.(min|max)_value/) {
- # treat these like normal stats
- ($stat, $value) = /^(\S+)\s+(.*)/;
- } else {
- ($stat, $value) =
- /^(\S+(?:.*\S)?)\s+(\d+)\s+\d+\.\d+%/;
- $stat = $in_dist . '::' . $stat;
- }
- }
- else {
- if (/(.*)\.start_dist/) {
- # start line of distribution: set $in_dist flag
- # and save distribution name for future reference
- $in_dist = $1;
- $stat = $1;
- $value = 0;
- }
- else {
- ($stat, $value) = /^(\S+)\s+(.*)/;
- }
- }
-
- $$hashref{$stat} = $value;
- }
-
- close($stathandle);
- return $hashref;
-}
-
-
-#
-# pct_diff($old, $new) returns percent difference from $old to $new.
-#
-sub pct_diff
-{
- my ($old, $new) = @_;
- return ($old == 0) ? (($new == 0) ? 0 : 9999) : 100 * ($new - $old) / $old;
-}
-
-
-#
-# Statistics to ignore: these relate to simulator performance, not
-# correctness, so don't fail on changes here.
-#
-%ignore = (
- 'host_seconds' => 1,
- 'host_tick_rate' => 1,
- 'host_inst_rate' => 1,
- 'host_op_rate' => 1,
- 'host_mem_usage' => 1
-);
-
-#
-# List of key statistics (always displayed)
-# ==> list stats here WITHOUT trailing thread ID
-#
-@key_stat_list = (
- 'ipc',
- 'committedInsts',
- 'committedOps',
- 'sim_insts',
- 'sim_ops',
- 'sim_ticks',
- 'host_inst_rate',
- 'host_mem_usage'
-);
-
-$key_stat_pattern = join('|', @key_stat_list);
-
-# initialize first statistics from each file
-
-$max_err_mag = 0;
-
-$refhash = parse_file(\*REF);
-$newhash = parse_file(\*NEW);
-
-# The string sim-smt prints on a divide by zero
-$divbyzero = '<err: divide by zero>';
-
-foreach $stat (sort keys %$refhash)
-{
- $refvalue = $$refhash{$stat};
- $newvalue = $$newhash{$stat};
-
- if (!defined($newvalue)) {
- # stat missing from new file
- push @missing_stats, $stat;
- next;
- }
-
- if ($stat =~ /($key_stat_pattern)/o) {
- # key statistics: always record & display changes in these
- push @key_stats, [$stat, $refvalue, $newvalue];
- }
-
- if ($ignore{$stat} or $refvalue eq $newvalue) {
- # stat is in "ignore" list, or hasn't changed
- }
- else {
- if ($refvalue eq $divbyzero || $newvalue eq $divbyzero) {
- # one or the other was a divide by zero:
- # no point in trying to quantify error
- print "$stat: $refvalue --> $newvalue\n";
- }
- else {
- $reldiff = pct_diff($refvalue, $newvalue);
- $diffmag = abs($reldiff);
-
- if ($diffmag > $err_thresh) {
- push @errs,
- [$stat, $refvalue, $newvalue, $reldiff];
- }
-
- if ($diffmag > $max_err_mag) {
- $max_err_mag = $diffmag;
- }
- }
- }
-
- # remove from new hash so we can detect added stats
- delete $$newhash{$stat};
-}
-
-
-#
-# All done. Print comparison summary.
-#
-
-printf("Maximum error magnitude: %+f%%\n\n", $max_err_mag);
-
-printf(" %-30s %10s %10s %10s %7s\n", ' ', 'Reference', 'New Value', 'Abs Diff', 'Pct Chg');
-
-printf("Key statistics:\n\n");
-
-foreach $key_stat (@key_stats)
-{
- ($statname, $refvalue, $newvalue, $reldiff) = @$key_stat;
-
- # deduce format from reference value
- $pointpos = rindex($refvalue, '.');
- $digits = ($pointpos < 0) ? 0 :(length($refvalue) - $pointpos - 1);
- $fmt = "%10.${digits}f";
-
- # print differing values with absolute and relative error
- printf(" %-30s $fmt $fmt $fmt %+7.2f%%\n",
- $statname, $refvalue, $newvalue,
- $newvalue - $refvalue, pct_diff($refvalue, $newvalue));
-}
-
-printf("\nDifferences > %d%%:\n\n", $err_thresh);
-
-if ($opt_a) {
- # leave stats sorted alphabetically, doesn't make sense to cut them off
- $omit_count = 0;
-} else {
- # sort differences by percent change
- @errs = sort { abs($$b[3]) <=> abs($$a[3]) } @errs;
-}
-
-$num_errs = 0;
-
-foreach $err (@errs)
-{
- ($statname, $refvalue, $newvalue, $reldiff) = @$err;
-
- # deduce format from reference value
- $pointpos1 = rindex($refvalue, '.');
- $digits1 = ($pointpos1 < 0) ? 0 :(length($refvalue) - $pointpos1 - 1);
- $pointpos2 = rindex($newvalue, '.');
- $digits2 = ($pointpos2 < 0) ? 0 :(length($newvalue) - $pointpos2 - 1);
- $digits = ($digits1 > $digits2) ? $digits1 : $digits2;
- $fmt = "%10.${digits}f";
-
- # print differing values with absolute and relative error
- printf(" %-30s $fmt $fmt $fmt %+7.2f%%\n",
- $statname, $refvalue, $newvalue, $newvalue - $refvalue, $reldiff);
-
- # only print top N errors
- if ($omit_count > 0 && ++$num_errs >= $omit_count)
- {
- print "[... showing top $omit_count errors only, additional errors omitted ...]\n";
- last;
- }
-}
-
-#
-# Report missing stats
-#
-# get count
-$missing_stats = scalar(@missing_stats);
-
-if ($missing_stats)
-{
- print "\nMissing $missing_stats reference statistics:\n\n";
- foreach $stat (@missing_stats)
- {
-# print "\t$stat\n";
- printf " %-50s ", $stat;
- print "$$refhash{$stat}\n";
- }
-}
-
-#
-# Any stats left in newhash are added since the reference file
-#
-
-@added_stats = keys %$newhash;
-
-# get count
-$added_stats = scalar(@added_stats);
-
-if ($added_stats)
