(no commit message)

diff --git a/HDL_workflow/ECP5_FPGA.mdwn b/HDL_workflow/ECP5_FPGA.mdwn
index efb2b852311d1ab0b8d81ed60fc4b3709c074b9e..743b58b47d65456715c27a1db53e6c172ab3c4dc 100644 (file)
--- a/HDL_workflow/ECP5_FPGA.mdwn
+++ b/HDL_workflow/ECP5_FPGA.mdwn
@@ -38,7 +38,7 @@ Follow this section if you have the ULX3S FPGA:
 |         | Wire the **RED** jumper cable to (**ULX3S pin #2**) then wire it to (**STLINKv2 pin #2**), this will serve as the **Voltage Reference** signal (**VREF**) |
 |         | Wire the **BLACK** jumper cable to (**ULX3S pin #4**) then wire it to (**STLINKv2 pin #4**), this will serve as the **Ground** signal (**GND**) |
 |         | Wire the **GREEN** jumper cable to (**ULX3S pin #5**) then wire it to (**STLINKv2 pin #5**), this will serve as the **Test Data In** signal (**TDI**) |
-|         | Wire the **BLUE** jumper cable to (**ULX3S pin #6**) then wire it to (**STLINKv2 pin#7**), this will serve as the **Test Mode Select** signal (**TMS**) |
+|         | Wire the **BLUE** jumper cable to (**ULX3S pin #6**) then wire it to (**STLINKv2 pin #7**), this will serve as the **Test Mode Select** signal (**TMS**) |
 |         | Wire the **WHITE** jumper cable to (**ULX3S pin #7**) then wire it to (**STLINKv2 pin #9**), this will serve as the **Test Clock** signal (**TCK**) |
 |         | Wire the **YELLOW** jumper cable to (**ULX3S pin #8**) then wire it to (**STLINKv2 pin #13**), this will serve as the **Test Data Out** signal (**TDO**) |
 
@@ -49,7 +49,7 @@ Follow this section if you have the Versa ECP5 FPGA:
 |         | Wire the **RED** jumper cable to (**X3 pin #39**) then wire it to (**STLINKv2 pin #2**), this will serve as the **Voltage Reference** signal (**VREF**) |
 |         | Wire the **BLACK** jumper cable to (**X3 pin #1**) then wire it to (**STLINKv2 pin #4**), this will serve as the **Ground** signal (**GND**) |
 |         | Wire the **GREEN** jumper cable to (**X3 pin #4**) then wire it to (**STLINKv2 pin #5**), this will serve as the **Test Data In** signal (**TDI**) |
-|         | Wire the **BLUE** jumper cable to (**X3 pin #5**) then wire it to (**STLINKv2 pin#7**), this will serve as the **Test Mode Select** signal (**TMS**) |
+|         | Wire the **BLUE** jumper cable to (**X3 pin #5**) then wire it to (**STLINKv2 pin #7**), this will serve as the **Test Mode Select** signal (**TMS**) |
 |         | Wire the **WHITE** jumper cable to (**X3 pin #6**) then wire it to (**STLINKv2 pin #9**), this will serve as the **Test Clock** signal (**TCK**) |
 |         | Wire the **YELLOW** jumper cable to (**X3 pin #7**) then wire it to (**STLINKv2 pin #13**), this will serve as the **Test Data Out** signal (**TDO**) |