-{
- print "\nFound $added_stats new statistics:\n\n";
- foreach $stat (sort @added_stats)
- {
-# print "\t$stat\n";
- printf " %-50s ", $stat;
- print "$$newhash{$stat}\n";
- }
-}
-
-cleanup();
-# Exit codes:
-# 0 if all stats are found (with no extras) & no stats error
-# 1 if there are additional stats, but no stat errors
-# 2 otherwise
-$no_hard_errors = $missing_stats == 0 && $max_err_mag == 0.0;
-$status = $no_hard_errors ? ($added_stats == 0 ? 0 : 1) : 2;
-exit $status;
-
-sub cleanup
-{
- unlink($refheader) if ($refheader);
- unlink($newheader) if ($newheader);
-}
+++ /dev/null
-# Copyright (c) 2017 Mark D. Hill and David A. Wood
-# All rights reserved.
-#
-# Redistribution and use in source and binary forms, with or without
-# modification, are permitted provided that the following conditions are
-# met: redistributions of source code must retain the above copyright
-# notice, this list of conditions and the following disclaimer;
-# redistributions in binary form must reproduce the above copyright
-# notice, this list of conditions and the following disclaimer in the
-# documentation and/or other materials provided with the distribution;
-# neither the name of the copyright holders nor the names of its
-# contributors may be used to endorse or promote products derived from
-# this software without specific prior written permission.
-#
-# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
-# "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
-# LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
-# A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
-# OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
-# SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
-# LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
-# DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
-# THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
-# (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
-# OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
-
-'''
-New version of the run.py script. For this, all dependencies should be
-handled outside of the script.
-
-.. warning:: This script is NOT the recommended way to handle configurations
- for new tests. This exists for legacy support only. New Tests should
- either use configs from the normal gem5 configs or create their own for
- a test.
-'''
-import argparse
-import sys
-import os
-from os.path import abspath, join as joinpath, dirname
-
-import m5
-
-# Add the normal gem5 config path to system path.
-# This requirement should be removed if possible from all legacy scripts, but
-# I've left it here for now.
-sys.path.insert(0, abspath(joinpath(dirname(__file__), '../../configs')))
-
-# set default maxtick... script can override
-# -1 means run forever
-maxtick = m5.MaxTick
-
-def run_test(root):
- """Default run_test implementations. Scripts can override it."""
-
- # instantiate configuration
- m5.instantiate()
-
- # simulate until program terminates
- exit_event = m5.simulate(maxtick)
- print 'Exiting @ tick', m5.curTick(), 'because', exit_event.getCause()
-
-test_progs = os.environ.get('M5_TEST_PROGS', '/dist/m5/regression/test-progs')
-
-# Since we're in batch mode, dont allow tcp socket connections
-m5.disableAllListeners()
-
-parser = argparse.ArgumentParser()
-parser.add_argument('--cmd',
- action='store',
- type=str,
- help='Command to pass to the test system')
-parser.add_argument('--executable',
- action='store',
- type=str,
- help='Executable to pass to the test system')
-parser.add_argument('--config',
- action='append',
- type=str,
- help='A config file to initialize the system with.'\
- + ' If more than one given, loads them in order given.')
-args = parser.parse_args()
-
-executable = args.executable
-
-for config in args.config:
- exec(compile(open(config).read(), config, 'exec'))
-
-# Initialize all CPUs in a system
-def initCPUs(sys):
- def initCPU(cpu):
- # We might actually have a MemTest object or something similar
- # here that just pretends to be a CPU.
- try:
- cpu.createThreads()
- except:
- pass
-
- # The CPU attribute doesn't exist in some cases, e.g. the Ruby testers.
- if not hasattr(sys, "cpu"):
- return
-
- # The CPU can either be a list of CPUs or a single object.
- if isinstance(sys.cpu, list):
- [ initCPU(cpu) for cpu in sys.cpu ]
- else:
- initCPU(sys.cpu)
-
-# TODO: Might want to automatically place the cmd and executable on the
-# cpu[0].workload, although I think most legacy configs do this automatically
-# or somewhere in their `test.py` config.
-
-
-# We might be creating a single system or a dual system. Try
-# initializing the CPUs in all known system attributes.
-for sysattr in [ "system", "testsys", "drivesys" ]:
- if hasattr(root, sysattr):
- initCPUs(getattr(root, sysattr))
-
-run_test(root)